PE 8036-M

Espresso coffee machine

Operating and Installation Instructions

Downloaded from www.Manualslib.com manuals search engine

 A

2
Downloaded from www.Manualslib.com manuals search engine
 C D

E/1 E/2

F/1 F/2

3
Downloaded from www.Manualslib.com manuals search engine
 G H

I/1 I/2

I/3 L

4
Downloaded from www.Manualslib.com manuals search engine
 M/1 M/2

N/1 N/2

O/1 O/2

5
Downloaded from www.Manualslib.com manuals search engine
 P/1 P/2

Q/1 Q/2

Q/3 Q/4

6
Downloaded from www.Manualslib.com manuals search engine
 Q/5 Q/6

Q/7 Q/8

R/1 R/2

7
Downloaded from www.Manualslib.com manuals search engine
 R/3 R/4

R/5 R/6

R/7 R/8

8
Downloaded from www.Manualslib.com manuals search engine
 S/1 S/2

S/3

9
Downloaded from www.Manualslib.com manuals search engine
 ENGLISH

INDEX 2. DESCRIPTION OF THE

CONTROL PANEL
1. Description of the Coffee (FIG. B)
machine
2. Description of the control 18. Steam tap knob
panel 19. Coffee measuring knob
3. Recommendations 20. Switch button (ON/OFF)
4. Instructions for the first use 21. Coffee button
5. Accessories (already 22. Hot water button
included) 23. Steam button
6. Coffee drawer (optional) 24. Light key
7. Coffee 25. “Power ON” Warning light
8. Hot water 26. Water temperature indicator
9. Steam 27. Coffee indicator
10. Recipes 28. Water indicator
11. Cleaning and servicing 29. Steam indicator
12. Installation 30. Light indicator
13. Appliance malfunction 31. Coffee measuring indicator (1
14. Technical specifications short- ,long coffee, 2 short- ,long
15. Declaration of guarantee coffees)
terms

2. RECOMMENDATIONS
1. DESCRIPTION OF THE
COFFEE MACHINE The use of this appliance is very
(FIG. A) easy. However, please, read
carefully and thoroughly this
1. Filter-holder ring nut instructions manual before
2. Steam pipe installing and operating your
3. Coffee pressing tool coffee machine, in order to avoid
4. Coffee grinder button making mistakes, to get better
5. Coffee measuring device results and to respect the
6. Cabinet locking button environment.
7. Drip tray
8. Coffee container
9. Water reservoir OPERATING
10. Grinding regulation knob
11. Filter-holder
12. 1-cup-filter
WARNING:
13. 2-cup-filter
14. Scoop To obtain an ideal coffee the
15. One-way nozzle filtering unit has to be very hot,
16. Two-way nozzle therefore please use the machine
17. Brita filter with extreme care to avoid being
scalded.

10

Downloaded from www.Manualslib.com manuals search engine

 has not suffered damage during
· This appliance must be used only transportation and that the power
by adults. Make sure that the cable or the plug is in good
appliance will be out of the condition. If the appliance is
reach of children. damaged, contact your retailer
· Do not attempt to modify this immediately.
appliance in any way. · The Manufacturer declines
· Always keep the appliance any responsibility for failure
clean. to observe these safety
· The external parts of this warnings.
appliance become very hot
while it is on and they will
remain hot after the appliance HOW TO RESPECT THE
is switched off. Keep children ENVIRONMENT
out of reach until the parts
have cooled down completely. PACKAGING
· Before cleaning or servicing, · All the packaging materials used
make sure that the appliance are environmentally friendly and
is disconnected from the can be recycled. Please discard of
electricity supply. all packaging material with due
· If there is something wrong, this regard for the environment.
cannot be solved by yourself.
Repairs made by inexperienced OLD APPLIANCES
people can cause damages and · At the end of the appliance’s
accidents. Read the contents of useful life, please discard of it at
this manual and, if you do not find an authorised disposal site or
the information you need, please recycling centre.
contact your nearest Service · Contact your local Council or
Force Centre. This appliance Environmental Health Office for
must only be serviced by an the address of your nearest
authorised engineer. Always recycling centre.
insist on genuine spare parts. · Before discarding the
appliance, cut off the mains
FOR INSTALLATION AND power cable so that it can no
SERVICING longer be connected to the
mains supply.
· This appliance must only be
installed by a qualified It is very important to keep this
electrician or competent instruction book with the
person. Ensure that the appliance for future reference. If
appliance is disconnected the appliance is sold or
from the electricity supply transferred to another person,
before any servicing or make sure that the instruction
cleaning is carried out. book is given to the new user, so
· After having taken the appliance that they can become familiar
out of the packaging check that it

11

Downloaded from www.Manualslib.com manuals search engine

 with the appliance’s functions and After that, insert the filter into the
with the recommendations given. reservoir (see chapter 12.
Installation “Water Connection”).

CE This appliance is in accordance

- If the machine will not be used for
long periods, change the water in
with the directive BT 73/23 the reservoir and empty the boiler
§ Electricity safety norms EN 60335- by making the machine dispense
1 (August 1995 - Safety for about half a litre of water (see
electrical household appliances chapter 8. Hot water).
and similar – General Norm) and
EN 60335-2-15 (April 1996 –
Specific Norms concerning heating FILL UP THE COFFEE BEANS
liquids appliances). CONTAINER
§ Directive EMC 89/336 in
conformity with the following · Push the cabinet locking button
norms: (E/1).
- 55014-1 · Take the coffee machine out of
- 55014-2 the cabinet using the special
- 61000-3-2 telescopic runners (E/2).
- 61000-3-3 · Put into the coffee container,
situated on the right side of the
appliance, about 200 gr. of coffee
4. INSTRUCTIONS FOR THE beans (H).
· Push again the coffee machine
FIRST USE into its relative seat as before
(F/1) using the special runners.
FILL UP THE WATER RESERVOIR · Push the locking button again
(F/2) so that the machine will be
· Push the cabinet locking button secured in the housing.
(E/1).
· Take the coffee machine out of
the housing using the special STARTING PROCESS
telescopic runners (E/2).
· Fill up the water reservoir (G) · Switch the coffee machine on by
situated on the left side of the pushing the ON button (B-20).
appliance with 2,5 litres of water. The red warning light (B-25)
· Push the coffee machine back into indicates the appliance is
the housing (F/1) and push the connected to the mains supply
locking button (F/2). (lamp illuminated = ON/ lamp out
· The hardness of the water: = OFF).
- Before filling up the water · Set the machine to dispense hot
reservoir, make sure that the Brita water (see paragraph 7. Hot
filter (A-17) has been soaked for water) and wait until the air
at least 30 min. in cold water contained in the boiler has
(please follow the instructions completely passed through the
indicated on the filter packaging). steam pipe (A-2) and water

12

Downloaded from www.Manualslib.com manuals search engine

 comes out (repeat this operation · Take the coffee machine out of
as many times as necessary) and the housing using the special
then set the knob to the off telescopic runners (E/2).
position (B-18). · The grinding level can be changed
· Meanwhile the water temperature using the special regulation knob
indicator lights up (B-26). It (A-10). By turning the knob in a
indicates the water heating clockwise direction the grinding
process in the boiler. When the becomes fine and the coffee
light goes out it means that the stronger. By turning the knob
machine has reached the right anti-clockwise the grinding
temperature and is ready for becomes coarse and the coffee
coffee. lighter.
· Push the coffee machine back into
the housing (F/1), using the
RESET OF STANDARD VALUES special telescopic runners.
· Push the cabinet locking button
· The coffee machine leaves the (F/2) again so that the machine is
factory set for the ideal Italian secure.
espresso coffee, as approved by
the coffee University of Naples
and in accordance with ILLY PROGRAMMING OF THE GROUND
standard. The setting values for COFFEE MEASURE
long coffee, on the contrary, are
in accordance with German · The coffee machine leaves the
standards. factory already set to
· If you wish to reset these dispense the ideal measure
standard values, just turn the for 1 cup of espresso.
machine on by pushing the · The ground coffee measure can
ON/OFF button (B-20) and the be increased or reduced and
steam button (B-23) at the same once selected, the machine can be
time. The flashing indicator lights programmed to remember this
show that the standard values measure. The ground measure
have been reset. that can be programmed only
refers to one single cup of coffee.
Grinding time for double coffee
comes out automatically after
having memorised a single coffee.
REGULATION OF THE GROUND · Set the coffee measuring knob (B-
COFFEE 19) on the “small cup” light on the
left (B-31), insert the 1-cup-filter-
· The coffee machine leaves the holder (A-11 / A-12) under the
factory already set on an ideal special funnel (A-5) and gently
coffee grinding level. push and hold the grinder button
· Push the cabinet locking button to make the grinder work (A-4).
(E/1). After 10 seconds the grinder will
start working and it is possible to

13

Downloaded from www.Manualslib.com manuals search engine

 programme the coffee measure. PROGRAMMING THE AMOUNT OF
Once the required ground coffee WATER TO BE DISPENSED
measure has been achieved
(recommended measure 7g, · Put a container under the steam
corresponding to 6 seconds of pipe (A-2)
grinding) just release the grinder · Turn the steam knob anti-
button (A-4) and the measure will clockwise (B-187).
be automatically memorised. · To access the programming stage
· Useful Advice: be careful to use Keep the water button pressed (B-
the right filter suitable for the 22) for about 5 seconds.
required ground coffee measure · Release the button when the
(A-12/13). water starts coming out.
· When the required quantity is
reached push the hot water
PROGRAMMING THE AMOUNT OF button again (B-22) and it will be
COFFEE TO BE DISPENSED automatically stored in the control
unit.
· The coffee measure can be set as
desired.
· Set the coffee measuring knob (B- 5. ACCESSORIES
19) on the required “coffee
measure” light and grind a certain · The coffee machine is equipped
measure of coffee in the filter- with one filter-holder (A-11) on
holder. Insert the filter-holder (A- which two filters can be inserted:
11) in the ring nut (A-1), and put - 1-cup (A-12)
under it one or two cups - 2-cup (A-13)
according to the selected If using paper pods, only use a 1-
programme. cup-filter.
· To access the programming stage · There is also a measure (A-14),
Keep the coffee button pressed which is useful in order to know
(B-21) for at about 5 seconds. the exact measure used for
· When the coffee starts coming ground coffee (about 7,2 g).
out, release the button. (The · The machine also has two
“coffee measure” light will be nozzles, a 1-(A-15) and a 2-way
flashing)(B-27). nozzle (A-16), that should be
· When the required quantity has screwed onto the filter-holder (A-
been dispensed push the button 11) according to the number of
again (B-21) and it will be cups of coffee required.
automatically stored in the control
unit. 6. DRAWER (OPTIONAL)

· The machine can also have an

optional well-equipped drawer
with a stainless steel front panel,

14

Downloaded from www.Manualslib.com manuals search engine

 PES 8036-m. The drawer has a
lot of useful compartments: USE OF COFFEE PODS
- One large compartment for cups (E.S.E SYSTEM)
and saucers
- A basin for coffee-grounds · E.S.E. system means Easy Serving
- A compartment for all accessories Espresso and corresponds to the
(filters, measure). international standard for brewing
- A tray coffee using coffee pods (one
throwaway portion of roasted
coffee) and a suitable coffee
7. COFFEE machine. The E.S.E. system is
easy, practical and ecological
USE OF COFFEE because it doesn’t need particular
servicing and it is environmentally
· Set the coffee knob (B-19) to the friendly. Moreover it is also a
required coffee measure. hygienic way to drink coffee
· Insert the filter-holder (A-11) thanks to its special packaging
under the Coffee measuring that avoids coffee coming out and
device (A-5). By pressing the it can be easily removed after use.
relative button (A-4), the · The machine can work also with
previously programmed coffee pods: one throwaway portion of
measure for one or two cups will roasted coffee (for one single
automatically come out. Once the coffee only).
required measure has been · Turn the knob (B-19) to the
dispensed, press the ground required coffee measure (long or
coffee with the pressing tool (A- short single coffee) and the
3). corresponding light will illuminate.
· Insert the filter-holder (A-11) · Insert the one throwaway pod
correctly into the ring nut (A-5) into the filter-holder (use the 1-
making sure that it is perfectly cup-filter)
secure: turn the filter-holder · Insert the filter-holder (A-11)
handle from left to right. correctly into the ring nut (A-5)
· Put one/two coffee cup/s under making sure that it is perfectly
the filter-holder nozzle (A-15/16). secure: turn the filter-holder
· Check that the red light of the handle from left to right.
water temperature indicator (B- · Put the cup under the 1-way
26) is out or wait until it goes out. nozzle (A-15).
· Push the coffee button (B-21) and · Check that the red light of the
the coffee measure dispensed will water temperature indicator (B-
be exactly the same as the one 26) is out or wait until it goes out.
selected and programmed. · Push the coffee button (B-21) and
· Take the filter-holder out of the the coffee will be dispensed.
ring nut and remove the ground · Take the filter-holder out of the
coffee. ring nut and remove the pod.

15

Downloaded from www.Manualslib.com manuals search engine

 HOW TO PREPARE AN EXCELLENT coffee should be ground coarser
ESPRESSO if there is a great quantity of
humidity in the air or it will
· To obtain an excellent espresso, a become thick and will come out
clean coffee machine and the with difficulty; with a dry climate
right temperature are the most on the contrary, the coffee should
important elements. be ground finer.
· Make sure that filter, filter-holder
and ring nut are always clean.
· Except when the machine will not 8. HOT WATER
be used for very long periods, it
should be kept on with the filter- · Put a container under the steam
holder inserted into the ring nut to pipe (A-2).
keep it warm. · Turn the steam knob anti-
· Warm the cups by filling them up clockwise (B-18).
with a little bit of water by · Push the hot water button (B-22)
pushing the coffee button. In that and the amount of water
way the water remained in the dispensed will be the same as
boiler will come out and the filter- previously programmed.
holder will be warmed. · Close the steam knob (B-18)
· After having made the last cup of
coffee, clean the filter-holder by
making a coffee without beans in 9. STEAM
order to remove all the remains of
ground coffee, that can change
HEATING LIQUIDS
the taste of the next coffee.
· To obtain an excellent espresso
· Press the steam button once
the brewing time should be about
(I/1); both the steam indicator
20- 25 seconds. Elements that can
(B-29), and the water
influence the brewing time are the
temperature indicator will be ON
grinding level of the coffee, the
(B-26).
ground coffee measure and how
· Wait until both of them go out
much the coffee has been
(I/2). Push the steam button
pressed. The machine is set to
again in order to stop producing
obtain a good-quality coffee. If
steam (B-23).
necessary, the grinding level can
· To check if the steam has been
be changed as well as the ground
produced push again the steam
coffee measure, (see chapter 4.
button (I/3); if the water
How to behave during the first
temperature indicator l (B-26)
process) in order to obtain an
remains out it means that steam
excellent espresso.
is ready to come out.
· Useful advice: coffee is a
· Put under the steam pipe (A-2) a
hygroscopic element that means
container with the liquid that has
that its characteristics are strictly
to be warmed.
connected with the weather
(humidity). Remember that the

16

Downloaded from www.Manualslib.com manuals search engine

 · Turn the steam knob anti- · Close the steam knob (A-18)
clockwise (B-18) · Attention: never make coffee
· Wait until the liquid becomes when the steam is ready to
warm. come out, if this is the case,
· Close the steam knob (B-18) reset the water level in the
· Attention: never make coffee boiler as explained in the next
when the steam is ready to point.
come out, if this is the case, · Attention: after every steam
reset the water level in the emission push the hot water
boiler as explained in the next button (B-22) without
point. opening the steam knob (B-
· Attention: after every steam 18) (in this way the water
emission push the hot water level in the boiler will be
button (B-22) without reset).
opening the steam knob (B-
18) (in this way the water
level in the boiler will be 10. RECIPES
reset).
ITALIAN CAPPUCCINO

HOW TO PREPARE CAPPUCCINO This is a normal espresso coffee with

FOAM steam-heated milk that gives the
coffee a milder flavour and a rich,
· Press the steam button once frothy topping. Serve in a large cup.
(I/1); both the steam indicator (B- Pour cold milk into a tall jug and heat
29), and the water temperature it using the steam spout if your
indicator will be ON (B-26). machine has one. Add only the froth to
· Wait until both of them go out the espresso coffee, to do this either
(I/2). Push the steam button tilt the jug slightly rocking it
again in order to stop producing backwards and forwards while you
steam (B-23). pour or use a spoon to scoop off the
· To check if the steam has been froth.
produced push the steam button You can also add a dusting of cocoa
again (I/3); if the water powder to taste.
temperature indicator (B-26)
remains out it means that steam VIENNESE CAPPUCCINO
is ready to come out.
· Put under the steam pipe (A-2) a This variation is the result of age-old
container with the milk that has to Austrian tradition.
be warmed. Prepare a 'long' espresso by letting the
· Turn the steam knob anti- machine run for longer than usual (30-
clockwise (B-18) 35 seconds), add hot milk followed by
· While the steam is coming out whipped cream. Serve in a medium-
move the container up and down, sized cup (midway between and
until the milk produces the right espresso cup and a cappuccino cup).
foam for your cappuccino. Decorate with flakes of chocolate.

17

Downloaded from www.Manualslib.com manuals search engine

 COLD ESPRESSO SHAKE Move to the refrigerator ½ hour
before serving.
Frothy and extremely refreshing, this Serve two-three balls of the ice-cream
makes a pleasant drink on hot days. in a small bowl and decorate with
Prepare an espresso coffee, add sugar roasted coffee beans.
and pour into a cocktail shaker with
large ice cubes. Shake for a few
seconds. 11. CLEANING AND
Serve in a tumbler or flûte. SERVICING

OUTER PARTS
IRISH COFFE
· The outer parts of the machine
Any energy-giving tonic.
should only be cleaned with
Warm a tall glass and mix eight parts
sponges or soft cloths to avoid
of hot coffee with one part whisky and
scratching. (L).
brown sugar.
· Under no circumstances should
Gently pour freshly whipped cream
solvents, abrasive powders or
over the back of a spoon so that it
steel wool be used.
floats on the coffee: the result is a
layer of cool white cream on top of the
hot dark coffee.
DRIP TRAY

MEXICAN COFFEE · Remove the drip tray from the

machine (M/1,M/2).
Intense and exotic. · Make sure that the drip tray is
Mix together a portion of double periodically emptied (A-7) to avoid
cream, half a teaspoon of cinnamon, a any liquid seeping out that could
pinch of nutmeg and sugar in a small cause damages to the underlying
cup and beat until it becomes frothy. furniture.
Place a teaspoon of chocolate syrup, a · The drip tray and grid can be
pinch of cinnamon and the coffee into washed in a dishwasher.
a medium-sized cup and blend
together.
Top with a teaspoon of vanilla-
flavoured cream.
FILTER / FILTER-HOLDER / RING
NUT
CAPPUCCINO ICE-CREAM
· Always keep the filter (A-15/16),
Heat 2 cups of espresso coffee, ¾ cup
filter-holder (A-11) and ring nut
of single cream and ½ cup sugar in a
(A-5) clean. Always Clean away
pan and bring to boiling point.
coffee residue because it can
Leave to cool before placing in the
change the taste of the next cups
freezer for 4-5 hours.
of coffee.

18

Downloaded from www.Manualslib.com manuals search engine

 · Every month wash the filter and pods, so that only water will come
filter holder in the dishwasher. out of the filter holder until the
· The steam nozzle (A-2) should be reservoir is completely empty.
periodically cleaned. It could - Fill the reservoir again with cool
become dirty inside by making clean water and repeat the above
cappuccinos. It should be process (without using coffee as
removed (N/1,N/2) and washed before) in order to rinse the
with a sponge in warm water. boiler.
Attention: Before cleaning the - The coffee machine is now ready
steam pipe, always turn the for use.
machine off and wait at least
20 minutes after use to allow
the steam pipe to cool. This 12. INSTALLATION
will avoid the risk of burns.
INSTALLING THE MACHINE INTO
FURNITURE HOUSING
WATER RESERVOIR
For the machine to operate correctly,
· If the machine is not be used for it must be installed into a suitable
long periods, change the water in housing unit.
the reservoir and empty the boiler In conformity with safety norms, the
by pushing the coffee button (B- protection to avoid contacts with the
21) as many times as necessary. electrical parts and the parts protected
· Periodically clean the water only with functional insulation should
reservoir(A-9) to remove the fur. be guaranteed by a correct insertion of
· The water reservoir can be the appliance.
washed in a dishwasher. All components that guarantee
· The Brita filter should be replaced protection, even a cover panel (if the
after approximately 2000 cups of appliance for example is situated at
coffee or at least after six months. one extremity of the modular
furniture), should be well fastened so
that they can not be removed without
BOILER CLEANING CYCLE using tools.
The appliance should be installed at a
· Like all the appliances that use certain distance from refrigerator or
water, it is possible that fur will freezer, because the heat given out
appear in the boiler of the coffee from it can impair their functioning.
machine.
· Every six months the following
process should be carried out:
- Fill up the water reservoir with 1,5
litres of water also adding half a
glass of vinegar or citric acid.
- Dispense some coffee (see
paragraph 6. Coffee), but without
using either ground coffee or

19

Downloaded from www.Manualslib.com manuals search engine

 COMPONENTS FOR THE compensate the internal width of the
INSTALLATION seat. For obtaining a width of
562/560mm see picture P/1 and P/2.
The coffee machine is equipped with
the following components for the
installation (C): INSTALLATION WITHOUT
SUPPORT
1. 2 side-plates 1mm
2. 4 side-plates 2mm · Put the suitable plates (P/1,P/2)
3. 2 telescopic runners on the both sides of the housing,
4. 1 mains terminal block fixing them with the double-
5. 1 cabinet lock tongue sticker strips (Q/1). Pay attention
6. 1 cabinet locking bar to the position of the bevel which
7. 2 L brackets indicates the right position of the
8. 2 rectangular washers plates.
9. 1 mains power cable · Release the telescopic runners
10. 4 double stickers for fixing the and extract the front section (Q/2)
plates · Fix the telescopic runners’
11. 8 screws M4X16 bearings with the screws as
12. 12 self-threading screws shown in picture Q/3
13. 4 washers · Fix the 2 L brackets as shown in
picture Q/4
· Install the cabinet locking bar
ELECTRICAL CONNECTION using the rectangular washers and
the specific M4 screws as shown
· Fix the mains terminal block (C- in picture Q/5
4) to the top back left corner of · Install the telescopic runners on
the cabinet (O/1). the both sides of the machine as
· Connect the mains cable to the shown in picture Q/6
terminal block ensuring correct · Insert the machine: the telescopic
polarity (C/4), and connect the runners should be coupled with
coiled mains input cable between the runners‘ bearings which are
the appliance and the terminal already fastened on the sides.
block. (Q/7)
· Check the safety lock clicks when
the runners are pushed in.
USE OF THE SIDE PLATES · Adjust the cabinet locking bar if
necessary, for the correct locking
The width of the cabinet in which the position of the machine, and
coffee machine should be inserted is tighten the screws as shown in
determined by the thickness of the picture Q/8
cabinet’s sides. To compensate the · Push the cabinet block button so
different possible measurement, the that the machine will be well
appliance is equipped with 6 plates, 4 fastened (F/2).
are 2mm in thickness and 2 are 1mm.
thick. They should be used to

20

Downloaded from www.Manualslib.com manuals search engine

 INSTALLATION WITH SUPPORT WATER CONNECTION

· Put the suitable plates (P/1,P/2) · Push the cabinet locking button
on both sides of the cabinet sides, (E/1) .
fixing them with the double- · Take the coffee machine out of
sticker strips (R/1) the cabinet using the special
Pay attention to the position telescopic runners (E/2)
of the bevel which indicates · Remove the lid of the water
the right position of the reservoir (A-9), and take the Brita
plates. filter out (A-17)
· Release the telescopic runners · Remove its packaging and soak
and extract the front section (R/2) the filter in cool water for half an
· Fix the telescopic runners’ hour; then, insert it into the
bearings with the screws as reservoir (S/1)
shown in picture (R/3) · Insert the flexible suction water
· Put the lock bracket in the correct pipe (the one with the filter) and
position and fix it with two self- the ventilation pipe in the special
threading screws onto the base as grooves (S/2). Push the pipes into
shown in picture R/4,R/5. the reservoir end-plate (S/3)
· Install the telescopic runners on · Fill up the reservoir with cool
the both sides of the machine as water
shown in picture R/6 · Attention: Only fill the reservoir
· Insert the machine: the telescopic with cool drinking water: under no
runners should be coupled with circumstances put milk or other
the runners ‘ bearings which are liquids!
already fitted on the sides. (R/7). · Brita filters can be purchased from
· Ensure the safety lock operates our Service Centres, retailers of
when the runners are pushed in. electric household appliances or
· With the machine completely retailers of this type of spare
inserted in the housing use the parts.
cabinet locking button (A-6) and
check that it functions correctly.
· Adjust the cabinet locking bracket, 13. WHAT TO DO IF….
if necessary and secure as shown
in picture R/8
If your machine does not function,
· Push the cabinet locking button so
please ensure that the fault is not
that the machine will be correctly
caused by:
fastened (F/2).
1. A power failure
2. The water reservoir being empty.

If you require a replacement power

cable or if your machine requires
servicing, please contact your local
Service Force Centre.

21

Downloaded from www.Manualslib.com manuals search engine

 14.TECHNICAL FUSES
SPECIFICATIONS

For the general measurement of the

coffee machine see pictures.

· Width 594 mm

· Depth 260 mm

· Height 357 mm

· Capacity 3 litres

· Net Weight 17 kg

· Gross Weight 19 kg F1: Fuse Ø5x20mm Vn=250V In=10A

· Mains Voltage 230 - 240 V F2: Fuse Ø5x20mm Vn=250V In=0,5A

· Total nominal power 1150 W

· Heating element input 1000 W

· Electric pump input 50 W

· Working pressure 12 bar

· Fuse 13 A

22

Downloaded from www.Manualslib.com manuals search engine

 15. DECLARATION OF
GUARANTEE TERMS

SERVICE & SPARE PARTS CUSTOMER CARE

If you wish to purchase spare parts or For general enquiries concerning your
require an engineer, contact your AEG appliance or for further
local AEG Service Force Centre by information on AEG products please
telephoning: contact our Customer Care
Department by letter or telephone at
the address below or visit our website
08705 929 929 at www.aeg.co.uk

Your telephone call will be

automatically routed to the Service Customer Care Department
Centre covering your post code area. AEG Domestic Appliances
55-77 High Street,
For the address of you local Service Slough,
Force Centre or for further information Berkshire,
regarding Service Force, please visit SL1 1DZ
the website as www.serviceforce.co.uk
Tel. 08705 350350 (*)
When you contact the Service Centre
they will need the following (*) Calls to this number may be
information: recorded for training purposes.
1. Your name & address, including
post code.
2. Your telephone number
3. Clear and concise details of the
fault.
4. The model, serial and production
number.
This information can be found on the
rating plate. The rating plate is on the
inner edge of the door on the right.
5. Date of purchase. Please note that
it will be necessary to provide proof of
purchase for any in guarantee service
call.

In-guarantee customers should ensure

that the chapter headed "What to do
if...“ has been read, as the engineer
will make a charge if the fault is not a
mechanical or electrical breakdown.

23

Downloaded from www.Manualslib.com manuals search engine

 GUARANTEE CONDITIONS

AEG offer the following guarantee to the first purchaser of this appliance.
1. The guarantee is valid for 12 months commencing when the appliance is handed
over to the first retail purchaser, which must be verified by purchase invoice or similar
documentation.
The guarantee does not cover commercial use.
2. The guarantee covers all parts or components which fail due to faulty workmanship
or faulty materials. The guarantee does not cover appliances where defects or poor
performance are due to misuse, accidental damage, neglect, faulty installation,
unauthorised modification or attempted repair, commercial use or failure to observe
requirements and recommendations set out in the instruction book. This guarantee
does not cover such parts as light bulbs, removable glassware or plastic.
3. Should guarantee repairs be necessary the purchaser must inform the nearest AEG
Service Force Centre (manufacturer’s service or authorised agent). AEG reserves the
right to stipulate the place of the repair (i.e. the customer’s home, place of installation
or AEG workshop).
4. The guarantee or free replacement includes both labour and material.
5. Repairs carried out under guarantee do not extend the guarantee period for the
appliance.
Parts removed during guarantee repairs become property of AEG.
6. The purchaser’s statutory rights are not affected by this guarantee.

EUROPEAN GUARANTEE

If you should move to another country within Europe then your guarantee moves with
you to your new home subject to the following qualifications:
* The guarantee starts from the date you first purchased your product.
* The guarantee is for the same period and to the same extent for labour and parts as
exist in the new country of use for this brand or range of products.
* This guarantee relates to you and cannot be transferred to another user.
* Your new home is within the European Community (EC) or European Free Trade
Area.
* The product is installed and used in accordance with our instructions and is only
used domestically, i.e. a normal household
* The electrical supply complies with the specification given in the rating label.
* The product is installed taking into account regulations in your new country.
Before you move, please contact your nearest Customer Care centre, listed below, to
give them details of your new home. They will then ensure that the local Service
Organisation is aware of your move and able to look after you and your appliances.

France +33 (0)3 44 62 2929

Germany +49 (0)800 2347378
Italy +39 (0)800 117511
Sweden +46 (0)8 672 5360
UK +44 (0)1753 219899

24

Downloaded from www.Manualslib.com manuals search engine

 25

Downloaded from www.Manualslib.com manuals search engine

 A B/1

B/2 B/3

26

Downloaded from www.Manualslib.com manuals search engine

 B/4 B/5

B/6 B/7

27

Downloaded from www.Manualslib.com manuals search engine

 B/8 B/9

C/1 C/2

28

Downloaded from www.Manualslib.com manuals search engine

 C/3

29

Downloaded from www.Manualslib.com manuals search engine

 INDEX · Position the side plate (*) and fix
it with the double-sticker strips.
1. Description of the coffee (B1)
drawer · Fix the coffee drawer’s runners
2. Installation (5-6) with the screws. (B2)
3. Adjustment of the front panel · Fix the brackets (*) with the
screws. (B3)
· Fix the cross-bar (*) using the
1. DESCRIPTION OF THE correct accessories. (B4)
COFFEE DRAWER · Install the runners (*) of the
(PICTURE A) appliance. (B5)
· Insert the drawer. (B6)
This drawer is optional in the · Insert the coffee machine. (B7)
coffee machine. It can be helpful · If necessary take the coffee
for the user in making coffees or machine and the drawer out of
cappuccinos. It can contain all the cabinet and adjust the cross-
coffee machine’s accessories and bar (*). (B8)
has also a basin for coffee · Insert again in the cabinet the
grounds as well as an useful tray. coffee machine and the drawer.
(B9)
1. Drawer structure
2. Shaped plate
3. Tray
4. ADJUSTMENT OF THE
4. Basin for coffee grounds
5. Left runner FRONT PANEL
6. Right runner
7. 3 self-threading screws If necessary the front panel of the
4,8x15 drawer can be adjusted in order to be
8. 8 self-threading screws perfectly aligned to the cabinet and to
4,8x15 the other electric household
9. 1-cup-filter holder’s seat appliances.
10. Measure’ s seat
11. 2-cup-filter holder’s seat
VERTICAL ADJUSTMENT

3. INSTALLATION To adjust vertically the front panel of

the drawer release the screw (X-C1),
make the necessary adjustments and
· Attention: Where instructions screw down the screw again. (C1)
are marked with an *, please
refer to chapter 12 titled
“Installation without
support”.

30

Downloaded from www.Manualslib.com manuals search engine

 HORIZONTAL ADJUSTMENT

To adjust horizontally the front panel

of the drawer release the 2 screws (Y-
C2); after the adjustments screw down
the 2 screws again (C2).

FIXING THE FRONT PANEL

After having made the adjustments,

the front panel has to be finally fixed,
using the 3 screws (7) that the drawer
is equipped with (C3).

31

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine