Tapis B-20
WELLBORE SKETCH
SHORT STRING McEvoy Hanger LONG STRING
3-1/2", 9.2 lb/ft, N-80, HYD A-95 WI WI 3-1/2", 9.2 lb/ft, N-80, HYD A-95
'B' SVLN (DKS i/v) 157.3m 'B' SVLN (DKS i/v)
'F' Nipple (2.81") 917.8m 'F' Nipple (2.81")
May 2016: Tubing joint leak at 1448m
May 2016: Potential csg leak at 1608m
Mar 2015: Tubing leak at 1665m
GLM #1 (1" DV) 2401.8m
GLM #1 (1" DV)
'F' Nipple (2.81")
'A-5' Packer
'R' Nipple (2.75" PB, 2.69" NG) w RZG Plug 2428.0m
(May 2016: Plug leaking)
J-20: 2456.4 - 2463.1m Blast Joints
'A' Polished Nipple (Leak)
'DB' Packer
'R' Nipple (2.75" PB, 2.69" NG)
J-25: 2494.5 - 2503.6m
J-30: 2537.5 - 2551.2m
2555.4 - 2561.2m
2563.4 - 2566.7m
2581.7m
Max Angle = 46.5° 9-5/8", 40.0 lb/ft, K-55 @ 1826.4 mMD
9-5/8", 40.0 lb/ft, N-80 @ 2596.9 mMD
LONG STRING
-1/2", 9.2 lb/ft, N-80, HYD A-95
± 6° 165.8m
± 36° 927.2m
max 0.25 bbl/min
min 300 psi
TaB-20U Depths
± 47° 2411.9m Ft Metres Reference
GLM#1 7874 2400.0 Tally
± 47° 2421.9m Tubing 7880 2401.8 Tally
Joint 7912 2411.6 Tally
± 47° 2423.5m Top of stuck toolstring 7937 2419.1 WL Depth
Tubing 7944 2421.3 Tally
hed Nipple (Leak) 2465.8m
2478.0m
le (2.75" PB, 2.69" NG) ± 46° 2482.3m
40.0 lb/ft, K-55 @ 1826.4 mMD
40.0 lb/ft, N-80 @ 2596.9 mMD
max 0.25 bbl/min
EMEPMI WELL-BY-WELL REVIEW PROFORMA
WELL TaB-20U
A. Current Utility
Sand Interval mMDrkb Perf Interval mMDrkb Perf Interval mTVDss
Date
Sand Completed Top Bottom Top Bottom Top Bottom
1 J-20 May-80 2431 2475.8 2456.4 2463.1
Rate GOR Contacts
Tubing (stb/d) Water Cut (%) (scf/stb) GOC OWC Cum (MBO)
B. Workover History
Date Workover Unit Description
Jul-81 CWR Re-completed as a dual WI with J-20 in the SS and J-25/30 in the LS.
RIH and pulled Ball Valve at 157m RKB. RIH with Sinker Bar to 2426m RKB.
Aug-82 WLU Conduct SBHP survey. RIH set Ball Valve at 157m RKB.
RIH and pulled Ball Valve at 157m RKB. RIH 2.5" GR and tagged R Nipple at
Jul-83 WLU 2427m RKB. Rig up E-line and run GR/CCL/pressure to 1036m RKB. Reset Ball
Valve.
RIH EMR gauge and conduct injectivity Fall-Off test.
Jul-83 WLU
RIH 3" GS pulling tool + probe + prong and retrieved 2.81" DKS at 157m RKB.RIH
Jul-90 WLU 2.7" GR and tagged R nipple at 2434m RKB. Conduct caliper survey. Reset 2.81"
DKS at 157m RKB.
Jun-93 Prod Reported high PCP.
Diagnose high PCP. 2.75" RB-2 tagged R-nipple @ 2488m. PCP comm with SS. Top
Apr-94 WSU packer leak. While SS is injecting (500-3000 psi in 1.5 hrs), PCP increased from (0-
400 psi). While SS is SI (1700-300 psi in 10 mins), PCP responded from 400-290
psi. LS stayed at 0 psi during the test.
RIH 3" GS + M Probe and E prong to 153m RKB. Latched and retrieved DKS. RIH
Jul-97 WLU 3/16 wire scratcher from 137 to 1158m RKB. Changed V packing and reset 2.81"
DKS (Baker sur set lock).
Failed to unscrew the top X- mas crown cap due to internal thread badly coroded.
soak with WD 40 for day crew to continue. GR tagged top of IV @157m.
Mar-15 WLU Recovered DKS IV. GR tagged R No Go Nipple @2427.7. Completed MIT caliper
survey and reset DKS IV. MIT survey indicates 1 leak at 1665m; max penetration
28%; wall loss <10%
Retrieve 2.81"DKS Insert valve at TRSV @ 147.3 m WLRKB. Tubing clearance
check with 2.80"Gauge Ring tag R-Nogo Nipple @ 2426.7 m WLRKB and set
May-16 WLU 2.75"RZG Plug at R-Nogo Nipple. Completed ALFA survey as per program. Reset
DKS IV. Cycled C/Line. C/Line holding good. Good negative test on IV
ALFA survey indicate leak in SS at 1448m, 1665m and csg leak at 1608m. LS leak
identified in A polished nipple at 2465.8m
Jun-17 CDFT - WV not done - blinded, CV and SSV fail WIMS. LMV and ScSSV pass
Hit Team
WIMS
Jul-17 Hit Team / Wellhead Performed cavity leak test to 3,000psi - holding good
Specialist
Aug-17 Re-tested SSV & LMV post greasing for flowline tie-in - all valves tested pass
Hit Team
WIMS
C. Performance Trend Observations
- Decline trends (comments on base performance, uncertainties and step changes)
- Prolonged shut-in behaviour (Evidence of recharge?)
- Interactions with nearby wells
- Other comments
Note: Offset wells in B-10U & 9U high w/cut in J-20
D. Wellbore Utility Plan
Plan/Description Justification Priority (H/M/L) & Timing
Maintain for B-18 J-20 reservoir. If B-18
watered out in J-20 res - WI not
Current WI -SI for Reservoir management required.
Opportunity 1
Opportunity 2
Infill potential
E. Follow-up Actions:
Action Responsibility
1 Check for SS/LC communication SHSM
2
3
Comment
Cum (MBO)
-25/30 in the LS.
Sinker Bar to 2426m RKB.
RKB.
GR and tagged R Nipple at
re to 1036m RKB. Reset Ball
.
d 2.81" DKS at 157m RKB.RIH
uct caliper survey. Reset 2.81"
488m. PCP comm with SS. Top
.5 hrs), PCP increased from (0-
CP responded from 400-290
atched and retrieved DKS. RIH
ged V packing and reset 2.81"
internal thread badly coroded.
ed top of IV @157m.
2427.7. Completed MIT caliper
ak at 1665m; max penetration
m WLRKB. Tubing clearance
2426.7 m WLRKB and set
survey as per program. Reset
negative test on IV
and csg leak at 1608m. LS leak
MS. LMV and ScSSV pass
od
-in - all valves tested pass
Priority (H/M/L) & Timing
Timing
Oct 2004
EMEPMI WELL-BY-WELL REVIEW PROFORMA
WELL TaB-20L
A. Current Utility
Sand Interval mMDrkb Perf Interval mMDrkb Perf Interval mTVDss
Date
Sand Completed Top Bottom Top Bottom Top Bottom
1 J-25 May-80 2486 2529.1 2494.5 2503.6
2 J-30 Sep-81 2536.3 2569 2537.5 2551.2
Sep-81 2555.4 2561.2
3 Sep-81 2563.4 2566.7
Rate GOR Contacts
Tubing (stb/d) Water Cut (%) (scf/stb) GOC OWC Cum (MBO)
B. Workover History
Date Workover Unit Description
Jul-81 CWR Re-completed as a dual WI with J-20 in the SS and J-25/30 in the LS.
Jul-83 WLU Performed injection Fall-Off test
Apr-84 WLU Performed PLT survey
Jul-88 WLU Retrieved Ball Valve at 167m RKB. RIH with 2.42" GR at tagged TD at 2565m
RKB. Performed PLT survey. Reset Ball Valve at 167m RKB.
Baker Sur-set lock c/out. Retrieved DKS Ball Valve. Reciprocate 2.81" wire
Jul-97 WLU scratcher at 162m RKB. Servive and clean DKS ball valve. Replace M-Lock with
Sur Set Lock and tested OK.Unable to RIH 2.81" DKS - hung up at tbg hanger.
Tappered down several times and able to pass thru. Set at 162m RKB.
G/ring tagged top of DKS IV @ 165.8 mWLRKB. Attempt to remove the G/ring
from lubricator but unable to bleed down press to zero. Inject sealant on LMV and
Mar-15 WLU CV. LMV holding good but CV slightly blowing. Manage to remove the G/ring.
Completed MIT survey. Obtain good data. Completed set back DKS IV at B SVLN
and tested good. Max penetration at 26; wall loss <10%
Retrieve 2.81"DKS Insert valve at TRSV @ 166.1 m WLRKB. RIH 2.80"Gauge
Ring h/up at 2nd F-Nipple @ 2420.2 m WLRKB. RIH 2.72"Gauge Ring and tag R-
No go nipple @ 2483.3 m WLRKB. Complete 3 passes of ALFA. Reset DKS IV at
May-16 WLU TRSV @ 166.1m
ALFA survey indicate leak in SS at 1448m, 1665m and csg leak at 1608m. LS leak
identified in A polished nipple at 2465.8m
Jun-17 CDFT - WV not done - blinded, CV and SSV fail WIMS. LMV and ScSSV pass
Hit Team
WIMS
Jul-17 Hit Team / Wellhead Performed cavity leak test to 3,000psi - holding good
Specialist
Aug-17 Re-tested SSV & LMV post greasing for flowline tie-in - all valves tested pass
Hit Team
WIMS
C. Performance Trend Observations
- Decline trends (comments on base performance, uncertainties and step changes)
- Prolonged shut-in behaviour (Evidence of recharge?)
- Interactions with nearby wells
- Other comments
Note: Offset wells in B-18, B-16, B-10l, B-11U< B-9L high w/cut in J-25/30
WI required if add perf in J-25 of B-9L
D. Wellbore Utility Plan
Plan/Description Justification Priority (H/M/L) & Timing
Current WI -SI for Reservoir management WI not required in J-25/30. Low priority to add perf in J-25
Opportunity 1
Opportunity 2
Infill potential
E. Follow-up Actions:
Action Responsibility
1
2
3
Comment
Cum (MBO)
-25/30 in the LS.
GR at tagged TD at 2565m
67m RKB.
Reciprocate 2.81" wire
l valve. Replace M-Lock with
KS - hung up at tbg hanger.
. Set at 162m RKB.
tempt to remove the G/ring
ero. Inject sealant on LMV and
nage to remove the G/ring.
ed set back DKS IV at B SVLN
10%
m WLRKB. RIH 2.80"Gauge
H 2.72"Gauge Ring and tag R-
ses of ALFA. Reset DKS IV at
and csg leak at 1608m. LS leak
MS. LMV and ScSSV pass
od
-in - all valves tested pass
Priority (H/M/L) & Timing
ow priority to add perf in J-25
Timing
