MTMA-800/E900-12dB-2eNodeBport2ANTport-AISG

Model: ATADU2001 (AISG 2.0)

Product Description

The multiband tower mounted amplifier (MTMA) is a low-noise amplifier installed near the antenna to
satisfy the co-siting purposes. It helps to improve the signal-to-noise ratio and enhance the receiving
sensibility of the BTS system. It enhances the uplink coverage and improves uplink and downlink imbalance
of the base station. It effectively reduces the transmitting power of cellphones, improves voice and data
communication quality. When scanning the AISG ALD, the MTMA can be operated from one primary
controller, either on NodeB0 or NodeB1 port. When scanning the AISG ALD, the TMA is responding to the
AISG controller with two individual serial numbers (unique IDs) with each their two subunits (two subunits per
frequency band).

Features

 High linearity and low noise performance.

Appearance and Block Diagram

1
MTMA-800/E900-12dB-2eNodeBport2ANTport-AISG
Model: ATADU2001 (AISG 2.0)

Tx Specifications
Frequency range (MHz) 791 - 821 925 - 960
Bandwidth (MHz) 30 35
Insertion loss (dB) Typ. < 0.4
Return loss (dB) ≥ 18
< 160 (+52 dBm) CW
Input power (W)
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBm) ≤ -110 (3rd order; with 2 x 43 dBm)

Rx Specifications
Frequency range (MHz) 832 - 862 880 - 915
Bandwidth (MHz) 30 35
≥ 18 (DC ON)
Return loss(dB)
≥ 14 (DC OFF)
Insertion loss in by-pass mode (dB) Typ. < 3.0
Gain (dB) 12 ±1
Noise figure (dB) Typ. < 1.3
Output 1dB compression (dBm) ≥ 12
OIP3 (dBm) ≥ 24

Electrical Specifications
DC supply voltage (V) 9 - 30
@12 V 245 ±5
Operating current per TMA (mA)
@17 V 175 ±5
(without RET)
@30 V 105 ±5
Alarm management AISG
Power consumption (W) < 3.0

Environmental Specification
Operating temperature range (℃) -40 ... +65
IP rating IP67
MTBF (hours) > 1,000,000
EMC ETS 300 342-3
Lightning protection (kA) 10 (8/20 us)

Mechanical Specification
247 x 342 x 132
MTMA dimensions (W x H x D) (mm)
(without connectors, without brackets)
Packing dimensions (W x H x D) (mm) 300 x 545 x 250
MTMA weight (kg) ≤ 10.5 (with brackets)
Packing weight (kg) ≤ 12.3
MTMA Volume (L) Approx. 10.8
8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B, pin5: RS485A,
AISG connector
pin7: DC return, other pins: not connected)
Wall mounting: with 4 screws (max. 8 mm diameter)
Mounting
Mast mounting
Mast diameter (mm) Default: 30 - 125 // Optional: 40 - 140
Connector 4 x 7/16 DIN Female ( Two ports are eNodeB and two ports are ANT)

2
 MTMA-800/E900-12dB-2eNodeBport2ANTport-AISG
Model: ATADU2001 (AISG 2.0)

Unit : mm

Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com

Any previous datasheet issues become invalid. 3 Issue: 2014-07-02