19:00, 30/11/2022 IFTOMM

IFToMM 1982 1.1 Vibratory Problems on Gas Turbine Rotors G. Sacchi and B. Moro 7
Sponsored by
IFToMM 1982 1.2 Analysis of Turbogenerator Operation Defects on the Basis of Their Vibratory
Behaviour A. Benanti, C. Frigeri, A. Macchi, T. Rossini and M. Marinelli 17
IFToMM 1982 1.3 Investigation into Output Dependent Rotordynamic Instability of the High
Pressure Rotor on a Large Turbogenerator S.H. Greathead and M. Slocombe 27
IFToMM 1982 1.4 Double Frequency Vibration in Large Turbogenerator Rotors a Design Problem
Home W. Kellenberger and P. Rihak 37
IFToMM 1982 1.5 Some Results on the Twice per Revolution Balancing of Generators N.
Booklist Bachschmid and C. Frigeri 49
IFToMM 1982 1.6 Rotor-Support Parametric Instability Limits in Terms of Rotor Receptances in
Authored Papers
Rotating Axes J.M. Krodkiewski and Z.A. Parszewski 55
IFToMM 1982 1.7 Parametric Resonance in a Gyroscopic Rotor Driven through Hooke's loint
Conference List
Mechanism D. Ardayfio 67
IFToMM 1982 1.8 Economic Solutions of Rotordynamics Problems M. Balda 71
Search Paper Database
IFToMM 1982 1.9 Quasi Modal Nonlinear Analysis for Seismic Response in Pump Rotors M. Kaga,
K. Kikuchi, O. Matsushita, M. Takagi and M. Furudono 83
IFToMM 1982 1.10 Modal Parameter Identification and Sensityvity Analysis in Rotating Machinery
R. Nordmann 95
IFToMM 1982 1.11 Sensitivity of The Eigenvalues of Rotors to Parameter Modifications c.P. Fritzen
and R. Nordmann 103
IFToMM 1982 1.12 Potential Of Transfer Function Control of Rotor Whip and Balance J. Mahig 111
IFToMM 1982 1.13 Studies of Non-Linear Vibrations and the Stability of an Unbalanced Rotor
with a Cavity Partially Filled with Viscous Fluid V.A. Djoldasbekov, E.R. Rakhimovand A.S.
Rakhmatullaev 117
IFToMM 1982 2.1 Rotor Dynamics of Non Symmetrical Rotor-Bearing-Frame Systems H. Alberg
123

www.rotordynamics.org/paperlists/IFTOMM.html 1/95
19:00, 30/11/2022 IFTOMM

IFToMM 1982 2.2 Dynamic Interacting Response of Large Turbine-Generators Supported on

Foundations of Different Flexibilities I.K. Aneja 129
IFToMM 1982 2.3 Fan-Foundation Interaction - A Computerized Solution H. Ming Chen, V. Sgroi
and S.B. Malanovsky 139
IFToMM 1982 2.4 Dynamic Analysis ofa 660 MWTurbogenerator Foundation N. Bachschmid, R.
Bernanteand C. Frigeri 151
IFToMM 1982 2.5 Development of an Impact Exciter for Large Structures and Results of a First
Application K. Schollhorn 163
IFToMM 1982 2.6 Modal Resolution of Transient Vibrations in Rotor-Bearing-Foundation Systems
Caused by Electrical System Faults T. Jainski 177
IFToMM 1982 2.7 A Parametric Analysis for Vibrating Machine Foundations G.c. Beolchini 191
IFToMM 1982 2.8 A Method for Evaluting the Sensitivity of a Turbo-Generator Shaft Line
Vibrational Behaviour to Changes in Bearing Coefficients I. W. Mayes and W.G.R. Davies 203
IFToMM 1982 2.9 A Forced Vibration Method to Calculate the Oil Film Instability Threshold or
Rotor-Foundation Systems G. Diana, E. Massa, B. Pizzigoni and C. Marcantoni- Taddei 207
IFToMM 1982 3.1 Mistuned Bladed Disks-Dynamical Behaviour and Computattion H. Irretierand
KJ. Schmidt 215
IFToMM 1982 3.2 Vibration Analysis of Steam Turbine Pinned Root Control Stage Blades A.J.
Partington 227
IFToMM 1982 3.3 Vibrations of Blades with Damping Wire M. Butkovic 237
IFToMM 1982 3.4 Effect of Packeting on Turbine Blades Vibrations R. Bernante, A. Macchi and P.
Magneschi 247
IFToMM 1982 3.5 Forced Vibrations on Rotating Pretwisted Blades H.M. Jadvani and J.S. Rao 259
IFToMM 1982 3.6 Hydraulic Analogy for Non Ideal Compressible Gas Flow J.S. Rao, V. V.R. Rao and
V. Seshadri 267
IFToMM 1982 3.7 Blade Excitation Due to Gyroscopic Forces F. Sisto, A. T. Chang and M. Sutcu

www.rotordynamics.org/paperlists/IFTOMM.html 2/95
19:00, 30/11/2022 IFTOMM

279
IFToMM 1982 4.1 Balancing Experiences on Large Electric Machinery for The Production of
Electric Energy A. Marchetti 285
IFToMM 1982 4.2 A Unified Approach to Balancing with Multiple Constraints E.S. Zorzi, J.C.
Giordano and G.C. Lee 297
IFToMM 1982 4.3 Comparison of Effectiveness of Several Balancing Methods for Flexible Rotors
Zhou Shixiang and N.F. Rieger 305
IFToMM 1982 4.4 Balancing of a Multi-Mass Flexible Rotor-Bearing System without Phase
Measurements E.J. Gunter, H. Springer and R.R. Humphris 317
IFToMM 1982 5.1 Condition Monitoring of Large Francis Turbines and Generators on Hydro
Power Stations J.R.F. Arruda, H.I. Weber and D.E. Zampieri 331
IFToMM 1982 5.2 An On-Line Computer System as an Aid to Solving Rotor Dynamic Problems A.
Curami, M. Gasparetto, V. Rognoni and F. Di Pasquantonio 337
IFToMM 1982 5.3 The Size of a Turbo-Generating Sets and Permissible Vibrations A. Vucetic, M.
Butkovic, I. Skrtic and C. Orcic 347
IFToMM 1982 6.1 Experimental Research on the Behaviour of Hydrodynamic Plain Seals by
Means of a Specific Testing Device M. Falco, G. Diana, G. Marenco, G. Mimmi and P. Saccenti 355
IFToMM 1982 6.2 Exciting Forces Due to Swirl-Typ Flow in Labyrinth Seals L Hauck 361
IFToMM 1982 6.3 Rotordynamic Moment Coefficients for Finite-Length Turbulent Seals D. Childs
371
IFToMM 1982 7.1 The Determination of Hydrodynamic Oil Film Forces by 1n-Situ Testing R.H.
Bannister and A.R. Tawfik 379
IFToMM 1982 7.2 1nfluence of Misalignment of Support Journal Bearings on Stability of Multi-
Rotor Systems T. Nasuda and Y. Hori 389
IFToMM 1982 7.3 Study of Some Effects of Hydrodynamic Bearings Non-Linear Behaviour on
Rotating Machine Operations A. Pons 397

www.rotordynamics.org/paperlists/IFTOMM.html 3/95
19:00, 30/11/2022 IFTOMM

IFToMM 1982 7.4 Non-Linear Effects in Tilting Pad Bearings N. Abdul- Wahed, D. Nicolas and M.T.
Pascal 407
IFToMM 1982 7.5 Operating Characteristics of Three-Lobe and Pressure Dam Bearings R.D. Flack
and P.E. Allaire 417
IFToMM 1982 8.1 Elastic Solution for Vibration Trouble on Vertical Pumps G. Marenco and L
Vergani 429
IFToMM 1982 8.2 Seismic Response of Vertical Shaft Pump 1ncluding 1nteraction between Shaft
and Pipe T. Shimogo, K. Yoshida and Y. Kazao 439
IFToMM 1982 8.3 Vibrations and Critical Speeds of Submersible Turbine Pumps T. Chalko and K.
Marynowski 449
IFToMM 1982 8.4 A Theoretical and Experimental 1nvestigation on the Dynamic Behaviour of an
Axial Pump N. Bachschmid, B. Pizzigoni, A. Chessa, C. Guzzo and A. Vallini 461
IFToMM 1982 8.5 Vibration Problems on Large Rotating Machinery: Some Cases Experienced in
ENEL Power Stations M. Cadeddu, C. Frigeri, E. Gadda and A. Clapis 469
IFToMM 1982 8.6 Analytical and Experimental Procedures for Rotordynamic Predictions during
Development of New Turbomachines E. Benvenuti and P. Lacitignola 479
IFToMM 1982 8.7 Vibration Phenomena in Boiler FeedPumps Originating from Fluid Forces R.D.
Brown 497
IFToMM 1982 9.1 Theoretical and Experimental Investigation of Shaft Vibrations in
Turbomachinery Excited by Cracks B. Grabowski and O. Mahrenholtz 507
IFToMM 1982 9.2 On the Vibration Behaviour of a Cracked Rotor LR.K. Nilsson 515
IFToMM 1986 The Calculation of the Stiffness and Damping Coefficients of Turbine Journal
Bearings Considering Variable Viscosity H. Ott, G. Paradissiadis 1
IFToMM 1986 Analysis of Dynamic Characteristics for Cylindrical Journal Bearing Based on
Average Flow Theory K. Ono, S. Michimura, A. Tamura 7
IFToMM 1986 The Lubrication of Multiple Ring Journal Bearing A.E. Yousif 15

www.rotordynamics.org/paperlists/IFTOMM.html 4/95
19:00, 30/11/2022 IFTOMM

IFToMM 1986 Dynamically Loaded Finite Length Journal Bearings with Bending of the Journal
within the Bearing A.J. Smalley 21
IFToMM 1986 Study on Dynamic Characteristics of Flexible Cylindrical Journal Bearing K. Ono, S.
Michimura 29
IFToMM 1986 A Study on the Dynamic Characteristics of Swing Pad Journal Bearings Applied to a
Vertical Shaft K. Iwamoto, Y. Hori 37
IFToMM 1986 A Study on the Hybrid Bearing Characteristics for Large Pumps Y. Ozawa, H. Kanki,
T. Kawakami 43
IFToMM 1986 A Study of Aerostatically Lubricated Bearings with Groove Compensation G. Lin, T.
Aoyama, I. Inasaki 49
IFToMM 1986 A Journal Bearing Test Rig for Temperature and Pressure Measurements with
Results for an Offset Half Bearing L.J. Read, R.D. Flack 55
IFToMM 1986 Application of Random Excitation Technique to Dynamic Characteristics
Measurement of Bearing C. Yasuda, H. Kanki, Y. Ozawa, T. Kawakami 61
IFToMM 1986 A Method of Identifying Bearing Dynamic Coefficients and Unbalances of Turbine
Rotor S.B. Xia, W.H. Huang, Z.G. Li 69
IFToMM 1986 A Site Test of the Dynamic Characteristics of Fluid Film Bearings on a Running
Power Turbine Set H. Gong, H. Chang, C. Chang, D. Jin, D. Jin 75
IFToMM 1986 The Singularity of the Riccati Transfer Matrix Method and a Method for Its Being
Eliminated Z. Wang 81
IFToMM 1986 A 3-Dimensional Approach to Dynamic Analysis of Rotating Shaft-Disk Flexible
Systems M. Geradin, N. Kill 87
IFToMM 1986 Development of a Geometrically Non-Linear Timoshenko Beam Model for
Application in Rotor Dynamics T.A.G. Heeren, A. de Kraker, M.T.M. Crooijimans, D.H. van Campen
95
IFToMM 1986 The Effect of Earth Rotation on the Dynamics of High-Speed Vertically Mounted

www.rotordynamics.org/paperlists/IFTOMM.html 5/95
19:00, 30/11/2022 IFTOMM

Discs M.N. Sahinkaya, C.R. Burrows 101

IFToMM 1986 Mechanics of Dynamically Tuned Gyro D.M. Klimov 105
IFToMM 1986 The Role of Rigid Body Balancing for Flexible Shafts A.G. Parkinson 109
IFToMM 1986 A Method for Calculating the Optimum Balance Corrections of Flexible Rotors D.
Jin, X. Tang 173
IFToMM 1986 Balancing of a Flexible Rotor with High Speed and the Related Measurement
Technique Y. Nie, H. Zhao 117
IFToMM 1986 Adaptively Computer Controlled Fully Automatic Balancing System H. Kaliszer, M.
Abdulwahab 123
IFToMM 1986 Dynamic Balancing of Hydroelectric Generating Sets S.X. Jiang, Q.Y. Gong 129
IFToMM 1986 Field Balancing 70 MW Gas Turbine-Generators E.J. Gunter, W.E. Gunter 135
IFToMM 1986 Computer Simulation of Torsional and Flexural Vibrations in Machinery C. Troeder,
A. Laschet 145
IFToMM 1986 A New Approach to Describe the Mechanical Performance of Flexible Couplings in
Drive System H. Peeken, C. Troeder, J. Benner, W. Platt 159
IFToMM 1986 High Speed Rolling Piston Rotary Compressor Development (Analysis on Bearing
Load Caused by Unbalanced Force in Overhung Flexible Rotor System) M. Kubo, N. Kawashima,
H. Marumo 165
IFToMM 1986 Three Dimensional Stress Analysis on Rotor Shaft with Ribs under Dynamic Load K.
Sonoda, N. Yamashita, H. Kanzaki, T. Uchida, T. Murakami, K. Ishihara 171
IFToMM 1986 Composite Flywheel Optimization A.P. Bessonov, M.Y. Ochan 177
IFToMM 1986 Balancing of Flexible Rotor by Modal Parameter Identification Y. Kanemitsu 183
IFToMM 1986 Identification of the Modal Parameters by Perturbation Testing of a Rotor with
Strong Gyroscopic Effect D.E. Bently, A. Muszynska, A. Olas 189
IFToMM 1986 Measurement of Rotational Vibration of Gears Using Double Aperture Method I.
Hayashi, T. Hayashi, S. Ueha, T. Honda 195

www.rotordynamics.org/paperlists/IFTOMM.html 6/95
19:00, 30/11/2022 IFTOMM

IFToMM 1986 Algebraic Formulas for the Threshold and Mode of Instability and the First Critical
Speed of a Simple Flexibly Supported (Overhung) Rotor-Bearing System E.A. Muijderman 201
IFToMM 1986 Sub-Synchronous Limit Cycles for a Flexible Shaft in Lobed Hydrodynamic Bearings
R.D. Brown 211
IFToMM 1986 An Approximate Nonlinear Transient Analysis of Journal Bearing Response in
Unstable Region of Linearized System M. Malik, y. Hori 217
IFToMM 1986 Solving Nonsynchronous Vibration Problems of Large Rotating Machineries by
Exciting Test in Actual Operating Condition H. Kanki, H. Fujii, A. Hizume, T. Ichimura, T. Yamamoto
221
IFToMM 1986 Vibrational Characteristics of a Rotor Shaft of an Electric Motor for Downhole
Pump Y. Hori, T. Kato, Y. Nishimura, S. Konomoto 227
IFToMM 1986 Multiple Pad Pressure Dam Journal Bearings Analysis and Application to Vertical
Machines P.E. Allaire, T. Okita 233
IFToMM 1986 Machine Dynamics in Terms of the System Configuration Parameters Z.A.
Parszewski, J.M. Krodkiewski 239
IFToMM 1986 An Experimental Study of Squeeze Film Damper Bearing without Centralizing
Spring M. Tanaka, Y. Hori 245
IFToMM 1986 The Unbalance Responses of a Rigid Rotor Supported in Squeeze-Film Damper
Bearings J.K. Xu, S.Q. Chen 251
IFToMM 1986 Vibration Control Capability of Squeeze-Film Bearings F. Kaya 257
IFToMM 1986 Rotor-Foundation (or Casing) Dynamics and Evaluation T. Inagaki, K. Shiraki 263
IFToMM 1986 Experimental and Numerical Analysis on a Large Nuclear Steam Turbo-Generator
Group A. Pons 269
IFToMM 1986 The Disturbing Force and Moment Analysis and Dynamic Response Calculation for
Die Forging Press-Elastic Foundation System S. Liu, Y. Dai, S. Gu, W. Yao 277
IFToMM 1986 Dynamic Analysis of Press-Elastic Foundation System Using Component Mode

www.rotordynamics.org/paperlists/IFTOMM.html 7/95
19:00, 30/11/2022 IFTOMM

Synthesis S. Liu, S. Gu, Y. Dai 283

IFToMM 1986 Analytical and Experimental Investigations on Vibratory Stresses of a Rotating
Steam Turbine Blade under NPF Excitation J.S. Rao, K. Gupta, N.S. Vyas 289
IFToMM 1986 Transient Vibrations of Turbine Blades due to Passage through Partial Admission
and Nozzle Excitation Resonances H. Irretier 301
IFToMM 1986 Study on Aerodynamic Force Exciting Vibration of Turbine Rotor Blade M. Tanaka,
A. Takehira, K. Kuwata, A. Hoshino, H. Koike, K. Ishihara, T. Isozaki, H. Yamasaki 307
IFToMM 1986 Impeller Blade Vibration in Turbochargers N. Nishiwaki, K. Kimura, S. Shiratori 313
IFToMM 1986 Startup Torsional Vibration of Rotating Machine Driven by Synchronous Motor T.
Iwatsubo, Y. Yamanoto, R. Kawai 319
IFToMM 1986 Torsional System Design Relative to Synchronous Motor Start-up with a Variable
Frequency Power Supply System P. deChoudhury 325
IFToMM 1986 Improvement of a Reduced Torsional Model by Means of Parameter Identification
P. Schwibinger, T. Feng, R. Nordmann 329
IFToMM 1986 Quick Predictions of Drive Conditions for Torsional Systems B. Weyh 339
IFToMM 1986 Analysis of Single Rotor Turbines by Means of Torsional Waves A. Mioduchowski,
M.G. Faulkner 345
IFToMM 1986 Noise of Lightly Loaded Spur Gears I. Hayashi, T. Hayashi 349
IFToMM 1986 In-Plane Circumferential Vibrations of Rotating Discs S. Amada 355
IFToMM 1986 Turbine Generator Vibration Monitoring in the CEGB D.L. Thomas 361
IFToMM 1986 A Diagnostic System to Define Malfunctioning Conditions of A Turbogenerator G.
Diana, M. Gasparetto, F. Cheli, A. Manenti, A. Manenti 367
IFToMM 1986 An On-Line Computer System for Phase-Angle Monitoring in Turbogenerator J.H.
Wang 373
IFToMM 1986 Identification of Fractures in Rotors M.R. Kujath 379
IFToMM 1986 An On-Line Crack Detection Method for Turbogenerator Rotors G. Diana, N.

www.rotordynamics.org/paperlists/IFTOMM.html 8/95
19:00, 30/11/2022 IFTOMM

Bachschmid, F. Angeli 385

IFToMM 1986 Fault Diagnosis in Rotating Machinery M.F. White 391
IFToMM 1986 A Study on Ball Bearing Fault Diagnosis by Cepstral Analysis J-E. Oh, E-S. Yoon, S-H.
Yum, O-K. Kwon 397
IFToMM 1986 An Investigation of the Early Detection of Defects in Ball Bearings Using Vibration
Monitoring -- Practical Limit of Detectability and Growth Speed of Defects T. Miyachi, K. Seki 403
IFToMM 1986 Hilbert Transform Techniques in Machine Diagnostics R.B. Randall 409
IFToMM 1986 Digital Control of Electro-Magnetic Damper for Rotating Machinery B. Nagai, Y.
Okada, K. Matsuda, K. Kibune 415
IFToMM 1986 Flexible Rotor Vibration Analysis Combined with Active Magnetic Bearing Control
O. Matsushita, M. Takagi, N. Tsumaki, M. Yoneyama, T. Sugaya, H. Bleuler 421
IFToMM 1986 Quasi-Modal Vibration Control by Means of Active Control Bearings K. Nonami, D.P.
Fleming 429
IFToMM 1986 On the Active Control of Rotors with Uncertain Parameters P. Hagedorn, K. Kelkel,
U. Weltin 437
IFToMM 1986 Automatic Control of the Vibration of the Flexible Rotor with Microcomputer G-P.
Feng, N. Xin 443
IFToMM 1986 Whirling of a Flexible Cylinder Filled with Liquid S.H. Crandall, J. Mroszcyk 449
IFToMM 1986 Vibration of Rotor Containing Liquid T. Shimogo, K. Yoshida, M. Kumagai, Y. Kazao
453
IFToMM 1986 Unstable Vibration of a Truncated Conical Rotor with 16 Spiral Fins Partially
Immersed in Water F. Hara 459
IFToMM 1986 Curing Self-Excited Vibrations in a Super-Critical Shaft D. Thelen, A. Giers 467
IFToMM 1986 Self-Excited Vibrations of a Rotating Shaft Internal Friction H. Ota, K. Mizutani 475
IFToMM 1986 On the Rubbing Phenomena in Turbomachinery A. Curami, B. Pizzigoni, A. Vania
481

www.rotordynamics.org/paperlists/IFTOMM.html 9/95
19:00, 30/11/2022 IFTOMM

IFToMM 1986 Destabilization of Rotors from Friction in Internal Joints with Micro-Slip J.W. Lund
487
IFToMM 1986 Unstable and Forced Vibrations of an Asymmetrical Shaft Driven by a Universal
Joint H. Ota, M. Kato 493
IFToMM 1986 Lateral Vibration of Rotating Body Driven through Constant-Velocity Joints M.
Saigo, T. Iwatsubo 499
IFToMM 1986 Investigations and Preventions of Self Excited Torsional Vibrations of Rotating
Shafts due to Slipping Clutch S. Yanabe, A. Okada, N. Yamagishi, A. Tonegawa, S. Ogawa, T. Li 505
IFToMM 1986 Some Theoretical Analyses on Flexible Rotor--Squeeze Film Damper Bearings
System and Fluid Film Forces G. Meng, Z.Q. Xue 511
IFToMM 1986 System Vibrations: Rotor with Self Excited Support J. Awrejcewicz 517
IFToMM 1986 Approximate Computation of Unbalance Vibrations of Multi-Bearing Rotors E.
Kramer 523
IFToMM 1986 Influence of Slide Bearings and Support Dynamics in Rotor Dynamics H.F.
Schwaberger, W.J. Keusch 529
IFToMM 1986 Influence of Damped and Flexible Pedestals on the Dynamic Response of Flexible
Rotors on Fluid Film Bearings K.S. Ramakrishnan, B.S. Prabhu, B.V.A Rao 535
IFToMM 1986 Transient Vibration of Bladed Flexible Rotor due to Sudden Imbalance M. Sakata, K.
Kimura, H. Takahara, H. Ohnabe 541
IFToMM 1986 Dynamics of Textile Spinning Spindles and Rotors A. Kahraman, M. Caliskan, H.N.
Ozguven 547
IFToMM 1986 Computer Study of Radial Vibrations in a Rotor / Ball Bearing System H. Tamura,
E.H. Gad, A. Sueoka 553
IFToMM 1986 A Computer Program for Determination of the Natural Frequencies of Multilayer
Shells L. Papa 561
IFToMM 1986 Mechanical Model Study for Shrink Fit Rotor W. Zhang, S. Xia, F. Chen, H. Song, H.

www.rotordynamics.org/paperlists/IFTOMM.html 10/95
19:00, 30/11/2022 IFTOMM

Song 567
IFToMM 1986 On a Nature and Some Properties of Insensitive Speeds of a flexible Rotor A.A
Gusarov 571
IFToMM 1986 Dynamic Characteristics of the Rotors with Axial Vibration B.C. Wen, W.Y. Wu, D.J.
Liu 577
IFToMM 1986 Degeneration of the Free Vibration Frequency of the Crafts Loaded by Torsional
Moment A.J. Poplawski 583
IFToMM 1986 Labyrinth Seal Analysis for Centrifugal Compressor Design -- Theory and Practice
R.G. Kirk 589
IFToMM 1986 A Theoretical Approach to Labyrinth Seal Forces -- Lateral Forces of the Labyrinth
Seal on a Whirling Rotor T. Kameoka, M. Kurohashi, T. Fujikawa, T. Abe 597
IFToMM 1986 Theoretical and Experimental Study on the Destabilizing Forces by Labyrinth Seal
H. Kanki, S. Morii, A. Hizume 603
IFToMM 1986 Testing for Rotordynamic Coefficients and Leakage : Circumferentially-grooved
Turbulent Annular Seals D.W. Childs, C.H. Kim 609
IFToMM 1986 Rotordynamic Coefficients and Leakage Flow for Smooth and Grooved Seals in
Turbopumps R. Nordmann, F.J. Dietzen, W. Janson, A. Frei, A. Frei 619
IFToMM 1986 The Effects of Surface Waviness and Roughness on Seal Dynamics T. Iwatsubo, B-S.
Yang 629
IFToMM 1986 Steam Excited Vibration in Rotor-Bearing System S. Hisa, H. Sakakida, A. Asatu, T.
Sakamoto 635
IFToMM 1986 Fluid Force Testing Machine for Whirling Centrifugal Impeller H. Ohashi, R.
Hatanaka, A. Sakurai 643
IFToMM 1986 Fluid Effects on Rotor Dynamics of Hydraulic Turbomachines R. Liebe 649
IFToMM 1986 Effects of Seals on Rotor Dynamics M. Falco, G. Mimmi, G. Marenco 655
IFToMM 1986 Effect of the Fluid Film Seals on the Stability of Turbocompressor Rotor M. Tanaka,

www.rotordynamics.org/paperlists/IFTOMM.html 11/95
19:00, 30/11/2022 IFTOMM

S. Sugimura, J. Mitsui, A. Nishidoi 663

IFToMM 1990 Rotor instability due to leakage flow induced pressure acting on the rotor disc A
Tondl 3
IFToMM 1990 Stability of periodic torsional vibrations in turbine-generator rotors G Toth 9
IFToMM 1990 Experimental investigation of reverse whirl of a flexible rotor A Lingener 13
IFToMM 1990 Form whirl to whip in rotordynamics S H Crandall 19
IFToMM 1990 Validation of rotor-dynamic models using dynamic testing R L Eschleman, K R Guy
27
IFToMM 1990 A method to improve the accuracy of experimental models for the dynamic testing
of turbogenerators P S Leung, I A Craighean, T S Wilkinson 33
IFToMM 1990 Mechanical model study for tie rod fastening rotor system S Xia, W Zhang, Z Rao, F
Chen, X Li, G Wang 39
IFToMM 1990 Iterative techniques for the computation of the unbalance response of multi
degrees of freedom nonlinear rotors G Genta, A Repaci, I Briacca 45
IFToMM 1990 Parameter optimization for the dynamics of rotating machinery W Diewald, R
Nordmann 51
IFToMM 1990 Application of optimization techniques for hypercritical rotors D Doizelet, D
Bondoux 57
IFToMM 1990 Analytical and experimental research on some typical non-linear effects in the
frequency response of a rotor on lubricated bearings G Diana, F Cheli, A Manenti, F Petrone 65
IFToMM 1990 The design and application of a bearing test rig for dynamic coefficients G J
Kostrzewsky, D V Taylor, R D Flack 73
IFToMM 1990 Oil Pressure-Supply-Outlet influence on bearing characteristics Z A Parszewski, J M
Krodkiewski, D-X Li 79
IFToMM 1990 A method for measuring oil film coefficients of journal bearings S Yanabe, S
Yamashita, B Weyh 85

www.rotordynamics.org/paperlists/IFTOMM.html 12/95
19:00, 30/11/2022 IFTOMM

IFToMM 1990 Stability characteristics of worn journal bearings M Tanaka, Y Hori 93

IFToMM 1990 Floating bush aerostatic journal bearings employing slot restrictors S Yoshimoto, Y
Anno, T Iiya 99
IFToMM 1990 Oil film and vibration characteristics of offset-halves journal bearing I Matsumoto, J
Esaki, T Furukawa, S Taniguchi 105
IFToMM 1990 Experimental analysis on non linear response of flexible rotor supported on
uncentralised squeeze film dampers M Guang 113
IFToMM 1990 The behaviors of resonant bistable operation in flexible rotor-squeeze film damper
systems C Zhu, X Feng, J Xu, C Fu 119
IFToMM 1990 Dynamic characteristics of a centralised squeeze film damper A Kassai, J Der
Hagopian, M Lalanne, D F Thomas 125
IFToMM 1990 Investigation of travelling wave vibration for bladed disk in Turbomachinery L-T
Yan, Q-H Li 133
IFToMM 1990 Vibration behaviour of laced turbocharger blading G M Chapman, W Xu 137
IFToMM 1990 Vibrations of bladed disks and their elements including interblading bonds and
mistuning Y Vorobiev, M L Korsunsky, A I Shepel 143
IFToMM 1990 The optimal distribution of the detuned blades around the disk from the stress
point of view R Rzadkowski 147
IFToMM 1990 Vibration analysis of a rotating orthotropic composite blade with an open crack by
the finite element method L-W Chen, G-S Shen 155
IFToMM 1990 On the extension of the analytical solution of the transient excited vibrations of a
SDOF-system on the run-up and run-down of turbine blades H Irretier 161
IFToMM 1990 Flutter analysis of plate-like rotating blades G Jacquet-Richardet, R Henry 171
IFToMM 1990 Material damping of a prestressed beam R Hinrichs, O Marhenholts 179
IFToMM 1990 Interface damping in blade attachment region J S Rao, M A W Usmani, C V
Ramakrishnan 185

www.rotordynamics.org/paperlists/IFTOMM.html 13/95
19:00, 30/11/2022 IFTOMM

IFToMM 1990 Damping properties of steam turbine blades N F Rieger, T H McCloskey 191
IFToMM 1990 Analysis of transient torsional vibrations in the rotor machine using a hybrid
model R Bogacz, H Irretier, T Szolc 207
IFToMM 1990 Dynamic response of a rotor-foundation-soil system considering the effects of an
active or passive environment E de Mesquita Neto 213
IFToMM 1990 Eccentricity and meshing contributions to the dynamic tooth loading on geared
trains P Velex, D Berthe 219
IFToMM 1990 The low frequency content of the fluctuating forces induced by gear faults on
geared rotors Ph Briere, J Sabot 225
IFToMM 1990 Instability of a rotor filled with liquid S Morishita 233
IFToMM 1990 Thermal bow in an axisymmetrical shaft containing a transverse notch and related
vibrational behaviour N Bachschmid, D Del Vescovo 239
IFToMM 1990 An examination of errors in modified hydraulic analogy in the presence of normal
and oblique shocks J S Rao 245
IFToMM 1990 Vibrating response to the errors in manufacturing and assembling of rigid coupling
D Jin, L Zhang, L Ji, W D Pilkey 251
IFToMM 1990 Balancing of highly flexible shaft lines on their critical bending speeds R Chevalier
257
IFToMM 1990 Real time balancing of a flexible rotor supported by magnetic bearing Y Kanemitsu,
M Ohsawa, K Watanabe 263
IFToMM 1990 New methods of Francis runner balancing A Bolotnikov 269
IFToMM 1990 Squeeze film damper as an application of electro-rheological fluid S Morishita, J
Mitsui 277
IFToMM 1990 Development of porous squeeze film damper bearings for improving the blade
loss dynamics of rotor-support systems S Zhang, L Yan, Q Li 283
IFToMM 1990 A study of non-newtonian viscosity effects on the offset circular orbit squeeze-film

www.rotordynamics.org/paperlists/IFTOMM.html 14/95
19:00, 30/11/2022 IFTOMM

damper Z-Q Xue, G Meng 289

IFToMM 1990 Study of a squeeze film damper with an axial controlled flow O Bonneau, J Frene
295
IFToMM 1990 Annular honeycomb seals: additional test results for leakage and rotordynamics
coefficients D Childs, D Elrod, C Ramsey 303
IFToMM 1990 An experimental study on the static and dynamic characteristics of damper seals T
Iwatsibo, B C Sheng 307
IFToMM 1990 Evaluation of dynamic characteristics of parallel grooved seals by theory and
experiment T Iwatsibo, B C Sheng 313
IFToMM 1990 Experimental evaluation of holding forces in floating ring seals R G Kirk, D B
Browne 319
IFToMM 1990 A feasibility and technology assessment for the implementation of active rotor
vibration control systems M L Adams, T H McCloskey 327
IFToMM 1990 Active chamber system for control of rotordynamics. Theory and experiment J
Althaus, H Ulbrich, T Jager 333
IFToMM 1990 Active control of vibrations of rotor-support systems by the controlled squeeze
film damping bearings J Gu, X Ren 339
IFToMM 1990 Dynamic analysis of the large rotor-foundation-soil system Z-C Zhang, N-P Wu 347
IFToMM 1990 Rotordynamics of the Vulcain LH2 turbopump. Comparison between test results
and dynamic analysis C Brune, F Lassoudiere 353
IFToMM 1990 The dynamic interaction of the turboset with the foundation J Smejkal 361
IFToMM 1990 Characterizing the influence of the structure connection dampings on dynamical
rotor behavior B Vinsonneau, F Lemant 367
IFToMM 1990 Fluid induced rotor vibrations in decanter centrifuges J Colding-Jorgensen 375
IFToMM 1990 The effect of oil filled bolster on textile spindle dynamics U Degirmenci, M Akkok,
M Caliskan 383

www.rotordynamics.org/paperlists/IFTOMM.html 15/95
19:00, 30/11/2022 IFTOMM

IFToMM 1990 Analysis of the causes of vibration level increase in dual cement mill bearings and
foundation S Gajin, R Folic, G Varju 389
IFToMM 1990 Dynamic analysis of aircraft engines subjected to maneuvers M Gerardin, N Kill
397
IFToMM 1990 Experimental and theoretical dynamic analysis of a rotating shrouded impeller A
Berlioz, R Henry, J M Pugnet, G Ferraris 403
IFToMM 1990 A steam turbine rotor remaining life estimation with deterministic and
probabilistic fracture analysis using the SAFER computer code G T Cunningham, R A Smoak 411
IFToMM 1990 Identification of mechanical systems by means of the extended Kalman filter C P
Fritzen, S Seibold 423
IFToMM 1990 Parameter estimation and model updating of rotor-bearing systems by the direct
curve-fit of frequency response functions J R F Arruda, M V M Duarte 431
IFToMM 1990 Modal parameter identification by impact excitation tests of rotor supported in oil-
film bearings J Tonnesen, J W Lund 437
IFToMM 1990 Identification of journal bearing stiffness and damping coefficients by extended
Kalman filter Z Y Mohammad, J S Burdess 445
IFToMM 1990 Diagnosis of malfunctions in large turbine-generators: some case histories M
Cappelli, G Diana, G L Lapini, A Vallini 455
IFToMM 1990 Application of phase angles to fault diagnosis G Yue, L Yan, Q Li 461
IFToMM 1990 The application of pattern recognition technique in fault diagnosis of machinery
equipment Y Yan, T Shimogo 467
IFToMM 1990 The application of Haar transform in signature extraction and condition
monitoring of mechanical system Y Yan, T Shimogo 473
IFToMM 1990 Alleviation of vibration by bearing layout redesign K Krynisky 477
IFToMM 1990 Monitoring of torque variation of rotating systems with an Induction motor T
Shimogo, A Motoya, T Ono, Y Miyata 483

www.rotordynamics.org/paperlists/IFTOMM.html 16/95
19:00, 30/11/2022 IFTOMM

IFToMM 1990 New concepts for contact-free support of industrial high speed rotors H Bleuler, H
Bernhardt 491
IFToMM 1990 Non linear hysteresis effects in electromagnetic bearings H Springer, E H Malsen, R
R Humphris 497
IFToMM 1990 Dynamic behavior of flexible rotors with active magnetic bearings on safety
auxiliary bearings A Gelin, J J M Pugnet, D Hagopian 503
IFToMM 1990 A high speed rotor in active magnetic bearings R Larsonneur 509
IFToMM 1990 Control of rotor vibration due to cross stiffness effect of active magnetic bearing O
Matsushita, M Tagaki, M Yoneyama, T Yoshida, I Saitoh 515
IFToMM 1990 An analytical solution for the forced vibration response of tuned bladed disk
assemblies K Y Sanliturk, M Iremgun, D J Ewins 523
IFToMM 1990 Experimental investigation of bladed disk vibrations L Pust 529
IFToMM 1990 Design of blade-shroud to minimize the sensitivity of response to preload
mistuning J H Wang, H L Yau 535
IFToMM 1990 Unstable vibration of a single rotating disk in a confined fluid F Hara 543
IFToMM 1990 Supercritical behaviour of rotating disc. S G Hutton, L Yang 549
IFToMM 1990 The experimental analysis for lateral vibration characteristics of disk-shaped bevel
gear Q Li 553
IFToMM 1990 Modelling and estimation of hydroelectric machinery A Sperber, H I Weber 559
IFToMM 1990 Self excited natural vibrations of a turbogenerator set and their elimination C
Besigk, W Blank, G Ohlmann, P Shulz 565
IFToMM 1990 Seismic and shock response of a rotor on hydrodynamic bearings S Edney, C H J
Fox, E J Williams 571
IFToMM 1990 Analytical and experimental rotordynamic predictions during prototype
development of a turbocharger P S K Rangan, C Haridas, R Padmanabhan, B S Prabhu 577
IFToMM 1990 Tilt pad seal and damper bearing applications to high speed and high density

www.rotordynamics.org/paperlists/IFTOMM.html 17/95
19:00, 30/11/2022 IFTOMM

centrifugal compressors E A Memmott 585

IFToMM 1990 Failure detection in heavy machinery using process and vibration signals and
extraction of characteristics C Troeder, A Laschet 591
IFToMM 1990 An on line application of a turbomachinery supervisory system A Curami, M
Gasparetto, A Vania 597
IFToMM 1990 Managing influence coefficients for turbomachinery balancing: the use of
regression techniques A J Smalley 605
IFToMM 1990 Reduction of pump vibration applying modal balancing of hydraulic excitation H
Kanki, T Kawakami 611
IFToMM 1990 Identification and balancing of flexible rotors V P Roizman, V A Dubrovsky 617
IFToMM 1994 ROTORDYNAMIC RESPONSE IN NONLINEAR ANISOTROPIC MOUNTING SYSTEMS
F.F. Ehrich 1
IFToMM 1994 PARAMETER IDENTIFICATION IN ROTATING MACHINERY BY MEANS OF MAGNETIC
BEARINGS R. Nordmann, M. Matros, and T. Neumer 7
IFToMM 1994 MODERN TECHNOLOGY DEVELOPMENTS FOR STEAM AND GAS TURBINE BLADING
Neville F. Rieger 17
IFToMM 1994 DIAGNOSTICS OF PLANETARY BEARINGS Robert B. Randall 25
IFToMM 1994 EXPLORATORY RESEARCH ON CHAOS CONCEPTS AS DIAGNOSTIC TOOLS FOR
ASSESSING ROTATING MACHINERY VIBRATION SIGNATURES M.L. Adams and I.A. Abu-Mahfouz 29
IFToMM 1994 ANALYSIS OF RUBBING IN A VERTICAL ROTOR WITH OBSERVATION OF CHAOTIC
MOTION Humberto Camargo Piccoli and Hans Ingo Weber 41
IFToMM 1994 VIBRATIONS OF A ROTATING SHAFT CONTAINING A TRANSVERSE CRACK (MA JOR
CRITICAL SPEED OF A HORIZONTAL SHAFT) Yukio Ishida, Toshio Yamamoto, Kazuharu Hirokawa
47
IFToMM 1994 FORCED VIBRATION OF MISTUNED BLADED DISCS IN STATIONARY OPERATIONS H.
Irretier, Romuald Rzadkowski 53

www.rotordynamics.org/paperlists/IFTOMM.html 18/95
19:00, 30/11/2022 IFTOMM

IFToMM 1994 ANALYTICAL AND EXPERIMENTAL INVESTIGATION OF BLADED?

DISK/SHAFTCOUPLED SYSTEM Wen Zhang, Wenliang Wang, Hao Wang, and Jiong Tang 63
IFToMM 1994 DYNAMIC BEHAVIOR OF FLUID IMMERSED ROTATIONALLY PERIODIC STRUCTURES
APPLICATION TO A SHIP PROPELLER Christian Dal-Ferro, Georges Jacquet-Richardet, and Remy
Henry 69
IFToMM 1994 HOPF BIFURCATION IN A NONLINEAR ROTOR SYSTEM SUBJECTED TO A FOLLOWER
FORCE Krzysztof Marynowski and Krzysztof Czolcznski 75
IFToMM 1994 TURBOFAN BLADE LOSS DESIGN TOOLS Peter D. Hylton and Donald W. Bums 81
IFToMM 1994 DYNAMICS OF A ROTOR WITH ANNULAR RUB John L. Isaksson 85
IFToMM 1994 CHAOTIC RESPONSE OF ROTOR/SATOR RUBS Wei Yang and Xikuan Tang 91
IFToMM 1994 USE OF DIRECTIONAL SEPCTRA FOR DIAGNOSIS OF ASYMMETRY/ANISOTROPY IN
ROTOR SYSTEMS Chong-Won Lee and Chee-Young Joh 97
IFToMM 1994 MODEL IDENTIFICATION IN COMPUTER-CONTROLLED MONITORING OF
ROTORMACHINERY A. Curami and A. Vania 103
IFToMM 1994 APPLICATION OF THE EXPERIMENTAL DETERMINATION OF CHARACTER MATRICES
TO THE BALANCING OF A FLEXIBLE ROTOR Hiroshi Iida 111
IFToMM 1994 IDENTIFICATION WITH SIMPLE MODELS OF THE MODE SHAPES AND UNBALANCES
OF ROTOR SYSTEMS FROM BEARING MEASUREMENTS N. Bachschmid, R. Bemante, S. Bruni and
A. Collina 117
IFToMM 1994 DYNAMIC BEHAVIOUR OF ELECTRIC MOTORS FOR MARINE AND NAVAL
APPLICATIONS G. Diana, B. Pizzigoni, and C. Gorla 123
IFToMM 1994 CONTRIBUTION OF SPECTRAL ANALYSIS FOR INTERPRETING VULCAIN HYDROGEN
TURBOPUMP ROTORDYNAMICS TEST RESULTS C. Brune, A. L. Mertz 129
IFToMM 1994 CALCULATING VANE-PASS FREQUENCIES William C. Foiles 137
IFToMM 1994 IDENTIFICATION AND RESOLUTION OF AERODYNAMICALLY INDUCED
SUBSYNCHRONOUS VIBRATION DURING HYDROCARBON TESTING OF A 34,000 HP CENTRIFUGAL

www.rotordynamics.org/paperlists/IFTOMM.html 19/95
19:00, 30/11/2022 IFTOMM

COMPRESSOR M. J. Kuzdzal, J. F. Hustak, and J. M. Sorokes 143

IFToMM 1994 ANNUALR PUMP SEALS AND ROTORDYAMICS Dara Childs 153
IFToMM 1994 PRACTICAL ROTOR DYNAMICS GIVES INSIGHT TO DIAGNOSTICS, BALANCING,
CORRECTIONS Charles Jackson 163
IFToMM 1994 MODELING, ANALYSIS AND COMPUTATION IN ROTORDYAMICS: A HISTORICAL
PERSPECTIVE H. D. Nelson 171
IFToMM 1994 VIBRATION OF TURBINE ROTOR SHAFT SUPPORTED BY VERTICALLY POSITIONED
TWO-LOBE JOURNAL BEARINGS Iwao Matsumoto, Toyoaki Furukawa, and Jinro Esaki, Yukihiko
Inoue 179
IFToMM 1994 ANALYSIS AND DESIGN OF FLOATING OIL RING SEALS FOR CENTRIFUGAL
COMPRESSORS R. Gordon Kirk 185
IFToMM 1994 THE DYNAMIC FORCES OF PUMP ANNULAR SEALS THROUGH TWO PHASE FLOW T.
Iwatsubo and T. Nishino 191
IFToMM 1994 VIBRATION ANALYSIS FOR DETECTION OF GEAR FAULTS WITHIN GEARBOX,
APPLICATION TO SPUR AND HELICAL GEARS M. Alattass, J. Mahfoudh, and D. Play 197
IFToMM 1994 MODELING AND ANALYSIS OF GEARED ROTORDYNAMIC SYSTEMS C. S. Chen, and
S. Natsiavas, H. D. Nelson 205
IFToMM 1994 A MATRIX ASSEMBLY TECHNIQUE TO CALCULATE EPICYLIC GEAR FREQUENCIES
William C. Foiles 213
IFToMM 1994 FLEXIBILITY ENHANCED QUASI-STATIC ANALYSIS OF ROLLING ELEMENT BEARINGS
L. M. Greenhill, D. H. Merchant, S. G. Ryan 217
IFToMM 1994 A COMPLEX MODEL FOR LIGHTLY LOADED BEARINGS Huaping Mu, Chengsong
Chang, Xikuan Tang 225
IFToMM 1994 PROCESS-LIQUID TURBULENT-FLOW HYDROSTATIC BEARINGS: ANALYSIS AND
TESTS FOR ROTORDYNAMIC COEFFICIENTS Zhou Yang, Luis San Andres, and Dara W. Childs 233
IFToMM 1994 ABNORMAL VIBRATION AND SELF-CENTERING FUNCTION OF SUN GEAR SHAFT IN

www.rotordynamics.org/paperlists/IFTOMM.html 20/95
19:00, 30/11/2022 IFTOMM

PLANETARY GEAR TRAIN Shigeo Yanabe and Masanobu Yoshino 243

IFToMM 1994 AN INFLUENCE OF GEAR TEETH IMPACTS ON TORSIONAL VIBRATIONS OF A
DISCRETE CONTINUOUS MODEL OF THE DRIVE SYSTEM Tomasz Szolc and Roman Bogacz 249
IFToMM 1994 EIGENSOLUTION OF ROTARYWING SYSTEM Zhaochang Zheng and Gexue Ren 255
IFToMM 1994 A HYBRID METHOD FOR VIBRATION ANALYSIS OF ROTOR SYSTEMS Bo Suk Yang
261
IFToMM 1994 SIMULTANEOUS OPTIMUM DESIGN OF SHAFT CONFIGURATION AND DAMPER IN
TORSIONAL VIBRATION OF TURBOGENERATOR ROTOR SET T. Iwatsubo, K. Adachi, and S. Okada
269
IFToMM 1994 APPOXIMATE FORMULAS FOR THE MAXIMUM TRANSIENT RESONANCE RESPONSE
OF UNBALANCE-EXCITED ROTORS H. Irretier and F. Leul 275
IFToMM 1994 POST-STABILITY ATTENUATION OF ROTOR-BEARING SYSTEMS Krzysztof Krynicki,
Zdzislaw A. Parszewski 281
IFToMM 1994 DYNAMIC INSTABILITY OF COMPOSITE ROTORS Håkan L. Wettergren 287
IFToMM 1994 HIGH-SPEED BALANCING BY THE TWO-RUN TECHNIQUE Tang Bing Xin and Wen
Bang Chun 293
IFToMM 1994 RECENT ADVANCES IN THE STUDY OF OIL LUBRICATED JOURNAL BEARINGS P. G.
Morton 299
IFToMM 1994 INSIGHTS INTO THE STATIC AND DYNAMIC CHARACTERISTICS OF JOURNAL
BEARINGS A. El-Shafei 307
IFToMM 1994 APPLICATION OF MODAL METHODS IN ROTOR DYNAMICS Jorgen W. Lund 317
IFToMM 1994 DYNAMIC BEHAVIOR OF SYMMETRIC COAXIAL CO AND COUNTER-ROTATING
ROTORS APPLICATION TO A PROPFAN ENGINE Michel Lalanne and Guy Ferraris 321
IFToMM 1994 NUMERICAL STUDY OF A FLEXIBLE ROTOR MOUNTED IN AN ACTIVE SQUEEZE FILM
DAMPER Olivier Bonneau and Jean Frene 327
IFToMM 1994 FLUID INERTIA EFFECTS ON THE NON-LINEAR RESPONSE OF A RIGID ROTOR

www.rotordynamics.org/paperlists/IFTOMM.html 21/95
19:00, 30/11/2022 IFTOMM

SUPPORTED ON SQUEEZE-FILM DAMPERS Padmanabhan Sundararajan, Sherif T. Noah, and Luis

San Andres 333
IFToMM 1994 DEVELOPMENT OF AN ADVANCED HYBRID SQUEEZE FILM DAMPER FOR ROTOR
SYSTEM VIBRATION CONTROL Changsheng Zhu and Xixuan Wang 341
IFToMM 1994 ROTOR VIBRATION OF A STEAM TURBINE CAUSED BY NOZZLE EROSION H. Nomoto
and H. Sakakida 351
IFToMM 1994 DYNAMIC RESPONSE OF A ROTOR BEARING SYSTEM DUE TO BEARING FAILURE
Horst Ecker, Helmut Springer, and Hermann Haselbacher 357
IFToMM 1994 UNBALANCE RESONANCE VIBRATION CONTROL FOR MAGNETICALLY BORNE
FLEXIBLE ROTORS Osami Matsushita, Naohiko Takahashi, Mitsuho Yoneyama, and Yasuo
Fukushima 363
IFToMM 1994 STUDY ON VIBRATION RELIABILITY DESIGN FOR BEARING OF TURBINE-GENERATOR
SETS Jinyuan Shi, Hansheng Gong, and Zhenkun Lin 371
IFToMM 1998 Magnetic bearings as a component of smart rotating machinery G. Schweitzer 3
IFToMM 1998 Active vibration control of rotors H. Ulbrich 16
IFToMM 1998 Rotor vibration control using squeeze film dampers R. Holmes 32
IFToMM 1998 Recent results for honeycomb and hole pattern stator annular damper seals D. W.
Childs 52
IFToMM 1998 Rotordynamic problems experienced in actual machines M. Tanaka 68
IFToMM 1998 Some developments in machine condition monitoring R. B. Randall 83
IFToMM 1998 Prediction of damage accumulation in vibrating rotors M. Balda 101
IFToMM 1998 Detection of crack position and depth in rotating shafts I. Hachmann, K. Popp 113
IFToMM 1998 Determining location and extent of rotor damage M. Musil, L. Starek 125
IFToMM 1998 Computing critical speeds for rotating machines with speed dependent bearing
properties M. Friswell, M. Smart, S. Garvey, J. Penny 136
IFToMM 1998 Rotor bearing model order reduction M. Rades 148

www.rotordynamics.org/paperlists/IFTOMM.html 22/95
19:00, 30/11/2022 IFTOMM

IFToMM 1998 On the application of the substructuring method to the analysis of rotor/stator-
dynamics R. Rocha, M. Zindeluk, A. Neto 160
IFToMM 1998 Nonlinear rotor dynamic analysis using finite elements and equivalent
linearization A. EI-Shafey, H. N. Bayoumi, A. M. A. Mansour 175
IFToMM 1998 Time integration of transient vibrations of nonlinear rotordynamic systems having
mass coupled substructures H. Boll 188
IFToMM 1998 Dynamic analysis of a crankshaft in bending with an electric motor and nonlinear
fluid film-bearings R. Dufour, M. Gerard, M. Chareyron 200
IFToMM 1998 Numerical methods for the stability investigation of flexural vibration of rotor
systems supported by fluid film-bearings J. Zapomel, E. Malenovsky 212
IFToMM 1998 Dynamic characteristics of pump seals with spiral groove T. Iwatsubo, H. Ishimaru
224
IFToMM 1998 Influence of labyrinth seal geometry on rotordynamic coefficients K. Kwanka 241
IFToMM 1998 Development of labyrinth seals and gas bearings in high-performance
turbomachinery using finite difference-techniques H. P. Weiser, R. Nordmann 252
IFToMM 1998 Vibrations in misaligned rotor ball bearing systems C. W. Lee, Y. S. Lee 262
IFToMM 1998 Diffuser rotating stall and influence on shaft excitational forces, Part 1:
Experimental investigation E. Torbergsen, M. White 274
IFToMM 1998 Gas turbine rotor exposed to the Newkirk-effect B. Larsson 286
IFToMM 1998 Rotor dynamic analysis of a submerged turbine generator driven by liquefied
natural gas A. J. Smalley. J. Hollingsworth, G. Habets, H. Kirnmel 298
IFToMM 1998 A rotordynamic analysis of a fourteen stage pump with particular emphasis on the
impeller shroud and wearing seal modelling A. S. Lee, T. W . Ha 310
IFToMM 1998 Prediction and measurement of dynamic gear transmission error S. Du, R. B.
Randall 323
IFToMM 1998 A two stage approach for enhanced diagnosis of rotating machines S. Seibold. I.

www.rotordynamics.org/paperlists/IFTOMM.html 23/95
19:00, 30/11/2022 IFTOMM

Bucher 338
IFToMM 1998 Advanced vibrational diagnostic for failure source localisation U. Suedmersen, Y.
Liu, D. Stegemann, W. Reimche, 0. Pietsch 350
IFToMM 1998 Condition monitoring: Experimental study of the transmission error for the
detection of gear faults J. Mahfoudh, D. Remond, C. Bard, C. Renoux 364
IFToMM 1998 Optional techniques for active magnetic bearing equipped flexible rotors 0.
Matsushita, T. Iwatsubo, K. Iizuka 377
IFToMM 1998 Engineering for rotors supported on magnetic bearings: The process and the tools
J. Schmied, F. Betschon 389
IFToMM 1998 Model reduction and robust observer design for turbine generator shafts P. Lang,
D. Pratzel-Wolters, J. Xu, S. Kulig 407
IFToMM 1998 Rotordynamic modelling and control system design for an aircraft gas turbine
rotor suspended on magnetic bearings B. Antkowiak, J. Scholten, F. Nelson, 419
IFToMM 1998 Active vibration damping for rotors by a controllable oil-film bearing W. Wu, F.
Pfeiffer 431
IFToMM 1998 Coupling of elastic and gyroscopic modes of rotating disc structures F. Reuter 443
IFToMM 1998 Vibration and life estimation of rotor structures H. Irretier, 0. Repetski 456
IFToMM 1998 A contact model of a rotating, rubbing blade I. Jiang, J. Ahrens, H. Ulbrich, E. M.
Scheideler 478
IFToMM 1998 2D self excited vibration of a palisade and a bladed disk R. Rzadkowski, V. Gnesin,
A. Kovalyov 490
IFToMM 1998 A comparison of the experimental and predicted rigid rotor stability threshold of a
highly preloaded three lobe bearing R. D. Flack, G. I. Kostrzewsky 501
IFToMM 1998 The effects of vertical preload and load direction on the stability characteristics of
offset-halves journal bearings M. Tanaka, K. Suzuki 513
IFToMM 1998 Oil whip in transient operating conditions S. Verstege 525

www.rotordynamics.org/paperlists/IFTOMM.html 24/95
19:00, 30/11/2022 IFTOMM

IFToMM 1998 Non-linear inverse modelling to estimate forces in journal bearings from
measured orbits M. Jecmenica, M. White, N. Bachschmid, E. Tanzi 536
IFToMM 1998 Dynamic characteristics of hydrodynamically lubricated tilting pad thrust bearings
E. Storteig, M. F. White 548
IFToMM 1998 Application and remarks on the finite bearing solution (FBS) A. Fuerst, H. I. Weber,
G. C. Brito 560
IFToMM 1998 Experimental analysis of a tilting pad journal bearing influence in a vertical rotating
system K. L. Cavalca, F. G. Dedini 571
IFToMM 1998 Vibration control of a rotor by changing preload of a tilting pad bearing Y.
Kanemitsu, S. Kijimotao, K. Matuda, Y. Tatebayashi, M. Hata 583
IFToMM 1998 Observation of disk axial face excited instability R. G. Kirk 595
IFToMM 1998 Subharmonic oscillation of order 1/2 and internal resonance phenomena in rotor
systems Y. Ishida, T. Inoue, K. Takeuchi 605
IFToMM 1998 On the dynamical behaviour of a textile spindle with clearances D. Waldeck 617
IFToMM 1998 Parametrical vibration of rotary flexibly supported foundations with rotor 0.
Zahorec, M. Musil, P. Elesztos 629
IFToMM 1998 Field balancing of two rotors placed on a coupling supporting structure H. Wilhelm,
H. P: Wolfel 641
IFToMM 1998 Balancing of flexible rotors some considerations on modal convergence H.
Schneider, A. G. Parkinson 653
IFToMM 1998 A new balancing method applying LMI optimization method H. Kanki, M.
Kawanishi, K. Ono 667
IFToMM 1998 The use of model parameters for the identification of the unbalance distribution of
elastic rotors J. Belz, H. Irretier 679
IFToMM 1998 New excitation and response measurement techniques for modal testing of
flexible rotors T. Kreuzinger-Janik, H. lrretier 695

www.rotordynamics.org/paperlists/IFTOMM.html 25/95
19:00, 30/11/2022 IFTOMM

IFToMM 1998 Experimental validation of unbalance identification methods N. Bachschmid, R.

Dellupi 709
IFToMM 1998 Parameter identification of rotormachinery supporting structures A. Curami, A.
Vania 722
IFToMM 1998 Experimental identification of the pedestals in a rotor-bearing-pedestal system N.
S. Feng, E. J. Hahn 734
IFToMM 1998 Testing of micromotors and rotating microsystems G. Haddad, W. Brenner, G.
Abraham, A. Matzner, G. Popovic, A. Vujanic 746
IFToMM 1998 Dry friction induced backward whirl: theory and experiment A. Bartha 756
IFToMM 1998 A contribution to the rotor-stator contact J. Gruber 768
IFToMM 1998 Whirl simulation of a rotor colliding with annular guard during acceleration S.
Yanabe 780
IFToMM 1998 Nonlinear stability analysis of a single mass rotor contacting a rigid auxiliary
bearing H. Ecker 790
IFToMM 1998 Rub induced non-linear vibrations considering the thermo-elastic effect R. Liebich
802
IFToMM 1998 Steady state analysis of a multi-disk or continuous rotor with one retainer bearing
G. Wegener, R. Markert, K. Pothmann 816
IFToMM 1998 Travelling wave speed instability P. Schmiechen, D. Ewins 829
IFToMM 1998 Theoretical and experimental investigations of impeller casing interaction forces J.
Sobotzik, R. Fongang, R. Nordmannvg 841
IFToMM 1998 Numerical determination of radial electro-magnetic forces on rotors of electrical
machines D. Flockermann, M. Klocke, S. Kulig 856
IFToMM 1998 Simulation of a magnetic drive pump with asynchronous motor considering non-
linear effects C. Klesen, M. Matros, R. Nordmann 876
IFToMM 1998 Identification and reduction of the anisotropy of flexible rolls by partial machining

www.rotordynamics.org/paperlists/IFTOMM.html 26/95
19:00, 30/11/2022 IFTOMM

D. Wiese, M. Breitwieser, G. Wegener 888

IFToMM 1998 Active magnetic bearings for the identification of dynamic characteristics of
turbulent journal bearings E. Knopf, R. Nordmann 904
IFToMM 2002 Adaptive control of a rotor excited by destabilizing cross-coupling forces
Hirschmanner M, Steinschaden N and Springer H 38
IFToMM 2002 Fault diagnosis in a centrifugal pump using active magnetic bearings Nordmann R
and Aenis M 46
IFToMM 2002 Two-dimensional vibration abatement in a turning process Al-Jumaily AM, Oberst
H and Yan W 56
IFToMM 2002 A magnetorheological fluid damper for rotor applications Forte P, Paterno M and
Rustighi E 63
IFToMM 2002 Path-following analysis versus WMSL method – an application for nonlinear
magnetic bearing characteristics Steinschaden N and Springer H 71
IFToMM 2002 Active stabilisation of a rigid rotor by a piezoelectrically controlled mobile journal
bearing system Przybylowicz PM 79
IFToMM 2002 A study on parametric excitation for suppressing self-excited rotor vibrations Ecker
H, Pumhoessel T and Tondl A 85
IFToMM 2002 A novel frequency domain identification of a MIMO AMB rigid rotor system Ahn H-
J, Park I-H and Han D-C 93
IFToMM 2002 Fuzzy modal control of a flexible rotor by piezoelectric actuators arranged on a
plane Malhis M, Gaudiller L and Der Hagopian J 101
IFToMM 2002 LPV model reduction of high speed gyroscopic rotors in magnetic bearings for
robust control Li G, Lin Z and Allaire PE 117
IFToMM 2002 General influence coefficient algorithm in balancing of rotating machinery Yu X 123
IFToMM 2002 Multi plane balancing of a rotating machine using a single transducer Zang C, Lees
AW and Friswell MI 130

www.rotordynamics.org/paperlists/IFTOMM.html 27/95
19:00, 30/11/2022 IFTOMM

IFToMM 2002 Limits for the use of auto-balancing Olsson K-O 137
IFToMM 2002 Effect of interfacial damping on blade stresses Rao JS, Singh AK and Borate S 146
IFToMM 2002 Measurement and analysis of random vibration of steam turbine low pressure end
blade Kaneko Y, Mori K, Iizuka S and Ooyama H 153
IFToMM 2002 Model-based estimation of contact forces of a rotating blade Ahrens J, Soeffker D
and Ulbrich H 160
IFToMM 2002 Vibrations of rotating open cylindrical shell blade Kee Y-J and Kim J-H 167
IFToMM 2002 Rotordynamic stability case studies De Choudhury P 175
IFToMM 2002 The field test and calculation analysis for unstable vibration of 320MW
turbomachinery rotor-bearing systems Lu S, Fu H, Wang J and Ma Y 183
IFToMM 2002 Case studies of fault identification in power plant large rotating machinery
Bachschmid N, Pennacchi P, Vania A, Zanetta GA and Gregori L 191
IFToMM 2002 Early detection of non-linear effects in fluid-film journal bearings Pennacchi P and
Vania A 201
IFToMM 2002 Model based analysis of the non-linear behaviour of oil-film journal bearings
Bachschmid N and Vania A 209
IFToMM 2002 Condition monitoring using neural networks Hackstein H 219
IFToMM 2002 Condition monitoring: experimental study of combined faults on gears and
bearings Mahfoudh J and Breneur C 227
IFToMM 2002 Improved machine vibration models Lees AW 235
IFToMM 2002 Operating experience with an on-line vibration control system for PWR main
coolant pumps Runkel J and Hellmich 243
IFToMM 2002 The research for the system and network of condition monitoring, data
management, analysis, diagnosis and remote transmission of turbo-generator group Lu S, Tong
X, Jin R and Wang J 251
IFToMM 2002 Experimental validation of an original software package based on chaos theory for

www.rotordynamics.org/paperlists/IFTOMM.html 28/95
19:00, 30/11/2022 IFTOMM

monitoring and diagnostics of rotating machinery Lucifredi A, Magnetto A and Silvestri P 257
IFToMM 2002 Localisation of the TDC-position from crankshaft speed fluctuation measurements
Johnsson R and Agren 265
IFToMM 2002 Rotordynamic fault diagnostics using phase coherent filtering Pooley J and Murray
S 273
IFToMM 2002 Bond graph approach in diagnosing truncated beat phenomena in high speed
rotating machinery Giridhar RK, Barad S, Suresh TN and Mukherjee A 279
IFToMM 2002 Investigations into engine transient response due to internal and external dynamic
excitations Moreno Barragan JA 286
IFToMM 2002 Diagnosis of localised and extended rolling element bearing faults in the presence
of strong gear signals Randall RB and Antoni J 294
IFToMM 2002 Development of a hybrid neural/expert system to diagnose problems in induction
motors Brito JN and Pederiva R 302
IFToMM 2002 Parameter monitoring of a rotor system excited by stochastic forces Pederiva R
and Eduardo AC 310
IFToMM 2002 Salvaging transient measurement signals with serious flaws using wavelet analysis
Uchikawa H, Shi Q, Ando S and Saegusa H 318
IFToMM 2002 Aggregated monitoring of technical condition in industrial systems Steinebach C
and Thorstensen TA 326
IFToMM 2002 Determination of degree of bilinearity and cyclostationarity in signals: applications
to rotating machines Bouillaut L, Raad A and Sidahmed M 335
IFToMM 2002 Studies on rotor cracks due to bending and torsional effects Subbiah R,
Montgomery J and Banks RL 343
IFToMM 2002 Dynamics of rotating shafts with delaminations – modeling and solution approach
Wauer J 350
IFToMM 2002 Non-linear effects in cracked rotors Bachschmid N and Tanzi E 358

www.rotordynamics.org/paperlists/IFTOMM.html 29/95
19:00, 30/11/2022 IFTOMM

IFToMM 2002 Crack detectability in vertical axis cooling pumps during operation Bachschmid N,
Pennacchi P, Tanzi E, Verrier P, Hasnaoui F and Aabadi K 366
IFToMM 2002 The complicated response of a simple rotor with a fatigue crack Yang JD, Zheng TS,
Zhang W, Yuan HQ and Wen BC 374
IFToMM 2002 Vibration analysis in the characterization of the dynamic behaviour of cracked
rotating shafts García-Illescas R and Gomez-Mancilla J 380
IFToMM 2002 Improvement of damping parameters of flexible rotors by experimental modal
analysis and model updating Irretier H and Lindemann S 388
IFToMM 2002 Unbalance responses of rotor/stator systems with nonlinear bearings by the time
finite element method Demailly D, Thouverez F and Jezequel L 396
IFToMM 2002 Generalized entities: A modern framework for rotor dynamics software Swanson
EE and Pulitzer III SW 404
IFToMM 2002 Stabilisation of high-speed flexible rotors supported by oil-film bearings Sahinkaya
MN and Burrows CR 412
IFToMM 2002 Modeling effect of flexible and rigid couplings in mechanical systems Tapia AT and
Cavalca KL 420
IFToMM 2002 Practical applications of singular value decomposition in rotordynamics Cloud CH,
Foiles WC, Li G, Maslen EH and Barrett LE 429
IFToMM 2002 Perturbation theory in modal analysis of mistuned rotors Irwanto B, Hardtke H-J
and Pawandenat D 439
IFToMM 2002 Partial compensation of unbalance by one- and two-plane automatic balancing
devices Ryzhik B, Duckstein H and Sperling L 446
IFToMM 2002 Electromagnetic circulatory forces and rotordynamic instability in electric
machines Holopainen TP, Tenhunen A and Arkkio A 456
IFToMM 2002 Finite element stability analysis of multibearing rotors with internal damping Forrai
L 464

www.rotordynamics.org/paperlists/IFTOMM.html 30/95
19:00, 30/11/2022 IFTOMM

IFToMM 2002 A method for analysing the dynamic behavior of rotor-bearing systems with
nonlinear supports Xia S, Wang L, Huang W, Hu C and Jiao Y 471
IFToMM 2002 Prediction of rotordynamic stability for a high pressure high speed turbopump unit
Kwak H-D, Lee Y-B, Kim C-H, Ha T-W and Woo Y-C 478
IFToMM 2002 Characterisation of rotating machinery dynamics within limited frequency intervals
using modal analysis Gutierrez-Wing ES and Ewins DJ 486
IFToMM 2002 On the simultaneous forward and backward whirling of flexible rotors: numerical
analysis and experimental verification Dias Jr M, Idehara SJ, Mesquita ALA and Miranda UA 496
IFToMM 2002 On the application of directional time-frequency distributions to the identification
of simultaneous forward and backward whirling in flexible rotors Miranda UA, Dias Jr M,
Mesquita ALA and Idehara SJ 504
IFToMM 2002 Rotordynamic problems of high speed centrifuges Stelter P and Harms A 512
IFToMM 2002 Coupled non-linear vibrations in 200 MW turbosets Kicinski J 520
IFToMM 2002 An experimental analysis of rotors on flexible structures Cavalca KL, Cavalcante PF
and Okabe EP 531
IFToMM 2002 The comparison of pressure and velocity fields of squeeze film dampers calculated
by the Reynolds and Navier-Stokes Equations Pochyly F and Malenovsky E 541
IFToMM 2002 A parametric study of the stability of high-speed floating bush journal bearings
Tanaka M 549
IFToMM 2002 Interaction of squeeze film dampers and hole feed systems and its influence on
the dynamics of a Jeffcott rotor Assis Rodrigues F, Thouverez F and Jezequel L 556
IFToMM 2002 Experimental and theoretical study on swirl braked labyrinth seal Iwatsubo T and
Iwasaki Y 564
IFToMM 2002 Optimal design of squeeze film damper using an enhanced genetic algorithm Kim
Y-C, Ahn Y-K and Yang B-S 572
IFToMM 2002 A general nonlinear analytical model of oil-film forces for finite length journal

www.rotordynamics.org/paperlists/IFTOMM.html 31/95
19:00, 30/11/2022 IFTOMM

bearings Zhang W, Zheng TS, Yang JD and Ma JM 580

IFToMM 2002 Perturbation solution of Reynolds equation for finite journal bearings El-Shafei A
588
IFToMM 2002 Dynamic coefficients of plain annular gas seals – a comparison of experimentally
and numerically derived results Kwanka K, Sobotzik J and Glockner O 599
IFToMM 2002 Dynamics of an over-hung rotor with a disc-type magneto-rheological fluid damper
Zhu C, Robb DA and Ewins 607
IFToMM 2002 Instability and control of a cantilever rotor supported on MR fluid damper and
sliding bearing Wang J and Meng G 615
IFToMM 2002 An unsteady oil-film force model of a bearing with multi-pads for nonlinear
dynamic analysis of rotor-bearing systems Zheng TS, Shen GY and Zhang W 621
IFToMM 2002 Damping and stiffness coefficients of elastomer rings and their optimised
application in rotor dynamics: theoretical investigations and experimental validation Bormann A
and Gasch R 628
IFToMM 2002 An efficient calculation method of nonlinear oil film forces in journal bearings Xia
S, Jiao Y, Chen Z, Huang W and Zhang Z 645
IFToMM 2002 Cavitation effects on the stability of a submerged journal bearing Sawicki JT and
Rao TVVLN 652
IFToMM 2002 Load direction effects on measured static and dynamic operating characteristics of
tilting pad journal bearings Brechting R, Prior RJ, Flack RD and Barrett LE 659
IFToMM 2002 Thermoelastohydrodynamic analysis of journal bearings with a generalized 2-D
energy equation He M and Allaire P 666
IFToMM 2002 TEHD modeling of leading edge groove journal bearings He M, Allaire P, Barrett L
and Nicholas J 674
IFToMM 2002 A study of the dynamic behaviour of transmissions sets using epicyclic gear trains
Morais RF and Dedini FG 682

www.rotordynamics.org/paperlists/IFTOMM.html 32/95
19:00, 30/11/2022 IFTOMM

IFToMM 2002 Development of an epicyclic gear train design methodology for two linked EGTs
Dedini FG, Amaral D and Becker M 690
IFToMM 2002 The dynamic modelling of multiple pairs of spur gears in mesh including friction
and geometrical errors Jia S, Howard I and Wang J 698
IFToMM 2002 The application of time-frequency analysis in diagnostics of local damages of
toothed gears Wilk A, Madej H and Lazarz B 706
IFToMM 2002 Multi-domain analysis of rotating machinery Wettergren HL, Blom OCJ and
Jirstrand M 714
IFToMM 2002 Simulation of rotordynamic effects in electric power generators due to electrical
system anomalies Blom OCJ and Wettergren HL 722
IFToMM 2002 The vibration behavior of centrifugal compressor impeller blades in the five-axis
CNC flank milling process Hasemann H, Rautenberg M, Hagelstein D and Sonthipermpoon K 730
IFToMM 2002 Estimation of the rotating stall frequency from rotor frequency and common blade
number integer fractions in a four stage axial compressor Hellmich B, Fischer A, Reissner A,
Runkel J and Seume J 737
IFToMM 2002 A review of the origins and current status of rotor dynamics Nelson FC 745
IFToMM 2002 Evaluation of rotordynamical concepts subjected to rotating unbalance and
impulse Karlberg M and Aidanpaa J-O 752
IFToMM 2002 Rotordynamics of turbomachinery ... looking back ... looking forward Childs DW
759
IFToMM 2002 Experimental determination of bearing performance of the VentrAssist rotary
blood pump Chung M, Zhang N, Tansley GD and Woodard JC 767
IFToMM 2002 Development and design of traction drive for continuously variable transmission
for low power and torque systems Forti AW and Dedini FG 776
IFToMM 2002 Finite element analysis of rolling contact of two paper machine rolls Järvenpaa V-M
and Keskinen E 784

www.rotordynamics.org/paperlists/IFTOMM.html 33/95
19:00, 30/11/2022 IFTOMM

IFToMM 2002 In-operation modal analysis – application to rotating machinery diagnostics Uhl T,
Lisowski W and Batko W 791
IFToMM 2002 3D inviscid unsteady forces of stator-rotor last steam turbine stage with vibrating
blades Rzadkowski R and Gnesin V 798
IFToMM 2002 Dynamic characteristics of tilting 5-pad journal bearing with asymmetric support of
pads Strzelecki S 807
IFToMM 2002 Inverse problems in rotor dynamics using optimization techniques Assis EG and
Steffen Jr. V 815
IFToMM 2002 Identification of dynamic properties of a turboset rotor from its run down Balda M
822
IFToMM 2002 A reduced modeling for flexible rotor-bearing systems and its application
Matsushita O, Fujiwara H and Takahashi N 830
IFToMM 2002 The application of modal synthesis method on torsional vibration analysis for
rotorbearing system Zou C-P, Chen D-S and Hua H-X 838
IFToMM 2002 Modal analysis of a large turbine-generator system with foundation effects Konishi
T, Allaire P and Untaroiu C 846
IFToMM 2002 Numerical evaluation of an identification technique for flexibly supported rigid
turbomachinery foundations Feng NS and Hahn EJ 854
IFToMM 2002 Global dynamics of shaft lines rotating in surrounding fluids - application to thin
fluid films Lornage D and Jacquet-Richardet G 862
IFToMM 2002 Identifying resonances in rotating structures with interference diagrams Ponge-
Ferreira W, Nigro FEB and Irretier H 870
IFToMM 2002 Part I – Theoretical model for a synchronous thermal instability operating in
overhung rotors Balbahadur AC and Kirk RG 878
IFToMM 2002 Part II – Case studies for a synchronous thermal instability operating in overhung
rotors Balbahadur AC and Kirk RG 887

www.rotordynamics.org/paperlists/IFTOMM.html 34/95
19:00, 30/11/2022 IFTOMM

IFToMM 2002 Driving shaft bearing for clearing saw Falth MKE and Wettergren HL 897
IFToMM 2002 Nonstationary oscillations of a nonlinear rotor system with internal resonance
during acceleration through critical speeds Ishida Y, Murakami S and Inoue T 905
IFToMM 2002 Rotor motion during stator contact Ehehalt U and Markert R 913
IFToMM 2002 Subsynchronous resonance in turbine generators caused by faulty induction
machines Joswig F and Kulig S 921
IFToMM 2002 How interference fits stiffen the flexible rotors of centrifugal compressors Smalley
A J, Pantermuehl PJ, Hollingsworth JR and Camatti M 928
IFToMM 2002 Theoretical and experimental investigation on the dynamic behaviour of disk
blades during sharpening Carmignani C, Forte P and Rustighi E 936
IFToMM 2002 Flexible rotor supported by viscoelastic foil bearings beyond the bending critical
speed Lee Y-B, Kim T-H, Kim C-H, Lee N-S and Jang G-H 944
IFToMM 2002 Stability and bifurcation analysis of periodically excited rotors supported by
hydrodynamic bearings of non-circular cross section Zapomel J 952
IFToMM 2002 Nonlinear dynamics of multi-disc rotor in dry friction bearings Zigulic R, Butkovic M
and Braut S 960
IFToMM 2002 An approximate model for vibration response of bearing shells of turbo-alternator
set Junghare AS, Modak JP and Kothari AG 976
IFToMM 2002 Study on the bifurcation and chaos behavior of rubbing rotor-stator systems Yuan
HQ, Wang DY, Yang JD, Liu YX and Wen BC 984
IFToMM 2002 Uncertain responses of rotor systems with rubbing Zhang YM and Wen BC 989
IFToMM 2002 Investigation of self-excited vibrations in flexible labyrinth seals due to instationary
pressure fields Schuck G and Nordmann R 995
IFToMM 2002 Transient vibration prediction for rotors on ball bearings using load-dependent
nonlinear bearing stiffness Fleming DP and Poplawski JV 1003
IFToMM 2002 A study of ball bearing noise due to the presence of pits and grease contamination

www.rotordynamics.org/paperlists/IFTOMM.html 35/95
19:00, 30/11/2022 IFTOMM

Tandon N, Soni D and Nakra BC 1009

IFToMM 2002 Experiments and calculations on the torsional transient properties of a coal
conveyor drive Rieger NF and Wang L 1016
IFToMM 2002 Aspects of torsional system design for large single shaft gas turbine drives with
variable frequency start up motors De Choudhury P 1026
IFToMM 2002 Lateral bending interaction with torsional oscillations in rolling contact system
dynamics Keskinen E, Montonen J, Launis S and Cotsaftis M 1034
IFToMM 2002 POSTER PRESENTATION More accurate results of spectrum analysis using
coherence function Dabrowski Z and Dziurdz J 1043
IFToMM 2002 POSTER PRESENTATION An attempt at the application of combined discriminators
in the diagnostics of car suspensions Gardulski J and Warczek J 1044
IFToMM 2002 POSTER PRESENTATION Formulation of an approximate generalised actual data
based model for the vibration response of turbo-alternator sets Junghare AS, Modak JP and
Kothari AG 1045
IFToMM 2002 POSTER PRESENTATION Monitoring and diagnosis of rolling element bearings by
dynamic strain measurement Kanki H and Deng S 1046
IFToMM 2002 POSTER PRESENTATION Dynamics of a maneuvering rotor, Part I: Mathematical
modelling and study of a rotor in steady sate motion Lin FS and Meng G 1047
IFToMM 2002 POSTER PRESENTATION Dynamics of a maneuvering rotor, Part II: Study of a rotor
with a constant acceleration or deceleration Lin FS and Meng G 1048
IFToMM 2002 POSTER PRESENTATION The strategy and technology for highly-efficient balancing
of large scale turbogenerator units Lu S, Wang J, Ma Y and Jin R 1049
IFToMM 2002 POSTER PRESENTATION Using the modal method in rotor dynamic systems
Malenovsky E 1050
IFToMM 2002 POSTER PRESENTATION Methodology development based on robust design and
reliability for fitting of parameters in mechanical systems Silveira ZC and Cavalca KL 1051

www.rotordynamics.org/paperlists/IFTOMM.html 36/95
19:00, 30/11/2022 IFTOMM

IFToMM 2002 POSTER PRESENTATION Effect of mutual position of bearing shells in journal
bearings with non-circular contour on self-excited vibration of the rotor Starczewski Z and
Przybylowicz PM 1052
IFToMM 2002 POSTER PRESENTATION Vibration analysis of rotating cantilever beams considering
task-space Yoon H-I, Cho J-R and Son I-S 1054
IFToMM 2002 POSTER PRESENTATION MDOF model descriptions and stability analysis of
grinding systems Yuan L, Jarvenpaa VM and Keskinen E 1055
IFToMM 2002 POSTER PRESENTATION New theory of rotor dynamics: disk rotor dynamics with
static unbalance Zhivotov AY 1056
IFToMM 2006 Integrating Rotordynamic and Electromagnetic Dynamic Models for Flexible-Rotor
Induction Machines K. Kalita, W.K.S. Khoo, S.D. Garvey*, University of Nottingham, UK
IFToMM 2006 Characteristics of a Hydro Power Rotor System due to a Sudden Loss of Magnetic
Field M. Karlsson*, J.-O. Aidanpää, Lulea University of Technology, Sweden
IFToMM 2006 Rotor Vibration Control with Electro-Magnetic Exciter M.C. Nighil, IIT Kharagpur,
India; J. K. Dutt*, IIT Delhi, India; H. Irretier, University of Kassel, Germany
IFToMM 2006 About the Implementation of an Optimal Modal Controller in Flexible Rotor by
Using Piezoelectric Actuators R.C. Simões, Federal University of Ubelândia, Brazil; J. Der
Hagopian, J. Mahfoud UMR CNRS 5006, INSA de Lyon, France; V. Steffen*, Federal University of
Ubelândia, Brazil
IFToMM 2006 Active Vibration Control of Nonlinear Cantilever Shaped Blades in Turbomachinery
T. Pumhoessel*, H. Springer, Vienna University of Technology, Austria
IFToMM 2006 Design Optimisation of Thrust Magnetic Bearings Using Genetic Algorithms J.S.
Rao, R. Tiwari*, Indian Institute of Technology Guwahati, India
IFToMM 2006 Rotor Dynamics Design on Magnetic Bearings P. De Choudhury*, Pran RDA
Consulting Inc., USA
IFToMM 2006 Experimental Study of Magnetic Bearing Configurations P. Samanta*, H. Hirani,

www.rotordynamics.org/paperlists/IFTOMM.html 37/95
19:00, 30/11/2022 IFTOMM

Indian Institute of Technology Bombay, India

IFToMM 2006 Vibration Damping of Aero Engine Rotors by Elastomer Ring Bearings R. Liebich*,
D. Eitner, Rolls-Royce Deutschland Ltd. & Co KG, Germany; A. Bormann, TU Berlin, Germany
IFToMM 2006 Non-linear Behaviour of a Squeeze Film Damper - Experimental Results B.
Domes*, Rolls-Royce Deutschland Ltd. & Co KG, Germany; M. Levesley, University of Leeds, UK
IFToMM 2006 Elimination of Unstable Ranges of an Asymmetrical Shaft Utilizing Discontinuous
Spring Characteristics Y. Ishida*, J. Liu, Nagoya University, Japan
IFToMM 2006 Investigation of a Rotordynamic Instability in a High Pressure Centrifugal
Compressor Due to Damper Seal Clearance Divergence J.J. Moore*, Southwest Research
Institute, USA; M. Camatti, GE Oil & Gas, Italy; A.J. Smalley, Tony Smalley Consulting, LLC, USA; G.
Vannini, GE Oil & Gas, Italy; L.L. Vermin, Shell Petroleum Development Co. of Nigeria, Ltd., Nigeria
IFToMM 2006 Labyrinth Seal Forces for a High Speed Centrifugal Impeller Eye Seal R.G. Kirk*, Z.
Guo, Virginia Polytechnic Institute and State University, USA
IFToMM 2006 FE Lubrication Analysis and Dynamic Characteristics of Herringbone Groove Air
Bearing Applied to Color Wheel for Projection Television A.S. Lee*, Korea Institute of Machinery
and Materials, South Korea; K.G. Bang, Samsung Electro-Mechanics Co., South Korea
IFToMM 2006 Hydrostatic Asymmetric Journal Air Bearings for ACROSS Transmitters T. Ise*, T.
Torii, N. Morita, Shizuoka University, Japan; M. Okano, National Institute of Advanced Industrial
Science and Technology, Japan; S. Togo, Togoku-Gakuin University, Japan
IFToMM 2006 Probabilistic Robust Design of Externally Pressurized Gas-Lubricated Porous
Tilting-Pad Bearings E.-R. Wu*, Mega Research Inc., USA
IFToMM 2006 Rotor-Bearing System Instabilities Considering a Non-linear Hydrodynamic Model
H.F. Castro*, K.L. Cavalca, Unicamp, SP Brazil; R. Nordmann, TU – Darmstadt, Germany
IFToMM 2006 Stability of Elastic Rotor Operating in 3-lobe Journal Bearings of Different Sleeve
Profile S. Strzelecki*, Lodz University of Technology, Poland
IFToMM 2006 Investigation of the Stability of a Rotor Supported by Oil Journal Wave Bearing F.

www.rotordynamics.org/paperlists/IFTOMM.html 38/95
19:00, 30/11/2022 IFTOMM

Dimofte*, University of Toledo at NASA GRC, USA; N.M. Ene, University of Toledo, USA; T.G. Keith
Jr, R.F. Handschuh, NASA GRC, USA
IFToMM 2006 Measured Dynamic Performance of a Tilting Pad Journal Bearing over a Range of
Forcing Frequencies R.D. Flack*, University of Virginia, USA; K.D. Wygant, Concepts NREC, USA;
L.E. Barrett, University of Virginia, USA
IFToMM 2006 Effect of Angular Spring and Angular Damping of Oil Film on the Stability
Characteristics of Tilting-Pad Journal Bearings H. Taura*, Nagaoka University of Technology,
Japan; M. Tanaka, National Institution for Academic Degrees and University Evaluation, Japan
IFToMM 2006 Rotordynamic Analysis of Systems with a Non-linear Model of Tilting Pad Bearings
E.P. Okabe*, K.L. Cavalca, DPM – FEM - Unicamp, Brazil
IFToMM 2006 Torsional Vibrations of a Steam Turbo Generator: Modelling, Experimental
Measurements and Model Updating P. Pennacchi*, A. Vania, D. Molteni, Politecnico di Milano,
Italy; E. Pesatori, G. Turozzi, F. Frattaroli, Franco Tosi Meccanica S.p.A., Italy
IFToMM 2006 Torsional Behaviour Improvement on Reciprocating Compressors J.-M. Pugnet*, J.
Camus, GE Oil&Gas, France; F. Grazziani, C. Mazzali, GE Oil&Gas, Italy; M. Baggiani, SINT
Technology S.r.l., Italy
IFToMM 2006 Review of High Speed Balancing Technology H. Kanki*, M. Kawanishi, Kobe
University, Japan
IFToMM 2006 Unbalance Response and Field Balancing of an 1150-MW Turbine-Generator with
Generator Bow E.J. Gunter*, RODYN Vibration Analysis, Inc., USA
IFToMM 2006 Single Plane and Multi-Plane Rotor Balancing Using Only Amplitude W.C. Foiles*,
BP America, USA; P.E. Allaire, University of Virginia, USA;
IFToMM 2006 Detuning of Pelton Runners J. Schmied*, DELTA JS Ltd., Switzerland; T. Weiss, R.
Angehrn, VA TECH HYDRO Ltd., Switzerland
IFToMM 2006 Calibration of Rotordynamic Models from Coast Down Data A. El-Shafei*, Cairo
University, Egypt; A.A. Younan, Cairo University, Egypt

www.rotordynamics.org/paperlists/IFTOMM.html 39/95
19:00, 30/11/2022 IFTOMM

IFToMM 2006 Calibrating a Large Compressor’s Rotordynamic Model: Method and Application G.
Vannini*, GE Oil & Gas Nuovo Pignone, Italy; A.J. Smalley, Tony Smalley Consulting, LLC, USA; T.J.
Hattenbach, Bechtel Corporation, USA; H.P. Weyermann, ConocoPhillips Company, USA; J.R.
Hollingsworth, Southwest Research Institute, USA
IFToMM 2006 Optimisation of Critical Speeds and Normal Modes of Rotor Systems by means of
Sensitivity Analysis Techniques A. Vania*, Politecnico di Milano, Italy
IFToMM 2006 Stability Analysis of a Centrifugal Hydrogen Compressor S. Palomba*, B. Picasso,
University of Cagliari, Italy
IFToMM 2006 Axial Vibration due to Thrust Bearing and its Elimination J.J. Yu*, GE Energy, USA
IFToMM 2006 Case Study of a Catastrophic Thrust Bearing Failure in a Blower due to Axial
Resonance R. Sant’Anna*, Landulpho Alves Refinery PETROBRAS, Brazil; H.I. Weber, Pontificia
Universidade Catolica, Brazil; W. Matos, TECVIB Engenharia Ltda, Brazil
IFToMM 2006 On The Use of Rotor Vibration Analysis and Measurement Tools to Cure Power
Plant Machinery Vibration M.L. Adams Jr.*, Case Western Reserve University, USA; M.L. Adams,
Machinery Vibration Inc, USA
IFToMM 2006 Experimental Validation of Mistuned Bladed Disk Vibration Predictions I.A. Sever*,
Rolls-Royce plc, England; A.B. Stanbridge, D.J. Ewins, Imperial College London, England;
IFToMM 2006 The Forced Response of the Last Stage Turbine Bladed Disc of an Aircraft Engine R.
Rzadkowski*, M. Drewczynski, Polish Academy of Sciences, Poland; R. Szczepanik, Air Force
Institute of Technology, Poland
IFToMM 2006 Dynamic Behavior of Gas Turbines Considering Large Unbalance and Blade
Rubbing J. Ahrens*, Siemens AG, PG Industrial Applications, Germany; G. Ahaus, Siemens AG, PG
Products, Germany
IFToMM 2006 Nonlinear Dynamical Characteristics of a High-Speed Rub-Impact Microrotor
System with Scale Effects in Friction G. Meng*, W.-M. Zhang, Shanghai Jiao Tong University, P.R.
China; D. Chen, National Key Laboratory of Micro/Nano Fabrication Technology, P.R. China

www.rotordynamics.org/paperlists/IFTOMM.html 40/95
19:00, 30/11/2022 IFTOMM

IFToMM 2006 Non-Smooth Motion of Rotor Systems with Frictional Contacts B. Waltersberger*, J.
Wauer, Universität Karlsruhe, Germany
IFToMM 2006 Torsional and Translational Vibration Trending of Seeded Shaft Faults in a 41%
Reduced Scale Reactor Coolant Pump M.W. Trethewey*, M.S. Lebold, Penn State University, USA;
P. Gyomlai, Jeumont s.a. (AREVA), France; P.W. Garrett, E.J. Guindon, Southern Company, USA
IFToMM 2006 Vibration Diagnostics and Condition Assessment As Economic Tool Z. Racic*, D.B.A.
Z-R Consulting, USA
IFToMM 2006 A Comparative Experimental Study on the Use of Acoustic Emission and Vibration
Analysis for Rubbing Identification Z. Liu, X. Wang*, Harbin Institute of Technology, P.R. China
IFToMM 2006 Analysis and Suppression of Rubbing due to Contact in Rotating Machinery Y.
Ishida, Nagoya University, Japan; Md. Z. Hossain, Toyohashi University of Technology, Japan; T.
Inoue*, Nagoya University, Japan
IFToMM 2006 Effect of the Unbalanced Magnetic Pull in Two-Poles Slim Generators: Modelling
and Experimental Validation P. Pennacchi*, A. Vania, Politecnico di Milano, Italy; L. Frosini,
University of Pavia, Italy;
IFToMM 2006 Validation of Electromechanical Rotor Model for Cage Induction Motors with
Parallel Paths in Stator Windings T.P. Holopainen*, ABB Automation Products, Finland; S.A.
Aatola, VTT, Technical Research Centre of Finland, Finland; A. Burakov, A. Arkkio, Helsinki
University of Technology, Finland
IFToMM 2006 Optimal Controller Designs for Rotating Machines - Penalising the Rate of Change
of Control Forcing P.R. Houlston*, S.D. Garvey, A.A. Popov, University of Nottingham, UK
IFToMM 2006 Wavelet Based Adaptation of H-infinity Control in Flexible Rotor/Magnetic Bearing
Systems P.S. Keogh*, M.N. Sahinkaya, C.R. Burrows, S. Prabhakar, University of Bath, UK
IFToMM 2006 Passive and Active Control of Vibrations of a Rotor System by Means of an Oil
Bearing with Flexible Sleeves J.M. Krodkiewski*, The University of Melbourne, Australia; H. Song,
Dalian University of Technology, P.R. China; F. Chen, The University of Melbourne, Australia

www.rotordynamics.org/paperlists/IFTOMM.html 41/95
19:00, 30/11/2022 IFTOMM

IFToMM 2006 Dynamic Bending and Torsion Behaviour of a Cracked Pump Shaft N.
Bachschmid*, Politecnico di Milano, Italy; M. Mazza; E. Tanzi, Politecnico di Milano, Italy
IFToMM 2006 Non-Linear Behaviours in Cracked Rotors N. Bachschmid, E. Tanzi*, Politecnico di
Milano, Italy
IFToMM 2006 The Resonance Frequency Shift in Cracked Rotors: Numerical and Experimental
Results C.M. Stoisser*, F. Hasnaoui, H. Henry, Electricité de France R&D, France; N. Bachschmid,
E. Tanzi, Politecnico di Milano, Italy
IFToMM 2006 Stability Analysis of Gyroscopic Systems via Quadratic Matrix Equations N.
Wagner*, L. Gaul, University of Stuttgart, Germany
IFToMM 2006 Stability Analysis of the Rubbing Phenomenon with Gyroscopic Effect P. Triesz*,
Szechenyi Istvan University, Hungary
IFToMM 2006 A Tracking Solver Based Upon Sliding Mode Control and its Application O.
Matsushita*, H. Fujiwara, National Defense Academy, Japan
IFToMM 2006 Effect of Aerodynamic Bearings Nonlinearity on the Rotor Motion L. Púst*, J.
Kozánek, Institute of Thermomechanics ASCR, Czech Republic
IFToMM 2006 Numerical Analysis for Bump Foil Journal Bearing Considering Top Foil Effect and
Experimental Investigation Y.-B. Lee, D.-J. Park*, C.-H. Kim, Tribology research center, Korea
Institute of Science and Technology, South Korea
IFToMM 2006 Numerical Simulation of Seal Flow and Determination of Stiffness and Damping
Coefficients J.S. Rao*, M. Saravanakumar, Altair Engineering India Pvt. LTD, India
IFToMM 2006 Rotordynamic Force Coefficients for a New Damper Seal Design B. H. Ertas*, GE
Global Research Center, USA; J.M. Vance, Texas A&M University, USA
IFToMM 2006 Consideration of the Pressure Entrance Loss for the Analysis of Rotordynamic Gas
Seals Forces B. Grigoriev, Saint-Petersburg State Polytechnical University, Russia; J. Schmied,
DELTA JS AG, Switzerland; A. Fedorov, S. Lupuleac*, Saint-Petersburg State Polytechnical
University, Russia

www.rotordynamics.org/paperlists/IFTOMM.html 42/95
19:00, 30/11/2022 IFTOMM

IFToMM 2006 The Role of Fluid Film Extent on the Vibration Behaviour of Rotor Bearing Systems
D. Pham, N. Feng, E. Hahn*, University of New South Wales, Australia
IFToMM 2006 Advancement of a Radial Journal Bearing for Highest Load Capacity for Big Steam
Turbines for Power Generation B. Lüneburg*, D. Dettmar, Siemens Power Generation, Germany;
M. Medhioub, D. Thomas, Sartorius Bearing Technology GmbH, Germany; U. Mermertas, H.
Schwarze, TU Clausthal, Germany; E. Schüler, Ruhr-Universität Bochum, Germany; S. Kühl,
Fachhochschule Würzburg-Schweinfurt, Germany; E.G. Welp, Ruhr-Universität Bochum, Germany
IFToMM 2006 Stability Analysis of Imbalanced Rotors Supported by Short Journal Bearings
Cavitated by Air Sucked from the Ambient Space J. Zapomel*, VSB-Technical University of
Ostrava, Czech Republic
IFToMM 2006 Modal Analysis of Periodically Time-varying Linear Rotor Systems Using Floquet
Theory C. W. Lee*, Center for Noise and Vibration Control (NOVIC), Korea; D.-J. Han, Sunaerosys
Co., Korea; S.-W. Hong, Kumoh National Institute of Technology, Korea
IFToMM 2006 Correlation of Aircraft Engine Model Using Experimental Modal Analysis D. S.H.
Chan*, Pratt & Whitney Canada, Canada 17:00 Experimental Analysis of Coupled-Rotor
Vibrations in a Sheet-Fed Offset Printing Machine M. Messer*, H. P. Wölfel, Darmstadt University
of Technology, Germany
IFToMM 2006 Simulating Gear and Bearing Interactions in the Presence of Faults N. Sawalhi, R. B.
Randall*, H. Endo, The University of New South Wales, Australia
IFToMM 2006 Dynamic Analysis of a Three-Shaft Helical Gear Transmissive Rotor System H.
Chen*, Northeastern University Shenyang Blower Works (Group) Co.,Ltd., P.R. China; S.H. Yang, Y.
Zhang, Research and Development Office Shenyang Blower Works (Group) Co.,Ltd., P.R. China; Z.
H. Ren, Northeastern University, P.R.China; X.J. Wang, Shenyang Blower Works (Group) Co.,Ltd.
P.R. China; B.C. Wen, Northeastern University Shenyang, P.R. China
IFToMM 2006 Optimum Balancing of Flexible Rotors M. Balda*, Academy of Sciences of Czech
Republic, Czech Republic

www.rotordynamics.org/paperlists/IFTOMM.html 43/95
19:00, 30/11/2022 IFTOMM

IFToMM 2006 Balancing of Flexible Machines Without Trial Weights Using Optimization
Techniques M. V. Saldarriaga, V. Steffen Jr, Federal University of Uberlândia, Brazil; J. Der
Hagopian, J. Mahfoud*, UMR CNRS 5006, INSA de Lyon, France
IFToMM 2006 A Modal Approach to the Balancing of Rotors Affected by Gyroscopic Moments E.
S. Gutiérrez-Wing*, J. Teloxa-Reyes, CENIDET, México; J.E. Aguirre-Romano, IIE, México
IFToMM 2006 Fatigue Life of Steam Turbine Blades Using Stimulus Data From Field and
Laboratory Tests N.F. Rieger*, R.N. Salzman, STI Technologies, Inc., USA
IFToMM 2006 Reliability Analysis of Sliding-Bearing-Rotor System with Excessive Vibration Y.
Hongliang*, Z. Yimin, H. Qingkai, W. Bangchun, Northeastern University, P.R. China
IFToMM 2006 Fatigue Analysis of the Cracked Rotor by Means of the One- and Threedimensional
Dynamical Model T. Szolc*, T. Bednarek, I. Marczewska, A. Marczewski, W. Sosnowski, Institute of
Fundamental Technological Research of the Polish Academy of Sciences, Poland
IFToMM 2006 Rotor Vibrations in a Coiling Process H. J. Holl*, University of Linz, Austria; F.
Hammelmüller, Linz Center in Mechatronics GmbH, Austria
IFToMM 2006 Inverse Imbalance Reconstruction in Applications R. Ramlau*, Austrian Academy of
Science, Austria; J. Niebsch, Konrad-Zuse-Institute, Germany
IFToMM 2006 Dynamics of Vertical Rotor with Arbitrary Arrangement of Static and Moment
Unbalances A. Y. Zhivotov*, Y. G. Zhivotov, Yuzhnoye State Design Office, Ukraine
IFToMM 2006 The Effects of Coriolis Forces on Vibration Properties of Bladed Discs M. Nikolic*,
D. J. Ewins, E. P. Petrov, D. Di Maio, Imperial College London, England
IFToMM 2006 Numerical Simulation and Experimental Research on Vibro-Impact Between the
Tips of a Pair of Blades Z. Liu, X. Wang*, X. Hou, Harbin Institute of Technology, P.R. China
IFToMM 2006 A Constrained Lagrangian Approach for Modelling Multiple Contacts of Flexible
Rotors A.-H. G. Abulrub*, M. N. Sahinkaya, P. S. Keogh, C. R. Burrows, University of Bath, UK
IFToMM 2006 Analytical Study of Synchronous Full Annular Rub Motion of Jeffcott Rotor and its
Dynamic Stability W. Zhang*, B. Xu, W. N. Xu, Fudan University, P.R. China; J.D. Yang, Shanghai

www.rotordynamics.org/paperlists/IFTOMM.html 44/95
19:00, 30/11/2022 IFTOMM

Aerospace, P.R. China

IFToMM 2006 Self-Excited Vibration Between Rotor and Flexible Casing Due to Dry Friction Y.
Watanabe, EBARA RESEARCH CO.,LTD., Japan; Y. Kami*, T. Iwatsubo, Kansai University, Japan
IFToMM 2006 Fault Diagnosis in a Rotor Supported by Active Magnetic Bearings G. M. Silva,
Technological Center of Brazilian Navy, Brazil; R. Pederiva*, State University of Campinas, Brazil
IFToMM 2006 Bearing Fault Diagnosis Classification Based on Artificial Intelligence Methods
Using Wavelet Transform O. J. Lara*, C. Castejón, H. Rubio Alonso, E. Laniado, J. C. García-Prada,
Universidad Carlos III de Madrid, Spain
IFToMM 2006 Pseudo-Speed Tracking Order Analysis of Rotating Machinery Y. Gao*, Y. Guo, Y. L.
Chi, Kunming University of Science and Technology, P.R. China
IFToMM 2006 Robust Model Based Identification of Faults in Rotor Dynamics Using M-Estimators
P. Pennacchi*, A. Vania, N. Bachschmid, Politecnico di Milano, Italy
IFToMM 2006 Application of a Transfer Function Obtained by Variation Principles for a Steam
Turbine Journal Failure Analysis Based on "DOE" & Optimization Techniques G. Ventura*, C. Diaz,
H. Morales, CIATEQ, A.C., Mexico
IFToMM 2006 Nonlinear System Identification in Diagnostics of Rotating Machinery T. Barszcz*, T.
Uhl, J. Bednarz, WIMiR Akademia Górniczo-Hutnicza, Poland
IFToMM 2006 Stabilization of a Rubbing Rotor Using a Robust Feedback Control H. Ulbrich, L.
Ginzinger*, Technical University of Munich, Germany
IFToMM 2006 Semi-Active Electromagnetic Dampers for the Dynamic Control of Rotors G. Genta,
P. Macchi, S. Carabelli, A. Tonoli, M. Silvagni, N. Amati*, M. Visconti, Politecnico di Torino, Italy
IFToMM 2006 Cross Coupled Bending Vibrations of Rotating Shaft Due to a Transverse Breathing
Crack A. C. Chasalevris*, C. A. Papadopoulos, University of Patras, Greece
IFToMM 2006 Crack Detectability Using On-Line Vibration Level Shift Monitoring: Application to
Horizontal Axis Power Generation Turbines H. Henry, F. Hasnaoui, EDF R&D, France; P. Verrier*,
EDF Basic Design Dept., France

www.rotordynamics.org/paperlists/IFTOMM.html 45/95
19:00, 30/11/2022 IFTOMM

IFToMM 2006 Dynamic States of Large Power Machine During Run-Down S. Banaszek*, The
Szewalski Institute of Fluid-Flow Machinery, PASci., Poland
IFToMM 2006 The Stability of Automatic Ball Balancers K. Green, Vrije Universiteit Amsterdam,
The Netherlands; M. I. Friswell*, A. R. Champneys, N.A.J. Lieven, University of Bristol, UK
IFToMM 2006 Theoretical and Experimental Investigations on Rapid Run-Up/Down of Rotating
Machinery A. Allezy*, A. Al Majid, R. Dufour, INSA de Lyon, France
IFToMM 2006 Application of Vibration and Rotor Dynamic Analyses for Evaluation of Amplitude
Hysteresis at First Mode for a Generator Rotor in a High-Speed Balancing Facility M. M. L’vov*, W.
C. Gardner, Siemens Power Generation, Inc., USA; E.V. Uriev, Ural State Technical University,
Russia
IFToMM 2006 Standardization of Roulettes: A Rational and Scientific Approach P. Pennacchi, A.
Caprioli*, A. Cigada, Politecnico di Milano, Italy; S. Locatelli, , ItalianCasinò Srl, Italy
IFToMM 2006 Transient Response of Rotor on Rolling Element Bearings with Clearance D. P.
Fleming*, NASA Glenn Research Center, USA; B. T. Murphy, RMA, Inc., USA; J. T. Sawicki, Cleveland
State University, USA; J. V. Poplawski, J. V. Poplawski and Associates, USA
IFToMM 2006 Roll Vibration Analysis with Nip Contact L. Yuan, V.M. Järvenpää*, E. Keskinen,
Tampere University of Technology, Finland
IFToMM 2006 Some Interesting Features of Rotors Supported in Aerodynamic Bearings J. Šimek*,
TECHLAB Ltd., Czech Republic; J. Kozánek, IT AV CR, Czech Republic; M. Šafr, CKD NOVÉ ENERGO,
Czech Republic
IFToMM 2006 Effect of the Orbit Shape on the Experimental Measurement of a Three Lobe Air
Bearing R. O. Ruiz, M. Di Liscia, S. E. Diaz*, Universidad Simón Bolívar, Venezuela
IFToMM 2006 The Influence of Memory Effects of Journal Bearing Lubricant on its Dynamics
Behavior E. Malenovsky*, F. Pochyly, Brno University of Technology, Czech Republic
IFToMM 2006 New Model and Stationary Position for a Short Journal Bearing with Upper Point
Injection Port V.R. Nosov, J. Gómez-Mancilla*, I. Ramírez-Vargas, SEPI-ESIME Zacatenco, Instituto

www.rotordynamics.org/paperlists/IFTOMM.html 46/95
19:00, 30/11/2022 IFTOMM

Polytecnico Nacional, México

IFToMM 2006 Calculation of Characteristics of One Type of a Hybrid Hydrodynamic Bearing L.
A.Savin, O.V. Solomin*, A.S. Sidorenko, Orel State Technical University, Russia
IFToMM 2006 Validating a Steam Whirl Design Procedure for Steam Turbine - Generator Sets for
Power Generation J. Schettel*, B. Lüneburg, Siemens AG, Germany; M. Deckner, TU München,
Germany; H. Mynott, Siemens AG, Germany
IFToMM 2006 Optimum Design of Labyrinth Seal Composed of Arbitrary Seal Component M.
Matsuda*, T. Iwatsubo, Kansai University, Japan; H. Mochida, Shinmaywa Industries, Ltd., Japan
IFToMM 2006 Swirl Breaking Devices and Their Effectiveness in Reducing Rotor Instability R.
Subbiah*, V. Choudhry, Siemens Power Generation Inc., USA
IFToMM 2006 Rotors under Seismic Excitation : A Spectral Approach L. Bachelet*, N. Driot, G.
Ferraris, LDMS Insa de Lyon, France
IFToMM 2006 On the Influence of Soil Stratification Profiles on Rotor-Foundation Unbalance
Response E. Mesquita*, K.L. Cavalca, D.A. Ramalho, L.H.Thomazo, Unicamp, SP Brazil
IFToMM 2006 Experimental Investigation of Dynamic Instability of Supercritical Driveshafts Due
to Internal Damping O. Montagnier*, Centre de Recherche de l’Ecole de l’Air, France; C. Hochard,
Laboratoire de Mécanique et d’Acoustique, France
IFToMM 2006 Dynamic Stability of Internally Damped Multibearing Rotors Using Finite Elements
L. Forrai*, University or Miskolc, Hungary
IFToMM 2006 Hybrid Meta-Heuristic Method Applied to Parameter Estimation of a Non-Linear
Rotor-Bearing System H.F. Castro, K. L. Cavalca*, Unicamp, SP Brazil
IFToMM 2006 FEM-Simulation and Stability Analyses of High Speed Rotor Systems J. Fischer*, J.
Strackeljan, Otto-von-Guericke-Universität Magdeburg, Germany
IFToMM 2006 Materials and Operational Imperfections in Rotating Machinery J. Kicinski*, Polish
Academy of Sciences, Poland
IFToMM 2006 Comparison of Damping Ratio Estimation Techniques for Flexural Rotor Modes of

www.rotordynamics.org/paperlists/IFTOMM.html 47/95
19:00, 30/11/2022 IFTOMM

a Cage Induction Motor T.P. Holopainen*, ABB Automation Products, Finland; C. H. Cloud, G. Li,
University of Virginia, USA; S.A. Aatola, Technical Research Centre of Finland, Finland
IFToMM 2006 Influence of Rotor Unbalance and Gear Eccentricity on Stator Vibration and Noise
M. Hajzman*, V. Zeman, University of West Bohemia in Pilsen, Czech Republic
IFToMM 2006 Investigation on the Dynamic Characteristics of a Magnetorheological Squeeze-
Film Damper for the Design of a Classical Rotor Control Strategy C. Carmignani, P. Forte, P.
Badalassi*, University of Pisa, Italy
IFToMM 2006 Some Studies on Misalignment In Rigidly Coupled Flexible Rotors A.W. Lees*,
University of Wales Swansea, UK
IFToMM 2006 Experimental and Numerical Investigations of a Counter-Rotating Coaxial Dual
Shaft Test Rig M. Guskov*, J.-J. Sinou, F. Thouverez, Ecole Centrale de Lyon, France; O.S. Naraikin,
Bauman Moscow State Technical University, Russia
IFToMM 2006 Case History and Analysis of the Spiral Vibration of a Large Turbogenerator Using
Three Different Heat Input Models L. Eckert*, Turbogenerator R&D ALSTOM (Switzerland) Ltd.,
Switzerland; J. Schmied, DELTA JS AG, Switzerland; A. Ziegler, Turbogenerator R&D ALSTOM
(Switzerland) Ltd., Switzerland
IFToMM 2006 Dynamical Behaviour of a Turbogenerator Set in Accidental Conditions: About a
Simplified Method for the Determination of Maximal Bearing Loads S. Audebert*, C.M. Stoisser,
J.-C. Clément, Electricité de France, France
IFToMM 2006 Design of a New 3D Blade for an Intermediate Pressure Steam Turbine E. Pesatori,
G. Turozzi*, F. Frattaroli, Franco Tosi Meccanica S.p.A., Italy; P. Pennacchi, Politecnico di Milano,
Italy
IFToMM 2006 Vibration Analysis of a Compressor Impeller With Splitter Blades B. Irwanto*, H.-J.
Hardtke, Technical University of Dresden, Germany
IFToMM 2006 Forced Response Analysis of Blisks with Friction Ring Dampers D. Laxalde*, F.
Thouverez, J.-J. Sinou, Ecole Centrale de Lyon, France ; J.-P. Lombard, Snecma-Safran Group,

www.rotordynamics.org/paperlists/IFTOMM.html 48/95
19:00, 30/11/2022 IFTOMM

France
IFToMM 2006 Transient Response Simulation of Shaft/Seal Rubs in a Rotor Supported by Non-
Linear Hydrodynamic Forces M. B. Aquino*, Unicamp, SP Brazil; R. Nordmann, TU-Darmstadt,
Germany; R. Pederiva, Unicamp, SP Brazil
IFToMM 2006 Rotor Dynamics Analysis of Failure Due to Rotor-Stator Contact in an Overhung
Rotor J-O. Aidanpää*, Luleå University of Technology, Sweden
IFToMM 2006 Modeling of Rotor Speed Transient with Rotor-to Stator Contact S. Roques*, Ecole
Centrale de Nantes, France; C. M. Stoisser, EDF R&D, France; P. Cartraud, M. Legrand, B. Peseux,
Ecole Centrale de Nantes, France; C. Pierre, McGill University, Canada
IFToMM 2006 Influence of Internal Damping on Run-up and Run-down Processes of Rotors K.
Bernert*, R. Markert, Darmstadt University of Technology, Germany; H.I. Weber, Pontificia
Universidade Catolica, Brazil
IFToMM 2006 Gyro Dynamics for New Wave Power Generation System H. Kanki*, Kobe
University, Japan; S. Arii, Tottori University, Japan; T. Hata, Kobe University, Japan
IFToMM 2010 Alternative Approaches to Design Balancing Filters for the Improvement of Model-
Based Fault Diagnosis P. Beckerle, H. Schaede, and S. Rinderknecht, (Technische Universität
Darmstadt, Germany)
IFToMM 2010 Error Analysis of a New Cylindrical Capacitive Sensor for Measuring Five-
Dimensional-Motions of a Rotor H. J. Ahn (Soongsil University, Korea) and S. Jeon (University of
Waterloo, Canada)
IFToMM 2010 Continuous Wavelet Time-Division Scale Level Moment Quantitative Approach for
Vibration Analysis of Rotating Machinery T. Yang, F. Chen, Y. Zhang, G. Wei, S. Huang, and P.
Zhang (Huazhong University of Science and Technology, China)
IFToMM 2010 Condition Monitoring System J. S. Rao, K. Swaroop, N. Rangarajan, and S.
Mantrawadi (Altair Engineering India Pvt Ltd, India)
IFToMM 2010 Comparative Study on Frequency-speed Diagrams in Rotating Machinery C. W. Lee

www.rotordynamics.org/paperlists/IFTOMM.html 49/95
19:00, 30/11/2022 IFTOMM

(KAIST, Korea)
IFToMM 2010 Influence of Tilting Pad Journal Bearing Models on Rotor Stability Estimation C. H.
Cloud (BRG Machinery Consulting, United States), E. H. Maslen (James Madison University,
United States), and L. E. Barrett (University of Virginia, United States)
IFToMM 2010 The Application of Fuzzy Random Finite Element Method on Rotor Dynamics H.
Yao, Q. Han, and B. Wen (Northeastern University, China)
IFToMM 2010 Rotordynamic Characteristics of Large Locomotive Turbochargers W. J. Chen (Eigen
Technologies, Inc., United States)
IFToMM 2010 Dynamic Analysis and Control of Rigid Rotor Supported by Noncollocated Active
Magnetic Bearings H. W. Jeon, C. W. Lee (KAIST, Korea), and S. J. Kim (Korea Institute of Science
and Technology, Korea)
IFToMM 2010 Stability Analysis of Foil Journal Bearings Considering Coulomb Friction D. H. Lee
(University of Texas at Arlington, United Sates), Y. C. Kim (Korea Institute of Machinery and
Materials, Korea), and K. W. Kim (KAIST, Korea)
IFToMM 2010 Nonlinear Characterization of an Elastohydrodynamic Point Contact under
Harmonic Loading F. Nonato (Schaeffler Brasil Ltda, Brazil) and K. L. Cavalca (University of
Campinas, Brazil)
IFToMM 2010 Oil Induced Instability: Analytic Study and Experimental Verification on Fexible
Rotor Supported by a Journal-Bearing at One End J. C. Luneno, J. O. Aidanpää (Luleà University of
Technology, Sweden), and R. K. Gustavsson (Vattenfall Research and Development AB, Sweden)
IFToMM 2010 Non-Synchronous Tilting Pad Beraing Characteristics J. Schmied (DELTA JS AG,
Switzerland), A. Fedorov, and B. S. Grigoriev (Saint-Petersburg State Polytechnical University,
Russian Federation)
IFToMM 2010 Asymmetrical Heating in a Tilting Pad Journal Bearing Causing Shaft Bending B. S.
Grigoriev, A. Fedorov (Saint-Petersburg State Polytechnical University, Russian Federation), and J.
Schmied (DELTA JS AG, Switzerland)

www.rotordynamics.org/paperlists/IFTOMM.html 50/95
19:00, 30/11/2022 IFTOMM

IFToMM 2010 Evaluation of Damping Ratio of Oil-Film Bearing System by Using Modal Open
Loop Transfer Function H. Fujiwara, 0. Matsushita, and H. Oyama (National Defense Academy,
Japan)
IFToMM 2010 Experimental Evaluation of Error Propagation in Rotor-Model- Based Identification
of Foundations in Rotating Machinery L. U. Medina (Universidad Simon BolIvar, Venezuela), N.
Feng, and E. J. Hahn (The University of New South Wales, Australia)
IFToMM 2010 Real Time Decomposition of Disk Vibrations I. Bucher (Technion, Israel)
IFToMM 2010 Co-Variance Driven Stochastic Subspace Identification Approach for
Rotordynamics M. Karlsson, H. Samuelsson (Lloyd’s Register ODS, Sweden), and M. Karlberg
(Luleà University of Technology, Sweden)
IFToMM 2010 Modeling and Analysis of Rotor with Laminated Core in Electric Machine Y. H. Seo,
J. M. Lee, W. H. Kim and S. M. Lee (Hyundai Heavy Industries, Korea)
IFToMM 2010 Estimation of Stator Windings Modal Parameters in Power Generation Turboset T.
Barszcz, J. Urbanek, and T. UhI (Akademia GOrniczo-Hutnicza University of Science and
Technology, Poland)
IFToMM 2010 Validation of a 3D Contact Algorithm for the Study of BladeTiplCasing Contacts in
Turbomachines A. Batailly (McGill University, Canada), B. Magnain (ENSIB-Institut PRISME,
France), M. Legrand, and C. Pierre (McGill University, Canada)
IFToMM 2010 Dynamics of Flexible Rotors Supported on Elastomer Bearings A. Scholz, R. Liebich
(Berlin Institute of Technology, Germany), G. Paysan, and R. Blutke (Rolls-Royce Deutschland
Limited & Co KG, Germany)
IFToMM 2010 Studies on Dynamical State Stability of the Aero-engine Rotor Joint Structures S.
Liu, Y. Ma, and J. Hong (Beijing University of Aeronautics and Astronautics, China)
IFToMM 2010 A Complete Rotordynamic Analysis of a Rotor-Disk System Using Finite Element
Method J. Chaudhry, M. Wagner, F. He, A. Younan, T. Dimond, J. Cao, and P. Allaire (University of
Virginia, United States)

www.rotordynamics.org/paperlists/IFTOMM.html 51/95
19:00, 30/11/2022 IFTOMM

IFToMM 2010 Complex Response of a Rotor-Bearing-Foundation System P. M. Santana, K. L.

Cavalca, E. P. Okabe, and T. H. Machado (University of Campinas, Brazil)
IFToMM 2010 Rotor Dynamics in Dimensionless Quantities Part I - Static Unbalance A. Zhivotov
and Y. Zhivotov (Yuzhnoye State Design Office, Ukraine)
IFToMM 2010 Development of an Efficient Simulation Model for Rotors in Hydrodynamic
Bearings Including Fluid-Induced Instability and Gyroscopic Effects B. Riemann (Technische
Universität Darmstadt, Germany), H. F. D. Castro, K. L. Cavalca (University of Campinas, Brazil), R.
Nordmann, and S. Rinderknecht (Technische Universität Darmstadt, Germany)
IFToMM 2010 Fatigue Analysis of a Gas Turbine Rotating Blade with Thermal Barrier Coating R.
Garcia-Illescas and Z. Mazur C. (Mexican Electric Research Institute, Mexico)
IFToMM 2010 Modified Empirical Mode Decomposition Process for Improved Fault Diagnosis A.
Parey and R. B. Pachori (Indian Institute of Technology Indore, India)
IFToMM 2010 New Perspectives of Oil Whirl and Oil Whip Mechanisms in Rotating Machinery R.
Subbiah (Siemens Energy, United States)
IFToMM 2010 Transient Rubs in Turbomachinery and Their Impact on Revolution Speed 0. M. V.
Bargen, P. Kalinowski, and R. Liebich (Technische Universität Berlin, Germany)
IFToMM 2010 Unbalance Identification in Nonlinear Rotors T. S. Morais, V. Steffen Jr (Federal
University of Uberlandia, Brazil), J. Mahfoud, and J. D. Hagopian (Institut National de Sciences
Appliquées de Lyon, France)
IFToMM 2010 Stability Analysis of Rotors Supported by Floating Ring Bearings A. Boyaci, W.
Seemann, and C. Proppe (Karlsruhe Institute of Technology, Germany)
IFToMM 2010 Crack Detection in a Steam Turbine: A Case History A.Vania and N.Bachschmid
(Politecnico di Milano, Italy)
IFToMM 2010 On the Evolution of Vibrations in Cracked Rotors N. Bachschmid, P. Pennacchi, and
E. Tanzi (Politecnico di Milano, Italy)
IFToMM 2010 Crack Detection Using Reverse MISO Technique: Nonlinear Analysis S. W. Kang and

www.rotordynamics.org/paperlists/IFTOMM.html 52/95
19:00, 30/11/2022 IFTOMM

C. W. Lee (KAIST, Korea)

IFToMM 2010 Torsional Stiffness Modeling and Vibration Simulation of 2- Pole Turbogenerator
Rotor B. Irwanto and T. Prothmann (Aistom, Switzerland)
IFToMM 2010 Study on Torsional Vibration of Turbine Generator Shafts Owning to Network
Disturbance D. Jiang, C. Liu, and J. Chen (Tsinghua University, China)
IFToMM 2010 Dynamics of Model Bladed Disc with Friction Elements for Vibration Suppression L.
Pesek, L. Pust, F. Vanek, J. Vesely and J. Cibulka (IT AS CR, v.v.i., Czech Republic)
IFToMM 2010 A New Way of Writing Motion Equations in Rotating Machines by Translation into
the Angular Domain A. Bourdon, H. André, and D. Rémond (Université de Lyon, France)
IFToMM 2010 Characterization and Commissioning of a Centrifugal Compressor Surge Control
Test Rig K. T. Lim, S. Y. Yoon, C. P. Goyne, Z. Lin, and P. Allaire (University of Virgina, United States)
IFToMM 2010 Automated Design Optimization of E-Core Active Magnetic Bearings T. Dimond
(University of Virginia, United States), T. Meriwether (National Ground Itelligence Center, United
States), J. Kaplan, R. Rockwell, and P. Allaire (University of Virginia, United States)
IFToMM 2010 Smart Properties of AMB Supported Machines for Rotor Crack Detection:
Experimental and Analytical Study Z. Kulesza (Bialystok University of Technology, Poland), J. T.
Sawicki, and D. L. Storozhev (Cleveland State University, United States)
IFToMM 2010 Analytical Methods of Sensors and Actuators Recollocation in Vibration Control
Systems Z. Gosiewski, Z. Kulesza, and F. Siemieniako (Bialystok University of Technology, Poland)
IFToMM 2010 Application of Robust Regression Methods to Fault Identification in Rotating
Machinery P. Pennacchi, S. Chatterton, R. Ricci, and A. Vania (Politecnico di Milano, Italy)
IFToMM 2010 Turbounit Overhaul Evaluation by Diagnostics and Vice Versa V. Barzdaitis
(KaunasUniversityof Technology, Lithuania), M. Bogdevicius (Vilnius Gediminas Technical
University, Lithuania), and R. Didizokas (Klaipèda University, Lithuania)
IFToMM 2010 Investigation of Blade Failure in a Gas Turbine Y. S. Choi (Sungkyunkwan University,
Korea) and K. H. Lee (Korea Failure Investigation Center, Korea)

www.rotordynamics.org/paperlists/IFTOMM.html 53/95
19:00, 30/11/2022 IFTOMM

IFToMM 2010 A New Diagnosis Method of Vibration Faults of Rotating Machinery Based on
Process F. Chen and S. Huang (Huazhong University of Science and Technology, China)
IFToMM 2010 Condition Monitoring of a Turboset by Measurement of Its Torsional Vibration T.
Barszcz, T. UhI, J. Urbanek (Akademia Górniczo-Hutnicza University of Science and Technology,
Poland), and B. Schmidt (EC Systems, Poland)
IFToMM 2010 Rotordynamic Linear and Nonlinear Stability Characteristics of a Medium-Size
High-Speed Turbocharger A. S. Lee and B. 0. Kim (Korea Institute of Machinery and Materials,
Korea)
IFToMM 2010 A Parametric Study on the Stability and Disturbance Rejection of Magnetically-
Levitated Flywheel Energy Storage Systems According to Inertia Ratios S. Y. Yoo (Chungnam
National University, Korea), W. R. Lee, Y. C. Bae (Korea Electric Power Research Institute, Korea),
and M. Noh (Chungnam National University, Korea)
IFToMM 2010 Rotordynamic Performance Measurement of an Oil-Free Turbocompressor
Supported on Gas Foil Bearings Y. B. Lee, S-B. Cho, T. Y. Kim, C. H. Kim, and T. H. Kim (Korea
Institute of Science and Technology, Korea)
IFToMM 2010 A Parametric Study of the Unbalance Response of an AeroEngine P. M. Hai and P.
Bonello (The University of Manchester, United Kingdom)
IFToMM 2010 A New Dimensionless Stability Map of Rotor Bearing System Allowing for
Manufacturing Tolerances Based on a Modified Summerfeld Number W. Xu (Guangxi University
of Technology, China), P. J. Ogrodnik , M. J. Goodwin, and G. A. Bancroft (Staffordshire University,
United Kingdom)
IFToMM 2010 Bifurcation of Periodic Motion of Rigid Rotor Ball Bearing System Considering Five
Degrees of Freedom L. Cui, C. Liu, and J. Zheng (East China University of Science and Technology,
China)
IFToMM 2010 Non-Synchronous Vibration of Jeffcott Rotor due to Internal Radial Clearance in
Roller Bearings J. Wu, M. Legrand, and C. Pierre (McGill University, Canada)

www.rotordynamics.org/paperlists/IFTOMM.html 54/95
19:00, 30/11/2022 IFTOMM

IFToMM 2010 Sensitivity Analysis of Squeeze Film Dampers Using Reynolds Equation A. 0.
Pugachev (Technische Universität München, Germany), V. V. Tykhomirov, A. V. Sheremetyev, 0. I.
Shpilenko, and I. D. Timchenko (SE lvchenko-Progress, Ukraine)
IFToMM 2010 A Lubrication Design Application of Spiral Groove Liquid Seal to the Carrier of
Vane-Type LPG Fuel Pump A. S. Lee and C. U. Kim (Korea Institute of Machinery and Materials,
Korea)
IFToMM 2010 Prediction of Leakage and Rotordynamic Coefficients for Annular-Type-Plain-Pump
Seal Using CFD Analysis B. S. Choe and T. W. Ha (Kyungwon University, Korea)
IFToMM 2010 Vibration Control of a Flexible Shaft Supported by a Hybrid Foil-Magnetic Bearing
S. N. Jeong, H. J. Ahn (Soongsil University, Korea), S. J. Kim, and Y. B. Lee (Korea Institute of
Science and Technology, Korea)
IFToMM 2010 Unbalance Compensation in Three-Pole Magnetic Bearing System by Extended
Influence Coefficient Method S. H. Park and C. W. Lee (KAIST, Korea)
IFToMM 2010 An Application of the Magneto-Rheological Actuators to Torsional Vibration Control
of the Rotating ElectroMechanical Systems T. Szolc, L. Jankowski (Polish Academy of Sciences,
Poland), A. Pochanke (Warsaw University of Technology, Poland), and A. Magdziak (Polish
Academy of Sciences, Poland)
IFToMM 2010 Design and Control of Hybrid Magnetic Bearing in a Flywheel Energy Storage
System W. Y. Kim, J. M. Lee, S. J. Kim, Y. B. Lee (Korea Institute of Science and Technology, Korea),
and Y. C. Bae (Korea Electric Power Research Institute, Korea)
IFToMM 2010 New Approach to the Numerical Analysis of the Swirl Water Turbine and
Experimental Verification E. Malenovsky, F. Pochyly, P. Rudolf, L. Pohanka, and M. Chlud (Brno
University of Technology, Czech Republic)
IFToMM 2010 Transient Impact Dynamics of Rotor Drop on Rolling-Element Backup Bearing in a
Flexible Rotor Supported on Active Magnetic Bearings C. Zhu (Zhejiang University, China)
IFToMM 2010 Non-Contact Gas Turbine Blade Vibration Measurement from Casing Pressure and

www.rotordynamics.org/paperlists/IFTOMM.html 55/95
19:00, 30/11/2022 IFTOMM

Vibration Signals-A Review G. L. Forbes and R. B. Randall (The University of New South Wales,
Australia)
IFToMM 2010 Transient and Modal Analysis of a Rotating Multi-packet Blade System having a
Crack S. M. Kwon and H. H. Yoo (Hanyang University, Korea)
IFToMM 2010 Multidisciplinary Technology for Blade Bending-Torsion Flutter Prediction J. M.
Temis (Central Institute of Aviation Motors, Russian Federation)
IFToMM 2010 Modelling and Design of Passive Damping of Turbine Blade Vibrations M. Hajxman,
M. Byrtus, V. Zeman, J. Kellner, and J. Sasek (University of West Bohemia, Czech Republic)
IFToMM 2010 Experimental and Numerical Analysis of the Forced Response of the Mistuned First
Stage Compressor Bladed Disc of an Aircraft Engine R. Rzadkowski (Institute of Fluid-Flow
Machinery, Poland), R. Szczepanik (Air Force Institute of Technology, Poland), M. Drewczyñski M.
Soliriski, A. Maurin, and A. Maciejewska (Institute of Fluid-Flow Machinery, Poland)
IFToMM 2010 Identification of the Unbalance Using Correlation Analysis and Unbalance
Responses F. D. Sanches and R. Pederiva (University of Campinas, Brazil)
IFToMM 2010 Thermal Image Analysis for Machine Fault Diagnosis A. M. Younus and B. S. Yang
(Pukyong National Univerity, Korea)
IFToMM 2010 Identification of Misalignment and Unbalance in Rotating Machinery using Multi-
Objective Genetic Algorithms L. W. F. D. Camargo, H. F. D. Castro, and K. L. Cavalca (University of
Campinas, Brazil)
IFToMM 2010 Analysis and Treatment of Oil Whirl on Ultra-Supercritical 1000MW Unit S. Liu
(Guangdong Power Test & Research Institute, China), J. Chen (Huaneng Haimen Electric Power
Co., LTd., China), F. Wang, Y. Feng, and H. Gu (Guangdong Power Test & Research Institute, China)
IFToMM 2010 Vibrations of Rotating Machinery due to Sudden Mass Loss P. Kalinowski, 0. V.
Bargen, and R. Liebich (Berlin Institute of Technology, Germany)
IFToMM 2010 Dynamics Design of Rotor-Bearing System of High Speed Motorized Spindle S.
Jiang and S. Zheng (Southeast University, China)

www.rotordynamics.org/paperlists/IFTOMM.html 56/95
19:00, 30/11/2022 IFTOMM

IFToMM 2010 A Study on Dynamic Characteristics of Miniaturized Grinding Machine Tool Using
Order Tracking Analysis P. H. Lee, C. Li, Y. S. Choi, and S. W. Lee (Sungkyunkwan University, Korea)
IFToMM 2010 Effect Analysis of Journal Out-of-roundness on Dynamic Performances of Rotor
Bearing System P. J. Ogrodnik (Staffordshire University, United Kingdom), W. Xu (Guangxi
University of Technology, China), M. J. Goodwin, and G. A. Bancroft (Staffordshire University,
United Kingdom)
IFToMM 2010 A Numerical Procedure for Investigation of Efficiency of Short Magnetorheological
Dampers Used for Attenuation of Lateral Vibration of Rotors Passing the Critical Speeds J.
Zapomel and P. Ferfecki (VSB-Technical University of Ostrava, Czech Republic)
IFToMM 2010 Concise and Accurate Modelling of the Open Crack in Rotor Systems T. Inoue, N.
Nagata, and Y. Ishida (Nagoya University, Japan)
IFToMM 2010 Stability and Dynamics of a Rotor System with a Slant Crack on the Shaft F. Chu
and Y. Lin (Tsinghua University, China)
IFToMM 2010 Application of the Cohesive Zone Model for the Investigation of the Dynamic
Behavior of a Rotating Shaft with a Transverse Crack R. T. Liong and C. Proppe (Karisruhe
Institute of Technology, Germany)
IFToMM 2010 A Novel Normalization Procedure of Quadratic Coefficients in a Multi-Crack
Identification Algorithm for a Shaft System S. K. Singh, R. Tiwari, and S. K. Talukdar (Indian
Institute of Technology, India)
IFToMM 2010 Optimal Control of Chatter Vibrations of a Motor Spindle with Integrated
Electromagnetic Actuator B. Späh (Technische Universität Darmstadt, Germany), S. Kern
(Gleason-Pfauter Maschinenfabrik, Germany), R. Nordmann, and S. Rinderknecht (Technische Un
iversität Darmstadt, Germany)
IFToMM 2010 Investigations of Impact of Various Types of Mistuning on Bladed Disks Vibration
and Fatigue Life 0. Repetskiy, I. Ryzhikov (Irkutsk Sate Technical University, Russian Federation),
and R. Schmidt (Technical University of Dresden, Germany)

www.rotordynamics.org/paperlists/IFTOMM.html 57/95
19:00, 30/11/2022 IFTOMM

IFToMM 2010 Instability Control and Unbalance Compensation of Flexible Rotors Supported on
Journal Bearings Using Magnetic Bearings A. S. Dimitri and A. EI-Shafei (Cairo University, Egypt)
IFToMM 2010 Levitation and Multi-Mode Vibration Control of a Flexible Rotor by Using Active
Magnetic Bearings N. Uchiyamai, T. Watanabe, T. Nomoto(Nihon University, Japan), and K. Seto
(Seto Vibration Control Laboratory, Japan)
IFToMM 2010 Optimization of Controller Parameters of Active Magnetic Bearings Using Genetic
Algorithms D. J. Bordoloi and R. Tiwari (Indian Institute of Technology Guwahati, India)
IFToMM 2010 A Miniature High-Speed Spindle with Permanent Magnet- Biased Active Magnetic
Bearings S. K. Ro, W. C. Shin, J. H. Kyung, and J. K. Park (Korea Institute of Machinery and
Materials, Korea)
IFToMM 2010 The Dynamic Properties of the Micro-Rotor Supported on Fluid-Film Bearings J.
Kicinski, G. Zywica, (Polish Academy of Sciences, Poland), and W. Miaskowski (University of
Warmia and Mazury, Poland)
IFToMM 2010 Theoretical and Experimental Investigations of Oil-Free Support Systems to
Improve the Reliability of Industrial Turbomachinery Z. Kozanecki and D. Kozanecka (Techical
University of Lodz, Poland)
IFToMM 2010 Nonlinear Rotordynamic Analysis and Test Response of 100KW Micro Gas
Turbogenerator Supported on Floating Ring Bearings N. Shen, Y. Jiao, Z. Chen, and W. Ma (Harbin
Institute of Technology, China)
IFToMM 2010 Rotor Dynamic Modelling as a Powerful Support Tool for Vibration Analysis on
Large Turbomachinery K. Matthys (Laborelec, Belgium), M. Perucchi (DELTA JS AG, Switzerland),
and K. D. Bauw (Laborelec, Belgium)
IFToMM 2010 The Unsteady Rotor Blade Forces for a Changing the Number of Stator Blades R.
Rzadkowski (Polish Academy of Sciences, Poland), V. Gnesin (National Ukraine Academy of
Sciences, Ukraine), M. Soliriski (Polish Academy of Sciences, Poland), and L. Kolodyazhnaya
(National Ukraine Academy of Sciences, Ukraine)

www.rotordynamics.org/paperlists/IFTOMM.html 58/95
19:00, 30/11/2022 IFTOMM

IFToMM 2010 Critical Speed Analysis of Gas Lubricated Bearing Rotor System Z. Fu, X. Liu (North
China Electric Power University, China), and J. Yang (Chinese Academy of Sciences, China)
IFToMM 2010 Axial Pedestal Vibration on Large Turbogenerators S. Yan (Siemens Energy,
Germany)
IFToMM 2010 Blade Loss Simulations of Bending Vibrations Applied to a 1750 MW Turbo
Generator Set P. Verrier, H. Martina, and S. Kohli-Lynch (Electricite de France, France)
IFToMM 2010 Dynamics of Compact Gas Turbine Rotor Supported by Gas Bearings J. M. Temis,
M. J. Temis, A. M. Egorov, and A. B. Meshcheryakov (Central Institute of Aviation Motors, Russian
Federation)
IFToMM 2010 On Model Updating of Turbo-Generator Set N. Bachschmid, R. Ricci, S. Chatterton,
and P. Pennacchi (Politecnico di Milano, Italy)
IFToMM 2010 Analytical Analysis of MIMO Magnetic Bearing-Rotor System Z. Gosiewski (Bialystok
University of Technology, Poland) Engineering Stability Criterion and Its Experimental
IFToMM 2010 Validation of Frequency Coupled Modulation for Sliding Rotor-Bearing System J.
Yang (Chinese Academy of Sciences, China), C. Chen (Army Aviation Institute, China), Y. Liu
(Liaoning Shihua University, China), and D. Han (Chinese Academy of Sciences, China)
IFToMM 2010 Study on Leakage in Labyrinth Seals System of a Turbine W. Ma, Z. Chen, Y. Jiao,
and N. Shen (Harbin Institute of Technology, China)
IFToMM 2010 Dynamics Alalysis of Rotor with Floating Rings Package Bearing Y. Rozhdestvenskiy,
A. Boyarshinov, E. Zadorozhnaiy, A. Fisher, P. Taranenko, and S. Cherneyko (South Ural State
University, Russian Federation)
IFToMM 2010 Early Detection of Rotor Cracks by Measuring the Coupled Response under
External Excitation A. C. Chasalevris and C. A. Papadopoulos (University of Patras, Greece)
IFToMM 2010 Nonlinear Simulation of Continuous Rotor Bearing Systems with Multi-Step
Geometry A. C. Chasalevris and C. A. Papadopoulos (University of Patras, Greece)
IFToMM 2010 Study on the Bifurcation and Stability of the Periodic Motion of a Cracked Rotor

www.rotordynamics.org/paperlists/IFTOMM.html 59/95
19:00, 30/11/2022 IFTOMM

Bearings System C. Liu, S. Zhou, X. Zhou, C. Xia, and J. Zheng (East China University of Science
and Technology, China)
IFToMM 2010 Rotordynamic Characteristics of 65kW Micro Turbine with Compliant Air Foil
Bearings K. S. Kim, B. C. Cho, and M. H. Kim (Neuros Co. Ltd., Korea)
IFToMM 2010 Comparison of Thermo-Hydrodynamic Characteristics of Airfoil Bearings with
Different Top Foil Geometries D. Kim, D. H. Lee (University of Texas at Arlington, United States), Y.
C. Kim, and K. Ahn (Korea Institute of Machinery and Materials, Korea)
IFToMM 2010 Integration Methodology for Oil-Free Shaft Support Systems: Four Steps to Success
S. A. Howard, C. DellaCorte, and R. J. Bruckner (The National Aeronautics and Space
Administration, United States)
IFToMM 2010 Five Degrees of Freedom Nonlinear Rotor Dynamics Model of Rigid Rotor
Supported by Multiple Airfoil Bearings D. H. Lee and D. Kim (University of Texas at Arlington,
United States)
IFToMM 2010 Measurements of Drag Torque, Lift Off Speed, and Structural Parameters in a 1st
Generation Floating Gas Foil Bearing L. S. Andrés (Texas A&M University, United States), J.
Camero (University of Texas at San Antonio United States), S. Muller (Calvin College, United
States), T. Chirathadam, and K. Ryu (Texas A&M University, United States)
IFToMM 2010 Electromechanical Interactions of a Variable Speed Drive Driven Compressor Train
M. Karisson (Lloyd’s Register ODS, Sweden), C. M. Myllerup (Lloyd’s Register ODS, Denmark), and
D. Chan (Lloyd’s Register ODS, China)
IFToMM 2010 Measurement and Simulation of Forced Torsional Vibration with Inter-Harmonic
Frequencies in Variable Speed Drive Motor Driven Compressor K. Tanaka (Hitachi Plant
Technologies, Ltd., Japan), H. Nemoto (Hitachi, Ltd., Japan), N. Takahashi, Y. Fukushima (Hitachi
Plant Technologies, Ltd., Japan), Y. Akita, and M. Tobise (Hitachi, Ltd., Japan)
IFToMM 2010 Rotordynamical Analysis of a Fourteen Pole Synchronous Generator due to
Whirling Dependent Electromagnetical Forces M. Karlsson (Lloyd’s Register ODS, Sweden), U.

www.rotordynamics.org/paperlists/IFTOMM.html 60/95
19:00, 30/11/2022 IFTOMM

Lundin (Uppsala University, Sweden), and J. O. Aidanpää (Luleà University of Technology,

Sweden)
IFToMM 2010 Design of an Active Hydromagnetic Journal Bearing M. G. Farmakopoulos, P. G.
Nikolakopoulos, and C. A. Papadopoulos (University of Patras, Greece)
IFToMM 2010 Fluttering Phenomena Caused by the Wrong Assembling of a Tilting-Pad Journal
Bearing P. Pennacchi, A. Vania, and S. Chatterton (Politecnico di Milano, Italy)
IFToMM 2010 Coupling Between Torsional and Transverse Vibrations in Geared Shaft-Trains P.
Pennacchi and A. Vania (Politecnico di Milano, Italy)
IFToMM 2010 Design of a Test-Rig for Traction Equipment of Very High Speed Trains P. Pennacchi,
S. Bruni, S. Chatterton, R. Ricci, P. Borghesani (Politecnico di Milano, Italy), F. Gherardi
(AnsaldoBreda SpA., Italy), D. Marinis, A. Didonato (Bombardier Transportation Italy SpA., Italy),
and F. Unger-Weber (Bombardier Transportation GmbH, Germany)
IFToMM 2010 Contribution to Compensation for Encoder Geometry in Time Interval Torsional
Vibration Measurement, Simulation and Experiment S. Braut, R. Zigulic, G. Stimac, and A. Skoblar
(University of Rijeka, Croatia)
IFToMM 2010 The Interplay of Linear and Nonlinear Modes on the Dynamics of a Rotorlstator
Contact System J. Jiang (Xi’an Jiaotong University, China)
IFToMM 2010 Resonance Capture of Rotor System Mounted on an Elastically Supported Base Q.
Han, X. Dong, and B. Wen (Northeastern University, China)
IFToMM 2010 Chaotic Vibration Responses of Continuous Rotating Flexible Shaft-Disk System
with Rub-Impact between Disk and Stator H. M. Khanlo, M. Ghayour, and S. Ziaei-Rad (Isfahan
University of Technology, Iran)
IFToMM 2010 Bifurcation Characteristics of Rub-impact Fault in Rotor Systems H. Ma, Y. Teng, B.
Wang, and B. Wen (Northeastern University, China)
IFToMM 2010 Modal Reduction of the Influence Coefficient Matrix for High Speed Balancing
Elastic Rotors K. Trukenmüller (Schenck RoTec GmbH, Germany)

www.rotordynamics.org/paperlists/IFTOMM.html 61/95
19:00, 30/11/2022 IFTOMM

IFToMM 2010 Residual Modal Unbalance Calculation Errors due to Influence Coefficient
Deviations and Improper Balance Plane Selection M. M. L'vov (Siemens Energy Inc., United
States) and E. V. Uryev (Ural State Technical University, United States)
IFToMM 2010 Vibration Analysis on Rotating Imperfect Structures S. Y. Choi and J. H. Kim (Seoul
National University, Korea)
IFToMM 2010 A Study of a Rotating System with Two Different Beam Elements and Bearings D.
Huber (Linz Center of Mechatronics GmbH, Austria), H. J. Holl (Johannes Kepler University of Linz,
Austria), M. Nader (Linz Center of Mechatronics GmbH, Austria), and H. G. V. Garben (Siemens
AG, Germany)
IFToMM 2010 Nonlinear Vibration Analysis of Discontinuous Coupled, Spinning Timoshenko
Beams S. Hubinger, H. Gattringer, H. Bremer (Johannes Kepler University Linz, Austria), and K.
Mayrhofer (Siemens VAI Metals Technologies Gmbh & Co, Austria)
IFToMM 2010 Closed-Form Expressions for Forces Acting on a Rapidly Rotating Floating Bearing
A. K. Belyaev (Institute of Problem in Merchanical Engineering, Russian Federation), M. Krommer,
and H. J. Holl (Johannes Kepler University Linz, Austria)
IFToMM 2010 Analysis of the Coupled Oscillations of Strip and Coiling Drum in a Winding Process
H. J. Holl (Johannes Kepler University Linz, Austria) and F. Hammelmuller (Linz Center of
Mechatronics GmbH, Austria)
IFToMM 2010 Finite-Element-Analysis of the Relative Shaft Displacements in the Sleeve Bearings
of a 2-pole Converter-Fed Induction Motor Concerning Excitation by Pulsating Torques U. Werner
(Siemens AG, Germany)
IFToMM 2010 Models for Constitutive Properties of Lamination Stack. Application to Different
Sizes Laminated Rotors G. Mogenier, T. N. Baranger, R. Dufour (University de Lyon, France), L.
Durantay, and N. Barras (Converteam SAS, France)
IFToMM 2010 Electromechanical Interaction in Torsional Vibrations of Drive Train Systems
Including an Electrical Machine T. P. Holopainen (ABB Machines, Finland), A. K. Repo (Konecranes,

www.rotordynamics.org/paperlists/IFTOMM.html 62/95
19:00, 30/11/2022 IFTOMM

Finland), and J. Järvinen (ABB Machines, Finland)

IFToMM 2010 Torsional Interaction Optimization in a LNG Train with a Load Commutated
Inverter S. D. Puglia, S. D. Franciscis (GE Oil & Gas, Italy), S. V. D. Moortel, P. Jörg (ABB,
Switzerland), T. Hattenbach (Bechtel Co., United States), D. Sgro, L. Antonelli (GE Oil & Gas, Italy),
and S. Falomi (University of Florence, Italy)
IFToMM 2010 Analysis on the Whirl Development of Heavy Duty Gas Turbine Rotor-Bearing
System Z. Wan, G. Meng, J. P. Jing, and H. Y. Bai (Shanghai Jiao Tong University, China)
IFToMM 2010 Equations of Motion and Stability Analysis of a LAVALRotor with Non-circular Shaft
Mounted in Anisotropic Bearings F. E. Boru and H. Irretier (Institute of Mechanics, Germany)
IFToMM 2010 Shaft Oscillations Under High-Frequency Vibration of Foundation. Self-Induce
Oscillations of Gyroscopic Rotors L. Y. Banakh and M. F. Zeytman (Mechanical Engineering
Research Institute, Russian Federation)
IFToMM 2010 Robust Design Optimization of the Vibrating Rotor Shaft System Subjected to
Rubbing Constrains R. Stocki, T. Szolc, P. Tauzowski, and J. Knabel (Polish Academy of Sciences,
Poland)
IFToMM 2010 Rotordynamics Characteristics and Vibration Reduction of an Industrial Decanter
Centrifuge B. 0. Kim and A. S. Lee (Korea Institute of Machinery and Materials, Korea)
IFToMM 2010 Theoretical Means of Hierarchical Systems for Design of Magnetic Bearings K.
Miatliuk, Z. Gosiewski, and F. Siemieniako (Bialystok Technical University, Poland)
IFToMM 2010 A Design Fitting of Journal Bearings to the LPLI Fuel Pump Application A. S. Lee and
C. U. Kim (Korea Institute of Machinery and Materials, Korea)
IFToMM 2010 Mechanical Damping Measurement of Small Size Hydrodynamic Bearing Rotors
without Physical Contact Y. S. lhn, J. C. Koo (Sungkyunkwan University, Korea), D. H. Oh
(Chungnam National University, Korea), C. S. Kim, and H. Y. Kim (Samsung Electronics, Korea)
IFToMM 2010 Theoretical Means of Hierarchical Systems for Design of Magnetic Bearings K.
Miatliuk, Z. Gosiewski, and F. Siemieniako (Bialystok Technical University, Poland)

www.rotordynamics.org/paperlists/IFTOMM.html 63/95
19:00, 30/11/2022 IFTOMM

IFToMM 2010 A Design Fitting of Journal Bearings to the LPLI Fuel Pump Application A. S. Lee and
C. U. Kim (Korea Institute of Machinery and Materials, Korea)
IFToMM 2010 Mechanical Damping Measurement of Small Size Hydrodynamic Bearing Rotors
without Physical Contact Y. S. lhn, J. C. Koo (Sungkyunkwan University, Korea), D. H. Oh
(Chungnam National University, Korea), C. S. Kim, and H. Y. Kim (Samsung Electronics, Korea)
IFToMM 2010 Stability Analysis of Rotating Composite Shafts Considering Internal Damping and
Coupling Effects T. N. Baranger, E. Chatelet, M. A. Andrianoely, and G. JacquetRichardet
(Université de Lyon, France)
IFToMM 2010 Nonlinear Rotordynamics of Vehicle Turbochargers: Parameters Affecting Sub
Harmonic Whirl Frequencies and Their Jump L. S. Andrés and A. Vistamehr (Texas A&M
University, United States)
IFToMM 2010 Fluid Force Moments Acting on the Backshroud of a Francis Turbine Runner in
Whirling and Precession Motions B. Song (Dalian University of Technology, China), H. Horiguchi
(Osaka University, Japan), Z. Ma (Dalian University of Technology, China), and Y. Tsujimoto (Osaka
University, Japan)
IFToMM 2014 Vibration Sensitivity of Large Turbine Generator Shaft Trains to Unbalance
Shuiping Yan, Roland Sievert
IFToMM 2014 Turbomachinery High Speed Modal Balancing: Modeling and Testing of Scale
Rotors Paola Forte, Matteo Bertoneri
IFToMM 2014 Application of Turbine Generator Train Rotordynamic Analysis for Setting Residual
Modal Unbalance Requirements for High Speed Balancing of a Single Rotor Max L'vov
IFToMM 2014 Development of a New Balancing Approach for Significantly Eccentric or Bowed
Rotors Zlatan Racic, Marin Racic
IFToMM 2014 Conditions Required for the Elimination of Trial Runs during the Balancing of
Flexible Rotors Eduardo Preciado
IFToMM 2014 Blade Vibration Measurements and Excitation Force Evaluation Nicolò Bachschmid,

www.rotordynamics.org/paperlists/IFTOMM.html 64/95
19:00, 30/11/2022 IFTOMM

Emanuel Pesatori, Simone Bistolfi, Steven Chatterton

IFToMM 2014 Influence of the Blades Configuration on the Dynamics of a 3-bladed Jeffcott Rotor
Florian Thiery, Jan-Olov Aidanpää
IFToMM 2014 Forced Vibration of Eight Mistuned Bladed Discs on a Solid Shaft - Excitation of the
Second Compressor Bladed Disc Artur Maurin, Romuald Rzadkowski, Ryszard Szczepanik
IFToMM 2014 Vibration Response Analysis of Mistuned Bladed Disk Consisting of Directionally
Solidified Blade Yasutomo Kaneko, Kazushi Mori, Hiroharu Ooyama
IFToMM 2014 The Influence of Blade Row Dynamics on Lateral and Torsional Shaft Vibrations in
Steam Turbines Nicolò Bachschmid, Giorgia Salvini, Ezio Tanzi, Emanuel Pesatori
IFToMM 2014 Explanation of the Snubbing Mechanism on Vibration Reduction by Means of
Chaos Metrics Steven Chatterton, Paolo Pennacchi, Andrea Vania
IFToMM 2014 Efficient Modelling of Rotor-blade Interaction using Substructuring Fadi Dohnal,
Eric Knopf, Rainer Nordmann
IFToMM 2014 Modeling Impulse Periodic Excitation of Blade Rows in Steam Turbines in Partial
Arc Admission Conditions Nicolò Bachschmid, Ezio Tanzi, Emanuel Pesatori, Simone Bistolfi
IFToMM 2014 An Improved Microslip Model for Variable Normal Loads Muzio Gola, Chiara
Gastaldi
IFToMM 2014 Nonlinear Behavior Analysis Caused by Blade Tip Rubbing in a Rotor-disk-blade
System Hui Ma, Zhiyuan Wu, Xingyu Tai, Chaofeng Li, Bangchun Wen
IFToMM 2014 The Resolution of Unwanted Vibrations in Rotating Machinery Gordon R. Kirk
IFToMM 2014 Designing & Operating Rotating Machinery Free from Vibration Troubles Based on
Case Studies Masato Tanaka
IFToMM 2014 Keyphasor Based Torsional Vibration Detection and Field Applications Huageng
Luo, Roengchai Chumai, Nicolas Peton, Arun Menon (presents Francesco Miniello)
IFToMM 2014 Behavior of Eccentric Rotors through the Critical Speed Range Zlatan Racic, Marin
Racic

www.rotordynamics.org/paperlists/IFTOMM.html 65/95
19:00, 30/11/2022 IFTOMM

IFToMM 2014 Analysis of dry friction-induced stick-slip in an experimental test rig modeling a
drill string Hans Ingo Weber, Bruno Cayres, Cesar da Fonseca, Adriano Santos
IFToMM 2014 Evaluation of Unexpected High Vibration on a High Speed Coupling Spacer Gordon
R. Kirk, K.A Schoeneck, E.A. Memmot
IFToMM 2014 Analysis of Super-synchronous, Sub-mesh Frequency Vibrations in a Speed
Increaser Gearbox C. Hunter Cloud, James M. Byrne, Minhui He, José A. Vázquez, Timothy J.
Hattenbach
IFToMM 2014 Optimization of Low Frequency Balancing of GD-40 Rotor Vladimir Shahrinov, Sliva
Oleg
IFToMM 2014 Analysis and Experimental Test of a 200 kW Oil- free Micro Gas Turbine Simulator
Bonjin Koo, Changho Kim, Jong Sung Lee, Tae Ho Kim, Kyuho Sim, Changho Kim, Maryna Ienina
IFToMM 2014 FEM Analysis of the SIF in Rotating Shafts Containing Breathing Elliptical Cracks
Lourdes Rubio, Patricia Rubio, Belén Muñoz-Abella
IFToMM 2014 Damping in a Parametrically Excited Cracked Rotor Zbigniew Kulesza, Jerzy T.
Sawicki
IFToMM 2014 Experimental and Numerical Analysis of Transversal Open Cracked Shafts
Considering Beam Slenderness and Crack Depth Rafael García-Illescas, Julio C. Gómez-Mancilla,
Luigi Bregant
IFToMM 2014 Experimental Identification of Rotor Crack Forces Rajiv Tiwari, C. Shravankumar, A.
Mahibalan
IFToMM 2014 Experimental Analysis and Validation of a Vibration-based Technique for Crack
Detection in a Shaft María Jesús Gómez García, C. Castejón, J.C. García-Prada, J. López
IFToMM 2014 Tracking the Damage Level in Rolling Element Bearings Steven Chatterton, Paolo
Pennacchi, Andrea Vania, Pietro Borghesani
IFToMM 2014 Order Tracking under Run-up and Run-down Conditions Robert Bond Randall,
Michael D. Coats

www.rotordynamics.org/paperlists/IFTOMM.html 66/95
19:00, 30/11/2022 IFTOMM

IFToMM 2014 A Novel Procedure for the Selection of the Frequency Band in the Envelope
Analysis for Rolling Element Bearing Diagnostics Steven Chatterton, Paolo Pennacchi, Andrea
Vania, Pietro Borghesani
IFToMM 2014 Modelling Roller Bearing Dynamics Inducing Instantaneous Angular Speed
Variations Jose L. Gomez, Adeline Bourdon, Hugo André, Didier Rémond
IFToMM 2014 Non-linear Elasto-dynamic Model of Faulty Rolling Elements Bearing Michele
Cotogno, Enrico Pedrazzi, Marco Cocconcelli, Riccardo Rubini
IFToMM 2014 Architecture of the Monitoring System for Traction System Bearings of a Regional
Locomotive Steven Chatterton, Paolo Pennacchi, Andrea Vania, Pietro Borghesani
IFToMM 2014 Monitoring the Dynamic Behavior in Polar Domain for an Easier Diagnostic of
Rotating Machinery Jarir Mahfoud, Benjamin Defoy
IFToMM 2014 Building Asset Monitoring and Prognostics Systems using Cost Effective
Technologies for Power Generation Applications Preston Johnson
IFToMM 2014 Signal Processing Techniques for the Identification of Wheels' Imbalance in
Presence of Disturbances Marco Tarabini, Andrea Gironacci, Roberto Panzeri, Diego
Scaccabarozzi
IFToMM 2014 Software Package Performance Evaluation for Lyapunov Exponent and Others
Features of Signals Evaluating the Condition Monitoring of Nonlinear Dynamic Systems Julio C.
Gómez Mancilla, F. Andrea Pellegrino, L. Palacios-Pineda, V. Nosov
IFToMM 2014 Use of Chaos in the Diagnostics of Rolling Element Bearings Steven Chatterton,
Paolo Pennacchi, Andrea Vania, Pietro Borghesani
IFToMM 2014 Model Based Automated Diagnosis of Bearing Knock Faults in Internal Combustion
Engines Jian Chen, Robert Bond Randall
IFToMM 2014 Low Speed Bearings' Instantaneous Angular Speed Behavior Wael Moustafa, O.
Cousinard, F. Bolaers, K. Ait Sghir, J.P. Dron
IFToMM 2014 Instantaneous Angular Speed Analysis, Measurement Errors and Signal Filtering

www.rotordynamics.org/paperlists/IFTOMM.html 67/95
19:00, 30/11/2022 IFTOMM

Marco Spagnol, Luigi Bregant

IFToMM 2014 Optimisation of SVM Based Multi-Fault Classification with Evolutionary Algorithms
from Time Domain Vibration Data of Rolling Bearings Rajiv Tiwari, D.J. Bordoloi
IFToMM 2014 Fault Diagnosis and State Detection in Centrifugal Pumps - A Review of
Applications Philipp Beckerle, Hendrik Schaede, Stephan Rinderknecht
IFToMM 2014 Use of Acoustic Emissions for the Detection of Rub of Rotors Eoin Peter Carden,
Stefano Morosi
IFToMM 2014 Multi Fault Diagnosis of the Centrifugal Pump Using the Wavelet Transform and
Principal Component Analysis Ian Howard, Berli Kamiel, Kris McKee, Rodney Entwistle, Ilyas
Mazhar
IFToMM 2014 Impact Response Characterization as basis for Bearing Diagnostics and
Prognostics Andrea Sanchez Ramirez, Richard Loendersloot, Tiedo Tinga, Giuseppe D’Angelo
IFToMM 2014 Force Analysis due to Local Defect in Rolling Bearings for Fault Diagnosis Sidra
Khanam, N. Tandon, Jayanta Kumar Dutt
IFToMM 2014 Vibration-based Spall Size Tracking in Rolling Element Bearings Wade Smith,
Chongqing Hu, Robert Bond Randall, Zhongxiao Peng
IFToMM 2014 Prediction of Ultimate Coupling Torque during Transient Short-circuit Loads of
Electric Motors Timo P. Holopainen,
IFToMM 2014 Rotordyamic Analysis of a 2-pole Induction Motor Considering Magnetic Excitation
due to Dynamic Rotor Eccentricity During Startup Christian Bauer, Ulrich Werner
IFToMM 2014 Experimental Investigation of Structural Damping of Laminated Stacks of Electrical
Machine Rotors Marcel Clappier, Lothar Gaul
IFToMM 2014 Rotor Vibrations in Electrical Machines due to Electromagnetic Forces Mathias
Mair, Bernhard Weilharter, Katrin Ellermann
IFToMM 2014 Investigating Grid-induced Turbo-generator Vibrations: a Multidisciplinary
Challenge Koenraad De Bauw, Frits Petit, Kris Matthys, Sylvain Doucement

www.rotordynamics.org/paperlists/IFTOMM.html 68/95
19:00, 30/11/2022 IFTOMM

IFToMM 2014 Rotor Vibration Difference among the Single and the Combined Faults Composed
by Static Air-gap Eccentricity and Rotor Interturn Short Circuit Yu-Ling He, Fa-Lin Wang, Meng-
Qiang Ke, Gui-Ji Tang
IFToMM 2014 Experimental Unbalance Identification by means of Correlation Analysis and Model
Order Reduction Fabio Dalmazzo Sanches, Robson Pederiva
IFToMM 2014 Model-Based Fault Detection on a Non-Linear Rotor System Ramakrishnan Ambur,
Zhentao Wang, Sebastian Schittenhelm, Stephan Rinderknecht
IFToMM 2014 Fault Detection in a Rotating Machine by using the Electromechanical Impedance
Method Aldemir Ap Cavalini Jr, Roberto Mendes Finzi, Valder Steffen Jr
IFToMM 2014 Application of Bayesian Inference to Unbalance Identification in Rotors Helio Fiori
de Castro, Natalia Cezaro Tyminski
IFToMM 2014 Application of Multiple-Model Estimation Method to Rotor Fault Diagnosis Jianping
JingLin Jia, Zhiqiang Wang
IFToMM 2014 Application of a Model-based Method for Balancing a Large Steam Turbo-
generator Unit Ionel Nistor, Philippe Voinis, Mohamed-Amine Hassini, Romain Lacombe, Paolo
Pennacchi
IFToMM 2014 Unbalance Response Analysis of a Heavy Duty Gas Turbine-Generator with Rigid
Coupling Offset Jin Woong Ha, Dae Seok Jung
IFToMM 2014 Residual Unbalance Determination for Flexible Rotors at Operational Speed Eric
Knopf, Thomas Krüger, Rainer Nordmann
IFToMM 2014 Model Validation for Damage Identification and Determination of Local Damage
Dynamics Jerzy T. Sawicki, Ryan J. Madden, Alexander H. Pesch
IFToMM 2014 Experimental Estimation of Misalignment Effects in Rotor-Bearing-Coupling
Systems Rajiv Tiwari, Mohit Lal
IFToMM 2014 Dynamic Forced Performance of Short Length Open-ends Squeeze Film Damper
with End Grooves Sung Hwa Jeung, Luis San Andrés, Gary Bradley

www.rotordynamics.org/paperlists/IFTOMM.html 69/95
19:00, 30/11/2022 IFTOMM

IFToMM 2014 The Identification Method for Dynamic Characteristics Coefficients of Rotor Sliding
Bearing Based on System Lag Angle Guangfu Bin, Wang Longkai, Feng Kun, Li Xuejun
IFToMM 2014 Effect of Square-Dimple Size on Dynamic Characteristics of Textured Journal
Bearings Hiroyuki Yamada, Satoru Kaneko, Hiroo Taura
IFToMM 2014 Geometric Discontinuities Identification in Hydrodynamic Bearings Tiago H.
Machado, Katia Lucchesi Cavalca
IFToMM 2014 Measurement of Drag Torque, Lift Off Speed and Rotordynamic Force Coefficients
in a Shimmed BFB Joshua Norsworthy, Luis San Andrés
IFToMM 2014 Numerical Modeling of the Flow in the Squeeze Film Dampers by using CFD
Analysis Guang-hui Zhang, Zhen-lin Wang, Zhan-sheng Liu
IFToMM 2014 A Test Rig for Evaluating Tilting–pad Journal Bearing Characteristics Steven
Chatterton, Paolo Pennacchi, Phuoc Vinh Dang, Andrea Vania
IFToMM 2014 Development and Preliminary Validation of Efficient 3D Models of Tilting Pad
Journal Bearings Enrico Meli, Roberto Conti, Amedeo Frilli, Emanuele Galardi, Daniele Nocciolini,
Luca Pugi, Andrea Rindi, Stefano Rossin
IFToMM 2014 Identification Dynamic Force Coefficients of a Five–pad Tilting–pad Journal Bearing
Steven Chatterton, Paolo Pennacchi, Phuoc Vinh Dang, Andrea Vania
IFToMM 2014 Construction and Experimental Application of a Variable Geometry Journal Bearing
(VGJB) for the Vibration Suppression of Rotors Athanasios Chasalevris, Fadi Dohnal
IFToMM 2014 The Effects of Temporal Fluid Inertia on Tilting Pad Journal Bearing Dynamics
Minhui He, C. Hunter Cloud, José A. Vazquez
IFToMM 2014 Multiphysics TEHD Model of a Tilting-pad Thrust Bearing with Polymeric Layer
Steven Chatterton, Paolo Pennacchi, Andrea Vania
IFToMM 2014 Efficient Thrust Bearing Model for High-Speed Rotordynamic Applications Ioannis
Chatzisavvas, Aydin Boyaci, Bernhard Schweizer
IFToMM 2014 Performances Degradation of Tilting-pad Thrust Bearings due to Electrical Pitting

www.rotordynamics.org/paperlists/IFTOMM.html 70/95
19:00, 30/11/2022 IFTOMM

Steven Chatterton, Paolo Pennacchi, Andrea Vania

IFToMM 2014 A New Approach to Solve for Oil-Whirl and Oil-Whip Limit-Cycle Response Min
Zhang
IFToMM 2014 Dynamic Analysis of Rotors Supported on Journal Bearings by Solving Reynolds
Equation Using Pseudospectral Method Sudhakar Gantasala, I.R. Praveen Krishna, A.S. Sekhar
IFToMM 2014 Influence of delayed yielding of magnetorheological oils in squeeze film dampers
on the vibration attenuation of rotors Jaroslav Zapomel, Petr Ferfecki
IFToMM 2014 Successful Elimination of a Pad-fluttering Phenomenon Andrea Vania, Paolo
Pennacchi, Steven Chatterton
IFToMM 2014 Investigation of the Thermal Effects of Tilting Pad Bearing Interacting with Fluid
Seals on the Stability of Rotating Systems Gregory Bregion Daniel, Antonio Carlos S. G. P.
Carneiro, Katia Lucchesi Cavalca
IFToMM 2014 Geometrical Optimization of Hydrodynamic Journal Bearings with Validated
Simulations and Artificial Intelligence Tools Luca Gorasso, Liqin Wang, Chiara Gorasso
IFToMM 2014 A Theoretical Study on Frequency Effects on Tilting-Pad Journal Bearing Dynamic
Coefficients Thomas Hagemann, Hubert Schwarze
IFToMM 2014 Stability Analysis of an Unbalanced Journal Bearing with Nonlinear Hydrodynamic
Forces Radhouane Sghir, Mnaouar Chouchane
IFToMM 2014 Nonlinear Oscillations of High-Speed Rotor Bearing Systems in Semi-Floating Ring
Bearings Aydin Boyaci, Bernhard Schweizer
IFToMM 2014 Influence of Bearing Geometry of Automotive Turbochargers on the Nonlinear
Vibrations during Run-up Elmar Woschke, Christian Daniel, Steffen Nitzschke, Stefan Göbel, Jens
Strackeljan
IFToMM 2014 Multilobe Floating Ring Bearings for Automotive Turbochargers Rob Eling, Ron van
Ostayen, Daniel Rixen
IFToMM 2014 Analysis of the Influence of Fluid Temperature Variation on the Behavior of

www.rotordynamics.org/paperlists/IFTOMM.html 71/95
19:00, 30/11/2022 IFTOMM

Turbocharger Lubricated Thrust Bearings Leonardo Carpinetti Vieira, Paula N. Watanabe, Katia
Lucchesi Cavalca
IFToMM 2014 Dynamics Analysis of Flexible Rotor Supported by Floating Ring Bearings Pavel
Taranenko, Oleg Sliva, Elena Zadorozhnaya
IFToMM 2014 Control of Rotor Motion Using Active Fluid-Film Bearings Leonid Savin, Denis
Shutin
IFToMM 2014 Thermal Effects in Hydrodynamic Cylindrical Bearings Diogo Stuani Alves, Gregory
Bregion Daniel, Katia Lucchesi Cavalca
IFToMM 2014 Temperature Influence on the Behavior of a Magnetorheological Fluid Journal
Bearing Pantelis Nikolakopoulos, Dimitrios A. Bompos
IFToMM 2014 Test Rig Characterization and Dynamic Testing of a Smart Electro-Magnetic
Actuator Journal Integrated Bearing Aly El-Shafei, Antoine Dimitri, Tareq Saqr, Medhat El-Hakim
IFToMM 2014 Effects of Rough Bearing Surface on the Stochastic Dynamics of a Rotor-bearing
System subject to Random Fluid-induced Forces Zigang Li, Jun Jiang
IFToMM 2014 Experimental Study on Periodic Rubbing Fault of Gas Lubrication Bearings and
High Speed Rotors Jichao Bian, Zhongguang Fu, Jinfu Yang
IFToMM 2014 Non-linear Stability Analysis of a Modfi ed Gas Foil Bearing Structure Robert
Hoffmann, Tomasz Pronobis, Robert Liebich
IFToMM 2014 Thermal Studies on Foil Bearings with a Sliding Coating Made of Plastic Material
Grzegorz Zywica, Jan Kicinski, Pawel Baginski
IFToMM 2014 Parametric Study of Dynamic Analysis Focusing on the Foil Structure of a Gas Foil
Journal Bearing Bok Seong Choe, Se Na Jeong, Yong Bok Lee
IFToMM 2014 Static and Dynamic Analyses of a Rotor with Aerostatic Ceramic Porous Journal
Zilda de Castro Silveira, Luis Renato Chiarelli
IFToMM 2014 Fluid Flow and Thermal Features of Gas Foil Thrust Bearings at Moderate
Operating Temperatures Abdelrasoul Gad, Shigehiko Kaneko

www.rotordynamics.org/paperlists/IFTOMM.html 72/95
19:00, 30/11/2022 IFTOMM

IFToMM 2014 On the Dynamics of a Rigid Rotor with Static Unbalance Symmetrically Mounted in
Compliant Air Bearings Christoph Baum, Hartmut Hetzler, Wolfgang Seemann
IFToMM 2014 The Dynamics of the Laboratory Rotor Founded on the Gas Foil Bearings -
Numerical Analysis Slawomir Banaszek, Grzegorz Zywica, Jan Kicinski, Malgorzata Bogulicz
IFToMM 2014 Numerical and Experimental Investigation of Rotor-simulator in Foil Gasdynamic
Bearings for Compact Gas Turbine Mikhail Temis, Joury Temis, Andrey Egorov, Valentin Gavrilov
IFToMM 2014 Prediction of Stiffness Coefficients for Foil Air Bearings to Perform Rotordynamic
Analysis of Turbomachinery Alexander O. Pugachev, Y.A. Ravikovich, Y.I. Ermilov, A.A. Matushkin,
D.P. Kholobtsev
IFToMM 2014 Externally Pressurized Gas Journal Bearings with Asymmetric Gas Supply
(Verification of Availability of Gas Pressure Control Using a Small Size Test Rig) Tomohiko Ise,
Kazuya Imanishi, Toshihiko Asami, Tomohiro Ishikawa, Naoyuki Takada, Fumiyoshi Kimura,
Yoshiyuki Yamaguchi, Takahiro Tokumiya
IFToMM 2014 On the Diagnostics of Planet Gear Bearings Gianluca D'Elia, Marco Cocconcelli,
Emiliano Mucchi, Giorgio Dalpiaz
IFToMM 2014 Dynamic Characterization of Wind Turbine Gearboxes in Operational Conditions
Simone Manzato, E. Di Lorenzo, F. Vanhollebeke, S. Goris, B. Peeters, W. Desmet, F. Marulo
IFToMM 2014 The Torsional Stiffness of Involute Spur Planetary Gears Ian Howard, Song Xue,
Rodney Entwistle, Ilyas Mazhar
IFToMM 2014 Planet Eccentricity Error on a Planetary Gear Transmission: Influence on Load
Sharing Miguel Iglesias, A. Fernández, A. de Juan, A. Díez, P. García, F. Viadero
IFToMM 2014 Dynamic Modelling of Gear System with Gyroscopic Effect and Crack Detection
Analysis Omar D. Mohammed, Matti Rantatalo, Jan-Olov Aidanpää
IFToMM 2014 Study on Nonlinear Meshing Stiffness of Spline Guang Zhao, Juncong Su, Jingyu
Zhai, Qingkai Han, Yanyan Shi
IFToMM 2014 Research on Dynamic Modeling and Analysis of the Coupled Planetary Gear and

www.rotordynamics.org/paperlists/IFTOMM.html 73/95
19:00, 30/11/2022 IFTOMM

Rotor System Hong-Liang Yao, Yang Liu, Zhao-Hui Ren, Bang-Chun Wen, Chao-Feng Li
IFToMM 2014 Rotordynamic Analysis for Integrally Geared Air Compressor using Measured
Dynamic Coefficients of Tilting Pad Journal Bearings Wonhyun Kim, Taeyoung Kim, Dohyeong
Lim, Sangpyo Woo, Wonho Joo
IFToMM 2014 Effect of Gear Tooth Breakage on the Dynamic Response in a Wind Turbine Drive
Train Subjected to Stochastic Load Excitation Srikanth Poludasu, A.S. Sekhar
IFToMM 2014 Rotor Active Vibration Control via Internal Magnetic Bearings and a Concentric
Inner Shaft Coupling Christopher Lusty, M. Necip Sahinkaya, Patrick S. Keogh
IFToMM 2014 Vibration Control of Rotor Shaft Systems Using Electromagnetic Actuator Shivang
Shekhar, Nitish Sharma, Hemanta Kumar Roy, Anindya Sundar Das, Jayanta Kumar Dutt
IFToMM 2014 Experimental Estimation of Speed-dependent Active Magnetic Bearing
Rotordynamic Parameters Rajiv Tiwari, Talatam Viswanadh
IFToMM 2014 Stability study for vibration control of an active magnetic bearing supported rotor
mounted on a moving base Akash Vardhan, Anindya Sundar Das, Jayanta Kumar Dutt
IFToMM 2014 Eigenvalue Assignment for Stabilizing Unstable Conical Modes of Rigid Rotor-active
Magnetic Bearing System over High Rotational Speed Range Han-Wook Jeon, Chong-Won Lee
IFToMM 2014 Rotordynamic Behavior and Performance of Controllable Hybrid Foil-magnetic
Bearing Sena Jeong, Bok Seong Choe, Yong Bok Lee
IFToMM 2014 Passive Magnetic Bearings at the Rotary Application Krzysztof Falkowski,
Aleksander Olejnik
IFToMM 2014 Dynamic Analysis of the High-speed Flexible Rotors Supported on the Electro-
dynamic Passive Magnetic Bearings Tomasz Szolc, Krzysztof Falkowski
IFToMM 2014 Experimental Assessment of Touchdown Bearing Contact Forces in Magnetic
Bearing Systems Patrick S. Keogh, Fawaz Y. Saket, M. Necip Sahinkaya
IFToMM 2014 A Contact Event Model for an AMB-supported Rotor Oskari Halminen, Antti
Kärkkäinen, Jussi Sopanen, Aki Mikkola

www.rotordynamics.org/paperlists/IFTOMM.html 74/95
19:00, 30/11/2022 IFTOMM

IFToMM 2014 Internal Sensing and Actuation Strategies for Smart Machine Rotors Samuel
Jimenez, Patrick S. Keogh, Matthew O.T. Cole
IFToMM 2014 Energy Harvesting from Unbalance Response of Rotors Rodrigo Nicoletti, Marcus
Vinicius Vitoratti de Araujo
IFToMM 2014 Assessment of Numerical Model to Determination of Parameters to Stability
Experimental Tests Felipe Wenzel Silva Tuckmantel, Gregory Bregion Daniel, Hélio Fiori de Castro,
Katia Lucchesi Cavalca
IFToMM 2014 Experimental Observations of Rotor Orbit Analysis in Rotating Machines Akilu
Yunusa-Kaltungo, Adrian D. Nembhard, Jyoti K. Sinha
IFToMM 2014 Experimental Study on the Dynamic Characteristics of Spline Joint in Rotor System
Wang Cun, Yanhong Ma, Dayi Zhang, Jie Hong
IFToMM 2014 Development and Validation of Efficient Rotordynamical Models for Complex
Rotating Systems Alice Innocenti, Filippo Cangioli, Lorenzo Marini, Enrico Meli, Luca Pugi, Andrea
Rindi
IFToMM 2014 Finite Element Modeling and Vibration Analysis of a Free Power Turbine Subjected
to Non-Synchronous Excitation Alexander O. Pugachev, A.V. Sheremetyev, V.V. Tykhomirov, O.I.
Shpilenko
IFToMM 2014 A Parameter Preserving Model Order Reduction Algorithm for Rotordynamic
Systems Kristin Krenek
IFToMM 2014 Analysis of Rotating Systems Using General-Purpose Multibody Dynamics
Alessandro Tasora, Pierangelo Masarati
IFToMM 2014 Capturing the Dynamics of Rotating Machines : a Modern Global Approach Based
on Samcef Rotor Patrick Morelle
IFToMM 2014 Dynamic Absorbers for Rotating Machinery Pietro Borghesani, Tommaso Argentini,
Marco Belloli, Fabio C. Robustelli
IFToMM 2014 Vibration Control in Electrical Machines Using Built-in Actuator Karuna Kalita,

www.rotordynamics.org/paperlists/IFTOMM.html 75/95
19:00, 30/11/2022 IFTOMM

Gaurav Kumar, Sivaramakrishnan Natesan, Kari Tammi

IFToMM 2014 Application of Optimization Methods in Rotor Dynamics Nils Wagner, Reinhard
Helfrich
IFToMM 2014 Active Vibration Isolation of a Flexible Rotor Being Subject to Unbalance Excitation
and Gyroscopic Effect Using H8-Op??mal Control Fabian Benedikt Becker, Stefan Heindel,
Stephan Rinderknecht
IFToMM 2014 A State Space Viscoelastic Shaft Finite Element for Analysis of Rotors Arghya Nandi,
Sumanta Neogy, Smitadhi Ganguly
IFToMM 2014 EHD Modeling of Angular Contact Ball Element Bearings Letícia Bizarre, Fábio
Nonato de Paula, Katia Lucchesi Cavalca
IFToMM 2014 Controllers for Attenuation of Lateral Rotor Vibration Part I: Controller Design
Rudolf Sebastian Schittenhelm, Stephan Rinderknecht
IFToMM 2014 Controllers for Attenuation of Lateral Rotor Vibration Part II: Controller
Optimization and Comparison Rudolf Sebastian Schittenhelm, Stephan Rinderknecht
IFToMM 2014 Controlled modal energy transfer in torsional systems using impulsive parametric
excitation Thomas Pumhössel, Horst Ecker, Peter Hehenberger, Klaus Zeman
IFToMM 2014 Controlling Non-linear Axial Vibrations of a Turbine Rotor Nicolò Bachschmid,
Davide Colombo, Andrea Monterisi
IFToMM 2014 Stability Analysis and Intelligent Electro-Dynamic Control of Aero-Engine Rotor-
Bearing System J. Srinivas, M. Rajasekhar
IFToMM 2014 Prediction of Rotor Dynamic Behavior of Synchronous Generators J.S. Rao, Vijendra
Gupta, Prachi Khullar, D. Srinivas
IFToMM 2014 Towards Determination of Critical Speeds of a Rotating Shaft with Eccentric
Sleeves: Equations of Motion Antony Kirk, Fotios Georgiades, Chris Bingham
IFToMM 2014 Prediction Capabilities of Coriolis and Gyroscopic Effects in Current Finite Element
Software Valentina Ruffini, Christoph W. Schwingshackl, Jeffrey S. Green

www.rotordynamics.org/paperlists/IFTOMM.html 76/95
19:00, 30/11/2022 IFTOMM

IFToMM 2014 Studying Continuum Dynamic Behaviour through Rigid Multibody Dynamics Vikas
Kumar, Subir Kumar Saha, Suril V. Shah, Jayanta Kumar Dutt
IFToMM 2014 On lumping of Gyroscopic matrix in Finite element analysis of rotors Sumanta
Neogy, Smitadhi Ganguly, Arghya Nandi
IFToMM 2014 Dynamic Response of Asymmetric Rotor Systems under Time-variable Base
Angular Motions Qinkai Han, Fulei Chu
IFToMM 2014 An Innovative Rotordynamical Model for Coupled Flexural-Torsional Vibrations in
Rotating Machines Alice Innocenti, Filippo Cangioli, Lorenzo Marini, Enrico Meli, Luca Pugi,
Andrea Rindi
IFToMM 2014 Non-Linear Analysis of the Defects of a Vertical Turbine Sébastien Denis,
Mohamed-Amine Hassini, Mihaï Arghir
IFToMM 2014 Nonlinear Dynamic Analysis of Ball Bearings Due to Varying Number of Balls and
Centrifugal Force Pavan Kumar Kankar, V. Vakharia, Vijay Kumar Gupta
IFToMM 2014 Sensitivity Analysis on the Dynamic Characteristics of a 1000MW Turbo-Generator
Rotor Danmei Xie, Van Thanh Ngo, Yi Yang, Shang Gao, Jie Guo
IFToMM 2014 Inclusion of Unsteady Bow in a Model-Based Monitoring System for Rotors Markus
Rossner, Thomas Thuemmel, Heinz Ulbrich
IFToMM 2014 A method for assessing the turbine generator set shaft-line behavior in accidental
situations Ionel Nistor, Nicolas Guilloteau, Nabila Sellali-Haraigue, Pierre-Yves Couzon, Pierre
Verrier
IFToMM 2014 Effect of Unbalanced Rotor on the Dynamics of Cylindrical Roller Bearings Pavan
Kumar Kankar, Aditya Sharma, M. Amarnath
IFToMM 2014 Vibration Analysis of Fiber Reinforced Composite Discs Kshitij Gupta, S.P. Singh, V.
Tiwari, Savi Takkar, Rahul Dev, Anant Rai
IFToMM 2014 Numerical Studies of a Nonlinear Flexible Rotating System under Harmonic
Ground Motion Barun Pratiher, Balram Choudhary

www.rotordynamics.org/paperlists/IFTOMM.html 77/95
19:00, 30/11/2022 IFTOMM

IFToMM 2014 Rotor-dynamic Computer Simulations of Rolling Bearing in High-speed Rotating

Machinery Giacomo Landi, Travis Shive, Fabrizio Mandrile
IFToMM 2014 Spherical Roller Bearing Simulation Model with Localized Defects Behnam
Ghalamchi, Jussi Sopanen, Aki Mikkola
IFToMM 2014 Three Case Studies from the UKCS Gas Compressors: Combining Rotor Dynamic
and Process data as an Aid to Diagnosis Geraint Jones
IFToMM 2014 Correlation between Friction Coefficient and Sound Characteristics for Cage
Instability of Cryogenic Deep Groove Ball Bearings Sol Ji Ryu, Bok Seong Choe, Jeon Kook Lee,
Yong Bok Lee
IFToMM 2014 Rotor-stator partial rub diagnosis using Hilbert Huang transform Sanjin Braut,
Roberto Žigulic, Goranka Štimac, Ante Skoblar
IFToMM 2014 Detecting Rub-impact Fault of Rotor System Based on Variational Mode
Decomposition Yanxue Wang, Richard Markert
IFToMM 2014 Experimental Analysis of Rotor-Stator Contact with Many Degrees of Freedom
Oliver Alber
IFToMM 2014 Effect of Rotor-stator Contact on the Mass Unbalance Response Régis Dufour,
Celio Duran, Lionel Manin, Marie Ange Andrianoely, Céline Bordegaray, Frédéric Battle
IFToMM 2014 Dynamic Response of High Speed Flexible Rotor due to Sudden Large Unbalance
Haijun Xuan, Luo Ling, Guo Xiaojun, Li Guoqiang
IFToMM 2014 Multiple Nonlinear Normal Modes of A Rotor-stator Rubbing System Yan-Hua
Chen, Jun Jiang
IFToMM 2014 Investigations on Non-steady Behaviour of Rotors due to Light Rubbing to Brush
Seals Daniel Kreuzer, Robert Fay, Robert Liebich, Sang Werner, Tobias Wiedemann
IFToMM 2014 Non-Linear Analysis of Floating Ring Annular Seals: Stability and Impacts Mihaï
Arghir, Manh-Hung Nguyen
IFToMM 2014 Effects of Clearance on Leakage Flow Characteristics of Labyrinth Brush Seal Yuan

www.rotordynamics.org/paperlists/IFTOMM.html 78/95
19:00, 30/11/2022 IFTOMM

Wei, Zhaobo Chen,Yinghou Jiao, Xin Du, Zhouqiang Zhang

IFToMM 2014 Dynamic Analysis of a Non-Contacting Finger Seal Alexey Selivanov, Joury Temis,
Ivan Dzeva
IFToMM 2014 Periodic Stability and Sensitivity Analysis of Rotating Machinery Aykut Tamer,
Pierangelo Masarati
IFToMM 2014 Numerical Analysis on the Nonlinear Hysteresis Phenomenon Associated with
Instability of a Steam Turbine Rotor-Bearing System Ying Cui, Wang Yongliang, Zhong Jingjun
IFToMM 2014 Stability Analysis and Assessment of Rotor Trains Using Operational Modal
Analysis Eoin Peter Carden, Niklas Sehlstedt, Kenny Krogh Nielsen, Staffan Lundholm, Stefano
Morosi
IFToMM 2014 On the Stabilizing Effect of Support Asymmetry in Rotordynamics Giancarlo Genta
IFToMM 2014 Stability Analysis Based on Energy Balance of Motion of the Gyroscopic Exercise
Tool Tsuyoshi Inoue, Masahiko Aki, Yuki Takezaki, Kentaro Takagi
IFToMM 2014 Development and Validation of a Model to Describe the Bearings Interaction in
Rotating Machines due to Elastic Supporting Structures Enrico Meli, Giovanni Pallini, Andrea
Rindi, Stefano Rossin
IFToMM 2014 Influence of the Supporting Structure Dynamic Behaviour on the Shaft Vibration of
a Real Rotating Machine Andrea Vania, Paolo Pennacchi, Steven Chatterton
IFToMM 2014 Development and Preliminary Validation of a New Strategy to Model the
Interaction between Rotating Machines and Elastic Supporting Structure Stefano Rossin, Enrico
Meli, Andrea Rindi, Giovanni Pallini, Francesco Capanni, Domenico Zaffino, Valentina Peselli,
Daniele Calsolaro
IFToMM 2014 Evaluation of Pedestal Stiffness Variations in Steel Supported Structures for Steam
Turbines Raj Subbiah
IFToMM 2014 Modeling and Experimental Characterization of Resilient Supports for
Turbomolecular Pumps Carmelo Quartarone, Flavio Cometti, Sara Drovandi, Nicola Amati,

www.rotordynamics.org/paperlists/IFTOMM.html 79/95
19:00, 30/11/2022 IFTOMM

Angelo Bonfitto, Lester D. Suarez, Andrea Tonoli

IFToMM 2014 Experimental Evaluation of a Modal Parameter Based Foundation Identification
Procedure Eric Hahn, Minli Yu, Ningsheng Feng
IFToMM 2014 Modeling of visco-elastic supports for hydropower applications Erik Synnegård,
Rolf Gustavsson, Jan-Olov Aidanpää
IFToMM 2014 Theoretical Modeling for a Rotor-bearing-foundation System and its Dynamic
Characteristics Analysis Konstantin Shaposhnikov, Jie Hong, Dayi Zhang , Yanhong Ma
IFToMM 2014 Non-linear Behavior and Loading Capability of the Spring Support in Lateral
Response Marcin Bielecki
IFToMM 2014 Tuning the Vibration of a Rotor with Shape Memory Alloy Metal Rubber Supports
Qicheng Zhang, Jie Hong, Yanhong Ma, Baolong Liu, Fabrizio Scarpa, Dayi Zhang
IFToMM 2014 Thermal Unbalance Behaviour of Turbogenerator Rotors Bartolomeus Irwanto,
Lothar Eckert, Thorsten Prothmann
IFToMM 2014 New Mathematical Model for the Morton Effect Based on the THD Analysis
Alexander Fedorov, B. S. Grigor’ev, Joachim Schmied
IFToMM 2014 Similarity Analysis of Spiral Vibration Behavior on Large Turbomachinery Kris
Matthys, Joachim Schmied
IFToMM 2014 A New Approach for Thermo-elastic Equations to Predict Spiral Vibrations in
Turbogenerator Shafts Mateusz Golebiowski, Rainer Nordmann, Eric Knopf
IFToMM 2014 Thermoelastic Steam Turbine Rotor Control Based on Neural Network Romuald
Rzadkowski, Krzysztof Dominiczak, Wojciech Radulski
IFToMM 2018 A rotordynamics model for rotary drillstring with nonlinear interactions in a 3D
well NGUYEN, Khac Long, TRAN, Quang Thinh, ANDRIANOELY, Marie-Ange, MANIN, Lionel,
MENAND, Stéphane, DUFOUR, Régis, PIAU, Laurent IFTOMM2018-0002

IFToMM 2018 The Influence of the Vibration Suppression on the Rotor Crack Detection
Performance Leão, Leandro de S., Sahinkaya, Alican, Cavalini Jr., Aldemir A., Steffen Jr., Valder,

www.rotordynamics.org/paperlists/IFTOMM.html 80/95
19:00, 30/11/2022 IFTOMM

Sawicki, Jerzy T. IFTOMM2018-0007

IFToMM 2018 Numerical Identification of Nonlinear Hydrodynamic Forces Alves, Diogo Stuani
Alves, Cavalca, Katia Lucchesi Cavalca IFTOMM2018-0008

IFToMM 2018 Thermo-hydrodynamic model influence on first order coefficients in turbocharger

thrust bearings Peixoto, Thales Freitas, Cavalca, Katia Lucchesi IFTOMM2018-0010

IFToMM 2018 Rotordynamic instabilities in washing machines Drüke, Simon, Henke, Christian,
Trächtler, Ansgar, Schuller, Bernd, Bicker, Rainer IFTOMM2018-0011

IFToMM 2018 Analysis of a Rotor Supported by Angular Contact Ball Bearings under EHD
lubrication. Carrer, Laís, Bizarre, Letícia, Cavalca, Katia Lucchesi IFTOMM2018-0013

IFToMM 2018 Residual modal unbalance evaluation method by mode shape weighted
optimization L'vov, Max, Lacombe, Bernd IFTOMM2018-0014

IFToMM 2018 Application of genetic algorithm for synthesis of H∞ controllers for active magnetic
bearing systems Sahinkaya, Alican, Sawicki, Jerzy IFTOMM2018-0016

IFToMM 2018 BALANCING HIGH-SPEED ROTORS AT LOW ROTATION SPEEDS USING PARAMETRIC
EXCITATION Bucher, Izhak, Tresser, Shachar IFTOMM2018-0017

IFToMM 2018 Study of stiffness reduced order model applied to line and elliptical contact under
EHD lubrication Bizarre, Letícia, Tsuha, Natália Akemi Hoshikawa, Cavalca, Katia Lucchesi
IFTOMM2018-0018

IFToMM 2018 Nonlinear dynamics of a rotary drill-string immersed in a 3D geometry well TRAN,
Quang-Thinh, Nguyen, Khac-Long, Manin, Lionel, Andrianoely, Marie-Ange, Menand, Stéphane,
Dufour, Régis IFTOMM2018-0021

IFToMM 2018 Applying compressed sensing to blade tip timing data: A parametric analysis
Spada, Raphael Pereira, Nicoletti, Rodrigo IFTOMM2018-0022

IFToMM 2018 Dynamic behavior of a rotor-AMB system due to strong base motions Clément,
Jarroux, Mahfoud, Jarir, Dufour, Régis, Legrand, Franck, Defoy, Benjamin, Alban, Thomas
IFTOMM2018-0024

www.rotordynamics.org/paperlists/IFTOMM.html 81/95
19:00, 30/11/2022 IFTOMM

IFToMM 2018 Stochastic Collocation approach to Bayesian Inference applied to rotating system
parameter identification Garoli, Gabriel, Tyminski, Natalia, Castro, Helio IFTOMM2018-0025

IFToMM 2018 Stiffness and damping reduced model in EHD line contacts Tsuha, Natália Akemi
Hoshikawa, Nonato, Fábio, Cavalca, Katia Lucchesi IFTOMM2018-0026

IFToMM 2018 Computational analysis of nonlinear dynamics of a multi-disk rotor-bearing-brush

seal system Wei, Yuan, Chen, Zhaobo, Jiao, Yinghou IFTOMM2018-0027

IFToMM 2018 Vibration analysis of an electric wheel hub motor at stationary operating points
Duvigneau, Fabian, Daniel, Christian, Koch, Sebastian, Woschke, Elmar, Gabbert, Ulrich
IFTOMM2018-0028

IFToMM 2018 Dynamical Characteristic Analysis of Elastic Ring Squeeze Film Damper in Rotor
System Han, Zhifei, Ding, Qian, Zhang, Wei IFTOMM2018-0029

IFToMM 2018 Application of stochastic collocation on eigenfrequencies analysis of a rotor-

bearing system Visnadi, Laís Bittencourt, Garoli, Gabriel Yuji, Castro, Hélio Fiori IFTOMM2018-
0030

IFToMM 2018 Crack detection and dynamic analysis of a cracked rotor with soft bearings using
different methods of solution Rangel de Oliveira, Lucas, Pechoto de Melo, Gilberto IFTOMM2018-
0031

IFToMM 2018 An Active Elastic Support/Dry Friction Damper ：New Modeling and Analysis for
Vibration Control of Rotor Systems WANG, Siji, LIAO, Mingfu, SONG, Mingbo, XU, Yingge
IFTOMM2018-0032

IFToMM 2018 Application of pattern recognition for the mitigation of systematic errors in an
optical incremental encoder Bertoti, Elvis, Yamashita, Rodrigo, Jony, Eckert, Fabio, Santiciolli,
Franco, Dedini, Ludmila, Silva IFTOMM2018-0034

IFToMM 2018 A compensation method for foundation effects in rotating systems through shape
optimization Rother, César S., Alencar, Augusto C. M. G. de, Machado, Tiago H. IFTOMM2018-
0035

www.rotordynamics.org/paperlists/IFTOMM.html 82/95
19:00, 30/11/2022 IFTOMM

IFToMM 2018 Stochastic modeling of rotordynamics for electrical fuel pump application Ferreira,
André, Castro, Hélio IFTOMM2018-0036

IFToMM 2018 NUCLEAR REACTOR HEAT TRANSFER PUMP ROTORDYNAMIC BASED DIAGNOSTICS
AND FIELD DATA MODEL RECONCILIATION Hidalgo, Juan, O'Brien, Ronald IFTOMM2018-0037

IFToMM 2018 Nonlinear transverse and in-plane vibrations of a thin rotating disk Xianglin, Wu,
Yinghou, Jiao, Zhaobo, Chen IFTOMM2018-0038

IFToMM 2018 Performance Analysis of Support Vector Machine and Wavelet Packet Transform
based Fault Diagnostics of Induction Motor at Various Operating Conditions Gangsar,
Purushottam, Tiwari, Rajiv IFTOMM2018-0039

IFToMM 2018 Identification of Coupling Parameters in Flexibly Coupled Jeffcott Rotor Systems
with Angular Misalignment and Integrated Through Active Magnetic Bearing Srinivas, Siva
Rangavajhula, Tiwari, Rajiv, BABU, CH. KANNA IFTOMM2018-0040

IFToMM 2018 Unbalance Vibration Compensation Control Using Deep Network for Rotor System
with Active Magnetic Bearings Yao, Xuan, Chen, Zhaobo, Jiao, Yinghou IFTOMM2018-0041

IFToMM 2018 Simulation of the ball kinetic in ball-type automatic balancing devices by solving
the axisymmetric Navier-Stokes equations in annular cavities Spannan, Lars, Daniel, Christian,
Woschke, Elmar IFTOMM2018-0042

IFToMM 2018 Numerical Analyses of the Dead-Band Clearance Effect on the Vibrations of a
Vertical Rotor Arghir, Mihai, Amami, Lassad IFTOMM2018-0043

IFToMM 2018 A co-energy based approach to model the rotordynamics of electrical machines
Boy, Felix, Hetzler, Hartmut IFTOMM2018-0044

IFToMM 2018 Multi Fault Diagnosis of Centrifugal Pumps with Time, Frequency and Wavelet
based Features using Support Vector Machines Janani, Shruti Rapur, Tiwari, Rajiv IFTOMM2018-
0046

IFToMM 2018 Balancing of Turbomolecular Pumps: Modal Balancing approach and experimental
results Quartarone, Carmelo, Beqari, Julian, Girardello Detoni, Joaquim, Cometti, Flavio, Emelli,

www.rotordynamics.org/paperlists/IFTOMM.html 83/95
19:00, 30/11/2022 IFTOMM

Enrico IFTOMM2018-0047

IFToMM 2018 Aerodynamic performance and annual energy production for small horizontal axis
windmills using different airfoils Okita, Willian , Kamal, Ismail, Luiz, Moura IFTOMM2018-0048

IFToMM 2018 Unbalance identification in a rotor supported by active magnetic bearing Siva,
Gilberto Machado, Pederiva, Robson IFTOMM2018-0049

IFToMM 2018 Numerical study on the influence of Gas Foil Thrust Bearings on the vibrational
behavior Pronobis, Tomasz, Liebich, Robert IFTOMM2018-0050

IFToMM 2018 Magnetic Bearings for Non-static Flywheel Energy Storage Systems (FESS)
Dagnaes-Hansen, Nikolaj, Santos, Ilmar F. IFTOMM2018-0052

IFToMM 2018 The application of controllable magnetorheological squeeze film dampers for
minimizing energy losses and the driving moment of rotating machines Zapomel, Jaroslav,
Ferfecki, Petr, Kozanek, Jan IFTOMM2018-0053

IFToMM 2018 Dynamic response of a lightweight stator structure for a large diameter direct-
drive wind turbine generator Nutakor, Charles , Semken, Scott , Heikkinen, Janne , Sopanen, Jussi
, Mikkola, Aki IFTOMM2018-0058

IFToMM 2018 The influence of various control strategies on transient torsional vibrations of
rotor-machines driven by asynchronous motors Szolc, Tomasz, Konowrocki, Robert, Pisarski,
Dominik, Pochanke, Andrzej IFTOMM2018-0059

IFToMM 2018 Application of regularised cavitation algorithm for transient analysis of rotors
supported in floating ring bearings Nitzschke, Steffen, Woschke, Elmar, Daniel, Christian
IFTOMM2018-0061

IFToMM 2018 Identification of Crack and Internal Damping Parameters using Full Spectrum
Responses from a Jeffcott Rotor Integrated with an Active Magnetic Bearing Sarmah, Nilakshi,
Tiwari, Rajiv IFTOMM2018-0062

IFToMM 2018 STIFFENING EFFECT AND DRY-FRICTION DAMPING OF BLADED WHEEL MODEL
WITH Pesek, Ludek, Pust, Ladislav, Sulc, Petr, Bula, Vitezslav, Snabl, Pavel IFTOMM2018-0063

www.rotordynamics.org/paperlists/IFTOMM.html 84/95
19:00, 30/11/2022 IFTOMM

IFToMM 2018 Power loss and temperature growth in the backup bearing of AMB-supported high
speed electric motor during a dropdown Neisi, Neda, Sikanen, Eerik, Heikkinen, Janne E. ,
Sopanen, Jussi , Sillanpää, Teemu IFTOMM2018-0064

IFToMM 2018 A case study of the contact force and stress in the backup bearing of a generator:
Experimental study and numerical simulation of dropdown Neisi, Neda, Ghalamchi, Behnam,
Heikkinen, Janne E., Sillanpää, Teemu, Hartikainen, Toni , sopanen, Jussi IFTOMM2018-0065

IFToMM 2018 Robust Control Applied to Faulting Journal Bearing Freire Wu, Matheus, Machado,
Tiago Henrique, Lucchesi Cavalca Dedini, Katia IFTOMM2018-0066

IFToMM 2018 Simulation of a test rig and identification of annular gas seals coefficients
Maldonado, David, Côrtes, Vinicius, Diaz, Diego, Castro Pinto, Fernando, Ritto, Thiago
IFTOMM2018-0067

IFToMM 2018 Control of flexible rotor vibration with flexibly mounted active magnetic bearings
Lusty, Christopher, Bailey, Nicola, Keogh, Patrick IFTOMM2018-0070

IFToMM 2018 Interpretation of Dynamic Data Plots for Troubleshooting and Resolving Vibration
in Large Rotating Machinery Racic, Zlatan, Racic, Marin IFTOMM2018-0071

IFToMM 2018 The Classical Linearization Technique's Validity for Compliant Bearings von
Osmanski, Sebastian, Steffen Larsen, Jon, F. Santos, Ilmar IFTOMM2018-0072

IFToMM 2018 Rotordynamic Force Coefficients of Gas Seals - An Experimental Approach with
Active Magnetic Rotor Excitation Griebel, Clemens IFTOMM2018-0073

IFToMM 2018 Analysis of the rotor supported by gas foil bearings considering the assembly
preload and hardening effect Zywica, Grzegorz, Baginski, Pawel, Bogulicz, Malgorzata, Sawicki,
Jakub IFTOMM2018-0074

IFToMM 2018 Selection of the bearing system for a 1 kW ORC microturbine Breńkacz, Łukasz,
Grzegorz, Żywica, Małgorzata, Bogulicz IFTOMM2018-0075

IFToMM 2018 Dynamics of very high-speed rotors at non-stationary working conditions SGHAIER,
Emna, BOURDON, Adeline, REMOND, Didier, DION, Jean-Luc, PEYRET, Nicolas IFTOMM2018-0076

www.rotordynamics.org/paperlists/IFTOMM.html 85/95
19:00, 30/11/2022 IFTOMM

IFToMM 2018 Parametric study of the effects of varying the airfoil section, its number and the
chord and pitch distributions along the propeller blade Ismail, Kamal A. R., Rosolen, Célia V. A. G.
IFTOMM2018-0078

IFToMM 2018 Modal Balancing Using Parametric Combination Resonance Mendes, Ricardo
Ugliara, Dohnal, Fadi IFTOMM2018-0079

IFToMM 2018 Experimental and theoretical comparison between the ball and pinned bearing
working as backup bearing for magnetically levitated rotors. Fonseca, Cesar Augusto, Weber,
Hans, Santos, Ilmar IFTOMM2018-0080

IFToMM 2018 Stochastic Analysis of Asymmetric Tilting-Pad Journal Bearings Silva, Heitor
Antonio, Nicoletti, Rodrigo IFTOMM2018-0081

IFToMM 2018 Effect of Uncertainty in External Forcing on a Fluid Lubricated Bearing Bailey,
Nicola, Hibberd, Stephen, Tretyakov , Michael IFTOMM2018-0085

IFToMM 2018 Experimental investigations on vibration characteristics of micro gas turbine

bearing-rotor system HAN, Dongjiang, YANG, Jinfu IFTOMM2018-0087

IFToMM 2018 Application of Machine Learning in Diesel Engines Fault Identification Pestana-
Viana, Denys, Gutiérrez, Ricardo, Lima, Amaro, Silva, Fabrício, Vaz, Luiz, Prego, Thiago, Monteiro,
Ulisses IFTOMM2018-0091

IFToMM 2018 Reduction of rotor vibration amplitude using PID tuning methods Saint Martin,
Leonardo, Alves, Diogo, Mendes, Ricardo, Cavalca, Katia IFTOMM2018-0093

IFToMM 2018 Detection of Cracks in a Rotating Shaft Using Density Characterization of Orbit
Plots Haj Mohamad, Turki, Ap Cavalini Jr, Aldemir , Steffen Jr, Valder , Nataraj, C. IFTOMM2018-
0094

IFToMM 2018 Quantitative analysis method of whole aero-engine structural design based on
structural efficiency PENG, Gang, LI, Chao, ZHENG, Huaqiang, MA, Yanhong, HONG, Jie
IFTOMM2018-0095

IFToMM 2018 Experimental structural analysis of gas foil bearings Kayo, Cédric Kayo, Liebich,

www.rotordynamics.org/paperlists/IFTOMM.html 86/95
19:00, 30/11/2022 IFTOMM

Prof. Robert Liebich IFTOMM2018-0096

IFToMM 2018 Model-based vibration condition monitoring for fault detection and diagnostics
applied to large hydro generators Brito Junior, Geraldo Carvalho, Machado, Roberto Dalledone,
Chaves Neto, Anselmo IFTOMM2018-0097

IFToMM 2018 Effect of magnet mass distribution on balancing quality of the high-speed
permanent magnet turbo generator Ghasemi, hamed, Ghalamchi, Behnam, Hartikainen, Toni,
sopanen, jussi IFTOMM2018-0099

IFToMM 2018 Multibody Dynamics Simulation of a Mechanism for Generating Continuously

Variable Motion Bhusal, Krishna Prakashl, Ghalamchi, behnam, Nutakor, Charles, Nummelin,
Tommi, Sopanen, Jussi IFTOMM2018-0100

IFToMM 2018 Vibration Effect by Unbalanced Magnetic Pull in a Centrifugal Pump with
Integrated Permanent Magnet Synchronous Motor Kim, Heesoo, Posa, Atte, Nerg, Janne,
Heikkinen, Janne, Sopanen, Jussi IFTOMM2018-0101

IFToMM 2018 Model-based identification of rotor-bearing system dynamic parameters

employing adaptive filtering Moraes Coraça, Eduardo, Dias Junior, Milton IFTOMM2018-0102

IFToMM 2018 Dynamic model and theoretical investigation for the fan-blade out event in the
flexible rotor system of aero-engine Ma, Yanhong, Wang, Yongfeng, Hong, Jie IFTOMM2018-0103

IFToMM 2018 The Influence of Friction in Rotor-stator Contact Nonlinear Dynamics Moreira,
Rodrigo Veronese, Paiva, Alberto IFTOMM2018-0105

IFToMM 2018 Vibration Suppression of Additional Unbalance caused by the Non-continuous

Characteristics of a Typical Aero-engine Rotor Chen, Xueqi, Ma, Yanhong, Hong, Jie IFTOMM2018-
0106

IFToMM 2018 Investigation on the dynamic characteristics of a rotor suffering impact foundation
external excitation Shaposhnikov, Konstantin , Zhang, Dayi, Yan, Wenzhong, Hong, JIe
IFTOMM2018-0107

IFToMM 2018 Problems of rotordynamic modeling for built-up gas turbine rotors with central tie

www.rotordynamics.org/paperlists/IFTOMM.html 87/95
19:00, 30/11/2022 IFTOMM

rod shaft Shaposhnikov, Konstantin IFTOMM2018-0110

IFToMM 2018 Monitoring of Induction Motor Mechanical and Electrical Faults by Optimum
Multiclass-Support Vector Machine Algorithms Using Genetic Algorithm Bordoloi, D J, Tiwari,
Rajiv IFTOMM2018-0111

IFToMM 2018 Characteristic Parameters Estimation of Uncertainties Present in an Active

Magnetic Bearing Integrated Flexible Rotor System Using Dynamic Reduction Technique Kuppa,
Sampath Kumar, Lal, Mohit IFTOMM2018-0114

IFToMM 2018 Speed Dependent Dynamic Parameters Estimation of a Rotor-Bearing-Coupling

System Satapathy, Monalisha, Lal, Mohit IFTOMM2018-0115

IFToMM 2018 Operational Modal Analysis of a Centrifugal Compressor in Field Operation Zague,
Leandro de Oliveira, Cloud, Charles Hunter, Miranda, Accorsi Miranda, Campos, Rogerio da SIlva
IFTOMM2018-0120

IFToMM 2018 Bred vector for analysis of helicopter main rotor dynamics Sumida, Ivana Yoshie,
Campo Velho, Haroldo Fraga de, Ritto, Thiago Gamboa IFTOMM2018-0122

IFToMM 2018 Influence of manufacturing errors on the unbalance response of foil bearings Fatu,
Aurelian, Arghir, Mihai IFTOMM2018-0128

IFToMM 2018 Parametric sensitivity analysis of tilting pad bearings to investigate the dynamic
behavior of rotating machines Ito, Leandro Ramos, Ramos, Douglas Jhon, Silveira, Zilda de
Castro, Daniel, Gregory Bregion IFTOMM2018-0130

IFToMM 2018 RUBBING EFFECT ANALYSYS IN A CONTINUOUS ROTOR MODEL Varanis, Marcus,
Mereles, Arthur, Anderson, Silva, Balthazar, Jose Manoel, Tusset, Angelo Marcelo IFTOMM2018-
0132

IFToMM 2018 Experimental Validation of Angular Viscoelastic Dynamic Neutralizers Designed for
Flexural Vibration Control in Rotating Machines Voltolini, Danielle Raphaela, Kluthcovsky, Samuel,
Lopes, Eduardo Marcio de Oliveira, Bavastri, Carlos Alberto IFTOMM2018-0137

IFToMM 2018 Dynamic Analysis of Rotating Systems Considering Uncertainties in the Bearings'

www.rotordynamics.org/paperlists/IFTOMM.html 88/95
19:00, 30/11/2022 IFTOMM

Parameters Ferraz, Ádamo Ramalhete, Ramos, Douglas Jhon, Daniel, Gregory Bregion, Ritto,
Thiago Gamboa IFTOMM2018-0138

IFToMM 2018 Application of machine learning to evaluate unbalance severity in rotating

machines Hemerly, Douglas, Martins, Dionísio, Prego, Thiago, Lima, Amaro, Silva, Fabrício,
Marins, Matheus Araujo, Ribeiro, Felipe Moreira Lopes, sergioln@smt.ufrj.br,
eduardo@smt.ufrj.br IFTOMM2018-0140

IFToMM 2018 Analysis of a drill-string experimental set-up with dry friction-induced torsional
vibration Cayres, Bruno, Fonseca, Cesar A., Sampaio, Guilherme, Weber, Hans I. IFTOMM2018-
0143

IFToMM 2018 Simulation and Analysis of the Influence of the Support Structure on a Wind
Turbine Gear Set Okabe, Eduardo, Masarati, Pierangelo IFTOMM2018-0145

IFToMM 2018 Analysis of analytical hydrodynamic bearing models on a reciprocating compressor

Okabe, Eduardo, Izuka, Jaime, Resch, Reinhard IFTOMM2018-0146

IFToMM 2018 Modeling and simulation of the drivetrain of a metal lathe Okabe, Eduardo,
Suyama, Daniel IFTOMM2018-0147

IFToMM 2018 Analysis of a rotating machine flexibly supported by vibration isolating materials
Hiroyuki, Fujiwara, Keiji, Watanabe, Shigeharu, Hayashi IFTOMM2018-0150

IFToMM 2018 Active control of rotating machinery under rotor-stator contact conditions Keogh,
Patrick, Lusty, Chris, Bailey, Nicola, Saket, Fawaz IFTOMM2018-0152

IFToMM 2018 Aerodynamic evaluation of Gottingen and Joukowski airfoils for use in rotors of
small wind turbines Canale, Thiago Canale, Ismail, Kamal A. R. Ismail, Lino, Fatima A. M. Lino
IFTOMM2018-0153

IFToMM 2018 INFLUENCE OF TEMPERATURE AND INJECTION PRESSURE OF LUBRICATION IN THE

VIBRATION OF AN AUTOMOTIVE TURBOCHARGER Sandoval Rodriguez, Oscar Ricardo, J Machado,
Luiz Henrique, Castro Caetano, Bryan, Lara, Isadora F., Molina, Ramon IFTOMM2018-0155

IFToMM 2018 Radial Active Magnetic Bearing Design Optimization Betancor, Javier, Sahinkaya, M.

www.rotordynamics.org/paperlists/IFTOMM.html 89/95
19:00, 30/11/2022 IFTOMM

Necip, Zweiri, Yahya IFTOMM2018-0157

IFToMM 2018 Comparison of lubricant force models for rattle analysis on gear transmissions
Fernández-del-Rincón, Alfonso, Diez-Ibarbia, Alberto, Iglesias, Miguel, García-Fernández, Pablo,
De-Juan, Ana, Viadero, Fernando IFTOMM2018-0159

IFToMM 2018 Machine Learning in Crack Size Estimation of a Spur Gear Pair Using Simulated
Vibration Data Gecgel, Ozhan , Ekwaro-Osire, Stephen, Dias, João Paulo, Nispel, Abraham,
Alemayehu, Fisseha M., Endeshaw, Haileyesus B. IFTOMM2018-0160

IFToMM 2018 Dynamics analysis of reciprocating compressor crankshafts Morillo, Alfredo Hugo
Valença, Kurka, Paulo Roberto Gardel, Bittencourt, Marco Lucio IFTOMM2018-0161

IFToMM 2018 Measurements of Rotordynamic Force Coefficients of Metallic Type Brush Seals
Polly, Pascal, Bonneau, Olivier, Arghir, Mihaï, Cochain, Florent, Dehouve, Jerôme IFTOMM2018-
0163

IFToMM 2018 Some examples of incomplete diagnostic analyses of industrial machinery

Bachschmid, Nicolò IFTOMM2018-0164

IFToMM 2018 Kriging surrogate model dedicated to a tilting-pad journal bearing Dourado,
Arinan, Silva Barbosa, Jefferson, Cavalini Jr, Aldemir Ap, Steffen Jr, Valder, Leonardo, Sicchieri
IFTOMM2018-0166

IFToMM 2018 STABILITY ANALYSIS OF A CRACKED BLADE COUPLED WITH A RIGID ROTOR Rende,
Bruno, Batista, Izabela, Souza Morais, Tobias, Ap Cavalini Jr, Aldemir, Steffen Jr, Valder
IFTOMM2018-0170

IFToMM 2018 REDUCTION METHODS APPLIED IN THE ANALYSYS OF UNCERTAINTIES IN

ROTATING MACHINES GONÇALVES, DANIEL FERREIRA, da COSTA, TATIANE NUNES, BORGES,
ROMES ANTONIO, CAVALINI JR., ALDEMIR APARECIDO, STEFFEN JR, VALDER IFTOMM2018-0171

IFToMM 2018 A preliminary experiment to excite and identify modal frequencies of a rotor in the
rotating frame of reference Gantasala, Sudhakar, Aidanpää, Jan-Olov IFTOMM2018-0172

IFToMM 2018 Effects of Twist Angle on Rubbing Induced Vibration Responses of Blade Ma, Hui

www.rotordynamics.org/paperlists/IFTOMM.html 90/95
19:00, 30/11/2022 IFTOMM

Ma, Sun, Qi Sun, Zeng, Jin Zeng, Wen, Bangchun Wen IFTOMM2018-0177

IFToMM 2018 Progresses in calibrating Active Magnetic Bearings with Numerical and
Experimental Approaches Maierhofer, Johannes, Wagner, Christian, Thümmel, Thomas, Rixen,
Daniel IFTOMM2018-0178

IFToMM 2018 EFFECT OF LUBRICANT SUPPLY PRESSURE ON SFD PERFORMANCE: ENDS SEALED
WITH O-RINGS AND PISTON RINGS San Andres, Luis, Koo, Bonjin IFTOMM2018-0181

IFToMM 2018 Machine Diagnosis as a Standardized Approach El-Shafei, ALY IFTOMM2018-0183

IFToMM 2018 SEMA JIB: A Versatile High Performance Smart Bearing El-Shafei, Aly IFTOMM2018-
0184

IFToMM 2018 Auto Resonance Based Identification of Rotating Systems Ariel, Netanel, Setter,
Eyal, Minikes, Adi, Davis, Solomon, Bucher, Izhak IFTOMM2018-0186

IFToMM 2018 Rotor Orbits at Operation Speed and Model-based Diagnosis of Multiple Errors
Thuemmel, Thomas, Rossner, Markus, Wagner, Christian, Maierhofer, Johannes, Rixen, Daniel
IFTOMM2018-0187

IFToMM 2018 Modal Testing of a Full-Scale Rotating Woven Composite Fan Using Piezoelectric
Excitation Mabilia, Antoine, Gibert, Claude, Thouverez, Fabrice, De Jaeghere, Edouard, Sanchez,
Lionel, Giovannoni, Laura IFTOMM2018-0188

IFToMM 2018 Measurement corrections for active magnetic bearing control Almeida, Lucas,
Barbosa, José Maria, Santos, Félix, del Foyo, Pedro IFTOMM2018-0191

IFToMM 2018 Flexible disc coupling model in rotating shafts Tuckmantel, Felipe W. S., Schoola,
Caio G., Cavalca, Katia L. IFTOMM2018-0192

IFToMM 2018 Kriging-Based Surrogate Modeling for Rotordynamics Prediction in Rotor-Bearing

System Pedrosa Franco Barbosa, Mateus, Martins Alves, William IFTOMM2018-0194

IFToMM 2018 Calculating Rotordynamic Coefficients of Liquid Annular Seals by CFD for Vibration
Analysis and Validation at the Test Rig Wagner, Christian, Sinzig, Stephan, Thümmel, Thomas,
Rixen, Daniel IFTOMM2018-0196

www.rotordynamics.org/paperlists/IFTOMM.html 91/95
19:00, 30/11/2022 IFTOMM

IFToMM 2018 Hysteretic (non-reversible) bit-rock interaction model for torsional vibration
analysis of a drill-string Real, Fabio Ferreira, Batou, Anas, Ritto, Thiago Gamboa, Desceliers,
Christophe, Aguiar, Romulo IFTOMM2018-0197

IFToMM 2018 Intelligent Condition Monitoring for Rotating Machinery Using Compressively-
Sampled Data and Sub-space Learning Techniques Ahmed, Hosameldin, Nandi, Asoke
IFTOMM2018-0199

IFToMM 2018 A modified model reduction technique for the dynamic analysis of rotor- stator
rub Prabith, K, Krishna, I R Praveen IFTOMM2018-0203

IFToMM 2018 Coupled Simulation of Rotor Systems Supported by Journal Bearings Balaji, Nidish
Narayanaa , Krishna, I R Praveen IFTOMM2018-0204

IFToMM 2018 Rotor-stator partial rub detection based on Teager-Huang transform Braut, Sanjin,
Zigulić, Roberto, Stimac Rončević, Goranka, Skoblar, Ante, Mirkovic, Mihajlo, Bulic, Neven
IFTOMM2018-0209

IFToMM 2018 Input Force Identification in a Francis Hydro Turbine Unit Model Morais, Tobias,
Cavalini Jr, Aldemir, Steffen Jr, Valder IFTOMM2018-0211

IFToMM 2018 Wave and Vibration Analysis of Rotating Periodic Structures by Wave-Based
Methods Beli, Danilo, Silva, Priscilla Brandão, Mencik, Jean-Mathieu, Arruda, José Roberto de
França IFTOMM2018-0213

IFToMM 2018 Modeling and simulation of decoupler pulley effects on FEAD torsional vibration
Berto, Lucas Figueiró, Michelotti, Alvaro Canto, Pastorelli, Pedro Palma, Ferrreira, André Luis
Francioso IFTOMM2018-0214

IFToMM 2018 Rotordynamic influence of a spider mounted on shaft with interference fit in an
electric machine rotor Storti, Gabriel Chagas, Fonçatti, Lucas Gomes IFTOMM2018-0215

IFToMM 2018 Modeling the rotor vibrations of a hydropower unit during a runaway regime
Cupillard, Samuel Cupillard IFTOMM2018-0219

IFToMM 2018 Vibration based condition monitoring of planetary gearboxes operating under

www.rotordynamics.org/paperlists/IFTOMM.html 92/95
19:00, 30/11/2022 IFTOMM

speed varying operating conditions based on cyclo non stationary analysis Mauricio, Alexander,
Qi, Junyu, Wade, Smith, Randall, Robert, Gryllias, Konstantinos IFTOMM2018-0221

IFToMM 2018 Development of a Wind Turbine Blade with Dedicated Profiles by Schmitz's
Optimum Dimensioning Systematization Oliveira, André Ribeiro de, Rocha, Álvaro Barbosa da,
Marcelino, Emerson da Trindade, Cassimiro, Rafael Ítalo Lopes, Rodrigues, João Vítor de Melo,
Duarte, Raimundo Nonato Calazans IFTOMM2018-0223

IFToMM 2018 Satellite Controller System based on Reaction Wheels using the State-Dependent
Riccati Equation (SDRE) on Java Romero, Alessandro , Souza, Luiz Carlos Gadelha IFTOMM2018-
0228

IFToMM 2018 Analysis of Variable Mass Rotordynamic Systems with Semi-Analytic Time-
Integration Holl, Helmut J. IFTOMM2018-0229

IFToMM 2018 Nonlinear Analyses in Rotor-Dynamic Engineering Schmied, Joachim, Fuchs,

Andreas IFTOMM2018-0231

IFToMM 2018 Dynamic Analysis of Rotating Motor Protein(ATP synthase) using FEM Tirtom,
Ismail, Luo, Xu, Hatayama, Eiji IFTOMM2018-0232

IFToMM 2018 Differentiating tooth root cracks and spalls in planet gears from changes in the
transmission error Peng, Dikang, Smith, Wade A, Randall, Robert B, Peng, Zhongxiao
IFTOMM2018-0234

IFToMM 2018 Effect of texture region on the static and dynamic characteristic of partially
textured journal bearings TAURA, HIROO IFTOMM2018-0235

IFToMM 2018 Blade modal analysis by means of continuous optical fiber sensors Pennacchi,
Paolo, Cazzulani, Gabriele, Chieppi, Martina, Colombo, Andrea IFTOMM2018-0236

IFToMM 2018 Detection of gear tooth crack in a wind turbine planetary gearbox Joshi, Rachna,
Darpe, Ashish Kamalakar IFTOMM2018-0237

IFToMM 2018 Experimental investigations on torsional vibrations of a rotor during a rotor-stator

rub Mokhtar, Asjad, Darpe, Ashish Kamalakar, Gupta, Kshitij IFTOMM2018-0238

www.rotordynamics.org/paperlists/IFTOMM.html 93/95
19:00, 30/11/2022 IFTOMM

IFToMM 2018 Intermittent rub caused by carbonized oil in a steam turbine Andrea, Vania, Paolo,
Pennacchi, Chatterton, Steven, Cangioli, Filippo IFTOMM2018-0239

IFToMM 2018 Special signal processing tools for the experimental data of spiral vibrations
Andrea , Vania, Paolo , Pennacchi, Chatterton, Steven , Cangioli, Filippo IFTOMM2018-0240

IFToMM 2018 Optimized tribo-design of lubricants for power loss reduction in journal bearings
used in process industry Pennacchi, Paolo, Chatterton, Steven, Vania, Andrea IFTOMM2018-0241

IFToMM 2018 Diagnostics of bearings in rolling stocks: results of long lasting tests for a regional
train locomotive Pennacchi, Paolo Pennacchi, Chatterton, Steven, Vania, Andrea, Lang, Xu
IFTOMM2018-0243

IFToMM 2018 Numerical modeling of spiral vibrations caused by the presence of brush seals
Pennacchi, Paolo, Cangioli, Filippo, Vania, Andrea, Chatterton, Steven IFTOMM2018-0244

IFToMM 2018 Development and validation of a bulk-flow model for staggered labyrinth seals.
Cangioli, Filippo, Pennacchi, Paolo, Chatterton, Steven, Vannini, Giuseppe, Ciuchicchi, Lorenzo,
Nettis, Leonardo IFTOMM2018-0245

IFToMM 2018 Optimal filtering of cyclic transients and its application to helicopter gearbox
diagnosis Abboud, Dany, Elbadaoui, Mohammed IFTOMM2018-0246

IFToMM 2018 Effects of severe operating conditions (high loads / low rotational speeds) on
sleeve journal bearings Chatterton, Steven, Pennacchi, Paolo, Vania, Andrea IFTOMM2018-0247

IFToMM 2018 Investigation of Cooled Pads for Tilting-pad Bearings Chatterton, Steven,
Pennacchi, Paolo, Vania, Andrea IFTOMM2018-0248

IFToMM 2018 Detection of sensor detachment in aircraft engines using vibration signals Abboud,
Dany, Elbadaoui, Mohammed, Becquerelle , Samuel, Lalmi, Majid IFTOMM2018-0249

IFToMM 2018 Dynamic modeling of flexible rotors embarked in vehicles undergoing arbitrary
motion Everton , Spuldaro, Sales, Thiago de Paula, Damy, Luiz Fabiano, Rade, Domingos Alves
IFTOMM2018-0251

IFToMM 2018 Vibration Control of a Gas Turbine-Generator Rotor in a Combined Cycle System by

www.rotordynamics.org/paperlists/IFTOMM.html 94/95
19:00, 30/11/2022 IFTOMM

means of Active Magnetic Bearings Pilotto, Rafael, Nordmann, Rainer IFTOMM2018-0253

IFToMM 2018 Numerical Analysis of Influence Coefficients for On-site Balancing of Flexible
Rotors Nordmann, Rainer, Knopf, Eric, Abrate, Bastien IFTOMM2018-0255

IFToMM 2018 Constructing accurate phenomenological surrogate models for fluid structure
interaction Guerra, Gabriel M., Freitas, Rodolfo, Rochinha, Fernando A. IFTOMM2018-0257

IFToMM 2018 Root Cause Investigation of High Frequency Structural Vibration on a High
Pressure Hydrogen Compressor Brandão, André, Rangel Jr., Joilson, Melo, Rodolfo IFTOMM2018-
0259

Copyright © 2017 Rotating Machinery Analysis, Inc.. All rights reserved.

www.rotordynamics.org/paperlists/IFTOMM.html 95/95