Scribd
Upload
157 views1 page

Product Chemical Composition

1) This document is an inspection certificate and test report for an OK Autrod 12.51 0.8mm 5kg welding wire. 2) It provides the chemical composition and mechanical properties test results. 3) The chemical analysis found the wire to be within specification for classifications including EN ISO 14341-A: G 3Si1, EN ISO 14341-A: G 38 3 C1 3Si1, and EN ISO 14341-A: G 42 4 M21 3Si1.

Uploaded by

Mohammed Hamed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
157 views1 page

Product Chemical Composition

1) This document is an inspection certificate and test report for an OK Autrod 12.51 0.8mm 5kg welding wire. 2) It provides the chemical composition and mechanical properties test results. 3) The chemical analysis found the wire to be within specification for classifications including EN ISO 14341-A: G 3Si1, EN ISO 14341-A: G 38 3 C1 3Si1, and EN ISO 14341-A: G 42 4 M21 3Si1.

Uploaded by

Mohammed Hamed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

INSPECTION CERTIFICATE (3.

1) - Chemical analysis
TEST REPORT (2.2) - Mechanical properties

Date: 2017-02-15 Certificate number: EC24630324 rev. 0

Our order: Your order:


Our reference: Your reference:
Customer number: 14830 Your fax number:
Customer order date: Your e-mail:

Invoice address Receiver of certificate Delivery address


SVETSMÄSTAREN SVETSMÄSTAREN
SVETSMÄSTAREN
ÅNGPANNEGATAN
40072 GÖTEBORG

DELIVERY Lot number: PV650049221 Quantity:

PRODUCT CHEMICAL COMPOSITION


Brand: ESAB
Description: OK Autrod 12.51 0.8mm 5kg Actual results: acc to EN 10204 - 3.1
Item number: 1251084600
Wire/strip
CLASSIFICATIONS
Auxiliary:
EN ISO 14341-A: G 3Si1
EN ISO 14341-A: G 38 3 C1 3Si1 C 0.08%
EN ISO 14341-A: G 42 4 M21 3Si1 Si 0.94%
SFA/AWS A5.18: ER70S-6 Mn 1.51%
CAN/CSA-ISO 14341: B-G 49A 3 C1 S6 P 0.010%
JIS Z 3312: YGW 12(C1) S 0.011%
Cr 0.06%
Ni 0.02%
Mo < 0.01%
Cu 0.13%
MECHANICAL PROPERTIES V < 0.01%
Typical data: acc to EN 10204 - 2.2 Al < 0.01%
Ti+Zr 0.01%
Standard: EN
Auxiliary: M21 (EN ISO 14175)
Condition: As Welded

TENSILE
ReL Rm A4-A5
470 MPa 560 MPa 26 %

IMPACT
Temp +20 °C -20 °C -30 °C -40 °C
KV 130 J 130 J 90 J 90 J

COMMENTS

Product supplied under a QA Programme fulfilling the EN ISO 9001 standard.


This certificate is produced electronically and is valid without signature.
Please refer any queries to:
ESAB Sverige AB, Lindholmsallén 9, Box 8004, 402 77 Göteborg, Phone:+46 31-50 95 00

Validation - Chemical Analysis Validation - Others


Josef Moravek Quality Manager Mikael Mimer Product Manager

You might also like