Scribd
Upload
78 views2 pages

Welding 2

This welding inspection report documents an inspection of a single SS 400 weld joint using 2F and 2G welding positions. The report lists 27 check points that were inspected, including fit-up, tack welds, edge preparation, root gap, preheat requirements, interpass temperature, weld size, and various weld imperfections. Non-destructive testing methods like PT, MT, and RT were used in the inspection. The report was reviewed and approved by the client.

Uploaded by

Kilerz 91
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
78 views2 pages

Welding 2

This welding inspection report documents an inspection of a single SS 400 weld joint using 2F and 2G welding positions. The report lists 27 check points that were inspected, including fit-up, tack welds, edge preparation, root gap, preheat requirements, interpass temperature, weld size, and various weld imperfections. Non-destructive testing methods like PT, MT, and RT were used in the inspection. The report was reviewed and approved by the client.

Uploaded by

Kilerz 91
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

WELDING INSPECTION REPORT ( WIR )

PROJECT : REPORT No : /WIR/NAMA PT/IX/2021


CLIENT : DATE :
MATERIAL : SS 400 POSITION WELDING : 2F & 2G
QTY : 1
NO MARKING WELDER NO. JOINT TYPE JOINT LEG SIZE ACC/REP REMARK
1 005 J1 FW mm ACC
2
3
4
5

NO CHECK POINT RESULT REMARK


1 FIT-UP ACCEPT REJECT
CONDITION

2 TACK WELD CONDITION GOOD BAD


3 EDGE PREPARATION GOOD BAD
4 ROOT GAP ACCEPT REJECT
5 WITH BACKING PLATE YES NO
6 PREHEAT REQUIRED YES NO TEMP -- C
0

7 INTERPASS TEMPERATURE YES NO TEMP 350 C


0

8 INTERPASS CLEANING ACCEPT REJECT


9 WELD SIZE ACCEPT REJECT
IMPERFECTION

10 UNDERCUT YES NO
11 POROSITY YES NO
12 OVERLAP YES NO
13 SPATTER YES NO
14 WELD BEAD GOOD BAD
15 CRACK YES NO
16 ARC STRIKE YES NO
17 SLAG INCLUSION YES NO
18 SMAW YES NO AWS E 7018
19 GMAW YES NO
PROCESS
WELD

20 FCAW WITH CO2 GAS YES NO AWS E 71 T -1


21 WITHOUT CO GAS
2
YES NO
22 SAW ( for built-up ) YES NO AWS A.5.17.EH 14
23 STUD WELDING YES NO
24 PENETRANT TEST ( PT ) YES NO
NDT

25 MAGNETIC PARTICLE TEST ( MT YES NO


26 RADIOGRAPHIC TEST ( RT ) YES NO
27 ULTRASONIC TEST ( UT ) YES NO
INSPECTED BY PT. BBC REVIEW/WITNESS BY PT. REVIEWED AND APPROVED
QC INSPECTOR QC INSPECTOR BY CLIENT
( Danni Kurniawan ) ( ) ( )

You might also like