0% found this document useful (0 votes)
212 views1 page

Quad-Band Panel Dual Polarization Half-Power Beam Width: 790-862 880-960 1710-2170 2490-2690 X X X X 65° 65° 65° 65°

The document summarizes the specifications of a quad-band panel antenna that operates in the frequency ranges of 790-862 MHz, 880-960 MHz, 1710-2170 MHz, and 2490-2690 MHz. The antenna supports dual polarization across all frequency bands and has a half-power beam width of 65 degrees. Key specifications include average gain between 15.4-18.1 dBi depending on frequency band, electrical tilt adjustment ranges from 0-10 degrees, front-to-back ratios above 25 dB, isolation above 28 dB, intermodulation distortion below -150 dBc, and a maximum power handling of 200-250 watts depending on frequency band.

Uploaded by

Dmi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
212 views1 page

Quad-Band Panel Dual Polarization Half-Power Beam Width: 790-862 880-960 1710-2170 2490-2690 X X X X 65° 65° 65° 65°

The document summarizes the specifications of a quad-band panel antenna that operates in the frequency ranges of 790-862 MHz, 880-960 MHz, 1710-2170 MHz, and 2490-2690 MHz. The antenna supports dual polarization across all frequency bands and has a half-power beam width of 65 degrees. Key specifications include average gain between 15.4-18.1 dBi depending on frequency band, electrical tilt adjustment ranges from 0-10 degrees, front-to-back ratios above 25 dB, isolation above 28 dB, intermodulation distortion below -150 dBc, and a maximum power handling of 200-250 watts depending on frequency band.

Uploaded by

Dmi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Quad-band Panel 790–862 880–960 1710–2170 2490–2690

Dual Polarization X X X X
Half-power Beam Width 65° 65° 65° 65°

XXXXPol Panel 790–862/880–960/1710–2170/2490–2690 65°/65°/65°/65° 16/16/18/18dBi 0°–10°/0°–10°/2°–8°/2°–8°T


s
clamped
Type No. 80010805 in c lu d

790–862 880–960 1710 – 2170 2490 – 2690


Frequency range 790 – 862 MHz 880 – 960 MHz 1710 – 1880 MHz 1850 – 1990 MHz 1920 – 2170 MHz 2490 – 2690 MHz
Polarization +45°, –45° +45°, –45° +45°, –45° +45°, –45° +45°, –45° +45°, –45°
Average gain (dBi) 15.8 ... 15.8 ... 15.4 15.7 ... 15.9 ... 15.3 18.0 ... 18.0 ... 17.6 18.0 ... 18.0 ... 17.5 18.1 ... 18.1 ... 17.4 17.8 ... 17.8 ... 17.6
Tilt 0° ... 5° ... 10° 0° ... 5° ... 10° 2° ... 4° ... 8° 2° ... 4° ... 8° 2° ... 4° ... 8° 2° ... 4° ... 8°
Horizontal Pattern:
Half-power beam width 68° 65° 62° 63° 62° 63°
Front-to-back ratio, copalar
(180°±30°) > 27 dB > 27 dB > 25 dB > 25 dB > 25 dB > 25 dB
Cross polar ratio Typically: Typically: Typically: Typically: Typically: Typically:
Maindirection 0° > 22 dB > 22 dB > 18 dB > 22 dB > 23 dB > 25 dB
Sector ±60° > 10 dB > 10 dB > 10 dB > 10 dB > 10 dB > 10 dB
Vertical Pattern:
Half-power beam width 10.3° 9.8° 4.8° 4.6° 4.4° 3.5°
Electrical tilt, continuously adjust. 0°–10° 0°–10° 2°–8° 2°–8°
Sidelobe suppression for 0° ... 5° ... 10° 0° ... 5° ... 10° 2° ... 4° ... 8° 2° ... 4° ... 8° T 2° ... 4° ... 8° T 2° ... 4° ... 8° T

     18 ... 17 ... 15 dB 18 ... 18 ... 16 dB 18 ... 16 ... 16 dB 18 ... 18 ... 17 dB 18 ... 17 ... 17 dB 18 ... 18 ... 18 dB
VSWR < 1.5 < 1.5 < 1.5 < 1.5
Isolation: Intrasystem > 30 dB > 30 dB > 28 dB > 28 dB
Isolation: Intersystem > 30 dB (790–862 // 880–960 // 1710–2170 // 2490–2690 MHz)
Intermodulation IM3 < –150 dBc (2 x 43 dBm carrier)
Max. power per input 250 W* 250 W* 200 W* 200 W*
Total power 500 W* 500 W* 400 W* 400 W*
Input 8 x 7-16 female (long neck)
Connector position Bottom
Adjustment mechanism 4x, Position bottom continuously adjustable
Wind load (at 150 km/h) Frontal / lateral / rearside: 1020 / 390 / 1050 N
Height/width/depth 1997 / 300 / 152 mm
Category of mounting hardware M (Medium)
Weight 29 kg / 31 kg (clamps incl.)
Scope of supply Panel and 2 units of clamps for 50 – 115 mm diameter
* (at 50 °C ambient temperature)
1800/2000/2600
800/900 –

XXXXPol

1710 –2170 880 – 960 880 – 960 1710 – 2170


–45° –45° +45° +45°

790– 862 790 – 862 2490 – 2690 2490 – 2690


–45° +45° –45° +45°

7-16 7-16 7-16 7-16 7-16 7-16


7-16 7-16

148 For more information about additional mounting accessories please refer to page 205

You might also like