Scribd
Upload
235 views3 pages

Ninglu Bnwas Manual

The document provides installation instructions for a bridge alarm system. It lists the included equipment and their recommended installation locations, such as the operating device and connecting module in the bridge area. It also notes the pin connections for the various alarm units and motion detector. Pictures of the installation are requested prior to connecting power. Wiring diagrams are provided on subsequent pages.

Uploaded by

Marios
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
235 views3 pages

Ninglu Bnwas Manual

The document provides installation instructions for a bridge alarm system. It lists the included equipment and their recommended installation locations, such as the operating device and connecting module in the bridge area. It also notes the pin connections for the various alarm units and motion detector. Pictures of the installation are requested prior to connecting power. Wiring diagrams are provided on subsequent pages.

Uploaded by

Marios
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

NINGLU BNWAS BW508 INSTALLATION MANUAL

Follow below installation location of the sensors and modules.

Operating device BW508MAIN


Installation Location: bridge area

Connecting module BW508CONN


Installation Location: bridge area

AC Adapter BW508ADPT
Installation Location: bridge area (next to connecting module)

Reset button BW508R


Installation Location: bridge area

1st Stage Alarm BW508RA1 (2 units are supplied)


Installation Location: bridge wings
2nd Stage Alarm BW508A2 (4 units are supplied)
Installation Location: officer’s cabin area
3rd Stage Alarm BW508A3 ( 2 units are supplied)
Installation Location: officer’s corridor area
Motion detector BW508PIR ( 1 unit is supplied)
Installation Location: bridge area

PRIOR STARTING INSTALLATION MAKE BELOW NOTES.


1) ON PINS 21 AND 22 YOU CAN CONNECT TWO 2ND STAGE ALARM UNITS
2) ON PINS 38 AND 39 YOU CAN CONNECT TWO 2ND STAGE ALARM UNITS
3) ON PINS 23 AND 24 YOU CAN CONNECT TWO 3RD STAGE ALARM UNITS
4) You must connect 24V power supply on motion detector sensor pins 1 and 2

Kindly send us pictures of the installation prior connecting power on the unit.
In the next 2 pages you will find further information of the connections.

Tototheo Trading Ltd - PART OF TOTOTHEO MARITIME


A. 89 Omonoias Avenue, 3048, PO Box 51449, 3505, Limassol, Cyprus
T. +357 25 569 155 | F. +357 25 567 033 | E. info@tototheo.com
www.tototheo.com
Tototheo Trading Ltd - PART OF TOTOTHEO MARITIME
A. 89 Omonoias Avenue, 3048, PO Box 51449, 3505, Limassol, Cyprus
T. +357 25 569 155 | F. +357 25 567 033 | E. info@tototheo.com
www.tototheo.com
After installing equipment follow below diagram to connect all equipment on Connecting
module BW508CONN.

Tototheo Trading Ltd - PART OF TOTOTHEO MARITIME


A. 89 Omonoias Avenue, 3048, PO Box 51449, 3505, Limassol, Cyprus
T. +357 25 569 155 | F. +357 25 567 033 | E. info@tototheo.com
www.tototheo.com

You might also like