DZ,DZH ELECTRIC DOUBLE LAYER CAPACITORS “DYNACAP” ®
*5((1 Ý& 9
6WDQGDUG/DUJHFDSDFLWDQFHW\SH&DSDFLWRUV &$3 Ý& 9
●
Pollution-Free ; with no pollutants such as Cd or Pb.
●
Unlike batteries ; excellent charge and
discharge characteristics with no chemical /DUJHFDSDFLWDQFH
reactions
'=+ '=
Specifications Marking color : White print on a black sleeve
Item Performance
Series name Series DZ Series DZH
Category temperature range (℃) ー25 to ＋70 ー25 to ＋60
Tolerance at rated capacitance (%) ー20 to ＋80 ー20 to ＋80
Internal resistance
Refer to the following page
at 1kHz
Characteristics at high and Percentage of capacitance change Within ±30% of the value at 20℃ Percentage of capacitance change Within ±30% of value at 20℃
low temperature Internal resistance Less than five times of the value at 20℃ Internal resistance Less than eight times of the value at 20℃
Test temperature 70℃ Test temperature 60℃
Test time 1000 hours Test time 2000 hours
Endurance
Percentage of capacitance change Within ±30% of the initial measured value Percentage of capacitance change Within ±30% of the initial measured value
Internal resistance Less than four times of the initial specified value Internal resistance Less than four times of the initial specified value
Shelf life Same as endurance Same as endurance
Applicable standards Conforms to JIS C5160-1 2009 (IEC 62391-1 2006)
Outline Drawing Unit : mm
φ6.3 to φ18 φ25, 35
φd±0.05
2‒φ2
9HQW Sleeve copper clad steel wire (tinned) Sleeve
Lug terminal details
10
10 0.9±0.1 Thickness : 0.8t
±
φD＋0.5max.
0.
φD＋1max.
2.6
F±0.5
6.8
7.5
Markings 1.5±0.1
5
L＋α max. 15min. min.
L＋2max. 2.1
Position of printed
(‒) Negative terminal circuit board holes
φD 6.3 8 10 12.5 16 18 Vent ±1
indicated by cross notching
F 2.5 3.5 5.0 7.5
φd 0.6 0.8
α 2.0
Part numbering system (example : 2.5V10F)
DZ ̶ 2R5 D 106 (H8) T
Rated voltage Terminal Rated capacitance Casing
Series code
symbol code symbol symbol
Part number is refer to the following page.
Electric Double Layer Capacitors
NOTE
CAT.No.2013/2014E
202 Design, Specifications are subject to change without notice.
Ask factory for technical specifications before purchase and/or use.
®
ELECTRIC DOUBLE LAYER CAPACITORS “DYNACAP” DZ,DZH
Standard Ratings (Series DZ 2.5V)
Internal resistance Internal resistance (mΩ)
Max. operating voltage (V) Rated capacitance (F) Max. Leakage Current (mA) after 24h ELNA Parts No. φD×L (mm) (Ω max.) at 1kHz at 1kHz (measurement value)
2.5 0.9 0.1 DZ-2R5D904F4T 6.3×14.0 1.0 400
2.5 1.0 0.1 DZ-2R5D105G3T 8.0×12.0 1.0 200
2.5 1.0 0.1 DZ-2R5D105G4T 8.0×15.0 1.0 200
2.5 1.0 0.1 DZ-2R5D105T 8.0×22.0 1.0 150
2.5 2.7 0.2 DZ-2R5D275G5T 8.0×22.0 0.5 150
2.5 3.3 0.2 DZ-2R5D335H5T 10.0×20.0 0.3 70
2.5 3.3 0.2 DZ-2R5D335T 12.5×23.0 0.3 70
2.5 4.7 0.3 DZ-2R5D475H5T 10.0×20.0 0.2 80
2.5 4.7 0.3 DZ-2R5D475T 12.5×31.5 0.2 40
2.5 6.8 0.4 DZ-2R5D685H7T 10.0×30.0 0.2 50
2.5 10 0.5 DZ-2R5D106H8T 10.0×35.0 0.2 40
2.5 10 0.5 DZ-2R5D106Z7T 12.5×31.5 0.2 40
2.5 10 0.5 DZ-2R5D106T 18.0×35.0 0.2 30
2.5 15 0.7 DZ-2R5D156J5T 16.0×20.0 0.2 35
2.5 20 0.8 DZ-2R5D206K8T 18.0×35.0 0.2 30
2.5 20 0.8 DZ-2R5D206T 18.0×40.0 0.2 30
2.5 22 0.8 DZ-2R5D226J6T 16.0×25.0 0.2 30
2.5 30 0.8 DZ-2R5D306K9T 18.0×40.0 0.2 30
2.5 33 0.8 DZ-2R5D336J8T 16.0×35.5 0.2 30
2.5 50 1.0 DZ-2R5D506T 25.0×40.0 0.08 20
2.5 100 1.0 DZ-2R5D107S37T 25.0×50.0 0.08 15
2.5 100 1.0 DZ-2R5D107T 35.0×50.0 0.08 15
2.5 200 2.0 DZ-2R5D207S57T 35.0×50.0 0.08 15
We tailor packaged product in series and parallel arrangements according to voltage and capacitance as required.
Standard Ratings (Series DZ 2.7V)
Internal resistance Internal resistance (mΩ)
Max. operating voltage (V) Rated capacitance (F) Max. Leakage Current (mA) after 24h ELNA Parts No. φD×L (mm) (Ω max.) at 1kHz at 1kHz (measurement value)
2.7 0.9 0.2 DZ-2R7D904F4T 6.3×14.0 1.0 400
2.7 1.0 0.2 DZ-2R7D105G3T 8.0×12.0 1.0 200
2.7 1.0 0.2 DZ-2R7D105G4T 8.0×15.0 1.0 200
2.7 1.0 0.2 DZ-2R7D105G5T 8.0×22.0 1.0 150
2.7 2.7 0.3 DZ-2R7D275G5T 8.0×22.0 0.5 150
2.7 3.3 0.3 DZ-2R7D335H5T 10.0×20.0 0.3 100
2.7 3.3 0.3 DZ-2R7D335Z6T 12.5×23.0 0.3 70
2.7 4.7 0.4 DZ-2R7D475H5T 10.0×20.0 0.2 80
2.7 4.7 0.4 DZ-2R7D475Z7T 12.5×31.5 0.2 40
2.7 6.8 0.5 DZ-2R7D685H7T 10.0×30.0 0.2 50
2.7 10 0.6 DZ-2R7D106H8T 10.0×35.0 0.2 40
2.7 10 0.6 DZ-2R7D106Z7T 12.5×31.5 0.2 40
2.7 10 0.6 DZ-2R7D106K8T 18.0×35.0 0.2 30
2.7 15 0.8 DZ-2R7D156J6T 16.0×25.0 0.2 35
2.7 20 1.0 DZ-2R7D206K8T 18.0×35.0 0.2 30
2.7 20 1.0 DZ-2R7D206K9T 18.0×40.0 0.2 30
2.7 22 1.0 DZ-2R7D226J7T 16.0×31.5 0.2 30
2.7 30 1.0 DZ-2R7D306K9T 18.0×40.0 0.2 30
2.7 33 1.0 DZ-2R7D336J9T 16.0×40.0 0.2 30
We tailor packaged product in series and parallel arrangements according to voltage and capacitance as required.
Standard Ratings (Series DZH 2.5V)
Internal resistance Internal resistance (mΩ)
Max. operating voltage (V) Rated capacitance (F) Max. Leakage Current (mA) after 24h ELNA Parts No. φD×L (mm) (Ω max.) at 1kHz at 1kHz (measurement value)
2.5 50 1.0 DZH-2R5D506K9T 18.0×40.0 0.08 30
2.5 100 2.0 DZH-2R5D107S35T 25.0×40.0 0.08 20
2.5 300 5.0 DZH-2R5D307S57T 35.0×50.0 0.08 15
We tailor packaged product in series and parallel arrangements according to voltage and capacitance as required.
Electric Double Layer Capacitors
NOTE
Design, Specifications are subject to change without notice.
Ask factory for technical specifications before purchase and/or use.
203 CAT.No.2013/2014E
