Part Stocking Recommendation
The table below is a minimum spare parts inventory recommendation designated by letter code in each Service Parts
List. Each letter code indicates a percentage for determining stock quantities to support the field population. Any quantity
less than 1 or partial quantities need not be stocked.
Letter Code Percentage Example
A 15% Part quantity = 10 per unit
Field Population = 240 units
Recommended stock = 240 units x 10 per unit x .15 = 360 parts
B 10% Part quantity = 4 per unit
Field Population = 66 units
Recommended stock = 66 units x 4 per unit x .10 = 26.4 or 26 parts
C 6% Part quantity = 2 per unit
Field Population = 203 units
Recommended stock = 203 units x 2 per unit x .06 = 24.4 or 24 parts
D 4% Part quantity = AR*
Field Population = 42 units
Recommended stock = 42 units x 3 per unit x.04 = 5.04 or 5 parts
E 2% Part quantity = 1 per unit
Field Population = 75 units
Recommended stock = 75 units x 1 per unit x .02 = 1.5 or 1 part
*Part quantities denoted by "AR" (as required) should be ordered by a quantity of 3 per unit.
Copyright 2014 Dana Holding Corporation For product inquiries or support,
All content is subject to copyright by Dana and may not visit www.dana.com or call 419-887-6445
be reproduced in whole or in part by any means, For other service publications,
electronic or otherwise, without prior written approval. visit www.SpicerParts.com/literature.asp
THIS INFORMATION IS NOT INTENDED FOR SALE OR For online service parts ordering,
RESALE, AND THIS NOTICE MUST REMAIN ON ALL visit www.SpicerParts.com/order.asp
COPIES.
