Characteristics Zelio Relay plug-in relays 0

Interface relays

Relay type RSB 2A080pp RSB 1A120pp RSB 1A160pp

Contact characteristics
Number and type of contacts 2 C/O 1 C/O 1 C/O
Contact materials AgNi
Conventional rated For temperature y 40°C A 8 12 16
thermal current (Ith)
Maximum operating rate No-load 72 000
In operating cycles/h Under load 600
Switching voltage Minimum V 5
Maximum V a 400, c 250
Maximum breaking capacity VA 2000 3000 4000
Coil characteristics
Rated voltage (Un) V c 6…110, a 24…240, 50/60 Hz
Average consumption c 0.45 W, a 0.75 VA
Permissible voltage variation 0.8…1.1 Un (50/60 Hz or c) at 20 °C
Drop-out voltage threshold ³ c 0.1 Un, ³ a 0.15 Un
Environment
Conforming to standards Standard version IEC 61810-1
Approvals (pending) Standard version UL, CSA
Ambient air temperature Storage °C - 40…+ 85
around the device Operation °C c - 40…+ 85, a - 40...+ 70
Vibration resistance Conforming to IEC 68-2-6 > 10 gn (10…150 Hz)
Degree of protection IP 40
Shock resistance 10 gn (closing), 5 gn (opening)
Mechanical durability In millions of operating cycles ³ 30
Operating time Between coil a ms About 12
(response time) energisation and making c ms About 9
of the On-delay contact
Between coil de- a ms About 10
energisation and making c ms About 4
of the Off-delay contact
Electrical durability Resistive load 8 A - 250 V : ³ 0.1 12 A - 250 V : ³ 0.1 16 A - 250 V : ³ 0.07
In millions of operating cycles/h Inductive load See curves below
Insulation characteristics
Rated insulation voltage (Ui) Conforming to IEC 947 V 400
Insulation class Conforming to VDE 0110 C 250
Dielectric strength Between coil and contact a V 5000
(rms voltage) Between poles V 2500
Between contacts a V 1000
Electrical durability of contacts Reduction coefficient for inductive load a Maximum switching capacity on a resistive
Resistive load a (depending on power factor cos j) load c
Current c

107
Reduction coefficient (A)

1 50
Durability (Number of operating cycles)

0,8
16 B
A 0,6 12 C
106 0,5 8
5 A
C
2
B 0,4
1
105 A
0,5

104 0,3 0,1

0 0,4 0,8 1 1,2 1,6 2 10,8 0,6 0,4 0,2 10 20 30 50 100 200 300
cos ϕ Voltage c
Switching capacity (kVA)

A RSB 2A080pp B RSB 1A160pp C RSB 1A120pp Durability (inductive load) = durability (resistive load) x reduction coefficient.
Socket type RSZ E1S48M RSB E1S35M
Socket characteristics
Conventional rated thermal current (Ith) A 12
Insulation class C 250
Degree of protection IP 20
Approvals CSA, UR
Connection Solid cable without cable end 2 x 2.5 mm2
Flexible cable with or w/o cable end 2 x 1.5 mm2
Arrangement of coil/contact terminals Separate
Type of protection module RZM type E
Relay types used RSB 2A080 and RSB 1A160 (contacts to RSB 1A120
be wired in parallel)

References : Dimensions : Schemes :

page 28041/3 page 28046/2 page 28047/2

28041-EN_Ver2.0.fm/2 Schneider Electric

 References Zelio Relay plug-in relays 0

Interface relays

References
Relays for standard applications
560582

Number of Conventional rated Sold in Unit reference, Weight

C/O contacts thermal current lots of to be completed by
adding the control
voltage code (1) (2)
A kg
2 8 10 RSB 2A080pp 0.014
1 12 10 RSB 1A120pp 0.014
16 10 RSB 1A160pp 0.014

Protection modules
Description Type Voltage Sold in Unit reference Weight
lots of
V kg
Diode E c 6…230 10 RZM 040W 0.003
Diode + LED E c 6…24 10 RZM 031RB 0.004
c 24…60 10 RZM 031BN 0.004
RSB 2A080BD + RSZ E1S48M
c 110…230 10 RZM 031FPD 0.004
Varistor + LED E c or a 6…24 10 RZM 021RB 0.005
560583

c or a 24…60 10 RZM 021BN 0.005

c or a 110…230 10 RZM 021FP 0.005
RC circuit E a 24…60 10 RZM 041BN7 0.010
a 110…240 10 RZM 041FU7 0.010

Sockets - 12 A, a 300 V
Application Sold in Unit reference Weight
lots of kg
RSB 2A080 and RSB 1A160 10 RSZ E1S48M 0.050
RSB 1A120 10 RSZ E1S35M 0.060

Accessories
Application Sold in Unit reference Weight
lots of kg
Maintaining clamp 10 RSZ R215 0.002
RSB 1A120JD + RZM 031FPD + RSZ E1S35M Legend 10 RSZ L300 0.001

(1) Standard control circuit voltages

560584

Volts 6 12 24 48 60 110 120 220 230 240

c RD JD BD ED ND FD – – – –
a 50/60 Hz – – B7 E7 – – F7 M7 P7 U7
For other voltages, please consult your Regional Sales Office.
(2) To order a relay complete with socket: add suffix S to the references selected above.
Example: RSB 2A080pp becomes RSB 2A080ppS
Coil characteristics
Control d.c. supply a.c. supply 50/60 Hz
circuit Average Cod. Operating voltage Average Cod. Operating voltage
voltage resistance limits resistance limits
Uc at 20 ° at 20 °C
Min. Max. Min. Max.
± 10% ± 15 %
V W V V W V V
6 90 RD 4.2 15.3 – – – –
12 360 JD 8.4 30.6 – – – –
RSB 1A160BD + RSZ E1S48M 24 1440 BD 16.8 61.2 400 B7 19.2 26.4
48 5700 ED 33.6 122.4 1550 E7 38.4 32.8
560585

60 7500 ND 42 153 – – – –
110 25 200 FD 77 280 – – – –
120 – – – – 10 200 F7 96 132
220 – – – – 35 500 M7 176 242
230 – – – – 38 500 P7 184 253
240 – – – – 42 500 U7 192 264

RSZ R215

Characteristics : Dimensions : Schemes :

page 28041/2 page 28046/2 page 28047/2

Schneider Electric 28041-EN_Ver2.0.fm/3