floor hardex Formerly "Hardex" FLOORING
Epoxy sealer, hardener and dust-proofer
PRODUCT
floor hardex is a two-component epoxy system
designed to penetrate and seal concrete surfaces.
It improves the resistance of concrete to chemicals and daily
abrasion, and reduces its absorption of water and salts.
SCOPE OF USE
• Parking decks
• Bridge decks
• Industrial floors
• Food industry floors
CHARACTERISTICS
Color Clear or Grey
Finish Semi-gloss
Solid content ≥ 60% by volume PACKAGING
Density 1.40 (Grey)
1.05 (Transparent) Leb Syria Jordan UAE Qatar Kuwait KSA Oman
Pot life 3 hours at 20°C 20 lit 20 lit 20 lit 20 lit 20 lit 20 lit 20 lit 20 lit
Flash point > 28°C
Suitable for foot traffic after 12-24 hours
Suitable for wheel traffic after 48 hours.
Grey: 0.2 litre/m²
INSTRUCTIONS FOR USE NB: The concrete surface greatly affects coverage rate and
SUBSTRATE PREPARATION final appearance.
Substrate must be clean, sound and free form greasy
matters and dust. Remove all traces of curing compounds, STORAGE
old paints and sealer, and debris which may affect the One year after manufacturing date in its original packing non
adhesion. Before the application the substrate must be open and in dry cool area.
sufficiently cured in a way that any shrinkage has already
occurred. New concrete must be at least 28 days old with SAFETY PRECAUTIONS
open pores. Application should be done in a ventilated area away from
For maximum penetration of the product, it is recommended any heat source, and should be avoided when smoking.
to sandblast or to shot-blast the surface. Allow the concrete Wear protective gear for hands and eyes and avoid breathing
to completely dry before starting the application. of vapour. Splashes on the skin should be washed away
immediately by cleaning thoroughly with soap and water. In
PRODUCT PREPARATION case of contact with eyes, wash thoroughly with clean water
Add part B to Part A and mix for 2 - 3 minutes by an electric and seek immediate medical attention. If swallowed, do not
mixer with low rotation speed (< 300 rpm). induce vomiting and seek immediate medical attention. In
The epoxy must be well mixed to ensure proper chemical case of fire, use CO2 foam to extinguish. Tightly seal containers
reaction. when not in use, store them away from heat and carefully
After mixing, apply immediately. dispose empty ones.
PRODUCT APPLICATION DISCLAIMER
floor hardex is applied using a roller, pump-up or an While the company guarantees its products against defective
airless sprayer. materials, the use and application of these products are
made without guarantee since the conditions of their application
CONSUMPTION are beyond its control. It is recommended to verify with the
Clear: 0.1 litre/m² company that the product is suitable for the intended use,
1/2 Technical data sheet . Edition: 08.14-A www.sodamco-weber.com
floor hardex FLOORING
and that this Data Sheet version is the latest one. The company
may modify it without prior notice. Technical characteristics
are listed for guidance only. For more information, please
contact the company’s office in your location.
NOTE
The information included on this Technical Data Sheet is the
sole property of SODAMCO Holding. The unauthorized disclosure,
use, dissemination or copying (either whole or partial) of this
data sheet or any information it contains, is prohibited and
subject to legal pursuit.
PG:22
2/2 Technical data sheet . Edition: 08.14-A www.sodamco-weber.com
