Volume 1 Cleaning Safety Catalogue 2018/19

Index

Eye & Face Protec�on 3-8

Mop Caps

Foot Protec�on 9-22

Shoes, Boots, Gumboots

Hand Protec�on 23-33

Gloves

Head Protec�on 34-38

Caps, Scarves

Respiratory Protec�on 39-50

Pre-Filters, Masks

Workwear 51-57

Aprons, Dresses, Con� Suits

Accessories 58-62

Buckets and Wringers, Signs, Squeegees, Brooms, Dust Pans

Consumables 63-65

Cloths, Soap

1
LEVEL OF RANGE

Economy
Economy products refer to a segment of products that offer exceptional value in
relation to price while complying with relevant quality and safety specifications.
Economy products are manufactured to offer value and utility at the most competitive
price.

Intermediate
Intermediate products refer to a segment of products that strike a balance between
high quality engineering and good value. This range is designed to be highly usable
and durable and manufactured to meet the requirements of most industries and
customers.

Premium
Premium products refer to a segment of products that are of high value due to the
unique design and engineering used to create a superior quality product. Premium
products are manufactured specifically to emphasise their exclusivity or rarity.

2
Eye Protection
3
 Introduction Eye Protection

Every year, thousands of people suffer from eye injuries in the workplace. Of these injuries, the vast majority
may have been avoided if suitable eye and face protection was used. Through our network of premium
suppliers as well as our House Brands, Select PPE offers protectie eye and face solutions designed to not
only fulfil the primary function of effective protection, but also to make the products comfortable and
suitable for every user.

WHAT TYPE OF PROTECTIONS SHOULD YOU CHOOSE?

SAFETY SPECTACLES:
Protection for eyes against:
• Dust and fine particles
• Low energy impacts (mechanical resistance for an impact up to 45 m\s).
• Harmful rays: Ultraviolet (UV) / Infrared (IR).

GOGGLES
Protection for eyes against:
• Medium energy impacts (mechanical resistance for an impact of up to 120 m/s).
• The risk of intrusion by dust, fine particles or harmful chemical products
(liquids, sprays, gas).
• The risk from molten metal projections.
• Harmful rays (UV / IR).

FACE SHIELDS:
Protection for the eyes and face against:
• Medium and high energy impacts from sparks or solid bodies, plus
projections (liquids, molten metals) that can cause generalised facial injuries.
• Hazards from electric arc discharges caused by short-circuits.
• Harmful rays (UV / IR).

European Safety Standard for Personal Eye Protection: EN166: 2001

European standard, applying to all types of individual protection of the eye which protects from hazards likely to
damaged the eye, expect for nuclear radiation, x-rays, laser emissions and infrared emitted by low-temperature
sources. Does not apply to eye protection for which seperate standards exist (e.g. anti-laser eye protection,
sunglasses for general use).

American National standard - Personal Eye and Face Protective Devices: ANSI/ISEA Z87:2015

This standard, provides minimum general requirements, test method, selection, use and maintenance of eye and face
protection devices.
2 levels of protection:
Z87 marking = “Basic Impact”
Z87+ marking = “High Impact”

RISK TO THE EYE FROM HARMFUL RADIATIONS

Zone Wave Length Environment Eyesight damage

UV-A 215 - 380mm Outdoor work Eye fatigue, Partial blindness,

Cataract, Sunshine
UV-B 280 - 315mm Sunlight, Industrial environment Cataract, Welder Flash, Arc Flash
Cornea or Crystalline Lesions,
UV-C 100 - 280mm Industrial environment, Welding Loss of eyesight
Industrial environment, computer Retinal Lesions, Loss of eyesight,
Blue-Light 400 - 480mm
work, Outdoor work Blurring degeneration (age),
Retinitis pigmentosa
Electric welding, Molten work: Retinal Lesions, Blurring
780 - 1400mm degeneration (age), Retinitis
Infrared Glassmaking, steel production
1400 - 2000mm pigmentosa, Corea or Crystalline
Microwave processes, Sunlight Lesions
4
 Introduction Eye Protection

Marking on lens
S 1 9 K N
Scale numbers (filters only)

Identification of the manufacturer

Optical class

Symbol for mechanical strength (optional)

Mechanical strength
none without mechanical strength (filters only)
S increased strength (filters only)
F low energy impact (45m/s)
B medium energy impact (120m/s) Symbol for non adherence of molten metal and
A high energy impact (190m/s) resistance to penetration of hot solids (optional)

Symbol for resistance to surface damage by fine particles

(optional)

Symbol for resistance to fogging (optional)

Certification mark

Marking on frame

S 166

Certification mark

Identification
of the manufacturer Symbol for resistance to high speed
particles (where applicable)
Number of the Mechanical Strength
EN Standard none without mechanical strength (filters only)
S increased strength (filters only)
F low energy impact (45m/s)
B medium energy impact (120 m/s)
Field(s) of use (where applicable) A high energy impact (190 m/s)

Designation Description of application areas

none General use Non specific mechanical risks, risks due to UV and/or IR light
3 Liquids Liquids (droplets and splashes)
4 Coarse dust particles Dust with >5µm grain size
5 Gas and fine dust particles Gas, vapour, mist, smoke, and dust with < 5µm grain size
8 Short circuit electric arc Electric arc due to short circuit in electrical equipment
9 "Molten metal and hot solids" Splashes of molten metal and penetration of hot solids

5
 Eye Protection Introduction

LENS TINTING AND COATINGS:

At Select PPE, through our network of premium suppliers, there are many lens colours, or tints available for
your specific application.

The benefits and limitations of each shade

Some shades, such as orange, blue or purple, will allow more light in, which will blur colour perception. Therefore,
those tints are not recommended for workers who must work with colour codes or traffic lights. On the other hand,
amber, smoke or espresso lenses will reflect colours more accurately.

For outdoors, smoke shades are preferable, as well as mirror silver or blue. The last two protect against excessive
glaring, UV rays and reduce reflection. Espresso lenses offer basically the same benefits, in addition to improving
depth perception and reducing eye fatigue.

As for amber lenses, they improve contrast and are particulary efficient in low light. However, they are not designed
for outdoor use.

Neon lighting is known to cause eye fatigue among workers. A blue-tint lens cancels yellow light, in addition to
having a very pleasant effect on the human eye.
Coloured lenses, beyond eye protection
Many work accidents are caused by visual perception deficiency. Some tasks are riskier than others. For example,
think about forklift operators driving from one building to another. The indoor / outdoor mirror lens has been
specifically designed for them, as it reduces the changes in light intensity.

A hand, a foot or even a life could be saved with an improved depth and contrast perception when using
different lens shades.
Lens Tint Chart
Lens Colour Application Glasses Type

Clear Lens Impact Protection

Outdoor use
Black/Grey Lens
Glare protection

Outdoor use in low-light situations

Amber Lens
Enhances contrast

Meant for low-light use

Orange Lens
Offers a high contrast

Indoor use
Offers a high contrast for situations where
Blue Lens
excessive sodium vapour or yellow light is
present

Mirrored Lens Reduce glare

Polarised finishes on lenses block intense

Polarised Lens reflected light
Reduce eye-fatigue caused by glare

6
 FORCE CLEAR GOGGLE WITH POLYCARBONATE LENS

FORCE CLEAR GOGGLE WITH

POLYCARBONATE LENS
Eye Protec�on
Code: IPCCL-0003-FO-000
Colour: Clear | Size: Universal

Feature Specifications
• Economic safety goggle with comfortable headband • Polycarbonate Lens
• Soft PVC frame PC lens • CE EN 166 Approved
• Direct Ventilation
• Anti-dust and impact resistance
• Light weight with comfortable design, superior side
and brow protection

7
Notes

8
Foot Protection
9
 Introduction Foot Protection

Select PPE offers a wide range of footwear from our network of premium suppliers as well as from our House
Brands, contributing to the levels of quality and specifications needed to perform the task at hand, putting your
safety first.

What is safety footwear?

Safety footwear has various levels of protection. It is essential to ensure the correct level of protection depending
on the potential hazards involved, to ensure maximum protection.

Injury risks include:

• Impact from heavy objects, resulting in injuries

• Rolling objects
• Sharp objects – risk of puncturing the sole
• Absorption of elements – such as water or oil
• Extreme temperatures
• Hazardous chemicals
• Build-up of static electricity

It is important to know that all safety footwear sold in South Africa falls within the scope of the National
Regulator for Compulsory Specifications (NRCS) and needs to be approved by this body and/or the SABS.

Safety footwear is available in a range of options, including:

Safety boots and shoes: the most common types of safety footwear incorporate protective toe caps with many
other safety features including slip resistant soles, penetration-resistant insoles and insulation against extreme
temperature. Also available as metal free.
Safety trainers: possibly considered more aesthetically appealing by wearers, these look more casual. Some have
steel toe caps while others are made of a plastic, referred to as composite toe caps.
Riggers: these have been described as ‘a real stalwart of industrial footwear’. A rigger boot is a particular type of
pull-on safety boot; the name “rigger” comes from the fact that they were standard issue for workers on the
offshore oil rigs in the North Sea, but have been worn by most types of manual worker as a general-purpose
work boot in recent times. Concerns with this type of safety footwear have been raised, including a lack of ankle
support.
Clogs: these may also be used as safety footwear. They are traditionally made from beech wood and may be fitted
with steel toe-caps and thin rubber soles for a quieter tread.

Safety footwear features:

Toe protection

Toe protection should withstand at least a 200 Joule impact. Joule is a unit of energy and this standard is
purposefully specific as something heavy falling from a low height could have a lot less energy than something
lighter from a higher point. As well as impacts, the toe area must withstand a resting mass of well over 1000kgs.
Most people have heard of steel toe cap boots but the protection doesn’t have to be steel. In fact, there are
advantages to alternatives. Non-metallic protection may be just as strong, but lighter.

Insole penetration protection

Sharp objects where we walk and stand are a signifimayt risk not only in the workplace, but also outdoors and at
home. Insole protection will guard against nails and other sharp objects. To meet this standard the footwear must
be able to resist a penetration force of 1100 Newton. Insole protection is provided as either a stainless-steel insole
or as an aluminium insole, or a synthetic anti penetration insole. The Aluminium and Kevlar solutions are the
most flexible and lightest, and cover the greatest area of the foot. Kevlar insoles also offer much higher thermal
insulation.

10
 Introduction Foot Protection

Energy Absorption
Energy Absorption occurs in the heel region of footwear.

Heat Resistant Outsoles

Heat resistant outsoles are designed to resist 90°C to 300°C for 60 seconds.

Non-metallic footwear
High demands are placed on protective footwear where the use of footwear containing metal may be
problematic. Safety shoes made with non-metallic components are a necessity, for example, working in
industries with secured areas or airport sensors. The commonly used metal parts are replaced by textile lacing
elements or plastic eyelets, as well as by composite toe caps and insoles.

Slip Resistance
Slip resistance is considered a ‘basic requirement’ of all Safety footwear.

Safety footwear may have more features than are listed above, but these are the minimum requirements to
meet the requirements of EN ISO 20345.

Electrical resistance
Electrical resistance is an important characteristic of safety shoes. There are two elements that are also
relevant when it comes to making the right choice:
• How well the shoe is able to prevent electrostatic charging by diverting this quickly.
• How well the shoe is able to offer protection from electrical shocks.

If you work with electricity, you may be exposed to voltage. Your shoes must have an electrical resistance that
prevents excessive electricity from passing through your body.

Shoes with low electrical resistance

Shoes with a guaranteed low electrical resistance divert the electrostatic charge in a controlled manner. This
prevents the accumulation of an excessively high charge (and an uncontrolled and intense discharge). The
wearer must be working on a grounded surface in order to facilitate discharge via the shoe.

Depending on your work situation, you will need shoes with a certain resistance. Select PPE offers shoes with
two types of electrical resistance: Anti-static and ESD.

Electrostatic discharge
Electrostatic discharge is important in situations involving danger of explosion (explosives, chemicals, gasses,
dust explosion), or if you work with sensitive electronics (microchips, hard drives, etc.). When you move,
friction causes an electrostatic charge in your body. Shoes and clothing that are not conductive (enough) may
increase this charge. At a certain point, a discharge occurs. An electrical discharge that is too high or
uncontrolled may have extremely uncomfortable and sometimes even serious consequences: an explosion due
to spark formation, or damage to the electronic products you work with.

Anti-static protection
Clothing, seating materials, and climate factors may cause a build-up of a static charge of electricity in the
body. Some materials in footwear may over insulate the body causing the charge to be held. Then when you
touch something the charge may rush from your body quickly causing a spark and a small uncomfortable shock.
Anti-static footwear will significantly reduce this effect, but does not offer full protection for exposure to
electronics and explosives. You will need Electro-Static Protection for this. Anti-static shoes have an electrical
resistance between 0.1 and 1000 Megaohm (MΩ), measured according to EN 20344: 2011 5 10. This value is a
compromise between good protection from electrical shocks and sufficient dissipative capacity. These shoes
may be worn in many different work environments.

11
 Foot Protection Introduction

Electro-Static protection

Electro-Static Dissipative (ESD) shoes have an electrical resistance between 0.1 and 100 (MΩ), measured
according to BS EN 61340-4-3: 2002 (IEC 61340-4-3:2001). ESD shoes are thus guaranteed to have an extremely
low electrical resistance under any conditions in order to prevent a strong, uncontrolled electrostatic charge.

Selecting the correct footwear for the hazard / risk

Knowing the specific needs of your environment is a key consideration when selecting safety footwear. Is there
a potential risk from falling objects, sharp surfaces or metals, or are chemicals or electrical hazards a potential
risk?

Hazard / Risk Considerations

Falling objects Toe cap protection – steel or composite
Sharp objects (sole
Steel or synthetic insole protection
penetration)
Metatarsal injury (crush risk) Metatarsal protector covering the bridge of the foot
Slippery surfaces Non-slip sole
Acid / alkali / chemical resistant sole; know which type of acid / chemical is
Acids / alkalis / chemicals
being used.
Heel / ankle support Ankle protection; lace ups; shock absorbing heels
Molten metal Foundry boots; calf protection
Extreme temperatures Heat resistant soles, fur linings
Minor irritant substances Rigger boots provide extra coverage, but limited ankle support

Selecting the correct footwear by industry / application

As well as considering the hazards / risks involved in the selection of safety footwear, the type of industry
should also be considered. As an example, the construction and healthcare industries will have very different
needs.
Industry Needs Recommended
Protective toe caps and insoles; anti-static
Agriculture Safety boots with insole (PVC)
and anti-slip soles; waterproof properties
Shock absorbent heel; anti-slip sole; easy
Catering Washable safety shoes (PVC)
to clean / machine washable
Protective 200 Joule toe caps and insole
Construction Standard safety boots
protection; secure fit; support
Secure top preventing hot material falling
Foundry (Welders) Foundry boots; welder safety shoes
onto feet; quick release buckles
Non-slip sole; shock absorbent heel;
Healthcare comfortable sole; easy-clean / machine Washable slip on safety shoe/clog
washable
Chemical resistant safety footwear
Laboratory / chemical Chemical resistance
with chemical resistant soles for less
handling (EN 13832-2; 13832-3)
hazardous environments
Protective toe cap; anti-static and anti-slip Safety boots / shoes to suit
Warehouse sole; oil and acid / alkali resistance warehouse activities / environment

Other selection considerations:

• Impact and Compression Ratings
• Comfort and Convenience
• Employee consultation
• Try before you buy
• Best fit
• Cost over Quality
12
 Introduction Foot Protection

Safety Footwear Standards:

EN ISO 20344:2011:
Specifies methods for testing footwear designed as personal protective equipment.

EN ISO 20345:2011:
This international standard specifies basic and additional (optional) requirements for safety footwear used for
general purposes. It includes, for example, mechanical risks, slip resistance, thermal risks, ergonomic behaviour.
The toecap protects the wearer’s toes against risk of injury from falling objects and crushing when worn in
work environments where potential hazards may occur. The midsole protects against the foot being pierced by
underfoot objects.
The classification system used to identify the protection provided by the footwear is listed below:
Safety
Category Meanings
The presence of a safety toecap providing protection against impact injury to the toes
SB
caused by falling objects. Level of protection provided is 200 Joules. Prevention of
(Basic
compression injury of the toes if trapped under a heavy object. Level of this protection is
Requirement)
15kN.

SBP As SB standard plus penetration resistance.

As SB standard plus closed seat region, antistatic properties, resistance to fuel oil and
S1
energy absorption of heel.
S1P As S1 standard plus penetration resistance.
S2 As S1 standard plus water penetration and water absorption resistance.
S3 As S2 standard plus cleated outsole and penetration resistance.
200 Joule toecap protection. All rubber or all polymeric footwear with antistatic properties.
S4
Resistance to fuel oil, energy absorption of heel and closed seat region.
S5 As S4 standard plus cleated outsole and penetration resistance.
PB Toe protection tested to 100 Joules
OB No protective toe cap

HRO Resistance to high heat 300ºC

Outsole FO Resistance to fuel oil (hydrocarbons)

E Heel energy absorption 20 Joules

P Penetration resistance 1100 Newtons

CI Insulation against cold
WR Water resistant
Whole
Footwear A Electrical properties: Antistatic footwear
M Metatarsal Protection
AN Ankle Protection

WRU Water penetration and absorption upper

Upper

13
 Foot Protection Introduction

EN ISO 13287:2012:
This European Standard specifies a method of test for the slip resistance of conventionally soled safety,
protective and occupational footwear. It is not applicable to special purpose footwear containing spikes,
metal studs or similar. The item of footwear to be tested is put on a surface, subjected to a given normal force
and moved horizontally relative to the surface. The frictional force is measured and the dynamic coefficient of
friction is calculated. If the outsole passes both the ceramic tile test (SRA) and the steel floor test (SRB) it is
marked as SRC.

Slip Resistant Markings

Passes SRA slip resistant standards: tested on ceramic tile with a diluted soap
SRA
solution.
SRB Passes SRB slip resistant standards: tested steel contamination with glycerol.
Passes SRC slip resistant standards: tested on ceramic tile contamination with a
SRC diluted soap solution and smooth steel contamination with glycerol. (SRA+SRB =
SRC)

Sole Material

Nitrile rubber is a synthetic rubber copolymer of acrylonitrile and butadiene. It is used

in the protective industry due to its resistance to fuel and oils. Nitrile rubber is more
N Nitrile Sole
resistant to oils and acids than natural rubber, but has inferior strength and flexibility
and has greater puncture-resistance than natural rubber.
Polyurethane is a synthetic soling material. It is flexible and lightweight. Resistant to
90°C heat, oil, low concentration acids/alkalis and solvents. With dual density (PU/PU),
Polyurethane (PU)
PU you are given an inner foam layer and harder outer layer to ensure comfort and
Sole
durability. Resistant to 120°C heat, oil, low concentration acids/alkalis and solvents. * (*
If marked HRO then 300°c)
The material generally identified as rubber is vulcanised caoutchouc. Caoutchouc is
produced from the latex sap collected from caoutchouc trees. Because unvulcanised
R Rubber Sole caoutchouc breaks when cold and stinks when warm, it is vulcanised which also makes
it into a durable raw material. Resistant to 200°C heat, oil, low concentration
acids/alkalis and solvents. * (* If marked HRO then 300°c)
Vulcanisation is a chemical process for converting rubber or related polymers into
Vulcanised Rubber more durable materials. Heat and pressure cause the rubber to crosslink and expand
VR
Sole which fully vulcanises the sole. The sole is moulded into a very specific outer sole
shape.

Polyvinyl Chloride is a water-resistant polymer resistant to minerals, vegetable oil and

PVC PVC Sole fats, animal by-product, manure, disinfectants and various chemicals. Resistant to 90°C
heat, oil, low concentration acids/alkalis and solvents.
Polyvinyl Chloride is combined with the tough rigid material Nitrile to produce a
PVN PVC / Nitrile Sole harder wearing sole unit. Resistant to 100°C heat, oil, low concentration acids/alkalis
and solvents

Rubber outsole /
RPU Rubber and polyurethane combining to ensure a hardwearing comfortable light sole.
PU Interlayer

Thermoplastic
TPU provides a softer, more flexible material for high quality soles in hiking boots and
TPU Polyurethane
safety footwear. TPU offers superior wear resistance and abrasion resistance.
(TPU) Sole

14
 Introduction Foot Protection

Upper
Leather is a processed and refined natural product. The many positive properties of leather make
it well suited as a material to make most of Safety footwear. It is chosen because of its durability,
Leather elasticity and its ability to keep its shape. Leather has an ability to hold heat whilst also resisting
moisture. Leather boots are supportive and typically last longer and are a good choice when
working in harsh conditions.

Leather/Mesh uppers is where the upper is crafted from a synthetic mesh material and overlaid
with stitched leather. The benefits of having leather and mesh, allows for breathable footwear,
Leather/Mesh particularly in industries where the wearer is on their feet all day. These materials may often be
water-resistant treated; given longer life. Nylon mesh and leather combination boots are ideal for
warmer weather because they are lightweight, flexible and breathable.
Nubuck is a top-grain rawhide leather giving strength, thickness and resistance to wear. It is a
particularly fine leather that has been lightly sanded on the grain side and therefore been given a
Nubuck satiny character. Fine calfskins and cowhides are usually used for Nubuck leather. It is ideal in
footwear because it remains water-resistant for a long time after waxing. The material is
extremely supportive and a good choice for tough working comfort.
Suede is a generic term for a type of leather with a roughened surface that is sanded onto the
flesh or grain side of the leather. Suede is made from grainy hide or from flesh splits; the flesh side
Suede
is sanded and lies on the outside. Suede flesh split hides are usually understood to mean that the
side facing the grain side is worked.
Polyvinyl Chloride is a water-resistant polymer resistant to minerals, vegetable oil and fats, animal
PVC
by-product, manure, disinfectants and various chemicals.

Nitrile rubber is a synthetic rubber copolymer of acrylonitrile and butadiene. It is used in the
protective industry due to its resistance to fuel and oils. Nitrile rubber is more resistant than
Nitrile
natural rubber to oils and acids, but has inferior strength and flexibility and has greater puncture-
resistance than natural rubber.
Soft Shell is a tightly woven fabric renowned for its breathability, and coated with a durable water
Soft shell
repellent (DWR) finish.
Synthetic These are materials other than genuine leather which are designed to look and function like
Leather leather.

15
Foot Protection Introduction

Features
A steel shank in the midsole offers underfoot protection with a penetration resistance of 1100
Steel Insole
Newtons.
Composite Cap Non-metallic, lightweight protection for the toes.
Anti-
Penetration Non-metallic, lightweight underfoot protection against sharp objects.
Synthetic Insole
These are hooks at the top of the boot allowing the wearer to put on and remove footwear
Speed Lacing
with speed and ease.

Pull on loop at
Allows wearer to put on and remove footwear with speed and ease.
rear or side
The upper and sole are heat-sealed and stitched together creating a durable last. Tough metal
Goodyear Welt
is used (similar to a staple) to fasten the upper and welt in the internal part of the shoe.
Bump Cap Protects the toe cap from damage and scuffing promoting longer wear.
Gusset Tongue Prevents debris from entering footwear
Padded Collar Provides wearer comfort and protects the Achilles tendon
A padded tongue provides excellent wearing comfort and prevents painful pressure points on
Padded tongue
the foot.
Perforated
Perforations provide air circulation in the shoe making the footwear comfortable to wear.
upper
Metatarsal
Protects the metatarsal area of the foot.
Protection
Heel kick panel A kick panel on the heel of the boot allows for quick and easy removal of footwear.
Side Zip Quick access side-zip allows wearer to put on and remove footwear with speed and ease.
Alignment loop Alignment of the tongue on footwear allows for comfortable wear at pressure points,
on tongue preventing rubbing in the footwell.
Twin gusset Dual elasticated gussets for simple pull-on wear.
Antibacterial
Prevents the build-up of bacteria within the footwear giving longer product life.
foot bed

16
 Introduction Foot Protection

Types of Eyelets

D-Ring lace
Industrial standard heavy-duty metal D-Ring lace holds
holds

Hexagonal
Industrial standard heavy duty hexagonal metal eyelets
eyelets

Non-metallic Non-metallic components are used in metal free footwear, eyelets are usually
eyelets made of a heavy-duty plastic or synthetic material.

An alternative to eyelets, giving a lighter weight, non-metallic, heavy duty

Loop-lacing
textile or synthetic lacing system.

Perforated The eyelets are perforated directly into the leather. Ideal for lighter duty
eyelet environments.

Size Chart:

USA UK EUROPE

6 5 38

7 6 39

8 7 41

9 8 42

10 9 43

11 10 45

12 11 46

13 12 47

14 13 48

15 14 49

17
 Foot Protection Introduction

Diagram of Typical Safety Shoe (with Anti-penetration insole)

DIP - Direct Injection Process)

18
 FORCE ALLIGATOR BLACK BOOT

FORCE ALLIGATOR BLACK BOOT

Foot Protec�on
Code: VLEBL-0010-PR
Colour: Black | Size: 3-15

Features
• Cow leather upper
• Breathable & comfortable non-woven grey felt lining
• Non-Woven anti-static insole
• High Density PU sole which is slip and abrasion
resistant too
• Steel toe cap (200 Joule impact resistance)
• Low density Polyurethane midsole for excellent shock
absorption and comfort
• High Density PU heat-resistant (90°C) sole

PRIDE H-BADGER BLACK BOOT STC

PRIDE H-BADGER BLACK BOOT STC

Code: VLEBL-0002-PR-SZ
Colour: Black | Size: 3-15

Features
• Buffalo printed Barton leather Upper
• Padded PU Ankle Support
• Breathable and comfortable Non-Woven Taibrelle
lining
• High Density PU heat-resistant (120°C) sole which is
Slip and Abrasion resistant
• Extra wide and high Steel Toe Cap (200 Joule Impact
Resistance)
• Low density PU midsole for excellent shock absorption
and comfort

PRIDE CHELSEA BLACK BOOT STC

PRIDE CHELSEA BLACK BOOT STC

Code: VLEBL-0003-PR-SZ
Colour: Black | Size: 5-13

Features
• Premium Grain Amina Leather Upper
• Breathable and comfortable Taibrelle lining
• High Density PU heat-resistant (120°C) sole which is
Slip and Abrasion resistant
• Steel Toe Cap (200 Joule Impact Resistance)
• Low Density PU midsole for excellent shock absorption
and comfort

19
 PRIDE MERU NSTC BOOT

S PRIDE MERU NSTC BOOT

Foot Protec�on
Code: VLEBR-0009-PR-SZ
Colour: Brown/Black | Size: 5-13

Features
• Smooth Premium Grain Buff Crazy Horse Leather
Upper
• Breathable and comfortable Air Mesh Fabric lining
• Non Metallic Anti-Penetration Insole
• High Density PU heat-resistant (120°C) sole which is
Slip and Abrasion resistant
• Steel Toe Cap (200 Joule Impact Resistance)
• Low density PU midsole for excellent shock absorption
and comfort
• Metal free boot

SHOE LADIES LEATHER BLACK STC COURT

LADIES SAFETY SHOE JENNIFER 55005

53001
Code: VLEBL-0005-BE-SZ
Colour: Black | Size: 2-9

Features
• Single density PU Sole
• Heat resistant up to 95°C
• Slip on for ease of use
• Full grain leather upper
• Padded quarter for additional comfort
• Standard with a woollen top sock for added comfort
• Antistatic

LADIES SAFETY SHOE JENNIFER 55005

LADIES SAFETY SHOE JENNIFER 55005

Code: P1539
Colour: Black/Pink | Size: 3-8

Features
• Leather upper
• Dual density PU sole
• Heat resistant up to 95°C
• Steel toe cap (200 Joule Impact Resistance)
• Padded collar and tongue for extra comfort
• Standard with a woollen Top Sock for added comfort
• Antistatic

20
 FORCE PVC GENERAL PURPOSE BLACK GUMBOOT
Foot Protec�on

GUMBOOT
FORCE PVC GENERAL PURPOSE BLACK
Code: VPVBL-0008-FO-Size
Colour: Black | Size: 4-12

Features
• Unisex
• Knee Length PVC
• Hard wearing
• No steel toe cap
• Excellent Grip
• Sole Support

PRIDE PVC BLOOD + FAT RESISTANT WHITE

PRIDE PVC BLOOD + FAT RESISTANT
WHITE GUMBOOT

GUMBOOT
Code: VPVWH-0001-ST-SZ
Colour: White | Size: 4-12

Features
• Unisex
• Hard wearing with grip and sole support
• Blood and Fat Resistant
• No Steel Toe Cap
• Knee Length PVC
• Hard wearing
• Excellent Grip
• Sole Support

STORM PVC ANTI-BACTERIAL WHITE GUMBOOT

STORM PVC ANTI-BACTERIAL WHITE
GUMBOOT

Code: VPVWH-0002-ST-SZ
Colour: White/Grey | Size: 4-12

Features
• Unisex
• Blood and Fat Resistant
• Anti-bacterial properties
• No Steel Toe Cap
• Knee Length PVC
• Hard wearing
• Excellent Grip
• Sole Support

21
Notes

22
Hand Protection
23
Introduction Hand Protection

Through our network of premium suppliers, as well as our house brands, Select PPE offers a comprehensive portfolio of
hand protection, suitable for your every need. Combining comfort, protection and ergonomics for user safety, our range
of gloves is suited for all uses in amy environment. Our aim is to guarantee comfort, safety and suitability - at an
affordable price.

Knitted gloves
Knitted gloves are produced on automated machines ensuring consistency during production. A variety of yarns are used
with carefully selected properties to give excellent cut resistance, dexterity and breathability. A wide range of coatings may
be applied to enhance physical properties such as grip, chemical protection and liquid resistance amongst others.
Cut and sewn gloves
Cut and Sewn gloves, as the name suggests are made by sewing together the individual pieces of the glove usually by hand.
This may result in slight differences in glove sizing, for example, and also introduces possible weaknesses in seams and
stitching. This method is most commonly used in raditional leather gloves, but also used with other synthetic materials.
Supported gloves
Supported gloves are usually based on a knitted liner which is then dipped in the coating material. These gloves offer good
all-round performance and are available with various coatings, nitrile rubber and Polyvinyl Chloride (PVC) being the most
common.
Unsupported gloves
Un-supported gloves are similar to supported gloves, but do not have the inner liner. These can be made from a variety of
materials suachh as latex, nitrile, PVC or mixtures of different compounds.
The choice and combination of raw materials during manufacturing is essential to ensure the expected results:
• Natural Latex: Excellent resistance to equeous chemical products.
• Neoprene: resists diluted acids and petroleum products.
• NBR (Nitrile Butadiene Rubber): Excellent resistance to petrolium products and solvents as well as to perforation.
• PVC: Very high abrasion resistance.
• Butyl: Good resistance to ethers and ketones.

Selecting the correct safety gloves

There are many factors that must be considered when selecting the appropriate safety gloves. To help you make the best
choice, clear guidelines include helpful symbols for selecting safety gloves for specific application.

1. Identify and classify risk potential - What is the main risk for users in the workplace?
The symbols provide initial guidance to help you choose the right category for the appropriate safety gloves.
2. Determine individual requirements of the safety gloves. Which activities will primarily be carried out at the workplace in
question?
Will the nature of the work require precision, entail interchangeable all-round activities or place high demands on the
wearer and the safety gloves?

Precision All-round Heavy duty

Activities where a high level of General, multiple activities for Tough activities requiring
sensitivity is necessary. which robust, stable safety gloves extremely robust, abrasion resistant
are required. safety gloves.
Examples: fine assembly work, Examples: servicing, transport Examples: heavy transport work
working with small parts (e.g. work, light metal processing, (e.g. pallet transport), construction,
screws), operating controls, end standard assembly work, servicing.
inspection. maintenance.

24
Introduction Hand Protection

3. Define the application environment. Identify the general conditions of the workplace.
Will activities be carried out in wet / oily, damp or dry working conditions? All our safety gloves come with one of
these 3 environment classification recommendations. The degree of suitability is determined by the respective
amplitude level.

Working areas that do not have any moisture (water, oil, fat, cooling lubricant, etc.). Safety gloves for these
conditions are extremely breathable. Examples: quality control, assembly work, distribution, end processing.

Working areas with some moisture. Safety gloves for these conditions are less breathable. The water/oil-
repelling coating is crucial and guarantees slip-resistance. Examples: oil-coated parts, changing between dry
and damp working environments.

Working areas in which hands should be protected from liquids (not chemicals). Sealed safety gloves with
high slip-resistance are necessary. Examples: removing oily/wet parts from machines, outdoor activities
(weather-related humidity).

Hand Protection – Standards & Legislations

Protective Gloves: General Requirements

EN 420 2003 + A1: 2009

This standard defines the general requirements for glove design and construction, innocuousness, cleaning instructions,
electrostatic properties, sizing, dexterity, water vapour transmission and absorption along with marking and information.

PROTECTIVE GLOVES AGAINST MECHANICAL RISKS

EN 388 - 2016 EN388:2003
Standard specifies physical and mechanical aggression caused by abrasion, blade cut, tearing and puncture. EN388:2016
updates the existing standard with this new test method for abrasion, blade cut & impact resistance. EN ISO 13997:1999
(TDM test) records cut results as a Newton value - the force of the blade on the glove material needed to cut through the
material 20mm. The results are represented on a scale A-F.

The ‘mechanical risks’ pictogram is accompanied by a 6-unit code (a-f).

a. Abrasion Resistance
Based on the number of cycles required through the same glove.
b. Blade cut Resistance
Based on the number of cycles required to cut through the sample at a constant speed.
c. Tear resistance
Based on the amount of force required to tear the sample.
d. Puncture Resistance
Based on the amount of force required to pierce the sample with a standard-sized point.
e. ISO Cut Resistance
Based on the force required to cut through a sample using a specified cut test machine under specified conditions.

25
Hand Protection Introduction

EN Impact Protection
Based on the measured transmission of energy and force when the sample experienced a dropped load.

EN388 Revised Coup Cut Test EN388

2016 2003
EN388:2016 EN388:2003
- Max 60 Cut cycles - Unlimited Cut cycles
- Cut Test Time x 5 - Cut Test Time x 3
1 3 1 2 E P
REQUIREMENTS
PERFORMANCE LEVEL P
IMPACT RESISTANCE:
Impact -resistant proper�es to 5J
PERFORMANCE LEVELS A-F
STRAIGHT BLADE CUT RESISTANCE:
(TDM cut test) Measures the average load to
achieve the moment of cut-through
PERFORMANCE LEVELS 1-4
d: PUNCTURE RESISTANCE:
Force required to pierce the sample with a standardised punch.
PERFORMANCE LEVELS 1-4
c: TEAR RESISTANCE:
Maximum force required to tear the sample.

PERFORMANCE LEVELS 1-5

b: BLADE CUT RESISTANCE (Coup cut test):
Number of cycles required to damage the sample at constant speed.
PERFORMANCE LEVELS 1-4
a: ABRASION RESISTANCE:
Number of cycles required to damage the sample at constant speed.

EN407 Protec�ve Gloves Against Thermal Risks

(Heat and/or Fire) EN 407:2004
(AS/NZS 2161.4)
This standard specifies thermal performance for protec�ve gloves
against heat and/or fire. The heat and flame pictogram is accompanied
1 3 1 2 1 2 by a 6 digit number.

REQUIREMENTS
PERFORMANCE LEVELS 1-4
f: RESISTANCE TO A LARGE MELTING METAL SPRAY:
Amount of spray required to raise the glove to a certain
temperature
PERFORMANCE LEVELS 1-4
e: RESISTANCE TO A SMALL MELTING METAL SPRAY:
Amount of spray required to raise the glove to a certain
temperature
PERFORMANCE LEVELS 1-4
d: RESISTANCE TO RADIATING HEAT:
Time required to raise a given temperature level
PERFORMANCE LEVELS 1-4
c: RESISTANCE TO CONVECTIVE HEAT:
Time during which the glove is able to delay the transfer of heat of a flame

PERFORMANCE LEVELS 1-4

b: RESISTANCE TO CONTACT HEAT:
Amount of spray required to raise the glove to a certain temperature
PERFORMANCE LEVELS 1-4
a: RESISTANCE TO FLAMMABILITY:
Amount of spray required to raise the glove to a certain temperature
26
Introduction Hand Protection

B: RESISTANCE TO CONTACT HEAT:

PERFORMANCE LEVEL CONTACT TEMPERATURE ( oC) THRESHOLD TIME (Seconds)

1 100 oC ≥15s
2 250 oC ≥15s
3 350 oC ≥15s
4 500 oC ≥15s
EN12477: Protective gloves for welders

This standard specifies how the gloves are designed to provide protection for both hand and wrist while welding
or similar work, this is a combination from testing EN 388 and EN 407. Welding gloves shall provide resistance to
small splashes of molten metal, short exposure to convective heat, to radiant heat and to contact heat. The welding
gloves shall give protection from mechanical risks as well.
Type A refers to gloves that provide a higher protection against heat.
Type B refers to gloves that provide a lower protection against heat, but are more flexible and pliable.

Standard for manual metal welding

TYPE B (HIGH DEXTERITY, TIG,

REQUIREMENTS (EN LEVELS) TYPE A
WELDING)
Abrasion 2 1
Cut 1 1
Tear 2 1
Puncture 2 1
Burning Behaviour 3 2
Contact Heat 1 1
Convective Heat 2 -
Small Splashes 3 2
Dexterity 1 4
Type B gloves are recommended when high dexterity is required (e.g., TIG welding), while Type A gloves are recommended for
other welding processes. Type A or B is to be marked on the products, its packaging, and in the instructions for use

Protective Gloves: Against Chemicals and Micro-Organisms (AS/NZS 2161.3)

EN 374-1: 2003 (AS/NZS 2161 .10.1) This European standard specifies the requirements for gloves to protect
the user against chemicals and/or micro-organisms and defines terms to be used.

EN 374-2:2003 (AS/NZS 2161 .10.2) This European Standard specifies a test method for the penetration
resistance of gloves that protect against chemicals and /or micro-organisms.

EN 374-3: 2003 (AS/NZS 2161 .10.3) This European Standard specifies the determination of the
resistance of protective glove materials to permeation by potentially hazardous nongaseous chemicals
under the condition of continuous contact.

Gloves must prove that they are an effective barrier against liquids and microorganisms. Performance levels are
according to Acceptable Quality Levels (AQL) whereby samples are taken from a batch of gloves and tested
during production for pinholes and leaks by either inflation with air or by filling with water. Gloves must meet at
least level 2, to be considered micro-organism resistant. (Level 1 = AQL 4.0) (Level 2 = AQL 1.5) (Level 3 = AQL 0.65)

The “Low Chemical Resistant” or “Waterproof” glove pictogram is to be used for those gloves that do not achieve
a breakthrough time of at least 30 minutes against at least three chemicals from the defined list, but which comply
with the penetration test.

27
Hand Protection Introduction

Code Chemical Class

A Methanol Primary alcohol
B Acetone Ketone
C Acetonitrile Nitrile compound
D Dichloromethane Chlorinated paraffin
E Carbon disulphide Sulphur containing organic compound
F Toluene F Aromatic hydrocarbon
G Diethylamine Amine
H Tetrahydrofuran Hetero-cyclic and ether compound
J Ethyl acetate Ester
K n-Heptane Saturated hydrocarbon
L K Sodium hydroxide 40% Inorganic base
Sulphuric acid 96% Inorganic Mineral Acid

Passage time measured Performance index

(min) to permeation
 10 1
 30 2
 60 3
 120 4
 240 5
 480 6

EN1149

Protective Clothing: Electrostatic Properties

EN 1149 - 1:2006
This European Standard specifies a test method for materials intended to be used in the manufacturing of
electrostatic dissipative protective clothing (or gloves) to avoid incendiary discharge. This test method is not
applicable for materials to be used in the manufacturing of protection clothing or gloves against mains voltages.

EN 1149 - 5:2008
Protective Clothing - Electrostatic Properties - Part 5. Material Performance and Design Requirements.
This European standard is part of a series of standards for test methods and requirements for electrostatic
properties of protective clothing. The standard specifies material and design requirements for garments used as
part of a total earthed system, to avoid incendiary discharges. The requirements may not be sufficient in oxygen
enriched flammable atmospheres. This standard is not applicable for protection against mains voltages.

ESD GLOVES
ESD gloves are used to divert static electricity. Surface resistivity is tested according to methods
specified in EN1149-1 but test samples must meet the requirements of EN1149-5.

CE Food Safe
European legislation with respect to Food Contact Materials (Directive EC1935/2004) requires
that food contact materials shall not transfer their ingredients to food and must not modify
t h e o r g a n o l e p t i c p r o p e r t i e s ( i . e . c o l o u r, s m e l l , t e x t u r e a n d t a s t e ) o f t h e f o o d . P r o d u c t s
intended for food contact shall be labelled as such.

Protective Gloves Against Cold EN 511:2006 (AS/NZS 2161.5)

The European Standard specifies the requirements and test methods for gloves which protect
against conductive cold down to -50 degrees Celsius. This cold can be linked to the climate
c o n d i t i o n s o r a n i n d u s t r i a l a c t i v i t y.
28
Introduction Hand Protection

GENERAL GLOVE INDUSTRIAL USE:

DISPOSABLE GLOVES FABRIC GLOVES LEATHER GLOVES CHEMICAL RESISTANT GLOVES
Disposable gloves, constructed Constructed using co�on or fabric Leather is a tradi�onal material Manufactured from rubber,
using plas�c to protect against mild material, used to insulate the hands used to protect against injuries neoprene, polyvinyl alcohol or
irritants from heat or cold. Used for enhanced from rough abrasive surfaces. vinyl etc. These gloves protect
grip and handling slippery objects Ideal for use in welding hands from corrosives, oils, and
applica�ons. solvents

GLOVE LINER TYPES

KNITTED Highly breathable, close fi�ng with good dexterity

SEAMLESS Avoids hand irrita�ons due to no seams, increase comfort

Available with several types of construc�on and assembly, mainly cut and sewn. Coa�ng is bound to the
SEWN & IMPREGNATED
fabric for good resistance to abrasion. Sewing and impregna�on process allows the manufacturing of thin
gloves, for enhanced dexterity
Made by dipping a kni�ed or woven cloth liner into the glove compound - the liner “supports” the
COATED/ DIPPED
compound and adds strength. Compound used enhances the mechanical performance, different compounds
are used for different condi�ons
GLOVE LINER MATERIAL
LEATHER: LEATHER:
PARA
COTTON POLYESTER NYLON ACRYLIC HPPE GLASS FIBRE SMOOTH SPLIT GRAIN
ARAMID
GRAIN
High
Cut
performance Durable, supple, Abrasion
Stretch / Resistance /
Comfort / Cut Resistance, oil & water Resistance,
Durability Elas�city Insula�on Heat Cut Resistance
Breathability Comfort, repellent Durable. Dry grip
Resistance
Abrasion
Resistance

DIPPING MATERIAL
NITRILE
NITRILE NEOPRENE PU LATEX PVC TPR TPV
FOAM
Good
Excellent Good abrasion
abrasion
resistance to snag, Dry, wet and oil resistance. Dry, wet and
Oil and wet grip resistance. Dry and wet grip Impact Protec�on Impact Protec�on
cut, puncture and grip oily grip
Dry grip
abrasion. Dry grip

CUFF STYLE
UNSUPPORTED SUPPORTED SAFETY
BEADED STRAIGHT PINKED GAUNTLET KNITWRIST SLIP ON CUFF
GLOVES GLOVES CUFF
Moulds are dipped Op�mised liquid Addi�onal Tradi�onal A liner is dipped Addi�onal Securely fits Provides Easy donning,
directly into a protec�on with length which style, improved into a compound length which gloves in place addi�onal economical
compound increased cuff protects edge grip for material. This protects and prevents wrist design
material, giving the strength forearm from ease of donning absorbent liner forearm dirt from protec�on
wearer maximum liquid runoff and glove provides (10cm plus) entering the
dexterity. There removal improved glove
are two op�ons, comfort during
unlined or flock- wear and adds
lined with co�on strength and
or rayon polyester durability to the
for improved glove
comfort

29
Hand Protection Introduction

Material High Glass HPPE,

Polyester Tenacity Fibre & Steel & Kevlar
Features Cotton Kevlar HPPE Synthetic Nylon & Steel
Features & Nylon Nylon Nylon Glass
Cut Very Very Very
Poor Poor Average Good Excellent Excellent
Resistance Good Good Good
Tear
Resistance Average Average Average Excellent Excellent Poor Excellent Excellent Excellent
Very Very
Comfort Good Good Excellent Excellent Poor Good Good
Good Good
Heat Very
Good Poor Average Poor Poor Poor Poor Average
Resistance Good
Cold Very
Resistance Good Average Good Average Average Average Average Average
Good
Sweat Very
Poor Poor Average Good Poor Poor Good Poor
Absorption Good

Elasticity Poor Average Poor Poor Poor Poor Poor Poor Poor

Yarn Costs Very Low Very Low Low High High Low Medium High High

30
 RUBBER HOUSEHOLD GLOVES

RUBBER HOUSEHOLD GLOVES

Hand Protec�on
Code: P223
Colour: Yellow | Size: M-L

Features Specifications
• Good grip for wet surfaces • 180gsm/pair
• Good dexterity
• Latex material

GREEN NITRILE GLOVES

GREEN NITRILE GLOVES

Code: P1089
Colour: Green | Size: S-XL

Features Specifications
• Good grip for wet surfaces • Outstanding abrasion resistance
• Good dexterity

PRIDE PVC FULLY COATED SMOOTH FINISH GLOVES

FINISH GLOVES
PRIDE PVC FULLY COATED SMOOTH

Code: GPVRE-0056-PR-000, GL-P5115-XING

Colour: Red | Size: L

4121

Features
• Cotton interlock shell
• PVC coated, smooth finish
• Ultra supple seamless, PVC dipped glove provides
protection against a wide range of chemicals and oils
• 20 cm long cuff

31
 PRIDE DISPOSABLE NITRILE NON STERILE

GLOVES
PRIDE DISPOSABLE NITRILE NON STERILE

Hand Protec�on
GLOVES
Code: GNIBL-0030-PR-0XL, GL-D5000-XING
Colour: Blue | Size: L, XL

Features Specifications
• Nitrile non surgical powder-free gloves • Nitrile Material
• 100 Pieces per box • 0.10mm thick and 240mm long
• Protects against wide array of chemicals
• Rolled cuff
• Ambidextrous

32
Notes

33
Head Protection
34
Head Protection Introduction

At Select PPE, through our network of premium suppliers, we offer a range of safety helmets and head
protection. These safety helmets and accessories offer secure and comfortable protection. Our range of head
protection features elegant, lightweight shell designs, adjustable fittings and comfortable padding. The range
of ratchet-adjustable designs uses the natural shape of the head to create a firm but comfortable
fit, guaranteeing the user a superior level of comfort throughout the day.

HARD HAT

A hard hat is a type of helmet predominantly used in environments such as industrial or construction sites, to
protect the head from injury due to falling objects, impact with other objects, debris, rain, and electric shock.
Hard hats could be combined with face protection and hearing protection products.

EN 397 The standard industrial safety helmet

standard

The standard for high performance

EN 14052
industrial safety helmets

EN 12492 The standard for mountaineers

EN 50365 The standard for electrical insulation

BUMP CAP

A bump cap is a lightweight hard hat using a simplified suspension or padding and a chin strap. Bump caps are
used where there is a possibility of scraping or bumping one's head on equipment or structure projections, but
are not sufficient to absorb large impacts, such as that from a tool dropped from several stories.

EN 812 The standard for for industrial bump caps

35
 SINGLE ELASTIC WHITE MOP CAP

Head Protec�on
SINGLE ELASTIC WHITE MOP CAP
Code: DPPWH-0018-FO-018
Colour: Various | Size: 18 inch

White DPPWH-0018-FO-018
Light Blue DPPLB-0019-FO-018
Black DPPBL-0020-FO-018
Yellow DPPYE-0021-FO-018
Green DPPGR-0022-FO-018

Features Specifications
• Single-use, disposable mop caps • Material: Spunbound polypropylene
• Made from spunbound polypropylene, a non-woven
material with a porous design that allows airflow and
breathability
• Secures hair and minimises the risk of contamination
• The soft construction ensures not only comfort but
security too
• Elasticated trim accommodates a variety of hairstyles
• Double Stitch Elastic ensures secure fit & protects
the mop cap from breakage

DOUBLE ELASTIC WHITE MOP CAP

DOUBLE ELASTIC WHITE MOP CAP

Code: DPPWH-0012-FO-021
Colour: Various | Size: 21 inch

White DPPWH-0012-FO-021
Light Blue DPPLB-0013-FO-021
Black DPPBL-0014-FO-021
Yellow DPPYE-0016-FO-021
Green DPPGR-0017-FO-021

Features Specifications
• Single-use, disposable mop caps • Material: Spunbound polypropylene
• Made from spunbound polypropylene, a non-woven
material with a porous design that allows airflow and
breathability
• Secures hair and minimises the risk of contamination
• The soft construction ensures not only comfort but
security too
• Elasticated trim accommodates a variety of hairstyles
• Double Stitch Elastic ensures secure fit & protects
the mop cap from breakage

HEAD SCARF
HEAD SCARF

Code: HPCLB-0023-PO-000
Colour: Dusk Blue | Size: Universal

Features Specifications
• Compliments the Frances dress (See Workwear) • Polycotton
• Promotes Hygiene

36
 TULLE BASEBALL CAP
Head Protec�on

TULLE BASEBALL CAP

Code: HCORE-0025-CE-000
Colour: Various | Size: Universal

Green HCOGR-0024-CE-000
Red HCORE-0025-CE-000
Black HCOBL-0026-CE-000
White HCOWH-0027-CE-000

Features Specifications
• Baseball cap with metal clip size adjustment • 100 % cotton

RIOM BASEBALL CAP

RIOM BASEBALL CAP

Code: HCOBL-0028-CE-000
Colour: Black with silver reflective | Size: Universal

Features Specifications
• Baseball cap with reflective trim and velcro • 100 % cotton
size adjustment

37
Notes

38
Respiratory Protection
39
Introduction Respiratory Protection

Through its network of premium suppliers, Select PPE offers you a wide range of disposable, reusable,
powered and supplied air respirators for protection against gases, vapours and particulates. This allows you
to choose the level and type of protection, comfort, style and maintenance requirements you need to work
safely, comfortably and effectively.

Four step Guide

Before selecting Respiratory Protective Equipment (RPE), a full risk assessment must be carried out in
accordance with the relevant health and safety legislation. Where respirators are used in the workplace, a
formal RPE programme should be implemented. It should include:

• Identification of the hazard and risk assessment.

• Education and training must be properly emphasised and conducted.

• Maintenance, cleaning and storage programmes must be established and routinely followed for reusable
respirators.

• The whole programme must also be reviewed at regular intervals.

To correctly select RPE four basic steps should be followed:

1. Identify the potential hazard.

Before any selection of respiratory protective equipment can be made, it is
important to identify the hazard against which you wish to protect. These
hazards can be divided into dusts, mists, fumes, gases and vapours.
Consideration may need to be given to oxygen deficiency and even extremes
of temperature. No respirator is ideal for all these types of hazard. For
example, respirators fitted with dust filters will not protect against gases or
vapours and gas/vapour filters will not protect against dusts.

2. Understand and assess the contaminant’s potential health effects.

Once the material against which you wish to provide protection has been
identified, it is important to understand how that contaminant may affect
your body. This information forms a vital part of the training the users
receive and allows them to understand why they should wear the equipment
provided. Also assess the level of contaminant in the workplace versus its
Workplace Exposure Limit (WEL).

3. Select the appropriate Respiratory Protective Equipment (RPE).

The RPE comes in a wide variety of types, each suitable for a particular range
of applications. Although the type of application of certain RPE may overlap,
no respirator is ideal for all applications and care should be taken to
understand the limitations of any respirator before selection. The respirator
selected must be correct for the work, the environment and the wearer, and
not interfere with other PPE.

4. Train the employees in the use and care of the respirator.

Once the respirator has been correctly selected for a hazard, the application
and the individual wearer, it is essential to train the wearer in the correct
fitting, use, maintenance and care of the respirator. It is also important to
demonstrate the fitting of the respirator and how to conduct a face fit check.
A Face Fit test should be performed on wearers of respirators with tight
fitting facepieces i.e. disposable respirators and reusable half or full face
masks. 40
Introduction Respiratory Protection

There are three main types of respiratory protection available:

Disposable Respirators

• Ideal for most industries and applications where wearers require particulate protection e.g. dusts
and mists.
• A choice of cup-shape or flat-fold, valved or unvalved and also the option to protect against ozone
and nuisance levels of organic vapours and acid gases.
• Available in two types to satisfy single shift use (NR) and reusable (R) requirements.
• Lightweight and maintenance free.
• Comfortable, convenient and easy to use.

Reusable Half and Full Face Respirators

• Offers protection against particulates, gases and vapours, and combinations of the two.
• These respirators have integrated or replaceable filters and parts. They may be cleaned, stored and
reused provided that they are in good condition.
• Full face respirators also offer integrated eye and face protection.
• Many models are fully maintainable.

Powered Air & Supplied Air Systems

• Offer protection against dusts, mists, fumes, gases, vapours and combination hazards e.g. paint spray.
• May offer integrated eye, face, head, neck and hearing protection in one system avoiding
incompatibility issues between items of Personal Protective Equipment (PPE) items.
• Modular system allows for the combination of parts as ore’s environment or application changes
providing the ultimate in flexibility and ease of use.
• No increase in breathing resistance means more comfort and longer wear time.
• Usable by a wide range of users regardless of facial characteristics; shape, size, etc.

Disposable Reusable Reusable Powered &

Disposable
Half Face Full Face Half-Face Supplied Air

41
Respiratory Protection Introduction

Identify the Hazards

Performance
Application
Level
Rust, Metal Particles, Filler FFP1
Concrete, Stone FFP1
Sanding, Cement, Wood, Steel FFP2
Cutting,
Paints/ Varnish/ Anti-rust coating FFP2
Drilling
Steel, Stainless Steel FFP3
Anti-Fouling Varnish FFP3
Low temperature / oil spray FFP2
Mild Steel, Zink (Autogen, MIG/MIK) FFP2
Welding Stainless steel (Electrodes) FFP2
Soldering FFP2
Work with Asbestos Small amounts infrequent exposure FFP3
Work with Glass and Mineral fibres FFP2
Waste Sorting FFP2
Paint spray FFP3
Spraying
Pesticides (water based) FFP4
Utility Maintenance (e.g. filter FFP3
change)
Pollen, Animal dander FFP1
Allergies
Grain dust FFP2
Mould / Fungus FFP2
Contact with: Bacteria FFP2
Diesel exhaust/Smoke FFP2

42
Introduction Respiratory Protection

Select the Correct Respirator

Once you have selected the protection factor you require, consider whether you need a cup-shaped
respirator, or a foldable respirator, whether it has buckled straps and whether it is valved or not.

Cup-shaped respirators

• Convex shape, nose clip and twin strap design

• Easy to fit
• Durable, collapse resistant shell

Buckle Strap respirators

Robust and durable design provides multishift capability and secure feel

Foldable Respirators

• Ultra soft, flexible and comfortable fit resulting from the multiple panel design

Valved Respirators

• Effective removal of heat build-up provides a cooler and more comfortable

wear
• Provides longer continuous wear time
• Reduces risk of fogging of spectacles and eyewear

Reusable Respiratory Protection

Filter Type
Type Colour Code Description

A
Organic Vapours and Gases with
boiling point 65° and above

B Inorganic Vapours and Gases

(excluding Carbon Dioxide/ Monoxide)

E
Sulphur Dioxide and Other Acidic
Vapours and Gases

K
Ammonia and Ammonia Derivatives
Vapours and Gases

ABEK Combination filter, all of the above

43
Respiratory Protection

Identifying the Hazards:

Typical
Application Hazard
Protection
Solvent-Based Paint** A2P3 R
Anti-Fouling Paint Spraying/ Grinding A2P3 R
Painting, Spraying, Vanishing, Water Soluble Paint A1P2 R
Coating Solvents, Resins, Synthetic Resins** A2P3 R
Latex-Paint, Residual Solvents A2P3 R
Wood Preservatives A1P2 R
Maintenance Disinfection, Cleaning* ABEK1P2 R
Decoration Spray-On Glue, Foam, Varnish, Adhesive A1P2 R
Waste Removal Bacteria, Spores, Odours A1P2 R
Agriculture Pesticides, Insecticides ABEK1P2 R
Wood Treatment Bonding, Spray-On Glue A2P3 R
Tarring A2P3 R
Construction, Grinding, Sealing A1P2 R
Cutting, Drilling
Spray Foam Insulation A1P2 R
Organic Solvent / with boiling point less than 65OC AXP3 R
Ammonia Based Paint Remover ABEK
Coating Polyurethane Coating** ABEK1P3 R
Solvent Based Varnish A2
Water Based Varnish A1
Bonding Solvent Containing Varnish A1
Handling Sulphur Dioxide ABE
Hydrochloric Acid ABE
Liquid Manure ABEK
Handling Ammonia K
Formaldehyde A1 + Form
Hazardous goods storage/ transport ABEK1P3 R
Warning: This guide is only an outline. It should not be used as the only means for selecting a
respirator. Details regarding performance and limitations are set out on the respirator package and
user instructions. Before using any of these respirators, the wearer must read and understand the
user instructions for each product. Specific country legislation must be observed.
* excluding Formaldehyde.

44
Respiratory Protection Introduction

Check the Risk:

Application limits for reusable half and full-face masks

Filter Classification NPF* with Half Mask NPF* with Full Face Mask
P1 4 x OEL P1 5 x OEL
P2 10 x OEL 10 x OEL
P3 50 x OEL 200*** x OEL
Class 1 Gas and Vapour 10 x OEL or 1000ppm 200*** x OEL or 1000ppm
filters (whichever is lower) (whichever is lower)
Class 2 Gas and Vapour 10 x OEL or 1000ppm 200*** x OEL or 5000ppm
filters (whichever is lower) (whichever is lower)
AX-Filter for low boiling point (organic composition with a low boiling point under 650C).
A1 and A2 Filters for organic vapour with a boiling point above 650C.
* Country APF should be used where available.
** OEL please use local exposure limit.
*** Not the NPF.
OEL = Occupational Exposure Limit
NPF = Nominal Protection Factor
ppm = parts per million

Fitting Instructions

1. Cup the respirator in your hand with the nose piece at your fingertips allowing the
headbands to hang freely below your hand.

2. Position the respirator under your chin with the nose piece up.

3. Pull the top strap over your head resting it high at the top back of your head.
Pull the bottom strap over your head and position it around the neck below the
ears.

4. Place the fingertips of both hands at the top of the metal nose piece. Mould
the nose piece to the shape of your nose by pushing inward while moving your
fingertips down both sides of the nose piece. Pinching the nose piece using one
hand may result in less effective respirator performance.

5. The seal of the respirator on the face should be fit-checked prior to wearing in the
work area. A) Cover the front of the respirator with both hands, being careful not
to disturb the position of the respirator. B) Inhale sharply. A negative pressure should
be felt inside the respirator. If any leakage is detected, adjust position of respirator
and/ or tension of strap. Retest the seal. Repeat the procedure until the respirator is
sealed properly.

Respiratory protection is only effective if it is selected correctly, fitted and worn throughout the time
when the wearer is exposed to hazards.

Urgent Notice:
1. Never have a full beard or any facial hair when using a respirator. Facial hair can limit the
effectiveness of a respirator's face-to-facepiece seal.
2. Always replace disposable respirators with every use. These respirators are not designed for
repeated use.

Information courtesy of 3M & Honeywell Safety Products

45
 DISPOSABLE FFP1 DUST MASK

DISPOSABLE FFP1 DUST MASK

Respiratory Protec�on
Code: RMPWH-0003-QS-000
Colour: White | Size: Universal

Features Specifications
• Protection form Atoxic and non-fibrogenic kinds of • Polypropylene Filter Media
dust • SANS 50149:2003
• Not suitable for working environment in which either
poisonous nor fibrogenic kinds of dust or aerosols are
to be expected
• Superior level of filtration / protection
• Minimal breathing resistance
• Easy and comfortable fitting
• Strong and durable design

DISPOSABLE FFP2 DUST MASK

DISPOSABLE FFP2 DUST MASK

Code: P2054
Colour: White | Size: Universal

Features Specifications
• Protection against solid particles and non-volatile • Polypropylene Filter Media
liquids • EN 149:2003+A1:2009
• For working environments in which deleterious and
mutagenic particles may be found
• Protects against aerosols, fog and smoke
• Superior level of filtration / protection
• Minimal breathing resistance
• Easy to use
• Fits all face types comfortably and correctly
• Meets WHO guidelines for protection against
infectious diseases such as TB
• Traditional convex shape, with nose clip and twin strap
design
3M UNVALVED DISPOSABLE FFP2 DUST MASK
MASK
3M UNVALVED DISPOSABLE FFP2 DUST

Code: P537
Colour: White | Size: Universal

Features Specifications
• The 3M™ 8000 series particulate respirators provide • Polypropylene Filter Media
effective respiratory protection for use in industries • EN 149:2001+A1:2009
where workers will be exposed to dust particles and
/ or non-volatile liquid particles
• Traditional convex shape, with nose clip and twin strap
design
• Durable, collapse resistant inner shell
• Reliable, effective protection against fine particles
• Gives effective filtration with low breathing resistance
for consistent high quality performance
• Coloured headbands for easy identification

47
 3M™ DISPOSABLE RESPIRATOR, FFP2,

3M™ DISPOSABLE RESPIRATOR, FFP2,

VALVED, 8822
Respiratory Protec�on
VALVED, 8822
Code: P2091
Colour: Black | Size: Universal

Features Specifications
• Provides lightweight, comfortable and effective • Exhalation Valve
protection against dust and mist • Nuisance Odour Relief, up to 12 x TLV
• The convex shape, twin strap design, nose foam and
nose clip ensure comfortable wear over a range of
face sizes
• 3M™ Cool Flow Valve: Effective removal of heat build
up provides a cooler and more comfortable wear,
Removes exhaled air and minimises the risk of misting
eyewear
• Reliable, effective protection against fine particles.
Colour coded straps, blue = FFP2 (APF 10)

PRE-FILTER-501 RETAINER
PRE-FILTER-501 RETAINER

Code: P485
Colour: Translucent

Features Specifications
• Approved 3M system component • Component works with 3M respirator 5000 series, 3M
• Designed to hold 3M particulate filter 5N11 cartridges 6000 series and 3M filter adaptor 603s

P3-5935 PRE-FILTERS
P3-5935 PRE-FILTERS

Code: P486/2
Colour: White | Size: Universal

Features Specifications
• 3M Industrial applications for filters Pharmaceutical, • EN143:2000 /A1:2006
powder chemicals • Suitable for use with 3M 6000 and 3M 7000 series half
• Protects against solids and liquid particles face and full face masks
• Sold in pairs

48
3M 6000 SERIES HALF MASK RESPIRATOR

Respiratory Protec�on
Code: P479 l Colour: Grey l Size: S, M, L
Features Specifications
• Comfortable to wear • Face piece weight: 82g
• Exhalation port provides increased durability, easy • EN 140
cleaning and reduced breathing resistance
• 3M Bayonet connection system
• Soft and lightweight
• Twin filter design for improved breathability
• Flexible system
• Cost effective replacement filters

ABE1-6057 CARTRIDGE
Code: P487/2 l Colour: Grey l Size: Universal
Features Specifications
• Bayonet-style for easy fitting • EN 141 ABE 1
• Twin filter design offers good balance and • Suitable for 3M 6000 AND 3M
undisturbed field of vision 7000 series half and full
• Gas and vapour cartridge 6057 protects against face masks
organic vapours
• Sold in pairs

49
 ABEK1-6059 CARTRIDGE

ABEK1-6059 CARTRIDGE
Respiratory Protec�on
Code: P488/2
Colour: Grey | Size: Universal

Features Specifications
• Bayonet-style for easy fitting • EN 141 ABEK 1
• Twin filter design offers good balance and • Suitable for 3M 6000 and 3M 7000 series half face and
undisturbed field of vision full face masks
• Gas and vapour 3M cartridge 6059 protects against
organic vapour hazards
• Sold in pairs

50
Notes

51
Workwear
52
 Introduction Body Protection

We have a wide selection of fabrics suitable for most industries. These extensively tested and
durable fabrics offer outstanding breathability to provide the wearer with ease of movement and
comfort, allowing them to complete their jobs safely and to the best of their ability. Our garments
are found in South Africa’s toughest industries and have been protecting South African workers for
more than 20 years. Browse through our fabrics and ensure that you are taking safety and that of
your employees seriously.

SANS 1387: 2009 addition 2.1-part 4 approved fabric made up of a 100% cotton
satin weave, weighing 270gsm -300gsm. Being 100% cotton, the fabric ensures
breathability and comfort. This fabric can withstand a minimum of 50 washes when
washed according to approved manufacturers recommendations. In addition, it is
treated with chemicals giving it flame retardant properties. It is important to note
that ironing this fabric after washing reignites the flame retardant properties.

Zeroflame® and Zeroflame ® Acid: A SANS 1387: 2009 addition 2.1-part 4

approved fabric made up of a 100% cotton satin weave and weighing 270gsm -
300gsm. Being 100% cotton, the fabric ensures breathability and comfort. This
fabric can withstand a minimum of 50 washes when washed according to
approved manufacturers recommendations. In addition, it is treated with
chemicals giving it flame retardant and acid resistant properties. It is important
to note that ironing this fabric after washing reignites the flame retardant
properties.

An EN approved fabric made up of 100% cotton weave and weighing 235gsm.

This is our ultra-cool flame retardant fabric which is used in sub-tropical areas.
This fabric was initially developed for European companies working in the OGP
industry, but since then it has found many other uses. It is EN ISO 11612:2015
approved.

This 100% cotton twill fabric weighs 220gsm. It ensures breathability and is J54
comfortable to wear making it an ideal workwear fabric. It is also SANS 1387:
2009 addition 2.1 part 4 certified.

A fabric made up of a 100% cotton satin weave and weighing 270gsm, the D59
cotton fabric is tough and durable and ensures 100% breathability. In addition, D59
it is also SANS 1387: 2009 addition 2.1 part 4 certified.

Viscose rayon is similar to other natural fibres, such as cotton, even though it is POLY
man-made. Made for durability and comfort, this premium acid protection VISCOSE
ACID
product is a manufactured with cellulose solution which is developed from RESISTANT

wood pulp.

Developed and approved in the USA, Vinex ® is a specialised fabric used

exclusively in the Aluminum industry due to its ability to resist molten metal VINEX
splash.

Developed by DuPont (a global powerhouse across numerous industries),

Nomex® is an inherently flame retardant fabric due to its 93% meta-aramid,
5% para-aramid and 2% carbon / nylon anti-static make-up. This means the NOMEX
very fibres it is weaved from already have flame retardant properties. This
makes its flame retardant properties (amongst others) far greater than most
fabrics, particularly flame retardant treated fabrics. Nomex® is often the
preferred fabric for F1 racing suits.

Technically complex and impressive, our 350gsm, 98% cotton, 2% carbon fibre
DALETEC
flame retardant and anti-static fabric allows an individual to work in
environments where both these risks are prevalent, all the while ensuring 100%
protection from these elements.
53
Body Protection Introduction

POLY
A fabric comprising of 65% / 35% polyester cotton and weighing 235g, this
COTTON
fabric is able to withstand a minimum of 50 washes when washed according to
ACID
approved manufacturers recommendations. It has been treated to repel water, RESISTANT
oil and acid and is an ISO 14419-1998 > grade 5 certified fabric.

Our very popular polycotton blend is available in numerous colours and sold POLY
nationwide. This fabric is durable, comfortable, lightweight and flexible. COTTON

Available in 65/35% and 80/20 % Polyester cotton.

This is a 12oz, 100% cotton denim fabric which is used in various industries and
across numerous styles. It is comfortable, durable and brings an element of DENIM
fashion to workwear.

This is a unique flame retardant, NFPA 2112 UL Certified fabric with APTV: 14 DENIM
Cal rating. It is comfortable, durable and flexible, and provides all the FLAME
protection required. RETARDANT

Workwear Features:

A pen is an essential part of many workers’ daily lives. Most of our garments are fitted
with a pen division for this exact reason, allowing workers to easily access and store
their pen as they go about their day.

A bar tack is a series of close, dense zigzag stitches used to reinforce areas of stress on
garments, such as pocket openings, bottom of a fly opening or buttonholes. This quality
feature adds extra durability to our garments.

Our triple stitched seams are fed through a folder by highly skilled and specialised
machinists. On most of our garments we use triple stitching on all stress bearing seams
to ensure our garments have an added life span.

We use YKK zips, the world’s largest zip manufacturer, on most of our garments.

An adjustable cuff is an optional feature for extra comfort which allows the cuff to be
adjusted to the individual wearer’s size.

Visibility is always a priority thus we offer reflective tape on most of our garments.

The edges of the button holes are covered with a knot to “gimp” the buttonholes which
gives garments superior strength.

We offer HACCP designed uniforms and work garments for workers in the food and
beverage industry.

We use double stitched seams on our garment pockets to ensure the garment is durable
and has an extended life span.

We have a range of garments which have added padding to keep the wearer warm in
colder environments.

54
55
 DISPOSABLE WHITE 38G APRON

DISPOSABLE WHITE 38G APRON

Workwear
Code: DPLWH-0026-FO-000
Colour: White | Size: 107cm X 70cm

Features Specifications
• Protects clothes • 10 micron Polyethylene
• Effective as part of an infection control strategy
• Liquid resistant
• Prevents transfer of liquids
• Halter neck and waist ties
• Prevents bacterial contamination by disposing of apron
when changing environments

APRON HALTER TOP-FULL

APRON HALTER TOP-FULL

Code: P2477
Colour: Red | Size: Universal

Features Specifications
• Full sized protective apron • 80/20 Polycotton 210gsm
• Tie back cords

FRANCES DRESS
FRANCES DRESS

Code: BPCFG-0024-TC-SIZE
Colour: Fern Green | Size: 28-54

Features Specifications
• Tapered panels • Polycotton
• Turn back cuffs on sleeves
• Engraved buttons
• Handy side pockets and a left breast pocket
• Designed with hospitality, service, medical and
cleaning industries in mind
• Matching head scarf available (see Head Protection)

56
 CONTI SUIT P/COTTON ROYAL BLUE

Workwear
CONTI SUIT P/COTTON ROYAL BLUE
Code: P2219/SZ
Colour: Various | Size: 72cm - 167cm

Black P2212 Navy P2216

Emerald Green P2213 Orange P2217
Grey P2214 Red P2218
Khaki P2215 White P2220

Features Specifications
• Chest pocket with double stitching and flap • 80/20 polycotton 190gsm
• Two side pockets on jacket
• 40cm concealed YKK zip
• Trousers 38mm hard pull elastic on back
• Trouser 18cm YKK zip
• Hip pockets

57
Notes

58
Accessories
59
 9 LITRE PLASTIC BUCKET
Accessories

9 LITRE PLASTIC BUCKET

Code: RETC137
Colour: Blue | Size: 9 Litre Capacity

Features Specifications
• Designed for increased strength • Material: Polypropylene
• Ergonomic handle

ECONO 36L BUCKET & WRINGER

ECONO 36L BUCKET & WRINGER

Code: CVMVC-0001-PC-036
Colour: Blue | Size: 36 Litre Capacity

Features Specifications
• Blue plastic single bucket and wringer • Material: Plastic
• 36 litre capacity
• Steel handle with pressing mechanism
• Its portable and lightweight design is ideal for use
in any environment
• To be used with a 400g Mop head

50L ECONO DOUBLE BUCKET & WRINGER

50L ECONO DOUBLE BUCKET & WRINGER

Code: CVMVC-0002-PC-050
Colour: Grey, Yellow, Blue and Red
Size: 50 Litre Capacity

Features Specifications
• 2 x Plastic buckets • Material: Steel, PP, ABS, Nylon, PVC and PE
• Plastic frame + plastic wringer
• Square shape buckets with lip
• Used in various industries
• To be used with Mop head

60
 Accessories
WET FLOOR SIGN

WET FLOOR SIGN

Code: RETC138
Colour: Yellow
Size: Expanded: 30cm x 38cm x 62cm

Features Specifications
• Includes universal wet floor symbol in red • Material: Polypropylene (PP)
• Attracts the necessary attention to create caution
• These floor stands are double sided,
offering 2 different messages
• Ideal for multiple uses and multiple applications

WINDOW SQUEEGEE WITH 400MM HANDLE

WINDOW SQUEEGEE WITH 400MM
HANDLE

Code: RETC134
Colour: Grey
Size: Weight: 340g
Dimensions: 1250cm x 250cm x 90cm

Features Specifications
• Ideal for cleaning windows • Material: Plastic

200G STANDARD WET MOP

200G STANDARD WET MOP

Code: RETC135
Colour: Grey
Size: Weight: 500g
Dimensions: 360cm x 170cm x 70cm

Features Specifications
• Wooden handle (varnished) • Material: Plastic
• These mops can be used for domestic or industrial
purposes

61
 SUPA DELUXE COLOURED WOODEN BACK BROOM
Accessories

BACK BROOM
SUPA DELUXE COLOURED WOODEN
Code: RETC108
Colour: Red
Size: Weight: 455g
Dimensions: 360cm x 80cm x 1300cm

Features Specifications
• This broom has top quality fibres, and a sturdy yet • Material: Plastic
lightweight construction which outlasts any job

DUST PAN SET

DUST PAN SET

Code: S169
Colour: Various l Size: Universal

Features Specifications
• Dust pan and Brush • Material: Plastic
• Easy cleaning and user friendly
• Clearing broken glass safely

62
Notes

63
Consumables
64
 500G MUTTON CLOTH ROLLS

Consumables
500G MUTTON CLOTH ROLLS
Code: P076
Colour: White | Size: 500g

Features Specifications
• Cloth does not scratch surfaces • 500g mutton cloth
• Reusable

MICROFIBRE CLOTHS PACK OF 5

MICROFIBRE CLOTHS PACK OF 5

Code: RETC139
Colour: Assorted
Size: Weight: 175g
Dimensions: 9cm x 6cm x 60cm

Features Specifications
• Microfibre set of 5 cloths • Material: Plastic
• Ideal for use in cleaning and dusting

PINE GUARD 5L
PINE GUARD 5L

Code: RETC117
Colour: Green | Size: 5 Litres

Features Specifications
• 3 in 1 • Liquid
• Pine Fragrance • Pine Oil
• Registered Disinfectant • Non Flammable

65
 SOLVDET 5L

SOLVDET 5L
Consumables
Code: RETC096
Colour: Orange | Size: 5 Litres

Features Specifications
• Solvent Detergent • Blend of anionic & non-ionic surfactants and organic
• Citrus fragrance solvents in a foaming base
• EEC regulations: Hazard symbol, r phrases, s phrases

AMMODET 5L
AMMODET 5L

Code: RETC010
Colour: White opaque cream l Size: 5 Litres

Features Specifications
• Ammoniated hard surface cleaner scouring cream • EC Classification: Irritant (Xi)
• Cleans without scratching • EC Risk phrases: R36/37/38
• Ammonia strengthened • EC Safety Phrases S24/25

WINDOW GLO 5L
WINDOW GLO 5L

Code: RETC110
Colour: Blue liquid | Size: 5 Litres

Features Specifications
• Glass ,Mirror & Chrome Cleaner • EC classification Irritant ( Xi)
• Removes Heavy Dirt • EC Risk phrases R 36
• Does not leave streaks • EC Safety phrases S25

66
STORE IN STORE CONCEPT

Available Stores:

Westrand Bolts & Nuts Jack’s Paint Bryanston,

9 Duncan Road, Shop 4&5 Grosvenor Crossing,
Randfontein Cnr William Nicol & Grosvenor Street
1760 Bryanston
+27 (0)82 961 1432 +27 (0)10 599 0204

Paint Shuttle HJD Printing & Mining Supplies

Riverside Industrial, Loseberg Business Park
9 Waterlilly Street, 56a Loseberg Avenue
Unit 27, Riverside Circle Fochville
Nelspruit +27 (0)83 781 3309
+27 (0)83 776 8982

Build It Knysna
Jack’s Paint Randfontein 8 New Street, Waterfront Park
232 Harred Road, Knysna
Randfontein +27 (0)44 382 1132
+27 (0)11 693 5048

STORE IN STORE CONCEPT

FOR MORE INFORMATION CONTACT: +27(0) 79 871 5325

44.
Head Office Commercial Centre Zambia Office & Warehouse
11 Bussing Street, 11 Bussing Street, Kitwe
Aureus, Randfontein, Aureus , Randfontein,
South Africa, 1760 South Africa, 1760 Heavy Industrial Area
+27 (0)11 296 3600 +27 (0)11 296 3600 Plot 5408, Kitwe, Zambia
+27 (0)11 296 3724 +26 (0)21 221 0917

Select PPE Retail Stores Select PPE Sales Region Zambia Retail Information

Randfontein Kwa-Zulu Natal Kitwe

Shop C, 92C Main Reef Road, +27 (0)82 895 4854 Plot No 5408, Natwange Road,
Randfontein Heavy Industrial Area
+27 (0)11 296 3670 Western Cape Kitwe, Copperbelt
+27 (0)82 895 4920 Zambia
Rustenburg +26 (0)21 221 0917
Shop #2 Midas Complex Free State
Cnr of 1st Avenue & +27 (0)72 137 0300 Ndola
R104 (Old Pretoria Road) Jacaranda Mall, Unit 14
Rustenburg, 0299 Northern Cape Ndola, Zambia
+27 (0)11 296 3691 +27 (0)82 327 7907 +26 (0)21 265 0356

Sishen Mpumalanga Zambia Sales

The Goodies Building, +27 (0)72 137 0300
Industrial Area, Copperbelt, North Western,
Cnr of Ian Fleming & Ystererts Street, Vaal Triangle Luapula, Muchinga Provinces
Kathu, 8446 +27 (0)82 888 9225 +26 (0)97 125 5877
+27 (0)11 296 3755
North West Lusaka Southern, Eastern,
Paarden Eiland +27 (0)82 327 7907 Western, Central
46 Shropshire Street, +26 (0)97 477 8490
Cnr of Service Road, Limpopo
Paarden Eiland, 7405 +27 (0)72 137 0300
+27 (0)21 476 0999
Eastern Cape Botswana Sales
Welkom +27 (0)82 895 4920 Gaborone
132 Constantia Street, +267 (0)730 11717
Welkom, 9459 National Sales
+27 (0)11 296 3764 +27 (0)82 327 7907

Warehouse & Direct Sales

George
Unit 33 PW Botha Blvrd
Tamsui Industria,
George Industrial,
+27 (0)11 296 3602

marketing@selectppe.co.za / www.selectppe.co.za