DSCE

INTRODUCTION OF THE COMPANY

Premier Irrigation® has been an integral part of India’s micro-irrigation development, the
Company is known for its unrivaled experience of over 50 years as a pioneer in the
manufacturing of modern irrigation equipment and systems in India. In 2008, it entered into a
joint venture with the Jordan-based Adritec Group International (AGI) and thus became Premier
Irrigation Adritec™ (PIAL). Decades of expertise and the pioneering spirit of the former coupled
with the considerable global experience in irrigation equipment of the latter means that PIAL
brings to customers the best of both worlds and a continuing commitment to maintaining quality,
performance and service.

The company’s journey in fact began in 1965 when – alongside the start of
manufacturing – it also took up a large-scale nationwide demonstration programme to introduce
Indian farmers and planters to the benefits of controlled irrigation that could save water and
boost yields. Traditional planters of tea, coffee, pepper and cardamom saw the benefits and
started to install irrigation systems for the first time. In agriculture, however, the financial
position of farmers demanded a different solution if micro-irrigation was to be taken up on a
large scale. At the same time, government and institutional thinking were moving away from
large dams and surface irrigation that had been the decades-old solution to providing irrigation
facilities. The resolution of this new methodology and fulfilling farmer needs was accomplished
by the Indian Government introducing a subsidy scheme for micro-irrigation that has grown into
today’s programme with millions of acres under micro-irrigation.

Over the years PIAL has had many achievements to its name, including being the
first to manufacture an inline dripline in India and for some time the only manufacturer of both
cylindrical and flat emitter inline driplines. In sprinkler irrigation, the development of the ultra-
high-pressure HDPE piping systems for arduous duty in tea and coffee plantations was pioneered
in India by PIAL.

In foreign markets, many developing agricultural economies benefit from PIAL’s

practical experience based on the very wide range of crops irrigated in India with its diverse
climatic and soil conditions and the need for practical and economic solutions. PIAL works with
local farmers to find a solution to their needs and ensure success drawing upon its
comprehensive range of equipment, experience and expertise.

1
DSCE

2
DSCE

BASIC PRODUCTS OF THE COMPANY

 SPRINKLERS
An irrigation sprinkler (also known as a water sprinkler or simply a sprinkler) is a device used to
irrigate agricultural crops, lawns, landscapes, golf courses, and other areas.

1. 110™

 110SS™ (single nozzle)

KEY FEATURES
 Exceptional durability proven by years of use

 Sealed bearings

 Even water distribution gives higher yield

 Many energy efficient models operate at lower pressure

 Connection size ¾” BSPM

3
DSCE

TECHNICAL SPECIFICATIONS

Application Rate in mm/hr

Nozzle Size Pressure Discharge Diameter at Spacing in Mtrs

mm BAR kPA L/m M3/Hr m 6X12 6X15 12X12

3.97 1.00* 100* 10.00 0.60 17.00 8.30 - -

(5/32")
2.00 200 14.50 0.87 22.25 12.00 9.60 6.00

3.00 300 18.33 1.10 25.90 15.20 12.20 7.60

4.00 400 20.50 1.23 27.12 17.00 13.60 8.50

4.37 1.00* 100* 11.83 0.71 17.37 9.80 - -

(11/64")
2.00 200 17.00 1.02 23.47 14.10 11.30 7.00

3.00 300 21.33 1.28 26.82 17.70 14.20 8.80

4.00 400 24.17 1.45 28.34 - 16.10 10.00

4.76 1.00* 100* 14.00 0.84 17.98 11.60 - -

(3/16")
2.00 200 20.00 1.21 24.69 16.80 13.40 8.40

3.00 300 25.17 1.51 27.74 - 16.70 10.50

4.00 400 29.00 1.74 29.57 - 19.30 12.10

5.16 1.00* 100* 16.33 0.98 18.89 13.60 - -

(13/64")
2.00 200 24.00 1.44 25.60 20.00 16.00 10.00

4
DSCE

Application Rate in mm/hr

Nozzle Size Pressure Discharge Diameter at Spacing in Mtrs

mm BAR kPA L/m M3/Hr m 6X12 6X15 12X12

3.00 300 29.33 1.76 28.95 - 19.50 12.20

4.00 400 33.67 2.02 30.78 - - 14.00

5.556 1.00* 100* 19.00 1.14 19.50 15.80 - -

(7/32")
2.00 200 27.00 1.62 26.82 - 18.00 11.20

3.00 300 33.33 2.00 30.17 - - 13.80

4.00 400 39.00 2.34 32.61 - - 16.20

 110+ST (twin nozzle)

KEY FEATURES

5
DSCE

 Exceptional durability proven by years of use

 Sealed bearings

 Even water distribution gives higher yield

 Many energy efficient models operate at lower pressure

 Sprinkler inlet: 20mm (3/4") BSP Male.

TECHNICAL SPECIFICATIONS

Nozzle Size Pressure Radius of Spray Discharge Application Rate in mm/hr

at Spacing in Mtrs

mm BAR m L/m M3/Hr 6X12 6X15 12X12

3.97x3.18 1.00* 8.38 15.83 0.95 13.19 - -

(5/32"x1/8")
2.00 11.28 23.33 1.4 - 15.56 9.72

3.00 12.80 29.33 1.76 - 19.56 12.22

4.00 13.56 33.17 1.99 - 22.11 13.82

4.37x3.18 1.00* 8.69 18.17 1.09 15.14 - -

(11/64"x1/8")
2.00 11.74 26.00 1.56 - 17.33 10.83

3.00 13.41 32.33 1.94 - 21.56 13.47

4.00 14.17 36.67 2.20 - 24.44 15.28

4.76x3.18 1.00* 8.99 20.33 1.22 16.94 - -

6
DSCE

(3/16"x1/8") 2.00 12.35 29.17 1.75 - 19.44 12.15

3.00 13.87 36.33 2.18 - 24.22 15.14

4.00 14.79 41.67 2.50 - 27.78 17.36

5.16x3.18 1.00* 9.45 22.83 1.37 19.03 - -

(13/64"x1/8")
2.00 12.80 32.83 1.97 - 21.89 13.68

3.00 14.48 40.33 2.42 - 26.89 16.81

4.00 15.39 46.50 2.79 - 31.00 19.38

5.56x3.18 1.00* 9.75 25.00 1.50 20.83 - -

(7/32"x1/8")
2.00 13.41 35.83 2.15 - 23.89 14.93

3.00 15.09 44.33 2.66 - 29.56 18.47

4.00 16.31 51.67 3.10 - 34.44 21.53

2. 150

7
DSCE

 150SS (single nozzle)

KEY FEATURES

 Exceptional durability proven by years of use

 Sealed bearings

 Even water distribution gives higher yield

 Many energy efficient models operate at lower pressure

 Sprinkler inlet: 20mm (3/4") BSP Male.