Scribd
Upload
93 views1 page

Welding Cost Estimation

This document provides welding guidelines for pipe diameters of 2 inches or less, between 2 and 10 inches, and greater than 10 inches using shielded metal arc welding (SMAW). It specifies the maximum diameter of pipe that can be welded based on schedule and includes correction factors to apply based on the pipe schedule.

Uploaded by

Moustafa Helmy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
93 views1 page

Welding Cost Estimation

This document provides welding guidelines for pipe diameters of 2 inches or less, between 2 and 10 inches, and greater than 10 inches using shielded metal arc welding (SMAW). It specifies the maximum diameter of pipe that can be welded based on schedule and includes correction factors to apply based on the pipe schedule.

Uploaded by

Moustafa Helmy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Assumptions Pipe Sch 40

SMAW
<= 2 Inch 255 Diameteral Inch Pipe Sch Corr. Factor
<= 10 Inch 225 80 1.2
> 10 Inch 210 120 1.4
160 1.6
Pipe Sch Correction Factor

You might also like