P RODUC T S 20 20

PISTOL PRODUCTS
ZEV// O.Z-9 SIZE COMPARISON

O.Z-9 FDE MODELS

STANDARD FRAME

STANDARD COVERT

COMPACT FRAME

COMPACT X MODEL

O.Z-9 BLACK (DLC) MODELS

STANDARD FRAME

STANDARD COVERT

COMPACT FRAME

COMPACT X MODEL

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// O.Z-9 STANDARD
ZEV Technologies’ first complete pistol, with everything built entirely from
the ground up by ZEV.
The O.Z-9 was designed and created for balance. It’s one of the first things
you notice when holding this pistol. Balance equates to what every shooter
is looking for; a more controllable pistol with less felt recoil, less muzzle
flip and faster, more accurate follow-up shots.
At the heart of the O.Z-9 is our patented Steel Receiver. This solid steel
frame runs the length of the entire pistol allowing the locking block to be
fully integrated. The extended rails in the steel receiver help provide more
than double the surface area of contact to the slide. Additional benefits
include channels that clear out debris while also acting as lubricating
reservoirs for high friction areas.
Having a singular component for the slide to travel along minimizes
vibration and recoil energy by dispersing it along the receiver through the
custom grip. A single take-down pin conveniently located at the front of the
trigger guard locks the removable grip to the steel receiver.
By design, the trigger is housed in the steel receiver allowing for future grip
upgrades without completely breaking down the pistol. Our improved grips
• BLACK DLC BARREL • BLACK DLC THREADED BARREL
have steeper angles, and forward hand position keeping the muzzle down,
• FIBER OPTIC FRONT SIGHT • FIBER OPTIC FRONT SIGHT
and pointing straighter.
Additional grip sizes and colors, along with multiple sized magwells, are
available to facilitate further customization by end-users. The O.Z-9 is
compatible with ZEV components and accepts GLOCK® mags.
The O.Z-9 Standard includes the following:
• ZEV Exclusive O.Z-9 Standard Signature Slide
• ZEV Optimized Match Grade Barrel
• ZEV PRO Flat Face Trigger
• ZEV O.Z-9 PRO Plus Magwell
• ZEV O.Z-9 Custom SKB Case
• Magpul PMAG® 17 GL9® . ..................................... Qty: 2

ZEV O.Z-9 Standard Specifications:

Caliber Trigger Pull Width Height Weight
9mm 4.5 lbs. 1.624” 5.522” 28 oz.
Overall Length: Non-Threaded Threaded
8.039” 8.3125"

• BRONZE BARREL • BRONZE THREADED BARREL

• FIBER OPTIC FRONT SIGHT • FIBER OPTIC FRONT SIGHT

• PATENTED O.Z-9 STEEL RECEIVER (SERIALIZED FIREARM)

• SINGLE PIN GRIP REMOVAL MODULARITY

OPTIMIZED BARREL SIGHTS TRIGGER/SAFETY COLOR SKU

DLC FIBER OPTIC BLACK/BLACK OZ9-STD-B-B
THREADED - DLC FIBER OPTIC BLACK/BLACK OZ9-STD-B-B-TH
BRONZE FIBER OPTIC BLACK/RED OZ9-STD-B-BRZ
THREADED - BRONZE FIBER OPTIC BLACK/RED OZ9-STD-B-BRZ-TH
100%
MADEDLC
IN USA NIGHT SIGHTS BLACK/BLACK OZ9-STD-B-B-NS
• BLACK DLC BARREL
100% • NIGHT SIGHTS
MADE IN USA
100%
MADE IN USA

100%
MADE
2120 IN USA DRIVE • CENTRALIA, WA 98531
NORTHPARK ZEVTECH.COM
ZEV// O.Z-9 STANDARD FDE
ZEV Technologies’ first complete pistol, with everything built entirely from
the ground up by ZEV.
The O.Z-9 was designed and created for balance. It’s one of the first things
you notice when holding this pistol. Balance equates to what every shooter
is looking for; a more controllable pistol with less felt recoil, less muzzle
flip and faster, more accurate follow-up shots.
At the heart of the O.Z-9 is our patented Steel Receiver. This solid steel
frame runs the length of the entire pistol allowing the locking block to be
fully integrated. The extended rails in the steel receiver help provide more
than double the surface area of contact to the slide. Additional benefits
include channels that clear out debris while also acting as lubricating
reservoirs for high friction areas.
Having a singular component for the slide to travel along minimizes
vibration and recoil energy by dispersing it along the receiver through the
custom grip. A single take-down pin conveniently located at the front of the
trigger guard locks the removable grip to the steel receiver.
By design, the trigger is housed in the steel receiver allowing for future grip
upgrades without completely breaking down the pistol. Our improved grips
have steeper angles, and forward hand position keeping the muzzle down,
and pointing straighter.
Additional grip sizes and colors, along with multiple sized magwells, are
available to facilitate further customization by end-users. The O.Z-9 is
compatible with ZEV components and accepts GLOCK® mags.
The O.Z-9 Standard FDE includes the following:
• ZEV Exclusive O.Z-9 Standard Signature Slide................................ FDE
• ZEV Optimized Match Grade Threaded Barrel................................. DLC
• ZEV PRO Flat Face Trigger............................................. BLACK/BLACK
• ZEV O.Z-9 Grip................................................................................. FDE
• ZEV O.Z-9 PRO Plus Magwell
• ZEV O.Z-9 Custom SKB Case O.Z-9 STANDARD FDE SLIDE
• Magpul PMAG® 17 GL9® . .............................................................Qty: 2

ZEV O.Z-9 Standard Specifications:

Caliber Trigger Pull Width Height Length (overall) Weight
9mm 4.5 lbs. 1.624” 5.522” 8.3125” 28 oz.

OPTIMIZED BARREL SIGHTS TRIGGER/SAFETY COLOR SKU

THREADED - DLC FIBER OPTIC BLACK/BLACK OZ9-STD-FDE-B-TH O.Z-9 RECEIVER

O.Z-9 TAKE-DOWN PIN

• UNIVERSAL (O.Z-9 & O.Z-9C)

MAGPUL PMAG® 17 GL9®

• 17 ROUND MAGAZINE

O.Z-9 FDE GRIP

• ACCEPTS 17 ROUND MAGAZINE
100%
MADE IN USA
100%
MADE IN USA
O.Z-9 PRO PLUS MAGWELL
100% • UNIVERSAL (O.Z-9 & O.Z-9C)
MADE IN USA

100%
MADE
2120 IN USA DRIVE • CENTRALIA, WA 98531
NORTHPARK ZEVTECH.COM
ZEV// O.Z-9 COVERT
The O.Z-9 Covert combines the standard length O.Z-9 receiver and slide
with the Shorty grip and low profile PRO magwell to create a pistol that is
easier to conceal than the O.Z-9 Standard yet just as accurate.
The O.Z-9 was designed and created for balance. It’s one of the first things
you notice when holding this pistol. Balance equates to what every shooter
is looking for; a more controllable pistol with less felt recoil, less muzzle
flip and faster, more accurate follow-up shots.
At the heart of the O.Z-9 is our patented Steel Receiver. This solid steel
frame runs the length of the entire pistol allowing the locking block to be
fully integrated. The extended rails in the steel receiver help provide more
than double the surface area of contact to the slide. Additional benefits
include channels that clear out debris while also acting as lubricating
reservoirs for high friction areas.
Having a singular component for the slide to travel along minimizes
vibration and recoil energy by dispersing it along the receiver through the
custom grip. A single take-down pin conveniently located at the front of the
trigger guard locks the removable grip to the steel receiver.
By design, the trigger is housed in the steel receiver allowing for future grip
upgrades without completely breaking down the pistol. Our improved grips
have steeper angles, and forward hand position keeping the muzzle down,
and pointing straighter.
Additional grip sizes and colors, along with multiple sized magwells, are
available to facilitate further customization by end-users. The O.Z-9 is
compatible with ZEV components and accepts GLOCK® mags.
The O.Z-9 Covert includes the following:
• ZEV Exclusive O.Z-9 Standard Signature Slide..................................DLC
• ZEV Optimized Match Grade Barrel............................................BRONZE
• ZEV PRO Flat Face Trigger................................................... BLACK/RED
• ZEV O.Z-9 Shorty Grip................................................................... BLACK
O.Z-9 STANDARD SLIDE
• ZEV O.Z-9 PRO Magwell
• ZEV O.Z-9 Custom SKB Case
• Magpul PMAG® 15 GL9® . .............................................................. Qty: 2

ZEV O.Z-9 Covert Specifications:

Caliber Trigger Pull Width Height Length (overall) Weight
9mm 4.5 lbs. 1.624” 5.022” 8.039” 28 oz.
O.Z-9 RECEIVER

OPTIMIZED BARREL SIGHTS TRIGGER/SAFETY COLOR SKU

BRONZE FIBER OPTIC BLACK/RED OZ9-STD-COVERT-B-BRZ

O.Z-9 TAKE-DOWN PIN

• UNIVERSAL (O.Z-9 & O.Z-9C)

O.Z-9 SHORTY GRIP

• ACCEPTS 15 & 17 ROUND MAGAZINE

100% O.Z-9 PRO MAGWELL

MADE IN USA • UNIVERSAL (O.Z-9 & O.Z-9C)
100% MAGPUL PMAG® 15 GL9®
MADE IN USA • 15 ROUND MAGAZINE
100% MAGPUL PMAG® 17 GL9®
MADE IN USA • 17 ROUND MAGAZINE (NOT INCLUDED)

100%
MADE
2120 IN USA DRIVE • CENTRALIA, WA 98531
NORTHPARK ZEVTECH.COM
ZEV// O.Z-9 COVERT FDE
The O.Z-9 Covert combines the standard length O.Z-9 receiver and slide
with the Shorty grip and low profile PRO magwell to create a pistol that is
easier to conceal than the O.Z-9 Standard yet just as accurate.
The O.Z-9 was designed and created for balance. It’s one of the first things
you notice when holding this pistol. Balance equates to what every shooter
is looking for; a more controllable pistol with less felt recoil, less muzzle
flip and faster, more accurate follow-up shots.
At the heart of the O.Z-9 is our patented Steel Receiver. This solid steel
frame runs the length of the entire pistol allowing the locking block to be
fully integrated. The extended rails in the steel receiver help provide more
than double the surface area of contact to the slide. Additional benefits
include channels that clear out debris while also acting as lubricating
reservoirs for high friction areas.
Having a singular component for the slide to travel along minimizes
vibration and recoil energy by dispersing it along the receiver through the
custom grip. A single take-down pin conveniently located at the front of the
trigger guard locks the removable grip to the steel receiver.
By design, the trigger is housed in the steel receiver allowing for future grip
upgrades without completely breaking down the pistol. Our improved grips
have steeper angles, and forward hand position keeping the muzzle down,
and pointing straighter.
Additional grip sizes and colors, along with multiple sized magwells, are
available to facilitate further customization by end-users. The O.Z-9 is
compatible with ZEV components and accepts GLOCK® mags.
The O.Z-9 Covert includes the following:
• ZEV Exclusive O.Z-9 Standard Signature Slide.................................. FDE
• ZEV Optimized Match Grade Barrel...................................................DLC
• ZEV PRO Flat Face Trigger...............................................BLACK/BLACK
• ZEV O.Z-9 Shorty Grip................................................................... BLACK
O.Z-9 STANDARD SLIDE
• ZEV O.Z-9 PRO Magwell
• ZEV O.Z-9 Custom SKB Case
• Magpul PMAG® 15 GL9® . .............................................................. Qty: 2

ZEV O.Z-9 Covert Specifications:

Caliber Trigger Pull Width Height Length (overall) Weight
9mm 4.5 lbs. 1.624” 5.022” 8.039” 28 oz.
O.Z-9 RECEIVER

OPTIMIZED BARREL SIGHTS TRIGGER/SAFETY COLOR SKU

DLC FIBER OPTIC BLACK/BLACK OZ9-STD-COVERT-FDE-B

O.Z-9 TAKE-DOWN PIN

• UNIVERSAL (O.Z-9 & O.Z-9C)

O.Z-9 SHORTY GRIP

• ACCEPTS 15 & 17 ROUND MAGAZINE

100% O.Z-9 PRO MAGWELL

MADE IN USA • UNIVERSAL (O.Z-9 & O.Z-9C)
100% MAGPUL PMAG® 15 GL9®
MADE IN USA • 15 ROUND MAGAZINE
100% MAGPUL PMAG® 17 GL9®
MADE IN USA • 17 ROUND MAGAZINE (NOT INCLUDED)

100%
MADE
2120 IN USA DRIVE • CENTRALIA, WA 98531
NORTHPARK ZEVTECH.COM
ZEV// O.Z-9 COMBAT
The ZEV O.Z-9 Combat features all the same functionality and
modularity of the O.Z-9 in a configuration optimized for durability without
compromising on performance. Built with ZEV’s windowless Citadel slide,
PRO match barrel, and PRO Curved Face Trigger, the O.Z-9 Combat is
tailored to meet the stringent requirements of the discerning professional
user.
The O.Z-9 was designed and created for balance. It’s one of the first things
you notice when holding this pistol. Balance equates to what every shooter
is looking for; a more controllable pistol with less felt recoil, less muzzle
flip and faster, more accurate follow-up shots.
At the heart of the O.Z-9 is our patented Steel Receiver. This solid steel
frame runs the length of the entire pistol allowing the locking block to be
fully integrated. The extended rails in the steel receiver help provide more
than double the surface area of contact to the slide. Additional benefits
include channels that clear out debris while also acting as lubricating
reservoirs for high friction areas.
Having a singular component for the slide to travel along minimizes
vibration and recoil energy by dispersing it along the receiver through the
custom grip. A single take-down pin conveniently located at the front of the
trigger guard locks the removable grip to the steel receiver.
By design, the trigger is housed in the steel receiver allowing for future grip
upgrades without completely breaking down the pistol. Our improved grips
have steeper angles, and forward hand position keeping the muzzle down,
and pointing straighter.
Additional grip sizes and colors, along with multiple sized magwells
are available for you to fully customize your O.Z-9 to best fit your
requirements.
Additional grip sizes and colors, along with multiple sized magwells, are • BLACK DLC BARREL
available to facilitate further customization by end-users. The O.Z-9 is • FIBER OPTIC FRONT SIGHT
compatible with ZEV components and accepts GLOCK® mags.
The O.Z-9 Combat includes the following:
• ZEV Citadel Slide.................................................................................DLC
• ZEV PRO Barrel...................................................................... BLACK DLC
• ZEV PRO Curved Face Trigger.......................................... BLACK/BLACK
• Magpul PMAG® 17 GL9® . ...............................................................Qty: 2

ZEV O.Z-9 Combat Specifications:

Caliber Trigger Pull Width Height Length (overall) Weight
9mm 4.5 lbs. 1.624” 5.522” 8.039” 28 oz.

• PATENTED O.Z-9 STEEL RECEIVER (SERIALIZED FIREARM)

• SINGLE PIN GRIP REMOVAL MODULARITY

PRO BARREL SIGHTS TRIGGER/SAFETY COLOR SKU

DLC FIBER OPTIC BLACK/BLACK OZ9-STD-COMBAT-B-B
DLC NIGHT SIGHTS BLACK/BLACK OZ9-STD-COMBAT-B-B-NS

100% • BLACK DLC BARREL

MADE IN USA • NIGHT SIGHTS

100%
MADE IN USA
100%
MADE IN USA

100%
MADE
2120 IN USA DRIVE • CENTRALIA, WA 98531
NORTHPARK ZEVTECH.COM
ZEV// O.Z-9 COMPETITION
The O.Z-9 Competition model is approved for both USPSA Carry Optics
and Production divisions (with the magwell removed). Designed in
collaboration with five-time World Speed Shooting Champion and ZEV
Technologies Shooting Team Captain, KC Eusebio, the Competition Model
O.Z-9 features an exclusive KC Signature G34 length slide, coated Black
DLC and cut for a Trijicon RMR optic.
The O.Z-9 was designed and created for balance. It’s one of the first things
you notice when holding this pistol. Balance equates to what every shooter
is looking for; a more controllable pistol with less felt recoil, less muzzle
flip and faster, more accurate follow-up shots.
At the heart of the O.Z-9 is our patented Steel Receiver. This solid steel
frame runs the length of the entire pistol allowing the locking block to be
fully integrated. The extended rails in the steel receiver help provide more
than double the surface area of contact to the slide. Additional benefits
include channels that clear out debris while also acting as lubricating
reservoirs for high friction areas.
Having a singular component for the slide to travel along minimizes
vibration and recoil energy by dispersing it along the receiver through the
custom grip. A single take-down pin conveniently located at the front of the
trigger guard locks the removable grip to the steel receiver.
By design, the trigger is housed in the steel receiver allowing for future grip
upgrades without completely breaking down the pistol. Our improved grips
have steeper angles, and forward hand position keeping the muzzle down,
and pointing straighter.
Additional grip sizes and colors, along with multiple sized magwells, are
available to facilitate further customization by end-users. The O.Z-9 is
compatible with ZEV components and accepts GLOCK® mags.

The O.Z-9 includes the following:

• ZEV O.Z-9 KC Eusebio Signature G34 Slide.........................................DLC
• Slide Optic Cut....................................................................................RMR
O.Z-9 COMPETITION SLIDE

• ZEV O.Z-9 Grip................................................................................ BLACK

• ZEV Optimized Match Grade Barrel..............................................BRONZE
• ZEV PRO Flat Face Trigger.....................................................BLACK/RED
• ZEV O.Z-9 PRO Plus Magwell
• ZEV O.Z-9 Custom SKB Case
• Magpul PMAG® 17 GL9® . ................................................................ Qty: 2 O.Z-9 RECEIVER

ZEV O.Z-9 Covert Specifications:

Caliber Trigger Pull Width Height Length (overall) Weight
9mm 4.5 lbs. 1.624” 5.522” 8.75” 29.44 oz.

MODEL GRIP BARREL SKU

KC COMPETITION BLACK MATCH - BRZ OZ9-COMP-B-BRZ O.Z-9 TAKE-DOWN PIN
• UNIVERSAL (O.Z-9 & O.Z-9C)

MAGPUL PMAG® 17 GL9®

• 17 ROUND MAGAZINE

O.Z-9 GRIP
• ACCEPTS 17 ROUND MAGAZINE

100%
MADE IN USA
100%
MADE IN USA
O.Z-9 PRO PLUS MAGWELL
100% • UNIVERSAL (O.Z-9 & O.Z-9C)
MADE IN USA

100%
MADE
2120 IN USA DRIVE • CENTRALIA, WA 98531
NORTHPARK ZEVTECH.COM
ZEV// O.Z-9 GRIP KIT STANDARD
Modify your O.Z-9 with standard size grip kits available in Flat Dark Earth
(FDE) and Gray. Easily customize the look of your O.Z-9 with a different
colored grip. Simply remove the take-down pin, install the new grip and
reinstall the take-down pin.

ZEV O.Z-9 Grip Kit features:

• No need to remove the trigger
• Ready to install out of the box
• ZEV Gen4 Magazine Release installed
• Take-down pin included

MODEL COLOR SKU

STANDARD BLACK GRIP.KIT-OZ9-STD-B
STANDARD FLAT DARK EARTH (FDE) GRIP.KIT-OZ9-STD-FDE
STANDARD GRAY GRIP.KIT-OZ9-STD-GRY

100%
MADE IN USA

100%
MADE IN USA
OZ9 PRO
100%Plus Magwell (shown) sold separately
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK STREET • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// O.Z-9 GRIP KIT STANDARD SHORTY
The O.Z-9 Shorty grip was designed for those looking to run a compact
sized grip on the O.Z-9 Standard. Switch between competition and
concealed carry with the same firearm. Simply remove the take-down pin,
swap grips, and re-install the take-down pin. No need to remove the trigger,
as it remains installed in the O.Z-9 receiver. Trigger pins are housed by the
grip internally, not through the grip like other platforms.

ZEV O.Z-9 Shorty Grip Kit features:

• Ready to install out of the box
• ZEV Gen4 Magazine Release installed
• Take-down pin included

MODEL COLOR SKU

STANDARD BLACK GRIP.KIT-OZ9-SHORTY-B
STANDARD FLAT DARK EARTH (FDE) GRIP.KIT-OZ9-SHORTY-FDE
STANDARD GRAY GRIP.KIT-OZ9-SHORTY-GRY

NOTE: O.Z-9 Shorty grips are not compatible nor interchangeable

with the Compact O.Z-9.
• O.Z-9 Shorty Grip is compatible with both G19 and G17 size
magazines
• O.Z-9 Standard Grip is compatible with G17 size magazines.

Achieve maximum versatility with O.Z-9 modularity

• One gun, two grip sizes, three available colors

O.Z-9 STANDARD RECEIVER

O.Z-9 SHORTY GRIP O.Z-9 STANDARD GRIP

O.Z-9 STANDARD SLIDE O.Z-9 STANDARD SLIDE

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK STREET • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// O.Z-9 STANDARD MODULAR BUILD KIT – MBK
The O.Z-9 Modular Build Kit (MBK) offers complete customization to
build your O.Z-9 from the ground up. Start your custom build by choosing
between a Black DLC or Titanium Gray colored O.Z-9 steel receiver.
Using compatible ZEV components, you get to pick and choose your ZEV
slide, ZEV barrel, ZEV trigger, ZEV O.Z-9 grip, and ZEV O.Z-9 magwell to
build the O.Z-9 that best fits your needs, whether its duty, concealed carry,
competition or a week-end range gun.
Machined from a single block of 414o alloy steel, the patented O.Z-9
internal steel receiver reduces the flex associated with polymer frames,
has an integrated locking block and longer slide rails which provide more
contact with the slide. This amounts to less felt recoil, less muzzle flip,
BLACK (DLC)
faster follow up shots and improved accuracy.
In addition to an O.Z-9 Steel Receiver in either color, each O.Z-9 MBK
includes the following necessary components to complete your build:
• ZEV O.Z-9 Slide Lock Lever and Spring
• ZEV O.Z-9 Trigger Pin
• ZEV O.Z-9 Ejector Housing Pin
• ZEV Enhanced Extractor
• Extended Slide Release Lever

MODEL BLACK DLC TITANIUM GRAY

TITANIUM GRAY (GRY)
O.Z-9 STANDARD O.Z-9-MBK-DLC O.Z-9-MBK-GRY

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// O.Z-9 STANDARD MBK ESSENTIAL PARTS KIT
The Essential Parts Kit for the O.Z-9 MBK includes all of the internal
components necessary to assemble a complete O.Z-9 pistol with the
purchase of an O.Z-9 MBK, ZEV stripped slide, ZEV trigger bar, ZEV barrel,
ZEV guide rod and recoil spring, ZEV sights, ZEV O.Z-9 grip, and ZEV O.Z-9
magwell.

Additionally the O.Z-9 MBK Essential Parts Kit includes a Glock tool kit
with a punch and front sight tool to facilitate assembly and maintenance
of your pistol.

The O.Z-9 MBK parts kit includes the following components:

• ZEV Slide Backplate

• ZEV Skeletonized Striker
• ZEV PRO Striker Spring
• ZEV Firing Pin Safety
• ZEV Firing Pin Safety Spring
• ZEV Trigger Spring
• Glock Gen3 9mm Ejector Housing
• Glock Striker Sleeve
• Glock Spring Cups
• Glock Extractor Rod, Bearing, and Spring
• Fix it Stick Glock Tool Kit

MODEL SKU
O.Z-9 STANDARD PK-OZ9-MBK

Additional ZEV parts needed to build a custom O.Z-9:

(not included with the MBK Parts Kit, sold separately)

ZEV SLIDE AND SIGHTS

ZEV O.Z-9 MAGWELL

ZEV O.Z-9 GRIP

ZEV RECOIL SPRINGS

ZEV GUIDE ROD

ZEV BARREL

ZEV O.Z-9 MBK WITH ZEV ENHANCED EXTRACTOR

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA ZEV TRIGGER BAR WITH ZEV CONNECTOR

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// O.Z-9 STANDARD MODULAR PARTS KIT (MBK) ZEV PRODUCT COMPATIBILITY
ZEV SIGHTS
• SIGHT.SET-215-FO-COM3-B
• SIGHT.SET-300-CW-B-CW-B

ZEV SLIDE
• SLD-Z17-3G-OMEN-RMR-DLC
• SLD-Z17-3G-OMEN-RMR-GRY
• SLD-Z17-3G-ORION-RMR-DLC
• SLD-Z17-3G-ORION-RMR-GRY
• SLD-Z34-3G-OMEN-RMR-DLC
• SLD-Z34-3G-OMEN-RMR-GRY
• SLD-Z34-3G-ORION-RMR-DLC
• SLD-Z34-3G-ORION-RMR-GRY

ZEV BARREL
• BBL-17-D
• BBL-17-D.S
• BBL-17-D.S-BRZ
• BBL-17-D.S-DLC
• BBL-17-D-BRZ
• BBL-17-D-DLC
• BBL-34-D
• BBL-34-D-BRZ
• BBL-34-D-DLC

ZEV GUIDE ROD

• G.ROD-STD-SS

ZEV RECOIL SPRING

• ISMI-SPR-REC-13L
• ISMI-SPR-REC-15L
• ISMI-SPR-REC-17L

ZEV O.Z-9 STANDARD MODULAR BUILD KIT (MBK)

• OZ9-MBK-DLC
• OZ9-MBK-GRY

ZEV O.Z-9 STANDARD MBK PARTS KIT

• PK-OZ9-MBK

ZEV TRIGGER BAR

• FFT-PRO-BAR-SM-B-B
• FFT-PRO-BAR-SM-B-R
• CFT-PRO-BAR-SM-B-B
• CFT-PRO-BAR-SM-B-R

ZEV O.Z-9 STANDARD GRIP KIT

• GRIP.KIT-OZ9-STD-B
• GRIP.KIT-OZ9-STD-FDE
• GRIP.KIT-OZ9-STD-GRY

ZEV O.Z-9 MAGWELL

• MW.K-OZ9-PRO-PLUS-B

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// O.Z-9C COMPACT
ZEV Technologies’ first complete pistol, built entirely from the ground up,
is now available in a compact model. All the same great features as the
standard sized O.Z-9, the compact blurs the line between personal defense,
concealed carry and a duty pistol. The slimmed-down PRO magwell enhances
grip comfort while minimizing printing while carrying concealed.
The O.Z-9C was designed and created for balance. It’s one of the first things
you notice when holding this pistol. Balance equates to what every shooter is
looking for; a more controllable pistol with less felt recoil, less muzzle flip and
faster, more accurate follow-up shots.
At the heart of the O.Z-9C is our patented Steel Receiver. This solid steel
frame runs the length of the entire pistol allowing the locking block to be fully
integrated. The extended rails in the steel receiver help provide more than
double the surface area of contact to the slide. Additional benefits include
channels that clear out debris while also acting as lubricating reservoirs for
high friction areas.
Having a singular component for the slide to travel along minimizes vibration
and recoil energy by dispersing it along the receiver through the custom grip.
A single take-down pin conveniently located at the front of the trigger guard
locks the removable grip to the steel receiver. • BLACK DLC BARREL • BLACK DLC THREADED BARREL
• FIBER OPTIC FRONT SIGHT • FIBER OPTIC FRONT SIGHT
By design, the trigger is housed in the steel receiver allowing for future grip
upgrades without completely breaking down the pistol. Our improved grips
have steeper angles, and forward hand position keeping the muzzle down, and
pointing straighter.
Additional grip sizes and colors, different length conversion slides, and
multiple sized magwells are available to facilitate further customization
by end-users. The O.Z-9C is compatible with ZEV components and accepts
GLOCK® mags.
The O.Z-9C Compact includes the following:
• ZEV Exclusive O.Z-9C Compact Signature Slide
• ZEV Optimized Match Grade Barrel
• ZEV PRO Flat Face Trigger
• ZEV O.Z-9 PRO Magwell
• ZEV O.Z-9 Custom SKB Case
• Magpul PMAG® 19 GL9® . ..................................... Qty: 2

ZEV O.Z-9C Compact Specifications:

Caliber Trigger Pull Width Height Weight
9mm 4.5 lbs. 1.624” 5.022” 26.25 oz.
Overall Length: Non-Threaded Threaded
• BRONZE BARREL • BRONZE THREADED BARREL
7.3” 7.6125" • FIBER OPTIC FRONT SIGHT • FIBER OPTIC FRONT SIGHT

NOTE: O.Z-9C specific parts (slide, barrel, grip) are

NOT COMPATIBLE nor interchangeable with the O.Z-9.

• PATENTED O.Z-9 STEEL RECEIVER (SERIALIZED FIREARM)

• SINGLE PIN GRIP REMOVAL MODULARITY

OPTIMIZED BARREL SIGHTS TRIGGER/SAFETY COLOR SKU

DLC FIBER OPTIC BLACK/BLACK OZ9C-CPT-B-B
THREADED - DLC FIBER OPTIC BLACK/BLACK OZ9C-CPT-B-B-TH
100%
BRONZE FIBER OPTIC BLACK/RED OZ9C-CPT-B-BRZ
MADE IN USA • BLACK DLC BARREL
THREADED - BRONZE FIBER OPTIC BLACK/RED OZ9C-CPT-B-BRZ-TH
100% • NIGHT SIGHTS
MADE DLC
IN USA NIGHT SIGHTS BLACK/BLACK OZ9C-CPT-B-B-NS

100%
MADE IN USA

100%
MADE
2120 IN USA DRIVE • CENTRALIA, WA 98531
NORTHPARK ZEVTECH.COM
ZEV// O.Z-9C COMPACT FDE
ZEV Technologies’ first complete pistol, built entirely from the ground
up, is now available in a compact model. All the same great features as
the standard sized O.Z-9, the compact blurs the line between personal
defense, concealed carry and a duty pistol. The slimmed-down PRO
magwell enhances grip comfort while minimizing printing while carrying
concealed.
The O.Z-9C was designed and created for balance. It’s one of the first
things you notice when holding this pistol. Balance equates to what every
shooter is looking for; a more controllable pistol with less felt recoil, less
muzzle flip and faster, more accurate follow-up shots.
At the heart of the O.Z-9C is our patented Steel Receiver. This solid steel
frame runs the length of the entire pistol allowing the locking block to be
fully integrated. The extended rails in the steel receiver help provide more
than double the surface area of contact to the slide. Additional benefits
include channels that clear out debris while also acting as lubricating
reservoirs for high friction areas.
Having a singular component for the slide to travel along minimizes
vibration and recoil energy by dispersing it along the receiver through the
custom grip. A single take-down pin conveniently located at the front of the
trigger guard locks the removable grip to the steel receiver.
By design, the trigger is housed in the steel receiver allowing for future grip
upgrades without completely breaking down the pistol. Our improved grips
have steeper angles, and forward hand position keeping the muzzle down,
and pointing straighter.
Additional grip sizes and colors, different length conversion slides, and
multiple sized magwells are available to facilitate further customization
by end-users. The O.Z-9C is compatible with ZEV components and accepts
GLOCK® mags.
The O.Z-9C Compact FDE includes the following:
• ZEV Exclusive O.Z-9C Compact Signature Slide.............................. FDE O.Z-9C COMPACT SLIDE
• ZEV Optimized Match Grade Threaded Barrel................................. DLC
• ZEV PRO Flat Face Trigger............................................. BLACK/BLACK
• ZEV O.Z-9 Grip................................................................................. FDE
• ZEV O.Z-9 PRO Magwell
• ZEV O.Z-9 Custom SKB Case
• Magpul PMAG® 15 GL9® . .............................................................Qty: 2 O.Z-9C RECEIVER
ZEV O.Z-9C Compact Specifications:
Caliber Trigger Pull Width Height Length (overall) Weight
9mm 4.5 lbs. 1.624” 5.022” 7.6125” 26.25 oz.

OPTIMIZED BARREL SIGHTS TRIGGER/SAFETY COLOR SKU

THREADED - DLC FIBER OPTIC BLACK/BLACK OZ9C-CPT-FDE-B-TH
O.Z-9 TAKE-DOWN PIN
• UNIVERSAL (O.Z-9 & O.Z-9C)

O.Z-9C GRIP
• ACCEPTS 15 & 17 ROUND MAGAZINE

100%
MADE IN USA O.Z-9 PRO MAGWELL
• UNIVERSAL (O.Z-9 & O.Z-9C)
100% MAGPUL PMAG® 15 GL9®
MADE IN USA • 15 ROUND MAGAZINE
100% MAGPUL PMAG® 17 GL9®
MADE IN USA • 17 ROUND MAGAZINE (NOT INCLUDED)
100%
MADE
2120 IN USA DRIVE • CENTRALIA, WA 98531
NORTHPARK ZEVTECH.COM
ZEV// O.Z-9C X
The O.Z-9C X combines the compact O.Z-9C receiver and slide with a full
size X grip and low profile PRO magwell to create a pistol that is easier
to control and handle than the O.Z-9C Compact without added weight or
length.
The O.Z-9C was designed and created for balance. It’s one of the first
things you notice when holding this pistol. Balance equates to what every
shooter is looking for; a more controllable pistol with less felt recoil, less
muzzle flip and faster, more accurate follow-up shots.
At the heart of the O.Z-9C is our patented Steel Receiver. This solid steel
frame runs the length of the entire pistol allowing the locking block to be
fully integrated. The extended rails in the steel receiver help provide more
than double the surface area of contact to the slide. Additional benefits
include channels that clear out debris while also acting as lubricating
reservoirs for high friction areas.
Having a singular component for the slide to travel along minimizes
vibration and recoil energy by dispersing it along the receiver through the
custom grip. A single take-down pin conveniently located at the front of the
trigger guard locks the removable grip to the steel receiver.
By design, the trigger is housed in the steel receiver allowing for future grip
upgrades without completely breaking down the pistol. Our improved grips
have steeper angles, and forward hand position keeping the muzzle down,
and pointing straighter.
Additional grip sizes and colors, different length conversion slides, and
multiple sized magwells are available to facilitate further customization
by end-users. The O.Z-9C is compatible with ZEV components and accepts
GLOCK® mags.

The O.Z-9C X includes the following:

• ZEV Exclusive O.Z-9C Compact Signature Slide.............................. DLC
• ZEV Optimized Match Grade Barrel..........................................BRONZE
• ZEV PRO Flat Face Trigger................................................. BLACK/RED O.Z-9C COMPACT SLIDE
• ZEV O.Z-9C X Grip........................................................................BLACK
• ZEV O.Z-9 PRO Magwell
• ZEV O.Z-9 Custom SKB Case
• Magpul PMAG® 17 GL9® . .............................................................Qty: 2

ZEV O.Z-9C X Specifications:

Caliber Trigger Pull Width Height Length (overall) Weight
9mm 4.5 lbs. 1.624” 5.522” 7.3” 26.25 oz.
O.Z-9C RECEIVER

OPTIMIZED BARREL SIGHTS TRIGGER/SAFETY COLOR SKU

BRONZE FIBER OPTIC BLACK/RED OZ9C-X-CPT-B-BRZ

NOTE: O.Z-9C specific parts (slide, barrel, grip) are

NOT COMPATIBLE nor interchangeable with the O.Z-9. O.Z-9 TAKE-DOWN PIN
• UNIVERSAL (O.Z-9 & O.Z-9C)

MAGPUL PMAG® 17 GL9®

• 17 ROUND MAGAZINE
O.Z-9C X GRIP
• ACCEPTS 17 ROUND MAGAZINE

100%
MADE IN USA
100%
MADE IN USA
O.Z-9 PRO MAGWELL
100% • UNIVERSAL (O.Z-9 & O.Z-9C)
MADE IN USA

100%
MADE
2120 IN USA DRIVE • CENTRALIA, WA 98531
NORTHPARK ZEVTECH.COM
ZEV// O.Z-9C X FDE
The O.Z-9C X combines the compact O.Z-9C receiver and slide with a full
size X grip and low profile PRO magwell to create a pistol that is easier
to control and handle than the O.Z-9C Compact without added weight or
length.
The O.Z-9C was designed and created for balance. It’s one of the first
things you notice when holding this pistol. Balance equates to what every
shooter is looking for; a more controllable pistol with less felt recoil, less
muzzle flip and faster, more accurate follow-up shots.
At the heart of the O.Z-9C is our patented Steel Receiver. This solid steel
frame runs the length of the entire pistol allowing the locking block to be
fully integrated. The extended rails in the steel receiver help provide more
than double the surface area of contact to the slide. Additional benefits
include channels that clear out debris while also acting as lubricating
reservoirs for high friction areas.
Having a singular component for the slide to travel along minimizes
vibration and recoil energy by dispersing it along the receiver through the
custom grip. A single take-down pin conveniently located at the front of the
trigger guard locks the removable grip to the steel receiver.
By design, the trigger is housed in the steel receiver allowing for future grip
upgrades without completely breaking down the pistol. Our improved grips
have steeper angles, and forward hand position keeping the muzzle down,
and pointing straighter.
Additional grip sizes and colors, different length conversion slides, and
multiple sized magwells are available to facilitate further customization
by end-users. The O.Z-9C is compatible with ZEV components and accepts
GLOCK® mags.

The O.Z-9C X includes the following:

• ZEV Exclusive O.Z-9C Compact Signature Slide.............................. FDE
• ZEV Optimized Match Grade Barrel................................................. DLC
• ZEV PRO Flat Face Trigger............................................. BLACK/BLACK O.Z-9C COMPACT SLIDE
• ZEV O.Z-9C X Grip............................................................................ FDE
• ZEV O.Z-9 PRO Magwell
• ZEV O.Z-9 Custom SKB Case
• Magpul PMAG® 17 GL9® . .............................................................Qty: 2

ZEV O.Z-9C X Specifications:

Caliber Trigger Pull Width Height Length (overall) Weight
9mm 4.5 lbs. 1.624” 5.522” 7.3” 26.25 oz. O.Z-9C RECEIVER

OPTIMIZED BARREL SIGHTS TRIGGER/SAFETY COLOR SKU

DLC FIBER OPTIC BLACK/BLACK OZ9C-X-CPT-FDE-B

NOTE: O.Z-9C specific parts (slide, barrel, grip) are

NOT COMPATIBLE nor interchangeable with the O.Z-9.
O.Z-9 TAKE-DOWN PIN
• UNIVERSAL (O.Z-9 & O.Z-9C)

MAGPUL PMAG® 17 GL9®

• 17 ROUND MAGAZINE O.Z-9C X GRIP
• ACCEPTS 17 ROUND MAGAZINE

100%
MADE IN USA
100%
MADE IN USA O.Z-9 PRO MAGWELL
100%
• UNIVERSAL (O.Z-9 & O.Z-9C)
MADE IN USA

100%
MADE
2120 IN USA DRIVE • CENTRALIA, WA 98531
NORTHPARK ZEVTECH.COM
ZEV// O.Z-9C HYPER-COMP
The O.Z-9C Hyper-comp brings the benefits of a compensator to the
popular compact platform without adding any extra length or mass. The
Hyper-comp features four tapered vertical ports integrated into the top of
the barrel that vents gases upward to reduce muzzle rise, creating one of
the flattest shooting compacts available.
The slide has a top channel cut-out that extends to the front of the barrel
opening, allowing the front sight to be pinned directly to the barrel, making
it easier to track the sight during recoil as it does not reciprocate with the
slide. This unique ported barrel design allows for easy barrel disassembly
for cleaning and maintenance that compensated guns typically need,
without having to remove a compensator.
The O.Z-9C was designed and created for balance. It’s one of the first
things you notice when holding this pistol. Balance equates to what every
shooter is looking for; a more controllable pistol with less felt recoil, less
muzzle flip and faster, more accurate follow-up shots.
At the heart of the O.Z-9C is our patented Steel Receiver. This solid steel
frame runs the length of the entire pistol allowing the locking block to be
fully integrated. The extended rails in the steel receiver help provide more
than double the surface area of contact to the slide. Additional benefits
include channels that clear out debris while also acting as lubricating
reservoirs for high friction areas.
Having a singular component for the slide to travel along minimizes
vibration and recoil energy by dispersing it along the receiver through the
custom grip. A single take-down pin conveniently located at the front of the
trigger guard locks the removable grip to the steel receiver.
By design, the trigger is housed in the steel receiver allowing for future grip
upgrades without completely breaking down the pistol. Our improved grips
have steeper angles, and forward hand position keeping the muzzle down,
and pointing straighter.
Additional grip sizes and colors, and multiple sized magwells are available
to facilitate further customization by end-users. The O.Z-9C is compatible
with ZEV components and accepts GLOCK® mags.

The O.Z-9C Compact FDE includes the following:

• ZEV Exclusive O.Z-9C Compact Hyper-comp Slide......................... DLC
• ZEV Optimized Match Grade Ported Barrel..............................BRONZE
• ZEV PRO Flat Face Trigger................................................. BLACK/RED
• ZEV O.Z-9C Grip...........................................................................BLACK
• ZEV O.Z-9 PRO Magwell
• ZEV O.Z-9 Custom SKB Case
• Magpul PMAG® 15 GL9® ...............................................................Qty: 2

ZEV O.Z-9C Compact Specifications:

Caliber Trigger Pull Width Height Length (overall) Weight
9mm 4.5 lbs. 1.624” 5.022” 7.6125” 28 oz.

OPTIMIZED BARREL SIGHTS TRIGGER/SAFETY COLOR SKU

PORTED - BRZ BLACK BLACK/RED OZ9C-CPT-HYP-B-BRZ

• PORTED BARREL
• BARREL PINNED FRONT SIGHT

100%
MADE IN USA
100%
MADE IN USA
100%
MADE IN USA
Hyper-Comp name used by permission of High Performance Firearms LLC.
100%
MADE
2120 IN USA DRIVE • CENTRALIA, WA 98531
NORTHPARK ZEVTECH.COM
ZEV// O.Z-9C GRIP KIT COMPACT
Modify your O.Z-9 Compact with additional grip kits available in Flat Dark
Earth (FDE) and Gray. Easily customize the look of your O.Z-9 Compact
with a different colored grip. Simply remove the take-down pin, install the
new grip and reinstall the take-down pin.

ZEV O.Z-9 Grip Kit features:

• No need to remove the trigger
• Ready to install out of the box
• ZEV Gen4 Magazine Release installed
• Take-down pin included

MODEL COLOR SKU

COMPACT BLACK GRIP.KIT-OZ9C-CPT-B
COMPACT FLAT DARK EARTH (FDE) GRIP.KIT-OZ9C-CPT-FDE
COMPACT GRAY GRIP.KIT-OZ9C-CPT-GRY

NOTE: Compact O.Z-9 grips are not compatible nor

interchangeable with the Standard O.Z-9.

100%
MADE IN USA

100%
MADE IN USA
100%
OZ9 PRO
MADE INMagwell
USA (shown) sold separately

100%
MADE IN USA

2120 NORTHPARK STREET • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// O.Z-9C GRIP KIT X
The O.Z-9C X Grip was designed for those looking to run a full sized grip
on the Compact O.Z-9. Switch between competition and concealed carry
with the same firearm. Simply remove the take-down pin, swap grips,
and re-install the take-down pin. No need to remove the trigger, as it
remains installed in the O.Z-9 receiver. Trigger pins are housed by the grip
internally, not through the grip like other platforms.

ZEV O.Z-9 Shorty Grip Kit features:

• Ready to install out of the box
• ZEV Gen4 Magazine Release installed
• Take-down pin included

MODEL COLOR SKU

COMPACT BLACK GRIP.KIT-OZ9C-X-B
COMPACT FLAT DARK EARTH (FDE) GRIP.KIT-OZ9C-X-FDE
COMPACT GRAY GRIP.KIT-OZ9C-X-GRY

NOTE: O.Z-9C X Grips are NOT COMPATIBLE nor interchangeable

with the Standard O.Z-9 or MBK.
• O.Z-9C X Grip is compatible with G17 size magazines only
• O.Z-9C X Grip is compatible with all O.Z-9 magwells.

Achieve maximum versatility with O.Z-9C modularity

• One gun, two grip sizes, three available colors

O.Z-9C COMPACT RECEIVER

O.Z-9C COMPACT GRIP O.Z-9C X GRIP

O.Z-9C COMPACT SLIDE O.Z-9C COMPACT SLIDE

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK STREET • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// O.Z-9 MAGWELL PRO
The ZEV Technologies O.Z-9 PRO Magwell was designed for the
professional shooter that is looking to enhance the look and performance
of their O.Z-9 while maintaining a lower profile than the PRO-Plus magwell.
The one piece design facilitates easy installation and utilizes a single pin
to securely mount to the O.Z-9 grip. Designed to fit all models of the O.Z-9
grip.
The ZEV PRO Magwell was designed and tested for compatibility with
standard capacity factory magazines.
• One piece 6061 aluminum design
• Type III anodized finish
• Includes magwell pin

MODEL SKU
O.Z-9 MW.K-OZ9-PRO-B

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK STREET • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// O.Z-9 MAGWELL PRO PLUS
The ZEV Technologies O.Z-9 PRO Plus Magwell was designed for the
professional shooter that is looking to enhance the look and performance
of their O.Z-9. The one piece design facilitates easy installation and utilizes
a single pin to securely mount to the O.Z-9 grip. Designed to fit all models
of the O.Z-9 grip.
The ZEV O.Z-9 PRO Magwell was designed and tested for compatibility
with standard capacity factory magazines as well as magazines fitted with
ZEV basepad magazine extensions. It also incorporates a pass-through
hole at the back for lanyard retention.
• One piece 6061 aluminum design
• Type III anodized finish
• Includes magwell pin

MODEL SKU
O.Z-9 MW.K-OZ9-PRO-PLUS-B

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK STREET • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// O.Z-9C CONVERSION SLIDES
ZEV Technologies introduces a new level of modularity to the O.Z-9
Compact model with Conversion Slides. Just as the name implies,
you can now quickly and easily convert your Compact O.Z-9 for different
uses. Offered in two sizes, 19L and 19XL, the longer O.Z-9C Conversion
Slides bring increased accuracy and control to the compact platform.
Right out of the box, the O.Z-9C is configured for concealed carry.
Install a 19L slide along with the O.Z-9C X Grip, and now it's ready for a
range day, training class, or home defense. Install the 19XL with the O.Z-9C O.Z-9C 19L
X Grip, and it's ready for competition use.
Achieve a total of six unique grip and slide combinations with the O.Z-9C
utilizing the two new Conversion Slides and new O.Z-9C X Grip. Add the
O.Z-9 PRO Plus Magwell to the mix, and that number increases to twelve
possible combinations. This increased modularity of the O.Z-9C platform
provides the ability to configure one firearm to match any need without O.Z-9C 19L SLIDE & ZEV GEN5 G17 OPTIMIZED BARREL
having to purchase additional serialized components.
ZEV Conversion Slides are only compatible with OZ9C and Gen3 G19
frames. Due to the difference in locking lugs between compact and full
size frames, ZEV Conversion Slides require the use of ZEV Gen5 G17
or G34 Optimized Match Barrels. ZEV recommends the use of our 20lb.
compact recoil spring and guide rod with both the 19L and 19XL, however
the use of original G19/O.Z-9C guide rod and springs are acceptable.

ZEV Stripped Conversion Slides features:

O.Z-9C RECEIVER
• Machined from 17-4 Stainless steel billet
• Lowered ejection port to aid in ejection of brass
• Match grade, precision milled tolerances that are tighter than factory
• Improved accuracy and grouping performance upon installation O.Z-9C GRIP
• RMR adapter plate included

ZEV O.Z9C Conversion Slide Specifications:

Model Width Height Length Weight
O.Z-9C 19L 1.0” .84” 7.25” 10.1 oz.
0.Z-9C 19XL 1.0” .84” 8” 10.8 oz.

MODEL GEN SKU

O.Z-9C 19L 1-3 SLD-Z19L-3G-OZ9-RMR-DLC
O.Z-9C 19XL 1-3 SLD-Z19XL-3G-OZ9-RMR-DLC

NOTE:
• O.Z-9C specific parts (slide, barrel, grip) are NOT O.Z-9C 19XL
COMPATIBLE nor interchangeable with the O.Z-9.
• These slides will NOT work on Gen4 or Gen5 frames
• These slides will NOT work on G17, G34, or O.Z-9 frames
• These slides will NOT work with Gen3 or Gen4 G17 or G34
barrels O.Z-9C 19XL SLIDE & ZEV GEN5 G34 OPTIMIZED BARREL
• 19L requires the use of a ZEV Gen5 G17 Optimized Barrel
• 19XL requires the use of a ZEV Gen5 G34 Optimized Barrel

O.Z-9C RECEIVER

100%
MADE IN USA
O.Z-9C GRIP
100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// SLIDE CITADEL CONVERSION SLIDES
ZEV Technologies introduces a new level of modularity to the Gen3 G19
platform with Citadel Conversion Slides. Just as the name implies,
you can now quickly and easily convert your Gen3 G19 for different uses.
Offered in two sizes, 19L and 19XL, the longer Citadel Conversion Slides
bring increased accuracy and control to the compact platform.
The G19 is a great platform configured for concealed carry, but why stop
there? Install a 19L slide and now it's ready for a range day, training class,
or home defense. Install the 19XL and now it's ready for competition use. CITADEL 19L
The ZEV Conversion Slides provides the ability to configure one firearm
to match any need without having to purchase additional serialized frames.
ZEV Conversion Slides are only compatible with OZ9C and Gen3 G19
frames. Due to the difference in locking lugs between compact and full
size frames, ZEV Conversion Slides require the use of ZEV Gen5 G17
or G34 Optimized Match Barrels. ZEV recommends the use of our 20lb. CITADEL 19L SLIDE & ZEV GEN5 G17 OPTIMIZED BARREL
compact recoil spring and guide rod with both the 19L and 19XL, however
the use of original G19/O.Z-9C guide rod and springs are acceptable.

ZEV Stripped Conversion Slides features:

• Machined from 17-4 Stainless steel billet
• Lowered ejection port to aid in ejection of brass
• Match grade, precision milled tolerances that are tighter than factory
• Improved accuracy and grouping performance upon installation GEN3 G19 FRAME
• RMR adapter plate included

ZEV O.Z9C Conversion Slide Specifications:

Model Width Height Length Weight
Citadel 19L 1.0” .84” 7.25” 10.1 oz.
Citadel 19XL 1.0” .84” 8” 10.8 oz.

MODEL GEN SKU

CITADEL 19L 1-3 SLD-Z19L-3G-CIT-RMR-DLC
CITADEL 19XL 1-3 SLD-Z19XL-3G-CIT-RMR-DLC

NOTE:
• O.Z-9C specific parts (slide, barrel, grip) are NOT COMPATIBLE
nor interchangeable with the O.Z-9.
• These slides will NOT work on Gen4 or Gen5 frames
• These slides will NOT work on G17, G34, or O.Z-9 frames CITADEL 19XL
• These slides will NOT work with Gen3 or Gen4 G17 or
G34 barrels
• 19L requires the use of a ZEV Gen5 G17 Optimized Barrel
• 19XL requires the use of a ZEV Gen5 G34 Optimized Barrel
CITADEL 19XL SLIDE & ZEV GEN5 G34 OPTIMIZED BARREL

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// SLIDE CITADEL
The ZEV Citadel slide features front and rear angled side serrations for
a positive grip, as well as channels on the top of the slide to reduce glare.
No matter your slide grip location preference during manipulation, press
checks, or malfunction clearing drills, the angled serrations keep your hand
from slipping off the slide by naturally moving your hand downward and on
to the slide when pulling back, whether wearing gloves or not.
Our stainless steel slides are designed to improve accuracy and GEN 3
performance. They are manufactured in our state-of-the-art manufacturing
facility from a single billet of 17-4 stainless steel to tighter tolerances than
factory slides for increased consistency in barrel lockup which improves
accuracy.
All ZEV slides have our patented optic cut which features posts allowing
for more thread area keeping your optic securely mounted to your slide.
ZEV slides weigh less than factory slides, therefore reduce reciprocating
weight, which reduces fatigue and allows for faster shot follow-up
placement. GEN 4

ZEV Stripped Slides features:

• Machined from 17-4 Stainless steel billet
• Lowered ejection port to aid in ejection of brass
• Match grade, precision milled tolerances that are tighter than factory
• Improved accuracy and grouping performance upon installation
• DLC or PVD coatings offered have a Rockwell hardness rating above
that of factory coatings GEN 5

• RMR adapter plate included

ZEV Slide Specifications:

Slide Color: BLACK DIAMOND-LIKE CARBON (DLC)
Model Width Height Length Weight G19 Models Shown
G19 1.0” .84” 6.75” 10.66 oz.
G17 1.0” .84” 7.25” 10.83 oz.

MODEL GEN BLACK (DLC) TITANIUM GRAY (GRY)

19 1-3 SLD-Z19-3G-CIT-RMR-DLC SLD-Z19-3G-CIT-RMR-GRY
19 4 SLD-Z19-4G-CIT-RMR-DLC SLD-Z19-4G-CIT-RMR-GRY
19 5 SLD-Z19-5G-CIT-RMR-DLC SLD-Z19-5G-CIT-RMR-GRY

17 1-3 SLD-Z17-3G-CIT-RMR-DLC SLD-Z17-3G-CIT-RMR-GRY GEN 3

17 4 SLD-Z17-4G-CIT-RMR-DLC SLD-Z17-4G-CIT-RMR-GRY
17 5 SLD-Z17-5G-CIT-RMR-DLC SLD-Z17-5G-CIT-RMR-GRY

GEN 4

GEN 5

100%
MADE IN USA Slide Color: TITANIUM GRAY (GRY)
100%
G17 Models Shown
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// SLIDE DUTY
The Duty slides feature the same workmanship and quality that ZEV is G19
known for with a functionally driven design and utilitarian coating for the
no-nonsense shooter who is looking to complete a new frame build or to
enhance the functionality of their Glock. The black nitride finish provides a
durable coating and the patented ZEV RMR cut enables the use of red dot
sights using an RMR installation footprint. We've reduced the cost, but not
the quality.

GEN 3
ZEV Stripped Slides features:
• Machined from 17-4 Stainless steel billet
• Lowered ejection port to aid in ejection of brass
• Match grade, precision milled tolerances that are tighter than factory
• Improved accuracy and grouping performance upon installation
• Torx wrench and two sets of RMR screws (tall and short) included
GEN 5

G17

NOTE: ZEV RMR Cover Plate not included. Sold separately.

MODEL GEN BLACK GEN 3

19 1-3 SLD-Z19-3G-DUTY-RMR-BLK
19 5 SLD-Z19-5G-DUTY-RMR-BLK

17 1-3 SLD-Z17-3G-DUTY-RMR-BLK
17 5 SLD-Z17-5G-DUTY-RMR-BLK

ZEV Slide Specifications:

Model Width Height Length Weight GEN 5

G19 1.0” .84” 6.75” 10.6 oz.

G17 1.0” .84” 7.25” 10.8 oz.

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// PARTS SLIDE PARTS
ZEV makes everything you need to keep your ZEV or OEM slide operating
at peak level, we design, engineer, manufacture and test every part we
make in house.

ZEV ENHANCED EXTRACTOR

The ZEV Enhanced Extractor features enhanced geometry to increase
engagement on the case rim which improves reliability during operation of
the pistol. The ZEV Enhanced Extractor is machined from billet alloy steel
and DLC coated for durability.
• Compatible with ZEV OZ9 slides
SKU
• Compatible with Gen1-4 G19, G17, and G34 ZEV and OEM Glock slides. EXTR-9

ZEV STAINLESS STEEL GUIDE ROD

Our stainless steel replacement guide rod allows you to change spring
weights to tune your pistol to a particular load. The guide rod is designed
with a replaceable screw-head that can be changed, if necessary, to extend
the life of the part. The guide rod can also be run captured or uncaptured. FRAME SKU
STANDARD G.ROD-STD-SS
• Recommended usage of either an ISMI recoil spring in a corresponding
correct weight for your pistol. In most cases 11-17 lbs. GEN 1-3 Fits models: G17, G17C, G17L, G22, G22C, G24, G24C, G31, G31C, G34, G35, G37
GEN 4 Fits models: G17, G22, G31, G34, G35, G37
• NOT compatible with GLOCK factory guide rod springs
• Gen-4 compatible with the use of guide rod reducing ring

FRAME SKU
COMPACT G.ROD-CPT-SS
GEN 1-3 Fits models: G19, G19C, G23, G23C, G32, G32C, G38
GEN 4 Fits models: G19, G23, G32
GEN 5 Fits models: G19 with use of a reducing ring

ZEV GUIDE ROD REDUCING RING – GEN-4, GEN-5

COLOR SKU
Retrofit your GLOCK Gen 4-5 to use a single guide-rod and spring
assembly. SILVER RDC-4G-SS
BLACK RDC-4G-SS-DLC
• Compatible with both OEM Glock slides and ZEV slides
• For use on Gen 4 and Gen 5 models

ZEV FIRING PIN SAFETY

The firing pin safety prevents the striker from being able to impact the
primer of a chambered round without the trigger being pulled, which
means that when you are ready to shoot your pistol the trigger needs to
depress the firing pin safety first before it can be discharged. ZEV’s firing
pin safety features polished engagement surfaces and includes a reduced SIZE SKU
power spring which contribute to a cleaner, lighter trigger pull. Machined SMALL FPS-SS-SM
from stainless steel and available in both small and large sizes for
LARGE FPS-SS-LG
compatibility with most Glock models.

ZEV SKELETONIZED STRIKER

A reduced power striker spring contributes to a lighter trigger pull, but
when used in conjunction with a standard Glock striker it can occasionally
result in light primer strikes. ZEV’s skeletonized striker is lighter than a
standard Glock striker and features an extended firing pin to reduce the
likelihood of light primer strikes without sacrificing the lighter trigger pull. SKU
ZEV strikers are precision machined from stainless steel and then all
STK-SM
engagement surfaces are polished to ensure a smooth, clean trigger pull.

ZEV BACKPLATE
100%
MADE IN
Update theUSA
aesthetics of your slide with this honeycomb textured SKU
backplate.
100%
Fits all standard sized GLOCK and ZEV slides. Constructed of
MADE IN black
USA aluminum. BK.PLATE-AL
anodized
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// SIGHTS SIGHTS AND ACCESSORIES
The single most important upgrade you can make to your GLOCK pistol is
replacing your factory sights, ZEV Technologies sight sets are machined
from quality steel and coated to protect the finish. Sights are available
in different heights. Whether you are looking to increase accuracy or co-
witness your red dot optics, ZEV has you covered.

ZEV FRONT SIGHTS

ZEV front sights are designed to be used with one of the many rear sights
available for GLOCK factory replacement and are an excellent and cost-
effective upgrade. Best suited for ZEV combat rear, the ZEV front sight
gives you everything you need to upgrade your sight picture to shoot like
the pros and comes in either Black or Fiber Optic.
• A clean serrated post for a glare free sight picture
• Improved accuracy due to ease of target transition and acquisition HEIGHT MODEL SKU

• CNC-machined stainless steel construction .215 FIBER SIGHT.K-FR-215-FO

.215 BLACK SIGHT.K-FR-215-B
• Black DLC coated for hardness and resistance to wear FIBER BLACK

ZEV COMBAT REAR SIGHT

An excellent and cost-effective upgrade to any GLOCK®. Best suited to
work in tandem with one of our ZEV front sights, the ZEV Combat Rear
Sight gives shooters everything they need to upgrade sight picture and to
shoot like the pros.
• A clean serrated face for a glare free sight picture
• Notch width of .140 & Notch Dept of .145 will allow you enough room
to keep your eyes on target during transitions
• CNC-machined stainless steel construction SKU
SIGHT.K-RR-COM3-B
• Black DLC coated for hardness and resistance to wear

ZEV CO-WITNESS SIGHT SET

ZEV backup iron sights (BUIS) are designed to be used with one of the
many mini red dot sights available on the market - such as Trijicon’s RMR.
• Iron sight sets have the highest resolution and greatest ease
of acquisition
HEIGHT SKU
• Notch width of .140 & Notch Dept of .145 will allow you enough room
.300 SIGHT.SET-300-CW-B-CW-B
to keep your eyes on target during transitions

ZEV RMR ADAPTER PLATE

The Zev Technologies Red Dot Sight Adapter Plate for the Trijicon RMR is
machined from aluminum to match the specific red dot sight cut.
• Black anodized
• Easy to install
• Seats directly over the positioning posts machined into slide
• Allows for easy removal and replacement for any Trijicon RMR SKU
that is removed periodically for usage
ADAP-RMR-B
NOTE: Compatible with ZEV cut slide ONLY.

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// SIGHTS COMBAT NIGHT SIGHTS
ZEV Combat Night Sights give shooters a durable high visibility iron sight ZEV COMBAT NIGHT SIGHT SET
option that works in all lighting conditions. Designed to be identical in • .215 Tritium Front with Orange Ring
form and function to our current fiber optic combat sight set but with the • Tritium Rear
addition of tritium vials for low light illumination.
The front sight has a narrow bright orange ring surrounding the tritium dot
for daytime use. The rear sight has two tritium dots, has an angled edge to
aid in one handed operation of the slide, and does not overhang the RMR
optic cut.
Due to the low mounting of an RMR with our patented optic cut, it still SKU
provides a lower 1/3 co-witness with an RMR mounted. Assembled in the
SIGHT.SET-215-NS-COM3-NS-B
USA with Swiss tritium for maximum brightness.

Offered in the following configurations

• ZEV Combat Night Sight Set
.215 Tritium Front with Orange Ring
Tritium Rear
• ZEV Combat Night Sight Set
.215 Tritium Front with Orange Ring
Standard Rear ZEV COMBAT NIGHT SIGHT SET
• .215 Tritium Front with Orange Ring
• ZEV .215 Tritium Front Night Sight with Orange Ring
• Standard Rear
• ZEV Combat Rear Night Sight with Tritium

NOTE: 12 year warranty coverage and service life of the tritium

SKU
SIGHT.SET-215-NS-COM3-B

ZEV TRITIUM FRONT NIGHT SIGHT

• .215 Tritium Front with Orange Ring

SKU
SIGHT.K-FR-215-NS

ZEV TRITIUM COMBAT REAR NIGHT SIGHT

• Tritium Rear

SKU
SIGHT.K-RR-COM3-NS-B

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// BARRELS OPTIMIZED MATCH GRADE BARRELS
ZEV Technologies Optimized Match Barrels have been redesigned for 19 17 34 17 34
improved performance and Gen5 compatibility. Enhanced features STANDARD & THREADED STANDARD & THREADED STANDARD STANDARD & THREADED STANDARD
include a recessed target crown, a new match chamber, and a GEN 1–5 GEN 1–4 GEN 1–4 GEN 5 GEN 5
stylized barrel hood with caliber and model engravings and a loaded
chamber indicator.
ZEV’s proprietary broach cut 1 in 14” left hand twist rifling was
developed to create the most accurate Glock aftermarket barrel
available, and testing confirms a significant increase in accuracy
over factory barrels in all standard bullet weights.
Manufactured from 416R stainless steel which is an ideal material
for making match grade barrels because the material allows for
the precise cutting of chambers and rifling which results in a more
accurate barrel.
Available in Black DLC and Bronze.
G19 and G17 models are available either 1/2x28 threaded
or non-threaded.
G34 models are non-threaded only.

ZEV BARREL COMPATIBILITY

BARREL GLOCK MODEL GEN 1– 4 GEN 5
19 G19, G19X, G45 √ √
17 G17 √ –
17 G5 G17 – √
34 G34 √ –
CALIBER AND MODEL ENGRAVINGS LOADED CHAMBER INDICATOR STYLIZED THREAD PROTECTOR
34 G5 G34 – √

STANDARD BARREL
MODEL GEN BRONZE DLC
19 1–5 BBL-19-OPT-BRZ BBL-19-OPT-DLC
17 1–4 BBL-17-OPT-BRZ BBL-17-OPT-DLC
17 5 BBL-17-OPT-5G-BRZ BBL-17-OPT-5G-DLC
34 1–4 BBL-34-OPT-BRZ BBL-34-OPT-DLC
19 17 34 17 34
34 5 BBL-34-OPT-5G-BRZ BBL-34-OPT-5G-DLC
STANDARD & THREADED STANDARD & THREADED STANDARD STANDARD & THREADED STANDARD
GEN 1–5 GEN 1–4 GEN 1–4 GEN 5 GEN 5

THREADED BARREL
MODEL GEN BRONZE DLC
19 1–5 BBL-19-OPT-TH-BRZ BBL-19-OPT-TH-DLC
17 1–4 BBL-17-OPT-TH-BRZ BBL-17-OPT-TH-DLC
17 5 BBL-17-OPT-5G-TH-BRZ BBL-17-OPT-5G-TH-DLC

100% CALIBER AND MODEL ENGRAVINGS LOADED CHAMBER INDICATOR STYLIZED THREAD PROTECTOR
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// BARRELS PRO BARRELS
ZEV Technologies PRO Barrels offer a smooth exterior and a streamlined G17 Shown Color: BRONZE G19 Shown Color: BRONZE
hood design that incorporates the ZEV logo slashes and caliber marking. Model: Threaded & Standard Model: Threaded & Standard
The PRO barrel line features extremely tight tolerances and are
manufactured with pre-hardened chromium stainless steel (416R) that
was originally designed for use in Match Grade rifle barrels. This material
provides high tensile strength and toughness to withstand typical chamber
pressures while still being highly corrosion resistant.
ZEV PRO barrel bores are some of the most precise in the industry.
Every barrel is double honed (rough and finish) until a minimum surface
finish of 16 RA is reached. During this process the barrels are held to a
final dimension of +/- 0.003" for consistency and accuracy.
The barrels are cut rifled and 100% inspected for groove dimensions and
broach finish. Available standard and threaded with ½ x 28 suppressor
threading.
NOTE: Model specific.
ZEV Barrel specs:
• 416R Rifle Barrel Quality Stainless Steel
• Match grade drop in barrel
• Final dimension of +/- 0.003˝ for consistency and accuracy
• SAAMI spec. Match chambers
• Rifled with a 1 in 10˝ twist rate

ZEV Barrel Compatibility:

Standard Barrel Gen
G19 1-5
G17 1-4
Threaded Barrel Gen
G19 1-5
G17 1-4

STANDARD BARREL
MODEL GEN BRONZE DLC
19 1-5 BBL-19-PRO-BRZ BBL-19-PRO-DLC G17 Shown Color: DLC G19 Shown Color: DLC
Model: Threaded & Standard Model: Threaded & Standard
17 1-4 BBL-17-PRO-BRZ BBL-17-PRO-DLC

THREADED BARREL
MODEL GEN BRONZE DLC
19 1-5 BBL-19-PRO-TH-BRZ BBL-19-PRO-TH-DLC
17 1-4 BBL-17-PRO-TH-BRZ BBL-17-PRO-TH-DLC

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// COMPENSATOR V2 PRO
The ZEV V2 PRO Compensator was designed to enhance the performance
of your Glock pistol by reducing muzzle rise and felt recoil. The V2
improves upon the original PRO Compensator with contoured porting, an
enlarged guide rod channel, and a new mounting system which permits
secure installation and removal without the need for thread locking
compound.
The ZEV V2 PRO Compensator was developed and optimized for use
on the G19 but will fit and function on all 9mm Glock models with a
corresponding threaded barrel. Due to its compact size, when installed on
a G19 with ZEV threaded barrel, it has the same overall length as a G34
slide and is compatible with most G34 holsters.
The V2 PRO Compensator will generally function with standard power
9mm ammunition and factory recoil assemblies but best performance will
be obtained through matching the recoil spring weight to your particular
pistol and ammunition.

ZEV V2 Compensator features:

• Contoured porting
• Enlarged guide rod channel
• Improved mounting system

Thread Specifications:
MODEL THREAD PITCH
V2 PRO 1/2x28 threading
Left Handed 13.5x1 LH threading

V2 PRO COMPENSATOR
MODEL SKU
V2 PRO COMP-PRO-V2-B
LEFT HANDED COMP-PRO-V2-LH-B

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// TRIGGER PRO FLAT FACE
ZEV created the market for GLOCK trigger upgrades. Over the years, our
triggers have won more world championships and are in the hands of more
professionals than all other after-market triggers, combined.
We didn’t stop there, beginning two years ago we set out to reinvent our
entire product line. After thousands of hours of design and engineering
and after hundreds of thousands of rounds of testing, we are proud to
announce a product line built from the ground up to perform better and
more reliably than anything else on the market.
At the core of our PRO Flat Face trigger is ZEV’s new proprietary trigger bar
and professional connector. These products deliver the crispest, cleanest
trigger pull available. Finally, our new trigger pad features a revolutionary
riveted assembly process that makes it the longest lasting and most
reliable replacement trigger on the market.
• Drop-in installation
• Available for most GLOCK models
• Mil-Spec hard-anodized aluminum construction
• All ZEV triggers include our NEW PRO connector Gen 1-4 Trigger Bar with ZEV PRO Connector Shown
Black Trigger Pad / Red Safety

Drop-In Kit

Drop In Kit includes:

• Ejector Housing (caliber specific)
Gen 3 ............................................................................................ EH-3G
Gen 4 ............................................................................................ EH-4G
• ZEV PRO Connector................................................................. CONN-PRO Gen 5 Trigger Bar with ZEV PRO Connector Shown
Black Trigger Pad / Black Safety
• ZEV Trigger Spring.......................................................................SPR-TRG
• ZEV PRO Striker Spring........................................................SPR-STK-PRO
• ZEV Stainless Steel Firing Pin Safety.............................................FPS-SS
• ZEV Firing Pin Safety Spring........................................................ SPR-FPS
TRIGGER BAR
CALIBER GEN TRIGGER/SAFETY COLOR SKU
Ultimate Kit 9mm /.40, .357/.45 GAP 1-4 BLACK / BLACK FFT-PRO-BAR-SM-B-B
1-4 BLACK / RED FFT-PRO-BAR-SM-B-R
9mm 5 BLACK / BLACK FFT-PRO-BAR-5G-B-B
5 BLACK / RED FFT-PRO-BAR-5G-B-R

TRIGGER KITS
CALIBER GEN TRIGGER/SAFETY COLOR DROP-IN KIT SKU ULTIMATE KIT SKU
9mm 1-3 BLACK / BLACK FFT-PRO-DRP-3G9-B-B FFT-PRO-ULT-3G9-B-B
1-3 BLACK / RED FFT-PRO-DRP-3G9-B-R FFT-PRO-ULT-3G9-B-R
Fits: G17C, G17L, G19, G19C, G26, G34
4 BLACK / BLACK FFT-PRO-DRP-4G9-B-B FFT-PRO-ULT-4G9-B-B
4 BLACK / RED FFT-PRO-DRP-4G9-B-R FFT-PRO-ULT-4G9-B-B
Fits: G17, G19, G26, G34
Ultimate
100% Kit includes the Drop In Kit plus the following:
.40 1-3 BLACK / BLACK FFT-PRO-DRP-3G40-B-B FFT-PRO-ULT-3G40-B-B
MADE IN USA
• ZEV Stainless Steel Skeletonized Striker...................................... STK-SM 1-3 BLACK / RED FFT-PRO-DRP-3G40-B-R FFT-PRO-ULT-3G40-B-R
100%
MADE IN USA
Fits: G22, G22C, G23, G23C, G24, G24C, G27, G35
100%
MADE IN USA 4 BLACK / BLACK FFT-PRO-DRP-4G40-B-B FFT-PRO-ULT-4G40-B-B

100%
4 BLACK / RED FFT-PRO-DRP-4G40-B-R FFT-PRO-ULT-4G40-B-R
MADE IN USA
Fits: G22, G23, G27, G35

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// TRIGGER PRO CURVED FACE
ZEV created the market for GLOCK trigger upgrades. Over the years, our
triggers have won more world championships and are in the hands of more
professionals than all other after-market triggers, combined.
We didn’t stop there, beginning two years ago we set out to reinvent our
entire product line. After thousands of hours of design and engineering
and after hundreds of thousands of rounds of testing, we are proud to
announce a product line built from the ground up to perform better and
more reliably than anything else on the market.
At the core of our PRO Curved Face trigger is ZEV’s new proprietary trigger
bar and professional connector. These products deliver the crispest,
cleanest trigger pull available. Finally, our new trigger pad features a
revolutionary riveted assembly process that makes it the longest lasting
and most reliable replacement trigger on the market.
• Drop-in installation
• Ergonomically correct trigger pad
• Available for most GLOCK models
• Mil-Spec hard-anodized aluminum construction
• All ZEV triggers include our NEW PRO connector

Drop-In Kit

TRIGGER BAR
CALIBER GEN TRIGGER/SAFETY COLOR SKU
9mm /.40, .357/.45 GAP 1-4 BLACK / BLACK CFT-PRO-BAR-SM-B-B
1-4 BLACK / RED CFT-PRO-BAR-SM-B-R
1-4 BLACK / RED CFT-PRO-BAR-43-B-R
9mm 5 BLACK / BLACK CFT-PRO-BAR-5G-B-B
5 BLACK / RED CFT-PRO-BAR-5G-B-R
Drop In Kit includes: 10 mm 1-4 BLACK / BLACK CFT-PRO-BAR-LG-B-B
• Ejector Housing (caliber specific) 1-4 BLACK / RED CFT-PRO-BAR-LG-B-R
Gen 3 ............................................................................................ EH-3G
Gen 4 ............................................................................................ EH-4G
TRIGGER KITS
• ZEV PRO Connector................................................................. CONN-PRO CALIBER GEN TRIGGER/SAFETY COLOR DROP-IN KIT SKU ULTIMATE KIT SKU

• ZEV Trigger Spring.......................................................................SPR-TRG 9mm 1-3 BLACK / BLACK CFT-PRO-DRP-3G9-B-B CFT-PRO-ULT-3G9-B-B

1-3 BLACK / RED CFT-PRO-DRP-3G9-B-R CFT-PRO-ULT-3G9-B-R
• ZEV PRO Striker Spring........................................................SPR-STK-PRO
Fits: G17C, G17L, G19, G19C, G26, G34
• ZEV Stainless Steel Firing Pin Safety.............................................FPS-SS
4 BLACK / BLACK CFT-PRO-DRP-4G9-B-B CFT-PRO-ULT-4G9-B-B
• ZEV Firing Pin Safety Spring........................................................ SPR-FPS
4 BLACK / RED CFT-PRO-DRP-4G9-B-B CFT-PRO-ULT-4G9-B-B
Fits: G17, G19, G26, G34

Ultimate Kit .40 1-3 BLACK / BLACK CFT-PRO-DRP-3G40-B-B CFT-PRO-ULT-3G40-B-B

1-3 BLACK / RED CFT-PRO-DRP-3G40-B-R CFT-PRO-ULT-3G40-B-R
Fits: G22, G22C, G23, G23C, G24, G24C, G27, G35
4 BLACK / BLACK CFT-PRO-DRP-4G40-B-B CFT-PRO-ULT-4G40-B-B
4 BLACK / RED CFT-PRO-DRP-4G40-B-R CFT-PRO-ULT-4G40-B-R
Fits: G22, G23, G27, G35
.45 SF 1-3 BLACK / BLACK CFT-PRO-DRP-45SF-B-B CFT-PRO-ULT-45SF-B-B
1-3 BLACK / RED CFT-PRO-DRP-45SF-B-R CFT-PRO-ULT-45SF-B-B
Fits: Gen 1-3: G21S, G30S / Gen-4: G21, G30, G41
.45 1-3 BLACK / BLACK CFT-PRO-DRP-3G45-B-B CFT-PRO-ULT-3G45-B-B
1-3 BLACK / RED CFT-PRO-DRP-3G45-B-R CFT-PRO-ULT-3G45-B-R
Fits: G21, G21C, G30
100%
MADE IN USA 10mm SF 1-4 BLACK / BLACK CFT-PRO-DRP-10SF-B-B CFT-PRO-ULT-10SF-B-B
Ultimate
100%
Kit includes the Drop In Kit plus the following: 1-4 BLACK / RED CFT-PRO-DRP-10SF-B-R CFT-PRO-ULT-10SF-B-R
MADE IN USA
• ZEV Stainless Steel Skeletonized Striker...................................... STK-SM Fits: Gen 1-3: G20S, G29S / Gen-4: G20, G29, G40
100%
MADE IN USA 10mm 1-3 BLACK / BLACK CFT-PRO-DRP-3G10-B-B CFT-PRO-ULT-3G10-B-B

100%
1-3 BLACK / RED CFT-PRO-DRP-3G10-B-R CFT-PRO-ULT-3G10-B-R
MADE IN USA
Fits: G20, G20C, G29

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// TRIGGER FULCRUM ADJUSTABLE
The ZEV Technologies Adjustable Fulcrum Drop-In Trigger Kit is the single
most important upgrade a user can make to their Glock pistol. Our triggers
feature a wider trigger pad and safety for better user engagement and will
help build proper muscle memory for improved consistency and accuracy.
The trigger weight can be adjusted to as low as 3 lbs, while a noticeably
crisp reset improves the ability to ride the reset for better follow up shot
speed and placement.
Pre-travel and over-travel are adjustable to allow for a shorter pull, crisper
break and faster reset. The ZEV Trigger Bar is the ONLY proprietary GLOCK
replacement trigger bar that reduces travel, and provides professional,
crisp trigger pull while keeping all factory Glock safeties intact.

NOTE:
ZEV Technologies recommends this for competition use ONLY.
The ZEV trigger bar is in our small frame trigger kits only (9mm/.40)

Ultimate Kit includes:

• Ejector Housing (caliber specific)
Gen 3 . .............................................................................................EH-3G
Gen 4 . .............................................................................................EH-4G
• ZEV Pro Connector..................................................................CONN-PRO
• ZEV Trigger Spring......................................................................SPR-TRG
• ZEV Stainless Steel Skeletonized Striker......................................STK-SM
• ZEV 2lb Striker Spring.......................................................... SPR-STK-2LB
ZEV 3lb Striker Spring.......................................................... SPR-STK-3LB
• ZEV Stainless Steel Firing Pin Safety............................................FPS-SS
• ZEV Firing Pin Safety Spring........................................................SPR-FPS
• 2 Adjustment Wrenches Pre-Travel Adjustment

• All ZEV triggers include our NEW PRO connector

CALIBER GEN TRIGGER/SAFETY COLOR SKU

9mm 1-3 BLACK / BLACK FUL-ADJ-ULT-9-B-B
1-3 BLACK / RED FUL-ADJ-ULT-9-B-R
Fits: G17C, G17L, G19, G19C, G26, G34
4 BLACK / BLACK FUL-ADJ-ULT-4G9-B-B
4 BLACK / RED FUL-ADJ-ULT-4G9-B-R
Fits: G17, G19, G26, G34
.40 1-3 BLACK / BLACK FUL-ADJ-ULT-40-B-B
1-3 BLACK / RED FUL-ADJ-ULT-40-B-R
Fits: G22, G22C, G23, G23C, G24, G24C, G27, G35
4 BLACK / BLACK FUL-ADJ-ULT-4G40-B-B
4 BLACK / RED FUL-ADJ-ULT-4G40-B-R
Fits: G22, G23, G27, G35

Over-Travel Adjustment

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// TRIGGER TRIGGER PARTS
ZEV PRO CONNECTOR
The ONLY proprietary GLOCK replacement trigger bar that reduces travel,
and provides professional, crisp trigger pull while keeping all factory Glock
safeties intact. With two years of development and tens of thousands of
rounds of testing, the all-new ZEV PRO connector is engineered to provide
users with a consistent, positive reset and a reduction in trigger pull weight
without sacrificing the reliability or safety of your pistol.
Whether used in conjunction with a ZEV trigger or with your stock
Glock trigger, the PRO connector will provide a noticeable increase in
performance and is ready to drop-in and use straight from ZEV, no fitting
or polishing required.
• Improved geometry for lightened trigger pull with crisp, positive reset
• New proprietary material for improved spring tension
• Use in conjunction with ZEV competition spring kit for best results
• Compatible with all Glock models except G42 and G43

SKU
CONN-PRO

ZEV COMPETITION SPRING KIT

The ZEV Technologies Competition Spring Kit contains a heavy trigger
spring (heavier is better, as it assists with trigger pull), A reduced power
firing pin spring, and a reduced power firing pin safety spring.
The result is the lighter and smoother trigger pull for your GLOCK. When
used in conjunction with the ZEV Technologies PRO Connector, the trigger
pull weight is reduced down to a smooth 3 lbs total.
• Improved geometry for lightened trigger pull with crisp, positive reset
• New proprietary material for improved spring tension
• Use in conjunction with ZEV competition spring kit for best results
• Compatible with all Glock models except G42 and G43

SKU
SPR-KIT

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// MAGWELL PRO
The ZEV Technologies PRO Magwell was designed for the professional
shooter that is looking to enhance the look and performance of their Glock.
The one piece design facilitates easy installation and utilizes a single
attachment screw to securely mount to the Glock frame while retaining a
low profile. Designed to fit both Gen-1-4 and Gen-5 GLOCK frames
The ZEV PRO Magwell was designed and tested for compatibility with
standard capacity factory magazines.
• One piece 6061 aluminum design
• Type III anodized finish
• Kit includes magwell body, mounting screw, and wrench..
NOTE:
• Back straps may need to be modified if used.
• 10 Round magazines WILL NOT work with this model of magwell. If
10 round capacity magazines are primarily used, this product is not
recommended.

Shown: Gen5 PRO Model Installed

GEN 1 - 4 PRO MAGWELL

MODEL SKU
STANDARD MW.K-STD-PRO-AL-B
GEN 1-3 Fits: G17C, G17L, G22, G22C, G24, G24C, G31, G31C, G34, G35, G37
GEN 4 Fits: G17, G22, G31, G34, G35, G37
COMPACT MW.K-CPT-PRO-AL-B
GEN 1-3 Fits: G19, G19C, G23, G23C, G32, G32C, G38
GEN 4 Fits: G19, G23, G32

GEN 5 PRO MAGWELL

MODEL SKU
GEN 5 MW.K-CPT-PRO-5G
Fits: Gen5 G19 only. Not for use on G26, G19X, G17 & G34 models.

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// MAGWELL PRO PLUS
The ZEV Technologies PRO Plus Magwell was designed for the
professional shooter that is looking to enhance the look and performance
of their Glock. The one piece design facilitates easy installation and utilizes
a single attachment screw to securely mount to the Glock frame while
retaining a low profile. Designed to fit both Gen-1-4 and Gen-5 GLOCK
frames
The ZEV PRO Plus Magwell was designed and tested for compatibility with
standard capacity factory magazines as well as magazines fitted with ZEV
basepad magazine extensions. It also incorporates a pass-through hole at
the back for lanyard retention.
• One piece 6061 aluminum design
• Type III anodized finish
• Kit includes magwell body, mounting screw, and wrench..
NOTE:
• Back straps may need to be modified if used.
• 10 Round magazines WILL NOT work with this model of magwell.
If 10 round capacity magazines are primarily used, this product is not
recommended.

Shown: Gen5 PRO Plus Model Installed

GEN 1 - 4 PRO PLUS MAGWELL

MODEL SKU
STANDARD MW.K-STD-PRO-PLUS
GEN 1-3 Fits: G17C, G17L, G22, G22C, G24, G24C, G31, G31C, G34, G35, G37
GEN 4 Fits: G17, G22, G31, G34, G35, G37

GEN 5 PRO PLUS MAGWELL

MODEL SKU
GEN 5 MW.K-STD-PRO-PLUS-5G
Fits: Gen5 G17 & G34 models.

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// BASEPAD GLOCK MAGAZINE
ZEV Technologies designed a basepad to not only give extra round
capacity but also aid in the cleaning process or your mag extension.
Basepads have been the same for many years and the feedback we have
received from users and competition shooters was that they were tired of
trying to clean magazines once basepads were installed. ZEV basepads
feature a removable floor plate to aid in the cleaning of your magazine.
If your magazine ends up in the dirt simply remove the floor plate, spring
and clean.
Featuring a customized baseplate and integrated sliding lock mechanism,
this magazine basepad extension allows the user to disassemble and
reassemble the magazine for cleaning without the use of tools.
• Adds +5 capacity on 9mm
• Adds +4 capacity on .40 cal
• Fits standard capacity GLOCK 9mm & .40 magazines
• 3-piece design is easy to reassemble without damaging the mag body
• Additional power spring provided
• Available in Red and Black anodized aluminum
NOTE:
GLOCK magazine not included.
Not compatible with restricted capacity GLOCK magazines.
COMPATIBILITY:
Gen 1-3 Fits: G17C, G17L, G22, G22C, G24, G24C, G31, G31C, G34, G35
Gen 4 Fits: G17, G22, G31, G34, G35

GLOCK MAGAZINE BASEPAD

COLOR SKU
RED BPAD-EXT-GLK-5-R
BLACK BPAD-EXT-GLK-5-B

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// PARTS FRAME PARTS
ZEV has a full catalog of internals to upgrade your frame. ZEV products
increase the ease of use with our extended slide lock, a factory extended
slide release and extended magazine release. We also have extra or spare
frame pins which are a great addition to your range bag or tool kit. It never
hurts to have an extras.

ZEV EXTENDED MAGAZINE RELEASE (GEN-3)

An all aluminum extended mag release upgrade from the plastic factory
version. Features a textured oversized head, allowing shooters to access it
without shifting grip.
• Aluminum mag release body and button are more durable than factory
plastic mag release
• Mil-Spec hard-anodized, aircraft-grade billet aluminum
• Allen wrench included

SIZE BUTTON COLOR SKU

LARGE SILVER MR-LG-3G-S
BLACK MR-LG-3G-B
Fits models: G20, G21, G29, G30
SMALL SILVER MR-SM-3G-S
BLACK MR-SM-3G-B
Fits models: G17, G19, G34, G22, G23, G35

ZEV EXTENDED MAGAZINE RELEASE (GEN-4, GEN-5)

Designed with an aggressive rearward angle and a non-slip textured face
that matches the factory finish of your Gen-4 and Gen-5 grip.
• Drop-in replacement part.

SIZE SKU
LARGE MR-LG-4G
Fits models: G20, G21, G29, G30, G40, G41
SMALL MR-SM-4G
Fits models: G17, G19, G34, G22, G23, G35

ZEV TITANIUM PIN KIT

Precision-machined titanium pins are stronger and fit your GLOCK frame
better than factory pins.
• Kit includes one each of the following: Trigger Pin, Locking Block Pin,
Ejector housing pin
• Gen-4 kit comes with an additional Ejector housing pin, longer for usage
of backstrap (shown),

MODEL SKU
GEN 1-3 PIN-KIT-3G
GEN 4 PIN-KIT-4G
100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

RIFLE PRODUCTS
ZEV// BILLET RIFLE – SMALL FRAME 6.5 CREEDMOOR – 20"
Designed with the firepower of a large frame caliber in an AR15 sized
package, the ZEV Small Frame delivers long range capability at a fraction
of the size of its larger counterpart. Chambered in the popular 6.5
Creedmoor, with ballistic advantages over the .308 when shooting longer
distances, this rifle is a perfect choice for both hunting and PSR style
shooting when reaching out farther matters to you.
ZEV conducted extensive testing to refine the operating system and to
ensure absolute reliability and longevity without sacrificing the look and
feel of a high quality custom rifle. The 6.5 Creedmoor ZEV Small Frame
combines these benefits with a custom sub-MOA match grade heavy barrel
to create a precision rifle that is second to none.
All ZEV Billet Rifles are born of innovative design, the highest quality
materials, state-of-the-art manufacturing processes, and rigid standards
for impeccable quality and finish work. Using best-in-class components
each rifle is assembled and tested in-house by our expert gunsmiths
resulting in a light weight, versatile, and high performance firearm.
Designed and manufactured in the USA.
Features:
• ZEV Billet Upper and Lower receivers are machined from 7075-T651
aluminum and finished in type III class 2 hard coat anodize
• ZEV extended length M-LOK free floating hand guard installs directly to
the integrated rail base on the upper receiver which enhances rigidity
while giving the rifle a unique and streamlined profile
• ZEV Slide Lock charging handle permits ambidextrous manipulation with
an extended and textured latch for superior grip and ergonomics
• ZEV exclusive sniper gray flat face AR Gold trigger from ATC features a
2.5lb pull with a short reset and clean break
• Custom 20" 6.5 Creedmoor fluted 416R stainless steel sub-MOA match
grade heavy barrel manufactured for ZEV by Noveske Rifleworks
• Custom tuned gas and buffer system for smooth cycling, consistent
ejection, and low recoil
• Muzzle brake from SureFire for additional recoil reduction to keep the
rifle on target through recoil and aid in making follow up shots
• Ambidextrous operating controls and Magpul furniture further enhance
the user experience. Includes one 20 round PMAG
• Overall length of 38.75" with stock collapsed. Unloaded weight of 8.7 lbs

In comparison, the ZEV Small Frame has more parts compatible with an
AR15 than that of a large frame rifle.
Receiver Receiver Receiver
Rifle Length Height Width Weight
AR15 7.625” 3.25” 1.5” 8 lbs.
EV SMALL FRAME
Z 8.375” .3.25” 1.55” 8.7 lbs.
LARGE FRAME 8.938" 3.5" 1.625" 9 lbs.

BILLET SF 6.5 CREEDMOOR – 20"

SKU
RIFLE-SF-6.5-20-B

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// BILLET RIFLE .223 WYLDE – CF16"
ZEV Billet Rifles are born of innovative design, the highest quality
materials, state-of-the-art manufacturing processes, and rigid standards
for impeccable quality and finish work. Using best-in-class components
each rifle is assembled and tested in-house by our expert gunsmiths
resulting in a light weight, versatile, and high performance firearm.
Designed and manufactured in the USA.

Features:
• ZEV Billet Upper and Lower receivers are precision-machined from
7075-T651 aluminum for strength and light weight, complete with
an integral trigger guard, flared magwell, and finished in true black type III
class 2 hard coat anodize.
• ZEV Wedge Lock hand guard provides a full length continuous top rail
with M-LOK mounting system for maximum user customization and
control, integrated anti-rotation pin ensures a consistent and continuous
top-rail with the upper receiver.
• ZEV Slide Lock charging handle permits ambidextrous manipulation with
an extended and textured latch for superior grip and ergonomics.
• Proof Research match grade 16” carbon fiber barrel chambered in
.223 Wylde with a 1:8 twist and mid-length gas system. Capable of
consistent sub-MOA accuracy with high quality factory ammunition.
• ZEV exclusive sniper grey flat face AR Gold trigger from ATC features a
2.5lb pull with a short reset and clean break that is second to none.
• Ambidextrous operating controls for the safety selector, bolt release, and
magazine release.
• Low profile fixed gas block.
• SureFire WARCOMP closed tine flash hider to aid in recoil management
and muzzle flash reduction. Serves as a mounting adapter for all SureFire
SOCOM fast attach suppressors.
• H3 carbine buffer increases dwell time and reduces port-pressure to
ensure reliable extraction and a smooth recoil impulse.
• Mil-spec carbine buffer tube provides six buttstock adjustment positions
for user customization and comfort.
• Mil-spec staked castle nut with Magpul ASAP QD endplate with integral
ambidextrous QD sling attachment point.
• Completed with Magpul furniture and one PMAG magazine.
• Rifle Weight – 6.57 lbs

SKU
AR15-BIL-223-CF-16-B

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// BILLET RIFLE 5.56 NATO – 16"
ZEV Billet Rifles are born of innovative design, the highest quality
materials, state-of-the-art manufacturing processes, and rigid standards
for impeccable quality and finish work. Using best-in-class components
each rifle is assembled and tested in-house by our expert gunsmiths
resulting in a light weight, versatile, and high performance firearm.
Designed and manufactured in the USA.

Features:
• ZEV Billet Upper and Lower receivers are precision-machined from 7075-
T651 aluminum for strength and light weight, complete with an integral
trigger guard, flared magwell, and finished in true black type III class 2
hard coat anodize.
• ZEV Wedge Lock hand guard provides a full length continuous top rail
with M-LOK mounting system for maximum user customization and
control, integrated anti-rotation pin ensures a consistent and continuous
top-rail with the upper receiver.
• ZEV Slide Lock charging handle permits ambidextrous manipulation with
an extended and textured latch for superior grip and ergonomics.
• ZEV custom 416R 16” fluted match barrel with bronze PVD coating,
chambered in 5.56 NATO with a 1:7 twist and mid-length gas system.
Capable of consistent sub-MOA accuracy with high quality factory
ammunition.
• ZEV exclusive sniper grey flat face AR Gold trigger from ATC features a
2.5lb pull with a short reset and clean break that is second to none.
• Ambidextrous operating controls for the safety selector, bolt release, and
magazine release.
• Low profile fixed gas block.
• SureFire WARCOMP closed tine flash hider to aid in recoil management
and muzzle flash reduction. Serves as a mounting adapter for all SureFire
SOCOM fast attach suppressors.
• H3 carbine buffer increases dwell time and reduces port-pressure to
ensure reliable extraction and a smooth recoil impulse.
• Mil-spec carbine buffer tube provides six buttstock adjustment positions
for user customization and comfort.
• Mil-spec staked castle nut with Magpul ASAP QD endplate with integral
ambidextrous QD sling attachment point.
• Completed with Magpul furniture and one PMAG magazine.
• Rifle Weight – 6.98 lbs

SKU
AR15-BIL-556-16-B

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// BILLET RIFLE – LARGE FRAME .308 WINCHESTER – 16"
ZEV Billet Rifles are born of innovative design, the highest quality
materials, state-of-the-art manufacturing processes, and rigid standards
for impeccable quality and finish work. Using best-in-class components
each rifle is assembled and tested in-house by our expert gunsmiths
resulting in a light weight, versatile, and high performance firearm.
Designed and manufactured in the USA.

Features:
• ZEV Billet Upper and Lower receivers are precision-machined from 7075-
T651 aluminum for strength and light weight, complete with an integral
trigger guard, flared magwell, and finished in true black type III class 2
hard coat anodize.
• ZEV Wedge Lock hand guard provides a full length continuous top rail
with M-LOK mounting system for maximum user customization and
control, integrated anti-rotation pin ensures a consistent and continuous
top-rail with the upper receiver.
• ZEV Slide Lock charging handle permits ambidextrous manipulation with
an extended and textured latch for superior grip and ergonomics.
• ZEV match grade 4150 Chrome Moly 16” barrel with QPQ corrosion
resistant finish chambered in .308 Winchester with a 1:10 twist and mid-
length gas system. Capable of consistent sub-MOA accuracy with high
quality factory ammunition.
• ZEV exclusive sniper grey flat face AR Gold trigger from ATC features a
2.5lb pull with a short reset and clean break that is second to none.
• Ambidextrous operating controls for the safety selector, bolt release, and
magazine release.
• Low profile fixed gas block.
• SureFire ProComp muzzle brake to aid in recoil management.
• H3 carbine buffer increases dwell time and reduces port-pressure to
ensure reliable extraction and a smooth recoil impulse.
• Mil-spec buffer tube provides six buttstock adjustment positions for user
customization and comfort.
• Mil-spec staked castle nut with Magpul ASAP QD endplate with integral
ambidextrous QD sling attachment point.
• Completed with Magpul furniture and one PMAG magazine.
• Rifle Weight – 7.84 lbs

SKU
LF-BIL-308-16-B

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// CORE ELITE .300 BLACKOUT – 8.5"
ZEV CORE ELITE Pistols are intended for serious shooters and represent
the commitment to design, feel, performance that ZEV is known for.
This AR pistol features the high quality and aesthetics of ZEV rifle
products with a combination of traditional mil-spec controls and functional
upgrades that deliver excellent performance in the field or on the range.

Features:
• ZEV forged upper and lower receivers precision machined from
7075-T6 aluminum for strength and light weight, finished in true black
type III class 2 hard coat anodize.
• ZEV Wedge Lock hand guard provides a full length continuous top rail
with M-LOK mounting system. The integrated anti-rotation pin ensures
a consistently aligned and continuous top rail with the upper receiver.
• ZEV custom 416R 8.5” match barrel with bronze PVD coating,
chambered in .300 Blackout with a 1:7 twist and pistol length gas
system.
• Low profile fixed gas block.
• H3 carbine buffer increases dwell time and reduces port pressure
to ensure reliable extraction and a smooth recoil impulse.
• Direct thread Warden Blast Diffuser by SureFire directs the concussive
blast of the fired round forward of the weapon system without venting
gas to the side, as seen with standard muzzle brakes.
• Mil-spec chrome lined BCG with a manganese phosphate finish
for improved lubricity and corrosion resistance.
• ZEV exclusive sniper grey flat face AR Gold trigger from ATC features
a 2.5lb pull with a short reset and clean break that is second to none.
• Radian Weapons Talon ambidextrous safety selector.
• SBA3 4-position adjustable brace by SB Tactical greatly enhances
the usability of the firearm by adding a third point of contact.
• ZEV Slide Lock charging handle permits ambidextrous manipulation
with an extended and textured latch for superior grip and ergonomics.
• Completed with Magpul MIAD hand grip and one PMAG magazine.
• Pistol Weight – 5.66 lbs, 25˝ overall length.

SKU
AR15-CE-300-8.5-B

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// CORE ELITE 5.56 NATO – 10.5"
ZEV CORE ELITE Pistols are intended for serious shooters and represent
the commitment to design, feel, performance that ZEV is known for.
This AR pistol features the high quality and aesthetics of ZEV rifle
products with a combination of traditional mil-spec controls and functional
upgrades that deliver excellent performance in the field or on the range.

Features:
• ZEV forged upper and lower receivers precision machined from
7075-T6 aluminum for strength and light weight, finished in true black
type III class 2 hard coat anodize.
• ZEV Wedge Lock hand guard provides a full length continuous top rail
with M-LOK mounting system. The integrated anti-rotation pin ensures
a consistently aligned and continuous top rail with the upper receiver.
• ZEV custom 416R 10.5” match barrel with bronze PVD coating,
chambered in 5.56 NATO with a 1:7 twist and carbine length gas
system.
• Low profile fixed gas block.
• H3 carbine buffer increases dwell time and reduces port pressure
to ensure reliable extraction and a smooth recoil impulse.
• Direct thread Warden Blast Diffuser by SureFire directs the concussive
blast of the fired round forward of the weapon system without venting
gas to the side, as seen with standard muzzle brakes.
• Mil-spec chrome lined BCG with a manganese phosphate finish
for improved lubricity and corrosion resistance.
• ZEV exclusive sniper grey flat face AR Gold trigger from ATC features
a 2.5lb pull with a short reset and clean break that is second to none.
• Radian Weapons Talon ambidextrous safety selector.
• SBA3 4-position adjustable brace by SB Tactical greatly enhances
the usability of the firearm by adding a third point of contact.
• ZEV Slide Lock charging handle permits ambidextrous manipulation
with an extended and textured latch for superior grip and ergonomics.
• Completed with Magpul MIAD hand grip and one PMAG magazine.
• Pistol Weight – 6.14 lbs, 27˝ overall length.

SKU
AR15-CE-556-10.5-B

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// CORE ELITE 5.56 NATO – 16"
ZEV CORE ELITE Rifles are intended for serious shooters and represent the
commitment to design, feel, performance that ZEV is known for.
This rifle features the high quality and aesthetics of ZEV rifle products with
a combination of traditional mil-spec controls and functional upgrades that
deliver excellent performance in the field or on the range.

Features:
• ZEV forged upper and lower receivers precision machined from
7075-T6 aluminum for strength and light weight, finished in true black
type III class 2 hard coat anodize.
• ZEV Wedge Lock hand guard provides a full length continuous top rail
with M-LOK mounting system. The integrated anti-rotation pin ensures
a consistently aligned and continuous top rail with the upper receiver.
• ZEV custom 416R 16” fluted match barrel with bronze PVD coating,
chambered in 5.56 NATO with a 1:7 twist and mid-length gas system.
Capable of consistent sub-MOA accuracy with high quality factory
ammunition.
• Low profile fixed gas block.
• H3 carbine buffer increases dwell time and reduces port pressure
to ensure reliable extraction and a smooth recoil impulse.
• SureFire WARCOMP closed tine flash hider to aid in recoil management
and muzzle flash reduction. Serves as a mounting adapter for all
SureFire SOCOM fast attach suppressors.
• Mil-spec chrome lined BCG with a manganese phosphate finish
for improved lubricity and corrosion resistance.
• ZEV exclusive sniper grey flat face AR Gold trigger from ATC features
a 2.5lb pull with a short reset and clean break that is second to none.
• Radian Weapons Talon ambidextrous safety selector.
• ZEV Slide Lock charging handle permits ambidextrous manipulation
with an extended and textured latch for superior grip and ergonomics.
• Completed with Magpul furniture and one PMAG magazine.
• Rifle Weight – 6.67 lbs, 32.5˝ overall length with stock collapsed.

SKU
AR15-CE-556-16-B

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// BILLET RECEIVER SET AR15
The ZEV Technologies AR15 Billet Receiver Set was designed to
complement the enhanced features of the ZEV rifle product line while
retaining compatibility with most mil-spec accessories to give you the
most options for completing your build.
All receivers are precision-machined from solid billet aluminum and are
held to extremely tight tolerances and high quality standards to ensure
consistent fit and function. With its ambidextrous features, light weight,
and superior finish, the ZEV Billet Receiver Set is the perfect foundation for
any rifle build.

ZEV Billet Receiver Set features:

• Machined from American-made 7075-T651 billet aluminum
• True black Type III Class 2 hard coat anodize
• M4 feed ramps cut standard
• Integrated and enlarged trigger guard
• Generous flare-cut magazine well to facilitate quick magazine insertion
• Ambidextrous bolt release
• Ambidextrous magazine release
• Threaded bolt catch for ease of assembly and disassembly compared
to traditional roll pins
• Enhanced charging handle latch locking point prevents wear to the
upper receiver
• Compatible for use with the unique ZEV Slide Lock ambidextrous
charging handle (sold separately)
• Compatible with the ZEV Wedge Lock hand guard integral anti-rotation
pin for consistent alignment of the top rail (sold separately)
• All proprietary components are included

MODEL WEIGHT SKU

AR15 BILLET SET 17.3 oz. REC.SET-556-BIL

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// BILLET RECEIVER SET LARGE FRAME
The ZEV Technologies Large Frame Billet Receiver Set was designed to
complement the enhanced features of the ZEV rifle product line while
retaining compatibility with SR25/DPMS pattern accessories to give you
the most options for completing your build.
All receivers are precision-machined from solid billet aluminum and are
held to extremely tight tolerances and high quality standards to ensure
consistent fit and function. With its ambidextrous features, light weight,
and superior finish, the ZEV Billet Receiver Set is the perfect foundation for
any rifle build.

ZEV Billet Receiver Set features:

• Machined from American-made 7075-T651 billet aluminum
• True black Type III Class 2 hard coat anodize
• Integrated and enlarged trigger guard
• Generous flare-cut magazine well to facilitate quick magazine insertion
• Ambidextrous bolt release
• Ambidextrous magazine release
• Threaded bolt catch for ease of assembly and disassembly compared
to traditional roll pins
• Enhanced charging handle latch locking point prevents wear to the
upper receiver
• Compatible for use with the unique ZEV Slide Lock ambidextrous
charging handle (sold separately)
• Compatible with the ZEV Wedge Lock hand guard integral anti-rotation
pin for consistent alignment of the top rail (sold separately)
• Ejection port cover comes pre-installed
• All proprietary components are included

MODEL WEIGHT SKU

LF BILLET SET 21.5 oz. REC.SET-308-BIL

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// FORGED LOWER RECEIVER AR15
The ZEV Technologies Forged AR-15 Lower Receiver comes stripped and
ready for your next custom AR build. ZEV starts with high-quality 7075
T6 aluminum forgings and final machines them to better than mil-spec
dimensions held to ±.001" tolerances, giving you maximum compatibility
with mil-spec and aftermarket parts and accessories.
The ZEV Technologies Forged AR-15 Lower Receiver offers superb
strength and versatility for building an AR-15 configured exactly the way
you want it.

ZEV Forged Lower Receiver features:

• Machined from Forged American Made 7075-T651 aluminum
• Machined with BETTER that Mil-Spec requirements, with critical tooling
dimensions held within +/- .001”
• True Black Class 2 Type 3 Hard coat anodize
• Features the original “GATOR GRIP” texture on the front of the mag
strap for added grip
• Generous flare cut to the magazine well for quick magazine changes
• Nylon tipped tension screw for adjusting fitment to various uppers

MODEL WEIGHT SKU

ZEV FORGED LOWER 7.2 oz. LR-556-FOR

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// FORGED UPPER RECEIVER AR15
The ZEV Technologies Forged AR-15 Upper Receiver comes stripped and
ready for your next custom AR build. ZEV starts with high-quality 7075
T6 aluminum forgings and final machines them to better than mil-spec
dimensions held to ±.001" tolerances, giving you maximum compatibility
with mil-spec and aftermarket parts and accessories.
The ZEV Technologies Forged AR-15 Upper Receiver offers superb
strength and versatility for building an AR-15 configured exactly the way
you want it.

ZEV Forged Upper Receiver features:

• Machined from Forged American Made 7075-T651 aluminum
• Machined with BETTER that Mil-Spec requirements,
with critical tooling dimensions held within +/- .001”
• True Black Class 2 Type 3 Hard coat anodize
• Compatible with all Mil-Spec parts kits
• M4 feed ramps cut standard

MODEL WEIGHT SKU

ZEV FORGED UPPER 7.2 oz. UR-556-FOR

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// HAND GUARD WEDGE LOCK – AR15
The most technologically advanced hand guard on the market today. The
ZEV Technologies Wedge Lock Hand Guard attaches to the receiver via
an innovative system built around a two-piece Wedge Lock system that
tightens down securely with only one screw.
Machined from aircraft grade aluminum to keep the wall thickness thin,
but still strong enough for any environment.
The narrow cross-section of the hand guard provides for an excellent
ergonomic grip while the M-LOK negative space mounting system provides
7" Shown
a smooth, hand-friendly surface in place of Picatinny rails.

ZEV Wedge Lock hand guard features:

• Black type III hard anodized aluminum hand guard
• Black Nitride coated wedge system
• One piece free float design with continuous top rail
• Compatible with all mil-spec upper receivers
• Compatible with low profile gas bocks
• Integral anti-rotation pin compatible with ZEV billet upper ensures
consistent alignment of the top rail
9.25" Shown
• M-LOK compatible accessory mounting points for
user customization
• Internal diameter of 1.225”

NOTE: The ZEV Wedge Lock is not designed for a suppressor to be

mounted under the hand guard.

US PATENT 9,335,117

12.625" Shown
Includes:
• Wedge System
• Stainless Steel Barrel Nut
• Assembly Tools

14.625" Shown

MODEL LENGTH SKU

7" HG-556-WEDGE-7
16.625" Shown
9.25" HG-556-WEDGE-9
12.625" HG-556-WEDGE-12
14.625" HG-556-WEDGE-14
16.625"
100%
HG-556-WEDGE-16
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// HAND GUARD WEDGE LOCK – LARGE FRAME
The most technologically advanced hand guard on the market today.
The ZEV Technologies Wedge Lock Hand Guard attaches to the receiver
via an innovative system built around a lightweight Titanium barrel nut
(included) and the two-piece Wedge Lock system that tightens down
securely with only one screw.
Machined from aircraft grade aluminum to keep the wall thickness thin,
but still strong enough for any environment.
The narrow cross-section of the hand guard provides for an excellent
12.625" Shown
ergonomic grip while the M-LOK negative space mounting system provides
a smooth, hand-friendly surface in place of Picatinny rails.

ZEV Wedge Lock hand guard features:

• Black type III hard anodized aluminum hand guard
• Black Nitride coated wedge system
• One piece free float design with continuous top rail
• Compatible with KAC/DPMS high profile
upper receivers
• Compatible with low profile gas bocks
• Integral anti-rotation pin compatible with ZEV billet upper ensures
consistent alignment of the top rail
• Titanium barrel nut reduces weight and aids in
heat dissipation
14.625" Shown
• M-LOK compatible accessory mounting points for
user customization

• Internal diameter of 1.325˝

US PATENT 9,335,117

Includes:
• Wedge System
• Titanium Barrel Nut
• Assembly Tools

16.625" Shown

MODEL LENGTH SKU

12.625" HG-308-WEDGE-12
14.625" HG-308-WEDGE-14
16.625" HG-308-WEDGE-16

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM

ZEV// SLIDE LOCK CHARGING HANDLE AR15 , LARGE FRAME
The ZEV Technologies Slide Lock Charging Handle is a unique design
that features smooth ambidextrous operation with fewer moving parts
than any other charging handle on the market. Machined from a single
piece of 7075-T6 billet aluminum for strength and durability.

Features:
• Fully ambidextrous
• Extended and textured handle for superior grip and ergonomics
• Machined from American-made 7075-T6 billet aluminum
• True black Type III Class 2 hard coat anodize
• Black nitride steel capture latch

NOTE:
Designed exclusively for use with ZEV billet upper receivers, not
recommended for use with forged upper receivers.

MODEL WEIGHT SKU

AR-15 CHARGING HANDLE 1.3 oz. CH-556-AMB

LARGE FRAME CHARGING HANDLE 1.4 oz. CH-308-AMB

Does not require a latch to be pulled

to release charging handle.

100%
MADE IN USA

100%
MADE IN USA
100%
MADE IN USA

100%
MADE IN USA

2120 NORTHPARK DRIVE • CENTRALIA, WA 98531 ZEVTECH.COM