FH 13 6x2 Pusher Tractor - Standard or Lite - Rear Air Suspension FH 62T P3A

3510
,34

Cab 2495

Chassis Dimensions [mm]

WB Wheelbase 3800 3900 4000 4100
A Overall Chassis Length 8945 8945 8945 8945
D Center of rear axle to back of cab 2810 2910 3010 3110
N Rear Overhang (Min.) 825 1015 825 1015
N Rear Overhang (Max.) 1015 1015 1015 1015
F Fifth Wheel Position (EC Directive 96/53) 675 675 675 675
T Theoretical Wheelbase 3279 3379 3479 3579

Chassis Weights [kg]

Front Axle 4765 4770 4765 4765
Rear Bogie 2950 2965 2970 2980
Kerb Weight 7715 7735 7735 7745

Turning Diameter [mm]

Turning Circle Diameter Kerb to Kerb 12100 12400 12700 13000
Turning Circle Diameter Wall to Wall 13400 13700 14000 14300

Plated Weights [kg] Plated Design

Gross Vehicle Weight 22800 26500
Gross Combination Weight 44000 44000
Front Axle 7500 7500
Rear Bogie 19000 19000

Important Notes
Chassis Dimensions Chassis weight includes oil, water, AdBlue, 0 litres fuel and without
Cab Height: +305 mm for CAB-HSLP, -285 mm for CAB-LSLP, +450 mm for
driver. Kerb weight can vary ± 3%.
CAB-XHSL.
Front Axle to Back of Cab: +141 mm for CAB-LSLP.
Turning diameters are theoretically calculated. Tag axle used: PA-FIXED.
D-measure includes a front clearance of 50 mm and for rigid trucks also a
subframe of 100 mm. Legal weights can differ from country to country.
Height can vary ± 20 mm for leaf and ± 10 mm for air suspension.
All dimensions are for unladen chassis and any tag axles down. Chassis height For more detailed weight information, including optional equipment weights,
used: CHH-HIGH.
ask your Volvo sales contact to enter your specification into the Volvo Weight
Height change when chassis height CHH-MED,FRAME266: 0 mm.
Information system (WIS).
Weight and dimensions are based upon the following tyres:
Do NOT use this drawing for bodybuilding. Refer to Volvo Bodybuilder
Front Axle Tyres: 315/80R22.5
Instructions and chassis assembly drawing FH62TP3A.
Drive Axle Tyres: 315/80R22.5
Trailing/Pusher Axle Tyres: 315/80R22.5

1 (7)
Ref: FH 62T P3A 01 GBR 2023-03-02 ENG
FH 13 6x2 Pusher Tractor - Standard or Lite - Rear Air Suspension FH 62T P3A
CORE COMPONENTS Refer to sales engineering when used in conjunction with a
PTO
□ CHH-HIGH Chassis Height - High - for loading heights check the unique
□ ATO3112 Gearbox - ATO3112 12-speed I-Shift overdrive automated
BEP chassis drawing attached to this quote
mechanical, suitable for gross train weights up to 60tonne.
□ CHH-LOW Chassis Height - Low - for loading heights check the unique
Refer to sales engineering when used in conjunction with a
BEP chassis drawing attached to this quote
PTO
□ CHH-MED Chassis Height - Medium - for loading heights check the
□ SPO2812 Gearbox - SPO2812 - 12-speed I-shift Dual Clutch automated
unique BEP chassis drawing attached to this quote
mechanical GCW 60tonne
□ CHH-XLOW Chassis Height - Extra-low - for loading heights check the
unique BEP chassis drawing attached to this quote □ ASO-C Crawler gear -
Ratio direct top gearbox 19:1
□ PU-EHYS Pusher axle - Electro-hydraulically steered
Ratio Overdrive gearbox 17:1
■ PU-FIXS Pusher axle - Fixed
□ ASO-ULC Ultra low crawler and crawler gear -
□ RAPD-G4 Rear air suspension, 2 axles - 1 lite pusher / 1 driven Ratios direct top gearbox 32:1 and 19:1
□ RAPD-GR Rear air suspension, 2 axles - 1 pusher/1 driven Ratios Overdrive box 32:1 and 17:1

□ FH-HSLP5 Globetrotter cab - all steel safety cage design with roof □ RSH1370F Drive Axle - RSH1370F 13-tonne hub reduction with differential
mounted emergency escape hatch. lock - design GCW 70 tonne
Designed and built to Swedish impact and ECE R29 ■ RSS1344E Drive Axle - RSS1344E single reduction with differential lock -
regulations design GCW 44 tonne
□ FH-LSLP5 Cab - Low Sleeper - all-steel safety cage design. □ RSS1352A Drive Axle - RSS1352A single reduction 13 tonne with
Built to Swedish impact and ECE R29 regulations differential lock - design GCW 52 tonne
■ FH-SLP5 Cab - Sleeper - all-steel safety cage design with roof-mounted □ RSS1370A Drive Axle - RSS1370A single reduction 13 tonne with
emergency escape hatch. differential lock - design GCW 70 tonne
Designed and built to Swedish impact and ECE R29 □ RSS1370B Drive Axle - RSS1370B single reduction 13 tonne with
regulations differential lock - design GCW 70 tonne
□ FH-XHSL5 Globetrotter XL cab - all steel safety cage design with roof
mounted emergency escape hatch. PACKAGES
Designed and built to Swedish impact and ECE R29 □ FP-D13 Fuel Package
regulations
□ DRIVE5 Cab Package - Drive
□ EU6HT Emission level - Euro VI step E □ DRIVE5+ Cab Package - Drive +
■ EU6SCR Emission level - Euro VI step E □ DRIVE5++ Cab Package - Drive ++
■ D13S420A Engine - New D13K420 12.8 litre developing 420hp at 14- □ 1LIVIN++ Sleep & Resting Package - Living one-bed ++
1800rpm. □ 1LIVING Sleep & Resting Package - Living one-bed
Peak torque 2100Nm at 860 -1400rpm. □ 1LIVING+ Sleep & Resting Package - Living one-bed +
□ D13S460A Engine - New D13K460 12.8 litre developing 460hp at 14- □ 2LIVIN++ Sleep & Resting Package - Living two-bed ++
1800rpm. □ 2LIVING Sleep & Resting Package - Living two-bed
Peak torque 2300Nm at 900-1400rpm. □ 2LIVING+ Sleep & Resting Package - Living two-bed +
□ D13S500A Engine - New D13K500 12.8 litre developing 500hp at 14-
1800rpm. □ INFOBAS Basic media package without secondary display
Peak torque 2500Nm at 1000-1400rpm. □ INFODF Media Information Platform with Dynafleet Support
□ D13S540A Engine - New D13K540 12.8 litre developing 540hp at 14- □ INFOMED Media Information Platform - Medium level
1800rpm. □ INFONAV Media Information Platform with Navigation
Peak torque 2600Nm at 1000-1450rpm. □ INFONDF Media Information Platform with Navigation & Volvo Connect
□ D13T420A Engine - New D13K420TC 12.8 litre Turbo-compound diesel "On board" Support
developing 420hp at 14-1800rpm. □ VISI5+ Visibility+ Package
Peak torque 2400Nm at 900-1250rpm. □ VISI5++ Visibility++ Package
□ D13T460A Engine - New D13K460TC 12.8 litre Turbo-compound diesel □ VISIC5 Visibility Package
developing 460hp at 14-1800rpm. □ VISIC5+ Visibility+ Package
Peak torque 2600Nm at 900-1250rpm.
□ D13T500A Engine - New D13K500TC 12.8 litre Turbo-compound diesel □ GSR2024 GSR2 Safety Package - includes moving off information, cyclist
developing 500hp at 14-1800rpm. and pedestrian side sensors, reverse camera, driver alert
Peak torque 2800Nm at 900-1250rpm. support, tyre pressure monitoring, intelligent speed assist,
alcohol lock preparation interface, and emergency brake lights
■ D13K420 D13K420 - 420hp engine □ GSR2024+ GSR2 Safety Package - includes moving off information, cyclist
□ D13K460 D13K460 - 460hp engine and pedestrian side sensors, reverse camera, driver alert
□ D13K500 D13K500 - 500hp engine support, tyre pressure monitoring, intelligent speed assist,
□ D13K540 D13K540 - 540hp engine alcohol lock preparation interface, and emergency brake lights.
□ EBR-EPG Engine Brake Type - Exhaust brake controlled by steering Plus Volvo dynamic steering with lane keeping corrective
column switch steering, trailer stretch brake and adaptive cruise control
□ EBR-EPGC Engine Brake Type - Exhaust pressure governor for I shift □ COOLCM22 Energy optimization++ package
gearbox
□ EBR-VEB+ Engine Brake Type - Volvo engine brake + and exhaust CHASSIS
pressure governor, enhanced performance from additional □ FST-AIR Front suspension type - Air
exhaust rocker control. Retardation 375kW ■ FST-PAR Front suspension type - 2 leaf parabolic springs
■ AT2612 Gearbox - AT2612 12-speed "I-Shift" automated mechanical □ FSLS-BAS Front suspension levelling - basic stroke
suitable for gross train weights up to 60 tonne only. □ FSLS-HI Front suspension levelling - high stroke for demount operations
Refer to sales engineering when used in conjunction with a - check with bodybuilder
PTO
□ AT2812 Gearbox - AT2812 12-speed I-Shift automated mechanical ■ FAL7.5 Front axle design capacity - 7.5 tonne
suitable for gross train weights up to 60 tonne. □ FAL8.0 Front axle design capacity - 8.0 tonne - check tyre capacity
Refer to sales engineering when used in conjunction with a □ FAL8.5 Front axle design capacity - 8.5 tonnes
PTO □ FAL9.0 Front axle design capacity - 9.0 tonne - check tyre capacity
□ ATO2612 Gearbox - ATO2612F 12-speed I-Shift overdrive automated
mechanical, suitable for gross train weights up to 100 tonne. □ FSTAB Front anti-roll bar - Normal stiffness

■ Standard Equipment □ Optional Equipment

For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.

For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).

The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.

2 (7)
Ref: FH 62T P3A 01 GBR 2023-03-02 ENG
FH 13 6x2 Pusher Tractor - Standard or Lite - Rear Air Suspension FH 62T P3A
■ FSTAB2 Front anti-roll bar - Medium stiffness □ ADB065 Plastic AdBlue tank - 65 litre under/behind the cab
□ FSTAB3 Front anti-roll bar - High stiffness □ ADB068 Plastic AdBlue tank - 68 litre
□ ADB083 Plastic AdBlue tank - 83 litre
□ RAL16 Rear bogie design capacity - 16 tonne □ ADB090 Plastic AdBlue tank - 90 litre
■ RAL19 Rear bogie design capacity - 19 tonne □ ADB099 Plastic AdBlue tank - 99 litre under/behind the cab
■ RSTAB1 Rear anti-roll bar - Normal stiffness □ ADB112 Plastic AdBlue tank - 112 litre
□ RSTAB3 Rear anti-roll bar - Stiff □ ADTC-BF AdBlue tank cover with satin alloy look decorative cover
■ RALIM115 Rear-axle load limiter -11.5 tonne - speed controlled ■ FCAP-L Diesel and AdBlue filler cap - Locking
□ ASF-DL1 Air suspension with 1 driving level ■ FUFF-AS Fuel filler - Anti-spill device
■ ASF-DL3 Air suspension with 3 driving levels □ FUFF-ATS Fuel filler - Anti-spill & anti-syphon device
□ ACTST-TO Active Steering- Volvo Dynamic Steering - VDS - with extra ■ ESH-REAR Exhaust - Horizontal silencer - rear outlet
electronic pump and torque overlay □ ESH-RIGH Exhaust - Horizontal silencer - right outlet
□ ASFE-BAS Active steering feature - Basic - Volvo Dynamic Steering - VDS □ ESH-VERT Exhaust - Horizontal silencer - vertical outlet
- only □ EXST-SSP Stainless steel exhaust stack - NOT polished
□ ASFE-OG Active steering feature - Volvo Dynamic Steering - VDS - with □ EXST-ST Steel exhaust stack
stability assist - oversteer
□ ASFE-PO Active steering feature - Volvo Dynamic Steering - VDS - with □ WHC-FOL2 Two foldable wheel chocks
personal settings and stability assist
□ ASFE-PS Active steering feature - Volvo Dynamic Steering - VDS - with □ WHCP-F Wheel chock carrier position - In the front part of the vehicle
personal settings □ WHCP-T Wheel chock carrier position - Outer luggage locker

■ PSP-FIX Power steering pump - Fixed displacement □ SUP-BAS Side guards - Check with bodybuilder chassis space
□ PSP-VAR Power steering pump - Variable displacement requirements
□ PSP-VAR2 Power steering pump - Variable displacement with electronic □ CHAIN-S Snow chains
control
□ HOOK-SC Snow chain hooks
■ EBS-MED Brake package - EBS medium including "hill" hold function
■ TOWF-NO1 Front towing device - One detachable - stored in cab
■ RST-AIR Rear suspension type - Air □ TOWF-NO2 Front towing device - Two detachable - stored in cab
■ FRAME266 Chassis frame section external height - 266 mm □ TOWR-ONE Towing hitch attached to rear crossmember
□ FRAME300 Chassis frame section external height - 300 mm
□ TREL15 Trailer electrical connection - Single 15 pin - ADR certified
□ FST6565 Chassis frame thickness - 6.5 mm web and flange □ TREL7 7 pole - 24N trailer electrical suzie
□ FST7070 Chassis frame thickness - 7 mm web and flange ■ TREL7-7 Trailer electrical connection - 2 x 7 pin - 24N and 24S
■ FST8080 Chassis frame thickness - 8 mm web and flange
□ TBC-DUO Trailer brake connections - Duomatic type
□ FIL-EEEB Chassis frame inner liner - From the end of the engine to the □ TBC-EC Trailer brake connections - EC palm coupling connectors
end of the bogie ■ TBC-GBR Trailer brake connections - 'C' and 'CA' type
□ FIL-TXEB Chassis frame inner liner - From gearbox member to the end of
the bogie □ TRBR-HCF Full pressure hand controlled trailer brake
■ TRBR-STA Stationary trailer brake control
■ BBOX-EF Battery box position - End of the frame in rear overhang
□ BBOX-L Battery box position - Left hand side □ TRB-STRE Stretch Brake - Automatic low speed trailer brake activation to
avoid jack-knifing and improve steerability
□ BATS-D Dual energy battery system - 2 living batteries and 2 starter
batteries. ■ RFEND-B Rear mud wings - Three piece EC approved and spray flaps
■ BATS-S Single energy battery system (2 batteries)
■ RFH-BAS Basic rear wing height
□ 2BAT210B Battery Capacity - 2 x 210 Ah - Gel type □ RFH-HIG High rear wing height - higher wing tops
■ 2BAT210C Battery Capacity - 2 x 210 Ah - AGM Absorbent Glass-fibre □ RFH-LOW Lower rear wing height - shallower wing tops
Material type
□ ATANK-AL Air tanks - Aluminium
■ BATTAMP Battery management - Voltage and current gauge ■ ATANK-ST Air tanks - Steel
□ BATTIND Battery management - Voltage, current and charge indicators
■ TL-LED Rear lights - LED
□ ADR2 ADR Adaptation - For transportation of dangerous goods on
■ BLIGHT-E Emergency brake light
the road - Note does NOT include safe loading pass package if
required this is quoted separately WHEELS & TYRES
□ MSWI-A Battery master switch - ADR switch circuit shut down □ RT-AL Wheels - Howmet Alcoa brushed aluminium rims - standard
■ MSWI-C Battery master switch - Chassis mounted toggle by the battery holes for long stud fixing
box □ RT-ALDP Wheels - Howmet Alcoa Dura-Bright aluminium rims - standard
□ MSWI-R Battery master switch - Key fob operated remote controlled holes for long stud fixing
□ RT-ALDPD Wheels - Howmet Alcoa Dura-Bright EVO aluminium rims -
■ UR-FUEL Right fuel tank - Without countersunk holes for short stud fixing
Min volume 150l □ RT-ALDU Wheels - Howmet Alcoa brushed aluminium rims - countersunk
Max volume 365l holes for short stud fixing
■ L480A71S Left fuel tank - 480litre aluminium diameter 710mm with ■ RT-STEEL Wheels - Steel rims
catwalk & steps □ WCAP Aerodynamic hub caps
Min volume 160l
Max volume 680l □ JACK-12T 12 tonne bottle jack
□ JACK-15T 15 tonne bottle jack
□ ADTP-BC Adblue tank position - Behind and under the cab on the right- □ JACK-20T 20 tonne bottle jack
hand side
■ ADTP-R Adblue tank position - Chassis mounted on the right-hand side ■ TOOL-BAS Toolkit - Basic
□ TOOLKIT Toolkit - Complete
□ ADB048 Plastic AdBlue tank - 48 litre
■ ADB064 Plastic AdBlue tank - 64 litre □ INFLAHOS Tyre inflation hose

■ Standard Equipment □ Optional Equipment

For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.

For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).

The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.

3 (7)
Ref: FH 62T P3A 01 GBR 2023-03-02 ENG
FH 13 6x2 Pusher Tractor - Standard or Lite - Rear Air Suspension FH 62T P3A
□ HPE-V45 Parker VP1-45, variable displacement, single flow, engine
□ GAUGE-TP Tyre pressure gauge mounted hydraulic pump
□ HPE-V75 Parker VP1-75, variable displacement, single flow, engine
DRIVELINE EQUIPMENT mounted hydraulic pump
□ TRAP-HD Reinforced gearbox application
□ PTR-D Gearbox PTO for plug-in pump, 0.71xeng speed
■ DRM-BE Drive Mode - Balanced & Economy □ PTR-DH Gearbox driven high speed PTO for one plug-in hydraulic
□ DRM-E Drive Mode - Economy pump
■ PVT-MAP I-See Predictive Cruise Control - using map-based topography □ PTR-DM Gearbox driven medium speed PTO for one plug-in hydraulic
information pump
□ PTR-F Gearbox driven PTO with rear flange connection
■ CRUIS-E Cruise control - with I-roll and I-cruise, controls in steering □ PTR-FH Gearbox driven high speed PTO with SAE drive flange
wheel □ PTR-FL Gearbox driven low speed PTO with SAE drive flange
□ CRUIS-E5 Eco torque software - Improved economy mode. Fuel economy □ PTRD-D Gearbox driven HIGH SPEED PTO for two plug-in hydraulic
optimized cruise control for I-Save pumps
□ PTRD-D1 PTRD-D1 Gearbox driven HIGH SPEED PTO (1 SAE flange &
□ AMSO-AUT Enhanced I-shift software with manual shift available in auto 1 plug-in hydraulic pump)
mode and kickdown facility on accelerator pedal □ PTRD-D2 Gearbox driven HIGH SPEED PTO (2 SAE flanges & 1 plug-in
□ AVO-ENH I-Shift application software - Construction and off road hyd pump)
applications □ PTRD-F PTO with 1 DIN + 1 flange connection rear, manual gearbox

□ APF-ENH I-shift enhanced PTO functions □ HPG-F101 Parker F1-101 gearbox mounted, fixed displacement, single
flow, hydraulic pump
□ RET-TH Gearbox mounted retarder □ HPG-F41 Parker F1-41 gearbox mounted, fixed displacement, single
flow, hydraulic pump
□ TC-MAOH2 Extra high performance transmission oil cooler - air to oil with
□ HPG-F51 Parker F1-51 gearbox mounted, fixed displacement, single
front mounted radiator
flow, hydraulic pump
□ TC-MWO Basic transmission oil cooler - water to oil
□ HPG-F61 Parker F1-61 gearbox mounted, fixed displacement, single
□ 2COM1100 Air compressor - Two-cylinder 1100 litres per minute flow, hydraulic pump
■ 2COMP870 Air compressor - Two-cylinder 870 litres per minute □ HPG-F81 Parker F1-81 gearbox mounted, fixed displacement, single
□ 2COMP900 Air compressor - Two-cylinder 900 litres per minute flow, hydraulic pump

□ CLU-AIRC Clutchable air compressor ■ STWPOS-R Steering wheel position - RIGHT-HAND DRIVE

□ AIRIN-FR Front air intake fitted to the underside of cab engine tunnel □ STWM-LE Steering wheel - Leather
■ AIRIN-HI Air intake - Roof-mounted behind cab on the left-hand side
□ STGW-AD2 Steering wheel adjustment - Neck tilt, column height and angle
□ AIRIN-LO Low level air intake behind cab on left hand side
■ STGW-ADJ Steering wheel adjustment - Column height and angle
□ ACL1ST-S Air filter - two-stage element
■ AIRBAG Driver air bag
■ 24A150BL Alternator capacity - 150 amp
□ INST-BAS Basic level instruments
□ 24A180BL Alternator capacity - 180 amp
□ 24AL110B Alternator capacity - 110 amp ■ DRC-AMII DPF Regeneration control switch - for manual and switching off
□ 24AL150B Alternator capacity - 150 amp regeneration
□ CCV-C Closed crankcase engine ventilation □ 1DAYDIG2 Tachograph - Continental VDO 4.0
■ CCV-OX Closed crankcase ventilation for cold markets ■ 1DAYDIG4 Smart tachograph - Continental VDO 4.1 version 2 - legal
demand from 21/08/2023
■ PRIM-EL Electrical priming pump
□ PRIM-MAN Manual priming pump □ ARSL Additional road speed limit - switch in dashboard
□ AF-R Hot fuel recirculation heated fuel filter ■ ESP-BAS1 Electronic Stability Control ESC
■ FUEFE2LW Large engine mounted dual fuel filter with water separator □ ESPC-RO Additional ESC functions - Reduced / Off
□ EST-AID Engine starting aid -Preheating element in the air inlet manifold □ HWSS-AC Forward collision warning with adaptive cruise control
WITHOUT AEBS advanced emergency brake system
□ 220EBH15 220V/1.5Kw electric engine block heater
□ HWSS-ACB Forward collision warning with adaptive cruise control and
□ PTER-100 Engine power-take-off - Rear-mounted with DIN100/ISO7646 AEBS advanced emergency brake system
flange ■ HWSS-FCB Forward collision warning with AEBS advanced emergency
□ PTER-DIN Engine power-take-off - Rear-mounted with DIN5462 (female) brake system
splined shaft for a close-coupled pump
■ LSS-DW Lane departure-warning system
Models with 3 steering axles will use this to drive the steering
pump (AUXPSP) □ LCS Lane change support
□ PTER1400 Engine power-take-off - Rear-mounted with SAE 1410 flange □ LCS4 Side Collision Avoidance Support - passenger and driver side
□ HPE-F101 Parker F1-101,engine mounted, fixed displacement, single □ DAS-W Driver Alert Support system
flow, engine mounted hydraulic pump
□ HPE-F41 Parker F1-41, engine mounted, fixed displacement, single flow, □ RSENS-W Rain sensing windscreen wipers
engine mounted hydraulic pump □ CU-ECC Cab Climate Unit - Electrically controlled air conditioning with
□ HPE-F51 Parker F1-51, engine mounted, fixed displacement, single flow, sun sensor
engine mounted hydraulic pump □ CU-ECC2 Cab Climate Unit - Electrically controlled air conditioning with a
□ HPE-F61 Parker F1-61, engine mounted, fixed displacement, single flow, carbon filter, sun, mist, and air quality sensor
engine mounted hydraulic pump ■ CU-MCC Cab Climate Unit - Manual air conditioning
□ HPE-F81 Parker F1-81, engine mounted, fixed displacement, single flow,
engine mounted hydraulic pump ■ IMMOBIL Thatcham H2 approved immobiliser
□ HPE-T53 Parker F2-53/53, engine mounted, Fixed displacement, Twin
flow engine mounted hydraulic pump □ ALARM-E Vehicle alarm - Cab plus external sensor for body/trailer
□ HPE-T70 Parker F2-70/35, engine mounted, Fixed displacement, Twin □ PHONE-PK Telephone preparation kit (antenna, antenna attachm. cable
flow engine mounted hydraulic pump incl.)

■ Standard Equipment □ Optional Equipment

For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.

For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).

The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.

4 (7)
Ref: FH 62T P3A 01 GBR 2023-03-02 ENG
FH 13 6x2 Pusher Tractor - Standard or Lite - Rear Air Suspension FH 62T P3A
□ ISUNS-BS Side sun visor - Driver & passenger side □ LBK80FRE Lower bunk - Electrically operated recliner with wide middle
■ ISUNS-DS Side sun visor - Driver-side section 815 in the centre x 2000 mm
□ LBK80FRM Lower bunk - Manually operated recliner with wide middle
□ ISUNF-RE Electrically operated textile interior sun blind section 815 in the centre x 2000 mm
■ ISUNF-RM Manually operated textile interior sun blind
□ MATL-FI Lower mattress - Firm pocket sprung
■ CSPL-BX Lower center dash open storage box □ MATL-FI4 Lower mattress - Firm, memory foam, 2000x700x130 mm
□ CSPL-BXD Lower centre dash drawer ■ MATL-SF Lower mattress - Flexi-zone semi-firm, pocket springs up to
□ ADFS Two extra DIN slots in front shelf - can be fitted with card or 100kg - 16 stone
drawer available as an accessory □ OLMAT-BA Mattress overlay protector - 35mm thick
■ BUPALARM Reverse alarm □ OLMAT-PR Mattress overlay protector - Premium 50mm thick

□ RTOLL-PK Road toll PREPARATION kit for trucks operating with "Toll □ TBK60AD Top bunk - Height adjustable foldable 600 x 1900mm
Collect" in Germany □ TBK60F Top bunk - Fixed foldable 600 x 1900mm
□ TBK70AD Top bunk - Height adjustable foldable 700 x 1900mm
□ LOADIND Load indicator with central dashboard display □ TBK70F Top bunk - Fixed foldable 700 x 1900mm
□ REMC-MF Multi-functio wireless remote control □ PH-CAB2 Cab parking heater -1.8kW Air to air
□ PH-ENGCA Cab parking heater - Engine and cab
□ FIREXT3S Fire extinguisher - 3kg mounted on the seat base
□ CPC-ADV I-ParkCool - Advanced cab parking cooler with 120V DC
□ WARNVEST High visibility warning vest - no sleeves
electrical compressor
□ AIDKIT First aid kit - Legal demand for EU markets including delivery
□ SLCP-BAS Sleeper control panel - Basic with switches for interior light,
to EU bodybuilder
night heater, roof hatch and door lock
□ AIDKIT1B First aid kit - Legal demand for trucks transiting Germany
□ SAFE Driver's safe box - for personal items
□ WARNLAMP Portable warning lamp
□ RUS-BAS Rear cab upper storage - 300 mm high
□ LAMP-IN Inspection lamp
□ RUS-HIG Rear cab upper storage - 440 mm high - volume 245 litres
□ BULBKIT Bulb and fuse kit
□ TABLE Bunk table - Folding and height adjustable fitted on lower bunk
■ WRITEPAD Writing pad
□ REFR-RUS Fridge - 28 litre rear upper wall mounted with dividers
■ DST-CF4 Driver seat - Suspended, adjustable shock absorber, travel, □ REFRIG Fridge - 33 litre under-bunk mounted with freezer dividers
backrest & lumbar controls with integrated seatbelt
□ MICRO-PK Microwave equipment - Wiring preparation kit for oven
□ DST-CF5 Driver seat - Suspended with adjustable shock absorber,
travel, backrest, lumbar & heat controls with integrated seatbelt □ BOTH-D Bottle holder - One under dashboard centre section
□ DST-CF6 Driver seat - Suspended with adjustable shock absorber, □ BOTH-DL Bottle holders - Two. One under dashboard centre section and
travel, backrest, lumbar, heat and ventilation controls with one mounted to the under bunk drawer
integrated seatbelt □ BOTH-L Bottle holder - One mounted to the under bunk drawer
□ DST-LUX1 Driver seat - Deluxe 1: electrical adjustment with memory
function, lumbar support, heating & ventilation with integrated □ COFMA-PK Coffee maker - Preparation kit.
seatbelt ■ INLI-BAS Interior light - White LEDs
□ DST-LUX2 Driver seat - Deluxe 2: electrical adjustment with memory □ INLI-NL Interior light - White and red nightlight LEDs without dimmer
function, lumbar support & heating with integrated seatbelt □ INLI-NLD Interior light - White and red nightlight LEDs with dimmer
□ SBD-RED Seat belt colour - Red □ ARL-FLEX Flexible reading lamps - Two "snake" type
□ SBPRE-DS Driver seat belt pretensioner ■ RH-EE Fixed tinted glass sky window with emergency exit
□ PST-BAS1 Passenger seat - Fixed non suspended fold up with seatbelt □ RH-ER Steel roof hatch - Electrically operated, rear opening with
mounted on cab "B" post emergency exit
□ PST-CF4 Passenger seat - Suspended, adjustable shock absorber, □ RH-ETR Tinted glass roof hatch - Electrically operated, rear opening
travel, backrest & lumbar controls with integrated seatbelt with emergency exit
□ PST-CF5 Passenger seat - Suspended with adjustable shock absorber, □ RH-MTR Tinted glass roof hatch - Manually operated, rear opening with
travel, backrest, lumbar & heat controls with integrated seatbelt emergency exit
□ PST-RX1 Passenger seat - Fixed non suspended, features: 90-degree ■ GLAS-TIN Cab windows - Tinted
rotation and tilt function with seatbelt mounted on cab "B" post
□ PST-STD2 Passenger seat - Fixed with backrest adjustment, non □ SWIND-BS Cab side window - On both sides behind 'B' post
suspended with seatbelt mounted on cab "B" post
■ PST-STD4 Passenger seat - Standard suspended with seatbelt mounted ■ VANMIR Vanity mirror - In front shelf
on cab "B" post □ AS-FUS Extra shelf in front compartments
□ SBPRE-PS Passenger seat belt pretensioner □ INFOT-PK TV mounting preparation kit - Above the driver's door, includes
□ ARMRE-BB Armrests - Two on both driver & passenger seats bracket, electrical and speaker connections
□ ARMRE-DB Armrests - Two on the driver seat
□ ARMRE-PB Armrests - Two on the passenger seat
CAB EXTERIOR
□ EXTL-BAS Basic exterior finish - Satin Volvo badges, grey grille, instep,
□ ARU-BAS Armrest upholstery - Vinyl bumper, bumper spoiler, grille, door handles mirror housing
□ ARU-LEA Armrest upholstery - Leather and sunvisor if specified.
□ EXTL-EN2 Enhanced complete painted finish - Satin Volvo badges. Main
■ GRABHI-B Instep cab grab handle - Steel finish
grille, instep, door handles, mirror housing, and bumper in cab
□ GRABHI-L Instep cab grab handle - Leather finish
colour. Aluminium step inserts. Sunvisor and bumper spoiler in
■ FMAT-RUB Footwell floor mats - Rubber cab colour if specified.
□ FMAT-TX2 Footwell floor mats - Two sets, Rubber and textile with an □ EXTL-ENH Enhanced exterior finish - Painted grille in cab colour with grey
embossed pile supplied in the cab instep, bumper, bumper spoiler, grille, door handles mirror
housing and sunvisor if specified, and aluminium step inserts
■ LBK80F Lower bunk - Fixed with wide middle section 815 in the centre
x 2000 mm ■ DGLAS-H Door glass - Hardened
□ DGLAS-L Door glass - Laminated

■ Standard Equipment □ Optional Equipment

For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.

For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).

The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.

5 (7)
Ref: FH 62T P3A 01 GBR 2023-03-02 ENG
FH 13 6x2 Pusher Tractor - Standard or Lite - Rear Air Suspension FH 62T P3A
□ ACCBR-RM Rear & middle roof mounted accessory brackets
■ LOCK-REM Door locks - Remote central locking
□ STUC-B Left and right storage compartments under cab
■ BUMP-B Front bumper - Plastic □ STUC-L Left storage compartment under cab
□ BUMP-B2 Front bumper - Steel □ STUC-R Right storage compartment under cab
□ BUMP-HD Front bumper - Heavy duty - FMX
□ RFCAR-BC Rear mudwing carrier, back of cab
□ BUMP-SP Front bumper spoiler
□ LADDER Ladder back of cab
□ GUARD-EH Sump and radiator guard - to protect engine and hoses
□ REFS-TW White cab conspicuity markings by packed in cab
■ BUGNET Radiator insect screen □ REFS-TY Yellow cab conspicuity markings by packed in cab
□ CTILTP-E Electrically operated hydraulic cab tilt
■ CTILTP-M Manually operated hydraulic cab tilt SUPERSTRUCTURE PREPARATIONS
□ 5WM-ASL Fifth wheel mount - Air operated slider with 4mm L profiles
□ FCABS-A Front cab suspension - Air □ 5WM-ASM Fifth wheel mount - Air operated slider with 50mm L profiles
■ FCABS-M Front cab suspension - Mechanical spring □ 5WM-ISOL Fifth wheel mount - Flush L profiles with 12mm ISO plate -
□ RCABS-A Rear cab suspension - Air 16mm high above chassis frame
■ RCABS-M Rear cab suspension - Mechanical spring ■ 5WM-ISOM Fifth wheel mount - 50mm L profiles with 10mm ISO plate -
60mm high above chassis frame
■ HCC-INEX Lockable front service hatch - Activated by door lock remote □ 5WM-LPRO Fifth wheel mount - Direct to frame with inverted 'L'-profiles
□ 5WM-MASM Fifth wheel mount - Manual slider with 50mm L profiles
□ MIRCFCPS Mirrors - Electrically heated and operated main and wide-angle
with manually adjusted kerb view mirror on the passenger side □ 5WH150 Leg-height - 150 mm
and position camera in nearside mirror arm. □ 5WH160 Leg-height - 160 mm
■ MIRCOMF Electrically heated and operated main and wide angle mirrors □ 5WH175 Leg-height - 175mm
and manually adjusted kerb view mirror on passenger side □ 5WH185 Leg-height - 185 mm
□ 5WH195 Leg-height - 195mm
■ AMIR-F20 Auxiliary front view mirror with a 200mm radius □ 5WH200 Leg-height - 200 mm
□ SUNV-H External smoke grey sunvisor □ 5WH205 Leg-height - 205 mm
□ 5WH210 Leg-height - 210 mm
□ AD-ROOF Cab roof deflector - Adjustable □ 5WH220 Leg-height - 220mm
□ 5WH230 Leg-height - 230 mm
□ AD-SIDEL Cab side deflector - Long extension panels
■ 5WT-FO14 Fifth wheel - Fontaine 150SP2 pressed steel
□ AD-CHASX Chassis side skirts
□ 5WT-FO15 Fifth wheel - Fontaine 3000 lightweight cast air operated slider
□ ADCF-F Additional black edging on chassis side skirt - for moderate duty off-road.
□ 5WT-JO10 Fifth wheel - Jost JSK 36 pressed
■ HL-BASIC Headlights - Halogen □ 5WT-JO8 Fifth wheel - Jost JSK 37 cast
□ HL-CLEAN Head lamp cleaner - washer jets □ 5WT-JO9 Fifth wheel - Jost JSK 42 cast
□ 5WT-SH Fifth wheel - SAF-Holland/+GF+ SK-S 36.20 cast
□ HLP-ST Headlamp protection
■ 5WLM-B Maintenance - Basic fifth wheel - standard top plate
□ HL-ADJ Headlight adjustment - Switch in cab □ 5WLM-L Maintenance - Low maintenance with nylon top plate
□ DRIVL2 Two spot lamps □ 5WL-S1 Fifthwheel lubrication - Locking mechanism and top plate
□ UDRIVL Auxiliary driving lights - Without □ 5WL-S2 Fifthwheel lubrication - Locking mechanism only
■ FOGL-WC Front fog lights □ TCIND Trailer connection indicator - Sensors for height, kingpin and
coupling lock
□ CL-STAT Static corner lights
■ RDECK Catwalk - Single plate and step
□ ASL-RF2 Two Hella H11 70W spotlamps in Globetrotter sign box
□ RDECK-M Catwalk - Extended with two plates and step
□ BEACOA2F Roof beacons - Two front roof mounted amber LED
□ SRWL-PK Chassis-mounted working lamps - Side work and reverse lamp
□ BEACOA2R Roof beacons - Two rear roof mounted amber LED
preparation and 3 position switch - Max load 280W
□ BEACON-P Roof beacons - switch and wiring preparation only
□ SWL-2RW Chassis-mounted working lamps - Two white rear-mounted
□ BEACONA4 Roof beacons - Four amber LED - two front/ two rear
LED lamps
□ CABPT-R1 Single outlet for roof mounted accessories □ SWL-PK Chassis-mounted working lamps - Side work lamp preparation
■ CABPT-R2 Twin outlets for roof mounted accessories. and 2 position switch - Max load 280W

□ SPOTP-F Spotlamp preparation in front, max 280W ■ WL-TA1W Coupling light - LED White
□ SPOTP-R Spotlamp preparation on roof, max 280W
□ WLC-H2W Working lamp back of cab - Two white LED high mounted
□ SPOTP-RF Spotlamp preparation on cab roof and in cab front, max
□ WLC-PKH Preparation kit, cables and switch for high mounted working
2x280W
lamps back of cab
□ ROS-IL2 Preparation kit for illuminated roof sign with switch loose in □ WLC-PKL Preparation kit, cables and switch for low mounted working
cab, fit after registration lamps back of cab
□ WLC-PKLH Preparation kit - cables and switch for low and high mounted
□ CSGN-GTR "Globetrotter" headboard logo working lamps back of cab.
■ HORN-F1S Horn - Air single tone - chassis mounted □ ECBB-HIG Body builder electrical centre with body builder module
□ HORN-R2S Horn - Air - Two roof-mounted ■ ECBB-MED
□ ANT-CBR Roof mounted antenna for CB radio, single aerial. Only □ BBCHAS1 One 7-pole connector for Body builder interface
Globetrotter cabs brings in extra DIN slots. □ BBCHAS3 Three 7-pole connectors for Body builder interface
□ ACCBR-AP Front, middle & rear roof mounted accessory brackets □ BEPR-T2 Body builder electrical software preparation for tipper with
□ ACCBR-F Front roof mounted accessory bracket remote control
□ ACCBR-FM Front & middle roof mounted accessory brackets
□ ACCBR-FR Front & rear roof mounted accessory brackets □ EXSTER External steering control - Volvo dynamic steering and
□ ACCBR-M Middle roof mounted accessory bracket bodybuilder module prepared for external control system,
□ ACCBR-R Rear roof mounted accessory bracket installed and computer by bodybuilder

■ Standard Equipment □ Optional Equipment

For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.

For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).

The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.

6 (7)
Ref: FH 62T P3A 01 GBR 2023-03-02 ENG
FH 13 6x2 Pusher Tractor - Standard or Lite - Rear Air Suspension FH 62T P3A
■ TD-LED Trailer detection with LED sensing
□ AUXL-SPK Electrical preparation kit - wiring and switch for snow plough
lights
□ TAILPRE2 Tail lift preparation kit, wireless remote operation
□ TAILPREP Taillift preparation kit - cab switch and warning in driver display
□ AESW2 Two Body builder bistable electrical switches (marked AUX1 /
AUX2)
□ AESW2PK 2 Body builder bistable el.switches (marked AUX1/AUX2) and
prep. for 4 more switches
□ AUXSW-4 Wiring for 4 extra switches (from Body builder electrical centre
to switch positions)

DELIVERY SERVICES
■ TGW-4GWL Telematics gateway - GSM/GPRS/4G modem, LTE & WLAN
□ FMS-PK Fleet Management System gateway - required for aftermarket
telematics
□ DRUT1 Driver utility app - "My Truck" - 1 year subscription
For mobile phone, tablet, with android and IOS systems.
Only available with Volvo Connect subscription
□ DRUT2 Driver utility app - "My Truck" - 2 year subscription
For mobile phone, tablet, with android and IOS systems.
Only available with Volvo Connect subscription
□ DRUT3 Driver utility app - "My Truck" - 3 year subscription
For mobile phone, tablet, with android and IOS systems.
Only available with Volvo Connect subscription
□ DRUT4 Driver utility app - "My Truck" - 4 year subscription
For mobile phone, tablet, with android and IOS systems.
Only available with Volvo Connect subscription
□ DRUT5 Driver utility app - "My Truck" - 5 year subscription
For mobile phone, tablet, with android and IOS systems.
Only available with Volvo Connect subscription

■ Standard Equipment □ Optional Equipment

For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.

For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).

The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.

7 (7)
Ref: FH 62T P3A 01 GBR 2023-03-02 ENG