Tipping Trailer

(2 Wheel)

† Operator Manual † Service Manual † Part Catalogue

 CONGRATULATIONS! TO THE PURCHASER
You have invested in one of the best implements of its type in the market today. This manual contains valuable information about your new “FIELDKING” tipping
trailer. It has been carefully prepared to give you helpful suggestions for operating,
The care you give your “FIELDKING” implement will greatly determine your adjusting, servicing and ordering spare parts.
satisfaction with its performance and its service life. A careful study of this manual
will give you a thorough understanding of your new implement before operating.
Keep this manual in a convenient place for quick and easy reference. Study it
If your manual is lost or destroyed, “FIELDKING” will be glad to provide you a new carefully. You have purchased a dependable and sturdy tipping trailer, but only by
copy. Visit to nearest dealership & get a copy. Most of our manuals can also be proper care and operation you can expect to receive the service and long life
downloaded from our website at www.fieldking.com. designed and built into it.
As an authorized “FIELDKING” dealer, we stock genuine “FIELDKING” parts which
are manufactured with the same precision and skill as our original equipment. Our Sometime in the future your tipping trailer may need new parts to replace which are
trained service persons are well informed on methods required to service worn out or broken. If so, go to your dealer and provide him equipment’s detail like
“FIELDKING” equipments and are ready to help you. model and part number.

Should you require additional information or assistance, please contact us.

CUSTOMER INFORMATION
YOUR AUTHORIZED
Name _______________________________________________
FIELDKING DEALER
Purchased From ______________________________________

BECAUSE “FIELDKING” MAINTAINS AN ONGOING PROGRAMME Date of Purchase _______________________________________

OF PRODUCT IMPROVEMENT, WE RESERVE THE RIGHT TO MAKE
IMPROVEMENTS IN DESIGN OR CHANGES IN SPECIFICATION Model No. ____________________________________________
WITHOUT INCURRING ANY OBLIGATION TO INSTALL THEM ON
UNITS PREVIOUSLY SOLD. BECAUSE OF THE POSSIBILITY THAT Serial No. ____________________________________________
SOME PHOTOGRAPHS IN THIS MANUAL WERE TAKEN OF
PROTOTYPE MODELS, PRODUCTION MODELS MAY VARY IN
SOME DETAIL. IN ADDITION, SOME PHOTOGRAPHS MAY SHOW
SHIELDS REMOVED FOR THE PURPOSE OF CLARITY. NEVER
OPERATE THIS IMPLEMENT WITHOUT ALL SHIELDS IN PLACE.
 PURCHASER / OPERATOR’S RESPONSIBILITY INDEX
1. Read and understand the information contained in this manual. 1. TECHNICAL DATA

2. Operate, lubricate, assemble and maintain the equipment in accordance with all 1.1 Introduction
instructions and safety procedures in this manual. 1.2 Warranty
1.3 When the warranty becomes void
3. Inspect the equipment and replace or repair any parts that are damaged or worn 1.4 Warning
out which under continued operation would cause damage, wear to other parts,
or cause a safety hazard. 2. USAGE INSTRUCTIONS

4. Return the equipment or parts to the authorized “FIELDKING” dealer from where 2.1 Before use
it was purchased for service or replacement of defective parts that are covered by 2.2 Hitching up the trailer
warranty. (The “FIELDKING” Factory may inspect equipment or parts before 2.3 Unhitching the trailer
warranty claims are honored.) 2.4 Loading & tipping the trailer
2.5 Towing the trailer
5. All costs incurred by the dealer for traveling to or transporting the equipment for 2.6 Safety
warranty inspection and claims will be borne by the customer.
3. MAINTENANCE

3.1 Maintenance Instructions

3.2 Storage of machine after work
3.3 Lubrication

4. INSTRUCTION FOR DRIVER

5. FIELDKING – 3 WAY TRAILER

5.1 Introduction
5.2 Maintenance
5.3 Annual Inspection:

6. TROUBLE- SHOOTING CHART

7. SPARE PARTS LIST

 1. TECHNICAL DATA
CAUTIONS 1.1 INTRODUCTION

Thank you for purchasing this “FIELDKING” product. It has been designed to
give you many years of use. This handbook contains the use and maintenance
NOT TO DO instructions with a list of the spare parts of the trailer. Regular and satisfactory
operation together with economic and long lasting use of the implement
depends on the compliance with instructions given in this handbook.

Compliance with the instructions in this handbook is also important since

manufacturer declines all and every responsibility for damage to persons or
property caused by negligence and failure to comply with these instructions.

1.2 WARRANTY
NEVER DRIVE WITH DO NOT OVERLOAD When the machine is delivered, check that it has not been subjected to damage
TRAILER BODY RAISED during transport and that the accessories are in a perfect condition and complete.

Any claims following the receipt of damaged goods shall be presented in writing
within 8 days from the receipt of the goods.

The purchaser may only make the claims under warranty when he has complied
with the warranty conditions in the supply contract.

1.3 WHEN THE WARRANTY BECOMES VOID

NEVER REACH UNDER BEWARE OF Besides the cases specified in the supply agreement, the warranty shall in any case
UNPROPPED TRAILER BODY OVERHEAD CABLES become void.

1. When the implement has been used beyond the specified power limit like
(Tractor Horse Power)

2. When repairs made by the customer without authorization from the

TO DO manufacturer or owing to installation of spurious spare parts, the machine is
subjected to variations and the damage can be ascribed to these variations.

3. When the user has failed to comply with the instructions in this handbook.

4. No warranty will be given if the service is not done on time.

1.4 WARNING

1. Thoroughly read the instruction manual before proceeding with the various
operations.
ENSURE GROUND IS FIRM & READ OPERATOR’
2. Maintain the trailer as per the instructions of this handbook.
MANUAL LEVEL BEFORE TIPPING BEFORE USE
The trailer is a road worthy equipment which if not used correctly could
endanger the operator or bystanders.

1
2. USAGE INSTRUCTIONS 2. Select a firm level place with no overhead power lines or obstructions & ensure
there are no bystanders. All unauthorized persons must keep clear of raised
The “FIELDKING” tipping trailer has been designed to operate in tandem with loads.
tractors capable of safely towing a gross wt. of 3/5/9 ton ( As specified on your
trailer) fitted with draw-bar & having a hydraulic supply of at least 138 bar (2000 psi ) 3. Never reach under a raised trailer body.
via a trailer tipping pipe with quick connect fittings. 4. Never drive with the trailer body raised or attempt to facilitate discharge of load
This equipment is designed for transporting & loading materials. Use in any other by jerking tractor.
way is contrary to the intended use. 5. If tractor fails to tip check that all hydraulic couplings are properly connected &
The manufacturer accepts no liability for damage or injury resulting from misuse. that the tractor has sufficient oil in it. If it still fails to tip the trailer may be
Compliance with the instructions in this manual is essential for safe operations. overloaded in which case you will need to manually remove some of the load.
2.1 BEFORE USE 2.5 TOWING THE TRAILER
1. Check tyre condition & pressure and ensure that all wheel nuts are tight. 1. Fit front weights to the tractor if needed to maintain good steering control.
2. Check there are no visible hydraulic leaks & that hydraulic hoses are in good 2. Do not exceed 30 km/h & reduce speed on slopes & rough grounds.
condition. 3. Always engage low gears when going down hills.
3. Check that there is no other damage to the trailer that could cause a safety risk.
4. Always keep tractor in gear & do not coast.
4. Lubricate trailer as in the maintenance section.
5. Always lock tractor’s independent brakes together before traveling on roads.
2.2 HITCHING UP THE TRAILER
6. If someone is guiding you while reversing make sure they are always within
1. Ensure that there are no bystanders in the immediate area. your sight to avoid them being trapped.
2. Reverse tractor slowly & squarely up to the trailer so that the trailer drawbar eye 2.6 SAFETY
fits between clevis of the tractor drawbar.
You are responsible for the safety of both yourself & those around you when
3. Adjust the trailer drawbar height with the jack if necessary.
using the trailer. Failure to use could result in someone being killed – please
4. Secure the trailer with a proper drawbar pin of the correct size for your tractor’s observe the safety precautions & ensure that this doesn’t happen.
drawbar & retain with a lynch pin.
1. Do ensure that every single operator who will use this machine is fully
5. Check that that the tractor link arms are fully raised & will not foul the drawbar at trained in the safe use of it.
any angle. If in doubt remove them.
2. Do ensure that both tractor & trailer are parked on firm level ground &
6. Check that both halves of the connector are free from dirt then connect the
hydraulic hose to the tipping pipe connector on the tractor
breaks are applied before tipping.

2.3 UNHITCHING THE TRAILER 3. Do ensure that there are no persons in the immediate area of use other than
the operator.
1. Select a suitable place on firm level ground.
4. Do not drive with the trailer body raised, or attempt to facilitate discharge of
2. Check that trailer body is fully lowered on to chassis.
load by jerking tractor.
3. Lock on hand brakes & choke trailer wheels.
5. Do not reach under the raised trailer body for any reason unless it has been
4. Unhitch drawbar. safely choked first.
5. Position hydraulic hoses above the ground, away from dirt.
6. Do not allow passengers on tractor or trailer
2.4 LOADING & TIPPING THE TRAILER
7. Do not climb on trailer when raised.
1. Ensure load is evenly spread & is not heaped above the top of the sides.
Maximum payload is 3,5 or 9 ton (As specified on your trailer) provided the 8. Do not overload. Maximum payload is 3/5/9 Ton (As specified on your
towing tractor has a safe towing capability. trailer) provided the towing tractor has a safe towing capability.
9. Do not use trailer unless you have first checked that it is in safe working
order.

2 3
 10. Do ensure that the trailer is parked on level ground with engine stopped & hand- FIELDKING – THREE WAY TIPPING TRAILER
break applied before dismounting from tractor.
11. Do not unhitch the trailer when loaded.
5. General
12. Do ensure that all pressure is released from hydraulic system & trailer body is
5.1 INTRODUCTION
resting on chassis before transporting, parking or maintaining trailer.
The 3 side tipper mechanism does a great job by unloading the goods in three
13. Do not modify this trailer in any way as this may impair its safety.
directions as now a days trailer unloads only in one direction which requires more
14. Do not make any improvisation repairs to the trailer or hydraulic system. space, time and fuel, so to overcome these problems we have three way tipper
15. The hydraulic operates at very high pressure. Do always wear hand & eye mechanism which is economical and efficient.
protection and use a piece of cardboard to identify where a hydraulic leak is
coming from. If high pressure fluid pierces your skin obtain hospital treatment.
16. Do not attempt to repair tyres unless you are fully competent. Do not exceed
maximum pressure marked on tyres. Compressed air in tyres can cause fatal
explosions if proper procedures are not followed.
3. MAINTENANCE
3.1 MAINTENANCE INSTRUCTIONS
All maintenance should be carried out on firm level ground with tractor switched
off, hand-brakes applied & trailer body fully lowered. Never look under a raised
trailer body unless necessary & the body is securely held up.
Daily Checks:
1. Check tyres pressure.
2. There should be no leakage of hydraulic oil.
Monthly Checks : It is possible to tip in rear as well as sideways. The FIELDKING 3 WAY TIPPING
1. Check wheel nuts are tight. TRAILER is therefore provided with hinges at every corner point. Locking pins have
2. Lubricate all jack & all pivot points. been provided for these hinges. Decide the location of the pins according to the side
on which tipping will take place. There are three possibilities:
3. Inspect all hydraulic hoses & chassis for any damage or signs of cracking.
3.2 STORAGE OF MACHINE AFTER WORK
1. Wash the trailer after use.
2. Replace the worn out nuts & bolts.
Top view
3. If trailer has to remain unused for long time then clean it & apply a layer of used oil
and cover it for rust prevention.
3.3 LUBRICATION
Check the grease in your hubs once a year. In most instances, if a good lubricant is
used and the lubricants levels are maintained, it may not be necessary. However,
should the grease appear to be contaminated or broken down, remove all the old
grease from the bearings and hubs and completely re pack.
“These steps will enhance the life of your trailer.”
4. INSTRUCTIONS FOR OPERATOR
1. When trailer is ready for use don’t stand between trailer & the tractor. Front view
2. Properly fit the drawbar & lock with lynch pin.
3. Never turn the tractor to the right or left when the trailer is raised.
4. Before you start working, please check all nuts & bolts of the trailer.
Tipping right Tipping left Tipping rear
5. Be vigilant about the trees, poles and cables.

4 5
 You must take into consideration that if the machine is used against traffic rules and safety instructions, or if the machine is overloaded
ATTENTION: Placing the pins "diagonally" (for example, left-front and

Remove the pressure from First close the possible ball

right-rear), tipping over a single pin will cause damage.

Standard quick couplings

great-Speed. Choke the

The pin must be placed in the hole of the recess (part of the hinge on the lifting

other, even though the

use over time from the

compatible with each

Platform lowers at too

attach to each other
platform) and under the ball (part of the hinge on the bottom frame). To insert it fully,

and not serviced, there is always a danger of unusual wear or breakdown that may harm both people and the environment.
are not necessarily
Air is removed with
See hub adjusting
turn it a quarter turn.

couplings would
hydraulic system
NOTE

The normal wearing of the tipper trailer takes place safely and does not cause dangerous situations.
oil return flow
instructions
If tipping function is used, the following general aspects should be checked before
tipping (specific actions for the tipper for each version have been given below):

faucets
• The trailer should be correctly coupled to the towing vehicle (which is on hand brake

6. TROUBLE -SHOOTING CHART

or in gear)
• The wheels of the trailer are placed on a stable base surface,

Change the quick coupling

Check the condition of the

Change the bearing when

hoses. Change the quick

necessary. Lubricate the
• The locking pins are correctly placed in the hinges

hub Adjust the tightness

Check that there are no

leaks in the hydraulics
• No persons should be present near the vehicle,

No actions needed
• When you are on the open road: ATTENTION: Ensure that you are visible during the

ACTION

to a suitable one
tipping operation on public roads. This is for your safety and that of other road users.

of hub the hub

During rear tipping, for example, the oncoming traffic from the rear cannot see the

the system
lighting and the reflectors during the unloading.

coupling
5.2 Maintenance
• Weekly inspection:
• Check the hinges (ball and recess) for dirt and clean the same if necessary.

tipper hose is not compatible

Hydraulic system pressure
• The hinge should be sufficiently greased. If necessary, apply grease.

Air in the tipping cylinders

working Quick coupling is

with the tractor connector

There is little hydraulic oil

The quick coupling of the

Hose breakdown valve is

the hub is too loose/tight
little grease in the hub,
• Check that the hydraulic hose is undamaged. It should be totally intact.
Attention:

leaks in the system

CAUSE

Bearing damaged,
If maintenance has to be done with the tipping platform in the raised condition, use
the existing support. This may be placed after fully pumping out the cylinder.
Thereafter, place the support under the tray and ventilate the cylinder. It should then

damaged
first be checked whether the hook on the top frame is correctly placed in the recess of
the support.

5.3 Annual inspection:

The hydraulic hoses

from the connectors

The platform lowers

The tipper does not

• The tipper should be inspected at least once a year by duly trained personnel in

do not come loose

The tipper rises a

The platform will

authorised workshops or service centres.

FAULT

Hub heats up

little or badly
with jerks
ATTENTION:

not lower
During sideways tipping, the top frame should not be tilted more than 45˚ sideways.

rise
There is danger of damage if you raise it beyond this position!

6 7
TECHNICAL DATA AND SPECIFICATION
TRAILER-5TON TRAILER-9TON TRAILER-5TON TRAILER-9TON
Sr No. DESCRIPTION
Part No Qty
1 AXLE ASSEMBLY WITH TYRE 71430009 71430008 1
2 CYLINDER SUPPORT 10450021 10450026 2
3 UPPER CHASSI ASSEMBLY -3W 75240096 71470010 1
4 PIN 25X130MM 10020036 4
5 AXLE CLAMP 175X175X16MM(T) 72510003 2
6 CRADLE 10450020 10450025 1
7 NIPPLE 10450019 1
8 VALVE WIRE 1
9 RING HITCH (DAI 50X16INCH) 10430003 10430004 1
10 CYLINDER MOUNTING SMALL PLATE 72610005 1
11 TAIL LIGHT ASSEMBLY (WITH BULB) 11070001 2
E SERIES 3-WAY 12 LIGHT COVER 71350052 2
13 FRONT WINDOW ASSEMBLY(E SERIES) 71410013 1
TIPPING TRAILER 14 SIDE WINDOW ASSEMBLY 72540011 72690004 2
15 REAR DOOR PILLAR ASSEMBLY (LEFT) 72610006 2
16 REAR DOOR ASSEMBLY(E SERIES) 72570003 1
17 3 WAY CYLINDER 10450018 10450024 1
18 VALVE 10450022 1
19 VALVE SPRING 1
20 DOWN CHASSI ASSEMBLY(3W) 71350036 71440009 1
21 LINK ROD-32X480 71350029 1
22 RUBBER PIPE 10200026 10200053 1
23 HEX HEAD BOLT 16X140X2MM(8.8 GRADE) 10260388 8
24 SPRING WASHER 16MM 10270005 8
25 NYLOCK NUT M16X2MM 10280005 18
26 HEX HEAD BOLT M8X40X1.25MM(8.8GRADE) 10260373 2
27 NYLOCK NUT M8X1.25MM 10280027 2
28 SPRING WASHER 8MM 10270001 2
29 LINCH PIN 10MM 10020022 4
30 HEX HEAD BOLT 16X50X2MM (8.8 GRADE) 10260358 4
31 HEX HEAD BOLT M14X60X2MM (8.8 GRADE) 10260399 4
32 SPRING WASHER 14MM 10270004 4
33 NYLOCK NUT M14X2 (P) 10280090 4
34 RUBBER PIPE .5 METER 10200020 1
35 LEFT LEVER DIA16X50X190MM (T) 10300113 4
36 RIGHT LEVER 16X50X190MM (T) 10300111 6

8 9
 2 WHEEL TIPPING TRAILER (E-SERIES)
S.NO. PART NAME 5-TON 9-TON QTY.
1 RING HITCH 10430003 10430004 1
2 RING HITCH NUT 10280048 10280048 1
3 FRONT LINK ASSEMBLY 71350017 71440006 1
4 HEX HEAD BOLT M16X50 10260358 10260358 2
5 HEX HEAD BOLT M16X65 10260379 10260379 6
6 LYNCH PIN 10MM 10020022 10020022 12
7 DOWN CHASSY ASSEMBLY-150X75 71350007 71440005 1
8 PIN 37X205 10020029 10020029 1
9 HYDRAULIC CYLINDER 10450002 10450003 1
10 PIN 32X156 10020063 10020063 1
11 PIN 35X150 10020030 10020030 2
12 AXLE ASSEMBLY WITH TYRE 71430007 71430008 1
13 LINK ROAD 71350029 71350029 1
14 PARKING JACK 75890001 75890001 1
25

15 SIDE WINDOW ASSEMBLY LEFT 72540011 72690004 1

16 FRONT WINDOW ASSEMBLY 71410013 71410013 1
17 UPPER CHASSY ASSEMBLY 71380006 71470006 1
18 LATCH LOCK 10300229 10300229 4
19 SIDE WINDOW ASSEMBLY RIGHT 72540005 72690003 1
20 PIN DIA 18X65 72570006 72570006 6
21 REAR DOOR PILLAR ASSEMBLY RIGHT 72620002 72620002 1
22 REAR DOOR PILLAR ASSEMBLY LEFT 72610006 72610006 1
23 SPRING WASHER 16MM 10270005 10270005 16
24 HEXAGONAL NUT M16 10280005 10280005 16
25 REAR DOOR ASSEMBLY 72570003 72570003 16
6. SPARE PART LIST

10 11
 3-TON 2 WHEEL TIPPING TRAILER
S.NO. PARTNAME PARTNUMBER QTY.
1 RING HITCH Ø50X406MM 10430003 1
2 LINKAGE SUB-ASSEMBLY 75420085 1
3 PIN 19X95 MM 10020031 1
4 RING HITCH NUT M50 10280048 1
5 PARKING STAND ASSEMBLY 75420006 1
6 FRONT SIDE STRIP 40X5X430-3T 75420012 2
7 TRINGULAR LINKAGE RIB-3T 75420011 2
8 AXLE ASSEMBLY WITH TYRE-75X75MM AXLE 71430005 1
9 NYLOCK NUT M16X2MM 10280005 8
10 SPRING WASHER 16MM 10270005 8
11 ÀXLE PLATE-3T 75420009 2
12 DOWN CHASSY ASSEMBLY (3T 2W TT) 75420003 1
13 PIN 30X135MM(L) 10020062 2
14 LINCH PIN 8 MM 10020045 2
15 HEX HEAD BOLT M16X140X2MM(5.6 GRADE) 10260074 8
16 PIN 37X205MM 10020029 1
17 HYDRAULIC CYLINDER 10 TON CAPACITY 10450002 1
18 PIN 37X205MM 10020029 1
19 HYDRAULIC HOSE 1/2X18 INCH L 20050253 1
20 RIGHT LEVER Ø16X50X190MM 10300111 2
21 SIDE DOOR ASSEMBLY (3T) 75320001 1
22 REAR WINDOW CLAMP-3T 75400021 2
23 REAR DOOR SUPPORT(R) ASSEMBLY (3T TT) 75400003 2
24 HEX HEAD BOLT M16X65X2(P) 10260017 2
3-TON 2 WHEEL TIPPING TRAILER

25 REAR DOOR ASSEMBLY (3T TT) 75310002 1

26 LEFT LEVER Ø16X50X190MM 10300113 2
27 UPPER CHASSIS ASSEMBLY (3T) 75240006 1
28 HEX HEAD BOLT M16X75X2(P) 10260125 1
29 HEX HEAD BOLT M12X40X1.75MM(10.9 GRADE) 10260008 19
30 SIDE DOOR ASSEMBLY (3T) 75320001 1
31 HEX HEAD BOLT M16X150X2MM 10260139 6
32 FRONT DOOR ASSEMBLY (3T) 75260004 1
33 HEX HEAD BOLT M12X35X1.5MM 10260007 3

12 13
5-TON 2 WHEEL TIPPING TRAILER 5-TON 2 WHEEL TIPPING TRAILER 10'x6'x1.75' 4 DOOR
S. NO. PART NAME PART NUMBER QTY.
1 UPPER CHASSY ASSEMBLY (5T 2W TT) 75420102 1
2 DOWN CHASSY ASSEMBLY (5T) 75420103 1
10'x6'x1.75' 4 DOOR

3 MIDDLE FRAME ASSEMBLY-5TT 75420104 1

4 FRONT LINK ASSEMBLY 75240082 1
5 FRONT WINDOW ASSEMBLY (5T) 75240083 1
6 SIDE WINDOW ASSEMBLY (5T) 75400022 2
7 REAR DOOR ASSEMBLY (5T TT) 75410009 1
8 FRONT DOOR SUPPORT(L) ASSEMBLY (5T) 75310014 1
9 FRONT DOOR SUPPORT(R) ASSEMBLY (5T) 75420110 1
10 REAR DOOR SUPPORT(L) ASSEMBLY (5T TT) 75420111 1
11 REAR DOOR SUPPORT(R) ASSEMBLY (5T TT) 75420112 1
12 AXLE ASSEMBLY WITH TYRE-75X75MM AXLE 71430005 1
13 TYRE ASSEMBLY (TYRE,TUBE WITH FLAP) (12.5/80-15.3) 14PR 10300202 2
14 REAR DOOR LOCK (FLAT-70X12(T)X175) 75420113 2
15 LEFT LEVER Ø16X50X190MM 10300113 2
16 RIGHT LEVER Ø16X50X190MM 10300111 2
17 HYDRAULIC CYLINDER 10 TON CAPACITY 10450002 1
18 AXLE MOUNTING PLATE-175X175X16(T)MM 75420009 2
19 MONKY STAND 75890001 1
20 AGRICULTURAL TRAILER HYDRAULIC FLEXIBLE RUBBER PIPE 0.5 MTR. 10200020 1
21 AGRICULTURAL TRAILER HYDRAULIC IRON PIPE 19 INCH X 25MM (T) 10200023 1
22 RING HITCH Ø50X406MM 10430003 1
23 RING HITCH NUT M50 10280048 1
24 HEX HEAD BOLT M16X140X2MM(5.6 GRADE) 10260074 8
25 SPRING WASHER 16MM 10270005 24
26 NYLOCK NUT M16X2MM 10280005 24
27 HEX HEAD BOLT M12X40X1.75MM(10.9 GRADE) 10260008 23
28 SPRING WASHER 12MM 10270003 23
29 NYLOCK NUT M12X1.75MM (P) 10280025 23
30 HEX HEAD BOLT 16X105X2MM (10.9 GRADE) 10260021 8
31 HEX HEAD BOLT M10X65X1.5(P) 10260054 1
32 NYLOCK NUT M10X1.5(P) 10280002 1
33 HEX HEAD BOLT 16X85X2MM (10.9 GRADE) HALF THREAD 10260309 2
34 HEX HEAD BOLT-M16X75(10.9 GRADE) 10260125 2
35 PIN 32X156MM (L) 10020063 1
36 PIN 37X247MM (L) 10020060 1
37 HEX HEAD BOLT-18X65(L)X2.5(P) 10.9 GRADE 10260024 6
38 SPRING WASHER 18MM 10270006 6
39 NYLOCK NUT M18X2.5MM (P) 10280020 6
40 LINCH PIN-10 MM 10020022 4
41 PIN 35X150 10020030 2
42 TAIL LIGHT ASSEMBLY(WITH BULB) 52120081 2
43 CABLE 1.5MM (3-CORE) 52010014 1

14 15
5-TON 2 WHEEL TIPPING TRAILER 5-TON 2 WHEEL TIPPING TRAILER 10'x6'x1.75', 6 DOORS
S.NO. PART NUMBER PART NAME QTY.
1 UPPER CHASSIS ASSEMBLY (5 TON) 71380001 1
10'x6'x1.75', 6 DOORS
2 DOWN CHASSIS ASSEMBLY (5 TON) 71350001 1
3 AXEL MOUNTING PLATE-175X175X16MM (5 TON) 75420009 2
4 RING HITCH (DIA 50X16 INCH) (5 TON) 10430003 1
5 HEX HEAD BOLT M16X105X2MM (10.9 GRADE) 10260021 8
6 HEX HEAD BOLT M16X65X2MM (10.9 GRADE) 10260313 2
7 HEX HEAD BOLT M16X75X2MM (10.9 GRADE) 10260125 2
8 SPRING WASHER 16MM 10270005 20
9 NYLOCK NUT M16X2MM 10280005 28
10 HEX HEAD BOLT M16X140X2MM (5.6 GRADE) 10260074 8
11 AXEL ASSEMBLY WITH TYRE-75X75MM AXEL 71430004 1
12 PARKING STAND ASSEMBLY 72520001 1
13 PIN 19X125MM (L) 10020031 1
14 REAR DOOR ASSEMBLY (5 TON TIPPING) 72570001 2
15 MIDDLE DOOR SUPPORT ASSEMBLY (5 TON) 72600001 2
16 REAR DOOR SUPPORT (R) ASSEMBLY (5 TON TIPPING) 72620001 1
17 REAR DOOR SUPPORT (L) ASSEMBLY (5 TON TIPPING) 72610001 1
18 MIDDLE DOOR ASSEMBLY (5 TON TIPPING) 72540001 8
19 FRONT DOOR SUPPORT (R) ASSEMBLY (5 TON) 72590001 1
20 HEX HEAD BOLT M12X40X1.75MM(10.9 GRADE) (HALF THREAD) 10260008 77
21 SPRING WASHER 12MM 10270003 77
22 NYLOCK NUT M12X1.75 (P) 10280025 77
23 RIGHT LEVER 16X50X190MM 10300111 4
24 LEFT LEVER 16X50X190MM 10300113 4
25 FRONT DOOR ASSEMBLY (5 TON) 71410012 2
26 HEX HEAD BOLT M10X65X2MM (10.9 GRADE) 10260054 1
27 NYLOCK NUT M10X1.5MM (P) 10280002 1
28 REAR DOOR LOCK 160X75X12MM (T) (5 TON) 72610005 2
29 FRONT DOOR SUPPORT (L) ASSEMBLY (5 TON) 71420007 1
30 HYDRAULIC CYLINDER 10TON CAPACITY 10450002 1
31 PIN 35X136MM (L) 10020062 2
32 LINCH PIN 10MM 10020022 5
33 PIN 37X205MM (L) 10020029 1
34 PIN 32X156MM (L) 10020063 1
35 RING HITCH NUT M50 10280048 1
36 AGRICULTURAL TRAILER HYDRAULIC FLEXIBLE RUBBER PIPE 0.5 MTR. 10200020 1
37 AGRICULTURAL TRAILER HYDRAULIC IRON PIPE 19 INCH X 25MM (T) 10200023 1

16 17
 9-TON 2 WHEEL TIPPING TRAILER 12'x6'x2', 6 DOORS
Sr. No. DESCRIPTION PART NO. QTY.
1 UPPER CHASSIS ASSEMBLY (9 TON) 71470001 1
9-TON 2 WHEEL TIPPING TRAILER

2 DOWN CHASSIS ASSEMBLY (9 TON) 71440001 1

3 FRONT DOOR ASSEMBLY (9 TON) 71500009 1
4 REAR DOOR ASSEMBLY (9 TON TIPPING) 72710001 1
5 FRONT DOOR SUPPORT (R) ASSEMBLY (9 TON) 72730001 1
12'x6'x2', 6 DOORS

6 MIDDLE DOOR SUPPORT ASSEMBLY (9 TON) 72740001 2

7 REAR DOOR SUPPORT (L) ASSEMBLY (9 TON TIPPING) 72750001 1
8 REAR DOOR SUPPORT (R) ASSEMBLY (9 TON TIPPING) 72760001 1
9 MIDDLE DOOR ASSEMBLY (9 TON TIPPING) 72690001 4
10 FRONT DOOR SUPPORT (L) ASSEMBLY (9 TON) 71510008 1
11 HEX HEAD BOLT M16X75X2MM (10.9 GRADE) 10260125 2
12 HEX HEAD BOLT M16X105X2MM (10.9 GRADE) 10260021 8
13 HEX HEAD BOLT M16X95X2MM (10.9 GRADE) 10260126 2
14 HEX HEAD BOLT M16X140X2MM (5.6 GRADE) 10260074 8
15 HEX HEAD BOLT M12X35X1.75MM(10.9 GRADE) (HALF THREAD) 10260028 25
16 SPRING WASHER 12MM 10270003 25
17 NYLOCK NUT M12X1.75 (P) 10280025 25
18 NYLOCK NUT M16X2MM 10280005 28
19 RIGHT LEVER 16X59X197MM (T) 10300112 4
20 LEFT LEVER 16X59X197MM (T) 10300114 4
21 SPRING WASHER 16MM 10270005 20
22 REAR DOOR LOCK 160X75X12MM (T) (9 TON) 72750005 2
23 AXEL MOUNTING PLATE-175X175X16MM (9 TON) 75420009 2
24 RING HITCH (DIA 63X18 INCH) (9 TON) 10430004 1
25 RING HITCH NUT M50 10280048 1
26 PARKING STAND ASSEMBLY 72520001 1
27 PIN 19X95MM (L) 10020031 1
28 LINCH PIN 10MM 10020022 5
29 HEX HEAD BOLT M10X65X2MM (10.9 GRADE) 10260054 1
30 NYLOCK NUT M10X1.5MM (P) 10280002 1
31 PIN 38X255MM (L) 10020060 1
32 PIN 32X156MM (L) 10020063 1
33 PIN 35X150MM (L) 10020030 2
34 HYDRAULIC CYLINDER 15 TON CAPACITY 10450003 1
35 AXEL ASSEMBLY WITH TYRE (9 TON) 71520004 1
36 AGRICULTURAL TRAILER HYDRAULIC FLEXIBLE RUBBER PIPE 0.5 MTR. 10200020 1
37 AGRICULTURAL TRAILER HYDRAULIC IRON PIPE 32 INCH X 25MM (T) 10200019 1

18 19
 DELIVERY CHECKLIST

Dealer Pre-Delivery (Please Tick) Please Complete all Dealer information Below
WARRANTY CARD
1. Dealer Pre-Delivery Checklist Dealer Information Customer Copy
1. The customer or person responsible has Dealer’s Name..............................................................................
been given the operator’s manual. CUSTOMER NAME Mr./ Mrs :
Address........................................................................................
2. The customer undertakes to read the .......................................................................................................
c o m p l e t e o p e r a t o r ’s m a n u a l a n d
understands all aspects of the manual State........................................... Postcode.................................
before operation of the machine. ADDRESS :
Phone.......................................... Fax..........................................
3. All safety, operational and maintenance
Email.............................................................................................
information have been explained and
demonstrated. Service Person..............................................................................
MOBILE NO. :
4. All greasing and oil points, stickers, I confirm that the pre-delivery service was performed on this machine.
guarding and ID plate have been identified Email :
and physically pointed out. Signature.......................................................................................

5. The customer agrees that it is his Date.............................................................................................. NAME OF IMPLEMENT :

responsibility to read and carry out the
Comments.....................................................................................
safety, maintenance and operation as per MODEL NO. :
.......................................................................................................
this operator’s manual. .......................................................................................................
YEAR OF Mfg. :

Customer Delivery (Please Tick) Please Complete all Customer Information Below SERIAL NO. :

REGISTRATION NO. :
2. Customer Delivery Checklist Customer Information
DATE OF PURCHASING :
1. The customer or person responsible has Customer’s Name.........................................................................
been given the operator’s manual.
Address........................................................................................ NAME OF DEALER :
2. The customer undertakes to read the .......................................................................................................
c o m p l e t e o p e r a t o r ’s m a n u a l a n d
State........................................... Postcode.................................
understands all aspects of the manual
before operation of the machine. Phone.......................................... Fax.......................................... Customer`s Signature Dealer`s Signature
3. All safety, operational and maintenance Email.............................................................................................
information have been explained and
demonstrated. Delivery Person.............................................................................

4. All greasing and oil points, stickers, I confirm that all of the delivery checks were explained and performed.
guarding and ID plate have been identified
and physically pointed out.
Signature....................................................................................... 9001:2015
Beri Udyog Pvt. Ltd.
Delivery Date................................................................................
5. The customer agrees that it is his Corporate Office : Plot No. 235-236 & 238-240, Sec-3, HSIIDC,
responsibility to read and carry out the Comments..................................................................................... Karnal- 132001 (Haryana), India +91-184-2221571/ 72/ 73
safety, maintenance and operation as per .......................................................................................................
this operator’s manual. ....................................................................................................... marketing@fieldking.com, exports@fieldking.com, www.fieldking.com

20 21
 WARRANTY CARD
Company Copy

CUSTOMER NAME Mr./ Mrs :

ADDRESS :

MOBILE NO. :

Email :

NAME OF IMPLEMENT :

MODEL NO. :

YEAR OF Mfg. :

SERIAL NO. :

REGISTRATION NO. :

DATE OF PURCHASING :

NAME OF DEALER :

Customer`s Signature Dealer`s Signature

9001:2015
Beri Udyog Pvt. Ltd.
Corporate Office : Plot No. 235-236 & 238-240, Sec-3, HSIIDC,
Karnal- 132001 (Haryana), India +91-184-2221571/ 72/ 73
marketing@fieldking.com, exports@fieldking.com, www.fieldking.com

22 23
 WARRANTY CARD
Dealer Copy

CUSTOMER NAME Mr./ Mrs :

ADDRESS :

MOBILE NO. :

Email :

NAME OF IMPLEMENT :

MODEL NO. :

YEAR OF Mfg. :

SERIAL NO. :

REGISTRATION NO. :

DATE OF PURCHASING :

NAME OF DEALER :

Customer`s Signature Dealer`s Signature

9001:2015
Beri Udyog Pvt. Ltd.
Corporate Office : Plot No. 235-236 & 238-240, Sec-3, HSIIDC,
Karnal- 132001 (Haryana), India +91-184-2221571/ 72/ 73
marketing@fieldking.com, exports@fieldking.com, www.fieldking.com

24 25