Technical Data Sheet
Edition 02.05.12
Sika® Level-110
Sika® Level-110
Fast setting self-levelling mortar up to 10 mm layers.
General Indications
Description One-pack premixed cementitious self-leveling mortar, fluid consistence featured,
consisting from high-resistance cements, selected silicon/quartz mineral charges
Construction
and specific additives. Specific to realize regularizations of indoor substrates subject
to be successively cladded with ceramic, plastics, natural stones, floating or fixed
parquet, linoleum, moquette.
Fields of application Fast-setting leveling in 1 to 10 mm thickness of indoor substrates before cladding
light traffic areas (Class P2 according to UPEC rules) such as flats, libraries and simi-
lar areas.
Fast-setting leveling in 3 to 10 mm thickness of indoor substrates before cladding
heavy traffic areas (Class P3 according to UPEC rules) such as offices, airports,
schools, hospitals, public areas, etc.
Advantages n One-pack compound
n Applicable by pump
n High mechanical strength
n Optimum bonding capacity
n Quick-setting
n Very smooth surface
Features
Description Fast-setting self-leveling mortar
Appearance Brown powder
Packing 25 kg bag
Shelf life 8 months in the original packaging, in dry environment.
CE Labelling EN 13813 CT-C30-F7
Technical Data
Consumption 1.4-1.5 kg/m2 approx. per mm of thickness
Temperature during min. +5°C - max. +30°C
application
Curing time 2 min. approx.
Pot life 20 min. approx.*
Setting time Start: 40 min. approx.* - end: 80 min. approx. *
Treadable time Treadable after 3-4 h approx. *
Cladding time Ceramic or fabrics: after 24-36 h approx. Wood or plastics: after 48 - 72 h approx.*
* Values got at room conditions: 23°C – R.H. 50%. Higher temperatures reduce the
indicated lapse of time, oppositely, lower temperatures increase them.
1 Sika® Level-110 1/3
Applicable thickness Min. 1 mm. Min. 3 mm if parquet has to be applied - max. 10 mm
Compression 1 day ≥ 15 MPa UNI EN 13892-2
Resistance 28 days ≥ 30 MPa UNI EN 13892-2
Flexural resistance 1 day ≥ 3.0 MPa UNI EN 13892-2
28 days ≥ 7.5 MPa UNI EN 13892-2
Thermal resistance From -30°C to +80°C
Allowed substrates Utilize Sika® Primer-11 W or, alternatively, Sika® Primer-21 W diluted 1:1 with water
/primers for cement-based absorbing screeds, anhydrite screed, heating floor (water system);
Utilize Sika® Primer-21 W genuine for concrete screed helicopter finished, linoleum,
PVC or vinyl, ceramic or marble floors.
Application Conditions
Method of use Substrate preparation
The substrate must be perfectly flat, tight and free from parts easily removable, non-
deformable and aged. By evaluation of the support, apply the specific primer as indi-
cated previously.
Mixing procedure
Mix one bag with 6 liters of water (24% ± 1%), utilizing an electric blender with a sui-
table mixing spiral at low speed, in a clean bucket, up to obtain a smooth paste free
of lumps. To avoid the formation of lumps, very harmful, it is advisable to proceed by
dosing at the beginning a low quantity of water so in order to obtain an homogeneous
mixture, but very viscous. Successively, add the remaining amount of water to obtain
the optimal fluid-viscous consistency of the mixture.
Do not exceed in any way with the amount of water that would cause the detachment
of leveling.
Allow the mixture to cure 2-3 minutes, scrape the bucket bottom and check that there
was no segregation, otherwise add more powder, stir briefly and pour the mixture
onto the substrate.
Use 500 rpm max. blender; do not mix at faster rate because of mechanical strength
decay of the cured product. The product can be pumped through specific devices
(contact the Technical Service).
Application
Pour the product onto the substrate and spread with flat trowel, realizing minimum
thickness of 1 mm.
Immediately after having distributed the blended material, move a spiked roller over
the whole surface, before the product starts setting.
If Sika® Level-110 were applied as a substrate intended for wooden floors, the thick-
ness to be applied must not be less than 3 mm.
Warnings Do not add more water to the already hydrated mixture, do not add anything not pro-
vided in this data sheet.
Do not use for outdoor floorings.
Not suitable for floorings subject to continuative rising damp.
Wait the expected time between the application of primers and the application of the
product.
Do not use on flexible substrates, or on wood.
Do not apply on thickness higher than 10 mm.
By the weather and application conditions on building site, drying times may be sub-
stantially different.
Safety measures
Precaution For further informations and advices regarding safety rules, uses and storage of the
chemical product users should refer to the latest Safety Data Sheet, in which are
explained physical, toxicological and environmental informations along with safety
behaviours.
Ecology Do not dispose unused product and empty packaging into the environment. See the
latest Safety Data Sheet for further informations.
2 Sika® Level-110 2/3
CE labelling
Sika Italia S.p.A.
Via Einaudi, 6
20068 Peschiera Borromeo (MI) - I
Factory 1026
EN 13813 CT-C30-F7
Construction
Screeds/Protective Coatings for indoor building
(systems as per Technical Data Sheet)
Compression resistance C30
Flexural resistance F7
Legal Notes The information, and, in particular, the recommendations relating to the application and end-use of Sika pro-
ducts, are given in good faith based on Sika's current knowledge and experience of the products when properly
stored, handled and applied under normal conditions within their shelf life. In practice, the differences in mate-
rials, substrates and actual site conditions are such, that no warranty in respect of merchantability or of fitness
for a particular purpose, nor any liability arising out of any legal relathionship whatsoever, can be inferred either
from this information, or from any written recommendations, or from any other advice offered. The proprietary
rights of third parties must be observed. All orders are accepted subject to our current terms of sale and deli-
very. Users should always refer to the most recent issue of the Technical Data Sheet for the product concer-
ned, copies of which will be supplied on request or can be accessed in the Internet under "www.sika.it".
Sika Italia S.p.A.
Via L. Einaudi 6 - 20068 Peschiera Borromeo (MI)
Tel. +39 02 54778.111 - Fax +39 02 54778.119
Como Factory:
Via G. Garrè 9 - 22100 Como (CO)
www.sika.it - info@sika.it
3 Sika® Level-110 3/3
