RAVENOL MTF-3 SAE 75W
Kategorie: Gear oil for manual transmissions and drive axis
Artikelnummer: 1221104
Viscosity: 75W
Oil type: Full synthetic
Recommendation: AC Delco 10-4037, BMW 23007533818 MTF LT-3,
BMW 83220396706 MTF LT-3, BMW 83227533818 MTF LT-3, BOT 303,
BOT 350 M3, Fiat 9.55550-MZ6, Ford WSS-M2C200-D2, Ford WSS-
M2C200-D3, GM 19259104, GM 1940004, JWS2271, MB 235.10,
Mercedes A 001 989 840 309, Opel B0402167, PSA 9730A8, PSA B71
2310, Suzuki 99000-22B27-036, Toyota 08885-81001, Toyota 08885-
81081, VOLVO 1161838, VOLVO 1161839, VW G 009 317 A2, VW G 052
171 A2, VW G 052 512 A2, VW G 052 527 A2, VW G 055 512 A2, VW G
055 532 A2, VW G 070 726 A2, VW/Audi G 060 726 A2
Application: Passenger car
RAVENOL MTF-3 SAE 75W is a full synthetic low-viscosity transmission oil
for special manual transmissions.
1L | 1221104-001 RAVENOL MTF-3 SAE 75W is designed based on special selected base
4L | 1221104-004 oils and specially coordinated additive treatment. This exceeds the needs
of today's application requirements.
10L | 1221104-010
20L | 1221104-020 RAVENOL MTF-3 SAE 75W is outstanding for use under severe
20L | 1221104-B20 mechanical and thermal stress on transmission oils, even with extended oil
change intervals.
60L | 1221104-060
60L | 1221104-D60
208L | 1221104-208
Application Note
208L | 1221104-D28 RAVENOL MTF-3 SAE 75W is a full synthetic transmission oil for manual
1000L | 1221104-700 transmissions.
Characteristics
A high pressure stable lubricating film even at high oil temperatures and
under high stress.
Outstanding shearing stability and excellent thermal stability.
Excellent viscosity-temperature properties.
High oxidation stability.
Excellent wear protection, outstanding EP properties.
Low foaming properties even at high speeds.
Good shifting behaviour even in low temperatures, extremely low pour
point.
Extended life.
A stable lubricating film even at high oil temperatures and under high
stress.
Technical Product Data
PROPERTY UNIT DATA AUDIT
Density at 20 °C kg/m³ 840,0 EN ISO 12185
Colour gelbbraun VISUELL
Viscosity at 100 °C mm²/s 7,4 DIN 51562-1
Viscosity at 40 °C mm²/s 35,1 DIN 51562-1
Viscosity Index VI 184 DIN ISO 2909
Brookfield Viscosity at -40 °C mPa*s 8.800 ASTM D2983
Pourpoint °C -48 DIN ISO 3016
Flashpoint °C 210 DIN EN ISO 2592
Copper Strip Test at 121 °C 1b ASTM D130
All indicated data are approximate values and are subject to the
commercial fluctuations.
RAVENOL special transmission fluids are special developments for special
gears and cannot be selected on the basis of technical parameters
(viscosity, etc.). Therefore the decision was made not to give technical
data. Please note: RAVENOL special transmission fluid is exclusively to
apply under the original number, as indicated in the product information. If
you are unsure about the right transmission fluid, ask your workshop or
dealership for advice on the transmission type and OEM original number or
ask our experts, making sure to state the VIN code (vehicle identification
number) of your vehicle. Misapplication of RAVENOL special transmission
fluid can lead to malfunction of the transmission shifting problems,
increased fuel consumption, unwanted slip behavior, etc. and cause the
failure of the transmission. Ravensberger Schmierstoffvertrieb GmbH is not
liable for transmission failures in case of wrong selection of RAVENOL
special transmission fluid.
