Scribd
Upload
136 views2 pages

DTR Series

The DTR Deep Tillage Ripper is designed for use with tractors between 450-600 horsepower. It features alloy steel shanks that can penetrate soil to a depth of 39 inches and are spaced 32 inches apart. The frame and components are reinforced to withstand stress. The ripper is 14,675 pounds and requires two rear hydraulic circuits from the tractor for operation.

Uploaded by

VladimirCarrillo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
136 views2 pages

DTR Series

The DTR Deep Tillage Ripper is designed for use with tractors between 450-600 horsepower. It features alloy steel shanks that can penetrate soil to a depth of 39 inches and are spaced 32 inches apart. The frame and components are reinforced to withstand stress. The ripper is 14,675 pounds and requires two rear hydraulic circuits from the tractor for operation.

Uploaded by

VladimirCarrillo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

 

Series: 
DTR Deep Tillage Ripper
For use with tractors in the 450 - 600hp range.

FEATURES:

• The abrasive resistant alloy steel shanks, flame cut to a parabolic curve, will shatter
the toughest hardpan to a depth of 39" (610 mm).

• Shanks set at 32" (813 mm) spacing with shear bolt protection.

• T1 wear strips and armor cover the entire shank and are easily replaceable.

• Fabricated hard-surfaced points are standard.

• Designed for maximum clearance and weight transfer to drawbar of tractor.

• The hitch, mainframe and shank holding plates are well braced and designed to
alleviate lateral and torsional stress and are all low hydrogen welded.
Scan the code to visit our 
website today: 
www.romeplow.com 
     
                
S

Specifications:
Series DTR Deep Tillage Ripper
Max   Transport  Overall  Net 
Model  Number  Suggested Engine 
Penetration  Width  Width   Weight 
Number  of Shanks  Horsepower 
in  (mm)  ft/in  (m)  ft/in  (m)  lbs  (kg) 
DTR‐539  5  39”  (991)  11’‐5” (3.5) 16’‐0” (4.9) 450 ‐ 600   14,675 (6657)
                      NOTE: This subsoiler requires hydraulic control. Two rear tractor hydraulic circuits required for subsoiler operation.

Standard Equipment:
• Center “V” frame is all welded box type construction made of 6” (152mm) x 8” (203mm) x 3/8” (10mm)
rectangular tubing with 1/2” (13mm) x 6” (152mm) fishplates.
• Parabolic curved shanks are 1-3/4” (45mm) x 11” (279mm) x 42” (1.1m) 360 Brinell alloy steel with splitters
and replaceable fabricated hard-surfaced points.
• Bolt on hard surfaced fabricated points for shanks.
• Shear bolts are 1-1/4” (32mm) x 6” (152mm) grade 5.
• Two – 22.5 Super Single tires.
• Hydraulic control group includes one 5” (127mm) x 12” (305mm) drawbar cylinder, two 5” (127mm) x 20”
(508mm) transport cylinders, hoses, and quick couplers to reach the rear of the tractor.
• Cylinder lock assemblies for each cylinder rod keeps cylinder from retracting if pressure is lost while
transporting.
• Depth gauge rod provides leveling (frame) adjustment.

Rome Plow   
475 Sixth Street  Telephone: 770.748.4450 
P.O. Box 48  Fax: 770.748.4427 
  Cedartown, GA 30125, USA  Website: romeplow.com
 

You might also like