Abb Contactores
Abb Contactores
Motor Protection
Accessories
1SBC100122C0201
General Data
Ordering Details
When placing an order give either the Order Code or Type.
In most cases these are completed with other references, e.g. a contactor's coil voltage. This is why the order codes and types figuring in the "Ordering
Details" tables have boxes and to be completed.
Packaging
● Individual standard packaging
Contactors, contactor relays, thermal overload relays and other basic products are supplied in individual packaging. Some small contactors (e.g.
B6 and B7 - Section 6) or accessories are in individual batches of "n" pieces as indicated in the "Packaging" column of the "Ordering Details"
table.
The weight and order code always correspond to a single part.
Other products are supplied as a "set" and are thus marked in the "Packaging" column of the "Ordering Details" table. In this case, the weight and
order code correspond to a set.
● Collective packaging
To limit the amount of wasted packaging, simplify handling and checking of deliveries, we offer the collective packaging solution.
The weight and order code correspond to a single part.
Type Order code Packing Weight Product Type Order code Packing Weight Product
pieces kg features pieces kg features
state coil voltage state coil voltage code
(see table below) (see table below) 1 piece page 1 piece page
a.c. Coils ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○
Dual Voltage Coils a.c. / d.c. Coils with Electronic Coil Interface ○○ ○○ ○○ ○○
d.c. Coils ○○ ○○ ○ ○ ○ ○ ○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○ ○○
The currents given below concern standard, 1500 r.p.m. 50 Hz, three-phase cage motors.
These values are given for guidance and may vary according to the motor manufacturer and depending on the number of poles.
Overview 1
Block Contactors 2
Contactor Relays 3
Mini Contactors 6
Dimensions 9
0/3
1SBC100122C0201
1/0
Overview
1
Contents
Overview
ABB Website
1/1
1SBC100122C0201
Overview
cuit
a.c. Cir a.c. operated 9 ... 110 A A... 2/6
3-pole Contactors
2
Control circuit Ratings Types Pages
(AC-3, 400 V)
a.c. / d.c. operated (electronic coil interface) 50 ... 110 A AF... 2/18
145 ... 750 A AF... 2/20
3-pole Contactors
2
Control circuit Ratings Types Pages
with double-winding coil (AC-3, 400 V)
d.c. operated with standard voltage range 9 ... 110 A AE... 2/22
d.c. operated with large voltage range 50 ... 110 A TAE... 2/22
3-pole Contactors
2
Control circuit Ratings Types Pages
with solid magnetic circuit (AC-3, 400 V)
Protect
cuit
(AC-1, θ < 40°C)
1
a.c. Cir a.c. operated 25 ... 125 A A... 2/26
ng
Switchi
4-pole Contactors
2
Control circuit Ratings Types Pages
(AC-1, θ < 40°C)
4-pole Contactors
2
Control circuit Ratings Types Pages
(AC-1, θ < 40°C)
a.c. / d.c. operated (electronic coil interface) 70 ... 125 A AF... 2/30
4-pole Contactors
2
Control circuit Ratings Types Pages
with double-winding coil (AC-1, θ < 40°C)
d.c. operated with standard voltage range 70 ... 125 A AE... 2/31
d.c. operated with large voltage range 70 ... 125 A TAE... 2/31
4-pole Contactors
2
Control circuit Ratings Types Pages
(AC-1, θ < 40°C)
4-pole Contactors
2
Control circuit Ratings Types Pages
with solid magnetic circuit (AC-1, θ < 40°C)
Standard Contactors
2
Control circuit Main poles Types Pages
Starting
a.c. operated 3-pole A... 2/46
a.c. / d.c. operated (electronic coil interface) 3-pole AF... 2/46
Starting
a.c. operated 3-pole A... 2/50
a.c. / d.c. operated (electronic coil interface) 3-pole AF... 2/50
d.c. operated 3-pole AE... 2/50
Line Contactors
2
3-phase er
Control circuit Main poles Types Pages
Line Contactors
2
g
Lightin
Control circuit Main poles Types Pages
cuit
a.c. Cir a.c. operated 9A
12 A
B6
B7
6/2
6/2
ng
Switchi d.c. operated 9A
12 A
BC 6
BC 7
6/2
6/2
Mini Contactors
6
g
Lightin
Control circuit Main poles Types Pages
Contactor Relays
3
Control circuit Poles Types Pages
with solid magnet circuit
d.c. operated with standard voltage range 4 and 8-pole KC... 3/8
d.c. operated with large voltage range 4 and 8-pole TKC... 3/8
Liability
The devices in this catalogue do not endanger safety when they are installed, mounted and used
according to their application and in compliance with the installation rules and standards which apply
to them.
Quality
ABB has set up a quality assurance organisation in compliance with the requirements of ISO 9001
standard.
ABB factories are ISO 9001 approved.
ABB Low Voltage Control Apparatus meet with a high quality standard. It is developed, manufactured
and tested under the sole responsibility of ABB. Our test platforms benefit from a quality assurance
organisation accredited as per standard ISO/IEC 17025.
In compliance with the regulations set out by the ISO 9000 series standard, ABB sets up and manages
the procedures and files relating to product quality and actions having an effect on quality.
Guarantee
The information contained in this catalogue reflects the current state of our knowledge and aims to
present our products and their possible applications. Thus, the information does not guarantee certain
specific characteristics of products or their aptitude for a specific utilization. All filed legal patents or
industrial property rights must be respected.
Sustainable Development
In 1999, ABB extended its Environment Management Programme to all the principles of the
Corporate Charter for Sustainable Development. All concerned factories are ISO 14001 certified.
Eco-design
Some environmental information is accessible on ABB Website.
☞ www.abb.com/sustainability ☞ select in left menu: "ABB's environmental policy".
Environmental product declarations can be issued upon customer's request.
Packing
Generally speaking, the diversification of reusable packing satisfies ecological
requirements and the specific needs of our customers.
Packing is designed and produced with a continuous concern for respect of the
environment.
For instance, polystyrene packing materials are replaced by recyclable
wrapping materials with an efficient protection of our products during their
transportation.
1/12
Contents
IndustrialIT
IndustrialIT
2
1/13