Mini contactor relays,

contactor relay, contactors

Continual operation requires high operational reliability in the components used. The
DILM contactor achieves the best lifespan values in AC-3 applications and is ideal for
heavy AC-4 jogging.

Mini contactor relay DILE…,contactor relays, contactors up to 12 A AC-3 at 400 V

Compact dimensions for the highest packing densities +++ Extended performance range up to
5.5 kW at 400 V
AC and DC contactor system DILM…, contactor relays, 3 pole contactors up to 170 A AC-3
at 400 V, 4 pole contactors up to 200 A AC-1
Easier engineering through identical construction sizes for AC- and DC-operated contactors +++
Energy savings and higher packing density in control panel due to minimized heat dissipation
+++ High wiring security through doubled box terminals +++ Less coupler relays: direct
actuation from the PLC for contactors up to 32 A +++ Easy engineering through integrated
suppressor circuits for DC +++ Uniform accessories for 3- and 4-pole contactors +++
Mechanical interlock double conductor run mountable without additional separation gap +++
Direct fieldbus connection through the communication system SmartWire-Darwin, through
plug-in type protective module

Eaton After Sales Service

High rated contactors - contactors up to 1600 A AC-3 at 400 V, contactors up to 2600 A
AC-1
Testing switching devices in
compliance with regulations Compact dimensions with high switching power +++ Direct actuation from the PLC saves
applicable to this technology coupler relays +++ Easy engineering through wide range coils +++ Cost and energy savings for
￫ Chapter 22 control panel ventilation due to reduced heat dissipation +++ Long lifespan through vacuum
technology from 580 A
SmartWire-Darwin
The DIL product range offers contact elements which can be connected to the SmartWire-
Darwin communication system. ￫ Protective modules, Page 5/62
2010 CA08103002Z-EN   www.eaton.com
5/18 Contactors Contactors 5/19
Basic devices up to 170 A Basic devices up to 170 A
DILM HPL05018EN HPL05019EN DILM
Basic devices up to 170 A

AC operation DC operation
Rated operational Max. motor rating for Conventional thermal Contact configuration Circuit symbol Can be combined Part no. Price Part no. Price Std. pack Notes
current three-phase motors 50 - 60 Hz current I Ith = Ie AC-1 with auxiliary Article no. See Article no. See
at 60 °C contact price list price list

AC-3 AC-3 AC-4 N/O = normally open

380 V 220 V 380 V 660 V 220 V 380 V 660 V Open contact
400 V 230 V 400 V 690 V 230 V 400 V 690 V NC = normally closed
contact

Ie P P P P P P Ith = Ie
A kW kW kW kW kW kW A

Basic device
Screw terminals
3 pole
7 2.2 3 3.5 1 2.2 2.9 20 1 N/O – A1 1 3 5 13 DILM32-XHI.. DILM7-10(230V50HZ) DILM7-10(24VDC) 1 off Contacts to EN 50 012.
DILA-XHI(V).. 276550 276565 For all DC operated contactors DILM7 - DILM15 the following
A2 2 4 6 14
applies:
7 2.2 3 3.5 1 2.2 2.9 20 – 1 NC A1 1 3 5 21 DILA-XHI(V).. DILM7-01(230V50HZ) DILM7-01(24VDC) • Integrated varistor-suppressor circuit.
276585 276600 For DC operated contactors DILM17 - DILM170 the following
A2 2 4 6 22
applies:
9 2.5 4 4.5 1.5 2.5 3.6 20 1 N/O – A1 1 3 5 13 DILM32-XHI.. DILM9-10(230V50HZ) DILM9-10(24VDC) • Integrated suppressor circuit in actuating electronics
DILA-XHI(V).. 276690 276705 For AC operated contactors DILM115 - DILM170 the following
A2 2 4 6 14
applies:
9 2.5 4 4.5 1.5 2.5 3.6 20 – 1 NC A1 1 3 5 21 DILA-XHI(V).. DILM9-01(230V50HZ) DILM9-01(24VDC) • Integrated suppressor circuit in actuating electronics
276725 276740 For DILM7-01 – DILM38-01 the following applies:
A2 2 4 6 22
• With mirror contact.
12 3.5 5.5 6.5 2 3 4.4 20 1 N/O – A1 1 3 5 13 DILM32-XHI.. DILM12-10(230V50HZ) DILM12-10(24VDC)
DILA-XHI(V).. 276830 276845 1) Electrical lifespan ￫ 5/91
A2 2 4 6 14

12 3.5 5.5 6.5 2 3 4.4 20 – 1 NC A1 1 3 5 21 DILA-XHI(V).. DILM12-01(230V50HZ) DILM12-01(24VDC)

276865 276880
A2 2 4 6 22

15.5 4 7.5 7 2 3 4.4 20 1 N/O – A1 1 3 5 13 DILM32-XHI.. DILM15-10(230V50HZ)1) DILM15-10(24VDC)1)

DILA-XHI(V).. 290058 290073
A2 2 4 6 14

15.5 4 7.5 7 2 3 4.4 20 – 1 NC A1 1 3 5 21 DILA-XHI(V).. DILM15-01(230V50HZ)1) DILM15-01(24VDC)1)

290093 290108
A2 2 4 6 22

18 5 7.5 11 2.5 4.5 6.5 35 1 N/O – A1 1 3 5 13 DILM32-XHI.. DILM17-10(230V50HZ) DILM17-10(RDC24)

DILA-XHI(V).. 277004 277018
A2 2 4 6 14
DILM32-XHI11-S
18 5 7.5 11 2.5 4.5 6.5 35 – 1 NC A1 1 3 5 21 DILA-XHI(V).. DILM17-01(230V50HZ) DILM17-01(RDC24)
DILM32-XHI11-S 277036 277050 3
A2 2 4 6 22

25 7.5 11 14 3.5 6 8.5 40 1 N/O – A1 1 3 5 13 DILM32-XHI.. DILM25-10(230V50HZ) DILM25-10(RDC24)

DILA-XHI(V).. 277132 277146
A2 2 4 6 14
DILM32-XHI11-S
25 7.5 11 14 3.5 6 8.5 40 – 1 NC A1 1 3 5 21 DILA-XHI(V).. DILM25-01(230V50HZ) DILM25-01(RDC24)
DILM32-XHI11-S 277164 277178 2 1
A2 2 4 6 22

32 10 15 17 4 7 10 40 1 N/O – A1 1 3 5 13 DILM32-XHI.. DILM32-10(230V50HZ) DILM32-10(RDC24)

DILA-XHI(V).. 277260 277274
A2 2 4 6 14
DILM32-XHI11-S Accessories Page
32 10 15 17 4 7 10 40 – 1 NC A1 1 3 5 21 DILA-XHI(V).. DILM32-01(230V50HZ) DILM32-01(RDC24) 1 Overload relay ￫ Chapter 6
DILM32-XHI11-S 277292 277306 2 Suppressor ￫ 5/54
A2 2 4 6 22

38 11 18.5 21 4 7 10 40 1 N/O – A1 1 3 5 13 DILM32-XHI.. DILM38-10(230V50HZ)1) DILM38-10(RDC24)1) 3 Auxiliary contact module ￫ 5/38

DILA-XHI(V).. 112428 112442 Further actuating voltages ￫ 5/73
A2 2 4 6 14
DILM32-XHI11-S Accessories ￫ 5/56
38 11 18.5 21 4 7 10 40 – 1 NC A1 1 3 5 21 DILA-XHI(V).. DILM38-01(230V50HZ)1) DILM38-01(RDC24)1)
DILM32-XHI11-S 112456 112470
A2 2 4 6 22

Information relevant for export to North America

Product Standards IEC/EN 60947-4-1; UL 508; CSA-C22.2 No. 14-05; CE marking

UL File No. E29096
UL CCN NLDX
CSA File No. 012528
CSA Class No. 2411-03, 3211-04
NA Certification UL Listed,
CSA certified
See also ￫ Page 5/84

2010 CA08103002Z-EN www.eaton.com 2010 CA08103002Z-EN www.eaton.com

5/20 Contactors Contactors 5/21
Basic devices up to 170 A Basic devices up to 170 A
DILM HPL05020EN HPL05021EN DILM

AC operation DC operation
Rated operational Max. motor rating for Conventional thermal Contact configuration Circuit symbol Can be combined Part no. Price Part no. Price Std. pack Notes
current three-phase motors 50 - 60 Hz current I Ith = Ie AC-1 with auxiliary Article no. See Article no. See
at 60 °C contact price list price list

AC-3 AC-3 AC-4 N/O = normally open

380 V 220 V 380 V 660 V 220 V 380 V 660 V Open contact
400 V 230 V 400 V 690 V 230 V 400 V 690 V NC = normally closed
contact

Ie P P P P P P Ith = Ie
A kW kW kW kW kW kW A

Basic device
Screw terminals
3 pole
40 12.5 18.5 23 5 9 12 50 – – A1 1 3 5 DILM150-XHI(V).. DILM40(230V50HZ) DILM40(RDC24) 1 off Contacts to EN 50012.
DILM1000- 277766 277780 For all DC operated contactors DILM7 - DILM15 the following
A2 2 4 6
XHI(V).. applies:
50 15.5 22 30 6 10 14 65 – – A1 1 3 5 DILM150-XHI(V).. DILM50(230V50HZ) DILM50(RDC24) • Integrated varistor-suppressor circuit.
DILM1000- 277830 277844 For DC operated contactors DILM17 - DILM170 the following
A2 2 4 6
XHI(V).. applies:
• Integrated suppressor circuit in actuating electronics
65 20 30 35 7 12 17 80 – – A1 1 3 5 DILM150-XHI(V).. DILM65(230V50HZ DILM65(RDC24) For AC operated contactors DILM115 - DILM170 the following
DILM1000- 277894 277908 applies:
A2 2 4 6
XHI(V).. • Integrated suppressor circuit in actuating electronics
72 25 37 35 7 12 17 80 – – A1 1 3 5 DILM150-XHI(V).. DILM72(230V50HZ)1) DILM72(RDC24)1) For DILM7-01 – DILM38-01 the following applies:
DILM1000- 107670 107671 • With mirror contact.
A2 2 4 6
XHI(V)..
1) Electrical lifespan ￫ 5/91
80 25 37 63 12 20 26 90 – – A1 1 3 5 DILM150-XHI(V).. DILM80(230V50HZ) DILM80(RDC24)
DILM1000- 239402 239416
A2 4 6
2
XHI(V)..
95 30 45 75 16 26 35 110 – – A1 1 3 5 DILM150-XHI(V).. DILM95(230V50HZ) DILM95(RDC24)
DILM1000- 239480 239510
A2 2 4 6
XHI(V)..
115 37 55 90 17 28 43 130 – – A1 1 3 5 DILM150-XHI(V).. DILM115(RAC240) DILM115(RDC24)
DILM1000- 239548 239555
A2 2 4 6
XHI(V)..
150 48 75 96 20 33 48 160 – – A1 1 3 5 DILM150-XHI(V).. DILM150(RAC240) DILM150(RDC24)
DILM1000- 239588 239591
A2 4 6
2
XHI(V)..
170 52 90 140 20 33 48 185 – – A1 1 3 5 DILM150-XHI(V).. DILM170(RAC240)1) DILM170(RDC24)1)
DILM1000- 107013 107016
A2 2 4 6
XHI(V).. 3

2 1

Accessories Page
1 Overload relay ￫ Chapter 6
2 Suppressor ￫ 5/54
3 Auxiliary contact module ￫ 5/38
Further actuating voltages ￫ 5/75
Accessories ￫ 5/56

Information relevant for export to North America

Product Standards IEC/EN 60947-4-1; UL 508; CSA-C22.2 No. 14-05; CE marking

UL File No. E29096
UL CCN NLDX
CSA File No. 012528
CSA Class No. 2411-03, 3211-04
NA Certification UL Listed,
CSA certified
See also ￫ Page 5/84

2010 CA08103002Z-EN www.eaton.com 2010 CA08103002Z-EN www.eaton.com

5/26 Contactors Contactors 5/27
Complete device up to 170 A Complete device up to 170 A
DILM HPL05026EN HPL05027EN DILM

AC operation DC operation
Rated opera- Max. motor rating for Conventional Contact Circuit symbol Part no. Price Part no. Price Std. pack Notes
tional current three-phase motors 50 - 60 Hz free air Article no. See Article no. See
AC-3 AC-3 AC-4 thermal Contact configuration: price list price list
current Ith = Ie  = Safety function by
380 V 220 V 380 V 660 V 220 V 380 V 660 V AC-1 at 60 °C
400 V 230 V 400 V 690 V 230 V 400 V 690 V positive opening according
to IEC/EN 60947‐5‐1
Open
Ie P P P P P P Ith = Ie N/O = normally NC = normally
open contact closed contact
A kW kW kW kW kW kW A

DILM complete device

Screw terminals
40 12.5 18.5 23 5 9 12 50 2 N/O 2 NC A1 1 3 5 13 21 31 43 DILM40-22(230V50HZ) DILM40-22(RDC24) 1 off
277798 277812
A2 2 4 6 14 22 32 44

50 15.5 22 30 6 10 14 65 2 N/O 2 NC A1 1 3 5 13 21 31 43 DILM50-22(230V50HZ) DILM50-22(RDC24)

277862 277876
A2 2 4 6 14 22 32 44

65 20 30 35 7 12 17 80 2 N/O 2 NC A1 1 3 5 13 21 31 43 DILM65-22(230V50HZ) DILM65-22(RDC24)

277926 277940
A2 2 4 6 14 22 32 44

80 25 37 63 12 20 26 90 2 N/O 2 NC A1 1 3 5 13 21 31 43 DILM80-22(230V50HZ) DILM80-22(RDC24)

239449 239463
A2 2 4 6 14 22 32 44

95 30 45 75 16 26 35 110 2 N/O 2 NC DILM95-22(230V50HZ) DILM95-22(RDC24) 1

A1 1 3 5 13 21 31 43 2
239527 239541
A2 2 4 6 14 22 32 44

115 37 55 90 17 28 43 130 2 N/O 2 NC A1 1 3 5 13 21 31 43 DILM115-22(RAC240) DILM115-22(RDC24) Accessories Page

239578 239581 1 Overload relay ￫ Chapter 6
A2 2 4 6 14 22 32 44

150 48 75 96 20 34 48 160 2 N/O 2 NC DILM150-22(RAC240) DILM150-22(RDC24) 2 Suppressor ￫ 5/54

A1 1 3 5 13 21 31 43

239598 239601 Accessories ￫ 5/56

A2 2 4 6 14 22 32 44

For DC operated contactors DILM17 - DILM170 the following applies:

• Integrated suppressor circuit in actuating electronics
For AC operated contactors DILM115 - DILM170 the following applies:
• Integrated suppressor circuit in actuating electronics
For DILM7 - DILM150 the following applies:
• With mirror contact.
Contacts to EN 50012

Information relevant for export to North America

Product Standards IEC/EN 60947-4-1; UL 508; CSA-C22.2 No. 14-05;

CE marking
UL File No. E29096
UL CCN NLDX
CSA File No. 012528
CSA Class No. 2411-03, 3211-04
NA Certification UL Listed, CSA certified
See also ￫ Page 5/84

2010 CA08103002Z-EN www.eaton.com 2010 CA08103002Z-EN www.eaton.com

5/32 Contactors DILM, DILH Contactors DILM, DILH 5/33
Comfort devices greater than 150 A Comfort devices greater than 150 A
DILM, DILH HPL05032EN HPL05033EN DILM...-S/22...
Comfort devices greater than 150 A

Rated Max. motor rating for Conventional Circuit symbol Part no. Price Std. pack Notes
operational three-phase motors 50 - 60 Hz thermal See price
current current Ith = Ie list
AC-1 at 60 °C
AC-3 AC-3 AC-4 Open
380 V 220 V 380 V 660 V 1000 V 220 V 380 V 660 V 1000 V Ith = Ie
400 V 230 V 400 V 690 V 230 V 400 V 690 V
Ie P P P P P P P P A
A kW kW kW kW kW kW kW kW

Contactors, comfort DILM

185 55 90 140 108 41 75 102 77 275 A1 1 3 5 13 21 31 43 DILM185A/22(RAC240)1) 1 off
139537 Conventional DILM 185 A, DILM 225 A DILM250 to DILM1000, DILH1400 DILM1600 to DILH 2600
A2 2 4 6 14 22 32 44
225 70 110 150 108 51 90 110 77 315 DILM225A/22(RAC240)1) A1/A2 are attached (+) L1 (+) L1 (+) L1
139547 to power supply as (–) N (–) N (–) N
normal
a a a
A2 A10 A2 A10 A2

A1 A11 A1 A11 A1

250 75 132 195 108 62 110 160 109 330 A1 1 3 5 13 21 31 43 DILM250/22(RA250)2) A3 TY A3

208201 A4 TX A4

A2 2 4 6 14 22 32 44
300 90 160 195 132 75 132 160 109 350 DILM300A/22(RA250)1) 2)
139556 Directly from the PLC
A 24 V output from (+) L1 (+) L1
the PLC can be (–) N
directly connected (–) N
to the terminals A4/ a
A24. a A10 A2
400 125 200 344 132 92 160 283 132 500 DILM400/22(RA250)3) A10 A2
A11 A1
208209 A11 A1

500 155 250 344 132 112 200 344 132 700 DILM500/22(RA250)3) TY A3

208213 A3 TX A4

A4

24 V
24 V GND
GND
From a low-power command device
580 185 315 560 600 143 250 440 509 800 DILM580/22(RA250)3)
208216 Low-power (+) L1 (+) L1
actuating devices (–) N (–) N
650 205 355 630 600 161 280 494 509 850 DILM650/22(RA250)3) such as PCB relays,
208219 pilot devices or a a
750 240 400 720 800 181 315 556 678 900 DILM750/22(RA250)3) position switches A10 A2 A10 A2
can be directly b b
208222 A11 A1 A11 A1
connected to A10/
820 260 450 750 800 209 355 633 678 1000 DILM820/22(RA250)3) A11. A3 TY A3
208225 A4 TX A4

1000 315 560 1000 1100 260 450 780 1000 1000 DILM1000/22(RA250)3)
267214
1600 500 900 1600 1770 430 750 1300 1650 1800 A1 1 3 5 13 21 31 43 DILM1600/22(RAW250)3) ① Stopping in the event of an emergency (emergency switching off)
106727 ② Max. cable capacitance 6 nF
A2 2 4 6 14 22 32 44

Notes 1) Availability from August 2010. Information relevant for export to North America
Previous DILM185/22 to DILM300/22, see Online Catalog at http://ecat.moeller.net

For all contactors the following applies: 1)

• 660 V, 690 V or 1000 V: do not reverse directly NA Certification Request filed for UL and CSA
• Integrated suppressor circuit in actuating electronics.
2)
When operating contactors DILM580 to DILM1600 behind a frequency inverter or mains with Product Standards IEC/EN 60947-4-1; UL 508; CSA-C22.2 No. 14-05; CE marking
strong harmonic loads, the suppressor circuit on the load side must be removed. UL File No. E29096
During high-voltage tests, the suppressor circuit on the load-side for DILM580 to DILH2600 contactors UL CCN NLDX
must be disconnected (see instructional leaflet). CSA File No. 1017510
Control voltages CSA Class No. 3211-04
RA250 ≙ 110 V - 250 V AC/DC NA Certification UL Listed, CSA certified
RAW250 ≙ 230 V - 250 V AC/DC 3)
Product Standards IEC/EN 60947-4-1; UL 508; CSA-C22.2 No. 14-05; CE marking
Accessories Page UL File No. E29096
Auxiliary contact modules ￫ 5/40 UL CCN NLDX
CSA File No. 012528
Suppressor circuits on load side ￫ 5/65
CSA Class No. 3211-04
Enclosures NA Certification UL Listed, CSA certified
Further actuating voltages ￫ 5/76 See also Additional approvals ￫ Page 5/86

2010 CA08103002Z-EN www.eaton.com 2010 CA08103002Z-EN www.eaton.com