Unpacking

Thank you for buying the MSI® H270M BAZOOKA/ B250M BAZOOKA motherboard.
Check to make sure your motherboard box contains the following items. If something
is missing, contact your dealer as soon as possible.

Drivers & Utilities

Disc Motherboard User
Motherboard Guide

I/O Shield

SATA Cable x2

Unpacking 1
 Safety Information
y The components included in this package are prone to damage from electrostatic
discharge (ESD). Please adhere to the following instructions to ensure successful
computer assembly.
y Ensure that all components are securely connected. Loose connections may cause
the computer to not recognize a component or fail to start.
y Hold the motherboard by the edges to avoid touching sensitive components.
y It is recommended to wear an electrostatic discharge (ESD) wrist strap when
handling the motherboard to prevent electrostatic damage. If an ESD wrist strap
is not available, discharge yourself of static electricity by touching another metal
object before handling the motherboard.
y Store the motherboard in an electrostatic shielding container or on an anti-static
pad whenever the motherboard is not installed.
y Before turning on the computer, ensure that there are no loose screws or metal
components on the motherboard or anywhere within the computer case.
y Do not boot the computer before installation is completed. This could cause
permanent damage to the components as well as injury to the user.
y If you need help during any installation step, please consult a certified computer
technician.
y Always turn off the power supply and unplug the power cord from the power outlet
before installing or removing any computer component.
y Keep this user guide for future reference.
y Keep this motherboard away from humidity.
y Make sure that your electrical outlet provides the same voltage as is indicated on
the PSU, before connecting the PSU to the electrical outlet.
y Place the power cord such a way that people can not step on it. Do not place
anything over the power cord.
y All cautions and warnings on the motherboard should be noted.
y If any of the following situations arises, get the motherboard checked by service
personnel:
ƒ Liquid has penetrated into the computer.
ƒ The motherboard has been exposed to moisture.
ƒ The motherboard does not work well or you can not get it work according to user
guide.
ƒ The motherboard has been dropped and damaged.
ƒ The motherboard has obvious sign of breakage.
y Do not leave this motherboard in an environment above 60°C (140°F), it may damage
the motherboard.

2 Safety Information
Quick Start
Preparing Tools and Components

Intel® LGA 1151 CPU CPU Fan Thermal Paste

DDR4 Memory
Power Supply Unit

Chassis

SATA DVD Drive SATA Hard Disk Drive Graphics Card

Phillips Screwdriver A Package of Screws

Quick Start 3
 Installing a Processor
2

http://youtu.be/bf5La099urI 1

7
4 5 9
6

4 Quick Start
Installing DDR4 memory

http://youtu.be/T03aDrJPyQs

3
2

DIMMB2 DIMMB2
DIMMB1
DIMMA2 DIMMA2 DIMMA2
DIMMA1

Quick Start 5
 Connecting the Front Panel Header

http://youtu.be/DPELIdVNZUI

-
ED
RL
WE
D+ PO
LE
ER W
ED PO
DL
SW

HD
R
WE
PO
W
TS
SE
RE

RESET SW
HDD LED

1 HDD LED + 2 Power LED +

2 10
3 HDD LED - 4 Power LED -

5 Reset Switch 6 Power Switch

1 9
7 Reset Switch 8 Power Switch
JFP1
9 Reserved 10 No Pin

JFP1

HDD LED -
HDD LED
HDD LED +

POWER LED -
POWER LED
POWER LED +

6 Quick Start
Installing the Motherboard

Quick Start 7
 Installing SATA Drives

http://youtu.be/RZsMpqxythc
1

2
3

8 Quick Start
Installing a Graphics Card

http://youtu.be/mG0GZpr9w_A

Quick Start 9
 Connecting Peripheral Devices

10 Quick Start
Connecting the Power Connectors

http://youtu.be/gkDYyR_83I4

ATX_PWR1 CPU_PWR1

Quick Start 11
 Power On

12 Quick Start
Contents
Unpacking .............................................................................................................. 1
Safety Information ................................................................................................. 2
Quick Start ............................................................................................................. 3
Preparing Tools and Components .......................................................................... 3
Installing a Processor ............................................................................................. 4
Installing DDR4 memory ........................................................................................ 5
Connecting the Front Panel Header ....................................................................... 6
Installing the Motherboard ..................................................................................... 7
Installing SATA Drives............................................................................................. 8
Installing a Graphics Card ...................................................................................... 9
Connecting Peripheral Devices ............................................................................ 10
Connecting the Power Connectors....................................................................... 11
Power On............................................................................................................... 12

Specifications....................................................................................................... 15
Block Diagram .................................................................................................... 19
Rear I/O Panel ..................................................................................................... 20
LAN Port LED Status Table................................................................................... 20
Realtek HD Audio Manager .................................................................................. 20

Overview of Components .................................................................................... 22

CPU Socket ........................................................................................................... 24
DIMM Slots............................................................................................................ 25
PCI_E1~3: PCIe Expansion Slots .......................................................................... 26
SATA1~6: SATA 6Gb/s Connectors ....................................................................... 26
M2_1: M.2 Slot (Key M) ......................................................................................... 27
JFP1, JFP2: Front Panel Connectors ................................................................... 28
JAUD1: Front Audio Connector ............................................................................ 28
JCOM1: Serial Port Connector ............................................................................. 28
CPU_PWR1, ATX_PWR1: Power Connectors ....................................................... 29
JUSB2~3: USB 2.0 Connectors ............................................................................. 30
JUSB1: USB 3.1 Gen1 Connectors ....................................................................... 30
CPU_FAN1~2,SYS_FAN1~4: Fan Connectors ....................................................... 31
JCI1: Chassis Intrusion Connector ....................................................................... 32
JTPM1: TPM Module Connector ........................................................................... 32
JLED1: RGB LED connector ................................................................................. 33
JLPT1: Parallel Port Connector ........................................................................... 33
JBAT1: Clear CMOS (Reset BIOS) Jumper ........................................................... 34

Contents 13
 EZ Debug LED ....................................................................................................... 34

BIOS Setup ........................................................................................................... 35

Entering BIOS Setup ............................................................................................. 35
Resetting BIOS...................................................................................................... 36
Updating BIOS....................................................................................................... 36
System Status Menu ............................................................................................. 37
Advanced Menu..................................................................................................... 38
Overclocking Menu ............................................................................................... 45
M-Flash Menu....................................................................................................... 51
Security Menu ....................................................................................................... 52
Boot Menu ............................................................................................................. 54
Save & Exit Menu .................................................................................................. 55

Software Description........................................................................................... 56
Installing Windows® 7/ 8.1/ 10.............................................................................. 56
Installing Drivers .................................................................................................. 56
Installing Utilities ................................................................................................. 56
COMMAND CENTER ............................................................................................. 57
LIVE UPDATE 6...................................................................................................... 61
GAMING APP ......................................................................................................... 63
RAMDISK............................................................................................................... 67
GAMING LAN MANAGER ...................................................................................... 68
DRAGON EYE ........................................................................................................ 70
Intel® Extreme Tuning Utility ................................................................................ 71
SteelSeries Engine 3 ............................................................................................ 72
CPU-Z.................................................................................................................... 74

RAID Configuration (optional) ............................................................................. 75

Using Intel® Rapid Storage Technology Option ROM ........................................... 75
Degraded RAID Array ........................................................................................... 78

Troubleshooting .................................................................................................. 80
Regulatory Notices .............................................................................................. 81

14 Contents
Specifications
Supports 6th/7th Gen Intel® Core™ i3/i5/i7 processors,
CPU and Intel® Pentium® and Celeron® processors for Socket
LGA1151
Chipset Intel® H270/ B250 Chipset
y 4x DDR4 memory slots, support up to 64GB
ƒ 7th Gen processors support DDR4 2400/ 2133 MHz*
ƒ 6th Gen processors support DDR4 2133 MHz*
Memory y Dual channel memory architecture
y Supports Intel® Extreme Memory Profile (XMP)**
* Please refer www.msi.com for more information on compatible memory.
** DDR4 memory modules can only run at maximum of 2400 MHz for 7th Gen
processors and 2133 MHz for 6th Gen processors on XMP mode.

y 1x PCIe 3.0 x16 slot (supports x16 mode)

Expansion Slots
y 2x PCIe 3.0 x1 slots
y 1x HDMI ™ port, supports a maximum resolution of
4096x2160@24Hz, 2560x1600@60Hz
Onboard Graphics
y 1x DVI-D port, supports a maximum resolution of
1920x1200@60Hz
Intel® H270/ B250 Chipset
y 6x SATA 6Gb/s ports
y 1x M.2 slot (Key M)*
ƒ Supports up to PCIe 3.0 x4 and SATA 6Gb/s
Storage ƒ Supports 2242/ 2260 /2280 storage devices
ƒ Intel® Optane ™ Memory Ready
y H270 supports RAID 0, RAID1, RAID 5 and RAID 10 for
SATA storage devices
* The SATA1 port will be unavailable when an M.2 SATA SSD module has been
installed in the M.2 slot.

Intel® H270/ B250 Chipset

y 6x USB 3.1 Gen1 (SuperSpeed USB) ports (3 Type-A & 1
Type-C ports on the back panel, 2 ports available through
USB the internal USB connector)
y 6x USB 2.0 (High-speed USB) ports (2 ports on the
back panel, 4 ports available through the internal USB
connector)
y Realtek® ALC887 Codec
Audio
y 7.1-Channel High Definition Audio

LAN 1x Realtek® 8111H Gigabit LAN controller

Continued on next page

Specifications 15
 Continued from previous page

y 1x PS/2 keyboard port

y 1x PS/2 mouse port
y 1x HDMI ™ port
y 1x DVI-D port
Back Panel
y 1x LAN (RJ45) port
Connectors
y 2x USB 2.0 Type-A ports
y 3x USB 3.1 Gen1 Type-A ports
y 1x USB 3.1 Gen1 Type-C port
y 3x audio jacks
y 1x 24-pin ATX main power connector
y 1x 8-pin ATX 12V power connector
y 6x SATA 6Gb/s connectors
y 2x USB 2.0 connectors (supports additional 4 USB 2.0
ports)
y 1x USB 3.1 Gen1 connector (supports additional 2 USB 3.1
Gen1 ports)
y 1x 4-pin CPU fan connector
y 2x 4-pin system fan connectors
Internal Connectors y 1x Front panel audio connector
y 2x Front panel connectors
y 1x TPM module connector
y 1x Chassis Intrusion connector
y 1x Serial port connector
y 1x Parallel port connector
y 1x RGB LED connecotr
y 1x TBT connector
y 1x Clear CMOS jumper

I/O Controller NUVOTON NCT6795 Controller Chip

y CPU/System temperature detection
Hardware Monitor y CPU/System fan speed detection
y CPU/System fan speed control
y ATX Form Factor
Form Factor
y 9.6 in. x 9.0 in. (24.4 cm x 22.8 cm)
Continued on next page

16 Specifications
 Continued from previous page

y 1x 64 Mb flash
y UEFI AMI BIOS
BIOS Features
y ACPI 5.0, PnP 1.0a, SM BIOS 2.8
y Multi-language
y Drivers
y COMMAND CENTER
y LIVE UPDATE 6
y FAST BOOT
y SUPER CHARGER
y GAMING APP
y RAMDISK
y GAMING LAN MANAGER
Software
y X-BOOST
y MSI SMART TOOL
y Intel® Extreme Tuning Utility
y Norton™ Internet Security Solution
y Google Chrome™ ,Google Toolbar, Google Drive
y SteelSeries Engine 3
y CPU-Z MSI GAMING
y DRAGON EYE
y GAMING LAN
ƒ GAMING Network Manager power by cFos
y GAMING APP
ƒ Gaming Hotkey
ƒ Gaming Mouse Control
Arsenal GAMING y GAMING CERTIFIED
Features
y WTFast GPN*
ƒ 2-Month Premium License
ƒ Multi-Server Network Optimization
ƒ Advanced Lag Spike & Disconnect Reduction
* This offer is valid for a limited period only, for more information please visit
www.msi.com

Continued on next page

Specifications 17
 Continued from previous page

y CLICK BIOS
y MILITARY CLASS 5
ƒ Military Class Component
ƒ Military Class Stability and Reliability
˜ ESD Protection
˜ EMI Protection
˜ Humidity Protection
˜ Circuit Protection
MSI Exclusive
˜ High Temperature Protection
Features
˜ VGA Armor PCIe Slots
y COMMAND CENTER
ƒ System Monitor
ƒ Smart Fan Control
y RAMDISK
y LIVE UPDATE 6
y GAMING DNA
y CPU-Z
y PCI Express 3.0 Support
Specification
y SATA Express Support
Highlights
y NVMe / AHCI Driver Support

18 Specifications
Block Diagram

HDMI DVI-D

Dual Channel DDR4 Memory

CPU

PCI Express Bus

DMI 3.0

M.2

Switch
PCI Express Bus

x1
PCIe x1 slot
SATA 6Gb/s
x1
PCIe x1 slot
B250/ H270

USB 3.1 Gen1

PCI slot

USB 2.0

LPC Bus

NV6795 Realtek
Super I/O ALC887

P/S2 Mouse / Keyboard Audio Jacks

Block Diagram 19
 Rear I/O Panel
USB 3.1
Gen1 Line-out
Line-in
LAN Type-A
PS/2 Mouse USB 3.1
Gen1
Type-A

PS/2 Keyboard DVI-D USB 2.0 USB 3.1 Mic in

Gen1
Type-C

LAN Port LED Status Table

Link/ Activity LED Speed LED
Status Description Status Description

Off No link Off 10 Mbps connection

Yellow Linked Green 100 Mbps connection

Blinking Data activity Orange 1 Gbps connection

Realtek HD Audio Manager

After installing the Realtek HD Audio driver, the Realtek HD Audio Manager icon will
appear in the system tray. Double click on the icon to launch.

Device
Selection Advanced
Settings

Jack Status
Application
Enhancement

Main Volume
Connector
Strings
Profiles

20 Rear I/O Panel

y Device Selection - allows you to select a audio output source to change the related
options. The check sign indicates the devices as default.
y Application Enhancement - the array of options will provide you a complete
guidance of anticipated sound effect for both output and input device.
y Main Volume - controls the volume or balance the right/left side of the speakers
that you plugged in front or rear panel by adjust the bar.
y Profiles - toggles between profiles.
y Advanced Settings - provides the mechanism to deal with 2 independent audio
streams.
y Jack Status - depicts all render and capture devices currently connected with your
computer.
y Connector Settings - configures the connection settings.

Audio 7.1-channel Configuration

To configure 7.1-channel audio, you have to connect front audio I/O module to JAUD1
connector and follow the below steps.
1. Click on the Advanced Settings to open the dialog below.

2. Select Mute the rear output device, when a front headphone plugged in.
3. Plug your speakers to audio jacks on rear and front I/O panel. When you plug into
a device at an audio jack, a dialogue window will pop up asking you which device is
current connected.

Rear I/O Panel 21

 Overview of Components

DIMMA2
DIMMA1 DIMMB1
CPU_FAN1 DIMMB2
CPU_PWR1 CPU Socket

SYS_FAN2

EZ Debug LED

ATX_PWR1

SYS_FAN1 JUSB1

PCI_E1 JBAT1

M2_1 SATA▼1▲2
JTPM1
JCI1
PCI_E2
JLED1 SATA3
PCI_E3 SATA4

JCOM1 JFP1
JAUD1 JLPT1 JFP2
JUSB3 SATA5
JUSB2 SATA6
JTBT1*

* JTBT1 is used to connect a specific card.

22 Overview of Components
Component Contents

Port Name Port Type Page

CPU_FAN1~2,SYS_FAN1~4 Fan Connectors 31

CPU_PWR1, ATX_PWR1 Power Connectors 29

CPU Socket LGA1151 CPU Socket 24

DIMMA1, DIMMA2,
DIMM Slots 25
DIMMB1,DIMMB2

JAUD1 Front Audio Connector 28

JBAT1 Clear CMOS (Reset BIOS) Jumper 34

JCI1 Chassis Intrusion Connector 32

JCOM1 Serial Port Connector 28

JFP1, JFP2 Front Panel Connectors 28

JLED1 RGB LED connector 33

JLPT1 Parallel Port Connector 33

JTPM1 TPM Module Connector 32

JUSB1 USB 3.1 Gen1 Connectors 30

JUSB2~3 USB 2.0 Connectors 30

M2_1 M.2 Slot (Key M) 27

PCI_E1~3 PCIe Expansion Slots 26

SATA1~6 SATA 6Gb/s Connectors 26

Overview of Components 23
 CPU Socket

Introduction to the LGA 1151 CPU

The surface of the LGA 1151 CPU has
two notches and a golden triangle to
assist in correctly lining up the CPU for
motherboard placement. The golden
triangle is the Pin 1 indicator.

Important
y Always unplug the power cord from the power outlet before installing or removing
the CPU.
y Please retain the CPU protective cap after installing the processor. MSI will deal
with Return Merchandise Authorization (RMA) requests if only the motherboard
comes with the protective cap on the CPU socket.
y When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink
is necessary to prevent overheating and maintain system stability.
y Confirm that the CPU heatsink has formed a tight seal with the CPU before booting
your system.
y Overheating can seriously damage the CPU and motherboard. Always make sure
the cooling fans work properly to protect the CPU from overheating. Be sure to
apply an even layer of thermal paste (or thermal tape) between the CPU and the
heatsink to enhance heat dissipation.
y Whenever the CPU is not installed, always protect the CPU socket pins by covering
the socket with the plastic cap.
y If you purchased a separate CPU and heatsink/ cooler, Please refer to the
documentation in the heatsink/ cooler package for more details about installation.
y This motherboard is designed to support overclocking. Before attempting to
overclock, please make sure that all other system components can tolerate
overclocking. Any attempt to operate beyond product specifications is not
recommended. MSI® does not guarantee the damages or risks caused by
inadequate operation beyond product specifications.

24 Overview of Components
DIMM Slots
DIMMA1 DIMMB1

Channel A Channel B

DIMMA2 DIMMB2

Memory module installation recommendation

DIMMB2 DIMMB2
DIMMB1
DIMMA2 DIMMA2 DIMMA2
DIMMA1

Important
y Always insert memory modules in the DIMMA2 slot first.
y Due to chipset resource usage, the available capacity of memory will be a little less
than the amount of installed.
y Based on Intel CPU specification, the Memory DIMM voltage below 1.35V is
suggested to protect the CPU.
y Please note that the maximum capacity of addressable memory is 4GB or less
for 32-bit Windows OS due to the memory address limitation. Therefore, we
recommended that you to install 64-bit Windows OS if you want to install more than
4GB memory on the motherboard.
y Some memory may operate at a lower frequency than the marked value when
overclocking due to the memory frequency operates dependent on its Serial
Presence Detect (SPD). Go to BIOS and find the Memory Try It! to set the memory
frequency if you want to operate the memory at the marked or at a higher
frequency.
y It is recommended to use a more efficient memory cooling system for full DIMMs
installation or overclocking.
y The stability and compatibility of installed memory module depend on installed CPU
and devices when overclocking.

Overview of Components 25
 PCI_E1~3: PCIe Expansion Slots

PCI_E1: PCIe 3.0 x16

PCI_E2: PCIe 3.0 x1

PCI_E3: PCIe 3.0 x1

Important
y When adding or removing expansion cards, always turn off the power supply and
unplug the power supply power cable from the power outlet. Read the expansion
card’s documentation to check for any necessary additional hardware or software
changes.
y If you install a large and heavy graphics card, you need to use a tool such as MSI
Gaming Series Graphics Card Bolster to support its weight to prevent deformation
of the slot.

SATA1~6: SATA 6Gb/s Connectors

These connectors are SATA 6Gb/s interface ports. Each connector can connect to one
SATA device.

SATA6 SATA4
SATA5 SATA3

SATA2
SATA1

Important
y Please do not fold the SATA cable at a 90-degree angle. Data loss may result during
transmission otherwise.
y SATA cables have identical plugs on either sides of the cable. However, it is
recommended that the flat connector be connected to the motherboard for space
saving purposes.

26 Overview of Components
M2_1: M.2 Slot (Key M)

Important
y Intel® RST only supports PCIe M.2 SSD with UEFI ROM,
does not support Legacy ROM.
y The SATA1 port will be unavailable when an M.2 SATA
SSD module has been installed in the M.2 slot.

Video Demonstration
Watch the video to learn how to Install M.2
module.
http://youtu.be/JCTFABytrYA

Installing M.2 module

1. Remove the screw from

the base screw.
2. Remove the base screw. 1

4
3. Tighten the base screw
into the hole of the
distance to the M.2 slot
as the length your M.2
module.
3 30°
4. Insert your M.2 module
into the M.2 slot at a
30-degree angle.

5. Put the screw in the

notch on the trailing edge
of your M.2 module and
tighten it into the base
screw. 5

Overview of Components 27
 JFP1, JFP2: Front Panel Connectors
These connectors connect to the switches and LEDs on the front panel.
2 10
JFP1

1 9

1 HDD LED + 2 Power LED +

3 HDD LED - 4 Power LED -

5 Reset Switch 6 Power Switch

7 Reset Switch 8 Power Switch

9 Reserved 10 No Pin

1 1 Speaker - 2 Buzzer +
JFP2
3 Buzzer - 4 Speaker +

JAUD1: Front Audio Connector

This connector allows you to connect audio jacks on the front panel.

2 10

1 9

1 MIC L 2 Ground

3 MIC R 4 NC

5 Head Phone R 6 MIC Detection

7 SENSE_SEND 8 No Pin

9 Head Phone L 10 Head Phone Detection

JCOM1: Serial Port Connector

This connector allows you to connect the optional serial port with bracket.

2 10

1 9

1 DCD 2 SIN

3 SOUT 4 DTR

5 Ground 6 DSR

7 RTS 8 CTS

9 RI 10 No Pin

28 Overview of Components
CPU_PWR1, ATX_PWR1: Power Connectors
These connectors allow you to connect an ATX power supply.

8 5
CPU_PWR1
4 1

1 Ground 5 +12V

2 Ground 6 +12V

3 Ground 7 +12V

4 Ground 8 +12V

1 +3.3V 13 +3.3V

2 +3.3V 14 -12V

3 Ground 15 Ground

12 24 4 +5V 16 PS-ON#

5 Ground 17 Ground

6 +5V 18 Ground
ATX_PWR1
7 Ground 19 Ground

8 PWR OK 20 Res

1 13 9 5VSB 21 +5V

10 +12V 22 +5V

11 +12V 23 +5V

12 +3.3V 24 Ground

Important
Make sure that all the power cables are securely connected to a proper ATX power
supply to ensure stable operation of the motherboard.

Overview of Components 29
 JUSB2~3: USB 2.0 Connectors
These connectors allow you to connect USB 2.0 ports on the front panel.

2 10

1 9

1 VCC 2 VCC

3 USB0- 4 USB1-

5 USB0+ 6 USB1+

7 Ground 8 Ground

9 No Pin 10 NC

Important
y Note that the VCC and Ground pins must be connected correctly to avoid possible
damage.
y In order to recharge your iPad,iPhone and iPod through USB ports, please install
MSI® SUPER CHARGER utility.

JUSB1: USB 3.1 Gen1 Connectors

These connectors allow you to connect USB 3.1 Gen1 ports on the front panel.

10 11

1 20

1 Power 11 USB2.0+

2 USB3_RX_DN 12 USB2.0-

3 USB3_RX_DP 13 Ground

4 Ground 14 USB3_TX_C_DP

5 USB3_TX_C_DN 15 USB3_TX_C_DN

6 USB3_TX_C_DP 16 Ground

7 Ground 17 USB3_RX_DP

8 USB2.0- 18 USB3_RX_DN

9 USB2.0+ 19 Power

10 NC 20 No Pin

Important
Note that the Power and Ground pins must be connected correctly to avoid possible
damage.

30 Overview of Components
CPU_FAN1~2,SYS_FAN1~4: Fan Connectors
Fan connectors can be classified as PWM (Pulse Width Modulation) Mode and DC
Mode. PWM Mode fan connectors provide constant 12V output and adjust fan speed
with speed control signal. DC Mode fan connectors control fan speed by changing
voltage. When you plug a 3-pin (Non-PWM) fan to a PWM Mode fan connector, the fan
speed will be always maintained at 100%, and that could be noisy.

PWM Mode fan connector

1

CPU_FAN1

1 Ground 2 +12V

3 Sense 4 Speed Control Signal

DC Mode fan connector

1
SYS_FAN1 SYS_FAN2

1 Ground 2 Voltage Control

3 Sense 4 NC

Switching fan mode and adjusting fan speed

You can switch between PWM mode and DC mode and adjust fan speed in BIOS >
Advanced > Hardware Monitor.

Select PWM Mode or DC Mode

In Hardware Monitor sub-menu, you can set the temperature levels and the
corresponding fan speed levels.

Important
Make sure fans are working properly after switching the PWM/ DC mode.

Overview of Components 31
 JCI1: Chassis Intrusion Connector
This connector allows you to connect the chassis intrusion switch cable.

Normal Trigger the chassis

(default) intrusion event

Using chassis intrusion detector

1. Connect the JCI1 connector to the chassis intrusion switch/ sensor on the chassis.
2. Close the chassis cover.
3. Go to BIOS > Settings > Security > Chassis Intrusion Configuration.
4. Set Chassis Intrusion to Enabled.
5. Press F10 to save and exit and then press the Enter key to select Yes.
6. Once the chassis cover is opened again, a warning message will be displayed on
screen when the computer is turned on.

Resetting the chassis intrusion warning

1. Go to BIOS > Settings > Security > Chassis Intrusion Configuration.
2. Set Chassis Intrusion to Reset.
3. Press F10 to save and exit and then press the Enter key to select Yes.

JTPM1: TPM Module Connector

This connector is for TPM (Trusted Platform Module). Please refer to the TPM security
platform manual for more details and usages.

2 14

1 13

1 LPC Clock 2 3V Standby power

3 LPC Reset 4 3.3V Power

5 LPC address & data pin0 6 Serial IRQ

7 LPC address & data pin1 8 5V Power

9 LPC address & data pin2 10 No Pin

11 LPC address & data pin3 12 Ground

13 LPC Frame 14 Ground

32 Overview of Components
JLED1: RGB LED connector
These connectors allow you to connect the 5050 RGB LED strips.

1 +12V 2 G

3 R 4 B

1
5050 LED strip
Extension cable
JLED1

Important
y This connector supports 5050 RGB multi-color LED strips (12V/G/R/B) with the
maximum power rating of 3A (12V). Please keeping the LED strip shorter than 2
meters to prevent dimming.
y Always turn off the power supply and unplug the power cord from the power outlet
before installing or removing the RGB LED strip.
y Please use the LED Effect of GAMING APP to adjust, calibrate and control the LED
light, refer to the Software section for details.

JLPT1: Parallel Port Connector

This connector allows you to connect the optional parallel port with bracket.

2 26

1 25

1 RSTB# 2 AFD# 3 PRND0

4 ERR# 5 PRND1 6 PINIT#

7 PRND2 8 LPT_SLIN# 9 PRND3

10 Ground 11 PRND4 12 Ground

13 PRND5 14 Ground 15 PRND6

16 Ground 17 PRND7 18 Ground

19 ACK# 20 Ground 21 BUSY

22 Ground 23 PE 24 Ground

25 SLCT 26 No Pin

Overview of Components 33
 JBAT1: Clear CMOS (Reset BIOS) Jumper
There is CMOS memory onboard that is external powered from a battery located on
the motherboard to save system configuration data. If you want to clear the system
configuration, set the jumpers to clear the CMOS memory.

Keep Data Clear CMOS/

(default) Reset BIOS

Resetting BIOS to default values

1. Power off the computer and unplug the power cord
2. Use a jumper cap to short JBAT1 for about 5-10 seconds.
3. Remove the jumper cap from JBAT1.
4. Plug the power cord and power on the computer.

EZ Debug LED
These LEDs indicate the debug status of the motherboard.

CPU - indicates CPU is not detected or fail.

DRAM - indicates DRAM is not detected or fail.
VGA - indicates GPU is not detected or fail.
BOOT - indicates the booting device is not detected
or fail.

34 Overview of Components
BIOS Setup
The default settings offer the optimal performance for system stability in normal
conditions. You should always keep the default settings to avoid possible system
damage or failure booting unless you are familiar with BIOS.

Important
●● BIOS items are continuous update for better system performance. Therefore, the
description may be slightly different from the latest BIOS and should be held for
reference only. You could also refer to the HELP information panel for BIOS item
description.
●● The pictures in this chapter are for reference only and may vary from the product
you purchased.

Entering BIOS Setup

Please refer the following methods to enter BIOS setup.
●● Press Delete key, when the Press DEL key to enter Setup Menu, F11 to enter
Boot Menu message appears on the screen during the boot process.
●● Use MSI FAST BOOT application. Click on GO2BIOS button and choose OK. The
system will reboot and enter BIOS setup directly.

Click on GO2BIOS

Function key

Key Function Key Function

F1 General Help F4 Enter CPU Specifications menu

F5 Enter Memory-Z menu F6 Load optimized defaults
Take a screenshot and save it to
F10 Save Change and Reset* F12 USB flash drive (FAT/ FAT32 format
only).
* When you press F10, a confirmation window which provides the modification
information appears. Select between Yes or No to confirm your choice.

BIOS Setup 35
 Resetting BIOS
You might need to restore the default BIOS setting to solve certain problems. There
are several ways to reset BIOS:
●● Go to BIOS and press F6 to load optimized defaults.
●● Short the Clear CMOS jumper on the motherboard.

Important
Please refer to the Clear CMOS jumper/ button section for resetting BIOS.

Updating BIOS
Updating BIOS with M-FLASH
Before updating:
Please download the latest BIOS file that matches your motherboard model from MSI
website. And then save the BIOS file into the USB flash drive.
Updating BIOS:
1. Insert the USB flash drive that contains the update file into the computer.
2. Reboot the system, and then press Del key to enter the BIOS Setup during POST.
3. Go to BIOS > M-FLASH > Select one file to update BIOS and ME, select a
BIOS file to perform the BIOS update process.
4. After the flashing process is 100% complete, the system will reboot.

Updating the BIOS with Live Update 6

Before updating:
Make sure the LAN driver is already installed and the internet connection is set
properly.
Updating BIOS:
1. Install and launch MSI LIVE UPDATE 6.
2. Select Manual scan.
3. Check MB BIOS box and click on Scan button.
4. Select the MB BIOS and click on icon to download and install the latest BIOS
file.
5. Click Next and choose In Windows mode. And then click Next and Start to start
updating BIOS.
6. After the flashing process is 100% completed, the system will restart
automatically.

36 BIOS Setup
System Status Menu
After entering BIOS, the following screen is displayed. The System Status Menu
allows you to configure basic system settings, such as time, date etc.

▶▶System Language [English]

Allows you to select the language of BIOS setup.
▶▶System Date
Sets the system date. Use tab key to switch between date elements.
The format is <day> <month> <date> <year>.
<day> Day of the week, from Sun to Sat, determined by BIOS. Read-only.
<month> The month from Jan. through Dec.
<date> The date from 1 to 31 can be keyed by numeric function keys.
<year> The year can be adjusted by users.
▶▶System Time
Sets the system time. Use tab key to switch between time elements.
The time format is <hour> <minute> <second>.
▶▶SATA PortX
Shows the information of connected SATA device.

Important
If the connected SATA device is not displayed, turn off computer and re-check SATA
cable and power cable connections of the device and motherboard.
▶▶System Information
Shows detailed system information, including CPU type, BIOS version, and Memory
(read only).
▶▶DMI Information
Shows system information, desktop Board Information and chassis Information. (Read
only).

BIOS Setup 37
 Advanced Menu
The Advanced Menu allows you to set up the items of special enhanced features.

▶▶PCI Subsystem Settings

Sets PCI, PCI express interface protocol and latency timer. Press <Enter> to enter the
sub-menu.
▶ PEG X - Max Link Speed [Auto]
Sets PCI Express protocol of PCIe x16 slots for matching different installed devices.
[Auto] This item will be configured automatically by BIOS.
[Gen1] Enables PCIe Gen1 support only.
[Gen2] Enables PCIe Gen2 support only.
[Gen3] Enables PCIe Gen3 support only.
▶ PCI Latency Timer [32]
Sets latency timer of PCI interface device.
[Options: 32, 64, 96, 128, 160, 192, 224, 248 PCI Bus clocks]
▶ Above 4G Decoding [Disabled]
Enables or disables 64-bit capable devices to be decoded in above 4G address
space. It is only available if the system supports 64-bit PCI decoding.
▶▶ACPI Settings
Sets ACPI parameters of onboard power LED behaviors. Press <Enter> to enter the
sub-menu.
▶▶Power LED [Blinking]
Sets shining behaviors of the onboard Power LED.
[Dual Color] The power LED turns to another color to indicate the S3 state.
[Blinking] The power LED blinks to indicate the S3 state.
▶▶Integrated Peripherals
Sets integrated peripherals' parameters, such as LAN, HDD, USB and audio. Press
<Enter> to enter the sub-menu.

38 BIOS Setup
 ▶▶Onboard LAN Controller [Enabled]
Enables or disables the onboard LAN controller.
▶▶LAN Option ROM [Disabled]
Enables or disables the legacy network Boot Option ROM for detailed settings.
This item will appear when Onboard LAN Controller is enabled.
[Enabled] Enables the onboard LAN Boot ROM.
[Disabled] Disables the onboard LAN Boot ROM.
▶▶Network Stack [Disabled]
Sets UEFI network stack for optimizing IPv4 / IPv6 function.
[Enabled] Enables UEFI network stack.
[Disabled] Disables UEFI network stack.
▶▶Ipv4 PXE Support [Enabled])
When “Enabled”, the system UEFI network stack will support Ipv4 protocol. This
item will appear when “Network Stack” is enabled.
[Enabled] Enables the Ipv4 PXE boot support.
[Disabled] Disables the Ipv4 PXE boot support.
▶▶Ipv6 PXE Support [Enabled])
When “Enabled”, the system UEFI network stack will support Ipv6 protocol. This
item will appear when “Network Stack” is enabled.
[Enabled] Enables the Ipv6 PXE boot support.
[Disabled] Disables the Ipv6 PXE boot support.
▶▶SATA Mode [AHCI Mode]
Sets the operation mode of the onboard SATA controller.
[AHCI Mode] Specify the AHCI mode for SATA storage devices. AHCI (Advanced
Host Controller Interface) offers some advanced features to enhance
the speed and performance of SATA storage device, such as Native
Command Queuing (NCQ) and hot-plugging.
[RAID Mode] Enables RAID function for SATA storage devices.
▶▶SATAx Hot Plug [Disabled]
Allows user to enable or disable the SATA hot plug support.
[Enabled] Enables hot plug support for the SATA ports.
[Disabled] Disables hot plug support for the SATA ports.
▶▶HD Audio Controller [Enabled]
Enables or disables the onboard High Definition Audio controller.
▶▶HPET [Enabled]
Enables or disables the HPET (High Precision Event Timers) support.
▶▶Integrated Graphics Configuration
Adjusts integrated graphics settings for optimum system. Press <Enter> to enter the
sub-menu.

BIOS Setup 39
 ▶▶Initiate Graphic Adapter [PEG]
Selects a graphics device as the primary boot device.
[IGD] Integrated Graphics Display.
[PEG] PCI-Express Graphics Device.
▶▶Integrated Graphics Share Memory [64M]
Selects a fixed amount of system memory allocated to the onboard graphics. This
item will appear when IGD Multi-Monitor is enabled.
▶▶IGD Multi-Monitor [Disabled]
Enables or disables the multi-screen output from integrated graphics and external
graphics card.
[Enabled] Enables multi-screen function for both integrated and external
graphics cards.
[Disabled] Disables this function.
▶▶Intel(R) Thunderbolt [Fully Disabled]
▶▶Thunderbolt(TM) Support
Enables or disables Thunderbolt™ support.
▶▶USB Configuration
Sets the onboard USB controller and device function. Press <Enter> to enter the sub-
menu.
▶▶USB Controller [Enabled]
Enables or disables all USB controller.
▶▶XHCI Hand-off [Enabled]
Enables or disables XHCI hand-off support for the operating system without XHCI
hand-off feature. This item will appear when USB Controller is enabled.
▶▶Legacy USB Support [Enabled]
Sets Legacy USB function support.
[Auto] The system will automatically detect if any USB device is connected
and enables or disables the legacy USB support.
[Enabled] Enable the USB support for legacy operating systems that do not
support USB.
[Disabled] The USB devices are available only for UEFI applications.
▶▶Super IO Configuration
Sets system Super I/O chip parameters including LPT and COM ports. Press <Enter>
to enter the sub-menu.
▶▶Serial (COM) Port x Configuration
Sets detailed configuration of serial(COM) port x. Press <Enter> to enter the sub-
menu.
▶▶Serial (COM) Port x [Enabled]
Enables or disables serial (COM) port x.

40 BIOS Setup
 ▶▶Serial (COM) Port x Settings [Auto]
Sets serial port x (COM). If set to Auto, BIOS will optimize the IRQ automatically or
you can set it manually.
▶▶Parallel (LPT) Port Configuration
Sets detailed configuration of parallel port (LPT). Press <Enter> to enter the sub-
menu.
▶▶Parallel (LPT) Port [Enabled]
Enables or disables parallel(LPT) port.
▶▶Parallel (LPT) Port Settings [Auto]
Sets parallel port (LPT). If set to Auto, BIOS will optimize the IRQ automatically or
you can set it manually.
▶▶Device Mode [STD Printer Mode]
Selects an operating mode for parallel port.
[STD Printer Mode] Printer port mode
[SPP] Standard Parallel Port mode
[EPP-1.9/ 1.7 + SPP] Enhanced Parallel Port-1.9/ 1.7 mode + Standard
Parallel Port mode.
[ECP] Extended Capability Port mode
[ECP + EPP-1.9/ 1.7] Extended Capability Port mode + Enhanced Parallel
Port-1.9/ 1.7 mode.
▶▶Hardware Monitor
Sets fan speeds. Press <Enter> to enter the sub-menu.
▶▶CPU/ SYS FanX Smart Fan Control [Enabled]
Enables or disables the smart fan control. Smart Fan Control automatically
controls fan speed depending on target temperature and to keep it with a specific
operating speed. When the temperature is over the maximum temperature, the
fan will operate maximum speed. When the temperature is under the minimum
temperature, the fan will operate minimum speed.
▶▶CPU/ SYS FanX fan type select [PWM Mode/ DC Mode]
Sets PWM mode or DC mode for installed CPU/ system fan.
▶▶CPU/ SYS FanX level 1~4 Temperature [40, 55, 70, 85]
Sets target temperature for level 1 to 4 (low to high). The fan will operate designate
speed according to level 1~4 target temperatures. These items will be un-available
when Smart Fan Control is disabled.
▶▶CPU/ SYS FanX level 1~4 Fan Speed [13, 38, 63, 100]
Sets fan duty cycle (%) for level 1 to 4 (low to high). The fan will operate designate
duty cycle according to level 1~4 target temperatures. These items will be un-
available when Smart Fan Control is disabled.
▶▶CPU Fan Fail Warning Control [Disabled]
Enables or disables to show the CPU fan fail warning message on the POST.

BIOS Setup 41
 ▶▶CPU temperature Warning Control [Disabled]
Enables or disables to show the CPU hight temperature warning message.
▶▶Power Management Setup
Sets system Power Management of EuP2013 and AC Power Loss behaviors. Press
<Enter> to enter the sub-menu.
▶▶EuP 2013 [Disabled]
Enables or disables the system power consumption according to EuP2013
regulation.
[Enabled] Optimize the system power consumption according to EuP 2013
regulation. It will not support S4 & S5 wake up by USB, PCI and
PCIe devices.
[Disabled] Disables this function.
▶▶Restore after AC Power Loss [Power Off]
Sets the system behaviors while encountering the AC power loss.
[Power Off] Leaves the system in power off state after restoring AC power.
[Power On] Boot up the system after restoring AC power.
[Last State] Restores the system to the previous state (power on/ power off)
before AC power loss.
▶▶System Power Fault Protection [Disabled]
Enables or disables the system to boot up when detecting abnormal voltage input.
[Enabled] Protect the system from unexpected power operation and remain the
shut down status.
[Disabled] Disables this function.
▶▶Windows OS Configuration
Sets Windows 8/ 8.1 detailed configuration and behaviors. Press <Enter> to enter
the sub-menu.
▶▶Windows 8.1/ 10 WHQL Support [Disabled]
Enables the supports for Windows 8.1/ 10 or disables for other operating systems.
Before enabling this item, make sure all installed devices & utilities (hardware &
software) should meet the Windows 8.1/ 10 requirements.
[Enabled] The system will switch to UEFI mode to meet the Windows
equirement.
[Disabled] Disables this function.
▶▶MSI Fast Boot [Disabled]
MSI Fast Boot is the fastest way to boot the system. It will disable more devices to
speed up system boot time which is faster than the boot time of Fast Boot.
[Enabled] Enables the MSI Fast Boot function to speed up booting time. And
the following Fast Boot field will be disabled and fixed.
[Disabled] Disables MSI Fast Boot.

Important
When MSI Fast Boot is enabled, you can use FAST BOOT application to enter BIOS
setup if needed. Please refer to page 35 for Entering BIOS Setup.

42 BIOS Setup
 ▶▶Fast Boot [Disabled/ windows7, Enabled/ windows 8.1/ 10]
Enables or disables the fast boot feature for Windows 8.1/ 10. This item will only be
available when MSI Fast Boot is disabled.
[Enabled] Enables the Fast Boot configuration to accelerate system boot time.
[Disabled] Disables the Fast Boot configuration.
▶▶Internal GOP Configuration
Manages the onboard Graphics Output Protocol (GOP). Press <Enter> to enter
the sub-menu. This sub-menu appear when Windows 8.1/ 10 WHQL Support is
enabled.
▶▶Secure Boot
Sets the Windows secure boot to prevent the unauthorized accessing. Press
<Enter> to enter the sub-menu. This sub-menu appear when Windows 8.1/ 10
WHQL Support is enabled.
▶▶Secure Boot Support [Disabled]
Enables or disables secure boot support.
[Enabled] Enables the secure boot function and allow you to set the secure
boot settings.
[Disabled] Disables this function.
▶▶Secure Boot Mode [Standard]
Selects the secure boot mode. This item is to select how the secure boot keys be
loaded. This item appears when Secure Boot Support is enabled.
[Standard] The system will automatically load the secure keys from BIOS.
[Custom] Allows user to configure the secure boot settings and manually load
the secure keys.
▶▶Key Management
Manages the secure boot keys. Press <Enter> to enter the sub-menu. This sub-
menu will appear when Secure Boot Mode sets to [Custom].
▶▶Wake Up Event Setup
Sets system wake up behaviors for different sleep modes. Press <Enter> to enter the
sub-menu.
▶▶Wake Up Event By [BIOS]
Selects the wake up event by BIOS or operating system.
[BIOS] Activates the following items, set wake up events of these items.
[OS] The wake up events will be defined by OS.
▶▶Resume By RTC Alarm [Disabled]
Disables or enables the system wake up by RTC Alarm.
[Enabled] Enables the system to boot up on a scheduled time/ date.
[Disabled] Disables this function.

BIOS Setup 43
 ▶▶Date (of month) Alarm/ Time (hh:mm:ss) Alarm
Sets RTC alarm date/ Time. If Resume By RTC Alarm is set to [Enabled], the
system will automatically resume (boot up) on a specified date/hour/minute/second
in these fields (using the <+> and <-> to select the date & time settings).
▶▶Resume By PCI-E Device [Disabled]
Enables or disables the system wake up by PCI express device.
[Enabled] Enables the system to be awakened from the power saving modes
when activity or input signal of PCI/ PCIe device is detected.
[Disabled] Disables this function.
▶▶Resume by USB Device [Disabled]
Disables or enables the system wake up by USB devices.
[Enabled] Enables the system to be awakened from sleep state when activity
of USB device is detected.
[Disabled] Disables this function.
▶▶Resume From S3/S4/S5 by PS/2 Mouse [Disabled]
Disables or enables the system wake up by PS/2 mouse.
[Enabled] Enables the system to be awakened from S3/ S4/ S5 state when
activity of PS/2 mouse is detected.
[Disabled] Disables this function.
▶▶Resume From S3/S4/S5 by PS/2 Keyboard [Disabled]
Disables or enables the system wake up by PS/2 keyboard.
[Any Key] Enables the system to be awakened from S3/ S4/ S5 state when
activity of any key on PS/2 keyboard is detected.
[Hot Key] Enables the system to be awakened from S3/ S4/ S5 state when
activity of hot key on PS/2 keyboard is detected.
[Disabled] Disables this function.
▶▶Hot Key [Ctrl+Space]
Selects a combination of keys as a hot key to awake the system. This item appears
when you set the Resume From S3/S4/S5 by PS/2 Keyboard to Hot Key.

44 BIOS Setup
Overclocking Menu
The Overclocking Menu allows you to adjust the frequency and voltage. Increasing the
frequency may get better performance.

Important
●● Overclocking your PC manually is only recommended for advanced users.
●● Overclocking is not guaranteed, and if done improperly, it could void your warranty
or severely damage your hardware.
▶▶OC Explore Mode [Normal]
Enables or disables to show the normal or expert version of OC settings.
[Normal] Provides the regular OC settings in BIOS setup.
[Expert] Provides the advanced OC settings for OC expert to configure in BIOS
setup.
Note: We use * as the symbol for the OC settings of Expert mode.
▶▶CPU Ratio Apply Mode [All Core]*
Sets applied mode for CPU ratio. This item only appears when a CPU that supports
Turbo Boost is installed.
[All Core] Activate the CPU Ratio field. All CPU cores will run the same CPU ratio
that be set in CPU Ratio.
[Per Core] Activate the X-Core Ratio Limit field. Sets each CPU core ratio
separately in X-Core Ratio Limit.
▶▶CPU Ratio [Auto]
Sets the CPU ratio that is used to determine CPU clock speed. This item can only be
changed if the processor supports this function.
▶▶1/2/3/4-Core Ratio Limit [Auto]
Allows you to set the CPU ratios for different number of active cores. These items only
appear when a CPU that support this function is installed.

BIOS Setup 45
 ▶▶Adjusted CPU Frequency
Shows the adjusted CPU frequency. Read-only.
▶▶CPU Ratio Offset When Running AVX [Auto]*
Sets a offset value to lower the CPU core ratio. It could be helpful for heat dissipation
when running AVX instruction set. If set to Auto, BIOS will configure this setting
automatically.
▶▶CPU Ratio Mode [Dynamic Mode]*
Selects the CPU Ratio operating mode. This item will appear when you set the CPU
ratio manually.
[Fixed Mode] Fixes the CPU ratio.
[Dynamic Mode] CPU ratio will be changed dynamically according to the CPU
loading.
▶▶Ring Ratio [Auto]
Sets the ring ratio. The valid value range depends on the installed CPU.
▶▶Adjusted Ring Frequency
Shows the adjusted Ring frequency. Read-only.
▶▶GT Ratio [Auto]
Sets the integrated graphics ratio. The valid value range depends on the installed
CPU.
▶▶Adjusted GT Frequency
Shows the adjusted integrated graphics frequency. Read-only.
▶▶EIST [Enabled]*
Enables or disables the Enhanced Intel® SpeedStep Technology.
[Enabled] Enables the EIST to adjust CPU voltage and core frequency
dynamically. It can decrease average power consumption and average
heat production.
[Disabled] Disables EIST.
▶▶Intel Turbo Boost [Enabled]*
Enables or disables the Intel® Turbo Boost. This item appears when the installed CPU
supports this function.
[Enabled] Enables this function to boost CPU performance automatically above
rated specifications when system request the highest performance
state.
[Disabled] Disables this function.
▶▶Extreme Memory Profile (X.M.P.) [Disabled]
X.M.P. (Extreme Memory Profile) is the overclocking technology by memory module.
This item will be available when the memory modules that support X.M.P. is installed.
[Disabled] Disables this function.
[Profile 1] Uses profile1 settings of XMP memory module.
[Profile 2] Uses profile2 settings of XMP memory module.

46 BIOS Setup
▶▶DRAM Reference Clock [Auto]*
Sets the DRAM reference clock. The valid value range depends on the installed CPU.
This item appears when a CPU that supports this adjustment is installed.
▶▶DRAM Frequency [Auto]
Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.
▶▶Adjusted DRAM Frequency
Shows the adjusted DRAM frequency. Read-only.
▶▶Memory Try It ! [Disabled]
It can improve memory compatibility or performance by choosing optimized memory
preset.
▶▶DRAM Timing Mode [Link]
Selects the memory timing mode.
[Link] Allows user to configure the DRAM timing for all memory channel.
[UnLink] Allows user to configure the DRAM timing for respective memory
channel.
▶▶Advanced DRAM Configuration
Press <Enter> to enter the sub-menu. User can set the memory timing for each/ all
memory channel. The system may become unstable or unbootable after changing
memory timing. If it occurs, please clear the CMOS data and restore the default
settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data,
and enter the BIOS to load the default settings.)
▶▶Memory Fast Boot [Auto] *
Enables or disables the initiation and training for memory every booting.
[Auto] The setting will be configured automatically by BIOS.
[Enabled] System will completely keep the archives of first intiation and training for
memory. So the memory will not be initialed and trained when booting
to accelerate the system booting time.
[Disabled] The memory will be initialed and trained every booting.
▶▶CPU Voltages control [Auto]
These options allows you to set the voltages related to CPU. If set to Auto, BIOS will
set these voltages automatically or you can set it manually.
▶▶DRAM Voltages control [Auto]
These options allows you to set the voltages related to memory. If set to Auto, BIOS
will set these voltages automatically or you can set it manually.
▶▶PCH Voltages control [Auto]
These options allows you to set the voltages related to PCH. If set to Auto, BIOS will
set these voltages automatically or you can set it manually.

BIOS Setup 47
 ▶▶CPU Memory Changed Detect [Enabled]*
Enables or disables the system to issue a warning message during boot when the
CPU or memory has been replaced.
[Enabled] The system will issue a warning message during boot and then you
have to load the default settings for new devices.
[Disabled] Disables this function and keeps the current BIOS settings.
▶▶CPU Specifications
Press <Enter> to enter the sub-menu. This sub-menu displays the information of
installed CPU. You can also access this information menu at any time by pressing
[F4]. Read only.
▶▶CPU Technology Support
Press <Enter> to enter the sub-menu. The sub-menu shows the key features of
installed CPU. Read only.
▶▶MEMORY-Z
Press <Enter> to enter the sub-menu. This sub-menu displays all the settings and
timings of installed memory. You can also access this information menu at any time by
pressing [F5].
▶▶DIMMx Memory SPD
Press <Enter> to enter the sub-menu. The sub-menu displays the information of
installed memory. Read only.
▶▶CPU Features
Press <Enter> to enter the sub-menu.
▶▶Hyper-Threading [Enabled]
Intel Hyper-Threading technology treats the multi cores inside the processor as
multi logical processors that can execute instructions simultaneously. In this way,
the system performance is highly improved. This item appears when the installed
CPU supports this technology.
[Enable] Enables Intel Hyper-Threading technology.
[Disabled] Disables this item if the system does not support HT function.
▶▶Active Processor Cores [All]
Allows you to select the number of active CPU cores.
▶▶Limit CPUID Maximum [Disabled]
Enables or disables the extended CPUID value.
[Enabled] BIOS limits the maximum CPUID input value to circumvent boot
problems with older operating system that do not support the
processor with extended CPUID value.
[Disabled] Use the actual maximum CPUID input value.

48 BIOS Setup
▶▶Intel Virtualization Tech [Enabled]
Enables or disables Intel Virtualization technology.
[Enabled] Enables Intel Virtualization technology and allows a platform to run
multiple operating systems in independent partitions. The system
can function as multiple systems virtually.
[Disabled] Disables this function.
▶▶Intel VT-D Tech [Disabled]
Enables or disables Intel VT-D (Intel Virtualization for Directed I/O) technology.
▶▶Hardware Prefetcher [Enabled]
Enables or disables the hardware prefetcher (MLC Streamer prefetcher).
[Enabled] Allows the hardware prefetcher to automatically pre-fetch data
and instructions into L2 cache from memory for tuning the CPU
performance.
[Disabled] Disables the hardware prefetcher.
▶▶Adjacent Cache Line Prefetch [Enabled]
Enables or disables the CPU hardware prefetcher (MLC Spatial prefetcher).
[Enabled] Enables adjacent cache line prefetching for reducing the cache
latency time and tuning the performance to the specific application.
[Disabled] Enables the requested cache line only.
▶▶CPU AES Instructions [Enabled]
Enables or disables the CPU AES (Advanced Encryption Standard-New
Instructions) support. This item appears when a CPU supports this function.
▶▶Intel Adaptive Thermal Monitor [Enabled]
Enables or disables the Intel adaptive thermal monitor function to protect the CPU
from overheating.
[Enabled] Throttles down the CPU core clock speed when the CPU is over the
adaptive temperature.
[Disabled] Disables this function.
▶▶Intel C-State [Auto]
Enables or disables the Intel C-state. C-state is a processor power management
technology defined by ACPI.
[Auto] This setting will be configured automatically by BIOS.
[Enabled] Detects the idle state of system and reduce CPU power consumption
accordingly.
[Disabled] Disable this function.
▶▶C1E Support [Disabled]
Enables or disables the C1E function for power-saving in halt state. This item
appears when Intel C-State is enabled.
[Enabled] Enables C1E function to reduce the CPU frequency and voltage for
power-saving in halt state.
[Disabled] Disables this function.

BIOS Setup 49
 ▶▶Package C State limit [Auto]
This item allows you to select a CPU C-state level for power-saving when system is
idle. The options of C-state depend on the installed CPU. This item appears when
Intel C-State is enabled.
▶▶CFG Lock [Enabled]
Lock or un-lock the MSR 0xE2[15], CFG lock bit.
[Enabled] Locks the CFG lock bit.
[Disabled] Un-locks the CFG lock bit.
▶▶EIST [Enabled]
Enables or disables the Enhanced Intel® SpeedStep Technology. This item will
appear when OC Explore Mode is set to Normal.
[Enabled] Enables the EIST to adjust CPU voltage and core frequency
dynamically. It can decrease average power consumption and
average heat production.
[Disabled] Disables EIST.
▶▶Intel Turbo Boost [Enabled]
Enables or disables the Intel® Turbo Boost. This item is for Normal mode and
appears when a CPU that support Turbo Boost is installed.
[Enabled] Enables this function to boost CPU performance automatically over
specification when system request the highest performance state.
[Disabled] Disables this function.
▶▶Long Duration Power Limit (W) [Auto]
Sets the long duration TDP power limit for CPU in Turbo Boost mode.
▶▶Long Duration Maintained (s) [Auto]
Sets the maintaining time for Long duration power Limit(W).
▶▶Short Duration Power Limit (W) [Auto]
Sets the short duration TDP power limit for CPU in Turbo Boost mode.
▶▶CPU Current Limit (A) [Auto]
Sets maximum current limit of CPU package in Turbo Boost mode. When the
current is over the specified value, the CPU will automatically reduce the core
frequency for reducing the current.
▶▶FCLK Frequency [Auto]
Sets FCLK frequency. Lower FCLK frequency may help you to set higher base
clock frequency.
▶▶DMI Link Speed [Auto]
Sets DMI speed.

50 BIOS Setup
M-Flash Menu
The M-Flash Menu allows you to update BIOS with a USB flash disk.

▶▶Select one file to update BIOS and ME

Selects a BIOS file, includes the ME management settings, in the USB flash drive to
update the BIOS and ME. The system will reboot after updating.

BIOS Setup 51
 Security Menu
The Security Menu allows you to set supervisor and user passwords.

▶▶Administrator Password
Sets administrator password for system security. User has full rights to change the
BIOS items with administrator password. After setting the administrator password, the
state of this item will show “Installed”.
▶▶User Password
Sets User Password for system security. User has limited rights to change the BIOS
items with user password. This item will be available when administrator password is
set. After setting the user password, the state of this item will show “Installed”.
▶▶Password Check [Setup]
Selects a condition that will request the password.
[Setup] A password will be requested for entering the BIOS Setup.
[Boot] A password will be requested for booting the system.
▶▶Password Clear [Enabled]
Enables or disables the clear CMOS behavior to clear a set password.
[Enabled] The password will be erased after clear CMOS.
[Disabled] The password will always be kept.

Important
When selecting the Administrator / User Password items, a password box will appear
on the screen. Type the password then press <Enter>. The password typed now will
replace any previous set password from CMOS memory. You will be prompted to
confirm the password. You may also press <Esc> to abort the selection.
To clear a set password, press <Enter> when you are prompted to enter a new
password. A message will confirm the password is being disabled. Once the password
is disabled, you can enter the setup and OS without authorization.

52 BIOS Setup
▶▶Trusted Computing
Sets TPM (Trusted Platform Module) function.
▶▶Security Device Support [Enabled]
Enables or disables the TPM function to build the endorsement key for accessing
the system.
▶▶TPM Device Selection [PTT]
Selects TPM device: PTT or dTPM.
[PTT] Select it for Intel Platform Trust technology
[dTPM] Select it for installed TPM device.
▶▶Device select [Auto]
Selects TPM 1.2 or TPM 2.0 technology for installed TPM device. If set to Auto,
BIOS will detect it automatically.
▶▶Chassis Intrusion Configuration
Press <Enter> to enter the sub-menu.
▶▶Chassis Intrusion [Disabled]
Enables or disables recording messages when the chassis is opened. This function
is ready for the chassis equips a chassis intrusion switch.
[Enabled] Once the chassis is opened, the system will record and issue a
warning message.
[Reset] Clear the warning message. After clearing the message, please
return to Enabled or Disabled.
[Disabled] Disables this funcion.

BIOS Setup 53
 Boot Menu
The Boot Menu allows you to specify the priority of boot devices.

▶▶Full Screen Logo Display [Enabled]

Enables or disables to show the full screen logo while system POST.
[Enabled] Shows the logo in full screen.
[Disabled] Shows the POST messages.
▶▶GO2BIOS [Disabled]
Allows system to enter BIOS setup directly by pressing the Power button for 4 sec
upon bootup.
[Enabled] The system boots straight to the BIOS setup by long pressing the power
button about 4 seconds when the system is off.
[Disabled] Disables this function.
▶▶Bootup NumLock State [On]
Select the keyboard NumLock state upon bootup.
▶▶AUTO CLR_CMOS [Disabled]
Enables or disables the CMOS data to be resumed automatically when the booting
process hang-up over 5 seconds.
▶▶Boot Mode Select [LEGACY+UEFI]
Sets the system boot mode from legacy or UEFI architecture depending on OS
installation requirement. This item will become un-selectable and will be configured
automatically by BIOS when Windows 8.1/ 10 WHQL Support is enabled.
[UEFI] Enables UEFI BIOS boot mode support only.
[LEGACY+UEFI] Enables both Legacy BIOS boot mode and UEFI BIOS boot
mode.
▶▶FIXED BOOT ORDER Priorities
Sets device priority for system boot.
▶▶Boot Option Priorities
These items are used to prioritize the installed boot devices.

54 BIOS Setup
Save & Exit Menu
This menu allows you to load the BIOS default values or factory default settings into
the BIOS and exit the BIOS setup utility with or without changes.

▶▶Discard Changes and Exit

Exit BIOS setup without saving any change.
▶▶Save Changes and Reboot
Save all changes and reboot the system.
▶▶Save Changes
Save current changes.
▶▶Discard Changes
Discard all changes and restore to the previous values.
▶▶Restore Defaults
Restore or load all default values.
▶▶Boot Override
Enter the of EFI Shell screen. The installed boot-able devices will appear on this
menu, you can select one of them be the boot device.

BIOS Setup 55
 Software Description
Installing Windows® 7/ 8.1/ 10
1. Power on the computer.
2. Insert the Windows® 7/ 8.1/ 10 disc into your optical drive.
Note: Due to chipset limitation, during the Windows 7 installation process, USB
optical drives or USB flash drives are not supported. You can use MSI Smart Tool
to install Windows® 7.
3. Press the Restart button on the computer case.
4. For windows 8.1/ 10, skip this step. For Windows 7, access the BIOS menu
SETTING > Advanced > Windows OS Configuration > Windows 7 Installation and
set the item to enabled, save changes and restart.
Note: It is suggested to plug in your USB Keyboard/ USB Mouse to the leftmost
USB port when installing Windows® 7.
5. Press F11 key during the computer POST (Power-On Self Test) to get into Boot
Menu.
6. Select your optical drive from the Boot Menu.
7. Press any key when screen shows Press any key to boot from CD or DVD...
message.
8. Follow the instructions on the screen to install Windows® 7/ 8.1/ 10.

Installing Drivers
1. Start up your computer in Windows® 7/ 8.1/ 10.
2. Insert MSI® Driver Disc into your optical drive.
3. The installer will automatically appear and it will find and list all necessary
drivers.
4. Click Install button.
5. The software installation will then be in progress, after it has finished it will
prompt you to restart.
6. Click OK button to finish.
7. Restart your computer.

Installing Utilities
Before you install utilities, you must complete drivers installation.
1. Insert MSI® Driver Disc into your optical drive.
2. The installer will automatically appear.
3. Click Utilities tab.
4. Select the utilities you want to install.
5. Click Install button.
6. The utilities installation will then be in progress, after it has finished it will prompt
you to restart.
7. Click OK button to finish.
8. Restart your computer.

56 Software Description
 COMMAND CENTER
COMMAND CENTER is an user-friendly software and exclusively developed by MSI,
helping users to adjust system settings and monitor status under OS. With the help
of COMMAND CENTER, making it possible to achieve easier and efficient monitoring
process and adjustments than that under BIOS. In addition, the COMMAND CENTER
can be a server for mobile remote control application.
System Information CPU Temperature

Feature Menu

Profile
Feature Title Buttons

Feature
Control Panel

Next Feature

Previous
Feature

Page Indicator

Option Buttons
Resize Corner

Profile Buttons

y Default - load the default values for the current feature.

y Apply - apply your changes.
y Save - store values in the file with individual file extension.
y Load - load the values from the file.

Important
Every time you shut down the system, the configured setting will be restored to the
factory default. If you want to use the saved settings, you have to load it every time by
clicking the Load and Apply buttons.

CPU Frequency
CPU Frequency control panel allows you to change
CPU Ratio and Base clock. You can see the current
frequency of each CPU core on the top of the panel.

Software Description 57
 CPU Fan
CPU Fan control panel provides Smart mode and
Manual Mode. You can switch the control mode by
clicking the Smart Mode and Manual Mode buttons
on the top of the CPU Fan control panel.
y Manual Mode - allows you to manually control the
CPU fan speed by percentage.
y Smart Mode - a linear fan speed control feature.
The control panel contains 4 dots allows you to
Manual Mode
drag and adjust the Smart Speed slopes. The fan
speed will be changed along these lines with CPU
temperature. The white dot will create strip chart
in real time.
y System Fan Button - to open the system fan
control panel in new window.
y Fan Tune Button - to automatically optimize the
smart fan setting.

Smart Mode

CPU Voltage
CPU Voltage control panel allows you to control the
CPU voltage.

DRAM Frequency & DRAM Voltage

y DRAM Frequency - Shows the DRAM clock, ratio
and frequency.
y DRAM Voltage - Allows you to adjust the DRAM
voltage. The risky values are displayed in red.

IGP Frequency & GT Voltage

y IGP Frequency - Allows you to adjust the IGP ratio,
and shows the IGP clock, ratio and frequency.
y GT Voltage - Allows you to adjust the GT voltage.
The risky values are displayed in red.

58 Software Description
Option Buttons - Advanced
When click the Advanced button, The Voltage, Fan and DRAM icons will appear.

y Voltage - allows you to adjust advanced voltage values of CPU and chipset.
y Fan - allows you to control the system fans speed.
y DRAM - shows the current Advanced DRAM parameters, and allows you to change
the settings by selecting values from the drop-down menu on the right hand side.
y Sensor - allows you to monitor your motherboard temperature and fan speed with
the virtual thermal image. You can drag and drop the fan icons to new locations.
When you press the Cooling button, all fans will run at full speed.

Option Buttons - Setting

When click the Setting button, The Record, Warning and Mobile Control icons will
appear.

y Record - allows you to monitor the status of voltage, fan speed and temperature in
real time.
ƒ To filter record charts, select the check box next to the items.
ƒ When click the Play button, the chart pane will start to show the recording chart.
If you want to check the value of a specific spot on chart, please move the orange
vertical line to the spot.
ƒ History Record stores the data and names with date and time.
ƒ To make a history record: Select items and click the Record button. When finished,
click the Record button again. The data will be stored in the drop-down menu.
ƒ To load a record, click the drop-down menu and select one from the list.
ƒ To delete a record, select the record that you want to delete, and click the Trash
Can icon.
y Warning - contains fields of voltage, fan speed and temperature for you to set the
threshold values. When system detects the status over your settings, a warning
message will pop-up.

Software Description 59
 y Mobile Control - is only available for the motherboard with the built-in WiFi module.
It allows you to enable/disable the COMMAND CENTER Remote Server. Please refer
to the instruction on the Mobile Control control panel.
y To start remote control: (optional)
1. Download and install MSI® COMMAND CENTER APP to your mobile device.
2. Enable COMMAND CENTER Remote Server on the Mobile Control panel.
3. Enable SoftAP Management.
4. Enter SSID and Password, and then click the Apply button.
5. Activate Wi-Fi® on your mobile device and connect to SoftAP with the SSID.
6. Run MSI® COMMAND CENTER APP on your mobile device.
7. Find the IP address on the SoftAP Management Setting area, and enter the IP
address on your MSI® COMMAND CENTER APP to link your system.
8. Press Refresh on the MSI® COMMAND CENTER APP to verify that monitoring and
OC functions are working properly.

Option Buttons - Information

When click the Information button, The Motherboard, CPU, Memory and HW monitor
icons will appear.

You can click the icons to open the related information.

Gadget Mode
COMMAND CENTER provides a gadget mode to
monitor the system status. You can switch between
gadget mode and full mode by clicking the arrow
icon on the top left.
y To arrange gadgets:
1. Click the Spanner icon on the Gadget mode,
a configuration panel will slide out.
2. Select the check box next to the items.
3. Click the Close button.

60 Software Description
LIVE UPDATE 6
LIVE UPDATE 6 is an application for the MSI® system to scan and download the latest
drivers, BIOS and utilities. With LIVE UPDATE 6, you don’t need to search the drivers
on websites, and don’t need to know the models of motherboard and graphics cards.
LIVE UPDATE 6 will download the appropriate drivers automatically.

Download Options

Download List

Scan / Download / Total

Installer button

System Information

Last Scanned Date

There are Live Update, History, Setting and System Information tabs at the top. You
can click the tab to switch the control panel.
y Live Update - When you launch LIVE UPDATE 6, you will see the Live update tab at
first. This tab allows you to select files to download. You can also read the relevant
information by clicking the information icon on the right of the item listed.
y History - shows the downloading history.
y Setting - allows you to specify the frequency that LIVE UPDATE 6 remind you to
update.
y System Information - displays the information of the system.

Updating The System

This section describes how to update your system with LIVE UPDATE 6. Please follow
the steps below:
1

2
4

5
3

1. Select the Live Update tab.

Software Description 61
 2. Choose Automatic scan, system will automatically scan all the items and search
for the latest update files. Or you can choose Manual scan and select the items you
wish to scan.
3. Click the Scan button at the bottom. It may take several moments to complete the
process.
4. When the download list appears, please select the items you intend to update.
5. Click Download button at the bottom.
6. When Save Path prompt, you can specify a download directory.

7. When downloading you will see the screen below. It may take several moments to
complete the process.

8. To install the applications, simply unpack the packages and install.

Total Installer
Total Installer is a convenient feature to simplify frequent installing procedure. To use
Total Installer:

3
1

1. Scan updates in Live Update tab.

2. Check the Select All check-box you intend to update.
3. Click the Total Installer button. LIVE UPDATE 6 will automatically install them.
4. When prompted, click OK to complete the Total Installer procedure
5. Reboot your system.

62 Software Description
GAMING APP
GAMING APP is an application designed to quickly control your system for improving
gaming performance.
Setting Button
Information Button
Remote Control Setting

Full Speed GPU Fan Gaming Function

Buttons

CPU Frequency GPU Frequency

Control Mode Buttons

Peripheral Device
Function Buttons

y Setting Button - allows you to run GAMING APP when Windows starts.
y Information Button - shows the information of this application.
y CPU Frequency - shows the current CPU frequency.
y Control Mode Buttons
ƒ OC Mode - enables Game Boost function to automatically overclock the CPU.
ƒ Gaming Mode - automatically optimize the CPU ratio and the GPU clock.
ƒ Silent Mode - reverts the CPU ratio and GPU clock to the default values.
y Gaming Function Buttons - allows you to use LED Effect, OSD, Eye Rest and Dragon
Eye functions.
y Peripheral Device Function Buttons - allows you to set the Gaming Hotkey, Mouse
Master and VR Ready functions.
y Remote Control Setting - is only available for the motherboard with the built-in
WiFi module or with an external WiFi home router. It allows you to set up a set of
Name and Password to link the android device the motherboard. Please refer to the
following instructions to complete the remote control setting.
1. Download and install the MSI® GAMING APP APP to your android device.
2. Set up a set of Name and the Password on the Remote Control Setting panel, and
then click the Apply button.
3. Activate Wi-Fi® on your android device and connect it to the wireless network of
the motherboard.
4. Run MSI® GAMING APP APP on your android device.
5. Press the Remote Control Setting icon on the MSI® GAMING APP APP to find the
paired device Name you set on the Remote Control Setting panel.
6. Enter the Password you set on the Remote Control Setting panel.0
7. Finally, you can use the MSI® GAMING APP APP to control the aspect of your
motherboard with the android device.

Software Description 63
 OSD Setting Panel
Use the OSD setting panel to specify information within on-screen display (OSD).

y Apply Button - allows you to accept selections.

Eye Rest
Eye Rest allows you to optimize the display on your monitor.

y EyeRest - reduces blue-light of your LED backlit screen, in order to protect your
eyes.
y Gaming - automatically increase contrast ratio of your screen.
y Movie - automatically increase dynamic contrast ratio of your screen.
y Customize - allows you to adjust gamma, contrast and color balance for your
screen.
y Default - loads the default settings.

64 Software Description
VR Ready
VR Ready can automatically detects VR devices connected to the system. When
enabled, it can provide the right advice to make sure your system is VR Ready.

VR ON/ OFF

Applications

y VR ON/ OFF -enables or disables VR device support.

y Applications - appears when you turn on the VR support. It allows you to close some
applications to optimize the system for better VR experience.

Software Description 65
 Mouse Master
Mouse Master provides mouse macro function. You can also use it to change DPI of
your mouse.

DPI Setting
Delay Time Default Button
Macro Hot Key DPI Hot Key
Mouse Action

Action List
Test Area

Edit Buttons Clear Button

Load Button
Save Button

y Delay Time - allows you to input delay time and click the Add button to insert a
delay in the macro.
y Macro Hot Key - allows you to assign a hotkey from A to Z to activate the macro.
y Mouse Action - assigns mouse actions to the macro.
ƒ New - captures the mouse coordinate and add to the macro.
ƒ Left - add a left-click to the macro.
ƒ Middle - add a middle-click to the macro.
ƒ Left - add a left-click to the macro.
y Action List - shows the actions of the current macro.
y Edit Buttons - there 3 buttons for editing the macro.
ƒ Run - activates the macro.
ƒ Delete - removes the selected action from the macro.
ƒ Clear - removes all actions from the macro.
y Load Button - allows you to load a macro.
y Save Button - allows you to save the macro to a file.
y DPI Setting - allows you select the mouse DPI from the drop-down menu.
y Default Button - reverts to the default DPI setting.
y DPI Hot Key - allows you to assign a hotkey from A to Z to activate the DPI setting.
Please note that you muse hold the hotkey to keep the DPI setting. When you release
the hotkey, the DPI setting will be reverted to default.
y Test Area - allows you to test the mouse movement.
y Clear Button - clears the test area.

66 Software Description
RAMDISK
RAMDISK creates a virtual RAM drive using the available memory in your computer,
the performance of the RAMDISK is faster than an SSD and hard drive. RAMDISK
allows you to store any temporary information on it. Furthermore, using the RAMDISK
will extend your SSD’s life by sparing it from excessive reading and writing.

Creating a RAM Disk

When RAMDISK is started, it will create a default RAM disk. If you want to change
settings, refer to following instructions.

Setting Option

Backup

Apply
Button

Management

y Setting - specify Letter, Name, Size and Format of the RAM disk.
y Option - select browser temporary files to save/load on the RAM disk. You can also
add software files to improve reading speed.
y Backup - specify backup and restore settings to prevent data loss. All files will be
lost each time the RAMDISK is stopped if you do not backup.
ƒ Browse Button - set the path to the image file.
ƒ Backup Right Now Button - manually backup files.
ƒ Restore On Boot - check this box to have the image file loaded automatically when
RAMDISK starts.
ƒ Auto Backup - check this box to backup automatically over a period of time.
y Apply Button - allows you to apply changes.
y Management - shows RAMDISK information and allows you to delete files.
Remove the RAM disk

Dislpay
information
Delete files
in the RAM
disk.

Software Description 67
 GAMING LAN MANAGER
GAMING LAN MANAGER is an utility for traffic shaping for the Windows 7/ 8.1/ 10.
It can keep your internet fast during heavy upload/ download and improve your ping
for online games. If your motherboard has a Wi-Fi module, GAMING LAN MANAGER
provides virtual access point function for traffic shaping for your mobile devices.

y Applications - displays currently using network bandwidth applications. You can

prioritize Games, Medias or File sharing programs as high as possible.
y Performance - shows top 5 applications by total traffic, allows you to monitor
network bandwidth usage.
y Network Test - allows you to setup bandwidth control.
y Advanced Setting - allows you to expand RWIN to accelerate download speed. You
can also block IP address and setup virtual access point.
y Information - shows version information.

Configuring Bandwidth
This section describes how to configure Internet Provider Speed. You can configure
default internet upload and download bandwidth from the Network Test tab on the
GAMING LAN MANAGER window.

Important
Before using the GAMING LAN MANAGER for the first time, you should use the
Test Network Speed button which runs a speed test of your current total Internet
bandwidth delivered through your Internet service provider.

68 Software Description
Speed Testing
The speed testing is used to optimize bandwidth usage. To test the Upload and Down-
load speed, please follow the steps below:

1. Click the Network Test block in GAMING LAN MANAGER.

2. Click Test Network Speed button. The test takes several minutes to test your
network speed.
3. Enter the testing results into Upload Speed and Download Speed fields.
4. Check the Enable Bandwidth Control to allow the GAMING LAN MANAGER to
manage the bandwidth.

Software Description 69
 DRAGON EYE
DRAGON EYE is an application allows you to watch a game guide, tutorial, live match
or tournament stream while playing a game. In the game, you can use hotkeys to
control / adjust the window of video.

Size Settings
Position Settings
On / Off Switch Help

Transparency Settings

Video List

Hotkeys Information

y On / Off Switch - enables or disables Dragon Eye during your gaming sessions.
Switch it on before you launch the game in order to watch video while playing.
y Video List - allows you to select the video you want to watch, and also add videos or
channels to the list. You simply paste the URL of your video or stream into the input
bar and hit the +. Then your video or stream will be in the list and you can select it to
view it with Dragon Eye.
y Size Settings - allows you to select the size of the Dragon Eye video content
displayed on-screen when you’re playing a game. There are three options available:
ƒ WQVGA (Small – 400×240)
ƒ HVGAW (Medium – 640×360)
ƒ WVGA (Large – 768×480)
y Position Settings - allows you to select where the Dragon Eye video needs to be
displayed on screen. This way you can control where you want your video in-game,
so you can place it on a place where no important game information is.
y Help - If you want to watch the video tutorial for Dragon Eye or want to see if your
game is supported, press this button and the help window will be shown.
y Transparency Settings - allows you to set the transparency of your Dragon Eye
video.
ƒ 0 = opaque | 100 = transparent.
y Hotkeys Information - In this information screen you can find the hotkeys for
Dragon Eye. There are three hotkeys:
ƒ Alt+F9 - switches mouse focus between video window and game itself. (Direct
interface to adjust progress bar, volume and other settings of video during the
game)
ƒ Alt+F10 - turns on/off video window .
ƒ Alt+F11 - adjusts transparency of video clip.
NOTE: To customize hotkey, simply select the hotkey icon and then press the keys
combination you want to use as a hotkey.

70 Software Description
Intel® Extreme Tuning Utility
Intel® Extreme Tuning Utility (Intel XTU) is a simple overclocking software for you to
tune, test and monitor your system.
Tuning Controls Views
Settings
Help

Navigation System
Table

System System
Graphs Monitors

y Views Settings Help

ƒ Views - toggles to switche between Monitoring and Show All view.

ƒ Settings - opens the General Settings window.
ƒ Help - displays the help content for Intel XTU in a separate window.
y Navigation - lists all of the major functions of Intel XTU.
ƒ System Information - shows the details about your system.
ƒ App-Profile Pairing - tunes automatically based on active application.
ƒ Manual Tuning - changes system settings in a free form.
ƒ Stress Test - tests the stability of your system.
ƒ Benchmarking - analyzes and compares your system’s performance against
other system profiles.
ƒ Profiles - manages sets of system settings.
y Tuning Controls - displays the controls for changing the system settings in manual
tuning. For stress tests and profiles, this area displays the settings for these
features.
y System Table - displays information about the current system settings and a
summary of your changes.
y System Graphs - shows measured system values over a period of time. The system
graphs update live as changes are detected in the system. You can customize the
system graphs to show the data you need for your overclocking strategy in the
system graphs preferences.
y System Monitors - shows the range of the value, averages, and the current value.
The monitors change color if the monitored values fall into warning or critical zones.

Software Description 71
 SteelSeries Engine 3
SteelSeries Engine 3 is a unified platform built to support all of SteelSeries products.
It can deploy your saved device settings automatically when switching between your
favorite games or applications.
After installation the SteelSeries Engine background processes will start and the
interface will open automatically.

My Gear

Device Cards

Library

Application
Configuration

y My Gear - all of your SteelSeries devices in one place.

ƒ Device Cards - all of your SteelSeries devices are easily accessible from the My
Gear tab, regardless of type, connection status, or which applications they are
assigned to.
y Library - quickly set up your configurations to autolaunch with an application.
ƒ Application Configuration - you can choose to have configurations deploy
automatically whenever you use a specific game or application. Add any number
of applications to your library and SteelSeries Engine 3 will seamlessly change the
configurations of your devices as you switch between them.

Configuration Windows
Configuration Windows are unique to their devices and each of them includes a
collapsible Configuration List Panel of all the configurations for that device. You
can create a new configuration by selecting the New button at the bottom of the
Configuration List Panel.

Configuration
Windows

72 Software Description
Configuring Your Devices
You can custom configurations for SteelSeries devices in their Configuration Windows.
The top left displays the name of the configuration you are viewing, the body features
widgets for customizing various functions of the device, and at the bottom are Save/
Revert buttons, a Live Preview toggle, and a button to open/close the collapsible
Configuration List Panel.
Widgets Widgets Toggle Widgets

Configuration Windows Toggle Live Preview Revert/ Save Button

y Widgets - allow you to customize a certain aspect of your device.

y Widgets Toggle - allows you to toggle Widgets .
y Configuration Windows Toggle - allows you to toggle the Configuration Windows.
y Live Preview - gives you the full experience of your configuration’s look, feel, and
sound while you are editing it.
y Revert/ Save Button - configuration changes are not written to the database until
you select Save. This gives you freedom to experiment, knowing that you can select
Revert to undo changes.

Tool Tip
When you click the question mark next to a feature name on the panel, a tooltip will
show, describing the particular function of that item.

Question Mark

Software Description 73
 CPU-Z
CPU-Z is an utility that gathers information on some of the main devices of your
system.

y CPU Tab - shows processor name, code name, package, specification, instructions
sets, core speed and cache levels.
y Caches Tab - shows extended information related to the cache capabilities.
y Mainboard Tab - shows motherboard manufacturer, model name, chipset, BIOS
version and graphic interface.
y Memory Tab - shows memory type, memory size, channels, memory frequency.
y SPD Tab - shows specifications relating to each memory module connected to the
motherboard, including the size, type and frequency.
y Graphics Tab - shows GPU name, code name, core speed, memory size, and
memory type.
y Bench Tab - allows you to run either a benchmark or a stress test on your processor.
y About Tab - shows the CPU-Z version, Windows version, DirectX version and allows
you to save the report file.

74 Software Description
RAID Configuration (optional)
Below are the different types of a RAID.
RAID 0 breaks the data into blocks which are written to separate hard drives.
Spreading the hard drive I/O load across independent channels greatly
improves I/O performance.
RAID 1 provides data redundancy by mirroring data between the hard drives and
provides enhanced read performance.
RAID 5 provides data striping at the byte level and also stripe error correction
information. This results in excellent performance and good fault tolerance.
RAID 10 uses four hard drives to create a combination of RAID 0 and 1 by forming a
RAID 0 array from two RAID 1 arrays.

RAID level comparison

RAID 0 RAID 1 RAID 5 RAID 10

Minimum # drives 2 2 3 4
Data protection None Excellent Excellent Excellent
Read performance Excellent OK Good OK
Write performance Excellent Good OK Good
Capacity utilization 100% 50% 67%~(1-1/n) 50%

Using Intel® Rapid Storage Technology Option ROM

First, you need to set the SATA mode to RAID in BIOS to create, delete and reset RAID
volumes. To enter the IRST Option ROM, reboot and press Ctrl + I keys to enter the
IRST Option ROM during the POST, the following window will appear.

[ [ MAIN
MAIN MENU ]]
1. Create RAID Volume 4. Recovery Volume Options
2. Delete RAID Volume 5. Acceleration Options
3. Reset Disks to Non-RAID 6. Exit
[ DISK / VOLUME INFORMATION ]
RAID Volumes :
None defined.

Physical Devices :
Port Device Model Serial # Size Type/Status (Vol ID)
1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB Non-RAID Disk
2 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB Non-RAID Disk

[ ↑↓] - Select [ESC] - Exit [ENTER] - Select Menu

Important
The following procedure is only available with a newly-built system or if you are
reinstalling your OS. It should not be used to migrate an existing system to RAID.

RAID Configuration (optional) 75

 Creating RAID Volume
1. Select option Create RAID Volume and press Enter key. The following screen
appears.
[ CREATE VOLUME MENU ]
Name : Volume0
RAID Level : RAID1(Mirror)
Disks : Select Disks
Strip Size : N/A
Capacity : XXX.X GB
Sync : N/A
Create Volume

[ HELP ]

RAID 1 : Mirrors data (redundancy) .

[ ↑↓] - Change [TAB] - Next [ESC] - Previous Menu [ENTER] - Select

2. Specify a RAID Volume name and then press the Tab or Enter key to go to the next
field
3. Use the ↑↓←→ arrow keys to select the RAID level best suited to your usage
model in RAID Level.
4. In the Disk field, press Enter key and use Space key to select the disks you want to
create for the RAID volume, then click Enter key to finish selection. This field will
become available according to the selected RAID level.
5. Select the strip size for the RAID array by using the ↑ upper arrow or ↓ down
arrow keys to scroll through the available values, and pressing the Enter key
to select and advance to the next field. The available values range from 4KB to
128 KB in power of 2 increments. The strip size should be chosen based on the
planned drive usage. Here are some typical values:
RAID0 -128KB / RAID10 - 64KB / RAID5 - 64KB.
6. Select the capacity of the volume in the Capacity field. The default value is the
maximum volume capacity of the selected disks.

Important
Since you want to create two volumes, this default size (maximum) needs to be
reduced. Type in a new size for the first volume. As an example: if you want the first
volume to span the first half of the two disks, re-type the size to be half of what is
shown by default. The second volume, when created, will automatically span the
remainder of two hard drives.
7. Go to the Create Volume field and press Enter, a WARNING message will appear
for you to confirm if you are sure to create the RAID volume. Press Y to continue.

76 RAID Configuration (optional)

Delete RAID Volume
Here you can delete the RAID volume, but please be noted that all data on RAID drives
will be lost.

Important
If your system currently boots to RAID and you delete the RAID volume in the IRST
Option ROM, your system will become unbootable.
Select option Delete RAID Volume from the main menu screen and press Enter key to
select a RAID volume for deletion. Then press Delete key to delete the selected RAID
volume. The following screen appears.
[ DELETE VOLUME MENU ]
Name Level Drives Capacity Status Bootable
Volume0 RAID1(Mirror) 2 XXX.XGB Normal Yes

[ DELETE VOLUME VERIFICATION ]

ALL DATA IN THE VOLUME WILL BE LOST!

(This does not apply to Recovery volumes)
HELP“Volume0”
Are you sure you want to[ delete ] ? (Y / N) :

Deleting a volume will reset the disks to non-RAID.

WARNING : ALL DISK DATA WILL BE DELETED.

(This does not apply to Recovery volumes)

[ ↑↓] - Select [ESC] - Previous Menu [DEL] - Delete Volume

Press Y key to accept the volume deletion.

Reset Disks to Non-RAID

Select option Reset Disks to Non-RAID from the main menu screen and press Enter
to delete the RAID volume and remove any RAID structures from the drives. Use the
Space key to select the disks and press Enter key. A confirmation sentence will appear
below, and then press Y key to accept the selection
[ MAIN MENU ]
1. Create RAID Volume 4. Recovery Volume Options
2. Delete RAID Volume [ RESET RAID DATA
4. ] Recovery Volume Options
Resetting RAID disk will 5. remove
Exit its RAID structures
and revert [it DISK
to a /non-RAID
VOLUME INFORMATION
disk. ]
RAID Volumes :WARNING : Resetting a disk causes all data on the disk to be lost.
None defined. (This does not apply to Recovery volumes)
PortDevices
Physical Drive : Model Serial # Size Status
1
Port Device XXXX-XXXXXXXX
Model Serial # XXXXXXXXXXXXXX XXX.XGB Member Disk
Size Type/Status (Vol ID)
2 XXXX-XXXXXXXXXXXXXXXXXXXXXX
1 XXXX-XXXXXXXX XXXXXXXXXXXXXX
XXX.XGB XXX.XGB Member
Non-RAID Disk Disk
2 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB Non-RAID Disk

Select the disks that should be reset.

[ ↑↓] - Previous/ Next [SPACE] - Selects [ENTER] - Selection Complete

[ ↑↓] - Select [ESC] - Exit [ENTER] - Select Menu

RAID Configuration (optional) 77

 Important
y You will lose all data on the RAID drives and any internal RAID structures when you
perform this operation.
y Possible reasons to Reset Disks to Non-RAID could include issues such as
incompatible RAID configurations or a failed volume or failed disk.

Recovery Volume Options

Select option Recovery Volume Options from the main menu screen and press Enter
to change recovery volume mode. The following screen appears:
[ RECOVERY VOLUME OPTIONS ]
1. Enable Only Recovery Disk
2. Enable Only Master Disk

[ HELP ]

Enable Only Recovery Disk - enables recovery disk if available and

disables master disk.
Enable Only Master Disk - enables master disk if available and
disables recovery disk.
Actions will result in change from Continuous Update mode to On-Request.

[ ↑↓] - select [ESC] - Previous Menu [ENTER] - Select

Recovery mode will change from Continuous Update to On-Request after you enable
Only Recovery Disk or Only Master Disk.

Degraded RAID Array

A RAID 1, RAID 5 or RAID 10 volume is reported as degraded when one of its hard
drive members fails or is temporarily disconnected, and data mirroring is lost. As a
result, the system can only utilize the remaining functional hard drive member. To
re-establish data mirroring and restore data redundancy, refer to the procedure below
that corresponds to the current situation.

RAID Volumes
ID Name Level Strip Size Status Bootable
0 Volume0 RAID 1(Mirror) N/A XXX.XGB Degraded Yes

Physical Disks:
Port Device Model Serial # Size Type/Status(Vol ID)
1 XXXXXXXXXXXXX XXXXXXXXXXXXX XXX.XGB Member Disk (0)
2 XXXXXXXXXXXXX XXXXXXXXXXXXX XXX.XGB Member Disk (0)

Press <CTRL-I> to enter Configuration Utility..

Missing Hard Drive Member

1. Power off.
2. Reconnect the hard drive.

78 RAID Configuration (optional)

3. Reboot to Windows®; the rebuild will occur automatically.

Failed Hard Drive Member

1. Power off.
2. Replace the failed hard drive with a new one that is of equal or greater capacity.
3. Reboot the system to IRST Option ROM by press Ctrl + I keys during the POST.
4. Select the port of the destination disk for rebuilding, and then press Enter.
[ MAIN MENU ]
1. Create RAID Volume 4. Recovery Volume Options
[ DEGRADED VOLUME DETECTED ]
2. Delete RAID Volume 4. Recovery Volume Options
“Degraded”volume and disk available for rebuilding detected. Selecting
5. Exit
a disk initiates a rebuild. Rebuild completes in the operating
[ DISK / VOLUME INFORMATION ] system.

RAID Volumes :
Select the port of the destination disk for rebuilding (ESC to exit):
None defined.
Port Drive Model Serial # Size
1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
Physical Devices :
Port Device Model Serial # Size Type/Status (Vol ID)

[ ↑↓] - Previous/ Next [ENTER] - Select [ESC] - Exit

1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB Non-RAID Disk
2 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB Non-RAID Disk

[ ↑↓] - Select [ESC] - Exit [ENTER] - Select Menu

5. Exit IRST Option ROM, reboot to Windows . ®

6. When prompted to rebuild the RAID volume, click Yes.

7. The Intel® Rapid Storage Technology application will be launched. Right-click
the new hard drive and select Rebuild to this Disk. The Rebuild Wizard will be
launched which will guide you through the process of rebuilding to the new hard
drive.

RAID Configuration (optional) 79

 Troubleshooting
Before sending the motherboard for RMA Lost BIOS password
repair, try to go over troubleshooting y Clear the CMOS, but that will cause
guide first to see if your got similar you to lose all customized settings in
symptoms as mentioned below. the BIOS.
The power is not on. There is no audio
y Connect the AC power cord to an y Adjust the volume.
electrical outlet securely.
y Connect the speakers/headphones to
y Check if all ATX power connectors audio ports on the motherboard rear
like ATX_PWR1, CPU_PWR1 are IO panel.
connected from the power supply to
the motherboard? y Remove secondary speakers/
headphones, HDMI cables, USB audio
y Some power supply units have a power devices.
button on the rear side, make sure the
button is turned on. y Test with another known working
speaker or headphone.
y Check if the power switch cable is
connected to JFP1 pin header properly. There is no network
y Verify the Clear CMOS jumper JBAT1 is y Make sure the network chipset driver
set to Keep DATA. has been installed.
y Test with another known working y Verify if the network cable is properly
power supply of equal or greater connected and make sure the LAN port
wattage. LEDs are properly illuminated.
The power is on, but no signal to y Verify your TCP/IP settings.
monitor y Restart or reset your router.
y Connect the monitor power cord to a y Test with another known working LAN
electrical outlet securely. cable.
y Make sure the monitor is turned on.
The USB device is not working
y Select different inputs on the monitor.
y Make sure your USB drive driver has
y If 3 long beeps are heard, remove all been installed.
memory modules and try to install only
y Verify if USB device is listed in
one memory module in the DIMMA2
Windows® Device Manager.
slot first and then restart the computer.
y Connect the USB device to other USB
y If 1 long 2 short beeps are heard,
port on the motherboard rear IO panel.
remove and reinstall the graphics card
and then restart the computer.
y Test with another known working
graphics card.

The computer does not boot after

updating the BIOS
y Clear the CMOS.
y Use the secondary BIOS to bootup the
system (Only for motherboard with
Dual BIOS)

80 Troubleshooting
Regulatory Notices
FCC Compliance Statement Battery Information
Note: This equipment has been tested and found to European Union:
comply with the limits for a Class B digital device, Batteries, battery packs, and
pursuant to part 15 of the FCC Rules. These limits accumulators should not be disposed of as
are designed to provide reasonable protection against unsorted household waste. Please use the
harmful interference in a residential installation. This public collection system to return, recycle,
equipment generates, uses and can radiate radio or treat them in compliance with the local
frequency energy and, if not installed and used in regulations.
accordance with the instructions, may cause harmful Taiwan:
interference to radio communications. However, there 廢電池請回收
is no guarantee that interference will not occur in a For better environmental protection, waste
particular installation. If this equipment does cause batteries should be collected separately
harmful interference to radio or television reception, for recycling or special disposal.
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the California, USA:
interference by one or more of the following measures: The button cell battery may contain
y Reorient or relocate the receiving antenna. perchlorate material and requires special
y Increase the separation between the equipment handling when recycled or disposed of in
and receiver. California.
y Connect the equipment into an outlet on a circuit For further information please visit:
different from that to which the receiver is http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
connected.
y Consult the dealer or an experienced radio/TV CAUTION: There is a risk of explosion, if battery is
technician for help. incorrectly replaced.
Caution: Changes or modifications not expressly Replace only with the same or equivalent type
approved by the party responsible for compliance could recommended by the manufacturer.
void the user’s authority to operate the equipment.
Chemical Substances Information
Tested to comply with FCC standards In compliance with chemical substances regulations,
FOR HOME OR OFFICE USE such as the EU REACH Regulation (Regulation EC
No. 1907/2006 of the European Parliament and the
This device complies with part 15 of the FCC Rules.
Council), MSI provides the information of chemical
Operation is subject to the following two conditions:
substances in products at:
(1) This device may not cause harmful interference, and
http://www.msi.com/html/popup/csr/evmtprtt_pcm.
(2) this device must accept any interference received,
html
including interference that may cause undesired
operation.

CE Conformity
Hereby, Micro-Star International CO., LTD
declares that this device is in compliance
with the essential safety requirements and
other relevant provisions set out in the European
Directive.

C-Tick Compliance

B급 기기 (가정용 방송통신기자재)
이 기기는 가정용(B급) 전자파적합기기로서 주
로 가정에서 사용하는 것을 목적으로 하며, 모
든 지역에서 사용할 수 있습니다.

クラスB情報技術装置
この装置は、クラスＢ情報技術装置です。この
装置は、家庭環境で使用することを目的として
いますが、この装置がラジオやテレビジョン受
信機に近接して使用されると、受信障害を引き起こすこと
があります。取扱説明書に従って
正しい取り扱いをして下さい
VCCI-B

Regulatory Notices 81
 WEEE (Waste Electrical and ESPAÑOL
MSI como empresa comprometida con la protección
Electronic Equipment) Statement del medio ambiente, recomienda:
ENGLISH Bajo la directiva 2002/96/EC de la Unión Europea
To protect the global environment and as en materia de desechos y/o equipos electrónicos,
an environmentalist, MSI must remind con fecha de rigor desde el 13 de agosto de 2005,
you that... los productos clasificados como “eléctricos y
Under the European Union (“EU”) equipos electrónicos” no pueden ser depositados
Directive on Waste Electrical and en los contenedores habituales de su municipio, los
Electronic Equipment, Directive 2002/96/ fabricantes de equipos electrónicos, están obligados
EC, which takes effect on August 13, a hacerse cargo de dichos productos al termino de
2005, products of “electrical and electronic equipment” su período de vida. MSI estará comprometido con los
cannot be discarded as municipal wastes anymore, and términos de recogida de sus productos vendidos en
manufacturers of covered electronic equipment will la Unión Europea al final de su periodo de vida. Usted
be obligated to take back such products at the end of debe depositar estos productos en el punto limpio
their useful life. MSI will comply with the product take establecido por el ayuntamiento de su localidad o
back requirements at the end of life of MSI-branded entregar a una empresa autorizada para la recogida de
products that are sold into the EU. You can return these estos residuos.
products to local collection points.
NEDERLANDS
DEUTSCH Om het milieu te beschermen, wil MSI u eraan
Hinweis von MSI zur Erhaltung und Schutz unserer herinneren dat….
Umwelt De richtlijn van de Europese Unie (EU) met betrekking
Gemäß der Richtlinie 2002/96/EG über Elektro- und tot Vervuiling van Electrische en Electronische
Elektronik-Altgeräte dürfen Elektro- und Elektronik- producten (2002/96/EC), die op 13 Augustus 2005 in
Altgeräte nicht mehr als kommunale Abfälle entsorgt zal gaan kunnen niet meer beschouwd worden als
werden. MSI hat europaweit verschiedene Sammel- vervuiling. Fabrikanten van dit soort producten worden
und Recyclingunternehmen beauftragt, die in die verplicht om producten retour te nemen aan het
Europäische Union in Verkehr gebrachten Produkte, eind van hun levenscyclus. MSI zal overeenkomstig
am Ende seines Lebenszyklus zurückzunehmen. de richtlijn handelen voor de producten die de
Bitte entsorgen Sie dieses Produkt zum gegebenen merknaam MSI dragen en verkocht zijn in de EU. Deze
Zeitpunkt ausschliesslich an einer lokalen goederen kunnen geretourneerd worden op lokale
Altgerätesammelstelle in Ihrer Nähe. inzamelingspunten.

FRANÇAIS SRPSKI
En tant qu’écologiste et afin de protéger Da bi zaštitili prirodnu sredinu, i kao preduzeće koje
l’environnement, MSI tient à rappeler ceci... vodi računa o okolini i prirodnoj sredini, MSI mora da
Au sujet de la directive européenne (EU) relative aux vas podesti da…
déchets des équipement électriques et électroniques, Po Direktivi Evropske unije (“EU”) o odbačenoj
directive 2002/96/EC, prenant effet le 13 août 2005, que ekektronskoj i električnoj opremi, Direktiva 2002/96/
les produits électriques et électroniques ne peuvent EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi
être déposés dans les décharges ou tout simplement koji spadaju pod “elektronsku i električnu opremu”
mis à la poubelle. Les fabricants de ces équipements ne mogu više biti odbačeni kao običan otpad i
seront obligés de récupérer certains produits en fin proizvođači ove opreme biće prinuđeni da uzmu natrag
de vie. MSI prendra en compte cette exigence relative ove proizvode na kraju njihovog uobičajenog veka
au retour des produits en fin de vie au sein de la trajanja. MSI će poštovati zahtev o preuzimanju ovakvih
communauté européenne. Par conséquent vous pouvez proizvoda kojima je istekao vek trajanja, koji imaju MSI
retourner localement ces matériels dans les points de oznaku i koji su prodati u EU. Ove proizvode možete
collecte. vratiti na lokalnim mestima za prikupljanje.

РУССКИЙ POLSKI
Компания MSI предпринимает активные действия Aby chronić nasze środowisko naturalne oraz jako
по защите окружающей среды, поэтому напоминаем firma dbająca o ekologię, MSI przypomina, że...
вам, что.... Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą
В соответствии с директивой Европейского odpadów produktów elektrycznych i elektronicznych
Союза (ЕС) по предотвращению загрязнения (Dyrektywa 2002/96/EC), która wchodzi w życie 13
окружающей среды использованным электрическим sierpnia 2005, tzw. “produkty oraz wyposażenie
и электронным оборудованием (директива elektryczne i elektroniczne “ nie mogą być traktowane
WEEE 2002/96/EC), вступающей в силу 13 jako śmieci komunalne, tak więc producenci tych
августа 2005 года, изделия, относящиеся к produktów będą zobowiązani do odbierania ich w
электрическому и электронному оборудованию, momencie gdy produkt jest wycofywany z użycia.
не могут рассматриваться как бытовой мусор, MSI wypełni wymagania UE, przyjmując produkty
поэтому производители вышеперечисленного (sprzedawane na terenie Unii Europejskiej) wycofywane
электронного оборудования обязаны принимать z użycia. Produkty MSI będzie można zwracać w
его для переработки по окончании срока службы. wyznaczonych punktach zbiorczych.
MSI обязуется соблюдать требования по приему
продукции, проданной под маркой MSI на территории
EC, в переработку по окончании срока службы. Вы
можете вернуть эти изделия в специализированные
пункты приема.

82 Regulatory Notices
TÜRKÇE 日本JIS C 0950材質宣言
Çevreci özelliğiyle bilinen MSI dünyada çevreyi
korumak için hatırlatır: 日本工業規格JIS C 0950により、2006年7月1日以降に販
Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik 売される特定分野の電気および電子機器について、製造
Malzeme Atığı, 2002/96/EC Kararnamesi altında 13 者による含有物質の表示が義務付けられます。
Ağustos 2005 tarihinden itibaren geçerli olmak üzere, http://www.msi.com/html/popup/csr/cemm_jp.html
elektrikli ve elektronik malzemeler diğer atıklar http://tw.msi.com/html/popup/csr_tw/cemm_jp.html
gibi çöpe atılamayacak ve bu elektonik cihazların
üreticileri, cihazların kullanım süreleri bittikten sonra India RoHS
ürünleri geri toplamakla yükümlü olacaktır. Avrupa This product complies with the“India E-waste
Birliği’ne satılan MSI markalı ürünlerin kullanım (Management and Handling) Rule 2011”and
süreleri bittiğinde MSI ürünlerin geri alınması isteği ile prohibits use of lead, mercury, hexavalent chromium,
işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama polybrominated biphenyls or polybrominated diphenyl
noktalarına bırakabilirsiniz. ethers in concentrations exceeding 0.1 weight % and
0.01 weight % for cadmium, except for the exemptions
ČESKY set in Schedule 2 of the Rule.
Záleží nám na ochraně životního prostředí - společnost
MSI upozorňuje...
Podle směrnice Evropské unie (“EU”) o likvidaci Türkiye EEE yönetmeli i
elektrických a elektronických výrobků 2002/96/ Türkiye Cumhuriyeti: EEE Yönetmeli ine Uygundur
EC platné od 13. srpna 2005 je zakázáno likvidovat
“elektrické a elektronické výrobky” v běžném Україна обмеження на наявність
komunálním odpadu a výrobci elektronických
výrobků, na které se tato směrnice vztahuje, budou небезпечних речовин
povinni odebírat takové výrobky zpět po skončení Обладнання відповідає вимогам Технічного
jejich životnosti. Společnost MSI splní požadavky na регламенту щодо обмеження використання
odebírání výrobků značky MSI, prodávaných v zemích деяких небезпечних речовин в електричному та
EU, po skončení jejich životnosti. Tyto výrobky můžete електронному обладнані, затвердженого постановою
odevzdat v místních sběrnách. Кабінету Міністрів України від 3 грудня 2008 № 1057.

MAGYAR
Annak érdekében, hogy környezetünket megvédjük,
Việt Nam RoHS
illetve környezetvédőként fellépve az MSI emlékezteti Kể từ ngày 01/12/2012, tất cả các sản phẩm do công
Önt, hogy ... ty MSI sản xuất tuân thủ Thông tư số 30/2011/TT-BCT
Az Európai Unió („EU”) 2005. augusztus 13-án hatályba quy định tạm thời về giới hạn hàm lượng cho phép của
lépő, az elektromos és elektronikus berendezések một số hóa chất độc hại có trong các sản phẩm điện,
hulladékairól szóló 2002/96/EK irányelve szerint điện tử”
az elektromos és elektronikus berendezések
többé nem kezelhetőek lakossági hulladékként, Environmental Policy
és az ilyen elektronikus berendezések gyártói
y The product has been designed to
kötelessé válnak az ilyen termékek visszavételére
enable proper reuse of parts and
azok hasznos élettartama végén. Az MSI betartja a
recycling and should not be thrown
termékvisszavétellel kapcsolatos követelményeket
away at its end of life.
az MSI márkanév alatt az EU-n belül értékesített
y Users should contact the local
termékek esetében, azok élettartamának végén. Az
authorized point of collection for
ilyen termékeket a legközelebbi gyűjtőhelyre viheti.
recycling and disposing of their end-of-life products.
y Visit the MSI website and locate a nearby distributor
ITALIANO
for further recycling information.
Per proteggere l’ambiente, MSI, da sempre amica della
y Users may also reach us at gpcontdev@msi.com for
natura, ti ricorda che….
information regarding proper Disposal, Take-back,
In base alla Direttiva dell’Unione Europea (EU) sullo
Recycling, and Disassembly of MSI products.
Smaltimento dei Materiali Elettrici ed Elettronici,
Direttiva 2002/96/EC in vigore dal 13 Agosto 2005,
prodotti appartenenti alla categoria dei Materiali
Elettrici ed Elettronici non possono più essere eliminati
come rifiuti municipali: i produttori di detti materiali
saranno obbligati a ritirare ogni prodotto alla fine
del suo ciclo di vita. MSI si adeguerà a tale Direttiva
ritirando tutti i prodotti marchiati MSI che sono stati
venduti all’interno dell’Unione Europea alla fine del
loro ciclo di vita. È possibile portare i prodotti nel più
vicino punto di raccolta

Regulatory Notices 83
 产品中有害物质的名称及含量

有害物质

部件名称
铅 汞 镉 六价铬 多溴联苯 多溴二苯醚
(Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE)

印刷电路板组件* X O O O O O

电池** X O O O O O

外部信号连接头 X O O O O O

线材 X O O O O O

本表格依据 SJ/T 11364 的规定编制。

O: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。
X: 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求，但所有部件都符合欧盟
RoHS要求。
* 印刷电路板组件: 包括印刷电路板及其构成的零部件。
** 电池本体上如有环保使用期限标识，以本体标识为主。
■ 上述有毒有害物质或元素清单会依型号之部件差异而有所增减。
■ 產品部件本体上如有环保使用期限标识，以本体标识为主。

Copyright Revision History

Micro-Star Int’l Co.,Ltd. Version 1.0, 2016/10, First release.
Copyright © 2016 All rights reserved.

The material in this document is the intellectual

property of Micro-Star Int’l Co.,Ltd. We take every care
in the preparation of this document, but no guarantee
is given as to the correctness of its contents. Our
products are under continual improvement and we
reserve the right to make changes without notice.

Technical Support
If a problem arises with your system and no solution
can be obtained from the user guide, please
contact your place of purchase or local distributor.
Alternatively, please try the following help resources
for further guidance.
y Visit the MSI website for technical guide, BIOS
updates, driver updates, and other information:
http://www.msi.com
y Register your product at: http://register.msi.com

Trademark Recognition
All product names used in this manual are the
properties of their respective owners and are
acknowledged.

84 Regulatory Notices