18850 Adams Ct Phone: 408/738-3959
Morgan Hill, CA 95037 Toll Free (U.S.): 800/777-6405
www.AircraftCovers.com Fax: 408/738-2729
Email: bruce@aircraftcovers.com
manufacturer of the finest custom-made aircraft covers
Tech Sheet: Falcon Jet 7X
(falcon-jet-F7X.pdf)
Falcon 7X Engine Cover Set, Pitot Covers
Section 1: Canopy/Cockpit/Fuselage Covers
The Falcon Jet 7X Cockpit Cover helps reduce damage to the upholstery and avionics caused by excessive heat and can
eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help
prevent vandalism and theft.
The Falcon Jet 7X Cockpit Cover is designed to cover the windshield and side windows of the cockpit. Attachment buckles are
made of nonmetal Delrin, designed for rugged outdoor use. The windshield cover comes with a duffle bag. The N-number can be
imprinted onto the cover for an extra charge. The windshield cover is trimmed in the colors of the aircraft.
This cover type is made from Silver Acrylic Sunbrella canvas and is 100% lined with a soft and smooth microfiber. Bruce's Custom
Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for
water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching.
The material is very reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on
the hottest of days. It is water, ice and snow repellent, yet breathable to allow moisture to escape from between the cover and the
aircraft surface.
The Falcon Jet 7X Cockpit/Nose Cover helps reduce damage to the upholstery and avionics caused by excessive heat and can
eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help
prevent vandalism and theft.
The Falcon Jet 7X Cockpit/Nose Cover is designed to cover the windshield and side windows of the cockpit. Attachment buckles
Technical Sheet: Falcon Jet 7X Page 1
are made of nonmetal Delrin, designed for rugged outdoor use. The windshield cover comes with a duffle bag. The N-number can
be imprinted onto the cover for an extra charge. The windshield cover is trimmed in the colors of the aircraft.
This cover type is made from Silver Acrylic Sunbrella canvas and is 100% lined with a soft and smooth microfiber. Bruce's Custom
Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for
water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching.
The material is very reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on
the hottest of days. It is water, ice and snow repellent, yet breathable to allow moisture to escape from between the cover and the
aircraft surface.
Description Part Number Price
COCKPIT COVER F7X-000 $1495.00
COCKPIT COVER, also covers door F7X-010 $1900.00
COCKPIT/NOSE COVER F7X-015 $3400.00
Section 2: Engine Covers
Tri-Fold Ring Engine Covers are designed to install easily yet be completely storable. A spring steel hoop is sewn into the hem of
each cover, allowing them to be installed without climbing onto the wing or using a stepladder in many cases. To store the covers
the spring steel hoop folds like a band-saw blade into three nesting rings. Each cover folds into a compact circular bundle which is
stored in the included duffle bag, yet they unfold quickly for use. The Tri-Fold Ring cover is made of medium weight Solution-Dyed
Polyester which is available in a variety of colors to match the paint trim. Each cover set comes complete with installation and
folding instructions. The aircraft's registration number can be silkscreened onto the cover for an extra charge.
ALL-YEAR USE MATERIAL - Made with Solution dyed Polyester fabric, the all-year use material is the best option for sun
protection and cover longevity. This heavier more durable material is intended for all weather conditions, such as rain and snow or
lots of sun.
The Falcon Jet 7X Bikini Style Engine Covers are a single-piece design using a soft and smooth stretchy and fabric. The cover
stretches tightly over both the intake and exhaust, installing quickly and easily. These covers are designed to be used as hangar
dust covers and have a useful life of approximately one year.
The Falcon Jet 7X Intake Covers are designed to install easily yet be completely storable. A spring steel hoop is sewn into the
hem of each cover, allowing them to be installed without climbing onto the wing or using a stepladder. To store the covers the spring
steel hoop folds like a band-saw blade into three nesting rings. Each cover folds into a compact circular bundle which is stored in
the included duffle bag, yet they unfold quickly for use. The Tri-Fold Ring cover is made of medium weight nylon which is available
in a variety of colors to match the paint trim. Each cover set comes complete with installation and folding instructions. The aircraft's
registration number can be silkscreened onto the cover for an extra charge.
Cessna Citation 680 Engine Cover, Bikini Type Falcon 7X Engine Covers (Outboard Engines & Center Exhaust)
Technical Sheet: Falcon Jet 7X Page 2
Part
Description Price
Number
ENGINE COVERS (outboard engines only, attaches w/ hooks) (set of 4) F7X-100 $1100.00
INTAKE COVERS (outboard engines only) (set of 2) F7X-101 $920.00
INTAKE/EXHAUST COVERS for engines #1 & #3, includes #2 exhaust (attaches with hooks) (set of 5) F7X-105 $1360.00
INTAKE/EXHAUST COVERS for engines #1 & #3 (inboard/outboard straps) (set of 4) F7X-110 $1100.00
INTAKE/EXHAUST COVERS for engines #1 & #3, includes #2 exhaust (inboard/outboard straps) (set of
F7X-115 $1360.00
5)
CENTER ENGINE EXHAUST COVER F7X-117 $335.00
ENGINE COVERS, Hangar Use, Bikini Type, (outboard engines only) (set of 2) F7X-130 $905.00
EXHAUST COVERS (outboard engines only) (set of 2) F7X-140 $640.00
Section 3: Plugs & Protection
The Falcon Jet 7X Pitot Tube Covers, made of Naugahyde vinyl, are designed to cover the entire pitot assembly. Slipping on over
the tube, the cover tightens around the base with a special Velcro strap detail. A "remove before flight" streamer is attached to the
cover. Heat Resistant Pitot Covers are designed to help prevent the pitot cover from melting onto the tube if the pitot heat is
accidentally turned on with the pitot cover attached. If you want the set tethered together, please let us know.
The Engine Exhaust Plugs are custom fit for your Falcon Jet 7X exhaust openings, made with heavy-duty vinyl material, and
stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if
necessary. Exhaust plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the
aircraft registration number in black for an extra charge. Exhaust plugs may be inserted soon after flight when the engine is still
warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.
The Engine Inlet Plugs are custom fit for your Falcon Jet 7X intakes, made with heavy-duty vinyl material, and stuffed with a single
block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs
have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number
in black for an extra charge. Storage bag NOT included. Engine plugs may be inserted after flight when the engine is still warm.
Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.
Falcon Jet 7X Pitot Probe/Aoa Set, Heat Resistant Type Falcon Jet 7X Pitot Probe/Aoa Set, Heat Resistant Type
Description Part Number Price
INTAKE PLUGS (folding type) (set of 2) F7X-102 $1075.00
INTAKE PLUGS (non-folding type) (set of 2) F7X-103 $880.00
Technical Sheet: Falcon Jet 7X Page 3
EXHAUST PLUGS (non-folding type) (set of 3) F7X-120 $1065.00
EXHAUST PLUGS (folding type) (set of 3) F7X-125 $1190.00
PITOT & TAT COVERS, heat resistant type (set of 6) F7X-200 $580.00
APU EXHAUST PLUG F7X-505 $220.00
Section 4: Wing/Tail/Empennage Covers
The Falcon Jet 7X Wing Covers are a perfect solution to protect your paint from sun damage and prevent winter frost, snow, ice
buildup, and corrosion. They are made from Solution-Dyed Polyester or Acrylic Sunbrella and form-fit to slip around each wing tip,
cover the entire upper surface of the wing and wrap around the leading and trailing edges. The covers secure under the wing with
adjustable straps from the trailing edge to the leading edge. The wing covers can also attach to each other with adjustable straps at
the leading and trailing edges of the wing under the belly of the plane. In some instances, cut-outs are made in the trailing edge of
the wing covers to accommodate static wicks. We have the ability to also accommodate wing tip modifications, such as STOL kits,
droop tips, and vortex generators. Wing covers are labeled LEFT and RIGHT for your convenience. Wing Covers are available for
winter use or long-term, all-year use. A Hail Protection version can be made which incorporates very dense closed cell foam into the
entire upper surface of the wing covers to help prevent hail damage. Although these covers are bulky, they do help protect your
wing and control surfaces against small to medium-size hail.
ALL-YEAR USE MATERIAL - Made with Silver Acrylic Sunbrella canvas, the all-year use material is the best option for sun
protection and cover longevity. This heavier more durable material is intended for all weather conditions, such as rain and snow or
lots of sun.
WINTER USE MATERIAL - Made with Solution-Dyed Polyester fabric, this option is intended for seasonal use to aid in deicing, rain
mitigation, or for occasional travel. The material is lighter and more compact, but more susceptible to UV damage and may have a
shorter useful life if used continuously outside than the all-year use material.
Description Part Number Price
WING COVERS (set of 2) F7X-300 $4720.00
Section 5: HeatShields & Sun Reflectors
Cockpit Heatshields are interior sunshades for the aircraft's cockpit. The product is a unique composite of closed-cell foam with a
silver mylar finish. The semi-rigid design is stiff enough to stand inside the window framing. The set folds up flat and is easily stored
in the included storage sleeve. Some designs may require velcro and suction cups. Our Heatshields for jets are offered white side
out because some aircraft manufacturers have issued advisories against reflective window inserts due to potential heat damage. A
Heatshield is an excellent short-term remedy for cockpit overheating, but an external fabric cover is more effective for long-term
protection.
Description Part Number Price
COCKPIT HEATSHIELDS (set of 4) F7X-900 $505.00
Section 6: Miscellaneous Products
Tire or Wheelpant Covers are designed to protect the wheelpants, or the tires and wheels, from sun damage and damage from the
tow bar when moving the airplane.
ALL-YEAR USE MATERIAL - Made with Silver Acrylic Sunbrella canvas, the all-year use material is the best option for sun
protection and cover longevity. This heavier more durable material is intended for all weather conditions, such as rain and snow or
lots of sun.
Description Part Number Price
Technical Sheet: Falcon Jet 7X Page 4
NOSE GEAR TIRE COVERS (set of 2) F7X-450 $440.00
WING LEADING EDGE PROTECTORS (set of 4) F7X-800 $1895.00
WINGLET EDGE PROTECTORS (set of 2) F7X-805 $1090.00
Section 7: Light Weight Products: Travel Covers and FlyAway Covers
The Falcon Jet 7X Cockpit Cover helps reduce damage to the upholstery and avionics caused by excessive heat and can
eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help
prevent vandalism and theft.
The Falcon Jet 7X Cockpit Cover is designed to cover the windshield and side windows of the cockpit. Attachment buckles are
made of nonmetal Delrin, designed for rugged outdoor use. The windshield cover comes with a duffle bag. The N-number can be
imprinted onto the cover for an extra charge. The windshield cover is trimmed in the colors of the aircraft.
This cover type is made from Silver Acrylic Sunbrella canvas and is 100% lined with a soft and smooth microfiber. Bruce's Custom
Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for
water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching.
The material is very reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on
the hottest of days. It is water, ice and snow repellent, yet breathable to allow moisture to escape from between the cover and the
aircraft surface.
The Falcon Jet 7X Cockpit/Nose Cover helps reduce damage to the upholstery and avionics caused by excessive heat and can
eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help
prevent vandalism and theft.
The Falcon Jet 7X Cockpit/Nose Cover is designed to cover the windshield and side windows of the cockpit. Attachment buckles
are made of nonmetal Delrin, designed for rugged outdoor use. The windshield cover comes with a duffle bag. The N-number can
be imprinted onto the cover for an extra charge. The windshield cover is trimmed in the colors of the aircraft.
This cover type is made from Silver Acrylic Sunbrella canvas and is 100% lined with a soft and smooth microfiber. Bruce's Custom
Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for
water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching.
The material is very reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on
the hottest of days. It is water, ice and snow repellent, yet breathable to allow moisture to escape from between the cover and the
aircraft surface.
Description Part Number Price
TRAVEL COVER, Light Weight Travel Cockpit Cover F7X-810 $1195.00
TRAVEL COVER, Light Weight Travel Cockpit Cover, also covers door F7X-815 $1515.00
TRAVEL COVER, Light Weight Travel Cockpit/Nose Cover F7X-820 $3935.00
Prices subject to change. Other Covers and Design Alterations: Prices on request.
Prices are FOB Morgan Hill, CA. Sales tax on orders shipped to California addresses. Orders take approximately 3 weeks
to complete. For domestic orders we normally ship by UPS ground service. Next day shipping and air parcel post is
available on request. We can take payment by Visa, Mastercard, American Express, or Discover.
Bruce's Custom Covers offers protective covers and plugs for virtually every type of airplane, jet and helicopter. If you
have questions about our products please call any time TOLL FREE: 800/777-6405, or FAX: 408/738-2729.
Technical Sheet: Falcon Jet 7X Page 5
Technical Sheet: Falcon Jet 7X Page 6
