50,000 Count, Advanced DMM 608

with RS-232 Interface

K DC accuracy 0.05%
K Low voltage Ohms measurement and conductance
K Auto and software calibration
K Dual back-lit display and K type thermocouple
K Measures duty cycle, pulse width and conductance
K Compare function for go-no go testing
K Peak detection for capturing high speed signals
K Binary bit expression bargraph
K AC and AC + DC true RMS AC voltage and current
measurements
K Auto/manual ranging
K Test zener diodes up to 20 volts
K Min/Max/Avg relative modes
K Memory store and recall
K Fuse protected current ranges
K Cat II 600V and CE approved

CE

608

SPECIFICATIONS

DC Volts Resistance (50Ω range is 5,000 count) Frequency (50Hz & 500Hz ranges are 5,000 count)
Ranges: 5V, 50V, 500V, 1000V Ranges: 50Ω, 5KΩ, 50KΩ, 500KΩ, 5MΩ, 50MΩ Ranges: 50Hz, 500Hz, 50kHz, 500kHz, 5MHz
Best Resolution: 100µV; Accuracy: ±0.05% + 5D Best Resolution: 10mW; Accuracy: ±0.2% + 5D Best Resolution: 0.01Hz
mV DC Resistance: Lo Ohms (All ranges are 5,000 count) Input Sensitivity: 2V RMS; Accuracy: ±0.01% + 5D
Ranges: 500 mV to 2500mV Ranges: 5KΩ, 50KΩ, 500KΩ; 5MΩ, 50MΩ Pulse Width
Best Resolution: 10µV; Accuracy: ±0.05% + 5D Best Resolution: 1Ω; Accuracy: ±0.5% + 5D Range: 200.01ms
AC and (AC+DC) mV Conductance (5,000 count) Best Resolution: 10 µs; Accuracy: ±0.1% + 5D
Ranges: 500mV Range: 500nS Duty Cycle
Best Resolution: 10µV Resolution: 0.1nS; Accuracy: ±3% + 5D Range: 0 to 100%
Accuracy: AC mV: ±0.75% + 20D Resolution: 0.01%; Accuracy: ±0.1% + 5D
Capacitance (All ranges are 5,000 count)
(AC + DC) mV: ±1.5% + 50D
Ranges: 5nF, 50nF, 500nF, 5µF, 50µF, 500µF, 5000µF Peak Hold
AC Bandwidth: 50Hz to 20kHz
Best Resolution: 1pF; Accuracy: ±2% + 5D Accuracy: 10% of peak for a duration of > 5mS
AC and (AC+DC) Volts
Zener Diode Test General Specifications
Ranges: 5V, 50V, 500V, 750V
Range: 25.000 V Approx.; Accuracy: ±5% + 10D Operating System: Windows® 95/98/ME/XP/2000
Best Resolution: 100µV
Test: 15V to 22V Update Rates: 2/s
Accuracy: AC Volt: ±0.75% + 20D
Continuity RS-232 Output Medium: Infrared
(AC + DC)Volts: ±2.0% + 50D
Ranges: 5KΩ, 50KΩ, 500KΩ, 5MΩ Operating Temperature: 0 to 40°C at 80% relative humidity
Crest Factor: Sine wave: 1.414
Buzzer will sound at: < 0.1% of full scale of each range Power: 9 Volt battery @ 36 hours of continuous operation
DC CURRENT Size: 8.0" H × 3.7" W × 1.7" D (without holster)
Ranges: 5000µA, 500mA, 10 Amps Temperature Weight: 14.7 oz.
Best Resolution: 0.1µA; Accuracy: ±0.2% + 5D Ranges: -20 to 1200°C, -4 to 2100°F, 253 to 1423°K Standard Accessories: Manual, Protective holster, Safety
Display: °C, °F, °K probes, Temperature adapter and Probe, RS-232 cable, CD
AC and (AC+DC) AMPS
Resolution: 0.1° ROM
Ranges: 5000µA, 500mA, 10A
Accuracy: ±2°C; 0 to 150°C: ±3°C
Best Resolution: 0.1µA
Accuracy: AC Amps: ±0.75% + 20D, 50Hz to 1kHz
(AC + DC); Amps: ±1.5% + 50D, DC to 1kHz

Protek Test & Measurement

40 Boroline Road, Allendale, NJ 07401 Tel: 201-760-9898 Fax: 201-760-9888 17
Website: www.protektest.com E-Mail: sales@protektest.com