Hood, Pattern № 393
Sewing description.
Degree of difficulty - “Advanced Beginner”
Description:
Removable hood with the insulation. Fastened on hanging loops and buttons to the downside collar of
down jacket. The hood has a cutting middle and side parts. In the front hood to 1 cm does not reach
down jacket zipper placket - optionally you can change the distance and correct the depth of the hood.
Through an external cut at will provided the marking of casing.
FABRIC SUGGESTIONS: SUPPLIES:
Raincoat, jackets, coat fabrics; 1. Fabric width is 1,4m: the length of the top is 0,6
synthetic insulation of new generation m ; 0,7 m for the insulation. Fabric
with a protective layer on both sides - consumption is given in case of sewing or
for example, "200 Isosoft". cutting mistake. Pattern pieces should be
placed on the fold of a piece of fabric.
Please note: the insulation cut out on the details of
Necessary equipment:
the top by a rough cut, then, after the sewing the
1. Sewing Machine.
2. Tweezer or press to set the top fabrics on the insulation, shaped also on them.
buttons and eyelets. 2. Threads - 4 spools.
3. Buttons for downside collar – 9 pieces.
Note, that there is no pressing in that 4. Elastic tape in the casing and loops for
garment! removable collar – approx. 1,0 - 1,2 m.
5. Tips – 2 pieces.
*If there are no special equipment you 6. Stopper-limiters – 2 pieces.
can make buttonholes at the atelier. 7. Eyelets – 2 pieces.
Seam allowances: All allowances are 10 mm.
All documents, multimedia and texts posted on en-grasser.com are works of authorship and are the property of Grasser
LLC. All the information and products are provided to buyers for personal use. Resale of patterns and master classes is
prohibited and prosecuted by law. Public offering of our products and links to their downloading - on the Internet, social
networks and in the media - is a violation and carries a penalty in accordance to applicable law.
Details:
1. Side part – 4 pieces.
2. Central part – 2 pieces.
3. Cringle amplifier – 2 pieces.
Pattern pieces:
Details for component with insulation:
1. Side part – 1 layer.
2. Central part – 1 layer.
User guide:
1. Print a test square. Grid should measure 10x10 cm.
2. If sides of the square are different, adjust the print scale so that the sides of the square are 10 by
10 cm. It is necessary to follow the correct printing process of patterns. Use the instructions on
our website, "How to print a pattern"- http://en-grasser.com/about/kak-raspechatat-vykroyku/
3. Print the pattern sheets.
4. Tape the pattern sheets together. One more user guide on how to connect patterns given in the
end of the document.
5. Cut out all the individual parts of patterns.
6. Place the details of pattern on the fabric.
7. If you are satisfied with extra length of edges given in the pattern, transfer the details onto fabric
and cut them out.
8. Cut out details of insulation. The insulation cut out by a rough cut.
9. Sew details of top on the insulation by all cuts by the seam width of about 5 mm.
Insulated only the outer layer of the hood in order to avoid large thickness.
10. Cut excesses of syntepon on the details of the top.
11. Stitch middle and side parts of hood (inner and outer layer).
12. Optional – make eyelets for the casing, pre-paving booster compound details.
13. When processing the hood with casing - thread the cord, put stopper-limiters and tips.
All documents, multimedia and texts posted on en-grasser.com are works of authorship and are the property of Grasser
LLC. All the information and products are provided to buyers for personal use. Resale of patterns and master classes is
prohibited and prosecuted by law. Public offering of our products and links to their downloading - on the Internet, social
networks and in the media - is a violation and carries a penalty in accordance to applicable law.
14. Stitch the outer layer of hood by inner layer.
15. Fix the front cut of hood through by decorative line. You can also topstitch the seam allowances of
facing on the inner layer.
16. When processing the hood with casing - scribbling on the line of casing by appropriate mark on
the outline frame.
17. By marking on the cut of the neck of hood, fix the hanging loops for fastening on buttons. Loops
on the cut recommended to fix without fall-over, with little tension to the hood further tightly
fastened to the collar of the garment.
18. Process the cut of neck, Обработать срез горловины, fastening the outer and inner layer of the
hood by decorative line (through).
19. Sew buttons in the area of neck on the downside collar on appropriate parts.
* During the process of tailoring do not be lazy to iron parts of your garment (press seams). The
thing will be sew easier and will be look better.
*How to assembly pattern sheets guide.
Visit our website for detailed instructions with photos on how to assembly pattern sheets - http://en-
grasser.com/about/kak-raspechatat-vykroyku/
We shall indicate briefly how to assemble pattern sheets by GRASSER:
1. For easier connection of all parts, cut the frame at the top and at the bottom of the sheets.
2. All sheets have a combination of letters and digits in the upper left corner. (А1,В1,С1 …)
3. Join the sheets together according to these letter marks. Spread the A’s in a column. The sheets
should lay from A1 to A5 starting at the top. Glue the A-sheets together along the frame line.
4. Similarly connect other letter columns.
5. Glue the columns of letters together side by side.
6. As a result, you should get the canvas as shown in the scheme:
Number of letters and digits can be different (because patterns vary in sizes), but the principle
is the same: letter by letter A,B,C,D,E… placed horizontally; consecutive digits 1, 2, 3, 4, 5,...
placed vertically.
All documents, multimedia and texts posted on en-grasser.com are works of authorship and are the property of Grasser
LLC. All the information and products are provided to buyers for personal use. Resale of patterns and master classes is
prohibited and prosecuted by law. Public offering of our products and links to their downloading - on the Internet, social
networks and in the media - is a violation and carries a penalty in accordance to applicable law.
