Submersible Sump Pump DS Submersible Sump Pump DS

DIMENSIONS WITH QDC DIMENSIONS WITH QDC

PUMP
Applicable Models - 50 DS (2.2 & 3.7 kW), 65 DS, 80 DS Applicable Models - 100 DS (5.5 & 7.5 kW)

Note:
Note:
1/. For detailed dimensions of the
1/. For detailed dimensions of the pumps, refer to separate dimension
pumps, refer to separate dimension data sheets.
data sheets.

2/. The discharge bend and

2/. The discharge bend and
companion fl ange supplied with the
Submersible Sump Pump
companion fl ange supplied with the
pump are used with the QDC.
pump are used with the QDC.
Type DS
3/. The weight in dimension tables
3/. The weight in dimension tables refers only to the weight of the
refers only to the weight of the QDC.
QDC.
4/. Standard accessories supplied
4/. Standard accessories supplied with QDC include:- APPLICATIONS
with QDC include:- -Connector body with
-Connector body with foundation bolts
foundation bolts -Guide pipe support • Sump pump drainage • Rain & spring water drainage
-Guide pipe support
-Sliding Glide
-Sliding Glide
-Adaptor Flange
• Irrigation • Sump dewatering
-Adaptor Flange Guide pipe is not supplied.
Guide pipe is not supplied.
FEATURES

• Air filled, Class F insulated, heavy duty motor,dissipates heat easily, operates cooler
with higher efficiencies; longer service life with lower operating costs.
• Built in motor protection autocut protects motor against overheat, out of phase,
single phasing, and no load; saves money on costly motor replacement.
• Molded cable prevents capillary action, in addition to a positive seal, it protects
against moisture entering the motor via capillary action through the cable
insulation in the event of cable damage; reduces maintenance costs to
replacing only the cable rather than the motor.
• Heavy duty ensures long dependable operation; lower maintenance costs.
• Open impellers offer the best design for handling stringy and/or
DA DE DF DG DT DN DD abrasive materials due to the large wear area and
DA DE DF DG DT DN DD
50 120 155 96 18 4 15 100 175 210 151 20 8 15 open passage-ways, providing durability and longer life.
65 140 175 116 18 4 15 • Double mechanical seals - silicon carbide lower seals,
80 150 185 126 18 8 15 carbon/ceramic upper - hard faced upper and lower
seals operate in an oil bath; providing longer service
Pump Model A P1 P2 G1 G2 F H1 H2 H3 L1 L6 BN1 BN2 BM BY1 BW DM I D1 E1 QDC life and lower maintenance costs (hot water pumps
Model Weight
100 DS 55.5 590 105 105 185 210 365 240 265 335 200 108 100 40 220 180 230 800 700 19 175 LL100 46 kg have silicon carbide uppers).
100 DS 57.5 590 105 105 185 210 365 240 265 335 200 108 100 40 220 180 230 800 700 19 175 LL100 46 kg • Small and light weight portability - easy to
QDC Units: mm unless otherwise specified transport for temporary installations.
Pump Model A P1 P2 G1 G2 F H1 H2 H3 L1 L6 BN1 BN2 D1 E1 Weight
•
Model
Available for Q.D.C connection
50 DS 52.2 415 75 80 115 135 230 135 165 215 160 32 75 80 12 120 LM50 11 kg
50 DS 53.7 415 75 80 115 135 230 135 165 215 160 32 75 80 12 120 LM50 11 kg
absorption, provides ease of
65 DS 51.5 374 75 95 120 160 250 145 190 240 120 53 75 95 12 140 LM65 14 kg maintenance for small sump type
80 DS 52.2 460 75 90 125 165 285 175 230 280 160 70 75 90 15 155 LM80 17 kg installations.
* Dimensional details are provided for reference only.
80 DS 53.7 460 75 90 125 165 285 175 230 280 160 70 75 90 15 155 LM80 17 kg * All specifications are subject to change without prior notice.
Units: mm unless otherwise specified
Authorised dealer:
EBARA Pumps Malaysia Sdn Bhd
6, Jalan TP3, UEP Subang Jaya Industrial Park,
47620 Subang Jaya, Selangor, Malaysia.
Tel : 03-8023 6622 Fax : 03-8023 9355
Email : sales@ebara.com.my
Website : www.ebara.com.my
EPM DS 0411
 Submersible Sump Pump DS Submersible Sump Pump DS Submersible Sump Pump DS

PERFORMANCE CHART DIMENSION DIMENSION WITH QDC

50
Manual type (Model DS, DSH) Applicable Models - 50 DS up to 1.5 kW
40

30 * 100DS57.5
D
* 50DSS
* 50DS, DSJA53.7
DSA * 10 Note:
, DS
J52
.2
0D
S5 Model Code
15 D 5. 1/. For detailed dimensions of the
* 50DSS * 50DDSS

*
5

65 DS
50 DS 5 .4

DS SA5
5.
pumps, refer to separate dimension

D J
T
TOTAL HEAD : m

DSJA 5.775 DS A51.5

5S J data sheets.
D

3.
10 * 50DSS 5.4 No mark: Three

7
9
8 DS A5.4S
J
Motor
2/. The companion flange supplied
7
* 40DSDAS A

*6
with the pump are used with the

DS A51
5D SJ
6 5.25 Output: kW
QDC.

D
S
5 S Hz 5:50 Hz

.5S
4 DS Model Size
Model Output Phase Pump & Motor Mass Size
Model Output Pump & Motor Mass 3/. The weight in dimension tables
A *80DSA52.2 DS : Manual type
50Hz 60Hz kW d A B F H S L kg 50Hz 60Hz kW A B F H S L kg refers only to the weight of the
3 DSJ
Size: mm DSA : Automatic type 40
40DS 5.25S 40DS 6.25S 0.25 Single PT-11/ 2 219 156 80 358 7 85 12
50
50DS 52.2 50DS 62.2 2.2 433 245 198 619 10 160 55 QDC.
40DS 5.25 40DS 6.25 0.25 Three PT-11/ 2 219 156 80 358 7 85 12 50DS 53.7 50DS 63.7 3.7 433 245 198 619 10 160 61
DSJ : Parallel 50DS 5.4S 50DS 6.4S 0.4 Single PT-2 260 186 99 433 8 110 17 65 65DS 51.5 65DS 61.5 1.5 407 210 197 510 10 120 35
2 alternate type 50DS 5.4 50DS 6.4 0.4 Three PT-2 260 186 99 396 8 110 16 80DS 52.2 80DS 62.2 2.2 503 268 215 625 10 160 59
4/. Standard accessories supplied
80 with QDC include:-
DSH : Hot water 50 50DS 5.75S 50DS 6.75S 0.75 Single PT-2 260 186 99 495 8 110 31 80DS 53.7 80DS 63.7 3.7 503 268 215 628 10 160 64
manual type 50DS 5.75 50DS 6.75 0.75 Three PT-2 260 186 99 495 8 110 17
100
100DS 55.5 100DS 65.5 5.5 615 309 257 730 13 200 92 -Connector body with
50DS 5.15 50DS 61.5 1.5 Three PT-2 266 200 115 450 10 120 25 100DS 57.5 100DS 67.5 7.5 615 309 257 730 13 200 104 foundation bolts
-Guide rail support
1
0.02 0.03 0.05 0.1 0.2 0.3 0.5 1.0 2.0 Automatic type (Model DSA) -Adaptor Flange
Guide rail is not supplied.
CAPACITY : m3 / min
Note: DSH models for hot water are limited to asterisk* marked, manual type, Three phase
pumps only.

SPECIFICATIONS

Pump
Liquid Type of liquid Sump
Handled Temperature 0°C~40°C for DS, DSA; 0°C~32°C for DSJ
Max solids size 50:5mm, 65:6mm, 80:7mm, 100:8mm
Maximum Submergence 0.4 ~1.5kW = 4m; 2.2~7.5kW = 8m Model Pump & Motor Model Pump & Motor
Output Mass Output Mass
Size Phase Size
Minimum Submergence Refer to water level (L.W.L.) in Dimensions. 50Hz 60Hz kW d A B F S L1 L2 kg 50Hz 60Hz kW A B F H S L1 L2 kg
It is possible to operate at low water level for 30min. 40
40DSA 5.25S 40DSA 6.25S 0.25 Single 1
PT-1 / 2 219 185 80 7 150 490 13
50
50DSA 52.2 50DSA 62.2 2.2 433 248 198 800 10 270 760 61
40DSA 5.25 40DSA 6.25 0.25 Three PT-11/ 2 219 185 80 7 150 490 13 50DSA 53.7 50DSA 63.7 3.7 433 248 198 800 10 270 760 67
Synchronous Speed 3000min-1 50DSA 5.4S 50DSA 6.4S 0.4 Single PT-2 260 200 99 8 150 490 18 65 65DSA 51.5 65DSA 61.5 1.5 407 210 197 530 10 150 490 36
Mechanical Double mechanical seal 50DSA 5.4 50DSA 6.4 0.4 Three PT-2 260 200 99 8 150 490 17
80
80DSA 52.2 80DSA 62.2 2.2 503 268 215 800 10 270 760 65
50 50DSA 5.75S 50DSA 6.75S 0.75 Single PT-2 260 200 99 8 150 490 31 80DSA 53.7 80DSA 63.7 3.7 503 268 215 800 10 270 760 70
Construction Impeller Semi-open 50DSA 5.75 50DSA 6.75 0.75 Three PT-2 260 200 99 8 150 490 18
Bearing Prelubricated bearing 50DSA 5.15 50DSA 61.5 1.5 Three PT-2 266 207 115 10 150 490 60

Casing Cast iron

Impeller Cast iron Automatic type (Model DSA)
Material Shaft 403 Stainless Steel
Mechanical Impeller side Silicon carbide
Seal Motor side Ceramic / Carbon
Packing NBR
Motor Pump Model A DA1 DE DF DG L1 L6 QDC Weight
Model
Type 2 pole, air-fi lled watertight
50 DS 5.4T 332 50 96 114 76 110 41 LS50 9 kg
Insulation Class F
Protection Built-in overload protector 50 DS 5.75T 332 50 96 114 76 110 41 LS50 9 kg
Accessories 50 DS 51.5 338 50 96 114 76 120 25 LS50 9 kg
Standard Cast Iron Companion flange with bolts, Submersible cable: 0.4~1.5kW x 6m, 2.2~7.5kW x 10m, Units: mm unless otherwise specified
Float switch (for DSA, DSJ)
Optional Quick discharge connector, Float switch (for DS only)
Model Output Pump & Motor Mass Model Output Pump & Motor Mass
Size Phase Size
50Hz 60Hz kW d A B F S kg 50Hz 60Hz kW A B F S K3 H 3 H4 H5 kg
1
40DSJ 5.25S 40DSJ 6.25S 0.25 Single PT-1 / 2 219 185 80 7 14 50DSJ 52.2 50DSJ 62.2 2.2 433 248 198 10 910 240 680 870 62
40 50
40DSJ 5.25 40DSJ 6.25 0.25 Three PT-11/ 2 219 185 80 7 14 50DSJ 53.7 50DSJ 63.7 3.7 433 248 198 10 910 240 680 870 67
50DSJ 5.4S 50DSJ 6.4S 0.4 Single PT-2 260 200 99 8 18 65 65DSJ 51.5 65DSJ 61.5 1.5 407 210 197 10 640 120 410 600 36
50DSJ 5.4 50DSJ 6.4 0.4 Three PT-2 260 200 99 8 17 80DSJ 52.2 80DSJ 62.2 2.2 503 268 215 10 910 240 680 870 65
80
50 50DSJ 5.75S 50DSJ 6.75S 0.75 Single PT-2 260 200 99 8 32 80DSJ 53.7 80DSJ 63.7 2.2 503 268 215 10 910 240 680 870 70
50DSJ 5.75 50DSJ 6.75 0.75 Three PT-2 260 200 99 8 18
50DSJ 5.15 50DSJ 61.5 1.5 Three PT-2 266 207 115 10 27
 Submersible Sump Pump DS Submersible Sump Pump DS Submersible Sump Pump DS

PERFORMANCE CHART DIMENSION DIMENSION WITH QDC

50
Manual type (Model DS, DSH) Applicable Models - 50 DS up to 1.5 kW
40

30 * 100DS57.5
D
* 50DSS
* 50DS, DSJA53.7
DSA * 10 Note:
, DS
J52
.2
0D
S5 Model Code
15 D 5. 1/. For detailed dimensions of the
* 50DSS * 50DDSS

*
5

65 DS
50 DS 5 .4

DS SA5
5.
pumps, refer to separate dimension

D J
T
TOTAL HEAD : m

DSJA 5.775 DS A51.5

5S J data sheets.
D

3.
10 * 50DSS 5.4 No mark: Three

7
9
8 DS A5.4S
J
Motor
2/. The companion flange supplied
7
* 40DSDAS A

*6
with the pump are used with the

DS A51
5D SJ
6 5.25 Output: kW
QDC.

D
S
5 S Hz 5:50 Hz

.5S
4 DS Model Size
Model Output Phase Pump & Motor Mass Size
Model Output Pump & Motor Mass 3/. The weight in dimension tables
A *80DSA52.2 DS : Manual type
50Hz 60Hz kW d A B F H S L kg 50Hz 60Hz kW A B F H S L kg refers only to the weight of the
3 DSJ
Size: mm DSA : Automatic type 40
40DS 5.25S 40DS 6.25S 0.25 Single PT-11/ 2 219 156 80 358 7 85 12
50
50DS 52.2 50DS 62.2 2.2 433 245 198 619 10 160 55 QDC.
40DS 5.25 40DS 6.25 0.25 Three PT-11/ 2 219 156 80 358 7 85 12 50DS 53.7 50DS 63.7 3.7 433 245 198 619 10 160 61
DSJ : Parallel 50DS 5.4S 50DS 6.4S 0.4 Single PT-2 260 186 99 433 8 110 17 65 65DS 51.5 65DS 61.5 1.5 407 210 197 510 10 120 35
2 alternate type 50DS 5.4 50DS 6.4 0.4 Three PT-2 260 186 99 396 8 110 16 80DS 52.2 80DS 62.2 2.2 503 268 215 625 10 160 59
4/. Standard accessories supplied
80 with QDC include:-
DSH : Hot water 50 50DS 5.75S 50DS 6.75S 0.75 Single PT-2 260 186 99 495 8 110 31 80DS 53.7 80DS 63.7 3.7 503 268 215 628 10 160 64
manual type 50DS 5.75 50DS 6.75 0.75 Three PT-2 260 186 99 495 8 110 17
100
100DS 55.5 100DS 65.5 5.5 615 309 257 730 13 200 92 -Connector body with
50DS 5.15 50DS 61.5 1.5 Three PT-2 266 200 115 450 10 120 25 100DS 57.5 100DS 67.5 7.5 615 309 257 730 13 200 104 foundation bolts
-Guide rail support
1
0.02 0.03 0.05 0.1 0.2 0.3 0.5 1.0 2.0 Automatic type (Model DSA) -Adaptor Flange
Guide rail is not supplied.
CAPACITY : m3 / min
Note: DSH models for hot water are limited to asterisk* marked, manual type, Three phase
pumps only.

SPECIFICATIONS

Pump
Liquid Type of liquid Sump
Handled Temperature 0°C~40°C for DS, DSA; 0°C~32°C for DSJ
Max solids size 50:5mm, 65:6mm, 80:7mm, 100:8mm
Maximum Submergence 0.4 ~1.5kW = 4m; 2.2~7.5kW = 8m Model Pump & Motor Model Pump & Motor
Output Mass Output Mass
Size Phase Size
Minimum Submergence Refer to water level (L.W.L.) in Dimensions. 50Hz 60Hz kW d A B F S L1 L2 kg 50Hz 60Hz kW A B F H S L1 L2 kg
It is possible to operate at low water level for 30min. 40
40DSA 5.25S 40DSA 6.25S 0.25 Single 1
PT-1 / 2 219 185 80 7 150 490 13
50
50DSA 52.2 50DSA 62.2 2.2 433 248 198 800 10 270 760 61
40DSA 5.25 40DSA 6.25 0.25 Three PT-11/ 2 219 185 80 7 150 490 13 50DSA 53.7 50DSA 63.7 3.7 433 248 198 800 10 270 760 67
Synchronous Speed 3000min-1 50DSA 5.4S 50DSA 6.4S 0.4 Single PT-2 260 200 99 8 150 490 18 65 65DSA 51.5 65DSA 61.5 1.5 407 210 197 530 10 150 490 36
Mechanical Double mechanical seal 50DSA 5.4 50DSA 6.4 0.4 Three PT-2 260 200 99 8 150 490 17
80
80DSA 52.2 80DSA 62.2 2.2 503 268 215 800 10 270 760 65
50 50DSA 5.75S 50DSA 6.75S 0.75 Single PT-2 260 200 99 8 150 490 31 80DSA 53.7 80DSA 63.7 3.7 503 268 215 800 10 270 760 70
Construction Impeller Semi-open 50DSA 5.75 50DSA 6.75 0.75 Three PT-2 260 200 99 8 150 490 18
Bearing Prelubricated bearing 50DSA 5.15 50DSA 61.5 1.5 Three PT-2 266 207 115 10 150 490 60

Casing Cast iron

Impeller Cast iron Automatic type (Model DSA)
Material Shaft 403 Stainless Steel
Mechanical Impeller side Silicon carbide
Seal Motor side Ceramic / Carbon
Packing NBR
Motor Pump Model A DA1 DE DF DG L1 L6 QDC Weight
Model
Type 2 pole, air-fi lled watertight
50 DS 5.4T 332 50 96 114 76 110 41 LS50 9 kg
Insulation Class F
Protection Built-in overload protector 50 DS 5.75T 332 50 96 114 76 110 41 LS50 9 kg
Accessories 50 DS 51.5 338 50 96 114 76 120 25 LS50 9 kg
Standard Cast Iron Companion flange with bolts, Submersible cable: 0.4~1.5kW x 6m, 2.2~7.5kW x 10m, Units: mm unless otherwise specified
Float switch (for DSA, DSJ)
Optional Quick discharge connector, Float switch (for DS only)
Model Output Pump & Motor Mass Model Output Pump & Motor Mass
Size Phase Size
50Hz 60Hz kW d A B F S kg 50Hz 60Hz kW A B F S K3 H 3 H4 H5 kg
1
40DSJ 5.25S 40DSJ 6.25S 0.25 Single PT-1 / 2 219 185 80 7 14 50DSJ 52.2 50DSJ 62.2 2.2 433 248 198 10 910 240 680 870 62
40 50
40DSJ 5.25 40DSJ 6.25 0.25 Three PT-11/ 2 219 185 80 7 14 50DSJ 53.7 50DSJ 63.7 3.7 433 248 198 10 910 240 680 870 67
50DSJ 5.4S 50DSJ 6.4S 0.4 Single PT-2 260 200 99 8 18 65 65DSJ 51.5 65DSJ 61.5 1.5 407 210 197 10 640 120 410 600 36
50DSJ 5.4 50DSJ 6.4 0.4 Three PT-2 260 200 99 8 17 80DSJ 52.2 80DSJ 62.2 2.2 503 268 215 10 910 240 680 870 65
80
50 50DSJ 5.75S 50DSJ 6.75S 0.75 Single PT-2 260 200 99 8 32 80DSJ 53.7 80DSJ 63.7 2.2 503 268 215 10 910 240 680 870 70
50DSJ 5.75 50DSJ 6.75 0.75 Three PT-2 260 200 99 8 18
50DSJ 5.15 50DSJ 61.5 1.5 Three PT-2 266 207 115 10 27
 Submersible Sump Pump DS Submersible Sump Pump DS Submersible Sump Pump DS

PERFORMANCE CHART DIMENSION DIMENSION WITH QDC

50
Manual type (Model DS, DSH) Applicable Models - 50 DS up to 1.5 kW
40

30 * 100DS57.5
D
* 50DSS
* 50DS, DSJA53.7
DSA * 10 Note:
, DS
J52
.2
0D
S5 Model Code
15 D 5. 1/. For detailed dimensions of the
* 50DSS * 50DDSS

*
5

65 DS
50 DS 5 .4

DS SA5
5.
pumps, refer to separate dimension

D J
T
TOTAL HEAD : m

DSJA 5.775 DS A51.5

5S J data sheets.
D

3.
10 * 50DSS 5.4 No mark: Three

7
9
8 DS A5.4S
J
Motor
2/. The companion flange supplied
7
* 40DSDAS A

*6
with the pump are used with the

DS A51
5D SJ
6 5.25 Output: kW
QDC.

D
S
5 S Hz 5:50 Hz

.5S
4 DS Model Size
Model Output Phase Pump & Motor Mass Size
Model Output Pump & Motor Mass 3/. The weight in dimension tables
A *80DSA52.2 DS : Manual type
50Hz 60Hz kW d A B F H S L kg 50Hz 60Hz kW A B F H S L kg refers only to the weight of the
3 DSJ
Size: mm DSA : Automatic type 40
40DS 5.25S 40DS 6.25S 0.25 Single PT-11/ 2 219 156 80 358 7 85 12
50
50DS 52.2 50DS 62.2 2.2 433 245 198 619 10 160 55 QDC.
40DS 5.25 40DS 6.25 0.25 Three PT-11/ 2 219 156 80 358 7 85 12 50DS 53.7 50DS 63.7 3.7 433 245 198 619 10 160 61
DSJ : Parallel 50DS 5.4S 50DS 6.4S 0.4 Single PT-2 260 186 99 433 8 110 17 65 65DS 51.5 65DS 61.5 1.5 407 210 197 510 10 120 35
2 alternate type 50DS 5.4 50DS 6.4 0.4 Three PT-2 260 186 99 396 8 110 16 80DS 52.2 80DS 62.2 2.2 503 268 215 625 10 160 59
4/. Standard accessories supplied
80 with QDC include:-
DSH : Hot water 50 50DS 5.75S 50DS 6.75S 0.75 Single PT-2 260 186 99 495 8 110 31 80DS 53.7 80DS 63.7 3.7 503 268 215 628 10 160 64
manual type 50DS 5.75 50DS 6.75 0.75 Three PT-2 260 186 99 495 8 110 17
100
100DS 55.5 100DS 65.5 5.5 615 309 257 730 13 200 92 -Connector body with
50DS 5.15 50DS 61.5 1.5 Three PT-2 266 200 115 450 10 120 25 100DS 57.5 100DS 67.5 7.5 615 309 257 730 13 200 104 foundation bolts
-Guide rail support
1
0.02 0.03 0.05 0.1 0.2 0.3 0.5 1.0 2.0 Automatic type (Model DSA) -Adaptor Flange
Guide rail is not supplied.
CAPACITY : m3 / min
Note: DSH models for hot water are limited to asterisk* marked, manual type, Three phase
pumps only.

SPECIFICATIONS

Pump
Liquid Type of liquid Sump
Handled Temperature 0°C~40°C for DS, DSA; 0°C~32°C for DSJ
Max solids size 50:5mm, 65:6mm, 80:7mm, 100:8mm
Maximum Submergence 0.4 ~1.5kW = 4m; 2.2~7.5kW = 8m Model Pump & Motor Model Pump & Motor
Output Mass Output Mass
Size Phase Size
Minimum Submergence Refer to water level (L.W.L.) in Dimensions. 50Hz 60Hz kW d A B F S L1 L2 kg 50Hz 60Hz kW A B F H S L1 L2 kg
It is possible to operate at low water level for 30min. 40
40DSA 5.25S 40DSA 6.25S 0.25 Single 1
PT-1 / 2 219 185 80 7 150 490 13
50
50DSA 52.2 50DSA 62.2 2.2 433 248 198 800 10 270 760 61
40DSA 5.25 40DSA 6.25 0.25 Three PT-11/ 2 219 185 80 7 150 490 13 50DSA 53.7 50DSA 63.7 3.7 433 248 198 800 10 270 760 67
Synchronous Speed 3000min-1 50DSA 5.4S 50DSA 6.4S 0.4 Single PT-2 260 200 99 8 150 490 18 65 65DSA 51.5 65DSA 61.5 1.5 407 210 197 530 10 150 490 36
Mechanical Double mechanical seal 50DSA 5.4 50DSA 6.4 0.4 Three PT-2 260 200 99 8 150 490 17
80
80DSA 52.2 80DSA 62.2 2.2 503 268 215 800 10 270 760 65
50 50DSA 5.75S 50DSA 6.75S 0.75 Single PT-2 260 200 99 8 150 490 31 80DSA 53.7 80DSA 63.7 3.7 503 268 215 800 10 270 760 70
Construction Impeller Semi-open 50DSA 5.75 50DSA 6.75 0.75 Three PT-2 260 200 99 8 150 490 18
Bearing Prelubricated bearing 50DSA 5.15 50DSA 61.5 1.5 Three PT-2 266 207 115 10 150 490 60

Casing Cast iron

Impeller Cast iron Automatic type (Model DSA)
Material Shaft 403 Stainless Steel
Mechanical Impeller side Silicon carbide
Seal Motor side Ceramic / Carbon
Packing NBR
Motor Pump Model A DA1 DE DF DG L1 L6 QDC Weight
Model
Type 2 pole, air-fi lled watertight
50 DS 5.4T 332 50 96 114 76 110 41 LS50 9 kg
Insulation Class F
Protection Built-in overload protector 50 DS 5.75T 332 50 96 114 76 110 41 LS50 9 kg
Accessories 50 DS 51.5 338 50 96 114 76 120 25 LS50 9 kg
Standard Cast Iron Companion flange with bolts, Submersible cable: 0.4~1.5kW x 6m, 2.2~7.5kW x 10m, Units: mm unless otherwise specified
Float switch (for DSA, DSJ)
Optional Quick discharge connector, Float switch (for DS only)
Model Output Pump & Motor Mass Model Output Pump & Motor Mass
Size Phase Size
50Hz 60Hz kW d A B F S kg 50Hz 60Hz kW A B F S K3 H 3 H4 H5 kg
1
40DSJ 5.25S 40DSJ 6.25S 0.25 Single PT-1 / 2 219 185 80 7 14 50DSJ 52.2 50DSJ 62.2 2.2 433 248 198 10 910 240 680 870 62
40 50
40DSJ 5.25 40DSJ 6.25 0.25 Three PT-11/ 2 219 185 80 7 14 50DSJ 53.7 50DSJ 63.7 3.7 433 248 198 10 910 240 680 870 67
50DSJ 5.4S 50DSJ 6.4S 0.4 Single PT-2 260 200 99 8 18 65 65DSJ 51.5 65DSJ 61.5 1.5 407 210 197 10 640 120 410 600 36
50DSJ 5.4 50DSJ 6.4 0.4 Three PT-2 260 200 99 8 17 80DSJ 52.2 80DSJ 62.2 2.2 503 268 215 10 910 240 680 870 65
80
50 50DSJ 5.75S 50DSJ 6.75S 0.75 Single PT-2 260 200 99 8 32 80DSJ 53.7 80DSJ 63.7 2.2 503 268 215 10 910 240 680 870 70
50DSJ 5.75 50DSJ 6.75 0.75 Three PT-2 260 200 99 8 18
50DSJ 5.15 50DSJ 61.5 1.5 Three PT-2 266 207 115 10 27
Submersible Sump Pump DS Submersible Sump Pump DS

DIMENSION WITH QDC DIMENSIONS WITH QDC

PUMP
Applicable Models - 50 DS (2.2 & 3.7 kW), 65 DS, 80 DS Applicable Models - 100 DS (5.5 & 7.5 kW)

Note:
Note:
1/. For detailed dimensions of the
1/. For detailed dimensions of the pumps, refer to separate dimension
pumps, refer to separate dimension data sheets.

Submersible Sump Pump

data sheets.
2/. The discharge bend and
2/. The discharge bend and companion fl ange supplied with the
companion fl ange supplied with the
pump are used with the QDC.
pump are used with the QDC.
Type DS
3/. The weight in dimension tables
3/. The weight in dimension tables refers only to the weight of the
refers only to the weight of the QDC.
QDC.
4/. Standard accessories supplied
4/. Standard accessories supplied with QDC include:- APPLICATIONS
with QDC include:- -Connector body with
-Connector body with foundation bolts
foundation bolts -Guide pipe support • Sump pump drainage • Rain & spring water drainage
-Guide pipe support
-Sliding Glide
-Sliding Glide
-Adaptor Flange
• Irrigation • Sump dewatering
-Adaptor Flange Guide pipe is not supplied.
Guide pipe is not supplied.
FEATURES

• Air filled, Class F insulated, heavy duty motor,dissipates heat easily, operates cooler
with higher efficiencies; longer service life with lower operating costs.
• Built in motor protection autocut protects motor against overheat, out of phase,
single phasing, and no load; saves money on costly motor replacement.
• Molded cable prevents capillary action, in addition to a positive seal,
it protects against moisture entering the motor via capillary action
through the cable insulation in the event of cable damage;
reduces maintenance costs to replacing only the
cable rather than the motor.
• Heavy duty ensures long dependable operation;
lower maintenance costs.
DA DE DF DG DT DN DD DA DE DF DG DT DN DD • Open impellers offer the best design for handling
50 120 155 96 18 4 15 100 175 210 151 20 8 15 stringy and/or abrasive materials due to the large
65 140 175 116 18 4 15 wear area and open passage-ways, providing
80 150 185 126 18 8 15 durability and longer life.
• Double mechanical seals - silicon carbide lower seals,
Pump Model A P1 P2 G1 G2 F H1 H2 H3 L1 L6 BN1 BN2 BM BY1 BW DM I D1 E1 QDC carbon/ceramic upper - hard faced upper and lower
Model Weight
seals operate in an oil bath; providing longer service
100 DS 55.5 590 105 105 185 210 365 240 265 335 200 108 100 40 220 180 230 800 700 19 175 LL100 46 kg
life and lower maintenance costs (hot water pumps
100 DS 57.5 590 105 105 185 210 365 240 265 335 200 108 100 40 220 180 230 800 700 19 175 LL100 46 kg
Units: mm unless otherwise specified
have silicon carbide uppers).
QDC
Pump Model A P1 P2 G1 G2 F H1 H2 H3 L1 L6 BN1 BN2 D1 E1 Model Weight
• Small and light weight portability - easy to
50 DS 52.2 415 75 80 115 135 230 135 165 215 160 32 75 80 12 120 LM50 11 kg transport for temporary installations.
50 DS 53.7 415 75 80 115 135 230 135 165 215 160 32 75 80 12 120 LM50 11 kg
• Available for Q.D.C connection
65 DS 51.5 374 75 95 120 160 250 145 190 240 120 53 75 95 12 140 LM65 14 kg absorption, provides ease of
80 DS 52.2 460 75 90 125 165 285 175 230 280 160 70 75 90 15 155 LM80 17 kg maintenance for small sump type
* Dimensional details are provided for reference only.
80 DS 53.7 460 75 90 125 165 285 175 230 280 160 70 75 90 15 155 LM80 17 kg * All specifications are subject to change without prior notice. installations.
Units: mm unless otherwise specified

Authorised dealer:
EBARA Pumps Malaysia Sdn Bhd
6, Jalan TP3, UEP Subang Jaya Industrial Park,
47620 Subang Jaya, Selangor, Malaysia.
Tel : 03-8023 6622 Fax : 03-8023 9355
Email : sales@ebara.com.my
Website : www.ebara.com.my
EPM DS 0411
Submersible Sump Pump DS Submersible Sump Pump DS

DIMENSIONS WITH QDC DIMENSION WITH QDC

PUMP
Applicable Models - 50 DS (2.2 & 3.7 kW), 65 DS, 80 DS Applicable Models - 100 DS (5.5 & 7.5 kW)

Note:
Note:
1/. For detailed dimensions of the
1/. For detailed dimensions of the pumps, refer to separate dimension
pumps, refer to separate dimension data sheets.

Submersible Sump Pump

data sheets.
2/. The discharge bend and
2/. The discharge bend and companion fl ange supplied with the
companion fl ange supplied with the
pump are used with the QDC.
pump are used with the QDC.
Type DS
3/. The weight in dimension tables
3/. The weight in dimension tables refers only to the weight of the
refers only to the weight of the QDC.
QDC.
4/. Standard accessories supplied
4/. Standard accessories supplied with QDC include:- APPLICATIONS
with QDC include:- -Connector body with
-Connector body with foundation bolts
foundation bolts -Guide pipe support • Sump pump drainage • Rain & spring water drainage
-Guide pipe support
-Sliding Glide
-Sliding Glide
-Adaptor Flange
• Irrigation • Sump dewatering
-Adaptor Flange Guide pipe is not supplied.
Guide pipe is not supplied.
FEATURES

• Air filled, Class F insulated, heavy duty motor,dissipates heat easily, operates cooler
with higher efficiencies; longer service life with lower operating costs.
• Built in motor protection autocut protects motor against overheat, out of phase,
single phasing, and no load; saves money on costly motor replacement.
• Molded cable prevents capillary action, in addition to a positive seal,
it protects against moisture entering the motor via capillary action
through the cable insulation in the event of cable damage;
reduces maintenance costs to replacing only the
cable rather than the motor.
• Heavy duty ensures long dependable operation;
lower maintenance costs.
DA DE DF DG DT DN DD DA DE DF DG DT DN DD • Open impellers offer the best design for handling
50 120 155 96 18 4 15 100 175 210 151 20 8 15 stringy and/or abrasive materials due to the large
65 140 175 116 18 4 15 wear area and open passage-ways, providing
80 150 185 126 18 8 15 durability and longer life.
• Double mechanical seals - silicon carbide lower seals,
Pump Model A P1 P2 G1 G2 F H1 H2 H3 L1 L6 BN1 BN2 BM BY1 BW DM I D1 E1 QDC carbon/ceramic upper - hard faced upper and lower
Model Weight
seals operate in an oil bath; providing longer service
100 DS 55.5 590 105 105 185 210 365 240 265 335 200 108 100 40 220 180 230 800 700 19 175 LL100 46 kg
life and lower maintenance costs (hot water pumps
100 DS 57.5 590 105 105 185 210 365 240 265 335 200 108 100 40 220 180 230 800 700 19 175 LL100 46 kg
Units: mm unless otherwise specified
have silicon carbide uppers).
QDC
Pump Model A P1 P2 G1 G2 F H1 H2 H3 L1 L6 BN1 BN2 D1 E1 Model Weight
• Small and light weight portability - easy to
50 DS 52.2 415 75 80 115 135 230 135 165 215 160 32 75 80 12 120 LM50 11 kg transport for temporary installations.
50 DS 53.7 415 75 80 115 135 230 135 165 215 160 32 75 80 12 120 LM50 11 kg
• Available for Q.D.C connection
65 DS 51.5 374 75 95 120 160 250 145 190 240 120 53 75 95 12 140 LM65 14 kg absorption, provides ease of
80 DS 52.2 460 75 90 125 165 285 175 230 280 160 70 75 90 15 155 LM80 17 kg maintenance for small sump type
* Dimensional details are provided for reference only.
80 DS 53.7 460 75 90 125 165 285 175 230 280 160 70 75 90 15 155 LM80 17 kg * All specifications are subject to change without prior notice. installations.
Units: mm unless otherwise specified

Authorised dealer:
EBARA Pumps Malaysia Sdn Bhd
6, Jalan TP3, UEP Subang Jaya Industrial Park,
47620 Subang Jaya, Selangor, Malaysia.
Tel : 03-8023 6622 Fax : 03-8023 9355
Email : sales@ebara.com.my
Website : www.ebara.com.my
EPM DS 0114