Scribd
Upload
250 views2 pages

Sandvik CH 660-32-33

The document illustrates different crushing chamber alternatives for an SPC Sandvik CH660 crusher. It shows the type number format and provides a table that lists various component options - including concave, mantle, filler ring, and casting options - that correspond to different chamber configurations for varying degrees of coarseness or fineness. The table specifies part numbers and weights for each component.

Uploaded by

Damaris Ortiz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
250 views2 pages

Sandvik CH 660-32-33

The document illustrates different crushing chamber alternatives for an SPC Sandvik CH660 crusher. It shows the type number format and provides a table that lists various component options - including concave, mantle, filler ring, and casting options - that correspond to different chamber configurations for varying degrees of coarseness or fineness. The table specifies part numbers and weights for each component.

Uploaded by

Damaris Ortiz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SPC Sandvik CH660:02 452.

4130

The table below illustrates different crushing chambers alternatives


Example of the type no shown on crusher’s identification plate

CH660-M/B/M-36/40/44/32:1

6005-0 6005-9 4175-0 4175-9 6006-0 6007-9


Concave Casting Mantle Cast- Filler ring Casting
comp. ing comp.
comp.

EC extra coarse 5x10 kg A 9x10 kg


442.8813-01 (M1) 442.8819-01 (M1)
EC/A 442.8813-02 (M2) 442.8819-02 (M2)
442.8813-03 (M7) 442.8819-03 (M7)

EC extra coarse 5x10 kg B 5x10 kg


442.8813-01 (M1) 442.8820-01 (M1)
EC/B 442.8813-02 (M2) 442.8820-02 (M2)
442.8813-03 (M7) 442.8820-03 (M7)

* Se footnote 12x10 kg D 9x10 kg


442.9230-01 (M1) 442.8821-01 (M1)
CX/D 442.9230-02 (M2) 442.8821-02 (M2)
442.9230-03 (M7) 442.8821-03 (M7)

C course 20x10 kg A 442.8819-01 (M1) 9x10 kg


442.8814-01 (M1) 442.8819-02 (M2)
C/A 442.8814-02 (M2) 442.8819-03 (M7)
442.8814-03 (M7)

C course 20x10 kg B 5x10 kg


442.8814-01 (M1) 442.8820-01 (M1)
C/B 442.8814-02 (M2) 442.8820-02 (M2)
442.8814-03 (M7) 442.8820-03 (M7)

MC medium course 13x10 kg A 9x10 kg MC medium course 13x10 kg


442.8815-01 (M1) 442.8819-01 (M1) 442.8823-01
MC/A/MC 442.8815-02 (M2) 442.8819-02 (M2)
442.8815-03 (M7) 442.8819-03 (M7)

MC medium course 13x10 kg B 5x10 kg MC medium course 13x10 kg


442.8815-01 (M1) 442.8820-01 (M1) 442.8823-01
MC/B/MC 442.8815-02 (M2) 442.8820-02 (M2)
442.8815-03 (M7) 442.8820-03 (M7)

MC medium course 13x10 kg HC 7x10 kg MC medium course 13x10 kg


442.8815-01 (M1) 442.9760-01 (M1) 442.8823-01
MC/HC/MC 442.8815-02 (M2) 442.9760-02 (M2)
442.8815-03 (M7)

M medium 14x10 kg A 9x10 kg MC medium course 13x10 kg


442.8816-01 (M1) 442.8819-01 (M1) 442.8823-01
M/A/MC 442.8816-02 (M2) 442.8819-02 (M2)
442.8819-03 (M7)

M medium 14x10 kg B 5x10 kg MC medium course 13x10 kg


442.8816-01 (M1) 442.8820-01 (M1) 442.8823-01
M/B/MC 442.8816-02 (M2) 442.8820-02 (M2)
442.8820-03 (M7)

M medium 14x10 kg HC 7x10 kg MC medium course 13x10 kg


M/HC/MC 442.8816-01 (M1) 442.9760-01 (M1) 442.8823-01
442.8816-02 (M2) 442.9760-02 (M2)

30 Doc. no. R 223.1364 en Ver. 02 © 2010 Sandvik SRP AB


SPC Sandvik CH660:02 452.4130

The table below illustrates different crushing chambers alternatives


Example of the type no shown on crusher’s identification plate

CH660-M/B/M-36/40/44/32:1

6005-0 6005-9 4175-0 4175-9 6006-0 6007-9


Concave Casting Mantle Cast- Filler ring Casting
comp. ing comp.
comp.

MF medium fine 9x10 kg A 9x10 kg MF medium fine 13x10 kg


442.8817-01 (M1) 442.8819-01 (M1) 442.8863-01
MF/A/MF 442.8817-02 (M2) 442.8819-02 (M2)
442.8817-03 (M7) 442.8819-03 (M7)

MF medium fine 9x10 kg B 5x10 kg MF medium fine 13x10 kg


442.8817-01 (M1) 442.8820-01 (M1) 442.8863-01
MF/B/MF 442.8817-02 (M2) 442.8820-02 (M2)
442.8817-03 (M7) 442.8820-03 (M7)

MF medium fine 9x10 kg HC 7x10 kg MF medium fine 13x10 kg


442.8817-01 (M1) 442.9760-01 (M1) 442.8863-01
MF/HC/MF 442.8817-02 (M2) 442.9760-02 (M2)
442.8817-03 (M7)

F fine 13x10 kg A 9x10 kg MF medium fine 13x10 kg


442.8818-01 (M1) 442.8819-01 (M1) 442.8863-01
F/A/MF 442.8818-02 (M2) 442.8819-02 (M2)
442.8818-03 (M7) 442.8819-03 (M7)

F fine 13x10 kg B 5x10 kg MF medium fine 13x10 kg


442.8818-01 (M1) 442.8820-01 (M1) 442.8863-01
F/B/MF 442.8818-02 (M2) 442.8820-02 (M2)
442.8818-03 (M7) 442.8820-03 (M7)

F fine 13x10 kg HC 7x10 kg MF medium fine 13x10 kg


442.8818-01 (M1) 442.9760-01 (M1) 442.8863-01
F/HC/MF 442.8818-02 (M2) 442.9760-02 (M2)
442.8818-03 (M7)

EF extra fine 13x10 kg EF extra fine 7x10 kg


EF/EF 452.0832-01 (M1) 452.0820-001 (M1)
452.0832-02 (M2) 452.0820-002 (M2)

© 2010 Sandvik SRP AB Doc. no. R 223.1364 en Ver. 02 31

You might also like