LED LUMINAIRES

ABOUT COMPANY

HISTORY With almost 300 employees, TREVOS counts itself as one of

Headquartered in the north of Bohemia in the Czech the largest employers in the region.
Republic, Trevos is a market-leading manufacturer of
industrial and interior luminaires, boasting over 30 years of GLOBAL POSITION
experience. Trevos is also a local and global technological Besides its significant share of the domestic market, the
trendsetter when it comes to producing high-quality, company is also very active in export. It successfully exports its
innovative and affordable light fixtures. Currently exporting products into more than 60 countries of the world, e.g. Germany,
to over 60 countries in the world, the company has its own Italy, Belgium, Poland, Netherlands, Estonia, Switzerland and
R&D Department and invests heavily in innovations to satisfy many more.
market demands.
The company acquired its illumination technology market
In 2021, Trevos launched NANOTTICA, a family of cutting- share first of all by the implementation of its own research
edge light fittings that feature a nano-structure. So far, this and development in the production of innovative models of
patent-pending technology has not been used by any other light fittings as well as investments into quality thermoplastic
manufacturer anywhere in the world. materials and electric components. The business strategy of the
company is also based on the production of continually innovated
The total turnover of the company is divided into two basic lines of light fittings inspired by modern trends of illumination
groups: Domestic sales – 40 % and Export sales – 60 %. technology while keeping reasonable prices in comparison with
top world producers.
REGIONAL POSITION
The interest of the market in the Czech Republic in industrial The business has been continually increasing especially with
and indoor light fittings is mostly driven by the demand customers from the European Union, to which Trevos supplies
of assembling companies from the branch of electrical complete products modified in details on the basis of individual
engineering. Deliveries are secured through the network of customer’s requirements.
wiring material and light fitting wholesale customers. The
TREVOS company ranks among leading manufacturers of COMPANY GOAL
industrial and office light fittings at the domestic market. The goal of the company is to offer its clients first-class products
for competitive prices.
LIGHT FITTING DEVELOPMENT CERTIFICATION
All development tasks are subject to and strictly managed by the Company TREVOS, a.s. utilizes an integrated management
ISO 9001 quality process. system (IMS) that consists of a range of processes, rules,
policies, and documents the company needs to deliver high-
The development and implementation of production of new light quality products and provide superior services in an appropriate
fitting type lines is driven particularly by market requirements and timely fashion, ensuring everything is done perfectly the
which are monitored in detail and summarized into marketing first time. The company is managed in accordance with these
studies. processes, rules, policies, and documents.
The projects are well secured as regards human resources.
The members of the technical division have the required
know-how and experience. They apply the results to industrial
practice. Within the projects, they also closely cooperate
with knowledgeable academicians of several technical
universities.

The technical division has an extensive background of premises

with cutting-edge equipment, serving for the implementation of
applied research and experimental development including the
execution of key measurement and tests. ESČ certificate ISO certificate ENEC certificate

Our ISM integrates a variety of the company’s performance

criteria to ensure compliance with the requirements of a number
of management system standards. These include ČSN EN ISO
9001:2016 (QMS) and ČSN EN ISO 14001:2016 (EMS) as well
as ČSN EN ISO 50001:2019 (EnMS) and ČSN ISO 45001:2018
(OHSMS). The ISM uses simplified processes, procedures
and documents while increasing production efficiency and
eliminating the elementary approach. As a result, costs are cut,
system efficiency increases, and less effort is required.

We are holders of the ENEC, CB, ESČ, EAC, ATEX and DLG
certificates. We are authorized to the use the “Czech Quality“
mark for light fittings with ESČ licence. Ex fittings designed for
hazardous areas (zones 1, 21): conformity to type ensured by
internal production management and product testing under the
supervision of a notified body.
PRODUCTION
The production program of the company is segmented into
product lines of light fittings with similar or identical ways of
use. Another criterion consists in type lines distinguishing
the products by the achieved technical parameters and their
capabilities.

The company has a large technological park that ensures

its own production program. All injection machines are
robotized. New innovative technologies include e.g. the
robotized overmoulding of aluminium cores, the fully
automated System Robot connecting workstation or the
Sonderhoff foaming line. ENVIRONMENT
Pursuant to Czech Act No. 541/2020 Sb. (the Waste Act), and Act
No. 542/2020 Sb., on End-of-life Products, Trevos participates in
EKOLAMP, a non-profit initiative seeking to ensure compliance
with applicable electrical appliance collection and recycling
rules. Additionally, Trevos meets the requirements of Directive
No. 2011/65/EU on the restriction of the use of certain hazardous
substances in electrical and electronic equipment (RoHS) as
well as of Regulation No. 1907/2006 concerning the registration,
evaluation, authorisation and restriction of chemicals (REACH).

CZECH LIGHT FITTINGS 1

 CONTENTS

Industrial plastic Industrial plastic Industrial plastic

NANOTTICA 10 INNOVA 72 FUTURA 96

NANOTTICA ES TRS
energy saver, exceptionally low UGR 12 INNOVA 74 FUTURA, ES PC, HE PC 98

NANOTTICA ES
energy saver 16 INNOVA NB
for high ceilings 77 FUTURA VP
for outdoor spaces 109

NANOTTICA TRS
exceptionally low UGR 20 INNOVA WB
for low ceilings 80 FUTURA NB
for high ceilings 113

NANOTTICA
basic version 24 INNOVA ABS
chemically resistant version 83 FUTURA ABS, ES ABS, HE ABS
chemically resistant version 116

NANOTTICA NB
for high ceilings 28 INNOVA NB ABS for high ceilings,
chemically resistant version 86 FUTURA CLASS II
with Class II insulation 126

NANOTTICA WB
for low ceilings 32 INNOVA WB ABS for low ceilings,
chemically resistant version 89 FUTURA MAX
for extreme temperatures 130

NANOTTICA ES ABS energy saver,

chemically resistant version 36 INNOVA TRS
for both direct and indirect illumina 92 FUTURA SNS
with motion detector 133

NANOTTICA ABS
chemically resistant version 40
FROST 138
NANOTTICA NB ABS for high ceilings,
chemically resistant version 44 FROST
for cold stores and freezing facilities 140

NANOTTICA WB ABS for low ceilings,

chemically resistant version 48 FROST PLUS
for cold stores and freezing facilities 143

NANOTTICA VP
for outdoor spaces 52
MIDDLE EAST Ta 55 146
NANOTTICA VP ABS for outdoor
spaces, chemically resistant version 56 MIDDLE EAST Ta 55 148
NEW

NANOTTICA MAX
for extreme temperatures 60

NANOTTICA CLASS II
with Class II insulation 63

NANOTTICA SNS
with motion detector 67

2
 CONTENTS

Industrial plastic Industrial metal Indoor surface-mounted plastic

PRIMA LED 152 TrEx 190 LINEA 234

PRIMA LED 154 TrEx
for explosion-hazard environment 192 LINEA 236

PRIMA LED VP
for outdoor spaces 157 LINEA SQUARE 238
PERUN SLIM 198
PRIMA LED ABS
chemically resistant version 160 PERUN SLIM 200 LINEA ROUND 240

PRIMA LED CLASS II

with Class II insulation 163
ALUMAX LED 204 LUXOR LED 244
PRIMA LED TRS
for both direct and indirect illumina 166 ALUMAX LED 206 LUXOR LED 246
v
PRIMA LED MAX
for extreme temperatures 169 ALUMAX LED MAX
for extreme temperatures 209
SB LED 250
PRIMA LED SNS
with motion detector 171 SB LED 252
CANOPUS 214
PRIMA LED Ex
for explosion-hazard environment 174 CANOPUS 216
LYRA 254
PRIMA LED TUBE 177 CANOPUS HE
high efficiency 223 LYRA 256

CANOPUS MAX
for extreme temperatures 226
CONCEPT RED 182
CONCEPT RED
with red light module 182

CONCEPT BLUE 184

CONCEPT BLUE
with blue light module 184

HUMAN CENTRIC LIGHTING 186

HUMAN CENTRIC LIGHTING
to boost circadian rhythms 186

CZECH LIGHT FITTINGS 3

 CONTENTS

Indoor surface-mounted plastic Emergency light fittings Additional information

BELTR LED 258 Emergency 290 INFORMATION 314

BELTR LED 260 PRIMA LED NM 292 DALI PROFESSIONAL CONTROL 314

BELTR LED TUBE 263 PRIMA LED Ex NM 295 PROPOSAL OF EMERGENCY

LIGHT FITTINGS
Orientační tabulka rozmístění nouzových svítidel

FUTURA 2.4ft, 2.5ft PRIMA 1.4ft, 1.5ft

320
NEW
2,0 4,2 9,3 8,9 8,6 3,9 4,4 10,0 9,1 8,1 3,6
2,5 4,7 11,5 11,1 10,6 4,3 4,7 12,2 11,0 9,8 4,0
3,0 5,0 12,6 12,1 11,6 4,6 5,0 13,0 11,8 10,6 4,2

297 322
3,5 5,1 13,3 12,8 12,3 4,8 5,1 13,7 12,5 11,3 4,4
4,0 5,3 13,9 13,4 12,9 4,9 5,3 14,3 13,1 11,9 4,6
FUTURA NM CORRIDOR FUNCTION
5,0 5,7 14,8 14,4 13,8 5,2 5,7 15,1 14,0 12,7 5,1
6,0 5,9 15,1 15,0 14,3
100% 5,5 5,9 15,4 14,6 13,3 5,2

NAOS 268 FUTURA 2.2ft PRIMA 1.2ft

2,0 3,4 9,0 8,7 8,4 3,3 3,6 9,4 8,5 7,6 3,1

270 300 324

2,5 3,8 9,8 9,4 9,1 3,5 3,8 10,1 9,2 7,4 3,3

NAOS NANOTTICA NM SOURCE

5%
3,0
3,5
4,0
COLOUR RENDERING
3,9
4,0
4,1
10,4
10,9
11,3
10,0
10,5
10,9
9,7
10,2
10,6
3,7
3,8
4,0
3,9
4,1
4,2
10,7
11,2
11,5
9,8
10,3
10,7
9,0

5%
9,4
9,9
3,5
3,6
3,8
5,0 4,3 11,7 11,5 10,9 4,3 4,3 11,9 11,2 10,3 3,9
6,0 4,0 11,9 11,8 11,2 4,1 4,0 12,0 11,3 10,5 3,7

ALUMAX PERUN

NAOS AS 273 BELTR LED NM 304 CHEMICAL RESISTANCE

2,0
2,5
3,0
3,5
4,0
2,7
3,0
3,3
3,5
3,6
6,6
7,4
8,1
8,7
9,2
7,2
8,0
8,7
9,4
10,0
7,6
8,5
9,3
10,0
10,6
3,2
3,5
3,8
4,0
4,1
3,2
3,5
3,7
3,9
4,0
8,0
8,8
9,5
10,1
10,5
8,2
9,0
9,7
10,3
10,7
325
8,5
9,2
9,9
10,4
10,9
3,4
3,7
3,8
4,0
4,1
5,0 3,9 9,9 10,7 11,4 4,4 4,3 11,2 11,3 11,5 4,4
6,0 3,9 10,1 11,2 11,6 4,4 4,2 11,3 11,6 11,6 4,3

a NAOS MPR NAOS

NAOS SQUARE 275 HELIOS LED 307 LIGHT FITTING

MAINTENANCE FACTOR
2,0
2,5
3,0
3,2
3,4
3,8
7,4
8,7
9,3
7,4
8,6
9,2
7,5
8,5
9,2
3,2
3,5
3,8
3,3
3,7
3,8
8,4
9,2
10,0
8,5
9,3
10,0
326
8,6
9,4
10,0
3,4
3,7
3,8
3,5 4,1 9,9 10,0 10,0 4,1 4,0 10,4 10,5 10,6 4,0
4,0 4,3 10,5 10,6 10,7 4,2 4,1 10,9 10,9 11,0 4,1

Činitel údržby: 0.80

Minimální osvětlenost na ose: 1 lx Šířka únikové cesty: 2.0 m

277 310
Min. osvětlenost na poloviční šíři únikové cesty: 0.5 lx Rovnoměrnost na ose max. 40 : 1

NAOS MPR PLEXI LED

NAOS SQUARE MPR 280

MO SLIM 284
MO SLIM 286
NEW

4
 USED MARKS AND SYMBOLS

(Ingress Protection) code for protection 220-240 V Conformity mark documenting conformity
Nominal input voltage 220-240V, 50/60 Hz verification of product with all EU harmo-
level against dust, solid items and water.
nising provisions
Licence mark indicating product conformity
Test of protection against hot water DALI Electric equipment: with European standards for electric safety
high-pressure jets. with digital dimmable driver DALI of product
up to The mark is registered at the CENELEC as a
Nominal maximum temperature of 1 phase through-wiring connection Czech mark expressing the permanent conform-
45ºC environment ity of a product with electrical safety standards
Internationally acknowledged certificate.
Fire and ignition resistance at test by hot 3 phase through-wiring connection Product certification according to IEC
loop heated to 850 °C standards
Code for protection level against external Electric equipment: for emergency illumi-
impact nation with own independent source Electromagnetic compatibility
Anti-vandalism version
Certificate of the United Customs Union
Electrical equipment: a microwave motion
LED LED light fitting sensor (Russia, Belarus, Kazakhstan, Armenia,
Kyrgyzstan)
Light fitting with 5-year warranty. It CRI The colour rendering index determines
does not cover light fittings fitted with the colour sensation accuracy at other than Light fitting intended for environments with
emergency module (2 years) and batteries
>80
daily lighting danger of explosion
(6 months).
The chromaticity temperature determines Declaration of conformity with legal norms
the colour spectrum of the light (it is given HACCP for food industry
Light fitting external surface warming in Kelvin - K)
The light fitting complies with the relevant
During the stated operation life and under ob- requirements of the German Agricultural
Class 1 light fitting - basic insulation, plus servance of the specified operating conditions,
terminal for guard wire L 90 Society (DLG) and may be installed in
no more than 10 % (B10) chips could experi- agricultural buildings.
B 10 ence defaults and the total luminous flux of
the light fitting will not drop under 90 % (L90). The luminaire complies with the resistance
Class 2 light fitting requirements as per DIN 18032-3 and DIN
EN 13964 and may be installed in sports
halls.
Light fittings meet photobiological safety
requirements in accordance with the CSN
EN 62471:2009 standard. Suitable for use
in areas with persons sensitive to UV radia-
tion & the blue visible spectrum (daylight).

CZECH LIGHT FITTINGS 5

 LIFESPAN OF LED CHIPS

Reliability and long lifespan are some of the key advantages of LED technology. And while it is true that they do not last forever, unlike light bulbs
and halogen lamps, LED chips never fail abruptly. Instead, they gradually fade over time until they become too dim.

100

90
80
L90 Sudden failure of traditional light bulbs as opposed to a
70
gradual decrease in output of LEDs
Bulb as a source of light

L80

L70

T (h)
1500 50000

WHAT DOES LxBx MEAN?

L90 B10 L80 B10

< 90% < 80%

> 90% > 80%

90 % of sources of light retain more than 90 % of their lumi- 90 % of sources of light retain more than 80 % of their
nous power while the remaining 10 % retain less than 90% of luminous power while the remaining 10 % retain less than
their rated luminous power. 80% of their rated luminous power.

L80 B50 L90 B50

< 80% < 90%

> 80% > 90%

50 % of sources of light retain more than 80 % of their lumi- 50 % of sources of light retain more than 90 % of their
nous power while the remaining 50 % retain less than 80% luminous power while the remaining 50 % retain less than
of their rated luminous power. 90% of their rated luminous power.

The values shown are based on LM-80 and TM-21 standards. TREVOS LED modules’ standard lifespan is indicated by their L90B10 rating. All lifespans exceeding 60.000
hours are calculated without taking into consideration other possible types of failure. The stated lifespans are indicative only and not covered by the warranty.

LED modules lifetime comparison

198.000
200.000 176.000
165.000

150.000
125.000
111.000
104.000
100.000
59.000
50.000 53.000
50.000

0
L90/B10 L90/B20 L90/B50 L80/B10 L80/B20 L80/B50 L70/B10 L70/B20 L70/B50

The given values apply to the ambient temperatures prescribed for each luminaire type and for luminaires with a given luminous power.

6
 Explanation of LED products marking

LIGHT FITTING NAME X.Yft

X
• total number of LED module rows in light
• X = {1, 2, 4, 5, 6, 7}

Y
• total length of LED modules in one row
• Y = {1, 2, 4, 5}

ft
• unit of length
• 1ft = 1 feet (280 mm)

NANOTTICA 1.5ft
•X=1
• Y = 5ft

INNOVA 1.5ft
•X=1
• Y = 5ft

FUTURA 2.4ft
•X=2
• Y = 4ft

PRIMA LED 1.5ft

•X=1
• Y = 5ft

CZECH LIGHT FITTINGS 7

8
TAKE A SNEAK PEEK
The future of commercial Luminaires deserve their
lighting own videos
Every year we come up with something new, be Don’t believe that exciting videos can be made
it a fixture we have just launched or a redesign of about light fittings? Then check out our YouTube
one that we have been offering for a while. In any channel! There’s an installation speed test video
case, we respect the needs of the market and do featuring two differently connected light fittings.
our best to suit each client’s requirements. There’s one that shows you how to build a Trevos
exhibition stand. And there are many more that
Our new NANOTTICA LED light fitting family has introduce our products and manufacturing pro-
been developed with an emphasis on reducing en- cesses as well as test our light fittings.
ergy consumption while keeping the same lumi-
nous power. YouTube
Keeping you posted
Modern design process
on all things Trevos
with BIM objects
Like us on Facebook to keep in touch with what
Not only have we prepared BIM objects for our most we do. Be the first to check out our new and re-
popular luminaires – NANOTTICA, INNOVA, FUTU- designed products, photos of our production floor
RA, LINEA and PRIMA LED. We pioneered the use and from trade fairs, and lots more. Feel free to
of BIM objects by becoming the first in the Czech like, share and comment.
Republic to offer them for this type of luminaires.
Currently, designers and architects are welcome facebook.com/trevos.cz
to download BIM plugins for Archicad or Revit.
bim.lighting Sharing information with
professionals
Are LED fittings worth it? We also share info about our products as well as
news on LinkedIn, though in a more formal way.
Here is one of the most frequently asked ques-
tions: Is investing in TREVOS LEDs and replacing linkedin.com/company/trevos-a-s-
an existing fluorescent lighting system worth it?
Most probably yes! You can calculate replacement
costs as well as your energy savings using our
easy-to-use app. Hashtag TREVOS
trevos.eu/en/calculator Guess what! We have just started using a #hashtag.
It gives our fans access to unusual product photos
and short vids, exciting news about a product we
are about to launch or redesign, and lots more.

#trevoslighting

Want us to keep you posted about all things Tre-

vos? Contact us at marketing@trevos.cz
TREVOS.EU
NANOTTICA

INDUSTRIAL
PLASTIC
DUSTPROOF
WATERPROOF
IMPACT RESISTANT
 PRODUCT OVERVIEW

NANOTTICA – industrial plastic LED light fitting

NANOTTICA ENERGY NANOTTICA FOR LOW

SAVER, EXCEPTIONALLY CEILINGS, CHEMICALLY
LOW UGR RESISTANT VERSION
page 12 page 48
IP66 IP69 NANOTTICA ES TRS IP66 IP69 NANOTTICA WB
PC, PCc ABS, ABSc
page 12 page 48

NANOTTICA ES NANOTTICA FOR

OUTDOOR SHELTERED
ENERGY SAVER
SPACES
page 16 page 52
IP66 IP69 NANOTTICA ES IP66 IP69 NANOTTICA VP
PC, PCc PC, PCc
page 16 page 52

NANOTTICA NANOTTICA FOR OUTDOOR

EXCEPTIONALLY LOW SHELTERED SPACES, CHEMI-
UGR CALLY RESISTANT VERSION
page 20 page 56
IP66 IP69 NANOTTICA ES TRS IP66 IP69 NANOTTICA VP
PC, PCc ABS, ABSc
page 20 page 56

NANOTTICA NANOTTICA
FOR EXTREME
BASIC VERSION
TEMPERATURES
page 24 page 60
IP66 IP69 NANOTTICA IP66 IP69 NANOTTICA MAX
PC, PCc PCc
page 24 page 60

NANOTTICA NANOTTICA WITH

FOR HIGH CEILINGS CLASS II INSULATION
page 28 page 63

IP66 IP69 NANOTTICA NB IP66 IP69 NANOTTICA CLASS II

PC, PCc PC, PCc
page 28 page 63

NANOTTICA NANOTTICA WITH

FOR LOW CEILINGS MOTION DETECTOR
page 32 page 67

IP66 IP69 NANOTTICA WB IP66 IP69 NANOTTICA SNS

PC, PCc PC, PCc
page 32 page 67

NANOTTICA ENERGY NANOTTICA

SAVER, CHEMICALLY
ACCESSORIES
RESISTANT VERSION
page 36 page 71

IP66 IP69 NANOTTICA ES NANOTTICA

ABS, ABSc ACCESSORIES
page 36 page 71

NANOTTICA CHEMICALLY
RESISTANT VERSION
page 40

IP66 IP69 NANOTTICA

ABS, ABSc
page 40

NANOTTICA FOR HIGH

CEILINGS, CHEMICALLY
RESISTANT VERSION
page 44
IP66 IP69 NANOTTICA NB
ABS, ABSc
page 44

www.bim.lighting

CZECH LIGHT FITTINGS 11

 NANOTTICA ES TRS

… energy saver, exceptional efficiency and UGR,

ceiling height from 3.5 to 8 m, impact resistant.
USE ADVANTAGES
Compared to its basic version, fully transparent • Maximum light fitting efficiency: 168 lm/W • Multipurpose snap-in mounting clips – easy
Nanottica ES TRS PC boasts considerably lower • Patented optics ensures absolute control attachment to a track lighting system with a
UGR values as well as lower energy consumption, over light beam distribution width of 60 mm
the latter translating into considerably higher lumi- • Exceptionally low UGR values range from • Optional throughwiring (up to 7 wires inside
nous efficacy (lm/W).
17.1 to 22.5 the light fitting)
The fitting is highly recommended for illumination • Light fitting protection IP66 / IP69 • Standard model CRI > 80: 4000 K
of premises where workers’ visual precision is of • High temperature resistance in a range from • On request CRI > 80: 3000 K, 5000 K, 6500 K
paramount importance. These include workshops ta = -25 °C to ta = 50 °C • CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
where fine assembly work is performed as well as • Lifetime: 50 000 hours / L90B10 • Optional delivery in dimmable version
craft workshops and visual inspection areas. • High mechanical resistance IK10 • Certificates: ESČ, ENEC, CB, HACCP
• Variable suspension pitch, optional instal-
Its standard beam angle makes it a perfect choice lation of light fitting even on an existing
for premises with an optimum luminaire installation
height of 3.5 to 8 m. It is designed for indoor spaces,
structure on which the original light fittings
industrial premises, agricultural buildings, ware- were suspended
houses as well as sports facilities, transport hubs,
car parks and garages, workshops and labora-
tories with no explosion hazard. IP69-rated and
HACCP-compliant, the fitting’s design also makes it up to up to
a great choice for the food industry. LED
50ºC -25ºC

Made of clear polycarbonate, the base and the dif- 220-240 V DALI CRI
L 90
fuser boast high impact and deformation resist- >80 B 10
ance. Emissions in the environment of use may
reduce the usability of the plastics; for more infor- HACCP
mation see page 325.

12
 NANOTTICA ES TRS PC, PCc

NANOTTICA ES TRS P C, PCc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 / IP69 • Body: transparent PC (high mechanical
• Maximum ambient temperature: ta = 50 °C resistance, UV stability)
• Maximum ambient temperature: ta = 0-25 °C • Reflector: steel sheet, white colour (RAL 9003)
for version with emergency back-up M1h, M3h • Multipurpose mounting clips: stainless steel,
• Lifetime: 50 000 hours / L90B10 stainless steel hooks included
• Maximum light fitting efficiency: 168 lm/W • Clips: polyamide + 15 % glass fibre or stain-
• UGR ranging from 17.1 to 22.5 less steel + polyamide
• Optimum luminaire installation height from • Sealing: polyurethane (PUR), foamed body
3.5 to 8 m groove
• CRI > 80: 4000 K – standard • Cable glands: screwed PG 13.5
• CRI > 80: 3000 K, 5000 K, 6500 K - on request (standard), or rubber (SBS)
• CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K • Terminal block: screwless, three-pole (basic
- on request version), or screwed
• MacAdam = 3 SDCM • The values stated for power consumption and
• Diffuser: transparent PC with nanooptics luminous flux are in a tolerance of ± 7.5 %
(high mechanical resistance, UV stability)

NANOTTICA 1.5ft ES TRS

150° 180° 150°

A UGR EVALUATED FOR

120° 120°
D
98 X = 4 H, Y = 8 H S = 0.25 H
variable mounting pitch
90° 90°

Reflectivity 70/50/20

84
79
C0
60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System UGR Net
A D
Type temperature of LED modules of light fitting consumption efficacy Longitudinal/ weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] transverse [kg]
Up to ambient temperature ta = 50 °C - body transparent polycarbonate - diffusor with nanooptics (standard beam angle), transparent polycarbonate
NANOTTICA 1,2ft ES TRS PC 1300/840 50 1330 1250 8 156 17.1 / 18.9 0,9 615 110 - 370
NANOTTICA 1.2ft ES TRS PC 1600/840 50 1620 1520 10 152 17.8 / 19.5 0,9 615 110 - 370
NANOTTICA 1.2ft ES TRS PC 2200/840 45 2230 2100 14 150 18.9 / 20.7 0,9 615 110 - 370
NANOTTICA 1.4ft ES TRS PC 2600/840 50 2630 2470 16 154 17.3 / 19.3 1,7 1175 700 - 960
NANOTTICA 1.4ft ES TRS PC 3200/840 50 3180 2990 20 150 18.0 / 20.0 1,7 1175 700 - 960
NANOTTICA 1.4ft ES TRS PC 4400/840 45 4450 4180 27 155 19.1 / 21.1 1,7 1175 700 - 960
NANOTTICA 1.4ft ES TRS PC 6400/840 45 6310 5930 38 156 20.4 / 22.4 1,7 1175 700 - 960
NANOTTICA 1.5ft ES TRS PC 3250/840 50 3290 3090 20 155 17.3 / 19.4 2,0 1455 970 - 1230
NANOTTICA 1.5ft ES TRS PC 4000/840 50 4050 3810 24 159 18.0 / 20.1 2,0 1455 970 - 1230
NANOTTICA 1.5ft ES TRS PC 5500/840 45 5560 5230 33 158 19.1 / 21.2 2,0 1455 970 - 1230
NANOTTICA 1.5ft ES TRS PC 8000/840 45 8020 7540 45 168 20.4 / 22.5 2,0 1455 970 - 1230

NANOTTICA ES TRS PC Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

103134 NANOTTICA 1.2ft ES TRS PC 1300/840 103145 103156 103167 x x x
103135 NANOTTICA 1.2ft ES TRS PC 1600/840 103146 103157 103168 x x x
103136 NANOTTICA 1.2ft ES TRS PC 2200/840 103147 103158 103169 x x x
103137 NANOTTICA 1.4ft ES TRS PC 2600/840 103148 103159 103170 103178 103186 103194
103138 NANOTTICA 1.4ft ES TRS PC 3200/840 103149 103160 103171 103179 103187 103195
103139 NANOTTICA 1.4ft ES TRS PC 4400/840 103150 103161 103172 103180 103188 103196
103140 NANOTTICA 1.4ft ES TRS PC 6400/840 103151 103162 103173 103181 103189 103197
103141 NANOTTICA 1.5ft ES TRS PC 3250/840 103152 103163 103174 103182 103190 103198
103142 NANOTTICA 1.5ft ES TRS PC 4000/840 103153 103164 103175 103183 103191 103199
103143 NANOTTICA 1.5ft ES TRS PC 5500/840 103154 103165 103176 103184 103192 103200
103144 NANOTTICA 1.5ft ES TRS PC 8000/840 103155 103166 103177 103185 103193 103201

NANOTTICA ES TRS PCc Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

103202 NANOTTICA 1.2ft ES TRS PCc 1300/840 103213 103224 103235 x x x
103203 NANOTTICA 1.2ft ES TRS PCc 1600/840 103214 103225 103236 x x x
103204 NANOTTICA 1.2ft ES TRS PCc 2200/840 103215 103226 103237 x x x
103205 NANOTTICA 1.4ft ES TRS PCc 2600/840 103216 103227 103238 103246 103254 103262
103206 NANOTTICA 1.4ft ES TRS PCc 3200/840 103217 103228 103239 103247 103255 103263
103207 NANOTTICA 1.4ft ES TRS PCc 4400/840 103218 103229 103240 103248 103256 103264
103208 NANOTTICA 1.4ft ES TRS PCc 6400/840 103219 103230 103241 103249 103257 103265
103209 NANOTTICA 1.5ft ES TRS PCc 3250/840 103220 103231 103242 103250 103258 103266
103210 NANOTTICA 1.5ft ES TRS PCc 4000/840 103221 103232 103243 103251 103259 103267
103211 NANOTTICA 1.5ft ES TRS PCc 5500/840 103222 103233 103244 103252 103260 103268
103212 NANOTTICA 1.5ft ES TRS PCc 8000/840 103223 103234 103245 103253 103261 103269

CZECH LIGHT FITTINGS 13

 NANOTTICA ES TRS PC, PCc

NANOTTICA ES TRS PC DALI Digital dimmable driver DALI - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

103270 NANOTTICA 1.2ft ES TRS PC 1300/840 DALI 103281 x 103303 x x x
103271 NANOTTICA 1.2ft ES TRS PC 1600/840 DALI 103282 x 103304 x x x
103272 NANOTTICA 1.2ft ES TRS PC 2200/840 DALI 103283 x 103305 x x x
103273 NANOTTICA 1.4ft ES TRS PC 2600/840 DALI 103284 103295 103306 103314 103322 103330
103274 NANOTTICA 1.4ft ES TRS PC 3200/840 DALI 103285 103296 103307 103315 103323 103331
103275 NANOTTICA 1.4ft ES TRS PC 4400/840 DALI 103286 103297 103308 103316 103324 103332
103276 NANOTTICA 1.4ft ES TRS PC 6400/840 DALI 103287 103298 103309 103317 103325 103333
103277 NANOTTICA 1.5ft ES TRS PC 3250/840 DALI 103288 103299 103310 103318 103326 103334
103278 NANOTTICA 1.5ft ES TRS PC 4000/840 DALI 103289 103300 103311 103319 103327 103335
103279 NANOTTICA 1.5ft ES TRS PC 5500/840 DALI 103290 103301 103312 103320 103328 103336
103280 NANOTTICA 1.5ft ES TRS PC 8000/840 DALI 103291 103302 103313 103321 103329 103337

NANOTTICA ES TRS PCc DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

103338 NANOTTICA 1.2ft ES TRS PCc 1300/840 DALI 103349 x 103371 x x x
103339 NANOTTICA 1.2ft ES TRS PCc 1600/840 DALI 103350 x 103372 x x x
103340 NANOTTICA 1.2ft ES TRS PCc 2200/840 DALI 103351 x 103373 x x x
103341 NANOTTICA 1.4ft ES TRS PCc 2600/840 DALI 103352 103363 103374 103382 103390 103398
103342 NANOTTICA 1.4ft ES TRS PCc 3200/840 DALI 103353 103364 103375 103383 103391 103399
103343 NANOTTICA 1.4ft ES TRS PCc 4400/840 DALI 103354 103365 103376 103384 103392 103400
103344 NANOTTICA 1.4ft ES TRS PCc 6400/840 DALI 103355 103366 103377 103385 103393 103401
103345 NANOTTICA 1.5ft ES TRS PCc 3250/840 DALI 103356 103367 103378 103386 103394 103402
103346 NANOTTICA 1.5ft ES TRS PCc 4000/840 DALI 103357 103368 103379 103387 103395 103403
103347 NANOTTICA 1.5ft ES TRS PCc 5500/840 DALI 103358 103369 103380 103388 103396 103404
103348 NANOTTICA 1.5ft ES TRS PCc 8000/840 DALI 103359 103370 103381 103389 103397 103405

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

14
 NANOTTICA ES TRS PC, PCc

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) To be attached to a track lighting system with a width of 60 mm using stainless steel snap-in mounting clips
d) Attachment with the use of side hangers to the wall

VARIABLE INSTALLATION PITCH

NANOTTICA ES TRS

MAXIMUM

MINIMUM

LIGHT FITTING DETAILED VIEW

NANOTTICA ES TRS

CZECH LIGHT FITTINGS 15

 NANOTTICA ES

… energy saver, exceptional efficiency,

ceiling height from 3.5 to 8 m, impact resistant.
USE ADVANTAGES
Compared to its basic version, Nanottica ES boasts • Maximum light fitting efficiency: 168 lm/W • Optional throughwiring (up to 7 wires inside
lower energy consumption, which translates into • Patented optics ensures absolute control the light fitting)
considerably higher luminous efficacy (lm/W). over light beam distribution • Standard model CRI > 80: 4000 K
• Low UGR ranging from 19.1 to 23.6 • On request CRI > 80: 3000 K, 5000 K, 6500 K
The fitting is highly recommended for illumination • Light fitting protection IP66 / IP69 • CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
of premises where workers’ visual precision is of • High temperature resistance in a range from • Optional delivery in dimmable version
paramount importance. These include workshops
ta = -25 °C to ta = 50 °C • Certificates: ESČ, ENEC, CB, HACCP
where fine assembly work is performed as well as
• Lifetime: 50 000 hours / L90B10
craft workshops and visual inspection areas.
• High mechanical resistance IK10
Its standard beam angle makes it a perfect choice • Variable suspension pitch, optional instal-
for premises with an optimum luminaire installation lation of light fitting even on an existing
height of 3.5 to 8 m. It is designed for indoor spaces, structure on which the original light fittings
industrial premises, agricultural buildings, ware- were suspended
houses as well as sports facilities, transport hubs, • Multipurpose snap-in mounting clips – easy
car parks and garages, workshops and labora- attachment to a track lighting system with a
tories with no explosion hazard. IP69-rated and width of 60 mm
HACCP-compliant, the fitting’s design also makes it
a great choice for the food industry. up to up to
LED
Made of clear polycarbonate, the base and the dif- 50ºC -25ºC

fuser boast high impact and deformation resist- 220-240 V DALI CRI
L 90
ance. Emissions in the environment of use may >80 B 10
reduce the usability of the plastics; for more infor-
mation see page 325. HACCP

16
 NANOTTICA ES PC, PCc

NANOTTICA ES PC, PCc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 / IP69 • Body: grey PC (high mechanical resistance,
• Maximum ambient temperature: ta = 50 °C UV stability)
• Maximum ambient temperature: ta = 0-25 °C • Reflector: steel sheet, white colour (RAL 9003)
for version with emergency back-up M1h, M3h • Multipurpose mounting clips: stainless steel,
• Lifetime: 50 000 hours / L90B10 stainless steel hooks included
• Maximum light fitting efficiency: 168 lm/W • Clips: polyamide + 15 % glass fibre or stain-
• UGR ranging from 19.1 to 23.6 less steel + polyamide
• Optimum luminaire installation height • Sealing: polyurethane (PUR), foamed body
from 3.5 to 8 m groove
• CRI > 80: 4000 K – standard • Cable glands: screwed PG 13.5 (standard), or
• CRI > 80: 3000 K, 5000 K, 6500 K - on request rubber (SBS)
• CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K • Terminal block: screwless, three-pole (basic
- on request version), or screwed
• MacAdam = 3 SDCM • The values stated for power consumption and
• Diffuser: transparent PC with nanooptics luminous flux are in a tolerance of ± 7.5 %
(high mechanical resistance, UV stability)

NANOTTICA 1.5ft ES
150° 180° 150°

A UGR EVALUATED FOR

120° 120°
D
98 X = 4 H, Y = 8 H S = 0.25 H
variable mounting pitch
90° 90°

Reflectivity 70/50/20

84
79
C0
60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System UGR Net
A D
Type temperature of LED modules of light fitting consumption efficacy Longitudinal/ weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] transverse [kg]
Up to ambient temperature ta = 50 °C - body: grey polycarbonate - diffusor with nanooptics (standard beam angle), transparent polycarbonate
NANOTTICA 1.2ft ES PC 1300/840 50 1330 1250 8 156 19.1 / 20.1 0,9 615 110 - 370
NANOTTICA 1.2ft ES PC 1600/840 50 1620 1520 10 152 19.8 / 20.8 0,9 615 110 - 370
NANOTTICA 1.2ft ES PC 2200/840 45 2230 2100 14 150 20.9 / 21.9 0,9 615 110 - 370
NANOTTICA 1.4ft ES PC 2600/840 50 2630 2470 16 154 19.3 / 20.4 1,7 1175 700 - 960
NANOTTICA 1.4ft ES PC 3200/840 50 3180 2990 20 150 20.0 / 21.1 1,7 1175 700 - 960
NANOTTICA 1.4ft ES PC 4400/840 45 4450 4180 27 155 21.1 / 22.2 1,7 1175 700 - 960
NANOTTICA 1.4ft ES PC 6400/840 45 6310 5930 38 156 22.4 / 23.5 1,7 1175 700 - 960
NANOTTICA 1.5ft ES PC 3250/840 50 3290 3090 20 155 19.3 / 20.4 2,0 1455 970 - 1230
NANOTTICA 1.5ft ES PC 4000/840 50 4050 3810 24 159 20.0 / 21.2 2,0 1455 970 - 1230
NANOTTICA 1.5ft ES PC 5500/840 45 5560 5230 33 158 21.1 / 22.3 2,0 1455 970 - 1230
NANOTTICA 1.5ft ES PC 8000/840 45 8020 7540 45 168 22.4 / 23.6 2,0 1455 970 - 1230

NANOTTICA ES PC Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

102550 NANOTTICA 1.2ft ES PC 1300/840 102561 102572 102583 x x x
102551 NANOTTICA 1.2ft ES PC 1600/840 102562 102573 102584 x x x
102552 NANOTTICA 1.2ft ES PC 2200/840 102563 102574 102585 x x x
102553 NANOTTICA 1.4ft ES PC 2600/840 102564 102575 102586 102594 102602 102610
102554 NANOTTICA 1.4ft ES PC 3200/840 102565 102576 102587 102595 102603 102611
102555 NANOTTICA 1.4ft ES PC 4400/840 102566 102577 102588 102596 102604 102612
102556 NANOTTICA 1.4ft ES PC 6400/840 102567 102578 102589 102597 102605 102613
102557 NANOTTICA 1.5ft ES PC 3250/840 102568 102579 102590 102598 102606 102614
102558 NANOTTICA 1.5ft ES PC 4000/840 102569 102580 102591 102599 102607 102615
102559 NANOTTICA 1.5ft ES PC 5500/840 102570 102581 102592 102600 102608 102616
102560 NANOTTICA 1.5ft ES PC 8000/840 102571 102582 102593 102601 102609 102617

NANOTTICA ES PCc Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

102618 NANOTTICA 1.2ft ES PCc 1300/840 102629 102640 102651 x x x
102619 NANOTTICA 1.2ft ES PCc 1600/840 102630 102641 102652 x x x
102620 NANOTTICA 1.2ft ES PCc 2200/840 102631 102642 102653 x x x
102621 NANOTTICA 1.4ft ES PCc 2600/840 102632 102643 102654 102662 102670 102678
102622 NANOTTICA 1.4ft ES PCc 3200/840 102633 102644 102655 102663 102671 102679
102623 NANOTTICA 1.4ft ES PCc 4400/840 102634 102645 102656 102664 102672 102680
102624 NANOTTICA 1.4ft ES PCc 6400/840 102635 102646 102657 102665 102673 102681
102625 NANOTTICA 1.5ft ES PCc 3250/840 102636 102647 102658 102666 102674 102682
102626 NANOTTICA 1.5ft ES PCc 4000/840 102637 102648 102659 102667 102675 102683
102627 NANOTTICA 1.5ft ES PCc 5500/840 102638 102649 102660 102668 102676 102684
102628 NANOTTICA 1.5ft ES PCc 8000/840 102639 102650 102661 102669 102677 102685

CZECH LIGHT FITTINGS 17

 NANOTTICA ES PC, PCc

NANOTTICA ES PC DALI Digital dimmable driver DALI - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

102686 NANOTTICA 1.2ft ES PC 1300/840 DALI 102697 x 102719 x x x
102687 NANOTTICA 1.2ft ES PC 1600/840 DALI 102698 x 102720 x x x
102688 NANOTTICA 1.2ft ES PC 2200/840 DALI 102699 x 102721 x x x
102689 NANOTTICA 1.4ft ES PC 2600/840 DALI 102700 102711 102722 102730 102738 102746
102690 NANOTTICA 1.4ft ES PC 3200/840 DALI 102701 102712 102723 102731 102739 102747
102691 NANOTTICA 1.4ft ES PC 4400/840 DALI 102702 102713 102724 102732 102740 102748
102692 NANOTTICA 1.4ft ES PC 6400/840 DALI 102703 102714 102725 102733 102741 102749
102693 NANOTTICA 1.5ft ES PC 3250/840 DALI 102704 102715 102726 102734 102742 102750
102694 NANOTTICA 1.5ft ES PC 4000/840 DALI 102705 102716 102727 102735 102743 102751
102695 NANOTTICA 1.5ft ES PC 5500/840 DALI 102706 102717 102728 102736 102744 102752
102696 NANOTTICA 1.5ft ES PC 8000/840 DALI 102707 102718 102729 102737 102745 102753

NANOTTICA ES PCc DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

102754 NANOTTICA 1.2ft ES PCc 1300/840 DALI 102765 x 102787 x x x
102755 NANOTTICA 1.2ft ES PCc 1600/840 DALI 102766 x 102788 x x x
102756 NANOTTICA 1.2ft ES PCc 2200/840 DALI 102767 x 102789 x x x
102757 NANOTTICA 1.4ft ES PCc 2600/840 DALI 102768 102779 102790 102798 102806 102814
102758 NANOTTICA 1.4ft ES PCc 3200/840 DALI 102769 102780 102791 102799 102807 102815
102759 NANOTTICA 1.4ft ES PCc 4400/840 DALI 102770 102781 102792 102800 102808 102816
102760 NANOTTICA 1.4ft ES PCc 6400/840 DALI 102771 102782 102793 102801 102809 102817
102761 NANOTTICA 1.5ft ES PCc 3250/840 DALI 102772 102783 102794 102802 102810 102818
102762 NANOTTICA 1.5ft ES PCc 4000/840 DALI 102773 102784 102795 102803 102811 102819
102763 NANOTTICA 1.5ft ES PCc 5500/840 DALI 102774 102785 102796 102804 102812 102820
102764 NANOTTICA 1.5ft ES PCc 8000/840 DALI 102775 102786 102797 102805 102813 102821

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

18
 NANOTTICA ES PC, PCc

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) To be attached to a track lighting system with a width of 60 mm using stainless steel snap-in mounting clips
d) Attachment with the use of side hangers to the wall

VARIABLE INSTALLATION PITCH

NANOTTICA ES PC

MAXIMUM

MINIMUM

LIGHT FITTING DETAILED VIEW

NANOTTICA ES PC

CZECH LIGHT FITTINGS 19

 NANOTTICA TRS

… exceptionally low UGR, ceiling height from 3.5 to 8 m,

impact resistant.
USE ADVANTAGES
Compared to its basic version, fully transparent • Maximum light fitting efficiency: 162 lm/W • Multipurpose snap-in mounting clips – easy
Nanottica TRS PC boasts considerably lower UGR • Patented optics ensures absolute control attachment to a track lighting system with a
values. over light beam distribution width of 60 mm
• Exceptionally low UGR values range from • Optional throughwiring (up to 7 wires inside
The fitting is highly recommended for illumination 17.1 to 22.4 the light fitting)
of premises where workers’ visual precision is of • Light fitting protection IP66 / IP69 • Standard model CRI > 80: 4000 K
paramount importance. These include workshops
• High temperature resistance in a range from • On request CRI > 80: 3000 K, 5000 K, 6500 K
where fine assembly work is performed as well as
ta = -25 °C to ta = 50 °C • CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
craft workshops and visual inspection areas.
• Lifetime: 50 000 hours / L90B10 • Optional delivery in dimmable version
Its standard beam angle makes it a perfect choice • High mechanical resistance IK10 • Certificates: ESČ, ENEC, CB, HACCP
for premises with an optimum luminaire installation • Variable suspension pitch, optional instal-
height of 3.5 to 8 m. It is designed for indoor spaces, lation of light fitting even on an existing
industrial premises, agricultural buildings, ware- structure on which the original light fittings
houses as well as sports facilities, transport hubs, were suspended
car parks and garages, workshops and labora-
tories with no explosion hazard. IP69-rated and
HACCP-compliant, the fitting’s design also makes it
a great choice for the food industry. up to up to
LED
Made of clear polycarbonate, the base and the dif- 50ºC -25ºC

fuser boast high impact and deformation resist- 220-240 V DALI CRI
L 90
ance. Emissions in the environment of use may >80 B 10
reduce the usability of the plastics; for more infor-
mation see page 325. HACCP

20
 NANOTTICA TRS PC, PCc

NANOTTICA TRS P C, PCc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 / IP69 • Body: transparent PC (high mechanical
• Maximum ambient temperature: ta = 50 °C resistance, UV stability)
• Maximum ambient temperature: ta = 0-25 °C • Reflector: steel sheet, white colour (RAL 9003)
for version with emergency back-up M1h, M3h • Multipurpose mounting clips: stainless steel,
• Lifetime: 50 000 hours / L90B10 stainless steel hooks included
• Maximum light fitting efficiency: 162 lm/W • Clips: polyamide + 15 % glass fibre or stain-
• UGR ranging from 17.1 to 22.4 less steel + polyamide
• Optimum luminaire installation height from • Sealing: polyurethane (PUR), foamed body
3.5 to 8 m groove
• CRI > 80: 4000 K – standard • Cable glands: screwed PG 13.5
• CRI > 80: 3000 K, 5000 K, 6500 K - on request (standard), or rubber (SBS)
• CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K • Terminal block: screwless, three-pole (basic
- on request version), or screwed
• MacAdam = 3 SDCM • The values stated for power consumption and
• Diffuser: transparent PC with nanooptics luminous flux are in a tolerance of ± 7.5 %
(high mechanical resistance, UV stability)

NANOTTICA 1.5ft TRS

150° 180° 150°

A UGR EVALUATED FOR

120° 120°
D
98 X = 4 H, Y = 8 H S = 0.25 H
variable mounting pitch
90° 90°

Reflectivity 70/50/20

84
79
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System UGR Net
A D
Type temperature of LED modules of light fitting consumption efficacy Longitudinal/ weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] transverse [kg]
Up to ambient temperature ta = 50 °C - body transparent polycarbonate - diffusor with nanooptics (standard beam angle), transparent polycarbonate
NANOTTICA 1.2ft TRS PC 1300/840 50 1320 1240 8 155 17.1 / 18.8 0,9 615 110 - 370
NANOTTICA 1.2ft TRS PC 1600/840 50 1580 1490 10 149 17.7 / 19.5 0,9 615 110 - 370
NANOTTICA 1.2ft TRS PC 2200/840 45 2200 2070 14 148 18.8 / 20.6 0,9 615 110 - 370
NANOTTICA 1.4ft TRS PC 2600/840 50 2580 2430 16 152 17.2 / 19.2 1,7 1175 700 - 960
NANOTTICA 1.4ft TRS PC 3200/840 50 3110 2920 20 146 17.8 / 19.9 1,7 1175 700 - 960
NANOTTICA 1.4ft TRS PC 4400/840 45 4350 4090 27 151 19.0 / 21.0 1,7 1175 700 - 960
NANOTTICA 1.4ft TRS PC 6400/840 45 6260 5880 38 155 20.3 / 22.3 1,7 1175 700 - 960
NANOTTICA 1.5ft TRS PC 3250/840 50 3240 3050 20 153 17.3 / 19.3 2,0 1455 970 - 1230
NANOTTICA 1.5ft TRS PC 4000/840 50 3880 3650 24 152 17.9 / 20.0 2,0 1455 970 - 1230
NANOTTICA 1.5ft TRS PC 5500/840 45 5420 5090 33 154 19.0 / 21.1 2,0 1455 970 - 1230
NANOTTICA 1.5ft TRS PC 8000/840 45 7740 7280 45 162 20.3 / 22.4 2,0 1455 970 - 1230

NANOTTICA TRS PC Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

103118 NANOTTICA 1.2ft TRS PC 1300/840 103121 101563 101574 x x x
103119 NANOTTICA 1.2ft TRS PC 1600/840 101553 101564 101575 x x x
103120 NANOTTICA 1.2ft TRS PC 2200/840 101554 101565 101576 x x x
101544 NANOTTICA 1.4ft TRS PC 2600/840 101555 101566 101577 101585 101593 101601
101545 NANOTTICA 1.4ft TRS PC 3200/840 101556 101567 101578 101586 101594 101602
101546 NANOTTICA 1.4ft TRS PC 4400/840 101557 101568 101579 101587 101595 101603
101547 NANOTTICA 1.4ft TRS PC 6400/840 101558 101569 101580 101588 101596 101604
101548 NANOTTICA 1.5ft TRS PC 3250/840 101559 101570 101581 101589 101597 101605
101549 NANOTTICA 1.5ft TRS PC 4000/840 101560 101571 101582 101590 101598 101606
101550 NANOTTICA 1.5ft TRS PC 5500/840 101561 101572 101583 101591 101599 101607
101551 NANOTTICA 1.5ft TRS PC 8000/840 101562 101573 101584 101592 101600 101608

NANOTTICA TRS PCc Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

101609 NANOTTICA 1.2ft TRS PCc 1300/840 101620 101631 101642 x x x
101610 NANOTTICA 1.2ft TRS PCc 1600/840 101621 101632 101643 x x x
101611 NANOTTICA 1.2ft TRS PCc 2200/840 101622 101633 101644 x x x
101612 NANOTTICA 1.4ft TRS PCc 2600/840 101623 101634 101645 101653 101661 x
101613 NANOTTICA 1.4ft TRS PCc 3200/840 101624 101635 101646 101654 101662 101670
101614 NANOTTICA 1.4ft TRS PCc 4400/840 101625 101636 101647 101655 101663 101671
101615 NANOTTICA 1.4ft TRS PCc 6400/840 101626 101637 101648 101656 101664 101672
101616 NANOTTICA 1.5ft TRS PCc 3250/840 101627 101638 101649 101657 101665 101673
101617 NANOTTICA 1.5ft TRS PCc 4000/840 101628 101639 101650 101658 101666 101674
101618 NANOTTICA 1.5ft TRS PCc 5500/840 101629 101640 101651 101659 101667 101675
101619 NANOTTICA 1.5ft TRS PCc 8000/840 101630 101641 101652 101660 101668 101676

CZECH LIGHT FITTINGS 21

 NANOTTICA TRS PC, PCc

NANOTTICA TRS PC DALI Digital dimmable driver DALI - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

101677 NANOTTICA 1.2ft TRS PC 1300/840 DALI 101688 x 101710 x x x
101678 NANOTTICA 1.2ft TRS PC 1600/840 DALI 101689 x 101711 x x x
101679 NANOTTICA 1.2ft TRS PC 2200/840 DALI 101690 x 101712 x x x
101680 NANOTTICA 1.4ft TRS PC 2600/840 DALI 101691 101702 101713 101721 101729 101737
101681 NANOTTICA 1.4ft TRS PC 3200/840 DALI 101692 101703 101714 101722 101730 101738
101682 NANOTTICA 1.4ft TRS PC 4400/840 DALI 101693 101704 101715 101723 101731 101739
101683 NANOTTICA 1.4ft TRS PC 6400/840 DALI 101694 101705 101716 101724 101732 101740
101684 NANOTTICA 1.5ft TRS PC 3250/840 DALI 101695 101706 101717 101725 101733 101741
101685 NANOTTICA 1.5ft TRS PC 4000/840 DALI 101696 101707 101718 101726 101734 101742
101686 NANOTTICA 1.5ft TRS PC 5500/840 DALI 101697 101708 101719 101727 101735 101743
101687 NANOTTICA 1.5ft TRS PC 8000/840 DALI 101698 101709 101720 101728 101736 101744

NANOTTICA TRS PCc DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

101745 NANOTTICA 1.2ft TRS PCc 1300/840 DALI 101756 x 101778 x x x
101746 NANOTTICA 1.2ft TRS PCc 1600/840 DALI 101757 x 101779 x x x
101747 NANOTTICA 1.2ft TRS PCc 2200/840 DALI 101758 x 101780 x x x
101748 NANOTTICA 1.4ft TRS PCc 2600/840 DALI 101759 101770 101781 101789 101797 101805
101749 NANOTTICA 1.4ft TRS PCc 3200/840 DALI 101760 101771 101782 101790 101798 101806
101750 NANOTTICA 1.4ft TRS PCc 4400/840 DALI 101761 101772 101783 101791 101799 101807
101751 NANOTTICA 1.4ft TRS PCc 6400/840 DALI 101762 101773 101784 101792 101800 101808
101752 NANOTTICA 1.5ft TRS PCc 3250/840 DALI 101763 101774 101785 101793 101801 101809
101753 NANOTTICA 1.5ft TRS PCc 4000/840 DALI 101764 101775 101786 101794 101802 101810
101754 NANOTTICA 1.5ft TRS PCc 5500/840 DALI 101765 101776 101787 101795 101803 101811
101755 NANOTTICA 1.5ft TRS PCc 8000/840 DALI 101766 101777 101788 101796 101804 101812

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

22
 NANOTTICA TRS PC, PCc

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) To be attached to a track lighting system with a width of 60 mm using stainless steel snap-in mounting clips
d) Attachment with the use of side hangers to the wall

VARIABLE INSTALLATION PITCH

NANOTTICA TRS

MAXIMUM

MINIMUM

LIGHT FITTING DETAILED VIEW

NANOTTICA TRS

CZECH LIGHT FITTINGS 23

 NANOTTICA

… ceiling height from 3.5 to 8 m, impact resistant.

USE ADVANTAGES
The fixture boasts a low unified glare rating with • Patented optics ensures absolute control • Optional throughwiring (up to 7 wires inside
UGR values its patented nanooptics. This ensures over light beam distribution the light fitting)
eye comfort, high visual performance and work- • Low UGR ranging from 19.1 to 23.4 • Standard model CRI > 80: 4000 K
place safety, which indirectly translates into higher • Light fitting protection IP66 / IP69 • On request CRI > 80: 3000 K, 5000 K, 6500 K
productivity.
• High temperature resistance in a range from • CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
The fitting is highly recommended for illumination ta = -25 °C to ta = 50 °C • Optional delivery in dimmable version
of premises where workers’ visual precision is of • Lifetime: 50 000 hours / L90B10 • Certificates: ESČ, ENEC, CB, HACCP
paramount importance. These include workshops • High mechanical resistance IK10
where fine assembly work is performed as well as • Variable suspension pitch, optional instal-
craft workshops and visual inspection areas. lation of light fitting even on an existing
structure on which the original light fittings
Its standard beam angle makes it a perfect choice were suspended
for premises with an optimum luminaire installation
height of 3.5 to 8 m. It is designed for indoor spaces,
• Multipurpose snap-in mounting clips – easy
industrial premises, agricultural buildings, ware- attachment to a track lighting system with a
houses as well as sports facilities, transport hubs, width of 60 mm
car parks and garages, workshops and labora-
tories with no explosion hazard. IP69-rated and
HACCP-compliant, the fitting’s design also makes it up to up to
a great choice for the food industry. LED
50ºC -25ºC

Made of clear polycarbonate, the base and the dif- 220-240 V DALI CRI
L 90
fuser boast high impact and deformation resist- >80 B 10
ance. Emissions in the environment of use may
reduce the usability of the plastics; for more infor-
HACCP
mation see page 325.

24
 NANOTTICA PC, PCc

NANOTTICA PC, PCc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 / IP69 • Body: grey PC (high mechanical resistance,
• Maximum ambient temperature: ta = 50 °C UV stability)
• Maximum ambient temperature: ta = 0-25 °C • Reflector: steel sheet, white colour (RAL 9003)
for version with emergency back-up M1h, M3h • Multipurpose mounting clips: stainless steel,
• Lifetime: 50 000 hours / L90B10 stainless steel hooks included
• Maximum light fitting efficiency: 162 lm/W • Clips: polyamide + 15 % glass fibre or stain-
• UGR ranging from 19.1 to 23.4 less steel + polyamide
• Optimum luminaire installation height • Sealing: polyurethane (PUR), foamed body
from 3.5 to 8 m groove
• CRI > 80: 4000 K – standard • Cable glands: screwed PG 13.5 (standard), or
• CRI > 80: 3000 K, 5000 K, 6500 K - on request rubber (SBS)
• CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K • Terminal block: screwless, three-pole (basic
- on request version), or screwed
• MacAdam = 3 SDCM • The values stated for power consumption and
• Diffuser: transparent PC with nanooptics luminous flux are in a tolerance of ± 7.5 %
(high mechanical resistance, UV stability)

NANOTTICA 1.5ft
150° 180° 150°

A UGR EVALUATED FOR

120° 120°
D
98 X = 4 H, Y = 8 H S = 0.25 H
variable mounting pitch
90° 90°

Reflectivity 70/50/20

84
79
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System UGR Net
A D
Type temperature of LED modules of light fitting consumption efficacy Longitudinal/ weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] transverse [kg]
Up to ambient temperature ta = 50 °C - body: grey polycarbonate - diffusor with nanooptics (standard beam angle), transparent polycarbonate
NANOTTICA 1.2ft PC 1300/840 50 1320 1240 8 155 19.1 / 20.1 0,9 615 110 - 370
NANOTTICA 1.2ft PC 1600/840 50 1580 1490 10 149 19.7 / 20.7 0,9 615 110 - 370
NANOTTICA 1.2ft PC 2200/840 45 2200 2070 14 148 20.9 / 21.8 0,9 615 110 - 370
NANOTTICA 1.4ft PC 2600/840 50 2580 2430 16 152 19.2 / 20.3 1,7 1175 700 - 960
NANOTTICA 1.4ft PC 3200/840 50 3110 2920 20 146 19.9 / 20.9 1,7 1175 700 - 960
NANOTTICA 1.4ft PC 4400/840 45 4350 4090 27 151 21.0 / 22.1 1,7 1175 700 - 960
NANOTTICA 1.4ft PC 6400/840 45 6260 5880 38 155 22.3 / 23.4 1,7 1175 700 - 960
NANOTTICA 1.5ft PC 3250/840 50 3240 3050 20 153 19.3 / 20.4 2,0 1455 970 - 1230
NANOTTICA 1.5ft PC 4000/840 50 3880 3650 24 152 19.9 / 21.0 2,0 1455 970 - 1230
NANOTTICA 1.5ft PC 5500/840 45 5420 5090 33 154 21.0 / 22.2 2,0 1455 970 - 1230
NANOTTICA 1.5ft PC 8000/840 45 7740 7280 45 162 22.3 / 23.4 2,0 1455 970 - 1230

NANOTTICA PC Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

100001 NANOTTICA 1.2ft PC 1300/840 100012 100023 100034 x x x
100002 NANOTTICA 1.2ft PC 1600/840 100013 100024 100035 x x x
100003 NANOTTICA 1.2ft PC 2200/840 100014 100025 100036 x x x
100004 NANOTTICA 1.4ft PC 2600/840 100015 100026 100037 100045 100053 100061
100005 NANOTTICA 1.4ft PC 3200/840 100016 100027 100038 100046 100054 100062
100006 NANOTTICA 1.4ft PC 4400/840 100017 100028 100039 100047 100055 100063
100007 NANOTTICA 1.4ft PC 6400/840 100018 100029 100040 100048 100056 100064
100008 NANOTTICA 1.5ft PC 3250/840 100019 100030 100041 100049 100057 100065
100009 NANOTTICA 1.5ft PC 4000/840 100020 100031 100042 100050 100058 100066
100010 NANOTTICA 1.5ft PC 5500/840 100021 100032 100043 100051 100059 100067
100011 NANOTTICA 1.5ft PC 8000/840 100022 100033 100044 100052 100060 100068

NANOTTICA PCc Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

100069 NANOTTICA 1.2ft PCc 1300/840 100080 100091 100102 x x x
100070 NANOTTICA 1.2ft PCc 1600/840 100081 100092 100103 x x x
100071 NANOTTICA 1.2ft PCc 2200/840 100082 100093 100104 x x x
100072 NANOTTICA 1.4ft PCc 2600/840 100083 100094 100105 100113 100121 100129
100073 NANOTTICA 1.4ft PCc 3200/840 100084 100095 100106 100114 100122 100130
100074 NANOTTICA 1.4ft PCc 4400/840 100085 100096 100107 100115 100123 100131
100075 NANOTTICA 1.4ft PCc 6400/840 100086 100097 100108 100116 100124 100132
100076 NANOTTICA 1.5ft PCc 3250/840 100087 100098 100109 100117 100125 100133
100077 NANOTTICA 1.5ft PCc 4000/840 100088 100099 100110 100118 100126 100134
100078 NANOTTICA 1.5ft PCc 5500/840 100089 100100 100111 100119 100127 100135
100079 NANOTTICA 1.5ft PCc 8000/840 100090 100101 100112 100120 100128 100136

CZECH LIGHT FITTINGS 25

 NANOTTICA PC, PCc

NANOTTICA PC DALI Digital dimmable driver DALI - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

100137 NANOTTICA 1.2ft PC 1300/840 DALI 100148 x 100170 x x x
100138 NANOTTICA 1.2ft PC 1600/840 DALI 100149 x 100171 x x x
100139 NANOTTICA 1.2ft PC 2200/840 DALI 100150 x 100172 x x x
100140 NANOTTICA 1.4ft PC 2600/840 DALI 100151 100162 100173 100181 100189 100197
100141 NANOTTICA 1.4ft PC 3200/840 DALI 100152 100163 100174 100182 100190 100198
100142 NANOTTICA 1.4ft PC 4400/840 DALI 100153 100164 100175 100183 100191 100199
100143 NANOTTICA 1.4ft PC 6400/840 DALI 100154 100165 100176 100184 100192 100200
100144 NANOTTICA 1.5ft PC 3250/840 DALI 100155 100166 100177 100185 100193 100201
100145 NANOTTICA 1.5ft PC 4000/840 DALI 100156 100167 100178 100186 100194 100202
100146 NANOTTICA 1.5ft PC 5500/840 DALI 100157 100168 100179 100187 100195 100203
100147 NANOTTICA 1.5ft PC 8000/840 DALI 100158 100169 100180 100188 100196 100204

NANOTTICA PCc DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

100205 NANOTTICA 1.2ft PCc 1300/840 DALI 100216 x 100238 x x x
100206 NANOTTICA 1.2ft PCc 1600/840 DALI 100217 x 100239 x x x
100207 NANOTTICA 1.2ft PCc 2200/840 DALI 100218 x 100240 x x x
100208 NANOTTICA 1.4ft PCc 2600/840 DALI 100219 100230 100241 100249 100257 100265
100209 NANOTTICA 1.4ft PCc 3200/840 DALI 100220 100231 100242 100250 100258 100266
100210 NANOTTICA 1.4ft PCc 4400/840 DALI 100221 100232 100243 100251 100259 100267
100211 NANOTTICA 1.4ft PCc 6400/840 DALI 100222 100233 100244 100252 100260 100268
100212 NANOTTICA 1.5ft PCc 3250/840 DALI 100223 100234 100245 100253 100261 100269
100213 NANOTTICA 1.5ft PCc 4000/840 DALI 100224 100235 100246 100254 100262 100270
100214 NANOTTICA 1.5ft PCc 5500/840 DALI 100225 100236 100247 100255 100263 100271
100215 NANOTTICA 1.5ft PCc 8000/840 DALI 100226 100237 100248 100256 100264 100272

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

26
 NANOTTICA PC, PCc

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) To be attached to a track lighting system with a width of 60 mm using stainless steel snap-in mounting clips
d) Attachment with the use of side hangers to the wall

VARIABLE INSTALLATION PITCH

NANOTTICA PC

MAXIMUM

MINIMUM

LIGHT FITTING DETAILED VIEW

NANOTTICA PC

CZECH LIGHT FITTINGS 27

 NANOTTICA NB

… ceiling height from 7.5 to 12 m, impact resistant.

USE ADVANTAGES
The fixture boasts a low unified glare rating with • Patented optics ensures absolute control • Multipurpose snap-in mounting clips – easy
UGR values its patented nanooptics. This ensures over light beam distribution attachment to a track lighting system with a
eye comfort, high visual performance and work- • Low UGR ranging from 21.7 to 25 width of 60 mm
place safety, which indirectly translates into high- • Narrow Beam angle (NB), optimum luminaire • Optional throughwiring (up to 7 wires inside
er productivity. installation height from 7.5 to 12 m the light fitting)
• Light fitting protection IP66 / IP69 • Standard model CRI > 80: 4000 K
The luminaire’s narrow-beam angle makes it suit- • High temperature resistance in a range from • On request CRI > 80: 3000 K, 5000 K, 6500 K
able for premises with an optimum luminaire in- ta = -25 °C to ta = 45 °C • CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
stallation height of 7.5 to 12 m. • Lifetime: 50 000 hours / L90B10 • Optional delivery in dimmable version
• High mechanical resistance IK10 • Certificates: ESČ, ENEC, CB, HACCP
It is designed for indoor spaces, walls and large
• Variable suspension pitch, optional instal-
corridors in high industrial and agricultural
lation of light fitting even on an existing
buildings as well as in warehouses and sports
structure on which the original light fittings
facilities. It is also a great choice for warehouse
aisles and roofed sports halls. IP69-rated and
were suspended
HACCP-compliant, the fitting’s design also makes
it a perfect choice for the food industry.

Made of clear polycarbonate, the base and the dif- up to up to

fuser boast high impact and deformation resist- LED

50ºC -25ºC
ance. CRI
220-240 V DALI L 90
>80 B 10
Emissions in the environment of use may reduce
the usability of the plastics; for more information
see page 325. HACCP

28
 NANOTTICA NB PC, PCc

NANOTTICA NB PC, PCc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 / IP69 • Body: grey PC (high mechanical resistance,
• Maximum ambient temperature: ta = 45 °C UV stability)
• Maximum ambient temperature: ta = 0-25 °C • Reflector: steel sheet, white colour (RAL 9003)
for version with emergency back-up M1h, M3h • Multipurpose mounting clips: stainless steel,
• Lifetime: 50 000 hours / L90B10 stainless steel hooks included
• Maximum light fitting efficiency: 156 lm/W • Clips: polyamide + 15 % glass fibre or stain-
• UGR ranging from 21.7 to 25 less steel + polyamide
• Optimum luminaire installation height • Sealing: polyurethane (PUR), foamed body
from 7.5 to 12 m groove
• CRI > 80: 4000 K – standard • Cable glands: screwed PG 13.5
• CRI > 80: 3000 K, 5000 K, 6500 K - on request (standard), or rubber (SBS)
• CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K • Terminal block: screwless, three-pole (basic
- on request version), or screwed
• MacAdam = 3 SDCM • The values stated for power consumption and
• Diffuser: transparent PC with nanooptics Narrow luminous flux are in a tolerance of ± 7.5 %
Beam (high mechanical resistance, UV stability)

NANOTTICA 1.5ft NB
150° 180° 150°

A UGR EVALUATED FOR

120° 120°
D
98 X = 4 H, Y = 8 H S = 0.25 H
variable mounting pitch
90° 90°

Reflectivity 70/50/20

84
79
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System UGR Net
A D
Type temperature of LED modules of light fitting consumption efficacy Longitudinal/ weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] transverse [kg]
Up to ambient temperature ta = 45 °C - body: grey polycarbonate - diffusor with nanooptics NB (narrow beam angle), transparent polycarbonate
NANOTTICA 1.4ft NB PC 4400/840 45 4350 3960 27 147 23.7 / 21.6 1,7 1175 700 - 960
NANOTTICA 1.4ft NB PC 6400/840 45 6260 5700 38 150 25.0 / 22.9 1,7 1175 700 - 960
NANOTTICA 1.5ft NB PC 5500/840 45 5420 4930 33 149 23.7 / 21.7 2,0 1455 970 - 1230
NANOTTICA 1.5ft NB PC 8000/840 45 7740 7040 45 156 25.0 / 22.9 2,0 1455 970 - 1230

NANOTTICA NB PC Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

100273 NANOTTICA 1.4ft NB PC 4400/840 100277 100281 100285 100289 100293 100297
100274 NANOTTICA 1.4ft NB PC 6400/840 100278 100282 100286 100290 100294 100298
100275 NANOTTICA 1.5ft NB PC 5500/840 100279 100283 100287 100291 100295 100299
100276 NANOTTICA 1.5ft NB PC 8000/840 100280 100284 100288 100292 100296 100300

NANOTTICA NB PCc Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

100301 NANOTTICA 1.4ft NB PCc 4400/840 100305 100309 100313 100317 100321 100325
100302 NANOTTICA 1.4ft NB PCc 6400/840 100306 100310 100314 100318 100322 100326
100303 NANOTTICA 1.5ft NB PCc 5500/840 100307 100311 100315 100319 100323 100327
100304 NANOTTICA 1.5ft NB PCc 8000/840 100308 100312 100316 100320 100324 100328

NANOTTICA NB PC DALI Digital dimmable driver DALI - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

100329 NANOTTICA 1.4ft NB PC 4400/840 DALI 100333 100337 100341 100345 100349 100353
100330 NANOTTICA 1.4ft NB PC 6400/840 DALI 100334 100338 100342 100346 100350 100354
100331 NANOTTICA 1.5ft NB PC 5500/840 DALI 100335 100339 100343 100347 100351 100355
100332 NANOTTICA 1.5ft NB PC 8000/840 DALI 100336 100340 100344 100348 100352 100356

NANOTTICA NB PCc DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

100357 NANOTTICA 1.4ft NB PCc 4400/840 DALI 100361 100365 100369 100373 100377 100381
100358 NANOTTICA 1.4ft NB PCc 6400/840 DALI 100362 100366 100370 100374 100378 100382
100359 NANOTTICA 1.5ft NB PCc 5500/840 DALI 100363 100367 100371 100375 100379 100383
100360 NANOTTICA 1.5ft NB PCc 8000/840 DALI 100364 100368 100372 100376 100380 100384

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

CZECH LIGHT FITTINGS 29

 NANOTTICA NB PC, PCc

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) To be attached to a track lighting system with a width of 60 mm using stainless steel snap-in mounting clips
d) Attachment with the use of side hangers to the wall

VARIABLE INSTALLATION PITCH

NANOTTICA NB PC

MAXIMUM

MINIMUM

LIGHT FITTING DETAILED VIEW

NANOTTICA NB PC

30
 NANOTTICA WB

… ceiling height from 2.5 to 4 m, impact resistant.

USE ADVANTAGES
The fixture boasts a low unified glare rating with • Patented optics ensures absolute control • Multipurpose snap-in mounting clips – easy
UGR values its patented nanooptics. This ensures over light beam distribution attachment to a track lighting system with a
eye comfort, high visual performance and work- • Wide Beam angle (WB), optimum luminaire width of 60 mm
place safety, which indirectly translates into higher installation height from 2.5 to 4 m • Optional throughwiring (up to 7 wires inside
productivity.
• Low UGR ranging from 20.5 to 25 the light fitting)
The fitting is highly recommended for illumination • Light fitting protection IP66 / IP69 • Standard model CRI > 80: 4000 K
of premises where workers’ visual precision is of • High temperature resistance in a range from • On request CRI > 80: 3000 K, 5000 K, 6500 K
paramount importance. These include workshops ta = -25 °C to ta = 50 °C • CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
where fine assembly work is performed as well as • Lifetime: 50 000 hours / L90B10 • Optional delivery in dimmable version
craft workshops and visual inspection areas. • High mechanical resistance IK10 • Certificates: ESČ, ENEC, CB, HACCP
• Variable suspension pitch, optional instal-
The fitting’s wide beam angle makes it a great lation of light fitting even on an existing
choice for premises with an optimum fitting instal-
lation height ranging from 2.5 to 4 m. It is designed
structure on which the original light fittings
for indoor spaces, production plants, multi-storey were suspended
car parks and garages as well as workshops, cor-
ridors, cellars, pedestrian underpasses and un-
derground spaces with low ceilings. IP69-rated and
HACCP-compliant, the fitting’s design also makes it up to up to
suitable for the food industry. LED
50ºC -25ºC

Made of clear polycarbonate, the base and the dif- 220-240 V DALI CRI
L 90
fuser boast high impact and deformation resist- >80 B 10
ance. Emissions in the environment of use may
reduce the usability of the plastics; for more infor-
HACCP
mation see page 325.

32
 NANOTTICA WB PC, PCc

NANOTTICA WB PC, PCc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 / IP69 • Body: grey PC (high mechanical resistance,
• Maximum ambient temperature: ta = 50 °C UV stability)
• Maximum ambient temperature: ta = 0-25 °C • Reflector: steel sheet, white colour (RAL 9003)
for version with emergency back-up M1h, M3h • Multipurpose mounting clips: stainless steel,
• Lifetime: 50 000 hours / L90B10 stainless steel hooks included
• Maximum light fitting efficiency: 160 lm/W • Clips: polyamide + 15 % glass fibre or stain-
• UGR ranging from 20.5 to 25 less steel + polyamide
• Optimum luminaire installation height • Sealing: polyurethane (PUR), foamed body
from 2.5 to 4 m groove
• CRI > 80: 4000 K – standard • Cable glands: screwed PG 13.5
• CRI > 80: 3000 K, 5000 K, 6500 K - on request (standard), or rubber (SBS)
• CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K • Terminal block: screwless and 3-pole (stand-
- on request ard version), or screw terminal
• MacAdam = 3 SDCM • The values stated for power consumption and
• Diffuser: transparent PC with nanooptics luminous flux are in a tolerance of ± 7.5 %
Wide Beam (high mechanical resistance, UV
stability)

NANOTTICA 1.5ft WB
150° 180° 150°

A UGR EVALUATED FOR

120° 120°
D
98 X = 4 H, Y = 8 H S = 0.25 H
variable mounting pitch
90° 90°

Reflectivity 70/50/20

84
79
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System UGR Net
A D
Type temperature of LED modules of light fitting consumption efficacy Longitudinal/ weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] transverse [kg]
Up to ambient temperature ta = 50 °C - body: grey polycarbonate - diffusor with nanooptics WB (wide beam angle), transparent polycarbonate
NANOTTICA 1.4ft WB PC 2600/840 50 2580 2400 16 150 21.9 / 20.5 1,7 1175 700 - 960
NANOTTICA 1.4ft WB PC 3200/840 50 3110 2890 20 145 22.5 / 21.2 1,7 1175 700 - 960
NANOTTICA 1.4ft WB PC 4400/840 45 4350 4050 27 150 23.7 / 22.3 1,7 1175 700 - 960
NANOTTICA 1.4ft WB PC 6400/840 45 6260 5820 38 153 24.9 / 23.6 1,7 1175 700 - 960
NANOTTICA 1.5ft WB PC 3250/840 50 3240 3010 20 151 21.9 / 20.6 2,0 1455 970 - 1230
NANOTTICA 1.5ft WB PC 4000/840 50 3880 3610 24 150 22.6 / 21.2 2,0 1455 970 - 1230
NANOTTICA 1.5ft WB PC 5500/840 45 5420 5040 33 153 23.7 / 22.4 2,0 1455 970 - 1230
NANOTTICA 1.5ft WB PC 8000/840 45 7740 7200 45 160 25.0 / 23.6 2,0 1455 970 - 1230

NANOTTICA WB PC Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

100385 NANOTTICA 1.4ft WB PC 2600/840 100393 100401 100409 100417 100425 100433
100386 NANOTTICA 1.4ft WB PC 3200/840 100394 100402 100410 100418 100426 100434
100387 NANOTTICA 1.4ft WB PC 4400/840 100395 100403 100411 100419 100427 100435
100388 NANOTTICA 1.4ft WB PC 6400/840 100396 100404 100412 100420 100428 100436
100389 NANOTTICA 1.5ft WB PC 3250/840 100397 100405 100413 100421 100429 100437
100390 NANOTTICA 1.5ft WB PC 4000/840 100398 100406 100414 100422 100430 100438
100391 NANOTTICA 1.5ft WB PC 5500/840 100399 100407 100415 100423 100431 100439
100392 NANOTTICA 1.5ft WB PC 8000/840 100400 100408 100416 100424 100432 100440

NANOTTICA WB PCc Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

100441 NANOTTICA 1.4ft WB PCc 2600/840 100449 100457 100465 100473 100481 100489
100442 NANOTTICA 1.4ft WB PCc 3200/840 100450 100458 100466 100474 100482 100490
100443 NANOTTICA 1.4ft WB PCc 4400/840 100451 100459 100467 100475 100483 100491
100444 NANOTTICA 1.4ft WB PCc 6400/840 100452 100460 100468 100476 100484 100492
100445 NANOTTICA 1.5ft WB PCc 3250/840 100453 100461 100469 100477 100485 100493
100446 NANOTTICA 1.5ft WB PCc 4000/840 100454 100462 100470 100478 100486 100494
100447 NANOTTICA 1.5ft WB PCc 5500/840 100455 100463 100471 100479 100487 100495
100448 NANOTTICA 1.5ft WB PCc 8000/840 100456 100464 100472 100480 100488 100496

CZECH LIGHT FITTINGS 33

 NANOTTICA WB PC, PCc

NANOTTICA WB PC DALI Digital dimmable driver DALI - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

100497 NANOTTICA 1.4ft WB PC 2600/840 DALI 100505 100513 100521 100529 100537 100545
100498 NANOTTICA 1.4ft WB PC 3200/840 DALI 100506 100514 100522 100530 100538 100546
100499 NANOTTICA 1.4ft WB PC 4400/840 DALI 100507 100515 100523 100531 100539 100547
100500 NANOTTICA 1.4ft WB PC 6400/840 DALI 100508 100516 100524 100532 100540 100548
100501 NANOTTICA 1.5ft WB PC 3250/840 DALI 100509 100517 100525 100533 100541 100549
100502 NANOTTICA 1.5ft WB PC 4000/840 DALI 100510 100518 100526 100534 100542 100550
100503 NANOTTICA 1.5ft WB PC 5500/840 DALI 100511 100519 100527 100535 100543 100551
100504 NANOTTICA 1.5ft WB PC 8000/840 DALI 100512 100520 100528 100536 100544 100552

NANOTTICA WB PCc DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

100553 NANOTTICA 1.4ft WB PCc 2600/840 DALI 100561 100569 100577 100585 100593 100601
100554 NANOTTICA 1.4ft WB PCc 3200/840 DALI 100562 100570 100578 100586 100594 100602
100555 NANOTTICA 1.4ft WB PCc 4400/840 DALI 100563 100571 100579 100587 100595 100603
100556 NANOTTICA 1.4ft WB PCc 6400/840 DALI 100564 100572 100580 100588 100596 100604
100557 NANOTTICA 1.5ft WB PCc 3250/840 DALI 100565 100573 100581 100589 100597 100605
100558 NANOTTICA 1.5ft WB PCc 4000/840 DALI 100566 100574 100582 100590 100598 100606
100559 NANOTTICA 1.5ft WB PCc 5500/840 DALI 100567 100575 100583 100591 100599 100607
100560 NANOTTICA 1.5ft WB PCc 8000/840 DALI 100568 100576 100584 100592 100600 100608

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

34
 NANOTTICA WB PC, PCc

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) To be attached to a track lighting system with a width of 60 mm using stainless steel snap-in mounting clips
d) Attachment with the use of side hangers to the wall

VARIABLE INSTALLATION PITCH

NANOTTICA WB PC

MAXIMUM

MINIMUM

LIGHT FITTING DETAILED VIEW

NANOTTICA WB PC

CZECH LIGHT FITTINGS 35

 NANOTTICA ES ABS

… energy saver, exceptional efficiency,

ceiling height from 3.5 to 8 m, chemically resistant.
USE ADVANTAGES
Compared to its basic version, Nanottica ES ABS • Maximum light fitting efficiency: 157 lm/W width of 60 mm
boasts lower energy consumption, which trans- • Patented optics ensures absolute control • Optional throughwiring (up to 7 wires inside
lates into considerably higher luminous efficacy over light beam distribution the light fitting)
(lm/W).
• Low UGR ranging from 18.9 to 23.3 • Standard model CRI > 80: 4000 K
The fitting is highly recommended for illumination • Light fitting protection IP66 / IP69 • On request CRI > 80: 3000 K, 5000 K, 6500 K
of premises where workers’ visual precision is of • High temperature resistance in a range from • CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
paramount importance. These include workshops ta = -25 °C to ta = 50 °C • Optional delivery in dimmable version
where fine assembly work is performed as well as • Lifetime: 50 000 hours / L90B10 • Certificates: ESČ, ENEC, CB, DLG, HACCP
craft workshops and visual inspection areas. • High chemical resistance
• Variable suspension pitch, optional instal-
The fitting’s standard beam angle makes it a great
choice for premises with a fitting installation height lation of light fitting even on an existing
of 3.5 to 8 m. In addition to indoor spaces, it is de- structure on which the original light fittings
signed for agricultural buildings and other spaces were suspended
with chemically aggressive environments due to • Multipurpose snap-in mounting clips – easy
ammonia fumes, lye fumes, alkali and hot water (hy- attachment to a track lighting system with a
drolysis). The fitting is primarily intended for large
agricultural premises and industrial halls such as
farms, stables, production plants and warehouses,
car washes and laboratories with no explosion haz-
ard. IP69-rated and HACCP-compliant, the fitting’s up to up to

design also makes it suitable for the food industry. LED

50ºC -25ºC

The fitting´s base is made of ABS and diffuser of AC, 220-240 V DALI CRI
L 90
resulting in their exceptional chemical resistance. >80 B 10
Emissions in the environment of use may reduce the
usability of the plastics; for more information see HACCP
page 325.

36
 NANOTTICA ES ABS, ABSc

NANOTTICA ES ABS, ABSc

TECHNICKÝ POPIS
• Light fitting protection: IP66 / IP69 • Body: dark grey ABS (high chemical resist-
• Maximum ambient temperature: ta = 50 °C ance, UV stability)
• Maximum ambient temperature: ta = 0-25 °C • Reflector: steel sheet, white colour (RAL 9003)
for version with emergency back-up M1h, M3h • Multipurpose mounting clips: stainless steel,
• Lifetime: 50 000 hours / L90B10 stainless steel hooks included
• Maximum light fitting efficiency: 157 lm/W • Clips: polyamide + 15 % glass fibre or stain-
• UGR ranging from 18.9 to 23.3 less steel + polyamide
• Optimum luminaire installation height • Sealing: polyurethane (PUR), foamed body
from 3.5 to 8 m groove
• CRI > 80: 4000 K – standard • Cable glands: screwed PG 13.5
• CRI > 80: 3000 K, 5000 K, 6500 K - on request (standard), or rubber (SBS)
• CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K • Terminal block: screwless, three-pole (basic
- on request version), or screwed
• MacAdam = 3 SDCM • The values stated for power consumption and
• Diffuser: transparent AC with nanooptics luminous flux are in a tolerance of ± 7.5 %
(high chemical resistance, UV stability)

NANOTTICA 1.5ft ES ABS

150° 180° 150°

A UGR STANOVENO PRO

120° 120°
D
98 X = 4 H, Y = 8 H S = 0.25 H
variable mounting pitch
90° 90°

Odraznost 70/50/20

84
79
C0 60° 60°

C90
30° 0° 30°

Max, ambient Luminous flux Luminous flux Power System UGR Net
A D
Type temperature of LED modules of light fitting consumption efficacy Longitudinal/ weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] transverse [kg]
Up to ambient temperature ta = 50 °C - body dark grey ABS - diffusor with nanooptics (standard beam angle), transparent acrylate
NANOTTICA 1.2ft ES ABS 1300/840 50 1330 1170 8 146 18.9 / 19.9 0,9 615 110 - 370
NANOTTICA 1.2ft ES ABS 1600/840 50 1620 1430 10 143 19.6 / 20.6 0,9 615 110 - 370
NANOTTICA 1.2ft ES ABS 2200/840 45 2230 1960 14 140 20.7 / 21.7 0,9 615 110 - 370
NANOTTICA 1.4ft ES ABS 2600/840 50 2630 2310 16 144 19.0 / 20.1 1,7 1175 700 - 960
NANOTTICA 1.4ft ES ABS 3200/840 50 3180 2800 20 140 19.8 / 20.9 1,7 1175 700 - 960
NANOTTICA 1.4ft ES ABS 4400/840 45 4450 3920 27 145 20.9 / 22.0 1,7 1175 700 - 960
NANOTTICA 1.4ft ES ABS 6400/840 45 6310 5550 38 146 22.2 / 23.3 1,7 1175 700 - 960
NANOTTICA 1.5ft ES ABS 3250/840 50 3290 2900 20 145 19.1 / 20.2 2,0 1455 970 - 1230
NANOTTICA 1.5ft ES ABS 4000/840 50 4050 3560 24 148 19.8 / 20.9 2,0 1455 970 - 1230
NANOTTICA 1.5ft ES ABS 5500/840 45 5560 4890 33 148 20.9 / 22.0 2,0 1455 970 - 1230
NANOTTICA 1.5ft ES ABS 8000/840 45 8020 7060 45 157 22.2 / 23.3 2,0 1455 970 - 1230

NANOTTICA ES ABS Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

102822 NANOTTICA 1.2ft ES ABS 1300/840 102833 102844 102855 x x x
102823 NANOTTICA 1.2ft ES ABS 1600/840 102834 102845 102856 x x x
102824 NANOTTICA 1.2ft ES ABS 2200/840 102835 102846 102857 x x x
102825 NANOTTICA 1.4ft ES ABS 2600/840 102836 102847 102858 102866 102874 102882
102826 NANOTTICA 1.4ft ES ABS 3200/840 102837 102848 102859 102867 102875 102883
102827 NANOTTICA 1.4ft ES ABS 4400/840 102838 102849 102860 102868 102876 102884
102828 NANOTTICA 1.4ft ES ABS 6400/840 102839 102850 102861 102869 102877 102885
102829 NANOTTICA 1.5ft ES ABS 3250/840 102840 102851 102862 102870 102878 102886
102830 NANOTTICA 1.5ft ES ABS 4000/840 102841 102852 102863 102871 102879 102887
102831 NANOTTICA 1.5ft ES ABS 5500/840 102842 102853 102864 102872 102880 102888
102832 NANOTTICA 1.5ft ES ABS 8000/840 102843 102854 102865 102873 102881 102889

NANOTTICA ES ABSc Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

102890 NANOTTICA 1.2ft ES ABSc 1300/840 102901 102912 102923 x x x
102891 NANOTTICA 1.2ft ES ABSc 1600/840 102902 102913 102924 x x x
102892 NANOTTICA 1.2ft ES ABSc 2200/840 102903 102914 102925 x x x
102893 NANOTTICA 1.4ft ES ABSc 2600/840 102904 102915 102926 102934 102942 102950
102894 NANOTTICA 1.4ft ES ABSc 3200/840 102905 102916 102927 102935 102943 102951
102895 NANOTTICA 1.4ft ES ABSc 4400/840 102906 102917 102928 102936 102944 102952
102896 NANOTTICA 1.4ft ES ABSc 6400/840 102907 102918 102929 102937 102945 102953
102897 NANOTTICA 1.5ft ES ABSc 3250/840 102908 102919 102930 102938 102946 102954
102898 NANOTTICA 1.5ft ES ABSc 4000/840 102909 102920 102931 102939 102947 102955
102899 NANOTTICA 1.5ft ES ABSc 5500/840 102910 102921 102932 102940 102948 102956
102900 NANOTTICA 1.5ft ES ABSc 8000/840 102911 102922 102933 102941 102949 102957

CZECH LIGHT FITTINGS 37

 NANOTTICA ES ABS, ABSc

NANOTTICA ES ABS DALI Digital dimmable driver DALI - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

102958 NANOTTICA 1.2ft ES ABS 1300/840 DALI 102969 x 102991 x x x
102959 NANOTTICA 1.2ft ES ABS 1600/840 DALI 102970 x 102992 x x x
102960 NANOTTICA 1.2ft ES ABS 2200/840 DALI 102971 x 102993 x x x
102961 NANOTTICA 1.4ft ES ABS 2600/840 DALI 102972 102983 102994 103002 103010 103018
102962 NANOTTICA 1.4ft ES ABS 3200/840 DALI 102973 102984 102995 103003 103011 103019
102963 NANOTTICA 1.4ft ES ABS 4400/840 DALI 102974 102985 102996 103004 103012 103020
102964 NANOTTICA 1.4ft ES ABS 6400/840 DALI 102975 102986 102997 103005 103013 103021
102965 NANOTTICA 1.5ft ES ABS 3250/840 DALI 102976 102987 102998 103006 103014 103022
102966 NANOTTICA 1.5ft ES ABS 4000/840 DALI 102977 102988 102999 103007 103015 103023
102967 NANOTTICA 1.5ft ES ABS 5500/840 DALI 102978 102989 103000 103008 103016 103024
102968 NANOTTICA 1.5ft ES ABS 8000/840 DALI 102979 102990 103001 103009 103017 103025

NANOTTICA ES ABSc DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

103026 NANOTTICA 1.2ft ES ABSc 1300/840 DALI 103037 x 103059 x x x
103027 NANOTTICA 1.2ft ES ABSc 1600/840 DALI 103038 x 103060 x x x
103028 NANOTTICA 1.2ft ES ABSc 2200/840 DALI 103039 x 103061 x x x
103029 NANOTTICA 1.4ft ES ABSc 2600/840 DALI 103040 103051 103062 103070 103078 103086
103030 NANOTTICA 1.4ft ES ABSc 3200/840 DALI 103041 103052 103063 103071 103079 103087
103031 NANOTTICA 1.4ft ES ABSc 4400/840 DALI 103042 103053 103064 103072 103080 103088
103032 NANOTTICA 1.4ft ES ABSc 6400/840 DALI 103043 103054 103065 103073 103081 103089
103033 NANOTTICA 1.5ft ES ABSc 3250/840 DALI 103044 103055 103066 103074 103082 103090
103034 NANOTTICA 1.5ft ES ABSc 4000/840 DALI 103045 103056 103067 103075 103083 103091
103035 NANOTTICA 1.5ft ES ABSc 5500/840 DALI 103046 103057 103068 103076 103084 103092
103036 NANOTTICA 1.5ft ES ABSc 8000/840 DALI 103047 103058 103069 103077 103085 103093

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

38
 NANOTTICA ES ABS, ABSc

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) To be attached to a track lighting system with a width of 60 mm using stainless steel snap-in mounting clips
d) Attachment with the use of side hangers to the wall

VARIABLE INSTALLATION PITCH

NANOTTICA ES ABS

MAXIMUM

MINIMUM

LIGHT FITTING DETAILED VIEW

NANOTTICA ES ABS

CZECH LIGHT FITTINGS 39

 NANOTTICA ABS

… ceiling height from 3.5 to 8 m, chemically resistant.

USE ADVANTAGES
The fixture boasts a low unified glare rating with • Patented optics ensures absolute control • Optional throughwiring (up to 7 wires inside
UGR values its patented nanooptics. This ensures over light beam distribution the light fitting)
eye comfort, high visual performance and work- • Low UGR ranging from 18.9 to 23.2 • Standard model CRI > 80: 4000 K
place safety, which indirectly translates into higher
• Light fitting protection IP66 / IP69 • On request CRI > 80: 3000 K, 5000 K, 6500 K
productivity.
• High temperature resistance in a range from • CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
The fitting is highly recommended for illumination ta = -25 °C to ta = 50 °C • Optional delivery in dimmable version
of premises where workers’ visual precision is of • Lifetime: 50 000 hours / L90B10 • Certificates: ESČ, ENEC, CB, DLG, HACCP
paramount importance. These include workshops • High chemical resistance
where fine assembly work is performed as well as • Variable suspension pitch, optional instal-
craft workshops and visual inspection areas. lation of light fitting even on an existing
The fitting’s standard beam angle makes it a great structure on which the original light fittings
choice for premises with a fitting installation height were suspended
of 3.5 to 8 m. In addition to indoor spaces, it is de- • Multipurpose snap-in mounting clips – easy
signed for agricultural buildings and other spaces attachment to a track lighting system with a
with chemically aggressive environments due to width of 60 mm
ammonia fumes, lye fumes, alkali and hot water (hy-
drolysis). The fitting is primarily intended for large
agricultural premises and industrial halls such as
farms, stables, production plants and warehouses,
car washes and laboratories with no explosion haz-
ard. IP69-rated and HACCP-compliant, the fitting’s up to up to

design also makes it suitable for the food industry. LED

50ºC -25ºC

The fitting´s base is made of ABS and diffuser of AC, 220-240 V DALI CRI
L 90
resulting in their exceptional chemical resistance. >80 B 10
Emissions in the environment of use may reduce the
usability of the plastics; for more information see HACCP
page 325.

40
 NANOTTICA ABS, ABSc

NANOTTICA ABS ABSc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 / IP69 • Body: dark grey ABS (high chemical resist-
• Maximum ambient temperature: ta = 50 °C ance, UV stability)
• Maximum ambient temperature: ta = 0-25 °C • Reflector: steel sheet, white colour (RAL 9003)
for version with emergency back-up M1h, M3h • Multipurpose mounting clips: stainless steel,
• Lifetime: 50 000 hours / L90B10 stainless steel hooks included
• Maximum light fitting efficiency: 151 lm/W • Clips: polyamide + 15 % glass fibre or stain-
• UGR ranging from 18.9 to 23.2 less steel + polyamide
• Optimum luminaire installation height • Sealing: polyurethane (PUR), foamed body
from 3.5 to 8 m groove
• CRI > 80: 4000 K – standard • Cable glands: screwed PG 13.5
• CRI > 80: 3000 K, 5000 K, 6500 K - on request (standard), or rubber (SBS)
• CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K • Terminal block: screwless, three-pole (basic
- on request version), or screwed
• MacAdam = 3 SDCM • The values stated for power consumption and
• Diffuser: transparent AC with nanooptics luminous flux are in a tolerance of ± 7.5 %
(high chemical resistance, UV stability)

NANOTTICA 1.5ft ABS

150° 180° 150°

A UGR EVALUATED FOR

120° 120°
D
98 X = 4 H, Y = 8 H S = 0.25 H
variable mounting pitch
90° 90°

Reflectivity 70/50/20

84
79
C0 60° 60°

C90
30° 0° 30°

Max, ambient Luminous flux Luminous flux Power System UGR Net
A D
Type temperature of LED modules of light fitting consumption efficacy Longitudinal/ weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] transverse [kg]
Up to ambient temperature ta = 50 °C - body dark grey ABS - diffusor with nanooptics (standard beam angle), transparent acrylate
NANOTTICA 1.2ft ABS 1300/840 50 1320 1160 8 145 18.9 / 19.8 0,9 615 110 - 370
NANOTTICA 1.2ft ABS 1600/840 50 1580 1390 10 139 19.5 / 20.5 0,9 615 110 - 370
NANOTTICA 1.2ft ABS 2200/840 45 2200 1940 14 139 20.6 / 21.6 0,9 615 110 - 370
NANOTTICA 1.4ft ABS 2600/840 50 2580 2270 16 142 19.0 / 20.1 1,7 1175 700 - 960
NANOTTICA 1.4ft ABS 3200/840 50 3110 2740 20 137 19.6 / 20.7 1,7 1175 700 - 960
NANOTTICA 1.4ft ABS 4400/840 45 4350 3830 27 142 20.8 / 21.9 1,7 1175 700 - 960
NANOTTICA 1.4ft ABS 6400/840 45 6260 5510 38 145 22.1 / 23.1 1,7 1175 700 - 960
NANOTTICA 1.5ft ABS 3250/840 50 3240 2850 20 143 19.0 / 20.1 2,0 1455 970 - 1230
NANOTTICA 1.5ft ABS 4000/840 50 3880 3410 24 142 19.7 / 20.8 2,0 1455 970 - 1230
NANOTTICA 1.5ft ABS 5500/840 45 5420 4770 33 145 20.8 / 21.9 2,0 1455 970 - 1230
NANOTTICA 1.5ft ABS 8000/840 45 7740 6810 45 151 22.1 / 23.2 2,0 1455 970 - 1230

NANOTTICA ABS Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

100609 NANOTTICA 1.2ft ABS 1300/840 100620 100631 100642 x x x
100610 NANOTTICA 1.2ft ABS 1600/840 100621 100632 100643 x x x
100611 NANOTTICA 1.2ft ABS 2200/840 100622 100633 100644 x x x
100612 NANOTTICA 1.4ft ABS 2600/840 100623 100634 100645 100653 100661 100669
100613 NANOTTICA 1.4ft ABS 3200/840 100624 100635 100646 100654 100662 100670
100614 NANOTTICA 1.4ft ABS 4400/840 100625 100636 100647 100655 100663 100671
100615 NANOTTICA 1.4ft ABS 6400/840 100626 100637 100648 100656 100664 100672
100616 NANOTTICA 1.5ft ABS 3250/840 100627 100638 100649 100657 100665 100673
100617 NANOTTICA 1.5ft ABS 4000/840 100628 100639 100650 100658 100666 100674
100618 NANOTTICA 1.5ft ABS 5500/840 100629 100640 100651 100659 100667 100675
100619 NANOTTICA 1.5ft ABS 8000/840 100630 100641 100652 100660 100668 100676

NANOTTICA ABSc Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

100677 NANOTTICA 1.2ft ABSc 1300/840 100688 100699 100710 x x x
100678 NANOTTICA 1.2ft ABSc 1600/840 100689 100700 100711 x x x
100679 NANOTTICA 1.2ft ABSc 2200/840 100690 100701 100712 x x x
100680 NANOTTICA 1.4ft ABSc 2600/840 100691 100702 100713 100721 100729 100737
100681 NANOTTICA 1.4ft ABSc 3200/840 100692 100703 100714 100722 100730 100738
100682 NANOTTICA 1.4ft ABSc 4400/840 100693 100704 100715 100723 100731 100739
100683 NANOTTICA 1.4ft ABSc 6400/840 100694 100705 100716 100724 100732 100740
100684 NANOTTICA 1.5ft ABSc 3250/840 100695 100706 100717 100725 100733 100741
100685 NANOTTICA 1.5ft ABSc 4000/840 100696 100707 100718 100726 100734 100742
100686 NANOTTICA 1.5ft ABSc 5500/840 100697 100708 100719 100727 100735 100743
100687 NANOTTICA 1.5ft ABSc 8000/840 100698 100709 100720 100728 100736 100744

CZECH LIGHT FITTINGS 41

 NANOTTICA ABS, ABSc

NANOTTICA ABS DALI Digital dimmable driver DALI - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

100745 NANOTTICA 1.2ft ABS 1300/840 DALI 100756 x 100778 x x x
100746 NANOTTICA 1.2ft ABS 1600/840 DALI 100757 x 100779 x x x
100747 NANOTTICA 1.2ft ABS 2200/840 DALI 100758 x 100780 x x x
100748 NANOTTICA 1.4ft ABS 2600/840 DALI 100759 100770 100781 100789 100797 100805
100749 NANOTTICA 1.4ft ABS 3200/840 DALI 100760 100771 100782 100790 100798 100806
100750 NANOTTICA 1.4ft ABS 4400/840 DALI 100761 100772 100783 100791 100799 100807
100751 NANOTTICA 1.4ft ABS 6400/840 DALI 100762 100773 100784 100792 100800 100808
100752 NANOTTICA 1.5ft ABS 3250/840 DALI 100763 100774 100785 100793 100801 100809
100753 NANOTTICA 1.5ft ABS 4000/840 DALI 100764 100775 100786 100794 100802 100810
100754 NANOTTICA 1.5ft ABS 5500/840 DALI 100765 100776 100787 100795 100803 100811
100755 NANOTTICA 1.5ft ABS 8000/840 DALI 100766 100777 100788 100796 100804 100812

NANOTTICA ABSc DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

100813 NANOTTICA 1.2ft ABSc 1300/840 DALI 100824 x 100846 x x x
100814 NANOTTICA 1.2ft ABSc 1600/840 DALI 100825 x 100847 x x x
100815 NANOTTICA 1.2ft ABSc 2200/840 DALI 100826 x 100848 x x x
100816 NANOTTICA 1.4ft ABSc 2600/840 DALI 100827 100838 100849 100857 100865 100873
100817 NANOTTICA 1.4ft ABSc 3200/840 DALI 100828 100839 100850 100858 100866 100874
100818 NANOTTICA 1.4ft ABSc 4400/840 DALI 100829 100840 100851 100859 100867 100875
100819 NANOTTICA 1.4ft ABSc 6400/840 DALI 100830 100841 100852 100860 100868 100876
100820 NANOTTICA 1.5ft ABSc 3250/840 DALI 100831 100842 100853 100861 100869 100877
100821 NANOTTICA 1.5ft ABSc 4000/840 DALI 100832 100843 100854 100862 100870 100878
100822 NANOTTICA 1.5ft ABSc 5500/840 DALI 100833 100844 100855 100863 100871 100879
100823 NANOTTICA 1.5ft ABSc 8000/840 DALI 100834 100845 100856 100864 100872 100880

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

42
 NANOTTICA ABS, ABSc

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) To be attached to a track lighting system with a width of 60 mm using stainless steel snap-in mounting clips
d) Attachment with the use of side hangers to the wall

VARIABLE INSTALLATION PITCH

NANOTTICA ABS

MAXIMUM

MINIMUM

LIGHT FITTING DETAILED VIEW

NANOTTICA ABS

CZECH LIGHT FITTINGS 43

 NANOTTICA NB ABS

… ceiling height from 7.5 to 12 m, chemically resistant.

USE ADVANTAGES
The fixture boasts a low unified glare rating with • Patented optics ensures absolute control • Multipurpose snap-in mounting clips – easy
UGR values its patented nanooptics. This ensures over light beam distribution attachment to a track lighting system with a
eye comfort, high visual performance and work- • Narrow Beam angle (NB), optimum luminaire width of 60 mm
place safety, which indirectly translates into higher installation height from 7.5 to 12 m • Optional throughwiring (up to 7 wires inside
productivity. • Low UGR ranging from 21.5 to 24.8 the light fitting)
• Light fitting protection IP66 / IP69 • Standard model CRI > 80: 4000 K
The luminaire’s narrow-beam angle makes it suit-
• High temperature resistance in a range from • On request CRI > 80: 3000 K, 5000 K, 6500 K
able for premises with an optimum luminaire in-
ta = -25 °C to ta = 45 °C • CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
stallation height of 7.5 to 12 m. The luminaire is
designed for indoor spaces as well as for agricul- • Lifetime: 50 000 hours / L90B10 • Optional delivery in dimmable version
tural buildings and other spaces with chemically ag- • High chemical resistance • Certificates: ESČ, ENEC, CB, DLG, HACCP
gressive environments due to ammonia fumes, lye • Variable suspension pitch, optional instal-
fumes, alkali and hot water (hydrolysis). The fitting is lation of light fitting even on an existing
primarily intended for walls and large corridors in structure on which the original light fittings
high industrial and agricultural buildings, produc- were suspended
tion plants and warehouse aisles, farms, stables
and laboratories with no explosion hazard. IP69-
rated and HACCP-compliant, the fitting’s design
also makes it suitable for the food industry. up to up to
LED
The fitting´s base is made of ABS and diffuser of AC, 45ºC -25ºC

resulting in their exceptional chemical resistance. 220-240 V DALI CRI

L 90
Emissions in the environment of use may reduce the >80 B 10
usability of the plastics; for more information see
page 325. HACCP

44
 NANOTTICA NB ABS, ABSc

NANOTTICA NB ABS, ABSc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 / IP69 • Body: dark grey ABS (high chemical resist-
• Maximum ambient temperature: ta = 45 °C ance, UV stability)
• Maximum ambient temperature: ta = 0-25 °C • Reflector: steel sheet, white colour (RAL 9003)
for version with emergency back-up M1h, M3h • Multipurpose mounting clips: stainless steel,
• Lifetime: 50 000 hours / L90B10 stainless steel hooks included
• Maximum light fitting efficiency: 150 lm/W • Clips: polyamide + 15 % glass fibre or stain-
• UGR ranging from 21.5 to 24.8 less steel + polyamide
• Optimum luminaire installation height • Sealing: polyurethane (PUR), foamed body
from 7.5 to 12 m groove
• CRI > 80: 4000 K – standard • Cable glands: screwed PG 13.5
• CRI > 80: 3000 K, 5000 K, 6500 K - on request (standard), or rubber (SBS)
• CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K • Terminal block: screwless, three-pole (basic
- on request version), or screwed
• MacAdam = 3 SDCM • The values stated for power consumption and
• Diffuser: transparent AC with nanooptics luminous flux are in a tolerance of ± 7.5 %
Narrow Beam (high chemical resistance, UV
stability)

NANOTTICA 1.5ft NB ABS

150° 180° 150°

A UGR EVALUATED FOR

120° 120°
D
98 X = 4 H, Y = 8 H S = 0.25 H
variable mounting pitch
90° 90°

Reflectivity 70/50/20

84
79
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System UGR Net
A D
Type temperature of LED modules of light fitting consumption efficacy Longitudinal/ weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] transverse [kg]
Up to ambient temperature ta = 45 °C - body dark grey ABS - diffusor with nanooptics NB (narrow beam angle), transparent acrylate
NANOTTICA 1.4ft NB ABS 4400/840 45 4350 3780 27 140 23.6 / 21.5 1,7 1175 700 - 960
NANOTTICA 1.4ft NB ABS 6400/840 45 6260 5450 38 143 24.8 / 22.7 1,7 1175 700 - 960
NANOTTICA 1.5ft NB ABS 5500/840 45 5420 4720 33 143 23.6 / 21.5 2,0 1455 970 - 1230
NANOTTICA 1.5ft NB ABS 8000/840 45 7740 6730 45 150 24.8 / 22.8 2,0 1455 970 - 1230

NANOTTICA NB ABS Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

100881 NANOTTICA 1.4ft NB ABS 4400/840 100885 100889 100893 100897 100901 100905
100882 NANOTTICA 1.4ft NB ABS 6400/840 100886 100890 100894 100898 100902 100906
100883 NANOTTICA 1.5ft NB ABS 5500/840 100887 100891 100895 100899 100903 100907
100884 NANOTTICA 1.5ft NB ABS 8000/840 100888 100892 100896 100900 100904 100908

NANOTTICA NB ABSc Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

100909 NANOTTICA 1.4ft NB ABSc 4400/840 100913 100917 100921 100925 100929 100933
100910 NANOTTICA 1.4ft NB ABSc 6400/840 100914 100918 100922 100926 100930 100934
100911 NANOTTICA 1.5ft NB ABSc 5500/840 100915 100919 100923 100927 100931 100935
100912 NANOTTICA 1.5ft NB ABSc 8000/840 100916 100920 100924 100928 100932 100936

NANOTTICA NB ABS DALI Digital dimmable driver DALI - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

100937 NANOTTICA 1.4ft NB ABS 4400/840 DALI 100941 100945 100949 100953 100957 100961
100938 NANOTTICA 1.4ft NB ABS 6400/840 DALI 100942 100946 100950 100954 100958 100962
100939 NANOTTICA 1.5ft NB ABS 5500/840 DALI 100943 100947 100951 100955 100959 100963
100940 NANOTTICA 1.5ft NB ABS 8000/840 DALI 100944 100948 100952 100956 100960 100964

NANOTTICA NB ABSc DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

100965 NANOTTICA 1.4ft NB ABSc 4400/840 DALI 100969 100973 100977 100981 100985 100989
100966 NANOTTICA 1.4ft NB ABSc 6400/840 DALI 100970 100974 100978 100982 100986 100990
100967 NANOTTICA 1.5ft NB ABSc 5500/840 DALI 100971 100975 100979 100983 100987 100991
100968 NANOTTICA 1.5ft NB ABSc 8000/840 DALI 100972 100976 100980 100984 100988 100992

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

CZECH LIGHT FITTINGS 45

 NANOTTICA NB ABS, ABSc

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) To be attached to a track lighting system with a width of 60 mm using stainless steel snap-in mounting clips
d) Attachment with the use of side hangers to the wall

VARIABLE INSTALLATION PITCH

NANOTTICA NB ABS

MAXIMUM

MINIMUM

LIGHT FITTING DETAILED VIEW

NANOTTICA NB ABS

46
 NANOTTICA WB ABS

… ceiling height from 2.5 to 4 m, chemically resistant.

USE ADVANTAGES
The fixture boasts a low unified glare rating with • Patented optics ensures absolute control • Multipurpose snap-in mounting clips – easy
UGR values its patented nanooptics. This ensures over light beam distribution attachment to a track lighting system with a
eye comfort, high visual performance and work- • Wide Beam angle (WB), optimum luminaire width of 60 mm
place safety, which indirectly translates into higher
installation height from 2.5 to 4 m • Optional throughwiring (up to 7 wires inside
productivity.
• Low UGR ranging from 20.3 to 24.8 the light fitting)
The fitting is highly recommended for illumination • Light fitting protection IP66 / IP69 • Standard model CRI > 80: 4000 K
of premises where workers’ visual precision is of • High temperature resistance in a range from • On request CRI > 80: 3000 K, 5000 K, 6500 K
paramount importance. These include workshops ta = -25 °C to ta = 50 °C • CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
where fine assembly work is performed as well • Lifetime: 50 000 hours / L90B10 • Optional delivery in dimmable version
as craft workshops and visual inspection areas. • High chemical resistance • Certificates: ESČ, ENEC, CB, DLG, HACCP
Its wide beam angle makes it an excellent choice
for spaces with an optimum luminaire installation • Variable suspension pitch, optional instal-
height ranging from 2.5 to 4 m. It is designed for lation of light fitting even on an existing
indoor spaces as well as for agricultural buildings structure on which the original light fittings
and other spaces with chemically aggressive envi- were suspended
ronments due to ammonia fumes, lye fumes, alkali
and hot water (hydrolysis). The product is primarily
intended for walls and large corridors in low agri-
cultural buildings and industrial halls, workshops,
corridors, cellars, farms, stables and laboratories
with no explosion hazard. IP69-rated and HACCP-
compliant, the fitting’s design also makes it suitable up to up to
for the food industry. LED
50ºC -25ºC

The fitting´s base is made of ABS and diffuser of AC, 220-240 V DALI CRI
L 90
resulting in their exceptional chemical resistance. >80 B 10
Emissions in the environment of use may reduce the
usability of the plastics; for more information see HACCP
page 325.

48
 NANOTTICA WB ABS, ABSc

NANOTTICA WB ABS, ABSc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 / IP69 • Body: dark grey ABS (high chemical resist-
• Maximum ambient temperature: ta = 50 °C ance, UV stability)
• Maximum ambient temperature: ta = 0-25 °C • Reflector: steel sheet, white colour (RAL 9003)
for version with emergency back-up M1h, M3h • Multipurpose mounting clips: stainless steel,
• Lifetime: 50 000 hours / L90B10 stainless steel hooks included
• Maximum light fitting efficiency: 151 lm/W • Clips: polyamide + 15 % glass fibre or stain-
• UGR ranging from 20.3 to 24.8 less steel + polyamide
• Optimum luminaire installation height • Sealing: polyurethane (PUR), foamed body
from 2.5 to 4 m groove
• CRI > 80: 4000 K – standard • Cable glands: screwed PG 13.5
• CRI > 80: 3000 K, 5000 K, 6500 K - on request (standard), or rubber (SBS)
• CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K • Terminal block: screwless, three-pole (basic
- on request version), or screwed
• MacAdam = 3 SDCM • The values stated for power consumption and
• Diffuser: transparent AC with nanooptics luminous flux are in a tolerance of ± 7.5 %
Wide Beam (high chemical resistance, UV
stability)

NANOTTICA 1.5ft WB ABS

150° 180° 150°
A UGR EVALUATED FOR
D 120° 120°
98 X = 4 H, Y = 8 H S = 0.25 H
variable mounting pitch
90° 90°
Reflectivity 70/50/20

84
79
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System UGR Net
A D
Type temperature of LED modules of light fitting consumption efficacy Longitudinal/ weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] transverse [kg]
Up to ambient temperature ta = 50 °C - body dark grey ABS - diffusor with nanooptics WB (wide beam angle), transparent acrylate
NANOTTICA 1.4ft WB ABS 2600/840 50 2580 2270 16 142 21.7 / 20.3 1,7 1175 700 - 960
NANOTTICA 1.4ft WB ABS 3200/840 50 3110 2740 20 137 22.3 / 21.0 1,7 1175 700 - 960
NANOTTICA 1.4ft WB ABS 4400/840 45 4350 3830 27 142 23.5 / 22.1 1,7 1175 700 - 960
NANOTTICA 1.4ft WB ABS 6400/840 45 6260 5510 38 145 24.8 / 23.4 1,7 1175 700 - 960
NANOTTICA 1.5ft WB ABS 3250/840 50 3240 2850 20 143 21.7 / 20.4 2,0 1455 970 - 1230
NANOTTICA 1.5ft WB ABS 4000/840 50 3880 3410 24 142 22.4 / 21.0 2,0 1455 970 - 1230
NANOTTICA 1.5ft WB ABS 5500/840 45 5420 4770 33 145 23.5 / 22.2 2,0 1455 970 - 1230
NANOTTICA 1.5ft WB ABS 8000/840 45 7740 6810 45 151 24.8 / 23.4 2,0 1455 970 - 1230

NANOTTICA WB ABS Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

100993 NANOTTICA 1.4ft WB ABS 2600/840 101001 101009 101017 101025 101033 101041
100994 NANOTTICA 1.4ft WB ABS 3200/840 101002 101010 101018 101026 101034 101042
100995 NANOTTICA 1.4ft WB ABS 4400/840 101003 101011 101019 101027 101035 101043
100996 NANOTTICA 1.4ft WB ABS 6400/840 101004 101012 101020 101028 101036 101044
100997 NANOTTICA 1.5ft WB ABS 3250/840 101005 101013 101021 101029 101037 101045
100998 NANOTTICA 1.5ft WB ABS 4000/840 101006 101014 101022 101030 101038 101046
100999 NANOTTICA 1.5ft WB ABS 5500/840 101007 101015 101023 101031 101039 101047
101000 NANOTTICA 1.5ft WB ABS 8000/840 101008 101016 101024 101032 101040 101048

NANOTTICA WB ABSc Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

101049 NANOTTICA 1.4ft WB ABSc 2600/840 101057 101065 101073 101081 101089 101097
101050 NANOTTICA 1.4ft WB ABSc 3200/840 101058 101066 101074 101082 101090 101098
101051 NANOTTICA 1.4ft WB ABSc 4400/840 101059 101067 101075 101083 101091 101099
101052 NANOTTICA 1.4ft WB ABSc 6400/840 101060 101068 101076 101084 101092 101100
101053 NANOTTICA 1.5ft WB ABSc 3250/840 101061 101069 101077 101085 101093 101101
101054 NANOTTICA 1.5ft WB ABSc 4000/840 101062 101070 101078 101086 101094 101102
101055 NANOTTICA 1.5ft WB ABSc 5500/840 101063 101071 101079 101087 101095 101103
101056 NANOTTICA 1.5ft WB ABSc 8000/840 101064 101072 101080 101088 101096 101104

NANOTTICA WB ABS DALI Digital dimmable driver DALI - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

101105 NANOTTICA 1.4ft WB ABS 2600/840 DALI 101113 101121 101129 101137 101145 101153
101106 NANOTTICA 1.4ft WB ABS 3200/840 DALI 101114 101122 101130 101138 101146 101154
101107 NANOTTICA 1.4ft WB ABS 4400/840 DALI 101115 101123 101131 101139 101147 101155
101108 NANOTTICA 1.4ft WB ABS 6400/840 DALI 101116 101124 101132 101140 101148 101156
101109 NANOTTICA 1.5ft WB ABS 3250/840 DALI 101117 101125 101133 101141 101149 101157
101110 NANOTTICA 1.5ft WB ABS 4000/840 DALI 101118 101126 101134 101142 101150 101158
101111 NANOTTICA 1.5ft WB ABS 5500/840 DALI 101119 101127 101135 101143 101151 101159
101112 NANOTTICA 1.5ft WB ABS 8000/840 DALI 101120 101128 101136 101144 101152 101160

CZECH LIGHT FITTINGS 49

 NANOTTICA WB ABS, ABSc

NANOTTICA WB ABSc DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

101161 NANOTTICA 1.4ft WB ABSc 2600/840 DALI 101169 101177 101185 101193 101201 101209
101162 NANOTTICA 1.4ft WB ABSc 3200/840 DALI 101170 101178 101186 101194 101202 101210
101163 NANOTTICA 1.4ft WB ABSc 4400/840 DALI 101171 101179 101187 101195 101203 101211
101164 NANOTTICA 1.4ft WB ABSc 6400/840 DALI 101172 101180 101188 101196 101204 101212
101165 NANOTTICA 1.5ft WB ABSc 3250/840 DALI 101173 101181 101189 101197 101205 101213
101166 NANOTTICA 1.5ft WB ABSc 4000/840 DALI 101174 101182 101190 101198 101206 101214
101167 NANOTTICA 1.5ft WB ABSc 5500/840 DALI 101175 101183 101191 101199 101207 101215
101168 NANOTTICA 1.5ft WB ABSc 8000/840 DALI 101176 101184 101192 101200 101208 101216

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

50
 NANOTTICA WB ABS, ABSc

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) To be attached to a track lighting system with a width of 60 mm using stainless steel snap-in mounting clips
d) Attachment with the use of side hangers to the wall

VARIABLE INSTALLATION PITCH

NANOTTICA WB ABS

MAXIMUM

MINIMUM

LIGHT FITTING DETAILED VIEW

NANOTTICA WB ABS

CZECH LIGHT FITTINGS 51

 NANOTTICA VP

… for outdoor sheltered spaces, ceiling height from

3.5 to 8 m, impact resistant.
USE ADVANTAGES
The fixture boasts a low unified glare rating with • Patented optics ensures absolute control • Optional throughwiring (up to 7 wires inside
UGR values its patented nanooptics. This ensures over light beam distribution the light fitting)
eye comfort, high visual performance and work- • Low UGR ranging from 19.1 to 23.4 • Standard model CRI > 80: 4000 K
place safety, which indirectly translates into higher
• Light fitting protection IP66 / IP69 • On request CRI > 80: 3000 K, 5000 K, 6500 K
productivity.
• High temperature resistance in a range from • CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
The fitting’s standard beam angle makes it a great ta = -25 °C to ta = 50 °C • Optional delivery in dimmable version
choice for premises with an optimum fitting instal- • Lifetime: 50 000 hours / L90B10 • Certificates: ESČ, ENEC, CB, HACCP
lation height of 3.5 to 8 m. • High mechanical resistance IK10
• Variable suspension pitch, optional instal-
It is intended to be installed in sheltered outdoor lation of light fitting even on an existing
spaces. It features a ventilation membrane that
equalizes pressures while blocking water and structure on which the original light fittings
contaminants that build up inside of the fitting as were suspended
a result of temperature fluctuations. The fixture • Multipurpose snap-in mounting clips – easy
is highly recommended for industrial premises, attachment to a track lighting system with a
warehouses, agricultural buildings, sports facili- width of 60 mm
ties as well as transport hubs, car parks and ga-
rages, workshops and laboratories with no explo-
sion hazard. IP69-rated and HACCP-compliant, the
fitting’s design also makes it a great choice for the up to up to

food industry. LED

50ºC -25ºC

CRI
Made of clear polycarbonate, the base and the dif- 220-240 V DALI L 90
>80
fuser boast high impact and deformation resist- B 10
ance. Emissions in the environment of use may
reduce the usability of the plastics; for more infor- HACCP
mation see page 325.

52
 NANOTTICA VP PC, PCc

NANOTTICA VP PC, PCc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 / IP69 • Body: grey PC (high mechanical resistance,
• Maximum ambient temperature: ta = 50 °C UV stability)
• Maximum ambient temperature: ta = 0-25 °C • A ventilation membrane in the base equalizes
for version with emergency back-up M1h, M3h pressures while blocking water and contaminants
• Lifetime: 50 000 hours / L90B10 • Reflector: steel sheet, white colour (RAL 9003)
• Maximum light fitting efficiency: 162 lm/W • Multipurpose mounting clips: stainless steel,
• UGR ranging from 19.1 to 23.4 stainless steel hooks included
• Optimum luminaire installation height • Clips: polyamide + 15 % glass fibre or stain-
from 3.5 to 8 m less steel + polyamide
• CRI > 80: 4000 K – standard • Sealing: polyurethane (PUR), foamed body
• CRI > 80: 3000 K, 5000 K, 6500 K - on request groove
• CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K • Cable glands: screwed PG 13.5
- on request • Terminal block: screwless, three-pole (basic
• MacAdam = 3 SDCM version), or screwed
• Diffuser: transparent PC with nanooptics • The values stated for power consumption and
(high mechanical resistance, UV stability) luminous flux are in a tolerance of ± 7.5 %

NANOTTICA 1.5ft VP
150° 180° 150°

A UGR EVALUATED FOR

120° 120°
D
98 X = 4 H, Y = 8 H S = 0.25 H
variable mounting pitch
90° 90°

Reflectivity 70/50/20

84
79
C0
60° 60°

C90
30° 0° 30°

Max, ambient Luminous flux Luminous flux Power System UGR Net
A D
Type temperature of LED modules of light fitting consumption efficacy Longitudinal/ weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] transverse [kg]
Up to ambient temperature ta = 50 °C - body: grey polycarbonate - diffusor with nanooptics (standard beam angle), transparent polycarbonate
NANOTTICA 1.2ft VP PC 1300/840 50 1320 1240 8 155 19.1 / 20.1 0,9 615 110 - 370
NANOTTICA 1.2ft VP PC 1600/840 50 1580 1490 10 149 19.7 / 20.7 0,9 615 110 - 370
NANOTTICA 1.2ft VP PC 2200/840 45 2200 2070 14 148 20.9 / 21.8 0,9 615 110 - 370
NANOTTICA 1.4ft VP PC 2600/840 50 2580 2430 16 152 19.2 / 20.3 1,7 1175 700 - 960
NANOTTICA 1.4ft VP PC 3200/840 50 3110 2920 20 146 19.9 / 20.9 1,7 1175 700 - 960
NANOTTICA 1.4ft VP PC 4400/840 45 4350 4090 27 151 21.0 / 22.1 1,7 1175 700 - 960
NANOTTICA 1.4ft VP PC 6400/840 45 6260 5880 38 155 22.3 / 23.4 1,7 1175 700 - 960
NANOTTICA 1.5ft VP PC 3250/840 50 3240 3050 20 153 19.3 / 20.4 2,0 1455 970 - 1230
NANOTTICA 1.5ft VP PC 4000/840 50 3880 3650 24 152 19.9 / 21.0 2,0 1455 970 - 1230
NANOTTICA 1.5ft VP PC 5500/840 45 5420 5090 33 154 21.0 / 22.2 2,0 1455 970 - 1230
NANOTTICA 1.5ft VP PC 8000/840 45 7740 7280 45 162 22.3 / 23.4 2,0 1455 970 - 1230

NANOTTICA VP PC Non-dimmable driver - plastic clips

Code Type 3F M3h 3F M3h

101217 NANOTTICA 1.2ft VP PC 1300/840 101228 x x
101218 NANOTTICA 1.2ft VP PC 1600/840 101229 x x
101219 NANOTTICA 1.2ft VP PC 2200/840 101230 x x
101220 NANOTTICA 1.4ft VP PC 2600/840 101231 101239 101247
101221 NANOTTICA 1.4ft VP PC 3200/840 101232 101240 101248
101222 NANOTTICA 1.4ft VP PC 4400/840 101233 101241 101249
101223 NANOTTICA 1.4ft VP PC 6400/840 101234 101242 101250
101224 NANOTTICA 1.5ft VP PC 3250/840 101235 101243 101251
101225 NANOTTICA 1.5ft VP PC 4000/840 101236 101244 101252
101226 NANOTTICA 1.5ft VP PC 5500/840 101237 101245 101253
101227 NANOTTICA 1.5ft VP PC 8000/840 101238 101246 101254

NANOTTICA VP PCc Non-dimmable driver - stainless clips (c)

Code Type 3F M3h 3F M3h

101255 NANOTTICA 1.2ft VP PCc 1300/840 101266 x x
101256 NANOTTICA 1.2ft VP PCc 1600/840 101267 x x
101257 NANOTTICA 1.2ft VP PCc 2200/840 101268 x x
101258 NANOTTICA 1.4ft VP PCc 2600/840 101269 101277 101285
101259 NANOTTICA 1.4ft VP PCc 3200/840 101270 101278 101286
101260 NANOTTICA 1.4ft VP PCc 4400/840 101271 101279 101287
101261 NANOTTICA 1.4ft VP PCc 6400/840 101272 101280 101288
101262 NANOTTICA 1.5ft VP PCc 3250/840 101273 101281 101289
101263 NANOTTICA 1.5ft VP PCc 4000/840 101274 101282 101290
101264 NANOTTICA 1.5ft VP PCc 5500/840 101275 101283 101291
101265 NANOTTICA 1.5ft VP PCc 8000/840 101276 101284 101292

CZECH LIGHT FITTINGS 53

 NANOTTICA VP PC, PCc

NANOTTICA VP PC DALI Digital dimmable driver DALI - plastic clips

Code Type 3F M3h 3F M3h

101293 NANOTTICA 1.2ft VP PC 1300/840 DALI x x x
101294 NANOTTICA 1.2ft VP PC 1600/840 DALI x x x
101295 NANOTTICA 1.2ft VP PC 2200/840 DALI x x x
101296 NANOTTICA 1.4ft VP PC 2600/840 DALI 101307 101315 101323
101297 NANOTTICA 1.4ft VP PC 3200/840 DALI 101308 101316 101324
101298 NANOTTICA 1.4ft VP PC 4400/840 DALI 101309 101317 101325
101299 NANOTTICA 1.4ft VP PC 6400/840 DALI 101310 101318 101326
101300 NANOTTICA 1.5ft VP PC 3250/840 DALI 101311 101319 101327
101301 NANOTTICA 1.5ft VP PC 4000/840 DALI 101312 101320 101328
101302 NANOTTICA 1.5ft VP PC 5500/840 DALI 101313 101321 101329
101303 NANOTTICA 1.5ft VP PC 8000/840 DALI 101314 101322 101330

NANOTTICA VP PCc DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 3F M3h 3F M3h

101331 NANOTTICA 1.2ft VP PCc 1300/840 DALI x x x
101332 NANOTTICA 1.2ft VP PCc 1600/840 DALI x x x
101333 NANOTTICA 1.2ft VP PCc 2200/840 DALI x x x
101334 NANOTTICA 1.4ft VP PCc 2600/840 DALI 101345 101353 101361
101335 NANOTTICA 1.4ft VP PCc 3200/840 DALI 101346 101354 101362
101336 NANOTTICA 1.4ft VP PCc 4400/840 DALI 101347 101355 101363
101337 NANOTTICA 1.4ft VP PCc 6400/840 DALI 101348 101356 101364
101338 NANOTTICA 1.5ft VP PCc 3250/840 DALI 101349 101357 101365
101339 NANOTTICA 1.5ft VP PCc 4000/840 DALI 101350 101358 101366
101340 NANOTTICA 1.5ft VP PCc 5500/840 DALI 101351 101359 101367
101341 NANOTTICA 1.5ft VP PCc 8000/840 DALI 101352 101360 101368

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

54
 NANOTTICA VP PC, PCc

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) To be attached to a track lighting system with a width of 60 mm using stainless steel snap-in mounting clips
d) Attachment with the use of side hangers to the wall

VARIABLE INSTALLATION PITCH

NANOTTICA VP PC

MAXIMUM

MINIMUM

LIGHT FITTING DETAILED VIEW

NANOTTICA VP PC

CZECH LIGHT FITTINGS 55

 NANOTTICA VP ABS

… for outdoor sheltered spaces, ceiling height from

3.5 to 8 m, chemically resistant.
USE ADVANTAGES
The fixture boasts a low unified glare rating with • Patented optics ensures absolute control • Multipurpose snap-in mounting clips – easy
UGR values its patented nanooptics. This ensures over light beam distribution attachment to a track lighting system with a
eye comfort, high visual performance and workplace
safety, which indirectly translates into higher pro- • Low UGR ranging from 18.9 to 23.2 width of 60 mm
ductivity. • Light fitting protection IP66 / IP69 • Optional throughwiring (up to 7 wires inside
• High temperature resistance in a range from the light fitting)
The fitting’s standard beam angle makes it a great ta = -25 °C to ta = 50 °C • Standard model CRI > 80: 4000 K
choice for premises with an optimum fitting installa-
tion height of 3.5 to 8 m. • Lifetime: 50 000 hours / L90B10 • On request CRI > 80: 3000 K, 5000 K, 6500 K
• High chemical resistance • CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
It is intended to be installed in sheltered outdoor • Variable suspension pitch, optional instal- • Optional delivery in dimmable version
spaces. It features a ventilation membrane that lation of light fitting even on an existing • Certificates: ESČ, ENEC, CB, DLG, HACCP
equalizes pressures while blocking water and con-
taminants that build up inside of the fitting as a result structure on which the original light fittings
of temperature fluctuations. The fitting is highly rec- were suspended
ommended for agricultural buildings and other spac-
es with chemically aggressive environments due to
ammonia fumes, lye fumes, alkali, hot water (hydroly-
sis) and oils. The product is primarily intended for
agricultural buildings and industrial halls such as
farms, stables, production plants and warehouses,
and spaces with permanently high humidity (such as
car washes and tunnels). Additionally, it is a perfect
choice for the tropical zone and coastal areas. IP69- up to up to

rated and HACCP-compliant, the fitting’s design also LED

50ºC -25ºC
makes it a great choice for the food industry.
CRI
220-240 V DALI L 90
The fitting´s base is made of ABS and diffuser of AC, >80 B 10
resulting in their exceptional chemical resistance.
Emissions in the environment of use may reduce the us-
ability of the plastics; for more information see page 325. HACCP

56
 NANOTTICA VP ABS, ABSc

NANOTTICA VP ABS, ABSc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 / IP69 • Body: dark grey ABS (high chemical resist-
• Maximum ambient temperature: ta = 50 °C ance, UV stability)
• Maximum ambient temperature: ta = 0-25 °C • A ventilation membrane in the base equalizes
for version with emergency back-up M1h, M3h pressures while blocking water and contaminants
• Lifetime: 50 000 hours / L90B10 • Reflector: steel sheet, white colour (RAL 9003)
• Maximum light fitting efficiency: 151 lm/W • Multipurpose mounting clips: stainless steel,
• UGR ranging from 18.9 to 23.2 stainless steel hooks included
• Optimum luminaire installation height • Clips: polyamide + 15 % glass fibre or stain-
from 3.5 to 8 m less steel + polyamide
• CRI > 80: 4000 K – standard • Sealing: polyurethane (PUR), foamed body
• CRI > 80: 3000 K, 5000 K, 6500 K - on request groove
• CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K • Cable glands: screwed PG 13.5
- on request • Terminal block: screwless, three-pole (basic
• MacAdam = 3 SDCM version), or screwed
• Diffuser: transparent AC with nanooptics (high • The values stated for power consumption and
chemical resistance, UV stability) luminous flux are in a tolerance of ± 7.5 %

NANOTTICA 1.5ft VP ABS

150° 180° 150°

A UGR EVALUATED FOR

120° 120°
D
98 X = 4 H, Y = 8 H S = 0.25 H
variable mounting pitch
90° 90°

Reflectivity 70/50/20

84
79
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System UGR Net
A D
Type temperature of LED modules of light fitting consumption efficacy Longitudinal/ weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] transverse [kg]
Up to ambient temperature ta = 50 °C - body dark grey ABS - diffusor with nanooptics (standard beam angle), transparent acrylate
NANOTTICA 1.2ft VP ABS 1300/840 50 1320 1160 8 145 18.9 / 19.8 0,9 615 110 - 370
NANOTTICA 1.2ft VP ABS 1600/840 50 1580 1390 10 139 19.5 / 20.5 0,9 615 110 - 370
NANOTTICA 1.2ft VP ABS 2200/840 45 2200 1940 14 139 20.6 / 21.6 0,9 615 110 - 370
NANOTTICA 1.4ft VP ABS 2600/840 50 2580 2270 16 142 19.0 / 20.1 1,7 1175 700 - 960
NANOTTICA 1.4ft VP ABS 3200/840 50 3110 2740 20 137 19.6 / 20.7 1,7 1175 700 - 960
NANOTTICA 1.4ft VP ABS 4400/840 45 4350 3830 27 142 20.8 / 21.9 1,7 1175 700 - 960
NANOTTICA 1.4ft VP ABS 6400/840 45 6260 5510 38 145 22.1 / 23.1 1,7 1175 700 - 960
NANOTTICA 1.5ft VP ABS 3250/840 50 3240 2850 20 143 19.0 / 20.1 2,0 1455 970 - 1230
NANOTTICA 1.5ft VP ABS 4000/840 50 3880 3410 24 142 19.7 / 20.8 2,0 1455 970 - 1230
NANOTTICA 1.5ft VP ABS 5500/840 45 5420 4770 33 145 20.8 / 21.9 2,0 1455 970 - 1230
NANOTTICA 1.5ft VP ABS 8000/840 45 7740 6810 45 151 22.1 / 23.2 2,0 1455 970 - 1230

NANOTTICA VP ABS Non-dimmable driver - plastic clips

Code Type 3F M3h 3F M3h

101369 NANOTTICA 1.2ft VP ABS 1300/840 101380 x x
101370 NANOTTICA 1.2ft VP ABS 1600/840 101381 x x
101371 NANOTTICA 1.2ft VP ABS 2200/840 101382 x x
101372 NANOTTICA 1.4ft VP ABS 2600/840 101383 101391 101399
101373 NANOTTICA 1.4ft VP ABS 3200/840 101384 101392 101400
101374 NANOTTICA 1.4ft VP ABS 4400/840 101385 101393 101401
101375 NANOTTICA 1.4ft VP ABS 6400/840 101386 101394 101402
101376 NANOTTICA 1.5ft VP ABS 3250/840 101387 101395 101403
101377 NANOTTICA 1.5ft VP ABS 4000/840 101388 101396 101404
101378 NANOTTICA 1.5ft VP ABS 5500/840 101389 101397 101405
101379 NANOTTICA 1.5ft VP ABS 8000/840 101390 101398 101406

NANOTTICA VP ABSc Non-dimmable driver - stainless clips (c)

Code Type 3F M3h 3F M3h

101407 NANOTTICA 1.2ft VP ABSc 1300/840 101418 x x
101408 NANOTTICA 1.2ft VP ABSc 1600/840 101419 x x
101409 NANOTTICA 1.2ft VP ABSc 2200/840 101420 x x
101410 NANOTTICA 1.4ft VP ABSc 2600/840 101421 101429 101437
101411 NANOTTICA 1.4ft VP ABSc 3200/840 101422 101430 101438
101412 NANOTTICA 1.4ft VP ABSc 4400/840 101423 101431 101439
101413 NANOTTICA 1.4ft VP ABSc 6400/840 101424 101432 101440
101414 NANOTTICA 1.5ft VP ABSc 3250/840 101425 101433 101441
101415 NANOTTICA 1.5ft VP ABSc 4000/840 101426 101434 101442
101416 NANOTTICA 1.5ft VP ABSc 5500/840 101427 101435 101443
101417 NANOTTICA 1.5ft VP ABSc 8000/840 101428 101436 101444

CZECH LIGHT FITTINGS 57

 NANOTTICA VP ABS, ABSc

NANOTTICA VP ABS DALI Digital dimmable driver DALI - plastic clips

Code Type 3F M3h 3F M3h

101445 NANOTTICA 1.2ft VP ABS 1300/840 DALI x x x
101446 NANOTTICA 1.2ft VP ABS 1600/840 DALI x x x
101447 NANOTTICA 1.2ft VP ABS 2200/840 DALI x x x
101448 NANOTTICA 1.4ft VP ABS 2600/840 DALI 101459 101467 101475
101449 NANOTTICA 1.4ft VP ABS 3200/840 DALI 101460 101468 101476
101450 NANOTTICA 1.4ft VP ABS 4400/840 DALI 101461 101469 101477
101451 NANOTTICA 1.4ft VP ABS 6400/840 DALI 101462 101470 101478
101452 NANOTTICA 1.5ft VP ABS 3250/840 DALI 101463 101471 101479
101453 NANOTTICA 1.5ft VP ABS 4000/840 DALI 101464 101472 101480
101454 NANOTTICA 1.5ft VP ABS 5500/840 DALI 101465 101473 101481
101455 NANOTTICA 1.5ft VP ABS 8000/840 DALI 101466 101474 101482

NANOTTICA VP ABSc DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 3F M3h 3F M3h

101483 NANOTTICA 1.2ft VP ABSc 1300/840 DALI x x x
101484 NANOTTICA 1.2ft VP ABSc 1600/840 DALI x x x
101485 NANOTTICA 1.2ft VP ABSc 2200/840 DALI x x x
101486 NANOTTICA 1.4ft VP ABSc 2600/840 DALI 101497 101505 101513
101487 NANOTTICA 1.4ft VP ABSc 3200/840 DALI 101498 101506 101514
101488 NANOTTICA 1.4ft VP ABSc 4400/840 DALI 101499 101507 101515
101489 NANOTTICA 1.4ft VP ABSc 6400/840 DALI 101500 101508 101516
101490 NANOTTICA 1.5ft VP ABSc 3250/840 DALI 101501 101509 101517
101491 NANOTTICA 1.5ft VP ABSc 4000/840 DALI 101502 101510 101518
101492 NANOTTICA 1.5ft VP ABSc 5500/840 DALI 101503 101511 101519
101493 NANOTTICA 1.5ft VP ABSc 8000/840 DALI 101504 101512 101520

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

58
 NANOTTICA VP ABS, ABSc

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) To be attached to a track lighting system with a width of 60 mm using stainless steel snap-in mounting clips
d) Attachment with the use of side hangers to the wall

VARIABLE INSTALLATION PITCH

NANOTTICA VP ABS

MAXIMUM

MINIMUM

LIGHT FITTING DETAILED VIEW

NANOTTICA VP ABS

CZECH LIGHT FITTINGS 59

 NANOTTICA MAX

... for extreme temperatures -40 °C to +65 °C,

ceiling height from 3.5 to 8 m.
USE ADVANTAGES
The fixture boasts a low unified glare rating with • Patented optics ensures absolute control • Multipurpose snap-in mounting clips – easy
UGR values its patented nanooptics. This ensures over light beam distribution attachment to a track lighting system with a
eye comfort, high visual performance and work- • Low UGR ranging from 19.9 to 22.2 width of 60 mm
place safety, which indirectly translates into higher • Light fitting protection IP66 / IP69 • Optional throughwiring (up to 7 wires inside
productivity. • High temperature resistance in a range from the light fitting)
ta = -40 °C to ta = 65 °C • Standard model CRI > 80: 4000 K
The fitting’s standard beam angle makes it a great
• Lifetime: 50 000 hours / L80B10 • On request CRI > 80: 3000 K, 5000 K, 6500 K
choice for premises with an optimum fitting instal-
• Variable suspension pitch, optional instal- • CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
lation height of 3.5 to 8 m.
lation of light fitting even on an existing • Optional delivery in dimmable version
Designed to be installed indoors, in sheltered out- structure on which the original light fittings • Certificates: HACCP
door spaces as well as in spaces with extreme were suspended
ambient temperatures as low as -40 °C or as high
as +65 °C. A ventilation membrane equalizes pres-
sures while blocking water and contaminants that
build up inside of the fitting as a result of tempera-
ture fluctuations. Highly recommended for heating
plants, metallurgical plants, glassworks, freezing
plants, cooling plants and other spaces with no ex- up to up to
plosion hazard. IP69-rated and HACCP-compliant, LED
the fitting’s design also makes it a great choice for 65ºC -40ºC

the food industry. 220-240 V DALI CRI

L 80
>80 B 10
Emissions in the environment of use may reduce the
usability of the plastics; for more information see
page 325. HACCP

60
 NANOTTICA MAX PCc

NANOTTICA MAX PCc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 / IP69 • Body: grey PC (high mechanical resistance,
• Maximum ambient temperature: ta = -40 °C UV stability)
• Maximum ambient temperature: ta = 65 °C • A ventilation membrane in the base equalizes
• Lifetime: 50 000 hours / L80B10 pressures while blocking water and contaminants
• Maximum light fitting efficiency: 154 lm/W • Reflector: steel sheet, white colour (RAL 9003)
• UGR ranging from 19.9 to 22.2 • Multipurpose mounting clips: stainless steel,
• Optimum luminaire installation height stainless steel hooks included
from 3.5 to 8 m • Clips: stainless steel + polyamide
• CRI > 80: 4000 K – standard • Sealing: polyurethane (PUR), foamed body
• CRI > 80: 3000 K, 5000 K, 6500 K - on request groove
• CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K • Cable glands: screwed PG 13.5
- on request • Terminal block: screwless, three-pole (basic
• MacAdam = 3 SDCM version), or screwed
• Diffuser: transparent PC with nanooptics • The values stated for power consumption and
(high mechanical resistance, UV stability) luminous flux are in a tolerance of ± 7.5 %

NANOTTICA 1.5ft MAX

150° 180° 150°

A UGR EVALUATED FOR

120° 120°
D
98 X = 4 H, Y = 8 H S = 0.25 H
variable mounting pitch
90° 90°

Reflectivity 70/50/20

84
79
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System UGR Net
A D
Type temperature of LED modules of light fitting consumption efficacy Longitudinal/ weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] transverse [kg]
Up to ambient temperature ta = 65 °C - body: grey polycarbonate - diffusor with nanooptics (standard beam angle), transparent polycarbonate
NANOTTICA 1.4ft MAX PCc 3200/840 65 3110 2920 20 146 19.9 / 20.9 1,7 1175 700 - 960
NANOTTICA 1.4ft MAX PCc 4400/840 60 4350 4090 27 151 21.0 / 22.1 1,7 1175 700 - 960
NANOTTICA 1.5ft MAX PCc 4000/840 65 3880 3650 24 152 19.9 / 21.0 2,0 1455 970 - 1230
NANOTTICA 1.5ft MAX PCc 5500/840 60 5420 5090 33 154 21.0 / 22.2 2,0 1455 970 - 1230

NANOTTICA MAX PCc Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h DALI DALI 3F

101521 NANOTTICA 1.4ft MAX PCc 3200/840 101525 101529 x x 101533 101537
101522 NANOTTICA 1.4ft MAX PCc 4400/840 101526 101530 x x 101534 101538
101523 NANOTTICA 1.5ft MAX PCc 4000/840 101527 101531 x x 101535 101539
101524 NANOTTICA 1.5ft MAX PCc 5500/840 101528 101532 x x 101536 101540

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

CZECH LIGHT FITTINGS 61

 NANOTTICA MAX PCc

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) To be attached to a track lighting system with a width of 60 mm using stainless steel snap-in mounting clips
d) Attachment with the use of side hangers to the wall

VARIABLE INSTALLATION PITCH

NANOTTICA MAX

MAXIMUM

MINIMUM

LIGHT FITTING DETAILED VIEW

NANOTTICA MAX

62
NANOTTICA CLASS II

… class II insulation, ceiling height from 3.5 to 8 m,

impact resistant.
USE ADVANTAGES
The fixture boasts a low unified glare rating with • Patented optics ensures absolute control • Multipurpose snap-in mounting clips – easy
UGR values its patented nanooptics. This ensures over light beam distribution attachment to a track lighting system with a
eye comfort, high visual performance and work- • Low UGR ranging from 19.2 to 23.4 width of 60 mm
place safety, which indirectly translates into higher
• Light fitting protection IP66 / IP69 • Optional throughwiring (up to 6 wires inside
productivity.
• High temperature resistance in a range from the light fitting)
The fitting is highly recommended for illumination ta = -25 °C to ta = 50 °C • Standard model CRI > 80: 4000 K
of premises where workers’ visual precision is of • Lifetime: 50 000 hours / L90B10 • On request CRI > 80: 3000 K, 5000 K, 6500 K
paramount importance. These include workshops • High mechanical resistance IK10 • CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
where fine assembly work is performed as well as • Variable suspension pitch, optional instal- • Optional delivery in dimmable version
craft workshops and visual inspection areas. lation of light fitting even on an existing
Its standard beam angle makes it a perfect choice structure on which the original light fittings
for premises with an optimum luminaire installation were suspended
height of 3.5 to 8 m. The fixture is intended for in-
door spaces, industrial and agricultural buildings,
warehouses, rail vehicle maintenance facilities,
platforms, substations, depots, car parks, ga-
rages, workshops and laboratories with no explo-
sion hazard. IP69-rated and HACCP-compliant, the
fitting’s design also makes it a great choice for the up to up to

food industry. LED

50ºC -25ºC

CRI
Made of clear polycarbonate, the base and the dif- 220-240 V DALI L 90
>80
fuser boast high impact and deformation resist- B 10
ance. Emissions in the environment of use may
reduce the usability of the plastics; for more infor-
mation see page 325.

CZECH LIGHT FITTINGS 63

 NANOTTICA CLASS II PC, PCc

NANOTTICA CLASS II P C, PCc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 / IP69 • Body: grey PC (high mechanical resistance,
• Maximum ambient temperature: ta = 50 °C UV stability)
• Maximum ambient temperature: ta = 0-25 °C • Reflector: steel sheet, white colour (RAL 9003)
for version with emergency back-up M1h, M3h • Multipurpose mounting clips: stainless steel,
• Lifetime: 50 000 hours / L90B10 stainless steel hooks included
• Maximum light fitting efficiency: 162 lm/W • Clips: polyamide + 15 % glass fibre or stain-
• UGR ranging from 19.1 to 23.4 less steel + polyamide
• Optimum luminaire installation height • Sealing: polyurethane (PUR), foamed body
from 3.5 to 8 m groove
• CRI > 80: 4000 K – standard • Connectors with 2, 4 or 6 poles, wire section
• CRI > 80: 3000 K, 5000 K, 6500 K - on request 1.5 or 2.5 mm2
• CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K • The package includes the opposite of the
- on request counterpart
• MacAdam = 3 SDCM • The values stated for power consumption and
• Diffuser: transparent PC with nanooptics luminous flux are in a tolerance of ± 7.5 %
(high mechanical resistance, UV stability)

NANOTTICA 1.5ft CLASS II

150° 180° 150°

A UGR EVALUATED FOR

120° 120°
D
98 X = 4 H, Y = 8 H S = 0.25 H
variable mounting pitch
90° 90°

Reflectivity 70/50/20

84
79
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System UGR Net
A D
Type temperature of LED modules of light fitting consumption efficacy Longitudinal/ weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] transverse [kg]
Up to ambient temperature ta = 50 °C - body: grey polycarbonate - diffusor with nanooptics (standard beam angle), transparent polycarbonate
NANOTTICA 1.2ft CLASS II PC 1300/840 50 1320 1240 8 155 19.1 / 20.1 0,9 615 110 - 370
NANOTTICA 1.2ft CLASS II PC 1600/840 50 1580 1490 10 149 19.7 / 20.7 0,9 615 110 - 370
NANOTTICA 1.2ft CLASS II PC 2200/840 45 2200 2070 14 148 20.9 / 21.8 0,9 615 110 - 370
NANOTTICA 1.4ft CLASS II PC 2600/840 50 2580 2430 16 152 19.2 / 20.3 1,7 1175 700 - 960
NANOTTICA 1.4ft CLASS II PC 3200/840 50 3110 2920 20 146 19.9 / 20.9 1,7 1175 700 - 960
NANOTTICA 1.4ft CLASS II PC 4400/840 45 4350 4090 27 151 21.0 / 22.1 1,7 1175 700 - 960
NANOTTICA 1.4ft CLASS II PC 6400/840 45 6260 5880 38 155 22.3 / 23.4 1,7 1175 700 - 960
NANOTTICA 1.5ft CLASS II PC 3250/840 50 3240 3050 20 153 19.3 / 20.4 2,0 1455 970 - 1230
NANOTTICA 1.5ft CLASS II PC 4000/840 50 3880 3650 24 152 19.9 / 21.0 2,0 1455 970 - 1230
NANOTTICA 1.5ft CLASS II PC 5500/840 45 5420 5090 33 154 21.0 / 22.2 2,0 1455 970 - 1230
NANOTTICA 1.5ft CLASS II PC 8000/840 45 7740 7280 45 162 22.3 / 23.4 2,0 1455 970 - 1230

NANOTTICA CLASS II PC Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

101813 NANOTTICA 1.2ft CLASS II PC 1300/840 101824 101835 x x x x
101814 NANOTTICA 1.2ft CLASS II PC 1600/840 101825 101836 x x x x
101815 NANOTTICA 1.2ft CLASS II PC 2200/840 101826 101837 x x x x
101816 NANOTTICA 1.4ft CLASS II PC 2600/840 101827 101838 101846 101854 101862 101870
101817 NANOTTICA 1.4ft CLASS II PC 3200/840 101828 101839 101847 101855 101863 101871
101818 NANOTTICA 1.4ft CLASS II PC 4400/840 101829 101840 101848 101856 101864 101872
101819 NANOTTICA 1.4ft CLASS II PC 6400/840 101830 101841 101849 101857 101865 101873
101820 NANOTTICA 1.5ft CLASS II PC 3250/840 101831 101842 101850 101858 101866 101874
101821 NANOTTICA 1.5ft CLASS II PC 4000/840 101832 101843 101851 101859 101867 101875
101822 NANOTTICA 1.5ft CLASS II PC 5500/840 101833 101844 101852 101860 101868 101876
101823 NANOTTICA 1.5ft CLASS II PC 8000/840 101834 101845 101853 101861 101869 101877

NANOTTICA CLASS II PCc Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

101878 NANOTTICA 1.2ft CLASS II PCc 1300/840 101889 101900 x x x x
101879 NANOTTICA 1.2ft CLASS II PCc 1600/840 101890 101901 x x x x
101880 NANOTTICA 1.2ft CLASS II PCc 2200/840 101891 101902 x x x x
101881 NANOTTICA 1.4ft CLASS II PCc 2600/840 101892 101903 101911 101919 101927 101935
101882 NANOTTICA 1.4ft CLASS II PCc 3200/840 101893 101904 101912 101920 101928 101936
101883 NANOTTICA 1.4ft CLASS II PCc 4400/840 101894 101905 101913 101921 101929 101937
101884 NANOTTICA 1.4ft CLASS II PCc 6400/840 101895 101906 101914 101922 101930 101938
101885 NANOTTICA 1.5ft CLASS II PCc 3250/840 101896 101907 101915 101923 101931 101939
101886 NANOTTICA 1.5ft CLASS II PCc 4000/840 101897 101908 101916 101924 101932 101940
101887 NANOTTICA 1.5ft CLASS II PCc 5500/840 101898 101909 101917 101925 101933 101941
101888 NANOTTICA 1.5ft CLASS II PCc 8000/840 101899 101910 101918 101926 101934 101942

64
 NANOTTICA CLASS II PC, PCc

NANOTTICA CLASS II PC DALI Digital dimmable driver DALI - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

101943 NANOTTICA 1.2ft CLASS II PC 1300/840 DALI 101954 x x x x x
101944 NANOTTICA 1.2ft CLASS II PC 1600/840 DALI 101955 x x x x x
101945 NANOTTICA 1.2ft CLASS II PC 2200/840 DALI 101956 x x x x x
101946 NANOTTICA 1.4ft CLASS II PC 2600/840 DALI 101957 101968 101976 101984 101992 102000
101947 NANOTTICA 1.4ft CLASS II PC 3200/840 DALI 101958 101969 101977 101985 101993 102001
101948 NANOTTICA 1.4ft CLASS II PC 4400/840 DALI 101959 101970 101978 101986 101994 102002
101949 NANOTTICA 1.4ft CLASS II PC 6400/840 DALI 101960 101971 101979 101987 101995 102003
101950 NANOTTICA 1.5ft CLASS II PC 3250/840 DALI 101961 101972 101980 101988 101996 102004
101951 NANOTTICA 1.5ft CLASS II PC 4000/840 DALI 101962 101973 101981 101989 101997 102005
101952 NANOTTICA 1.5ft CLASS II PC 5500/840 DALI 101963 101974 101982 101990 101998 102006
101953 NANOTTICA 1.5ft CLASS II PC 8000/840 DALI 101964 101975 101983 101991 101999 102007

NANOTTICA CLASS II PCc DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

102008 NANOTTICA 1.2ft CLASS II PCc 1300/840 DALI 102019 x x x x x
102009 NANOTTICA 1.2ft CLASS II PCc 1600/840 DALI 102020 x x x x x
102010 NANOTTICA 1.2ft CLASS II PCc 2200/840 DALI 102021 x x x x x
102011 NANOTTICA 1.4ft CLASS II PCc 2600/840 DALI 102022 102033 102041 102049 102057 102065
102012 NANOTTICA 1.4ft CLASS II PCc 3200/840 DALI 102023 102034 102042 102050 102058 102066
102013 NANOTTICA 1.4ft CLASS II PCc 4400/840 DALI 102024 102035 102043 102051 102059 102067
102014 NANOTTICA 1.4ft CLASS II PCc 6400/840 DALI 102025 102036 102044 102052 102060 102068
102015 NANOTTICA 1.5ft CLASS II PCc 3250/840 DALI 102026 102037 102045 102053 102061 102069
102016 NANOTTICA 1.5ft CLASS II PCc 4000/840 DALI 102027 102038 102046 102054 102062 102070
102017 NANOTTICA 1.5ft CLASS II PCc 5500/840 DALI 102028 102039 102047 102055 102063 102071
102018 NANOTTICA 1.5ft CLASS II PCc 8000/840 DALI 102029 102040 102048 102056 102064 102072

LEGEND
CLASS II 1F 1-phase 2 core through-wiring in the luminaire
CLASS II 3F 3-phase 4 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination
CLASS II 3F Mxh 3-phase 4 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)

DALI version with digital dimmable driver DALI

CLASS II DALI 1F 1-phase 4 core through-wiring in the luminaire
CLASS II DALI 3F 3-phase 6 core through-wiring in the luminaire
CLASS II DALI 3F Mxh 3-phase 6 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)

CZECH LIGHT FITTINGS 65

 NANOTTICA CLASS II PC, PCc

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) To be attached to a track lighting system with a width of 60 mm using stainless steel snap-in mounting clips
d) Attachment with the use of side hangers to the wall

VARIABLE INSTALLATION PITCH

NANOTTICA CLASS II

MAXIMUM

MINIMUM

LIGHT FITTING DETAILED VIEW

NANOTTICA CLASS II

66
NANOTTICA SNS

… with movement detector, ceiling height from 3.5 to 6 m.

USE ADVANTAGES
The fixture boasts a low unified glare rating with • Patented optics ensures absolute control • Multipurpose snap-in mounting clips – easy
UGR values its patented nanooptics. This ensures over light beam distribution attachment to a track lighting system with a
eye comfort, high visual performance and work- • Includes an in-built microwave motion width of 60 mm
place safety, which indirectly translates into higher
sensor • Optional throughwiring (up to 7 wires inside
productivity.
• Low UGR ranging from 19.2 to 23.4 the light fitting)
Highly recommended also for illumination of • Light fitting protection IP66 / IP69 • Standard model CRI > 80: 4000 K
spaces where workers’ visual precision is of • High temperature resistance in a range from • On request CRI > 80: 3000 K, 5000 K, 6500 K
paramount importance. These include workshops ta = -25 °C to ta = 50 °C • CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
where fine assembly work is performed as well as • Lifetime: 50 000 hours / L90B10 • Optional delivery in dimmable version
visual inspection areas. Its standard beam angle • High mechanical resistance IK10 • Certificates: HACCP
with the sensor makes it a perfect choice for prem- • Variable suspension pitch, optional instal-
ises with an optimum luminaire installation height
of 3.5 to 6 m. lation of light fitting even on an existing
structure on which the original light fittings
It is designed for indoor spaces, industrial prem- were suspended
ises, agricultural buildings, warehouses as well
as sports facilities, transport hubs, car parks and
garages, workshops and laboratories with no ex-
plosion hazard. IP69-rated and HACCP-compliant,
the fitting’s design also makes it a great choice for up to up to
the food industry. LED
50ºC -25ºC

Made of clear polycarbonate, the base and the dif- 220-240 V DALI CRI
L 90
fuser boast high impact and deformation resist- >80 B 10
ance. Emissions in the environment of use may
reduce the usability of the plastics; for more infor- HACCP
mation see page 325.

CZECH LIGHT FITTINGS 67

 NANOTTICA SNS PC, PCc

NANOTTICA SNS P C, PCc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 / IP69 • Reflector: steel sheet, white colour (RAL 9003)
• Maximum ambient temperature: ta = 50 °C • Multipurpose mounting clips: stainless steel,
• Maximum ambient temperature: ta = 0-25 °C stainless steel hooks included
for version with emergency back-up M1h, M3h • Clips: polyamide + 15 % glass fibre or stain-
• Lifetime: 50 000 hours / L90B10 less steel + polyamide
• Maximum light fitting efficiency: 158 lm/W • Sealing: polyurethane (PUR), foamed body
• UGR ranging from 19,2 to 23,4 groove
• Optimum luminaire installation height • Motion sensor: 360° range, switch on height
from 3.5 to 6 m 1 – 6 m, time range 5 sec – 30 min, switch-on
• CRI > 80: 4000 K – standard sensitivity 2 – 50 lux
• CRI > 80: 3000 K, 5000 K, 6500 K - on request • Cable glands: screwed PG 13.5
• CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K (standard), or rubber (SBS)
- on request • Terminal block: screwless, three-pole (basic
• MacAdam = 3 SDCM version), or screwed
• Diffuser: transparent PC with nanooptics • The values stated for power consumption and
(high mechanical resistance, UV stability) luminous flux are in a tolerance of ± 7.5 %
• Body: grey PC (high mechanical resistance,
UV stability)

NANOTTICA 1.4ft SNS

150° 180° 150°

A UGR EVALUATED FOR

120° 120°
D
98 X = 4 H, Y = 8 H S = 0.25 H
variable mounting pitch
90° 90°

Reflectivity 70/50/20

84
79
C0 60° 60°

C90
30° 0° 30°

Max, ambient Luminous flux Luminous flux Power System UGR Net
A D
Type temperature of LED modules of light fitting consumption efficacy Longitudinal/ weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] transverse [kg]
Up to ambient temperature ta = 50 °C - body: grey polycarbonate - diffusor with nanooptics (standard beam angle), transparent polycarbonate
NANOTTICA 1.4ft SNS PC 2600/840 50 2380 2240 15 149 19.2 / 20.3 1,8 1175 700 - 960
NANOTTICA 1.4ft SNS PC 3200/840 50 2850 2680 18 149 19.9 / 20.9 1,8 1175 700 - 960
NANOTTICA 1.4ft SNS PC 4400/840 45 3960 3720 25 149 21.0 / 22.1 1,8 1175 700 - 960
NANOTTICA 1.4ft SNS PC 6400/840 45 5610 5270 34 155 22.3 / 23.4 1,8 1175 700 - 960
NANOTTICA 1.5ft SNS PC 3250/840 50 3030 2850 19 150 19.3 / 20.4 2,1 1455 970 - 1230
NANOTTICA 1.5ft SNS PC 4000/840 50 3610 3390 23 147 19.9 / 21.0 2,1 1455 970 - 1230
NANOTTICA 1.5ft SNS PC 5500/840 45 5010 4710 31 152 21.0 / 22.2 2,1 1455 970 - 1230
NANOTTICA 1.5ft SNS PC 8000/840 45 7070 6650 42 158 22.3 / 23.4 2,1 1455 970 - 1230

NANOTTICA SNS PC Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

102073 NANOTTICA 1.4ft SNS PC 2600/840 102081 102089 102097 102105 102111 102119
102074 NANOTTICA 1.4ft SNS PC 3200/840 102082 102090 102098 102106 102112 102120
102075 NANOTTICA 1.4ft SNS PC 4400/840 102083 102091 102099 102107 102113 102121
102076 NANOTTICA 1.4ft SNS PC 6400/840 102084 102092 102100 103647 102114 103648
102077 NANOTTICA 1.5ft SNS PC 3250/840 102085 102093 102101 102108 102115 102122
102078 NANOTTICA 1.5ft SNS PC 4000/840 102086 102094 102102 102109 102116 102123
102079 NANOTTICA 1.5ft SNS PC 5500/840 102087 102095 102103 102110 102117 102124
102080 NANOTTICA 1.5ft SNS PC 8000/840 102088 102096 102104 103649 102118 103418

NANOTTICA SNS PCc Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

102125 NANOTTICA 1.4ft SNS PCc 2600/840 102133 102141 102149 102157 102163 102171
102126 NANOTTICA 1.4ft SNS PCc 3200/840 102134 102142 102150 102158 102164 102172
102127 NANOTTICA 1.4ft SNS PCc 4400/840 102135 102143 102151 102159 102165 102173
102128 NANOTTICA 1.4ft SNS PCc 6400/840 102136 102144 102152 103419 102166 103420
102129 NANOTTICA 1.5ft SNS PCc 3250/840 102137 102145 102153 102160 102167 102174
102130 NANOTTICA 1.5ft SNS PCc 4000/840 102138 102146 102154 102161 102168 102175
102131 NANOTTICA 1.5ft SNS PCc 5500/840 102139 102147 102155 102162 102169 102176
102132 NANOTTICA 1.5ft SNS PCc 8000/840 102140 102148 102156 103421 102170 103422

68
 NANOTTICA SNS PC, PCc

NANOTTICA SNS PC CORRIDOR Digital dimmable driver DALI - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

102177 NANOTTICA 1.4ft SNS PC 2600/840 CORRIDOR 102185 102193 102201 x 102212 x
102178 NANOTTICA 1.4ft SNS PC 3200/840 CORRIDOR 102186 102194 102202 x 102213 x
102179 NANOTTICA 1.4ft SNS PC 4400/840 CORRIDOR 102187 102195 102203 x 102214 x
102180 NANOTTICA 1.4ft SNS PC 6400/840 CORRIDOR 102188 102196 102204 103635 102215 103637
102181 NANOTTICA 1.5ft SNS PC 3250/840 CORRIDOR 102189 102197 102205 102209 102216 102220
102182 NANOTTICA 1.5ft SNS PC 4000/840 CORRIDOR 102190 102198 102206 102210 102217 102221
102183 NANOTTICA 1.5ft SNS PC 5500/840 CORRIDOR 102191 102199 102207 102211 102218 102222
102184 NANOTTICA 1.5ft SNS PC 8000/840 CORRIDOR 102192 102200 102208 103636 102219 103638

NANOTTICA SNS PCc CORRIDOR Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

102223 NANOTTICA 1.4ft SNS PCc 2600/840 CORRIDOR 102231 102239 102247 x 102265 x
102224 NANOTTICA 1.4ft SNS PCc 3200/840 CORRIDOR 102232 102240 102248 x 102266 x
102225 NANOTTICA 1.4ft SNS PCc 4400/840 CORRIDOR 102233 102241 102256 x 102267 x
102226 NANOTTICA 1.4ft SNS PCc 6400/840 CORRIDOR 102234 102242 102257 103639 102268 103641
102227 NANOTTICA 1.5ft SNS PCc 3250/840 CORRIDOR 102235 102243 102258 102262 102269 102273
102228 NANOTTICA 1.5ft SNS PCc 4000/840 CORRIDOR 102236 102244 102259 102263 102270 102274
102229 NANOTTICA 1.5ft SNS PCc 5500/840 CORRIDOR 102237 102245 102260 102264 102271 102275
102230 NANOTTICA 1.5ft SNS PCc 8000/840 CORRIDOR 102238 102246 102261 103640 102272 103642

LEGEND
SNS 1F 1-phase 3 core through-wiring in the luminaire for connection of max. 5 slave luminaires
SNS 3F 3-phase 5 core through-wiring in the luminaire for connection of max. 5 slave luminaires (sensor connected to L3)
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination
SNS 3F Mxh 3-phase 5 core through-wiring in the luminaire for connection of max. 5 slave luminaires (sensor and emergency unit connected to L3)

CORRIDOR version with digital dimmable driver DALI and set corridor function
CORRIDOR 1F 1-phase 5 core through-wiring in the luminaire for connection of max. 20 luminaires
CORRIDOR 3F 3-phase 7 core through-wiring in the luminaire for connection of max. 20 luminaires (sensor connected to L3)
CORRIDOR 3F Mxh 3-phase 7 core through-wiring in the luminaire for connection of max. 20 luminaires (sensor and emergency unit connected to L3)

CZECH LIGHT FITTINGS 69

 NANOTTICA SNS PC, PCc

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) To be attached to a track lighting system with a width of 60 mm using stainless steel snap-in mounting clips
d) Attachment with the use of side hangers to the wall

VARIABLE INSTALLATION PITCH

NANOTTICA SNS

MAXIMUM

MINIMUM

LIGHT FITTING DETAILED VIEW

NANOTTICA SNS

70
 NANOTTICA accessories

OM – protective grid
The metal grid protects the light fitting against mechanical damage and unauthorised handling. It is attached to the surface with the use of screws.
The surface is treated with the RAL 9003 powder-coated colour.

Weight
Code Type Description
[kg]
11941 OM 218 protective grid for types 218, 214/224, 2.2ft (700 × 220 × 130 mm) 1,0
11942 OM 236 protective grid for types 236, 228/254, 2.4ft (1300 × 220 × 130 mm) 1,7
11943 OM 258 protective grid for types 258, 235/249/280, 2.5ft (1600 × 220 × 130 mm) 2,0

BZ – side hanger
It serves to attach the light fitting to the wall with the possibility of its positioning.

Weight
Code Typee Description
[kg]
90002 BZ side hanger with blocking (set for 1 light fitting) 0,4

Canalis busbar system connector

The connector enables a quick 1 phase or 3 phase interconnection of light fittings without their opening.

Weight
Code Type Description
[kg]
79001 KBA 40 ZU light fitting suspended holder - Canalis KBA system 0,1
70002 KBC 10 CC211 connector with 1 m cable - Canalis KBA system 0,2

CZECH LIGHT FITTINGS 71

INNOVA

INDUSTRIAL
PLASTIC
IP66 / IP69
PLUG AND PLAY
 PRODUCT OVERVIEW

INNOVA – industrial plastic LED light fitting

INNOVA
page 74

IP66 IP69 INNOVA PC

page 74

INNOVA
FOR HIGH CEILINGS
page 77

IP66 IP69 INNOVA NB PC

page 77

INNOVA
FOR LOW CEILINGS
page 80

IP66 IP69 INNOVA WB PC

page 80

INNOVA - CHEMICALLY
RESISTANT VERSION
page 83

IP66 IP69 INNOVA ABS

page 83

INNOVA FOR HIGH CEIL-

INGS - CHEMICALLY
RESISTANT VERSION
page 86
IP66 IP69 INNOVA NB ABS
page 86

INNOVA FOR LOW

CEILINGS - CHEMICALLY
RESISTANT VERSION
page 89
IP66 IP69 INNOVA WB ABS
page 89

INNOVA FOR BOTH

DIRECT AND INDIRECT
ILLUMINA
page 92
IP66 IP69 INNOVA TRS
page 92

INNOVA
ACCESSORIES
page 95

INNOVA
ACCESSORIES
page 95

www.bim.lighting/en

CZECH LIGHT FITTINGS 73

 INNOVA

… dustproof, waterproof and impact-resistant.

USE ADVANTAGES
Closed and non-dismountable light fitting accord- • Light fitting protection IP66 / IP69 • Optional arrangement of light fittings in line
ing to the standard ČSN EN 60598-1 part 4 suitable • High temperature resistance in a range from without gaps
for indoor and outdoor space (even without shelter), ta = -25 °C to ta = 50 °C • Fully automatic 100% control of functionality
industrial, warehouse and agricultural buildings, • Lifetime: 50 000 hours / L90B10 and tightness (leak test) during production
sports premises, transport terminals, parking lots • High mechanical resistance IK10 • Easy cleaning and maintenance without need
and garages, workshops and laboratories without • Variable suspension pitch; optional installation of replacing the light sources
explosion hazard. The structural design of the light of light fitting even on an existing structure • Eliminated risk of mechanical and electro-
fitting (IP69) allows even placement in food-process- on which the original light fittings were static damage to LED chips
ing industry - HACCP. suspended • Optional throughwiring (up to 5 wires inside
• Modernized stainless steel snap-in mounting the light fitting)
The light fitting resists dust, humidity and wash- clips – easy attachment to a track lighting • Optional delivery in dimmable version
ing with spouting water up to 80 °C. The body and system with a width of 60 mm • Certificates: ESČ, ENEC, CB, HACCP
the diffuser made of PC material have high me- • External terminal strip makes it easy to
chanical resistance against impact and deformation. connect the supply cable – PLUG and PLAY
system
An external terminal strip makes it easy and
quick to connect the supply cable with no need to
open the fitting (PLUG and PLAY system). up to up to
LED
50ºC -25ºC
Emissions in the environment of use may reduce the
CRI
usability of the plastics; for more information see 220-240 V DALI L 90
>80 B 10
page 325.
HACCP

74
 INNOVA PC

INNOVA P C
TECHNICAL DESCRIPTION
• Light fitting protection: IP66 / IP69 • Ventilation membrane in the base eliminating
• Maximum ambient temperature: ta = 50 °C vacuum and condensate build-up
• Lifetime: 50 000 hours / L90B10 • 3 or 5-pole external terminal strip, conductor
• Maximum light fitting efficiency: 162 lm/W cross-sectional area: 1.5 or 2.5 mm2
• CRI > 80: 4000 K – standard • Fittings may be lined with zero distance
• CRI > 80: 3000 K, 5000 K, 6500 K - on request between them
• CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K • Optional constant luminous flux (CLO) in DALI
- on request version
• MacAdam = 3 SDCM • Electric equipment: LED modules, fixed output
• Diffuser: translucent PC (high mechanical driver or DALI driver
resistance, UV stability) • The package includes: stainless hooks and
• Body: grey PC (high mechanical resistance, stainless brackets
UV stability) • The values stated for power consumption and
• Snap-in mounting clips: made of stainless luminous flux are in a tolerance of ± 7,5 %
steel and allowing easy attachment to a track
lighting system with a width of 60 mm

INNOVA 1.5ft
A 150° 180° 150°

D 120° 120°

variable mounting pitch 118 90

90° 90°

106
93
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
Up to ambient temperature ta = 50 °C - body: grey polycarbonate - diffuser: translucent polycarbonate
INNOVA 1.4ft PC 2600/840 50 2580 2430 16 152 1,5 1175 420 - 700
INNOVA 1.4ft PC 3200/840 50 3110 2920 20 146 1,5 1175 420 - 700
INNOVA 1.4ft PC 4400/840 45 4350 4090 27 151 1,5 1175 420 - 700
INNOVA 1.4ft PC 6400/840 45 6260 5880 38 155 1,5 1175 420 - 700
INNOVA 1.4ft PC 8800/840 40 8710 8190 51 161 1,6 1175 420 - 700
INNOVA 1.5ft PC 3250/840 50 3240 3050 20 153 1,8 1455 700 - 980
INNOVA 1.5ft PC 4000/840 50 3880 3650 24 152 1,8 1455 700 - 980
INNOVA 1.5ft PC 5500/840 45 5420 5090 33 154 1,8 1455 700 - 980
INNOVA 1.5ft PC 8000/840 45 7740 7280 45 162 1,8 1455 700 - 980
INNOVA 1.5ft PC 11000/840 40 12050 11330 71 160 1,9 1455 700 - 980

INNOVA 1.4ft PC 3200/840 = suitable replacement for tube light fitting PRIMA 136 PC – 1 × 36 W
INNOVA 1.4ft PC 6400/840 = suitable replacement for tube light fitting PRIMA 236 PC – 2 × 36 W
INNOVA 1.5ft PC 4000/840 = suitable replacement for tube light fitting PRIMA 158 PC – 1 × 58 W
INNOVA 1.5ft PC 8000/840 = suitable replacement for tube light fitting PRIMA 258 PC – 2 × 58 W

INNOVA PC Diffuser made of translucent polycarbonate

Type 1x3P 1x5P DALI 1x5P 2x3P 2x5P DALI 2x5P

INNOVA 1.4ft PC 2600/840... 72111 72112 72113 72115 72116 72117
INNOVA 1.4ft PC 3200/840... 72121 72122 72123 72125 72126 72127
INNOVA 1.4ft PC 4400/840... 72131 72132 72133 72135 72136 72137
INNOVA 1.4ft PC 6400/840... 72141 72142 72143 72145 72146 72147
INNOVA 1.4ft PC 8800/840... 72101 72102 72103 72105 72106 72107
INNOVA 1.5ft PC 3250/840... 72151 72152 72153 72155 72156 72157
INNOVA 1.5ft PC 4000/840... 72161 72162 72163 72165 72166 72167
INNOVA 1.5ft PC 5500/840... 72171 72172 72173 72175 72176 72177
INNOVA 1.5ft PC 8000/840... 72181 72182 72183 72185 72186 72187
INNOVA 1.5ft PC 11000/840... 72191 72192 72193 72195 72196 72197

LEGEND
1x3P - a version featuring a non-dimmable ballast and a single 3-pole external terminal strip
1x5P - a version featuring a non-dimmable ballast and a single 5-pole external terminal strip
DALI 1x5P - a version featuring a digitally dimmable ballast and a single 5-pole external terminal strip

2x3P - a version featuring a non-dimmable ballast, two 3-pole external terminal strips and 3-wire connecting cables (1F), for continuous row installation
2x5P - a version featuring a non-dimmable ballast, two 5-pole external terminal strips and 5-wire connecting cables (3F), for continuous row installation
DALI 2x5P - a version featuring a digitally dimmable ballast, two 5-pole external terminal strips and 5-wire connecting cables (DALI 1F), for continuous row installation

CZECH LIGHT FITTINGS 75

 INNOVA PC

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) To be attached to a track lighting system with a width of 60 mm using stainless steel snap-in mounting clips
d) Attachment with the use of side hangers to the wall

VARIABLE INSTALLATION PITCH

MINIMUM MAXIMUM

LIGHT FITTING INTERCONNECTION

An external terminal strip is used to ensure the supply cable can easily and quickly be connected with no need to open the light fixture (PLUG and PLAY system)

Interconnection of light fittings without spacing

LIGHT FITTING DETAILED VIEW

INNOVA PC

76
INNOVA NB

… impact-resistant, for areas with high ceilings of 8 – 12 m.

USE ADVANTAGES
Closed and non-dismountable light fitting according • Light fitting protection IP66 / IP69 • Optional arrangement of light fittings in line
to the standard ČSN EN 60598-1 part 4 with Narrow • High temperature resistance in a range from without gaps
Beam optics suitable for inside and outside spaces ta = -25 °C to ta = 45 °C • Fully automatic 100% control of functionality
(even without shelter) intended for suspension height • Lifetime: 50 000 hours / L90B10 and tightness (leak test) during production
from 8 to 12 m, e.g. inside or outside walls and cor- • High mechanical resistance IK10 • Easy cleaning and maintenance without need
ridors of high industrial, agricultural, warehouse • Narrow Beam (NB), ceiling height 8 to 12 m of replacing the light sources
or sports buildings, rack aisles in warehouses, • Variable suspension pitch; optional instal- • Eliminated risk of mechanical and electro-
outdoor playgrounds, covered sports arenas. The lation of light fitting even on an existing static damage to LED chips
structural design of the light fitting (IP69) allows even structure on which the original light fittings • Optional throughwiring (up to 5 wires inside
placement in food-processing industry - HACCP. were suspended the light fitting)
• Modernized stainless steel snap-in mounting • Optional delivery in dimmable version
The light fitting resists dust, humidity and washing clips – easy attachment to a track lighting • Certificates: ESČ, ENEC, CB, HACCP
with spouting water up to 80 °C. The body and the system with a width of 60 mm
diffuser made of PC material have high mechanical • External terminal strip makes it easy to
resistance against impact and deformation. connect the supply cable – PLUG and PLAY
system
An external terminal strip makes it easy and
quick to connect the supply cable with no need to up to up to

open the fitting (PLUG and PLAY system). LED

50ºC -25ºC

CRI
Emissions in the environment of use may reduce the 220-240 V DALI L 90
>80 B 10
usability of the plastics; for more information see
page 325.
HACCP

CZECH LIGHT FITTINGS 77

 INNOVA NB PC

INNOVA NB P C
TECHNICAL DESCRIPTION
• Light fitting protection: IP66 / IP69 • Ventilation membrane in the base eliminating
• Maximum ambient temperature: ta = 45 °C vacuum and condensate build-up
• Lifetime: 50 000 hours / L90B10 • 3 or 5-pole external terminal strip, conductor
• Maximum light fitting efficiency: 150 lm/W cross-sectional area: 1.5 or 2.5 mm2
• CRI > 80: 4000 K – standard • Fittings may be lined with zero distance
• CRI > 80: 3000 K, 5000 K, 6500 K - on request between themOptional constant luminous flux
• CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K (CLO) in DALI version
- on request • Electric equipment: LED modules, fixed output
• MacAdam = 3 SDCM driver or DALI driver
• Diffuser: transparent PC with Fresnel lenses, • The package includes: stainless hooks and
Narrow Beam (high mechanical resistance, stainless brackets
UV stability) • The values stated for power consumption and
• Body: grey PC (high mechanical resistance, luminous flux are in a tolerance of ± 7,5 %
UV stability)
• Snap-in mounting clips: made of stainless
steel and allowing easy attachment to a track
lighting system with a width of 60 mm

INNOVA NB 1.5ft
A 150° 180° 150°

D 120° 120°

variable mounting pitch 118 90

90° 90°

106
93
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
Up to ambient temperature ta = 45 °C - body: grey polycarbonate - diffuser with Fresnel lenses, NB (Narrow Beam), transparent polycarbonate
INNOVA 1.4ft NB PC 4400/840 45 4350 3780 27 140 1,5 1175 420 - 700
INNOVA 1.4ft NB PC 6400/840 45 6260 5450 38 143 1,5 1175 420 - 700
INNOVA 1.5ft NB PC 5500/840 45 5420 4720 33 143 1,8 1455 700 - 980
INNOVA 1.5ft NB PC 8000/840 45 7740 6730 45 150 1,8 1455 700 - 980

INNOVA NB Diffuser with Fresnel lenses, Narrow Beam, transparent polycarbonate

Type 1x3P 1x5P DALI 1x5P 2x3P 2x5P DALI 2x5P

INNOVA 1.4ft NB PC 4400/840... 72211 72212 72213 72215 72216 72217
INNOVA 1.4ft NB PC 6400/840... 72221 72222 72223 72225 72226 72227
INNOVA 1.5ft NB PC 5500/840... 72231 72232 72233 72235 72236 72237
INNOVA 1.5ft NB PC 8000/840... 72241 72242 72243 72245 72246 72247

Example of type marking: 72223 = INNOVA 1.4ft NB PC 6400/840 DALI 1x5P

LEGEND
1x3P - a version featuring a non-dimmable ballast and a single 3-pole external terminal strip
1x5P - a version featuring a non-dimmable ballast and a single 5-pole external terminal strip
DALI 1x5P - a version featuring a digitally dimmable ballast and a single 5-pole external terminal strip

2x3P - a version featuring a non-dimmable ballast, two 3-pole external terminal strips and 3-wire connecting cables (1F), for continuous row installation
2x5P - a version featuring a non-dimmable ballast, two 5-pole external terminal strips and 5-wire connecting cables (3F), for continuous row installation
DALI 2x5P - a version featuring a digitally dimmable ballast, two 5-pole external terminal strips and 5-wire connecting cables (DALI 1F), for continuous row installation

78
 INNOVA NB PC

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) To be attached to a track lighting system with a width of 60 mm using stainless steel snap-in mounting clips
d) Attachment with the use of side hangers to the wall

VARIABLE INSTALLATION PITCH

MINIMUM MAXIMUM

LIGHT FITTING INTERCONNECTION

An external terminal strip is used to ensure the supply cable can easily and quickly be connected with no need to open the light fixture (PLUG and PLAY system)

Interconnection of light fittings without spacing

LIGHT FITTING DETAILED VIEW

INNOVA NB

CZECH LIGHT FITTINGS 79

 INNOVA WB

… impact-resistant, for areas with low ceilings of 2.5 – 5 m.

USE ADVANTAGES
Closed and non-dismountable light fitting according • Light fitting protection IP66 / IP69 • Optional arrangement of light fittings in line
to the standard ČSN EN 60598-1 part 4 with Wide • High temperature resistance in a range from without gaps
Beam optics, suitable for inside and outside spaces ta = -25 °C to ta = 50 °C • Fully automatic 100% control of functionality
(even without shelter), intended for suspension • Lifetime: 50 000 hours / L90B10 and tightness (leak test) during production
height from 2.5 to 5 m, e.g.: production premises, • High mechanical resistance IK10 • Easy cleaning and maintenance without need
parking buildings and garages, workshops, cel- • Wide Beam (WB), ceiling height 2.5 to 5 m of replacing the light sources
lars, pedestrian underpasses and underground • Variable suspension pitch; optional instal- • Eliminated risk of mechanical and electro-
rooms with low ceilings. The structural design of lation of light fitting even on an existing static damage to LED chips
the light fitting (IP69) allows even placement in food- structure on which the original light fittings • Optional throughwiring (up to 5 wires inside
processing industry - HACCP. were suspended the light fitting)
• Modernized stainless steel snap-in mounting • Optional delivery in dimmable version
The light fitting resists dust, humidity and washing clips – easy attachment to a track lighting • Certificates: ESČ, ENEC, CB, HACCP
with spouting water up to 80 °C. The body and the system with a width of 60 mm
diffuser made of PC material have high mechanical • External terminal strip makes it easy to
resistance against impact and deformation. connect the supply cable – PLUG and PLAY
system
An external terminal strip makes it easy and
quick to connect the supply cable with no need to up to up to

open the fitting (PLUG and PLAY system). LED

50ºC -25ºC

CRI
Emissions in the environment of use may reduce the 220-240 V DALI L 90
>80 B 10
usability of the plastics; for more information see
page 325.
HACCP

80
 INNOVA WB PC

INNOVA WB P C
TECHNICAL DESCRIPTION
• Light fitting protection: IP66 / IP69 • Ventilation membrane in the base eliminating
• Maximum ambient temperature: ta = 50 °C vacuum and condensate build-up
• Lifetime: 50 000 hours / L90B10 • 3 or 5-pole external terminal strip, conductor
• Maximum light fitting efficiency: 150 lm/W cross-sectional area: 1.5 or 2.5 mm2
• CRI > 80: 4000 K – standard • Fittings may be lined with zero distance
• CRI > 80: 3000 K, 5000 K, 6500 K - on request between them
• CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K • Optional constant luminous flux (CLO) in DALI
- on request version
• MacAdam = 3 SDCM • Electric equipment: LED modules, fixed output
• Diffuser: transparent PC with Fresnel lenses, driver or DALI driver
Wide Beam (high mechanical resistance, • The package includes: stainless hooks and
UV stability) stainless brackets
• Body: grey PC (high mechanical resistance, • The values stated for power consumption and
UV stability) luminous flux are in a tolerance of ± 7,5 %
• Snap-in mounting clips: made of stainless
steel and allowing easy attachment to a track
lighting system with a width of 60 mm

INNOVA WB 1.5ft
A 150° 180° 150°

D 120° 120°

variable mounting pitch 118 90

90° 90°

106
93
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
Up to ambient temperature ta = 50 °C - body: grey polycarbonate - diffuser with Fresnel lenses, WB (Wide Beam), transparent polycarbonate
INNOVA 1.4ft WB PC 2600/840 50 2580 2240 16 140 1,5 1175 420 - 700
INNOVA 1.4ft WB PC 3200/840 50 3110 2710 20 136 1,5 1175 420 - 700
INNOVA 1.4ft WB PC 4400/840 45 4350 3780 27 140 1,5 1175 420 - 700
INNOVA 1.4ft WB PC 6400/840 45 6260 5450 38 143 1,5 1175 420 - 700
INNOVA 1.5ft WB PC 3250/840 50 3240 2820 20 141 1,8 1455 700 - 980
INNOVA 1.5ft WB PC 4000/840 50 3880 3380 24 141 1,8 1455 700 - 980
INNOVA 1.5ft WB PC 5500/840 45 5420 4720 33 143 1,8 1455 700 - 980
INNOVA 1.5ft WB PC 8000/840 45 7740 6730 45 150 1,8 1455 700 - 980

INNOVA WB Diffuser with Fresnel lenses, Wide Beam, transparent polycarbonate

Type 1x3P 1x5P DALI 1x5P 2x3P 2x5P DALI 2x5P

INNOVA 1.4ft WB PC 2600/840... 72311 72312 72313 72315 72316 72317
INNOVA 1.4ft WB PC 3200/840... 72321 72322 72323 72325 72326 72327
INNOVA 1.4ft WB PC 4400/840... 72331 72332 72333 72335 72336 72337
INNOVA 1.4ft WB PC 6400/840... 72341 72342 72343 72345 72346 72347
INNOVA 1.5ft WB PC 3250/840... 72351 72352 72353 72355 72356 72357
INNOVA 1.5ft WB PC 4000/840... 72361 72362 72363 72365 72366 72367
INNOVA 1.5ft WB PC 5500/840... 72371 72372 72373 72375 72376 72377
INNOVA 1.5ft WB PC 8000/840... 72381 72382 72383 72385 72386 72387

Example of type marking: 72343 = INNOVA 1.4ft WB PC 6400/840 DALI 1x5P

LEGEND
1x3P - a version featuring a non-dimmable ballast and a single 3-pole external terminal strip
1x5P - a version featuring a non-dimmable ballast and a single 5-pole external terminal strip
DALI 1x5P - a version featuring a digitally dimmable ballast and a single 5-pole external terminal strip

2x3P - a version featuring a non-dimmable ballast, two 3-pole external terminal strips and 3-wire connecting cables (1F), for continuous row installation
2x5P - a version featuring a non-dimmable ballast, two 5-pole external terminal strips and 5-wire connecting cables (3F), for continuous row installation
DALI 2x5P - a version featuring a digitally dimmable ballast, two 5-pole external terminal strips and 5-wire connecting cables (DALI 1F), for continuous row installation

CZECH LIGHT FITTINGS 81

 INNOVA WB PC

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) To be attached to a track lighting system with a width of 60 mm using stainless steel snap-in mounting clips
d) Attachment with the use of side hangers to the wall

VARIABLE INSTALLATION PITCH

MINIMUM MAXIMUM

LIGHT FITTING INTERCONNECTION

An external terminal strip is used to ensure the supply cable can easily and quickly be connected with no need to open the light fixture (PLUG and PLAY system)

Interconnection of light fittings without spacing

LIGHT FITTING DETAILED VIEW

INNOVA WB

82
INNOVA ABS

… dustproof, waterproof and chemically resistant.

USE ADVANTAGES
Closed and non-dismountable light fitting accord- • Light fitting protection IP66 / IP69 • Optional arrangement of light fittings in line
ing to the standard ČSN EN 60598-1 part 4 intended • High temperature resistance in a range from without gaps
for chemically challenging or agricultural premises ta = -25 °C to ta = 50 °C • Fully automatic 100% control of functionality
with incidence of vapours like ammonia, lye, alkaline • Lifetime: 50 000 hours / L90B10 and tightness (leak test) during production
compounds and hot water (hydrolysis). The light fit- • High chemical resistance • Easy cleaning and maintenance without need
ting is suitable particularly for agricultural and in- • Variable suspension pitch; optional installa- of replacing the light sources
dustrial buildings like farms, stables, production tion of light fitting even on an existing struc- • Eliminated risk of mechanical and electro-
and warehouse premises, car wash units and labo- ture on which the original light fittings were static damage to LED chips
ratories without explosion hazard. The structural suspended • Optional throughwiring (up to 5 wires inside
design of the light fitting (IP69) allows even place- • Modernized stainless steel snap-in mounting the light fitting)
ment in food-processing industry - HACCP. clips – easy attachment to a track lighting • Optional delivery in dimmable version
system with a width of 60 mm • Certificates: ESČ, ENEC, CB, DLG, HACCP
The light fitting resists dust, humidity and washing • External terminal strip makes it easy to
with spouting water up to 80 °C. The body and the connect the supply cable – PLUG and PLAY
diffuser made of ABS material have high chemical system
resistance.

An external terminal strip makes it easy and up to up to

quick to connect the supply cable with no need to LED

50ºC -25ºC
open the fitting (PLUG and PLAY system).
CRI
220-240 V DALI L 90
>80 B 10
Emissions in the environment of use may reduce the
usability of the plastics; for more information see
page č. 325. HACCP

CZECH LIGHT FITTINGS 83

 INNOVA ABS

INNOVA ABS
TECHNICAL DESCRIPTION
• Light fitting protection: IP66 / IP69 • Ventilation membrane in the base eliminating
• Maximum ambient temperature: ta = 50 °C vacuum and condensate build-up
• Lifetime: 50 000 hours / L90B10 • 3 or 5-pole external terminal strip, conductor
• Maximum light fitting efficiency: 160 lm/W cross-sectional area: 1.5 or 2.5 mm2
• CRI > 80: 4000 K – standard • Fittings may be lined with zero distance
• CRI > 80: 3000 K, 5000 K, 6500 K - on request between them
• CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K • Optional constant luminous flux (CLO) in DALI
- on request version
• MacAdam = 3 SDCM • Electric equipment: LED modules, fixed output
• Diffuser: translucent ABS (high chemical driver or DALI driver
resistance, UV stability) • The package includes: stainless hooks and
• Body: dark grey ABS (high chemical resistance, stainless brackets
UV stability) • The values stated for power consumption and
• Snap-in mounting clips: made of stainless luminous flux are in a tolerance of ± 7,5 %
steel and allowing easy attachment to a track
lighting system with a width of 60 mm

INNOVA ABS 1.5ft

A 150° 180° 150°

D 120° 120°

variable mounting pitch 118 90

90° 90°

106
93
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
Up to ambient temperature ta = 50 °C - body: dark grey ABS - diffuser: translucent ABS
INNOVA 1.4ft ABS 2600/840 50 2580 2400 16 150 1,5 1175 420 - 700
INNOVA 1.4ft ABS 3200/840 50 3110 2890 20 145 1,5 1175 420 - 700
INNOVA 1.4ft ABS 4400/840 45 4350 4050 27 150 1,5 1175 420 - 700
INNOVA 1.4ft ABS 6400/840 45 6260 5820 38 153 1,5 1175 420 - 700
INNOVA 1.4ft ABS 8800/840 40 8710 8100 51 159 1,6 1175 420 - 700
INNOVA 1.5ft ABS 3250/840 50 3240 3010 20 151 1,8 1455 700 - 980
INNOVA 1.5ft ABS 4000/840 50 3880 3610 24 150 1,8 1455 700 - 980
INNOVA 1.5ft ABS 5500/840 45 5420 5040 33 153 1,8 1455 700 - 980
INNOVA 1.5ft ABS 8000/840 45 7740 7200 45 160 1,8 1455 700 - 980
INNOVA 1.5ft ABS 11000/840 40 12050 11210 71 158 1,9 1455 700 - 980

INNOVA 1.4ft ABS 3200/840 = suitable replacement for tube light fitting PRIMA 136 ABS – 1 × 36 W
INNOVA 1.4ft ABS 6400/840 = suitable replacement for tube light fitting PRIMA 236 ABS – 2 × 36 W
INNOVA 1.5ft ABS 4000/840 = suitable replacement for tube light fitting PRIMA 158 ABS – 1 × 58 W
INNOVA 1.5ft ABS 8000/840 = suitable replacement for tube light fitting PRIMA 258 ABS – 2 × 58 W

INNOVA ABS Diffuser from translucent ABS

Type 1x3P 1x5P DALI 1x5P 2x3P 2x5P DALI 2x5P

INNOVA 1.4ft ABS 2600/840... 72411 72412 72413 72415 72416 72417
INNOVA 1.4ft ABS 3200/840... 72421 72422 72423 72425 72426 72427
INNOVA 1.4ft ABS 4400/840... 72431 72432 72433 72435 72436 72437
INNOVA 1.4ft ABS 6400/840... 72441 72442 72443 72445 72446 72447
INNOVA 1.4ft ABS 8800/840... 72401 72402 72403 72405 72406 72407
INNOVA 1.5ft ABS 3250/840... 72451 72452 72453 72455 72456 72457
INNOVA 1.5ft ABS 4000/840... 72461 72462 72463 72465 72466 72467
INNOVA 1.5ft ABS 5500/840... 72471 72472 72473 72475 72476 72477
INNOVA 1.5ft ABS 8000/840... 72481 72482 72483 72485 72486 72487
INNOVA 1.5ft ABS 11000/840... 72491 72492 72493 72495 72496 72497

LEGEND
1x3P - a version featuring a non-dimmable ballast and a single 3-pole external terminal strip
1x5P - a version featuring a non-dimmable ballast and a single 5-pole external terminal strip
DALI 1x5P - a version featuring a digitally dimmable ballast and a single 5-pole external terminal strip

2x3P - a version featuring a non-dimmable ballast, two 3-pole external terminal strips and 3-wire connecting cables (1F), for continuous row installation
2x5P - a version featuring a non-dimmable ballast, two 5-pole external terminal strips and 5-wire connecting cables (3F), for continuous row installation
DALI 2x5P - a version featuring a digitally dimmable ballast, two 5-pole external terminal strips and 5-wire connecting cables (DALI 1F), for continuous row installation

84
 INNOVA ABS

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) To be attached to a track lighting system with a width of 60 mm using stainless steel snap-in mounting clips
d) Attachment with the use of side hangers to the wall

VARIABLE INSTALLATION PITCH

MINIMUM MAXIMUM

LIGHT FITTING INTERCONNECTION

An external terminal strip is used to ensure the supply cable can easily and quickly be connected with no need to open the light fixture (PLUG and PLAY system)

Interconnection of light fittings without spacing

LIGHT FITTING DETAILED VIEW

INNOVA ABS

CZECH LIGHT FITTINGS 85

 INNOVA NB ABS

… chemically resistant, for areas with high ceilings of 8 – 12 m.

USE ADVANTAGES
Closed and non-dismountable light fitting according • Light fitting protection IP66 / IP69 • Optional arrangement of light fittings in line
to the standard ČSN EN 60598-1 part 4 intended for • High temperature resistance in a range from without gaps
chemically challenging or agricultural premises with ta = -25 °C to ta = 45 °C • Fully automatic 100% control of functionality
incidence of vapours like ammonia, lye, alkaline com- • Lifetime: 50 000 hours / L90B10 and tightness (leak test) during production
pounds and hot water (hydrolysis). Thanks to the Nar- • High chemical resistance • Easy cleaning and maintenance without need
row Beam optics, it is suitable for inside spaces with • Narrow Beam (NB), ceiling height 8 to 12 m of replacing the light sources
high ceilings, intended for suspension height from 8 • Variable suspension pitch; optional instal- • Eliminated risk of mechanical and electro-
to 12 m, e.g. inside walls and corridors of high ag- lation of light fitting even on an existing static damage to LED chips
ricultural and industrial buildings, rack aisles in structure on which the original light fittings • Optional throughwiring (up to 5 wires inside
production and storage spaces, farms, stables and were suspended the light fitting)
laboratories without explosion hazard. The structur- • Modernized stainless steel snap-in mounting • Optional delivery in dimmable version
al design of the light fitting (IP69) allows even place- clips – easy attachment to a track lighting • Certificates: ESČ, ENEC, CB, DLG, HACCP
ment in food-processing industry - HACCP. system with a width of 60 mm
• External terminal strip makes it easy to
The light fitting resists dust, humidity and washing connect the supply cable – PLUG and PLAY
with spouting water up to 80  °C. The body and the system
diffuser made of ABS material have high chemical
resistance.

An external terminal strip makes it easy and up to up to

quick to connect the supply cable with no need to LED
45ºC -25ºC
open the fitting (PLUG and PLAY system).
CRI
220-240 V DALI L 90
>80 B 10
Emissions in the environment of use may reduce the
usability of the plastics; for more information see
page 325. HACCP

86
 INNOVA NB ABS

INNOVA NB ABS
TECHNICAL DESCRIPTION
• Light fitting protection: IP66 / IP69 • Ventilation membrane in the base eliminating
• Maximum ambient temperature: ta = 45 °C vacuum and condensate build-up
• Lifetime: 50 000 hours / L90B10 • 3 or 5-pole external terminal strip, conductor
• Maximum light fitting efficiency: 151 lm/W cross-sectional area: 1.5 or 2.5 mm2
• CRI > 80: 4000 K – standard • Fittings may be lined with zero distance
• CRI > 80: 3000 K, 5000 K, 6500 K - on request between them
• CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K • Optional constant luminous flux (CLO) in DALI
- on request version
• MacAdam = 3 SDCM • Electric equipment: LED modules, fixed output
• Diffuser: transparent ABS with Fresnel lenses, driver or DALI driver
Narrow Beam (high chemical resistance, UV • The package includes: stainless hooks and
stability) stainless brackets
• Body: dark grey ABS (high chemical resistance, • The values stated for power consumption and
UV stability) luminous flux are in a tolerance of ± 7,5 %
• Snap-in mounting clips: made of stainless
steel and allowing easy attachment to a track
lighting system with a width of 60 mm

INNOVA NB ABS 1.5ft

A 150° 180° 150°

D 120° 120°

variable mounting pitch 118 90

90° 90°

106
93
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
Up to ambient temperature ta = 45 °C - body: dark grey ABS - diffuser with Fresnel lenses, NB (Narrow Beam), transparent ABS
INNOVA 1.4ft NB ABS 4400/840 45 4350 3830 27 142 1,5 1175 420 - 700
INNOVA 1.4ft NB ABS 6400/840 45 6260 5510 38 145 1,5 1175 420 - 700
INNOVA 1.5ft NB ABS 5500/840 45 5420 4770 33 145 1,8 1455 700 - 980
INNOVA 1.5ft NB ABS 8000/840 45 7740 6810 45 151 1,8 1455 700 - 980

INNOVA NB ABS Diffuser with Fresnel lenses, Narrow Beam, transparent ABS

Type 1x3P 1x5P DALI 1x5P 2x3P 2x5P DALI 2x5P

INNOVA 1.4ft NB ABS 4400/840... 72511 72512 72513 72515 72516 72517
INNOVA 1.4ft NB ABS 6400/840... 72521 72522 72523 72525 72526 72527
INNOVA 1.5ft NB ABS 5500/840... 72531 72532 72533 72535 72536 72537
INNOVA 1.5ft NB ABS 8000/840... 72541 72542 72543 72545 72546 72547

Example of type marking: 72523 = INNOVA 1.4ft NB ABS 6400/840 DALI 1x5P

LEGEND
1x3P - a version featuring a non-dimmable ballast and a single 3-pole external terminal strip
1x5P - a version featuring a non-dimmable ballast and a single 5-pole external terminal strip
DALI 1x5P - a version featuring a digitally dimmable ballast and a single 5-pole external terminal strip

2x3P - a version featuring a non-dimmable ballast, two 3-pole external terminal strips and 3-wire connecting cables (1F), for continuous row installation
2x5P - a version featuring a non-dimmable ballast, two 5-pole external terminal strips and 5-wire connecting cables (3F), for continuous row installation
DALI 2x5P - a version featuring a digitally dimmable ballast, two 5-pole external terminal strips and 5-wire connecting cables (DALI 1F), for continuous row installation

CZECH LIGHT FITTINGS 87

 INNOVA NB ABS

Light fitting attachment

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) To be attached to a track lighting system with a width of 60 mm using stainless steel snap-in mounting clips
d) Attachment with the use of side hangers to the wall

VARIABLE INSTALLATION PITCH

MINIMUM MAXIMUM

LIGHT FITTING INTERCONNECTION

An external terminal strip is used to ensure the supply cable can easily and quickly be connected with no need to open the light fixture (PLUG and PLAY system)

Interconnection of light fittings without spacing

LIGHT FITTING DETAILED VIEW

INNOVA NB ABS

88
INNOVA WB ABS

… chemically resistant, for areas with low ceilings of 2.5 – 5 m.

USE ADVANTAGES
Closed and non-dismountable light fitting accord- • Light fitting protection IP66 / IP69 • Optional arrangement of light fittings in line
ing to the standard ČSN EN 60598-1 part 4 intended • High temperature resistance in a range from without gaps
for chemically challenging or agricultural premises ta = -25 °C to ta = 50 °C • Fully automatic 100% control of functionality
with incidence of vapours like ammonia, lye, alkaline • Lifetime: 50 000 hours / L90B10 and tightness (leak test) during production
compounds and hot water (hydrolysis). Thanks to the • High chemical resistance • Easy cleaning and maintenance without need
Wide Beam optics it is suitable for inside spaces with • Wide Beam (WB), ceiling height 2.5 to 5 m of replacing the light sources
low ceilings, intended for suspension height from • Variable suspension pitch; optional instal- • Eliminated risk of mechanical and electro-
2.5 to 5 m, e.g. inside walls and corridors of low lation of light fitting even on an existing static damage to LED chips
agricultural and industrial buildings, workshops, structure on which the original light fittings • Optional throughwiring (up to 5 wires inside
corridors, cellars, farms, stables and laboratories were suspended the light fitting)
without explosion hazard. The structural design of • Modernized stainless steel snap-in mounting • Optional delivery in dimmable version
the light fitting (IP69) allows even placement in food- clips – easy attachment to a track lighting • Certificates: ESČ, ENEC, CB, DLG, HACCP
processing industry - HACCP. system with a width of 60 mm
• External terminal strip makes it easy to
The light fitting resists dust, humidity and washing connect the supply cable – PLUG and PLAY
with spouting water up to 80 °C. The body and the system
diffuser made of ABS material have high chemical
resistance.

An external terminal strip makes it easy and up to up to

LED
quick to connect the supply cable with no need to 50ºC -25ºC

open the fitting (PLUG and PLAY system). 220-240 V DALI CRI
L 90
>80 B 10
Emissions in the environment of use may reduce the
usability of the plastics; for more information see HACCP
page 325.

CZECH LIGHT FITTINGS 89

 INNOVA WB ABS

INNOVA WB ABS
TECHNICAL DESCRIPTION
• Light fitting protection: IP66 / IP69 • Ventilation membrane in the base eliminating
• Maximum ambient temperature: ta = 50 °C vacuum and condensate build-up
• Lifetime: 50 000 hours / L90B10 • 3 or 5-pole external terminal strip, conductor
• Maximum light fitting efficiency: 151 lm/W cross-sectional area: 1.5 or 2.5 mm2
• CRI > 80: 4000 K – standard • Fittings may be lined with zero distance
• CRI > 80: 3000 K, 5000 K, 6500 K - on request between them
• CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K • Optional constant luminous flux (CLO) in DALI
- on request version
• MacAdam = 3 SDCM • Electric equipment: LED modules, fixed output
• Diffuser: transparent ABS with Fresnel lenses, driver or DALI driver
Wide Beam (high chemical resistance, UV • The package includes: stainless hooks and
stability) stainless brackets
• Body: dark grey ABS (high chemical resistance, • The values stated for power consumption and
UV stability) luminous flux are in a tolerance of ± 7,5 %
• Snap-in mounting clips: made of stainless
steel and allowing easy attachment to a track
lighting system with a width of 60 mm

INNOVA WB ABS 1.5ft

A 150° 180° 150°

D 120° 120°

variable mounting pitch 118 90

90° 90°

106
93
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
Up to ambient temperature ta = 50 °C - body: dark grey ABS - diffuser with Fresnel lenses, WB (Wide Beam), transparent ABS
INNOVA 1.4ft WB ABS 2600/840 50 2580 2270 16 142 1,5 1175 420 - 700
INNOVA 1.4ft WB ABS 3200/840 50 3110 2740 20 137 1,5 1175 420 - 700
INNOVA 1.4ft WB ABS 4400/840 45 4350 3830 27 142 1,5 1175 420 - 700
INNOVA 1.4ft WB ABS 6400/840 45 6260 5510 38 145 1,5 1175 420 - 700
INNOVA 1.5ft WB ABS 3250/840 50 3240 2850 20 143 1,8 1455 700 - 980
INNOVA 1.5ft WB ABS 4000/840 50 3880 3410 24 142 1,8 1455 700 - 980
INNOVA 1.5ft WB ABS 5500/840 45 5420 4770 33 145 1,8 1455 700 - 980
INNOVA 1.5ft WB ABS 8000/840 45 7740 6810 45 151 1,8 1455 700 - 980

INNOVA WB ABS Diffuser with Fresnel lenses, Wide Beam, transparent ABS

Type 1x3P 1x5P DALI 1x5P 2x3P 2x5P DALI 2x5P

INNOVA 1.4ft WB ABS 2600/840... 72611 72612 72613 72615 72616 72617
INNOVA 1.4ft WB ABS 3200/840... 72621 72622 72623 72625 72626 72627
INNOVA 1.4ft WB ABS 4400/840... 72631 72632 72633 72635 72636 72637
INNOVA 1.4ft WB ABS 6400/840... 72641 72642 72643 72645 72646 72647
INNOVA 1.5ft WB ABS 3250/840... 72651 72652 72653 72655 72656 72657
INNOVA 1.5ft WB ABS 4000/840... 72661 72662 72663 72665 72666 72667
INNOVA 1.5ft WB ABS 5500/840... 72671 72672 72673 72675 72676 72677
INNOVA 1.5ft WB ABS 8000/840... 72681 72682 72683 72685 72686 72687

Example of type marking: 72643 = INNOVA 1.4ft WB ABS 6400/840 DALI 1x5P

LEGEND
1x3P - a version featuring a non-dimmable ballast and a single 3-pole external terminal strip
1x5P - a version featuring a non-dimmable ballast and a single 5-pole external terminal strip
DALI 1x5P - a version featuring a digitally dimmable ballast and a single 5-pole external terminal strip

2x3P - a version featuring a non-dimmable ballast, two 3-pole external terminal strips and 3-wire connecting cables (1F), for continuous row installation
2x5P - a version featuring a non-dimmable ballast, two 5-pole external terminal strips and 5-wire connecting cables (3F), for continuous row installation
DALI 2x5P - a version featuring a digitally dimmable ballast, two 5-pole external terminal strips and 5-wire connecting cables (DALI 1F), for continuous row installation

90
 INNOVA WB ABS

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) To be attached to a track lighting system with a width of 60 mm using stainless steel snap-in mounting clips
d) Attachment with the use of side hangers to the wall

VARIABLE INSTALLATION PITCH

MINIMUM MAXIMUM

LIGHT FITTING INTERCONNECTION

An external terminal strip is used to ensure the supply cable can easily and quickly be connected with no need to open the light fixture (PLUG and PLAY system)

Interconnection of light fittings without spacing

LIGHT FITTING DETAILED VIEW

INNOVA WB ABS

CZECH LIGHT FITTINGS 91

 INNOVA TRS

... for direct and indirect illumination.

USE ADVANTAGES
An enclosed, non-dismantable and fully transpar- • Light fitting protection IP66 / IP69 • Optional arrangement of light fittings in line
ent luminaire featuring a user non-replaceable • High temperature resistance in a range from without gaps
light source in accordance with ČSN EN 60598- ta = -25 °C to ta = 50 °C • Fully automatic 100% control of functionality
1(4). The fixture is a perfect choice for inside as • Lifetime: 50 000 hours / L90B10 and tightness (leak test) during production
well as outside spaces (roof and unroofed) with lu- • High mechanical resistance IK10 • Easy cleaning and maintenance without need
minaire installation height ranging from 2.5 m to • For direct and indirect lighting, ceiling height of replacing the light sources
5 m such as: production plants, (multistorey) car 2.5 to 5 m • Eliminated risk of mechanical and electro-
parks and garages, workshops, corridors, cel- • Variable suspension pitch; optional installation static damage to LED chips
lars, pedestrian underpasses and underground of light fitting even on an existing structure on • Optional throughwiring (up to 5 wires inside
spaces with low ceilings. The structural design which the original light fittings were suspended the light fitting)
of the light fitting (IP69) allows even placement in • Modernized stainless steel snap-in mounting • Optional delivery in dimmable version
food-processing industry - HACCP. clips – easy attachment to a track lighting • Certificates: ESČ, CB, HACCP
system with a width of 60 mm
The light fitting resists dust, humidity and washing • External terminal strip makes it easy to
with spouting water up to 80 °C. The body and the connect the supply cable – PLUG and PLAY
diffuser made of PC material have high mechani-
system
cal resistance against impact and deformation.
up to up to
An external terminal strip makes it easy and quick
LED
to connect the supply cable with no need to open 50ºC -25ºC

the fitting (PLUG and PLAY system). 220-240 V DALI CRI

L 90
>80 B 10
Emissions in the environment of use may reduce the
usability of the plastics see page č. 325. HACCP

92
 INNOVA TRS PC

INNOVA TRS P C
TECHNICAL DESCRIPTION
• Light fitting protection: IP66 / IP69 • Ventilation membrane in the base eliminating
• Maximum ambient temperature: ta = 50 °C vacuum and condensate build-up
• Lifetime: 50 000 hours / L90B10 • 3 or 5-pole external terminal strip, conductor
• Maximum light fitting efficiency: 150 lm/W cross-sectional area: 1.5 or 2.5 mm2
• CRI > 80: 4000 K – standard • Fittings may be lined with zero distance be-
• CRI > 80: 3000 K, 5000 K, 6500 K - on request tween them
• CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K • Optional constant luminous flux (CLO) in DALI
- on request version
• MacAdam = 3 SDCM • Electric equipment: LED modules, fixed output
• Diffuser: transparent PC (high mechanical re- driver or DALI driver
sistance, UV stability) • The package includes: stainless hooks and
• Body: transparent PC (high mechanical resist- stainless brackets, a connector’s counterpart (if
ance, UV stability) no cables are ordered)
• Reflector: modified for indirect illumination • The values stated for power consumption and
• Snap-in mounting clips: made of stainless luminous flux are in a tolerance of ± 7,5 %
steel and allowing easy attachment to a track
lighting system with a width of 60 mm

INNOVA 1.5ft TRS

A 150° 180° 150°

D 120° 120°

variable mounting pitch 118 90

90° 90°

106
93
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
Up to ambient temperature ta = 50 °C - body: transparent polycarbonate - diffuser: transparent polycarbonate
INNOVA 1.4ft TRS PC 2600/840 50 2580 2240 16 140 1,5 1175 420 - 700
INNOVA 1.4ft TRS PC 3200/840 50 3110 2710 20 136 1,5 1175 420 - 700
INNOVA 1.4ft TRS PC 4400/840 45 4350 3780 27 140 1,5 1175 420 - 700
INNOVA 1.4ft TRS PC 6400/840 45 6260 5450 38 143 1,5 1175 420 - 700
INNOVA 1.5ft TRS PC 3250/840 50 3240 2820 20 141 1,8 1455 700 - 980
INNOVA 1.5ft TRS PC 4000/840 50 3880 3380 24 141 1,8 1455 700 - 980
INNOVA 1.5ft TRS PC 5500/840 45 5420 4720 33 143 1,8 1455 700 - 980
INNOVA 1.5ft TRS PC 8000/840 45 7740 6730 45 150 1,8 1455 700 - 980

INNOVA TRS Diffuser: transparent polycarbonate

Type 1x3P 1x5P DALI 1x5P 2x3P 2x5P DALI 2x5P

INNOVA 1.4ft TRS PC 2600/840… 16280 16281 16203 16205 16206 16207
INNOVA 1.4ft TRS PC 3200/840… 16211 16212 16213 16215 16216 16217
INNOVA 1.4ft TRS PC 4400/840… 16221 16222 16223 16225 16226 16227
INNOVA 1.4ft TRS PC 6400/840… 16231 16232 16233 16235 16236 16237
INNOVA 1.5ft TRS PC 3250/840… 16241 16242 16243 16245 16246 16247
INNOVA 1.5ft TRS PC 4000/840… 16251 16252 16253 16255 16256 16257
INNOVA 1.5ft TRS PC 5500/840… 16261 16262 16263 16265 16266 16267
INNOVA 1.5ft TRS PC 8000/840… 16271 16272 16273 16275 16276 16277

Example of type marking: 16233 = INNOVA 1.4ft TRS PC 6400/840 DALI 1x5P

LEGEND
1x3P - a version featuring a non-dimmable ballast and a single 3-pole external terminal strip
1x5P - a version featuring a non-dimmable ballast and a single 5-pole external terminal strip
DALI 1x5P - a version featuring a digitally dimmable ballast and a single 5-pole external terminal strip

2x3P - a version featuring a non-dimmable ballast, two 3-pole external terminal strips and 3-wire connecting cables (1F), for continuous row installation
2x5P - a version featuring a non-dimmable ballast, two 5-pole external terminal strips and 5-wire connecting cables (3F), for continuous row installation
DALI 2x5P - a version featuring a digitally dimmable ballast, two 5-pole external terminal strips and 5-wire connecting cables (DALI 1F), for continuous row installation

CZECH LIGHT FITTINGS 93

 INNOVA TRS PC

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) To be attached to a track lighting system with a width of 60 mm using stainless steel snap-in mounting clips
d) Attachment with the use of side hangers to the wall

VARIABLE INSTALLATION PITCH

MINIMUM MAXIMUM

LIGHT FITTING INTERCONNECTION

An external terminal strip is used to ensure the supply cable can easily and quickly be connected with no need to open the light fixture (PLUG and PLAY system)

Interconnection of light fittings without spacing

LIGHT FITTING DETAILED VIEW

INNOVA TRS

94
 INNOVA accessories

OM – protective grid
The metal grid protects the light fitting against mechanical damage and unauthorised handling. It is attached to the surface with the use of screws.
The surface is treated with the RAL 9003 powder-coated colour.

Weight
Code Type Description
[kg]
11942 OM 236 protective grid for Types 236, 228/254, x.4ft (1300 × 220 × 130 mm) 1,7
11943 OM 258 protective grid for Types 258, 235/249/280, x.5ft (1600 × 220 × 130 mm) 2,0

BZ – side hanger
It serves to attach the light fitting to the wall with the possibility of its positioning.

Weight
Code Type Description
[kg]
90002 BZ side hanger with blocking (set for 1 light fitting) 0,4

Canalis busbar system connector

The connector enables a quick 1 phase or 3 phase interconnection of light fittings without their opening.

Weight
Code Type Description
[kg]
79001 KBA 40 ZU light fitting suspension holder - Canalis KBA system 0,1
72971 KBC 10 CC212 three-pole connector with 1 m cable - Canalis KBA system 0,2
72972 KBC 10 CC213 five-pole connector with 1 m cable - Canalis KBA system 0,3

CZECH LIGHT FITTINGS 95

FUTURA

INDUSTRIAL
PLASTIC
DUSTPROOF
WATERPROOF
IMPACT-RESISTANT
 PRODUCT OVERVIEW

FUTURA – industrial plastic LED light fitting

FUTURA
page 98

IP66 FUTURA PC Al, FUTURA ES PC Al, FUTURA HE PC Al,

PCc Al PCc Al PCc Al
page 98 page 102 page 106

FUTURA
FOR OUTDOOR SPACES
page 109

IP66 FUTURA VP PC Al,

VP PCc Al
page 109

FUTURA
FOR HIGH CEILINGS
page 113

IP66 FUTURA NB PC Al,

PCc Al
page 113

FUTURA - CHEMICALLY
RESISTANT VERSION
page 116

IP66 FUTURA ABS Al, FUTURA ES ABS Al, FUTURA HE ABS Al,
ABSc Al ABSc Al ABSc Al
page 116 page 120 page 123

FUTURA
CLASS II INSULATION
S. 126

IP66 FUTURA CLASS II

S. 126

FUTURA FOR EXTREME

TEMPERATURES
page 130

IP66 FUTURA MAX PCc Al

page 130

FUTURA WITH
MOTION DETECTOR
page 133

IP66 FUTURA SNS PC Al,

PCc Al
page 133

FUTURA
ACCESSORIES
page 136

FUTURA
ACCESSORIES
page 136

www.bim.lighting/en

CZECH LIGHT FITTINGS 97

 FUTURA

... dustproof, waterproof and impact-resistant.

USE ADVANTAGES
The light fitting is suitable for industrial indoor • Light fitting protection IP66 • At request CRI > 80: 3000 K, 5000 K, 6500 K,
and outdoor roofed spaces, warehouses, sports • Maximum ambient temperature up to ta = 50 °C CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
areas, workshops, garages, transport terminals, • Lifetime: 50,000 hours / L90B10 • It can be delivered in dimmable or emergency
utility structures and laboratories without a dan- • Diffuser: translucent polycarbonate (PC) = high version
ger of explosion of gas, dust and combustible mechanical resistance •T  hrough-wiring of up to 10 wires at body
fumes. • Body: grey polycarbonate with Al coolers •C  ertification: ENEC, CB, HACCP
(PC Al) = high mechanical resistance
The light fitting is resistant to dust, moisture and • Up to 45 % lower electricity consumption when
spouting water. The body and the diffuser made compared to tubes T5
of polycarbonate (PC) have the increased resist- • In DALI version possibility of constant luminous
ance against deformation and impact. flux for whole lifetime (CLO)
• Constant luminous flux even in ambient tem-
(It is necessary to consider exhalation in the air perature of -25 °C
which can reduce the usability of the plastic and • Standard
 model - CRI > 80: 4000 K
aluminium at installations in an aggressive envi-
ronment, see also page 325).

up to up to
LED
50ºC -25ºC

CRI
220-240 V DALI L 90
>80 B 10

05 HACCP

98
 FUTURA PC Al, PCc Al

FUTURA P C Al, PCc Al

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 •R  eflector: steel sheet, white colour (RAL 9003)
• Maximum ambient temperature: ta = 50  °C, • Clips: polyamide + 15 % glass fibre or stainless
Maximum ambient temperature: ta = 0-25 °C steel + polyamide
(version with emergency back-up source for • Sealing: polyurethane (PUR), foamed body
1 or 3 hours; M1h, M3h) groove
• Maximum system efficacy: 161 lm/W •C  able glands: screwed PG 13.5
• The watt and lumen values can vary by ± 7,5 % •D  istance part: polyamide + 10 % glass fibre
• Standard model - CRI > 80: 4000 K • Terminal block: screwless, three-pole (basic
• MacAdam = 3 SDCM version)
• Lifetime: 50,000 hours / L90B10 • Installation: package contains stainless hooks
• Diffuser: translucent polycarbonate (PC), UV and stainless brackets
stable, impact-resistant • Electric equipment: LED modules, current driv-
• Body: grey polycarbonate with Al coolers (PC er or current driver DALI
Al), UV stable, impact-resistant

FUTURA 2.4ft
150° 180° 150°

A
120° 120°
D 145

90° 90°

111
100
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Code Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 50 °C - body: grey polycarbonate with Al coolers - diffuser: translucent polycarbonate
75010 FUTURA 2.2ft PC Al 2600/840 50 2630 2470 16 154 1,5 612 475
75020 FUTURA 2.2ft PC Al 3200/840 50 3110 2920 19 154 1,5 612 475
75030 FUTURA 2.2ft PC Al 4400/840 45 4390 4130 27 153 1,7 612 475
75040 FUTURA 2.4ft PC Al 5200/840 50 5150 4840 31 156 2,9 1172 700
75050 FUTURA 2.4ft PC Al 6400/840 50 6260 5880 37 159 2,9 1172 700
75060 FUTURA 2.4ft PC Al 8800/840 45 8710 8190 51 161 3,0 1172 700
75410 FUTURA 2.4ft PC Al 12800/840 35 14000 13160 84 157 3,0 1172 700
75070 FUTURA 2.5ft PC Al 6500/840 50 6380 6000 38 158 3,8 1452 940
75080 FUTURA 2.5ft PC Al 8000/840 50 7750 7290 46 158 3,9 1452 940
75090 FUTURA 2.5ft PC Al 11000/840 45 12050 11330 71 160 3,9 1452 940
75420 FUTURA 2.5ft PC Al 16000/840 35 17550 16500 104 159 3,9 1452 940

75020 FUTURA 2.2ft PC Al 3200/840 = suitable replacement for T8 fl. tube light fitting PRIMA 218 – 2 × 18 W
75050 FUTURA 2.4ft PC Al 6400/840 = suitable replacement for T8 fl. tube light fitting PRIMA 236 – 2 × 36 W
75080 FUTURA 2.5ft PC Al 8000/840 = suitable replacement for T8 fl. tube light fitting PRIMA 258 – 2 × 58 W

FUTURA PC Al Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

75010 FUTURA 2.2ft PC Al 2600/840 x x 75014 75015 x x
75020 FUTURA 2.2ft PC Al 3200/840 x x 75024 75025 x x
75030 FUTURA 2.2ft PC Al 4400/840 x x 75034 75035 x x
75040 FUTURA 2.4ft PC Al 5200/840 75140 75340 75044 75045 75344 75345
75050 FUTURA 2.4ft PC Al 6400/840 75150 75350 75054 75055 75354 75355
75060 FUTURA 2.4ft PC Al 8800/840 75160 75360 75064 75065 75364 75365
75410 FUTURA 2.4ft PC Al 12800/840 75411 75412 x x x x
75070 FUTURA 2.5ft PC Al 6500/840 75170 75370 75074 75075 75374 75375
75080 FUTURA 2.5ft PC Al 8000/840 75180 75380 75084 75085 75384 75385
75090 FUTURA 2.5ft PC Al 11000/840 75190 75390 75094 75095 75394 75395
75420 FUTURA 2.5ft PC Al 16000/840 75421 75422 x x x x

FUTURA PCc Al Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

75210 FUTURA 2.2ft PCc Al 2600/840 x x 75214 75215 x x
75220 FUTURA 2.2ft PCc Al 3200/840 x x 75224 75225 x x
75230 FUTURA 2.2ft PCc Al 4400/840 x x 75234 75235 x x
75240 FUTURA 2.4ft PCc Al 5200/840 75540 75640 75244 75245 75644 75645
75250 FUTURA 2.4ft PCc Al 6400/840 75550 75650 75254 75255 75654 75655
75260 FUTURA 2.4ft PCc Al 8800/840 75560 75660 75264 75265 75664 75665
75430 FUTURA 2.4ft PCc Al 12800/840 75431 75432 x x x x
75270 FUTURA 2.5ft PCc Al 6500/840 75570 75670 75274 75275 75674 75675
75280 FUTURA 2.5ft PCc Al 8000/840 75580 75680 75284 75285 75684 75685
75290 FUTURA 2.5ft PCc Al 11000/840 75590 75690 75294 75295 75694 75695
75440 FUTURA 2.5ft PCc Al 16000/840 75441 75442 x x x x

Example of type marking: 75665 = FUTURA 2.4ft PCc Al 8800/840 3F M3h

CZECH LIGHT FITTINGS 99

 FUTURA PC Al, PCc Al

FUTURA PC Al DALI Digital dimmable driver DALI - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

75013 FUTURA 2.2ft PC Al 2600/840 DALI x x 75017 75019 x x
75023 FUTURA 2.2ft PC Al 3200/840 DALI x x 75027 75029 x x
75033 FUTURA 2.2ft PC Al 4400/840 DALI x x 75037 75039 x x
75043 FUTURA 2.4ft PC Al 5200/840 DALI 75143 75343 75047 75049 75347 75349
75053 FUTURA 2.4ft PC Al 6400/840 DALI 75153 75353 75057 75059 75357 75359
75063 FUTURA 2.4ft PC Al 8800/840 DALI 75163 75363 75067 75069 75367 75369
75450 FUTURA 2.4ft PC Al 12800/840 DALI 75451 75452 x x x x
75073 FUTURA 2.5ft PC Al 6500/840 DALI 75173 75373 75077 75079 75377 75379
75083 FUTURA 2.5ft PC Al 8000/840 DALI 75183 75383 75087 75089 75387 75389
75093 FUTURA 2.5ft PC Al 11000/840 DALI 75193 75393 75097 75099 75397 75399
75460 FUTURA 2.5ft PC Al 16000/840 DALI 75461 75462 x x x x

FUTURA PCc Al DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

75213 FUTURA 2.2ft PCc Al 2600/840 DALI x x 75217 75219 x x
75223 FUTURA 2.2ft PCc Al 3200/840 DALI x x 75227 75229 x x
75233 FUTURA 2.2ft PCc Al 4400/840 DALI x x 75237 75239 x x
75243 FUTURA 2.4ft PCc Al 5200/840 DALI 75543 75643 75247 75249 75647 75649
75253 FUTURA 2.4ft PCc Al 6400/840 DALI 75553 75653 75257 75259 75657 75659
75263 FUTURA 2.4ft PCc Al 8800/840 DALI 75563 75663 75267 75269 75667 75669
75470 FUTURA 2.4ft PCc Al 12800/840 DALI 75471 75472 x x x x
75273 FUTURA 2.5ft PCc Al 6500/840 DALI 75573 75673 75277 75279 75677 75679
75283 FUTURA 2.5ft PCc Al 8000/840 DALI 75583 75683 75287 75289 75687 75689
75293 FUTURA 2.5ft PCc Al 11000/840 DALI 75593 75693 75297 75299 75697 75699
75480 FUTURA 2.5ft PCc Al 16000/840 DALI 75481 75482 x x x x

Example of type marking: 75687 = FUTURA 2.5ft PCc Al 8000/840 DALI 3F M1h

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

100
 FUTURA PC Al, PCc Al

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) Attachment with the use of side hangers to the wall

LIGHT FITTING DETAILED VIEW

FUTURA

CZECH LIGHT FITTINGS 101

 FUTURA ES

169
lm/W

... Energy Saver.

USE ADVANTAGES
The light fitting is suitable for industrial indoor • Light fitting protection IP66 • Standard model - CRI > 80: 4000 K
and outdoor roofed spaces, warehouses, sports • Maximum ambient temperature up to ta = 50 °C •A  t request CRI > 80: 3000 K, 5000 K, 6500 K
areas, workshops, garages, transport terminals, • Lifetime: 50,000 hours / L90B10 • It can be delivered in dimmable or emergency
utility structures and laboratories without a dan- • Diffuser: translucent polycarbonate (PC) = high version
ger of explosion of gas, dust and combustible mechanical resistance •T  hrough-wiring of up to 10 wires at body
fumes. • Body: grey polycarbonate with Al coolers •C  ertification: ENEC, CB, HACCP
(PC Al) = high mechanical resistance
The light fitting is resistant to dust, moisture and • Up to 50 % lower electricity consumption when
spouting water. The body and the diffuser made compared to tubes T5
of polycarbonate (PC) have the increased resist- • In DALI version possibility of constant luminous
ance against deformation and impact. flux for whole lifetime (CLO)
• Constant luminous flux even in ambient tem-
(It is necessary to consider exhalation in the air perature of -25 °C
which can reduce the usability of the plastic and
aluminium at installations in an aggressive envi-
ronment, see also page 325).

up to up to
LED
50ºC -25ºC

CRI
220-240 V DALI L 90
>80 B 10

05 HACCP

102
 FUTURA ES PC Al, PCc Al

FUTURA ES P C Al, PCc Al

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 •R  eflector: steel sheet, white colour (RAL 9003)
• Maximum ambient temperature: ta = 50  °C, • Clips: polyamide + 15 % glass fibre or stainless
Maximum ambient temperature: ta = 0-25 °C steel + polyamide
(version with emergency back-up source for • Sealing: polyurethane (PUR), foamed body
1 or 3 hours; M1h, M3h) groove
• Maximum system efficacy: 169 lm/W •C  able glands: screwed PG 13.5
• The watt and lumen values can vary by ± 7,5 % •D  istance part: polyamide + 10 % glass fibre
• Standard model - CRI > 80: 4000 K • Terminal block: screwless, three-pole (basic
• MacAdam = 3 SDCM version)
• Lifetime: 50,000 hours / L90B10 • Installation: package contains stainless hooks
• Diffuser: translucent polycarbonate (PC), UV and stainless brackets
stable, impact-resistant • Electric equipment: LED modules, current driv-
• Body: grey polycarbonate with Al coolers (PC er or current driver DALI
Al), UV stable, impact-resistant

FUTURA 2.4ft ES
150° 180° 150°

A
120° 120°
D 145

90° 90°

111
100
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Code Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 50 °C - body: grey polycarbonate with Al coolers - diffuser: translucent polycarbonate
10010 FUTURA 2.2ft ES PC Al 2600/840 50 2630 2470 16 154 1,5 612 475
10020 FUTURA 2.2ft ES PC Al 3200/840 50 3180 2990 19 157 1,5 612 475
10030 FUTURA 2.2ft ES PC Al 4400/840 45 4450 4180 27 155 1,7 612 475
10040 FUTURA 2.4ft ES PC Al 5200/840 50 5260 4940 31 159 2,9 1172 700
10050 FUTURA 2.4ft ES PC Al 6400/840 50 6310 5930 37 160 2,9 1172 700
10060 FUTURA 2.4ft ES PC Al 8800/840 45 8980 8440 51 165 3,0 1172 700
10070 FUTURA 2.4ft ES PC Al 12800/840 35 14280 13420 84 160 3,0 1172 700
10080 FUTURA 2.5ft ES PC Al 6500/840 50 6700 6300 38 166 3,8 1452 940
10090 FUTURA 2.5ft ES PC Al 8000/840 50 8100 7610 46 165 3,9 1452 940
10100 FUTURA 2.5ft ES PC Al 11000/840 45 12750 11990 71 169 3,9 1452 940
10110 FUTURA 2.5ft ES PC Al 16000/840 35 17860 16790 104 161 3,9 1452 940

10020 FUTURA 2.2ft ES PC Al 3200/840 = suitable replacement for T8 fl. tube light fitting PRIMA 218 – 2 × 18 W
10050 FUTURA 2.4ft ES PC Al 6400/840 = suitable replacement for T8 fl. tube light fitting PRIMA 236 – 2 × 36 W
10090 FUTURA 2.5ft ES PC Al 8000/840 = suitable replacement for T8 fl. tube light fitting PRIMA 258 – 2 × 58 W

FUTURA ES PC Al Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

10010 FUTURA 2.2ft ES PC Al 2600/840 x x 10014 10015 x x
10020 FUTURA 2.2ft ES PC Al 3200/840 x x 10024 10025 x x
10030 FUTURA 2.2ft ES PC Al 4400/840 x x 10034 10035 x x
10040 FUTURA 2.4ft ES PC Al 5200/840 10041 10043 10044 10045 10046 10047
10050 FUTURA 2.4ft ES PC Al 6400/840 10051 10053 10054 10055 10056 10057
10060 FUTURA 2.4ft ES PC Al 8800/840 10061 10063 10064 10065 10066 10067
10070 FUTURA 2.4ft ES PC Al 12800/840 10071 10073 x x x x
10080 FUTURA 2.5ft ES PC Al 6500/840 10081 10083 10084 10085 10086 10087
10090 FUTURA 2.5ft ES PC Al 8000/840 10091 10093 10094 10095 10096 10097
10100 FUTURA 2.5ft ES PC Al 11000/840 10101 10103 10104 10105 10106 10107
10110 FUTURA 2.5ft ES PC Al 16000/840 10111 10113 x x x x

FUTURA ES PCc Al Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

10120 FUTURA 2.2ft ES PCc Al 2600/840 x x 10124 10125 x x
10130 FUTURA 2.2ft ES PCc Al 3200/840 x x 10134 10135 x x
10140 FUTURA 2.2ft ES PCc Al 4400/840 x x 10144 10145 x x
10150 FUTURA 2.4ft ES PCc Al 5200/840 10151 10153 10154 10155 10156 10157
10160 FUTURA 2.4ft ES PCc Al 6400/840 10161 10163 10164 10165 10166 10167
10170 FUTURA 2.4ft ES PCc Al 8800/840 10171 10173 10174 10175 10176 10177
10180 FUTURA 2.4ft ES PCc Al 12800/840 10181 10183 x x x x
10190 FUTURA 2.5ft ES PCc Al 6500/840 10191 10193 10194 10195 10196 10197
10200 FUTURA 2.5ft ES PCc Al 8000/840 10201 10203 10204 10205 10206 10207
10210 FUTURA 2.5ft ES PCc Al 11000/840 10211 10213 10214 10215 10216 10217
10220 FUTURA 2.5ft ES PCc Al 16000/840 10221 10223 x x x x

Example of type marking: 10177 = FUTURA 2.4ft ES PCc Al 8800/840 3F M3h

CZECH LIGHT FITTINGS 103

 FUTURA ES PC Al, PCc Al

FUTURA ES PC Al DALI Digital dimmable driver DALI - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

10230 FUTURA 2.2ft ES PC Al 2600/840 DALI x x 10234 10235 x x
10240 FUTURA 2.2ft ES PC Al 3200/840 DALI x x 10244 10245 x x
10250 FUTURA 2.2ft ES PC Al 4400/840 DALI x x 10254 10255 x x
10260 FUTURA 2.4ft ES PC Al 5200/840 DALI 10261 10263 10264 10265 10266 10267
10270 FUTURA 2.4ft ES PC Al 6400/840 DALI 10271 10273 10274 10275 10276 10277
10280 FUTURA 2.4ft ES PC Al 8800/840 DALI 10281 10283 10284 10285 10286 10287
10290 FUTURA 2.4ft ES PC Al 12800/840 DALI 10291 10293 x x x x
10300 FUTURA 2.5ft ES PC Al 6500/840 DALI 10301 10303 10304 10305 10306 10307
10310 FUTURA 2.5ft ES PC Al 8000/840 DALI 10311 10313 10314 10315 10316 10317
10320 FUTURA 2.5ft ES PC Al 11000/840 DALI 10321 10323 10324 10325 10326 10327
10330 FUTURA 2.5ft ES PC Al 16000/840 DALI 10331 10333 x x x x

FUTURA ES PCc Al DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

10340 FUTURA 2.2ft ES PCc Al 2600/840 DALI x x 10344 10345 x x
10350 FUTURA 2.2ft ES PCc Al 3200/840 DALI x x 10354 10355 x x
10360 FUTURA 2.2ft ES PCc Al 4400/840 DALI x x 10364 10365 x x
10370 FUTURA 2.4ft ES PCc Al 5200/840 DALI 10371 10373 10374 10375 10376 10377
10380 FUTURA 2.4ft ES PCc Al 6400/840 DALI 10381 10383 10384 10385 10386 10387
10390 FUTURA 2.4ft ES PCc Al 8800/840 DALI 10391 10393 10394 10395 10396 10397
10400 FUTURA 2.4ft ES PCc Al 12800/840 DALI 10401 10403 x x x x
10410 FUTURA 2.5ft ES PCc Al 6500/840 DALI 10411 10413 10414 10415 10416 10417
10420 FUTURA 2.5ft ES PCc Al 8000/840 DALI 10421 10423 10424 10425 10426 10427
10430 FUTURA 2.5ft ES PCc Al 11000/840 DALI 10431 10433 10434 10435 10436 10437
10440 FUTURA 2.5ft ES PCc Al 16000/840 DALI 10441 10443 x x x x

Example of type marking: 10426 = FUTURA 2.5ft ES PCc Al 8000/840 DALI 3F M1h

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

104
 FUTURA ES PC Al, PCc Al

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) Attachment with the use of side hangers to the wall

LIGHT FITTING DETAILED VIEW

FUTURA ES

CZECH LIGHT FITTINGS 105

 FUTURA HE

177
lm/W

... high efficiency, with sulphur-resistant LED chips.

USE ADVANTAGES
The light fitting is suitable for industrial indoor • Light fitting protection IP66 • Standard model - CRI > 80: 4000 K
and outdoor roofed spaces, warehouses, sports • Maximum ambient temperature up to ta = 50 °C • It can be delivered in dimmable or emergency
areas, workshops, garages, transport terminals, • Lifetime: 50,000 hours / L90B10 version
utility structures and laboratories without a dan- • Diffuser: translucent polycarbonate (PC) = high •T  hrough-wiring of up to 10 wires at body
ger of explosion of gas, dust and combustible mechanical resistance •C  hips with high sulphur resistance
fumes. • Body: grey polycarbonate with Al coolers •L  ong lifetime due to low thermal resistance
(PC Al) = high mechanical resistance
The light fitting is resistant to dust, moisture and • Up to 55 % lower electricity consumption when
spouting water. The body and the diffuser made compared to tubes T5
of polycarbonate (PC) have the increased resist- • In DALI version possibility of constant luminous
ance against deformation and impact. flux for whole lifetime (CLO)
• Constant luminous flux even in ambient tem-
(It is necessary to consider exhalation in the air perature of -25 °C
which can reduce the usability of the plastic and
aluminium at installations in an aggressive envi-
ronment, see also page 325).

up to up to
LED
50ºC -25ºC

CRI
220-240 V DALI L 90
>80 B 10

HACCP

106
 FUTURA HE PC Al, PCc Al

FUTURA HE P C Al, PCc Al

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 • Clips: polyamide + 15 % glass fibre or stainless
• Maximum ambient temperature: ta = 50  °C, steel + polyamide
Maximum ambient temperature: ta = 0-25 °C • Sealing: polyurethane (PUR), foamed body
(version with emergency back-up source for groove
1 or 3 hours; M1h, M3h) •C  able glands: screwed PG 13.5
• Maximum system efficacy: 177 lm/W •D  istance part: polyamide + 10 % glass fibre
• The watt and lumen values can vary by ± 7,5 % • Terminal block: screwless, three-pole (basic
• Standard model - CRI > 80: 4000 K version)
• MacAdam = 3 SDCM • Installation: package contains stainless hooks
• Lifetime: 50,000 hours / L90B10 and stainless brackets
• Diffuser: translucent polycarbonate (PC), UV • Electric equipment: LED sulphur-resistant
stable, impact-resistant modules, current driver or current driver DALI
• Body: grey polycarbonate with Al coolers (PC
Al), UV stable, impact-resistant
• Reflector: steel sheet, white colour (RAL 9003)

FUTURA 2.4ft HE
150° 180° 150°

A
120° 120°
D 145

90° 90°

111
100
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Code Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 50 °C - body: grey polycarbonate with Al coolers - diffuser: translucent polycarbonate
11000 FUTURA 2.2ft HE PC Al 3200/840 50 3340 3140 20 157 1,7 612 475
11010 FUTURA 2.2ft HE PC Al 4400/840 45 4500 4230 26 163 1,7 612 475
11003 FUTURA 2.2ft HE PC Al 6400/840 35 6530 6140 37 166 1,7 612 475
11006 FUTURA 2.4ft HE PC Al 6400/840 50 6580 6190 37 167 3,0 1172 700
11020 FUTURA 2.4ft HE PC Al 8800/840 45 9210 8660 51 170 3,0 1172 700
11016 FUTURA 2.4ft HE PC Al 12800/840 35 13430 12620 72 175 3,0 1172 700
11019 FUTURA 2.5ft HE PC Al 8000/840 50 8460 7950 46 173 3,9 1452 940
11030 FUTURA 2.5ft HE PC Al 11000/840 45 11340 10660 62 172 3,9 1452 940
11041 FUTURA 2.5ft HE PC Al 16000/840 35 16740 15740 89 177 3,9 1452 940
103406 FUTURA 2.5ft HE PC Al 22000/840 35 22640 21280 128 166 4,0 1452 940

FUTURA HE PC Al Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

11000 FUTURA 2.2ft HE PC Al 3200/840 x x 11001 11002 x x
11010 FUTURA 2.2ft HE PC Al 4400/840 x x 11014 11015 x x
11003 FUTURA 2.2ft HE PC Al 6400/840 x x 11004 11005 x x
11006 FUTURA 2.4ft HE PC Al 6400/840 11007 11008 11009 11011 11012 11013
11020 FUTURA 2.4ft HE PC Al 8800/840 11021 11023 11024 11025 11026 11027
11016 FUTURA 2.4ft HE PC Al 12800/840 11017 11018 x x x x
11019 FUTURA 2.5ft HE PC Al 8000/840 11022 11028 11029 11032 11038 11039
11030 FUTURA 2.5ft HE PC Al 11000/840 11031 11033 11034 11035 11036 11037
11041 FUTURA 2.5ft HE PC Al 16000/840 11042 11043 x x x x
103406 FUTURA 2.5ft HE PC Al 22000/840 103407 103408 x x x x

FUTURA HE PCc Al Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

11046 FUTURA 2.2ft HE PCc Al 3200/840 x x 11047 11048 x x
11040 FUTURA 2.2ft HE PCc Al 4400/840 x x 11044 11045 x x
11049 FUTURA 2.2ft HE PCc Al 6400/840 x x 11052 11058 x x
11059 FUTURA 2.4ft HE PCc Al 6400/840 11062 11068 11069 11071 11072 11073
11050 FUTURA 2.4ft HE PCc Al 8800/840 11051 11053 11054 11055 11056 11057
11076 FUTURA 2.4ft HE PCc Al 12800/840 11077 11078 x x x x
11079 FUTURA 2.5ft HE PCc Al 8000/840 11082 11088 11089 11092 11098 11099
11060 FUTURA 2.5ft HE PCc Al 11000/840 11061 11063 11064 11065 11066 11067
11101 FUTURA 2.5ft HE PCc Al 16000/840 11102 11103 x x x x
103412 FUTURA 2.5ft HE PCc Al 22000/840 103413 103414 x x x x

CZECH LIGHT FITTINGS 107

 FUTURA HE PC Al, PCc Al

FUTURA HE PC Al DALI Digital dimmable driver DALI - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

11106 FUTURA 2.2ft HE PC Al 3200/840 DALI x x 11107 11108 x x
11070 FUTURA 2.2ft HE PC Al 4400/840 DALI x x 11074 11075 x x
11109 FUTURA 2.2ft HE PC Al 6400/840 DALI x x 11112 11118 x x
11119 FUTURA 2.4ft HE PC Al 6400/840 DALI 11122 11128 11129 11130 11131 11132
11080 FUTURA 2.4ft HE PC Al 8800/840 DALI 11081 11083 11084 11085 11086 11087
11133 FUTURA 2.4ft HE PC Al 12800/840 DALI 11134 11135 x x x x
11136 FUTURA 2.5ft HE PC Al 8000/840 DALI 11137 11138 11139 11140 11141 11142
11090 FUTURA 2.5ft HE PC Al 11000/840 DALI 11091 11093 11094 11095 11096 11097
11143 FUTURA 2.5ft HE PC Al 16000/840 DALI 11144 11145 x x x x
103411 FUTURA 2.5ft HE PC Al 22000/840 DALI 103409 103410 x x x x

FUTURA HE PCc Al DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

11146 FUTURA 2.2ft HE PCc Al 3200/840 DALI x x 11147 11148 x x
11100 FUTURA 2.2ft HE PCc Al 4400/840 DALI x x 11104 11105 x x
11149 FUTURA 2.2ft HE PCc Al 6400/840 DALI x x 11150 11151 x x
11152 FUTURA 2.4ft HE PCc Al 6400/840 DALI 11153 11154 11155 11156 11157 11158
11110 FUTURA 2.4ft HE PCc Al 8800/840 DALI 11111 11113 11114 11115 11116 11117
11159 FUTURA 2.4ft HE PCc Al 12800/840 DALI 11160 11161 x x x x
11162 FUTURA 2.5ft HE PCc Al 8000/840 DALI 11163 11164 11165 11166 11167 11168
11120 FUTURA 2.5ft HE PCc Al 11000/840 DALI 11121 11123 11124 11125 11126 11127
11169 FUTURA 2.5ft HE PCc Al 16000/840 DALI 11170 11171 x x x x
103415 FUTURA 2.5ft HE PCc Al 22000/840 DALI 103416 103417 x x x x

Example of type marking: 11116 = FUTURA 2.4ft HE PCc Al 8800/840 DALI 3F M1h

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) Attachment with the use of side hangers to the wall

LIGHT FITTING DETAILED VIEW

FUTURA HE

108
FUTURA VP

... for outdoor spaces.

USE ADVANTAGES
The light fitting is suitable for the installation in • Light fitting protection IP66 • At request CRI > 80: 3000 K, 5000 K, 6500 K,
outdoor spaces with shelter. It is equipped with a • Maximum ambient temperature up to ta = 50 °C CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
ventilation plug made of polyamide which elimi- • Lifetime: 50,000 hours / L90B10 • It can be delivered in dimmable or emergency
nates the presence of condensation fumes and • Diffuser: translucent polycarbonate (PC) = high version
underpressure in the light fitting caused by am- mechanical resistance •T  hrough-wiring of up to 10 wires at body
bient temperature fluctuations. • Body: grey polycarbonate with Al coolers •C  ertification: ENEC, CB, HACCP
(PC Al) = high mechanical resistance
The light fitting is resistant to dust, moisture and • Up to 45 % lower electricity consumption when
spouting water. The body and the diffuser made compared to tubes T5
of polycarbonate (PC) have the increased resist- • In DALI version possibility of constant luminous
ance against deformation and impact. flux for whole lifetime (CLO)
• Constant luminous flux even in ambient tem-
(It is necessary to consider exhalation in the air perature of -25 °C
which can reduce the usability of the plastic and •S tandard model - CRI > 80: 4000 K
aluminium at installations in an aggressive envi-
ronment, see also page 325).

up to up to
LED
50ºC -25ºC

CRI
220-240 V DALI L 90
>80 B 10

05 HACCP

CZECH LIGHT FITTINGS 109

 FUTURA VP PC Al, VP PCc Al

FUTURA V P PC Al, VP PCc Al

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 • Ventilation plug: type BVPB-01 made of polyam-
• Maximum ambient temperature: ta = 50  °C, ide, size M12 × 1.5
Maximum ambient temperature: ta = 0-25 °C • Clips: polyamide + 15 % glass fibre or stainless
(version with emergency back-up source for steel + polyamide
1 or 3 hours; M1h, M3h) • Sealing: polyurethane (PUR), foamed body
• Maximum system efficacy: 161 lm/W groove
• The watt and lumen values can vary by ± 7,5 % •C  able glands: screwed PG 13.5
• Standard model - CRI > 80: 4000 K •D  istance part: polyamide + 10 % glass fibre
• MacAdam = 3 SDCM • Terminal block: screwless, three-pole (basic
• Lifetime: 50,000 hours / L90B10 version)
• Diffuser: translucent polycarbonate (PC), UV • Installation: package contains stainless hooks
stable, impact-resistant and stainless brackets
• Body: grey polycarbonate with Al coolers, UV • Electric equipment: LED modules, current driv-
stable, impact-resistant er or current driver DALI
• Reflector: steel sheet, white colour (RAL 9003)

FUTURA 2.4ft VP
150° 180° 150°

A
120° 120°
D 145

90° 90°

111
100
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Code Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 50 °C - body: grey polycarbonate with Al coolers - diffuser: translucent polycarbonate
76010 FUTURA 2.2ft VP PC Al 2600/840 50 2630 2470 16 154 1,5 612 475
76020 FUTURA 2.2ft VP PC Al 3200/840 50 3110 2920 19 154 1,5 612 475
76030 FUTURA 2.2ft VP PC Al 4400/840 45 4390 4130 27 153 1,7 612 475
76040 FUTURA 2.4ft VP PC Al 5200/840 50 5150 4840 31 156 2,9 1172 700
76050 FUTURA 2.4ft VP PC Al 6400/840 50 6260 5880 37 159 2,9 1172 700
76060 FUTURA 2.4ft VP PC Al 8800/840 45 8710 8190 51 161 3,0 1172 700
76410 FUTURA 2.4ft VP PC Al 12800/840 35 14000 13160 84 157 3,0 1172 700
76070 FUTURA 2.5ft VP PC Al 6500/840 50 6380 6000 38 158 3,8 1452 940
76080 FUTURA 2.5ft VP PC Al 8000/840 50 7750 7290 46 158 3,9 1452 940
76090 FUTURA 2.5ft VP PC Al 11000/840 45 12050 11330 71 160 3,9 1452 940
76420 FUTURA 2.5ft VP PC Al 16000/840 35 17550 16500 104 159 3,9 1452 940

76020 FUTURA 2.2ft VP PC Al 3200/840 = suitable replacement for T8 fl. tube light fitting PRIMA 218 – 2 × 18 W
76050 FUTURA 2.4ft VP PC Al 6400/840 = suitable replacement for T8 fl. tube light fitting PRIMA 236 – 2 × 36 W
76080 FUTURA 2.5ft VP PC Al 8000/840 = suitable replacement for T8 fl. tube light fitting PRIMA 258 – 2 × 58 W

FUTURA VP PC Al Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

76010 FUTURA 2.2ft VP PC Al 2600/840 x x 76014 76015 x x
76020 FUTURA 2.2ft VP PC Al 3200/840 x x 76024 76025 x x
76030 FUTURA 2.2ft VP PC Al 4400/840 x x 76034 76035 x x
76040 FUTURA 2.4ft VP PC Al 5200/840 76140 76340 76044 76045 76344 76345
76050 FUTURA 2.4ft VP PC Al 6400/840 76150 76350 76054 76055 76354 76355
76060 FUTURA 2.4ft VP PC Al 8800/840 76160 76360 76064 76065 76364 76365
76410 FUTURA 2.4ft VP PC Al 12800/840 76411 76412 x x x x
76070 FUTURA 2.5ft VP PC Al 6500/840 76170 76370 76074 76075 76374 76375
76080 FUTURA 2.5ft VP PC Al 8000/840 76180 76380 76084 76085 76384 76385
76090 FUTURA 2.5ft VP PC Al 11000/840 76190 76390 76094 76095 76394 76395
76420 FUTURA 2.5ft VP PC Al 16000/840 76421 76422 x x x x

FUTURA VP PCc Al Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

76210 FUTURA 2.2ft VP PCc Al 2600/840 x x 76214 76215 x x
76220 FUTURA 2.2ft VP PCc Al 3200/840 x x 76224 76225 x x
76230 FUTURA 2.2ft VP PCc Al 4400/840 x x 76234 76235 x x
76240 FUTURA 2.4ft VP PCc Al 5200/840 76540 76640 76244 76245 76644 76645
76250 FUTURA 2.4ft VP PCc Al 6400/840 76550 76650 76254 76255 76654 76655
76260 FUTURA 2.4ft VP PCc Al 8800/840 76560 76660 76264 76265 76664 76665
76430 FUTURA 2.4ft VP PCc Al 12800/840 76431 76432 x x x x
76270 FUTURA 2.5ft VP PCc Al 6500/840 76570 76670 76274 76275 76674 76675
76280 FUTURA 2.5ft VP PCc Al 8000/840 76580 76680 76284 76285 76684 76685
76290 FUTURA 2.5ft VP PCc Al 11000/840 76590 76690 76294 76295 76694 76695
76440 FUTURA 2.5ft VP PCc Al 16000/840 76441 76442 x x x x

Example of type marking: 76664 = FUTURA 2.4ft VP PCc Al 8800/840 3F M1h

110
 FUTURA VP PC Al, VP PCc Al

FUTURA VP PC Al DALI Digital dimmable driver DALI - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

76013 FUTURA 2.2ft VP PC Al 2600/840 DALI x x 76017 76019 x x
76023 FUTURA 2.2ft VP PC Al 3200/840 DALI x x 76027 76029 x x
76033 FUTURA 2.2ft VP PC Al 4400/840 DALI x x 76037 76039 x x
76043 FUTURA 2.4ft VP PC Al 5200/840 DALI 76143 76343 76047 76049 76347 76349
76053 FUTURA 2.4ft VP PC Al 6400/840 DALI 76153 76353 76057 76059 76357 76359
76063 FUTURA 2.4ft VP PC Al 8800/840 DALI 76163 76363 76067 76069 76367 76369
76450 FUTURA 2.4ft VP PC Al 12800/840 DALI 76451 76452 x x x x
76073 FUTURA 2.5ft VP PC Al 6500/840 DALI 76173 76373 76077 76079 76377 76379
76083 FUTURA 2.5ft VP PC Al 8000/840 DALI 76183 76383 76087 76089 76387 76389
76093 FUTURA 2.5ft VP PC Al 11000/840 DALI 76193 76393 76097 76099 76397 76399
76460 FUTURA 2.5ft VP PC Al 16000/840 DALI 76461 76462 x x x x

FUTURA VP PCc Al DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

76213 FUTURA 2.2ft VP PCc Al 2600/840 DALI x x 76217 76219 x x
76223 FUTURA 2.2ft VP PCc Al 3200/840 DALI x x 76227 76229 x x
76233 FUTURA 2.2ft VP PCc Al 4400/840 DALI x x 76237 76239 x x
76243 FUTURA 2.4ft VP PCc Al 5200/840 DALI 76543 76643 76247 76249 76647 76649
76253 FUTURA 2.4ft VP PCc Al 6400/840 DALI 76553 76653 76257 76259 76657 76659
76263 FUTURA 2.4ft VP PCc Al 8800/840 DALI 76563 76663 76267 76269 76667 76669
76470 FUTURA 2.4ft VP PCc Al 12800/840 DALI 76471 76472 x x x x
76273 FUTURA 2.5ft VP PCc Al 6500/840 DALI 76573 76673 76277 76279 76677 76679
76283 FUTURA 2.5ft VP PCc Al 8000/840 DALI 76583 76683 76287 76289 76687 76689
76293 FUTURA 2.5ft VP PCc Al 11000/840 DALI 76593 76693 76297 76299 76697 76699
76480 FUTURA 2.5ft VP PCc Al 16000/840 DALI 76481 76482 x x x x

Example of type marking: 76667 = FUTURA 2.4ft VP PCc Al 8800/840 DALI 3F M1h

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

CZECH LIGHT FITTINGS 111

 FUTURA VP PC Al, VP PCc Al

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) Attachment with the use of side hangers to the wall

LIGHT FITTING DETAILED VIEW

FUTURA VP

112
FUTURA NB

… f or storage rack lanes with high ceilings 10-15 m.

USE ADVANTAGES
The light fitting with narrow emitting character- • Light fitting protection IP66 • At request CRI > 80: 3000 K, 5000 K, 6500 K,
istics is suitable to illuminate storage rack lanes • Maximum ambient temperature up to ta = 40 °C CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
and narrow spaces with high ceilings. Its assem- • Lifetime: 50,000 hours / L90B10 • It can be delivered in dimmable or emergency
bly height is 10-15 m. • Diffuser: transparent polycarbonate (PC) = high version
mechanical resistance • ICan be delivered with a grille to reduce the
The light fitting is resistant to dust, moisture and • Body: grey polycarbonate with Al coolers longitudinal UGR
spouting water. The body and the diffuser made (PC Al) = high mechanical resistance •T  hrough-wiring of up to 10 wires at body
of polycarbonate (PC) have the increased resist- • Up to 45 % lower electricity consumption when •C  ertification: HACCP
ance against deformation and impact. compared to tubes T5
• In DALI version possibility of constant luminous
(It is necessary to consider exhalation in the air flux for whole lifetime (CLO)
which can reduce the usability of the plastic and • Constant luminous flux even in ambient tem-
aluminium at installations in an aggressive envi- perature of -25 °C
ronment, see also page 325). •S tandard model - CRI > 80: 4000 K

up to up to
LED
40ºC -25ºC

CRI
220-240 V DALI L 90
>80 B 10

HACCP

CZECH LIGHT FITTINGS 113

 FUTURA NB PC Al, PCc Al

FUTURA NB P C Al, PCc Al

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 • Reflector: parabolic polished aluminium with nar-
• Maximum ambient temperature: ta = 40  °C, row emitting characteristics (NB - narrow beam)
Maximum ambient temperature: ta = 0-25 °C • Clips: polyamide + 15 % glass fibre or stainless
(version with emergency back-up source for steel + polyamide
1 or 3 hours; M1h, M3h) • Sealing: polyurethane (PUR), foamed body
• Maximum system efficacy: 144 lm/W groove
• The watt and lumen values can vary by ± 7,5 % •C  able glands: screwed PG 13.5
• Standard model - CRI > 80: 4000 K •D  istance part: polyamide + 10 % glass fibre
• MacAdam = 3 SDCM • Terminal block: screwless, three-pole (basic
• Lifetime: 50,000 hours / L90B10 version)
• Diffuser: transparent polycarbonate (PC), • Installation: package contains stainless hooks
UV stable, impact-resistant and stainless brackets
• Body: grey polycarbonate with Al coolers • Electric equipment: LED modules, current
(PC Al), UV stable, impact-resistant driver or current driver DALI

FUTURA NB 2.4ft
150° 180° 150°

A
D 145 120° 120°

90° 90°

111
100
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Code Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 40 °C - body: grey polycarbonate with Al coolers - diffuser: transparent polycarbonate
78060 FUTURA 2.4ft NB PC Al 8800/840 40 8710 7320 51 144 3,3 1172 700
78070 FUTURA 2.4ft NB PC Al 12800/840 30 14000 11760 84 140 3,3 1172 700
78090 FUTURA 2.5ft NB PC Al 11000/840 40 12050 10120 71 143 3,9 1452 940
78080 FUTURA 2.5ft NB PC Al 16000/840 30 17550 14740 104 142 3,9 1452 940

FUTURA NB PC Al Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

78060 FUTURA 2.4ft NB PC Al 8800/840 78160 78360 78064 78065 78364 78365
78070 FUTURA 2.4ft NB PC Al 12800/840 78170 78370 x x x x
78090 FUTURA 2.5ft NB PC Al 11000/840 78190 78390 78094 78095 78394 78395
78080 FUTURA 2.5ft NB PC Al 16000/840 78180 78380 x x x x

FUTURA NB PCc Al Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

78260 FUTURA 2.4ft NB PCc Al 8800/840 78560 78660 78264 78265 78664 78665
78270 FUTURA 2.4ft NB PCc Al 12800/840 78570 78670 x x x x
78290 FUTURA 2.5ft NB PCc Al 11000/840 78590 78690 78294 78295 78694 78695
78280 FUTURA 2.5ft NB PCc Al 16000/840 78580 78680 x x x x

FUTURA NB PC Al DALI Digital dimmable driver DALI - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

78063 FUTURA 2.4ft NB PC Al 8800/840 DALI 78163 78363 78067 78069 78367 78369
78073 FUTURA 2.4ft NB PC Al 12800/840 DALI 78173 78373 x x x x
78093 FUTURA 2.5ft NB PC Al 11000/840 DALI 78193 78393 78097 78099 78397 78399
78083 FUTURA 2.5ft NB PC Al 16000/840 DALI 78183 78383 x x x x

FUTURA NB PCc Al DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

78263 FUTURA 2.4ft NB PCc Al 8800/840 DALI 78563 78663 78267 78269 78667 78669
78273 FUTURA 2.4ft NB PCc Al 12800/840 DALI 78573 78673 x x x x
78293 FUTURA 2.5ft NB PCc Al 11000/840 DALI 78593 78693 78297 78299 78697 78699
78283 FUTURA 2.5ft NB PCc Al 16000/840 DALI 78583 78683 x x x x

Example of type marking: 78669 = FUTURA 2.4ft NB PCc Al 8800/840 DALI 3F M3h

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

114
 FUTURA NB PC Al, PCc Al

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks

LIGHT FITTING DETAILED VIEW

FUTURA NB

ACCESSORIES

Grid FUTURA NB
Additional grid for reducing the longitudinal UGR for FUTURA NB lamps.
The grid reduces the glare value in the longitudinal direction to below 19 (see the luminance curve below).

Weight
Code Type Description
[kg]
11989 MNB 2.4 grid FUTURA 2.4ft NB 0,36
11990 MNB 2.5 grid FUTURA 2.5ft NB 0,45

FUTURA NB 2.4ft (with grid)

UGR<19 150° 180° 150°

120° 120°

90° 90°

C0 60° 60°

C90
30° 0° 30°

Luminous flux Luminous flux Power System Net

A D
Code Type of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[lm] [lm] [W] [lm/W] [kg]
Change of the values for lamp variants with grid
78060 FUTURA 2.4ft NB PC Al 8800/840 8710 5660 51 111 3,3 1172 700
78070 FUTURA 2.4ft NB PC Al 12800/840 14000 9100 84 108 3,3 1172 700
78090 FUTURA 2.5ft NB PC Al 11000/840 12050 7830 71 110 3,9 1452 940
78080 FUTURA 2.5ft NB PC Al 16000/840 17550 11410 104 110 3,9 1452 940

CZECH LIGHT FITTINGS 115

 FUTURA ABS

… dustproof, waterproof and chemically resistant.

USE ADVANTAGES
The light fitting is suitable for the environment • Light fitting protection IP66 • At request CRI > 80: 3000 K, 5000 K, 6500 K,
where ammoniac fumes, lixiviants, alkaline • Maximum ambient temperature up to ta = 50 °C CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
compounds and hot water (hydrolyses) can be • Lifetime: 50,000 hours / L90B10 • It can be delivered in dimmable or emergency
present. We recommend this light fitting for ag- • Diffuser: translucent acrylate (AC) = high version
ricultural operations, stables, car washing lines, chemical resistance •T  hrough-wiring of up to 10 wires at body
warehouses, mechanical workshops and labora- • Body: dark grey ABS with Al coolers (ABS Al) •C  ertification: ENEC, CB, (except RED), HACCP
tories without a danger of explosion of gas, dust = high chemical resistance
and combustible fumes. • Up to 45 % lower electricity consumption when
compared to tubes T5
The light fitting is resistant to dust, moisture and • In DALI version possibility of constant luminous
spouting water. The body made of ABS and the flux for whole lifetime (CLO)
diffuser made of AC have increased chemical • Constant luminous flux even in ambient tem-
resistance. perature of -25 °C
•S tandard model - CRI > 80: 4000 K
(It is necessary to consider exhalation in the air
which can reduce the usability of the plastic and
aluminium at installations in an aggressive envi-
ronment, see also page 325). up to up to
LED
50ºC -25ºC
Always open the cover of the light fitting out of an
CRI
environment with aggressive volatile substances. 220-240 V DALI L 90
>80 B 10

05 HACCP

116
 FUTURA ABS Al, ABSc Al

FUTURA A BS Al, ABSc Al

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 •R  eflector: steel sheet, white colour (RAL 9003)
• Maximum ambient temperature: ta = 50  °C, • Clips: polyamide + 15 % glass fibre or stainless
Maximum ambient temperature: ta = 0-25 °C steel + polyamide
(version with emergency back-up source for • Sealing: polyurethane (PUR), foamed body
1 or 3 hours; M1h, M3h) groove
• Maximum system efficacy: 150 lm/W •C  able glands: screwed PG 13.5
• The watt and lumen values can vary by ± 7,5 % •D  istance part: polyamide + 10 % glass fibre
• Standard model - CRI > 80: 4000 K • Terminal block: screwless, three-pole (basic
• MacAdam = 3 SDCM version)
• Lifetime: 50,000 hours / L90B10 • Installation: package contains stainless hooks
• Diffuser: translucent acrylate (AC), UV stable, and stainless brackets
chemically resistant • Electric equipment: LED modules, current driv-
• Body: dark grey ABS with Al coolers (ABS Al), UV er or current driver DALI
stable, chemically resistant

FUTURA 2.4ft ABS

150° 180° 150°

A
120° 120°
D 145

90° 90°

111
100
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Code Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 50 °C - body: dark grey ABS with Al coolers - diffuser: translucent acrylate
77010 FUTURA 2.2ft ABS Al 2600/840 50 2630 2310 16 144 1,5 612 475
77020 FUTURA 2.2ft ABS Al 3200/840 50 3110 2740 19 144 1,5 612 475
77030 FUTURA 2.2ft ABS Al 4400/840 45 4390 3860 27 143 1,7 612 475
77040 FUTURA 2.4ft ABS Al 5200/840 50 5150 4530 31 146 2,9 1172 700
77050 FUTURA 2.4ft ABS Al 6400/840 50 6260 5510 37 149 2,9 1172 700
77060 FUTURA 2.4ft ABS Al 8800/840 45 8710 7660 51 150 3,0 1172 700
77410 FUTURA 2.4ft ABS Al 12800/840 35 14000 12320 84 147 3,0 1172 700
77070 FUTURA 2.5ft ABS Al 6500/840 50 6380 5610 38 148 3,8 1452 940
77080 FUTURA 2.5ft ABS Al 8000/840 50 7750 6820 46 148 3,9 1452 940
77090 FUTURA 2.5ft ABS Al 11000/840 45 12050 10600 71 149 3,9 1452 940
77420 FUTURA 2.5ft ABS Al 16000/840 35 17550 15440 104 148 3,9 1452 940

77020 FUTURA 2.2ft ABS Al 3200/840 = suitable replacement for T8 fl. tube light fitting PRIMA 218 – 2 × 18 W
77050 FUTURA 2.4ft ABS Al 6400/840 = suitable replacement for T8 fl. tube light fitting PRIMA 236 – 2 × 36 W
77080 FUTURA 2.5ft ABS Al 8000/840 = suitable replacement for T8 fl. tube light fitting PRIMA 258 – 2 × 58 W

FUTURA ABS Al Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

77010 FUTURA 2.2ft ABS Al 2600/840 x x 77014 77015 x x
77020 FUTURA 2.2ft ABS Al 3200/840 x x 77024 77025 x x
77030 FUTURA 2.2ft ABS Al 4400/840 x x 77034 77035 x x
77040 FUTURA 2.4ft ABS Al 5200/840 77140 77340 77044 77045 77344 77345
77050 FUTURA 2.4ft ABS Al 6400/840 77150 77350 77054 77055 77354 77355
77060 FUTURA 2.4ft ABS Al 8800/840 77160 77360 77064 77065 77364 77365
77410 FUTURA 2.4ft ABS Al 12800/840 77411 77412 x x x x
77070 FUTURA 2.5ft ABS Al 6500/840 77170 77370 77074 77075 77374 77375
77080 FUTURA 2.5ft ABS Al 8000/840 77180 77380 77084 77085 77384 77385
77090 FUTURA 2.5ft ABS Al 11000/840 77190 77390 77094 77095 77394 77395
77420 FUTURA 2.5ft ABS Al 16000/840 77421 77422 x x x x

FUTURA ABSc Al Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

77210 FUTURA 2.2ft ABSc Al 2600/840 x x 77214 77215 x x
77220 FUTURA 2.2ft ABSc Al 3200/840 x x 77224 77225 x x
77230 FUTURA 2.2ft ABSc Al 4400/840 x x 77234 77235 x x
77240 FUTURA 2.4ft ABSc Al 5200/840 77540 77640 77244 77245 77644 77645
77250 FUTURA 2.4ft ABSc Al 6400/840 77550 77650 77254 77255 77654 77655
77260 FUTURA 2.4ft ABSc Al 8800/840 77560 77660 77264 77265 77664 77665
77430 FUTURA 2.4ft ABSc Al 12800/840 77431 77432 x x x x
77270 FUTURA 2.5ft ABSc Al 6500/840 77570 77670 77274 77275 77674 77675
77280 FUTURA 2.5ft ABSc Al 8000/840 77580 77680 77284 77285 77684 77685
77290 FUTURA 2.5ft ABSc Al 11000/840 77590 77690 77294 77295 77694 77695
77440 FUTURA 2.5ft ABSc Al 16000/840 77441 77442 x x x x

CZECH LIGHT FITTINGS 117

 FUTURA ABS Al, ABSc Al

FUTURA ABS Al DALI Digital dimmable driver DALI - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

77013 FUTURA 2.2ft ABS Al 2600/840 DALI x x 77017 77019 x x
77023 FUTURA 2.2ft ABS Al 3200/840 DALI x x 77027 77029 x x
77033 FUTURA 2.2ft ABS Al 4400/840 DALI x x 77037 77039 x x
77043 FUTURA 2.4ft ABS Al 5200/840 DALI 77143 77343 77047 77049 77347 77349
77053 FUTURA 2.4ft ABS Al 6400/840 DALI 77153 77353 77057 77059 77357 77359
77063 FUTURA 2.4ft ABS Al 8800/840 DALI 77163 77363 77067 77069 77367 77369
77450 FUTURA 2.4ft ABS Al 12800/840 DALI 77451 77452 x x x x
77073 FUTURA 2.5ft ABS Al 6500/840 DALI 77173 77373 77077 77079 77377 77379
77083 FUTURA 2.5ft ABS Al 8000/840 DALI 77183 77383 77087 77089 77387 77389
77093 FUTURA 2.5ft ABS Al 11000/840 DALI 77193 77393 77097 77099 77397 77399
77460 FUTURA 2.5ft ABS Al 16000/840 DALI 77461 77462 x x x x

FUTURA ABSc Al DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

77213 FUTURA 2.2ft ABSc Al 2600/840 DALI x x 77217 77219 x x
77223 FUTURA 2.2ft ABSc Al 3200/840 DALI x x 77227 77229 x x
77233 FUTURA 2.2ft ABSc Al 4400/840 DALI x x 77237 77239 x x
77243 FUTURA 2.4ft ABSc Al 5200/840 DALI 77543 77643 77247 77249 77647 77649
77253 FUTURA 2.4ft ABSc Al 6400/840 DALI 77553 77653 77257 77259 77657 77659
77263 FUTURA 2.4ft ABSc Al 8800/840 DALI 77563 77663 77267 77269 77667 77669
77470 FUTURA 2.4ft ABSc Al 12800/840 DALI 77471 77472 x x x x
77273 FUTURA 2.5ft ABSc Al 6500/840 DALI 77573 77673 77277 77279 77677 77679
77283 FUTURA 2.5ft ABSc Al 8000/840 DALI 77583 77683 77287 77289 77687 77689
77293 FUTURA 2.5ft ABSc Al 11000/840 DALI 77593 77693 77297 77299 77697 77699
77480 FUTURA 2.5ft ABSc Al 16000/840 DALI 77481 77482 x x x x

Example of type marking: 77667 = FUTURA 2.4ft ABSc Al 8800/840 DALI 3F M1h

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

118
 FUTURA ABS Al, ABSc Al

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) Attachment with the use of side hangers to the wall

LIGHT FITTING DETAILED VIEW

FUTURA ABS

CZECH LIGHT FITTINGS 119

 FUTURA ES ABS

158
lm/W

… Energy Saver, chemically resistant.

USE ADVANTAGES
The light fitting is suitable for the environment • Light fitting protection IP66 • Standard model - CRI > 80: 4000 K
where ammoniac fumes, lixiviants, alkaline • Maximum ambient temperature up to ta = 50 °C •A  t request CRI > 80: 3000 K, 5000 K, 6500 K
compounds and hot water (hydrolyses) can be • Lifetime: 50,000 hours / L90B10 • It can be delivered in dimmable or emergency
present. We recommend this light fitting for ag- • Diffuser: translucent acrylate (AC) = high version
ricultural operations, stables, car washing lines, chemical resistance •T  hrough-wiring of up to 10 wires at body
warehouses, mechanical workshops and labora- • Body: dark grey ABS with Al coolers (ABS Al) •C  ertification: ENEC, CB, HACCP
tories without a danger of explosion of gas, dust = high chemical resistance
and combustible fumes. • Up to 50 % lower electricity consumption when
compared to tubes T5
The light fitting is resistant to dust, moisture and • In DALI version possibility of constant luminous
spouting water. The body made of ABS and the flux for whole lifetime (CLO)
diffuser made of AC have increased chemical • Constant luminous flux even in ambient tem-
resistance. perature of -25 °C

(It is necessary to consider exhalation in the air

which can reduce the usability of the plastic and
aluminium at installations in an aggressive envi-
ronment, see also page 325). up to up to
LED
50ºC -25ºC
Always open the cover of the light fitting out of an
CRI
environment with aggressive volatile substances. 220-240 V DALI L 90
>80 B 10

05 HACCP

120
 FUTURA ES ABS Al, ABSc Al

FUTURA ES A BS Al, ABSc Al

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 •R  eflector: steel sheet, white colour (RAL 9003)
• Maximum ambient temperature: ta = 50  °C, • Clips: polyamide + 15 % glass fibre or stainless
Maximum ambient temperature: ta = 0-25 °C steel + polyamide
(version with emergency back-up source for • Sealing: polyurethane (PUR), foamed body
1 or 3 hours; M1h, M3h) groove
• Maximum system efficacy: 158 lm/W •C  able glands: screwed PG 13.5
• The watt and lumen values can vary by ± 7,5 % •D  istance part: polyamide + 10 % glass fibre
• Standard model - CRI > 80: 4000 K • Terminal block: screwless, three-pole (basic
• MacAdam = 3 SDCM version)
• Lifetime: 50,000 hours / L90B10 • Installation: package contains stainless hooks
• Diffuser: translucent acrylate (AC), UV stable, and stainless brackets
chemically resistant • Electric equipment: LED modules, current driv-
• Body: dark grey ABS with Al coolers (ABS Al), UV er or current driver DALI
stable, chemically resistant

FUTURA 2.4ft ES ABS

150° 180° 150°

A
120° 120°
D 145

90° 90°

111
100
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Code Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 50 °C - body: dark grey ABS with Al coolers - diffuser: translucent acrylate
10510 FUTURA 2.2ft ES ABS Al 2600/840 50 2630 2310 16 144 1,5 612 475
10520 FUTURA 2.2ft ES ABS Al 3200/840 50 3180 2800 19 147 1,5 612 475
10530 FUTURA 2.2ft ES ABS Al 4400/840 45 4450 3920 27 145 1,7 612 475
10540 FUTURA 2.4ft ES ABS Al 5200/840 50 5260 4630 31 149 2,9 1172 700
10550 FUTURA 2.4ft ES ABS Al 6400/840 50 6310 5550 37 150 2,9 1172 700
10560 FUTURA 2.4ft ES ABS Al 8800/840 45 8980 7900 51 155 3,0 1172 700
10570 FUTURA 2.4ft ES ABS Al 12800/840 35 14280 12570 84 150 3,0 1172 700
10580 FUTURA 2.5ft ES ABS Al 6500/840 50 6700 5900 38 155 3,8 1452 940
10590 FUTURA 2.5ft ES ABS Al 8000/840 50 8100 7130 46 155 3,9 1452 940
10600 FUTURA 2.5ft ES ABS Al 11000/840 45 12750 11220 71 158 3,9 1452 940
10610 FUTURA 2.5ft ES ABS Al 16000/840 35 17860 15720 104 151 3,9 1452 940

77020 FUTURA 2.2ft ES ABS Al 3200/840 = suitable replacement for T8 fl. tube light fitting PRIMA 218 – 2 × 18 W
77050 FUTURA 2.4ft ES ABS Al 6400/840 = suitable replacement for T8 fl. tube light fitting PRIMA 236 – 2 × 36 W
77080 FUTURA 2.5ft ES ABS Al 8000/840 = suitable replacement for T8 fl. tube light fitting PRIMA 258 – 2 × 58 W

FUTURA ES ABS Al Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

10510 FUTURA 2.2ft ES ABS Al 2600/840 x x 10514 10515 x x
10520 FUTURA 2.2ft ES ABS Al 3200/840 x x 10524 10525 x x
10530 FUTURA 2.2ft ES ABS Al 4400/840 x x 10534 10535 x x
10540 FUTURA 2.4ft ES ABS Al 5200/840 10541 10543 10544 10545 10546 10547
10550 FUTURA 2.4ft ES ABS Al 6400/840 10551 10553 10554 10555 10556 10557
10560 FUTURA 2.4ft ES ABS Al 8800/840 10561 10563 10564 10565 10566 10567
10570 FUTURA 2.4ft ES ABS Al 12800/840 10571 10573 x x x x
10580 FUTURA 2.5ft ES ABS Al 6500/840 10581 10583 10584 10585 10586 10587
10590 FUTURA 2.5ft ES ABS Al 8000/840 10591 10593 10594 10595 10596 10597
10600 FUTURA 2.5ft ES ABS Al 11000/840 10601 10603 10604 10605 10606 10607
10610 FUTURA 2.5ft ES ABS Al 16000/840 10611 10613 x x x x

FUTURA ES ABSc Al Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

10620 FUTURA 2.2ft ES ABSc Al 2600/840 x x 10624 10625 x x
10630 FUTURA 2.2ft ES ABSc Al 3200/840 x x 10634 10635 x x
10640 FUTURA 2.2ft ES ABSc Al 4400/840 x x 10644 10645 x x
10650 FUTURA 2.4ft ES ABSc Al 5200/840 10651 10653 10654 10655 10656 10657
10660 FUTURA 2.4ft ES ABSc Al 6400/840 10661 10663 10664 10665 10666 10667
10670 FUTURA 2.4ft ES ABSc Al 8800/840 10671 10673 10674 10675 10676 10677
10680 FUTURA 2.4ft ES ABSc Al 12800/840 10681 10683 x x x x
10690 FUTURA 2.5ft ES ABSc Al 6500/840 10691 10693 10694 10695 10696 10697
10700 FUTURA 2.5ft ES ABSc Al 8000/840 10701 10703 10704 10705 10706 10707
10710 FUTURA 2.5ft ES ABSc Al 11000/840 10711 10713 10714 10715 10716 10717
10720 FUTURA 2.5ft ES ABSc Al 16000/840 10721 10723 x x x x

Example of type marking: 10706 = FUTURA 2.4ft ES ABSc Al 8800/840 3F M1h

CZECH LIGHT FITTINGS 121

 FUTURA ES ABS Al, ABSc Al

FUTURA ES ABS Al DALI Digital dimmable driver DALI - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

10730 FUTURA 2.2ft ES ABS Al 2600/840 DALI x x 10734 10735 x x
10740 FUTURA 2.2ft ES ABS Al 3200/840 DALI x x 10744 10745 x x
10750 FUTURA 2.2ft ES ABS Al 4400/840 DALI x x 10754 10755 x x
10760 FUTURA 2.4ft ES ABS Al 5200/840 DALI 10761 10763 10764 10765 10766 10767
10770 FUTURA 2.4ft ES ABS Al 6400/840 DALI 10771 10773 10774 10775 10776 10777
10780 FUTURA 2.4ft ES ABS Al 8800/840 DALI 10781 10783 10784 10785 10786 10787
10790 FUTURA 2.4ft ES ABS Al 12800/840 DALI 10791 10793 x x x x
10800 FUTURA 2.5ft ES ABS Al 6500/840 DALI 10801 10803 10804 10805 10806 10807
10810 FUTURA 2.5ft ES ABS Al 8000/840 DALI 10811 10813 10814 10815 10816 10817
10820 FUTURA 2.5ft ES ABS Al 11000/840 DALI 10821 10823 10824 10825 10826 10827
10830 FUTURA 2.5ft ES ABS Al 16000/840 DALI 10831 10833 x x x x

FUTURA ES ABSc Al DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

10840 FUTURA 2.2ft ES ABSc Al 2600/840 DALI x x 10844 10845 x x
10850 FUTURA 2.2ft ES ABSc Al 3200/840 DALI x x 10854 10855 x x
10860 FUTURA 2.2ft ES ABSc Al 4400/840 DALI x x 10864 10865 x x
10870 FUTURA 2.4ft ES ABSc Al 5200/840 DALI 10871 10873 10874 10875 10876 10877
10880 FUTURA 2.4ft ES ABSc Al 6400/840 DALI 10881 10883 10884 10885 10886 10887
10890 FUTURA 2.4ft ES ABSc Al 8800/840 DALI 10891 10893 10894 10895 10896 10897
10900 FUTURA 2.4ft ES ABSc Al 12800/840 DALI 10901 10903 x x x x
10910 FUTURA 2.5ft ES ABSc Al 6500/840 DALI 10911 10913 10914 10915 10916 10917
10920 FUTURA 2.5ft ES ABSc Al 8000/840 DALI 10921 10923 10924 10925 10926 10927
10930 FUTURA 2.5ft ES ABSc Al 11000/840 DALI 10931 10933 10934 10935 10936 10937
10940 FUTURA 2.5ft ES ABSc Al 16000/840 DALI 10941 10943 x x x x

Example of type marking: 10896 = FUTURA 2.4ft ES ABSc Al 8800/840 DALI 3F M1h

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) Attachment with the use of side hangers to the wall

LIGHT FITTING DETAILED VIEW

FUTURA ES ABS

122
FUTURA HE ABS

166
lm/W

…h
 igh efficiency, with sulphur-resistant LED chips,
chemically resistant.
USE ADVANTAGES
The light fitting is suitable for the environment • Light fitting protection IP66 • Standard model - CRI > 80: 4000 K
where ammoniac fumes, lixiviants, alkaline • Maximum ambient temperature up to ta = 50 °C • It can be delivered in dimmable or emergency
compounds and hot water (hydrolyses) can be • Lifetime: 50,000 hours / L90B10 version
present. We recommend this light fitting for ag- • Diffuser: translucent acrylate (AC) = high •T  hrough-wiring of up to 10 wires at body
ricultural operations, stables, car washing lines, chemical resistance •C  hips with high sulphur resistance
warehouses, mechanical workshops and labora- • Body: dark grey ABS with Al coolers (ABS Al) •L  ong lifetime due to low thermal resistance
tories without a danger of explosion of gas, dust = high chemical resistance
and combustible fumes. • Up to 55 % lower electricity consumption when
compared to tubes T5
The light fitting is resistant to dust, moisture and • In DALI version possibility of constant luminous
spouting water. The body made of ABS and the flux for whole lifetime (CLO)
diffuser made of AC have increased chemical • Constant luminous flux even in ambient tem-
resistance. perature of -25 °C

(It is necessary to consider exhalation in the air

which can reduce the usability of the plastic and
aluminium at installations in an aggressive envi-
ronment, see also page 325). up to up to
LED
50ºC -25ºC
Always open the cover of the light fitting out of an
CRI
environment with aggressive volatile substances. 220-240 V DALI L 90
>80 B 10

HACCP

CZECH LIGHT FITTINGS 123

 FUTURA HE ABS Al, ABSc Al

FUTURA HE A BS Al, ABSc Al

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 •R  eflector: steel sheet, white colour (RAL 9003)
• Maximum ambient temperature: ta = 50  °C, • Clips: polyamide + 15 % glass fibre or stainless
Maximum ambient temperature: ta = 0-25 °C steel + polyamide
(version with emergency back-up source for • Sealing: polyurethane (PUR), foamed body
1 or 3 hours; M1h, M3h) groove
• Maximum system efficacy: 166 lm/W •C  able glands: screwed PG 13.5
• The watt and lumen values can vary by ± 7,5 % •D  istance part: polyamide + 10 % glass fibre
• Standard model - CRI > 80: 4000 K • Terminal block: screwless, three-pole (basic
• MacAdam = 3 SDCM version)
• Lifetime: 50,000 hours / L90B10 • Installation: package contains stainless hooks
• Diffuser: translucent acrylate (AC), UV stable, and stainless brackets
chemically resistant • Electric equipment: LED sulphur-resistant
• Body: dark grey ABS with Al coolers (ABS Al), UV modules, current driver or current driver DALI
stable, chemically resistant

FUTURA 2.4ft HE ABS

150° 180° 150°

A
120° 120°
D 145

90° 90°

111
100
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Code Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 50 °C - body: dark grey ABS with Al coolers - diffuser: translucent acrylate
11200 FUTURA 2.2ft HE ABS Al 3200/840 50 3340 2940 20 147 1,7 612 475
11210 FUTURA 2.2ft HE ABS Al 4400/840 45 4500 3960 26 152 1,7 612 475
11203 FUTURA 2.2ft HE ABS Al 6400/840 35 6530 5750 37 155 1,7 612 475
11206 FUTURA 2.4ft HE ABS Al 6400/840 50 6580 5790 37 156 3,0 1172 700
11220 FUTURA 2.4ft HE ABS Al 8800/840 45 9210 8100 51 159 3,0 1172 700
11216 FUTURA 2.4ft HE ABS Al 12800/840 35 13430 11820 72 164 3,0 1172 700
11219 FUTURA 2.5ft HE ABS Al 8000/840 50 8460 7440 46 162 3,9 1452 940
11230 FUTURA 2.5ft HE ABS Al 11000/840 45 11340 9980 62 161 3,9 1452 940
11241 FUTURA 2.5ft HE ABS Al 16000/840 35 16740 14730 89 166 3,9 1452 940
103423 FUTURA 2.5ft HE ABS Al 22000/840 35 22640 19920 128 156 4,0 1452 940

FUTURA HE ABS Al Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

11200 FUTURA 2.2ft HE ABS Al 3200/840 x x 11201 11202 x x
11210 FUTURA 2.2ft HE ABS Al 4400/840 x x 11214 11215 x x
11203 FUTURA 2.2ft HE ABS Al 6400/840 x x 11204 11205 x x
11206 FUTURA 2.4ft HE ABS Al 6400/840 11207 11208 11209 11211 11212 11213
11220 FUTURA 2.4ft HE ABS Al 8800/840 11221 11223 11224 11225 11226 11227
11216 FUTURA 2.4ft HE ABS Al 12800/840 11217 11218 x x x x
11219 FUTURA 2.5ft HE ABS Al 8000/840 11222 11228 11229 11232 11238 11239
11230 FUTURA 2.5ft HE ABS Al 11000/840 11231 11233 11234 11235 11236 11237
11241 FUTURA 2.5ft HE ABS Al 16000/840 11242 11243 x x x x
103423 FUTURA 2.5ft HE ABS Al 22000/840 103426 103427 x x x x

FUTURA HE ABSc Al Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

11246 FUTURA 2.2ft HE ABSc Al 3200/840 x x 11247 11248 x x
11240 FUTURA 2.2ft HE ABSc Al 4400/840 x x 11244 11245 x x
11249 FUTURA 2.2ft HE ABSc Al 6400/840 x x 11252 11258 x x
11259 FUTURA 2.4ft HE ABSc Al 6400/840 11262 11268 11269 11271 11272 11273
11250 FUTURA 2.4ft HE ABSc Al 8800/840 11251 11253 11254 11255 11256 11257
11276 FUTURA 2.4ft HE ABSc Al 12800/840 11277 11278 x x x x
11279 FUTURA 2.5ft HE ABSc Al 8000/840 11282 11288 11289 11292 11298 11299
11260 FUTURA 2.5ft HE ABSc Al 11000/840 11261 11263 11264 11265 11266 11267
11301 FUTURA 2.5ft HE ABSc Al 16000/840 11302 11303 x x x x
103430 FUTURA 2.5ft HE ABSc Al 22000/840 103431 103425 x x x x

Example of type marking: 11256 = FUTURA 2.4ft HE ABSc Al 8800/840 3F M1h

124
 FUTURA HE ABS Al, ABSc Al

FUTURA HE ABS Al DALI Digital dimmable driver DALI - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

11306 FUTURA 2.2ft HE ABS Al 3200/840 DALI x x 11307 11308 x x
11270 FUTURA 2.2ft HE ABS Al 4400/840 DALI x x 11274 11275 x x
11309 FUTURA 2.2ft HE ABS Al 6400/840 DALI x x 11312 11318 x x
11319 FUTURA 2.4ft HE ABS Al 6400/840 DALI 11322 11328 11329 11330 11331 11332
11280 FUTURA 2.4ft HE ABS Al 8800/840 DALI 11281 11283 11284 11285 11286 11287
11333 FUTURA 2.4ft HE ABS Al 12800/840 DALI 11334 11335 x x x x
11336 FUTURA 2.5ft HE ABS Al 8000/840 DALI 11337 11338 11339 11340 11341 11342
11290 FUTURA 2.5ft HE ABS Al 11000/840 DALI 11291 11293 11294 11295 11296 11297
11343 FUTURA 2.5ft HE ABS Al 16000/840 DALI 11344 11345 x x x x
103430 FUTURA 2.5ft HE ABSc Al 22000/840 103431 103425 x x x x

FUTURA HE ABSc Al DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

11346 FUTURA 2.2ft HE ABSc Al 3200/840 DALI x x 11347 11348 x x
11300 FUTURA 2.2ft HE ABSc Al 4400/840 DALI x x 11304 11305 x x
11349 FUTURA 2.2ft HE ABSc Al 6400/840 DALI x x 11350 11351 x x
11352 FUTURA 2.4ft HE ABSc Al 6400/840 DALI 11353 11354 11355 11356 11357 11358
11310 FUTURA 2.4ft HE ABSc Al 8800/840 DALI 11311 11313 11314 11315 11316 11317
11359 FUTURA 2.4ft HE ABSc Al 12800/840 DALI 11360 11361 x x x x
11362 FUTURA 2.5ft HE ABSc Al 8000/840 DALI 11363 11364 11365 11366 11367 11368
11320 FUTURA 2.5ft HE ABSc Al 11000/840 DALI 11321 11323 11324 11325 11326 11327
11369 FUTURA 2.5ft HE ABSc Al 16000/840 DALI 11370 11371 x x x x
103432 FUTURA 2.5ft HE ABSc Al 22000/840 DALI 103433 103434 x x x x

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) Attachment with the use of side hangers to the wall

LIGHT FITTING DETAILED VIEW

FUTURA HE ABS

CZECH LIGHT FITTINGS 125

 FUTURA CLASS II

…w
 ith Class II insulation.

USE ADVANTAGES
It is suitable for industrial, warehouse and agri- •L  ight fitting protection IP66 •S  tandard model - CRI > 80: 4000 K
cultural buildings, sports premises, transport • Maximum ambient temperature up to ta = 50 °C • At request CRI > 80: 3000 K, 5000 K, 6500 K,
terminals, railway vehicle repair shops, plat- • Lifetime: 50,000 hours / L90B10 CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
forms, traction substations, depots, parking • Diffuser: translucent polycarbonate (PC) = high • It can be delivered in dimmable or emergency
lots and garages, workshops and laboratories mechanical resistance version
without explosion hazard. • Body: grey polycarbonate (PC) = high mechani- • Available in ABS chemical resistant version
cal resistance • Through-wiring of up to 6 wires at body (2.4ft
The light fitting resists dust, humidity and spout- • Up to 45 % lower electricity consumption when and 2.5ft)
ing water. The body and the diffuser made of compared to tubes T5
PC material have high mechanical resistance • In DALI version possibility of constant luminous
against impact and deformation. flux for whole lifetime (CLO)
• Constant luminous flux even in ambient tem-
Easy, fast and maximally efficient mounting is perature of -25 °C
achieved when using the cables with connec-
tors delivered by us.

It is necessary to consider exhalation in the air

which can reduce the usability of the plastic and up to up to

aluminium at installations in an aggressive en- LED

50ºC -25ºC
vironment.
CRI
220-240 V DALI L 90
>80 B 10

HACCP

126
 FUTURA CLASS II PC, PCc

FUTURA CLASS II P C, PCc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 • Body: grey polycarbonate (PC), UV stable, im-
• Maximum ambient temperature: ta = 50 °C, pact-resistant
Maximum ambient temperature: ta = 0-25 °C •R  eflector: steel sheet, white colour (RAL 9003)
(version with emergency back-up source for • Clips: polyamide + 15 % glass fibre or stainless
1 or 3 hours; M1h, M3h) steel + polyamide
• Maximum system efficacy: 161 lm/W • Sealing: polyurethane (PUR), foamed body groove
• AWEX emergency light module generates a lu- •C  able glands: screwed PG 13.5
minous flux of 440 lm •D  istance part: polyamide + 10 % glass fibre
• The watt and lumen values can vary by ± 7,5 % • Terminal block: Connectors with 2, 4 or 6 poles,
• Standard model - CRI > 80: 4000 K wire section 1.5 or 2.5 mm
• MacAdam = 3 SDCM • Installation: package contains stainless hooks
• Lifetime: 50,000 hours / L90B10 and stainless brackets
• Diffuser: translucent polycarbonate (PC), UV • Electric equipment: LED modules, current driv-
stable, impact-resistant er or current driver DALI

FUTURA CLASS II 2.4ft

150° 180° 150°

A
120° 120°
D 145

90° 90°

111
100
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Code Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 50 °C - body: grey polycarbonate with Al coolers - diffuser: translucent polycarbonate
47550 FUTURA 2.2ft CLASS II PC 2600/840 50 2630 2470 16 154 1,5 612 475
47560 FUTURA 2.2ft CLASS II PC 3200/840 50 3110 2920 19 154 1,5 612 475
47570 FUTURA 2.2ft CLASS II PC 4400/840 45 4390 4130 27 153 1,7 612 475
47580 FUTURA 2.4ft CLASS II PC 5200/840 50 5150 4840 31 156 2,9 1172 700
47590 FUTURA 2.4ft CLASS II PC 6400/840 50 6260 5880 37 159 2,9 1172 700
47600 FUTURA 2.4ft CLASS II PC 8800/840 45 8710 8190 51 161 3,0 1172 700
47620 FUTURA 2.5ft CLASS II PC 6500/840 50 6380 6000 38 158 3,8 1452 940
47630 FUTURA 2.5ft CLASS II PC 8000/840 50 7750 7290 46 158 3,9 1452 940
47640 FUTURA 2.5ft CLASS II PC 11000/840 45 12050 11330 71 160 3,9 1452 940

47560 FUTURA 2.2ft CLASS II PC 3200/840 = suitable replacement for T8 fl. tube light fitting PRIMA 218 – 2 × 18 W
47590 FUTURA 2.4ft CLASS II PC 6400/840 = suitable replacement for T8 fl. tube light fitting PRIMA 236 – 2 × 36 W
47630 FUTURA 2.5ft CLASS II PC 8000/840 = suitable replacement for T8 fl. tube light fitting PRIMA 258 – 2 × 58 W

FUTURA CLASS II PC Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

47550 FUTURA 2.2ft CLASS II PC 2600/840 x x 47554 47555 x x
47560 FUTURA 2.2ft CLASS II PC 3200/840 x x 47564 47565 x x
47570 FUTURA 2.2ft CLASS II PC 4400/840 x x 47574 47575 x x
47580 FUTURA 2.4ft CLASS II PC 5200/840 47581 47583 47584 47585 47586 47587
47590 FUTURA 2.4ft CLASS II PC 6400/840 47591 47593 47594 47595 47596 47597
47600 FUTURA 2.4ft CLASS II PC 8800/840 47601 47603 47604 47605 47606 47607
47620 FUTURA 2.5ft CLASS II PC 6500/840 47621 47623 47624 47625 47626 47627
47630 FUTURA 2.5ft CLASS II PC 8000/840 47631 47633 47634 47635 47636 47637
47640 FUTURA 2.5ft CLASS II PC 11000/840 47641 47643 47644 47645 47646 47647

FUTURA CLASS II PCc Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

47660 FUTURA 2.2ft CLASS II PCc 2600/840 x x 47664 47665 x x
47670 FUTURA 2.2ft CLASS II PCc 3200/840 x x 47674 47675 x x
47680 FUTURA 2.2ft CLASS II PCc 4400/840 x x 47684 47685 x x
47690 FUTURA 2.4ft CLASS II PCc 5200/840 47691 47693 47694 47695 47696 47697
47700 FUTURA 2.4ft CLASS II PCc 6400/840 47701 47703 47704 47705 47706 47707
47710 FUTURA 2.4ft CLASS II PCc 8800/840 47711 47713 47714 47715 47716 47717
47730 FUTURA 2.5ft CLASS II PCc 6500/840 47731 47733 47734 47735 47736 47737
47740 FUTURA 2.5ft CLASS II PCc 8000/840 47741 47743 47744 47745 47746 47747
47750 FUTURA 2.5ft CLASS II PCc 11000/840 47751 47753 47754 47755 47756 47757

Example of type marking: 47717 = FUTURA 2.4ft CLASS II PCc 8800/840 3F M3h

CZECH LIGHT FITTINGS 127

 FUTURA CLASS II PC, PCc

FUTURA CLASS II PC DALI Digital dimmable driver DALI - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

47770 FUTURA 2.2ft CLASS II PC 2600/840 DALI x x 47774 47775 x x
47780 FUTURA 2.2ft CLASS II PC 3200/840 DALI x x 47784 47785 x x
47790 FUTURA 2.2ft CLASS II PC 4400/840 DALI x x 47794 47795 x x
47800 FUTURA 2.4ft CLASS II PC 5200/840 DALI 47801 47803 47804 47805 47806 47807
47810 FUTURA 2.4ft CLASS II PC 6400/840 DALI 47811 47813 47814 47815 47816 47817
47820 FUTURA 2.4ft CLASS II PC 8800/840 DALI 47821 47823 47824 47825 47826 47827
47840 FUTURA 2.5ft CLASS II PC 6500/840 DALI 47841 47843 47844 47845 47846 47847
47850 FUTURA 2.5ft CLASS II PC 8000/840 DALI 47851 47853 47854 47855 47856 47857
47860 FUTURA 2.5ft CLASS II PC 11000/840 DALI 47861 47863 47864 47865 47866 47867

FUTURA CLASS II PCc DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

47880 FUTURA 2.2ft CLASS II PCc 2600/840 DALI x x 47884 47885 x x
47890 FUTURA 2.2ft CLASS II PCc 3200/840 DALI x x 47894 47895 x x
47900 FUTURA 2.2ft CLASS II PCc 4400/840 DALI x x 47904 47905 x x
47910 FUTURA 2.4ft CLASS II PCc 5200/840 DALI 47911 47913 47914 47915 47916 47917
47920 FUTURA 2.4ft CLASS II PCc 6400/840 DALI 47921 47923 47924 47925 47926 47927
47930 FUTURA 2.4ft CLASS II PCc 8800/840 DALI 47931 47933 47934 47935 47936 47937
47950 FUTURA 2.5ft CLASS II PCc 6500/840 DALI 47951 47953 47954 47955 47956 47957
47960 FUTURA 2.5ft CLASS II PCc 8000/840 DALI 47961 47963 47964 47965 47966 47967
47970 FUTURA 2.5ft CLASS II PCc 11000/840 DALI 47971 47973 47974 47975 47976 47977
Example of type marking: 47966 = FUTURA CLASS II 2.5ft PCc 8000/840 DALI 3F M1h

LEGEND
CLASS II 1F 1-phase 2 core through-wiring in the luminaire
CLASS II 3F 3-phase 4 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination
CLASS II 3F Mxh 3-phase 4 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)

DALI version with digital dimmable driver DALI

CLASS II DALI 1F 1-phase 4 core through-wiring in the luminaire
CLASS II DALI 3F 3-phase 6 core through-wiring in the luminaire
CLASS II DALI 3F Mxh 3-phase 6 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)

128
 FUTURA CLASS II PC, PCc

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) Attachment with the use of side hangers to the wall

LIGHT FITTING DETAILED VIEW

FUTURA CLASS II

STUCCHI 37xx WIELAND

CZECH LIGHT FITTINGS 129

 FUTURA MAX

... for extreme temperatures -40 °C to +70 °C.

USE ADVANTAGES
The light fitting is suitable for indoor and outdoor • Light fitting protection IP66 • Up to 45 % lower electricity consumption when
spaces with roof with extreme ambient tempera- • Minimum ambient temperature up to ta = -40 °C compared to tubes T5
tures from (-40 °C to +70 °C). The light fitting is • Maximum ambient temperature up to ta = 70 °C • Constant luminous flux even in ambient tem-
destined mainly for heating stations, metallurgi- • Lifetime: 50,000 hours / L80B10 perature of -40 °C
cal lines, glass-works, as well as for freezers, • Possibility of using in even higher ambient • Standard model - CRI > 80: 4000 K
cooling plants and other premises without dan- temperatures under the condition of a short- • At request CRI > 80: 3000 K, 5000 K
ger of explosion of gases, dusts and flammable ened service life of the light fitting – param- •T  hrough-wiring of up to 10 wires at body
vapors. eters solved within a particular project •C  ertification: HACCP
• Diffuser: translucent polycarbonate (PC) = high
The light fitting is resistant to dust, moisture and mechanical resistance
spouting water. The body and the diffuser made • Body: grey polycarbonate with Al coolers
of polycarbonate (PC) have the increased resist- (PC Al) = high mechanical resistance
ance against deformation and impact.

(It is necessary to consider exhalation in the air

which can reduce the usability of the plastic and
aluminium at installations in an aggressive envi-
ronment, see also page 325). up to up to
LED
70ºC -40ºC

CRI
220-240 V L 80
>80 B 10

HACCP

130
 FUTURA MAX PCc Al

FUTURA MAX P Cc Al
TECHNICAL DESCRIPTION
• Light fitting protection: IP66 •R  eflector: steel sheet, white colour (RAL 9003)
• Minimum ambient temperature: ta = -40 °C • Ventilation plug: type BVPB-01 made of polyam-
• Maximum ambient temperature: ta = 70 °C ide, size M12 × 1.5
• Lifetime: 50,000 hours / L80B10 •C  lips: stainless steel + polyamide
• Possibility of using in even higher ambient tem- • Sealing: polyurethane (PUR), foamed body
peratures under the condition of a shortened groove
service life of the light fitting – parameters •C  able glands: screwed PG 13.5
solved within a particular project •D  istance part: polyamide + 10 % glass fibre
• Maximum system efficacy: 161 lm/W • Terminal block: screwless, three-pole (basic
• The watt and lumen values can vary by ± 7,5 % version)
• Standard model - CRI > 80: 4000 K • Installation: package contains stainless hooks
• MacAdam = 3 SDCM and stainless brackets
• Diffuser: translucent polycarbonate (PC), UV • Electric equipment: LED modules, current
stable, impact-resistant driver
• Body: grey polycarbonate with Al coolers (PC
Al), UV stable, impact-resistant

FUTURA MAX 2.4ft

150° 180° 150°

A
120° 120°
D 145

90° 90°

111
100
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Code Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 70 °C - body: grey polycarbonate with Al coolers - diffuser: translucent polycarbonate
79820 FUTURA 1.5ft MAX PCc Al 4000/840 70 3880 3650 24 152 3,6 1452 940
79830 FUTURA 1.5ft MAX PCc Al 5500/840 65 5420 5090 33 154 3,6 1452 940
79840 FUTURA 2.4ft MAX PCc Al 6400/840 65 6260 5880 37 159 3,0 1172 700
79800 FUTURA 2.4ft MAX PCc Al 8800/840 60 8710 8190 51 161 3,0 1172 700
79850 FUTURA 2.5ft MAX PCc Al 8000/840 65 7750 7290 46 158 3,9 1452 940
79810 FUTURA 2.5ft MAX PCc Al 11000/840 60 12050 11330 71 160 3,9 1452 940

FUTURA MAX PCc Al Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h DALI DALI 3F

79820 FUTURA 1.5ft MAX PCc Al 4000/840 79821 79823 x x 79825 79826
79830 FUTURA 1.5ft MAX PCc Al 5500/840 79831 79833 x x 79835 79836
79840 FUTURA 2.4ft MAX PCc Al 6400/840 79841 79843 x x 79845 79846
79800 FUTURA 2.4ft MAX PCc Al 8800/840 79801 79803 x x 79805 79806
79850 FUTURA 2.5ft MAX PCc Al 8000/840 79851 79853 x x 79855 79856
79810 FUTURA 2.5ft MAX PCc Al 11000/840 79811 79813 x x 79815 79816

Example of type marking: 79813 = FUTURA MAX 2.5ft PCc Al 11000/840 3F

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

CZECH LIGHT FITTINGS 131

 FUTURA MAX PCc Al

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) Attachment with the use of side hangers to the wall

LIGHT FITTING DETAILED VIEW

FUTURA MAX

132
FUTURA SNS

... dustproof, waterproof and impact-resistant.

USE ADVANTAGES
The light fitting is suitable for industrial indoor • Light fitting protection IP66 • Standard model - CRI > 80: 4000 K
and outdoor roofed spaces, warehouses, sports • Maximum ambient temperature up to ta = 50 °C •A  t request CRI > 80: 3000 K, 5000 K, 6500 K,
areas, workshops, garages, transport terminals, • Lifetime: 50,000 hours / L90B10 CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
utility structures and laboratories without a dan- • Diffuser: translucent polycarbonate (PC) = high • With built-in microwave motion sensor
ger of explosion of gas, dust and combustible mechanical resistance • The possibility of setting the sensor using the
fumes. • Body: grey polycarbonate with Al coolers DIP switch
(PC Al) = high mechanical resistance • It can be delivered in dimmable or emergency
The light fitting is resistant to dust, moisture and • Up to 45 % lower electricity consumption when version
spouting water. The body and the diffuser made compared to tubes T5 •T  hrough-wiring of up to 10 wires at body
of polycarbonate (PC) have the increased resist- • Current driver with the possibility of constant •C  ertification: HACCP
ance against deformation and impact. luminous flux for whole lifetime (CLO)
• Constant luminous flux even in ambient tem-
(It is necessary to consider exhalation in the air perature of -25 °C
which can reduce the usability of the plastic and
aluminium at installations in an aggressive envi-
ronment, see also page 325).

up to up to
LED
50ºC -25ºC

CRI
220-240 V DALI L 90
>80 B 10

HACCP

CZECH LIGHT FITTINGS 133

 FUTURA SNS PC Al, PCc Al

FUTURA SNS PC Al, PCc Al

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 • Clips: polyamide + 15 % glass fibre or stainless
• Maximum ambient temperature: ta = 50  °C, steel + polyamide
Maximum ambient temperature: ta = 0-25 °C • Sealing: polyurethane (PUR), foamed body
(version with emergency back-up source for groove
1 or 3 hours; M1h, M3h) •C  able glands: screwed PG 13.5
• Maximum system efficacy: 161 lm/W •D  istance part: polyamide + 10 % glass fibre
• The watt and lumen values can vary by ± 7,5 % • Terminal block: screwless, three-pole (basic
• Standard model - CRI > 80: 4000 K version)
• MacAdam = 3 SDCM • Installation: package contains stainless hooks
• Lifetime: 50,000 hours / L90B10 and stainless brackets
• Diffuser: translucent polycarbonate (PC), UV • Electric equipment: LED modules, current driv-
stable, impact-resistant er or digital dimmable driver DALI
• Body: grey polycarbonate with Al coolers (PC • Motion sensor: 360° range, switch on height
Al), UV stable, impact-resistant 1 – 6 m, time range 5 sec – 30 min, switch-on
• Reflector: steel sheet, white colour (RAL 9003) sensitivity 2 – 50 lux

FUTURA 2.4ft SNS

150° 180° 150°

A
120° 120°
D 145

90° 90°

111
100
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Code Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 50 °C - body: grey polycarbonate with Al coolers - diffuser: translucent polycarbonate
79010 FUTURA 2.2ft SNS PC Al 2600/840 50 2630 2470 16 154 1,5 612 475
79020 FUTURA 2.2ft SNS PC Al 3200/840 50 3110 2920 19 154 1,5 612 475
79030 FUTURA 2.2ft SNS PC Al 4400/840 45 4390 4130 27 153 1,7 612 475
79040 FUTURA 2.4ft SNS PC Al 5200/840 50 5150 4840 31 156 2,9 1172 700
79050 FUTURA 2.4ft SNS PC Al 6400/840 50 6260 5880 37 159 2,9 1172 700
79060 FUTURA 2.4ft SNS PC Al 8800/840 45 8710 8190 51 161 3,0 1172 700
79410 FUTURA 2.4ft SNS PC Al 12800/840 35 14000 13160 84 157 3,0 1172 700
79070 FUTURA 2.5ft SNS PC Al 6500/840 50 6380 6000 38 158 3,8 1452 940
79080 FUTURA 2.5ft SNS PC Al 8000/840 50 7750 7290 46 158 3,9 1452 940
79090 FUTURA 2.5ft SNS PC Al 11000/840 45 12050 11330 71 160 3,9 1452 940
79420 FUTURA 2.5ft SNS PC Al 16000/840 35 17550 16500 104 159 3,9 1452 940

79050 FUTURA 2.4ft SNS PC Al 6400/840 = suitable replacement for T8 fl. tube light fitting PRIMA 236 – 2 × 36 W
79080 FUTURA 2.5ft SNS PC Al 8000/840 = suitable replacement for T8 fl. tube light fitting PRIMA 258 – 2 × 58 W

FUTURA SNS PC Al Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

79010 FUTURA 2.2ft SNS PC Al 2600/840 x x 79014 x x x
79020 FUTURA 2.2ft SNS PC Al 3200/840 x x 79024 x x x
79030 FUTURA 2.2ft SNS PC Al 4400/840 x x 79034 x x x
79040 FUTURA 2.4ft SNS PC Al 5200/840 79140 79340 79044 79045 79344 79345
79050 FUTURA 2.4ft SNS PC Al 6400/840 79150 79350 79054 79055 79354 79355
79060 FUTURA 2.4ft SNS PC Al 8800/840 79160 79360 79064 79065 79364 79365
79410 FUTURA 2.4ft SNS PC Al 12800/840 79411 79412 x x x x
79070 FUTURA 2.5ft SNS PC Al 6500/840 79170 79370 79074 79075 79374 79375
79080 FUTURA 2.5ft SNS PC Al 8000/840 79180 79380 79084 79085 79384 79385
79090 FUTURA 2.5ft SNS PC Al 11000/840 79190 79390 79094 79095 79394 79395
79420 FUTURA 2.5ft SNS PC Al 16000/840 79421 79422 x x x x

FUTURA SNS PCc Al Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

79210 FUTURA 2.2ft SNS PCc Al 2600/840 x x 79214 x x x
79220 FUTURA 2.2ft SNS PCc Al 3200/840 x x 79224 x x x
79230 FUTURA 2.2ft SNS PCc Al 4400/840 x x 79234 x x x
79240 FUTURA 2.4ft SNS PCc Al 5200/840 79540 79640 79244 79245 79644 79645
79250 FUTURA 2.4ft SNS PCc Al 6400/840 79550 79650 79254 79255 79654 79655
79260 FUTURA 2.4ft SNS PCc Al 8800/840 79560 79660 79264 79265 79664 79665
79430 FUTURA 2.4ft SNS PCc Al 12800/840 79431 79432 x x x x
79270 FUTURA 2.5ft SNS PCc Al 6500/840 79570 79670 79274 79275 79674 79675
79280 FUTURA 2.5ft SNS PCc Al 8000/840 79580 79680 79284 79285 79684 79685
79290 FUTURA 2.5ft SNS PCc Al 11000/840 79590 79690 79294 79295 79694 79695
79440 FUTURA 2.5ft SNS PCc Al 16000/840 79441 79442 x x x x

Example of type marking: 79684 = FUTURA 2.5ft SNS PCc Al 8000/840 3F M1h

134
 FUTURA SNS PC Al, PCc Al

FUTURA SNS PC Al CORRIDOR Digital dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

79043 FUTURA 2.4ft SNS PC Al 5200/840 CORRIDOR 79143 79343 79047 79049 79347 79349
79053 FUTURA 2.4ft SNS PC Al 6400/840 CORRIDOR 79153 79353 79057 79059 79357 79359
79063 FUTURA 2.4ft SNS PC Al 8800/840 CORRIDOR 79163 79363 79067 79069 79367 79369
79073 FUTURA 2.5ft SNS PC Al 6500/840 CORRIDOR 79173 79373 79077 79079 79377 79379
79083 FUTURA 2.5ft SNS PC Al 8000/840 CORRIDOR 79183 79383 79087 79089 79387 79389
79093 FUTURA 2.5ft SNS PC Al 11000/840 CORRIDOR 79193 79393 79097 79099 79397 79399

FUTURA SNS PCc Al CORRIDOR Digital dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

79243 FUTURA 2.4ft SNS PCc Al 5200/840 CORRIDOR 79543 79643 79247 79249 79647 79649
79253 FUTURA 2.4ft SNS PCc Al 6400/840 CORRIDOR 79553 79653 79257 79259 79657 79659
79263 FUTURA 2.4ft SNS PCc Al 8800/840 CORRIDOR 79563 79663 79267 79269 79667 79669
79273 FUTURA 2.5ft SNS PCc Al 6500/840 CORRIDOR 79573 79673 79277 79279 79677 79679
79283 FUTURA 2.5ft SNS PCc Al 8000/840 CORRIDOR 79583 79683 79287 79289 79687 79689
79293 FUTURA 2.5ft SNS PCc Al 11000/840 CORRIDOR 79593 79693 79297 79299 79697 79699

Example of type marking: 79687 = FUTURA 2.5ft SNS PCc Al 8000/840 CORRIDOR 3F M1h

LEGEND
SNS 1F 1-phase 3 core through-wiring in the luminaire for connection of max. 5 slave luminaires
SNS 3F 3-phase 5 core through-wiring in the luminaire for connection of max. 5 slave luminaires (sensor connected to L3)
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination
SNS 3F Mxh 3-phase 5 core through-wiring in the luminaire for connection of max. 5 slave luminaires (sensor and emergency unit connected to L3)

CORRIDOR version with digital dimmable driver DALI and set corridor function
CORRIDOR 1F 1-phase 5 core through-wiring in the luminaire for connection of max. 20 luminaires
CORRIDOR 3F 3-phase 7 core through-wiring in the luminaire for connection of max. 20 luminaires (sensor connected to L3)
CORRIDOR 3F Mxh 3-phase 7 core through-wiring in the luminaire for connection of max. 20 luminaires (sensor and emergency unit connected to L3)

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) Attachment with the use of side hangers to the wall

LIGHT FITTING DETAILED VIEW

FUTURA SNS

CZECH LIGHT FITTINGS 135

 FUTURA accessories

Through-wiring cables
Additional furnishing of 1 phase, 3 phase or multi-phase through-wiring in the body to the light fitting.

Weight
Code Type Description
[kg]
11995 Z1F-2.4 1 phase cables for through-wiring at body 2.4ft 0,1
11996 Z1F-2.5 1 phase cables for through-wiring at body 2.5ft 0,1

Weight
Code Type Description
[kg]
11997 Z3F-2.4 3 phase cables for through-wiring at body 2.4ft 0,1
11998 Z3F-2.5 3 phase cables for through-wiring at body 2.5ft 0,1

Weight
Code Type Description
[kg]
11987 Z2x3F-2.4 2x 3 phase cables for through-wiring at body 2.4ft 0,1
11988 Z2x3F-2.5 2x 3 phase cables for through-wiring at body 2.5ft 0,1

OM – protective grid
The metal grid protects the light fitting against mechanical damage and unauthorised handling. It is attached to the surface with the use of screws.
The surface is treated with the RAL 9003 powder-coated colour.

Weight
Code Type Description
[kg]
11941 OM 218 protective grid for types 218, 214/224, 2.2ft (700 × 220 × 130 mm) 1,0
11942 OM 236 protective grid for types 236, 228/254, 2.4ft (1300 × 220 × 130 mm) 1,7
11943 OM 258 protective grid for types 258, 235/249/280, 2.5ft (1600 × 220 × 130 mm) 2,0

BZ – side hanger
It serves to attach the light fitting to the wall with the possibility of its positioning.

Weight
Code Type Description
[kg]
90002 BZ side hanger with blocking (set for 1 light fitting) 0,4

Canalis busbar system connector

The connector enables a quick 1 phase or 3 phase interconnection of light fittings without their opening.

Weight
Code Type Description
[kg]
79001 KBA 40 ZU light fitting suspended holder - Canalis KBA system 0,1
70002 KBC 10 CC211 connector with 1 m cable - Canalis KBA system 0,2

136
 FUTURA accessories

Light fitting inputs

The version with four inputs in the body side for types 2.4ft and 2.5ft can be made-to-order.

Stucchi or Wieland connector

The connector enables a quick 1 phase or 3 phase interconnection of light fittings without their opening.

CZECH LIGHT FITTINGS 137

FROST

INDUSTRIAL
PLASTIC
DUSTPROOF
WATERPROOF
FROSTPROOF
IMPACT-RESISTANT
 PRODUCT OVERVIEW

FROST – industrial plastic LED light fitting

FROST
page 140

IP66 FROST
page 140

FROST PLUS
page 143

IP66 FROST PLUS

page 143

www.bim.lighting/en

CZECH LIGHT FITTINGS 139

 FROST

… for cold stores and freezing facilities with temperatures

down to -25 °C
USE ADVATAGES
Temperatures of chilled foods range from 0–5 • Light fitting protection IP66 • Standard model - CRI > 80: 4000 K
degrees, whilst in freezing facilities can drop • Minimum ambient temperature down to ta = • At request CRI > 80: 3000 K, 5000 K, 6500 K,
up to -25 degrees Celsius. Suitable luminaires -25 °C CRI > 90: 3000 K, 4000 K
for such demanding environments must handle • Lifetime: 50,000 hours / L90B10 • It can be delivered in dimmable or emergency
extreme low temperatures, withstand condensa- • Diffuser: translucent acrylate (AC), UV stable, version
tion and vapors, have low maintenance and long chemically resistant •T  hrough-wiring of up to 5 wires at body
service life to keep costs low. • Body: dark grey ABS, UV stable, chemically re- • Certification: CE
sistant
Our lighting fixture for freezing storage and • Constant luminous flux even in ambient tem-
chilled storage saroundings is made of ABS ma- peratures up to -25 °C
terial, is weather-proofed and chemically resist-
ant (IP66 and IK 06).

FROST provide with high quality and good solu-

tion enduring a long service life of 50 000 hours.

up to up to
LED
25ºC -25ºC

CRI
220-240 V DALI L 90
>80 B 10

140
 FROST

FROST
TECHNICAL DESCRIPTION
• Light fitting protection: IP66 •R  eflector: steel sheet, white colour (RAL 9003)
• Minimum ambient temperature: ta = -25  °C, •C  lips: polyamide + 15 % glass fibre
Maximum ambient temperature: ta = 25  °C •S  ealing: polyurethane (PUR), foamed body
(version with emergency back-up source for 3 groove
hours; M3h) •C  able glands: screwed PG 13.5
• Maximum system efficacy: 150 lm/W •D  istance part: polyamide + 10 % glass fibre
• The watt and lumen values can vary by ± 7,5 % •T  erminal block: screwless, three-pole (basic
• Standard model - CRI > 80: 4000 K version)
• MacAdam = 3 SDCM • Installation: package contains stainless hooks
• Lifetime: 50,000 hours / L90B10 and stainless brackets
• Diffuser: translucent acrylate (AC), UV stable, •E  lectric equipment: LED modules, current
chemically resistant driver
• Body: dark grey ABS, UV stable, chemically
resistant

2.4ft ABS
150° 180° 150°

A
120° 120°
D 145

90° 90°

111
100
C0 60° 60°

C90
30° 0° 30°

Min. ambient Luminous flux Luminous flux Power System Net

A D
Code Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[ °C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature down to ta = 25  °C - body: dark grey - diffuser: translucent acrylate
103094 FROST 2.4ft 5200/840 -25 5150 4530 31 146 2,7 1172 700
103095 FROST 2.4ft 6400/840 -25 6260 5510 37 149 2,7 1172 700
103096 FROST 2.4ft 8800/840 -25 8710 7660 51 150 2,8 1172 700
103097 FROST 2.5ft 6500/840 -25 6380 5610 38 148 3,5 1452 940
103098 FROST 2.5ft 8000/840 -25 7750 6820 46 148 3,6 1452 940
103099 FROST 2.5ft 11000/840 -25 12050 10600 71 149 3,6 1452 940

Battery heating consumption 10W

FROST Non-dimmable driver - plastic clips

Code Type 3F M3h 3F M3h

103094 FROST 2.4ft 5200/840 103100 103106 103112
103095 FROST 2.4ft 6400/840 103101 103107 103113
103096 FROST 2.4ft 8800/840 103102 103108 103114
103097 FROST 2.5ft 6500/840 103103 103109 103115
103098 FROST 2.5ft 8000/840 103104 103110 103116
103099 FROST 2.5ft 11000/840 103105 103111 103117

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

CZECH LIGHT FITTINGS 141

 FROST

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) Attachment with the use of side hangers to the wall

LIGHT FITTING DETAILED VIEW

FROST

142
FROST PLUS

… for cold stores and freezing facilities with temperatures

down up to -40 °C
USE ADVATAGES
Temperatures of chilled foods range from 0–5 • Light fitting protection IP66 • Standard model - CRI > 80: 4000 K
degrees, whilst in freezing facilities can drop • Minimum ambient temperature down to ta = • At request CRI > 80: 3000 K, 5000 K, 6500 K,
up to –40 degrees Celsius. Suitable luminaires -40 °C CRI > 90: 3000 K, 4000 K
for such demanding environments must handle • Lifetime: 50,000 hours / L90B10 • It can be delivered in dimmable version
extreme low temperatures, withstand condensa- • Diffuser: translucent acrylate (AC), UV stable, •T  hrough-wiring of up to 5 wires at body
tion and vapors, have low maintenance and long chemically resistant • Certification: CE
service life to keep costs low. • Body: dark grey ABS, UV stable, chemically re-
sistant
Our lighting fixture for freezing storage and
chilled storage saroundings is made of ABS ma-
terial, is weather-proofed and chemically resist-
ant (IP66 and IK 06).

FROST PLUS provide with high quality and good

solution enduring a long service life of 50 000
hours.

up to up to
LED
25ºC -40ºC

CRI
220-240 V DALI L 90
>80 B 10

CZECH LIGHT FITTINGS 143

 FROST PLUS

FROST PLUS
TECHNICAL DESCRIPTION
• Light fitting protection: IP66 •S  ealing: polyurethane (PUR), foamed body
• Minimum ambient temperature: ta = -40  °C groove
• Maximum ambient temperature: ta = 0-25  °C •C  able glands: screwed PG 13.5
• Maximum system efficacy: 150 lm/W •D  istance part: polyamide + 10 % glass fibre
• The watt and lumen values can vary by ± 7,5 % •T  erminal block: screwless, three-pole (basic
• Standard model - CRI > 80: 4000 K version)
• MacAdam = 3 SDCM • Installation: package contains stainless hooks
• Lifetime: 50,000 hours / L90B10 and stainless brackets
• Diffuser: translucent acrylate (AC), UV stable, •E  lectric equipment: LED modules, current
chemically resistant driver
• Body: dark grey ABS, UV stable, chemically
resistant
• Reflector: steel sheet, white colour (RAL 9003)
• Clips: polyamide + 15 % glass fibre

2.4ft ABS
150° 180° 150°

A
120° 120°
D 145

90° 90°

111
100
C0 60° 60°

C90
30° 0° 30°

Min. ambient Luminous flux Luminous flux Power System Net

A D
Code Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[ °C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature down to ta = 25  °C - body: dark grey - diffuser: translucent acrylate
103122 FROST PLUS 2.4ft 5200/840 -40 5150 4530 31 146 2,7 1172 700
103123 FROST PLUS 2.4ft 6400/840 -40 6260 5510 37 149 2,7 1172 700
103124 FROST PLUS 2.4ft 8800/840 -40 8710 7660 51 150 2,8 1172 700
103125 FROST PLUS 2.5ft 6500/840 -40 6380 5610 38 148 3,5 1452 940
103126 FROST PLUS 2.5ft 8000/840 -40 7750 6820 46 148 3,6 1452 940
103127 FROST PLUS 2.5ft 11000/840 -40 12050 10600 71 149 3,6 1452 940

Battery heating consumption 10W

FROST PLUS Non-dimmable driver - plastic clips

Code Type 3F
103122 FROST PLUS 2.4ft 5200/840 103128
103123 FROST PLUS 2.4ft 6400/840 103129
103124 FROST PLUS 2.4ft 8800/840 103130
103125 FROST PLUS 2.5ft 6500/840 103131
103126 FROST PLUS 2.5ft 8000/840 103132
103127 FROST PLUS 2.5ft 11000/840 103133

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

144
 FROST PLUS

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) Attachment with the use of side hangers to the wall

LIGHT FITTING DETAILED VIEW

FROST PLUS

CZECH LIGHT FITTINGS 145

MIDLLE EAST Ta 55

INDUSTRIAL
PLASTIC
DUSTPROOF
WATERPROOF
HEAT RESISTANT
IMPACT-RESISTANT
 PRODUCT OVERVIEW

MIDLLE EAST Ta 55 – industrial plastic LED light fitting

MIDLLE EAST Ta 55
page 148

IP66 MIDLLE EAST Ta 55

page 148

www.bim.lighting/en

CZECH LIGHT FITTINGS 147

 MIDDLE EAST Ta 55 NEW

... for high temperature.

USE ADVANTAGES
The light fitting is suitable for industrial indoor •L  ight fitting protection IP66 perature of -25 °C
and outdoor roofed spaces, warehouses, sports • Maximum ambient temperature up to ta = 55 °C • Standard model - CRI > 80: 4000 K
areas, workshops, garages, transport terminals, • Lifetime: 50,000 hours / L90B10 • At request CRI > 80: 3000 K, 5000 K, 6500 K,
utility structures and laboratories without a dan- • ABS - on request CRI > 90: 3000 K, 4000 K
ger of explosion of gas, dust and combustible • Diffuser: translucent polycarbonate (PC) = high • Through-wiring of up to 7 wires at bodies of
fumes. mechanical resistance 1.4ft and 1.5ft type light fittings
• Body: grey polycarbonate (PC) = high mechani-
The light fitting is resistant to dust, moisture and cal resistance
spouting water. The body and the diffuser made • Up to 45 % lower electricity consumption when
of polycarbonate (PC) have the increased resis- compared to tubes T5
tance against deformation and impact. • Constant luminous flux even in ambient tem-

It is necessary to consider exhalation in the air

which can reduce the usability of the plastic at
installations in an aggressive environment.

up to up to
LED
55ºC -25ºC

CRI
220-240 V L 90 DALI
>80 B 10

148
 MIDDLE EAST Ta 55 PC, PCc

MIDDLE EAST Ta 55 P C, PCc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 • Sealing: polyurethane (PUR), foamed body
• Maximum ambient temperature: ta = 55 °C groove
• Maximum system efficacy: 160 lm/W •C  able glands: screwed PG 13.5
• The watt and lumen values can vary by ± 7,5 % •D  istance part: polyamide + 10 % glass fibre
• Standard model - CRI > 80: 4000 K • Terminal block: screwless, three-pole (basic
• Lifetime: 50,000 hours / L90B10 version)
• Diffuser: translucent polycarbonate (PC), UV • Installation: package contains stainless hooks
stable, impact-resistant and stainless brackets
• Body: grey polycarbonate (PC), UV stable, im- • Electric equipment: LED modules, current driv-
pact-resistant er, DALI driver.
• Reflector: steel sheet, white colour (RAL 9003)
• Clips: polyamide + 15 % glass fibre or stainless
steel + polyamide

MIDDLE EAST Ta 55 1.4ft

150° 180° 150°

A
120° 120°
D 145

90° 90°

111
100
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Code Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 55 °C - body: grey polycarbonate - diffuser: translucent polycarbonate
51510 MIDDLE EAST Ta 55 1.2ft PC 2200/840 55 2560 2410 16 151 1,3 612 475
51515 MIDDLE EAST Ta 55 1.2ft PC 3200/840 55 3620 3400 23 148 1,3 612 475
51520 MIDDLE EAST Ta 55 1.4ft PC 4400/840 55 5070 4770 31 154 1,9 1172 700
51525 MIDDLE EAST Ta 55 1.4ft PC 6400/840 55 7300 6860 44 156 1,9 1172 700
51530 MIDDLE EAST Ta 55 1.5ft PC 5500/840 55 6320 5940 38 156 2,3 1452 940
51535 MIDDLE EAST Ta 55 1.5ft PC 8000/840 55 9030 8490 53 160 2,3 1452 940

MIDDLE EAST Ta 55 PC plastic clips

Code Type 1F 3F DALI

51510 MIDDLE EAST Ta 55 1.2ft PC 2200/840 x x
51515 MIDDLE EAST Ta 55 1.2ft PC 3200/840 x x 51524
51520 MIDDLE EAST Ta 55 1.4ft PC 4400/840 51521 51522 51523
51525 MIDDLE EAST Ta 55 1.4ft PC 6400/840 51526 51527 51533
51530 MIDDLE EAST Ta 55 1.5ft PC 5500/840 51531 51532 51528
51535 MIDDLE EAST Ta 55 1.5ft PC 8000/840 51536 51537 51538

MIDDLE EAST Ta 55 PCc stainless clips (c)

Code Type 1F 3F DALI

51540 MIDDLE EAST Ta 55 1.2ft PCc 2200/840 x x
51545 MIDDLE EAST Ta 55 1.2ft PCc 3200/840 x x 51529
51550 MIDDLE EAST Ta 55 1.4ft PCc 4400/840 51551 51552 51553
51555 MIDDLE EAST Ta 55 1.4ft PCc 6400/840 51556 51557 51563
51560 MIDDLE EAST Ta 55 1.5ft PCc 5500/840 51561 51562 51558
51565 MIDDLE EAST Ta 55 1.5ft PCc 8000/840 51566 51567 51568

Example of type marking: 51567 = MIDDLE EAST Ta 55 1.5ft PCc 8000/840 3F

LEGEND
1F – 1 phase wiring cables for through-wiring
3F – 3 phase wiring cables for through-wiring
DALI – version with digital dimmable driver DALI

CZECH LIGHT FITTINGS 149

 MIDDLE EAST Ta 55 PC, PCc

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) Attachment with the use of side hangers to the wall

LIGHT FITTING DETAILED VIEW

MIDDLE EAST Ta 55

150
PRIMA LED

INDUSTRIAL
PLASTIC
DUSTPROOF
WATERPROOF
IMPACT-RESISTANT
 PRODUCT OVERVIEW

PRIMA LED – industrial plastic LED light fitting

PRIMA LED
PRIMA LED
ACCESSORIES
page 154
page 180

IP66 PRIMA LED PRIMA LED

PC, PCc ACCESSORIES
page 154 page 180

PRIMA LED FOR

OUTDOOR SPACES
page 157

IP66 PRIMA LED

VP, VPc
page 157

PRIMA LED - CHEMICALLY

RESISTANT VERSION
page 160

IP66 PRIMA LED

ABS, ABSc
page 160

PRIMA LED
CLASS II INSULATION
page 163

IP66 PRIMA LED

CLASS II
page 163

PRIMA LED TRS

page 166

IP66 PRIMA LED TRS

page 166

PRIMA LED FOR EXTREME

TEMPERATURES
page 169

IP66 PRIMA LED

MAX PCc
page 169

PRIMA LED WITH

MOTION DETECTOR
page 171

IP66 PRIMA LED

SNS PC, SNS PCc
page 1

PRIMA LED FOR ENVIRON-

MENT WITH A DANGER OF
EXPLOSION
page 174
IP66 PRIMA LED Ex PCc
page 174

PRIMA LED TUBE

page 177

IP66 PRIMA LED TUBE

page 177

www.bim.lighting/en

CZECH LIGHT FITTINGS 153

 PRIMA LED

... dustproof, waterproof and impact-resistant.

USE ADVANTAGES
The light fitting is suitable for industrial indoor • Light fitting protection IP66 •S  tandard model - CRI > 80: 4000 K
and outdoor roofed spaces, warehouses, sports • Maximum ambient temperature up to ta = 45 °C •A  t request CRI > 80: 3000 K, 5000 K, 6500 K,
areas, workshops, garages, transport terminals, • Lifetime: 50,000 hours / L90B10 CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
utility structures and laboratories without a dan- • Diffuser: translucent polycarbonate (PC) = high • It can be delivered in dimmable or emergency
ger of explosion of gas, dust and combustible mechanical resistance version
fumes. • Body: grey polycarbonate (PC) = high mechani- •C  ertification: ESČ, ENEC, CB, HACCP
cal resistance
The light fitting is resistant to dust, moisture and • Up to 45 % lower electricity consumption when
spouting water. The body and the diffuser made compared to tubes T5
of polycarbonate (PC) have the increased resist- • In DALI version possibility of constant luminous
ance against deformation and impact. flux for whole lifetime (CLO)
• Constant luminous flux even in ambient tem-
(It is necessary to consider exhalation in the air perature of -25 °C
which can reduce the usability of the plastic at
installations in an aggressive environment, see
also page 325).

up to up to
LED
45ºC -25ºC

CRI
220-240 V DALI L 90
>80 B 10

05 HACCP

154
 PRIMA LED PC, PCc

PRIMA LED P C, PCc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 •R  eflector: steel sheet, white colour (RAL 9003)
• Maximum ambient temperature: ta = 45  °C, • Clips: polyamide + 15 % glass fibre or stainless
Maximum ambient temperature: ta = 0-25 °C steel + polyamide
(version with emergency back-up source for • Sealing: polyurethane (PUR), foamed body
1 or 3 hours; M1h, M3h) groove
• Maximum system efficacy: 153 lm/W • Cable glands: screwed PG 13.5, or rubber (SBS)
• The watt and lumen values can vary by ± 7,5 % •D  istance part: polyamide + 10 % glass fibre
• Standard model - CRI > 80: 4000 K • Terminal block: screwless, five-pole (basic ver-
• MacAdam = 3 SDCM sion), or screwed
• Lifetime: 50,000 hours / L90B10 • Installation: package contains stainless hooks
• Diffuser: translucent polycarbonate (PC), UV and stainless brackets
stable, impact-resistant • Electric equipment: LED modules, current driv-
• Body: grey polycarbonate (PC), UV stable, im- er or current driver DALI
pact-resistant

PRIMA LED 1.4ft PC

150° 180° 150°

A
120° 120°
D 95
90° 90°

111
100
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Code Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 45 °C - body: grey polycarbonate - diffuser: translucent polycarbonate
65010 PRIMA LED 1.2ft PC 1300/840 45 1320 1170 8 146 1,3 662 350
65020 PRIMA LED 1.2ft PC 1600/840 45 1580 1410 10 141 1,3 662 350
65030 PRIMA LED 1.2ft PC 2200/840 40 2200 1960 14 140 1,3 662 350
65040 PRIMA LED 1.4ft PC 2600/840 45 2580 2300 16 144 1,9 1272 700
65050 PRIMA LED 1.4ft PC 3200/840 45 3110 2770 20 139 1,9 1272 700
65060 PRIMA LED 1.4ft PC 4400/840 40 4350 3870 27 143 1,9 1272 700
65460 PRIMA LED 1.4ft PC 6400/840 40 6260 5570 38 147 1,9 1272 700
65070 PRIMA LED 1.5ft PC 3250/840 45 3240 2880 20 144 2,3 1572 940
65080 PRIMA LED 1.5ft PC 4000/840 45 3880 3450 24 144 2,3 1572 940
65090 PRIMA LED 1.5ft PC 5500/840 40 5420 4820 33 146 2,3 1572 940
65490 PRIMA LED 1.5ft PC 8000/840 40 7740 6890 45 153 2,3 1572 940

65020 PRIMA LED 1.2ft PC 1600/840 = suitable replacement for T8 fl. tube light fitting PRIMA 118 – 1 × 18 W
65050 PRIMA LED 1.4ft PC 3200/840 = suitable replacement for T8 fl. tube light fitting PRIMA 136 – 1 × 36 W
65460 PRIMA LED 1.4ft PC 6400/840 = suitable replacement for T8 fl. tube light fitting PRIMA 236 – 2 × 36 W
65080 PRIMA LED 1.5ft PC 4000/840 = suitable replacement for T8 fl. tube light fitting PRIMA 158 – 1 × 58 W
65490 PRIMA LED 1.5ft PC 8000/840 = suitable replacement for T8 fl. tube light fitting PRIMA 258 – 2 × 58 W

PRIMA LED PC Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

65010 PRIMA LED 1.2ft PC 1300/840 x x x x x x
65020 PRIMA LED 1.2ft PC 1600/840 x x x x x x
65030 PRIMA LED 1.2ft PC 2200/840 x x x x x x
65040 PRIMA LED 1.4ft PC 2600/840 65140 65340 65044 65045 65344 65345
65050 PRIMA LED 1.4ft PC 3200/840 65150 65350 65054 65055 65354 65355
65060 PRIMA LED 1.4ft PC 4400/840 65160 65360 65064 65065 65364 65365
65460 PRIMA LED 1.4ft PC 6400/840 65461 65462 x x x x
65070 PRIMA LED 1.5ft PC 3250/840 65170 65370 65074 65075 65374 65375
65080 PRIMA LED 1.5ft PC 4000/840 65180 65380 65084 65085 65384 65385
65090 PRIMA LED 1.5ft PC 5500/840 65190 65390 65094 65095 65394 65395
65490 PRIMA LED 1.5ft PC 8000/840 65491 65492 x x x x

PRIMA LED PCc Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

65210 PRIMA LED 1.2ft PCc 1300/840 x x x x x x
65220 PRIMA LED 1.2ft PCc 1600/840 x x x x x x
65230 PRIMA LED 1.2ft PCc 2200/840 x x x x x x
65240 PRIMA LED 1.4ft PCc 2600/840 65540 65640 65244 65245 65644 65645
65250 PRIMA LED 1.4ft PCc 3200/840 65550 65650 65254 65255 65654 65655
65260 PRIMA LED 1.4ft PCc 4400/840 65560 65660 65264 65265 65664 65665
65760 PRIMA LED 1.4ft PCc 6400/840 65761 65762 x x x x
65270 PRIMA LED 1.5ft PCc 3250/840 65570 65670 65274 65275 65674 65675
65280 PRIMA LED 1.5ft PCc 4000/840 65580 65680 65284 65285 65684 65685
65290 PRIMA LED 1.5ft PCc 5500/840 65590 65690 65294 65295 65694 65695
65790 PRIMA LED 1.5ft PCc 8000/840 65791 65792 x x x x

Example of type marking: 65644 = PRIMA LED 1.4ft PCc 2600/840 3F M1h

CZECH LIGHT FITTINGS 155

 PRIMA LED PC, PCc

PRIMA LED PC DALI Digital dimmable driver DALI - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

65013 PRIMA LED 1.2ft PC 1300/840 DALI x x x x x x
65023 PRIMA LED 1.2ft PC 1600/840 DALI x x x x x x
65033 PRIMA LED 1.2ft PC 2200/840 DALI x x x x x x
65043 PRIMA LED 1.4ft PC 2600/840 DALI 65143 65343 65047 65048 65347 65348
65053 PRIMA LED 1.4ft PC 3200/840 DALI 65153 65353 65057 65058 65357 65358
65063 PRIMA LED 1.4ft PC 4400/840 DALI 65163 65363 65067 65068 65367 65368
65860 PRIMA LED 1.4ft PC 6400/840 DALI 65861 65862 x x x x
65073 PRIMA LED 1.5ft PC 3250/840 DALI 65173 65373 65077 65078 65377 65378
65083 PRIMA LED 1.5ft PC 4000/840 DALI 65183 65383 65087 65088 65387 65388
65093 PRIMA LED 1.5ft PC 5500/840 DALI 65193 65393 65097 65098 65397 65398
65890 PRIMA LED 1.5ft PC 8000/840 DALI 65891 65892 x x x x

PRIMA LED PCc DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

65213 PRIMA LED 1.2ft PCc 1300/840 DALI x x x x x x
65223 PRIMA LED 1.2ft PCc 1600/840 DALI x x x x x x
65233 PRIMA LED 1.2ft PCc 2200/840 DALI x x x x x x
65243 PRIMA LED 1.4ft PCc 2600/840 DALI 65543 65643 65247 65248 65647 65648
65253 PRIMA LED 1.4ft PCc 3200/840 DALI 65553 65653 65257 65258 65657 65658
65263 PRIMA LED 1.4ft PCc 4400/840 DALI 65563 65663 65267 65268 65667 65668
65960 PRIMA LED 1.4ft PCc 6400/840 DALI 65961 65962 x x x x
65273 PRIMA LED 1.5ft PCc 3250/840 DALI 65573 65673 65277 65278 65677 65678
65283 PRIMA LED 1.5ft PCc 4000/840 DALI 65583 65683 65287 65288 65687 65688
65293 PRIMA LED 1.5ft PCc 5500/840 DALI 65593 65693 65297 65298 65697 65698
65990 PRIMA LED 1.5ft PCc 8000/840 DALI 65991 65992 x x x x

Example of type marking: 65693 = PRIMA LED 1.5ft PCc 5500/840 DALI 3F

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) Attachment with the use of side hangers to the wall

LIGHT FITTING DETAILED VIEW

PRIMA LED

156
PRIMA LED VP

... for outdoor spaces.

USE ADVANTAGES
The light fitting is suitable for the installation • Light fitting protection IP66 •S  tandard model - CRI > 80: 4000 K
in outdoor spaces with shelter. It is equipped • Maximum ambient temperature up to ta = 45 °C •A  t request CRI > 80: 3000 K, 5000 K, 6500 K,
with a ventilation plug made of polyamide which • Lifetime: 50,000 hours / L90B10 CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
eliminates the presence of condensation fumes • Diffuser: translucent polycarbonate (PC) = high • It can be delivered in dimmable or emergency
and underpressure in the light fitting caused by mechanical resistance version
ambient temperature fluctuations. • Body: grey polycarbonate (PC) = high mechani- •C  ertification: ESČ, ENEC, CB, HACCP
cal resistance
The light fitting is resistant to dust, moisture and • Up to 45 % lower electricity consumption when
spouting water. The body and the diffuser made compared to tubes T5
of polycarbonate (PC) have the increased resist- • In DALI version possibility of constant luminous
ance against deformation and impact. flux for whole lifetime (CLO)
• Constant luminous flux even in ambient tem-
(It is necessary to consider exhalation in the air perature of -25 °C
which can reduce the usability of the plastic at
installations in an aggressive environment, see
also page 325).

up to up to
LED
45ºC -25ºC

CRI
220-240 V DALI L 90
>80 B 10

05 HACCP

CZECH LIGHT FITTINGS 157

 PRIMA LED VP, VPc

PRIMA LED V P, VPc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 •R  eflector: steel sheet, white colour (RAL 9003)
• Maximum ambient temperature: ta = 45  °C, • Ventilation plug: type BVPB-01 made of polyam-
Maximum ambient temperature: ta = 0-25 °C ide, size M12 × 1.5
(version with emergency back-up source for • Clips: polyamide + 15 % glass fibre or stainless
1 or 3 hours; M1h, M3h) steel + polyamide
• Maximum system efficacy: 153 lm/W • Sealing: polyurethane (PUR), foamed body
• The watt and lumen values can vary by ± 7,5 % groove
• Standard model - CRI > 80: 4000 K • Cable glands: screwed PG 13.5, or rubber (SBS)
• MacAdam = 3 SDCM •D  istance part: polyamide + 10 % glass fibre
• Lifetime: 50,000 hours / L90B10 • Terminal block: screwless, five-pole (basic ver-
• Diffuser: translucent polycarbonate (PC), UV sion), or screwed
stable, impact-resistant • Installation: package contains stainless hooks
• Body: grey polycarbonate (PC), UV stable, im- and stainless brackets
pact-resistant • Electric equipment: LED modules, current driv-
er or current driver DALI

PRIMA LED 1.4ft VP

150° 180° 150°
A
120° 120°
D 95
90° 90°

111
100
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Code Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 45 °C - body: grey polycarbonate - diffuser: translucent polycarbonate
66010 PRIMA LED 1.2ft VP 1300/840 45 1320 1170 8 146 1,3 662 350
66020 PRIMA LED 1.2ft VP 1600/840 45 1580 1410 10 141 1,3 662 350
66030 PRIMA LED 1.2ft VP 2200/840 40 2200 1960 14 140 1,3 662 350
66040 PRIMA LED 1.4ft VP 2600/840 45 2580 2300 16 144 1,9 1272 700
66050 PRIMA LED 1.4ft VP 3200/840 45 3110 2770 20 139 1,9 1272 700
66060 PRIMA LED 1.4ft VP 4400/840 40 4350 3870 27 143 1,9 1272 700
66460 PRIMA LED 1.4ft VP 6400/840 40 6260 5570 38 147 1,9 1272 700
66070 PRIMA LED 1.5ft VP 3250/840 45 3240 2880 20 144 2,3 1572 940
66080 PRIMA LED 1.5ft VP 4000/840 45 3880 3450 24 144 2,3 1572 940
66090 PRIMA LED 1.5ft VP 5500/840 40 5420 4820 33 146 2,3 1572 940
66490 PRIMA LED 1.5ft VP 8000/840 40 7740 6890 45 153 2,3 1572 940

66020 PRIMA LED 1.2ft VP 1600/840 = suitable replacement for T8 fl. tube light fitting PRIMA 118 – 1 × 18 W
66050 PRIMA LED 1.4ft VP 3200/840 = suitable replacement for T8 fl. tube light fitting PRIMA 136 – 1 × 36 W
66460 PRIMA LED 1.4ft VP 6400/840 = suitable replacement for T8 fl. tube light fitting PRIMA 236 – 2 × 36 W
66080 PRIMA LED 1.5ft VP 4000/840 = suitable replacement for T8 fl. tube light fitting PRIMA 158 – 1 × 58 W
66490 PRIMA LED 1.5ft VP 8000/840 = suitable replacement for T8 fl. tube light fitting PRIMA 258 – 2 × 58 W

PRIMA LED VP Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

66010 PRIMA LED 1.2ft VP 1300/840 x x x x x x
66020 PRIMA LED 1.2ft VP 1600/840 x x x x x x
66030 PRIMA LED 1.2ft VP 2200/840 x x x x x x
66040 PRIMA LED 1.4ft VP 2600/840 66140 66340 66044 66045 66344 66345
66050 PRIMA LED 1.4ft VP 3200/840 66150 66350 66054 66055 66354 66355
66060 PRIMA LED 1.4ft VP 4400/840 66160 66360 66064 66065 66364 66365
66460 PRIMA LED 1.4ft VP 6400/840 66461 66462 x x x x
66070 PRIMA LED 1.5ft VP 3250/840 66170 66370 66074 66075 66374 66375
66080 PRIMA LED 1.5ft VP 4000/840 66180 66380 66084 66085 66384 66385
66090 PRIMA LED 1.5ft VP 5500/840 66190 66390 66094 66095 66394 66395
66490 PRIMA LED 1.5ft VP 8000/840 66491 66492 x x x x

PRIMA LED VPc Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

66210 PRIMA LED 1.2ft VPc 1300/840 x x x x x x
66220 PRIMA LED 1.2ft VPc 1600/840 x x x x x x
66230 PRIMA LED 1.2ft VPc 2200/840 x x x x x x
66240 PRIMA LED 1.4ft VPc 2600/840 66540 66640 66244 66245 66644 66645
66250 PRIMA LED 1.4ft VPc 3200/840 66550 66650 66254 66255 66654 66655
66260 PRIMA LED 1.4ft VPc 4400/840 66560 66660 66264 66265 66664 66665
66760 PRIMA LED 1.4ft VPc 6400/840 66761 66762 x x x x
66270 PRIMA LED 1.5ft VPc 3250/840 66570 66670 66274 66275 66674 66675
66280 PRIMA LED 1.5ft VPc 4000/840 66580 66680 66284 66285 66684 66685
66290 PRIMA LED 1.5ft VPc 5500/840 66590 66690 66294 66295 66694 66695
66790 PRIMA LED 1.5ft VPc 8000/840 66791 66792 x x x x

Example of type marking: 66644 = PRIMA LED 1.4ft VP 2600/840 3F M1h

158
 PRIMA LED VP, VPc

PRIMA LED VP DALI Digital dimmable driver DALI - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

66013 PRIMA LED 1.2ft VP 1300/840 DALI x x x x x x
66023 PRIMA LED 1.2ft VP 1600/840 DALI x x x x x x
66033 PRIMA LED 1.2ft VP 2200/840 DALI x x x x x x
66043 PRIMA LED 1.4ft VP 2600/840 DALI 66143 66343 66047 66048 66347 66348
66053 PRIMA LED 1.4ft VP 3200/840 DALI 66153 66353 66057 66058 66357 66358
66063 PRIMA LED 1.4ft VP 4400/840 DALI 66163 66363 66067 66068 66367 66368
66860 PRIMA LED 1.4ft VP 6400/840 DALI 66861 66862 x x x x
66073 PRIMA LED 1.5ft VP 3250/840 DALI 66173 66373 66077 66078 66377 66378
66083 PRIMA LED 1.5ft VP 4000/840 DALI 66183 66383 66087 66088 66387 66388
66093 PRIMA LED 1.5ft VP 5500/840 DALI 66193 66393 66097 66098 66397 66398
66890 PRIMA LED 1.5ft VP 8000/840 DALI 66891 66892 x x x x

PRIMA LED VPc DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

66213 PRIMA LED 1.2ft VPc 1300/840 DALI x x x x x x
66223 PRIMA LED 1.2ft VPc 1600/840 DALI x x x x x x
66233 PRIMA LED 1.2ft VPc 2200/840 DALI x x x x x x
66243 PRIMA LED 1.4ft VPc 2600/840 DALI 66543 66643 66247 66248 66647 66648
66253 PRIMA LED 1.4ft VPc 3200/840 DALI 66553 66653 66257 66258 66657 66658
66263 PRIMA LED 1.4ft VPc 4400/840 DALI 66563 66663 66267 66268 66667 66668
66960 PRIMA LED 1.4ft VPc 6400/840 DALI 66961 66962 x x x x
66273 PRIMA LED 1.5ft VPc 3250/840 DALI 66573 66673 66277 66278 66677 66678
66283 PRIMA LED 1.5ft VPc 4000/840 DALI 66583 66683 66287 66288 66687 66688
66293 PRIMA LED 1.5ft VPc 5500/840 DALI 66593 66693 66297 66298 66697 66698
66990 PRIMA LED 1.5ft VPc 8000/840 DALI 66991 66992 x x x x

Example of type marking: 66693 = PRIMA LED 1.5ft VPc 5500/840 DALI 3F

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) Attachment with the use of side hangers to the wall

LIGHT FITTING DETAILED VIEW

PRIMA LED VP

CZECH LIGHT FITTINGS 159

 PRIMA LED ABS

… dustproof, waterproof and chemically resistant.

USE ADVANTAGES
The light fitting is suitable for the environment • Light fitting protection IP66 •A  t request CRI > 80: 3000 K, 5000 K, 6500 K,
where ammoniac fumes, lixiviants, alkaline • Maximum ambient temperature up to ta = 45 °C CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
compounds and hot water (hydrolyses) can be • Lifetime: 50,000 hours / L90B10 • It can be delivered in dimmable or emergency
present. We recommend this light fitting for ag- • Diffuser: translucent acrylate (AC) = high version
ricultural operations, stables, car washing lines, chemical resistance •C  ertification: ESČ, ENEC, CB, HACCP
warehouses, mechanical workshops and labora- • Body: dark grey (ABS) = high chemical resist-
tories without a danger of explosion of gas, dust ance
and combustible fumes. • Up to 45 % lower electricity consumption when
compared to tubes T5
The light fitting is resistant to dust, moisture and • In DALI version possibility of constant luminous
spouting water. The body made of ABS and the flux for whole lifetime (CLO)
diffuser made of AC have increased chemical • Constant luminous flux even in ambient tem-
resistance. perature of -25 °C
• Standard model - CRI > 80: 4000 K
(It is necessary to consider exhalation in the air
which can reduce the usability of the plastic at
installations in an aggressive environment, see
also page 325). up to up to
LED
45ºC -25ºC
Always open the cover of the light fitting out of an
CRI
environment with aggressive volatile substances. 220-240 V DALI L 90
>80 B 10

05 HACCP

160
 PRIMA LED ABS, ABSc

PRIMA LED A BS, ABSc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 •R  eflector: steel sheet, white colour (RAL 9003)
• Maximum ambient temperature: ta = 45  °C, • Clips: polyamide + 15 % glass fibre or stainless
Maximum ambient temperature: ta = 0-25 °C steel + polyamide
(version with emergency back-up source for • Sealing: polyurethane (PUR), foamed body
1 or 3 hours; M1h, M3h) groove
• Maximum system efficacy: 150 lm/W • Cable glands: screwed PG 13.5, or rubber (SBS)
• The watt and lumen values can vary by ± 7,5 % •D  istance part: polyamide + 10 % glass fibre
• Standard model - CRI > 80: 4000 K • Terminal block: screwless, five-pole (basic ver-
• MacAdam = 3 SDCM sion), or screwed
• Lifetime: 50,000 hours / L90B10 • Installation: package contains stainless hooks
• Diffuser: translucent acrylate (AC), UV stable, and stainless brackets
chemically resistant • Electric equipment: LED modules, current driv-
• Body: dark grey (ABS), UV stable, chemically er or current driver DALI
resistant

PRIMA LED 1.4ft ABS

150° 180° 150°
A
120° 120°
D 95
90° 90°

111
100
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Code Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 45 °C - body: dark grey ABS - diffuser: translucent acrylate
67010 PRIMA LED 1.2ft ABS 1300/840 45 1320 1150 8 144 1,3 662 350
67020 PRIMA LED 1.2ft ABS 1600/840 45 1580 1370 10 137 1,3 662 350
67030 PRIMA LED 1.2ft ABS 2200/840 40 2200 1910 14 136 1,3 662 350
67040 PRIMA LED 1.4ft ABS 2600/840 45 2580 2240 16 140 1,9 1272 700
67050 PRIMA LED 1.4ft ABS 3200/840 45 3110 2710 20 136 1,9 1272 700
67060 PRIMA LED 1.4ft ABS 4400/840 40 4350 3780 27 140 1,9 1272 700
67460 PRIMA LED 1.4ft ABS 6400/840 40 6260 5450 38 143 1,9 1272 700
67070 PRIMA LED 1.5ft ABS 3250/840 45 3240 2820 20 141 2,3 1572 940
67080 PRIMA LED 1.5ft ABS 4000/840 45 3880 3380 24 141 2,3 1572 940
67090 PRIMA LED 1.5ft ABS 5500/840 40 5420 4720 33 143 2,3 1572 940
67490 PRIMA LED 1.5ft ABS 8000/840 40 7740 6730 45 150 2,3 1572 940

67020 PRIMA LED 1.2ft ABS 1600/840 = suitable replacement for T8 fl. tube light fitting PRIMA 118 – 1 × 18 W
67050 PRIMA LED 1.4ft ABS 3200/840 = suitable replacement for T8 fl. tube light fitting PRIMA 136 – 1 × 36 W
67490 PRIMA LED 1.5ft ABS 8000/840 = suitable replacement for T8 fl. tube light fitting PRIMA 258 – 2 × 58 W

PRIMA LED ABS Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

67010 PRIMA LED 1.2ft ABS 1300/840 x x x x x x
67020 PRIMA LED 1.2ft ABS 1600/840 x x x x x x
67030 PRIMA LED 1.2ft ABS 2200/840 x x x x x x
67040 PRIMA LED 1.4ft ABS 2600/840 67140 67340 67044 67045 67344 67345
67050 PRIMA LED 1.4ft ABS 3200/840 67150 67350 67054 67055 67354 67355
67060 PRIMA LED 1.4ft ABS 4400/840 67160 67360 67064 67065 67364 67365
67460 PRIMA LED 1.4ft ABS 6400/840 67461 67462 x x x x
67070 PRIMA LED 1.5ft ABS 3250/840 67170 67370 67074 67075 67374 67375
67080 PRIMA LED 1.5ft ABS 4000/840 67180 67380 67084 67085 67384 67385
67090 PRIMA LED 1.5ft ABS 5500/840 67190 67390 67094 67095 67394 67395
67490 PRIMA LED 1.5ft ABS 8000/840 67491 67492 x x x x

PRIMA LED ABSc Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

67210 PRIMA LED 1.2ft ABSc 1300/840 x x x x x x
67220 PRIMA LED 1.2ft ABSc 1600/840 x x x x x x
67230 PRIMA LED 1.2ft ABSc 2200/840 x x x x x x
67240 PRIMA LED 1.4ft ABSc 2600/840 67540 67640 67244 67245 67644 67645
67250 PRIMA LED 1.4ft ABSc 3200/840 67550 67650 67254 67255 67654 67655
67260 PRIMA LED 1.4ft ABSc 4400/840 67560 67660 67264 67265 67664 67665
67760 PRIMA LED 1.4ft ABSc 6400/840 67761 67762 x x x x
67270 PRIMA LED 1.5ft ABSc 3250/840 67570 67670 67274 67275 67674 67675
67280 PRIMA LED 1.5ft ABSc 4000/840 67580 67680 67284 67285 67684 67685
67290 PRIMA LED 1.5ft ABSc 5500/840 67590 67690 67294 67295 67694 67695
67790 PRIMA LED 1.5ft ABSc 8000/840 67791 67792 x x x x

Example of type marking: 67644 = PRIMA LED 1.4ft ABS 2600/840 3F M1h

CZECH LIGHT FITTINGS 161

 PRIMA LED ABS, ABSc

PRIMA LED ABS DALI Digital dimmable driver DALI - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

67013 PRIMA LED 1.2ft ABS 1300/840 DALI x x x x x x
67023 PRIMA LED 1.2ft ABS 1600/840 DALI x x x x x x
67033 PRIMA LED 1.2ft ABS 2200/840 DALI x x x x x x
67043 PRIMA LED 1.4ft ABS 2600/840 DALI 67143 67343 67047 67048 67347 67348
67053 PRIMA LED 1.4ft ABS 3200/840 DALI 67153 67353 67057 67058 67357 67358
67063 PRIMA LED 1.4ft ABS 4400/840 DALI 67163 67363 67067 67068 67367 67368
67860 PRIMA LED 1.4ft ABS 6400/840 DALI 67861 67862 x x x x
67073 PRIMA LED 1.5ft ABS 3250/840 DALI 67173 67373 67077 67078 67377 67378
67083 PRIMA LED 1.5ft ABS 4000/840 DALI 67183 67383 67087 67088 67387 67388
67093 PRIMA LED 1.5ft ABS 5500/840 DALI 67193 67393 67097 67098 67397 67398
67890 PRIMA LED 1.5ft ABS 8000/840 DALI 67891 67892 x x x x

PRIMA LED ABSc DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

67213 PRIMA LED 1.2ft ABSc 1300/840 DALI x x x x x x
67223 PRIMA LED 1.2ft ABSc 1600/840 DALI x x x x x x
67233 PRIMA LED 1.2ft ABSc 2200/840 DALI x x x x x x
67243 PRIMA LED 1.4ft ABSc 2600/840 DALI 67543 67643 67247 67248 67647 67648
67253 PRIMA LED 1.4ft ABSc 3200/840 DALI 67553 67653 67257 67258 67657 67658
67263 PRIMA LED 1.4ft ABSc 4400/840 DALI 67563 67663 67267 67268 67667 67668
67960 PRIMA LED 1.4ft ABSc 6400/840 DALI 67961 67962 x x x x
67273 PRIMA LED 1.5ft ABSc 3250/840 DALI 67573 67673 67277 67278 67677 67678
67283 PRIMA LED 1.5ft ABSc 4000/840 DALI 67583 67683 67287 67288 67687 67688
67293 PRIMA LED 1.5ft ABSc 5500/840 DALI 67593 67693 67297 67298 67697 67698
67990 PRIMA LED 1.5ft ABSc 8000/840 DALI 67991 67992 x x x x

Example of type marking: 67693 = PRIMA LED 1.5ft ABSc 5500/840 DALI 3F

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) Attachment with the use of side hangers to the wall

LIGHT FITTING DETAILED VIEW

PRIMA LED ABS

162
PRIMA LED CLASS II

…w
 ith Class II insulation.

USE ADVANTAGES
Light fitting is suitable for industrial, warehouse •L  ight fitting protection IP66 •S  tandard model - CRI > 80: 4000 K
and agricultural buildings, sports premises, • Maximum ambient temperature up to ta = 45 °C • At request CRI > 80: 3000 K, 5000 K, 6500 K,
transport terminals, railway vehicle repair • Lifetime: 50,000 hours / L90B10 CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
shops, platforms, traction substations, depots, • Diffuser: translucent polycarbonate (PC) = high • It can be delivered in dimmable or emergency
parking lots and garages, workshops and labo- mechanical resistance version
ratories without explosion hazard. • Body: grey polycarbonate (PC) = high mechani- •A  vailable in ABS chemical resistant version
cal resistance • Through-wiring of up to 6 wires at body (1.4ft
The light fitting resists dust, humidity and spout- • Up to 45 % lower electricity consumption when and 1.5ft)
ing water. The body and the diffuser made of compared to tubes T5
PC material have high mechanical resistance • In DALI version possibility of constant luminous
against impact and deformation. flux for whole lifetime (CLO)
• Constant luminous flux even in ambient tem-
Emissions in the environment of use may reduce perature of -25 °C
the usability of the plastics.

up to up to
LED
45ºC -25ºC

CRI
220-240 V DALI L 90
>80 B 10

HACCP

CZECH LIGHT FITTINGS 163

 PRIMA LED CLASS II PC, PCc

PRIMA LED CLASS II P C, PCc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 • Body: grey polycarbonate (PC), UV stable, im-
• Maximum ambient temperature: ta = 45 °C, pact-resistant
Maximum ambient temperature: ta = 0-25 °C •R  eflector: steel sheet, white colour (RAL 9003)
(version with emergency back-up source for • Clips: polyamide + 15 % glass fibre or stainless
1 or 3 hours; M1h, M3h) steel + polyamide
• Maximum system efficacy: 153 lm/W • Sealing: polyurethane (PUR), foamed body groove
• AWEX emergency light module generates a lu- • Cable glands: screwed PG 13.5, or rubber (SBS)
minous flux of 440 lm •D  istance part: polyamide + 10 % glass fibre
• The watt and lumen values can vary by ± 7,5 % • Terminal block: Connectors with 2, 4 or 6
• Standard model - CRI > 80: 4000 K poles, wire section 1.5 or 2.5 mm
• MacAdam = 3 SDCM • Installation: package contains stainless hooks,
• Lifetime: 50,000 hours / L90B10 stainless brackets and a connector’s counterpart
• Diffuser: translucent polycarbonate (PC), UV • Electric equipment: LED modules, current driv-
stable, impact-resistant er or current driver DALI

PRIMA LED 1.4ft CLASS II PC

150° 180° 150°

A
120° 120°
D 95
90° 90°

111
100
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Code Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 45 °C - body: grey polycarbonate - diffuser: translucent polycarbonate
71200 PRIMA LED 1.2ft CLASS II PC 1300/840 45 1320 1170 8 146 1,3 662 350
71210 PRIMA LED 1.2ft CLASS II PC 1600/840 45 1580 1410 10 141 1,3 662 350
71220 PRIMA LED 1.2ft CLASS II PC 2200/840 40 2200 1960 14 140 1,3 662 350
71230 PRIMA LED 1.4ft CLASS II PC 2600/840 45 2580 2300 16 144 1,9 1272 700
71240 PRIMA LED 1.4ft CLASS II PC 3200/840 45 3110 2770 20 139 1,9 1272 700
71250 PRIMA LED 1.4ft CLASS II PC 4400/840 40 4350 3870 27 143 1,9 1272 700
71260 PRIMA LED 1.4ft CLASS II PC 6400/840 40 6260 5570 38 147 1,9 1272 700
71270 PRIMA LED 1.5ft CLASS II PC 3250/840 45 3240 2880 20 144 2,3 1572 940
71280 PRIMA LED 1.5ft CLASS II PC 4000/840 45 3880 3450 24 144 2,3 1572 940
71290 PRIMA LED 1.5ft CLASS II PC 5500/840 40 5420 4820 33 146 2,3 1572 940
71300 PRIMA LED 1.5ft CLASS II PC 8000/840 40 7740 6890 45 153 2,3 1572 940

71210 PRIMA LED 1.2ft CLASS II PC 1600/840 = suitable replacement for T8 fl. tube light fitting PRIMA 118 – 1 × 18 W
71240 PRIMA LED 1.4ft CLASS II PC 3200/840 = suitable replacement for T8 fl. tube light fitting PRIMA 136 – 1 × 36 W
71260 PRIMA LED 1.4ft CLASS II PC 6400/840 = suitable replacement for T8 fl. tube light fitting PRIMA 236 – 2 × 36 W
71280 PRIMA LED 1.5ft CLASS II PC 4000/840 = suitable replacement for T8 fl. tube light fitting PRIMA 158 – 1 × 58 W
71300 PRIMA LED 1.5ft CLASS II PC 8000/840 = suitable replacement for T8 fl. tube light fitting PRIMA 258 – 2 × 58 W

PRIMA LED CLASS II PC Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

71200 PRIMA LED 1.2ft CLASS II PC 1300/840 x x x x x x
71210 PRIMA LED 1.2ft CLASS II PC 1600/840 x x x x x x
71220 PRIMA LED 1.2ft CLASS II PC 2200/840 x x x x x x
71230 PRIMA LED 1.4ft CLASS II PC 2600/840 71231 71233 71234 71235 71236 71237
71240 PRIMA LED 1.4ft CLASS II PC 3200/840 71241 71243 71244 71245 71246 71247
71250 PRIMA LED 1.4ft CLASS II PC 4400/840 71251 71253 71254 71255 71256 71257
71260 PRIMA LED 1.4ft CLASS II PC 6400/840 71261 71263 x x x x
71270 PRIMA LED 1.5ft CLASS II PC 3250/840 71271 71273 71274 71275 71276 71277
71280 PRIMA LED 1.5ft CLASS II PC 4000/840 71281 71283 71284 71285 71286 71287
71290 PRIMA LED 1.5ft CLASS II PC 5500/840 71291 71293 71294 71295 71296 71297
71300 PRIMA LED 1.5ft CLASS II PC 8000/840 71301 71303 x x x x

PRIMA LED CLASS II PCc Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

71310 PRIMA LED 1.2ft CLASS II PCc 1300/840 x x x x x x
71320 PRIMA LED 1.2ft CLASS II PCc 1600/840 x x x x x x
71330 PRIMA LED 1.2ft CLASS II PCc 2200/840 x x x x x x
71340 PRIMA LED 1.4ft CLASS II PCc 2600/840 71341 71343 71344 71345 71346 71347
71350 PRIMA LED 1.4ft CLASS II PCc 3200/840 71351 71353 71354 71355 71356 71357
71360 PRIMA LED 1.4ft CLASS II PCc 4400/840 71361 71363 71364 71365 71366 71367
71370 PRIMA LED 1.4ft CLASS II PCc 6400/840 71371 71373 x x x x
71380 PRIMA LED 1.5ft CLASS II PCc 3250/840 71381 71383 71384 71385 71386 71387
71390 PRIMA LED 1.5ft CLASS II PCc 4000/840 71391 71393 71394 71395 71396 71397
71400 PRIMA LED 1.5ft CLASS II PCc 5500/840 71401 71403 71404 71405 71406 71407
71410 PRIMA LED 1.5ft CLASS II PCc 8000/840 71411 71413 x x x x

Example of type marking: 71346 = PRIMA LED 1.4ft CLASS II PCc 2600/840 3F M1h

164
 PRIMA LED CLASS II PC, PCc

PRIMA LED CLASS II PC DALI Digital dimmable driver DALI - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

71420 PRIMA LED 1.2ft CLASS II PC 1300/840 DALI x x x x x x
71430 PRIMA LED 1.2ft CLASS II PC 1600/840 DALI x x x x x x
71440 PRIMA LED 1.2ft CLASS II PC 2200/840 DALI x x x x x x
71450 PRIMA LED 1.4ft CLASS II PC 2600/840 DALI 71451 71453 71454 71455 71456 71457
71460 PRIMA LED 1.4ft CLASS II PC 3200/840 DALI 71461 71463 71464 71465 71466 71467
71470 PRIMA LED 1.4ft CLASS II PC 4400/840 DALI 71471 71473 71474 71475 71476 71477
71480 PRIMA LED 1.4ft CLASS II PC 6400/840 DALI 71481 71483 x x x x
71490 PRIMA LED 1.5ft CLASS II PC 3250/840 DALI 71491 71493 71494 71495 71496 71497
71500 PRIMA LED 1.5ft CLASS II PC 4000/840 DALI 71501 71503 71504 71505 71506 71507
71510 PRIMA LED 1.5ft CLASS II PC 5500/840 DALI 71511 71513 71514 71515 71516 71517
71520 PRIMA LED 1.5ft CLASS II PC 8000/840 DALI 71521 71523 x x x x

PRIMA LED CLASS II PCc DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

71530 PRIMA LED 1.2ft CLASS II PCc 1300/840 DALI x x x x x x
71540 PRIMA LED 1.2ft CLASS II PCc 1600/840 DALI x x x x x x
71550 PRIMA LED 1.2ft CLASS II PCc 2200/840 DALI x x x x x x
71560 PRIMA LED 1.4ft CLASS II PCc 2600/840 DALI 71561 71563 71564 71565 71566 71567
71570 PRIMA LED 1.4ft CLASS II PCc 3200/840 DALI 71571 71573 71574 71575 71576 71577
71580 PRIMA LED 1.4ft CLASS II PCc 4400/840 DALI 71581 71583 71584 71585 71586 71587
71590 PRIMA LED 1.4ft CLASS II PCc 6400/840 DALI 71591 71593 x x x x
71600 PRIMA LED 1.5ft CLASS II PCc 3250/840 DALI 71601 71603 71604 71605 71606 71607
71610 PRIMA LED 1.5ft CLASS II PCc 4000/840 DALI 71611 71613 71614 71615 71616 71617
71620 PRIMA LED 1.5ft CLASS II PCc 5500/840 DALI 71621 71623 71624 71625 71626 71627
71630 PRIMA LED 1.5ft CLASS II PCc 8000/840 DALI 71631 71633 x x x x

Example of type marking: 71623 = PRIMA LED 1.5ft CLASS II PCc 5500/840 DALI 3F

LEGEND
CLASS II 1F 1-phase 2 core through-wiring in the luminaire
CLASS II 3F 3-phase 4 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination
CLASS II 3F Mxh 3-phase 4 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)

DALI version with digital dimmable driver DALI

CLASS II DALI 1F 1-phase 4 core through-wiring in the luminaire
CLASS II DALI 3F 3-phase 6 core through-wiring in the luminaire
CLASS II DALI 3F Mxh 3-phase 6 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) Attachment with the use of side hangers to the wall

LIGHT FITTING DETAILED VIEW

PRIMA LED CLASS II

STUCCHI 37xx WIELAND

CZECH LIGHT FITTINGS 165

 PRIMA LED TRS

... for direct and indirect illumination.

USE ADVANTAGES
This luminaire, which features a clear base, is a • Light fitting protection IP66 •S  tandard model - CRI > 80: 4000 K
perfect source of both direct and indirect illumina- • Maximum ambient temperature up to ta = 45 °C •A  t request CRI > 80: 3000 K, 5000 K, 6500 K,
tion for spaces with low ceilings. The light fitting is • Lifetime: 50,000 hours / L90B10 CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
suitable for industrial indoor and outdoor roofed • Diffuser: clear polycarbonate (PC) = high me- • It can be delivered in dimmable version
spaces, warehouses, sports areas, workshops, chanical resistance •It can be delivered in Tunable White version at
garages, transport terminals, utility structures • Body: clear polycarbonate (PC) = high mechani- request
and laboratories without a danger of explosion of cal resistance •C  ertification: ESČ, CB, HACCP
gas, dust and combustible fumes. • Up to 45 % lower electricity consumption when
compared to tubes T5
The light fitting is resistant to dust, moisture and • In DALI version possibility of constant luminous
spouting water. The body and the diffuser made of flux for whole lifetime (CLO)
polycarbonate (PC) have the increased resistance • Constant luminous flux even in ambient tem-
against deformation and impact. perature of -25 °C

(It is necessary to consider exhalation in the air

which can reduce the usability of the plastic at in-
stallations in an aggressive environment.
up to up to
LED
45ºC -25ºC

CRI
220-240 V DALI L 90
>80 B 10

HACCP

166
 PRIMA LED TRS PC, PCc

PRIMA LED TRS P C, PCc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 • Sealing: polyurethane (PUR), foamed body
• Maximum ambient temperature: ta = 45 °C, groove
• Maximum system efficacy: 153 lm/W • Cable glands: screwed PG 13.5, or rubber (SBS)
• The watt and lumen values can vary by ± 7,5 % •D  istance part: polyamide + 10 % glass fibre
• Standard model - CRI > 80: 4000 K • Terminal block: screwless, three-pole (basic
• MacAdam = 3 SDCM version), or screwed
• Lifetime: 50,000 hours / L90B10 • Installation: package contains stainless hooks
• Diffuser: clear polycarbonate (PC) = high me- and stainless brackets
chanical resistence • Electric equipment: LED modules, current driv-
• Body: clear polycarbonate (PC), UV stable, im- er or current driver DALI
pact-resistant
• Reflector: steel sheet, white colour (RAL 9003)
modified for indirect illumination
• Clips: polyamide + 15 % glass fibre or stainless
steel + polyamide

PRIMA LED 1.5ft TRS PC

150° 180° 150°

A
120° 120°
D 95
90° 90°

111
100
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Code Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 45 °C - body: clear polycarbonate - diffuser: clear polycarbonate
88000 PRIMA LED 1.2ft TRS PC 1300/840 45 1320 1170 8 146 1,3 662 350
88010 PRIMA LED 1.2ft TRS PC 1600/840 45 1580 1410 10 141 1,3 662 350
88020 PRIMA LED 1.2ft TRS PC 2200/840 40 2200 1960 14 140 1,3 662 350
88030 PRIMA LED 1.4ft TRS PC 2600/840 45 2580 2300 16 144 1,9 1272 700
88040 PRIMA LED 1.4ft TRS PC 3200/840 45 3110 2770 20 139 1,9 1272 700
88050 PRIMA LED 1.4ft TRS PC 4400/840 40 4350 3870 27 143 1,9 1272 700
88060 PRIMA LED 1.4ft TRS PC 6400/840 40 6260 5570 38 147 1,9 1272 700
88070 PRIMA LED 1.5ft TRS PC 3250/840 45 3240 2880 20 144 2,3 1572 940
88080 PRIMA LED 1.5ft TRS PC 4000/840 45 3880 3450 24 144 2,3 1572 940
88090 PRIMA LED 1.5ft TRS PC 5500/840 40 5420 4820 33 146 2,3 1572 940
88100 PRIMA LED 1.5ft TRS PC 8000/840 40 7740 6890 45 153 2,3 1572 940

88010 PRIMA LED 1.2ft TRS PC 1600/840 = suitable replacement for T8 fl. tube light fitting PRIMA 118 – 1 × 18 W
88040 PRIMA LED 1.4ft TRS PC 3200/840 = suitable replacement for T8 fl. tube light fitting PRIMA 136 – 1 × 36 W
88060 PRIMA LED 1.4ft TRS PC 6400/840 = suitable replacement for T8 fl. tube light fitting PRIMA 236 – 2 × 36 W
88080 PRIMA LED 1.5ft TRS PC 4000/840 = suitable replacement for T8 fl. tube light fitting PRIMA 158 – 1 × 58 W
88100 PRIMA LED 1.5ft TRS PC 8000/840 = suitable replacement for T8 fl. tube light fitting PRIMA 258 – 2 × 58 W

PRIMA LED TRS PC Plastic clips

Code Type 1F 3F DALI DALI 1F DALI 3F

88000 PRIMA LED 1.2ft TRS PC 1300/840 x x 88220 x x
88010 PRIMA LED 1.2ft TRS PC 1600/840 x x 88230 x x
88020 PRIMA LED 1.2ft TRS PC 2200/840 x x 88240 x x
88030 PRIMA LED 1.4ft TRS PC 2600/840 88031 88033 88250 88251 88253
88040 PRIMA LED 1.4ft TRS PC 3200/840 88041 88043 88260 88261 88263
88050 PRIMA LED 1.4ft TRS PC 4400/840 88051 88053 88270 88271 88273
88060 PRIMA LED 1.4ft TRS PC 6400/840 88061 88063 88280 88281 88283
88070 PRIMA LED 1.5ft TRS PC 3250/840 88071 88073 88290 88291 88293
88080 PRIMA LED 1.5ft TRS PC 4000/840 88081 88083 88300 88301 88303
88090 PRIMA LED 1.5ft TRS PC 5500/840 88091 88093 88310 88311 88313
88100 PRIMA LED 1.5ft TRS PC 8000/840 88101 88103 88320 88321 88323

PRIMA LED TRS PCc Stainless clips (c)

Code Type 1F 3F DALI DALI 1F DALI 3F

88110 PRIMA LED 1.2ft TRS PCc 1300/840 x x 88330 x x
88120 PRIMA LED 1.2ft TRS PCc 1600/840 x x 88340 x x
88130 PRIMA LED 1.2ft TRS PCc 2200/840 x x 88350 x x
88140 PRIMA LED 1.4ft TRS PCc 2600/840 88141 88143 88360 88361 88363
88150 PRIMA LED 1.4ft TRS PCc 3200/840 88151 88153 88370 88371 88373
88160 PRIMA LED 1.4ft TRS PCc 4400/840 88161 88163 88380 88381 88383
88170 PRIMA LED 1.4ft TRS PCc 6400/840 88171 88173 88390 88391 88393
88180 PRIMA LED 1.5ft TRS PCc 3250/840 88181 88183 88400 88401 88403
88190 PRIMA LED 1.5ft TRS PCc 4000/840 88191 88193 88410 88411 88413
88200 PRIMA LED 1.5ft TRS PCc 5500/840 88201 88203 88420 88421 88423
88210 PRIMA LED 1.5ft TRS PCc 8000/840 88211 88213 88430 88431 88433

Example of type marking: 88363 = PRIMA LED 1.4ft TRS PCc 2600/840 DALI 3F

CZECH LIGHT FITTINGS 167

 PRIMA LED TRS PC, PCc

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) Attachment with the use of side hangers to the wall

LIGHT FITTING DETAILED VIEW

168
PRIMA LED MAX

... for extreme temperatures -40 °C to +65 °C.

USE ADVANTAGES
The light fitting is suitable for indoor and outdoor • Light fitting protection IP66 • Up to 45 % lower electricity consumption when
spaces with roof with extreme ambient tempera- • Minimum ambient temperature up to ta = -40 °C compared to tubes T5
tures from (-40 °C to +65 °C). The light fitting is • Maximum ambient temperature up to ta = 65 °C • Constant luminous flux even in ambient tem-
destined mainly for heating stations, metallurgi- • Lifetime: 50,000 hours / L80B10 perature of -40 °C
cal lines, glass-works, as well as for freezers, • Possibility of using in even higher ambient • Standard model - CRI > 80: 4000 K
cooling plants and other premises without dan- temperatures under the condition of a short- •A  t request CRI > 80: 3000 K, 5000 K
ger of explosion of gases, dusts and flammable ened service life of the light fitting – param- •C  ertification: HACCP
vapors. eters solved within a particular project
• Diffuser: translucent polycarbonate (PC) = high
The light fitting is resistant to dust, moisture and mechanical resistance
spouting water. The body and the diffuser made • Body: grey polycarbonate (PC) = high mechani-
of polycarbonate (PC) have the increased resist- cal resistance
ance against deformation and impact.

(It is necessary to consider exhalation in the air

which can reduce the usability of the plastic at
installations in an aggressive environment, see
also page 325). up to up to
LED
65ºC -40ºC

CRI
220-240 V DALI L 80
>80 B 10

HACCP

CZECH LIGHT FITTINGS 169

 PRIMA LED MAX PCc

PRIMA LED MAX P Cc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 •R  eflector: steel sheet, white colour (RAL 9003)
• Minimum ambient temperature: ta = -40 °C • Ventilation plug: type BVPB-01 made of polyam-
• Maximum ambient temperature: ta = 65 °C ide, size M12 × 1.5
• Lifetime: 50,000 hours / L80B10 •C  lips: stainless steel + polyamide
• Possibility of using in even higher ambient tem- • Sealing: polyurethane (PUR), foamed body
peratures under the condition of a shortened groove
service life of the light fitting – parameters • Cable glands: screwed PG 13.5, or rubber (SBS)
solved within a particular project •D  istance part: polyamide + 10 % glass fibre
• Maximum system efficacy: 146 lm/W • Terminal block: screwless, five-pole (basic ver-
• The watt and lumen values can vary by ± 7,5 % sion), or screwed
• Standard model - CRI > 80: 4000 K • Installation: package contains stainless hooks
• MacAdam = 3 SDCM and stainless brackets
• Diffuser: translucent polycarbonate (PC), UV • Electric equipment: LED modules, current
stable, impact-resistant driver
• Body: grey polycarbonate (PC), UV stable, im-
pact-resistant

PRIMA LED MAX 1.5ft

150° 180° 150°
A
120° 120°
D 95
90° 90°

111
100
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Code Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 65 °C - body: grey polycarbonate - diffuser: translucent polycarbonate
79910 PRIMA LED 1.5ft MAX PCc 4000/840 65 3880 3450 24 144 2,3 1572 940
79900 PRIMA LED 1.5ft MAX PCc 5500/840 60 5420 4820 33 146 2,3 1572 940

PRIMA LED MAX PCc Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h DALI DALI 3F
79910 PRIMA LED 1.5ft MAX PCc 4000/840 79911 79913 x x 79915 79916
79900 PRIMA LED 1.5ft MAX PCc 5500/840 79901 79903 x x 79905 79906

Example of type marking: 79903 = PRIMA LED MAX 1.5ft PCc 5500/840 3F

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) Attachment with the use of side hangers to the wall

LIGHT FITTING DETAILED VIEW

PRIMA LED MAX

170
PRIMA LED SNS

... dustproof, waterproof and impact-resistant.

USE ADVANTAGES
The light fitting is suitable for industrial indoor • Light fitting protection IP66 •S  tandard model - CRI > 80: 4000 K
and outdoor roofed spaces, warehouses, sports • Maximum ambient temperature up to ta = 45 °C •A  t request CRI > 80: 3000 K, 5000 K, 6500 K,
areas, workshops, garages, transport terminals, • Lifetime: 50,000 hours / L90B10 CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
utility structures and laboratories without a dan- • Diffuser: translucent polycarbonate (PC) = high •W  ith built-in microwave motion sensor
ger of explosion of gas, dust and combustible mechanical resistance • The possibility of setting the sensor using the
fumes. • Body: grey polycarbonate (PC) = high mechani- DIP switch
cal resistance • It can be delivered in dimmable or emergency
The light fitting is resistant to dust, moisture and • Up to 45 % lower electricity consumption when version
spouting water. The body and the diffuser made compared to tubes T5 •C  ertification: HACCP
of polycarbonate (PC) have the increased resist- • Current driver with the possibility of constant
ance against deformation and impact. luminous flux for whole lifetime (CLO)
• Constant luminous flux even in ambient tem-
(It is necessary to consider exhalation in the air perature of -25 °C
which can reduce the usability of the plastic at
installations in an aggressive environment, see
also page 325).

up to up to
LED
45ºC -25ºC

CRI
220-240 V DALI L 90
>80 B 10

HACCP

CZECH LIGHT FITTINGS 171

 PRIMA LED SNS PC, PCc

PRIMA LED SNS P C, PCc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 • Clips: polyamide + 15 % glass fibre or stainless
• Maximum ambient temperature: ta = 45  °C, steel + polyamide
Maximum ambient temperature: ta = 0-25 °C • Sealing: polyurethane (PUR), foamed body
(version with emergency back-up source for groove
1 or 3 hours; M1h, M3h) • Cable glands: screwed PG 13.5, or rubber (SBS)
• Maximum system efficacy: 153 lm/W •D  istance part: polyamide + 10 % glass fibre
• The watt and lumen values can vary by ± 7,5 % • Terminal block: screwless, five-pole (basic ver-
• Standard model - CRI > 80: 4000 K sion), or screwed
• MacAdam = 3 SDCM • Installation: package contains stainless hooks
• Lifetime: 50,000 hours / L90B10 and stainless brackets
• Diffuser: translucent polycarbonate (PC), UV • Electric equipment: LED modules, current driv-
stable, impact-resistant er or digital dimmable driver DALI
• Body: grey polycarbonate (PC), UV stable, im- • Motion sensor: 360° range, switch on height
pact-resistant 1 – 6 m, time range 5 sec – 30 min, switch-on
• Reflector: steel sheet, white colour (RAL 9003) sensitivity 2 – 50 lux

PRIMA LED 1.4ft SNS PC

150° 180° 150°
A
120° 120°
D 95
90° 90°

111
100
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Code Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 45 °C - body: grey polycarbonate - diffuser: translucent polycarbonate
64040 PRIMA LED 1.4ft SNS PC 2600/840 45 2580 2300 16 144 1,9 1272 700
64050 PRIMA LED 1.4ft SNS PC 3200/840 45 3110 2770 20 139 1,9 1272 700
64060 PRIMA LED 1.4ft SNS PC 4400/840 40 4350 3870 27 143 1,9 1272 700
64460 PRIMA LED 1.4ft SNS PC 6400/840 40 6260 5570 38 147 1,9 1272 700
64070 PRIMA LED 1.5ft SNS PC 3250/840 45 3240 2880 20 144 2,3 1572 940
64080 PRIMA LED 1.5ft SNS PC 4000/840 45 3880 3450 24 144 2,3 1572 940
64090 PRIMA LED 1.5ft SNS PC 5500/840 40 5420 4820 33 146 2,3 1572 940
64490 PRIMA LED 1.5ft SNS PC 8000/840 40 7740 6890 45 153 2,3 1572 940

64050 PRIMA LED 1.4ft SNS PC 3200/840 = suitable replacement for T8 fl. tube light fitting PRIMA 136 – 1 × 36 W
64460 PRIMA LED 1.4ft SNS PC 6400/840 = suitable replacement for T8 fl. tube light fitting PRIMA 236 – 2 × 36 W
64080 PRIMA LED 1.5ft SNS PC 4000/840 = suitable replacement for T8 fl. tube light fitting PRIMA 158 – 1 × 58 W
64490 PRIMA LED 1.5ft SNS PC 8000/840 = suitable replacement for T8 fl. tube light fitting PRIMA 258 – 2 × 58 W

PRIMA LED SNS PC Non-dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

64040 PRIMA LED 1.4ft SNS PC 2600/840 64140 64340 64044 64045 64344 64345
64050 PRIMA LED 1.4ft SNS PC 3200/840 64150 64350 64054 64055 64354 64355
64060 PRIMA LED 1.4ft SNS PC 4400/840 64160 64360 64064 64065 64364 64365
64460 PRIMA LED 1.4ft SNS PC 6400/840 64461 64462 x x x x
64070 PRIMA LED 1.5ft SNS PC 3250/840 64170 64370 64074 64075 64374 64375
64080 PRIMA LED 1.5ft SNS PC 4000/840 64180 64380 64084 64085 64384 64385
64090 PRIMA LED 1.5ft SNS PC 5500/840 64190 64390 64094 64095 64394 64395
64490 PRIMA LED 1.5ft SNS PC 8000/840 64491 64492 x x x x

PRIMA LED SNS PCc Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

64240 PRIMA LED 1.4ft SNS PCc 2600/840 64540 64640 64244 64245 64644 64645
64250 PRIMA LED 1.4ft SNS PCc 3200/840 64550 64650 64254 64255 64654 64655
64260 PRIMA LED 1.4ft SNS PCc 4400/840 64560 64660 64264 64265 64664 64665
64760 PRIMA LED 1.4ft SNS PCc 6400/840 64761 64762 x x x x
64270 PRIMA LED 1.5ft SNS PCc 3250/840 64570 64670 64274 64275 64674 64675
64280 PRIMA LED 1.5ft SNS PCc 4000/840 64580 64680 64284 64285 64684 64685
64290 PRIMA LED 1.5ft SNS PCc 5500/840 64590 64690 64294 64295 64694 64695
64790 PRIMA LED 1.5ft SNS PCc 8000/840 64791 64792 x x x x

Example of type marking: 64644 = PRIMA LED 1.4ft SNS PC 2600/840 3F M1h

172
 PRIMA LED SNS PC, PCc

PRIMA LED SNS PC CORRIDOR Digital dimmable driver - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

64043 PRIMA LED 1.4ft SNS PC 2600/840 CORRIDOR 64143 64343 64047 x 64347 x
64053 PRIMA LED 1.4ft SNS PC 3200/840 CORRIDOR 64153 64353 64057 x 64357 x
64063 PRIMA LED 1.4ft SNS PC 4400/840 CORRIDOR 64163 64363 64067 x 64367 x
64073 PRIMA LED 1.5ft SNS PC 3250/840 CORRIDOR 64173 64373 64077 64078 64377 64378
64083 PRIMA LED 1.5ft SNS PC 4000/840 CORRIDOR 64183 64383 64087 64088 64387 64388
64093 PRIMA LED 1.5ft SNS PC 5500/840 CORRIDOR 64193 64393 64097 64098 64397 64398

PRIMA LED SNS PCc CORRIDOR Digital dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

64243 PRIMA LED 1.4ft SNS PCc 2600/840 CORRIDOR 64543 64643 64247 x 64647 x
64253 PRIMA LED 1.4ft SNS PCc 3200/840 CORRIDOR 64553 64653 64257 x 64657 x
64263 PRIMA LED 1.4ft SNS PCc 4400/840 CORRIDOR 64563 64663 64267 x 64667 x
64273 PRIMA LED 1.5ft SNS PCc 3250/840 CORRIDOR 64573 64673 64277 64278 64677 64678
64283 PRIMA LED 1.5ft SNS PCc 4000/840 CORRIDOR 64583 64683 64287 64288 64687 64688
64293 PRIMA LED 1.5ft SNS PCc 5500/840 CORRIDOR 64593 64693 64297 64298 64697 64698

Example of type marking: 64693 = PRIMA LED 1.5ft SNS PCc 5500/840 CORRIDOR 3F

LEGEND
SNS 1F 1-phase 3 core through-wiring in the luminaire for connection of max. 5 slave luminaires
SNS 3F 3-phase 5 core through-wiring in the luminaire for connection of max. 5 slave luminaires (sensor connected to L3)
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination
SNS 3F Mxh 3-phase 5 core through-wiring in the luminaire for connection of max. 5 slave luminaires (sensor and emergency unit connected to L3)

CORRIDOR version with digital dimmable driver DALI and set corridor function
CORRIDOR 1F 1-phase 5 core through-wiring in the luminaire for connection of max. 20 luminaires
CORRIDOR 3F 3-phase 7 core through-wiring in the luminaire for connection of max. 20 luminaires (sensor connected to L3)
CORRIDOR 3F Mxh 3-phase 7 core through-wiring in the luminaire for connection of max. 20 luminaires (sensor and emergency unit connected to L3)

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) Attachment with the use of side hangers to the wall

LIGHT FITTING DETAILED VIEW

PRIMA LED SNS

CZECH LIGHT FITTINGS 173

 PRIMA LED Ex

… for explosion hazard environment group II, category 3 (zone 2, 22).

USE ADVANTAGES
The light fitting is suitable for the environment • Light fitting protection IP66 • Standard model - CRI > 80: 4000 K
with a danger of explosion of gas, dust and • Maximum ambient temperature up to ta = 60°C • At request CRI > 80: 3000 K, 5000 K, 6500 K
combustible fumes. The light fittings meet the • Lifetime: 50,000 hours / L90B10 • Clips: stainless steel + polyamide + 15 %
requirements of Government Decree 116/2016 • Diffuser: translucent polycarbonate (PC) = high glass fibre
Coll. and European Community Directive mechanical resistance • Through-wiring of up to 10 wires at body
No.2014/34/EU. • Body: grey polycarbonate (PC) = high mechani- • At request also versions according to the stand-
cal resistance ard for EAC states (Russia, Kazakhstan, Bela-
The light fitting is certified for the environment: • Up to 45 % lower electricity consumption when rus, Armenia)
II 3G Ex nR IIC T6 Gc   compared to fluorescent tubes • Certification: TÜV CY 22 ATEX 0206610 X Issue: 01
II 3D Ex tc IIIC T70°C Dc
• Current driver with the possibility of constant
luminous flux for whole lifetime (CLO)
The basic requirements for safety and health pro-
tection are secured by the verification of conformity • Constant luminous flux even in ambient tem-
with the standards according to ČSN EN 60079-15, perature of -25 °C
ČSN EN 60079-0 and ČSN EN 60079-31.

The light fitting is resistant to dust, moisture and

spouting water. The body and the diffuser made
of polycarbonate (PC) have the increased resist-
ence against deformation and impact.
up to up to

(It is necessary to consider exhalation in the air LED

55ºC -25ºC
reducing the usability of the plastic at installa-
tions in an aggressive environment, see also 220-250 V
0/50/60
DALI CRI
L 90
>80 B 10
page 325. Hz

174
 PRIMA LED Ex PCc

PRIMA LED Ex P Cc
TECHNICAL DESCRIPTION
• Light fitting protection: IP66 • Clips: stainless steel + polyamide + 15 % glass fibre
• Maximum ambient temperature: from -25 to 60 °C •V  entilation plug steel, size M12 × 1,5 ATEX
• Maximum ambient temperature: (for version with emergency back-up source
from 0 to 50 °C (version with emergency back- M1h, M3h)
up source for 1 or 3 hours; M1h, M3h) •C  able glands: screwed M20 × 1,5 ATEX
• Maximum system efficacy: 157 lm/W • Distance part: polyamide + 10 % glass fibre,
• The watt and lumen values can vary by ± 7,5 % serves to suspend the reflector during assembly
• Standard model - CRI > 80: 4000 K •T  erminal block: screwless, five-pole (version
• MacAdam = 3 SDCM 1.4ft and 1.5ft), three-pole incl. earthing tape &
• Lifetime: 50,000 hours / L90B10 screw for a perfect connection (basic version)
• Diffuser: translucent polycarbonate (PC), UV • Installation: package contains stainless hooks
stable, impact-resistant and stainless brackets
• Body: grey polycarbonate (PC), UV stable, •E  lectric equipment: LED modules, current
impact-resistant driver, halogen-free wires with higher tem-
• Reflector: steel sheet, white colour (RAL 9003) perature resistance

PRIMA LED Ex 1.4ft PRIMA LED Ex 2.5ft

150° 180° 150° 150° 180° 150°

A
D 145 120° 120° 120° 120°

90° 90° 90° 90°

111
100
60° 60°
C0 60° 60°

C90
30° 0° 30° 30° 0° 30°

Minimal and Luminous flux Luminous flux Power System Net

A D
Code Type maximal ambient of LED modules of light fitting consumption efficacy weight
[mm] [mm]
temperature [°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 60 °C - body: grey polycarbonate - diffuser: translucent polycarbonate
10628 PRIMA LED Ex 1.2ft PCc 1600/840 -25|60 1840 1690 11 154 2,0 662 350
10629 PRIMA LED Ex 1.2ft PCc 2200/840 -25|55 2560 2350 16 147 2,0 662 350
14810 PRIMA LED Ex 1.4ft PCc 3200/840 -25|60 3620 3330 23 145 3,2 1272 700
14820 PRIMA LED Ex 1.4ft PCc 4400/840 -25|55 5070 4660 31 150 3,3 1272 700
63850 PRIMA LED Ex 1.4ft PCc 6400/840 -25|55 7300 6710 44 153 3,3 1272 700
14830 PRIMA LED Ex 1.5ft PCc 4000/840 -25|60 4520 4150 27 154 4,1 1572 940
14840 PRIMA LED Ex 1.5ft PCc 5500/840 -25|55 6320 5810 38 153 4,2 1572 940
63860 PRIMA LED Ex 1.5ft PCc 8000/840 -25|55 9030 8300 53 157 4,2 1572 940
10633 PRIMA LED Ex 2.2ft PCc 3200/840 -25|60 3620 3330 22 151 2,1 662 350
10637 PRIMA LED Ex 2.2ft PCc 4400/840 -25|55 5120 4710 31 152 2,1 662 350
14850 PRIMA LED Ex 2.4ft PCc 6400/840 -25|60 7300 6710 43 156 3,4 1272 700
14860 PRIMA LED Ex 2.4ft PCc 8800/840 -25|55 10160 9340 60 156 3,5 1272 700
63865 PRIMA LED Ex 2.4ft PCc 12800/840 -25|40 14490 13330 85 157 3,7 1272 700
14870 PRIMA LED Ex 2.5ft PCc 8000/840 -25|60 9040 8310 54 154 4,3 1572 940
14880 PRIMA LED Ex 2.5ft PCc 11000/840 -25|55 12050 11080 71 156 4,4 1572 940
63851 PRIMA LED Ex 2.5ft PCc 16000/840 -25|40 17960 16520 106 156 4,6 1572 940
63880 PRIMA LED Ex 2.5ft PCc 20000/840 -25|40 19200 17660 118 150 4,6 1572 940

14810 PRIMA LED Ex 1.4ft PCc 3200/840 = suitable replacement for PRIMA Ex 136 PCc E – 1 × 36 W
14830 PRIMA LED Ex 1.5ft PCc 4000/840 = suitable replacement for PRIMA Ex 158 PCc E – 1 × 58 W
14850 PRIMA LED Ex 2.4ft PCc 6400/840 = suitable replacement for PRIMA Ex 236 PCc E – 2 × 36 W
14870 PRIMA LED Ex 2.5ft PCc 8000/840 = suitable replacement for PRIMA Ex 258 PCc E – 2 × 58 W

Max. ambient Luminous flux Luminous flux Power System Net

A D
Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
Version with emergency back-up source M1h, M3h
PRIMA LED Ex 1.2ft PCc 1600/840 Mxh 0|45 1840 1690 11 154 2,5 662 350
PRIMA LED Ex 1.2ft PCc 2200/840 Mxh 0|45 2560 2350 16 147 2,5 662 350
PRIMA LED Ex 1.4ft PCc 3200/840 Mxh 0|50 3620 3330 23 145 3,7 1272 700
PRIMA LED Ex 1.4ft PCc 4400/840 Mxh 0|50 5070 4660 31 150 3,7 1272 700
PRIMA LED Ex 1.5ft PCc 4000/840 Mxh 0|50 4520 4150 27 154 4,6 1572 940
PRIMA LED Ex 1.5ft PCc 5500/840 Mxh 0|50 6320 5810 38 153 4,7 1572 940
PRIMA LED Ex 2.2ft PCc 3200/840 Mxh 0|40 3620 3330 22 151 2,6 662 350
PRIMA LED Ex 2.2ft PCc 4400/840 Mxh 0|35 5120 4710 31 152 2,6 662 350
PRIMA LED Ex 2.4ft PCc 6400/840 Mxh 0|45 7300 6710 43 156 3,9 1272 700
PRIMA LED Ex 2.4ft PCc 8800/840 Mxh 0|40 10160 9340 60 156 3,9 1272 700
PRIMA LED Ex 2.5ft PCc 8000/840 Mxh 0|45 9040 8310 54 154 4,8 1572 940
PRIMA LED Ex 2.5ft PCc 11000/840 Mxh 0|40 12050 11080 71 156 4,8 1572 940

Energy consumption of Mxh increased by 3 W until battery fully charged (max. 24 hours).

CZECH LIGHT FITTINGS 175

 PRIMA LED Ex PCc

PRIMA LED Ex PCc Non-dimmable driver - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

10628 PRIMA LED Ex 1.2ft PCc 1600/840 10638 10646 63853 63890 63863 63854
10629 PRIMA LED Ex 1.2ft PCc 2200/840 10639 10647 63882 63894 63868 63883
14810 PRIMA LED Ex 1.4ft PCc 3200/840 14811 14813 14814 14815 14817 14818
14820 PRIMA LED Ex 1.4ft PCc 4400/840 14821 14823 14824 14825 14827 14828
63850 PRIMA LED Ex 1.4ft PCc 6400/840 63888 63881 x x x x
14830 PRIMA LED Ex 1.5ft PCc 4000/840 14831 14833 14834 14835 14837 14838
14840 PRIMA LED Ex 1.5ft PCc 5500/840 14841 14843 14844 14845 14847 14848
63860 PRIMA LED Ex 1.5ft PCc 8000/840 63892 63889 x x x x
10633 PRIMA LED Ex 2.2ft PCc 3200/840 10642 10649 x x x x
10637 PRIMA LED Ex 2.2ft PCc 4400/840 10643 10652 x x x x
14850 PRIMA LED Ex 2.4ft PCc 6400/840 14851 14853 14854 14855 14857 14858
14860 PRIMA LED Ex 2.4ft PCc 8800/840 14861 14863 14864 14865 14867 14868
63865 PRIMA LED Ex 2.4ft PCc 12800/840 63861 63893 x x x x
14870 PRIMA LED Ex 2.5ft PCc 8000/840 14871 14873 14874 14875 14877 14878
14880 PRIMA LED Ex 2.5ft PCc 11000/840 14881 14883 14884 14885 14887 14888
63851 PRIMA LED Ex 2.5ft PCc 16000/840 63866 63862 x x x x
63880 PRIMA LED Ex 2.5ft PCc 20000/840 63852 63867 x x x x

Example of type marking: 14853 = PRIMA LED Ex 2.4ft PCc 6400/840 3F

PRIMA LED Ex PCc DALI Digital dimmable driver DALI - stainless clips (c)

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

10658 PRIMA LED Ex 1.2ft PCc 1600/840 DALI 10672 x 63897 63872 x x
10659 PRIMA LED Ex 1.2ft PCc 2200/840 DALI 10678 x 63901 63877 x x
14910 PRIMA LED Ex 1.4ft PCc 3200/840 DALI 14911 14913 14914 14915 14917 14918
14920 PRIMA LED Ex 1.4ft PCc 4400/840 DALI 14921 14923 14924 14925 14927 14928
63891 PRIMA LED Ex 1.4ft PCc 6400/840 DALI 63870 63900 x x x x
14930 PRIMA LED Ex 1.5ft PCc 4000/840 DALI 14931 14933 14934 14935 14937 14938
14940 PRIMA LED Ex 1.5ft PCc 5500/840 DALI 14941 14943 14944 14945 14947 14948
63895 PRIMA LED Ex 1.5ft PCc 8000/840 DALI 63875 63871 x x x x
10668 PRIMA LED Ex 2.2ft PCc 3200/840 DALI 10682 x 63858 63886 x x
10669 PRIMA LED Ex 2.2ft PCc 4400/840 DALI 10684 x 63898 63902 x x
14950 PRIMA LED Ex 2.4ft PCc 6400/840 DALI 14951 14953 14954 14955 14957 14958
14960 PRIMA LED Ex 2.4ft PCc 8800/840 DALI 14961 14963 14964 14965 14967 14968
63864 PRIMA LED Ex 2.4ft PCc 12800/840 DALI 63856 63876 x x x x
14970 PRIMA LED Ex 2.5ft PCc 8000/840 DALI 14971 14973 14974 14975 14977 14978
14980 PRIMA LED Ex 2.5ft PCc 11000/840 DALI 14981 14983 14984 14985 14987 14988
63869 PRIMA LED Ex 2.5ft PCc 16000/840 DALI 63884 63857 x x x x
63855 PRIMA LED Ex 2.5ft PCc 20000/840 DALI 63896 63885 x x x x

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) Attachment with the use of side hangers to the wall

LIGHT FITTING DETAILED VIEW

PRIMA LED Ex

176
PRIMA LED TUBE

... dustproof, waterproof and impact-resistant.

USE ADVANTAGES
The light fitting is suitable for industrial indoor •L  ight fitting protection IP66
and outdoor roofed spaces, warehouses, sports • Diffuser: transparent polycarbonate (PC) = high
areas, workshops, garages, transport terminals mechanical resistance
and utility structures without a danger of explo- • Body: grey polycarbonate (PC) = high mechani-
sion of gas, dust and combustible fumes. cal resistance
• Constant luminous flux even in ambient tem-
The light fitting is resistant to dust, moisture and perature of -25 °C
spouting water. The body and the diffuser made • Through-wiring of up to 10 wires at bodies of
of polycarbonate (PC) have the increased resist- 2x120 and 2x150 type light fittings
ance against deformation and impact. • It can be delivered in emergency version

(It is necessary to consider exhalation in the air

which can reduce the usability of the plastic at
installations in an aggressive environment, see
also page 325).

up to up to
LED
35ºC -25ºC

220-240 V

HACCP

CZECH LIGHT FITTINGS 177

 PRIMA LED TUBE PC, PCc

PRIMA LED TUBE PC, PCc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 • Clips: polyamide + 15 % glass fibre or stainless
• Maximum ambient temperature: ta = 35  °C, steel + polyamide
Maximum ambient temperature: ta = 0-25 °C • Sealing: polyurethane (PUR), foamed body
(version with emergency back-up source for groove
1 or 3 hours; M1h, M3h) •C  able glands: rubber (SBS)
• Maximum system efficacy: 117 lm/W •D  istance part: polyamide + 10 % glass fibre
• The watt and lumen values can vary by ± 7,5 % • Terminal block: screwless, three-pole (basic
• MacAdam = 3 SDCM version)
• Diffuser: transparent polycarbonate (PC), UV • Installation: package contains stainless hooks
stable, impact-resistant and stainless brackets
• Body: grey polycarbonate (PC), UV stable, im- • Electric equipment: for LED tubes Osram
pact-resistant SubstiTUBE T8 EM Value 4000 K, 6500 K; lam-
• Reflector: steel sheet, white colour (RAL 9003) pholder G13

PRIMA LED TUBE 1x120 PRIMA LED TUBE 2x120

150° 180° 150° 150° 180° 150°

A
120° 120° 120° 120°
D 145 95

111
90° 90° 90° 90°

100
60° 60°
C0 60° 60°

C90
30° 0° 30° 30° 0° 30°

Luminous flux Luminous flux Power System Net

A D
Code Type of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[lm]* [lm] [W] [lm/W] [kg]
For ambient temperature ta = 35 °C - body: grey polycarbonate - diffuser: transparent polycarbonate - lampholder G13
37510 PRIMA LED TUBE 1x60 PC 800* 770 6,6 117 0,8 662 350
37520 PRIMA LED TUBE 1x120 PC 1800* 1730 15 115 1,7 1272 700
37530 PRIMA LED TUBE 1x150 PC 2200* 2120 18,3 116 1,9 1572 940
37540 PRIMA LED TUBE 2x60 PC 1600* 1480 13,2 112 1,1 662 350
37550 PRIMA LED TUBE 2x120 PC 3600* 3330 30 111 2,1 1272 700
37560 PRIMA LED TUBE 2x150 PC 4400* 4070 36,6 111 2,5 1572 940

* - total luminous flux of the light fitting with Osram SubstiTUBE T8 EM Value sources

PRIMA LED TUBE PC For LED tubes Osram SubstiTUBE T8 EM Value - plastic clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

37510 PRIMA LED TUBE 1x60 PC 37511 37513 x x x x
37520 PRIMA LED TUBE 1x120 PC 37521 37523 x x x x
37530 PRIMA LED TUBE 1x150 PC 37531 37533 x x x x
37540 PRIMA LED TUBE 2x60 PC 37541 37543 37544 37545 37546 37547
37550 PRIMA LED TUBE 2x120 PC 37551 37553 37554 37555 37556 37557
37560 PRIMA LED TUBE 2x150 PC 37561 37563 37564 37565 37566 37567

PRIMA LED TUBE PCc For LED tubes Osram SubstiTUBE T8 EM Value - stainless clips (c)
37610 PRIMA LED TUBE 1x60 PCc 37611 37613 x x x x
37620 PRIMA LED TUBE 1x120 PCc 37621 37623 x x x x
37630 PRIMA LED TUBE 1x150 PCc 37631 37633 x x x x
37640 PRIMA LED TUBE 2x60 PCc 37641 37643 37644 37645 37646 37647
37650 PRIMA LED TUBE 2x120 PCc 37651 37653 37654 37655 37656 37657
37660 PRIMA LED TUBE 2x150 PCc 37661 37663 37664 37665 37666 37667

Example of type marking: 37653 = PRIMA LED TUBE 2x120 PCc 3F

LEGEND
1F 1-phase 3 core through-wiring in the luminaire
3F 3-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination
3F Mxh 3-phase 5 core through-wiring in the luminaire
(L3 used for emergency unit unswitched power supply)

178
 PRIMA LED TUBE PC, PCc

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) Attachment with the use of side hangers to the wall

LIGHT FITTING DETAILED VIEW

PRIMA LED TUBE

CZECH LIGHT FITTINGS 179

 PRIMA LED accessories

BZ – side hanger
It serves to attach the light fitting to the wall with the possibility of its positioning.

Weight
Code Type Description
[kg]
90002 BZ side hanger with blocking (set for 1 light fitting) 0,4

Canalis busbar system connector

The connector enables a quick 1 phase or 3 phase interconnection of light fittings without their opening.

Weight
Code Type Description
[kg]
79001 KBA 40 ZU light fitting suspended holder - Canalis KBA system 0,1
70002 KBC 10 CC211 connector with 1 m cable - Canalis KBA system 0,2

Stucchi or Wieland connector

The connector enables a quick 1 phase or 3 phase interconnection of light fittings without their opening.

OM – protective grid
The metal grid protects the light fitting against mechanical damage and unauthorised handling. It is attached to the surface with the use of screws.
The surface is treated with the RAL 9003 powder-coated colour.

Weight
Code Type Description
[kg]
11941 OM 218 protective grid for types 218, 214/224, x.2ft (700 × 220 × 130 mm) 1,0
11942 OM 236 protective grid for types 236, 228/254, x.4ft (1300 × 220 × 130 mm) 1,7
11943 OM 258 protective grid for types 258, 235/249/280, x.5ft (1600 × 220 × 130 mm) 2,0

180
 CONCEPT RED

… for cows in the barns, chemically resistant.

USE
Cows barely detect a red light and therefore it is The light fixtures withstand exposure to chemi-
a perfect solution for illumination of barns when cally aggressive environments (ammonia in the
workers have to work with the animals during a air) typical of livestock farms.
time of the day when the cows have night. We
know that cows need eight hours a day of dark- The body made of ABS and the diffuser made of
ness to be able to rest well. This solution saves AC have increased chemical resistance.
you money and allows you to go on your rounds
or carry out work without disturbing the cows. In addition to being protected against dust and
humidity (IP66), the fixtures boast excellent
It can be integrated into our INNOVA and FUTU- thermal resistance, withstanding temperatures
RA lighting. up to 50 °C.

IP69-rated, our INNOVA-range fittings may be

washed using hot water (up to 80 °C).

up to up to
LED
50ºC -25ºC

CRI
220-240 V DALI L 90
>80 B 10

HACCP

182
 CONCEPT RED

INNOVA
INNOVA 1.5ft ABS RED
A 150° 180° 150°

D 120° 120°

variable mounting pitch 118 90

90° 90°

106
93
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
EXAMPLE
INNOVA 1.5ft ABS 4000/840 50 4000 3570 27 132 1,8 1455 700-980
INNOVA 1.5ft ABS 4000/840 RED 50 4000 / 620 3570 / 550 27 / 12 132 / 45 2,0 1455 700-980

FUTURA
FUTURA 2.5ft ABS RED
150° 180° 150°

A
120° 120°
D 145

90° 90°

111
100
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
EXAMPLE
FUTURA 2.5ft ABS 11000/840 45 11000 9620 71 135 3,9 1452 940
FUTURA 2.5ft ABS 11000/840 RED 45 11000 / 620 9620 / 550 71 / 12 135 / 45 4,1 1452 940

LUMINAIRES FITTED WITH A RED LIGHT MODULE – DEMO

CZECH LIGHT FITTINGS 183

 CONCEPT BLUE

… for poultry farms, chemically resistant.

USE
Light fixtures fitted with our special blue light The body made of ABS and the diffuser made of
producing LED module are primarily designed AC have increased chemical resistance. In addi-
to be used in poultry farms. The benefit of this tion to being protected against dust and humidity
specific colour is it calms the poultry and sup- (IP66), the fixtures boast excellent thermal re-
presses aggressive its behavior. sistance, withstanding temperatures up to 50 °C.

The light fixtures contain only the blue light LED IP69-rated, our INNOVA-range fittings may be
module. washed using hot water (up to 80 °C).

Our INNOVA, and FUTURA-range luminaires

may be fitted with this module.

The light fixtures withstand exposure to chemi-

cally aggressive environments (ammonia in the
air) typical of livestock farms.

up to up to
LED
50ºC -25ºC

CRI
220-240 V DALI L 90
>80 B 10

HACCP

184
 CONCEPT BLUE

INNOVA
INNOVA 1.5ft ABS BLUE
A 150° 180° 150°

D 120° 120°

variable mounting pitch 118 90

90° 90°

106
93
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
EXAMPLE
INNOVA 1.5ft ABS 4000/840 50 4000 3570 27 132 1,8 1455 700-980
INNOVA 1.5ft ABS 4000/840 BLUE 50 4000 / 640 3570 / 560 27 / 16 132 / 35 2,0 1455 700-980

FUTURA
FUTURA 2.5ft ABS BLUE
150° 180° 150°

A
120° 120°
D 145

90° 90°

111
100
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
EXAMPLE
FUTURA 2.5ft ABS 11000/840 45 11000 9620 71 135 3,9 1452 940
FUTURA 2.5ft ABS 11000/840 BLUE 45 11000 / 640 9620 / 560 71 / 16 135 / 35 4,1 1452 940

LUMINAIRES FITTED WITH A BLUE LIGHT MODULE – DEMO

CZECH LIGHT FITTINGS 185

 HUMAN CENTRIC LIGHTING

... to boost circadian rhythms.

INTRODUCING HUMAN CENTRIC LIGHTING SPECIFICATIONS

Ours is an era when people spend a big part of if you have to work late today to meet a rapidly • Lifetime: 50,000 hours (L80B10)
their day indoors in artificial light. Human cen- approaching deadline, sticking to cooler light • Constant light output (CLO) for the duration of
tric lighting (HCL) is designed to mimic natural longer will help you stay alert and creative. In the product’s lifetime (if fitted with a DALI)
daylight as closely as possible to match the ideal contrast, a few hours later, with the children in • Emergency version available
circadian rhythms and thereby improve motiva- bed and a productive day behind you, it is finally • Controlled through a mobile app installed on
tion and productivity, enhance concentration and time to enjoy a bit of a me time, perhaps with a your smartphone or tablet
promote well-being at workplace. book in your lap. Whatever the way you choose to • Adjustable correlated colour temperature
wind down before going to sleep, warm light will (CCT)
Adjustability of correlated colour temperature help you do just that. And it will take some of the • Dimming
(CCT) to suit different tasks and times of day is a strain off your eyes too. • Lighting planning with time programmes
major benefit of HCL. While low CCT (warm) light • Creation of separately controlled groups and
helps users to calm down such as when facing HCL is commonly used in offices, hospitals, scenes possible
high stress, cooler white light (high CCT) ener- schools, libraries and care homes but is recently • Simple system adjustment and extension
gizes and boosts productivity and creativity. also gaining popularity in residential spaces as
well as in industrial and agricultural facilities.
Here is how HCL works. Imagine you and your
children are waking up on a Monday morning.
Warm, lower intensity light at sunrise will give
your family a soft start to the day while cooler LED
light will help you concentrate at the important
CRI
meeting later on. Switching back to warm light 220-240 V DALI L 80
>80 B 10
later in the afternoon is what people normally
do because it promotes relaxation. However,

186
 HUMAN CENTRIC LIGHTING

NANOTTICA
NANOTTICA 1.5ft ABS TW
150° 180° 150°

A
120° 120°
D
98
variable mounting pitch
90° 90°

84
79
C0
60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
EXAMPLE
NANOTTICA 1.5ft ABSc 5500/827-865 TW 45 5500 4670 39 126 2,0 1455 970 - 1230

LINEA
LINEA 1.4ft TW
150° 180° 150°

A 120° 120°
D 159 109

90° 90°

85
C0
60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
EXAMPLE
LINEA 1.4ft 4400/827-865 TW 35 4400 3720 30 124 1,9 1160 650

NAOS
NAOS 1.5ft TW
150° 180° 150°

A 195 145
120° 120°
150 100
D
90° 90°
34

C0
60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
EXAMPLE
NAOS 1.5ft 5500/827-865 TW 35 5500 4500 39 115 4,4 1460 1310

CZECH LIGHT FITTINGS 187

 HUMAN CENTRIC LIGHTING

CRI > 80
Luminous flux Power
Type of LED modules consumption
[lm] [W]
CRI > 80
Luminaire 1.2ft TW xx 2200/827-865 2200 16
Luminaire 1.4ft TW xx 4400/827-865 4400 31
Luminaire 1.5ft TW xx 5500/827-865 5500 39
Luminaire 2.2ft TW xx 4400/827-865 4400 31
Luminaire 2.4ft TW xx 8800/827-865 8800 62
Luminaire 2.5ft TW xx 11000/827-865 11000 78

Example: PRIMA LED 1.5ft TW PC 5500/827-865

CRI > 90
Luminous flux Power
Type of LED modules consumption
[lm] [W]
CRI > 90
Luminaire 1.2ft TW xx 3200/927-965 3200 29
Luminaire 1.4ft TW xx 6400/927-965 6400 49
Luminaire 1.5ft TW xx 8000/927-965 8000 60

Example: NAOS 1.2ft TW 3200/927-965

LEGEND
xx – materials (PC, ABS, applicable for the luminaires INNOVA, FUTURA and PRIMA LED)
TW – HUMAN CENTRIC LIGHTING

A TW module is available for most of our luminaires:

Industrial fittings:
NANOTTICA
INNOVA
FUTURA
PRIMA LED
PERUN SLIM
ALUMAX LED

Indoor fittings:
LINEA and LINEA SQUARE
BELTR LED
NAOS
LUXOR LED

LUMINAIRES FITTED WITH A TUNABLE WHITE LIGHT MODULE – DEMO

188
TrEx

INDUSTRIAL
STEEL / INOX
DUSTPROOF
WATERPROOF
 PRODUCT OVERVIEW

TrEx – industrial metal LED light fitting for the environment with a danger of explosion

TrEx
page 192

IP66 TrEx
page 192

TrEx
ACCESSORIES
page 196

TrEx
ACCESSORIES
page 196

CZECH LIGHT FITTINGS 191

 TrEx

… for explosion hazard environment group II, category 2 (zone 1, 21 and 2, 22).
USE ADVANTAGES
The metal light fitting with satinated tempered safety glass is suitable for environment with hazard of •L  ight fitting protection IP66
explosion of gases, vapours and dust for zones 1, 21 and 2,22. It meets the requirements of the European • High temperature resistance on a range from
Community Directive No. 2014/34/EU. It is resistant against chemically aggressive environment, there- ta = -40 °C to ta = 55 °C
fore it fits for industrial premises like chemical factories, plants for processing of gases and oil, power •F or hazardous areas of zones 1, 21 and 2, 22
plants, army facilities, automotive factories, laboratories and other facilities of heavy and mechanical •L ifetime: 75 000 hours / L80B50 at ta = 55 °C,
engineering. The light fitting in IP66 protection is resistant against dust and splashing water. 110 000 hours / L70B50 at ta = 55°C
• Cable glands: plastic ATEX M20 × 1,5, or metal-
lic (INOX version on request)
USE IN ENVIRONMENT WITH HAZARD OF EXPLOSION • Wide fixing options including recessed frame
Ex II 2G Ex db eb mb op is IIC T4 Gb for false ceiling
Light fitting with disconnector
Light fitting Mxh with disconnector • Up to 45 % lower power consumption as com-
Ex II 2D Ex tb IIIC T68°C Db
TÜV CY 21 ATEX 0206562X pared to fluorescent tubes
Light fitting without disconnector Ex II 2G Ex eb mb op is IIC T4 Gb • Constant luminous flux even at ambient tem-
Light fitting Mxh without disconnector Ex II 2D Ex tb IIIC T68°C Db perature of -40 °C
AR19ATEX131U Ex battery box HM 4Ah Ex II 2G Ex d IIC T4 Gb • Standard model CRI > 80: 4000 K, at request
CRI > 80: 3000 K, 5000 K, 5700 K
TÜV CY 20 ATEX 0206368 U Ex disconnector OT 2A-2C Ex d Ex II 2G Ex db IIC Gb
• Optional through-wiring of up to 7 wires at
reflector
The basic requirements for safety and health protection are secured by verification of conformity with
EN 60079-0, EN 60079-7, EN 60079-18, EN 60079-1, EN 60079-28 and EN 60079-31.

up to up to
LED
55ºC -40ºC

CRI
220-240 V
>80

2261

192
 TrEx

TrEx
TECHNICAL DESCRIPTION
• Light fitting protection: IP66 • Installation: the package includes suspensory
• Minimum ambient temperature: ta = -40 °C eyes 2 × M6
• Maximum ambient temperature: ta = 55 °C • Electric equipment: LED modules, current driv-
• Ambient temperature: ta = 0 – 40 °C (version er, disconnector and Ex battery box with ATEX
with emergency back-up source for 1 or certificate
3 hours; M1h, M3h) •T  he watt and lumen values can vary by ± 7,5 %
• Maximum system efficacy: 147 lm/W
• CRI > 80: 4000 K AT REQUEST
• MacAdam = 3 SDCM
• CRI > 80: 3000 K, 5000 K, 5700 K
• Lifetime: 75 000 hours / L80B50 at ta = 55 °C,
•H  alogen-free wires
110 000 hours / L70B50 at ta = 55°C
• Design modification for fixing and connecting in
• Body: powder coated steel sheet RAL 9003, or
the false ceiling
INOX (AISI 304)
• Diffuser:
 transparent tempered safety glass
• Diffuser: satinated tempered safety glass
• Cable glands: metal or armoured ATEX cable
• Sealing: glued EPDM
glands M20 × 1,5 or M25 × 1,5
• Cable glands: plastic ATEX M20 × 1,5, or metallic
• Increased number of cable entries on sides and
(INOX version on request)
in upper part of light fitting if recessed frame for
• Terminal block: ATEX, screwless WAGO, Cable
false ceiling mounted
cross-section max: 4 mm2

TrEx 1.4ft
150° 180° 150°

A 300 120° 120°

D
90° 90°

115
C0 60° 60°

C90
30° 0° 30°

Min. and max.

Luminous flux Luminous flux System Net
ambient System input A D
Type of LED modules of light fitting efficiency weight
temperature [W] [mm] [mm]
[lm] [lm] [lm/W] [kg]
[°C]
Light fitting without a battery system
TrEx 1.2ft 3200/840 -40 / 55 3200 2350 19 123 8,3 730 350
TrEx 1.2ft 4400/840 -40 / 55 4400 3360 27 124 8,3 730 350
TrEx 1.4ft 6400/840 -40 / 55 6400 4700 35 134 14,6 1300 700
TrEx 1.4ft 8800/840 -40 / 55 8800 6720 50 134 14,6 1300 700
TrEx 1.5ft 8000/840 -40 / 55 8000 5880 40 147 17,3 1580 700
TrEx 1.5ft 11000/840 -40 / 55 11000 8400 59 142 17,3 1580 700
TrEx 2.2ft 6400/840 -40 / 55 6400 4700 35 134 8,9 730 350
TrEx 2.2ft 8800/840 -40 / 50 8800 6720 50 134 8,9 730 350
TrEx 2.4ft 12800/840 -40 / 55 12800 9400 67 140 16,0 1300 700
TrEx 2.4ft 17600/840 -40 / 50 17600 13440 100 134 16,0 1300 700
TrEx 2.5ft 16000/840 -40 / 55 16000 11760 80 147 18,9 1580 700
TrEx 2.5ft 22000/840 -40 / 50 22000 16800 121 138 18,9 1580 700

Min. and max. Emergency light Emergency light Power

Net
ambient fluxof light fitting fluxof light fitting in standby Battery
Type weight
temperature 1h 3h mode type
[kg]
[°C] [lm] [lm] [W]
EM emergency lighting kit
TrEx 1.2ft 4400/840 Mxh 0 / 40 990 630 2 NiCd HT +1,3
TrEx 1.4ft 8800/840 Mxh 0 / 40 790 580 2 NiCd HT +1,3
TrEx 1.5ft 11000/840 Mxh 0 / 40 790 560 2 NiCd HT +1,3

CZECH LIGHT FITTINGS 193

 TrEx

TrEx DIS Light fitting with disconnector

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

10339 TrEx 1.2ft 3200/840 DIS 10357 10379 x x x x
10341 TrEx 1.2ft 4400/840 DIS 10358 10382 10409 10429 10445 10451
10342 TrEx 1.4ft 6400/840 DIS 10359 10388 x x x x
10343 TrEx 1.4ft 8800/840 DIS 10361 10389 10418 10438 10447 10453
10346 TrEx 1.5ft 8000/840 DIS 10362 10392 x x x x
10347 TrEx 1.5ft 11000/840 DIS 10363 10398 10422 10442 10449 10455
10348 TrEx 2.2ft 6400/840 DIS 10366 10399 x x x x
10349 TrEx 2.2ft 8800/840 DIS 10367 10402 x x x x
10351 TrEx 2.4ft 12800/840 DIS 10368 10404 x x x x
10352 TrEx 2.4ft 17600/840 DIS 10369 10405 x x x x
10353 TrEx 2.5ft 16000/840 DIS 10372 10406 x x x x
10356 TrEx 2.5ft 22000/840 DIS 10378 10407 x x x x

TrEx Light fitting without disconnector

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

10219 TrEx 1.2ft 3200/840 10237 10253 x x x x
10222 TrEx 1.2ft 4400/840 10238 10256 10289 10298 10318 10334
10224 TrEx 1.4ft 6400/840 10239 10257 x x x x
10225 TrEx 1.4ft 8800/840 10241 10258 10294 10302 10322 10336
10226 TrEx 1.5ft 8000/840 10242 10259 x x x x
10227 TrEx 1.5ft 11000/840 10243 10262 10296 10309 10329 10338
10228 TrEx 2.2ft 6400/840 10246 10268 x x x x
10229 TrEx 2.2ft 8800/840 10247 10269 x x x x
10231 TrEx 2.4ft 12800/840 10248 10272 x x x x
10232 TrEx 2.4ft 17600/840 10249 10278 x x x x
10233 TrEx 2.5ft 16000/840 10251 10279 x x x x
10236 TrEx 2.5ft 22000/840 10252 10282 x x x x

TrEx DIS INOX Light fitting with disconnector, body steel sheet grade AISI 304

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

10519 TrEx 1.2ft 3200/840 DIS INOX 10537 10572 x x x x
10521 TrEx 1.2ft 4400/840 DIS INOX 10538 10574 10602 10616 10623 10632
10522 TrEx 1.4ft 6400/840 DIS INOX 10539 10575 x x x x
10523 TrEx 1.4ft 8800/840 DIS INOX 10542 10576 10609 10618 10627 10636
10526 TrEx 1.5ft 8000/840 DIS INOX 10548 10577 x x x x
10527 TrEx 1.5ft 11000/840 DIS INOX 10549 10578 10614 10621 10629 10638
10528 TrEx 2.2ft 6400/840 DIS INOX 10552 10579 x x x x
10529 TrEx 2.2ft 8800/840 DIS INOX 10558 10582 x x x x
10531 TrEx 2.4ft 12800/840 DIS INOX 10559 10588 x x x x
10532 TrEx 2.4ft 17600/840 DIS INOX 10562 10589 x x x x
10533 TrEx 2.5ft 16000/840 DIS INOX 10568 10592 x x x x
10536 TrEx 2.5ft 22000/840 DIS INOX 10569 10598 x x x x

TrEx INOX Light fitting without disconnector, body steel sheet grade AISI 304

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

10456 TrEx 1.2ft 3200/840 INOX 10468 10480 x x x x
10457 TrEx 1.2ft 4400/840 INOX 10469 10481 10493 10499 10505 10512
10458 TrEx 1.4ft 6400/840 INOX 10470 10482 x x x x
10459 TrEx 1.4ft 8800/840 INOX 10471 10483 10495 10501 10507 10516
10460 TrEx 1.5ft 8000/840 INOX 10472 10484 x x x x
10461 TrEx 1.5ft 11000/840 INOX 10473 10485 10497 10503 10509 10518
10462 TrEx 2.2ft 6400/840 INOX 10474 10486 x x x x
10463 TrEx 2.2ft 8800/840 INOX 10475 10487 x x x x
10464 TrEx 2.4ft 12800/840 INOX 10476 10488 x x x x
10465 TrEx 2.4ft 17600/840 INOX 10477 10489 x x x x
10466 TrEx 2.5ft 16000/840 INOX 10478 10490 x x x x
10467 TrEx 2.5ft 22000/840 INOX 10479 10491 x x x x

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DIS – light fitting with disconnector
3F 3-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination
3F Mxh 3-phase 5 core through-wiring in the luminaire
(L3 used for emergency unit unswitched power supply)

194
 TrEx

CERTIFICATION
TÜV CY 21 ATEX 0206562X - TrEx, TrEx Mxh Identification Classification of spaces
Directive Standards of external
influences Identification Establishment regulation
EN 60079-0:2012 + A11:2013
EN IEC 60079-0:2018 EN 60079-17
Hazard
EN 60079-1:2014 of explosion BE3N1 ZONE 21, 22 EN 60079-14
2014/34/EU ATEX EN 60079-7:2015 of flammable dust
EN 60079-10-2
EN 60079-18:2015
EN 60079-28:2015 Hazard EN 60079-10-1
EN 60079-31:2014 of explosion
BE3N2 ZONE 1, 2 EN 60079-14
of flammable
EN 60598-1:2015
gases and vapours EN 60079-17
EN 60598-2-1:89
EN 62471:2008
General EN 55015:2013
2014/35/EU requirements
and standards EN 60598-2-22:2014
EN 61547:2009
EN 61000-3-2:14
EN 61000-3-3:13
2011/65/EN RoHS EN 50581:2012

AR19ATEX131U - Ex battery box HM4Ah

Directive Standards
EN IEC 60079-0:2018
2014/34/EU ATEX
EN 60079-1:2014

TÜV CY 20 ATEX 0206368 U - Ex disconnector OT 2A-2C Ex d

Directive Standards
EN IEC 60079-0:2018
2014/34/EU ATEX
EN 60079-1:2014

LIGHT FITTING ATTACHMENT

a) Suspension eyes 2 × M6 - in standard model d) Adjustable side suspensions on the wall
b) Holders directly on the ceiling e) Recessed frame for false ceiling
c) Side suspensions on the wall f) Holders on tube structures

LIGHT FITTING DETAILED VIEW

TrEx

CZECH LIGHT FITTINGS 195

 TrEx accessories

Ceiling suspension
Serves for hanging the light fitting on the ceiling.

Weight
Code Type Description
[kg]
62694 TrEx suspension 3 Metal holder for direct suspending on the ceiling. 0,6
Holder - 2 pcs, screw M6 × 16 - 4 pcs assembly.
62695 TrEx suspension 3 Stainless-steel holder for direct suspending on the ceiling. 0,6
INOX Holder - 2 pcs, screw M6 × 16 - 4 pcs for assembling.

Side suspension
Serves for firm fixation of the light fitting on the wall.

Weight
Code Type Description
[kg]
62690 TrEx suspension 1 Metal holder for direct suspension on the wall. 1,4
Holder - 2 pcs, screw M6 × 16 - 4 pcs for assembling
62691 TrEx suspension 1 Stainless-steel holder for direct suspension on the wall. 1,4
INOX Holder - 2 pcs, screw M6 × 16 - 4 pcs for assembling

Adjustable side suspension

Serves for hanging the light fitting on the wall, ceiling, sloped surfaces, and enables positioning the light fitting from 0 to 90°, with a step of 15°.

Weight
Code Type Description
[kg]
62692 TrEx suspension 2 Metal holder for direct suspending on the wall or ceiling. 1,5
Holder - 2 pcs, screw M6 × 16 - 8 pcs for assembling.
62693 TrEx suspension 2 Stainless-steel holder for direct suspending on the wall and 1,5
INOX ceiling. Holder - 2 pcs, screw M6 × 16 - 8 pcs for assembling.

Pipeline holder
Serves for suspending the light fitting to tube structures with a diameter of ¾“ – 2“ by means of pipeline clamps.

Weight
Code Type Description
[kg]
62696 TrEx holder Metal holder for direct suspending on the tube structures. 0,8
Holder - 2 pcs, screw M6 × 16 - 4 pcs, nut M8 - 4 pcs, washer 8.2
- 4 pcs, pipeline clamp ETR M8 - 2 pcs for assembling.
62697 TrEx holder Stainless-steel holder for direct suspending to tube structures. 0,8
INOX Holder - 2 pcs, screw M6 × 16 - 4 pcs, nut M8 - 4 pcs, washer 8.2
- 4 pcs, pipeline clamp ETR M8 - 2 pcs for assembling.

Recessed frame for false ceiling

Serves for fixing the light fitting into the false ceiling by means of a recessed frame and modified customize body. For ceiling thickness 0-24 mm.

Type Description

TrEx fixture body with a frame Raster ceiling mounted fixture body, frame, screw M6 × 16 - 4 pcs, screw
M6 × 60 - 4 pcs, washer 6,2 - 4 pcs, suspension M6 for plasterboard
- 4 pcs for assembling.

Please, contact our sales representative to order a raster ceiling mounted fixture body with a frame.

196
CZECH LIGHT FITTINGS 197
PERUN SLIM

INDUSTRIAL
STAINLESS
DUSTPROOF
WATERPROOF
 PRODUCT OVERVIEW

PERUN SLIM – industrial metal LED light fitting

PERUN SLIM
page 200

IP65 PERUN SLIM

page 200

CZECH LIGHT FITTINGS 199

 PERUN SLIM

… stainless, dustproof, waterproof.

USE ADVANTAGES
The light fitting is suitable for industrial indoor •L  ight fitting protection IP65 • In DALI version possibility of constant luminous
and outdoor roofed spaces, warehouses, ga- • Maximum ambient temperature up to ta = 35 °C flux for whole lifetime (CLO)
rages, workshops, sports areas, transport ter- • Lifetime: 50,000 hours / L90B10 • Constant luminous flux even in ambient tem-
minals, utility structures, agricultural operations • High chemical and mechanical robustness IK10 perature of -25 °C
and laboratories without a danger of explosion of • Diffuser: polished thermally toughened safety •S  tandard model - CRI > 80: 4000 K
gas, dust and combustible fumes. glass •A  t request CRI > 80: 3000 K, 5000 K, 6500 K,
• Body: stainless sheet CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
The light fitting is resistant to deformation, dust, • Up to 45 % lower electricity consumption when
spouting water and have increased chemical re- compared to tubes T5
sistance. • It can be delivered in dimmable or permanent
emergency version M1h and M3hAt
Characteristics of the used tempered glass and
its shattering power are controlled by the ČSN
EN 12150-1 standard. For applications where
spontaneous fracture means a higher safety
risk, we recommend to use the version with the
safety film (SF).
up to up to
LED
35ºC -25ºC

CRI
220-240 V DALI L 90
>80 B 10

200
 PERUN SLIM

PERUN SLIM
TECHNICAL DESCRIPTION
• Light fitting protection: IP65 • Body: stainless sheet, impact-resistant, chemi-
• Maximum ambient temperature: ta = 35  °C, cally resistant
Maximum ambient temperature: ta = 0-25 °C •R  eflector: steel sheet, white colour (RAL 9003)
with a back-up power supply M1h, M3hAt •C  lips: stainless
• Maximum system efficacy: 138 lm/W •S  ealing: silicone, at light fitting body
• The watt and lumen values can vary by ± 7,5 % • Cable glands: PG 13.5 brass with surface treat-
• Standard model - CRI > 80: 4000 K ment
• MacAdam = 3 SDCM • Terminal block: screwless, three-pole (basic
• Lifetime: 50,000 hours / L90B10 version)
• Diffuser: polished thermally toughened safety • The package includes: stainless hooks and
glass, shock-resistant, chemically resistant stainless brackets
• Possibility of delivery of the diffuser with a safe- • Electric equipment: LED modules, current driv-
ty foil (SF) er or current driver DALI
• Possibility of delivery of an EM kit M1h with bat-
tery autotesting

PERUN SLIM 1.4ft

150° 180° 150°
A
D 120 120° 120°

25
90° 90°

67
C0 60° 60°

C90
30° 0° 30°

Luminous flux Luminous flux Power System Net

A D
Code Type of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[lm] [lm] [W] [lm/W] [kg]
Body: stainless sheet - diffuser: polished thermally toughened safety glass
86710 PERUN SLIM 1.2ft 1300/840 1320 1060 8 133 2,4 680 360
86720 PERUN SLIM 1.2ft 1600/840 1580 1260 10 126 2,4 680 360
86730 PERUN SLIM 1.2ft 2200/840 2200 1760 14 126 2,4 680 360
86740 PERUN SLIM 1.4ft 2600/840 2580 2060 16 129 4,3 1290 850
86750 PERUN SLIM 1.4ft 3200/840 3110 2490 20 125 4,3 1290 850
86760 PERUN SLIM 1.4ft 4400/840 4350 3480 27 129 4,3 1290 850
86770 PERUN SLIM 1.4ft 6400/840 6260 5010 38 132 4,3 1290 850
86780 PERUN SLIM 1.5ft 3250/840 3240 2590 20 130 5,3 1600 1050
86790 PERUN SLIM 1.5ft 4000/840 3880 3100 24 129 5,3 1600 1050
86800 PERUN SLIM 1.5ft 5500/840 5420 4340 33 132 5,3 1600 1050
86810 PERUN SLIM 1.5ft 8000/840 7740 6190 45 138 5,3 1600 1050

86720 PERUN SLIM 1.2ft 1600/840 = suitable replacement for T8 fl. tube light fitting PERUN 118 – 1 × 18 W
86750 PERUN SLIM 1.4ft 3200/840 = suitable replacement for T8 fl. tube light fitting PERUN 136 – 1 × 36 W
86770 PERUN SLIM 1.4ft 6400/840 = suitable replacement for T8 fl. tube light fitting PERUN 236 – 2 × 36 W
86790 PERUN SLIM 1.5ft 4000/840 = suitable replacement for T8 fl. tube light fitting PERUN 158 – 1 × 58 W
86810 PERUN SLIM 1.5ft 8000/840 = suitable replacement for T8 fl. tube light fitting PERUN 258 – 2 × 58 W

PERUN SLIM Non-dimmable driver, diffuser: polished thermally toughened safety glass

Code Type 1F 3F M1h M3hAt 3F M1h 3F M3hAt

86710 PERUN SLIM 1.2ft 1300/840 86711 86713 x x x x
86720 PERUN SLIM 1.2ft 1600/840 86721 86723 x x x x
86730 PERUN SLIM 1.2ft 2200/840 86731 86733 x x x x
86740 PERUN SLIM 1.4ft 2600/840 86741 86743 86744 86745 86746 86747
86750 PERUN SLIM 1.4ft 3200/840 86751 86753 86754 86755 86756 86757
86760 PERUN SLIM 1.4ft 4400/840 86761 86763 86764 86765 86766 86767
86770 PERUN SLIM 1.4ft 6400/840 86771 86773 x x x x
86780 PERUN SLIM 1.5ft 3250/840 86781 86783 86784 86785 86786 86787
86790 PERUN SLIM 1.5ft 4000/840 86791 86793 86794 86795 86796 86797
86800 PERUN SLIM 1.5ft 5500/840 86801 86803 86804 86805 86806 86807
86810 PERUN SLIM 1.5ft 8000/840 86811 86813 x x x x

PERUN SLIM DALI Digital dimmable driver DALI, diffuser: polished thermally toughened safety glass

Code Type 1F 3F M1h M3hAt 3F M1h 3F M3hAt

86820 PERUN SLIM 1.2ft 1300/840 DALI 86821 x x x x x
86830 PERUN SLIM 1.2ft 1600/840 DALI 86831 x x x x x
86840 PERUN SLIM 1.2ft 2200/840 DALI 86841 x x x x x
86850 PERUN SLIM 1.4ft 2600/840 DALI 86851 86853 86854 86855 86856 86857
86860 PERUN SLIM 1.4ft 3200/840 DALI 86861 86863 86864 86865 86866 86867
86870 PERUN SLIM 1.4ft 4400/840 DALI 86871 86873 86874 86875 86876 86877
86880 PERUN SLIM 1.4ft 6400/840 DALI 86881 86883 x x x x
86890 PERUN SLIM 1.5ft 3250/840 DALI 86891 86893 86894 86895 86896 86897
86900 PERUN SLIM 1.5ft 4000/840 DALI 86901 86903 86904 86905 86906 86907
86910 PERUN SLIM 1.5ft 5500/840 DALI 86911 86913 86914 86915 86916 86917
86920 PERUN SLIM 1.5ft 8000/840 DALI 86921 86923 x x x x

Example of type marking: 86916 = PERUN SLIM 1.5ft 5500/840 3F M1h

CZECH LIGHT FITTINGS 201

 PERUN SLIM

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks

LIGHT FITTING DETAILED VIEW

PERUN SLIM

202
 PERUN HORTI

CZECH LIGHT FITTINGS 203

ALUMAX LED

INDUSTRIAL
DUSTPROOF
WATERPROOF
ALUMINIUM PROFILE
 PRODUCT OVERVIEW

ALUMAX LED – industrial metal LED light fitting

ALUMAX LED
page 206

IP66 ALUMAX LED

page 206

ALUMAX LED FOR

EXTREME TEMPERATURES
page 209

IP66 ALUMAX LED MAX

page 209

ALUMAX LED
ACCESSORIES
page 212

ALUMAX LED
ACCESSORIES
page 212

CZECH LIGHT FITTINGS 205

 ALUMAX LED

… aluminium, dustproof, waterproof, chemically resistant.

USE ADVANTAGES
The light fitting is suitable for industrial indoor •L  ight fitting protection IP66 • Constant luminous flux even in ambient tem-
and outdoor roofed spaces, warehouses, ga- • Maximum ambient temperature up to ta = 35 °C perature of -25 °C
rages, workshops, sports areas, transport ter- • Lifetime: 50,000 hours / L90B10 •S  tandard model - CRI > 80: 4000 K
minals, utility structures, agricultural operations • Diffuser: tempered glass with high mechanical •A  t request CRI > 80: 3000 K, 6500 K
and laboratories without a danger of explosion of resistance • It can be delivered in dimmable or emergency
gas, dust and combustible fumes. • Body: grey aluminium profile, surface treated version
with powder-coated colour •C  ertification: ENEC, CB
The light fitting is resistant to deformation, dust, • Up to 45 % lower electricity consumption when
spouting water and chemically aggressive envi- compared to tubes T5
ronment. • In DALI version possibility of constant luminous
flux for whole lifetime (CLO)
Characteristics of the used tempered glass and
its shattering power are controlled by the ČSN
EN 12150-1 standard.

up to up to
LED
35ºC -25ºC

CRI
220-240 V DALI L 90
>80 B 10

206
 ALUMAX LED

ALUMAX LED
TECHNICAL DESCRIPTION
• Light fitting protection: IP66 •C  lips: stainless
• Maximum ambient temperature: ta = 35  °C, •S  ealing: polyurethane (PUR) in body groove
Maximum ambient temperature: ta = 0-25 °C • Side covers: grey aluminium alloy with plastic
with a back-up power supply M1h, M3h side plates for fixation and suspension of glass
• Maximum system efficacy: 128 lm/W at assembly, surface treated with powder-coat-
• The watt and lumen values can vary by ± 7,5 % ed colour
• Standard model - CRI > 80: 4000 K • Terminal block: screwless, three-pole (basic
• MacAdam = 3 SDCM version)
• Lifetime: 50,000 hours / L90B10 •C  able glands: brass M18 × 1,5
• Diffuser: tempered glass • Installation: package contains stainless sheet
• Body: grey aluminium profile, surface treated suspension brackets and FeZn sliding hangers
with powder-coated colour • Electric equipment: LED modules, current driv-
• Reflector: steel sheet, white colour (RAL 9003) er or current driver DALI

ALUMAX LED 1.5ft ALUMAX LED 2.5ft

150° 180° 150° 150° 180° 150°

A
D 105 120° 120° 120° 120°

90° 90° 90° 90°

75
60° 60°
C0 60° 60°

C90
30° 0° 30° 30° 0° 30°

Luminous flux Luminous flux Power System Net

A D
Code Type of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[lm] [lm] [W] [lm/W] [kg]
Diffuser made of tempered glass
50410 ALUMAX LED 1.2ft 1300/840 1320 1000 8 125 2,2 624 534
50420 ALUMAX LED 1.2ft 1600/840 1580 1200 10 120 2,2 624 534
50430 ALUMAX LED 1.2ft 2200/840 2200 1670 14 119 2,2 624 534
50440 ALUMAX LED 1.4ft 2600/840 2580 1960 16 123 4,2 1224 1134
50450 ALUMAX LED 1.4ft 3200/840 3110 2360 20 118 4,2 1224 1134
50460 ALUMAX LED 1.4ft 4400/840 4350 3310 27 123 4,2 1224 1134
50470 ALUMAX LED 1.5ft 3250/840 3240 2460 20 123 5,0 1524 1434
50480 ALUMAX LED 1.5ft 4000/840 3880 2950 24 123 5,0 1524 1434
50490 ALUMAX LED 1.5ft 5500/840 5420 4120 33 125 5,0 1524 1434

50510 ALUMAX LED 2.2ft 2600/840 2630 1970 16 123 2,4 624 534
50520 ALUMAX LED 2.2ft 3200/840 3110 2330 19 123 2,4 624 534
50530 ALUMAX LED 2.2ft 4400/840 4390 3290 27 122 2,4 624 534
50540 ALUMAX LED 2.4ft 5200/840 5150 3860 31 125 4,3 1224 1134
50550 ALUMAX LED 2.4ft 6400/840 6260 4700 37 127 4,3 1224 1134
50560 ALUMAX LED 2.4ft 8800/840 8710 6530 51 128 4,3 1224 1134
50570 ALUMAX LED 2.5ft 6500/840 6380 4790 38 126 5,3 1524 1434
50580 ALUMAX LED 2.5ft 8000/840 7750 5810 46 126 5,3 1524 1434
50590 ALUMAX LED 2.5ft 11000/840 12050 9040 71 127 5,3 1524 1434

50450 ALUMAX LED 1.4ft 3200/840 = suitable replacement for ALUMAX 136 E – 1 × 36 W
50480 ALUMAX LED 1.5ft 4000/840 = suitable replacement for ALUMAX 158 E – 1 × 58 W
50550 ALUMAX LED 2.4ft 6400/840 = suitable replacement for ALUMAX 236 E – 2 × 36 W
50580 ALUMAX LED 2.5ft 8000/840 = suitable replacement for ALUMAX 258 E – 2 × 58 W

ALUMAX LED Diffuser made of tempered glass, stainless clips

Code Type 1F 3F M1h M3h 3F M1h 3F M3h

50410 ALUMAX LED 1.2ft 1300/840 x x 50414 x x x
50420 ALUMAX LED 1.2ft 1600/840 x x 50424 x x x
50430 ALUMAX LED 1.2ft 2200/840 x x 50434 x x x
50440 ALUMAX LED 1.4ft 2600/840 50441 50443 50444 50445 50447 50448
50450 ALUMAX LED 1.4ft 3200/840 50451 50453 50454 50455 50457 50458
50460 ALUMAX LED 1.4ft 4400/840 50461 50463 50464 50465 50467 50468
50470 ALUMAX LED 1.5ft 3250/840 50471 50473 50474 50475 50477 50478
50480 ALUMAX LED 1.5ft 4000/840 50481 50483 50484 50485 50487 50488
50490 ALUMAX LED 1.5ft 5500/840 50491 50493 50494 50495 50497 50498
50510 ALUMAX LED 2.2ft 2600/840 x x 50514 x x x
50520 ALUMAX LED 2.2ft 3200/840 x x 50524 x x x
50530 ALUMAX LED 2.2ft 4400/840 x x 50534 x x x
50540 ALUMAX LED 2.4ft 5200/840 50541 50543 50544 50545 50547 50548
50550 ALUMAX LED 2.4ft 6400/840 50551 50553 50554 50555 50557 50558
50560 ALUMAX LED 2.4ft 8800/840 50561 50563 x x x x
50570 ALUMAX LED 2.5ft 6500/840 50571 50573 50574 50575 50577 50578
50580 ALUMAX LED 2.5ft 8000/840 50581 50583 50584 50585 50587 50588
50590 ALUMAX LED 2.5ft 11000/840 50591 50593 x x x x

Example of type marking: 50555 = ALUMAX LED 2.4ft 6400/840 M3h

CZECH LIGHT FITTINGS 207

 ALUMAX LED

ALUMAX LED DALI Digital dimmable driver DALI, diffuser made of tempered glass, stainless clips

Code Type 3F M1h M3h 3F M1h 3F M3h

50610 ALUMAX LED 1.2ft 1300/840 DALI x 50614 x x x
50620 ALUMAX LED 1.2ft 1600/840 DALI x 50624 x x x
50630 ALUMAX LED 1.2ft 2200/840 DALI x 50634 x x x
50640 ALUMAX LED 1.4ft 2600/840 DALI 50643 50644 50645 50647 50648
50650 ALUMAX LED 1.4ft 3200/840 DALI 50653 50654 50655 50657 50658
50660 ALUMAX LED 1.4ft 4400/840 DALI 50663 50664 50665 50667 50668
50670 ALUMAX LED 1.5ft 3250/840 DALI 50673 50674 50675 50677 50678
50680 ALUMAX LED 1.5ft 4000/840 DALI 50683 50684 50685 50687 50688
50690 ALUMAX LED 1.5ft 5500/840 DALI 50693 50694 50695 50697 50698
50710 ALUMAX LED 2.2ft 2600/840 DALI x x x x x
50720 ALUMAX LED 2.2ft 3200/840 DALI x x x x x
50730 ALUMAX LED 2.2ft 4400/840 DALI x x x x x
50740 ALUMAX LED 2.4ft 5200/840 DALI 50743 50744 50745 50747 50748
50750 ALUMAX LED 2.4ft 6400/840 DALI 50753 50754 50755 50757 50758
50760 ALUMAX LED 2.4ft 8800/840 DALI 50763 x x x x
50770 ALUMAX LED 2.5ft 6500/840 DALI 50773 50774 50775 50777 50778
50780 ALUMAX LED 2.5ft 8000/840 DALI 50783 50784 50785 50787 50788
50790 ALUMAX LED 2.5ft 11000/840 DALI 50793 x x x x
Example of type marking: 50694 = ALUMAX LED 1.5ft 5500/840 DALI M1h

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) To a ceiling or a wall with the use of FeZn sliding hangers in body groove
c) Attachment with the use of side hangers to the wall

LIGHT FITTING DETAILED VIEW

ALUMAX LED

208
ALUMAX LED MAX

… f or extreme temperatures -40 °C to +75 °C.

USE ADVANTAGES
The light fitting is suitable for indoor and outdoor • Light fitting protection IP66 • Up to 45 % lower electricity consumption when
spaces with roof with extreme ambient tempera- • Minimum ambient temperature up to ta = -40 °C compared to tubes T5
tures from (-40 °C to +75 °C). The light fitting is • Maximum ambient temperature up to ta = 75 °C • Constant luminous flux even in ambient tem-
destined mainly for heating stations, metallurgi- • Lifetime: 50,000 hours / L80B10 perature of -40 °C
cal lines, glass-works, as well as for freezers, • Possibility of using in even higher ambient •S  tandard model - CRI > 80: 4000 K
cooling plants and other premises without dan- temperatures under the condition of a short- •A  t request CRI > 80: 3000 K, 5000 K
ger of explosion of gases, dusts and flammable ened service life of the light fitting – param-
vapors. eters solved within a particular project
• Diffuser: tempered glass with high mechanical
The light fitting is resistant to deformation, dust, resistance
spouting water and chemically aggressive envi- • Body: grey aluminium profile, surface treated
ronment. with powder-coated colour

Characteristics of the used tempered glass and

its shattering power are controlled by the ČSN
EN 12150-1 standard.

up to up to
LED
75ºC -40ºC

CRI
220-240 V L 80
>80 B 10

CZECH LIGHT FITTINGS 209

 ALUMAX LED MAX

ALUMAX LED MAX

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 •R  eflector: steel sheet, white colour (RAL 9003)
• Minimum ambient temperature: ta = -40 °C • Ventilation plug: type BVPB-01 made of brass,
• Maximum ambient temperature: ta = 75 °C size M12 × 1,5
• Lifetime: 50,000 hours / L80B10 • Side covers: grey aluminium alloy with plastic
• Possibility of using in even higher ambient tem- side plates for fixation and suspension of glass
peratures under the condition of a shortened at assembly, surface treated with powder-coat-
service life of the light fitting – parameters ed colour
solved within a particular project •C  lips: stainless
• Maximum system efficacy: 128 lm/W •S  ealing: polyurethane (PUR) in body groove
• The watt and lumen values can vary by ± 7,5 % • Terminal block: screwless, three-pole (basic
• Standard model - CRI > 80: 4000 K version)
• MacAdam = 3 SDCM •C  able glands: brass M18 × 1,5
• Diffuser: tempered glass • Installation: package contains stainless sheet
• Body: grey aluminium profile, surface treated suspension brackets and FeZn sliding hangers
with powder-coated colour • Electric equipment: LED modules, current
driver

ALUMAX LED MAX 1.5ft ALUMAX LED MAX 2.5ft

150° 180° 150° 150° 180° 150°

A
D 105 120° 120° 120° 120°

90° 90° 90° 90°

75
60° 60°
C0 60° 60°

C90
30° 0° 30° 30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Code Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature up to ta = 75 °C - body: aluminum profile - diffuser: thermally toughened glass
79730 ALUMAX LED 1.5ft MAX 4000/840 75 3880 2950 24 123 5,0 1524 1434
79700 ALUMAX LED 1.5ft MAX 5500/840 70 5420 4120 33 125 5,0 1524 1434
79740 ALUMAX LED 2.4ft MAX 6400/840 70 6260 4700 37 127 4,3 1224 1134
79710 ALUMAX LED 2.4ft MAX 8800/840 65 8710 6530 51 128 4,3 1224 1134
79750 ALUMAX LED 2.5ft MAX 8000/840 70 7750 5810 46 126 5,3 1524 1434
79720 ALUMAX LED 2.5ft MAX 11000/840 65 12050 9040 71 127 5,3 1524 1434

ALUMAX LED MAX Diffuser: polished thermally toughened glass, stainless clips

Code Type 1F 3F M1h M3h DALI DALI 3F

79730 ALUMAX LED 1.5ft MAX 4000/840 79731 79733 x x 79735 79736
79700 ALUMAX LED 1.5ft MAX 5500/840 79701 79703 x x 79705 79706
79740 ALUMAX LED 2.4ft MAX 6400/840 79741 79743 x x 79745 79746
79710 ALUMAX LED 2.4ft MAX 8800/840 79711 79713 x x 79715 79716
79750 ALUMAX LED 2.5ft MAX 8000/840 79751 79753 x x 79755 79756
79720 ALUMAX LED 2.5ft MAX 11000/840 79721 79723 x x 79725 79726

Example of type marking: 79713 = ALUMAX LED MAX 2.4ft 8800/840 3F

LEGEND
DALI – version with digital dimmable driver DALI
1F – 1 phase wiring cables for through-wiring
3F – 3 phase wiring cables for through-wiring

210
 ALUMAX LED MAX

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) To a ceiling or a wall with the use of FeZn sliding hangers in body groove
c) Attachment with the use of side hangers to the wall

LIGHT FITTING DETAILED VIEW

ALUMAX LED MAX

CZECH LIGHT FITTINGS 211

 ALUMAX LED accessories

BZ – side hanger
It serves to attach the light fitting to the wall with the possibility of its positioning.

Weight
Code Type Description
[kg]
90002 BZ side hanger with blocking (set for 1 light fitting) 0,4

212
 XXXXXXXX

CZECH LIGHT FITTINGS 213

CANOPUS

INDUSTRIAL
METAL
FOR HIGH CEILINGS
 PRODUCT OVERVIEW

CANOPUS – industrial metal LED light fitting

CANOPUS
page 216

IP65 CANOPUS CANOPUS NB CANOPUS NB TR

page 217 page 219 page 221

CANOPUS HE
page 223

IP65 CANOPUS HE
page 223

CANOPUS MAX
page 226

IP65 CANOPUS MAX CANOPUS MAX NB CANOPUS MAX NB TR

page 227 page 229 page 231

CANOPUS
ACCESSORIES
page 233

CANOPUS
ACCESSORIES
page 233

CZECH LIGHT FITTINGS 215

 CANOPUS

… dustproof, waterproof, for high ceilings.

USE ADVANTAGES
The light fitting is suitable for large operations • Light fitting protection IP65 • In DALI version possibility of constant luminous
with high ceilings, industrial outdoor and indoor • Maximum ambient temperature up to ta = 35 °C flux for whole lifetime (CLO)
roofed spaces, warehouses, workshops, sports • Lifetime: 50,000 hours / L90B50 • Constant luminous flux even in ambient tem-
areas, transport terminals and utility structures • High mechanical robustness IK10 perature of -25 °C
without a danger of explosion of gas, dust and • Diffuser: satinized or transparent tempered •S  tandard model - CRI > 80: 4000 K
combustible fumes. safety glass •A  t request CRI > 80: 3000 K, 5000 K, 6500 K,
• Body: steel sheet - white colour (RAL 9003), or CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
The light fitting is resistant to deformation, dust inox AISI 304 at request • Easy installation with the help of supply con-
and splashing water. • Up to 45 % lower electricity consumption when nector with cable 0,4 m CYSY 3 × 1.5, without
compared to tubes T5 necessity of opening the light fitting
Characteristics of the used tempered glass and • Possibility of delivery either in a deemed or •C  ertification: ESČ, ENEC, CB, BALL-PROOF
its shattering power are controlled by the ČSN permanently emergency design M1hAt and
EN 12150-1 standard. For applications where M3hAt
spontaneous fracture means a higher safety
risk, we recommend to use the version with the
safety film (SF).

up to up to
LED
35ºC -25ºC

CRI
220-240 V DALI
>80

216
 CANOPUS

CANOPUS
TECHNICAL DESCRIPTION
• Light fitting protection: IP65 • Body: steel sheet, white colour (RAL 9003), or
• Maximum ambient temperature: ta = 0-35 °C inox AISI 304 at request
and for the design with a back-up power supply • Ventilation plug: type BVPB-01 made of polyam-
M1hAt, M3hAt ide, size M12 × 1.5
• Maximum system efficacy: 144 lm/W •S  ealing: EPDM attached to light fitting body
• The watt and lumen values can vary by ± 7,5 % • Terminal block: interconnecting connector,
• Standard model - CRI > 80: 4000 K 0.4 m cable
• MacAdam = 3 SDCM • Installation: all versions delivered including
• Lifetime: 50,000 hours / L90B50 suspension lugs (4 pcs)
• Diffuser: satinized tempered safety glass • Electric equipment: LED modules, current driv-
• Possibility of delivery of the diffuser with a safe- er or current driver DALI (2 – 3 pcs depending
ty foil (SF) on type)
• EM kit with battery autotesting for M1hAt
and M3hAt

CANOPUS CANOPUS MxhAt

CANOPUS
150° 180° 150°
90

120° 120°

90° 90°
650 800
450 450 150 60° 60°

30° 0° 30°
60

60
... MxhAt
150° 180° 150°

120° 120°

90° 90°
450

450

60° 60°
650

30° 0° 30°

C0
C90

350 462

Luminous flux Luminous flux Power System Net

Code Type of LED modules of light fitting consumption efficacy weight
[lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 35 °C - body: steel sheet, white colour - diffuser: satinized tempered safety glass
74010 CANOPUS 22000/840 22000 18040 125 144 11,6
74020 CANOPUS 26000/840 26000 21320 157 135 11,8
74030 CANOPUS 30000/840 30000 24600 183 134 11,8

Autonomy Emergency Power

Net
light flux in standby Battery
Type weight
of light fitting mode type
[kg]
[hrs] [lm] [W]
EM kit for permanent emergency lighting with battery autotesting - diffuser: satinized tempered safety glass
... M1hAt 1 440 1,5 LiFePO4 +4,2
... M3hAt 3 440 1,5 LiFePO4 +4,4

CANOPUS
Code Type M1hAt M3hAt DALI DALI M1hAt DALI M3hAt
74010 CANOPUS 22000/840 74011 74013 74016 74017 74018
74020 CANOPUS 26000/840 74021 74023 74026 74027 74028
74030 CANOPUS 30000/840 74031 74033 74036 74037 74038

Example of type marking: 74036 = CANOPUS 30000/840 DALI

LEGEND
DALI – version with digital dimmable driver DALI (2 – 3 pcs)
M1hAt – emergency back-up source with operating time of 1 hour (SA) for permanent illumination with battery autotesting
M3hAt – emergency back-up source with operating time of 3 hours (SA) for permanent illumination with battery autotesting
Batteries must be formatted before their putting into operation. Assembly instructions must be observed at installation.

CZECH LIGHT FITTINGS 217

 CANOPUS

LIGHT FITTING ATTACHMENT

a) With help of suspension eyes of M6
b) With help of a holder directly to the ceiling
c) With the help of adjustable holder directly on the ceiling or on the wall
d) With help of a chain hinge

LIGHT FITTING DETAILED VIEW

LIGHT FITTING DETAILED VIEW WITH AN EMERGENCY MODULE

218
 CANOPUS NB

CANOPUS NB
TECHNICAL DESCRIPTION
• Light fitting protection: IP65 • Reflector: parabolic polished aluminium with nar-
• Maximum ambient temperature: ta = 0-35 °C row emitting characteristics (NB - narrow beam)
and for the design with a back-up power supply • Body: steel sheet, white colour (RAL 9003), or
M1hAt, M3hAt inox AISI 304 at request
• Maximum system efficacy: 146 lm/W • Ventilation plug: type BVPB-01 made of polyam-
• The watt and lumen values can vary by ± 7,5 % ide, size M12 × 1.5
• Standard model - CRI > 80: 4000 K •S  ealing: EPDM attached to light fitting body
• MacAdam = 3 SDCM • Terminal block: interconnecting connector,
• Lifetime: 50,000 hours / L90B50 0.4 m cable
• Diffuser: satinized tempered safety glass • Installation: all versions delivered including
• Possibility of delivery of the diffuser with a safe- suspension lugs (4 pcs)
ty foil (SF) • Electric equipment: LED modules, current driv-
• EM kit with battery autotesting for M1hAt er or current driver DALI (2 – 3 pcs depending
and M3hAt on type)

CANOPUS NB CANOPUS NB MxhAt

CANOPUS NB
150° 180° 150°
90

120° 120°

90° 90°

650 800
450 450 150 60° 60°

30° 0° 30°
60

60
... MxhAt
150° 180° 150°

120° 120°

90° 90°
450

450
650

60° 60°

30° 0° 30°

C0
C90
350 462

Luminous flux Luminous flux Power System Net

Code Type of LED modules of light fitting consumption efficacy weight
[lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 35 °C - body: steel sheet, white colour - diffuser: satinized tempered safety glass with parabolic reflector
74110 CANOPUS NB 22000/840 22000 18260 125 146 12,3
74120 CANOPUS NB 26000/840 26000 21580 157 137 12,5
74130 CANOPUS NB 30000/840 30000 24900 183 136 12,5

Autonomy Emergency Power

Net
light flux in standby Battery
Type weight
of light fitting mode type
[kg]
[hrs] [lm] [W]
EM kit for permanent emergency lighting with battery autotesting - diffuser: satinized tempered safety glass
... M1hAt 1 440 1,5 LiFePO4 +4,2
... M3hAt 3 440 1,5 LiFePO4 +4,4

CANOPUS NB
Code Type M1hAt M3hAt DALI DALI M1hAt DALI M3hAt
74110 CANOPUS NB 22000/840 74111 74113 74116 74117 74118
74120 CANOPUS NB 26000/840 74121 74123 74126 74127 74128
74130 CANOPUS NB 30000/840 74131 74133 74136 74137 74138

Example of type marking: 74136 = CANOPUS NB 30000/840 DALI

LEGEND
DALI – version with digital dimmable driver DALI (2 – 3 pcs)
M1hAt – emergency back-up source with operating time of 1 hour (SA) for permanent illumination with battery autotesting
M3hAt – emergency back-up source with operating time of 3 hours (SA) for permanent illumination with battery autotesting
Batteries must be formatted before their putting into operation. Assembly instructions must be observed at installation.

CZECH LIGHT FITTINGS 219

 CANOPUS NB

LIGHT FITTING ATTACHMENT

a) With help of suspension eyes of M6
b) With help of a holder directly to the ceiling
c) With the help of adjustable holder directly on the ceiling or on the wall
d) With help of a chain hinge

LIGHT FITTING DETAILED VIEW

LIGHT FITTING DETAILED VIEW WITH AN EMERGENCY MODULE

220
 CANOPUS NB TR

CANOPUS NB T R
TECHNICAL DESCRIPTION
• Light fitting protection: IP65 • Reflector: parabolic polished aluminium with nar-
• Maximum ambient temperature: ta = 0-35 °C row emitting characteristics (NB - narrow beam)
and for the design with a back-up power supply • Body: steel sheet, white colour (RAL 9003), or
M1hAt, M3hAt inox AISI 304 at request
• Maximum system efficacy: 154 lm/W • Ventilation plug: type BVPB-01 made of polyam-
• The watt and lumen values can vary by ± 7,5 % ide, size M12 × 1.5
• Standard model - CRI > 80: 4000 K •S  ealing: EPDM attached to light fitting body
• MacAdam = 3 SDCM • Terminal block: interconnecting connector,
• Lifetime: 50,000 hours / L90B50 0.4 m cable
•D iffuser: transparent tempered safety glass (TR) • Installation: all versions delivered including
• Possibility of delivery of the diffuser with a safe- suspension lugs (4 pcs)
ty foil (SF) • Electric equipment: LED modules, current driv-
• EM kit with battery autotesting for M1hAt er or current driver DALI (2 – 3 pcs depending
and M3hAt on type)

CANOPUS NB TR CANOPUS NB TR MxhAt

CANOPUS NB TR
150° 180° 150°
90

120° 120°

90° 90°

650 800
450 450 150 60° 60°

30° 0° 30°
60

60
... MxhAt
150° 180° 150°

120° 120°

90° 90°
450

450
650

60° 60°

30° 0° 30°

C0
C90
350 462

Luminous flux Luminous flux Power System Net

Code Type of LED modules of light fitting consumption efficacy weight
[lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 35 °C - body: steel sheet, white colour - diffuser: tempered safety glass with parabolic reflector (TR)
74210 CANOPUS NB TR 22000/840 22000 19360 125 154 12,3
74220 CANOPUS NB TR 26000/840 26000 22880 157 145 12,5
74230 CANOPUS NB TR 30000/840 30000 26400 183 144 12,5

Autonomy Emergency Power

Net
light flux in standby Battery
Type weight
of light fitting mode type
[kg]
[hrs] [lm] [W]
EM kit for permanent emergency lighting with battery autotesting - diffuser: satinized tempered safety glass
... M1hAt 1 440 1,5 LiFePO4 +4,2
... M3hAt 3 440 1,5 LiFePO4 +4,4

CANOPUS NB TR
Code Type M1hAt M3hAt DALI DALI M1hAt DALI M3hAt
74210 CANOPUS NB TR 22000/840 74211 74213 74216 74217 74218
74220 CANOPUS NB TR 26000/840 74221 74223 74226 74227 74228
74230 CANOPUS NB TR 30000/840 74231 74233 74236 74237 74238

Example of type marking: 74236 = CANOPUS NB TR 30000/840 DALI

LEGEND
DALI – version with digital dimmable driver DALI (2 – 3 pcs)
M1hAt – emergency back-up source with operating time of 1 hour (SA) for permanent illumination with battery autotesting
M3hAt – emergency back-up source with operating time of 3 hours (SA) for permanent illumination with battery autotesting
Batteries must be formatted before their putting into operation. Assembly instructions must be observed at installation.

CZECH LIGHT FITTINGS 221

 CANOPUS NB TR

LIGHT FITTING ATTACHMENT

a) With help of suspension eyes of M6
b) With help of a holder directly to the ceiling
c) With the help of adjustable holder directly on the ceiling or on the wall
d) With help of a chain hinge

LIGHT FITTING DETAILED VIEW

LIGHT FITTING DETAILED VIEW WITH AN EMERGENCY MODULE

222
CANOPUS HE

152
lm/W

…h
 igh efficiency, for high ceilings, with sulphur-
resistant LED chips.
USE ADVANTAGES
The light fitting is suitable for large operations • Light fitting protection IP65 • In DALI version possibility of constant luminous
with high ceilings, industrial outdoor and indoor • Maximum ambient temperature up to ta = 35 °C flux for whole lifetime (CLO)
roofed spaces, warehouses, workshops, sports • Lifetime: 50,000 hours / L90B50 • Constant luminous flux even in ambient tem-
areas, transport terminals and utility structures • High mechanical robustness IK10 perature of -25 °C
without a danger of explosion of gas, dust and • Diffuser: satinized or transparent tempered •S  tandard model - CRI > 80: 4000 K
combustible fumes. safety glass • Easy installation with the help of supply con-
• Body: steel sheet - white colour (RAL 9003), or nector with cable 0,4 m CYSY 3 × 1.5, without
The light fitting is resistant to deformation, dust inox AISI 304 at request necessity of opening the light fitting
and splashing water. • Up to 45 % lower electricity consumption when •C  hips with high sulphur resistance
compared to tubes T5 •C  ertification: BALL-PROOF
Characteristics of the used tempered glass and • Possibility of delivery either in a deemed or
its shattering power are controlled by the ČSN permanently emergency design M1hAt and
EN 12150-1 standard. For applications where M3hAt
spontaneous fracture means a higher safety
risk, we recommend to use the version with the
safety film (SF).

up to up to
LED
35ºC -25ºC

CRI
220-240 V DALI
>80

CZECH LIGHT FITTINGS 223

 CANOPUS HE

CANOPUS HE
TECHNICAL DESCRIPTION
• Light fitting protection: IP65 • Body: steel sheet, white colour (RAL 9003), or
• Maximum ambient temperature: ta = 0-35 °C inox AISI 304 at request
and for the design with a back-up power supply • Ventilation plug: type BVPB-01 made of polyam-
M1hAt, M3hAt ide, size M12 × 1.5
• Maximum system efficacy: 155 lm/W •S  ealing: EPDM attached to light fitting body
• The watt and lumen values can vary by ± 7,5 % • Terminal block: interconnecting connector,
• Standard model - CRI > 80: 4000 K 0.4 m cable
• MacAdam = 3 SDCM • Installation: all versions delivered including
• Lifetime: 50,000 hours / L90B50 suspension lugs (4 pcs)
• Diffuser: satinized tempered safety glass • Electric equipment: LED sulphur-resistant
• Possibility of delivery of the diffuser with a safe- modules, current driver or current driver DALI
ty foil (SF) (2 – 3 pcs depending on type)
• EM kit with battery autotesting for M1hAt
and M3hAt

CANOPUS HE CANOPUS HE MxhAt

CANOPUS HE
150° 180° 150°
90

120° 120°

90° 90°
650 800
450 450 150 60° 60°

30° 0° 30°
60

60
... MxhAt
150° 180° 150°

120° 120°

90° 90°
450

450

60° 60°
650

30° 0° 30°

C0
C90

350 462

Luminous flux Luminous flux Power System Net

Code Type of LED modules of light fitting consumption efficacy weight
[lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 35 °C - body: steel sheet, white colour - diffuser: satinized tempered safety glass
74810 CANOPUS HE 22000/840 22000 18040 117 154 11,6
74820 CANOPUS HE 26000/840 26000 21320 137 155 11,8
74830 CANOPUS HE 30000/840 30000 24600 164 150 11,8

Autonomy Emergency Power

Net
light flux in standby Battery
Type weight
of light fitting mode type
[kg]
[hrs] [lm] [W]
EM kit for permanent emergency lighting with battery autotesting - diffuser: satinized tempered safety glass
... M1hAt 1 440 1,5 LiFePO4 +4,2
... M3hAt 3 440 1,5 LiFePO4 +4,4

CANOPUS HE
Code Type M1hAt M3hAt DALI DALI M1hAt DALI M3hAt
74810 CANOPUS HE 22000/840 74811 74812 74813 74814 74815
74820 CANOPUS HE 26000/840 74821 74822 74823 74824 74825
74830 CANOPUS HE 30000/840 74831 74832 74833 74834 74835

Example of type marking: 74834 = CANOPUS HE 30000/840 DALI M1hAt

LEGEND
DALI – version with digital dimmable driver DALI (2 – 3 pcs)
M1hAt – emergency back-up source with operating time of 1 hour (SA) for permanent illumination with battery autotesting
M3hAt – emergency back-up source with operating time of 3 hours (SA) for permanent illumination with battery autotesting
Batteries must be formatted before their putting into operation. Assembly instructions must be observed at installation.

224
 CANOPUS HE

LIGHT FITTING ATTACHMENT

a) With help of suspension eyes of M6
b) With help of a holder directly to the ceiling
c) With the help of adjustable holder directly on the ceiling or on the wall
d) With help of a chain hinge

LIGHT FITTING DETAILED VIEW

LIGHT FITTING DETAILED VIEW WITH AN EMERGENCY MODULE

CZECH LIGHT FITTINGS 225

 CANOPUS MAX

... for extreme temperatures -40 °C to +60 °C.

USE ADVANTAGES
The light fitting is suitable for sizable premises • Light fitting protection IP65
with high ceilings and extern ambient tempera- • Minimal ambient temperature ta = -40 °C • In DALI version possibility of constant luminous
tures from -40 °C to +60 °C. The light fitting is • Maximum ambient temperature up to ta = 60 °C flux for whole lifetime (CLO)
destined mainly for heating stations, metallurgi- • Lifetime: 50,000 hours / L80B10 • Constant luminous flux even in ambient tem-
cal lines, glass-works, but also for freezers, cool- • High mechanical robustness IK10 perature of -40 °C
ing plants and other premises without danger of • Diffuser: satinized or transparent tempered •S  tandard model - CRI > 80: 4000 K
explosion of gases, dusts and flammable vapors. safety glass •A  t request CRI > 80: 3000 K, 5000 K, 6500 K,
• Body: steel sheet, white colour (RAL 9003), or CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
The light fitting is resistant to deformation, dust inox AISI 304 • Easy installation with the help of supply con-
and splashing water. • Up to 45 % lower electricity consumption when nector with cable 0,4 m CYSY 3 × 1.5, without
compared to tubes T5 necessity of opening the light fitting
Characteristics of the used tempered glass and • Possibility of delivery either in a deemed or •C  ertification: Ball Proof
its shattering power are controlled by the ČSN permanently emergency design M1hAt and
EN 12150-1 standard. For applications where M3hAt
spontaneous fracture means a higher safety
risk, we recommend to use the version with the
safety film (SF).
up to up to
LED
60ºC -40ºC

CRI
220-240 V DALI L 80
>80 B 10

226
 CANOPUS MAX

CANOPUS MAX
TECHNICAL DESCRIPTION
• Light fitting protection: IP65 •E  M kit with battery autotesting
• Minimal ambient temperature ta = -40 °C • Body: steel sheet, white colour (RAL 9003),
• Maximum ambient temperature: ta = 60 °C or inox AISI 304
Maximum ambient temperature: ta = 0-35 °C • Ventilation plug: type BVPB-01 made of polyam-
with a back-up power supply M1hAt, M3hAt ide, size M12 × 1.5
• Lifetime: 50,000 hours / L80B10 •S  ealing: EPDM attached to light fitting body
• Maximum system efficacy: 144 lm/W • Terminal block: interconnecting connector,
• The watt and lumen values can vary by ± 7,5 % 0.4 m cable
• Standard model - CRI > 80: 4000 K • Installation: all versions delivered including
• MacAdam = 3 SDCM suspension lugs (4 pcs)
• Diffuser: satinized tempered safety glass • Electric equipment: LED modules, current driv-
• Possibility to equip the diffuser with a safety foil (SF) er or current driver DALI (2 pcs)

CANOPUS MAX CANOPUS MAX MxhAt CANOPUS MAX

150° 180° 150°

120° 120°
90

90° 90°

650 800
60° 60°
450 450 150
30° 0° 30°
60

60
... MxhAt
150° 180° 150°

120° 120°

90° 90°
450

450

60° 60°
650

30° 0° 30°

C0
C90

350 462

Max. ambient Luminous flux Luminous flux Power System Net

Code Type temperature of LED modules of light fitting consumption efficacy weight
[°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 60 °C - body: steel sheet, white colour - diffuser: satinized tempered safety glass
74610 CANOPUS MAX 22000/840 60 22000 18040 125 144 16,0
74600 CANOPUS MAX 26000/840 55 26000 21320 157 135 16,0
74620 CANOPUS MAX 30000/840 50 30000 24600 183 134 16,0

Autonomy Emergency Power

Net
light flux in standby Battery
Type weight
of light fitting mode type
[kg]
[hrs] [lm] [W]
EM kit for permanent emergency lighting with battery autotesting - diffuser: satinized tempered safety glass
... M1hAt 1 440 1,5 LiFePO4 +4,2
... M3hAt 3 440 1,5 LiFePO4 +4,4

CANOPUS MAX steel sheet, white colour (RAL 9003)

Code Type M1hAt M3hAt DALI DALI M1hAt DALI M3hAt

74610 CANOPUS MAX 22000/840 74611 74612 74615 74616 74617
74600 CANOPUS MAX 26000/840 74601 74602 74605 74606 74607
74620 CANOPUS MAX 30000/840 74621 74622 74625 74626 74627

Example of type marking: 74625 = CANOPUS MAX 30000/840 DALI

CANOPUS MAX INOX inox AISI 304

Code Type M1hAt M3hAt DALI DALI M1hAt DALI M3hAt
74710 CANOPUS MAX 22000/840 INOX 74711 74712 74715 74716 74717
74700 CANOPUS MAX 26000/840 INOX 74701 74702 74705 74706 74707
74720 CANOPUS MAX 30000/840 INOX 74721 74722 74725 74726 74727

CZECH LIGHT FITTINGS 227

 CANOPUS MAX

LEGEND
DALI – version with digital dimmable driver DALI
M1hAt – emergency back-up source with operating time of 1 hour (SA) for permanent illumination with battery autotesting
M3hAt – emergency back-up source with operating time of 3 hours (SA) for permanent illumination with battery autotesting
Batteries must be formatted before their putting into operation. Assembly instructions must be observed at installation.

LIGHT FITTING ATTACHMENT

a) With help of suspension eyes of M6
b) With help of a holder directly to the ceiling
c) With the help of adjustable holder directly on the ceiling or on the wall
d) With help of a chain hinge

LIGHT FITTING DETAILED VIEW

LIGHT FITTING DETAILED VIEW WITH AN EMERGENCY MODULE

228
 CANOPUS MAX NB

CANOPUS MAX NB
TECHNICAL DESCRIPTION
• Light fitting protection: IP65 •E  M kit with battery autotesting
• Minimal ambient temperature ta = -40 °C • Body: steel sheet, white colour (RAL 9003),
• Maximum ambient temperature: ta = 60 °C or inox AISI 304
Maximum ambient temperature: ta = 0-35 °C • Ventilation plug: type BVPB-01 made of polyam-
with a back-up power supply M1hAt, M3hAt ide, size M12 × 1.5
• Lifetime: 50,000 hours / L80B10 •S  ealing: EPDM attached to light fitting body
• Maximum system efficacy: 146 lm/W • Terminal block: interconnecting connector,
• The watt and lumen values can vary by ± 7,5 % 0.4 m cable
• Standard model - CRI > 80: 4000 K • Installation: all versions delivered including
• MacAdam = 3 SDCM suspension lugs (4 pcs)
• Diffuser: satinized tempered safety glass • Electric equipment: LED modules, current driv-
• Possibility to equip the diffuser with a safety foil (SF) er or current driver DALI (2 pcs)
• Reflector: parabolic polished aluminium with nar-
row emitting characteristics (NB - narrow beam)

CANOPUS MAX NB CANOPUS MAX NB MxhAt CANOPUS MAX NB

150° 180° 150°

120° 120°
90

90° 90°

650 800
60° 60°
450 450 150
30° 0° 30°
60

60
... MxhAt
150° 180° 150°

120° 120°

90° 90°
450

450
650

60° 60°

30° 0° 30°

C0
C90
350 462

Max. ambient Luminous flux Luminous flux Power System Net

Code Type temperature of LED modules of light fitting consumption efficacy weight
[°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 60 °C - body: steel sheet, white colour - diffuser: satinized tempered safety glass with parabolic reflector
74640 CANOPUS MAX NB 22000/840 60 22000 18260 125 146 16,6
74630 CANOPUS MAX NB 26000/840 55 26000 21580 157 137 16,6
74650 CANOPUS MAX NB 30000/840 50 30000 24900 183 136 16,6

Autonomy Emergency Power

Net
light flux in standby Battery
Type weight
of light fitting mode type
[kg]
[hrs] [lm] [W]
EM kit for permanent emergency lighting with battery autotesting - diffuser: satinized tempered safety glass
... M1hAt 1 440 1,5 LiFePO4 +4,2
... M3hAt 3 440 1,5 LiFePO4 +4,4

CANOPUS MAX NB steel sheet, white colour (RAL 9003)

Code Type M1hAt M3hAt DALI DALI M1hAt DALI M3hAt

74640 CANOPUS MAX NB 22000/840 74641 74642 74645 74646 74647
74630 CANOPUS MAX NB 26000/840 74631 74632 74635 74636 74637
74650 CANOPUS MAX NB 30000/840 74651 74652 74655 74656 74657

Example of type marking: 74655 = CANOPUS MAX NB 30000/840 DALI

CANOPUS MAX NB INOX inox AISI 304

Code Type M1hAt M3hAt DALI DALI M1hAt DALI M3hAt
74740 CANOPUS MAX NB 22000/840 INOX 74741 74742 74745 74746 74747
74730 CANOPUS MAX NB 26000/840 INOX 74731 74732 74735 74736 74737
74750 CANOPUS MAX NB 30000/840 INOX 74751 74752 74755 74756 74757

CZECH LIGHT FITTINGS 229

 CANOPUS MAX NB

LEGENDA
LEGEND
DALI – version with digital dimmable driver DALI
M1hAt – emergency back-up source with operating time of 1 hour (SA) for permanent illumination with battery autotesting
M3hAt – emergency back-up source with operating time of 3 hours (SA) for permanent illumination with battery autotesting
Batteries must be formatted before their putting into operation. Assembly instructions must be observed at installation.

LIGHT FITTING ATTACHMENT

a) With help of suspension eyes of M6
b) With help of a holder directly to the ceiling
c) With the help of adjustable holder directly on the ceiling or on the wall
d) With help of a chain hinge

LIGHT FITTING DETAILED VIEW

LIGHT FITTING DETAILED VIEW WITH AN EMERGENCY MODULE

230
 CANOPUS MAX NB TR

CANOPUS MAX NB T R
TECHNICAL DESCRIPTION
• Light fitting protection: IP65 •E  M kit with battery autotesting
• Minimal ambient temperature ta = -40 °C • Body: steel sheet, white colour (RAL 9003) ,
• Maximum ambient temperature: ta = 60 °C or inox AISI 304
Maximum ambient temperature: ta = 0-35 °C • Ventilation plug: type BVPB-01 made of polyam-
with a back-up power supply M1hAt, M3hAt ide, size M12 × 1.5
• Lifetime: 50,000 hours / L80B10 •S  ealing: EPDM attached to light fitting body
• Maximum system efficacy: 154 lm/W • Terminal block: interconnecting connector,
• The watt and lumen values can vary by ± 7,5 % 0.4 m cable
• Standard model - CRI > 80: 4000 K • Installation: all versions delivered including
• MacAdam = 3 SDCM suspension lugs (4 pcs)
•D iffuser: transparent tempered safety glass (TR) • Electric equipment: LED modules, current driv-
• Possibility to equip the diffuser with a safety foil (SF) er or current driver DALI (2 pcs)
• Reflector: parabolic polished aluminium with nar-
row emitting characteristics (NB - narrow beam)

CANOPUS MAX NB TR CANOPUS MAX NB TR MxhAt CANOPUS MAX NB TR

150° 180° 150°

120° 120°
90

90° 90°

650 800
60° 60°
450 450 150
30° 0° 30°
60

60
... MxhAt
150° 180° 150°

120° 120°

90° 90°
450

450
650

60° 60°

30° 0° 30°

C0
C90
350 462

Max. ambient Luminous flux Luminous flux Power System Net

Code Type temperature of LED modules of light fitting consumption efficacy weight
[°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 60 °C - body: steel sheet, white colour - diffuser: tempered safety glass with parabolic reflector (TR)
74670 CANOPUS MAX NB TR 22000/840 60 22000 19360 125 154 16,6
74660 CANOPUS MAX NB TR 26000/840 55 26000 22880 157 145 16,6
74680 CANOPUS MAX NB TR 30000/840 50 30000 26400 183 144 16,6

Autonomy Emergency Power

Net
light flux in standby Battery
Type weight
of light fitting mode type
[kg]
[hrs] [lm] [W]
EM kit for permanent emergency lighting with battery autotesting - diffuser: satinized tempered safety glass
... M1hAt 1 440 1,5 LiFePO4 +4,2
... M3hAt 3 440 1,5 LiFePO4 +4,4

CANOPUS MAX NB TR steel sheet, white colour (RAL 9003)

Code Type M1hAt M3hAt DALI DALI M1hAt DALI M3hAt

74670 CANOPUS MAX NB TR 22000/840 74671 74672 74675 74676 74677
74660 CANOPUS MAX NB TR 26000/840 74661 74662 74665 74666 74667
74680 CANOPUS MAX NB TR 30000/840 74681 74682 74685 74686 74687

Example of type marking: 74685 = CANOPUS MAX NB TR 30000/840 DALI

CANOPUS MAX NB TR INOX inox AISI 304

Code Type M1hAt M3hAt DALI DALI M1hAt DALI M3hAt
74770 CANOPUS MAX NB TR 22000/840 INOX 74771 74772 74775 74776 74777
74760 CANOPUS MAX NB TR 26000/840 INOX 74761 74762 74765 74766 74767
74780 CANOPUS MAX NB TR 30000/840 INOX 74781 74782 74785 74786 74787

CZECH LIGHT FITTINGS 231

 CANOPUS MAX NB TR

LEGEND
DALI – version with digital dimmable driver DALI
M1hAt – emergency back-up source with operating time of 1 hour (SA) for permanent illumination with battery autotesting
M3hAt – emergency back-up source with operating time of 3 hours (SA) for permanent illumination with battery autotesting
Batteries must be formatted before their putting into operation. Assembly instructions must be observed at installation.

LIGHT FITTING ATTACHMENT

a) With help of suspension eyes of M6
b) With help of a holder directly to the ceiling
c) With the help of adjustable holder directly on the ceiling or on the wall
d) With help of a chain hinge

LIGHT FITTING DETAILED VIEW

LIGHT FITTING DETAILED VIEW WITH AN EMERGENCY MODULE

232
 CANOPUS accessories

Ceiling holder
Serves to suspend the light fitting from the ceiling.

Weight
Code Type Description
[kg]
50080 CANOPUS holder 1 Metal suspender for direct suspension from the ceiling. Screw 2,3
M6 × 16 - 8 pcs for assembly.
50086 CANOPUS holder 1 Stainless-steel suspender for direct suspension from the ceiling. 2,3
INOX Screw M6 × 16 - 8 pcs for assembly.

Adjustable holder
Serves to suspend the light fitting on the wall, ceiling and skew surface, allows adjusting the light fitting from 0-90°, by 15°.

Weight
Code Type Description
[kg]
50081 CANOPUS holder 2 Metal adjustable holder for the ceiling and for the wall. Adjust- 3,0
ment by 15° in a range of 0-90°. Screw M6 × 16 - 8 pcs for
assembly.
50087 CANOPUS holder 2 Stainless-steel adjustable holder for the ceiling and for the wall. 3,0
INOX Adjustment by 15° in a range of 0-90°. Screw M6 × 16 - 8 pcs for
assembly.

Chain suspender
Serves to suspend the light fitting with the help of chains on a threaded rod or with the help of a lug on a hook.

Weight
Code Type Description
[kg]
50082 CANOPUS suspender Chain suspender with height 40 cm. (Suspender holder - 1 pc, 0,6
lugs M6 - 4 pcs, snap-hooks - 4 pcs, chains - 4 pcs).
50088 CANOPUS suspender INOX chain suspender with height 40 cm. (Suspender holder - 1 0,6
INOX pc, lugs M6 - 4 pcs, snap-hooks - 4 pcs, chains - 4 pcs).

Protective grille
The metal grille protects the light fitting against mechanical damage and tampering. It is fixed on the ceiling holder of the light fitting.
Surface finish with RAL 9003 powder coating.

Weight
Code Type Description
[kg]
50083 CANOPUS protective Metal protective grille (for variants without an emergency module) 3,6
grille with mesh size 50 × 50 mm. (Protective basket, 2 threaded rods
M10, 4 closed nuts M10, 4 distance tubes IRS16, 4 washers M10).
50085 CANOPUS Mxh protec- Metal protective grille (for variants with an emergency module) 4,4
tive grille with mesh size 50 × 50 mm. (Protective basket, 2 threaded rods
M10, 4 closed nuts M10, 4 distance tubes IRS16, 4 washers M10).

CZECH LIGHT FITTINGS 233

LINEA

INDOOR
PLASTIC
SURFACE-MOUNTED
 PRODUCT OVERVIEW

LINEA – indoor plastic LED light fitting

LINEA
page 236

IP54 LINEA
page 236

LINEA SQUARE
page 238

IP54 LINEA SQUARE

page 238

LINEA ROUND
page 240

IP54 LINEA ROUND

page 240

LINEA
ACCESSORIES
page 242

LINEA
ACCESSORIES
page 242

www.bim.lighting/en

CZECH LIGHT FITTINGS 235

 LINEA

... indoor, surface-mounted, plastic.

USE ADVANTAGES
LINEA family is a perfect lighting solution of •L  ight fitting protection IP54 •S  tandard model - CRI > 80: 4000 K
modern and technically functional illumination. •M  aximum ambient temperature up to ta = •A  t request CRI > 80: 3000 K, 5000 K, 6500 K,
It offers ceiling and wall-mounted luminaires 35 °C CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
with balanced shadowing and uniform light. • Lifetime: 50,000 hours / L90B10 • It can be delivered in dimmable or emergency
Thanks to various sizes, individual premises as • Diffuser: translucent polycarbonate (PC) = version
well as public buildings can be attractively illu- high light transmission •C  ertification: ESČ, ENEC, CB
minated. • Body: white polycarbonate (PC) = high me-
chanical resistance
The Linea light fitting line can be used as a com- • Up to 45 % lower electricity consumption
prehensive solution for lighting of office build- when compared to tubes T5
ings, schools, hospitals, libraries, as well as • In DALI version possibility of constant lumi-
individual lighting of flat interiors, corridors, nous flux for whole lifetime (CLO)
sanitary and welfare facilities.

Thanks to its high luminous efficiency and low

electricity consumption it is a suitable replace-
ment for light fittings with fluorescent tubes.
up to up to
LED
35ºC -25ºC

CRI
220-240 V DALI L 90
>80 B 10

236
 LINEA

LINEA
TECHNICAL DESCRIPTION
• Light fitting protection: IP54 • Body: white polycarbonate (PC), UV stable, im-
• Maximum ambient temperature: ta = 35  °C, pact-resistant
Maximum ambient temperature: ta = 0-25 °C •R  eflector: steel sheet, white colour (RAL 9003)
(version with emergency back-up source for •R  otary cap: polyamide + 10 % glass fibre
1 or 3 hours; M1h, M3h with autotest) • Sealing: polyurethane (PUR), foamed body
• Maximum system efficacy: 140 lm/W groove
• The watt and lumen values can vary by ± 7,5 % •C  able glands: rubber (SBS)
• Standard model - CRI > 80: 4000 K • Terminal block: screwless, three-pole (basic
• MacAdam = 3 SDCM version)
• Lifetime: 50,000 hours / L90B10 • Electric equipment: LED modules, current driv-
• Diffuser: translucent polycarbonate (PC), UV er or current driver DALI
stable, impact-resistant

LINEA 1.4ft LINEA 2.4ft

150° 180° 150° 150° 180° 150°

A 120° 120° 120° 120°

D 159 109
90° 90° 90° 90°

85
60° 60°
C0 60° 60°

C90
30° 0° 30° 30° 0° 30°

Luminous flux Luminous flux Power System Net A D

Code Type of LED modules of light fitting consumption efficacy weight
[kg] [mm] [mm]
[lm] [lm] [W] [lm/W]
For ambient temperature ta = 35 °C - body: white polycarbonate - diffuser: translucent polycarbonate
63140 LINEA 1.4ft 2600/840 2580 2170 16 136 1,9 1160 650
63150 LINEA 1.4ft 3200/840 3110 2610 20 131 1,9 1160 650
63160 LINEA 1.4ft 4400/840 4350 3650 27 135 1,9 1160 650
63240 LINEA 2.4ft 5200/840 5150 4220 31 136 2,5 1160 650
63250 LINEA 2.4ft 6400/840 6260 5130 37 139 2,5 1160 650
63260 LINEA 2.4ft 8800/840 8710 7140 51 140 2,5 1160 650

63150 LINEA 1.4ft 3200/840 = suitable replacement for T8 fl. tube light fitting SM 136 – 1 × 36 W 63250 LINEA 2.4ft 6400/840 = suitable replacement for T8 fl. tube light fitting SM 236 – 2 × 36 W
63160 LINEA 1.4ft 4400/840 = suitable replacement for T8 fl. tube light fitting SM 158 – 1 × 58 W 63260 LINEA 2.4ft 8800/840 = suitable replacement for T8 fl. tube light fitting SM 258 – 2 × 58 W

LINEA Diffuser made of translucent polycarbonate

Code Type M1h M3h DALI DALI M1h DALI M3h SNS CORRIDOR
63140 LINEA 1.4ft 2600/840 63144 x 63143 63147 x x x
63150 LINEA 1.4ft 3200/840 63154 x 63153 63157 x x x
63160 LINEA 1.4ft 4400/840 63164 x 63163 63167 x x x
63240 LINEA 2.4ft 5200/840 63244 63245 63243 63247 63246 63241 63248
63250 LINEA 2.4ft 6400/840 63254 63255 63253 63257 63256 63251 63258
63260 LINEA 2.4ft 8800/840 63264 63265 63263 63267 63266 63261 63268

LEGEND
DALI – version with digital dimmable driver DALI
SNS – microwave motion sensor
CORRIDOR – version with digital dimmable driver DALI and set corridor function

M1h – emergency back-up source with operating time of 1 hour (SA) for both permanent and emergency illumination with autotest
M3h – emergency back-up source with operating time of 3 hours (SA) for both permanent and emergency illumination with autotest
Batteries must be formatted before their putting into operation. Assembly instructions must be observed at installation.

LIGHT FITTING ATTACHMENT AND ITS DETAILED VIEW

Directly to a ceiling or a wall with the use of screws LINEA

CZECH LIGHT FITTINGS 237

 LINEA SQUARE

… interior square, plastic, surface-mounting.

USE ADVANTAGES
LINEA family is a perfect lighting solution of •L  ight fitting protection IP54 •S  tandard model - CRI > 80: 4000 K
modern and technically functional illumination. •M  aximum ambient temperature up to ta = •A  t request CRI > 80: 3000 K, 5000 K, 6500 K
It offers ceiling and wall-mounted luminaires 35 °C • It can be delivered in dimmable or emergency
with balanced shadowing and uniform light. • Lifetime: 50,000 hours / L90B10 version
Thanks to various sizes, individual premises as • Diffuser: translucent polycarbonate (PC) = •C  ertification: ENEC, CB
well as public buildings can be attractively illu- high light transmission
minated. • Body: white polycarbonate (PC) = high me-
chanical resistance
The Linea light fitting line can be used as a com- • Up to 50 % lower electricity consumption
prehensive solution for lighting of office build- when compared to compact fluorescent tubes
ings, schools, hospitals, libraries, as well as • In DALI version possibility of constant lumi-
individual lighting of flat interiors, corridors, nous flux for whole lifetime (CLO)
sanitary and welfare facilities.

Thanks to its high luminous efficiency and low

electricity consumption it is a suitable replace-
ment for light fittings with fluorescent tubes.
up to up to
LED
35ºC -25ºC

CRI
220-240 V DALI L 90
>80 B 10

238
 LINEA SQUARE

LINEA SQUARE
TECHNICAL DESCRIPTION
• Light fitting protection: IP54 • Body: white polycarbonate (PC), UV stable, im-
• Maximum ambient temperature: ta = 35  °C, pact-resistant
Maximum ambient temperature: ta = 0-25 °C •R  eflector: steel sheet, white colour (RAL 9003)
(version with emergency back-up source for •R  otary cap: polyamide + 10 % glass fibre
1 or 3 hours; M1h, M3h with autotest) • Sealing: polyurethane (PUR), foamed body
• Maximum system efficacy: 127 lm/W groove
• The watt and lumen values can vary by ± 7,5 % • Cable glands: rubber (SBS)
• Standard model - CRI > 80: 4000 K • Terminal block: screwless, three-pole (basic
• MacAdam = 3 SDCM version)
• Lifetime: 50,000 hours / L90B10 • Electric equipment: LED modules, current driv-
• Diffuser: translucent polycarbonate (PC), UV er or current driver DALI
stable, impact-resistant

LINEA SQUARE
150° 180° 150°

330 226 120° 120°

85

90° 90°

C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

Code Type temperature of LED modules of light fitting consumption efficacy weight
[°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature max. ta = 35 °C - body: white polycarbonate - diffuser: translucent polycarbonate
63348 LINEA SQUARE 1550/840 35 1550 1240 10 124 1,4
63349 LINEA SQUARE 1900/840 35 1900 1520 12 127 1,4
63350 LINEA SQUARE 2200/840 35 2200 1760 14 126 1,4
63351 LINEA SQUARE 2500/840 35 2500 2000 16 125 1,4
63560 LINEA SQUARE 3600/840 30 3600 2880 24 120 1,5

63560 LINEA SQUARE 3600/840 = suitable replacement for compact fluorescent lamps 2 × 26 W

LINEA SQUARE Diffuser made of translucent polycarbonate

Code Type CORRIDOR CORRIDOR

M1h M3h DALI DALI M1h DALI M3h SNS SNS M1h SNS M3h CORRIDOR
M1h M3h
63348 LINEA SQUARE 1550/840 63356 63360 x x x 63352 63365 63369 x x x
63349 LINEA SQUARE 1900/840 63357 63361 63374 63381 63384 63353 63366 63370 63377 63388 63392
63350 LINEA SQUARE 2200/840 63358 63362 63375 63382 63385 63354 63367 63371 63378 63389 63393
63351 LINEA SQUARE 2500/840 63359 63363 63376 63383 63386 63355 63368 63372 63379 63390 63394
63560 LINEA SQUARE 3600/840 63564 63364 63563 63567 63387 63561 63566 63373 63380 63391 63395

Example of type marking: 63376 = LINEA SQUARE 2500/840 DALI

LEGEND
DALI – version with digital dimmable driver DALI
SNS – microwave motion sensor
CORRIDOR – version with digital dimmable driver DALI and set corridor function

M1h – emergency back-up source with operating time of 1 hour (SA) for both permanent and emergency illumination with autotest
M3h – emergency back-up source with operating time of 3 hours (SA) for both permanent and emergency illumination with autotest
Batteries must be formatted before their putting into operation. Assembly instructions must be observed at installation.

LIGHT FITTING ATTACHMENT AND ITS DETAILED VIEW

Directly to a ceiling or a wall with the use of screws LINEA SQUARE

CZECH LIGHT FITTINGS 239

 LINEA ROUND

… interior circular, plastic, surface-mounting.

USE ADVANTAGES
LINEA family is a perfect lighting solution of •L  ight fitting protection IP54 •S  tandard model - CRI > 80: 4000 K
modern and technically functional illumination. • Maximum ambient temperature up to ta = 35 °C •A  t request CRI > 80: 3000 K, 5000 K, 6500 K
It offers ceiling and wall-mounted luminaires • Lifetime: 50,000 hours / L90B10 • It can be delivered in dimmable or emergency
with balanced shadowing and uniform light. • Diffuser: translucent polycarbonate (PC) = high version
Thanks to various sizes, individual premises as light transmission •C  ertification: ENEC, CB
well as public buildings can be attractively illu- • Body: white polycarbonate (PC) = high me-
minated. chanical resistance
• Up to 50 % lower electricity consumption when
The Linea light fitting line can be used as a com- compared to compact fluorescent tubes
prehensive solution for lighting of office build- • In DALI version possibility of constant luminous
ings, schools, hospitals, libraries, as well as flux for whole lifetime (CLO)
individual lighting of flat interiors, corridors,
sanitary and welfare facilities.

Thanks to its high luminous efficiency and low

electricity consumption it is a suitable replace-
ment for light fittings with fluorescent tubes.
up to up to
LED
35ºC -25ºC

CRI
220-240 V DALI L 90
>80 B 10

240
 LINEA ROUND

LINEA ROUND
TECHNICAL DESCRIPTION
• Light fitting protection: IP54 • Body: white polycarbonate (PC), UV stable, im-
• Maximum ambient temperature: ta = 35  °C, pact-resistant
Maximum ambient temperature: ta = 0-25 °C •R  eflector: steel sheet, white colour (RAL 9003)
(version with emergency back-up source for •R  otary cap: polyamide + 10 % glass fibre
1 or 3 hours; M1h, M3h with autotest) • Sealing: polyurethane (PUR), foamed body
• Maximum system efficacy: 125 lm/W groove
• The watt and lumen values can vary by ± 7,5 % • Cable glands: rubber (SBS)
• Standard model - CRI > 80: 4000 K • Terminal block: screwless, three-pole (basic
• MacAdam = 3 SDCM version)
• Lifetime: 50,000 hours / L90B10 • Electric equipment: LED modules, current driv-
• Diffuser: translucent polycarbonate (PC), UV er or current driver DALI
stable, impact-resistant

53 LINEA ROUND
150° 180° 150°

300 120° 120°

62
85

90° 90°

0
11
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

Code Type temperature of LED modules of light fitting consumption efficacy weight
[°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature max. ta = 35 °C - body: white polycarbonate - diffuser: translucent polycarbonate
63301 LINEA ROUND 1550/840 35 1550 1220 10 122 1
63302 LINEA ROUND 1900/840 35 1900 1500 12 125 1
63303 LINEA ROUND 2200/840 35 2200 1740 14 124 1
63304 LINEA ROUND 2500/840 35 2500 1980 16 124 1
63640 LINEA ROUND 3600/840 30 3600 2840 24 118 1,1

63640 LINEA ROUND 3600/840 = suitable replacement for compact fluorescent lamps 2 × 26 W

LINEA ROUND Diffuser made of translucent polycarbonate

Code Type CORRIDOR CORRIDOR

M1h M3h DALI DALI M1h DALI M3h SNS SNS M1h SNS M3h CORRIDOR
M1h M3h
63301 LINEA ROUND 1550/840 63309 63313 x x x 63305 63317 63321 x x x
63302 LINEA ROUND 1900/840 63310 63314 63326 63333 63336 63306 63318 63322 63329 63340 63344
63303 LINEA ROUND 2200/840 63311 63315 63327 63334 63337 63307 63319 63323 63330 63341 63345
63304 LINEA ROUND 2500/840 63312 63316 63328 63335 63338 63308 63320 63324 63331 63342 63346
63640 LINEA ROUND 3600/840 63664 63665 63663 63667 63339 63641 63646 63325 63332 63343 63347

Example of type marking: 63333 = LINEA ROUND 1900/840 DALI M1h

LEGEND
DALI – version with digital dimmable driver DALI
SNS – microwave motion sensor
CORRIDOR – version with digital dimmable driver DALI and set corridor function

M1h – emergency back-up source with operating time of 1 hour (SA) for both permanent and emergency illumination with autotest
M3h – emergency back-up source with operating time of 3 hours (SA) for both permanent and emergency illumination with autotest
Batteries must be formatted before their putting into operation. Assembly instructions must be observed at installation.

LIGHT FITTING ATTACHMENT AND ITS DETAILED VIEW

Directly to a ceiling or a wall with the use of screws LINEA ROUND

CZECH LIGHT FITTINGS 241

 LINEA accessories

OM – protective grid
The metal grid protects the light fitting against mechanical damage and unauthorised handling. It is attached to the surface with the use of screws.
The surface is treated with the RAL 9003 powder-coated colour.

Weight
Code Type Description
[kg]
11942 OM 236 protective grid for types 236, 228/254, 2.4ft (1300 × 220 × 130 mm) 1,7

242
LUXOR LED

INDOOR
METAL
CEILING-MOUNTED
RASTER
 PRODUCT OVERVIEW

LUXOR LED – indoor metal LED light fitting

LUXOR LED
page 246

IP40 LUXOR LED

page 246

LUXOR LED
ACCESSORIES
page 249

LUXOR LED
ACCESSORIES
page 249

CZECH LIGHT FITTINGS 245

 LUXOR LED

… indoor metal.

USE ADVANTAGES
LUXOR LED is the perfect solution for office, • Light fitting protection IP20 •S  tandard model - CRI > 80: 4000 K
education, halls, hospitals and shop & retail. • Maximum ambient temperature up to ta = 35 °C • At request CRI > 80: 3000 K, 5000 K, 6500 K,
Various sizes and three mounting methods are • Lifetime: 50 000 hours / L90B10 CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
available. • Optical system: shiny parabolic louvre, UGR ‹ 19 • It can be delivered in dimmable or emergency
• Body: steel sheet, white (RAL 9003) or silver version
It is the luminaire with highly specular parabolic (RAL 9006) colour
louvre of glare-free effects, UGR ‹19. • Up to 45 % lower electricity consumption when
compared to tubes T5
LUXOR LED creates an atmosphere of well- • In DALI version possibility of constant luminous
being and can be used for daycare facilities too. flux for whole lifetime (CLO)
LUXOR LED complies the European Lighting
Standard EN 12461-1 and can also be used for
day nurseries.

up to up to CRI
LED >80
35ºC -25ºC

L 90 DALI

B 10

246
 LUXOR LED

LUXOR LED
TECHNICAL DESCRIPTION
• Light fitting protection: IP20 •B
 ody: steel sheet, white (RAL 9003) or silver
• Maximum ambient temperature: ta = 35 °C, (RAL 9006) colour
Maximum ambient temperature: ta = 0-25 °C •C
 able gland: rubber (SBS), white
version with emergency back-up source Mxh •T
 erminal block: screwless, three-pole
with autotest •C
 over secured by: magnets and plastic rivets
• Maximum system efficacy: 108 lm/W •E
 lectric equipment: LED modules, current
• The watt and lumen values can vary by ± 7,5 % driver or current driver DAL
• Standard model CRI > 80: 4000 K
• MacAdam = 3 SDCM
• Lifetime: 50 000 hodin / L90B10
• Diffuser: shiny parabolical grid, UGR 19

LUXOR LED 1.4ft LUXOR LED SQUARE

150° 180° 150° 150° 180° 150°

120° 120° 120° 120°

90° 90° 90° 90°

60° 60°
C0 60° 60°

C90
30° 0° 30° 30° 0° 30°

Luminous flux Luminous flux Power System Net A D

Code Type of LED modules of light fitting consumption efficacy weight
[kg] [mm] [mm]
[lm] [lm] [W] [lm/W]
For ambient temperature ta = 35 °C - body: steel sheet, white colour - diffuser shiny parabolical grid
102249 LUXOR LED 1.2ft 1600/840 1580 1010 10 101 2,7 664 450
102250 LUXOR LED 1.4ft 3200/840 3110 1990 20 100 4,4 1224 1030
102251 LUXOR LED 1.5ft 4000/840 3880 2480 24 103 5,2 1504 1310

102252 LUXOR LED 2.2ft 3200/840 3110 1990 19 105 3,3 664 450
102253 LUXOR LED 2.4ft 6400/840 6260 4010 37 108 5,5 1224 1030
102254 LUXOR LED 2.5ft 8000/840 7750 4960 46 108 6,8 1504 1310

102255 LUXOR LED SQUARE 6400/840 6260 4010 37 108 6,0 595 500

LUXOR LED body lacquered steel sheet - white colour

Code Type M1h M3h DALI DALI M1h DALI M3h

102249 LUXOR LED 1.2ft 1600/840 102281 102288 102295 102302 102309
102250 LUXOR LED 1.4ft 3200/840 102282 102289 102296 102303 102310
102251 LUXOR LED 1.5ft 4000/840 102283 102290 102297 102304 102311

102252 LUXOR LED 2.2ft 3200/840 102284 102291 102298 102305 102312
102253 LUXOR LED 2.4ft 6400/840 102285 102292 102299 102306 102313
102254 LUXOR LED 2.5ft 8000/840 102286 102293 102300 102307 102314

102255 LUXOR LED SQUARE 6400/840 102287 102294 102301 102308 102315

Example of type marking: 102306 = LUXOR LED 2.4ft 6400/840 DALI M1h

CZECH LIGHT FITTINGS 247

 LUXOR LED

LUXOR LED s body lacquered steel sheet - silver colour (s)

Code Type M1h M3h DALI DALI M1h DALI M3h

102316 LUXOR LED 1.2ft 1600/840 102323 102330 102337 102344 102351
102317 LUXOR LED 1.4ft 3200/840 102324 102331 102338 102345 102352
102318 LUXOR LED 1.5ft 4000/840 102325 102332 102339 102346 102353

102319 LUXOR LED 2.2ft 3200/840 102326 102333 102340 102347 102354
102320 LUXOR LED 2.4ft 6400/840 102327 102334 102341 102348 102355
102321 LUXOR LED 2.5ft 8000/840 102328 102335 102342 102349 102356

102322 LUXOR LED SQUARE 6400/840 102329 102336 102343 102350 102357

Example of type marking: 102326 = LUXOR LED 2.2ft 4400/840 M1h s

LEGEND
s – silver colour RAL 9006 M1h – emergency back-up source with operating time of 1 hour (SA) for both permanent and
DALI – version with electronic and digitally dimmed ballast module op- emergency illumination with autotest
erated via DALI protocol M3h – emergency back-up source with operating time of 3 hour (SA) for both permanent and
emergency illumination with autotest
Batteries must be formatted before their putting into operation. Assembly instructions must be
observed at installation.

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws
b) By suspending to a ceiling with the use of wire-cord suspensions
c) Installation into lower ceiling

LIGHT FITTING DETAILED VIEW

LUXOR LED

248
 LUXOR accessories

Ceiling suspender kit for LUXOR luminaires

Weight
Code Type Description
[kg]
101344 ZL 1 - S3 a wire suspension kit with a maximum length of 1.5m to hang single-line light 0,2
fixtures (1.2ft, 1.4ft, 1.5ft) including a 3-core supply cable (a steel Y wire with a
keyhole hanging bracket and a span of 150 mm including a ceiling wire holder
clip – 2 pcs, supply cable, ceiling rose, three-pole terminal block)
101458 ZL 1 - S5 a wire suspension kit with a maximum length of 1.5m to hang single-line light 0,2
fixtures (1.2ft, 1.4ft, 1.5ft) including a 5-core supply cable (a steel Y wire with a
keyhole hanging bracket and a span of 150 mm including a ceiling wire holder
clip – 2 pcs, supply cable, ceiling rose, three-pole terminal block)

Weight
Code Type Description
[kg]
101456 ZL 2 - S3 a wire suspension kit with a maximum length of 1.5m to hang double-line light 0,2
fixtures (2.2ft, 2.4ft, 2.5ft) including a 3-core supply cable (a steel Y wire with a
keyhole hanging bracket and a span of 300 mm including a ceiling wire holder
clip – 2 pcs, supply cable, ceiling rose, three-pole terminal block)
101494 ZL 2 - S5 a wire suspension kit with a maximum length of 1.5m to hang double-line light 0,2
fixtures (2.2ft, 2.4ft, 2.5ft) including a 5-core supply cable (a steel Y wire with a
keyhole hanging bracket and a span of 300 mm including a ceiling wire holder
clip – 2 pcs, supply cable, ceiling rose, three-pole terminal block)

Ceiling suspender kit for LUXOR SQUARE luminaires

Weight
Code Type Description
[kg]
101457 ZL 3 - S3 a wire suspension kit with a maximum length of 1.5 m to hang square light 0,2
fixtures including a 3-core supply cable (a steel wire with a keyhole hanging
bracket and a ceiling hook – 4 pcs, M5 bolt with a fan disc washer – 4pcs, supply
cable, ceiling rose, three-pole terminal block)
101495 ZL 3 - S5 a wire suspension kit with a maximum length of 1.5 m to hang square light 0,2
fixtures including a 5-core supply cable (a steel wire with a keyhole hanging
bracket and a ceiling hook – 4 pcs, M5 bolt with a fan disc washer – 4pcs, supply
cable, ceiling rose, five-pole terminal block)

CZECH LIGHT FITTINGS 249

SB LED

INTERIOR
ALUMINUM
WALL/CEILING-MOUNTED
 PRODUCT OVERVIEW

SB LED – interior aluminium LED fixture

SB LED
page 252

IP40 SB LED
page 252

CZECH LIGHT FITTINGS 251

 SB LED

… indoor.

USE ADVANTAGES
The luminaire is an excellent choice for sanitary • Light fitting protection IP20
rooms, toilets, kitchen units, wall units, dressing • Maximum ambient temperature up to ta = 35 °C
rooms, worktops and shop windows. • Integrated switch in side plastic cover
• Packaging: white cover, scratch protection
• Sliding mounting spacers

up to CRI
220-240 V
LED >80
35ºC

252
 SB LED

SB LED
TECHNICAL DESCRIPTION
• Light fitting protection: IP20 • MacAdam = 3 SDCM
• Maximum ambient temperature up to ta = 35 °C • The watt and lumen values can, in accordance
• Diffuser: translucent polycarbonate (PC), with valid standards, vary by ± 7,5 %
UV stable, impact-resistant • CRI > 80: 3000, 4000 K
• Body: aluminium profile, white (RAL 9003) • Sliding spacers (PA-GF)
• Terminal block: screwed, three-poles
• Side cover: white, plastic (ABS)
• Integrated switch in side plastic cover
• Electric equipment: LED modules, current
driver
• Maximum system efficacy: 145 lm/W

SB LED 5ft
150° 180° 150°

38
120° 120°

90° 90°

67
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Luminous flux Power System Net

A D
Code Type temperature of LED modules of light fitting consumption efficacy weight
[mm] [mm]
[°C] [lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 35 °C - body: aluminum profile of white color - diffuser translucent polycarbonate
22415 SB LED 1.1ft 1100/840 35 1190 1080 9 120 0,4 360 230
22425 SB LED 1.2ft 2200/840 35 2340 2130 15 142 0,6 590 460
22435 SB LED 1.4ft 4400/840 35 4660 4250 30 142 1 1150 1020
22445 SB LED 1.5ft 5500/840 35 5900 5360 37 145 1,2 1430 1300

LIGHT FITTING ATTACHMENT

Directly to a ceiling or a wall with the use of screws

CZECH LIGHT FITTINGS 253

LYRA

INDOOR
PLASTIC
SURFACE-MOUNTED
 PRODUCT OVERVIEW

LYRA – indoor plastic LED light fitting

LYRA
page 256

IP40 LYRA
page 256

CZECH LIGHT FITTINGS 255

 LYRA

… fashionable for every interior.

USE ADVANTAGES
LYRA is round LED wall and ceiling – mounted • Light fitting protection IP54
fashionable luminaire for every interior. • Temperature resistance from ta -10 to 35 °C
• Lifetime: 50 000 hours / L80B50
It is perfect solution for rezidental zones, corri- • High mechanical resistence: IK10
dors, lounges, hotels, restaurants and entrance
areas.

up to up to
220-240 V
LED
-10ºC 35ºC

256
 LYRA

LYRA
TECHNICAL DESCRIPTION
• Light fitting protection: IP54 • The values stated for power consumption and
• Maximum ambient temperature: 35 °C luminous flux are in a tolerance of + - 7,5%
• Lifetime: 50 000 hours / L80B50
• Maximum light fitting efficiency: 103 lm/W
• CRI > 80: 4000 K
• CRI > 80: 3000 K
• Diffuser: translucent polycarbonate
• Body: polycarbonate
• Light source body: polycarbonate
• Electronic equipment: LED modules, fixed
output driver

LYRA 1500
150° 180° 150°

120° 120°
43

90° 90°

200
C0 60° 60°

C90
30° 0° 30°

Max. ambient Luminous flux Power System Net A D

Code Type temperature of light fitting consumption efficacy weight
[kg] [mm] [mm]
[°C] [lm] [W] [lm/W]
For ambient temperature max. ta = 35 °C - body: polycarbonate - diffuser: translucent polycarbonate
41001 LYRA 1500/840 35 1550 15 103 0,6 200 43
41002 LYRA 1500/830 35 1500 15 100 0,6 200 43

LIGHT FITTING ATTACHMENT AND ITS DETAILED VIEW

Directly to a ceiling or a wall with the use of screws

CZECH LIGHT FITTINGS 257

BELTR LED

INDOOR
PLASTIC
SURFACE-MOUNTED
BATTEN
 PRODUCT OVERVIEW

BELTR LED – indoor plastic LED light fitting

BELTR LED
page 260

IP40 BELTR LED

page 260

BELTR LED TUBE

page 263

IP40 BELTR LED TUBE

page 263

BELTR LED
ACCESSORIES
page 266

BELTR LED
ACCESSORIES
page 266

CZECH LIGHT FITTINGS 259

 BELTR LED

... indoor, plastic, surface-mounted, batten.

USE ADVANTAGES
The light fitting is suitable for offices, hallways, • Light fitting protection IP40 •S  tandard model - CRI > 80: 4000 K
school interiors, libraries, lecture rooms, sani- • Maximum ambient temperature up to ta = 35 °C •A  t request CRI > 80: 3000 K, 5000 K, 6500 K,
tary rooms, hospitals and passenger terminals. • Lifetime: 50,000 hours / L90B10 CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
• Diffuser: translucent polycarbonate (PC) = high • It can be delivered in dimmable or emergency
Thanks to its high luminous efficiency and low mechanical resistance version
electricity consumption it is a suitable replace- • Body: steel sheet, white colour (RAL 9003) • Possibility to through-wire individual light fit-
ment for light fittings with fluorescent tubes. • Up to 45 % lower electricity consumption when tings to row with the use of external terminal
compared to tubes T5 blocks
• In DALI version possibility of constant luminous •C  ertification: ENEC, CB
flux for whole lifetime (CLO)

up to up to

35ºC
LED
-25ºC

CRI
220-240 V DALI L 90
>80 B 10

260
 BELTR LED

BELTR LED
TECHNICAL DESCRIPTION
• Light fitting protection: IP40 •B  ody: steel sheet, white colour (RAL 9003)
• Maximum ambient temperature: ta = 35  °C, • Side covers: white (ABS), UV stable, with offsets
Maximum ambient temperature: ta = 0-25 °C allowing fixing the light fitting with enclosed
(version with emergency back-up source for screws M4 against tampering
1 hour; M1h) •C  able gland: white, rubber
• Maximum system efficacy: 137 lm/W • Terminal block: screwless, three-pole (basic
• The watt and lumen values can vary by ± 7,5 % version)
• Standard model - CRI > 80: 4000 K • Electric equipment: LED modules, current driv-
• MacAdam = 3 SDCM er or current driver DALI
• Lifetime: 50,000 hours / L90B10
• Diffuser: translucent polycarbonate (PC), UV
stable, impact-resistant

A BELTR LED 1.4ft BETLR LED 2.4ft

150° 180° 150° 150° 180° 150°
D 91
120° 120° 120° 120°

82
90° 90° 90° 90°
A
D 146 C0 60°
60° 60° 60°

C90

58
30° 0° 30° 30° 0° 30°

Luminous flux Luminous flux Power System Net A D

Code Type of LED modules of light fitting consumption efficacy weight
[kg] [mm] [mm]
[lm] [lm] [W] [lm/W]
For ambient temperature ta = 35 °C - body: steel sheet, white colour - diffuser: translucent polycarbonate
54110 BELTR LED 1.2ft 1300/840 1320 1070 8 134 0,8 610 500
54120 BELTR LED 1.2ft 1600/840 1580 1280 10 128 0,8 610 500
54180 BELTR LED 1.4ft 2600/840 2580 2090 16 131 1,5 1170 1000
54140 BELTR LED 1.4ft 3200/840 3110 2520 20 126 1,4 1170 1000
54190 BELTR LED 1.5ft 3250/840 3240 2620 20 131 1,9 1450 1000
54150 BELTR LED 1.5ft 4000/840 3880 3140 24 131 1,8 1450 1000

54210 BELTR LED 2.2ft 2600/840 2630 2130 16 133 1,5 610 500
54220 BELTR LED 2.2ft 3200/840 3110 2520 19 133 1,3 610 500
54280 BELTR LED 2.4ft 5200/840 5150 4170 31 135 2,4 1170 1000
54240 BELTR LED 2.4ft 6400/840 6260 5070 37 137 2,3 1170 1000
54290 BELTR LED 2.5ft 6500/840 6380 5170 38 136 3,1 1450 1000
54250 BELTR LED 2.5ft 8000/840 7750 6280 46 137 2,9 1450 1000

54120 BELTR LED 1.2ft 1600/840 = suitable replacement for T8 fl. tube light fitting BELTR 118 - 1 × 18 W
54140 BELTR LED 1.4ft 3200/840 = suitable replacement for T8 fl. tube light fitting BELTR 136 - 1 × 36 W
54150 BELTR LED 1.5ft 4000/840 = suitable replacement for T8 fl. tube light fitting BELTR 158 - 1 × 58 W
54220 BELTR LED 2.2ft 3200/840 = suitable replacement for T8 fl. tube light fitting BELTR 218 - 2 × 18 W
54240 BELTR LED 2.4ft 6400/840 = suitable replacement for T8 fl. tube light fitting BELTR 236 - 2 × 36 W
54250 BELTR LED 2.5ft 8000/840 = suitable replacement for T8 fl. tube light fitting BELTR 258 - 2 × 58 W

BELTR LED Diffuser made of translucent polycarbonate

Code Type M1h DALI DALI M1h Sensor

54110 BELTR LED 1.2ft 1300/840 x 54113 x x
54120 BELTR LED 1.2ft 1600/840 x 54123 x x
54180 BELTR LED 1.4ft 2600/840 54184 54183 54187 x
54140 BELTR LED 1.4ft 3200/840 54144 54143 54147 x
54190 BELTR LED 1.5ft 3250/840 54194 54193 54197 x
54150 BELTR LED 1.5ft 4000/840 54154 54153 54157 x

54210 BELTR LED 2.2ft 2600/840 x 54213 x 54218

54220 BELTR LED 2.2ft 3200/840 x 54223 x 54228
54280 BELTR LED 2.4ft 5200/840 54284 54283 54287 54288
54240 BELTR LED 2.4ft 6400/840 54244 54243 54247 54248
54290 BELTR LED 2.5ft 6500/840 54294 54293 54297 54298
54250 BELTR LED 2.5ft 8000/840 54254 54253 54257 54258

Example of type marking: 54243 = BELTR LED 2.4ft 6400/840 DALI M1h

CZECH LIGHT FITTINGS 261

 BELTR LED

Diffuser made of translucent polycarbonate,

BELTR LED S3F through-wiring with the use of external terminal blocks Wieland (S) GST15i5

Code Type M1h DALI DALI M1h Senzor

54410 BELTR LED 2.2ft S3F 2600/840 x 54413 X 54418
54420 BELTR LED 2.2ft S3F 3200/840 x 54423 x 54428
54480 BELTR LED 2.4ft S3F 5200/840 54484 54483 x 54488
54440 BELTR LED 2.4ft S3F 6400/840 54444 54443 x 54448
54490 BELTR LED 2.5ft S3F 6500/840 54494 54493 x 54498
54450 BELTR LED 2.5ft S3F 8000/840 54454 54453 x 54458

Example of type marking: 54453 = BELTR LED 2.5ft S3F 8000/840 DALI

LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)

LIGHT FITTING ATTACHMENT

Directly to a ceiling or a wall with the use of screws

LIGHT FITTING DETAILED VIEW

BELTR LED

262
BELTR LED TUBE

... indoor, plastic, surface-mounted, batten.

USE ADVANTAGES
The light fitting is suitable for offices, hallways, •L  ight fitting protection IP40
school interiors, libraries, lecture rooms, sani- • Maximum ambient temperature up to ta = 35 °C
tary rooms, hospitals and passenger terminals. • Diffuser: transparent polycarbonate = high me-
chanical resistance
Thanks to its high luminous efficiency and low • Body: steel sheet, white colour (RAL 9003)
electricity consumption it is a suitable replace- • Up to 45 % lower electricity consumption when
ment for light fittings with fluorescent tubes. compared to tubes T5
• It can be delivered in emergency version

up to
LED
35ºC

220-240 V

CZECH LIGHT FITTINGS 263

 BELTR LED TUBE

BELTR LED TUBE

TECHNICAL DESCRIPTION
• Light fitting protection: IP40 •B  ody: steel sheet, white colour (RAL 9003)
• Maximum ambient temperature: ta = 35  °C, •S  ide covers: white (ABS), UV stable
Maximum ambient temperature: ta = 0-25 °C •C  able gland: white, rubber
(version with emergency back-up source for • Terminal block: screwless, three-pole (basic
1 hour; M1h) version)
• Maximum system efficacy: 117 lm/W • Electric equipment: for LED tubes Osram Sub-
• MacAdam = 3 SDCM stiTUBE T8 EM Value 4000 K, 6500 K; lamphold-
• The watt and lumen values can vary by ± 7,5 % er G13
• Diffuser: transparent polycarbonate, UV stable,
impact-resistant

A BELTR LED TUBE 1x120 BELTR LED TUBE 2x120

150° 180° 150° 150° 180° 150°
D 91
120° 120° 120° 120°

82
90° 90° 90° 90°
A
D 146 C0 60°
60° 60° 60°

C90

58
30° 0° 30° 30° 0° 30°

Luminous flux Luminous flux Power System Net A D

Code Type of LED modules of light fitting consumption efficacy weight
[kg] [mm] [mm]
[lm] [lm] [W] [lm/W]
For ambient temperature ta = 35 °C - body: steel sheet, white colour - diffuser: translucent polycarbonate - lampholder G13
37110 BELTR LED TUBE 1x60 PC 800* 770 6,6 117 0,5 635 450
37120 BELTR LED TUBE 1x120 PC 1800* 1730 15 115 0,9 1245 900
37130 BELTR LED TUBE 1x150 PC 2200* 2120 18,3 116 1,1 1545 900
37140 BELTR LED TUBE 2x60 PC 1600* 1470 13,2 111 0,8 635 450
37150 BELTR LED TUBE 2x120 PC 3600* 3320 30 111 1,4 1245 900
37160 BELTR LED TUBE 2x150 PC 4400* 4060 36,6 111 1,7 1545 900

* - total luminous flux of the light fitting with Osram SubstiTUBE T8 EM Value sources

BELTR LED TUBE For LED tubes Osram SubstiTUBE T8 EM Value

Code Type 1F 3F M1h M3h

37110 BELTR LED TUBE 1x60 x x x x
37120 BELTR LED TUBE 1x120 x x x x
37130 BELTR LED TUBE 1x150 x x x x
37140 BELTR LED TUBE 2x60 x x 37144 37145
37150 BELTR LED TUBE 2x120 x x 37154 37155
37160 BELTR LED TUBE 2x150 x x 37164 37165

Example of type marking: 37164 = BELTR LED TUBE 2x150 M1h

LEGEND
1F – 1 phase wiring cables for through-wiring
3F – 3 phase wiring cables for through-wiring
M1h – emergency back-up source with operating time of 1 hour (SA) for both permanent and emergency illumination
M3h – emergency back-up source with operating time of 3 hours (SA) for both permanent and emergency illumination
Batteries must be formatted before their putting into operation. Assembly instructions must be observed at installation.

264
 BELTR LED TUBE

LIGHT FITTING ATTACHMENT

Directly to a ceiling or a wall with the use of screws

LIGHT FITTING DETAILED VIEW

BELTR LED TUBE

CZECH LIGHT FITTINGS 265

 BELTR LED accessories

OM – protective grid
The metal grid protects the light fitting against mechanical damage and unauthorised handling. It is attached to the surface with the use of screws.
The surface is treated with the RAL 9003 powder-coated colour.

Weight
Code Type Description
[kg]
11941 OM 218 protective grid for types 218, 214/224, 2.2ft (700 × 220 × 130 mm) 1,0
11942 OM 236 protective grid for types 236, 228/254, 2.4ft (1300 × 220 × 130 mm) 1,7
11943 OM 258 protective grid for types 258, 235/249/280, 2.5ft (1600 × 220 × 130 mm) 2,0

Connection cables and connectors

Weight
Code Type Description
[kg]
27401 GST 15i5-S1 5-pole wiring terminal block 0,1

Weight
Code Type Description
[kg]
27421 GST 15i5-S21 interconnecting cable 5x1.5 mm2 - female/male L=1m 0,2
27422 GST 15i5-S22 interconnecting cable 5x1.5 mm2 - female/male L=2m 0,3
27423 GST 15i5-S23 interconnecting cable 5x1.5 mm2 - female/male L=3m 0,4
27424 GST 15i5-S24 interconnecting cable 5x1.5 mm2 - female/male L=4m 0,5
27425 GST 15i5-S25 interconnecting cable 5x1.5 mm2 - female/male L=5m 0,6
27426 GST 15i5-S26 interconnecting cable 5x1.5 mm2 - female/male L=6m 0,7
27427 GST 15i5-S27 interconnecting cable 5x1.5 mm2 - female/male L=7m 0,8
27428 GST 15i5-S28 interconnecting cable 5x1.5 mm2 - female/male L=8m 0,9

Weight
Code Type Description
[kg]
27431 GST 15i5-S31 connecting cable 5x1.5 mm2 - male/free end L=1m 0,2
27432 GST 15i5-S32 connecting cable 5x1.5 mm2 - male/free end L=2m 0,3
27433 GST 15i5-S33 connecting cable 5x1.5 mm2 - male/free end L=3m 0,4
27434 GST 15i5-S34 connecting cable 5x1.5 mm2 - male/free end L=4m 0,5
27435 GST 15i5-S35 connecting cable 5x1.5 mm2 - male/free end L=5m 0,6
27436 GST 15i5-S36 connecting cable 5x1.5 mm2 - male/free end L=6m 0,7
27437 GST 15i5-S37 connecting cable 5x1.5 mm2 - male/free end L=7m 0,8
27438 GST 15i5-S38 connecting cable 5x1.5 mm2 - male/free end L=8m 0,9

Weight
Code Type Description
[kg]
27441 GST 15i5-S41 connecting cable 5x1.5 mm2 - female/free end L=1m 0,2
27442 GST 15i5-S42 connecting cable 5x1.5 mm2 - female/free end L=2m 0,3
27443 GST 15i5-S43 connecting cable 5x1.5 mm2 - female/free end L=3m 0,4
27444 GST 15i5-S44 connecting cable 5x1.5 mm2 - female/free end L=4m 0,5
27445 GST 15i5-S45 connecting cable 5x1.5 mm2 - female/free end L=5m 0,6
27446 GST 15i5-S46 connecting cable 5x1.5 mm2 - female/free end L=6m 0,7
27447 GST 15i5-S47 connecting cable 5x1.5 mm2 - female/free end L=7m 0,8
27448 GST 15i5-S48 connecting cable 5x1.5 mm2 - female/free end L=8m 0,9

266
CZECH LIGHT FITTINGS 267
NAOS

INDOOR
METAL
 PRODUCT OVERVIEW

NAOS – indoor metal LED light fitting

NAOS
page 270

IP20 NAOS
page 270

NAOS AS
page 273

IP20 NAOS AS
page 273

NAOS SQUARE
page 275

IP20 NAOS SQUARE

page 275

NAOS MPR
page 277

IP20 NAOS MPR

page 277

NAOS SQUARE MPR

page 280

IP20 NAOS SQUARE MPR

page 280

NAOS
ACCESSORIES
page 282

NAOS
ACCESSORIES
page 282

CZECH LIGHT FITTINGS 269

 NAOS

… indoor, metal.

USE ADVANTAGES
Advanced lamp with low profile of total height of • Light fitting protection IP20 •S  tandard model - CRI > 80: 4000 K
34 mm only. • Maximum ambient temperature up to ta = 35 °C •A  t request CRI > 80: 3000 K, 5000 K, 6500 K,
• Lifetime: 50,000 hours / L90B10 CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
Body of the lamp is made of painted metal sheet • Diffuser: acryl (PMMA) sandblasted on both • It can be delivered in dimmable or emergency
and it is supplemented with acryl diffuser sand- sides version
blasted on both sides. • Body: steel sheet, white (RAL 9003) or silver •C  ertification: ESČ
(RAL 9006) colour
The light fitting is suitable for offices, hallways, • Up to 45 % lower electricity consumption when
school interiors, libraries, lecture rooms, sani- compared to tubes T5
tary rooms, hospitals and passenger terminals. • In DALI version possibility of constant luminous
flux for whole lifetime (CLO)

up to up to
LED
35ºC -25ºC

CRI
220-240 V DALI L 90
>80 B 10

270
 NAOS

NAOS
TECHNICAL DESCRIPTION
• Light fitting protection: IP20 • Body: steel sheet, white (RAL 9003) or silver
• Maximum ambient temperature: ta = 35  °C, (RAL 9006) colour
Maximum ambient temperature: ta = 0-25 °C •C  able gland: rubber (SBS), white
(version with emergency back-up source for •T  erminal block: screwless, five-pole
1 hour; M1h) • Securing of the cover: by the means of magnets
• Maximum system efficacy: 141 lm/W • Electric equipment: LED modules, current driv-
• The watt and lumen values can vary by ± 7,5 % er or current driver DALI
• Standard model - CRI > 80: 4000 K
• MacAdam = 3 SDCM
• Lifetime: 50,000 hours / L90B10
• Diffuser: acryl (PMMA) sandblasted on both
sides

NAOS 1.5ft NAOS 2.5ft

150° 180° 150° 150° 180° 150°

A 195 145 120° 120° 120° 120°

150 100
D
90° 90° 90° 90°

34
60° 60°
C0 60° 60°

C90
30° 0° 30° 30° 0° 30°

Luminous flux Luminous flux Power System Net A D

Code Type of LED modules of light fitting consumption efficacy weight
[kg] [mm] [mm]
[lm] [lm] [W] [lm/W]
For ambient temperature ta = 35 °C - body: steel sheet, white colour - diffuser made of sandblasted opalised acryl
95010 NAOS 1.2ft 1300/840 1320 1070 8 134 2,0 620 470
95020 NAOS 1.2ft 1600/840 1580 1280 10 128 2,0 620 470
95040 NAOS 1.4ft 2600/840 2580 2090 16 131 3,7 1180 1030
95050 NAOS 1.4ft 3200/840 3110 2520 20 126 3,7 1180 1030
95070 NAOS 1.5ft 3250/840 3240 2620 20 131 4,4 1460 1310
95080 NAOS 1.5ft 4000/840 3880 3140 24 131 4,4 1460 1310
95100 NAOS 2.2ft 2600/840 2630 2180 16 136 2,6 620 470
95110 NAOS 2.2ft 3200/840 3110 2580 19 136 2,6 620 470
95130 NAOS 2.4ft 5200/840 5150 4270 31 138 4,6 1180 1030
95140 NAOS 2.4ft 6400/840 6260 5200 37 141 4,6 1180 1030
95160 NAOS 2.5ft 6500/840 6380 5300 38 139 5,5 1460 1310
95170 NAOS 2.5ft 8000/840 7750 6430 46 140 5,5 1460 1310

95050 NAOS 1.4ft 3200/840 = suitable replacement for T5 fl. tube light fitting LUXOR 154 OP ET5 – 1 × 54 W
95140 NAOS 2.4ft 6400/840 = suitable replacement for T5 fl. tube light fitting LUXOR 254 OP ET5 – 2 × 54 W

NAOS Diffuser made from sandblasted opalised acryl, white colour

Code Type M1h DALI DALI M1h

95010 NAOS 1.2ft 1300/840 95013 95015 95016
95020 NAOS 1.2ft 1600/840 95023 95025 95026
95040 NAOS 1.4ft 2600/840 95043 95045 95046
95050 NAOS 1.4ft 3200/840 95053 95055 95056
95070 NAOS 1.5ft 3250/840 95073 95075 95076
95080 NAOS 1.5ft 4000/840 95083 95085 95086
95100 NAOS 2.2ft 2600/840 95103 95105 95106
95110 NAOS 2.2ft 3200/840 95113 95115 95116
95130 NAOS 2.4ft 5200/840 95133 95135 95136
95140 NAOS 2.4ft 6400/840 95143 95145 95146
95160 NAOS 2.5ft 6500/840 95163 95165 95166
95170 NAOS 2.5ft 8000/840 95173 95175 95176

Example of type marking: 95146 = NAOS 2.4ft 6400/840 DALI M1h

CZECH LIGHT FITTINGS 271

 NAOS

NAOS s Diffuser made from sandblasted opalised acryl, silver colour (s)

Code Type M1h DALI DALI M1h

95310 NAOS 1.2ft 1300/840 s 95313 95315 95316
95320 NAOS 1.2ft 1600/840 s 95323 95325 95326
95340 NAOS 1.4ft 2600/840 s 95343 95345 95346
95350 NAOS 1.4ft 3200/840 s 95353 95355 95356
95370 NAOS 1.5ft 3250/840 s 95373 95375 95376
95380 NAOS 1.5ft 4000/840 s 95383 95385 95386
95400 NAOS 2.2ft 2600/840 s 95403 95405 95406
95410 NAOS 2.2ft 3200/840 s 95413 95415 95416
95430 NAOS 2.4ft 5200/840 s 95433 95435 95436
95440 NAOS 2.4ft 6400/840 s 95443 95445 95446
95460 NAOS 2.5ft 6500/840 s 95463 95465 95466
95470 NAOS 2.5ft 8000/840 s 95473 95475 95476

Example of type marking: 95413 = NAOS 2.2ft 3200/840 M1h s

LEGEND
s – silver colour RAL 9006 M1h – emergency back-up source with operating time of 1 hour (SA) for both permanent and
DALI – version with electronic and digitally dimmed ballast module op- emergency illumination
erated via DALI protocol Batteries must be formatted before their putting into operation. Assembly instructions must be
observed at installation.

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws
b) By suspending to a ceiling with the use of wire-cord suspensions

LIGHT FITTING DETAILED VIEW

NAOS

272
NAOS AS NEW

… indoor, metal, asymmetrical.

USE ADVANTAGES
Advanced lamp with low profile of total height of • Light fitting protection IP20 • It can be delivered in dimmable version
34 mm only. • Maximum ambient temperature up to ta = 35 °C •C  ertification: ESČ
• Lifetime: 50,000 hours / L90B10
Made of painted metal, the luminaire body is • Diffusor: asymmetrical acrylic (PMMA)
complemented by an asymmetrical diffusor • Body: steel sheet, white (RAL 9003) or silver
made of acrylic. (RAL 9006) colour
• Up to 45 % lower electricity consumption when
The fixture is a perfect choice for indoor ar- compared to tubes T5
eas, such as schools (including as a dedicated • In DALI version possibility of constant luminous
luminaire placed above the board to highlight flux for whole lifetime (CLO)
the area), libraries, auditoriums and exhibition • Standard model - CRI > 80: 4000 K
spaces.

up to up to
LED
35ºC -25ºC

CRI
220-240 V DALI L 90
>80 B 10

CZECH LIGHT FITTINGS 273

 NAOS AS

NAOS AS
TECHNICAL DESCRIPTION
• Light fitting protection: IP20 • Securing of the cover: by the means of magnets
• Maximum ambient temperature: ta = 35 °C • Electric equipment: LED modules, current driv-
• Maximum system efficacy: 140 lm/W er or current driver DALI
• The watt and lumen values can vary by ± 7,5 %
• Standard model - CRI > 80: 4000 K
• MacAdam = 3 SDCM
• Lifetime: 50,000 hours / L90B10
• Diffusor: asymmetrical acrylic (PMMA)
• Body: steel sheet, white (RAL 9003) or silver
(RAL 9006) colour
• Cable gland: rubber (SBS), white
• Terminal block: screwless, five-pole

NAOS AS 1.4ft
150° 180° 150°

A 101 120° 120°

D 60
90° 90°

34
C0
60° 60°

C90
30° 0° 30°

Luminous flux Luminous flux Power System Net A D

Code Type of LED modules of light fitting consumption efficacy weight
[kg] [mm] [mm]
[lm] [lm] [W] [lm/W]
For ambient temperature ta = 35 °C - body: steel sheet, white colour - diffusor: asymmetrical acrylic
10192 NAOS AS 1.4ft 6400/840 6400 5750 39 140 2,9 1218 1030

NAOS AS Asymmetrical acrylic diffusor, white colour

Code Type DALI

10192 NAOS AS 1.4ft 6400/840 10198

NAOS AS s Asymmetrical acrylic diffusor, silver colour (s)

Code Type DALI

10455 NAOS AS s 1.4ft 6400/840 10492

LEGEND
s – silver colour RAL 9006 DALI – version with electronic and digitally dimmed ballast module operated via DALI protocol

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws
b) By suspending to a ceiling with the use of wire-cord suspensions

LIGHT FITTING DETAILED VIEW

NAOS AS

274
NAOS SQUARE

… indoor, square, metal.

USE ADVANTAGES
Advanced lamp with low profile of total height of • Light fitting protection IP20 •S  tandard model - CRI > 80: 4000 K
34 mm only. • Maximum ambient temperature up to ta = 35 °C •A  t request CRI > 80: 3000 K, 5000 K, 6500 K,
• Lifetime: 50,000 hours / L90B10 CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
Body of the lamp is made of painted metal sheet • Diffuser: acryl (PMMA) sandblasted on both • It can be delivered in dimmable or emergency
and it is supplemented with acryl diffuser sand- sides version
blasted on both sides. • Body: steel sheet, white (RAL 9003) or silver •C  ertification: ESČ
(RAL 9006) colour
The light fitting is suitable for offices, hallways, • Up to 45 % lower electricity consumption when
school interiors, libraries, lecture rooms, sani- compared to tubes T5
tary rooms, hospitals and passenger terminals. • In DALI version possibility of constant luminous
flux for whole lifetime (CLO)

up to up to
LED
35ºC -25ºC

CRI
220-240 V DALI L 90
>80 B 10

CZECH LIGHT FITTINGS 275

 NAOS SQUARE

NAOS SQUARE
TECHNICAL DESCRIPTION
• Light fitting protection: IP20 • Body: steel sheet, white (RAL 9003) or silver
• Maximum ambient temperature: ta = 35  °C, (RAL 9006) colour
Maximum ambient temperature: ta = 0-25 °C •C  able gland: rubber (SBS), white
(version with emergency back-up source for •T  erminal block: screwless, five-pole
1 or 3 hours; M1h, M3h) • Securing of the cover: by the means of magnets
• Maximum system efficacy: 141 lm/W • Electric equipment: LED modules, current driv-
• The watt and lumen values can vary by ± 7,5 % er or current driver DALI
• Standard model - CRI > 80: 4000 K
• MacAdam = 3 SDCM
• Lifetime: 50,000 hours / L90B10
• Diffuser: acryl (PMMA) sandblasted on both
sides

18 NAOS SQUARE
100

150° 180° 150°

120° 120°
34

555
448

595

90° 90°
595

C0 60° 60°

C90
30° 0° 30°

Luminous flux Luminous flux Power System Net

Code Type of LED modules of light fitting consumption efficacy weight
[lm] [lm] [W] [lm/W] [kg]
For ambient temperature ta = 35 °C - body: steel sheet, white colour - diffuser made of sandblasted opalised acryl
95710 NAOS SQUARE 5200/840 5150 4270 31 138 5,7
95720 NAOS SQUARE 6400/840 6260 5200 37 141 5,7

95710 NAOS SQUARE 5200/840 = suitable replacement surface mounted or recessed fluorescent light fittings 4 ×18 W a 4 ×14 W

NAOS SQUARE Diffuser made from sandblasted opalised acryl, white colour

Code Type M1h M3h DALI DALI M1h DALI M3h

95710 NAOS SQUARE 5200/840 95713 95714 95715 95716 95717
95720 NAOS SQUARE 6400/840 95723 95724 95725 95726 95727

NAOS SQUARE s Diffuser made from sandblasted opalised acryl, silver colour (s)

Code Type M1h M3h DALI DALI M1h DALI M3h

95750 NAOS SQUARE 5200/840 s 95753 95754 95755 95756 95757
95760 NAOS SQUARE 6400/840 s 95763 95764 95765 95766 95767

Example of type marking: 95756 = NAOS SQUARE 5200/840 DALI M1h s

LEGEND
s – silver colour RAL 9006 M1h – emergency back-up source with operating time of 1 hour (SA) for both permanent and
DALI – version with electronic and digitally dimmed ballast module op- emergency illumination
erated via DALI protocol Batteries must be formatted before their putting into operation. Assembly instructions must be
observed at installation.

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws
b) By suspending to a ceiling with the use of wire-cord suspensions
LIGHT FITTING DETAILED VIEW
c) Installation into 600 × 600 mm grid lower ceiling NAOS SQUARE

276
NAOS MPR

… indoor, metal, with low UGR.

USE ADVANTAGES
Advanced lamp with low profile of total height • Light fitting protection IP20 •S  tandard model - CRI > 80: 4000 K
of 34 mm only. • Maximum ambient temperature up to ta = 35 °C •A  t request CRI > 80: 3000 K, 5000 K, 6500 K,
• Lifetime: 50,000 hours / L90B10 CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
The light fitting is suitable for offices, hallways, • Diffuser: multi-layer micropyramid optics • It can be delivered in dimmable or emergency
school interiors, libraries, lecture rooms, sani- (MPR) with UGR < 19 version
tary rooms, hospitals and passenger terminals. • Body: steel sheet, white (RAL 9003) or silver •C  ertification: ESČ
(RAL 9006) colour
• Up to 45 % lower electricity consumption when
compared to tubes T5
• In DALI version possibility of constant luminous
flux for whole lifetime (CLO)

up to up to
LED
35ºC -25ºC

CRI
220-240 V DALI L 90
>80 B 10

CZECH LIGHT FITTINGS 277

 NAOS MPR

NAOS MPR
TECHNICAL DESCRIPTION
• Light fitting protection: IP20 • Body: steel sheet, white (RAL 9003) or silver
• Maximum ambient temperature: ta = 35  °C, (RAL 9006) colour
Maximum ambient temperature: ta = 0-25 °C •C  able gland: rubber (SBS), white
(version with emergency back-up source for •T  erminal block: screwless, five-pole
1 hour; M1h) • Securing of the cover: by the means of magnets
• Maximum system efficacy: 131 lm/W • Electric equipment: LED modules, current driv-
• The watt and lumen values can vary by ± 7,5 % er or current driver DALI
• Standard model - CRI > 80: 4000 K
• MacAdam = 3 SDCM
• Lifetime: 50,000 hours / L90B10
• Diffuser: multi-layer micropyramid optics MPR
for light distribution without glare according to
EN 12464-1 with UGR < 19

NAOS 2.4ft MPR NAOS 2.5ft MPR

150° 180° 150° 150° 180° 150°

A 320 120° 120° 120° 120°

D 275
90° 90° 90° 90°

34
60° 60°
C0 60° 60°

C90
30° 0° 30° 30° 0° 30°

Luminous flux Luminous flux Power System Net A D

Code Type of LED modules of light fitting consumption efficacy weight
[kg] [mm] [mm]
[lm] [lm] [W] [lm/W]
For environment temperature ta = 35 °C - body made of white steel sheet - diffuser made of multilayer micropyramid optics
95510 NAOS MPR 2.4ft 5200/840 5150 4020 31 130 6,1 1180 1030
95520 NAOS MPR 2.5ft 6500/840 6380 4980 38 131 7,6 1460 1310

95510 NAOS MPR 2.4ft 5200/840 = suitable replacement for T5 fl. tube light fitting LUXOR 235 OP ET5 – 2 × 35 W
95520 NAOS MPR 2.4ft 6500/840 = suitable replacement for T5 fl. tube light fitting LUXOR 249 OP ET5 – 2 × 49 W

NAOS MPR Diffuser with multilayer micropyramid optics, white colour

Code Type M1h DALI DALI M1h

95510 NAOS MPR 2.4ft 5200/840 95513 95515 95516
95520 NAOS MPR 2.5ft 6500/840 95523 95525 95526

NAOS MPR s Diffuser with multilayer micropyramid optics, silver colour (s)

Code Type M1h DALI DALI M1h

95610 NAOS MPR 2.4ft 5200/840 s 95613 95615 95616
95620 NAOS MPR 2.5ft 6500/840 s 95623 95625 95626
Example of type marking: 95626 = NAOS MPR 2.5ft 6500/840 DALI M1h

LEGEND
s – silver colour RAL 9006 M1h – emergency back-up source with operating time of 1 hour (SA) for both permanent and
DALI – version with electronic and digitally dimmed ballast module op- emergency illumination
erated via DALI protocol Batteries must be formatted before their putting into operation. Assembly instructions must be
observed at installation.

278
 NAOS MPR

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws
b) By suspending to a ceiling with the use of wire-cord suspensions

LIGHT FITTING DETAILED VIEW

NAOS MPR

CZECH LIGHT FITTINGS 279

 NAOS SQUARE MPR

… indoor, square, metal, with low UGR.

USE ADVANTAGES
Advanced lamp with low profile of total height • Light fitting protection IP20 •S  tandard model - CRI > 80: 4000 K
of 34 mm only. • Maximum ambient temperature up to ta = 35 °C •A  t request CRI > 80: 3000 K, 5000 K, 6500 K,
• Lifetime: 50,000 hours / L90B10 CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
The light fitting is suitable for offices, hallways, • Diffuser: multi-layer micropyramid optics • It can be delivered in dimmable or emergency
school interiors, libraries, lecture rooms, sani- (MPR) with UGR < 19 version
tary rooms, hospitals and passenger terminals. • Body: steel sheet, white (RAL 9003) or silver •C  ertification: ESČ
(RAL 9006) colour
• Up to 45 % lower electricity consumption when
compared to tubes T5
• In DALI version possibility of constant luminous
flux for whole lifetime (CLO)

up to up to
LED
35ºC -25ºC

CRI
220-240 V DALI L 90
>80 B 10

280
 NAOS SQUARE MPR

NAOS SQUARE MPR

TECHNICAL DESCRIPTION
• Light fitting protection: IP20 • Body: steel sheet, white (RAL 9003) or silver
• Maximum ambient temperature: ta = 35  °C, (RAL 9006) colour
Maximum ambient temperature: ta = 0-25 °C •C  able gland: rubber (SBS), white
(version with emergency back-up source for •T  erminal block: screwless, five-pole
1 or 3 hours; M1h, M3h) • Securing of the cover: by the means of magnets
• Maximum system efficacy: 130 lm/W • Electric equipment: LED modules, current driv-
• The watt and lumen values can vary by ± 7,5 % er or current driver DALI
• Standard model - CRI > 80: 4000 K
• MacAdam = 3 SDCM
• Lifetime: 50,000 hours / L90B10
• Diffuser: multi-layer micropyramid optics MPR
for light distribution without glare according to
EN 12464-1 with UGR < 19

18 NAOS SQUARE MPR

100

150° 180° 150°

120° 120°
34

555
448

595

90° 90°
595

C0 60° 60°

C90
30° 0° 30°

Luminous flux Luminous flux Power System Net

Code Type of LED modules of light fitting consumption efficacy weight
[lm] [lm] [W] [lm/W] [kg]
For environment temperature ta = 35 °C - body made of white steel sheet - diffuser made of multilayer micropyramid optics
95810 NAOS SQUARE MPR 5200/840 5150 4020 31 130 5,7

95810 NAOS SQUARE MPR 5200/840 = suitable replacement surface mounted or recessed fluorescent light fittings 4 ×18 W a 4 ×14 W

NAOS SQUARE MPR Diffuser with multilayer micropyramid optics, white colour

Code Type M1h M3h DALI DALI M1h DALI M3h

95810 NAOS SQUARE MPR 5200/840 95813 95814 95815 95816 95817

NAOS SQUARE MPR s Diffuser with multilayer micropyramid optics, silver colour (s)

Code Type M1h M3h DALI DALI M1h DALI M3h

95850 NAOS SQUARE MPR 5200/840 s 95853 95854 95855 95856 95857

Example of type marking: 95856 = NAOS SQUARE MPR 5200/840 DALI M1h s

LEGEND
s – silver colour RAL 9006 M1h – emergency back-up source with operating time of 1 hour (SA) for both permanent and
DALI – version with electronic and digitally dimmed ballast module op- emergency illumination
erated via DALI protocol Batteries must be formatted before their putting into operation. Assembly instructions must be
observed at installation.

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws
b) By suspending to a ceiling with the use of wire-cord suspensions
LIGHT FITTING DETAILED VIEW
c) Installation into 600 × 600 mm grid lower ceiling NAOS SQUARE MPR

CZECH LIGHT FITTINGS 281

 NAOS accessories

Ceiling suspender kit for NAOS, NAOS AS luminaires

Weight
Code Type Description
[kg]
101344 ZL 1 - S3 a wire suspension kit with a maximum length of 1.5m to hang single-line light 0,2
fixtures (1.2ft, 1.4ft, 1.5ft) including a 3-core supply cable (a steel Y wire with a
keyhole hanging bracket and a span of 150 mm including a ceiling wire holder
clip – 2 pcs, supply cable, ceiling rose, three-pole terminal block)
101458 ZL 1 - S5 a wire suspension kit with a maximum length of 1.5m to hang single-line light 0,2
fixtures (1.2ft, 1.4ft, 1.5ft) including a 5-core supply cable (a steel Y wire with a
keyhole hanging bracket and a span of 150 mm including a ceiling wire holder
clip – 2 pcs, supply cable, ceiling rose, three-pole terminal block)

Weight
Code Type Description
[kg]
101456 ZL 2 - S3 a wire suspension kit with a maximum length of 1.5m to hang double-line light 0,2
fixtures (2.2ft, 2.4ft, 2.5ft) including a 3-core supply cable (a steel Y wire with a
keyhole hanging bracket and a span of 300 mm including a ceiling wire holder
clip – 2 pcs, supply cable, ceiling rose, three-pole terminal block)
101494 ZL 2 - S5 a wire suspension kit with a maximum length of 1.5m to hang double-line light 0,2
fixtures (2.2ft, 2.4ft, 2.5ft) including a 5-core supply cable (a steel Y wire with a
keyhole hanging bracket and a span of 300 mm including a ceiling wire holder
clip – 2 pcs, supply cable, ceiling rose, three-pole terminal block)

Ceiling suspender kit for NAOS MPR luminaires

Weight
Code Type Description
[kg]
101456 ZL 2 - S3 a wire suspension kit with a maximum length of 1.5m to hang double-line light 0,2
fixtures (2.2ft, 2.4ft, 2.5ft) including a 3-core supply cable (a steel Y wire with a
keyhole hanging bracket and a span of 300 mm including a ceiling wire holder
clip – 2 pcs, supply cable, ceiling rose, three-pole terminal block)
101494 ZL 2 - S5 a wire suspension kit with a maximum length of 1.5m to hang double-line light 0,2
fixtures (2.2ft, 2.4ft, 2.5ft) including a 5-core supply cable (a steel Y wire with a
keyhole hanging bracket and a span of 300 mm including a ceiling wire holder
clip – 2 pcs, supply cable, ceiling rose, three-pole terminal block)

Ceiling suspender kit for NAOS SQUARE, NAOS SQUARE MPR luminaires

Weight
Code Type Description
[kg]
101457 ZL 3 - S3 a wire suspension kit with a maximum length of 1.5 m to hang square light 0,2
fixtures including a 3-core supply cable (a steel wire with a keyhole hanging
bracket and a ceiling hook – 4 pcs, M5 bolt with a fan disc washer – 4pcs, supply
cable, ceiling rose, three-pole terminal block)
101495 ZL 3 - S5 a wire suspension kit with a maximum length of 1.5 m to hang square light 0,2
fixtures including a 5-core supply cable (a steel wire with a keyhole hanging
bracket and a ceiling hook – 4 pcs, M5 bolt with a fan disc washer – 4pcs, supply
cable, ceiling rose, five-pole terminal block)

282
MO SLIM

INDOOR
BATTEN
 PRODUCT OVERVIEW

MO SLIM – indoor batten LED light fittings

MO SLIM
page 286

IP20 MO SLIM
page 286

CZECH LIGHT FITTINGS 285

 MO SLIM

… indoor suspended LED light fitting.

USE ADVANTAGES
Interior light fitting from aluminum profile and • Light fitting protection IP20 • In DALI version possibility of constant luminous
PC of diffuser It is suitable for selling premises, • Maximum ambient temperature up to ta = 35 °C flux for whole lifetime (CLO)
offices, corridors, entrance and terminal halls, • Lifetime: 50,000 hours / L90B10 •S  tandard model - CRI > 80: 4000 K
interiors of schools, lecture rooms and hospitals. • Possibility of connection of light fittings to re- •A  t request CRI > 80: 3000 K, 5000 K, 6500 K,
The light fittings can be easy connected to differ- quired lengths and shapes CRI > 90: 3000 K, 4000 K, 5000 K, 6500 K
ent lengths and shapes. • Diffuser: translucent polycarbonate (PC) • It can be delivered in dimmable or permanent
• Body: aluminium profile, white (RAL 9003) or emergency version M1h and M3hAt
silver (RAL 9006) colour •T  hrough-wiring in basic version
• Up to 45 % lower electricity consumption when
compared to tubes T5

up to up to
LED
35ºC -25ºC

CRI
220-240 V DALI L 90
>80 B 10

286
 MO SLIM

MO SLIM
TECHNICAL DESCRIPTION
• Light fitting protection: IP20 •R  eflector: steel sheet, white colour (RAL 9003)
• Maximum ambient temperature: ta = 35  °C, • Terminal block: 2x screwless-type, five-poles,
Maximum ambient temperature: ta = 0-25 °C three-phase connection
(version with emergency back-up source M1h • Electric equipment: LED modules, current driv-
a M3hAt) er or current driver DALI
• Maximum system efficacy: 153 lm/W
• The watt and lumen values can vary by ± 7,5 %
• Standard model - CRI > 80: 4000 K
• MacAdam = 3 SDCM
• Lifetime: 50,000 hours / L90B10
• Diffuser: translucent polycarbonate (PC)
• Body: aluminium profile, white (RAL 9003) or
silver (RAL 9006) colour

MO SLIM 1.4ft
150° 180° 150°

A 112 120° 120°

90° 90°

65
C0 60° 60°

C90
30° 0° 30°
L

Luminous flux Luminous flux Power System Net A

Code Type of LED modules of light fitting consumption efficacy weight
[kg] [mm]
[lm] [lm] [W] [lm/W]
For ambient temperature ta = 35 °C - aluminum profile of white color - diffuser: translucent polycarbonate
63873 MO SLIM 1.2ft 1300/840 1320 1170 8 146 1,7 570
63878 MO SLIM 1.2ft 1600/840 1580 1410 10 141 1,7 570
63859 MO SLIM 1.2ft 2200/840 2200 1960 14 140 1,7 570
63887 MO SLIM 1.4ft 2600/840 2580 2300 16 143 2,9 1130
63899 MO SLIM 1.4ft 3200/840 3110 2770 20 138 2,9 1130
63903 MO SLIM 1.4ft 4400/840 4350 3870 27 143 2,9 1130
63874 MO SLIM 1.4ft 6400/840 6260 5570 38 146 2,9 1130
63879 MO SLIM 1.5ft 3250/840 3240 2880 20 144 3,4 1410
63904 MO SLIM 1.5ft 4000/840 3880 3450 24 143 3,4 1410
63914 MO SLIM 1.5ft 5500/840 5420 4820 33 146 3,4 1410
63919 MO SLIM 1.5ft 8000/840 7740 6890 45 153 3,4 1410

MO SLIM Body: white colour (RAL 9003)

Code Type M1h M3hAt DALI DALI M1h DALI M3hAt

63873 MO SLIM 1.2ft 1300/840 x x 63917 x x
63878 MO SLIM 1.2ft 1600/840 x x 63922 x x
63859 MO SLIM 1.2ft 2200/840 x x 63908 x x
63887 MO SLIM 1.4ft 2600/840 63905 63943 63937 63910 63951
63899 MO SLIM 1.4ft 3200/840 63934 63947 63945 63938 63955
63903 MO SLIM 1.4ft 4400/840 63942 63916 63949 63950 63926
63874 MO SLIM 1.4ft 6400/840 63946 63921 63918 63954 63931
63879 MO SLIM 1.5ft 3250/840 63915 63907 63923 63925 63912
63904 MO SLIM 1.5ft 4000/840 63920 63936 63909 63930 63940
63914 MO SLIM 1.5ft 5500/840 63906 63944 63924 63911 63952
63919 MO SLIM 1.5ft 8000/840 63935 63948 63929 63939 63956

Example of type marking: 63921 = MO SLIM 1.4ft 6400/840 M3hAt

CZECH LIGHT FITTINGS 287

 MO SLIM

MO SLIM s Body: silver colour (RAL 9006)

Code Type M1h M3hAt DALI DALI M1h DALI M3hAt

63927 MO SLIM 1.2ft 1300/840 s x x 10619 x x
63932 MO SLIM 1.2ft 1600/840 s x x 10621 x x
63913 MO SLIM 1.2ft 2200/840 s x x 10622 x x
63941 MO SLIM 1.4ft 2600/840 s 10502 10517 10626 10762 10789
63953 MO SLIM 1.4ft 3200/840 s 10503 10518 10751 10768 10792
63957 MO SLIM 1.4ft 4400/840 s 10504 10599 10752 10769 10794
63928 MO SLIM 1.4ft 6400/840 s 10506 10608 10753 10772 10795
63933 MO SLIM 1.5ft 3250/840 s 10508 10612 10756 10778 10796
10497 MO SLIM 1.5ft 4000/840 s 10509 10614 10757 10779 10797
10498 MO SLIM 1.5ft 5500/840 s 10511 10615 10758 10782 10798
10500 MO SLIM 1.5ft 8000/840 s 10513 10617 10759 10788 10799

LEGEND
s – silver colour RAL 9006 M1h – emergency back-up source with operating time of 1 hour (SA) for both permanent
DALI – version with electronic and digitally dimmed ballast module op- and emergency illumination
erated via DALI protocol M3hAt – emergency back-up source with operating time of 1 hour (SA) for both permanent
and emergency illumination with battery autotesting
Batteries must be formatted before their putting into operation. Assembly instructions must be
observed at installation.

LIGHT FITTING ATTACHMENT

a) With the use of wire-cord suspensions and joints

LIGHT FITTING DETAILED VIEW

MO SLIM

Weight
Code Type Description
[kg]
10802 MO SLIM - S direct connection of light fittings into row, white RAL 9003 0.5
112

10809 MO SLIM - S s direct connection of light fittings into row, silver RAL 9006 0.5

11 Weight
2 Code Type Description
[kg]
10808 MO SLIM - L connection of light fittings in L shape with angle of 90°, white RAL 9003 0.6
10812 MO SLIM - L s connection of light fittings in L shape with angle of 90°, silver RAL 9006 0.6

288
CZECH LIGHT FITTINGS 289
EMERGENCY LED

NANOTTICA
PRIMA LED
FUTURA
BELTR LED
HELIOS LED
PLEXI LED
 PRODUCT OVERVIEW

PRIMA LED – plastic emergency LED light fitting

PRIMA LED NM
page 292

IP66 PRIMA LED NM PRIMA LED Ex NM

page 292 page 295

FUTURA – plastic emergency LED light fitting

FUTURA NM
page 297

IP66 FUTURA NM
page 297

NANOTTICA – plastic emergency LED light fitting

NANOTTICA NM
page 300

IP66 NANOTTICA NM
page 300

BELTR LED NM – plastic emergency LED light fitting

BELTR LED NM
page 304

IP40 BELTR LED NM BELTR LED NM

page 304 ACCESSORIES
page 312

HELIOS LED – all-plastic emergency LED light fitting

HELIOS LED
page 307

IP42 IP65 HELIOS LED HELIOS DS LED HELIOS LED

page 308 page 309 ACCESSORIES
page 312

PLEXI LED – emergency LED light fitting for installation into plasterboard lower ceilings

PLEXI LED
page 310

IP20 PLEXI LED

page 310 PLEXI LED
ACCESSORIES
page 312

CZECH LIGHT FITTINGS 291

 PRIMA LED NM

… emergency.

USE ADVANTAGES
Non-maintained emergency luminaire for es- •L  ight fitting protection IP66 • Integrated diode for indication of correct
cape routes, available for use in high ambient • High thermal resistance ranging from ta = 0 °C operation
temperature, ta = 50 °C, is intended by its func- to ta = 50 °C also for basic Ni-Cd battery type • Optional selection of battery type between
tion and shape primarily for being in a set with • LED module lifetime: 50 000 hours / L80B20 Ni-Cd or LiFePO4
Prima LED and Innova light fittings. • Luminous flux of the light fitting: 440 lm •L  ow energy consumption in StandBy mode
• Diffuser: translucent polycarbonate (PC) = high • Optional selection of connection between cable
It is recommended for escape routes of interior mechanical resistance gland or connector
industrial rooms, storage halls, sports premises, • Body: grey polycarbonate (PC) = high mechani- • Insulation class II
agricultural buildings and laboratories without cal resistance
hazard of explosion of gases, dusts and flamma- • Emergency module 1h or 3h
ble vapours. • Optional selection of EM kit with battery
autotest
It is resistant to dust, moisture and spouting wa-
ter. The body and the diffuser made of polycar-
bonate (PC) have increased resistance against
deformation and impact.

Atmosphere emissions must be considered, as

they may reduce the usability of plastics at instal-
lation in aggressive environment, see p. 325. up to up to
LED
50ºC 0ºC

CRI
220-240 V
>80

292
 PRIMA LED PC, PCc

PRIMA LED P C, PCc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 groove
• Maximum ambient temperature: ta = 50 °C • Light fitting connection: cable gland PG 13,5 / 16
• LED module lifetime: 50 000 hours / L80B20 or connector
• Luminous flux of the light fitting: 440 lm •D  istance holder: polyamide + 10 % glass fibre
• Maximum light fitting efficiency: 133 lm/W •E  lectric equipment:
• CRI > 80: 6500 K EM kit including Ni-Cd battery without autotest,
• MacAdam = 3 SDCM LED module
• Diffuser: translucent PC (high mechanical EM kit including LiFePO4 battery with autotest,
resistance, UV stability) LED module
• Body: grey PC (high mechanical resistance, • The package includes: stainless hooks and
UV stability) stainless brackets
• Reflector: white steel sheet (RAL 9003) • 1-year warranty for battery, 2-year warranty for
• Clips: polyamide + 15 % glass fibre or stainless EM kit (unit + LED module)
steel + polyamide • The above stated values of power consumption
• Sealing: polyurethane (PUR), foam-filled body and luminous flux are within a tolerance of ± 7,5 %

PRIMA LED 1.2ft PC

150° 180° 150°

662
120° 120°
350 95
90° 90°
111
100

C0 60° 60°

C90
30° 0° 30°

Autonomy Luminous flux Power Light fitting Power Charging Power Net
of light fitting in emergency efficiency Battery in standby time in charging weight
Type
mode type mode mode
[hrs] [lm] [W] [lm/W] [W] [hrs] [W] [kg]
Non-maintained emergency luminaire without autotest
PRIMA LED 1.2ft PC NM1h 1 440 4,5 98 Ni-Cd 1,5 24 9 1,2
PRIMA LED 1.2ft PC NM3h 3 440 4,5 98 Ni-Cd 1,5 24 9 1,4
Non-maintained emergency luminaire with autotest
PRIMA LED 1.2ft PC NM1hAt 1 440 3,3 133 LiFePO4 0,7 12 3,5 1,2
PRIMA LED 1.2ft PC NM3hAt 3 440 3,3 133 LiFePO4 0,7 12 3,5 1,4

PRIMA LED PC with cable glands Non-maintained emergency luminaire without autotest - cable glands PG 13,5 / 16 - plastic clips
Type NM1h 3F NM1h DALI 3F NM1h NM3h 3F NM3h DALI 3F NM3h
PRIMA LED 1.2ft PC … 62210 62211 x 62213 62214 x
Non-maintained emergency luminaire with autotest - cable glands PG 13,5 / 16 - plastic clips
Type NM1hAt 3F NM1hAt DALI 3F NM1hAt NM3hAt 3F NM3hAt DALI 3F NM3hAt
PRIMA LED 1.2ft PC … 62220 62221 x 62223 62224 x

PRIMA LED PCc with cable glands Non-maintained emergency luminaire without autotest - cable glands PG 13,5 / 16 - stainless clips (c)
Type NM1h 3F NM1h DALI 3F NM1h NM3h 3F NM3h DALI 3F NM3h
PRIMA LED 1.2ft PCc … 62230 62231 x 62233 62234 x
Non-maintained emergency luminaire with autotest - cable glands PG 13,5 / 16 - stainless clips (c)
Type NM1hAt 3F NM1hAt DALI 3F NM1hAt NM3hAt 3F NM3hAt DALI 3F NM3hAt
PRIMA LED 1.2ft PCc … 62240 62241 x 62243 62244 x

PRIMA LED PC with connectors Non-maintained emergency luminaire without autotest - interconnecting connectors - plastic clips
Type L1 2x5P NM1h L3 2x5P NM1h L1 2x7P NM1h L1 2x5P NM3h L3 2x5P NM3h L1 2x7P NM3h
PRIMA LED 1.2ft PC … 62250 62251 62252 62253 62254 62255
Non-maintained emergency luminaire with autotest - interconnecting connectors - plastic clips
Type L1 2x5P NM1hAt L3 2x5P NM1hAt L1 2x7P NM1hAt L1 2x5P NM3hAt L3 2x5P NM3hAt L1 2x7P NM3hAt
PRIMA LED 1.2ft PC … 62260 62261 62262 62263 62264 62265

PRIMA LED PCc with connectors Non-maintained emergency luminaire without autotest - interconnecting connectors - stainless clips (c)
Type L1 2x5P NM1h L3 2x5P NM1h L1 2x7P NM1h L1 2x5P NM3h L3 2x5P NM3h L1 2x7P NM3h
PRIMA LED 1.2ft PCc … 62270 62271 62272 62273 62274 62275
Non-maintained emergency luminaire with autotest - interconnecting connectors - stainless clips (c)
Type L1 2x5P NM1hAt L3 2x5P NM1hAt L1 2x7P NM1hAt L1 2x5P NM3hAt L3 2x5P NM3hAt L1 2x7P NM3hAt
PRIMA LED 1.2ft PCc … 62280 62281 62282 62283 62284 62285

CZECH LIGHT FITTINGS 293

 PRIMA LED PC, PCc

LEGEND
NM1h – non-maintained emergency luminaire, operation time 1 hour
3F NM1h – non-maintained emergency luminaire, operation time 1 hour, 5-wire throughwiring (3F)
DALI 3F NM1h – non-maintained emergency luminaire, operation time 1 hour, 7-wire throughwiring (DALI 3F)
NM3h – non-maintained emergency luminaire, operation time 3 hours
3F NM3h – non-maintained emergency luminaire, operation time 3 hours, 5-wire throughwiring (3F)
DALI 3F NM3h – non-maintained emergency luminaire, operation time 3 hours, 7-wire throughwiring (DALI 3F)

L1 2x5P NM1h –n  on-maintained emergency luminaire, 2x5P connectors and 5-wire throughwiring (3F), operation time 1 hour, line connection, power supply from L1
L3 2x5P NM1h –n  on-maintained emergency luminaire, 2x5P connectors and 5-wire throughwiring (3F), operation time 1 hour, line connection, power supply from L3
L1 2x7P NM1h – non-maintained emergency luminaire, 2x7P connectors and 7-wire throughwiring (DALI 3F), operation time 1 hour, line connection, power supply from L1
L1 2x5P NM3h –n  on-maintained emergency luminaire, 2x5P connectors and 5-wire throughwiring (3F), operation time 3 hours, line connection, power supply from L1
L3 2x5P NM3h –n  on-maintained emergency luminaire, 2x5P connectors and 5-wire throughwiring (3F), operation time 3 hours, line connection, power supply from L3
L1 2x7P NM3h – non-maintained emergency luminaire, 2x7P connectors and 7-wire throughwiring (DALI 3F), operation time 3 hours, line connection, power supply from L1

…At – version with battery autotest

Module signalling without autotest Module signalling with autotest (At)

LED colour Information LED colour Information
 green  green  red
flashing battery charging flashing - battery charging
- running test/emergency mode - flashing defective LED module
- shining defective battery
- - running test/emergency mode

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks

LIGHT FITTING DETAILED VIEW

PRIMA LED PC

294
PRIMA LED Ex NM NEW

... emergency and orientation.

USE ADVANTAGES
Non-maintained emergency luminaire for es- •L  ight fitting protection IP66 • Integrated diode for indication of correct
cape routes, available for use in high ambient • High thermal resistance ranging from ta = 0 °C operation
temperature, ta = 50 °C, is intended by its func- to ta = 50 °C also for basic Ni-Cd battery type • Low energy consumption in StandBy mode
tion and shape primarily for being in a set with • LED module lifetime: 50 000 hours / L80B20 • Certification: TÜV CY 22 ATEX 0206610 X Issue: 01
Prima LED Ex light fittings. • Luminous flux of the light fitting: 440 lm
• Diffuser: translucent polycarbonate (PC) = high
The light fitting is suitable for the environment mechanical resistance
with a danger of explosion of gas, dust and com- • Body: grey polycarbonate (PC) = high mechani- The light fitting is certified for the environment:
bustible fumes. The light fittings meet the re- cal resistance II 3G Ex nR IIC T6 Gc  
quirements of Government Decree 116/2016 Coll. • Emergency module 1h or 3h II 3D Ex tc IIIC T70°C Dc
and European Community Directive 2014/34/EU.

The basic requirements for safety and health

protection are secured by the verification of
conformity with the standards according to EN
60079-15, EN 60079-0 and EN 60079-31.

It is resistant to dust, moisture and spouting wa-

ter. The body and the diffuser made of polycar- up to up to
LED
bonate (PC) have increased resistance against 50ºC 0ºC
deformation and impact. 220-240 V
CRI

>80
Atmosphere emissions must be considered, as
they may reduce the usability of plastics at instal-
lation in aggressive environment, see p. 325.

CZECH LIGHT FITTINGS 295

 PRIMA LED Ex PCc

PRIMA LED Ex PCc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 •L  ight fitting connection: cable gland M20x1,5
• Maximum ambient temperature: ta = 50 °C ATEX
• LED module lifetime: 50 000 hours / L80B20 •D  istance holder: polyamide + 10 % glass fibre
• Luminous flux of the light fitting: 440 lm •E  lectric equipment:
• CRI > 80: 6500 K EM kit including Ni-Cd battery without autotest,
• MacAdam = 3 SDCM LED module
• Diffuser: translucent PC (high mechanical •T  he package includes: stainless hooks and
resistance, UV stability) stainless brackets
• Body: grey PC (high mechanical resistance, •1  -year warranty for battery, 2-year warranty for
UV stability) EM kit (unit + LED module)
• Reflector: white steel sheet (RAL 9003) • The above stated values of power consumption
• Clips: stainless steel + polyamide and luminous flux are within a tolerance of ± 7,5 %
• Sealing: polyurethane (PUR), foam-filled body •P  ictogram: optional accessory
groove

PRIMA LED Ex 1.2ft PC

150° 180° 150°

670
120° 120°
350 140
90° 90°
111
100

C0 60° 60°

C90
30° 0° 30°

Autonomy Luminous flux Power Power Charging Power Net

of light fitting in emergency Battery in standby time in charging weight
Type
mode type mode mode
[hrs] [lm] [W] [W] [hrs] [W] [kg]
Non-maintained emergency luminaire without autotest
PRIMA LED Ex 1.2ft PCc NM1h 1 440 7 Ni-Cd 1,5 24 2 1,6
PRIMA LED Ex 1.2ft PCc NM3h 3 440 7 Ni-Cd 1,5 24 2 1,8

PRIMA LED Ex PCc with cable glands Non-maintained emergency luminaire without autotest - cable glands M20x1,5 ATEX - stainless clips (c)
Type NM1h 3F NM1h NM3h 3F NM3h
PRIMA LED Ex 1.2ft PCc … 63848 x 63849 x

LEGEND
NM1h – non-maintained emergency luminaire, operation time 1 hour Module signalling without autotest
3F NM1h – non-maintained emergency luminaire, operation time 1 hour, 5-wire throughwiring (3F)
LED colour Information
 green
NM3h – non-maintained emergency luminaire, operation time 3 hours
flashing battery charging
3F NM3h – non-maintained emergency luminaire, operation time 3 hours, 5-wire throughwiring (3F)
- running test/emergency mode

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks

LIGHT FITTING DETAILED VIEW

PRIMA LED Ex PCc

296
FUTURA NM

… emergency.

USE ADVANTAGES
Non-maintained emergency luminaire for es- •L  ight fitting protection IP66 • Integrated diode for indication of correct
cape routes, available for use in high ambient • High thermal resistance ranging from ta = 0 °C operation
temperature, ta = 50 °C, is intended by its func- to ta = 50 °C also for basic Ni-Cd battery type • Optional selection of battery type between
tion and shape primarily for being in a set with • LED module lifetime: 50 000 hours / L80B20 Ni-Cd or LiFePO4
Futura and Innova light fittings. • Luminous flux of the light fitting: 440 lm •L  ow energy consumption in StandBy mode
• Diffuser: translucent polycarbonate (PC) = high • Optional selection of connection between cable
It is recommended for escape routes of interior mechanical resistance gland or connector
industrial rooms, storage halls, sports premises, • Body: grey polycarbonate (PC) = high mechani- • Insulation class II
agricultural buildings and laboratories without cal resistance
hazard of explosion of gases, dusts and flamma- • Emergency module 1h or 3h
ble vapours. • Optional selection of EM kit with battery
autotest
It is resistant to dust, moisture and spouting wa-
ter. The body and the diffuser made of polycar-
bonate (PC) have increased resistance against
deformation and impact.

Atmosphere emissions must be considered, as

they may reduce the usability of plastics at instal-
lation in aggressive environment, see p. 325. up to up to
LED
50ºC 0ºC

CRI
220-240 V
>80

CZECH LIGHT FITTINGS 297

 FUTURA PC, PCc

FUTURA P C, PCc
TECHNICAL DESCRIPTION
• Light fitting protection: IP66 • Light fitting connection: cable gland PG 13,5 / 16
• Maximum ambient temperature: ta = 50 °C or connector
• LED module lifetime: 50 000 hours / L80B20 •D  istance holder: polyamide + 10 % glass fibre
• Luminous flux of the light fitting: 440 lm •E  lectric equipment:
• Maximum light fitting efficiency: 133 lm/W EM kit including Ni-Cd battery without autotest,
• CRI > 80: 6500 K LED module
• MacAdam = 3 SDCM EM kit including LiFePO4 battery with autotest,
• Diffuser: translucent PC (high mechanical LED module
resistance, UV stability) • The package includes: stainless hooks and
• Body: grey PC (high mechanical resistance, stainless brackets
UV stability) • 1-year warranty for battery, 2-year warranty for
• Reflector: white steel sheet (RAL 9003) EM kit (unit + LED module)
• Clips: polyamide + 15 % glass fibre or stainless • The above stated values of power consumption
steel + polyamide and luminous flux are within a tolerance of ± 7,5 %
• Sealing: polyurethane (PUR), foam-filled body
groove

FUTURA 2.2ft PC
150° 180° 150°

612
120° 120°
475 145

90° 90°
111
100

C0 60° 60°

C90
30° 0° 30°

Autonomy Luminous flux Power Light fitting Power Charging Power Net
of light fitting in emergency efficiency Battery in standby time in charging weight
Type
mode type mode mode
[hrs] [lm] [W] [lm/W] [W] [hrs] [W] [kg]
Non-maintained emergency luminaire without autotest
FUTURA 2.2ft PC NM1h 1 440 4,5 98 Ni-Cd 1,5 24 9 1,2
FUTURA 2.2ft PC NM3h 3 440 4,5 98 Ni-Cd 1,5 24 9 1,4
Non-maintained emergency luminaire with autotest
FUTURA 2.2ft PC NM1hAt 1 440 3,3 133 LiFePO4 0,7 12 3,5 1,2
FUTURA 2.2ft PC NM3hAt 3 440 3,3 133 LiFePO4 0,7 12 3,5 1,4

FUTURA PC with cable glands Non-maintained emergency luminaire without autotest - cable glands PG 13,5 / 16 - plastic clips
Type NM1h 3F NM1h NM3h 3F NM3h
FUTURA 2.2ft PC … 62410 62411 62413 62414
Non-maintained emergency luminaire with autotest - cable glands PG 13,5 / 16 - plastic clips
Type NM1hAt 3F NM1hAt NM3hAt 3F NM3hAt
FUTURA 2.2ft PC … 62420 62421 62423 62424

FUTURA PC with cable glands Non-maintained emergency luminaire without autotest - cable glands PG 13,5 / 16 - stainless clips (c)
Type NM1h 3F NM1h NM3h 3F NM3h
FUTURA 2.2ft PCc … 62430 62431 62433 62434
Non-maintained emergency luminaire with autotest - cable glands PG 13,5 / 16 - stainless clips (c)
Type NM1hAt 3F NM1hAt NM3hAt 3F NM3hAt
FUTURA 2.2ft PCc … 62440 62441 62443 62444

LEGEND
NM1h – non-maintained emergency luminaire, operation time 1 hour
3F NM1h – non-maintained emergency luminaire, operation time 1 hour, 5-wire throughwiring (3F)
NM3h – non-maintained emergency luminaire, operation time 3 hours
3F NM3h – non-maintained emergency luminaire, operation time 3 hours, 5-wire throughwiring (3F)

…At – version with battery autotest

Module signalling without autotest Module signalling with autotest (At)

LED colour Information LED colour Information
 green  green  red
flashing battery charging flashing - battery charging
- running test/emergency mode - flashing defective LED module
- shining defective battery
- - running test/emergency mode

298
 FUTURA PC, PCc

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks

LIGHT FITTING DETAILED VIEW

FUTURA PC

CZECH LIGHT FITTINGS 299

 NANOTTICA NM

… emergency.

USE ADVANTAGES
Non-maintained emergency luminaire for es- •L  ight fitting protection IP66 • Emergency module 1h or 3h
cape routes, available for use in high ambient • High thermal resistance ranging from ta = 0 °C • Integrated diode for indication of correct
temperature, ta = 50 °C, is intended by its func- to ta = 50 °C also for basic Ni-Cd battery type operation
tion and shape primarily for being in a set with • LED module lifetime: 50 000 hours / L80B20 • Low energy consumption in StandBy mode
NANOTTICA light fittings. • Luminous flux of the light fitting: 440 lm
• Diffuser: translucent polycarbonate (PC) = high
It is recommended for escape routes of interior mechanical resistance
industrial rooms, storage halls, sports premises, • Body: grey polycarbonate (PC) = high mechani-
agricultural buildings and laboratories without cal resistance
hazard of explosion of gases, dusts and flamma-
ble vapours.

It is resistant to dust, moisture and spouting wa-

ter. The body and the diffuser made of polycar-
bonate (PC) have increased resistance against
deformation and impact.

Atmosphere emissions must be considered, as

they may reduce the usability of plastics at instal- up to up to

lation in aggressive environment, see p. 325. LED

50ºC 0ºC

CRI
220-240 V
>80

300
 NANOTTICA NM

NANOTTICA PC, PCc

TECHNICAL DESCRIPTION
• Light fitting protection: IP66 •L  ight fitting connection: cable gland PG 13,5 
• Maximum ambient temperature: ta = 50 °C •E  lectric equipment:
• LED module lifetime: 50 000 hours / L80B20 EM kit including Ni-Cd battery without autotest,
• Luminous flux of the light fitting: 440 lm LED module
• Maximum light fitting efficiency: 133 lm/W EM kit including LiFePO4 battery with autotest,
• CRI > 80: 6500 K LED module
• MacAdam = 3 SDCM • The package includes: stainless hooks and
• Diffuser: translucent PC (high mechanical stainless brackets
resistance, UV stability) • 1-year warranty for battery, 2-year warranty for
• Body: grey PC (high mechanical resistance, EM kit (unit + LED module)
UV stability) • The above stated values of power consumption
• Reflector: white steel sheet (RAL 9003) and luminous flux are within a tolerance of ± 7,5 %
• Clips: polyamide + 15 % glass fibre or stainless
steel + polyamide
• Sealing: polyurethane (PUR), foam-filled body
groove

NANOTTICA 1.2ft PC
150° 180° 150°

615
120° 120°
110-370
98
90° 90°
84
79

C0 60° 60°

C90
30° 0° 30°

Autonomy Luminous flux Power Light fitting Power Charging Power Net
of light fitting in emergency efficiency Battery in standby time in charging weight
Type
mode type mode mode
[hrs] [lm] [W] [lm/W] [W] [hrs] [W] [kg]
Non-maintained emergency luminaire without autotest
NANOTTICA 1.2ft PC NM1h 1 460 4,5 102 Ni-Cd 1,5 24 9 1,2
Non-maintained emergency luminaire with autotest
NANOTTICA 1.2ft PC NM1hAt 1 460 3,3 133 LiFePO4 0,7 12 3,5 1,2

NANOTTICA PC with cable glands Non-maintained emergency luminaire without autotest - cable glands PG 13,5 - plastic clips
Tye NM1h 3F NM1h
NANOTTICA 1.2ft PC … 103644 103645
Non-maintained emergency luminaire with autotest - cable glands PG 13,5 - plastic clips
Type NM3hAt 3F NM3hAt
NANOTTICA 1.2ft PC … 103643 103646

NANOTTICA PCc with cable glands Non-maintained emergency luminaire without autotest - cable glands PG 13,5 - stainless clips (c)
Type NM1h 3F NM1h
NANOTTICA 1.2ft PCc … 103651 103652
Non-maintained emergency luminaire with autotest - cable glands PG 13,5 - stainless clips (c)
Type NM3hAt 3F NM3hAt
NANOTTICA 1.2ft PCc … 103650 103653

LEGEND
NM1h – non-maintained emergency luminaire, operation time 1 hour
3F NM1h At – non-maintained emergency luminaire, operation time 1 hour, 5-wire throughwiring (3F), version with battery autotest
NM3h – non-maintained emergency luminaire, operation time 3 hours
3F NM3hAt – non-maintained emergency luminaire, operation time 3 hours, 5-wire throughwiring (3F), version with battery autotest

Module signalling without autotest Module signalling with autotest (At)

LED colour Information LED colour Information
 green  green  red
flashing battery charging flashing - battery charging
- running test/emergency mode - flashing defective LED module
- shining defective battery
- - running test/emergency mode

CZECH LIGHT FITTINGS 301

 NANOTTICA NM

LIGHT FITTING ATTACHMENT

a) Directly to a ceiling or a wall with the use of screws and stainless brackets
b) Suspension with the use of stainless hooks
c) To be attached to a track lighting system with a width of 60 mm using stainless steel snap-in mounting clips
d) Attachment with the use of side hangers to the wall

VARIABLE INSTALLATION PITCH

NANOTTICA NM

MAXIMUM

MINIMUM

LIGHT FITTING DETAILED VIEW

NANOTTICA NM

302
 BELTR LED NM

... emergency and orientation.

USE ADVANTAGES
The light fitting is suitable for emergency and • Light fitting protection IP40 •
Integrated diode for indication of correct
orientation illumination of hallways, offices, • High thermal resistance ranging from ta = 0 °C operation
warehouses. to ta = 40 °C also for basic Ni-Cd battery type •
Optional selection of battery type between
• LED module lifetime: 50 000 hours / L80B20 Ni-Cd or LiFePO4
Non-maintained emergency luminaire for es- • Luminous flux of the light fitting: 440 lm •L
 ow energy consumption in StandBy mode
cape routes, available for use in high ambient • Diffuser: translucent polycarbonate (PC) = high
temperature, ta = 40 °C. mechanical resistance
• Body: steel sheet, white colour (RAL 9003)
Atmosphere emissions must be considered, as • Emergency module 1h or 3h
they may reduce the usability of plastics at instal- • Optional selection of EM kit with battery
lation in aggressive environment, see p. 325. autotest

up to up to
LED
40ºC 0ºC

CRI
220-240 V
>80

304
 BELTR LED NM, NMAt

BELTR LED NM, NMAt

TECHNICAL DESCRIPTION
• Recognizing distance: 25 m •C  able gland: white, rubber
• Light fitting protection: IP40 •E  lectric equipment:
• Maximum ambient temperature: ta = 40 °C EM kit including Ni-Cd battery without autotest,
• LED module lifetime: 50 000 hours / L80B20 LED module
• Luminous flux of the light fitting: 440 lm EM kit including LiFePO4 battery with autotest,
• Maximum light fitting efficiency: 135 lm/W LED module
• CRI > 80: 6500 K • 1-year warranty for battery, 2-year warranty for
• MacAdam = 3 SDCM EM kit (unit + LED module)
• Diffuser: translucent polycarbonate (PC), UV • The above stated values of power consumption
stable, impact-resistant and luminous flux are within a tolerance of ± 7,5 %
• Body: steel sheet, white colour (RAL 9003) • Pictogram: optional accessory

BELTR LED NM
150° 180° 150°

325
120° 120°
250 146
90° 90°
58

C0 60° 60°

C90
30° 0° 30°

Autonomy Luminous flux Power Light fitting Power Charging Power Net
of light fitting in emergency efficiency Battery in standby time in charging weight
Type
mode type mode mode
[hrs] [lm] [W] [lm/W] [W] [hrs] [W] [kg]
Non-maintained emergency luminaire without autotest
BELTR LED 2.1ft NM1h 1 440 4,5 98 Ni-Cd 1,5 24 9 1,2
BELTR LED 2.1ft NM3h 3 440 4,5 98 Ni-Cd 1,5 24 9 1,4
Non-maintained emergency luminaire with autotest
BELTR LED 2.1ft NM1hAt 1 440 3,3 135 LiFePO4 0,7 12 3,5 1,2
BELTR LED 2.1ft NM3hAt 3 440 3,3 135 LiFePO4 0,7 12 3,5 1,4

BELTR LED NM, NMAt Non-maintained emergency luminaire without autotest

Type NM1h NM3h
BELTR LED 2.1ft NM 54510 54520
Non-maintained emergency luminaire with autotest
Type NM1hAt NM3hAt
BELTR LED 2.1ft NMAt 54530 54540

LEGEND
NM1h – non-maintained emergency luminaire, operation time 1 hour
NM3h – non-maintained emergency luminaire, operation time 3 hours

…At – version with battery autotest

Module signalling without autotest Module signalling with autotest (At)

LED colour Information LED colour Information
 green  green  red
flashing battery charging flashing - battery charging
- running test/emergency mode - flashing defective LED module
- shining defective battery
- - running test/emergency mode

LIGHT FITTING ATTACHMENT LIGHT FITTING DETAILED VIEW

Directly to a ceiling or a wall with the use of screws BELTR LED NM, NMAt

CZECH LIGHT FITTINGS 305

HELIOS LED

... emergency and orientation.

USE ADVANTAGES
The light fitting is suitable for emergency and •E  mergency module 1 hr or 3 hrs
orientation illumination of hallways, offices, • High-temperature Ni-Cd HT battery (M1h and
warehouses and production shop floors. M3h), or LiFePO4 battery for version with self-
test (M1hAt and M3hAt)
•L  ED indicator of correct operation
• Electronic protection against complete battery
discharge
• Possible connection for both permanent (SA)
and emergency (SE) lighting
•L  ight fitting protection IP42 or IP65
• High thermal resistance ranging from ta = 0 °C
to ta = 40 °C also for basic Ni-Cd battery type
• Insulation: Class 2

up to
LED
40ºC

220-240 V

CZECH LIGHT FITTINGS 307

 HELIOS LED

HELIOS LED
TECHNICAL DESCRIPTION
• Recognizing distance: 25 m M1hAt and M3hAt variant max. 12 h
• Light fitting protection: IP42 or IP65 •E
 lectric equipment: driver, emergency mod-
• Maximum ambient temperature: ta = 40 °C ule 1h or 3 h; M1h and M3h variants including
• Diffuser: opalized polycarbonate, UV stable Ni-Cd HT battery (3,6V); M1hAt and M3hAt vari-
• Body: white polycarbonate ants including LiFePO4 (6,4V)
• Reflector: white polycarbonate •P
 ictogram: optional accessory
• MacAdam = 3 SDCM
• Diffuser and body connected: by screws
• Charging:
M1h and M3h variants max. 24 h,

HELIOS LED
79 356 150° 180° 150°

120° 120°

90° 90°
136

C0 60° 60°

C90
30° 0° 30°

Autonomy Luminous flux Power Light fitting Charging Net

of light fittingin emergency efficiency Battery time weight
Code Type
mode type
[hrs] [lm] [W] [lm/W] [hrs] [kg]
Diffuser made of opalized polycarbonate - emergency standby source for both permanent (SA) and emergency (SE) lighting
43518 HELIOS LED 101 M1h 1 80 1 80 Ni-Cd HT 24 1,1
43511 HELIOS LED 102 M1h 1 150 2 75 Ni-Cd HT 24 1,2
43618 HELIOS LED IP65 101 M1h 1 80 1 80 Ni-Cd HT 24 1,2
43611 HELIOS LED IP65 102 M1h 1 150 2 75 Ni-Cd HT 24 1,2
43538 HELIOS LED 101 M3h 3 80 1 80 Ni-Cd HT 24 1,2
43531 HELIOS LED 102 M3h 3 150 2 75 Ni-Cd HT 24 1,4
43638 HELIOS LED IP65 101 M3h 3 80 1 80 Ni-Cd HT 24 1,2
43631 HELIOS LED IP65 102 M3h 3 150 2 75 Ni-Cd HT 24 1,4
Diffuser made of opalized polycarbonate - emergency standby source for both permanent (SA) and emergency (SE) lighting with autotest
43548 HELIOS LED 101 M1hAt 1 80 1 80 LiFePO4 12 1,1
43541 HELIOS LED 102 M1hAt 1 150 2 75 LiFePO4 12 1,2
43648 HELIOS LED IP65 101 M1hAt 1 80 1 80 LiFePO4 12 1,1
43641 HELIOS LED IP65 102 M1hAt 1 150 2 75 LiFePO4 12 1,1
43568 HELIOS LED 101 M3hAt 3 80 1 80 LiFePO4 12 1,1
43561 HELIOS LED 102 M3hAt 3 150 2 75 LiFePO4 12 1,3
43668 HELIOS LED IP65 101 M3hAt 3 80 1 80 LiFePO4 12 1,1
43661 HELIOS LED IP65 102 M3hAt 3 150 2 75 LiFePO4 12 1,2

Example of type marking: 43638 = HELIOS LED IP65 101 M3h

LEGEND
M1–3h – emergency standby source with operation time 1–3 hours for both permanent (SA) and emergency (SE) lighting
M1–3hAt – e mergency standby source with operation time 1–3 hours for both permanent (SA) and emergency (SE) lighting with autotest
Batteries must be formatted before their putting into operation. Assembly instructions must be observed at installation.

Module signalling without autotest Module signalling with autotest (At)

LED colour Information LED colour Information
 green  green  red
flashing battery charging flashing - battery charging
- running test/emergency mode - flashing defective LED module
- shining defective battery
- - running test/emergency mode

LIGHT FITTING ATTACHMENT LIGHT FITTING DETAILED VIEW

Directly to a ceiling or a wall with the use of screws HELIOS LED

308
 HELIOS DS LED

HELIOS DS LED
TECHNICAL DESCRIPTION
• Recognizing distance: 25 m •E
 lectric equipment: driver, emergency mod-
• Light fitting protection: IP42 or IP65 ule 1h or 3 h; M1h and M3h variants including
• Maximum ambient temperature: ta = 40 °C Ni-Cd HT battery (3,6V); M1hAt and M3hAt vari-
• Diffuser: opalized polycarbonate, UV stable ants including LiFePO4 (6,4V)
• Body: white polycarbonate •P
 ictogram: optional accessory
• MacAdam = 3 SDCM
• Reflector: white polycarbonate
• Diffuser and body connected: by screws
• Charging:
M1h and M3h variants max. 24 h,
M1hAt and M3hAt variant max. 12 h

136 356 HELIOS DS LED

150° 180° 150°

120° 120°
219

90° 90°

C0 60° 60°

C90
33 30° 0° 30°

Autonomy Luminous flux Power Light fitting Charging Net

of light fittingin emergency efficiency Battery time weight
Code Type
mode type
[hrs] [lm] [W] [lm/W] [hrs] [kg]
Diffuser made of opalized polycarbonate - emergency standby source for both permanent (SA) and emergency (SE) lighting
43718 HELIOS DS LED 101 M1h 1 80 1 80 Ni-Cd HT 24 1,3
43711 HELIOS DS LED 102 M1h 1 150 2 75 Ni-Cd HT 24 1,4
43818 HELIOS DS LED IP65 101 M1h 1 80 1 80 Ni-Cd HT 24 1,4
43811 HELIOS DS LED IP65 102 M1h 1 150 2 75 Ni-Cd HT 24 1,4
43738 HELIOS DS LED 101 M3h 3 80 1 80 Ni-Cd HT 24 1,4
43731 HELIOS DS LED 102 M3h 3 150 2 75 Ni-Cd HT 24 1,6
43838 HELIOS DS LED IP65 101 M3h 3 80 1 80 Ni-Cd HT 24 1,4
43831 HELIOS DS LED IP65 102 M3h 3 150 2 75 Ni-Cd HT 24 1,6
Diffuser made of opalized polycarbonate - emergency standby source for both permanent (SA) and emergency (SE) lighting with autotest
43748 HELIOS DS LED 101 M1hAt 1 80 1 80 LiFePO4 12 1,3
43741 HELIOS DS LED 102 M1hAt 1 150 2 75 LiFePO4 12 1,4
43848 HELIOS DS LED IP65 101 M1hAt 1 80 1 80 LiFePO4 12 1,3
43841 HELIOS DS LED IP65 102 M1hAt 1 150 2 75 LiFePO4 12 1,3
43768 HELIOS DS LED 101 M3hAt 3 80 1 80 LiFePO4 12 1,3
43761 HELIOS DS LED 102 M3hAt 3 150 2 75 LiFePO4 12 1,5
43868 HELIOS DS LED IP65 101 M3hAt 3 80 1 80 LiFePO4 12 1,3
43861 HELIOS DS LED IP65 102 M3hAt 3 150 2 75 LiFePO4 12 1,4

Example of type marking: 43838 = HELIOS DS LED IP65 101 M3h

LEGEND
M1–3h – emergency standby source with operation time 1–3 hours for both permanent (SA) and emergency (SE) lighting
M1–3hAt – e mergency standby source with operation time 1–3 hours for both permanent (SA) and emergency (SE) lighting with autotest
Batteries must be formatted before their putting into operation. Assembly instructions must be observed at installation.

Module signalling without autotest Module signalling with autotest (At)

LED colour Information LED colour Information
 green  green  red
flashing battery charging flashing - battery charging
- running test/emergency mode - flashing defective LED module
- shining defective battery
- - running test/emergency mode

LIGHT FITTING ATTACHMENT LIGHT FITTING DETAILED VIEW

Directly to a ceiling or a wall with the use of screws HELIOS DS LED

CZECH LIGHT FITTINGS 309

 PLEXI LED

... emergency and orientation, into lower ceilings.

USE ADVANTAGES
The light fitting is suitable for emergency illumi- •E  mergency module 1 hr or 3 hrs
nation of hallways and offices. It is intended for • High-temperature Ni-Cd HT battery (M1h and
installation into plasterboard lower ceilings. M3h), or LiFePO4 battery for version with self-
test (M1hAt and M3hAt)
•L  ED indicator of correct operation
• Electronic protection against complete battery
discharge
• Possible connection for both permanent (SA)
and emergency (SE) lighting
•L  ight fitting protection IP20
• High thermal resistance ranging from ta = 0 °C
to ta = 40 °C also for basic Ni-Cd battery type
• Insulation: Class 1

up to
LED
40ºC

220-240 V

310
 PLEXI LED

PLEXI LED
TECHNICAL DESCRIPTION
• Recognizing distance: 30 m •E
 lectric equipment: driver, emergency mod-
• Light fitting protection: IP20 ule 1h or 3 h; M1h and M3h variants including
• Maximum ambient temperature: ta = 40 °C Ni-Cd HT battery (3,6V); M1hAt and M3hAt vari-
• Diffuser: transparent plexi glass, UV stable ants including LiFePO4 (6,4V)
• Body: steel sheet, silver (RAL 9006) •P
 ictogram: optional accessory
• MacAdam = 3 SDCM
• Charging:
M1h and M3h variants max. 24 h,
M1hAt and M3hAt variant max. 12 h

110 355
45 325
210

170

Autonomy Power Charging Net

in emergency Battery time weight
Code Type
mode type
[hrs] [W] [hrs] [kg]
Diffuser made of transparent plexi glass - emergency standby source for emergency (SE) lighting
41519 PLEXI LED 101 NM1h 1 1 Ni-Cd HT 24 2,1
41539 PLEXI LED 101 NM3h 3 1 Ni-Cd HT 24 2,2
Diffuser made of transparent plexi glass - emergency standby source for both permanent (SA) and emergency (SE) lighting
41518 PLEXI LED 101 M1h 1 1 Ni-Cd HT 24 2,0
41538 PLEXI LED 101 M3h 3 1 Ni-Cd HT 24 2,1
Diffuser made of transparent plexi glass - emergency standby source for both permanent (SA) and emergency (SE) lighting with autotest
41548 PLEXI LED 101 M1hAt 1 1 LiFePO4 12 2,0
41568 PLEXI LED 101 M3hAt 3 1 LiFePO4 12 2,1
Diffuser made of transparent plexi glass - driver for central battery supply AC/DC (CB = central battery)
41578 PLEXI LED 101 CB - 1 - - 2,1

Example of type marking: 41538 = PLEXI LED M3h

LEGEND
M1–3h – emergency back-up source with operating time of 1 - 3 hours (SA) for both permanent and emergency illumination
M1–3hAt – emergency back-up source with operating time of 1 - 3 hours (SA) for both permanent and emergency illumination with autotest
NM1–3h – emergency back-up source with operating time of 1 - 3 hours (SE) for emergency (non-maintained) illumination
CB – for central battery power supply AC/DC (CB = central battery)
Batteries must be formatted before their putting into operation. Assembly instructions must be observed at installation.

Module signalling without autotest Module signalling with autotest (At)

LED colour Information LED colour Information
 green  green  red
flashing battery charging flashing - battery charging
- running test/emergency mode - flashing defective LED module
- shining defective battery
- - running test/emergency mode

LIGHT FITTING ATTACHMENT LIGHT FITTING DETAILED VIEW

Recessed into plasterboard lower ceilings PLEXI LED

CZECH LIGHT FITTINGS 311

 HELIOS LED, PLEXI LED, BELTR LED NM accessories

Stickers with pictograms for emergency light fittings

Dimensions
Code Type Description
[mm]
43901 Pictogram 01 HE for HELIOS and BELTR LED NM types - 25 m distance 125 × 250
41901 Pictogram 01 PL for PLEXI type - 30 m distance 150 × 300

Dimensions
Code Type Description
[mm]
43902 Pictogram 02 HE for HELIOS and BELTR LED NM types - 25 m distance 125 × 250
41902 Pictogram 02 PL for PLEXI type - 30 m distance 150 × 300

Dimensions
Code Type Description
[mm]
43904 Pictogram 04 HE for HELIOS and BELTR LED NM types - 25 m distance 125 × 250
41904 Pictogram 04 PL for PLEXI type - 30 m distance 150 × 300

Dimensions
Code Type Description
[mm]
43905 Pictogram 05 HE for HELIOS and BELTR LED NM types - 25 m distance 125 × 250
41905 Pictogram 05 PL for PLEXI type - 30 m distance 150 × 300

Dimensions
Code Type Description
[mm]
43906 Pictogram 06 HE for HELIOS and BELTR LED NM types - 25 m distance 125 × 250
41906 Pictogram 06 PL for PLEXI type - 30 m distance 150 × 300

Dimensions
Code Type Description
[mm]
43907 Pictogram 07 HE for HELIOS and BELTR LED NM types e - 25 m distance 125 × 250
41907 Pictogram 07 PL for PLEXI type - 30 m distance 150 × 300

Dimensions
Code Type Description
[mm]
43908 Pictogram 08 HE for HELIOS and BELTR LED NM types - 25 m distance 125 × 250
41908 Pictogram 08 PL for PLEXI type - 30 m distance 150 × 300

Dimensions
Code Type Description
[mm]
43909 Pictogram 09 HE for HELIOS and BELTR LED NM types - 25 m distance 125 × 250
41909 Pictogram 09 PL for PLEXI type - 30 m distance 150 × 300

Dimensions
Code Type Description
[mm]
43910 Pictogram 10 HE for HELIOS and BELTR LED NM types - 25 m distance 125 × 250
41910 Pictogram 10 PL for PLEXI type - 30 m distance 150 × 300

Dimensions
Code Type Description
[mm]
43911 Pictogram 11 HE for HELIOS and BELTR LED NM types - 25 m distance 125 × 250
41911 Pictogram 11 PL for PLEXI type - 30 m distance 150 × 300

312
 HELIOS LED, PLEXI LED, BELTR LED NM, PRIMA LED Ex NM accessories

Dimensions
Code Type Description
[mm]
43912 Pictogram 12 HE for HELIOS and BELTR LED NM types - 25 m distance 125 × 250
41912 Pictogram 12 PL for PLEXI type - 30 m distance 150 × 300

Dimensions
Code Type Description
[mm]
43913 Pictogram 13 HE for HELIOS and BELTR LED NM types - 25 m distance 125 × 250
41913 Pictogram 13 PL for PLEXI type - 30 m distance 150 × 300

Dimensions
Code Type Description
[mm]
43914 Pictogram 14 HE for HELIOS and BELTR LED NM types - 25 m distance 125 × 250
41914 Pictogram 14 PL for PLEXI type - 30 m distance 150 × 300
42914 Pictogram 14 TG for PRIMA LED Ex NM type - 20 m distance 100 x 300

Dimensions
Code Type Description
[mm]
43915 Pictogram 15 HE for HELIOS and BELTR LED NM types - 25 m distance 125 × 250
41915 Pictogram 15 PL for PLEXI type - 30 m distance 150 × 300
42915 Pictogram 15 TG for PRIMA LED Ex NM type - 20 m distance 100 x 300

Protective grid

Weight
Code Type Description
[kg]
43900 OM-HE, TG protective grid for HELIOS types 0.4

CZECH LIGHT FITTINGS 313

LIGHTING MANAGEMENT

MANAGEMENT
FOR SIMPLE AND LARGE
LIGHTING SYSTEMS
 LIGHTING MANAGEMENT
DALI PROFESSIONAL

LIGHTING MANAGEMENT
This innovative system brings a new trend in lighting control. It expands the existing advantages of LED technology by
allowing easy control and creation of a variety of lighting scenes. The system is designed for simple as well as complex
lighting solutions for offices, corridors and halls. The systems make it possible to regulate lighting based on daylight
level, occupancy as well as tunable white and RGB requirements.

DALIeco
Our DALIeco system is designed for simple installations.

Designed for:
• offices
• showrooms
• conference rooms
• corridors
• school classrooms
DALIeco CONTROL

Advantages:
• unit features two DALI circuits (a total of 16 fixtures may be connected to each DALI circuit)
• up to 4 light sensors may be connected
• controlled by a regular button, or an IR remote control
• small dimensions (suitable to be placed in light fixtures)
• the Touch DIM function substituted in problematic installations
• predefined operating modes ensure simplified switch-on process
• the corridor function may be set

Components for DALIeco:

DALIeco LS/PD LI User Remote DALIeco REMOTE
• regulation of lighting based on daylight level and • infra-red remote control • configuration and switching on of lighting
occupancy • 4 lighting scenes may be saved and recalled management systems by a remote control
• recessed and surface-mounted installation pos- • up to 15 independently controlled systems due
sible to adaptable IR coding

CZECH LIGHT FITTINGS 315

 ŘÍZENÉ OSVĚTLENÍ
XXXXXXXX
LIGHTING MANAGEMENT

DALIeco BT RTC
Our DALIeco BT RTC system is designed for simple installations.

Designed for:
• offices
• showrooms
• corridors
• training rooms
DALIeco BT RTC
Advantages:
• up to 32 fixtures may be controlled
• tunable white fully supported (device type 8)
• in-built clock for time plans + human centric lighting with up to 24 points
• controlled by a mobile phone or a regular button
• up to 4 separately controlled groups – lighting scenes created easily using an app (Android or iOS)
• small dimensions (suitable to be placed in light fixtures)
• up to 4 sensors and 4 buttons

Components for DALIeco BT RTC:

DALIeco LS/PD CI G2 DALI PRO PB Coupler

• regulation of lighting based on daylight level and occupancy • 4 independent push-button inputs
• recessed and surface-mounted installation possible • standard buttons and switches may be used

basicDIM Wireless
Our basicDIM Wireless system is designed for simple installations as well as for medium-size
installations where lighting regulation is required but the existing cabling must be retained.

Designed for:
• offices
• showrooms
• conference rooms
• restaurants

Advantages:
• automatic creation of wireless communication with up to 250 units
• may be controlled/set by a mobile app
• wireless connection of light fixtures using an app
• no external gateway required for communication
• firmware easily updated

316
 XXXXXXXX
LIGHTING MANAGEMENT

Components for basicDIM Wireless:

basicDIM Wireless Module basicDIM Wireless Sensor 5DP 38rc basicDIM Wireless User Interface

• when placed in a fixture, • regulation of lighting based on daylight level • battery-powered wall-mounted control panel
the fixture becomes wireless and occupancy • 4 lighting scenes may be saved and recalled
• power supply • dimming and CCT adjustment possible
• parts and accessories that correspond
to installation type (surface-mounted,
recessed)
• covers to limit motion detection
• perfect for installation height not exceed-
ing 4 m

sceneCOM S
Our sceneCOM S system is suitable for a majority of installations.

Designed for:
• offices
• restaurants
• assembly and production halls
• warehouses
• shop floors

Advantages:
• up to 64 fixtures may be controlled
• certified as a DALI-2 device
• small dimensions (may be placed under a wall-mounted switch)
• simple addressing using a mobile app sceneCOM S Controller
• time plans may be set
• tunable white fully supported (device type 8)
• up to 16 groups may be created and up to 16 scenes may be saved
• 4 independent inputs for buttons
• power supply ensured by DALI

Components for sceneCOM S:

DALI XC G3 CWM 30 DA2 DALI PS3

• 4 independent programmable inputs • DALI-2 (70 mA) power supply

• to be installed under a wall-mounted switch • small dimensions

317
 XXXXXXXX MANAGEMENT
LIGHTING

MSensor G3 PIR 10DPI WH REMOTECONTROL IR6

• monitoring of the surrounding areas and motion detection • infra-red remote control
• parts and accessories that correspond to installation type (surface-
mounted, recessed)
• designed for installation height up to 5, 10 or 16 m depending on sensor
type

DALI PROFESSIONAL
Our DALI PROFESSIONAL system is primarily intended for large installations.

Designed for:
• offices
• restaurants
• assembly and production halls
• warehouses
• shop floors

Advantages:
DALI PRO CONT-4-RTC
• 4 DALI circuits – each circuit allows up to 64 fixtures to be controlled
• 16 groups may be created and 16 scenes may be saved in each DALI circuit.
• 4 programmable relays (4x5 A) integrated in the controller
• integrated clock to manage events
• weekly planning possible
• may easily be mounted on a DIN rail
• plug-and-play configuration for instant use without setting

Components for DALI PROFESSIONAL:

DALI PRO COUPLER DALI HIGH BAY ADAPTER HIGH BAY

• 4 independent programmable inputs • integrated lighting control sensor • energy savings up to 35 % (compared to manual
• standard buttons and switches may be used • regulation of lighting for installation heights up switching)
to 13 m • motion sensor with a switch contact (adjustable power-
• direct connection to DALI off delay ranging from 30 seconds to 20 minutes)

318
 PROPOSAL OF EMERGENCY LIGHT FITTINGS

ORIENTATIONAL CHART OF ARRANGEMENT OF EMERGENCY LIGHT FITTINGS

NANOTTICA FUTURA
Installation
height [m] s

2,0 3,5 8,5 8,9 9,2 3,8 4,1 9,3 9,0 8,6 3,7
2,5 3,9 9,4 9,9 10,3 4,3 4,3 11,2 10,8 10,3 4,1
3,0 4,3 10,3 10,8 11,2 4,7 4,6 12,0 11,5 11,1 4,3
3,5 4,6 11,1 11,6 12,0 5,0 4,8 12,6 12,1 11,7 4,5
4,0 4,8 11,9 12,4 12,8 5,1 4,9 13,1 12,7 12,2 4,7
5,0 5,0 13,2 13,6 14,1 5,4 5,2 13,7 13,1 12,7 4,9
6,0 5,2 13,8 14,3 14,8 5,4 5,3 14,0 13,5 13,2 5,1

PRIMA LED ALUMAX LED

Installation
height [m]

2,0 4,1 9,6 8,8 8,0 3,5 3,1 6,7 7,3 7,7 3,4
2,5 4,5 11,4 10,5 9,6 3,9 3,4 8,3 9,0 9,4 4,0
3,0 4,6 12,2 11,3 10,3 4,1 3,7 9,1 9,8 10,3 4,3
3,5 4,8 12,8 11,9 11,0 4,3 4,0 9,8 10,5 11,2 4,6
4,0 4,9 13,3 12,4 11,5 4,4 4,1 10,4 11,2 11,9 4,7
5,0 5,2 13,7 13,0 12,3 4,6 4,6 11,2 12,1 12,8 5,2
6,0 5,4 14,1 13,3 12,8 4,8 4,8 12,1 13,1 13,7 5,4

PERUN SLIM CANOPUS

Installation
height [m]

2,0 3,6 8,1 8,3 8,6 3,7 3,0 5,9 7,1 8,0 4,1
2,5 4,0 9,8 10,1 10,3 4,1 3,3 7,4 8,8 10,0 4,5
3,0 4,3 10,6 10,9 11,1 4,4 3,7 8,8 10,3 11,9 4,8
3,5 4,5 11,4 11,6 11,8 4,6 3,9 9,6 11,1 12,7 5,0
4,0 4,6 12,0 12,2 12,4 4,7 4,1 10,2 11,8 13,4 5,3
5,0 4,9 12,6 12,7 13,1 5,0 4,6 11,3 12,9 14,6 5,7
6,0 5,1 13,2 13,3 13,7 5,2 4,7 12,2 13,8 15,5 5,9

NAOS MPR NAOS

Installation
height [m]

2,0 3,2 7,4 7,4 7,5 3,2 3,3 8,4 8,5 8,6 3,4
2,5 3,4 8,7 8,6 8,5 3,5 3,7 9,2 9,3 9,4 3,7
3,0 3,8 9,3 9,2 9,2 3,8 3,8 10,0 10,0 10,0 3,8
3,5 4,1 9,9 10,0 10,0 4,1 4,0 10,4 10,5 10,6 4,0
4,0 4,3 10,5 10,6 10,7 4,2 4,1 10,9 10,9 11,0 4,1

320
 PROPOSAL OF EMERGENCY LIGHT FITTINGS

ORIENTATIONAL CHART OF ARRANGEMENT OF EMERGENCY LIGHT FITTINGS

LINEA Square LINEA Round

Installation
height [m]

2,0 3,8 9,5 9,5 9,5 3,8 3,8 9,5 9,5 9,5 3,8
2,0 4,2 10,4 10,4 10,4 4,2 4,0 10,4 10,4 10,4 4,0
3,0 4,3 11,2 11,1 11,1 4,3 4,3 11,1 11,1 11,1 4,3
3,0 4,5 11,8 11,8 11,7 4,5 4,5 11,7 11,7 11,7 4,5
4,0 4,6 12,3 12,3 12,3 4,6 4,6 12,2 12,2 12,2 4,6

LINEA
Installation
height [m]

2,0 3,4 9,0 8,4 7,7 3,0

2,5 3,7 9,7 9,0 8,3 3,3
3,0 3,8 10,2 9,6 8,9 3,3
3,5 3,8 10,7 10,0 9,3 3,3
4,0 3,8 10,9 10,2 9,5 3,4

BELTR LED MO SLIM

Installation
height [m]

2,0 3,4 8,5 8,3 7,8 3,2 4,0 9,8 8,7 7,7 3,2
2,5 3,7 9,3 9,1 8,7 3,4 4,2 10,6 9,6 8,5 3,5
3,0 3,8 10,0 9,8 9,3 3,7 4,5 11,4 10,3 9,3 3,8
3,5 4,0 10,5 10,3 9,8 3,7 4,7 12,0 11,0 10,0 4,0
4,0 4,1 11,0 10,8 10,3 3,8 4,8 12,5 11,5 10,5 4,2

The table of distances is based on the following parameters:

• Maintenance factor: 0.80

• Emergency lighting factor: 1.00
• Minimum illuminance in axis: 1 lx
• Minimum illuminance at half-width of escape route: 0.50 lx
• Evenness in axis max. 40 : 1
• Escape route width: 2.00 m

321
 CORRIDOR FUNCTION

CORRIDOR FUNCTION

Corridor function refers to controlling lighting based on possible to control a single fixture or an entire set of lumi-
whether motion has been detected. naires. Light intensity increases when a person enters the
room. When the person has left, the motion detector is set
This is achieved by connecting a regular motion detector to turn off with a delay, resulting in an automatic reduction
to the ballast (with a relay, no triak). Combining the use of light intensity.
of such a sensor and the function of the ballast makes it

100%

5% 5%

Corridor function is a perfect choice for spaces that re- LED drivers feature a variety of profiles, allowing them to
quire permanent illumination due to security reasons. provide the best output under a range of conditions. It is
These include e.g. public buildings, extensive residential necessary to have the LED driver programmed in order to
complexes, parking houses and lots, pedestrian under- set the corridor function. Alternatively, a lighting control
passes and underground railway stations. Light intensity system may be used to change the parameters.
in such spaces is normally low but increases if more light
is required.

322
 CORRIDOR FUNCTION

Profiles are defined by a variety of values (corridor mode):

Example of light intensity

during a person´s presence 100%

10% Example of light intensity

if no person is present 10%

1. Attack time: time that starts to run once occupancy has been detected. Light intensity increases during this period
of time until it reaches the occupancy value (default 0,7s to 100%).

2. Start time: time that starts to run once occupancy is no longer detected (120s). If a person occupying the space is
detected during this period of time, start time is reset and starts to run again from zero. If no occupancy is detect-
ed during attack time, reduction time will be triggered.

3. Reduction time: period of time during which light intensity is reduced from occupancy value to non-occupancy
value (default 32s from 100% to 10%).

4. Turn-off delay time: period of time for which non-occupancy value is maintained. Turn-off delay time may vary
based on the profile selected or it may remain undefined (never turns off).

5. Non-occupancy value: light intensity when no person occupies the space (default 10%).

6. Occupancy value: light intensity when one or more persons occupy the space (default 100%).

A user may choose to opt for a digital signal controller (DSI or DALI) anytime without having to replace the luminaire
or provide additional control lines.

MERRYTEK MC030S E occupancy sensor: a settings example

It is possible to set sensor data precisely for every application by selecting a combination of DIP switch variables.

DIP Switch settings

Recognition area (sensitivity) Activation time

1 2 3 7 8 9
I ON ON ON 100% 4 5 6
II - ON ON 75% I ON ON ON 5s
III ON - ON 50% II - ON ON 30s
IV - - ON 25% III ON - ON 90s
V - - ON 25% IV - - ON 3 min
V ON ON - 20 min
Daylight threshold
VI - - - 30 min
7 8 9
I ON ON ON 2 Lux
II ON ON - 10 Lux
III - ON - 25 Lux
IV ON - - 50 Lux
*Disabled means daylight sensor is out of order. Once motion has been detected, the
V - - - *Disabled switch turns on the fixture regardless of the light intensity of the surroundings.

323
 SOURCE COLOUR RENDERING

Source colour rendering

Warm white White Daylight
correct choice
Shot Horti-
light cultural
Light colour 79 29 827 927 830 930 25 33 840 940 950 865 965 54
CIE division 3 1B 1A 1B 1A 2A 2B 1B 1A 1A 1B 1A 2A
Shop - foodstuff • •
Shop - meat • •
Shop - textiles, leather • • •
Hairdressers', beauty salons • • •
Workshops, mechanics • •
Printing • • •
Warehouses •
Paintshops • •
Colour testing • •
Growing of plants •
Households, restaurants • •
Offices, school rooms • •
Museums • •
Hospital rooms • •
Consulting rooms •
Sporting facilities • •
Outdoor illumination • • •
• Recommended Permissible

CRI - COLOUR RENDERING INDEX

It determines the colour sensation accuracy at other than daily lighting. It is given at the scale from 0 to 100; the higher the value, the
better. The standard colour rendering index of TREVOS LED light fittings is 80, or 90 upon request.

CCT - CHROMATICITY TEMPERATURE

It determines the colour spectrum of the light (it is given in Kelvin - K).

The optimal lighting values are perceived as white light - about 5.000 - 7.000 K (5.000 K - common daylight); higher values are
perceived as a light with blue shade, while lower values as a light with yellow to red shade. The standard chromaticity temperature
of TREVOS LED light fittings is 4.000 K, or 3.000, 5.000 or 6.500 K up on request.

3000 K 4000 K 5000 K 6500 K

324
 CHEMICAL RESISTANCE

CHEMICAL RESISTANCE OF SELECTED MATERIALS

Polycarbonate/ Acrylate/AC Polyamide INOX
Environment PC (SAN, PMMA)
ABS Aluminium/Al
(PA6/66) AISI 304

concentration
Resistance Resistance Resistance Resistance Resistance Resistance

Maximum

partially

partially

partially

partially

partially

partially
yes

yes

yes

yes

yes

yes
no

no

no

no

no

no
Aceton (ketones) • • • • • •
Aniline • • • • • •
Ammonia 5% • • • • • •
Benzaldehyde • • • •
Benzene • • • • • •
Diethylether (ethers) • • • • • •
Potassium nitrate 40% • • • • • •
Ethanol (alcohols) 50% • • • • • •
Ethylacetate (esters) • • • • • •
Ethyl alcohol • • • • • •
Phenol • • • • • •
Glycerine • • • • •
Heptane • • • •
Ammonium hydroxide 25% • • • •
Sodium hydroxide - base 60% • • • • • •
Sodium chloride - salt solution 15% • • • • • •
Sulphur chloride and Calcium chloride • • • • • •
Carbon tetrachloride and Chloric ether • • • • •
Iron dichloride • • • • •
Arsenic acid and Oleic acid • • • • • •
Citric acid 20% • • • • • •
Nitric acid 20% • • • • • •
Nitric acid 50% • • • • • •
Phosphoric acid 30% • • • • •
Hydrochlorid acid 5% • • • • • •
Hydrochlorid acid 35% • • • • • •
Chromic acid 40% • • • • • •
Formic acid 30% • • • • • •
Acetic acid 10% • • • • • •
Sulphuric acid 30% • • • • • •
Methanol • • • • • •
Fuel oil • • • • • •
Mineral oil • • • • • •
Vegetable oil • • • • • •
Rape oil • • • • • •
Lamp oil • • • • • •
Hydrogen peroxide 30% • • • • • •
Ammonium sulphate 15% • • • • • •
Toluene • • • • • •
Turpentine oil • • •
Trichlorethylene • • • • • •
Sodium carbonate 20% • • • • • •
Aliphatic hydrocarbons • • • • • •
Aromatic hydrocarbons • • • • • •
Alkali • • • • •

325
 LIGHT FITTING MAINTENANCE FACTOR

APPROXIMATE VALUES OF LIGHT FITTING MAINTENANCE FACTOR (LMF)

IP65, IP66 light fittings – NANOTTICA, INNOVA, FUTURA, PRIMA LED, TREX, PERUN SLIM, ALUMAX LED, CANOPUS, LINEA

Cleaning intervals in years

Environment 1,0 1,5 2,0 2,5 3,0
Very clean 0,96 0,93 0,93 0,92 0,92
Clean 0,94 0,91 0,91 0,90 0,90
Common (optional) 0,90 0,88 0,86 0,85 0,84
Dirty (optional) 0,86 0,83 0,81 0,80 0,79

IP20, IP40 light fittings – BELTR LED, MO SLIM

Cleaning intervals in years

Environment 1,0 1,5 2,0 2,5 3,0
Very clean 0,94 0,93 0,91 0,9 0,89
Clean 0,88 0,85 0,83 0,81 0,79
Common (optional) 0,82 0,79 0,77 0,75 0,73
Dirty (optional) 0,77 0,73 0,71 0,68 0,65

The table includes only approximate values that may not match the maintenance values achievable for a specific device.

Only damp microfiber cloth can be used for cleaning.

326
NOTES
NOTES
NOTES
TREVOS, a. s.
Nova Ves 34 — 511 01 Turnov
Czech Republic

trevos.eu

please follow us