Industry

2
 CONTENT 3

Ta b l e o f c o n t e n t s 3

What sets us apart 4

Press welded grating 8

Press locked grating 12

MEISER plated - grating 14

Profile planks & chequer plate 18

Fixing options 24

Stair treads 30

Service 34

Contact 35

Imprint 36
4 INTRODUCTION

What sets us apart

MEISER has been offering an extraordinary variety of consulting competence.

products for industrial floor coverings for many years.
These include various types of grating, profile planks, Designed specifically for our partners is a bespoke
chequer plate, fall protection mats and GRP systems. login area where it is possible to check progress of
their orders and utilise other benefits.
To meet the special requirements for industrial appli-
cations of floor coverings and stair treads, MEISER‘s
strengths include quality, reliability and excellent

Installation planning
For your project, a team of over 40 well-trained and
experienced employees are available at both German
locations.
No only do we offer a free installation planning service,
but our technicans will also support you with their sug-
gestions for optimizing the floor covering whilst recom-
mending any edditional support requirments.

Project Management and Service

Our team also includes project managers with const-
ruction site experience who will support and guide you
through all stages in the execution of your project
and are always available to answer your questions and
requests.

We can also offer site measurements as part of our ser-

vices. In addition to this, we also offer support during
the start of assembly by our specialist personnel for
major projects.

Product labeling/marking
In order to ensure efficient assembly on the construc-
tion site and to simplify customs clearance of goods
during transport, the importance of reliable delivery
documentation has grown considerably in recent
years. MEISER is your experienced and reliable partner
in these processes.

The introduction of our shipping labels and the creation

of packing lists for each packaging unit ensures per-
fect delivery documentation on one hand, on the other
hand, the traceability of individual component parts on
the construction site is significantly improved.

Thus, our adhesive identification labels can be printed

with various information according to customer requi-
rements and can still be read perfectly even after a pro-
longed transport in sea containers or a downtime on
the construction site.
GRATING
8 PRESS WELDED GRATING

MEISER Press welded grating

MEISER press welded grating is traditionally used in a positive effect on the grating installation costs.
in many areas of industry. The continuous welding
MEISER press welded grating is primarily used in the
of each individual intersection point of the bearing
oil and gas industry, mining industry and in power sta-
bar and cross bar produces an extremely stable and
tions. Where strong shearing forces occur and platform
hard-wearing structure. The cross bars normally used
flooring has to be changed frequently, the superiority
in the press welded grating are twisted square bars,
of the press welded grating comes into its own. Steel
which are resistance welded to the bearing bars.
fabricators also appreciate the press welded grating,
Manufacture is carried out on production lines that have whose stability is ideally suited to the subsequent wor-
been developed by ourselves, where we can produce king of materials.
made-to-measure grating panels without waste and in
MEISER press welded grating panels are normally
accordance with our customer requirements. This is
banded with a bead profile and can be produced in
achieved by the fact that our machines can produce pa-
V2A and V4A with round or twisted squere cross bars.
nels with cross bar lengths of up to 1250 mm, in con-
Galvanized grating is normally produced with 5.6mm
trast to the otherwise usual 1000 mm. For industrial
twisted square cross bars, however on request can be
platforms or catwalks, we can therefore save up to 20
provided with 7 or 8 mm twisted square cross bars.
% in the number of fixings required which also results

lso
t i n g are a
d gra steel!
r e s s welde stainless
P ble in
availa
Common mesh sizes
Bearing
Crossbar
bar
15,08 - - - 38,1 50,8 76,2 101,6
17,15 - - - 38,1 50,8 76,2 101,6
20,77 - 24,0 - 38,1 50,8 76,2 101,6*
23,69 - 24,0 - 38,1 50,8 76,2 101,6*
25,00 - - - - - 76,2 101,6
30,15 - - - 38,1 50,8 76,2 101,6
33,00 - - 31,75 - - - -
34,30 19,25 24,0 - 38,1 50,8 76,2 101,6
41,45 - 24,0 - 38,1 50,8 76,2 101,6
45,23 - - - 38,1 50,8 76,2 101,6
51,45 - - - 38,1 50,8 76,2 101,6
60,30 - 24,0 - 38,1 50,8 76,2 101,6
68,60 - 24,0 - 38,1 50,8 76,2 101,6
*possible with restrictions

Standard bearing bar profiles

Bearing bar
2 mm 3 mm 4 mm 5 mm 6 mm 8 mm

20/2 20/3 20/4 20/5 -

25/2 25/3 25/4 25/5 -
30/2 30/3 30/4 30/5 -
35/2 35/3 35/4 35/5 -
40/2 40/3 40/4 40/5 -
Press welded grating with a bead profile
45/3 45/4 45/5 -
- 50/3 50/4 50/5 50/6 50/8
- 60/3 60/4 60/5 60/6 60/8
- 70/3 70/4 70/5 70/6 70/8
- 80/3 80/4 80/5 80/6 80/8
90/3 90/4 90/5 90/6 90/8
100/3 100/4 100/5 100/6 100/8
10 P R E S S W E L D E D G R A T I N G O P T I O N S

MEISER press welded grating options

Press welded grating is available in numerous ver- account the relevant country safety requirements.
sions; these often depend on country-specific requi-
rements. The clear mesh width often plays an im- This guarantees that a test ball with a specific diameter
portant role in terms of safety. As the press welded cannot fall through. Special welding regulations can of
grating cannot provide the fine mesh grid of a press course also be implemented by us on request.
locked grating owing to the manufacturing process,
other versions have been developed which take into

MEISER Offshore-Press welded

grating
This type of grating has been specially designed for use
in the offshore oil and gas industry. The background to
this is the specification that a test ball with a diameter
of 15 mm must not fall through the grating. In order
to guarantee this, an intermediate round bar is welded
parallel and centrally between the bearing bars to the
underside of the twisted square cross bars using the
automatic resistance welding method. This provides
the offshore grating with additional stability, which is
very useful in the harsh conditions on offshore oil rigs. Standard bearing profiles

Bearing Bar 3 mm Bearing Bar 5 mm

25/3 25/5

Common mesh sizes 30/3 30/5

35/3 35/5
Bearing Bar Crossbar 40/3 40/5

34,30 101,6 45/3 45/5
38,28 101,6 50/3 50/5
60/3 60/5

 11

MEISER press welded grating with

smooth round bars
The classical press welded grating is produced with
twisted square bars, which offer a certain degree of slip
resistance. If aesthetic aspects are important, it is also
possible to use smooth round bars as cross bars. This
version is possible for all common mesh spacing.

Common meshes
Bearing
Crossbar
bar
15,08 - - - 38,1 50,8 76,2 101,6
17,15 - - - 38,1 50,8 76,2 101,6 Standard bearing bar profiles
20,77 - 24,0 - 38,1 50,8 76,2 101,6*
23,69 - 24,0 - 38,1 50,8 76,2 101,6* Bearing bar Bearing bar Bearing bar Bearing bar
25,00 - - - - - 76,2 101,6 2 mm 3 mm 4 mm 5 mm
30,15 - - - 38,1 50,8 76,2 101,6 - 20/3 - -
33,00 - - 31,75 - - - - 25/2 25/3 25/4 25/5
34,30 19,25 24,0 - 38,1 50,8 76,2 101,6 30/2 30/3 30/4 30/5
41,45 - 24,0 - 38,1 50,8 76,2 101,6 35/2 35/3 35/4 35/5
45,23 - - - 38,1 50,8 76,2 101,6 40/2 40/3 40/4 40/5
51,45 - - - 38,1 50,8 76,2 101,6 45/2 45/3 45/4 45/5
60,30 - 24,0 - 38,1 50,8 76,2 101,6 - 50/3 50/4 50/5
68,60 - 24,0 - 38,1 50,8 76,2 101,6 - 60/3 60/4 60/5
- 70/3 70/4 70/5
*possible with limitations - - 80/4 80/5

MEISER press welded grating with

perforated sheet
If the customer requires the use of press welded grating m
8m
but would nevertheless like to ensure that the grating
is 8 mm ball proof, then this is the grating that should
be used. By welding perforated sheets with an aperture
of not more than 8 mm between the bearing bars, it
is possible to produce a very “close-meshed” grating.

This grating corresponds to the Spanish standard no.

486/1997 (BO 23rd April 1997, no. 97/1997).

Standard bearing bar profiles

Bearing Bar 2 mm Bearing Bar 3 mm Common mesh sizes
25/2 25/3 Bearing Bar Crossbar
30/2 30/3
34,30 38,1 50,8
40/2 40/3
12 P R E S S L O C K E D G R A T I N G

MEISER press locked grating

The press locked grating is the most commonly used

type of grating in many European countries today.
Thanks to a production technology which differs signi-
ficantly from that used for the press welded grating, and
which enables a much greater variety of products, this
type of grating provides for an almost unlimited num-
ber of applications. Its design allows for great flexibility
regarding the mesh size and the height and thickness
of the bearing bars. In combination with the variety of
materials from which press locked grating can be ma-
nufactured, we can produce a grating that is exactly in locked grating can be manufactured with an anti-skid
line with the customer‘s wishes and it‘s intended use. top surface where either or both the bearing bars and
the corn bars have the top edges serrated.
For a press locked grating, the cross bars – which are
normally made from cold-rolled flat steel – are pres- For this, the bearing and/or cross bars are notched on
sed into the previously punched-out bearing bars. The the upper side. With press locked grating, the opposite
banding bars are designed as T-shaped or flat sections end meshes are usually of equal size. But here, too,
and are attached by means of automatic resistance applies what has been said above: there is almost no
welding. If there is an increased risk of slipping, press limit to the imaginable uses and designs of press lo-
cked grating.

e also
r a t i n gs ar el!
dg ste
locke inless
Press able in sta
avail

Common mesh sizes for bearing bars from 2 to 3 mm Bearing Bar Bearing Bar Bearing Bar Bearing Bar
2 mm 3 mm 4 mm 5 mm
Bearing
Crossbar
Bar
20/2 20/3 - -
11,1 11,1 16,65 - 22,2 33,3 44,4 49,95 66,6 99,9 25/2 25/3 25/4 25/5
21 11,1 16,65 21,0 22,2 33,3 44,4 49,95 66,6 99,9 30/2 30/3 30/4 30/5
22,2 11,1 16,65 21,0 22,2 33,3 44,4 49,95 66,6 99,9 35/2 35/3 35/4 35/5
33,3 11,1 16,65 21,0 22,2 33,3 44,4 49,95 66,6 99,9 40/2 40/3 40/4 40/5
44,4 11,1 16,65 21,0 22,2 33,3 44,4 49,95 66,6 99,9 45/2 45/3 45/4 45/5
55,5 11,1 16,65 21,0 22,2 33,3 44,4 49,95 66,6 99,9 50/2 50/3 50/4 50/5
66,6 11,1 16,65 21,0 22,2 33,3 44,4 49,95 66,6 99,9 - 60/3 60/4 60/5
99,9 11,1 16,65 21,0 22,2 33,3 44,4 49,95 66,6 99,9 - 70/3 70/4 70/5
- 80/3 80/4 80/5
- 90/3 90/4 90/5
- 100/3 100/4 100/5
Common mesh sizes for bearing bars from 4 to 5 mm - - - 110/5
- - - 120/5
Bearing
Crossbar - - - 130/5
Bar
- - - 140/5
21 16,65 22,2 33,3 44,4 50 66,6 99,9
- - - 150/5
25 16,65 22,2 33,3 44,4 50 66,6 99,9
- - - 160/5
33,3 16,65 22,2 33,3 44,4 50 66,6 99,9
- - - 170/5
50 16,65 22,2 33,3 44,4 50 66,6 99,9
66,6 16,65 22,2 33,3 44,4 50 66,6 99,9
99,9 16,65 22,2 33,3 44,4 50 66,6 99,9

For special requests we are always at your disposal!

 13

Heavy duty grating

From the name you can guess the intended applica-

tion of the MEISER heavy duty grating. This is press
locked grating with particularly deep and/or thick bea-
ring bars. The dimensions of the cross bar are adapted
accordingly. Counter gear teeth during the pressing
process gives the MEISER heavy duty grating additi-
onal stability, so that surface loads of more than 50
tonnes and wheel loads of 10 tonnes can be withstood
without difficulty.
Standard bearing bar profiles
We adapt the exact design from case to case to the
Bearing bar 8 mm Bearing bar 10 mm Bearing bar 12 mm
width between supports and the intended use.
80/8 80/10 -
90/8 90/10 -
100/8 100/10 100/12
110/8 110/10 110/12
120/8 120/10 120/12
130/8 130/10 130/12
Common mesh sizes 140/8 140/10 140/12
150/8 150/10 150/12
Bearing Bar Crossbar - - 160/12
25 50 75 100 - - 170/12
50 50 75 100 - - 180/12
75 50 75 100 - - 190/12
100 50 75 100 - - 200/12
MEISER PLATED GRATING
16 T O P P L A T E

Grating with welded-on chequered plate.

(MEISER Plated grating)

MEISER Plated grating combine the different advanta-

ges of a chequered plate with those of a grating. The
closed surface of a chequered plate is supplemented
by the high stability of a grating, for example to make
a drivable surface. This combination creates a highly
durable product.

The load-bearing capacity of MEISER Plated grating

can be individually adapted and optimised to the requi-
rements of the respective construction project.

In addition, we would be pleased to test the product

tailored to your needs together with our in-house struc-
tural engineer during an impact test and prepare the
corresponding documentation.

This also applies to fixing systems that can be provided

for the respective applications.

Preferred mesh sizes for MEISER Plated Grating

Bearing
Crossbar
bar
34,30 - - - 38,1 50,8 76,2 101,6
33,30 - - - 33,3 66,6 99,9
44,40 - - 33,3 66,6 99,9
66,60 - - 33,3 66,6 99,9
*other combinations possible on request

Prefered chequer plate dimensions

3/5 4/6 5/7 6/8

PROFILE PLANKS & CHEQUER PLATE
20 P R O F I L E P L A N K I N G S

MEISER profile planking

MEISER profile planking is an alternative to standard

MEISER grating, especially when large span widths
have to be bridged or a more closed surface is required.
The special embossing and perforation of the surface
ensure very high levels of slip resistance. Everywhere in
industry where work is carried out with slip-enhancing
substances, profile planking is a good choice.

We have over 25 different surfaces in our product port-

folio, the Drainstep RH3 and Steplarm G shown in this
flyer are only extracts from our product range. Further
surfaces for special applications can be found in our
profile planking brochure.

The possibility of producing elements of up to a length of

8,00 metres ensures fast installation, which is further ac-
celerated with innovative fixing clips that we have deve-
loped ourselves. For indoor applications it is also possi-
ble to use profile planking consisting of pre-galvanised
steel strip. This results in a significant cost advantage.

One special field is flame-retardant profile planking.

This version has been tested and certified by the MFPA
(Material Research and Testing Institute) and is suita-
ble, for example, as a transformer tray covering.
 D R A I N S T E P R H 3 21

Drainstep RH3

MEISER profile planking Drainstep RH3 is a grating that

has been further developed in 2013. Its characteristics
make it unique in the MEISER range of profile planking.

The 70% free cross-section ensures a maximum drai-

nage effect. DRAINSTEP RH3 was developed in accor-
dance with EN ISO 14122-2 and ensures that a ball
with Ø 20mm does not fall through. The steeply positi-
oned ridges provide excellent transverse rigidity for this
profile planking.

6±1
Dimensions

H
Material Sheet AS Class
thickness tu*

Raw / hot-dip galvanised steel [DD11] 2,0 / 2,5 R11 42 90 5,5

Sendzimir galvanised steel [DX51] 2,0 / 2,5 R11

Preferred widths 200 / 250 / 300 / 312 / 324

ca. 18
42,5

/ 333
Preferred heights 40 - 150 mm, other heights on
request
Length up to max. 8.000 mm
Length divider 42,5 mm

ca. 18
Special sizes or special materials on request. All dimensions in mm.
11 85

LL 10.2 x 13 turned 90° on

opposite side
22 S T E P L A R M G

Steplarm G

The surface structure is comparable with chequered

plate and can be seen as an attractive alternative to
it, but with higher load capacity at larger spans. It is
a closed grating which proves very effective in public
areas with pedestrian traffic and in commercial use.

Dimensions

H
Material Sheet AS Class
thickness tu*

Raw / hot-dip galvanised steel [DD11] 2,0 / 2,5 / 3,0 R10 smooth edging possible

Sendzimir galvanised steel [DX51] 2,0 / 2,5 / 3,0 R10

Aluminium [AIMg3] 2,5 / 3,0 -
Stainless steel [1.4301] 2,0 -
Preferred widths 200 / 240 / 270 / 298 variabel
Preferred heights 50 / 75 / 100 other heights on
request
60

Lengths max. 8.000 mm

Length divider 60

LL 10.2 x 13
Special sizes or special materials on request. Available dimensions according to the turned 90° on opposite
stock program. All dimensions in mm. Cut in embossing
side
 C H E Q U E R P L A T E S 23

MEISER chequer plate Material

MEISER also offers chequer plate as a conventional Raw / hot-dip galvanised steel

closed cover for industrial floor applications. Depen- Aluminium (AlMg³)

ding on the requirements of our customers, the chequer Stainless steel (1.4301)

plate can be cut, perforated, lowered and edged as

well as supplied with a surface finish. The advantages Common material strengths
of chequer plate as a floor covering is the low depth 3/5, 5/7, 6/8, 8/10, 10/12
height and the high acceptance of this product in vari- other dimensions on request
ous application areas.

The disadvantage of the relatively low load-bearing

capacity can be compensated by structural reinforce-
ments or the use of MEISER Plated grating.

Yo u r a d v a n t a g e s

- We manufacture for you individually and make made to measure panels to you desired shape.
- On request we create the installation plans
- Sizing and positioning according to your specifications
- We make all the necessary preparations for fastening, e.g. countersunk holes
- Production of bent or welded-on kick plates as well as butt straps / reinforement is possible
- We stock sheets of standard industry dimensions thus guaranteeing a short delivery time
- Quality assurance is a fundamental principle for us
- MEISER chequer plates guarantee easy installation and assembly
- Good trafficability with pallet trucks or small sliding carriages
FIXING OPTIONS
26 F I X I N G S Y S T E M S

Fixing systems
MEISER grating fixing clips are an important part of our but also works together with well-known fastening spe-
service. The grating can only fulfil its function properly cialists. Together with HILTI, the XMGR clamp has been
if it is correctly attached, to its substrucure as otherwise developed, which is resistant to vibrations and offers
accidents can quickly happen. enormous installation advantages.

MEISER has the proper fixing clip for every application, On the following pages we show you the most common
from the simple standard clamp to the customised indi- fixing clips, which in most cases represent a good and
vidual solution. MEISER produces many clamps itself, low-cost solution.

Head bolt fastener

Consisting of fired stud and top clip; for highly corrosive
environments (e.g. offshore), also available as X-BT.

Galvanised V4A
Designation mesh [mm] mesh [mm]

X-FCM + X-M8 22 x 22 – 44 x 44 22 x 22 – 44 x 44
X-FCM + X-BT 22 x 22 – 44 x 44 22 x 22 – 44 x 44
X-GR-RU 33 x 33 −
H E A D B O LT F A S T E N E R

Hilti-clamp XMGR
Consisting of saddle top clip and lower bottom clamp
connected to one another; high resistance to vibrations,
easy portability by 1 person and thereby significantly
shorter installation times.

Galvanised V4A
Designation mesh [mm]

XMGR 33 x 33 / 34 x 38 / 34 x 24

max. grating height 40mm

H I LT I - C L A M P X M G R

The illustrations are not assembly instructions.

 F I X I N G S Y S T E M S 27

Clamp B
Consisting of a saddle top clip, lower bottom clamp
lower part, M8x60 hexagon bolts and M8 square nut.

Galvanised V2A
Designation mesh [mm] mesh [mm]

M0531 33 x 33 33 x 33
M0531 34 x 38 34 x 38
M2231 33 x 21 33 x 21

CLAMP B

Clamp B10
Consisting of a stirrup top clip, hexagon socket
bolt, lower bottom clamp and nut.

Galvanised V2A
Designation mesh [mm] mesh [mm]

M2331 33 x 11 33 x 11

CLAMP B10

Safety clamp A
Consisting of safety top clip, lower bottom clamp,
hexagon bolt and square nut.

Galvanised V2A
Designation mesh [mm] mesh [mm]

M0731 34 x 38 34 x 38

SAFETY CLAMP A

The illustrations are not assembly instructions.

28 F I X I N G S Y S T E M S

Safety clamp D
Consisting of safety top clip, lower bottom clamp, he-
xagon bolt and square nut.

Galvanised V2A
Designation mesh [mm] mesh [mm]

M0833 34 x 38 34 x 38

SAFETY CLAMP D

Welded-in holed fixing plates

Consisting of welded-in holed plates according to cu-

stomer‘s specifications; bolts are provided by the cu-
stomer. The design and position of the welded in plate
depend on the load to which the grating is subjected
and the fastening possibilities available on site.

F a s t e n i n g t e c h n i q u e f o r M e i s e r To p p l a t e

Consisting of head bolts and a flat head bolt with pres-

sed long nut.

Illustrations are not assembly instructions.

 F I X I N G S Y S T E M S 29

Fastening technique Drainstep RH3 &

Stepbloc F
Consisting of fired studs, cap T03 and a countersunk
bolt with pressed long nut.

Fastening technique for closed and

perforated surfaces
Consisting of fired studs and a flat head bolt with pres-
sed long nut as well as a bore diameter 13 mm in the
profile surface.

Bolted connection
Consisting of one M8 x 20 hexagon bolt with washers
and self-locking nut.

Plug-in system
Consisting of a punched-out steel ridge which creates a
connection with the opposite side perforation in the ad-
jacent profile and thus makes it possible to compensate
for the deflection of the individual profiles.

Illustrations are not assembly instructions.

STAIR TREADS
INDUSTRIE-SYSTEMGELÄNDER
32 P R E S S L O C K E D G R A T I N G T R E A D S

Press locked grating treads

Press locked grating treads can be produced from mild
steel, highgrade steel and aluminium. They are pro-
duced in accordance with the same principle as for
press locked grating. It is possible to provide these
stair treads with anti-skid-properties up to R12 by in-
cluding special notches on the bearing bars and cross
bars. Even very large tread widths can be produced by
designing the bearing bars in the same way as heavy
duty grating. Thus it is possible for even extreme loads
to be reliably absorbed.

Press welded grating treads

Press welded grating treads can be produced from mild
steel and high-grade steel. Here too, production is ba-
sed on the process used for the manufacture of press
welded grating. It is possible to provide this tread de-
sign with anti-skid-properties up to R13.

„B“
Width B Stair treads Hole distance A

240 mm 120 mm
55
70
270 mm 150 mm

305 mm 180 mm 14

15
„A“
35

H O L E PAT T E R N
 P R O F I L E P L A N K I N G S T A I R T R E A D S 33

Profile plank stair treads

MEISER profile plank stair treads can be made using
any profile plank. In punched surfaces, the first row
of perforations is placed directly on the edge to form
safety edging.

Alternatively, we can also attach a flat bar with anti-slip

notches on request. The side plates are either bent or
welded on and are made according to our standard
drilling patterns 1 or 2.

On request we can also provide you with special dril-

ling patterns. Important criteria for the selection of the
right stair treads are the required load and the purpose
of use. We will be happy to advise you on this in order
B
to find the optimum solution for you. Safety nosing

30
55
70

3
Ø1

13
Width B Stair treads Hole distance A 35 A
15

240 mm 120 mm H O L E PAT T E R N 1

270 mm 150 mm
Safety nosing
300 mm 180 mm B

3 30
27

Ø1
42

13

52,5

H O L E PAT T E R N 2

Pressed chequered plate stair

treads
Although the lighter and therefore cheaper profile planks
are becoming more and more popular for use as a
closed stair tread, there is however still a demand for
traditional stair treads made from chequer plate. MEI-
SER can produce any variation for you, whether with
integrated kickplate protection or side plates for bolting.
34 S E R V I C E

Service

For MEISER, service means offering its customers and partners

the highest possible added value by providing high-quality pro-
ducts at a reasonable price and on schedule.
The special attraction for us is also to solve unusual tasks. We
do not want to reduce your ideas to our capabilities, but rather
to expand our capabilities with new solutions. Therefore, new
tasks are not only a technical challenge for us, but also an
opportunity to improve and develop ourselves as a company.

Challenge us!
Planning/Manufacturing

Our offers to you include planning, production and the creation

of installation plans, all from one source. Constant new and
further development of products for a wide range of applica-
tions enable us to meet all your requirements.

Service is our top priority. This means for you:

- Advice on design, standards and regulations

- Preparation of assembly and manufacturing drawings
- Development of customer-specific special solutions

Quality assurance is a standard for us. Where required, the

constructions comply with the current DIN / EN standards,
the requirements of accident prevention regulations and any
professional associations.

Further information on load tables and an overview of slip re-

sistance can be found on our website.
 C O N T A C T 35

Contact

In order to be fully aware of your needs and wishes MEISER relies on an old but proven sales strategy: per-
sonal support. Reliable contacts who will advise you with experience and expertise, show you solutions and
also stand by your side immediately if things do not go smoothly.

We believe this is the only way to ensure that your needs are met. We will not leave this path, because it is the
path of quality and reliability that begins with the products and does not end with customer care.

Our team will be happy to assist you.

Gebr. MEISER GmbH MEISER Vogtland OHG

Edmund Meiser Straße 1 Am Lehmteich 3
D-66839 Schmelz-Limbach D-08606 Oelsnitz

Tel +49 (0) 68 87 - 309 0 Tel +49 (0) 37 421 - 50 0

Fax +49 (0) 68 87 - 309 3000 Fax +49 (0) 37 421 - 50 2120

E-Mail info@meiser.de E-Mail info@meiser.de

All contact persons can be found on our homepage at www.meiser.de

Imprint
Design, concept, technical illustration and
Lithography: MEISER
Photography: Tom Gundelwein, MEISER
Technical development reserved.
We exclude any liability for any errors or mistakes.

500 / 09.2019