Quick Start

Thank you for purchasing the MSI® MAG B365M MORTAR motherboard. This Quick
Start section provides demonstration diagrams about how to install your computer.
Some of the installations also provide video demonstrations. Please link to the URL to
watch it with the web browser on your phone or tablet. You may have even link to the
URL by scanning the QR code.

Preparing Tools and Components

Intel® LGA 1151 CPU

CPU Fan

Chassis

DDR4 Memory

Power Supply Unit

Graphics Card

Thermal Paste

SATA Hard Disk Drive

SATA DVD Drive

Phillips Screwdriver A Package of Screws

Quick Start 1
 Safety Information
y The components included in this package are prone to damage from electrostatic
discharge (ESD). Please adhere to the following instructions to ensure successful
computer assembly.
y Ensure that all components are securely connected. Loose connections may cause
the computer to not recognize a component or fail to start.
y Hold the motherboard by the edges to avoid touching sensitive components.
y It is recommended to wear an electrostatic discharge (ESD) wrist strap when
handling the motherboard to prevent electrostatic damage. If an ESD wrist strap is
not available, discharge yourself of static electricity by touching another metal object
before handling the motherboard.
y Store the motherboard in an electrostatic shielding container or on an anti-static pad
whenever the motherboard is not installed.
y Before turning on the computer, ensure that there are no loose screws or metal
components on the motherboard or anywhere within the computer case.
y Do not boot the computer before installation is completed. This could cause
permanent damage to the components as well as injury to the user.
y If you need help during any installation step, please consult a certified computer
technician.
y Always turn off the power supply and unplug the power cord from the power outlet
before installing or removing any computer component.
y Keep this user guide for future reference.
y Keep this motherboard away from humidity.
y Make sure that your electrical outlet provides the same voltage as is indicated on the
PSU, before connecting the PSU to the electrical outlet.
y Place the power cord such a way that people can not step on it. Do not place anything
over the power cord.
y All cautions and warnings on the motherboard should be noted.
y If any of the following situations arises, get the motherboard checked by service
personnel:
ƒ Liquid has penetrated into the computer.
ƒ The motherboard has been exposed to moisture.
ƒ The motherboard does not work well or you can not get it work according to user
guide.
ƒ The motherboard has been dropped and damaged.
ƒ The motherboard has obvious sign of breakage.
y Do not leave this motherboard in an environment above 60°C (140°F), it may damage
the motherboard.

2 Quick Start
Installing a Processor
2

https://youtu.be/4ce91YC3Oww 1

7
4 5 9
6

Quick Start 3
 Installing DDR4 memory

http://youtu.be/T03aDrJPyQs

DIMMA1
DIMMA2 DIMMA2 DIMMA2
DIMMB2 DIMMB1
DIMMB2

4 Quick Start
Connecting the Front Panel Header

http://youtu.be/DPELIdVNZUI

-
LED
ER W
+ PO
ED
RL E
OW P
ED
DL
W

HD
RS
WE
PO
W
TS
SE
RE

Power LED Power Switch

+
+
-
-

2 10
RESET SW

JFP1 1 9
HDD LED

Reserved
+

+
-
-

HDD LED Reset Switch

1 HDD LED + 2 Power LED +

3 HDD LED - 4 Power LED -

5 Reset Switch 6 Power Switch

7 Reset Switch 8 Power Switch JFP1

9 Reserved 10 No Pin

HDD LED -
HDD LED
HDD LED +

POWER LED -
POWER LED
POWER LED +

Quick Start 5
 Installing the Motherboard

BAT1

6 Quick Start
Connecting the Power Connectors

http://youtu.be/gkDYyR_83I4

ATX_PWR1
CPU_PWR1

Quick Start 7
 Installing SATA Drives

http://youtu.be/RZsMpqxythc
1

2
3

8 Quick Start
Installing a Graphics Card

http://youtu.be/mG0GZpr9w_A

3 2

Quick Start 9
 Connecting Peripheral Devices

10 Quick Start
Power On

1 2

Quick Start 11
 Contents
Quick Start ............................................................................................................. 1
Preparing Tools and Components .......................................................................... 1
Safety Information .................................................................................................. 2
Installing a Processor ............................................................................................. 3
Installing DDR4 memory ........................................................................................ 4
Connecting the Front Panel Header ....................................................................... 5
Installing the Motherboard ..................................................................................... 6
Connecting the Power Connectors......................................................................... 7
Installing SATA Drives............................................................................................. 8
Installing a Graphics Card ...................................................................................... 9
Connecting Peripheral Devices ............................................................................ 10
Power On............................................................................................................... 11
Specifications....................................................................................................... 14
Package contents ................................................................................................ 18
Block Diagram .................................................................................................... 19
Rear I/O Panel ..................................................................................................... 20
LAN Port LED Status Table................................................................................... 20
Audio 7.1-channel Configuration ......................................................................... 20
Realtek Audio Console ......................................................................................... 21
Overview of Components .................................................................................... 22
CPU Socket ........................................................................................................... 24
DIMM Slots............................................................................................................ 25
PCI_E1~3: PCIe Expansion Slots .......................................................................... 26
M2_1: M.2 Slot (Key M) ......................................................................................... 26
SATA1~6: SATA 6Gb/s Connectors ....................................................................... 27
JFP1, JFP2: Front Panel Connectors ................................................................... 27
CPU_PWR1, ATX_PWR1: Power Connectors ....................................................... 28
CPU_FAN1, SYS_FAN1~2: Fan Connectors .......................................................... 29
JUSB3: USB 3.1 Gen1 Connector ......................................................................... 30
JUSB1~2: USB 2.0 Connectors ............................................................................. 30
JAUD1: Front Audio Connector ............................................................................ 31
JCOM1: Serial Port Connector ............................................................................. 31
JLPT1: Parallel Port Connector ........................................................................... 31
JCI1: Chassis Intrusion Connector ....................................................................... 32
JBAT1: Clear CMOS (Reset BIOS) Jumper ........................................................... 33
EZ Debug LED ....................................................................................................... 33
JRGB1: RGB LED connector ................................................................................. 34

12 Contents
 JRAINBOW1: Addressable RGB LED connectors ................................................. 35
Installing OS, Drivers & Utilities ......................................................................... 36
Installing Windows® 10 ......................................................................................... 36
Installing Drivers .................................................................................................. 36
Installing Utilities ................................................................................................. 36
BIOS Setup ........................................................................................................... 37
Entering BIOS Setup ............................................................................................. 37
Resetting BIOS...................................................................................................... 38
Updating BIOS....................................................................................................... 38
EZ Mode ................................................................................................................ 39
Advanced Mode .................................................................................................... 41
SETTINGS.............................................................................................................. 42
Advanced ............................................................................................................... 42
Boot ....................................................................................................................... 48
Security ................................................................................................................. 49
Save & Exit ............................................................................................................ 50
OC.......................................................................................................................... 51
M-FLASH .............................................................................................................. 57
OC PROFILE .......................................................................................................... 58
HARDWARE MONITOR .......................................................................................... 59
Intel Optane™ Memory Configuration .............................................................. 60
®

System Requirements ......................................................................................... 60

Installing the Intel® Optane™ memory ................................................................ 60
Removing the Intel® Optane™ memory ............................................................... 62
Troubleshooting .................................................................................................. 63
Regulatory Notices .............................................................................................. 64

Contents 13
 Specifications
Supports 9th/ 8th Gen Intel® Core™/ Pentium® Gold/
CPU
Celeron® processors for LGA 1151 socket

Chipset Intel® B365 Chipset

y 4x DDR4 memory slots, support up to 64GB

y Supports DDR4 2666/ 2400/ 2133 MHz
y Supports Dual-Channel mode
Memory
y Supports non-ECC, un-buffered memory
y Supports Intel® Extreme Memory Profile (XMP)
* Please refer www.msi.com for more information on compatible memory.

y 1x PCIe 3.0 x16 slot

Expansion Slot
y 2x PCIe 3.0 x1 slots

y 1x HDMI™ port 1.4, supports a maximum resolution of

Onboard Graphics
4096x2160@30Hz

Intel® B365 Chipset

y 6x SATA 6Gb/s ports*
y 1x M.2 slot (Key M)
ƒ Supports up to PCIe 3.0 x4 and SATA 6Gb/s, 2242/ 2260/
Storage 2280/ 22110 storage devices
ƒ Intel® Optane™ Memory Ready**
* SATA1 port will be unavailable when installing SATA M.2 SSD in M.2 slot.
** Before using Intel® Optane™ memory modules, please ensure that you have
updated the drivers and BIOS to the latest version from MSI website.

Intel® B365 Chipset

y 6x USB 3.1 Gen1 (SuperSpeed USB) ports (4 ports on
the back panel, 2 ports available through the internal USB
USB connector)
y 6x USB 2.0 (High-speed USB) ports (2 ports on the
back panel, 4 ports available through the internal USB
connectors)

y Realtek® ALC892 Codec

Audio
y 7.1-Channel High Definition Audio

LAN 1x Intel I219-V Gigabit LAN controller

Continued on next page

14 Specifications
 Continued from previous page

y 1x PS/2 mouse port

y 1x PS/2 keyboard port
y 2x USB 2.0 ports

Back Panel y 1x HDMI port

Connectors y 1x LAN (RJ45) port
y 3x USB 3.1 Gen1 Type-A ports
y 1x USB 3.1 Gen1 Type-C port
y 3x audio jacks

y 1x 24-pin ATX main power connector

y 1x 8-pin ATX 12V power connector
y 6x SATA 6Gb/s connectors
y 1x USB 3.1 Gen1 connector (supports additional 2 USB 3.1
Gen1 ports)
y 2x USB 2.0 connectors (support additional 4 USB 2.0 ports)
y 1x 4-pin CPU fan connector
y 2x 4-pin system fan connectors

Internal Connectors y 1x Front panel audio connector

y 2x Front panel connectors
y 1x Serial port connector
y 1x Parallel port connector
y 1x 3-pin RAINBOW LED connector
y 1x 4-pin RGB LED connector
y 1x TPM module connector
y 1x Chassis Intrusion connector
y 1x Clear CMOS jumper

I/O Controller NUVOTON NCT6797 Controller Chip

y CPU/System temperature detection

Hardware Monitor y CPU/System fan speed detection
y CPU/System fan speed control

y Micro-ATX Form Factor

Form Factor
y 9.6 in. x 9.6 in. (24.3 cm x 24.3 cm)

Continued on next page

Specifications 15
 Continued from previous page

y 1x 128 Mb flash
y UEFI AMI BIOS
BIOS Features
y ACPI 6.1, SMBIOS 2.8
y Multi-language

y Drivers
y DRAGON CENTER
y CPU-Z MSI GAMING
Software
y MSI App Player (BlueStacks)
y Google Chrome™ ,Google Toolbar, Google Drive
y Norton™ Internet Security Solution

y GRAGON OPTIMIZATION
y Hardware Monitor

Dragon Center y Eyerest

Features y LAN Manager
Please refer to
y Mystic Light http://download.msi.com/manual/
mb/DRAGONCENTER2.pdf
y Live Update for more details.

y Audio
ƒ Audio Boost
y Network
ƒ GAMING LAN with Gaming LAN Manager
y Storage
ƒ Turbo M.2
ƒ Intel® Optane Memory Ready
Special Features y Fan
ƒ Smart Fan Control
y LED
ƒ Mystic Light
ƒ Mystic Light (RGB)
ƒ Mystic Light (RAINBOW)
ƒ Mystic light SYNC
ƒ EZ DEBUG LED

Continued on next page

16 Specifications
 Continued from previous page

y Protection
ƒ PCIe Steel Armor
ƒ Pre-install IO
y Performance
ƒ DDR4 Boost
ƒ Core Boost
ƒ USB with type A+C
y Stability
ƒ 7000+ Quality Test
Special Features y VR
ƒ VR Ready
y Gamer Experience
ƒ GAMING HOTKEY
ƒ GAMING MOUSE Control
ƒ APP Player
y BIOS
ƒ Click BIOS 5
y Certification
ƒ GAMING Certified

Specifications 17
 Package contents
Please check the contents of your motherboard package. It should contain:

Motherboard MAG B365M MORTAR

SATA 6Gb/s Cables 2
Cable
RGB LED Extension Cable 80cm 1
8.5H M.2 screws 1
Case Badge 1
Product Registration Card 1
Application DVD Driver DVD 1
User Manual 1
Documentation
Quick Installation Guide 1

Important
If any of the above items are damaged or missing, please contact your retailer.

18 Package contents
Block Diagram

HDMI

2 Channel DDR4 Memory

CPU

PCI Express Bus

x1
PCIe x1 slot
x1
PCIe x1 slot
1 x M.2

Switch
PCI-E Bus
PCI Express Bus

6 x SATA 6Gb/s

B365
6 x USB 3.1 Gen1

6 x USB 2.0

LPC Bus

NV6797 Realtek
Super I/O ALC892

P/S2 Mouse / Keyboard Audio Jacks

Block Diagram 19
 Rear I/O Panel
PS/2 Mouse LAN
Line-In

Line-Out

Mic-In

PS/2 Keyboard USB 3.1 Gen 1 Type-A

USB 2.0 USB 3.1 Gen 1 Type-C

LAN Port LED Status Table

Link/ Activity LED Speed LED
Status Description Status Description

Off No link Off 10 Mbps connection

Yellow Linked Green 100 Mbps connection

Blinking Data activity Orange 1 Gbps connection

Audio 7.1-channel Configuration

To configure 7.1-channel audio, you have to connect front audio I/O module to JAUD1
connector and follow the below steps.
1. Click on the Realtek Audio Console > Advanced Settings to open the dialog below.

2. Select Mute the rear output device, when a front headphone plugged in.
3. Plug your speakers to audio jacks on rear and front I/O panel. When you plug into
a device at an audio jack, a dialogue window will pop up asking you which device is
current connected.

20 Rear I/O Panel

Realtek Audio Console
After Realtek Audio Console is installed. You can use it to change sound settings to get
better sound experience.
Application Enhancement

Device
Selection

Main Volume

Connector Settings Jack Status

y Device Selection - allows you to select a audio output source to change the related
options. The check sign indicates the devices as default.
y Application Enhancement - the array of options will provide you a complete guidance
of anticipated sound effect for both output and input device.
y Main Volume - controls the volume or balance the right/left side of the speakers that
you plugged in front or rear panel by adjust the bar.
y Jack Status - depicts all render and capture devices currently connected with your
computer.
y Connector Settings - configures the connection settings.

Auto popup dialog

When you plug into a device at an audio jack, a dialogue window will pop up asking you
which device is current connected.

Each jack corresponds to its default setting as shown on the next page.
Important
The pictures above for reference only and may vary from the product you purchased.

Rear I/O Panel 21

 Overview of Components

CPU Socket

CPU_FAN1
DIMMA1
DIMMA2
CPU_PWR1 DIMMB1
DIMMB2

SYS_FAN2

EZ Debug LEDs

ATX_PWR1

SYS_FAN1
BAT1

JUSB3

PCI_E1 M2_1

SATA▼1▲2
JTPM1
SATA▼3▲4
PCI_E2
SATA6
PCI_E3 SATA5
JFP1

JAUD1
JRGB1
JFP2
JCOM1 JRAINBOW1
JBAT1 JCI1
JLPT1 JUSB2

JUSB1

22 Overview of Components
Component Contents

Port Name Port Type Page

CPU_FAN1, SYS_FAN1~2 Fan Connectors 29

CPU_PWR1, ATX_PWR1 Power Connectors 28

CPU Socket LGA 1151 socket 24

DIMMA1/A2/B1/B2 DIMM Slots 25

JAUD1 Front Audio Connector 31

JBAT1 Clear CMOS Jumper 33

JCI1 Chassis Intrusion Connector 32

JCOM1 Serial Port Connector 31

JFP1, JFP2 Front Panel Connectors 27

JLPT1 Parallel Port Connector 31

JRAINBOW1 Addressable RGB LED connectors 35

JRGB1 RGB LED connector 34

JUSB1~2 USB 2.0 Connectors 30

JUSB3 USB 3.1 Gen1 Connector 30

M2_1 M.2 Slot (Key M) 26

PCI_E1~3 PCIe Expansion Slots 26

SATA1~6 SATA 6Gb/s Connectors 27

Overview of Components 23
 CPU Socket

Distance from the center of the

CPU to the nearest DIMM slot.

50.77 mm

Introduction to the LGA 1151 CPU

The surface of the LGA 1151 CPU has
two notches and a golden triangle to
assist in correctly lining up the CPU for
motherboard placement. The golden
triangle is the Pin 1 indicator.

Important
y Always unplug the power cord from the power outlet before installing or removing
the CPU.
y Please retain the CPU protective cap after installing the processor. MSI will deal with
Return Merchandise Authorization (RMA) requests if only the motherboard comes with
the protective cap on the CPU socket.
y When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink
is necessary to prevent overheating and maintain system stability.
y Confirm that the CPU heatsink has formed a tight seal with the CPU before booting
your system.
y Overheating can seriously damage the CPU and motherboard. Always make sure
the cooling fans work properly to protect the CPU from overheating. Be sure to apply
an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to
enhance heat dissipation.
y Whenever the CPU is not installed, always protect the CPU socket pins by covering
the socket with the plastic cap.
y If you purchased a separate CPU and heatsink/ cooler, Please refer to the
documentation in the heatsink/ cooler package for more details about installation.
y This motherboard is designed to support overclocking. Before attempting to
overclock, please make sure that all other system components can tolerate
overclocking. Any attempt to operate beyond product specifications is not
recommended. MSI® does not guarantee the damages or risks caused by inadequate
operation beyond product specifications.

24 Overview of Components
DIMM Slots

DIMMA1 DIMMB1

Channel A Channel B

DIMMA2 DIMMB2

Memory module installation recommendation

DIMMA1
DIMMA2 DIMMA2
DIMMA2
DIMMB1
DIMMB2 DIMMB2

Important
y Always insert memory modules in the DIMMA2 slot first.
y Due to chipset resource usage, the available capacity of memory will be a little less
than the amount of installed.
y Based on CPU specification, the Memory DIMM voltage below 1.35V is suggested to
protect the CPU.
y Please note that the maximum capacity of addressable memory is 4GB or less
for 32-bit Windows OS due to the memory address limitation. Therefore, we
recommended that you to install 64-bit Windows OS if you want to install more than
4GB memory on the motherboard.
y Some memory may operate at a lower frequency than the marked value when
overclocking due to the memory frequency operates dependent on its Serial Presence
Detect (SPD). Go to BIOS and find the Memory Try It! to set the memory frequency if
you want to operate the memory at the marked or at a higher frequency.
y It is recommended to use a more efficient memory cooling system for full DIMMs
installation or overclocking.
y The stability and compatibility of installed memory module depend on installed CPU
and devices when overclocking.

Overview of Components 25
 PCI_E1~3: PCIe Expansion Slots

BAT1
PCI_E1: PCIe 3.0 x16 (CPU lanes)

PCI_E2: PCIe 3.0 x1 (PCH lanes)

PCI_E3: PCIe 3.0 x1 (PCH lanes)

Important
y If you install a large and heavy graphics card, you need to use a tool such as MSI
Gaming Series Graphics Card Bolster to support its weight to prevent deformation of
the slot.
y When adding or removing expansion cards, always turn off the power supply and
unplug the power supply power cable from the power outlet. Read the expansion
card’s documentation to check for any necessary additional hardware or software
changes.

M2_1: M.2 Slot (Key M)

Video Demonstration
Watch the video to learn how to Install M.2
module.
http://youtu.be/JCTFABytrYA

M.2 Slot Installation

1. Move and fasten the M.2 standoff to the appropriate location for your M.2 SSD.
2. Insert your M.2 SSD into the M.2 slot at a 30-degree angle.
3. Secure the M.2 SSD in place with the 8.5H M.2 screw provided with motherboard
package.

8.5H M.2 screw 30º

3
M.2 standoff
1

26 Overview of Components
SATA1~6: SATA 6Gb/s Connectors
These connectors are SATA 6Gb/s interface ports. Each connector can connect to one
SATA device.

SATA2
SATA1
SATA4
SATA3
SATA6
SATA5

Important
y Please do not fold the SATA cable at a 90-degree angle. Data loss may result during
transmission otherwise.
y SATA cables have identical plugs on either sides of the cable. However, it is
recommended that the flat connector be connected to the motherboard for space
saving purposes.
y SATA1 port will be unavailable when installing SATA M.2 SSD in M.2 slot.

JFP1, JFP2: Front Panel Connectors

These connectors connect to the switches and LEDs on the front panel.

Power LED Power Switch

+
+
-
-

2 10
JFP1
1 9
Reserved
+

+
-
-

HDD LED Reset Switch

1 HDD LED + 2 Power LED +

3 HDD LED - 4 Power LED -

5 Reset Switch 6 Power Switch

7 Reset Switch 8 Power Switch

9 Reserved 10 No Pin

Buzzer 1 Speaker - 2 Buzzer +

+
-

JFP2 1
+
-

Speaker 3 Buzzer - 4 Speaker +

Overview of Components 27
 CPU_PWR1, ATX_PWR1: Power Connectors
These connectors allow you to connect an ATX power supply.

8 5
CPU_PWR1
4 1

1 Ground 5 +12V

2 Ground 6 +12V

3 Ground 7 +12V

4 Ground 8 +12V

1 +3.3V 13 +3.3V

2 +3.3V 14 -12V

3 Ground 15 Ground

12 24 4 +5V 16 PS-ON#

5 Ground 17 Ground

6 +5V 18 Ground
ATX_PWR1
7 Ground 19 Ground

8 PWR OK 20 Res

1 13 9 5VSB 21 +5V

10 +12V 22 +5V

11 +12V 23 +5V

12 +3.3V 24 Ground

Important
Make sure that all the power cables are securely connected to a proper ATX power
supply to ensure stable operation of the motherboard.

28 Overview of Components
CPU_FAN1, SYS_FAN1~2: Fan Connectors
Fan connectors can be classified as PWM (Pulse Width Modulation) Mode or DC Mode.
PWM Mode fan connectors provide constant 12V output and adjust fan speed with
speed control signal. DC Mode fan connectors control fan speed by changing voltage.
You can follow the instruction below to adjust the fan connector to PWM or DC Mode.
CPU_FAN1 is the auto-detection mode fan connector, the system will auto detect the
fan mode.

1 1

CPU_FAN1 SYS_FAN1
(Auto-detection Mode) (Default DC mode)

SYS_FAN2
(Default DC mode)

Switching fan mode and adjusting fan speed

You can switch between PWM mode and DC mode and adjust fan speed in BIOS >
HARDWARE MONITOR.
Select PWM mode or DC mode

There are gradient points of the fan speed that allow you to adjust
fan speed in relation to CPU temperature.

Important
Make sure fans are working properly after switching the PWM/ DC mode.

Pin definition of fan connectors

PWM Mode pin definition DC Mode pin definition

1 Ground 2 +12V 1 Ground 2 Voltage Control

3 Sense 4 Speed Control Signal 3 Sense 4 NC

Overview of Components 29
 JUSB3: USB 3.1 Gen1 Connector
This connector allows you to connect USB 3.1 Gen1 ports on the front panel.

10 11

1 20

1 Power 11 USB2.0+

2 USB3_RX_DN 12 USB2.0-

3 USB3_RX_DP 13 Ground

4 Ground 14 USB3_TX_C_DP

5 USB3_TX_C_DN 15 USB3_TX_C_DN

6 USB3_TX_C_DP 16 Ground

7 Ground 17 USB3_RX_DP

8 USB2.0- 18 USB3_RX_DN

9 USB2.0+ 19 Power

10 NC 20 No Pin

Important
Note that the Power and Ground pins must be connected correctly to avoid possible
damage.

JUSB1~2: USB 2.0 Connectors

These connectors allow you to connect USB 2.0 ports on the front panel.
2 10

1 9

1 VCC 2 VCC

3 USB0- 4 USB1-

5 USB0+ 6 USB1+

7 Ground 8 Ground

9 No Pin 10 NC

Important
y Note that the VCC and Ground pins must be connected correctly to avoid possible
damage.
y In order to recharge your iPad,iPhone and iPod through USB ports, please install
MSI® DRAGON CENTER utility.

30 Overview of Components
JAUD1: Front Audio Connector
This connector allows you to connect audio jacks on the front panel.

2 10

1 9

1 MIC L 2 Ground

3 MIC R 4 NC

5 Head Phone R 6 MIC Detection

7 SENSE_SEND 8 No Pin

9 Head Phone L 10 Head Phone Detection

JCOM1: Serial Port Connector

This connector allows you to connect the optional serial port with bracket.

2 10

1 9

1 DCD 2 SIN

3 SOUT 4 DTR

5 Ground 6 DSR

7 RTS 8 CTS

9 RI 10 No Pin

JLPT1: Parallel Port Connector

This connector allows you to connect the optional parallel port with bracket.

2 26

1 25

1 RSTB# 2 AFD# 3 PRND0

4 ERR# 5 PRND1 6 PINIT#

7 PRND2 8 LPT_SLIN# 9 PRND3

10 Ground 11 PRND4 12 Ground

13 PRND5 14 Ground 15 PRND6

16 Ground 17 PRND7 18 Ground

19 ACK# 20 Ground 21 BUSY

22 Ground 23 PE 24 Ground

25 SLCT 26 No Pin

Overview of Components 31
 JCI1: Chassis Intrusion Connector
This connector allows you to connect the chassis intrusion switch cable.

Normal Trigger the chassis

intrusion event
(default)

Using chassis intrusion detector

1. Connect the JCI1 connector to the chassis intrusion switch/ sensor on the chassis.
2. Close the chassis cover.
3. Go to BIOS > SETTINGS > Security > Chassis Intrusion Configuration.
4. Set Chassis Intrusion to Enabled.
5. Press F10 to save and exit and then press the Enter key to select Yes.
6. Once the chassis cover is opened again, a warning message will be displayed on
screen when the computer is turned on.

Resetting the chassis intrusion warning

1. Go to BIOS > SETTINGS > Security > Chassis Intrusion Configuration.
2. Set Chassis Intrusion to Reset.
3. Press F10 to save and exit and then press the Enter key to select Yes.

32 Overview of Components
JBAT1: Clear CMOS (Reset BIOS) Jumper
There is CMOS memory onboard that is external powered from a battery located on
the motherboard to save system configuration data. If you want to clear the system
configuration, set the jumper to clear the CMOS memory.

Keep Data Clear CMOS/

(default) Reset BIOS

Resetting BIOS to default values

1. Power off the computer and unplug the power cord
2. Use a jumper cap to short JBAT1 for about 5-10 seconds.
3. Remove the jumper cap from JBAT1.
4. Plug the power cord and power on the computer.

EZ Debug LED
These LEDs indicate the debug status of the motherboard.
CPU - indicates CPU is not detected or fail.
DRAM - indicates DRAM is not detected or fail.
VGA - indicates GPU is not detected or fail.
BOOT - indicates the booting device is not detected
or fail.

Overview of Components 33
 JRGB1: RGB LED connector
The JRGB connector allows you to connect the 5050 RGB LED strips 12V.

1 +12V 2 G

3 R 4 B

RGB LED Strip Connection

1
G R B

RGB extension
JRGB cable (optional) 5050 RGB LED strips 12V
connector

RGB LED Fan Connection

JRGB connector

1
G R B

RGB LED Fan

System Fan connector

Important
y An JRGB connector supports up to 2 meters continuous 5050 RGB LED strips
(12V/G/R/B) with the maximum power rating of 3A (12V).
y Always turn off the power supply and unplug the power cord from the power outlet
before installing or removing the RGB LED strip.
y Please use MSI’s software to control the extended LED strip.

34 Overview of Components
JRAINBOW1: Addressable RGB LED connectors
The JRAINBOW connector allows you to connect the WS2812B Individually Addressable
RGB LED strips 5V.

1 +5V 2 Data

3 No Pin 4 Ground

Addressable RGB LED Strip Connection

1
+5V
D

JRAINBOW Rainbow RGB LED

connector extension cable WS2812B Individually
(optional) Addressable RGB LED strips 5V

Addressable RGB LED Fan Connection

JRAINBOW connector

Addressable RGB LED Fan

System Fan connector

CAUTION
Do not connect the wrong type of LED strips. The JRGB connector and the JRAINBOW
connector provide different voltages, and connecting the 5V LED strip to the JRGB
connector will result in damage to the LED strip.
Important
y The JRAINBOW connector supports up to 75 LEDs WS2812B Individually Addressable
RGB LED strips (5V/Data/Ground) with the maximum power rating of 3A (5V). In the
case of 20% brightness, the connector supports up to 200 LEDs.
y Always turn off the power supply and unplug the power cord from the power outlet
before installing or removing the LED strip.
y Please use MSI’s software to control the extended LED strip.

Overview of Components 35
 Installing OS, Drivers & Utilities
Please download and update the latest utilities and drivers at www.msi.com

Installing Windows® 10
1. Power on the computer.
2. Insert the Windows® 10 installation disc/USB into your computer.
3. Press the Restart button on the computer case.
4. Press F11 key during the computer POST (Power-On Self Test) to get into Boot
Menu.
5. Select the Windows® 10 installation disc/USB from the Boot Menu.
6. Press any key when screen shows Press any key to boot from CD or DVD...
message.
7. Follow the instructions on the screen to install Windows® 10.

Installing Drivers
1. Start up your computer in Windows® 10.
2. Insert MSI® Driver Disc into your optical drive.
3. Click the Select to choose what happens with this disc pop-up notification, then
select Run DVDSetup.exe to open the installer. If you turn off the AutoPlay feature
from the Windows Control Panel, you can still manually execute the DVDSetup.exe
from the root path of the MSI Driver Disc.
4. The installer will find and list all necessary drivers in the Drivers/Software tab.
5. Click the Install button in the lower-right corner of the window.
6. The drivers installation will then be in progress, after it has finished it will prompt
you to restart.
7. Click OK button to finish.
8. Restart your computer.

Installing Utilities
Before you install utilities, you must complete drivers installation.
1. Open the installer as described above.
2. Click the Utilities tab.
3. Select the utilities you want to install.
4. Click the Install button in the lower-right corner of the window.
5. The utilities installation will then be in progress, after it has finished it will prompt
you to restart.
6. Click OK button to finish.
7. Restart your computer.

36 Installing OS, Drivers & Utilities

BIOS Setup
The default settings offer the optimal performance for system stability in normal
conditions. You should always keep the default settings to avoid possible system
damage or failure booting unless you are familiar with BIOS.
Important
y BIOS items are continuously update for better system performance. Therefore, the
description may be slightly different from the latest BIOS and should be for reference
only. You could also refer to the HELP information panel for BIOS item description.
y The pictures in this chapter are for reference only and may vary from the product you
purchased.

Entering BIOS Setup

Press Delete key, when the Press DEL key to enter Setup Menu, F11 to enter Boot
Menu message appears on the screen during the boot process.

Function key
F1: General Help
F2: Add/ Remove a favorite item
F3: Enter Favorites menu
F4: Enter CPU Specifications menu
F5: Enter Memory-Z menu
F6: Load optimized defaults
F7: Switch between Advanced mode and EZ mode
F8: Load Overclocking Profile
F9: Save Overclocking Profile
F10: Save Change and Reset*
F12: Take a screenshot and save it to USB flash drive (FAT/ FAT32 format only).
Ctrl+F: Enter Search page
* When you press F10, a confirmation window appears and it provides the modification
information. Select between Yes or No to confirm your choice.

BIOS Setup 37
 Resetting BIOS
You might need to restore the default BIOS setting to solve certain problems. There are
several ways to reset BIOS:
y Go to BIOS and press F6 to load optimized defaults.
y Short the Clear CMOS jumper on the motherboard.
Important
Be sure the computer is off before clearing CMOS data. Please refer to the Clear
CMOS jumper section for resetting BIOS.

Updating BIOS
Updating BIOS with M-FLASH
Before updating:
Please download the latest BIOS file that matches your motherboard model from MSI
website. And then save the BIOS file into the USB flash drive.
Updating BIOS:
1. Insert the USB flash drive that contains the update file into the USB port.
2. Please refer the following methods to enter flash mode.
ƒ Reboot and press Ctrl + F5 key during POST and click on Yes to reboot the
system.
ƒ Reboot and press Del key during POST to enter BIOS. Click the M-FLASH button
and click on Yes to reboot the system.
3. Select a BIOS file to perform the BIOS update process.
4. When prompted, switch to the target BIOS ROM with Multi-BIOS switch, and click
on Yes to start recovering BIOS.
5. After the flashing process is 100% completed, the system will reboot
automatically.

Updating the BIOS with MSI DRAGON CENTER

Before updating:
Make sure the LAN driver is already installed and the Internet connection is set
properly.
Updating BIOS:
1. Install and launch MSI DRAGON CENTER.
2. Select BIOS Update.
3. Click on Scan button.
4. Click on Download icon to download and install the latest BIOS file.
5. Click Next and choose In Windows mode. And then click Next and Start to start
updating BIOS.
6. After the flashing process is 100% completed, the system will restart
automatically.

38 BIOS Setup
EZ Mode
At EZ mode, it provides the basic system information and allows you to configure the
basic setting. To configure the advanced BIOS settings, please enter the Advanced
Mode by pressing the Setup Mode switch or F7 function key.
XMP switch Setup Mode switch Screenshot Search
Language

System
information

Boot device
priority bar

Information
display

M-Flash

Favorites Function
buttons
Hardware
Monitor

y XMP switch - click on the inner circle to enable/ disable the X.M.P. (Extreme Memory
Profile). Switch the outer circle to select the X.M.P. profile. This switch will only be
available if the X.M.P. supported memory module is installed.
y Setup Mode switch - press this tab or the F7 key to switch between Advanced mode
and EZ mode.
y Screenshot - click on this tab or the F12 key to take a screenshot and save it to USB
flash drive (FAT/ FAT32 format only).
y Search - click on this tab or the Ctrl+F keys and the search page will show. It allows
you to search by BIOS item name, enter the item name to find the item listing. Move
the mouse over a blank space and right click the mouse to exit search page.
Important
In search page, only the F6, F10 and F12 function keys are available.
y Language - allows you to select the language of BIOS setup.
y System information - shows the CPU/ DDR speed, CPU/ MB temperature, MB/ CPU
type, memory size, CPU/ DDR voltage, BIOS version and build date.
y Boot device priority bar - you can move the device icons to change the boot priority.
The boot priority from high to low is left to right.

BIOS Setup 39
 y Information display - click on the CPU, Memory, Storage, Fan Info and Help buttons
on left side to display related information.
y Function buttons - enable or disable the LAN Option ROM, M.2/ Optane Genie, HD
audio controller, AHCI, RAID, CPU Fan Fail Warning Control and BIOS Log Review by
clicking on their respective button.
y M-Flash - click on this button to display the M-Flash menu that provides the way to
update BIOS with a USB flash drive.
y Hardware Monitor - click on this button to display the Hardware Monitor menu that
allows you to manually control the fan speed by percentage.
y Favorites menu - press the F3 key to enter Favorites menu. It allows you to create
personal BIOS menu where you can save and access favorite/ frequently-used BIOS
setting items.
ƒ Default HomePage - allows you to select a BIOS menu (e.g. SETTINGS, OC...,etc)
as the BIOS home page.
ƒ Favorite1~5 - allows you to add the frequently-used/ favorite BIOS setting items
in one page.
ƒ To add a BIOS item to a favorite page (Favorite 1~5)
1. Move the mouse over a BIOS item not only on BIOS menu but also on search
page.
2. Right-click or press F2 key.
3. Choose a favorite page and click on OK.
ƒ To delete a BIOS item from favorite page
1. Move the mouse over a BIOS item on favorite page (Favorite 1~5)
2. Right-click or press F2 key.
3. Choose Delete and click on OK.

40 BIOS Setup
Advanced Mode
Press Setup Mode switch or F7 function key can switch between EZ Mode and
Advanced Mode in BIOS setup.

XMP switch Setup Mode switch Screenshot Search

Language

System
information

Boot device
priority bar

BIOS menu BIOS menu

selection selection

Menu display

y BIOS menu selection - the following options are available:

ƒ SETTINGS - allows you to specify the parameters for chipset and boot devices.
ƒ OC - allows you to adjust the frequency and voltage. Increasing the frequency may
get better performance.
ƒ M-FLASH - provides the way to update BIOS with a USB flash drive.
ƒ OC PROFILE - allows you to manage overclocking profiles.
ƒ HARDWARE MONITOR - allows you to set the speeds of fans and monitor voltages
of system.
ƒ BOARD EXPLORER - provides the information of installed devices on this
motherboard.
y Menu display - provides BIOS setting items and information to be configured.

BIOS Setup 41
 SETTINGS

System Status

f System Date
Sets the system date. Use tab key to switch between date elements.
The format is <day> <month> <date> <year>.
<day> Day of the week, from Sun to Sat, determined by BIOS. Read-only.
<month> The month from Jan. through Dec.
<date> The date from 1 to 31 can be keyed by numeric function keys.
<year> The year can be adjusted by users.

f System Time
Sets the system time. Use tab key to switch between time elements.
The time format is <hour> <minute> <second>.

f SATA PortX/ M2_X

Shows the information of connected SATA/ M.2 devices.
Important
If the connected SATA device is not displayed, turn off computer and re-check SATA
cable and power cable connections of the device and motherboard.

f System Information
Shows detailed system information, including CPU type, BIOS version, and Memory
(read only).

f DMI Information
Shows system information, desktop Board Information and chassis Information. (Read
only).

Advanced
f PCI Subsystem Settings
Sets PCI, PCI express interface protocol and latency timer. Press Enter to enter the
sub-menu.

42 BIOS Setup
 fPEG X - Max Link Speed [Auto]
Sets PCI Express protocol of PCIe x16 slots for matching different installed devices.
[Auto] This item will be configured automatically by BIOS.
[Gen1] Enables PCIe Gen1 support only.
[Gen2] Enables PCIe Gen2 support only.
[Gen3] Enables PCIe Gen3 support only.

fPCI Latency Timer [32]

Sets latency timer of PCI interface device.
[Options: 32, 64, 96, 128, 160, 192, 224, 248 PCI Bus clocks]

fAbove 4G memory/ Crypto Currency mining [Disabled]

Enables or disables 64-bit capable devices to be decoded in above 4G address
space. It is only available if the system supports 64-bit PCI decoding.
[Enabled] Allows you to utilize more than 4x GPUs.
[Disabled] Disables this function.

f ACPI Settings
Sets ACPI parameters of onboard power LED behaviors. Press Enter to enter the sub-
menu.

fPower LED [Blinking]

Sets shining behaviors of the onboard Power LED.
[Dual Color] The power LED turns to another color to indicate the S3 state.
[Blinking] The power LED blinks to indicate the S3 state.

fCPU Over Temperature Alert [Auto]

Enables or disables the CPU overheating alert when CPU temperature is over 80
degrees centigrade.

f Integrated Peripherals
Sets integrated peripherals' parameters, such as LAN, HDD, USB and audio. Press
Enter to enter the sub-menu.

fOnboard LAN Controller [Enabled]

Enables or disables the onboard LAN controller.

fLAN Option ROM [Disabled]

Enables or disables the legacy network Boot Option ROM for detailed settings. This
item will appear when Onboard LAN Controller is enabled.
[Enabled] Enables the onboard LAN Boot ROM.
[Disabled] Disables the onboard LAN Boot ROM.

fNetwork Stack [Disabled]

Sets UEFI network stack for optimizing IPv4 / IPv6 function.
[Enabled] Enables UEFI network stack.
[Disabled] Disables UEFI network stack.

BIOS Setup 43
 fIpv4 PXE Support [Enabled]
When Enabled, the system UEFI network stack will support Ipv4 protocol. This item
will appear when Network Stack is enabled.
[Enabled] Enables the Ipv4 PXE boot support.
[Disabled] Disables the Ipv4 PXE boot support.

fIpv6 PXE Support [Enabled]

When Enabled, the system UEFI network stack will support Ipv6 protocol. This item
will appear when Network Stack is enabled.
[Enabled] Enables the Ipv6 PXE boot support.
[Disabled] Disables the Ipv6 PXE boot support.

fSATA Mode [AHCI Mode]

Sets the operation mode of the onboard SATA controller.
[AHCI Mode] Specify the AHCI mode for SATA storage devices. AHCI
(Advanced Host Controller Interface) offers some
advanced features to enhance the speed and performance
of SATA storage device, such as Native Command Queuing
(NCQ) and hot-plugging.
[RAID/ Optane Mode] Enables RAID/ Optane function for NVMe or PCIe storage
devices.

fM2_X-RST Pcie Storage Remapping [Disabled]

Enables or disables M.2 PCIe storage remapping for Intel Rapid Storage.

fM.2/Optane Genie [Disabled]

Enables or disables M.2 storage/ Optane memory. For M.2 storage, enabling this
allows the M.2 storage devices to build RAID volume.

fSATAx Hot Plug [Disabled]

Allows user to enable or disable the SATA hot plug support.
[Enabled] Enables hot plug support for the SATA ports.
[Disabled] Disables hot plug support for the SATA ports.

fHD Audio Controller [Enabled]

Enables or disables the onboard High Definition Audio controller.

f Integrated Graphics Configuration

Adjusts integrated graphics settings for optimum system. Press Enter to enter the
sub-menu.

fInitiate Graphic Adapter [PEG]

Selects a graphics device as the primary boot device.
[IGD] Integrated Graphics Display.
[PEG] PCI-Express Graphics Device.

fIntegrated Graphics Share Memory [64M]

Selects a fixed amount of system memory allocated to the onboard graphics. This
item will appear when IGD Multi-Monitor is enabled.

44 BIOS Setup
 fIGD Multi-Monitor [Disabled]
Enables or disables the multi-screen output from integrated graphics and external
graphics card. This item appears when Initiate Graphic Adapter set to PEG.
[Enabled] Enables multi-screen function for both integrated and external
graphics cards.
[Disabled] Disables this function.

f USB Configuration
Sets the onboard USB controller and device function. Press Enter to enter the sub-
menu.

fUSB Controller [Enabled]

Enables or disables all USB controller.

fXHCI Hand-off [Diasbled]

Enables or disables XHCI hand-off support for the operating system without XHCI
hand-off feature.

fLegacy USB Support [Enabled]

Sets Legacy USB function support.
[Auto] The system will automatically detect if any USB device is connected
and enable the legacy USB support.
[Enabled] Enable the USB support under legacy mode.
[Disabled] The USB devices will be unavailable under legacy mode.

f Super IO Configuration
Sets system Super I/O chip parameters including LPT and COM ports. Press Enter to
enter the sub-menu.

fSerial (COM) Port 0 Configuration

Sets detailed configuration of serial(COM) port 0. Press Enter to enter the sub-
menu.

fSerial Port [Enabled]

Enables or disables serial port.

fSerial (COM) Port0 Settings [Auto]

Sets serial port 0. If set to Auto, BIOS will optimize the IRQ automatically or you
can set it manually.

f Power Management Setup

Sets system Power Management of ErP and AC Power Loss behaviors. Press Enter to
enter the sub-menu.

fErP Ready [Disabled]

Enables or disables the system power consumption according to ErP regulation.
[Enabled] Optimize the system power consumption according to ErP
regulation. It will not support S4 & S5 wake up by USB, PCI and PCIe
devices.
[Disabled] Disables this function.

BIOS Setup 45
 fRestore after AC Power Loss [Power Off]
Sets the system behaviors while encountering the AC power loss.
[Power Off] Leaves the system in power off state after restoring AC power.
[Power On] Boot up the system after restoring AC power.
[Last State] Restores the system to the previous state (power on/ power off)
before AC power loss.

fSystem Power Fault Protection [Disabled]

Enables or disables the system to boot up when detecting abnormal voltage input.
[Enabled] Protect the system from unexpected power operation and remain
the shut down status.
[Disabled] Disables this function.

f Windows OS Configuration
Sets Windows OS detailed configuration and behaviors. Press Enter to enter the sub-
menu.

fWindows 10 WHQL Support [CSM]

Select CSM or UEFI for running specify operating system support.

fWindows 7 Installation [Disabled]

There is no XHCI driver embeeded in Windows 7. If you want to use USB devices
while installing Windows 7, please enable this item. After Windows 7 is installed,
disable this item for better performance.

fMSI Fast Boot [Disabled]

MSI Fast Boot is the fastest way to boot the system. It will disable more devices to
speed up system boot time which is faster than the boot time of Fast Boot.
[Enabled] Enables the MSI Fast Boot function to speed up booting time. And
the following Fast Boot field will be disabled and fixed.
[Disabled] Disables MSI Fast Boot.
Important
When MSI Fast Boot is enabled, you can use MSI FAST BOOT application to enter BIOS
setup if needed. Please refer Entering BIOS Setup section for details.

fFast Boot [Enabled]

Enables or disables the fast boot feature for Windows 10. This item will only be
available when MSI Fast Boot is disabled.
[Enabled] Enables the Fast Boot configuration to accelerate system boot time.
[Disabled] Disables the Fast Boot configuration.

fInternal GOP Configuration

Manages the onboard Graphics Output Protocol (GOP). Press Enter to enter the
sub-menu. This sub-menu will appear when Windows 10 WHQL Support sets to
UEFI.

fSecure Boot
Sets the Windows secure boot to prevent the unauthorized accessing. Press Enter
to enter the sub-menu.This sub-menu will appear when Windows 10 WHQL
Support sets to UEFI.

46 BIOS Setup
 fSecure Boot Support [Disabled]
Enables or disables secure boot support.
[Enabled] Enables the secure boot function and allow you to set the secure
boot settings.
[Disabled] Disables this function.

fSecure Boot Mode [Standard]

Selects the secure boot mode. This item is to select how the secure boot keys be
loaded. This item appears when Secure Boot Support is enabled.
[Standard] The system will automatically load the secure keys from BIOS.
[Custom] Allows user to configure the secure boot settings and manually load
the secure keys.

fKey Management
Manages the secure boot keys. Press <Enter> to enter the sub-menu. This sub-
menu will appear when Secure Boot Mode sets to Custom.

f Wake Up Event Setup

Sets system wake up behaviors for different sleep modes. Press Enter to enter the
sub-menu.

fWake Up Event By [BIOS]

Selects the wake up event by BIOS or operating system.
[BIOS] Activates the following items, set wake up events of these items.
[OS] The wake up events will be defined by OS.

fResume By RTC Alarm [Disabled]

Disables or enables the system wake up by RTC Alarm.
[Enabled] Enables the system to boot up on a scheduled time/ date.
[Disabled] Disables this function.

fDate (of month) Alarm/ Time (hh:mm:ss) Alarm

Sets RTC alarm date/ Time. If Resume By RTC Alarm is set to [Enabled], the system
will automatically resume (boot up) on a specified date/hour/minute/second in
these fields (using the + and - keys to select the date & time settings).

fResume By PCI-E Device [Disabled]

Enables or disables the wake up function of installed PCI-E expansion cards,
integrated LAN controllers or USB devices which are supported by third party
integrated chips.
[Enabled] Enables the system to be awakened from the power saving modes
when activity or input signal of PCIe device is detected.
[Disabled] Disables this function.

fResume By Onboard Intel LAN [Disabled]

Enables or disables the system wake up by Onboard Intel LAN.
[Enabled] Enables the system to be awakened from the power saving modes
when activity or input signal of Intel LAN device is detected.
[Disabled] Disables this function.

BIOS Setup 47
 fResume by USB Device [Disabled]
Enables or disables the system wake up by USB devices.
[Enabled] Enables the system to be awakened from sleep state when activity of
USB device is detected.
[Disabled] Disables this function.

fResume From S3/S4/S5 by PS/2 Mouse [Disabled]

Enables or disables the system wake up by PS/2 mouse.
[Enabled] Enables the system to be awakened from S3/ S4/ S5 state when
activity of PS/2 mouse is detected.
[Disabled] Disables this function.

fResume From S3/S4/S5 by PS/2 Keyboard [Disabled]

Enables or disables the system wake up by PS/2 keyboard.
[Any Key] Enables the system to be awakened from S3/ S4/ S5 state when
activity of any key on PS/2 keyboard is detected.
[Hot Key] Enables the system to be awakened from S3/ S4/ S5 state when
activity of hot key on PS/2 keyboard is detected.
[Disabled] Disables this function.

fHot Key [Ctrl+Space]

Selects a combination of keys as a hot key to wake the system. This item appears
when you set the Resume From S3/S4/S5 by PS/2 Keyboard to Hot Key.
f Secure Erase+
Enables or disables Secure Erase+ function. Secure Erase+ is the best way to
effectively wipe all data from a SSD. Please note that data of SSD will be erased after
enabling Secure Erase+.

f Intel ( R ) Ethernet Connection I219-V

Shows driver information and configuration of the ethernet controller parameter. This
item will appear when Network Stack is enabled.

Boot
Sets the sequence of system boot devices.

f Full Screen Logo Display [Enabled]

Enables or disables to show the full screen logo while system POST.
[Enabled] Shows the logo in full screen.
[Disabled] Shows the POST messages.
f GO2BIOS [Disabled]
Allows system to enter BIOS setup directly by pressing the Power button for 4 sec pon
bootup.
[Enabled] The system boots straight to the BIOS setup by long pressing the power
button about 4 seconds when the system is off.
[Disabled] Disables this function.

f Bootup NumLock State [On]

Select the keyboard NumLock state upon bootup.

48 BIOS Setup
f Info Block effect [Unlock]
Sets the state of Help information block.
[Unlock] Sliding effect.
[Lock] Fix the Help information block on the screen.

f POST Beep [Disabled]

Enables or disables the beep sound during system POST.

f AUTO CLR_CMOS [Disabled]

Enables or disables to resume the BIOS automatically when the system fail to boot up.

f Boot Mode Select [LEGACY+UEFI]

Sets the system boot mode from legacy or UEFI architecture depending on OS
installation requirement. This item will become un-selectable and will be configured
automatically by BIOS when Windows 10 WHQL Support is enabled.
[UEFI] Enables UEFI BIOS boot mode support only.
[LEGACY+UEFI] Enables both Legacy BIOS boot mode and UEFI BIOS boot
mode.

f FIXED BOOT ORDER Priorities

Sets device priority for system boot.

f Boot Option Priorities

These items are used to prioritize the installed boot devices.

Security
f Administrator Password
Sets administrator password for system security. User has full rights to change the
BIOS items with administrator password. After setting the administrator password, the
state of this item will show“Installed”.

f User Password
Sets User Password for system security. User has limited rights to change the BIOS
items with user password. This item will be available when administrator password is
set. After setting the user password, the state of this item will show“Installed”.

f Password Check [Setup]

Selects a condition that will request the password.
[Setup] A password will be requested for entering the BIOS Setup.
[Boot] A password will be requested for booting the system.

f Password Clear [Enabled]

Enables or disables the clear CMOS behavior to clear a set password.
[Enabled] The password will be erased after clear CMOS.
[Disabled] The password will always be kept.

BIOS Setup 49
 Important
When selecting the Administrator / User Password items, a password box will appear
on the screen. Type the password then press <Enter>. The password typed now will
replace any previous set password from CMOS memory. You will be prompted to
confirm the password. You may also press <Esc> to abort the selection.
To clear a set password, press <Enter> when you are prompted to enter a new
password. A message will confirm the password is being disabled. Once the password
is disabled, you can enter the setup and OS without authorization.

f Trusted Computing
Sets TPM (Trusted Platform Module) function.

fSecurity Device Support [Disabled]

Enables or disables the TPM function to build the endorsement key for accessing
the system.

f Chassis Intrusion Configuration

Press <Enter> to enter the sub-menu.

fChassis Intrusion [Disabled]

Enables or disables recording messages when the chassis is opened. This function
is ready for the chassis equips a chassis intrusion switch.
[Enabled] Once the chassis is opened, the system will record and issue a
warning message.
[Reset] Clear the warning message. After clearing the message, please
return to Enabled or Disabled.
[Disabled] Disables this funcion.

Save & Exit

f Discard Changes and Exit
Exit BIOS setup without saving any change.

f Save Changes and Reboot

Save all changes and reboot the system.

f Save Changes
Save current changes.

f Discard Changes
Discard all changes and restore to the previous values.

f Restore Defaults
Restore or load all default values.

f Boot Override
The installed bootable devices will appear on this menu, you can select one of them to
be the boot device.

50 BIOS Setup
OC

Important
y Overclocking your PC manually is only recommended for advanced users.
y Overclocking is not guaranteed, and if done improperly, it could void your warranty or
severely damage your hardware.

f OC Explore Mode [Normal]

Enables or disables to show the normal or expert version of OC settings.
[Normal] Provides the regular OC settings in BIOS setup.
[Expert] Provides the advanced OC settings for OC expert to configure in BIOS
setup.
Note: We use * as the symbol for the OC settings of Expert mode.

f CPU Ratio Apply Mode [All Core]*

Sets applied mode for CPU ratio. This item only appears when a CPU that supports
Turbo Boost is installed.
[All Core] Enables the CPU Ratio. All CPU cores will run the same CPU ratio that
be set in CPU Ratio.
[Per Core] Enables the Core X X of X xxxx MHz. Sets each CPU core ratio
separately.
[Turbo Ratio] Enables the X-Core Ration Limit. This option only appears when a CPU
that supports this function is installed.
f X-Core Ratio Limit [Auto]*
Allows you to set the CPU ratios for different number of active cores. These items only
appear when CPU Ratio Apply Mode set to Turbo Ratio.

f Adjusted CPU Frequency

Shows the adjusted CPU frequency. Read-only.

f Core X X of X xxxx MHz [Auto]*

Allows you to set the CPU ratios for different number of active cores. These items only
appear when CPU Ratio Apply Mode set to Per Core.

BIOS Setup 51
 f CPU Ratio Offset When Running AVX [Auto]
Sets a offset value to lower the CPU core ratio. It could be helpful for heat dissipation
when running AVX instruction set. If set to Auto, BIOS will configure this setting
automatically. This item appears when the installed CPU supports this function.

f Ring Ratio [Auto]

Sets the ring ratio. The valid value range depends on the installed CPU.

f Adjusted Ring Frequency

Shows the adjusted Ring frequency. Read-only.

f GT Ratio [Auto]
Sets the integrated graphics ratio. The valid value range depends on the installed
CPU.

f Adjusted GT Frequency
Shows the adjusted integrated graphics frequency. Read-only.

f Misc Setting*
Press Enter, + or - key to open or close the following 3 items related to CPU features.

fEIST [Enabled]*
Enables or disables the Enhanced Intel® SpeedStep Technology.
[Enabled] Enables the EIST to adjust CPU voltage and core frequency
dynamically. It can decrease average power consumption and
average heat production.
[Disabled] Disables EIST.

fIntel Turbo Boost [Enabled]*

Enables or disables the Intel® Turbo Boost. This item appears when the installed
CPU supports this function.
[Enabled] Enables this function to boost CPU performance automatically above
rated specifications when system request the highest performance
state.
[Disabled] Disables this function.

f Extreme Memory Profile (X.M.P.) [Disabled]

X.M.P. (Extreme Memory Profile) is the overclocking technology by memory module.
Please enable XMP or select a profile of memory module for overclocking the memory.
This item will be available when the memory modules that support X.M.P. is installed.

f DRAM Reference Clock [Auto]*

Sets the DRAM reference clock. The valid value range depends on the installed CPU.
This item appears when a CPU that supports this adjustment is installed.

f DRAM Frequency [Auto]

Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.

f Adjusted DRAM Frequency

Shows the adjusted DRAM frequency. Read-only.

52 BIOS Setup
f Memory Try It ! [Disabled]
It improve memory compatibility or performance by choosing optimized memory
preset.

f DRAM Timing Mode [Link]

Selects the memory timing mode.
[Link] Allows user to configure the DRAM timing for all memory channel.
[UnLink] Allows user to configure the DRAM timing for respective memory
channel.

f Advanced DRAM Configuration

Press Enter to enter the sub-menu. User can set the memory timing for each/ all
memory channel. The system may become un-stable or un-bootable after changing
memory timing. If it occurs, please clear the CMOS data and restore the default
settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data, and
enter the BIOS to load the default settings.)

f Memory Fast Boot [Auto]*

Enables or disables the initiation and training for memory every booting.
[Auto] The setting will be configured automatically by BIOS.
[Enabled] System will completely keep the archives of first intiation and training
for memory. So the memory will not be initialed and trained when
booting to accelerate the system booting time.
[Disabled] The memory will be initialed and trained every booting.

f CPU Voltages control [Auto]

These options allows you to set the voltages related to CPU. If set to Auto, BIOS will
set these voltages automatically or you can set it manually.

f DRAM Voltages control [Auto]

These options allows you to set the voltages related to memory. If set to Auto, BIOS
will set these voltages automatically or you can set it manually.

f CPU Memory Changed Detect [Enabled]*

Enables or disables the system to issue a warning message during boot when the CPU
or memory has been replaced.
[Enabled] The system will issue a warning message during boot and then you have
to load the default settings for new devices.
[Disabled] Disables this function and keeps the current BIOS settings.

f CPU Specifications
Press Enter to enter the sub-menu. This sub-menu displays the information of
installed CPU. You can also access this information menu at any time by pressing [F4].
Read only.

fCPU Technology Support

Press Enter to enter the sub-menu. The sub-menu shows the key features of
installed CPU. Read only.

BIOS Setup 53
 f MEMORY-Z
Press Enter to enter the sub-menu. This sub-menu displays all the settings and
timings of installed memory. You can also access this information menu at any time by
pressing [F5].

fDIMMA1/A2/B1/B2 Memory SPD

Press Enter to enter the sub-menu. The sub-menu displays the information of
installed memory. Read only.

f CPU Features
Press Enter to enter the sub-menu.

fHyper-Threading [Enabled]
Intel Hyper-Threading technology treats the multi cores inside the processor as
multi logical processors that can execute instructions simultaneously. In this way,
the system performance is highly improved. This item appears when the installed
CPU supports this technology.
[Enable] Enables Intel Hyper-Threading technology.
[Disabled] Disables this item if the system does not support HT function.

fActive Processor Cores Control [All]

Allows you to select the number of active CPU cores.

fLimit CPUID Maximum [Disabled]

Enables or disables the extended CPUID value.
[Enabled] BIOS limits the maximum CPUID input value to circumvent boot
problems with older operating system that do not support the
processor with extended CPUID value.
[Disabled] Use the actual maximum CPUID input value.

fIntel Virtualization Tech [Enabled]

Enables or disables Intel Virtualization technology.
[Enabled] Enables Intel Virtualization technology and allows a platform to run
multiple operating systems in independent partitions. The system
can function as multiple systems virtually.
[Disabled] Disables this function.

fIntel VT-D Tech [Disabled]

Enables or disables Intel VT-D (Intel Virtualization for Directed I/O) technology.

fHardware Prefetcher [Enabled]

Enables or disables the hardware prefetcher (MLC Streamer prefetcher).
[Enabled] Allows the hardware prefetcher to automatically pre-fetch data
and instructions into L2 cache from memory for tuning the CPU
performance.
[Disabled] Disables the hardware prefetcher.

54 BIOS Setup
fAdjacent Cache Line Prefetch [Enabled]
Enables or disables the CPU hardware prefetcher (MLC Spatial prefetcher).
[Enabled] Enables adjacent cache line prefetching for reducing the cache
latency time and tuning the performance to the specific application.
[Disabled] Enables the requested cache line only.

fCPU AES Instructions [Enabled]

Enables or disables the CPU AES (Advanced Encryption Standard-New
Instructions) support. This item appears when a CPU supports this function.

fIntel Adaptive Thermal Monitor [Enabled]

Enables or disables the Intel adaptive thermal monitor function to protect the CPU
from overheating.
[Enabled] Throttles down the CPU core clock speed when the CPU is over the
adaptive temperature.
[Disabled] Disables this function.

fIntel C-State [Auto]

Enables or disables the Intel C-state. C-state is a processor power management
technology defined by ACPI.
[Auto] This setting will be configured automatically by BIOS.
[Enabled] Detects the idle state of system and reduce CPU power consumption
accordingly.
[Disabled] Disable this function.

fC1E Support [Disabled]

Enables or disables the C1E function for power-saving in halt state. This item
appears when Intel C-State is enabled.
[Enabled] Enables C1E function to reduce the CPU frequency and voltage for
power-saving in halt state.
[Disabled] Disables this function.

fPackage C State limit [Auto]

This item allows you to select a CPU C-state level for power-saving when system is
idle. The options of C-state depend on the installed CPU. This item appears when
Intel C-State is enabled.

fCFG Lock [Enabled]

Lock or un-lock the MSR 0xE2[15], CFG lock bit.
[Enabled] Locks the CFG lock bit.
[Disabled] Un-locks the CFG lock bit.

fLong Duration Power Limit (W) [Auto]

Sets the long duration TDP power limit for CPU in Turbo Boost mode.

fLong Duration Maintained (s) [Auto]

Sets the maintaining time for Long duration power Limit(W).

fShort Duration Power Limit (W) [Auto]

Sets the short duration TDP power limit for CPU in Turbo Boost mode.

BIOS Setup 55
 fCPU Current Limit (A) [Auto]
Sets maximum current limit of CPU package in Turbo Boost mode. When the
current is over the specified value, the CPU will automatically reduce the core
frequency for reducing the current.

fFCLK Frequency [Auto]

Sets FCLK frequency. Lower FCLK frequency may help you to set higher base clock
frequency.

fDMI Link Speed [Auto]

Sets DMI speed.

fSW Guard Extensions (SGX) [Software Control]

Enables or disables Intel SGX.

56 BIOS Setup
M-FLASH
M-FLASH provides the way to update BIOS with a USB flash drive. Please down-load
the latest BIOS file that matches your motherboard model from MSI website, save the
BIOS file into your USB flash drive. And then follow the steps below to update BIOS.
1. Insert the USB flash drive that contains the update file into the computer.
2. Click on M-FLASH tab, a demand message will be prompted. Click on Yes to
reboot and enter the flash mode.

3. The system will enter the flash mode and a file selection menu will appear after
rebooting.

4. Select a BIOS file to perform the BIOS update process.

5. After the flashing process is 100% completed, the system will reboot
automatically.

BIOS Setup 57
 OC PROFILE

f Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 management. Press <Enter> to enter the sub-
menu.

fSet Name for Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6

Name the current overclocking profile.

fSave Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6

Save the current overclocking profile.

fLoad Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6

Load the current overclocking profile.

fClear Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6

Clear the current overclocking profile.

f OC Profile Load from ROM

Load OC profile from BIOS ROM.

f OC Profile Save to USB

Save OC profile to the USB flash drive. The USB flash drive should be FAT/ FAT32
format only.

f OC Profile Load from USB

Load OC profile from the USB flash drive. The USB flash drive should be FAT/ FAT32
format only.

58 BIOS Setup
HARDWARE MONITOR

Temperature
& Speed

Fan Manage

Setting
Buttons

Temperature/
Voltage display

f Temperature & Speed

Shows the current CPU temperature, system temperature and fans' speeds.

f Fan Manage
ƒ PWM - allows you to select the PWM mode for fan operation.
ƒ DC - allows you to select the DC mode for fan operation.
ƒ Fan step up/ down time - allows you to set the period of fan step up/ down.
ƒ Smart Fan Mode field - allows you to drag the gradient points to configure
the fan target values for Smart Fan mode. Smart Fan can control the fan speed
automatically depending on the CPU temperature to keep it with in a specific range.
If the current CPU temperature reaches to the target value, the Smart Fan function
will be activated.
Important
y The changing will achieve after you save the changes and reboot the system.
y Make sure fans are working properly after switching the PWM/ DC mode.

f Settings Buttons
ƒ All Full Speed - configures all fans to run at full operating speed.
ƒ All Set Default - configures all fans to run at default operating speed.
ƒ All Set Cancel - discards current changes and restores previous operating fan
speeds .

f Temperature/ Voltage display

Shows CPU/ system temperature and the current voltages of CPU, system and
memory.

BIOS Setup 59
 Intel® Optane™ Memory Configuration
Intel® Optane™ memory can accelerate the Windows 10 64bit operating system. This
section describes how to install and remove the Intel® Optane™ memory.

System Requirements
y Intel® Optane™ memory ready MSI® motherboards
y Supported 8th Gen, or later, Intel® Core™ - i Processor
y System BIOS that supports the Intel® Rapid Storage Technology (Intel® RST) 16 or
later driver
y Operating system: Windows 10 64 bit (UEFI mode).
y Intel® Optane™ Memory Module

Installing the Intel® Optane™ memory

Install the Intel® Rapid Storage Technology 16.
1. Update BIOS (refer to the Updating BIOS section).
2. Install the Intel® Optane™ memory module.
˜ Power off the system.
˜ Refer to the Specifications for location to install your Intel® Optane™ memory
module.
˜ Install the Intel® Optane™ memory module into the M.2 slot.
3. Enable M.2/Optane Genie
˜ Power on and press Delete key to enter BIOS Setup menu.
˜ Enable M.2/Optane Genie by clicking the M.2/Optane Genie item.
˜ Click Ok in the dialog.
˜ Press F10 to save configuration and exit.
4. Install the Intel® Rapid Storage Technology
˜ Reboot to operating system.
˜ Insert the MSI Driver Disc into the optical drive.
˜ Click the Select to choose what happens with this disc pop-up notification,
then select Run DVDSetup.exe to open the installer. If you turn off the AutoPlay
feature from the Windows Control Panel, you can still manually execute the
DVDSetup.exe from the root path of the MSI Driver Disc.
˜ Under the Drivers/Software tab, check the Intel RAID Drivers check-box.
˜ Click the Install button.
˜ When prompt you to restart, click OK button to finish.
˜ Reboot System.

60 Intel® Optane™ Memory Configuration

5. Enable Intel® Optane™ Memory.
˜ Run the Intel® Rapid Storage Technology software.
˜ Click Intel® Optane™ Memory tab and click Enable.
˜ Click Yes in the dialog.

6. Reboot System.

WARNING
Once you enable Intel® Optane™ memory, in order to prevent seriously damage your
operating system, please follow the cautions listed below.
y DO NOT set the SATA mode back to AHCI in BIOS.
y DO NOT revert back to older version of the BIOS.
y DO NOT remove the Intel® Optane™ memory module.
y DO NOT replace the CPU that is not supported by Intel® Optane™ Memory.

Intel® Optane™ Memory Configuration 61

 Removing the Intel® Optane™ memory
If you no longer want to use Intel® Optane™ memory, you have to disable the Intel®
Optane™ memory before removing the Intel® Optane™ memory module to avoid
operating system damage. Please follow the steps below to remove the Intel® Optane™
memory.
1. Disable Intel® Optane™ Memory.
˜ Disable Intel® Optane™ Memory via the Intel® Optane™ memory application
(Intel® Rapid Storage Technology).
˜ Click Yes in the dialog.

˜ Reboot System.
2. Disable M.2/Optane Genie
˜ Press Delete key to enter BIOS Setup menu during POST.
˜ Disable M.2/Optane Genie by clicking M.2/Optane Genie item.
˜ Click Ok in the dialog.
˜ Press F10 to save configuration and exit.
3. Remove the Intel® Optane™ memory module.
˜ Power off the system.
˜ Remove the Intel® Optane™ memory module.

62 Intel® Optane™ Memory Configuration

Troubleshooting
Before sending the motherboard for RMA Lost BIOS password
repair, try to go over troubleshooting
guide first to see if your got similar y Clear the CMOS, but that will cause
symptoms as mentioned below. you to lose all customized settings in the
BIOS.
The power is not on.
There is no audio
y Connect the AC power cord to an
electrical outlet securely. y Adjust the volume.

y Check if all ATX power connectors y Connect the speakers/headphones to

like ATX_PWR1, CPU_PWR1 are audio ports on the motherboard rear IO
connected from the power supply to the panel.
motherboard? y Remove secondary speakers/
y Some power supply units have a power headphones, HDMI cables, USB audio
button on the rear side, make sure the devices.
button is turned on. y Test with another known working
y Check if the power switch cable is speaker or headphone.
connected to JFP1 pin header properly.
There is no network
y Verify the Clear CMOS jumper JBAT1 is
set to Keep DATA. y Make sure the network chipset driver
has been installed.
y Test with another known working power
supply of equal or greater wattage. y Verify if the network cable is properly
connected and make sure the LAN port
The power is on, but no signal to LEDs are properly illuminated.
monitor y Verify your TCP/IP settings.
y Connect the monitor power cord to a y Restart or reset your router.
electrical outlet securely.
y Test with another known working LAN
y Make sure the monitor is turned on. cable.
y Select different inputs on the monitor.
The USB device is not working
y If 3 long beeps are heard, remove all
memory modules and try to install only y Make sure your USB drive driver has
one memory module in the DIMMA2 slot been installed.
first and then restart the computer.
y Verify if USB device is listed in
y If 1 long 2 short beeps are heard, Windows® Device Manager.
remove and reinstall the graphics card
and then restart the computer. y Connect the USB device to other USB
port on the motherboard rear IO panel.
y Test with another known working
graphics card.

The computer does not boot after

updating the BIOS
y Clear the CMOS.
y Use the secondary BIOS to bootup the
system (Only for motherboard with Dual
BIOS)

Troubleshooting 63
 Regulatory Notices
FCC Compliance Statement C-Tick Compliance
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation. This Battery Information
equipment generates, uses and can radiate radio
European Union:
frequency energy and, if not installed and used in
Batteries, battery packs, and
accordance with the instructions, may cause harmful
accumulators should not be disposed of as
interference to radio communications. However, there
unsorted household waste. Please use the
is no guarantee that interference will not occur in a
public collection system to return, recycle,
particular installation. If this equipment does cause
or treat them in compliance with the local
harmful interference to radio or television reception,
regulations.
which can be determined by turning the equipment
Taiwan:
廢電池請回收
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
For better environmental protection, waste
y Reorient or relocate the receiving antenna.
batteries should be collected separately
y Increase the separation between the equipment
for recycling or special disposal.
and receiver.
y Connect the equipment into an outlet on a circuit
California, USA:
different from that to which the receiver is
The button cell battery may contain
connected.
perchlorate material and requires special
y Consult the dealer or an experienced radio/TV
handling when recycled or disposed of in
technician for help.
California.
Caution: Changes or modifications not expressly
For further information please visit:
approved by the party responsible for compliance could
http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
void the user’s authority to operate the equipment.
CAUTION: There is a risk of explosion, if battery is
Tested to comply with FCC standards incorrectly replaced.
FOR HOME OR OFFICE USE Replace only with the same or equivalent type
recommended by the manufacturer.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and Chemical Substances Information
(2) this device must accept any interference received, In compliance with chemical substances regulations,
including interference that may cause undesired such as the EU REACH Regulation (Regulation EC
operation. No. 1907/2006 of the European Parliament and the
Council), MSI provides the information of chemical
CE Conformity substances in products at:
http://www.msi.com/html/popup/csr/evmtprtt_pcm.
Products bearing the CE marking comply html
with one or more of the following EU
Directives as may be applicable:
RED 2014/53/EU; Low Voltage Directive 2014/35/EU; Environmental Policy
EMC Directive 2014/30/EU; RoHS Directive 2011/65/EU. y The product has been designed to
Compliance with these directives is assessed using enable proper reuse of parts and
applicable European Harmonized Standards. recycling and should not be thrown
The point of contact for regulatory matters is MSI, away at its end of life.
MSI-NL Eindhoven 5706 5692 ER Son. y Users should contact the local

B급 기기 (가정용 방송통신기자재)
authorized point of collection for
recycling and disposing of their end-of-life products.
이 기기는 가정용(B급) 전자파적합기기로서 주
y Visit the MSI website and locate a nearby distributor
로 가정에서 사용하는 것을 목적으로 하며, 모
for further recycling information.
든 지역에서 사용할 수 있습니다.
y Users may also reach us at gpcontdev@msi.com for
information regarding proper Disposal, Take-back,

クラスB情報技術装置
Recycling, and Disassembly of MSI products.

この装置は、クラスＢ情報技術装置です。この WEEE (Waste Electrical and

装置は、家庭環境で使用することを目的として
いますが、この装置がラジオやテレビジョン受 Electronic Equipment) Statement
信機に近接して使用されると、受信障害を引き起こすこと ENGLISH
があります。取扱説明書に従って To protect the global environment and as
正しい取り扱いをして下さい an environmentalist, MSI must remind
VCCI-B you that...

64 Regulatory Notices
Under the European Union (“EU”) Directive on Waste equipos electrónicos” no pueden ser depositados
Electrical and Electronic Equipment, Directive 2002/96/ en los contenedores habituales de su municipio, los
EC, which takes effect on August 13, 2005, products fabricantes de equipos electrónicos, están obligados
of “electrical and electronic equipment” cannot a hacerse cargo de dichos productos al termino de
be discarded as municipal wastes anymore, and su período de vida. MSI estará comprometido con los
manufacturers of covered electronic equipment will términos de recogida de sus productos vendidos en
be obligated to take back such products at the end of la Unión Europea al final de su periodo de vida. Usted
their useful life. MSI will comply with the product take debe depositar estos productos en el punto limpio
back requirements at the end of life of MSI-branded establecido por el ayuntamiento de su localidad o
products that are sold into the EU. You can return these entregar a una empresa autorizada para la recogida de
products to local collection points. estos residuos.

DEUTSCH NEDERLANDS
Hinweis von MSI zur Erhaltung und Schutz unserer Om het milieu te beschermen, wil MSI u eraan
Umwelt herinneren dat….
Gemäß der Richtlinie 2002/96/EG über Elektro- und De richtlijn van de Europese Unie (EU) met betrekking
Elektronik-Altgeräte dürfen Elektro- und Elektronik- tot Vervuiling van Electrische en Electronische
Altgeräte nicht mehr als kommunale Abfälle entsorgt producten (2002/96/EC), die op 13 Augustus 2005 in
werden. MSI hat europaweit verschiedene Sammel- zal gaan kunnen niet meer beschouwd worden als
und Recyclingunternehmen beauftragt, die in die vervuiling. Fabrikanten van dit soort producten worden
Europäische Union in Verkehr gebrachten Produkte, verplicht om producten retour te nemen aan het
am Ende seines Lebenszyklus zurückzunehmen. eind van hun levenscyclus. MSI zal overeenkomstig
Bitte entsorgen Sie dieses Produkt zum gegebenen de richtlijn handelen voor de producten die de
Zeitpunkt ausschliesslich an einer lokalen merknaam MSI dragen en verkocht zijn in de EU. Deze
Altgerätesammelstelle in Ihrer Nähe. goederen kunnen geretourneerd worden op lokale
inzamelingspunten.
FRANÇAIS
En tant qu’écologiste et afin de protéger SRPSKI
l’environnement, MSI tient à rappeler ceci... Da bi zaštitili prirodnu sredinu, i kao preduzeće koje
Au sujet de la directive européenne (EU) relative aux vodi računa o okolini i prirodnoj sredini, MSI mora da
déchets des équipement électriques et électroniques, vas podesti da…
directive 2002/96/EC, prenant effet le 13 août 2005, que Po Direktivi Evropske unije (“EU”) o odbačenoj
les produits électriques et électroniques ne peuvent ekektronskoj i električnoj opremi, Direktiva 2002/96/
être déposés dans les décharges ou tout simplement EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi
mis à la poubelle. Les fabricants de ces équipements koji spadaju pod “elektronsku i električnu opremu”
seront obligés de récupérer certains produits en fin ne mogu više biti odbačeni kao običan otpad i
de vie. MSI prendra en compte cette exigence relative proizvođači ove opreme biće prinuđeni da uzmu natrag
au retour des produits en fin de vie au sein de la ove proizvode na kraju njihovog uobičajenog veka
communauté européenne. Par conséquent vous pouvez trajanja. MSI će poštovati zahtev o preuzimanju ovakvih
retourner localement ces matériels dans les points de proizvoda kojima je istekao vek trajanja, koji imaju MSI
collecte. oznaku i koji su prodati u EU. Ove proizvode možete
vratiti na lokalnim mestima za prikupljanje.
РУССКИЙ
Компания MSI предпринимает активные действия POLSKI
по защите окружающей среды, поэтому напоминаем Aby chronić nasze środowisko naturalne oraz jako
вам, что.... firma dbająca o ekologię, MSI przypomina, że...
В соответствии с директивой Европейского Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą
Союза (ЕС) по предотвращению загрязнения odpadów produktów elektrycznych i elektronicznych
окружающей среды использованным электрическим (Dyrektywa 2002/96/EC), która wchodzi w życie 13
и электронным оборудованием (директива sierpnia 2005, tzw. “produkty oraz wyposażenie
WEEE 2002/96/EC), вступающей в силу 13 elektryczne i elektroniczne “ nie mogą być traktowane
августа 2005 года, изделия, относящиеся к jako śmieci komunalne, tak więc producenci tych
электрическому и электронному оборудованию, produktów będą zobowiązani do odbierania ich w
не могут рассматриваться как бытовой мусор, momencie gdy produkt jest wycofywany z użycia.
поэтому производители вышеперечисленного MSI wypełni wymagania UE, przyjmując produkty
электронного оборудования обязаны принимать (sprzedawane na terenie Unii Europejskiej) wycofywane
его для переработки по окончании срока службы. z użycia. Produkty MSI będzie można zwracać w
MSI обязуется соблюдать требования по приему wyznaczonych punktach zbiorczych.
продукции, проданной под маркой MSI на территории
EC, в переработку по окончании срока службы. Вы TÜRKÇE
можете вернуть эти изделия в специализированные Çevreci özelliğiyle bilinen MSI dünyada çevreyi
пункты приема. korumak için hatırlatır:
Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik
ESPAÑOL Malzeme Atığı, 2002/96/EC Kararnamesi altında 13
MSI como empresa comprometida con la protección Ağustos 2005 tarihinden itibaren geçerli olmak üzere,
del medio ambiente, recomienda: elektrikli ve elektronik malzemeler diğer atıklar
Bajo la directiva 2002/96/EC de la Unión Europea gibi çöpe atılamayacak ve bu elektonik cihazların
en materia de desechos y/o equipos electrónicos, üreticileri, cihazların kullanım süreleri bittikten sonra
con fecha de rigor desde el 13 de agosto de 2005, ürünleri geri toplamakla yükümlü olacaktır. Avrupa
los productos clasificados como “eléctricos y Birliği’ne satılan MSI markalı ürünlerin kullanım

Regulatory Notices 65
 süreleri bittiğinde MSI ürünlerin geri alınması isteği ile Türkiye EEE yönetmeliği
işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama
noktalarına bırakabilirsiniz. Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur

ČESKY Україна обмеження на наявність

Záleží nám na ochraně životního prostředí - společnost
MSI upozorňuje...
небезпечних речовин
Podle směrnice Evropské unie (“EU”) o likvidaci Обладнання відповідає вимогам Технічного
elektrických a elektronických výrobků 2002/96/ регламенту щодо обмеження використання
EC platné od 13. srpna 2005 je zakázáno likvidovat деяких небезпечних речовин в електричному та
“elektrické a elektronické výrobky” v běžném електронному обладнані, затвердженого постановою
komunálním odpadu a výrobci elektronických Кабінету Міністрів України від 3 грудня 2008 № 1057.
výrobků, na které se tato směrnice vztahuje, budou
povinni odebírat takové výrobky zpět po skončení Việt Nam RoHS
jejich životnosti. Společnost MSI splní požadavky na
Kể từ ngày 01/12/2012, tất cả các sản phẩm do công
odebírání výrobků značky MSI, prodávaných v zemích
ty MSI sản xuất tuân thủ Thông tư số 30/2011/TT-BCT
EU, po skončení jejich životnosti. Tyto výrobky můžete
quy định tạm thời về giới hạn hàm lượng cho phép của
odevzdat v místních sběrnách.
một số hóa chất độc hại có trong các sản phẩm điện,
điện tử”
MAGYAR
Annak érdekében, hogy környezetünket megvédjük,
illetve környezetvédőként fellépve az MSI emlékezteti
Önt, hogy ...
Az Európai Unió („EU”) 2005. augusztus 13-án hatályba
lépő, az elektromos és elektronikus berendezések
hulladékairól szóló 2002/96/EK irányelve szerint
az elektromos és elektronikus berendezések
többé nem kezelhetőek lakossági hulladékként,
és az ilyen elektronikus berendezések gyártói
kötelessé válnak az ilyen termékek visszavételére
azok hasznos élettartama végén. Az MSI betartja a
termékvisszavétellel kapcsolatos követelményeket
az MSI márkanév alatt az EU-n belül értékesített
termékek esetében, azok élettartamának végén. Az
ilyen termékeket a legközelebbi gyűjtőhelyre viheti.

ITALIANO
Per proteggere l’ambiente, MSI, da sempre amica della
natura, ti ricorda che….
In base alla Direttiva dell’Unione Europea (EU) sullo
Smaltimento dei Materiali Elettrici ed Elettronici,
Direttiva 2002/96/EC in vigore dal 13 Agosto 2005,
prodotti appartenenti alla categoria dei Materiali
Elettrici ed Elettronici non possono più essere eliminati
come rifiuti municipali: i produttori di detti materiali
saranno obbligati a ritirare ogni prodotto alla fine
del suo ciclo di vita. MSI si adeguerà a tale Direttiva
ritirando tutti i prodotti marchiati MSI che sono stati
venduti all’interno dell’Unione Europea alla fine del
loro ciclo di vita. È possibile portare i prodotti nel più
vicino punto di raccolta

日本JIS C 0950材質宣言
日本工業規格JIS C 0950により、2006年7月1日以降に販
売される特定分野の電気および電子機器について、製造
者による含有物質の表示が義務付けられます。
http://www.msi.com/html/popup/csr/cemm_jp.html
http://tw.msi.com/html/popup/csr_tw/cemm_jp.html

India RoHS
This product complies with the “India E-waste
(Management and Handling) Rule 2011” and
prohibits use of lead, mercury, hexavalent chromium,
polybrominated biphenyls or polybrominated diphenyl
ethers in concentrations exceeding 0.1 weight % and
0.01 weight % for cadmium, except for the exemptions
set in Schedule 2 of the Rule.

66 Regulatory Notices
产品中有害物质的名称及含量
有害物质
部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚
(Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE)

印刷电路板组件* ╳ ○ ○ ○ ○ ○

电池** ╳ ○ ○ ○ ○ ○

外部信号连接头 ╳ ○ ○ ○ ○ ○

线材 ╳ ○ ○ ○ ○ ○

本表格依据 SJ/T 11364 的规定编制。

○: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。
╳: 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求，但所有部件都符合
欧盟RoHS要求。
* 印刷电路板组件: 包括印刷电路板及其构成的零部件。
** 电池本体上如有环保使用期限标识，以本体标识为主。
■ 上述有毒有害物质或元素清单会依型号之部件差异而有所增减。
■ 產品部件本体上如有环保使用期限标识，以本体标识为主。

限用物質含有情況標示聲明書
限用物質及其化學符號
單元 鉛 汞 鎘 六價鉻 多溴聯苯 多溴二苯醚
(Pb) (Hg) (Cd) (Cr+6) (PBB) (PBDE)

電路板 ○ ○ ○ ○ ○ ○

電子元件 － ○ ○ ○ ○ ○

金屬機構件 － ○ ○ ○ ○ ○

塑膠機構件 ○ ○ ○ ○ ○ ○

備考1.“超出0.1 wt %”及“超出0.01 wt %”係指限用物質之百分比含量超出百分比含量基準值。

備考2.“○”係指該項限用物質之百分比含量未超出百分比含量基準值。
備考3.“－”係指該項限用物質為排除項目。

Copyright Revision History

Micro-Star Int’l Co.,Ltd. Version 1.0, 2019/06, First release.
Copyright © 2019 All rights reserved. Version 1.1, 2019/07, Updated release.

The MSI logo used is a registered trademark of

Micro-Star Int’l Co., Ltd. All other marks and names
mentioned may be trademarks of their respective
owners. No warranty as to accuracy or completeness
is expressed or implied. MSI reserves the right to make
changes to this document without prior notice.

Technical Support
If a problem arises with your system and no solution
can be obtained from the user guide, please
contact your place of purchase or local distributor.
Alternatively, please try the following help resources
for further guidance.
y Visit the MSI website for technical guide, BIOS
updates, driver updates, and other information:
http://www.msi.com
y Register your product at: http://register.msi.com

Regulatory Notices 67