SM4000
Magnetic-inductive flow meter
SMR14DXXFRKG/US-100
Product characteristics
Number of inputs and outputs Number of digital outputs: 2; Number of analog outputs: 1
Measuring range 5...3000 ml/min 0.005...3 l/min
Process connection threaded connection G 1/4 DN6 flat seal
Application
System gold-plated contacts
Application Totalizer function; for industrial applications
Installation connection to pipe by means of an adapter
Media Conductive liquids; water; water-based media
conductivity: ≥ 20 µS/cm
Note on media
viscosity: < 70 mm²/s (40 °C)
Medium temperature [°C] 0...60
Pressure rating [bar] 10
Pressure rating [Mpa] 1.2
MAWP (for applications
[bar] 7.3
according to CRN)
Electrical data
Operating voltage [V] 18...30 DC; (according to EN 50178 SELV/PELV)
Current consumption [mA] < 80
Protection class III
Reverse polarity protection yes
Power-on delay time [s] 5
Inputs / outputs
Number of inputs and outputs Number of digital outputs: 2; Number of analog outputs: 1
Inputs
Inputs counter reset
ifm efector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — SM4000-00 — 03.08.2021 —
SM4000
Magnetic-inductive flow meter
SMR14DXXFRKG/US-100
Outputs
Total number of outputs 2
Output signal switching signal; analog signal; pulse signal; IO-Link; (configurable)
Electrical design PNP/NPN
Number of digital outputs 2
Output function normally open / closed; (configurable)
Max. voltage drop switching
[V] 2
output DC
Permanent current rating of
[mA] 200
switching output DC
Number of analog outputs 1
Analog current output [mA] 4...20; (scalable)
Max. load [Ω] 500
Analog voltage output [V] 0...10; (scalable)
Min. load resistance [Ω] 2000
Pulse output flow rate meter
Short-circuit protection yes
Type of short-circuit
yes (non-latching)
protection
Overload protection yes
Measuring/setting range
Measuring range 5...3000 ml/min 0.005...3 l/min
Display range [ml/min] -1999...3600
Resolution [ml/min] 1
Set point SP [ml/min] 20...3000
Reset point rP [ml/min] 5...2984
Analog start point ASP [ml/min] 0...2400
Analog end point AEP [ml/min] 600...3000
Low flow cut-off LFC [ml/min] < 60
Volumetric flow quantity monitoring
Pulse value 1...3000 ml
Pulse length [s] 0,008...2
Temperature monitoring
Measuring range [°C] -20...80
Resolution [°C] 0.2
Set point SP [°C] -19.2...80
Reset point rP [°C] -19.6...79.6
Analog start point [°C] -20...60
Analog end point [°C] 0...80
In steps of [°C] 0.2
Accuracy / deviations
Flow monitoring
Accuracy (in the measuring
± (2 % MW + 0,5 % MEW)
range)
Repeatability ± 0,2% MEW
ifm efector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — SM4000-00 — 03.08.2021 —
SM4000
Magnetic-inductive flow meter
SMR14DXXFRKG/US-100
Temperature monitoring
Accuracy [K] ± 2,5 (Q > 0,5 l/min)
Reaction times
Flow monitoring
Response time [s] 0.15; (dAP = 0, T19)
Delay time programmable dS,
[s] 0...50
dr
Damping for the switching
[s] 0...5
output dAP
Temperature monitoring
Dynamic response T05 / T09 [s] T09 = 40 (Q > 1 l/min)
Software / programming
Flow monitoring; quantity meter; Preset counter; Temperature monitoring;
Parameter setting options hysteresis / window; normally open / closed; switching logic; current/
voltage/pulse output; Start-up delay; display can be deactivated; Display unit
Interfaces
Communication interface IO-Link
Transmission type COM2 (38,4 kBaud)
IO-Link revision 1.1
SDCI standard IEC 61131-9
Profiles Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis
SIO mode yes
Required master port class A
Process data analog 3
Process data binary 2
Min. process cycle time [ms] 4
Type of operation DeviceID
Supported DeviceIDs
default 671
Operating conditions
Ambient temperature [°C] -10...60
Storage temperature [°C] -25...80
Protection IP 67
Tests / approvals
EMC DIN EN 60947-5-9
model number 007MI
accuracy class -
maximum allowable error ± 2,5 % FS
CPA approval
Q (min) 0,0003 m³/h
Q (t) -
Q (max) 0,18 m³/h
Shock resistance DIN IEC 68-2-27 20 g (11 ms)
Vibration resistance DIN IEC 68-2-6 5 g (10...2000 Hz)
Pressure equipment directive sound engineering practice; can be used for group 2 fluids; group 1 fluids on request
ifm efector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — SM4000-00 — 03.08.2021 —
SM4000
Magnetic-inductive flow meter
SMR14DXXFRKG/US-100
Mechanical data
Weight [g] 536.5
Material stainless steel (1.4404 / 316L); PBT-GF20; PC; FKM; TPE
Materials (wetted parts) stainless steel (1.4404 / 316L); PEEK; FKM
Process connection threaded connection G 1/4 DN6 flat seal
Displays / operating elements
Display unit 6 x LED, green (ml/min, l/h, l, m³, °C, 10³)
Switching status 2 x LED, yellow
Display
Measured values alphanumeric display, 4-digit
Programming alphanumeric display, 4-digit
Remarks
MW = Measured value
Remarks
MEW = Final value of the measuring range
Pack quantity 1 pcs.
Electrical connection
Connector: 1 x M12; Contacts: gold-plated
ifm efector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — SM4000-00 — 03.08.2021 —
SM4000
Magnetic-inductive flow meter
SMR14DXXFRKG/US-100
Connection
Colors to DIN EN 60947-5-2
OUT1:
- Switching output Volumetric flow quantity monitoring
- Pulse output quantity meter
- signal output Preset counter
- IO-Link
OUT2:
- Switching output Volumetric flow quantity monitoring
- Switching output Temperature monitoring
- analog output Volumetric flow quantity monitoring
- analog output Temperature monitoring
- Input counter reset
Core colors :
BK = black
BN = brown
BU = blue
WH = white
ifm efector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — SM4000-00 — 03.08.2021 —
SM4000
Magnetic-inductive flow meter
SMR14DXXFRKG/US-100
Diagrams and graphs
Pressure loss
dP Pressure loss
Q volumetric flow quantity
ifm efector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — SM4000-00 — 03.08.2021 —
