BILL OF QUANTITIES

PLUMBING & FIRE FIGHTING

WORKS (LOW SIDE)
 SUMMARY

PROJECT

PROPOSED OFFICE BUILDING AT LEH

SUBJECT
SANITARY ENGINEERING& FIRE FIGHTING SERVICES

AMOUNT
S.No Description DSR Items Non DSR Total

I Sanitary Fixtures

II Soil, Waste & Vent Pipes, Rain water Pipes and Fittings

III Water Supply System

IV Fire fighting system

TOTAL

BOQ 2
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

PROJECT

PROPOSED OFFICE BUILDING AT LEH

SUBJECT
SANITARY ENGINEERING SERVICES

Ref. DSR
2002 S.No Description Unit Qty. Rate

(I-A) SANITARY INSTALLATIONS ( DSR ITEMS )

19.3 2 Providing and fixing white vitreous China

pedestal type water closet (European Type)
with seat and lid, with C.P brass hinges and
rubber buffers, 10 litre low level dual flushing
cistern with fittings and C.I/M.S brackets,
40mm flush bend, overflow arrangement with
specials of standard make and mosquito proof
coupling of approved Municipal Design
complete including painting of fittings and
brackets, cutting and making good the walls
and floors wherever required.

19.3.2 1.1 W.C Pan ISI Marked with white solid plastic
seat and lid with white vitreous China flushing
cistern & C.P flush bend. Each 24

19.5 3 Providing and fixing white vitreous china flat

back half stall urinal of size 580x300x350mm
with PVC automatic flushing cistern,
Parryware/ Hindware Seabird/ Oreint (Corel)
with fitting, standard size CP Brass flush pupe,
spreaders with unions and clamps (All in CP
brass) with waste fitting as per IS: 2556, CI
trap with outlet grating and other couplings in
CP brass including painting of fittings and
cutting and making good the walls and floors
wherever required

19.5.2 3.1 Range of two half stall urinals with 5 litre PVC
automatic flushing cistern Each 5

19.5.3 3.2 Range of two half stall urinals with 5 litre PVC
automatic flushing cistern Each R.O.

BOQ 2
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Ref. DSR
2002 S.No Description Unit Qty. Rate

19.7 4 Providing and fixing wash basin with C.I/M.S

brackets, 15mm C.P. brass pillar taps,
Kingston/Gem/Techno/Parko, 32mm C.P.
brass waste of standard pattern, including
painting of fittings and brackets, cutting and
making good the walls wherever required:

a) White Virteous China

19.7.4 i) Flat back Wash Bain size 550 x 400 mm with

single 15 mm C.P. Brass pillar tap. Each 24

19.10A 4 Providing and Fixing Salem Stainless Steel A

ISI 304 (18/8) kitchen sink as per I.S. 13983
with C.I. Brackets and Stainless Steel plug 40
mm including painting of fittings and brackets,
cutting and making good the walls wherever
required.

19.10A.1 a) Kitchen sink with drain board

19.10A.1.1 i) 510x1040mm bowl depth 178 mm Each 1

19.11 5 Providing and Fixing white vitreous china

laboratory sink with C.I. Brackets , C.P Brass
chain with rubber plug 40mm C.P. brass waste
and 40mm C.P. Brass trap with necessary
C.P. brass unions complete including painting
of fittings and brackets, cutting and making
good the walls wherever required.

19.11.2 a) Size 600x450x200 mm Each 1

19.12B 6 Providing and Fixing draining board with C.I. /

M.S. brackets including painting of brackets,
cutting and making good the walls whereever
required.

19.12B.1 a) White glazed Fire clay draining board of size

600 x 450 x25 mm Each 1

19.34A 9 Providing and fixing P.V.C waste pipe for sink

or wash basin including P.V.C waste fittings
complete.

19.34A.1 a) Semi rigid pipe

BOQ 3
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Ref. DSR
2002 S.No Description Unit Qty. Rate
19.34A.1.2 I) 40mm dia Each 50

19.42 10 Providing and fixing 600x450 mm bevelled

edge mirror of superior glass (of approved
quality) complete with 6mm thick hard board
ground fixed to wooden cleats with C.P. brass
screws and washers complete.
Each 24

19.43 11 Providing and Fixing 600x120x5 mm glass

shelf with edges round of supported on
anodised aluminimum angle frame with CP
Brass brackets and guard rail complete fixed
with 40 mm long screws, rawl plugs etc.
complete
Each 24

19.45 12 Providing and fixing toilet paper holder

19.45.1 a) CP Brass Each 12

19.45.2 b) Vitreous china Each 12

19.100 13 Providing and fixing PTMT Waste Coupling

for wash basin and sink of approved quality,
colour and make (Pryag or Equivalent)

19.100.1 (i) Waste Coupling 31 mm of 79 mm length and

62 mm breadth weighing not less than 45 gms
Each 25

19.100.2 (ii) Waste Coupling 38 mm of 83 mm length and

77 mm breadth weighing not less than 60 gms
Each RO

19.101 14 Providing and fixing PTMT Bottle Trap for

Wash Basin and sink (Prayag or equivalent)
Each 24

20.10 15 Providing and Fixing ball valve (brass) of

approved quality complete

a) High or low pressure with plastic floats

I) 50 mm nominal bore Each 24

20.13 16 Providing and Fixing unplasticised PVC

connection pipes with Brass unions

20.13.1 a) 30 cm length

20.13.1.1 i) 15 mm nominal bore Each RO

BOQ 4
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Ref. DSR
2002 S.No Description Unit Qty. Rate
20.14 17 Providing and Fixing CP Brass shower rose
with 15 mm or 20 mm inlet

20.14.1 a) 100 mm diameter Each 15

20.90 18 Providing and fixing C.P. brass bib cock of

approved quality conforming to IS:8931 -
15mm nominal bore. Each 24

20.92 19 Providing and fixing C.P. brass long body bib

cock of approved quality conforming to IS
standards and weighing not less than 690
gms. - 15mm nominal bore. Each 304

20.93 20 Providing and fixing C.P. brass stop cock

(concealed) of standard design and of
approved make conforming IS:8931 - 15mm
nominal bore. Each 2

20.94 21 Providing and fixing C.P. brass angle valve for

basin mixer and gyser points of approved
quality conforming to IS:8931 - 15mm nominal
bore. Each 1

20.99 25 Providing and fixing PTMT (An Engineering

thermoplastic) push cock of approved quality
colour and make (Prayag or equivalent)

20.99.1 i) 15mm nominal size, with 20mm B.S.P.

Female threads, 100mm long, 57 mm high
and 33 mm wide with 12mm seat dia. and
replaceable washers, weighing not less than
90 gms.
Each 24

20.108 26 Providing and fixing PTMT soap dish holder

having length of 138 mm, breadth 102mm,
height of 75 mm with concealed fitting
arrangements, weighing not less than 110
gms (Prayag or equivalent)
Each 24

TOTAL

Add
Anticipated Tender appreciation on DSR
Rates 2002 42.17%

TOTAL C/O TO SUMMARY

BOQ 5
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Ref. DSR
2002 S.No Description Unit Qty. Rate

(I-B) SANITARY FIXTURES / C.P FITTINGS

(NON-DSR ITEMS)

1 Providing & fixing vitreous china Oval wash

basin 570x425mm dia. for under counter
mounting, specially fabricated brackets
painted white, 32mm C.P.cast brass bottle
trap and connection pipe to wall with C.P. wall
flange and rubber adopter for waste conne

1.1 White colour Each 2

2 Providing and fixing automatic sensor

operated (Electrical) for automatic flushing
of urinals complete in all respect including
cutting and making good the walls wherever
required.
Each 1

3 Providing and fixing C.P brass twin coat hook

fixed to wooden cleats with CP Brass Screws
complete each. Each 24

4 Providing and fixing white vitreous China

Urinal Partition of 690 x 325mm size fixed with
expandable anchor fasteners with CP Brass
bolts and washers, embedded in wall and set
in cement concrete, complete including cutting
and making good the walls wherev

Each 5

5 Providing and fixing wall mounted single hole

sink mixer with swinging spout complete,
including cutting and making good the walls
wherever required. Each 1

BOQ 6
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Ref. DSR
2002 S.No Description Unit Qty. Rate
6 Providing and fixing 15mm dia C.P. single
hole mixer for Wash Basin. Each 24

7 Providing and fixing C.P brass airpurifier

container, fixed to wooden cleats with C.P
brass screws, complete including cutting and
making good the walls wherever required.
Each 24

8 Providing and fixing C.P brass towel rail of

size 610mm long and 20mm dia, complete
with C.P brass brackets fixed to wooden
cleats with C.P. brass screws. Each 15

9 Providing and fixing C.P. brass towel ring

fixed to wooden cleats with C.P. brass
screws including cutting and making good the
walls wherever required. Each 24

10 Providing and Fixing CP Health Faucet with 1

mt Flexible Tube and Wall Hook complete
Each 24

11 Providing and fixing S.S Liquid Soap

container complete with wooden cleats & S.S.
screws Each 24

12 Providing and fixing single heater type solid

state fully hygenic no touch Hand Drier rated
for continuous repeat usage with solid state
time delay LSF protection, with independent
ambient light level & seasonal control
temperatures including providing ne
Each 24

13 Providing and fixing Grab Bar with Stainless

Steel Screws on wooden cleats Each 1

14 Providing and fixing 15mm C.P hands shower

with shower arm with wall hook including
cutting and making good the walls, wherever
required. Each 5

TOTAL C/O TO SUMMARY

BOQ 7
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Ref. DSR
2002 S.No Description Unit Qty. Rate

(II-A) SOIL, WASTE AND VENT PIPES ( DSR ITEMS )

2.8 1 Earth work in excavation in foundation

trenches or drains (not exceeding 1.5m in
width or 10 Sqm on plan) including dressing of
sides and ramming of bottoms, lift upto 1.5m,
including getting out the excavated soil and
disposal of surplus ecavated soil a

a) All kind of soil

i) Pipes etc. exceeding 80mm dia but not

exceeding 300mm dia. Cu. M 100

12.39 2 Making khurras 45x45cm with average

mininmum thickness of 5 cm cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 stone
aggregate of 20mm nominal size) over P.V.C
sheet 1mx1mx400 micron, finished with 12mm
cement plaster 1:3 (1 cement : 3 coarse sand)
an
Each 5

12.78 3 Providing & Fixing on wall face unplasticised -

rigid PVC rain water pipes conforming to
IS:13592 type A including jointing with seal
ring conforming to IS:5382 leaving 10 mm gap
for thermal expansion.

i) 110mm dia Metre 50

ii) 75 mm dia Metre 70

12.80 4 Providing & Fixing unplasticised - PVC pipe

clips of approved design to unplasticised -
PVC rain water pipes by means of
50*50*50mm hard wood plugs, screwed with
MS screws of required length including cutting
brick work and fixing in cement mortar 1:4 (1

i) 110mm dia Each 25

BOQ 8
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Ref. DSR
2002 S.No Description Unit Qty. Rate

12.79 5 Providing and Fixing on wall face

unplasticised - PVC moulded fittings /
accessories for unplasticised - Rigid PVC rain
water pipes confirming rto IS: 13592 Type A
including jointing with seal ring confirming to
IS: 5382 leaving 10 mm gap for thermal exp

12.79.5 i) Bend 87.5 0

a) 110 mm bend Each 5

b) 75 mm bend Each 5

12.79.6 ii) Shoe (Plain)

a) 110 mm Shoe Each 5

b) 75 mm Shoe Each 5

12.81 6 Providing & Fixing to the inlet mouth of rain

water pipe cast iron grating 15 cm diametre
and weighing not less than 440 grams
Each 10

19.48 6 Providing and Fixing soil, waste and vent

pipes:

i) Sand Cast Iron S & S pipe

19.48.1 a) 100 mm dia Metre 370

19.48.1 b) 75 mm dia Metre 25

19.49 7 Providing and fixing M.S. holder-bat clamps of

approved design to Sand Cast iron/cast iron
(spun) pipe embedded in and including
cement concrete blocks 10X10X10cm of 1:2:4
mix (1 cement : 2 coarse sand : 4 graded
stone aggregate 20mm nominal size) includi

19.49.1 a) For 100mm dia. Pipe Each 100

19.50 8 Providing and fixing bend of required degree

with access door, insertion rubber washer
3mm thick, bolts and nuts complete

19.50.1.1 a) Sand cast iron S&S

i) 100 mm Each 10

BOQ 9
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Ref. DSR
2002 S.No Description Unit Qty. Rate

19.51 9 Providing and fixing plain bend of required

degree.

a) Sand cast iron S&S

19.51.1 (i) 100mm Each 10

19.52 10 Providing and fixing heel rest sanitary

bend

a) Sand cast iron S&S

i) 100 mm dia Each 2

19.55 11 Providing and fixing single equal plain junction

of required degree with access door, insertion
rubber washer 3mm thick, bolts and nuts
complete.

a) Sand cast (spun) iron S&S

i) 100x100x100mm Each 5

19.59 12 Providing and Fixing single unequal junction of

required degree with access door insertion
rubber wash 3 mm thick, bolts and nuts
complete.

19.59.1 a) 100x100x75 mm

19.59.1.1 i) Sand Cast Iron S & S Each 5

19.67 13 Providing and Fixing terminal guard

19.67.1 a) Sand Cast Iron S & S

(i) 100 mm Each 5

19.68 14 Providing and Fixing collar:

i) Sand Cast Iron S & S

19.68.1 a) 100mm Each 10

19.68.2 b) 75mm Each 2

19.70 15 Providing lead caulked joints to sand cast

iron/centrifugally cast (spun) iron pipes and
fittings of diameter.

BOQ 10
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Ref. DSR
2002 S.No Description Unit Qty. Rate
19.70.1 i) 100mm Each 10

BOQ 11
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Ref. DSR
2002 S.No Description Unit Qty. Rate

19.71 16 Providing and fixing M.S. stays and clamps for

sand cast iron/centrifugally cast (spun) iron
pipes and fittings of diameter:

19.71.1 a) 100mm Each 25

19.72 17 Providing and Fixing trap of self cleansing

design with screwed down or hinged grating
with or without vent arm complete, including
cost of cutting and making good the walls and
floors

19.72.2 i) 100mm inlet and 75 mm outlet

a) Centrifugally cast iron Each 26

19.96 18 Painting of sand cast iron / centrifugally cast

(spun) iron soil, waste, vent pipes and fittings
with paint of any color such as chocolate, grey
or buff etc. over a coat of primer (of approved
quality) for new work:

19.96.2 i) 100mm dia. Pipe Metre 370

19.96.3 ii) 75mm dia. Pipe Metre 25

20.2 19 Providing & fixing G.I. pipe to IS:1239

(medium class) complete with G.I. fittings,
clamps and hinges including cutting and
making good the walls and ceiling for waste
pipes, bath wastes, overflow, kitchen
equipment waste connections and condensate
draina

20.2.1.4 a) 32 mm nominal bore for wash basin Metre 55

20.2.1.5 b) 40 mm nominal bore for wash basin Metre 5

20.2.1.6 c) 50 mm nominal bore for wash basin Metre 25

20.78 20 Painting of G.I. pipes with two coats of

bitumastic paint wrapping polythene tape &
applying the final coat of bitumastic paint.

20.78.4 a) 32mm nominal bore Metre 55

20.78.5 b) 40mm nominal bore Metre 5

20.78.6 c) 50mm nominal bore Metre 25

BOQ 12
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Ref. DSR
2002 S.No Description Unit Qty. Rate

21.1 21 Providing, laying and jointing glazed

stoneware pipe grade 'A' with stiff mixture of
cement mortar in the proportion of 1:1 (1
cement : 1 fine sand) including testing of joints
etc. complete.

21.1.1 21.1 100 mm diameter Metre 15

21.2 22 Providing and laying cement concreate 1:5:10

(1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) alround S.W.
pipes including bed concrete as per standard
design:

21.2.1 22.1 100 mm diamter S.W. pipe Metre 15

21.4 23 Providing and fixing square-mouth S.W. gully

trap grade 'A' complete with C.I. grating brick
masonry chamber with water tight C.I. cover
with frame of 300X300 mm size(inside) the
weight of cover to be not less than 4.50 kg
and frame to be not less than 2.

a) With FPS Bricks class designation 75

21.4.1 i) 100x100mm size P type Each 6

21.11 24 Constructing brick masonry manhole in

cement mortar 1:4 (1 cement : 4 coarse sand),
RCC top slab with 1:2:4 mix (1 cement : 2
coarse sand: 4 graded stone aggregate 20mm
nominal size) foundation concrete 1:4:8 mix (1
cement : 4 coarse sand; 8 graded stone

21.11.2 i) Inside size 90x80cms and 60cms deep

including C.I. Cover with frame (light duty)
455x610mm internal dimensions total weight
of cover and frame to be not less than 38 kg
( wt. of cover 23 kg and wt. of frame 15 kg).
Each 6
ii) Inside size 90x120cms and 90cms deep
including C.I. Cover with frame (light duty)
455x610mm internal dimensions total weight
of cover and frame to be not less than 38 kg
( wt. of cover 23 kg and wt. of frame 15 kg).
Each 5

BOQ 13
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Ref. DSR
2002 S.No Description Unit Qty. Rate

20.27 25 Providing and Laying S & S centrifugally cast

(spun) iron pipes (Class LA) confirming to IS :
1536

20.27.2 i) 100 mm dia pipe Metre 5

20.27.3 ii) 150 mm dia pipe Metre 5

TOTAL

Add
Anticipated Tender appreciation on DSR
Rates 2002 42.17%

TOTAL C/O TO SUMMARY

BOQ 14
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Ref. DSR
2002 S.No Description Unit Qty. Rate

(II-B) SOIL, WASTE & VENT PIPES, RAIN WATER

PIPES & FITTINGS
(NON-DSR ITEMS)

1 Providing and fixing Sand Cast 'P' or 'S' trap of

self cleaning design with or without vent with
provision for connecting G.I inlet fittings
complete including cost of cutting and making
good the walls and floors wherever required.
Each 26

2 Providing and fixing 100mm dia G.I. inlet fitting

consisting of 100mm dia main G.I pipe with
multiple G.I. sockets (Inlets) of required
diameter welded to it (as per site requirement)
and fixing the same to C.I trap and setting in
cement concrete, comple
Each 26

3 Providing and fixing cast brass Floor Clean

Out plug with suitable insert keys for opening,
male threaded joint with G.I. socket, lead
caulked to soil pipe / waste pipe of C. I.
and C.I. (LA) pipe as required, complete as
shown in attached sket

a) 100mm dia Each 32

4 Providing and fixing G.I floor drain consisting

of 100x50mm G.I elbow (grating and G.I pipe
to be paid separately), complete as per
instructions. Each 16

5 Providing & laying cement concrete 1:2:4 mix

(1 cement : 2 coarse sand: 4 stone aggregate
20mm and down gauge) 75mm in bed and
pipe.

a) For 100mm, 75mm and 50mm dia pipes under

floor including centering & shuttering wherever
required. Metre 85

BOQ 15
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Ref. DSR
2002 S.No Description Unit Qty. Rate

6 Providing and fixing 125mm dia Bronze

Chrome plated ring and Grating with 2
stainless steel screws, ring to be embedded in
floor with salient / seal . Each 42

7 Making Khurras 30x30 cms with average

minimum thickness of 5 cm cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate of 20 mm nominal size) over
P.V.C sheet 1 m x 1 m x 400 micron, finished
with 12 mm cement plaster 1:3 (1 cement : 3
Each 5

8 Providing drip seal joints to cast Iron /

Centrifugally cast iron pipes and fittings

a) 100mm dia Each 10

(ii) 75mm dia. Each 2

TOTAL C/O TO SUMMARY

BOQ 16
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Ref. DSR
2002 S.No Description Unit Qty. Rate

(III-A) WATER SUPPLY (INTERNAL & EXTERNAL)

DSR ITEMS

20.2 1 Providing and fixing G.I. Pipes complete with

G.I. fittings and clamps, including cutting and
making good the walls etc. (internal work)

20.2.1 a) Exposed on wall and shaft

20.2.1.1 (i) 15mm dia. Nominal bore Metre 20

20.2.1.2 (ii) 20mm dia. Nominal bore Metre 80

20.2.1.3 (iii) 25mm dia. Nominal bore Metre 65

20.2.1.4 (iv) 32mm dia. Nominal bore Metre 50

20.2.1.5 (v) 40mm dia. Nominal bore Metre 30

20.2.1.6 (vi) 50mm dia. Nominal bore Metre 15

20.2.1.6 (vii) 65mm dia. Nominal bore Metre 10

20.2.2 2 Concealed pipe including painting with anti

corrosive bitumastic paint, cutting chases and
making good the wall.

(i) 15mm dia. Nominal bore Metre 345

(ii) 20mm dia. Nominal bore Metre 45

(iii) 25mm dia. Nominal bore Metre 10

20.9 3 Providing and fixing gun metal gate valve with

C.I.,wheel of approved quality (screwed end)

a) 40mm dia nominal bore Each 2

b) 50mm dia nominal bore Each 2

c) 65mm dia nominal bore Each 1

BOQ 17
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Ref. DSR
2002 S.No Description Unit Qty. Rate

20.11 4 Providing and fixing gun metal non-return

valve of approved quality (screwed end)

(a) 50mm dia nominal bore Each 1

(b) 65mm dia nominal bore Each 1

(c) 80mm dia nominal bore Each 1

20.76 5 Painting G.I. Pipes and fittings with synthetic

enamel white paint over a ready mixed priming
coat, both of approved quality for new work.

20.76.1 (i) 15mm diameter pipe Metre 20

20.76.2 (ii) 20mm diameter pipe Metre 80

20.76.3 (iii) 25mm diameter pipe Metre 65

20.76.4 (iv) 32mm diameter pipe Metre 50

20.76.5 (v) 40mm diameter pipe Meter 30

20.76.6 (vi) 50mm diameter pipe Meter 15

20.87 6 Providing and fixing G.I. Union in G.I. Pipe

including cutting and threading the pipe and
making long screws etc. complete (new work)

20.87.2 (ii) 15mm dia. Nominal bore Each 2

20.87.2 (ii) 20mm dia. Nominal bore Each 10

20.87.3 (iii) 25mm dia. Nominal bore Each 8

20.87.4 (iv) 32mm dia. Nominal bore Each 10

20.87.5 (v) 40mm nominal bore dia pipe Each 10

20.87.6 (vi) 50mm nominal bore dia pipe Each 2

20.87.7 (vii) 65mm nominal bore dia pipe Each 2

TOTAL

Add
Anticipated Tender appreciation on DSR
Rates 2002 42.17%

BOQ 18
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Ref. DSR
2002 S.No Description Unit Qty. Rate
TOTAL C/O TO SUMMARY

BOQ 19
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Ref. DSR
2002 S.No Description Unit Qty. Rate

(III-B) WATER SUPPLY SYSTEM (NON-DSR ITEMS)

1 Providing and fixing thermal insulation over

hot water pipes in chase (internal) with 6 mm -
9mm thick 'Kaiflex' or approved equivalent
thermal insulation tubing, a elastomeric
flexible material having hermetic blister closed
cell structure of expanded sy

a) For 15mm Dia or Equivalent Metre 85

b) For 20mm Dia or Equivalent Metre 10

c) For 25mm Dia or Equivalent Metre 10

2 Providing and fixing forged brass lever

operated ball valve of full flow with forged
brass ball (Machined to mirror smooth finish
with hard chrome plated) and spindle with
setting and gland of superior quality having
minimum working pressure of 10 kg/cm2

a) 15mm dia Each 36

a) 20mm dia Each 4

b) 25mm dia Each 2

TOTAL C/O TO SUMMARY

BOQ 20
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Ref. DSR
2002 S.No Description Unit Qty. Rate

(IV-A) FIRE FIGHTING SYSTEM (DSR ITEMS)

2.10 1 Excavating trenches of required width for

pipes etc. including excavation for sockets,
and dressing of sides, ramming of bottoms
depth upto 1.5 m, including getting out the
excavated soil, and then returning soil as
required, in layers not exceeding 20cm

2.10.1 All kinds of soil

2.10.1.1 a) Pipes etc. not exceeding 80mm dia. Metre 5

Add Anticipated Tender appreciation on DSR Rates 2002

BOQ 21
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Ref. DSR
2002 S.No Description Unit Qty. Rate

(IV-B) FIRE FIGHTING SYSTEM (NON DSR ITEMS)

1 Providing and fixing M.S pipes confirming to

IS:1239 (Heavy Class) including all fittings like
anchor fastners, couplings, bends, elbows,
tees etc., welded or screwed joints as
required, cutting holes and chased in brick or
RCC walls and making good compl

a) 65mm dia Metre 25

b) 50mm dia Metre 30

c) 40mm dia Metre RO

d) 20mm dia Metre 15

2 Painting of exposed pipes with two or more

coats of synthetic enamel paint of approved
shade as per pipe colour code including
painting of legends in English & Devanagari
with direction arrows.

a) 65mm dia Metre 25

b) 50mm dia Metre 30

c) 40mm dia Metre RO

d) 25mm dia Metre 15

3 Providing and fixing standard mild steel

flanges, (only in valves, strainers, expansion
joint and pumps matching flanges) screwed or
welded complete with 1.5mm thick
compressed asbestos gasket, nuts, bolts and
washers etc., complete including testing

a) 80mm dia Each 2

b) 65mm dia Each 2

4 Providing and fixing of gunmetal body, fullway

valve with wheel tested to 20 Kg/cm2
(I.S:778-1971, Class - II) of approved quality .

a) 25mm nominal bore Each 5

BOQ 22
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Ref. DSR
2002 S.No Description Unit Qty. Rate

5 Providing and fixing butterfly valves, wafer end

type class PN 1.6 as per I.S:13095 or
BS:5155, including necessary nuts, bolts,
gaskets etc. complete (without gear box)

a) 65mm dia nominal bore. Each 1

b) 80mm dia nominal bore. Each 1

6 Providing and fixing 25mm dia. C.I. air valve,

single acting including the cost of all pipes and
fittings as per standard design and site
conditions complete in all respects, (excluding
the gate valve).
Each 1

7 Providing and fixing of gunmetal body

screwed ends Gate Valves in accordance with
IS 778. To be tested at 20kg/cm2 with unions.

a) 25mm dia Each 5

8 Providing and fixing first aid fire hose-reel wall

mounting swinging type fitted with 36.5m x
20mm dia high pressure rubber hose to
IS:5132 with 5mm outlet gunmetal nozzle with
shutoff valve as per IS:884-1969 complete in
all respect.
Each 5

9 Providing and fixing standard fire man's axe

with heavy duty insulated rubber handle.
Each 1

10 Providing and fixing M.S structural work

fabricated from standard sections e.g. M.S.
rounds, angles, channels, plates including
cutting to size, welding, drilling with concrete
drilling bits and fixing dash fasteners in RCC
structural members as directed

Kg. 150

11 Providing and fixing ISI marked portable fire

extinguisher including fixing flanges, hose,
brackets, screws to required size.

a) Water CO2 type of 9 lit.as per IS: 940 Each 5

b) ABC Type (Mono Powder type -Amonium

phosphate) Each 5

BOQ 23
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Ref. DSR
2002 S.No Description Unit Qty. Rate
c) Dry Chemical Powder type of 5 Kg as per
IS:2171 Each 5

BOQ 24
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Amount

BOQ 25
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Amount

BOQ 26
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Amount

BOQ 27
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Amount

BOQ 28
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Amount

BOQ 29
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Amount

BOQ 30
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Amount

BOQ 31
 PLUMBING AND FIRE FIGHTING WORKS (LOW SIDE)

Amount

BOQ 32