D & L Thomas Equipment Corp.

For efficient service and expertise in drilling and blasting

equipment we can be reached at the following location:

NEW HAMPSHIRE

P.O. Box 200

1453 Route 9
Spofford, New Hampshire 03462
603-363-4706
U.S. 800-343-0833
Fax: 603-363-4249

Our Email Address:

sales@driller. com

Visit Our Web Sites:

www. driller, com

www. vibration, com

D & L THOMAS EQUIPMENT CORP.

D & L Thomas has it all!
PEOPLE COMMITMENT
D & L Thomas is a company with people who have been D & L Thomas is committed to providing top quality prod-
in the drilling and blasting equipment business for many years. ucts at the most reasonable price possible.
People who have the expertise and many capabilities needed If it doesn't measure up to our tough standards, it does
in the drilling and blasting equipment business as a result of not get into the D & L Thomas product line.
300 years combined experience.
People who maintain our computer ordering, invoicing A FULL LINE
and shipping systems.
People in customer and technical service departments who OF EQUIPMENT
can answer any questions you may have about D & L Thomas D & L Thomas offers a large selection of equipment and
products, warranties or delivery. tools for a wide range of mining and construction.
People in our warehouse and parts department who know Our product line includes all kinds of drilling and blast-
the importance of filling orders accurately and promptly. ing equipment. All kinds of bits and steel including drill rod
strikers and couplings. All kinds of air tools and any type of
accessory you need.
SERVICE Air Tracks, compressors, rock drills, or anything else
D & L Thomas is committed to personal service. We have needed to move rock or concrete, we have it.
a coast-to-coast WATS line; 24 hour world-wide fax service;
full featured website and computerized order processing to
speed shipments to our customers.
WARRANTY
We offer a wide range of product literature to provide A word about warranty. All warranty claims are handled
up-to-date information on all products we carry. promptly. We back every product we sell. Call for details.
We have a staff of expert technicians to assist you with
technical questions or problems you may have.

NOTE: D & L THOMAS EQUIPMENT CORP. has no control over the use of its products, or over
the environment in which they are used. We assume no responsibility for any inconvenience caused
or for any loss, injury, or damage arising from the use or possession of the products.

D & L THOMAS EQUIPMENT CORP.

 D & L Thomas Equipment Corp.

At
D & L THOMAS EQUIPMENT
YOU'RE IMPORTANT TO US!
We are a major distributor of drilling, blasting, air compressor, and
waterwell equipment and supplies in the United States and worldwide.
This means we can give you the best product at the best price with imme-
diate delivery. Our knowledgeable and experienced staff are dedicated to
customer service and quality workmanship.
Our goal is customer satisfaction and the development of lasting re-
lationships with our valued customers. We want to be your first choice for
equipment, rentals, supplies, parts and service and we want to do it right
the first time.
Our large inventory of equipment, parts, and supplies—including hard
to find items—allows us to make same day shipments. We back every
product we sell. Warranty claims are handled promptly.
Your needs are our business, we will assist you any way we can—let
us save you money on the bottom line!

David Thomas
President

D & L THOMAS EQUIPMENT CORP.

 D & L THOMAS EQUIPMENT CORP.
Route 9 • P.O. Box 200 • Spofford, NH 03462
E-mail
sales@driller.com
Website
www.driller.com

(800) 343-0833 • NH 603-363-4706 • FAX (603) 363-4249

SERVING: CONTRACTORS, MUNICIPALITIES & THE DRILLING & BLASTING INDUSTRY
PORTABLE AIR COMPRESSORS MISCELLANEOUS
ACCESSORIES
SULLIVAN PALATEK DUST COLLECTORS
JOY AIR HOSE
SULLAIR LUBRICANTS - OIL, GREASE
GARDNER DENVER/? REBUILT DRIFTERS
ATLAS COPCO SEISMOGRAPHS
BLASTING MATS
VIBRATION MONITORING SYSTEMS
EXPLOSIVE MAGAZINES
AIR BLAST MONITORS DEMOLITION AGENT
BLASTING MACHINES OFFICE TRAILERS
AIR HORNS SAFETY EQUIPMENT
SEQUENTIAL BLASTING CONTROLS WINCHES
GALVANOMETERS
LIGHTNING DETECTORS
RENTALS
MANY OTHER BRANDS 125-1800 CFM AIR
SELF-CONTAINED TRACK DRILLS
COMPRESSORS
• REEDRILL- SCH 5000,400,300,250 AIR & HYDRAULIC TRACK
• SULLIVAN — Scorpion DRILLS
Full Maintinence Facility At Your AIR TOOLS & ACCESSORIES
Service, Instant Access to OEM Parts. BLASTING SUPPLIES
OFFICE/STORAGE TRAILERS

REPAIRS & SERVICE

ROCK DRILLS AIR COMPRESSORS
AIR & HYDRAULIC TRACKS
• CHICAGO PNEUMATIC AIR TOOLS
• GARDNER-DENVER BLASTING DEVICES
• CONTINENTAL
• HARPER AIR NEW & USED PARTS
• ATLAS COPCO
Air Track Drills
FOR ALL MAKES OF
COMPRESSORS, TRACK DRILLS,
AIR COMPRESSORS •Sullair Mark II AIR TOOLS
REBUILT •Gardner-Denver
• Cores taken in trade •Joy/Sullivan MANY HARD TO FIND ITEMS!
One year warranty on parts •Ingersoll-Rand
and labor. USED EQUIPMENT
Air Tools GOOD USED COMPRESSORS
Grinders • Saws • Breakers
CHICAGO PNEUMATIC • DARDA • JET TRACKS DRILLS
& HAND TOOLS
URYU • GARDNER-DENVER • AIR TEC
ATLAS COPCO • MANY OTHERS Boom Mounted
Demolition Tools ALWAYS AVAILABLE

D & L THOMAS EQUIPMENT CORP.

 Product Index

Accessories, Blasting . . . . . . . . . . . . . . . . . . 7-8 Chipping Hammer Tools . . . . . . . . . . . . . 1 5 2 E a r Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3

Loading Pole . . . . . . . . . . . . . . . . . . . . . . 9 - 1 1 Chuck Adapters, Collared . . . . . . . . . . . . . . 115 E a r Protection Muffs . . . . . . . . . . . . . . . . . . .23
Adapter, B i t . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 3 Clamp, Coupling . . . . . . . . . . . . . . . . . . . 29-30 Explosive Magazine . . . . . . . . . . . . . . . 18-19
Adapter Base, Bronze . . . . . . . . . . . . . . . . . . . 9 Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 7 Extinguisher, Fire . . . . . . . . . . . . . . . . . . . . . .24
Adapter Couplings . . . . . . . . . . . . . . . . . . 1 2 3 Clay Digger Tools . . . . . . . . . . . . . . . . . . . 1 5 0 Eye Bolts, Fire . . . . . . . . . . . . . . . . . . . . . . . . .65
Air Compressor, Portable . . . . . . . . . 163-164 Clip, Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 6 E y e Protector . . . . . . . . . . . . . . . . . . . . . . 22-23
Air Dryers . . . . . . . . . . . . . . . . . . . . . . . . . 73-75 Cobra Combi . . . . . . . . . . . . . . . . . . . . . . . . . . 5 9
Air Grinder . . . . . . . . . . . . . . . . . . . . . 3 5 - 3 6 , 5 1 Collared Chuck Adapters . . . . . . . . . . . . . 1 1 5
Air Horn, Safety . . . . . . . . . . . . . . . . . . . . . . .21 Compactor . . . . . . . . . . . . . . . . . . . 52,101-102 Fire Extinguisher . . . . . . . . . . . . . . . . . . . . . . 2 4
A i r Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 7 Compressor, Portable Air . . . . . . . . . 163-165 First A i d K i t . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3
A i r Line Lubricator . . . . . . . . . . . . . . . . . . . 2 7 Concrete Breaker, Air . . . . . . . . . . . . . 43-57 Fishing Tools . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 4
A i r Saws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 6 Concrete Saws . . . . . . . . . . . . . . . . . .52,96-99 Fittings, Boss . . . . . . . . . . . . . . . . . . . . . . 28-29
A i r Tool O i l . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3 Cone, Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 4 Flag, Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 4
A i r Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 0 Connector, Three Way . . . . . . . . . . . . . . . . . .28 Flowmeters . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1
A i r Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 8 Continental Tools . . . . . . . . . . . . . . . . . 53-54
A i r Winch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 6 Control, Basting . . . . . . . . . . . . . . . . . . . . . 12,15
Asphalt Cutter, Backhoe Mnt . . . . . . . . . . .93 Core Drill, Hyd. . . . . . . . . . . . . . . . . . . . . . . . 9 9 Galvanometer, Digital . . . . . . . . . . . . . . . . . . 12
Atlas Copco Tools . . . . . . . . . . . . . . . . . . 55-58 Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 3 Gas, Breaker . . . . . . . . . . . . . . . . . . . . . . . 58-60
Couplings, Adapter . . . . . . . . . . . . . . . . . . . 123 Gas, Drill/Breaker . . . . . . . . . . . . . . . . . . 58-60
B Dead End . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 8 Gauge, Depth . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Backfill Tamper . . . . . . . . . . . . . . . . . . . . . . . 5 3 Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 8 Gauge, Needle . . . . . . . . . . . . . . . . . . . . . . . . . 2 6
Backhoe Attachments . . . . . . . . . . . . . . . . . 9 3 Malleable Iron . . . . . . . . . . . . . . . . . . . 28-30 Gloves, Work . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2
Ball Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 6 Plated Steel . . . . . . . . . . . . . . . . . . . . . . 28-30 Goggles, Protective . . . . . . . . . . . . . . . . 22-23
Banding Tool, Strap . . . . . . . . . . . . . . . . . . . .27 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 8 Grinder, A i r . . . . . . . . . . . . . . . . . . . . .35-36,51
Bar, Striking . . . . . . . . . . . . . . . . . . . . . . 126-146 Universal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 8 Grinding System, B i t . . . . . . . . . . . . . . . . . . 3 6
Barricades . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 5 Coupling Clamp . . . . . . . . . . . . . . . . . . 29-30 Grinding Wheel . . . . . . . . . . . . . . . . . . . . . . 3 5
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Coupling Information . . . . . . . . . . . . . . . 1 2 2 Grinding Wheel, D i e . . . . . . . . . . . . . . . . . . 3 5
Bitty Breaker . . . . . . . . . . . . . . . . . . . . . . . . . 4 1 Crawler Mounted Drill . . . . . . . . . . . . 77-89 Grout Equipment . . . . . . . . . . . . . . . . . . . . . . 6 7
Bits, Button . . . . . . . . . . . . . . . . . . . . . . 107-108 Crimper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 0 Guest Equipment . . . . . . . . . . . . . . . . . . . . . . 9 3
Cross Style . . . . . . . . . . . . . . . . . . . . 109-110 Cross Style Bits . . . . . . . . . . . . . . . . . 109-110 Guide Bits . . . . . . . . . . . . . . . . . . . . . . . . . . 1 0 7
Diamond, Core . . . . . . . . . . . . . . . . . . . . . 100
Retrac . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 0 7 D H
Taper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 0 Dead E n d Coupling . . . . . . . . . . . . . . . . . . . . 2 8 Hammer, Breaker, G a s . . . . . . . . . . . . . 59-60
Whirlibits . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 1 De-icers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Chipping . . . . . . . . . . . . . . . 47-48,53,56-57
X-Style . . . . . . . . . . . . . . . . . . . . . . . . 109-110 Demolition Agent, Non-Explosive . . . 65-66 Drill, Hyd . . . . . . . . . . . . . . . . . . . . . . . .62,89
B i t Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 3 Demolition Tools, Boom Mounted . . 156-158 Jack, Air . . . . . . . . . . . . . . . . . . . 43-44,54-55
Bit Grinder, Button . . . . . . . . . . . . . . . . . . . .36 Depth Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 Hammer Drill, G a s . . . . . . . . . . . . . . . . 59-60
B i t Lube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 4 Detector, Lightning . . . . . . . . . . . . . . . . . . . . . 12 Hammer Tools, Demo . . . . . . . . . . . . 154-158
Bit Resharpening Information . . . . . . 104-106 Dewatering, Pump . . . . . . . . . . . . . . . . . . . . . 11 Handbook, Blasters . . . . . . . . . . . . . . . . . . . . . . 7
Blades, Concrete . . . . . . . . . . . . . . . . . . . 96-97 D i e Grinder Wheel . . . . . . . . . . . . . . . . . . . . 3 5 Hand Tools . . . . . . . . . . . . . . . . . . . . . . . . 43-64
Blasthole Drills . . . . . . . . . . . . . . . . . . . . . . . 9 1 Dispenser Reel, Wire . . . . . . . . . . . . . . . . . . . 8 Handy Ram, A i r . . . . . . . . . . . . . . . . . . . . . . . 9 3
Blasting Accessories . . . . . . . . . . . . . . . . . . 7 - 8 Dowel Drill . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2 Hard H a t . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3
Blasting Initiators . . . . . . . . . . . . . . . . . . 16,20 Drill, Crawler Mounted . . . . . . . . . . . . . . 77-89 Hearing Protectors . . . . . . . . . . . . . . . . . . . . 2 3
Blasting Devices . . . . . . . . . . . . . . . 7,8,16,20 Hammer, Gas . . . . . . . . . . . . . . . . . . . . . . . . 6 0 Hole Plugs, A i r . . . . . . . . . . . . . . . . . . . . . . . . 4 0
Blaster's Handbook . . . . . . . . . . . . . . . . . . . . 7 Hydraulic Drifter . . . . . . . . . . . . . . . . . 80-89 Hole Savers, Air . . . . . . . . . . . . . . . . . . . . . . . 4 0
Blasting M a t . . . . . . . . . . . . . . . . . . . . . . 37-39 Hydraulic Track . . . . . . . . . . . . . . . . . . 80-89 Spear Type, Bell Type . . . . . . . . . . . . . . . 114
Blasting Seismograph . . . . . . . . . . . . . . . . . 13 Pneumatic . . . . . . . . . . . . . . . . . . . . . . . 77-88 Horn, Safety Air . . . . . . . . . . . . . . . . . . . . . . . . 2 1
Boom Mounted Demolition Tools . . . . . 156-158 Ram Track . . . . . . . . . . . . . . . . . . . . . . 77-88 Hose, A i r . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 7
Boots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 R o c k . . . . . . . . . . . . . . . . . . . . . . 43-44,54-55 Hose Clamp . . . . . . . . . . . . . . . . . . . . .27,29-30
Boss Fittings . . . . . . . . . . . . . . . . . . . . . . 28-30 Track . . . . . . . . . . . . . . . . . . . . . . . . . . . 77-80 Hose Coupling . . . . . . . . . . . . . . . . . . . . . . . . 2 9
Breaker, Concrete, Air . . . . . . . . . . . . . . 43-57 Water Well and Rotary . . . . . . . . . . . . . . . .91 Hose Mender . . . . . . . . . . . . . . . . . . . . . . . . . . 2 9
Hydraulic . . . . . . . . . . . . . . . . . . . . . . . . 61-63 Drill B i t Coupling Lubricant . . . . . . . . . . 3 4 Hose Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . 2 9
Impact, Bitty Breaker . . . . . . . . . . . . . . . . . 41 Drill Hole Plug . . . . . . . . . . . . . . . . . . . . . . . . 1 0 Hydraulic Drifter Drill . . . . . . . . . . . . 83-89
Paving . . . . . . . . . . . . . . . . . . . . . . . .43-46,54 Drill Monitor . . . . . . . . . . . . . . . . . . . . . . 14-15 Hydraulic Drill, Rock . . . . . . . . . . . . . . 83-89
Breaker Hammer, G a s . . . . . . . . . . . . . 62-64 Drill Steel . . . . . . . . . . . . . . . . . . . . . . . . 112-114 Hydraulic O i l . . . . . . . . . . . . . . . . . . . . . . . . . 3 3
Betonamit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 6 Drill Steel, Carbon Hollow . . . . . . . . . . . . . 115 Hydraulic Rock Splitter . . . . . . . . . . . 63-64
Button Bits . . . . . . . . . . . . . . . . . . . . . . 107-108 Tapered . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 6 Hydraulic Saws . . . . . . . . . . . . . . . . . . . 98-99
Button B i t Grinder . . . . . . . . . . . . . . . . . . . . 3 6 Drill Steel Information . . . . . . . . . . . . . . . Ill Hydraulic Track Drill . . . . . . . . . . . . . . 79-89
Dryers, Air . . . . . . . . . . . . . . . . . . . . . . . . . 73-75
Dust Collecting System . . . . . . . . . . . 68-72
Carbon Hollow Drill Steel . . . . . . . . . . . . 1 1 5 Dust Collector . . . . . . . . . . . . . . . . . . . . 68-72 Information, B i t Resharpening . . . . 104-106
Check Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 6 Dust Mask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 3
Chemgrout............................67 Drill Steel . . . . . . . . . . . . . . . . . . . . . . . . . . Ill
Chicago Pneumatic . . . . . . . . . . . . . . . 44-52 Paving Breaker Acces. . . . . . . . . . . . . . . 148
Chipping Hammer . . . . . . . 47-48,53,56-57 E a r Muff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3 Striking Bars . . . . . . . . . . . . . . . . . . . . . . . 125

D & L THOMAS EQUIPMENT CORP.

Intraset 117,121 Rain Suit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 Track Drill, Hydraulic . . . . . . . . . . . . . . . 80-89
Ram Track Drill . . . . . . . . . . . . . . . . . . . 77-78 R a m . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77-79
R a m m e r s . . . . . . . . . . . . . . . . . . . . . . . . 101-102 Track Mounted Drill . . . . . . . . . . . . . . . 77-91
Jack Hammer . . . . . . . . . . . . . . . 43-44,54-55 Reducer Couplings . . . . . . . . . . . . . . . . . . 1 2 3 Trowel, Concrete . . . . . . . . . . . . . . . . . . . . . 103
J o y Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5 Redro Bitty Breaker . . . . . . . . . . . . . . . . . . . 4 1
Reel, Blasting Wire . . . . . . . . . . . . . . . . . . . . . . 7 U
Reel, Depth Gauge . . . . . . . . . . . . . . . . . . . . . . 11 Universal Coupling . . . . . . . . . . . . . . . . . . . 2 8
Knife, Powder . . . . ..............8 REO, Blasting Eq. . . . . . . . . . . . . . . . . . . . . . . . 15 Universal Coupling Clamp . . . . . . . . . . . . 2 9
Knock-off Blocks 110 Respirator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 Used Equipment . . . . . . . . . . . . . . . . . . . . . . . 9 2
Retrieving Devices . . . . . . . . . . . . . . . . . . . . . 9
R G C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98-99 V
Level, Sight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 0 Rivet Buster . . . . . . . . . . . . . . . . . . . . . . . .46,53 Valve, A i r . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 8
Lightning Detector . . . . . . . . . . . . . . . . . . . . 12 Rock Drill . . . . . . . . . . . . . . . . . . . 43-44,55-56 Ball . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 8
Liner, Hard Hat . . . . . . . . . . . . . . . . . . . . . . . . .23 Rock Drill, Hydraulic . . . . . . . . . . . . . . . 80-89 Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 6
Loader Attachments . . . . . . . . . . . . . . . . . . . 9 3 Rock Drill O i l . . . . . . . . . . . . . . . . . . . . . . . . . 3 4 Vest, Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 5
Loader Forks . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3 Rock Splitter, Hydraulic . . . . . . . . . . . . 62-64 Vibrator, Concrete . . . . . . . . . . . . . . . . . . . . . . 5 2
Loading Pole . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Rotary Handrills . . . . . . . . . . . . . . . . . . . . . . 4 7
Loading Pole Accessories . . . . . . . . . . . . 9-11 W
Locks, Padlock . . . . . . . . . . . . . . . . . . . . . . . . . 1 8 Warning Lights . . . . . . . . . . . . . . . . . . . . . . . 2 5
Lubricant, Drill Bit Coupling . . . . . . . . . . . .34 Safety Cable . . . . . . . . . . . . . . . . . . . . . . . . . . 2 7 Washers, Rubber . . . . . . . . . . . . . . . . . . . . . . . 2 8
Rock Drill Oil . . . . . . . . . . . . . . . . . . . . . . . .34 Safety Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 8 Weights, Depth Gauge . . . . . . . . . . . . . . . . . . 11
Lubricator, Air Line . . . . . . . . . . . . . . . . .27,33 Safety Cone . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 4 Wheel, Grinding . . . . . . . . . . . . . . . . . . . . . . . . 3 5
Lubricants, Misc. . . . . . . . . . . . . . . . . . . 33-34 Safety Equipment . . . . . . . . . . . . . . . . . 24-25 Whip Checks . . . . . . . . . . . . . . . . . . . . . . . . . 2 7
Safety Flag . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 4 Whirlibits . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 1
M Safety Glasses . . . . . . . . . . . . . . . . . . . . . . . . 2 2 Winch, A i r . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 6
Magazine, Explosive . . . . . . . . . . . 18-19 Safety Signs . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 4 Wire, Blasting . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Mat, Blasting . . . . . . . . . . . . . . . . . . . 37-39 Safety Siren . . . . . . . . . . . . . . . . . . . . . . . . 1 3 , 2 1 Wire Dispenser Reel . . . . . . . . . . . . . . . . . . . 8
Mender, Hose . . . . . . . . . .............29 Safety Supplies . . . . . . . . . . . . . . . . . . . 22-26 Wire Stripper . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Meters, Flow . . . . . . . . . . .............31 Saw, Concrete . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2 Woodings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2
Mirror . . . . . . . . . . . . . . . .............10 Scorpion, Self Contained ............78 Work, Glove . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2
Multimeter . . . . . . . . . . . .............12 Sequencial Blasting ............17
Seismograph, Blasting . . . . . . . . . . . . . . . . . . 13 X
N Shank Rods 115 X-Style Bits . . . . . . . . . . . . . . . . . . . . . 109-110
Needle Gauge . . . . . . . . . . . . . . . . . . . . . . . . . 2 6 Sight Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 0
Nipples, Hose . . . . . . . . . . . . . . . . . . . . . . . . . . 2 9 Signs, Safety 24
Non-Explosive Demolition Agent . . . . . . . 6 6 Sign Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 4
Siren, Safety . . . . . . . . . . . . . . . . . . . . . . . . 1 3 , 2 1
O Snow Plow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 9
Oilers, Line . . . . . . . . . . . . . . . . . . . . . . . . 2 7 , 3 1 Spader . . . . . . . . . . . . . . . . . . . . . . . . . .43-44,53
Oil, Rock Drill . . . . . . . . . . . . . . . . . . . . . . . . .34 Splitter, H y d . . . . . . . . . . . . . . . . . . . . . . . 63-64
ODEX 159-161 Stand, Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 4
Oil, Hydraulic . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3 Steel, Drill . . . . . . . . . . . . . . . . . . . . . . . . 112-114
Overburden Drilling Information . . . . . . . 1 5 8 Stingers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Equipment . . . . . . . . . . . . . . . . . . . . . 159-161 Stompers . . . . . . . . . . . . . . . . . . . . . . . . 101-102
OSHA Valves 26 Stone, Shim & Wedges . . . . . . . . . . . . . . . . . 120
Stoper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2
P Storm Warning Device . . . . . . . . . . . . . . . . . 12
Padlocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 8 Strap Banding Tool . . . . . . . . . . . . . . . . . . . . 2 7
Paving Breaker . . . . . . . . . . . . . . . . . 44-46,54 Striking B a r . . . . . . . . . . . . . . . . . . . . . 126-146
Paving Breaker Tools . . . . . . . . . . . . 149-151
Plug, Drill Hole . . . . . . . . . . . . . . . . . . . . . . . . .10
Plug Drills . . . . . . . . . . . . . . . . . . . . . . 118-122 Tamper, Backfill . . . . . . . . . . . . . . . . . . . . . . . .53
Plug, Tamping . . . . . . . . . . . . . . . . . . . . . . . . . . 1 0 Tamper, Compactor . . . . . . . . . . . . . . . 101-102
Pneumatic Drifter Drill . . . . . . . . . . . . . . . 9 0 Tamping Plug . . . . . . . . . . . . . . . . . . . . . . . . . 1 0
Pneumatic Drills, Track . . . . . . . . . . . 77-80 Tanner G a s . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2
Pole, Loading . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Taper Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 0
Portable A i r Compressor . . . . . . . . 163-164 Tapered Drill Steel . . . . . . . . . . . . . . . . . . . 1 1 6
Powder Knife . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 TEI Drills . . . . . . . . . . . . . . . . . . . . . . . . . . 94-95
Powder Punch . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Three W a y Connector . . . . . . . . . . . . . . . . . 2 8
Protective C a p . . . . . . . . . . . . . . . . . . . . . . . . 2 3 Tools, Chipping Hammer . . . . . . . . . . . . . . . 151
Pumps, Water . . . . . . . . . . . . . . . . . . . . . . . . . . 4 9 Clay Digger . . . . . . . . . . . . . . . . . . . . . . . . 150
Dewatering . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Demolition, Boom . . . . . . . . . . . . . . . . 155
Hammer . . . . . . . . . . . . . . . . . . . . . . . . . 1 5 2
R Paving Breaker . . . . . . . . . . . . . . . . . . 1 4 9
Rain Pants . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 Track Drill . . . . . . . . . . . . . . . . . . . . . . . . 77-80

D & L THOMAS EQUIPMENT CORP.

Blasting Devices
and Accessories
Part
Description Size Number
"Nylon armored" con- 11b. spool 7W20GS
necting/lead wire. 20G.
single strand copper. (225'/lb.)
Flame resistant flexible
PVC plastic insulation
provides superior resis-
tance to tough environ-
ments.

20G. duplex wire. All Ib. spool TW20GD

the qualities as the single
gauge. (115'/lb.)

14 gauge single wire, 250'/spool TW14GS

rugged and lasting.
Same "nylon armor" for
longevity.

14 gauge duplex lead 250'/spool TW14GD

wire. As above.

Wire stripper and cutters. 5" 7WS101S-1

Suitable for use on all
commonly used insu-
lated wire. Cutting sur-
faces ground for smooth
shearing. Adjusting
stop. Soft plastic grips.

Silver chloride battery TSCB-1

| used with the galvanom-
jeters. Dependability.

"ISEE" blaster's hand- TBHB

book. This is the 17th
edition. It represents
more than 185 years of
DuPontand ETI blasting
expertise combined with
years of experience of
top explosives engineers.
prices of other sizes upon request
D & L THOMAS EQUIPMENT CORP.
 Blasting Devices

Part
Description Size Number
Leadwire reel. Light- 13" X 18" X 10" ILWR
weight and strong—will
hold up to 500'of 14-2
wire. Wire not included.
Metal reel on stand.

"Sidewinder I" dispenser 14-1/2" X 17-1/2" X 6" TSWD

reel. Rugged yellow
plastic, formed handle.
Capacity: 380'of 14G.
single wire. Talk about
handy, this is it.

This lightweight hand RH

reel made of high impact
plastic allows you to ei-
ther reel while walking
or simply reel wire to
you. It will accommo-
date 500' of 14-2 ga.
wire.

Solid brass powder 4-1/2" LX 5/16"D TPP-1

punch with tough plastic 6"LX5/16"D TPP-2
handle.Three sizes. 8"LX5/16"D TPP-3

This cord cutter/punch is CCP

made of hard durable
plastic. It has a replace-
able stainless steel razor
blade with a holder for
extra blades on the
handle.

This powder knife has 4" (closed) TPK

extra-large curved
sheepfoot cutting blade, Knife/ Punch T34391
4" long. Blade locks Combo.
open. Made of enduring
carbon steel.

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP.
Loading Poles
and Accessories
Part
Description Number
Loading poles are fabri- TLP16W
cated from straight,
grained fir. 1-5/16" X16'.

Hook-type connectors THTC1

are constructed of man-
ganese bronze for
strength and are non-
sparking.
Ball and socket type PHLPC
connectors.

Bronze adapter base for TBAB

use on wooden or plas-
tic poles. Can be firmly
secured.
Stingers for lead pole. 1ST
Mounts on adapter base
#TBAB. 5/8" threaded
stud.
Retrieving device, brass, TRDSB
with 5/8" threaded stud.
Increases your options.
This retriever is used RC
with the connector type
sectional pole or simply
put a rope through the
eye to remove or dis-
lodge explosives in the
blast hole.
This retriever is mainly RB
used with the ball and
socket sectional pole for
removing or dislodging
explosives in the blast
hole.
These couplers are made PC
of plastic with a male
and female thread and
are to be glued into a 1-
1/4" plastic pipe to form
your tamping pole.

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP.
 Loading Poles
and Accessories
Part
Description Size Number

Tamping plugs with 5/8" 2" TTP2RS

threaded stud. For use with 3" TTP3RS
adapter base. Tough rubber
for long life.

Tamping plugs of solid rub- 2" x 1 1/4" TTP225R

ber. Goes directly onto plas- 2" x 1 1/2" TTP250R
tic or wooden poles. Two di- 3" x 1 1/4" TTP325R
ameters available. 3" x 1 1/2" TTP350R

HOLE SIZE
Drill hole plugs. Light, du- 3/4" - 1-3/4" TDHP1
rable and will never freeze up. 2" - 2-1/4" TDHP1A
Lugs hold plug in place, inden- 3-4"" . 3" TDHP2A
tation for blasting cord. Fol- 4" -5-1/2" TDHP6
lowing sizes cover all holes of 6" - 8-1/2" TDHP9
1/2" to 13" circumference 9". 10" TDHP10
withstands extreme abuse. 10 1/2" - 12-1/2" TDHP13

Site level. Rugged all-steel TSL

construction with a nylon case
and belt loop.

This tool is equipped with an

auto stop for crimping caps, Aluminum Plated TCC
complete with a fuse cutter
and a powder punch on the Brass Plated TCCB
handle. The crimping and cut-
ting edges are heat-treated for
added durability.

Plex-l-Mirrors for observing

in d r i l l hole. Rugged TPM
plexiglass with hard mirrored
finish. 4"x4".

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 10
Loading Poles
and Accessories
Part
Description Size Number
Depth gauge. Printed surface TDG100
measures inches and feet.
Handle at one end with clip to
hold 16 oz. lead weight. 100' 08 oz. TDGW08
long. (Weight not included.) 12oz. TDGW12
16oz. TDGW16

This lightweight hand reel made RDG

of high-impact plastic will accom-
modate any length depth gauge
or tape refill.

Blasters Open-Reel TDGOR

Fiberglass Depth Gauge
with Coated Weight
You can count on this depth
gauge for the strength, depend-
ability, and accuracy you demand
in the field. 1/2" wide polyvinyl-
coated fiberglass tape is printed
on two sides in easy-to-read
graduations of inches and feet.
The high impact, cycolac, cross-
arm open reel provides easy re-
winding with a heavy-duty steel
reinforced crank handle. 16oz.
epoxy coated lead weight is at-
tached to the tape with a non-
sparkling connector.

PMP075
PMP100
PMP125
Dewatering Pump
The BDS Pump is a simple dewatering device, designed for
one man operation.
It requires low pressure, low volume, compressed air for op-
eration. The assembly consists of a stainless steel pump body,
expandable (and replaceable) rubber sleeves, upper and lower
discharge hoses, air supply hose, pressure regulator assem-
bly, operating valve, and fittings.
The lightweight tube and sleeve assembly is lowered into the
blasthole to be dewatered, the air valve opened, inflating and
consequently expanding the sleeve. Once the sleeve seals
against the wall of the hole, air pressure is automatically di-
verted through the lower end of the sleeve. This pressurizes
the hole below the sleeve, forcing water up the discharge tube
to the surface.

prices of other sizes upon request

11 D & L THOMAS EQUIPMENT CORP.
 MODEL STORM WARNING
LIGHTNING DETECTOR

35O
MODEL 350 LIGHTNING DETECTOR
The Model 350 is a low cost Atmospheric RF sensing instrument
that detects electrical storm discharge and indicates the
storm's proximity in approximate distance in miles.
This unit allows the operator to preset an alarm distance,
and the Model 350 will then constantly monitor an approach-
ing storm cell and when the threshold has been exceeded,
the red warning lights will flash and a pulse tone will be emit-
ted from the Model 350. The flashing lights and the pulsed tone
will continue until the "reset" button has been pressed which
returns the 350 to the monitoring mode.
The external warning, strobe light and siren unit may be re-
moved from the 350 and mounted externally to allow person-
nel to observe the 350 from a greater distance or in a noisy
setting and respond to approaching danger.

Water Resistant Case____________________

Sound: 108 db at 3 feet
Size: 14 x 10.6x6.5
Weight: 13lbs.
Accessories Included:
Test Signal Generator
120V AC Battery Charger
Telescoping Antenna
External Warning Strobe Light & Siren Unit______
Options:
External Antenna & Cable for Remote Mounting

Galvanometers
WARRANTY
Thomas Instruments is committed to providing the
best and most reliable equipment available. As
such, all Thomas Instruments products are
backed by a 1-year warranty. Please contact
Thomas Instruments, or your nearest distributor for
full details.

••I

MODEL 104 .
The rugged waterproof Model 104 is the perfect
replacement for your old analog meter. The digi-
tal display allows accuracy far beyond these old Meters MSHA Battery Current
meters in a similar size, while MSHA approved and Model Weight Size Seal Approved Ranges Type Options Output
absolutely safe in blasting circuit measurements,
MODEL 105 1 (1-2KQ) 9V NEDA Leather
The lightweight 105 is the perfect galvanometer 104 12 oz 3x3x15 Waterproof Yes Galvanometer 1604/1604A Case <2mA
for today's explosive experts. The bright yellow
105 is MSHA approved and is small enough to fit
in a shirt pocket while remaining rugged enough
for demanding usage everyday. 105 5oz 4.6x2,4x1.1 Dust & Damp Yes HlQ-2Kfl) 9V NEDA Leather <2mA
MODEL 109SC Proof Galvanometer 1604 / 1604A Case
The 109SC allows checking for stray current with-
out the fumbling with leads. The 109SC is a safety 8 Range
MUST while using electric blasting caps. Remem- 109SC 20 oz 3.9x7.2x2 Waterproof No Multimeter/ 9V NEDA Vinyl
ber, stray current must be tested for prior to any Stray Current 1604 / 1604A Case <4mA
electric blasting operation, OSHA 29CFR 1926
906B and MSHA 30CFR 77.1304.TT.

D & L THOMAS EQUIPMENT CORP. 12

 I N S T R U M E N T S INC.

VIBRATION MONITORING SYSTEMS

SEISMORAPHS
VMS-200S COMPACT EASE-OF-OPERATION
• Computer Analysis Software for
Detailed Reports (WIN200S Software
w/Windows)
• 100 Event Full Waveform Memory
• 100 Event Peak Measurement Memory
• Log Keeping
• Automatic or Manual Trigger
• Operational Parameters "FIELD"
Changeable without a PC
• Record Time 1 to 10 seconds
• External Geophone (Optional Internal Geophones)

THOMAS 260 SIREN

260 SIREN
The 260 Siren meets your needs for a portable warning
device for signaling in the Blasting and Mining Industry.
The 260 is designed for rough outdoor use in all types
of weather and is extremely loud, rated at 110 DB at 10
feet. The 260 features a rechargeable 12V battery
mounted in a nearly indestructible case with a metal
carrying handle. The 260 is the ideal warning device
that needs no external power source and is always
ready for use.

Size: 9x7x7.5_______________________
Weight: 9 Ibs.________________________
Battery: 12V Rechargeable_______________
Sound Level: 110 db at 10 feet
Charger: DC Vehicle; Optional: 120V AC________

Conceived, Designed, and Manufactured in the United States

13 D & L THOMAS EQUIPMENT CORP.

 I N S T R U M E N T S INC

DRILL MONITOR
DM-100 INCREASE YOUR PRODUCTIVITY BY
REDUCING SETUP TIME
ALSO USEFUL FOR EVALUATING SYSTEM'S PERFORMANCE
Displays Information such as
^ Angle of Boom, Front to Back
and Side to Side IN DEGREES OR SLOPE!!
- Hole Depth and Bit Depth
are displayed at the same time
>* Total Footage Drilled viewable at
any time, even while drilling.
^ Drill Rate indication programmable for
Feet/Min or Feet/Hour Drill Rate,
Screen updating is also programmable
in one second intervals,
Highlights

>- Buttons are Oil Tight

^ Buttons are Large and easy to press,
even with gloves on!
^ LARGE easy to read LCD Back lit
for reading in dark conditions,
>* Memory is retained even when power is
shut off.
^ Convenient mounting bracket, allowing user to adjust viewing angle,
>- Easy to setup, use and understand

SEE OUR WEB SITE www.vibration.com.

SYSTEM
DRILL MONITOR displays important intormation such as HOLE DEPTH, BIT DEPTH, and DRILLING RATE on a LARGE and
easy to read LCD display. Also displayed is the BOOM ANGLE, front to back and side to side. Make setup a breeze
when drilling pre-split holes or whenever the angle really counts. No more guessing! Simply read the LCD screen to
determine your boom angle when setting up each hole.
Displayed on the LCD are the angle of the boom shown in one of two selectable methods.

1. Angle shown in degrees. 0 - 60 degrees

2. Slope of boom referenced to 1 foot,

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 14
 DRILL MONITOR
DM-100
Depth Indicator
The HOLE Depth readout displays the exact depth of the hole to the nearest tenth of an inch. Know
exactly how deep your hole is, NO more over or under drilling holes. Bit Depth readout lets you know
exactly where your bit is in reference to the bottom of the hole, Also know exactly where a seam is to
aid in loading holes.

Three Models Available

DM 100: Drill Monitor complete with Drilling Rate, Hole & Bit Depth, Drill Footage, and Mast Angle
feature.
DM1 DOE: Drill Monitor without Mast Angle feature,
DM100A: Drill Monitor with Mast Angle feature only,

LCD
Large easy to read LCD is also Backlit making it easy to read even in the worst of conditions,

Power
Power is drawn from the rig's battery, The Drill Monitor draws no power when it's power switch is turned
off, eliminating any chance of draining the batter/, Yet even with no power supplied, the Drill Monitor
retains all pertinent information such as total hole footage drilled,

Drilling Rate
Also included on the same screen is the drill rate. Know how many feet/minute or feet/hour you are
drilling. Knowing your drill rate can immediately show a loss of production due to a dull bit or other
causes. Use the Drill Monitor to optimize your drill rate by adjusting feed pressure or rotation speeds and
see the results immediately,

TECHNICAL SPECIFICATIONS
Power supply: 12 Volts DC To 30 Volts DC Clinometer Specifications
LCD: 4 line x 20 character Large
8 mm high lettering Total Angle Range + / - 60 deg
Backlit: Linear Range + / - 45 deg
Temperature: -20 C to +70 C
-4 F to +158 F Threshold and resolution .001 deg
Power Linearity + / - .25 deg
Consumption: ON: 1.0 Amp Null to 10 deg + / - . 1 deg
OFF: 0.0 Amp 10 deg to 45 deg + / - 1 % angle
Box
Dimensions: Length 8,5 in (21,6cm)
Width 6.0 in (15.2 cm)
Depth 3.0 in ( 7.6 cm)

prices of other sizes upon request

15 D & L THOMAS EQUIPMENT CORP.
 SINGLE CIRCUIT
BLASTING MACHINES

"""'"'""'"'""

GENERAL INFORMATION
The REO Single Circuit Blasting Machines are of solid-state capacitor discharge design.
They offer a wide variety of energy and voltage choices in a series of compact, lightweight,
portable, water and corrosion resistant enclosures, and are designed to provide extended
service under a variety of operating conditions.

CHARACTERISTICS
Capacity1 Weight
Model Volts Energy Power Source
Single Size
Parallel Series0 [Shipping Weight] (ALKALINE Batteries)
Series'2
0.8 IDS. (0.3 kg.) 4.1 x 2.2 x 3.6 in.
CD225-2J 225 2 Joules 35 Not recommended [2 Ibs. (1 kg.)] (10.5 x 5.6 x 9.0 cm.)
One 9 volt
0.6 Ibs. (0.3 kg.) Eveready 522 or equal
CD450-4J 4 Joules 65
[2 Ibs. (1 kg.)]
450
3.7 Ibs. (1.7 kg.) 9.0 x 8.0 x 3.4 in. Eight 1.5 volt "A A" Cells
CD450A-22J 22 Joules 100 200'4
{5 Ibs. (3 kg.)] (22.9 x 20.3 x 8.6 cm.) Eveready E91 or equal
5.2 Ibs. (2.4 kg.) 10.3 x 7.3 x 4.1 in. Eight 1.5 volt "C" Cells
CD450B-50J 50 Joules 105 500*5
[7 Ibs. (3 kg.)] (26.2 x 18.5 x 10.2 cm.) Eveready E93 or equal

10.6 Ibs. (4.8 kg.) 9.5 x 8.1 x 6.2 Twelve 1.5 volt "D" Cells
CD600B-100J 600 100 Joules 140 1000'6
(14 Ibs. (7 kg.)] (24.1 x 20.6 x 15.7 cm.) Eveready E95 or equal

CD1000-9J 1000 9 Joules . 145

Not recommended 3.7 Ibs. (1.7 kg.) 9.0 x 8.0 x 3.4 in. Eight 1.5 volt "AA" Cells
[5 Ibs. (3 kg.)] (22.9 x 20.3 x 8.6 cm.) Eveready E91 or equal
CD1500-10J 1500 10 Joules 185

#1 2 ohm EB detonators based on US standard detonator rating of 20 millijoules/ohm delvered in 5 milliseconds. Contact your powder company for recommendations.
#2 12 ohm maximum lead line.
#3 3 ohm maximum lead line.
#4 4 series of 50 2 ohm EB detonators.
#5 8 series of 63 2 ohm EB detonators.
#6 1 1 series of 91 2 ohm EB detonators.

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 16
 ET175-10
ET225-10
ET500-10

ADS and AD6 Load

Plugs are used to test The REO ET175-10, ET225-10 and ET500-10 Energy Testers provide nominal test values of
blasting machines. The energy output (measured in percentage of rated energy) for each of the 10 circuits of REO
load plug contains 10 re- Sequential Blasting Machines listed in the table below. A Light Emitting Diode (LED) bar
graph display allows the user to view the energy output of the REO Blasting Machine under
sistors, each equal to the test.
maximum load resistanc All REO Energy Testers have self test features and contain internal load resistance. Each
of the blasting machine. tester is supplied with a cable to connect the tester to the blasting machine.
Shipping Weight: 1 Ib. (0.5 kg.)

GENERAL INFORMATION
The REO BM175-1 OPT Sequential Blasting Machine is a mod-
ern easy-to-use programmable timing machine meeting the spe-
cial requirements of bench blasting operations where precise mil-
lisecond/microsecond accuracy is critical.
Programmable timing permits the blaster to take full advan-
tage of greater accuracies offered by the new electric detonators
toward desired safety, fragmentation, and seismic frequency of a
blast.
The BM175-1 OPT is available in master and slave models. In
applications where more than 10 circuits are required, multiple
10-circuit slave units can be added as necessary. Each is pro-
BM175-1 OPT
grammable from 1 to 999 milliseconds, and on special require-
ments, selections of microsecond increments are offered
The BM175-1 OPT is also available in two remote models.

EC15-2, EC15-10, EC15-250, EC15-300, and

EC15-500 Extension Cables are available in 2
ft. (0.6m), 10 ft. (3.0m), 250 ft. (76.2m), 300 ft.
(91.4m) and 500 ft. (152.4m) lengths. The EC15-
10, EC15-250, EC15-300 and EC15-500 cables
are used to connect the power distribution switch
to the TB15 terminal board. Cables of other
lengths are available upon request.
Shipping Weight:

EC15-2 1 Ib. (0.5kg.)

EC15-10 1 Ib. (0.5kg.) EC15-300 21 Ibs. (9.5 kg.)
EC15-250 17 Ibs. (7.7 kg.) EC15-500 32 Ibs. (14.5 kg.)

CR50 Cable Reel is made of corro-

sion-resistant lightweight aluminum
and is used to carry and transport
extension cables up to 500 ft. A
shorting socket keeps all circuits
shunted until the plug is removed
for connection to the blasting ma-
TB15 Terminal Board is a compact, durable,
chine.
rugged, lightweight printed circuit design with
10 pairs of hookup terminals for up to 10 cir-
cuits. A socket is provided for connecting ex-
Shipping Weight: 13 Ibs. (6.4 kg.) tension cables.
Crank handle swings and
locks in two positions,
Shipping Weight: 5 Ibs. (2.3 kg.)
for storage and operation.

prices of other sizes upon request

17 D & L THOMAS EQUIPMENT CORP.
 Magazines

Outside
Dimensions Lining Approximate Part
Description L x Wx H___Thickness Case Capacity Number
"D & L Thomas" truck magazine. 60" x 30" x 24" 2" 11 TM112
Separate compartments for
blasting caps and dynamite.
Meets 1MB specifications 22. 42" x 24" x 24" 2" TM42
Integral locking mechanism.
Lined with 2" wood. Brackets for
bolting down to truck bed. Fits
into standard size truck body in
front of wheel wells.

Part
Description Number
"Master" Lock, Size 15. TM15
Meets ATF specifica-
tions. 7/16" hardened
shackle. Available
keyed alike. Protect
your investment.

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 18
 Magazines

Outside
Dimensions Lining Approximate Part
Description LxWxH Thickness Case Capacity Number
"Tread" magazines are built to 42" x 42" x 33" 3" 12 TM123
meet rigid government specifica- 4" 12 TM124
tions as set forth in the IME rules 42" x 42" x 42" 3" 24 TM243
and regulations. Constructed of 4" 24 TM244
1/4" hot rolled steel plate and full 72" x 48" x 48" 3" 40 TM403
thickness hardwood. Hinge pins 4" TM404
40
are hardened and hinge barrels
and lock staples are made from 66" x 60" x 60" 3" 90 TM903
alloy steel for extra protecion. 4" 90 TM904
Available as permanent or por- 66" x 66" x 84" 3" 108 TM1083
table. Doors are sheared from 4" 108 TM1084
the side to provide a close fit and 66" x 84" x 84" 3" 144 TM1443
have drip protection from the 4" 144 TM1444
weather. The first inner layer of 96" x 84" x 84" 3" 200 TM2003
hardwood is bolted in place with 4" 200 TM2004
successive layers attached by air
132"x84"x84" 3" 320 TM3203
staples. Screened ventilators
4" 320 TM3204
prevent the packing of explosives
from hindering ventilation.

prices of other sizes upon request

19 D & L THOMAS EQUIPMENT CORP.
Blasting
Devices

10-Cap

Features
DEPENDABILITY — always ready-to-fire,
anytime, anywhere, and under varied climatic
conditions.
REPEATABILITY — consistent results, blast
after blast after blast.
CAPACITORS — no capacitors to replace.
BATTERIES — no batteries to replace.
LONG OPERATING LIFE — built stronger
to last longer.
MAXIMUM EFFICIENCY — conversion of
manual energy to electrical output achieved
through minimum number of wearing parts.
SAFETY FEATURE — current does not flow
until maximum capacity is achieved at end of
the stroke.
PROVEN PERFORMANCE — on-the-job
performance by satisfied users since 1918.
MINIMUM MAINTENANCE — only occa-
sional lubrication to assure smooth operation.
Unaffected by long storage or hard service.

Basic Specifications
MODEL
RATED PEAK OUTPUT APPROX. CASE DIMEN. HEIGHTS SHIPPING
CAPACITY* OHMS AMPS. VOLTS OPERATION CONSTR. OF CASE INC. HDL. WEIGHT
10-Cap 50 2 100 Twist-Handle Brass 31/2x4x51/2 8 In. 51/4Lbs.

*Based on Regular Blasting Caps with 30 foot copper leg wires connected in straight series. Output data for reference only —
subject to revision according to firing conditions.

Warranty: Each unit is warranted to be free from defects in material and workmanship if properly operated, maintained and
stored for a period of one year from date of shipment. Our obligation under this warranty is limited to correcting or replacing
without charge at our Factory, transportation charges prepaid, any part or parts which shall disclose to our satisfaction to have
been originally defective. We shall not be liable for loss, damage or expense resulting from the use of this product nor any
repairs made outside of our Factory.
Service: Manufacturer provides a complete repair service and spare parts are readily available for all models.

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 20
 Safety Air Horns
Part
Description Number

Air Horn warning device. TSAH

Low cost, effective - comes
as you see it with hose
whip.

TKAH-1

THOMAS AIR WHISTLE

WITH MANUAL HAND VALVE
#TKAH-1

OVERALL LENGTH 11-1/4"

BELL LENGTH 5-7/8"
BELL DIA. 2"
AIR CONSUMPTION
@ 100 P.S.I. 4.18CFS
NET WEIGHT 3-1/2 Ibs.
DECIBEL RATING 122DBCAT
1 METER AT
100P.S.I
MFG. - U.S.A
SOLID BRASS

1/2" N.P.T. Size

This lightweight push-button horn TWHORN

meets D.O.T. specs, and is made
of durable plastic. It has up to 100
blasts to each replaceable con-
tainer. Comes with ERA ap-
proved gas.

prices of other sizes upon request

21 D & L THOMAS EQUIPMENT CORP.
 Safety Supplies
Part
Description Number

General-purpose, economical TWG-2

work gloves, full cut, cowhide
palms and fingers.

Dust and Mist Respirator. Light- T2200-1

weight, low-cost and popular. T2200-20
The first maintenance-free respi-
rator to be approved for lung-
damaging dust. NIOSH/MSHA
approved for toxic dusts and
mists with a PEL not less than
0.05mg/m3. Protects against
coal, cadmium, chormium, lead,
manganese, cotton dust, dilica
and more.
99% efficient. Sold 20 per box.

100% clear polycarbonate. Pro- Clear TSG5030

vides precise optical quality and Grey TSG11130032
no distortion in the lens. Vented Green TSG11130034
temples provide for comfortable Green TSG5022
air- flow while offering side pro- Amber TSG5042
tection against impact. Meets
ANSI Z87.1-1989

Soft polyester inner fabric with Med. TGRSM

gang stitching to keep the fabric Large TGRSL
from pulling free or pilling. A du- X-Large TGRSXL
rable, comfortable garment with XX-Large TGRSXXL
that "corduroy" look. Outside- XXX-Large TGRSXXXL
coated with a flexible PVC, and
completely waterproof, this spe-
cial fabric construction keeps its
flexibility even in the coldest
weather. Resistant to oils, rough
wear, and all seams heat-sealed.

This safety yellow boot is full and Size 10 2400-9085-10

extra wide, designed to be worn Size 11 2400-9085-11
with shoes. Features include lin- Size 13 2400-9085-13
ing, adjustable strap buckle on Size 14 2400-9085-14
top and safe grip cleated sole.
100% waterproof.

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 22
Safety Supplies
Part
Description Number

"White Cross" industrial first TFAK25

aid kit. Serves up to 25 people.
Assorted supplies for you
needs. All-steel case can be
wall mounted. Be prepared

High density polyethylene Red THHR

caps with rain trough. Easily Green THHG
replaceable 4-point nylon sus- White THHW
pension, adjusts to sizes
6-1/2 to 8. Slip-lok™ attach-
ment accepts face shields and
welding helmets quickly and
easily. Can be front or side
embossed. Meets or exceeds
ANSI Z89.1-1986 Class B.

Assorted quilted hard-hat THHL

liner. Outer shell flame
retardant. Liner a soft flannel.
Adjustable chin strap. Color:
blue/gray. One size fits all.

Goggles. Flexible frame with TPGVG10

perforated sides for comfort.
Protects from flying particles
and dust. Fits over personal
glasses. Clear only. Complies
with OSHA requirements.

Safety hearing protectors. THB-45

Noise reduction rating: 23
decibels. Lightweight and ad-
justable. Hear the difference.

"Ear" plugs for convenient TEHP

hearing protection. A must.
Noise reduction rating at TEHP-200
29dB. Soft foam-type plugs
expand to comfortably seal off
unnecessary noise.

Corded 100 pr./box MAXCORD

Uncorded 200 pr./box

prices of other sizes upon request

23 D & L THOMAS EQUIPMENT CORP.
 Safety Signs
and Accessories
Part
Description Size Number

"Blasting Zone" sign. Rugged 36"x36"

and highly visible. Available on Diagonal TBZ36DA
aluminum or plastic, diagonal
or horizontal. Horizontal TBZ36HA
End Blast Zone 1000' Horizontal TBZE36HA
End Blasting Horizontal TEZ36HA
Blasting Zone 1000' Diagonal TZ036DA
Men Working (Symbol) Horizontal TMW36HA
Warning Signal/ Horizontal TWS36HA
Blast Signal/All Clear

Safety sign stand. Holds 36" x TSS36A

36" signs horizontally or diago-
nally. Full height: 66". Can hold
3 flags. Folds compactly.
Also, Roll-up sign stands. X880
Safety flag, heavy vinyl, bright 17"SQ. TSF17
orang. 3' wooden pole. Have
the added safety margin. Fits
in stand #TSS36A.

Safety cones. Tough vinyl, bril- 12"H TSC18

liant safety orange. High vis- 18"H TSC12
ibility. 28"H TSC28

"Explosives" Class A signs. 10 1/2" x 10 1/2"

Tough vinyl sign on magnetic magnetic T522SM
or wooden backing. wooden T522SW
Pressure sensitive T522SPS

Available with flipholder. Six Flip Holder TQSH

signs: Exp. A,B; drive safely,
dangerous, flammable, radio- Quickway TSP
active, and oxidizer. Flip Sign

"TRIPLEX" Tri-class 2 Ibs. 8 oz. TFE

rechargable fire extinguisher.
Pressure gauges indicates
time to recharge. Be prepared.
All rated 1-A; 10-B;C

IME sign - This approved sign, 15"x36" IME

for all explosive manufacturers aluminum
and storage facilities, white re-
flective background w/2" red
letters.
prices of other sizes upon request
D & L THOMAS EQUIPMENT CORP. 24
 THE ONE SOURCE FOR
SIGNS AND SAFETY EQUIPMENT
Warning Lights
Wide Variety
7-Volt Barricade
Lights to
Hi-Intensity
Pole Transporter
"B" Lights
Flag and Light
Clamps
X-880
Proper wind
deflection for
30", 36" or 48"
Aluminum or
Flexible Roll-up
signs
Traffic Cones
6", 12", 18",
28" or 36"—
also offer
Reflexite
Cone
Collars

Safety Warning
Vests Flags
3 Styles 13", 18"
Series 800 available or 24"
Barricades
Lengths: 3', T-Stands
4', 6' or 8' Accommodate
30", 36" or
48" Signs

H-300
Stand
with 30"
Sign

ROAD
CLOSED

Flagman
Helpers

Type II
Barricade

E-Stand
Economical
and versatile

prices of other sizes upon request

25 D & L THOMAS EQUIPMENT CORP.
 Air Hoses and Accessories
Part
Description Size Number

AIR HOSE TEST GAUGE Scale from 0-160 PSI. TNG-1

Includes case.
The SYRACUSE AIR HOSE TEST GAUGE
is a rugged pressure gauge with a hypoder-
mic needle assembled to the socket. When
the needle is inserted through a rubber air-
line, such as used on pneumatically-oper-
ated tools, the air pressure can be measured
at any point between the compressor and
the tool. It is a test instrument, to determine
whether the size of a given hose is sufficient
for its length, to deliver adequate pressure
for operation or to determine if a stoppage
exists in the line.
The gauge is furnished complete with
needle, removable protective sleeve with
guard and leatherette carrying case.

Needles - replacement for gauge. TNGN

SAFETY CHECK VALVE

For Rotary Screw & Rotary Vane and Reciprocating Piston Compressors
NOT TO BE USED IN SAND BLASTING APPLICATIONS

NPT & Hose Cut-off Flow Rate

FLOW DIRECTION I.D. Size Parf# (CFM at 90 PSI)
1/4" SCVL2 23-29
Automatically senses change in air flow and shuts off the
3/8" SCVM3 39-47
flow in the event of a surge in excess of valve rating. Fully
SCVS3 52-65
conforms to OSHA regulation 1926.302 requiring safety 1/2" SCVM4 70-78
device at source of air supply and at branch air lines. SCVS4 80-96
Controls air flow in only one direction, however, permits 3/4" SCVL6 72-88
flow in either direction. The cut off flow of the selected SCVM6 92-108
valve must be less than the actual flow that would occur SCVR6 112-128
should a hose or coupling fail. The valve selection must be SCVJ6 132-148
based on additional guidelines other than compressor SCVS6 160-180
SCVH6 180-200
rating or hose size. Air flow (scfm) varies with distance of
1" SCVL8 165-195
flow and restrictions within each system. Select the pipe
SCVM8 220-260
size which is the same as the hose with which it will be SCVS8 280-320
used. To avoid nuisance cutoffs, the valve should have a SCVH8 310-340
nominal cut off rating of 110% of the maximum consump- 1 1/4" SCVL10 260-290
tion of the air tool to be used. Install a cut off valve in each SCVM10 300-340
line and branch line subject to rupturing or accidental SCVS10 440-500
disconnection. Test each valve for proper function at SCVH10 570-630
installation and periodically thereafter. The only time one of 1 1/2" SCVL12 300-360
SCVM12 470-530
these valves will not perform properly is when the tool
SCVS12 640-720
usage and maximum line flow are close to equal. When
SCVH12 750-830
start-up is underway, open the Air Control Valve at the 2" SCVL16 510-590
Compressor or Manifold VERY SLOWLY to allow air to SCVM16 725-825
bleed through the Check Valve so that pressure is equal- SCVS16 900-1050
ized on each side of the valve. If the valve fails to operate SCVH16 1100-1200
despite meeting all conditions, check the hose line for 3" SCVL24 1200-1400
obstructions or a Hose Mender restricting normal air flow. SCVS24 2400-2700
Maximum Working Pressure: 250 PSI. Brass construction. SCVH24 2850-3050

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 26
Air Hose and Accessories
Part
Description Size Number

Jack hammer hose. Heavy 3/4" X 50' 07550CR

duty, smooth red jacket,
American made. 300 PSI,
1200 Ib. burst, coupled.

Yellow jacketed wire 3/4" X 50' 07550UY

braided hose. Offered in all 1"X50' 10050UY
the popular sizes, un- 1-1/4"X50' 12550UY
coupled unless noted. 1-1/2"X50' 15050UY
2" X 50' 20050UY
2-1/2"X50' 25050UY
3" X 50' 30050UY

Coupled hose. Same qual- 3/4" X 50' 07550CY

ity as above. 1"X50' 10050CY
Best Quality. 1-1/4"X50' 12550CY
1-1/2"X50' 15050CY
2" X 50' 20050CY
2-1/2"X50' 25050CY
3" X 50' 30050CY

Super-strap banding tool. T51900

Heavy duty, heat treated,
cadmium plated. Center
punch method. Handles
3/8" and 5/8" bands.

Galvanized steel pre- 3/4" GSC75

formed clamps. Used with 1" GSC100
T51900 master tool. 1 1/4" GSC125
1 1/2" GSC150
2" GSC200
2 1/2" GSC250
2 3/4" GSC275
Larger Sizes Available. 3" GSC300

Steel safety cable prevents 1/4" cable

hose whip in case of sepa- 1 " X 1 Ft. TWB-1
ration of couplings. Spring- 2" X 2 Ft. TWA-2
loaded loops. Easily
opened.

In-Line lubricator. Pressure 1/3" pint T2086

backs through into reservoir 1/2" pint T2087 PL400L
and is equalized. Upon 1 pint T2088 PL500
operation, back pressure 3 gal. oilers (GD)
forces fog of oil into line and See Pg. 31
provides perfect lubrication.
Oil level sight glass, adjust-
ing screw.

prices of other sizes upon request

27 D & L THOMAS EQUIPMENT CORP.
 Self-Honing Air Valves Size 1/2 3/4 1
double male type, handle stop, Thomas-Part No. ADA 12 ADA 34 ADA 10
malleable iron/plated DIXON-Part No. V22 V44 V66
designed for compressed air Le-Hi-Part No. VM50 VM75 VM100
210 psi max. pressure Port Diameter .562 .719 .938
also available with ..Downstream Venting" SCFM-Flow 200 225 325
Price $

Self-Honing Air Valves Size 1/2 3/4 1 2

double female type Thomas-Part No. ADI12 ADI34 ADI10 ADI20
malleable iron/plated DIXON-Part No. V33 V55 V77 V139
designed for compressed air Le-Hi-Part No. VF50 VF75 VF100 VF200
210 psi max. pressure Port Diameter .562 .719 .938 1.938
also available with ..Downstream Venting" SCFM-Flow 200 225 325 1000
Price $

Air Compressor • Double Valve- Size 3/4 1

..Downstream Venting", handle stops, Thomas-Part No. DMA 34 DMA 10
with two outlets 3/4 N.P.T. male Port Diameter .719 .719
malleable iron/plated SCFM-Flow 225 225
210 psi max. pressure Price $

Full-Port Ball Valves Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2
double female type, handle stop, Thomas-
material brass, chromed ball, PTFE-seal Part No. KNI 18T KNI 14T KNI 38T KNI 12T KNI 34T KNI 10T KNI 54T KNI 1ST KNI 20T
working pressure 600 psi WOG 600 Port Diameter .314 .314 .393 .590 .787 .984 1.259 1.574 1.968
Price $

"ECONOMY", Ball Valve Series Size 1/2 3/4 1 1 1/4 1 1/2 2

double female type, handle stop, Thomas-Part No. KNI12TR KNI 34 TR KNI10TR KNI 54 TR KNI15TR KNI 20 TR
material brass, chromed ball, PTFE-seal, Port Diameter .393 .590 .787 .984 1.259 1.574
working pressure 600 psi WOG 600 Price $

Universal Couplings, Standard Hose Barb 3/8 1/2 3/4 1

with two lug, hose ends, Thomas-Part No. SKA 11 SKA 13 SKA 19 SKA 25
malleable iron/plated DIXON-Part No. AMH AM-1 AM-6 AM-11
Le-Hi-Part No. UH-37-M UH-50-M UH-75-M UH-100-M
Price $

Universal Couplings, Female Thread Size 3/8 NPT 1/2 NPT 3/4 NPT 1 NPT
with two lug, female N.P.T. ends, Thomas-Part No. KIA38 KIA12 KIA34 KIA10
malleable iron/plated DIXON-Part No. AMC AM-3 AM-8 AM-13
Le-Hi-Part No. UF-37-M UF-50-M UF-75-M UF-100-M
Price $

Universal Couplings, Male Thread Size 3/8 NPT 1/2 NPT 3/4 NPT 1 NPT
with two lug, male N.P.T. ends, Thomas-Part No. KAA38 KAA12 KAA34 KAA10
malleable iron/plated DIXON-Part No. AMB AM-2 AM-7 AM-12
Le-Hi-Part No. UM-37-M UM-50-M UM-75-M UM-100-M
Price $

Dead End Thomas-Part No. UDM

with two lug, DIXON-Part No. AM-0
malleable iron/plated Le-Hi-Part No. UD-301-M
for all sizes of Universal Couplings Price $

Three-Way Connection Thomas-Part No. TWC

with two lug, DIXON-Part No. AM-10
malleable iron/plated, Le-Hi-Part No. UW-300-M
for all sizes of Universal Couplings Price $

Super-Safety Coupling Size Stand. Hose Barb 3/4 Male Thread 3/4
with two lug Thomas-Part No. SSC19 SSCM 34
• Easy to couple by rotating the swivel Price $
• Interchangeable with Universal Couplings
(also available with steam-resistant washer)
• Special safety against accidents

Washers, oil resistant for Super-Safety Couplings Part No. TGOOR Price $

Washers, oil resistant for Universal Couplings Part No. TGOORR Price $

Washers, steam resistant for Universal Couplings Part No. GDOR Price $

Universal Safety Clips for Universal Couplings Part No. USC Price $

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 28
Clamps for Hose I.D. 1/2 3/4 3/4 1 1-1/4 1-1/2 2 2
Universal Hose Hose O.D. 13/16-1 1/16 13/16-15/16 15/16-11/2 13/8-13/4 2 1 / 1 6 - 2 1 / 4 21/4-27/16 29/16-23/4 2 5 / 8 - 3
2 Bolt 2 Bolt 2 Bolt 2 Bolt 4 Bolt 4 Bolt 4 Bolt 4 Bolt
Couplings, Thomas-Part No. CB-4 BU-9 CB-9 BU-10 CB-19 BU-24 CB-25 BU-29
Malleable iron/plated Price $

Hose O.D. 7/8-1-1/8 1-1/8-1-5/16 1-1/4-1-9/16 1-9/16-1-15/16 1-7/8-2-3/8 2-3/8-3

Hose Clamps Thomas-Part No. SL29 SL34 SL40 SL49 SL60 SL76
Price $
(double bolt clamps),
Hose O.D. 3-1/16-3-11/16 3-11/16-4-1/2 4-7/16-5 5-5/16-6-1/16 6-1/8-6-7/8 6-15/16-7-5/8
Malleable iron/plated
Thomas-Part No. SL94 SL115 525 600 675 796
Price $

Combination Sizes 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2

Thomas-Part No. STL-1 STL - 5 STL -10 STL -15 STL - 20 STL - 25 STL - 30
Hose Nipples DIXON-Part No. ST-1 ST-5 ST-10 ST-15 ST-20 ST-25 ST-30
Le-Hi Part No. CN-50-S CN-75-S CN-100-S CN-125-S CN-150-S CN-200-S CN-250-S
male N.P.T., Price $
plain finish steel
Sizes 3 4 5 6 8 10 12
"steel plated, Thomas-Part No. STL - 35 STL - 40 STL - 50 STL - 60 STL - 80 STL -100 STL -120
stainless steel #316, DIXON-Part No. ST-35 ST-40 ST-50 ST-60 ST-80 ST-100 ST-120
aluminum and Le-Hi Part No. CN-300-S CN-400-S CN-500-S CN-600-S CN-800-S CN-1000-S CN-1200-S
brass nipples on request" Price $

Hose Menders Standard Hose Barb 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Thomas-Part No. HM38 HM12 HM34 HM10 HM125 HM150 HM200
steel/plated DIXON-Part No. DMB DM-1 DM-6 DM-11 DM-16 DM-21 DM-26
i _ i i: n _ * M_ t 1 r\-i r> 1 1 rn O 1 1 -ir O n j nn O M( ^ nr O 1 1 ^ rr\ O

Steel Hose Nipples, plated

-2L-SERIES
Standard Hose Barb 1/4 1/4 1/4 5/16 3/8 3/8 3/8 3/8
Male Thread Size 1/8 NPT 1/4 NPT 3/8 NPT 1/4 NPT 1/8 NPT 1/4 NPT 3/8 NPT 1/2 NPT
Thomas-Part No. 2L-23 2L-25 2L-26 2L-27 2L-28 2L-30 2L-31 2L-35
DIXON-Part No. KHN212 KHN 222 KHN 322 KHN 332 KHN 342
Le-Hi Part No. AB-4x2-S AB-4x4-S AB-4x6-S AB-6x4-S AB-6x6-S AB-6x8-S
Price $

Standard Hose Barb 1/2 1/2 1/2 1/2 3/4 3/4 1 1

Male Thread Size 1/4 NPT 3/8 NPT 1/2 NPT 3/4 NPT 1/2 NPT 3/4 NPT 3/4 NPT 1 NPT
Thomas-Part No. 2L-40 2L-41 2L-42 2L-45 2L-50 2L-51 2L-62 2L-63
DIXON-Part No. KHN 422 KHN 432 KHN 442 KHN 462 KHN 642 KHN 662 KHN 862 KHN 882
Le-Hi Part No. AB-8x4-S AB-8x6-S AB-8x8-S AB-8x12-S AB-12x8-S AB-12x12-S AB-16x12-S AB-16x16-S
Price $

-3L-SERIES
Standard Hose Barb 1/4 1/4 1/4 5/16 3/8 3/8 3/8 3/8
Male Thread Size 1/8 NPT 1/4 NPT 3/8 NPT 1/4 NPT 1/8 NPT 1/4 NPT 3/8 NPT 1/2 NPT
Thomas-Part No. 3L-23 3L-25 3L-26 3L-27 3L-28 3L-30 3L-31 3L-35
DIXON-Part No. 3501 3502 3504 3505 3506 3508
Le-Hi Part No. N-4x2-S N-4x4-S N-4x6-S N-6x4-S N-6x6-S N-6x8-S
Price $

Standard Hose Barb 1/2 1/2 1/2 1/2 3/4 3/4 1 1

Male Thread Size 1/4 NPT 3/8 NPT 1/2 NPT 3/4 NPT 1/2 NPT 3/4 NPT 3/4 NPT 1 NPT
Thomas-Part No. 3L-40 3L-41 3L-42 3L-45 3L-50 3L-51 3L-62 3L-63
DIXON-Part No. 3509 3510 3512 3511 3513 3514 3516 3518
Le-Hi Part No. N-8x4-S N-8x6-S N-8x8-S N-8x12-S N-12x8-S N-1 2x12-S N-1 6x1 2-8 N-1 6x1 6-8
Price $

prices of other sizes upon request

29 D & L THOMAS EQUIPMENT CORP.
 'BOSS" COUPLINGS
'GJ-BOSS" GROUND JOINT SEAL, Swivel Nut Coupling, Style X-34

PLATED STEEL & MALLEABLE IRON

N.P.T. Wing Nut NPT. Wing Nut Win Nit Wing Nut

tf
Thread Thread Tfcm< Thread
Jim •^^k j l 1

I
1 <J!F
Steel or Steel or Steel or
Mat Iron Mat Iron MaL Inn

COUPLING WITH COUPLING WITH WING FEMALE MALE DOUBLE

FEMALE SPUD MALE SPUD STEM NUT SPUD SPUD SPUD
No
Part Per Part Part Part Part Part Part
Sizes: Number Carton: Number Number Number Number Number Number
1
/4" GF-1 MG-1 GBA BA-2 GBC GMB
%" GF-3 MG-3 GCA CB GCC GMC
w GF-6 25 MG-6 GB-1 B-2 GB-3 GM-3 GDB-3
3/4" GF-26 25 MG-26 GB-6 B-12 GB-8 GM-8 GDB-13
1" GF-36 25 MG-36 GB-11 B-12 JJB -13 GM -13 GOB-13
11/4" GF-51 12 MG-51 GB-16 B-17 GB-18 GM-18 GOB-23
1 1/2" GF-61 12 MG-61 GB-21 B-17 GB -23 GM-23 GOB-23
2" GF-81 12 MG-81 GB-26 B-27 GB-28 GM -28 GOB-28
2V 2 " GF-96 6 MG-96 GB-31 B-32 GB -33 GM •33 GOB-33
3" GF-1 11 6 MG-111 GB-36 B-37 GB -38 GM •38 GOB-38
4" GF-141 GB-46 B-47 GB-48
5" GF-171 GB-56 B-67 GB -58
6" GF-201 GB-66 B-67 GB -68

"BOSS" Male Stem, "BOSS" Clamps

MX-16 Continued...

Plated Mall.
STEM 2-Bolt Type Hose Hose O.D. Part No./
Iron
I.D. From: To: No.: Box:
Part 2Vie" B-24 25
Numbers: Hose Hose O.D. Part No./ 21/4" 21/2" 250 * 25
MSA I.D. From: To: No.: Box: 215/32 223/32" B-25 25
%" MSC 1
/4" 9
/16" 21
/32" BD 25^ 21/2" ~2 2 %2" BU-29 25
V2 MS-1 25 CD 25 21/2" 23/4" 275 * 25
%" MS-6 25 15
/ie DD 25 23A" 3Vi6 B-29 25
1" MS-11 25 1Vi 6 " B-4 25 23/4" 3Vie" 3O6* 25
1 ;/
1
1 /4 MS-16 25 B-5 25 3 /16 3V2 35O * 25
1V2 MS-21 25 3/4" T3/16" BU-9 25 33/32'' 37/ie B-30 25
2" MS-26 25 3
/4" 11/2 B-9 25 31/2" 3% 375*
21/2 MS-31 6 3/4" e B-10 25 21/2" 31/2" 315/ie" B-34
3 MS-36 6 4" 4O1
4 MS-46 Pltd. Mall. Iron *4- Bolt Type 3" 313/ie" 43/ie" B-35
5 MS-51 with 4 Gripping 4" 43/ie" 418*
6 MS-66 Fingers 3" 4Vi6" 47/i6" B-39
43/ie" 41/2" 450 *
4-Bolt Type
LP-BOSS" Male Stem, with 2 Gripping
Style LP Fingers Three-piece, six-bolt "BOSS" Clamps
Non-Porous Tubular Steel for O.D.
Volatile Materials. To: Plated
1 1/32" Malleable
STEM 1" 113/32" 19/16" 156 25 Iron
1" 1 17 /32" 1 23 /32" BU-14 25
Hose Hose O.D. Part No./
1" 1 %" 127/32" B-14 25 I.D. From: To: No.: Box:
Sizes: Part Numbers: 111
/16" 7
1 /8" 187 * 25
2" " 3" 37/ie BS-29 ____
11/4 LP-16 1 17/8" B-15 25
4 41/4" 413/ie BS-39
1V2 LP-21 7
1 /a" 2Vie 2O6* 25
4' 4 /8" 7
5V4 BS-49
2" LP-26 21/8" 21 2 25
4" 51A" 519/32" BU-49
2V2 LP-31 2W B-19 25
517/32" 515/ie" B-49
3 LP-36 21A" 225* 25
_ 6 /8" 7%" 750*
7

4 LP-46 23/32" 29/32 BU-24 25

6 7 /2" 8"1
850*
Brass and stainless steel. .on application.

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 30
 nn
UL

SELECTING/SIZING A HEDLAND PNEUMATIC FLOW METER

Hedland Pneumatic Flow Meters are offered in Aluminum, Brass and INLET PRESSURE
Stainless Steel to monitor a wide range of compressed gases.
Aluminum is offered in three different models, as a rugged, low cost
flow meter for use with air and many other noncorrosive gases. In ad-
dition to the traditional Hedland flow meter design, Aluminum units are
now available with an integral pressure gauge, mounted directly in the
flow meter inlet port. A third model series offers the extended inlet cap,
with a plugged 1/4" NPTF port to allow field-installation of pressure
gauge.
Brass models are offered for applications where galvanic corrosion
could become a problem, such as in systems using copper or brass
components, in the presence of an electrolyte, such as water.
Stainless Steel is available for monitoring caustic or corrosive gases,
such as hydrogen chloride or sulfur dioxide. Consult the factory for
further information on your specific media.

SPECIFICATIONS:
MATERIAL: Anodized Aluminum body, with Nickel Acetate-sealed An-
odized Aluminum Cone and Piston (except 1/2" series-Celcon Cone),
ORDERING INFORMATION:
Mode! Number Dimensions
Stainless Steel Springs and Nickel-plated Alnico Magnet.
Row* w/Plugged w/Gauge O.D. Length Weight
PRESSURE RATING: Flow Meter body is 600 PSI-Rated, with 10:1 Port Range" Gauge Port Installed In In Wrench (Ibs.)
Safety Factor. Total Assembly is limited by 150 PSI-Rated Pressure Size @ 100 PSI NPTF NPTF (mm) ImrnT Flats w/piu,
1- 4 SCFM 277-004 279-004 1.4" 6.3" 1-1/4" 0.5 1.2
Gauge. For higher pressures, consult factory.
1/4" 2- 9 SCFM 277-009 279-009 (35 mm) (160mm)
PRESSURE DROP: See A P Charts 2- 18 SCFM 277-018 279-018
4- 24 SCFM 277-024 279-024
TEMPERATURE RATING: 240T. Max. (except 1/2" series-1 SOT.) For
2- 20 SCFM 677-020 679-020
higher temperatures, consult factory. 1/2- 10- 60 SCFM 677-060 679-060 1-5/8* 1.0 1.75
STANDARD SCALE: Multipressure Flow Scale standard. Calibrated 10- 110 SCFM 677-110 679-110 (46 mm) (203 mm)
20- 150 SCFM 677-150 679-150
in graduated SCFM (Standard Cubic Feet/Minute) at 1.0 Specific Grav- 4 - 18 SCFM 777-018 779-018
ity at various pressure levels from 40 to 130 PSIG, @ 70°F. 5 • 50 SCFM 777-050 779-050
3/4- 10- 90 SCFM 777-090 779-090 2' 1.75 2.3
THREAD: National Pipe Thread-Dry Seal (NPTF) standard. 25- 150 SCFM 777-150 779-150 (58mm) (224 mm)
METER GUARD & SCALE KIT: For Meter Guard & Scale Kits, Seals, 20 - 220 SCFM 777-220 779-220
and other replacement components, see "Parts and Accessories" sec- 20- 250 SCFM 877-250 879-250
25- 450 SCFM 877-450 879-450
tion in the Price & Availability Digest, Form 000141. 1-1/4" 50- 600 SCFM 877-600 879-600 2-1/2" 7.0 7.5
PRESSURE GAUGE SPECIFICATIONS: Model Series #279, 679, 50- 800 SCFM 877-800 879-800 (102mm) (325 mm)
100 -1000 SCFM 877-100 879-100
779 & 879 are offered with a Glycerin-dampened Bourdon Tube-type
' Indicate? Plow Range is nominal, calibrated 2 100 PSIG. at 70° F
Gauge, with a 250° sweep analog dial, with a 40-130 PSIG pressure
indication range. Model Series #277, 677, 777 & 877 are offered with a
removable 1/4" NPTF plug to facilitate easy field installation of user-
selected pressure gauge.

prices of other sizes upon request

31 D & L THOMAS EQUIPMENT CORP.
 TANNER'S
COMPACT DE-ICERS
Big De-icers in Small Packages.

These Tanner De-icers are engineered for

use with air lines up to two inches.

Compact design for easy

installation
Equally effective with electric-or
engine-powered services
Install easily
Stationary or portable
applications
Durable, safe & dependable
Six models
Which Tanner De-icer is Right for You?

Container Sizes Shipping Weight 11 71/2 15 1/2 3-5 110 5

Tannergas 1/2 T-81 279 190 6.8 1.9 .08-.14 3.1 18.9
Gallons (Liters) Lbs. (kg.)
For Use in
Tanner Tanks 5 (18.9) 38.5 (17.4) 101/4 5/12 7 1/4 3-5 180 5
and Compact
De-icers Only.
30 (113.6) 226 (102.5) 3/4 T-90 260 140 3.2 .95 .08-.14 5.1 18.9
54 (204.4) 407 (184.6)
12 71/2 16 1/2 3-5 350 5
1 T-83 304 190 7.2 1.9 .08-.14 9.9 18.9
19 11 1/2 25 2 3-5 350 10
1 T-85 483 292 11.3 7.6 .08-.14 9.9 37.8
19 11 1/2 25 2 27.5 1120 15
2 T-87 483 292 11.3 7.6 .78 31.7 56.8
24 161/2 54 5 27.5 1120 30
2 T-89A 610 419 24.5 18.9 .78 31.7 113.6

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 32
 Lubricants

Part
General Service Lubricants Size Number
Motor Oil-High Detergent 1 qt. 15-40WT 15-40W-1Q
Dexron Automatic Trans. Fluid 1qt. TATF-1Q
Marfax Grease 14oz. cartridge TMARFAX
Methanol for Air Lines 1 gallon TMETH-1
Ether Starting Fluid TETHER-8
Anti-Freeze 1 gallon TAF-1
Plastigear-x 12 oz. cartridge Plastigear-x
Red Drydene Grease 12 oz. cartridge Pyroplex EP
Splitter Hydraulic Fluid 1 gallon Rand oz. 15-1

Hydraulic Oil Winter Grade 1 gallon DTE15-1

Mobil DTE ISA 55 Gal. Drum DTE15-55
High Viscosity Mineral Summer Grade 1 gallon DTE18-1
Based Oil. Product 55 Gal. Drum DTE18-55
not determined hazardous
in accordance with
OSHA-29(CFR1910.1200)

Ice Free Oil is used in all pneumatic 1 pt. / 1 liter ICE FREE OIL
tools especially where icing prob-
lems occur. Digtec Ice Free Oil pro-
vides protection against wear and
corrosion, even in Rock Drill Ham-
mers, it has extra high film strength
and remains fluid in -55°.

Air Tool Oil 1 lit (0.22 Imp. gal) 8099-0202-36

5 lit can (1.1 Imp. gal) 8099-0202-02
Atlas Copco's AIR-OIL is a synthetic
25 lit can (5.5 Imp. gal) 8099-0202-20
oil that incorporates the necessary 200 lit drum (44 Imp. gal)
properties for keeping your equip-
ment in top working order. Use of
an SLG lubricator with AIR-OIL is far
more of an economic proposition
than ordinary lubrication with a min-
eral oil.

Excellent lubrication and corrosion-resistant properties

Icing risk eliminated
Suitable for temperatures from -30°C to +50°C
Harmless to the environment (biologically decomposable)
Minimal dosage—good economy

prices of other sizes upon request

33 D & L THOMAS EQUIPMENT CORP.
 Lubricants

Part
Description Size Number
Rock drill oil. Heavy duty, extremely 100WT1 gal. RDO100-1
high film strength to minimize friction 100WT55gal. RDO1 00-55
and wear. Provides effective lubrica- 320 WT 1 gal. RDO320-1
tion in the presence of water. Resists 320WT 55 gal. RDO320-55
oxidation and gumming. Winter and
summer weights.
Non-returnable drums.

"D & L" super drill bit and coupling 11 oz. tube CARTL-1
lube. This product will prevent sei-
zures and thread damage on sectional 1 case of 25 ? CARTL-25
drill rod assemblies up to 300,000 PSI. Cartridge cradle CARTCR
Fingertip control eliminates undue
dust contamination and waste. Excel-
lent water resistance. This product is
pumpable to -5°F with exceptional re-
sistance to high temperatures. Your
satisfaction is guaranteed.

"D & L" super drill. Bit and coupling 5 Gal. Pail CL5
lube. Prevents seizures and thread
damage on sectional drill rod assem-
blies up to 300,000 psi. Excellent
water resistance. Pumpable to -5°F.
Exceptional resistance to high tem-
peratures.

"Elco" super lube paste. Specially 1/2 pint SLP50

made for Darda splitters. 1 pint SLP100
Soft, spreadable, non-soiling paste is
a galling inhibitor: Water stable and
protects against corrosion. Working
temperature range -30° to 180°C.
Simply wipe or brush.

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 34
 Air Grinders
and Accessories

Description Number
TMG1B die grinder. Ball bearing TMG-1B
supported four vane motor. Smooth
running, lightweight. 20,000 RPM, 1/
4" collet can be used with 1/8" collet.
Self-closing lever throttle. Hose in-
cluded.

"Uryu" heavy duty straight grinder, le- TUG-2000L-31

ver type. Aluminum alloy casing.
Highly sensitive governor. 3,100
RPM. Wheel size: 8" x 3/4" x1". 90
PSI. Coupling and guard included.

Die grinder wheels. Excellent all-

round stone for detailed work. Avail,
in two sizes. 1 1/4"x1"x1/4" TDG125
2" x 3/8" x 1/4" TDG200

Grinding wheels. The best. For car- TGW8-1-75K

bide. Sharpening grain & grade:
Green Silicone. 2,865 RPM, Portable
8" x 1" x 3/4" or 8" x 1" x 5/8" - course;
medium and fine grit.
Case discounts available.

prices of other sizes upon request

35 D & L THOMAS EQUIPMENT CORP.
 Diaroc/Borroc Grinding System
for tungsten carbide button bits

Part
Description Size Number
"Thomas" button bit grinder can improve Grinder THG105
your tungsten carbide bit life by an amazing
200%!! This high-speed top-of-the-line grinder Super Diaroc Sharpening Pins
utilizes central water flushing and will restore Ballastic Style
worn tungsten carbide buttons to factory new 6 mm 2000-06 2000-06B
profiles. Increase your profits with an efficient, 7 mm 2000-07 2000-07B
reliable, easy to use tool. 8 mm 2000-08 2000-08B
90-115 PSI, 30CFM, 22,000 RPM, Wt. 8 Ibs. 9 mm 2000-09 2000-09B
10 mm 2000-10 2000-1 OB
Super Diaroc Grinding Pins offer 25-35% higher 11 mm 2000-11 2000-11B
penetration from 2 1/2" bits and larger. You will 12 mm 2000-12 2000-12B
get higher overall production and very little pres- 13 mm 2000-13 2000-13B
sure is required to make these tools cut. Con- 14 mm 2000-14 2000-14B
sider the obvious benefits and rewards of a bit 15 mm 2000-15 2000-15B
grinder. 16 mm 2000-16 2000-16B
17 mm 2000-17 2000-17B
Super Diaroc: A combination pin which grinds 18 mm 2000-18 2000-18B
the carbide button as well as the body, at the 19 mm 2000-19 2000-19B
same time. 20 mm 2000-20 2000-20B
22 mm 2000-22 2000-22B
Super Diaroc Pins also available in conical or 25 mm 2000-25 2000-25B
ballastic designs.
SUP DIAROC: A Combination Pin, which
grinds the button as well as the body, at the
same time.

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 36
 Ultra Blastmat
D & L Thomas is now the U.S. distributor of the "new" truck tire style flat Rubber Blasting
Mat. See the features of the Ultra Blastmat now available.

The Ultra Blastmat is a premier quality blasting mat that ha

OnlyllllH

• 10 inches thick (25cm)

• 10 feet (3m) wide by 15 feet (4.5m) long
• Approximately 50 Ibs. (25kg) per Sq. Ft.

Mats can be custom built to fit yourapplications

37 D & L THOMAS EQUIPMENT CORP.

 Blasting Mats

Size & Part Size & Part

Description Cable Number Number

Rubber blasting mats ruggedly 5/8" X 3/4" RBM0508M RBM1020M

built to form a thick, rubber, RBM7.510M RBM1212M
protective covering for all RBM7.512M RBM1215M
types of blasting operations. RBM7.515M RBM1220M
Construction is of individual RBM7.520M RBM1515M
rubber segments woven to- RBM1010M RBM1520M
gether with wire cable. Will not RBM1012M
short out blasting caps, easy RBM1015M
to handle, deadens noise and
are flexible.

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 38
 Blasting Mats

Part
Description Cable Size Number

Steel blasting mats. Closely 5/8" X 5/8" 4'x6' SBM0406

woven wire rope mats which 4'x8' SBM0408
incorporate features for all 8'x10' SBM0810
your blasting requirements. 8'x12' SBM0812
Made of selected 1/2" and 5/ 10'x10' SBM1010
8" construction. Any special 10'x12' SBM1012
sizes or construction required 12'x12' SBM1212
can be made to order. 12'x15' SBM1215

prices of other sizes upon request

39 D & L THOMAS EQUIPMENT CORP.
Stemming Bags
Paper stemming bags are made of 25# Kraft
paper. Standard sizes in stock and we can
order special sizes for those special projects.

P/N DESCRIPTION PER BUNDLE HOLE SIZE

SB2 2 " x 18" 1000 1-1/4"
SB2.5 2-1/2" x 18" 1000 1-1/2"
SB3 3 " x 18" 1000 2"
SB3.5 3-1/2" x 1 8 " 1000 2-1/4"
SB4 4 " x 18" 1000 2-1/2"
SB4.5 4-1/2" x 1 8 " 1000 2-3/4"

Hole Liners & Tamping Bags

Hole liners are low density poly tube available in 2 mil
to 8 mil thickness with layflat sizes from 2" to 24" on
continuous 750' rolls or custom rolls perforated at
desired lengths. Custom length hole liners with V
pocket or square pocket also available.

15100 Hole Liner

Poly tamping bags are available in 2 mil standard.

Thicker mils up to 4 mil also available. Sizes avail-
able range from 2" lay flat up to 24" lay flat.

39209 Poly Tamping Bags (not pictured)

Power Plug™/Hole Saver™ Inflation Kit-

The Hole Saver™ and Power Plug™ require precise psi
inflation. This Inflation Kit provides 50 ft. of heavy-duty air
supply hose with a trigger type valve and accurate, easy-
to-read pressure gauge for on-the-job inflation...from either
truck or drill air supply or with the Blaster Portable Air Tank.
All fittings are "quick-connect" type. Inflation end of hoses
are designed to inflate through either a needle valve or open
(oral) valve.
40007 Power Plug™/Hole Saver™ Inflation Kit. Sh. Wt.
18lbs.

Blasters Order now and you'll never again be without compressed

air for Power Plu
Portable 9™and Hole Saver™ inflations.
Air Tank These take-everywhere tanks provide you up to 125 psi of
air before refilling. Features include: brass air line, shut-off
valve with pressure relief valve, 160 psi pressure gauge,
and 6-foot air hose with air chuck.
60041 Blasters Portable Air Tank. Sh. Wt. 26 Ibs.

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 40
 ~ ^^ — — ~ ' ~ ^z^ ^^. — ~ ' Tftfl

IMPACT BREAKER MODEL 102

LOW COST ALTERNATIVE

TO CONVENTIONAL BREAKERS
SIMPLE DESIGN DELIVERS
CONTROLLED IMPACT
PRODUCES 1450 FT LBS
ENERGY PER BLOW PartNo.:M102

UTILIZES STANDARD SPECIFICATIONS

JACKHAMMER TOOLS YOU WEIGHT:. ..............20 LBS
ALREADY OWN LESS TOOL
CLOSED: .36-1/4 INCHES
LENGTH LESS TOOL
ENERGY PER: ...... 1450 FT LBS
BLOW AVERAGE
TYPICAL JOB APPLICATIONS
TOOLS:.............. ALL STANDARD
+• BREAKING CONCRETE 1-1/8 INCH HEXAGON.
* CUTTING ASPHALT TOOLS CAN BE CHANGED
IN LESS THAN A MINUTE.
* TAMPING DIRT
UTILIZES A CONVENTIONAL
*• CHOPPING ROOTS TOOL RETAINING DEVICE.
^ DIGGING HOLES
^ DRIVING STEEL POSTS
*» SPLITTING WOOD

NOTE: NEVER OPERATE THIS TOOL WITHOUT PROPER

SAFETY EYEWEAR. CAUTION ALL ONLOOKERS TO
REMAIN CLEAR OF FLYING DEBRIS.

All specifications are general in nature and are not intended for specific
application purposes. Redro, Inc. reserves the right to make changes in
design, engineering or specifications and to add improvements or
discontinue manufacturing at any time without notice or obligation.

prices of other sizes upon request

41 D & L THOMAS EQUIPMENT CORP.
 TOYO
ROCK DRILL

Specifications
^^^^Specification Weight Length Cylinder Dia Piston Stroke Steel
Machine Name^^^^^^^^ Ib. (kg) in. (mm) in. (mm) in. (mm) in. (mm)

TY40C-JS Stoper 91.5(41.5) 59-1/1 6" (1,500.0) 2-5/8" (66.7) 2-1 1/1 6" (68.0) 7/8" (22) Hollow Hex

TY280-JS Stoper 110.2 (50) 89-3/8" (2,270.0) 3" (76.0) 2-11/16" (68.0) 7/8" (22) Hollow Hex

Shank Size Air Hose Dia Water Hose Dia Drilling Type
in. (mm) in. (mm) in. (mm) (Wet & Blower)

7/8" (22) Straight Shank 3/4" (19) 1/2" (12.7) Wet

7/8" x 4- 1/4" ( 2 2 x 1 08) 3/4" (19) 1/2" (12.7) Wet

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 42
 Hand Tools
Part
Description Number Price

"Thomas" S55 rock drill. Ver- TTS55

satile unit to handle a wide
range of tough drilling. 7/8" or
1" Hex Chuck. 60 Ibs.

A really tough & dependable -

and economical 55# Rock
Drill. Our #1 Jackhammer
used in both construction &
rentals. Withstands all of the
rigors of everyday use. Will
handle all your tough jobs with
ease!

Blows Per Speed Piston Piston Overall Hose Shank Air Recommended Minimum Net Wt. Ship Wt.
Minute (RPM) Dia. Stroke Length Size Size Consumption Air Pressure Compressor (Ibs.) (Ibs.)
1,800 200 2-5/8" 2-9/16" 22-3/8" 3/4" 95CFM 90 PSI 15 HP 59-1/2 63

prices of other sizes upon request

43 D & L THOMAS EQUIPMENT CORP.
 Rock Drills
Chicago Sinker Drills
Pneumatic Rotary Hammers

CP-0032A-1

CP-0014RR CP-0022

These versatile tools are both a drill

and a chipping hammer. A push of
the rotation release button easily
and quickly converts the tool to a
hammer. CP-0022 Sinker Drill
CP-0009A
Applications: The CP-0009 and 30-Pound Class—The CP-0022
• right-hand rotation for use with
CP-0014RR rotary hammers are provides drilling capability for holes
electric rotary hammer drill bits as Applications: Chicago Pneumatic
designed for a wide variety of up to 1 1/2" diameter, 6' deep. This
construction and maintenance
well as traditional CP tungsten Sinker Drills are the ideal tools for
carbide steels (CP adapter is is the ideal choice where a
applications such as driving or your drilling operations. Their lightweight and powerful tool is
required for use with electric streamlined design incorporates
setting masonry anchors and drilling needed in public works, utilities and
rotary hammer drill bits) smooth contours, a side exhaust
holes in concrete, bricks or rock. As drilling from scaffolding. Also the
a hammer, these tools can be used CP-0009A Kit (Designate CP- and a "flat back" that makes them correct choice where air supply is
for chipping, scarifying, scaling and 0009AK) easy to handle in quarry, mine and limited. Spring retainer used for
cleaning welds. • Includes CP-0009A tool and general excavating work. The quick steel changes.
basic accessories needed for design also provides a main valve
Features—All Models CP-0032A Sinker Drill
safe and efficient operation. and cylinder porting concept that
• excellent power-to-weight ratio helps maintain constant drilling 45-Pound Class-Choose the CP-
Carrying case has adequate
helps drill holes faster and easier speed throughout a long service life. 0032A for holes up to 2" diameter
space for additional accessories
than comparable electric rotary Working parts are constantly and 10' deep. Atop performer in its
Contents (includes one each):
hammers protected with an effective class, the CP-0032A is highly
CP-0009A Mandril
• built-in oiler provides continuous lubrication system. Standard and effective in general excavation work,
lubrication C-133893 Goggles
P-137646 Pint of Airoilene Oil "Hushed-Power" types are available quarry drilling, bench mining and
• teasing throttle for precise control in a range of weights and sizes to fit other jobs requiring a sinker in the
R-048721 1/2" Tungsten Carbide
• rotation release button converts any requirement you might have. 45-pound class. The tool's durable
Steel
tool to a hammer "Beavertail" retainer helps it deliver
R-137701 Metal Carrying Case Features—All Models
• cushioned piston for smooth increased contact and reduces
operation, long life • forged steel housings withstand collar wear.
• "Hushed Power" muffler available rugged use
to reduce noise • cushioned piston reduces shock CP-0069 Sinker Drill
• multiposition throttle for easy 55-Pound Class—The CP-0069 is
CP-0009A, CP-0009F, CP-0014RR: %" (NPTF) air inlet thread. CP-0009BS, CP-0009CS, starting of holes suited for drilling 2-1/2" diameter
CP-0009ES, CP-0014RRBS: %" (BSP) air inlet thread. Air consumption at 90 psi: CP-0009
20cfm;CP-001432cfm. • blower lever for deep hole holes 20' deep. The heavy-duty CP-
Net Weight Net Weight Overall T cleaning, except CP-0022 0069 Sinker is a hard hitting tool
Catalog
Ib. Ib.
(kg)
Length
in.
ffi?
in. Rotation
• integral oiler provides continuous that combines high drilling speed
Number Tool Only Kit Complete (mm) (mm) Release lubrication with excellent hole cleaning ability.
CP-0009At 8 — 143/4 % round x Yes • air inlet swivel improves Its trouble-free "Beavertail" retainer
(3.6) (374. 7) 3% shank
(19 x 95.2; maneuverability provides greater front-end durability
CP-0009AKt 22 — 3
/4 round x Yes and increased collar contact to
(Kit)
~ (10) 3% shank
(19 x 95.2)
reduce wear.
3
CP-0009BS* 8 14% /4 round x Yes
(3.6)
~ (374. 7) 33/4 shank
(19 x 95.2;
3 All Models: dry type; double-grip handles; %" (NPTF) swivel air inlet.
CP-0009BSK* /4 round x Yes Overall Length Standard Hex.
(Kit) ~ ~ 3% shank
(19 x 95.2) Catalog
Net Weight
Ib.
with Retainer
in.
Chuck Size
in.
CP-0009CS* 8 14% % round x No Number (kg) (mm) (mm)
(3.6) ~ (374.7) 3% shank
(19 x 95.2;
30-LB. CLASS, A R CONSUMPTION: 56 CFM AT 90 PSI
28 7
19 /8
7
/8 X 31/4
CP-0009ES* 8 — 14% Spline Drive Yes CP-0022 (12.7) (504.8; (22.2 x 82.6;
(3.6) (374.7)
45-LB. CLASS, AIR CONSUMPTION: 103 CFM AT 90 PSI
CP-0009Ft 8 — 14% Spline Drive Yes
ra.e; (374. 7)
CP-0032A-.87
54
(24.5)
22
(558.8; (22.2
7
/8 X 31/4
x 82.6;
7
CP-0014RRt 15 — 181/2 Spring /e hex Yes
(6.8) (469.9; x 31/4 shank 54 23 7
/8 X 41/4

(22.2 x 82.6; CP-0032A-.87A (24.5; (584.2; (22.2 x 7079;

Spring 7/e hex x 54 23 1 x 41/4
CP-0014RRBS* 15 181/2 Yes (584.2; (25.4 x 7079;
(6.8) (469.9; 3V4 shank CP-0032A-1 (24.5)
(22.2 x 82.6) 55-LB. CLASS, A R CONSUMPTION: 130 CFM AT 90 PSI
* Not available in U.S.A.; includes muffler, BSP air inlet. 64 241/2 1 x 41/4
f Unmuffled tools not sold in certain countries. Contact local CP representative for details. CP-0069 (29. 1) (622.3; (25.4 x 7079;

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 44
 Chicago Demolition Tools
Pneumatic
CP-1210, CP-1 230 & CP-1240 Breakers—Four Bolt
VIBRATION REDUCED 4-BOLT PAVING BREAKERS
Standard Features:
• 4-bolt, vibration reduced backhead design. CP-1210-S
• Alloy steel forging.
• Integral oiler.
• Heavy-duty front head springs.
• Reversible piston
• Air inlet swivel
• "Hushed power" muffler on "S" models. CP-1240
• Interchangeable backhead with standard models.
• Also available in 60 Ib. and 90 Ib. spike drivers.
Chicago Pneumatic is proud to introduce another break-
Breakers—Four Bolt
through in vibration reduced technology with our new CP Four-Bolt breakers require
line of 4-bolt, vibration reduced paving breakers. These minimal servicing to maintain peak CP-1230 and CP-1240
CP-1230VR operating efficiency over extended The CP-1230 (60-pound class) and
tools will significantly reduce vibration transmitted
periods of rugged use. CP-1240 (80/90 pound class)
through the handle without compromising the heard hit-
ting power that you've come to expect from CP. CP-0111 andCP-1210 demolition tools are designed to
Applications: The CP-0111 (25 deliver the power and durability
Specifications: pound class) and CP-1210 (35 necessary for a variety of
CP-1210 1/2" {NPTF) swivel air inlet;
pound class) demolition tools are construction and plant mainte-
CP-1230 and CP-1240 3/4" (NPTF) s
Net weight overall Length Chuck Size Shipping Wt. lightweight yet rugged tools nance applications such as
*53Z Retainer Ib. (kg.) in. (mm.) In. (mm.) lb.{kg.)
designed for light-to-medium- breaking heavy concrete,
CP-1210VR Latch 49 (22.3) 23.5 (596.9) 4 1/4(25.4x 107.9) 55 (25)
CP-1810VRS Latch 51 (23.2) 23.5 (596.9) 4 1/4 (25.4 x 107.9} 57 (25.9) construction and plant mainte- reinforced concrete, frozen ground,
CP-1230VR-1.12 Latch 74 (33,6) 27.5 (698.5) / 8 x 6 ( 2 8 . 6 x 107.9} 79 (35.9) nance work such as light macadam, boulders and pavement.
CP-1230VR-S1.12 Latch 76 (34.5) 27.5 (698.5) / 8 x 6 (28.6x1 07.9} 81 (36.8) demolition of floors, pavement, Features
CP-1230VR-1.25 Latch 74 (33.6) 27.5 (698.5) /4x 6 (31 . 8 x 1 07.9} 79 (35.9}
Latch
macadam, frozen ground and • alloy steel forgings—for
CP-12MVR-S1.25 76 (34,5) 27.5 (698.5) / 4 x 6 ( 3 1 . 8 x 107.9} 81 (36.8}
CP-1240VFM.12 Latch 92 (40.5) 30 (762) /8x 6 (28 . 6 x 1 07.9} 95 (43.2)
masonry walls. These tools are excellent durability
CP-1240VR-S1.12 Latch 95(41.8) 30 (762) /8 x 6 (28.6 x 1 07.9) 98 (44.5) very popular for bridge deck jobs. • four-bolt backhead—withstands
CP-1240VR-1.25 Latch 92 (40.5) 30 (762) /4x 6 (31 . 8 x 1 07.9) 95 (43.2) CP-0111-THLA-EX has extended rugged use
CP-1240VR-S1.25 Latch 95(41.8) 30 (762) /4x 6 (31 . 8 x 1 07.9) 98 (44.5)
handle for trench work. • integral oiler—provides
Features continuous lubrication
Features • alloy steel forgings—provide • heavy-duty fronthead springs—
Clay Diggers/Picks CP-0111 excellent durability reduce shock
• heat treated alloy steel • four-bolt backhead design— • reversible piston—reduces
components provide excellent withstands rugged use maintenance cost
durability • integral oilers—provide • air inlet swivel—for easy
• latch retainer continuous lubrication maneuverability
CP-0222 • heavy-duty fronthead springs on • "Hushed Power" versions—CP-
• lightweight, compact, for easy CP-1210—reduce shock 1230-S and CP-1240-S are
handling • CP-1210-S equipped with a equipped with mufflers
• latch retainer "Hushed Power" muffler—to
reduce sound level. A "Hushed
CP-0220
Power" muffler also available for
• slim design allows tool to be used
close to sidewalls CP-0111.
• teasing throttle with inside trigger
CP-0222-CHIT for excellent control
• sleeve retainer with bumper holds
CP-0111: %" (NPTF) air inlet thread; CP-1210: 1/2" (NPTF) swivel air inlet;
accessory securely CP-1230 and CP-1240: %" (NPTF) swivel air inlet.
Clay Diggers/Picks
Applications: These tools are suited
FL-0022
• slim design allows work in tight Catalog
Number Retainer
Net
Weight
Ib.
(kg)
Overall
Length
in.
(mm)
Standard
Hex. Chuck Size
in.
(mm)
tap
Ib.
(kg)
space.
for trenching, tunneling, lateral and 25-LB. CLASS, AIR CONSUMP nON:45CF*A AT 90 PSI
• leasing throttle with outside trigger
overhead work and light demolition in CP-01 11-THLA Latch 30 20 1 x 41/4 36
for optimum control (13.6) (508) (25.4 x 707.9) (16.3)
construction applications.
• sleeve retainer with bumper holds CP-01 11-THLA-EX Latch 33 30% 1 x 41/4 39
accessory securely (15.0) (772) (25.4 x 707.9) (17.7)
35-LB. CLASS, AIR CONSUMP riON:48CFftH AT 90 PSI
CP-0111: air consumption at 90 psi 45 cfm, %" (NPTF) air inlet thread; CP-0220, CP-0222:
air consumption at 90 psi 44 cfm, Vz (NPTF) air inlet thread; FL-0022: air consumption at CP-1210 Latch 42 21 VB 1 x 41/4 47
90 psi 30 cfm. (19.0) (536.5) (25.4 x 707.9) (21.3)
Net Overall Standard CP-1 21 0-S* Latch 44 21 Ve 1 x 41/4 49
Bore and Stroke Length Chuck (79.9; (536.5) (25.4 x 707.9) (22.2;
Catalog in. Ib. In. in. 60-LB. CLASS, AIR CONSUMFDON: 63 CFnHAT 90 PSI
Number (mm) Throttle (kg) (mm) Retainer (mm)
CP-1 230-1. 12 Latch 61 261/2 11/e x 6 66
CP-01 11-CHLA 1.63 x 3.5 Outside 29 221/2 Latch 1 hex x 4V4 (27.7; (673.1) (28.6 x 752.4) (31.7)
Clay Digger (47.4 x 88.9) Trigger (73) (577.5) (25.4 x 707.9) 1
CP-1230-S1.12* Latch 63 26 /2 1 Ve X 6 68
CP-0222-CHIT 1.6 x 3.38 Inside 22 1
19 /2 Latch %hex x 31/4 (28.6) (673.1) (28.6 x 752.4) (32.2)
Clay Digger (40.6 x 85.9) Trigger (70) (495.3) (22.2 x 82.6) Latch 61 261/2 11/4 x 6
CP-1 230-1 .25 66
CP-0220-CHIT 1.6x3.38 Inside 22 21% Sleeve % square x 31A (27.7J (673.7) (37.8 x 752.4) (31.7)
Clay Digger (40.6 x 8S.-9) Trigger (70) (552.5) (79 x 82.6)
CP-1230-S1.25* Latch 63 261/2 1 1/4 x 6 68
FL-0022 1.6x3.38 Outside 21 19Va Sleeve % square x 31/4 (28.6) (673.1) (37.8 x 752.4) (32.2J
Clay Digger (40.6 x 85.9) Trigger (9.5) (495.3) (79 x 82.6) 80/90 LB. CLASS, fi IR CONSU MPTION: 81 CJFMAT90PS 1
CP-0220-COB-25RS* (1.6 x 3.38) Outside 22 21% Sleeve 1 round x 3 CP-1 240-1 .12 Latch 83 28% 1 Va X 6 89
Pick (40.6 x 85.9) Trigger (10) (552.5) (25 x 75) (37.6) (730.3) (28.6 x 752.4) (40.4)
CP-0220-COB-19SS* 1.6x3.38 Outside 22 21% Sleeve % square x 3V4 CP-1240-S1.12* Latch 86 28% 1 Ve x 6 92
Clay Digger (40.6 x 85.9) Trigger (10) (552.5) (79 x 82.6) (39.0) (730.3) (28.6 x 752.4) (42.6;
CP-0222S* 1.6 x 3.38 Outside 22 1
19 /2 Latch % Hex x 31/4 CP-1 240-1 .25 Latch 83 28% r/4 x 6 89
Versatool (40.6 x 85.9) Trigger (10) (495.3) (22.9 x 82.6) (37.6) (730.3) (37.8 x 752.4) (40.4)
FL-0022-FS* 1.6 x 3.38 Outside 23 1
19 /2 Sleeve % square x 31/4 CP-1240-S1.25* Latch 86 28% 1% x 6 92
Clay Digger (40.6 x 85.9) Trigger (70.4) (495.3) (79 x 82.6) (39.0) (730.3) (37.8 x 752.4) (42.6)

prices of other sizes upon request

45 D & L THOMAS EQUIPMENT CORP.
 Demolition Tools
Buster
Chicago
Pneumatic

Buster
Applications: Top performance
and operator comfort characterize
these tools; they are used for
cutting off large rivets and for
heavy-duty chipping work.
Features
• Boyer valve and long piston CP-4181-PUSER CP-4180-11
stroke—deliver the power
required to handle the toughest
All Models: air consumption: CP-4180-8 & CP-4181-PUSER 37 cfm at 90 psi; CP-4180-11 &
jobs CP-4181-PULER 38 cfm at 90 psi; type RB Chisel Shank; 3/8" (NPTF) air inlet thread.
• teasing throttle—precise control Capacity Rivet
• forged steel handle—designed entirig Bore and Overall Net
for long life under rugged Dteu Stroke Blows Length Weight
: ;
^ .: «v ! : ! j
. :IHi. • : • : • : : per WandteT : in. to,
conditions Catalog Number (mm) (mm) Minute Hrl^ger (mm) m
• hardened steel piston and CP-4180-S % 1His x:8 1080 Close**/ 23 32,5
cylinder—excellent wear (22.2) (30,2 x 203) Inside (584) (14.8)
resistance ; CP-4180-11 1 13/16 X 11 720 Closed/ 26 35.5
(25,4) (30.2x279) Inside \ (660) (16.1)
7
CP-4181-PUSER /$ Wie X 8 1080 Pistol/ 23 29
(22*2) (30,2 X 203) Outside (584) (13,2)
............. t ;
CP-4181-PULER mx 11 720 Pistol/ ' 26 33
(25.4) (30.2 X 279) Outside (660) (15.0)
Standard Equipment:
Two spare rubber bumpers, P-072334
Lower sleeve, P-072333
Upper sleeve, P-144720
RIVET BUSTER TOOLS Wire retainer spring, P-073942

ITEM LENGTH PART NUMBER WEIGHT

POINT 10" T21B10 2
12" T21B12 2-1/2
vo 18" T21B18 3-3/4
\o FLAT 10" T22B10 2
00• CHISEL 12" T22B12 2-1/2
18" T22B18 3-3/4

X
^H
SIDECUT
CHISEL
10"
12"
T23B10
T23B12
2
2-1/2
iH 18" T23B18 2-3/4
RIVET SIZE PART NUMBER WEIGHT
3/8" T24B10 2
BACKOUT 1/2" T25B10 2
—— 1-1/8" -

o
r| ^^———-^

CQ
5
PUNCH
10"
5/8"
3/4"
7/8"
T26B10
T27B10
T28B10
11X HEAT EXCHANGER TUBE BACKOUT PUNCHES
2
2
2

P CLEARANCE TUBE SIZE TUBE THICKNESS PART NUMBER WEIGHT

>-5 4" 3/4" 12ga. TF046F 1-3/4
te=r* 4" 1" 14ga. TF048H 1-3/4
6" 3/4" 12ga. TF066F 2
_ .866 — 6" 3/4" 14ga. TF066H 2
6" 1" 12ga. TF068F 2-1/4
8" 3/4" 12ga. TF086F 2-1/4
8" 3/4" 14ga. TF086H 2-1/4
OTHER LENGTHS AND TUBE SIZES AVAILABLE
ALL WEIGHTS ARE IN POUNDS UNLESS SPECIFIED
prices of other sizes upon request
D & L THOMAS EQUIPMENT CORP. 46
 Chipping Hammers
Chicago
Pneumatic

CP-4123-PYRA CP-4127

2-BOLT EXTRA HEAVY-DUTY

Features
• choice of valves: CHIPPING HAMMER
simplate—powerful, smooth running
hammer with excellent controllability Standard Features
ring valve—hard-hitting hammers
• Steel flange for increased durability and
CP-4123 which perform well in dirty
The CP-4127 Series Chipping Hammer strength, and easy serviceability
Applications: This heavy-duty tool is environments
has been designed to tackle punishing • Steel piston, cylinder and handle for extra
designed for rugged use in foundries, • teasing throttle—provides precise
jobs with the hard-hitting power that strength
fabrication shops and construction, control
you've come to expect from CP. Ev- • High strength 1 /2" socket head cap screw bolts
applications. The tool is available in 1", • spline lock—prevents loosening of
erything about the CP-4127 is heavy- • Screw-on retainer provides a positive lock
2", and 3" stroke versions which offer the handle/cylinder
duty, from the steel flange and high • User friendly ergonomic "D" handle with inside
power levels necessary for a variety of • forged steel handle—withstands
strength 1/2" bolts, to the steel piston trigger for increased hand protection
uses, from light to medium chipping and rugged use
and cylinder. The CP-4127 series chip- • Precise teasing throttle for maximum control
trimming through heavy cutting. • heat treated cylinders with chrome
pers may be used for medium to heavy- • Simplate valve for smooth powerful operation
plated bores—ensure excellent
Features duty chipping and trimming to heavy- • Moveable deflector allows exhaust to be di-
durability
• simplate valve—for smooth, powerful duty cutting. rected away from the operator
• choice of bushing: round—chisel
operation • Choice of round or hex bushing and 1", 2", 3"
freely rotates hex—prevents chisel
• rugged construction—hardened steel and 4" stroke to meet most job requirements
rotation
piston, cylinder and handle • Chromed inside retainer
• teasing throttle—for precise control Safety Information • Air lock-out mechanism for advanced safety
• clip lock—prevents loosening of • use impact resistant eye and face
handle/cylinder protection Specifications:
• use hearing protection All Models: 1/2" (NPTF) a sumption at 90 psi, 23-27 cfm
CP-4125
• use a retainer Bore Chisel Overall
Applications: This heavy-duty tool is • vibration absorbing handle covering Catalog and Stroke Blows per Bushing Length Net Weight
Ib. (kg)
Number minute
designed for rugged use in foundries, is available 1-1/8x 1 .680 (77.3) 14-1/4 1 5-3/4
shipyards, refineries, fabrication shops • wear gloves to prevent direct contact CP-41 27-1 RO (28.6x25.4) 2820 Round (362) (7.1)
and construction applications. Available with accessories or sharp edges of 1-1/8x1 .580 (14.7) 14-1/4 15-3/4
in 1" thru 4" stroke versions to offer the CP-4127-1HO (28.6x25.4) 2820 Hex (362) (7.1)
work piece
power levels necessary for a variety of • do not touch moving chisel 1-1/8x2 .680/7 7. 3) 15 16-3/4
CP-41 27-2RO (28.6x51) 2400 Round (381) (7.5)
uses from light and medium chipping • excessive or improper use may result
and trimming through heavy cutting. 1-1/8x2 .580 (74.7) 15 16-3/4
in "white finger" or carpal tunnel CP-41 27-2HO (28.6x51) 2400 Hex (381) (7.5)
syndrome 1-1/8x3 .680 ( 1 7. 3) 17 18-1/4
CP-41 27-3RO 1920 (432) (8.2)
• make certain chisel accessory is (28.6x76) Round
rated for use with these tools 1-1/8x3 .580 (14.7) 17 18-1/4
CP-41 27-3HO (28.6x76) 1920 Hex (8.2)
(432)
• disconnect air supply before 19-1/4
1-1/8x4 .680(17.3) 18-1/4
performing tool maintenance, CP-41 27-4RO (28.6x102) 1500 Round (464) (8.7)
changing accessories, or any time 1-1/8x4 .580(74.7) 18-1/4 19-1/4
CP-41 27-4HO 1500 Hex (464)
the tool is not being used (28.6x102) (8.7)
• provided with complete operation,
safety, parts, and maintenance
CP-4125
manual
Applications: This heavy-duty tool is
designed for rugged use in foundries,
shipyards, refineries, fabrication shops and
construction applications. Available in 2"
All Models: pistol grip handle with self-closing outside trigger; 3/8" (NPTF) air ir
air consumption at 90 psi, 23- 27cfm. thru 4" stroke versions to offer the power
Bore and Chisel Overall
levels necessary for a variety of uses from
Net
Stroke Blows Bushing Length Weight light and medium chipping and trimming
Catalog In. in. in. Ib. through heavy cutting.
Number (mm) MfrfJte (mm) (mm) (kg) Features
SIMPLATE VALVE
• ring valve—hard-hitting hammers which
CP-4123-PYBA 1
1 /8 X 1 2820 .680(77.3; 1
12 /8 12 perform well in dirty environments
(28.6 x 25.4) Round Type A-6 (308) (5.5)
• teasing throttle—provides precise
CP-4123-PYBE 11/8 X 1 2820 .580 (7 4.7) 121/8 12 control
(28.6 x 25.4) Hex. Type A-7 (308) (5.5)
• spline lock—prevents loosening of
CP-4123-PYRA V/aX 2 2400 .680 (77.3) 12% 13 handle/cylinder CP-4125-PALA
(28.6 x 51) Round Type A-6 (327) (5.9)
• forged steel handle—withstands rugged
CP-4123-PYRE 1 Vs x 2 2400 .580(74.7) 12% 13
(28.6 x 51) Hex. Type A-7 (327) use
(5.9;
• heat treated cylinders with chrome
CP-4123-PYSA 11/e x 3 1920 .680 (77.3) 14% 14V4
(28.6 x 76) Round Type A-6 (378) (6.5)
plated bores-ensure excellent durability
• choice of bushing:
CP-4123-PYSE 1 Vs x 3 1920 .580 (74.7) 14% 14V4
(28.6 x 76) Hex. Type A-7 (378) (6.5) round—chisel freely rotates
CP-4125-PYBA 2820 .680 (77.3)
hex—prevents chisel rotation
11/8 X 1 121/8 12
(28.6 x 25.4; Round Type A-6 (308) (5.5)
CP-4125-PYBE 1 1/8 X 1 2820 .580 (74.7) 12V8 12 Bore and Chisel Overall* Net*
Stroke Blows Bushing Length Weight
(28.6 x 25.4; Hex. Type A-7 (308) (5.5) Catalog in. In. in. Ib.
CP-4125-PYRA 11/8 x 2 2400 .680(77.3) 12% 13 Number (mm) Mmute (mm) (mm) (Kg)
(28.6 x 51) Round Type A-6 (327) (5.9) RING VALVE
CP-4125-PYRE V/sx 2 2400 .580(74.7) 12% 13 CP-41 25-PALA 1 Ve X 2 2100 .680 (77.3) 131/4 13
(28.6 x 51) Hex. Type A-7 (327) (5.9) (28.6 x 51) Round Type A-6 (337) (5.9)
CP-4125-PYSA 11/e x 3 1920 .680(77.3) 14% 141/4 CP-41 25-PALE 1 VB X 2 2100 .580 (74.7) 1
13 /4 13
(28.6 x 76) Round Type A-6 (378) (6.5) (28.6 x 57) Hex. Type A-7 (337) (5.9)
CP-4125-PYSE 11/8 x 3 1920 .580(74.7) 14% 141/4 CP-41 25-PAMA 1 1 /sx 3 1860 .680(77.3) 141/4 14</4
(28.6 x 76) Hex. Type A-7 (378) (6.5) (28.6) x 76) Round Type A-6 (362) (6.5)
CP-4125-PYTA 1 Vs x 4 1500 .680 (77.3) 1
16 /8 15V2 CP-41 25-PAME 1 1/a x 3 1860 .580(74.7) 141/4 141/4
(28.6 x 702) Round Type A-6 (470) (7.0) (28.6 x 76) Hex. Type A-7 (362) (6.5)
CP-4125-PYTE 11/8 x 4 1500 .580(74.7) 161/8 151/2 CP-41 25-PANA 1Ve X 4 1620 .680(77.3) 15Vfe 151/4
(28.6 x 702) Hex. Type A-7 (470) (7.0) (28.6 x 702) Round Type A-6 (394) (6.9)
CP-41 25-PANE 11/8 x 4 1620 .580(74.7) 151/2 151/4
(28.6 x 702) Hex. Type A-7 (394) (6,9)

prices of other sizes upon request

47 D & L THOMAS EQUIPMENT CORP.
 Heavy-duty, Vibration Reduced
CHIPPING HAMMERS

CP-4100-3R
CP-4121-3R

CP 4100 SERIES
Powerful, lightweight Chipping Hammers/Needle Sealer
Features AH Models
D Lightweight — makes tools easy to handle and maneuver; D Inside trigger — provides protection from external dam-
permits one-handed operation in overhead applications. age. Permits a solid comfortable grip and helps prevent
U Powerful — transmits maximum amount of impact energy accidental start-up.
to the chisel. D Moveable deflector — reduces sound level. Allows ex-
D Screw-on retainer — provides a positive lock of chisel to haust air to be directed away from operator. 3" stroke model
tool. Includes resilient bumper to absorb shock, has an additional integral muffler which further reduces sound.
D Chisel release spring — lifts chisel out of piston striking D Steel cylinder and aluminum handle —reduce mainte-
area with retainer removed. nance and extend tool life.
D Simplate valve — gives smooth powerful operation, which D Low air consumption — saves energy. Requires less
results in low maintenance; is easy to service. compressor capacity
D Ergonomic closed grip "D" handle — locates operator's D Choice of 2" and 3" stroke lengths— allows operator to
hand in-line with chisel for maximum effectiveness and opera-
tor comfort.
match tool to job requirements.
D Choice of round and hex bushings — round: chisel
CP4121 SERIES
Q New teasing throttle design —provides precise control of rotates freely; hex: stops chisel rotation. with vibration isolation system and unique air "lockout"mechanism
chisel.
Features AN Models
Specifications
All models: Closed grip handle with inside trigger, %" (NPTF) air nlet thread, air consump i on at 90 PSI: 13cfm-16cfm. high and low frequency vibration transmitted to the operator, operation, which results in Iaw maintenanc e; is easy to
Bore and Chisel Overall Net
without compromising tool performance; is effective over a
Stroke Blows Length Weigh, wide range of operator applied orce. Has minimal effect on D Moveable deflector — all DWS exhaust air o be directed
Catalog

CP-41 00-2R
Type of

Closed Grip
(mm)
% x 2 '/2
per

3000
"37
.680
in.
(mm)

13"
(kg)
5 1 /4
ool length and weight.
H Unique air "lockout" mechanism, patented by CP —
automatically stops air flow to the tool if retainer is loosened
away from operator.
D Hardened steel piston an J cylinder, alunlinum handle
xtend tool life.
Inside Trigger (19x64) (17.3) (330) (2.4) or removed; helps prevent chisel from being accidentally D Choice of 1", 2", 3" and4" stroke leng hs— allows
Round Type A-6 ejected. Tool remains disarmed until retainer is correctly operator to match tool to job equirements.
CP-41 00-2H Closed Grip % x 2 1/2 3000 .580 13" 5 'A
eplaced. D Choice of round and he round: chisel
Inside Trigger (19x64) (14.7) (330) (2.4) H Screw-on retainer — provides a positive lock of chisel to rotates freely; hex: stops chis el rotation.
Hex Type A-7 ool; has resilient bumper to absorb shock of chisel when
CP-41 00-3R Closed Grip % x 3 </2 2500 .680 15" 6 1 /8
driven forward. Retainer acts as integral part of the "lockout"
Inside Trigger (19x89) (17.3) (381) (2.8) mechanism.
H Inside trigger — provides protection from external dam-
Applications
Round Type A-6
CP-41 00-3H Closed Grip % x 3 !/2 2500 .580 15"
age. Permits a solid comfortable grip. The CP 41 21 Series Chipping Hammers are powerful tools
Inside Trigger (19x89) (14.7) (381) (2.8) II Ergonomic closed grip "D" handle— locates operator's with significantly reduced vib ration levels, They are de-
Hex Type A-7 hand in-line with chisel for maximum effectiveness and signed for light to medium de nolition of cone rete, stone or
operator comfort. masonry structures, and mets I removal in br dge work and
Closed grip handle with inside trigger, %" (NPTF) air nlet thread, a r c o nsumption at 90 PSI 12 cfm. J New teasing throttle design — provides "ring valve" steel erection. These tools a e also well sui ed for a wide
control. variety of chipping and cutti ng applications in foundries,
Bore and Net HI Forward entry air-inlet — improves tool balance and petrochemical plants and ship yards.
Stroke Blows Dia. No. Length Weight educes pulsating air effect felt by the operator. Bu It-in air
Catalog Type of in. per Needles in.
Number Handle (mm) Minute (mm) per tool (mm) (kg) nlet screen keeps out foreign objects.
CP-41 00-NS Closed Grip 4200 % 16 16" 5!/2
Inside Trigger
% X 1 1/4

(19x32) (2.5) Specifications

All Models: Closed grip handle with self-closing inside trigger; V21' NPTF) air inlet thread; air con sumption at 90 psi, 23-27 cfm
Bore and
Stroke Blows Bushing Length' Weight*
Catalog in.
Number (mm) Mfrfute (mm) (mm) (kg)
CP-41 21 -1R 1 Vs x 1 2820 .680(17.3) 16% 16 1/2
(28.6x25.4) Round Type A-6/A-3 (429) (7.5)
CP412C) SERIES CP-41 21 -1H 2820 .580 (14.7) 16% 161/2

with uniqu 3 air "lockc>ut" mechanism (28.6x25.4) Hex. Type A-7/A-4 (429) (7.5)
CP-41 21 -2R 1 Va x 2 2400 .680(17.3) 17% 17V 2
Feature*> All Models (28.6x51) Round Type A-6/A-3 (448) (8.0)

D Unique air "lo ckout" mechani sm, patented by CP — D Redesigne d simplat s valve — gives smooth powerfu CP-41 21 -2H 1 Va x 2 2400 .580 (14.7) 17% 171/2

automatically stop s air flow to the toe I f retainer is loosened or operation, whi :h results in low maintenance is easy to service, (28.6x51) Hex. Type A-7/A-4 (448) (8.0)
removed; helps pr vent chisel from being accidentally ejected. LJ Moveable deflector air to be directed
CP-41 21 -3R 1 Vs x 3 1920 .680 (17.3) 19% 19
Tool remains disa med until retaine s correctly replaced. away from op srator.
(28.6x76) Round Type A-6/A-3 (498) (8.6)
D Screw-on reta ner — provides a positive lock of chisel to CH Steel pisto n, cylinder and handle — re duce maintenance
tool; has resilien bumper to abso b shock of chisel when and ex end to ol life. CP-41 21 -3H 1 Ve x 3 1920 .580 (14.7) 19% 19
driven forward. R >tainer acts as inte gral part of the "lockout " CH Choice of 1", 2", 3" and 4" stroke Iengths — allows (28.6 x 76) Hex. Type A-7/A-4 (498) (8.6)
mechanism. opera or to m itch tool to ob requirements
D Two-bolt flan ged connection between cyl nder and LJ Choice of round and hex bushings — round: chisel CP-41 21 -4R 1 VB X 4 1500 .680 (17.3) 20% 20
handle — for fas easy service. P s tive handle- o-cylinder rotates freely; hex: stops ch sel rotation. (28.6x102) Round Type A-6/A-3 (530) (9.1)
joint reduces parts breakage.
CP-41 21 -4H 1 Vs x 4 1500 .580(74.7; 20% 20
U Ergonomic clc sed grip "D" har die— locates operator's
hand in-line withe effectiveness and opera-
AnnllC
*»HH"*-
ationS (28.6x102) Hex. Type A-7/A-4 (530) (9.1)
or comfort. The CP 4120 Series Ch aping Hammers are powerful tools
D Inside trigger — provides prote ;tion from externa dam- designed for I ghttomed um demolition of concrete, stone or
age. Permits a so id comfortable gr tures, and metal removal n bridge work and
U New teasing throttle design — provides "r ng valve" steel erection These to ols are also wel suited for use in
control. foundries, pe rochemica plants and ship yards for a wide
D Forward entry ves tool balance and re- varie y of chip ping and c tt ng applications
duces pulsating ai effect felt by the operator. Built-in a r inlet
screen keeps out oreign objects.

Specifications
All Models: Closed grip handle with self-closing inside trigger; 1/2" (NPTF) air inlet thread; air consumption at 90 psi, 23-27 cfm.
Overall
Stroke Blows Bushing Length' Weight*
Catalog in. in.
(mm) MCfute (mm) (mm) (kg)
CP-41 20-1 R 1 Va X 1 2820 .680(17.3) 14 1
/4 15
(28.6x25.4) Round Type A-6/A-3 (362) (6.8) CP-4120-3R
CP-41 20-1 H 1 Va X 1 2820 .580 (14.7) 14V4 15
(28.6x25.4) Hex. Type A-7/A-4 (362) (6.8)

CP-41 20-2R 1 Va x 2 2400 .680 (17.3) 15 16

(28.6x51) Round Type A-6/A-3 (381) (7.3)

CP-41 20-2H 1 Ve x 2 2400 .580 (14.7) 15 16

(28.6x51) Hex. Type A-7/A-4 (381) (7.3)
CP-41 20-3R 1 Va x 3 1920 .680 (1 7.3) 17 171/2

(28.6x76) Round Type A-6/A-3 (432) (8.0)

CP-41 20-3H 1 Vs x 3 1920 .580 (14.7) 17 17'/2

(28.6x76) Hex. Type A-7/A-4 (432) (8.0)

CP-41 20-4R 1 Vs x 4 1500 .680 (17.3) 18% 18 %
(28. 6 x 102) Round Type A-6/A-3 (464) (8.4)

CP-41 20-4H 1 Vs x 4 1500 .580 (14.7) 18% 18V 2

(28.6x102) Hex. Type A-7/A-4 (464) (8.4)

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 48
 Pumps
Sludge
Chicago
Pneumatic

CP-0071E/CP-0077
Applications: The CP-0071E and
CP-0077 sludge pumps easily handle
water containing 15% solids and
particles up to 1" in size. They are
suitable for pumping sea water and CP-0071 E
certain corrosive chemicals.
Features
• operates on venturi/ejector
principle—no motor or diaphragm
to wear out
• exhaust muffler—reduces sound
level

Caution
CP-0071 E and CP-0077 pumps Air consumption at 90 psi: CP-0071 E 91 cfm; CP-0077 85 cfm.
are not intended for pumping Max.
Suction Lift*
Max.
Head Discharge
Net
Weight
Air Inlet
Thread
Recom.
Hose Size Pump
flammable fluids. Catalog
Number
ft.
(m)
ft.
(m)
Outlet
(NPT)
Ib.
(kg)
Size
(NPT)
in.
(mm) Discharge
CP-0071 E 20" 200** 21/2" 97 3/4» 1 Table A
(6.10) (61) (44) (25.4)
CP-0077 20** 175** 21/2" 152 3/4" 1 Table B
(6.10) (53) (69) (25.4)
"Includes friction head from hose.

Pumps
Sump
CP-0010, CP-0020
Applications: CP-0010 and CP-0020
sump pumps are designed with the
performance and durability which
make them ideal for removing water
from trenches, ditches, manholes,
industrial sumps and excavations.
Will pump down to within 7/8" from
base. CP-0020
CP-0010
Features - All Models
• single-stage centrifugal units driven
by powerful vane motors
• double seals protect bearings and
motor from water and mud
• integral oiler provides continuous
lubrication
• integral strainer, air inlet valve
• bronze impeller
• cast-iron housing
Caution
CP-0010 and CP-0020 pumps
are not to be used for pumping
flammable fluids.

Motor Horsepower: CP-0010, 3 hp; CP-0020, 4 hp.

Min. Height
Water Overall w/o Net Min. Opening Air Inlet Recom. Pump
Depth Height Valve Water Weight Pump Will Enter Thread Hose Size Performance
Catalog in. in. in. Discharge Ib. in. Size in. Discharge
Number (mm) (mm) (mm) (NPT) (kg) (mm) (NPT) (mm) (GPM)
SUMP
CP-0010 7
/8 171/2 131/4 2" 33 81/4 x 9 3/4« 3
/4 Table A
(22.2) (444.5) (336.6) (15) (210 x 229) (19.1)
CP-0020 7
/8 16 113/4 21/2" 58 9 X 113/4 1" 1 Table B
(22.2) (406.4) (298.7) (26.3) (229 X 298.5) (25.4)

prices of other sizes upon request

49 D & L THOMAS EQUIPMENT CORP.
 Applications: CP backfill tampers are
Tampers
designed to effectively compact soil around Backfill
Chicago foundations and other structures and for
compacting backfill in trenches.
Pneumatic The CP-0003 is designed to handle light-
to-medium applications; the CP-0004RV is
the ideal tool for heavier jobs.
Features
CP-0003 and CP-0004RV
• maximum power—slow, powerful blows
efficiently and quickly compact all types
of backfill, including clay and soils
containing high percentages of finely
crushed or powdered material
• heat-treated cylinder and chrome plated
piston—significantly extend tool life
• adjustable packing—maintains a
positive air seal CP-0003 CP-0004RV
• butt held with clamp screw—for quick,
easy replacement
• exhaust deflector—directs air, moisture
and oil away from operator
• integral oiler—continuously lubricates
tool during operation
• well balanced, smooth operating tool—
easily guided by one person
All Models: 1/2" (NPTF) air inlet thread; air consumption: CP-0003 18 cfm at 90 psi, CP-0004RV
28 cfm at 90 psi, aluminum butt.
Bore Net Overall Piston Rod
and Stroke Blows Weight Length Body Dia. Butt Size
Catalog Valve in. ib. in. in. in.
Number Type (mm) minute (kg) (mm) (mm) (mm;
CP-0003 Simplate 17/16 x 6 800 30 52 7
/8 5
Valve (36.5 x 752.4; (73.6; (7320; (22.2; (7270;
CP-0004RV Ring 21/4 x 6 780 42 50 1 61/4
Valve (572 x 752.4; (19.0) (1270) (25.4; (758.8;

Impact Wrenches
Standard—3/8" to 1/2" (10 mm to 13 mm) Bolt Capactiy
The following selection of Chicago CP-6440
Pneumatic impact wrenches is well suited • CP pioneered "rocking dog" clutch—for
to construction equipment maintenance superfast run down, achieving torque level
work. These tools are all designed to quickly—ideally suited for soft- or hard-pull-
withstand tough use, have heat treated up conditions
internal parts, and feature CP-proven • 3-piece construction provides easy access
clutches. A wide variety of accessories is to all moving parts
available from CP to further extend the • oil bath clutch chamber for constant
versatility of these tools. lubrication and added durability
CP impact wrenches in this section are CP-9540
classified by bolt capacity.
• CP designed pin clutch for fast run down
Features and high torque build-up—ideal for hard ;
CP-9525 pull-up applications :

• powerful and efficient two-jaw clutch for • oil bath clutch chamber for constant
controllable power with minimal air lubrication
consumption • integral speed regulator to match tool
• teasing throttle for easiest fastener output to job requirements
starting CP-9541
• integral speed regulator to match torque
to job requirements • CP designed pin clutch for fast run down
• heat-treated internal parts for durability and high torque build-up—ideal for hard-
pull-up applications
• 3-piece construction provides easy access CP-9540-RSR
to all moving parts-facilitates maintenance
• steel clutch housing stands up to rough use

All Models: W (NPTF) air inlet thread air consumption at 90 psi: CP-9525 12 cfm; CP-6440 16 cfm; CP-9540 13 cfm;
CP-9541 13 cfm; CP-9547 18 cfm.
Capacity Side to Overall Net
Bolt Dia. Shank Center Length* Weight
Catalog Number
CP-9525-RSR
in.
(mm)
3/8 (10)
KK£
Side
Size
in. (mm)
% (10) Square
Retainer
Type
Friction Ring 15
in.
(mm)
/ie (24)
in.
(mm)
5Ve (1 30)
Ib.
fig)
2*/B(1.1)

CP-6440-RS Vz(13) Side V2(1 3) Square Pin 1 %(44; 67/s(175) 6(2.7)

1
CP-6440-RSR Vz(13) Side /2 (13) Square Friction Ring 1 % (44; 67/s(775; 6(2-7;
CP-9540-RSR Vz(13) Side Vz(1 3) Square Friction Ring 11/4(32; 63/»(772; 5(2.3;
1
CP-9541 -RS V2(13) Side /2 (13) Square Pin 15/ie(33; 65/a(768; 5V2(2.5;
1
CP-9541 -RSR VZ(13) Side /2(7 3) Square Friction Ring 15/ie(33; 6%(768; 5Va (2.5)
1
CP-9547-RS Vz(13) Side /2 (13) Square Pin IV* (28) 6V* (159) 4V? (2.0)
"To rear of socket

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 50
 Abrasive Tools
Die Grinder/Angle Grinders
Chicago
Pneumatic
Die Grinder
CP-9108
• fast metal removal with minimum
operator effort
• aluminum alloy construction—
excellent durability CP-9108-R
CP-9113
powerful 1 hp, 25,000 rpm motor
• steel housing—withstands rugged
use
• hardened steel motor parts—
excellent wear resistance
• lock-off lever throttle—helps prevent CP-9113-G
accidental start-up
• teasing throttle—precise control
• speed regulator—allows operator to
reduce the speed to match job
requirements
• interchangeable motors—with CP-
3040 grinders
CP-9113-GES
extended spindle version of CP-9113-G
offers two-hand operation for heavy-
duty work; reaches recessed areas CP-9113-GES

All Models: Self-closing lock-off lever throttle, YV (NPTF) air inlet thread size; air consumption at 90 psi: CP-9108 22 cfm; CP-9113 32 cfm.
Spindle thread and projection: CP-9108 M10 x 1.25; CP-9113G 3/e"-24 x 9/is".
Wheel Capacity in. (mm) Overall Length Outside Net Weight
Type Spindle Free Speed Less Guard Diameter Less Guard Motor
Catalog Number Housing Dia. Width rpm in. (mm) in. (mm) Ib. (kg) H.P.
1
CP-9108-R Short /4" collet 24000 53/4 (146) 5
1 /8 (41) r/*(o.6) .5
CP-9113-G Short W
1
collet — 25000 61A (159) 15/8 (41) 2 (0.9) 1.0
CP-9113-GES Extended /4" collet 25000 W/a(283) 5
1 /8 (41) 3 (1.4) 1.0
Standard Equipment:
CP-9108-R, CP-9113-G: Chuck wrenches (2), C-116858 (9/i6") and C-119327 (3/4"); VV (6.4 mm) collet KF-124524
CP-9113-GES: Integral Erickson chuck and VV (6.4 mm; collet, C-119729
Optional Equipment: (6.Omm) collect, KF-130372

Scabbier
Applications: The CP-0006 Scabbier is
the ideal tool for cleaning and roughening
concrete and construction joints. The tool
can also be used to produce ornamental
or contrasting finishes on road and
building structures.
Features CP-0006
• lightweight, compact tool with con-
toured grip handle—reduces operator
fatigue; increases output All Models: Va" (NPTF) air inlet thread; air consumption 29 cfm at 90 psig.
• tungsten carbide-tipped pistons—last
longer; are easily replaced Height
(Pistons
• backhead grip—gives in-line thrust Weight Length Stroke Blows Bore Ext'd.) Width
• chamfered cylinder block—increases Catalog Ib. in. in. per in. in. in. No. & Type
visibility of the workpiece permitting Number (kg) (mm) (mm) Minute (mm) (mm) (mm) of Pistons
close-up operation in corners CP-0006 10 16.57 1 3000 1.103 7.76 4.37 Three
(4.54) (411) (25) per (28) (197) (111) 4-point
piston carbide
tipped

prices of other sizes upon request

51 D & L THOMAS EQUIPMENT CORP.
Chicago
Pneumatic

CONCRETE VIBRATORS

CP-1150, CP-2190 & CP-3250

1-1/2", 2-1/2" and 3" CONCRETE VIBRATORS
Chicago Pneumatic is proud to introduce a new line
of Concrete Vibrators. The CP-1150, CP-2190 and
CP-3250 are heavy duty tools designed for pours
of low slump concrete in columns, footings, slabs
and walls. Each tool has a greater radius of
influence which translates to more work accom-
plished in a shorter period of time. And, unlike
electric concrete vibrators, there is no chance of
shock or need for extension cords and plugs.

Standard Features:
• Three head diameters to choose from:
1-1/2", 2-1/2" and 3"
• Variable speed throttle
• In-line lubricator
• Auxiliary air hose
CP-2190
• Locked motor end plates

Specifications:
All models: 1/2" NPTF a
Capacity Head Dimensions
Radius of Length w/o
Catalog aggregate Vibration per Length Net Weight Aux. hose C.F. M.
in. (mm) in'Tmm) Ib. (kg) Average
CP-1150 9-10 25 10,000 1-1/2 18 16 86 28
(228.6-254.0) (38. 1) (457.2) (7.3) (2184.4)
CP-2190 15-16 55 12,000 2-1/2 13-3/4 27 118 65
(381.0 - 406.4) (36.5) (349.3) (12.3) (2997.2)

CP-3250 16- 17 70 9,000 3 16-5/8 35 117 85

(406.4 - 431.8) (76.2) (422.4; (15.9) (2971.8)

CP-0044 AIR POWERED CUT-OFF SAW

Chicago Pneumatic is proud to introduce a new Air

Powered Cut-Off Saw. The CP-0044 is a powerful
tool driven by a direct drive, 4 hp motor and is
designed to cut a variety of surfaces including
concrete, asphalt and stone. This direct drive saw
has no belts to continually check for tension. The
CP-0044 is also engineered for precise balance so
less effort is needed to do the job at hand. A built-
in oiler provides for continuous lubrication so more
time is spent on the job and less time servicing.
The CP-0044 is also designed with safety in mind
using a standard lock-off trigger to help prevent
accidental starting. Also the blade guard can be
operated with one hand for convenience.

Standard Features:
• Chicago Pneumatic 4 hp motor
• One-hand operation blade guard
• Integral oiler
• Lock-off trigger
• Direct drive operation
• Two position handle

Specifications:
1/2" NPTF air inlet, 85 cfm

Blade Arbor Dia. Weight with Blade Overall Leigth Max. Cutting Depth Blade Cap
Catalog No Load Ib.
Number rpm (Kg) (mm) (mm)
1 28 26-1/2 4 14
CP-0044 (25.4) 4800 (12.7) (673. 1) (101.6) C355.fi)

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 52
 CHIPPING HAMMERS BACKFILL TAMPER

MODEL CH-4 CH-3 CH-2 CH-1 MODEL CBT-6

WEIGHT (Ibs) 16 14 13 12 WEIGHT (Ibs) 39
LENGTH (in) 16-3/4 14-3/4 13-3/4 12-1/4 LENGTH (in) 48-1/4
CYLINDER BORE (in) 1-1/8 1-1/8 1-1/8 1-1/8 CYLINDER BORE (in) 1-1/2
PISTON STROKE (in) 2-1/2 PISTON STROKE (in) 5-1/2

SHANK SIZE (in) Hex or Round Hex or Round Hex or Round Hex or Round BUTT SIZE 6"

DEMOLITION TOOLS CLAY DIGGERS

MODEL CRB-9 MODEL CA7 MODEL CCD-30

WEIGHT (Ibs) 27 WEIGHT (Ibs) 17 WEIGHT (Ibs) 30
LENGTH (in) 23-1/2 LENGTH (in) 18-1/8 LENGTH (in) 23
CYLINDER BORE (in) 1-1/16 CYLINDER BORE (in) 1-3/8 CYLINDER BORE (in) 1-3/4
PISTON STROKE (in) PISTON STROKE (in) 4-3/4 PISTON STROKE (in) 3-3/8

SHANK SIZE (in) SHANK SIZE (in) 1 Hex x 4-1/4

SHANK SIZE (in) 1-1/32Rx 3-5/32 7/8 Hex x 3-1/4

prices of other sizes upon request

53 D & L THOMAS EQUIPMENT CORP.
 Continental Power Tools, Inc.
PAVING BREAKERS

MODEL CPB-90 MODEL CPB-60 MODEL CPB-40

WEIGHT (Ibs) 92 WEIGHT (Ibs) 65 WEIGHT (Ibs) 40
LENGTH (in) 28-1/2 LENGTH (in) 25-3/4 LENGTH (in) 26
CYLINDER BORE (in) 2-5/8 CYLINDER BORE (in) 2-1/4 CYLINDER BORE (in) 1-3/4
PISTON STROKE (in) 6-1/8 PISTON STROKE (in) 4-1/8 PISTON STROKE (in) 5-3/4

SHANK SIZE (in) 1-1/8 Hex x 6 SHANK SIZE (in) 1-1/8 Hex x 6 SHANK SIZE (In) 1 Hex x 4-1/4
1-1/4 Hex x 6 1-1/4 Hex x 6

PAVING BREAKERS ROCK DRILLS

MODEL CPB-30 MODEL CRD-55 MODEL CRD-30

WEIGHT (Ibs) 33 WEIGHT (Ibs) 53 WEIGHT (Ibs) 29
LENGTH (in) 22 LENGTH (in) 23-13/16 LENGTH (in) 19-1/2
CYLINDER BORE (in) 1-3/4 CYLINDER BORE (in) 2-5/8 CYLINDER BORE (in) 2-7/16
PISTON STROKE (in) 3-3/8 PISTON STROKE (in) 2-11/16 PISTON STROKE (in) 1-7/16
SHANK SIZE (in) 1 Hex x 4-1/4 SHANK SIZE (in) 1 Hex x 4-1/4,7/8 Hex x 4-1/4, SHANK SIZE (in) 7/8 Hex x 3-1/4
7/8 Hex x 3-1/4 7/8 Hex x 3-1/4 7/8 Hex x 4-1/4

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 54
Atlas-Copco Drills
The RH range of reliable and economical rock drills
RH rock drills have proved to be among the most reliable and eco- As standard, the RH drills have a rotation chuck for a drill steel with
nomical rock drills available for hand-held bench drilling, for quarry- a 22 x 108 mm (7/8" x 4-1/4") shank. Alternatively they can be
ing and trenching, drilling for secondary blasting and for smooth blast- equipped with a rotation chuck for a 19 x 108 mm (3/4" x 4-1/4") shank.
ing. The drills are characterized by low spare parts consumption All models have a connection for an air hose with a 20 mm (3/4")
and low maintenance costs. They have a high rate of penetration in internal diameter.
relation to their low weight and low compressed air requirements. RH 571-5L — a rugged, medium-weight model intended for drill-
The low weight also makes them easy to handle. ing 27—40 mm (7/8"—1-5/8") holes to a depth of about 4 m (13').
RH drills are available as silenced versions (designation S). The RH 658-5L — a powerful, all-round drill intended for drilling 27—
silencer mainly suppresses the low frequency noise.
40 mm (7/8"—1-5/8") holes to a depth of about 6 m (20').

Technical Data

^Illllil;

Type RH571-5L
1
RH571-5LS RH 658-5L
1
RH 658-5LS
Order no. 8311 0301-29 8311 0301-37 8311 0302-77 8311 0302-85
Air requirement at 6 bar (87 psig) l/s (cfm) 37 (78.5) 37 (78.5) 56(119) 56(119)
Rate of penetration1) mm/min (in/min) 295(11.5) 275(11) 425 (16.5) 410 (16.1)
Impact rate blows/s 37 37 34 34
Length mm (in) 510 (20) 510 (20) 565 (22) 565 (22)
Weight kg (Ib) 17.8 (40) 18.9(42) 24.0 (53) 25.0 (55)
1)
With 33 mm (1-19/64") chisel bit in granite at a working pressure of 6 bar (87 psi)

The BED range of lightweight, powerful, quality tools

BBD 12—in 9 different versions Ergonomic and efficient
The low weight makes the drills easy to handle and ideal for use in Effective Silencing: The silencer consists of a two-piece hood in
construction work, quarrying and scaling work, plug hole and seam methane rubber, a material highly resistant to impact and wear and
drilling, for secondary blasting similar work where the rock drill must also unaffected by oil, antifreeze agents or extreme variations in tem-
be easily and quickly moved and put \o use. perature.
The BBD 12 range is primarily designed for drilling 17—35 mm
(34—1-1/4") holes to a maximum depth of 3 m (10'). It includes Vibration absorbing T-handles: TO establish a correct working
versions with D-handles with screw-cap drill retainers (12DC); latch position, the handles point slightly upward and to the rear. They are
tool retainers with D- or T-handles (12 D, 12T); water-flushed (12 economically shaped and are made of urethane rubber, which re-
TW) and silenced versions (S) also. duces vibration and is comfortable to hold in hot and cold climates.

Technical data.
Designations: C - Cap (screw cap) D - D-handle T - T-handle S - Silenced W - Water-flushed

5f
Rock drill1)
Type BBD 12 DC2' BBD 12 DCS2' BBD 12 D BBD 12 DS BBD12T BBD 12T-01
f
BBD12TS BBD12TW 4 ) BBD12TW-01 4 '

Order No. 8311 0101-47 8311 0101-54 8311 0102-46 8311 0102-79 8311 0102-87 8311 0102-95 8311 0102-61 8311 0103-03 8311 0103-11
Std. chuck 19 x 108 19 x 108 19 x 108 19 x 108 19 x 108 22 x 108 19 x 108 19 x 108 22 x 108
mm (in.) (3/4x4-1/4") (3/4x4-1/4") (3/4x4-1/4") (3/4x4-1/4") (3/4x4-1/4") (7/8x4-1/4") (3/4x4-1/4") (3/4x4-1/4") (7/8x4-1/4")
Air Req.3'
l/s(cfm) 24(51) 22 (47) 24(51) 22 (47) 24(51) 24(51) 22 (47) 20 (43) 20 (43)
Length
mm (in.) 560 (22) 560 (22) 565 (22.2) 565 (22.2) 505 (20) 505 (20) 505 (20) 505 (20) 505 (20)
Net weight
kg (Ibs) 9.6(21.2) 10.5(23.1) 9.8(21.6) 10.7(23.6) 11.1 (24.4) 11.1 (24.4) 12.1 (26.7) 11.2(24.7) 11.2(24.7)
1) 2 3) 4)
AII models have connection for >DC models designed for max 29 At working pressure of 6 bar (87 psi) Water requirement at 6 bar (87 psi) 4. 5-
hose with 16 mm (5/8") inner diam- mm (1-9/64") hole dia and with the RPM — 200, Piston 0 — 45 mm mm, 10 gal/min Water hose dimension
eter screw cap fitted (1-3/4") Stroke 40 mm (1 5/8") 12.5 mm (1/2")

prices of other sizes upon request

55 D & L THOMAS EQUIPMENT CORP.
Chipping hammers
Pneumatic breakers Mtiasdopco

TEX3, TEX5 TEX 3 and TEX 5 are lightweight chip-

ping hammers for a variety of small-
sized jobs such as:
—chipping masonry and plaster
—concrete chipping
—roughing
—cleaning
—hole-making
—chasing
These hammers have a high capac-
ity/weight ratio. The safety trigger has
a double grip and two positions: gentle
start and full speed.
The tool holder is of screw cap type,
with the same buffer for both narrow
Technical data and wide tools.
Type Weight Air Length Impact Shank Both TEX 3 and TEX 5 meet the Eu-
requirements rate size ropean Community norms for noise
kg Ibs l/s cfm mm in Hz blows/min mm in dampening.
TEX 3 3.7 8.1 6.9 15 310 12-1/4 68 4080 19x50 3/4x2
TEX 5 5.0 11 10.1 17 375 14-3/4 46 2760 19x50 3/4x2
TEX5R 5.0
Data at 6 bar (87 psi) air pressure.
11 10.1 17 375 14-3/4 46 2760 19x95 3/4 x 3-3/4
TEX5R

TEX 8, TEX 11D

TEX 8 and TEX 11D are efficient The choice of TEX 8 or TEX 11D will
medium-weight pick hammers. depend on the weight and corre-
They are ideal for construction sponding quantity of work required.
work such as: Their excellent balance and light
weight make these hammers espe-
— horizontal and upright jobs cially suitable for horizontal work,
— making holes and channels in since they are the lightest and most
concrete walls, etc. productive in their class.
— light demolition work The light, flexible design, combined
— digging with an effective silencer and air-
cushioned piston, reduces strain on
— chopping—tree roots, for the operator.
example Both hammers are available in a
variety of models, as indicated by
the different designations:

Technical data
Type Weight Air Length Impact Shank
requirements rate size
kg Ibs l/s cfm mm in Hz Blows/min mm in

TEX 8R1) 8.2 18 17.0 36 530 20-3/4 28 1680 25 x 75 I x3

TEX 8R2)
TEX 8RS1) 9.2 20
TEX 8RS2)
TEX8DK 1 ) 9.7 21.4 17.0 36 530 21-1/8 28 1680 22 x 82.5 7/8 x 3-1/4
TEX 8DK2)
TEX SDKS1) 10.9 24
TEX SDKS2)
Standard equipment
TEX8H 1 ) 8.6 19 17.0 36 540 21-1/4 28 168022 x 82.5 7/8 x 3-1/4 Screw cap or kick-latch retainer
TEX 8H2) for the tool.
TEX8HS 1 ) 9.5 21
TEX 8HS2) All hammers are supplied com-
TEX 11 DC2) 10.1 22 19.0 40 600 23-1/2 27.2 1630 22 x 82.5 7/8 x 3-1/4 plete with fitted claw coupling.
TEX 11 OCR2) 10.1 22 25 x 75 I x3
TEX 11 DCS2) 11.2 25 22 x 82.5 7/8 x 3-1/4
TEX11DCSR 2 ) 11.2 25 25 x 75 I x3
TEX11DK 2 ) 11.2 25 590 23 22 x 82.5 7/8 x 3-1/4
TEX 11DKS2) 12.4 27
1 2
Data at 6 bar (87 psi) air pressure ) External trigger ) Internal trigger

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 56
 JtOasCopco PAVING BREAKERS

TEX17E,23E,
33E and 43E
The TEX-E (E for ergonomics) range
will handle the really tough jobs in
the construction industry. To make
it easier for the operators and en-
sure even better results, these pneu-
matic breakers have entirely new
features compared to standard
Technical data
equipment—especially with regard
to ergonomic design. Type Weight Air Length Impact Shank
requirements rate size
Although great attention has been kg Ibs l/s cfm mm in Hz Blows/min mm in
paid to ergonomics, impact energy TEX17E 21.5 47.4 17.9 37.9 555 22 27.2 1630 22 x 82.5 7/8x3-1/4
is very high in relation to weight. 22 48.5 22 x 1 08 7/8x4-1/4
22 48.5 25 x 1 08 1 x 4-1/4
TEX-E breakers are easier on the
TEX 23E 27.4 60.3 24.8 52.0 655 26 22.5 1350 25 x 1 08 1 x 4-1/4
operator and less tiring, and thus 27.4 60.3 710 28 28 x 1 60 1-1/8x6-1/4
much more productive than other 27.7 60.8 32 x 1 60 1-1/4x6-1/4
hand-held breakers on the market. TEX 33E 35 77.0 29.0 61.4 820 32 18.0 1080 28 x 1 60 1-1/8x6-1/4
35 77.0 32 x 1 60 1-1/4x6-1/4
Thanks to a simple, trouble-free de- TEX 43E 40 88.0 32.5 68.8 840 33 18.0 1080 28 x 1 60 1-1/8x6-1/4
sign, minimum maintenance and 40 88.0 32 x 1 60 1-1/4x6-1/4

fewer spare parts are needed. Data at 6 bar air pressure

TEX16 —TEX42
TEX 16 to TEX 22 are lightweight TEX 22—TEX 42 have a built-in,
pneumatic breakers especially de- automatic lubricator which pro-
signed for work directed down- vides perfect lubrication through-
wards in the construction industry. out a shift.
They are ideal for: Design modifications eliminate the
—light construction demolition risk of freezing and further increase
—asphalt breaking operating reliability.
—breaking up frozen ground TEX 16—TEX 42 are supplied with
—digging a kick-latch retainer for rapid,
—breaking non-consolidated rock simple tool change.
TEX 32 and 42 are in the medium
The great variety of tools available
class of pneumatic breakers. They gives these breakers a wide range
are suitable for basically the same of applications for the most eco-
applications as above, but have a nomical use.
heavier weight, higher output and
greater capacity. For TEX 42 and
TEX 43E a conversion kit, TEP, for
pile driving is available.

Technical data
Type Weight Air Length Impact Shank
requirements rate size
kg Ibs l/s cfm mm in Hz Blows/min mm in
TEX 16 14.8 32.6 17.9 38 570 22-1/2 25.0 1500 22 X82.5 7/8x3-1/4
15.0 33.0 22 x 1 0 8 7/8x4-1/4
15.3 33.7 25 x 1 0 8 1 x 4-1/4
Standard equipment TEX 16S 16.0 35.3 17.9 38 570 22-1/2 25.0 1500 22 X82.5 7/8x3-1/4
16.2 22 x 1 0 8
Kick=latch retainer for the tool. 16.5
35.6
36.3 25 x108
7/8x4-1/4
1 x 4-1/4
TEX 22 (S), TEX 32 (S) and TEX TEX 22 22.0 48.4 24.8 52 650 25-1/2 22.5 1350 25 x108 1 x 4-1/4
22.6 49.7 28 x160 1-1/8x6-1/4
42 (S) have a built-in lubricator. 22.9 50.2 32 x 160 1-1/4x6-1/4
All breakers are supplied com- TEX 22S 23.9
24.5
52.5
54.0
24.8 52 650 25-1/2 22.5 1350 25
28
x108
x 160
1 x 4-1/4
1-1/8x6-1/4
plete with fitted claw coupling. 24.8 54.5 32 x160 1-1/4x6-1/4
TEX 32 28.7 63.0 29.0 61 725 28-1/2 18.0 1080 28 x 160 1-1/8x6-1/4
29.0 63.8 32 x160 1-1/4x6-1/4
TEX 32S 30.7 67.5 29.0 61 725 28-1/2 18.0 1080 28 x160 1-1/8x6-1/4
31.0 68.0 32 x160 1-1/4x6-1/4
TEX 42 33.6 74.0 32.5 69 740 29 18.0 1080 28 x160 1-1/8x6-1/4
34.0 74.8 32 x160 1-1/4x6-1/4
TEX 42S 35.7 78.0 32.5 69 740 29 18.0 1080 28 x160 1-1/8x6-1/4
36.0 79.0 32 x 160 1-1/4x6-1/4

Data at 6 bar (87 psi) air pressure S=silencer

prices of other sizes upon request

57 D & L THOMAS EQUIPMENT CORP.
DKR 36 - a versatile and efficient machine
for demanding jobs in the building and contracting field
Technical data DKR 36 Kit
DKR 36 Kit (Ordering No.
84630103-61)
DKR 36 can also be supplied
in kit form.
The kit consists of a sturdy
Normal working pressure 6 bar.
steel carrying case, which
Type DKR 36 contains:
Ordering No. 84630103-60 DKR 36
Short-length hose 3 m
Shank Hexagon
Drill adapter
Air requirement at 6 bar (87 psi) l/s (cfm) 12(25.3)
Mandrel
Rate of penetration mm/min (in/min) 265(10.4)*
Narrow chisel
340(13.4)**
Lubricating oil
Impact rate blows/s 58.3
Grinding template
Length mm (in) 374(14.7)
Wear parts
Weight kg (Ib) 4 (8.8)

r
with 19 mm (3/4") chisel bit in granite ** with 19mm (3/4") chisel bit in concrete

D & L THOMAS EQUIPMENT CORP. 58

 Atlas Copco Cobra Combi

Cleaner emissions, lower

vibrations, less noise
The Cobra Combi - which is based on Atlas Copco's
popular Cobra 149 drill/breaker - is a modern tool that
meets emerging regulations, Equipped with a catalytic
converter and new carburettor; the Cobra Combi now
meets the tough US emission regulations EPA1. In addi
tion to this, a new silencer has cut the noise level from
114 dB to 110 dB, thereby fulfilling the European Noise
Emission Directive (NED),

Vibratfon-

New vibration-
dampening handles have
reduced vibration levels
from 8 to

Easy to start
With a new choke control, €asx to
new carburettor and user- The Cobra Com hi weighs just
friendly instructions, the 55 ibs, it comes with its own
Cobra Combi is easy carrying case which fits easily
to start into the trunk of your car.

Technical data CAPACITY

ISHIIII liiit!

59 D & L THOMAS EQUIPMENT CORP.

 Cobra Combi- Tools

The right tool for the job

We provide a Gomprehensive range of chisels so skin without the drawbacks of core btittleness.
that you can select the right tool for the job. The striking face is end milled. This ensures true con-
Atlas Copco chisels are probably the hardest tact between the piston and the tool, better transfer of
wearing tools on the market. They are made from energy, as well as less vibration and wear on both hammer
low carbon steel, which ensures a case-hardened and chiseL

Tools and accessories

ill! 9 Pigginci spade

11 Ground rod driver

5 Shaft for pad 16 Tamping pad, round

17 lamping pad, square

19 Post hole driver

D & L THOMAS EQUIPMENT CORP. 60

 'Berema" Gasoline
Ml

Powered Drill/Breakers

Part
Description Size Number

The "Berema" cobra breaker: top of COBRA-MKI Breaker Only TBMKI

the line, completely self-contained. PIONJAR120 Drill/Breaker TBP120
It's compact, portable and economi- PIONJAR130 Breaker Only TBP130
cal. Uses only 1 QT. of fuel per hour
without the use of compressors or
hoselines. Yet it packs all the power
of a medium-size pneumatic ham- Technical specifications.
mer or drill. Engine Pionjar
Displacement 11.3 in3.
Advanced aluminum cylinder, a dia- Strokes 2600-2800 rpm
phragm carburator that allows op- Carburetor Floatless (manual needle valve)
Ignition system Thyristor type breakerless
eration at any angle, automatic lu- Fuel tank volume 0.33 gal.
brication. Breakerless ignition for Fuel mixture 1:12 (8%) 2-cycle motor oil straight
quicker starting and recoil damp- Fuel consumption approx. 0.4 gal./hr.

ened handles that absorb up to 50% Technical specifications.

of the vibrations. Just the flick of a Engine Cobra-MKI
switch instantly converts the cobra Displacement 11.3 in3.
from drilling to breaking. Strokes 2500-2700 rpm
Carburetor Diaphragm type (Tillotson)
A wide range of tools and accesso- Ignition system Thyristor type breakerless
Fuel tank volume 1.1 QTS
ries are available, the perfect choice Fuel mixture 1:20 (5%) 2-cycle motor oil straight
for numerous small jobs and an ex- Fuel consumption approx. 1 QT./hr.
cellent addition to any fleet.
Versatility is the key word!

prices of other sizes upon request

61 D & L THOMAS EQUIPMENT CORP-
 All models shown are available in pneumatic or hydraulic versions.

WOODINGS DOWELING
TECHNOLOGIES, INC.
MV-50 DOWELMASTER*
Hydraulic Doweling Drill
• Single lever operation
• Fast penetration, with hole sizes up to 1 -3/4"
• Portable and lightweight for fast set-up and drill
time
• Low pressure hydraulics for long life with fewer
repairs
• HH-50 rock drill readily detaches for hand held
use. Air Patchee One front end can be substi-
tuted if required
SPECIFICATIONS:
Weight......................................................... 120lbs.
Length ................................... 47" (others available)
Drill travel............................................................18"
Oil required ................................................... 7 GPM
Pressure .......................................... 1500-2000 PSI
Flushing air................................................. 15 CFM

HH-50* Hydraulic Hand Held Rock Drill

• 50 Ib. class sinker drill
• Stepless power control as well as reverse rota-
tion to improve handling when collaring and drill-
ing
• 40% less vibration than comparable pneumatic
drills, while offering greater penetration rates
• Up to 10 dB lower noise level, with no oily ex-
haust air
• Simple, rugged low pressure design assures a
long service life
• Easily powered by any hydraulic equipment such
as a backhoe, loader, or utility truck
• Air or water flushing
SPECIFICATIONS:
Weight........................................................... 52 Ibs.
Oil Required.................................................. 7 GPM
Pressure .......................................... 1500-2000 PSI
Shank Size .......................................... 3/4" x 4-1/4"
7/8" x 4-1/4", 1 " x 4-1/4"

DOWEL PAK* Multiple Drill Doweling Rig

The original and still most popular hydraulic drilling
machine.
• Increase your production with multiple drills
• Uses your existing equipment (backhoe, grader,
loader) as the carrier and hydraulic power source,
giving you a self contained drilling unit
• Rig versatility: the basic frame accepts 2 to 6 drills,
with adjustable hole depth and spacing MODEL WD-55 Pneumatic Rock Drill
SKID-DRILL* Skid steer mounted
• References the existing pavement only, to assure Exclusive Standard Feature
drill package for doweling. perfect alignment and fast positioning
Quick mounts using bucket pins • 360° Swivel mount fits most backhoes and grad- Wheel and axle design allows changing from trans-
Powered by the hydraulic PTO of any suit- verse to parallel directions within seconds. Unit op-
able loader erates with wheels in a transverse direction; wheels
Fast, 1 man operation SPECIFICATIONS: change to parallel mounting to allow towing to the
Electric "joy stick" controls Weight.............................................. 1200-1800 Ibs. next location.
Fast set-up and drill time for optimum pro-
duction
Oil required ......................................7 GPM per drill Stroke ................................................................... 3"
Flushing Air.................................... 15 CFM per drill Air Inlet .............................................................. 3/4"
• Vertical and angled hole capability
Pressure .......................................... 1500-2000 PSI Weight.......................................................... 63 Lbs.
SPECIFICATIONS: Chuck Size .................................. 7/8" x 4-1/4" Std.
Oil required...................... 7 GPM @ 1500 PSI 3 Speeds............................... 1) Slow - Collar Hole
Flushing air.......................................... 15 CFM 2) Medium - Granite
Pressure .................................. 1500-2000 PSI
3) Fast - Concrete

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 62
 'Darda" Hydraulic Rock
and Concrete Splitters

Part
Description Size Number Price
"Darda" splitters break reinforced Eico Offers a Complete, Compact and Powerful Hydraulic Demolition System
concrete and all types of rock. No DARDA CYLINDER SPECIFICATIONS
shocks or vibrations. Over 700,000 Model #12 #9 #2

Ibs. of breaking force. Controls the Weight 68 Ibs.

(31kg)
50 Ibs.
(28kg)
45 Ibs.
(20kg)
direction of the break. Safe, one- Overall 50 3/4" 39" 30"
Length (1282mm) (1000)mm (750mm)
man operation. Maximum .75"-1.87" .78" .33"
Expansion (19mm-48mm) (20mm) (8.5mm)

Forced expansion inside the ma- Size Hole

Required
1-3/4"
(46mm)
1-3/4"
(46mm)
1-3/16"
(31mm)
terial causes tension. The hydrau- Minimum
Hole Depth
26"
(630mm)
18"
(400mm)
12"
(270mm)
lic cylinder contains one sliding Depth of 15" 10" 6"
Splitting (380mm) (300mm) (150mm)
plug and two feathers. The unit is Maximum 385 tons 220 tons 220 tons

inserted into a predrilled hole with Splitting (352 metric

tons)
(200 metric
tons)
(200 metric
tons)

the plug in a retracted position. As

Eico PUMP SPECIFICATIONS
the plug advances, the feathers are Model Electric 03 Air 02A Air 02 Gasoline 01
pushed aside causing the material Weight 74 Ibs. 31 Ibs. 70 Ibs. 78 Ibs.

to split. Height 24" 14" 19-1/4" 21-1/4"

Width 18" 11" 18" 18"

Recommended for walls, slabs, Depth 12-1/2" 9-1/2" 12-1/2" 12-1/2"
floors, bridges, dams-any type of Oil Capacity 5 Gal. 2 Gal. 5 Gal. 5 Gal.
rock or concrete work. Excellent 3450 RPM, Air Motor requires Air Motor Requires 3.5 h.p. B & S
115-120 Volts, 50-80 cfm at 50-80 cfm at gas engine
in reinforced concrete. 12-20 Amps -
Converted 208-
100 p.s.i. 100 p.s.i.

230 Volts, 6 -
Complete unit consists of a cylin- 12 Amps.

der, 30 ft. of high and low pressure

hydraulic hoses, quick connect
couplings, pump and lubricant.

Electric 03 Air 02A Air 02 Gasoline 01

prices of other sizes upon request
63 D & L THOMAS EQUIPMENT CORP.
 SUPER SPLITTER C-8
BREAKS REINFORCED CONCRETE AND ROCK

Expands Breaks Up to 1-7/8"

New Hydraulic Breaking Method Speeds Up Demolition Work
No Shocks or Vibrations
Over 700,000 Lbs. of Controlled Breaking Force
More Production Than Paving Breakers

Years of research now offers a new

method to break concrete and rock.

One Man Operation

New quick-lock feathers allows tool to

make larger breaks in seconds.

New unit, total new design with four

inch piston, larger bore, longer stroke
with automatic single control lever,
plug secured by knock out pin. Three
tools in one.

The DARDA splitter can break larger

pieces than a paving breaker, sizes as QUICK BREAKS - The all new C-8 Super Splitter breaks reinforced concrete in
large as your equipment can handle - seconds - it only requires a 1 -3/4" drilled hole. Single lever control is operated by
- fewer but larger chunks increase one man. It's safe, silent without shocks or vibrations.
demolition production.

NEW METHOD USES

LESS ENERGY...
INCREASES PRODUCTION

THE DARDA METHOD OF SPLITTING CONCRETE

Forced expansion inside the material to be split causes ten-
sion in the concrete to be split along a pre-determined plane.
Once tension increases beyond the tensile strength of the
concrete, it will split.

METHOD OF OPERATION
The hydraulic concrete-splitting cylinder contains the plug &
feathers assembly consisting of the plug and two feathers.
These are inserted into a pre-drilled hole while plug is in a
retracted position. As the plug advances the two feathers
are being pushed aside tearing concrete apart. The action ENLARGE BREAKS - Two new DARDA C-8 splitters make initial 3/4" split
of the hydraulic cylinder is controlled by turning a single le- through 8 foot wall in seconds. Block to right has been split and expanded to 1 -
ver only, the plug can either be advanced, retracted or main- 7/8" maximum opening using widening feathers supplied as standard equipment
tained in any position.
U.S. and Foreign Patents with the C-8 splitter.
EMACO DIV.
PLUG LUBRICATION
INTERNATIONAL
INC.

Lubricant
SLP50 ................ 1/2 Pint
SLP100 ................. 1 Pint IMPROPER LUBRICANT REDUCES
THE SPLITTERS BREAKING POWER

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 64
 JOY EYE WEDGES

The Joy Eye Wedge is a simple two-piece device for anchoring the tail sheave
at the face in a hole drilled for the purpose, it can also be used for many
other anchoring jobs underground.
Striking the wedge expands and locks the two pieces in the hole. Striking the
eye loosens the Shank for easy removal
Joy Eye Wedges are carefully made of special heat treated alloy steel

Style No. I.D. of Eye Dia. of Eff. Length Total Weight

of
Ins. Shank, Ins. Shank, Ins. Lbs.

Small 2 1 1/2 10 11.5

Medium 21/2 2 14 24.4

65 D & L THOMAS EQUIPMENT CORP.

 BETONAMIT^
We cany BETONAMIT
Non-Explosive Demolition Agent,
perfect for many indoor and outdoor demolition projects.

Betonamit non-explosive cracking agent is a non-toxic

powder. When mixed with water and poured into holes of 1 1/4", 1
3/8", or 1 11T diameter, it hardens and expands, exerting pressures
of 12,000 psL Reinforced concrete, boulders, and ledge are
fractured overnight with no noise, vibration, or flyrock.

Betonamit (pronounced beh-tah-na-mite) is

perfect for indoor and outdoor demolition
projects including:
Bridges
Dams
Machinery bases
Boulders
Ledge
Concrete Piers
Slabs 6" thick or more
Limestone
Granite
• No licenses or permits needed
• Three-year shelf life
• One product for all temperatures
• Putty type available for overhead and
horizontal holes and holes with
water seeping in
• Always wear safety goggles when using
Betonamit!
• Read instruction booklet before use!
ESTIMATING QUANTITY REQUIRED
TYPE R (LIQUID) 5 KG.
Each 5 kilo container will fill 7 Vz linear feet of 1 V$" hole, 10 linear
feet of 1 3/s" hole, or 11 feet of 1 V*" hole. HOLE DEPTH
For 1 Vz" holes: # of holes x depth in feet -*- 7.5= Maximum Hole Depth is 10 feet.
number of 5 kg. containers needed. Minimum Hole Depth is 4 times hole diameter; for example
5" with 1 !4" hole, 6" with 1 Vi". Holes shallower than 4 times
For 1 %" holes: # of holes x depth in feet •+- 10= diameter are likely to blow out.
number of 5 kg. containers needed. In reinforced concrete, drill 85 to 90% of its depth. In ledge, drill
•as deep as you want to remove. In boulders, drill 2A to ZA of
For 1 W holes: # of holes x depth in feet -f-11= the rock's thickness.
number of 5 kg. containers needed.

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 66
 ChemGrout Grouting Equipment
CG-050 Mini CG-500 Versatile
Grout Pump Grout Plant
Economical, positive displacement Complete single-skid plant pro-
piston pump delivers up to 5 gpm of vides fast mobilization. Mixes
sand/cement or premixed grouts. and pumps neat cement or sand/
Maximum pressures to 225 psi. Disas- cement up to 3:1 ratios. Deliv-
sembles in 30 seconds. Has only 3 ers 1 gpm to 20 gpm. Fits into a
wetted working parts, all enclosed for pickup truck and weighs 1,100
rugged field duties. Weighs 52 Ibs. Available Ibs. Standard pump rated for 225
with optional on/off switch at the point of injec- psi (optional pump to 500 psi).
tion. Designed for numerous small volume Clean-up in minutes. Drive
applications in construction, maintenance & power—air, electric, hydraulic,
mining. Drive power—15 cfm of 100 psi com- gasoline, diesel.
pressed air. Ships via UPS.

CG-550P Mini Grout CG-550 Mini Grout Plant

Pump & Mixer Mixes and pumps cement and flyash slurries (not sand). Per-
mits variable output from 0.5 to 5 gpm @ 225 psi. De-
Features the CG-050 air powered piston pump. Mixes & pumps signed for one man operation. All working parts
sand/cement or premixed grouts to 5 gpm with pressures to 225 enclosed for protection in rugged applications.
psi. Has added feature of large 34 gal. mixing tank for easy, Cleanup in 5 minutes. Drive power—air, electric,
continuous pumping. Mixer is air-powered. Also, available with hydraulic, gasoline.
optional on/off switch at point of injection.
Mounted on a sturdy frame. Drive power—85 cfm of 100
psi compressed air. Weighs 275 Ibs.

CG-600 Colloidal
Grout Plant
This complete, high production slurry
plant mixes and pumps cement slurries
at up to 20 gpm @ 225 psi. High speed
CG-540 Mixer & homogenizing colloidal mixer thor-
oughly wets each particle. Clean-
Spray System up in minutes. Drive power—air,
electric.
Designed for mixing and spray applica-
tion of quick setting cementitious materials
and for fast cleanup. Small batch capabil-
ity enables more application time. Pro-
vides 2 to 4 times greater productiv-
ity than other systems. Delivers up to CG-130/131 Pressure
4.5 gpm @ 150 psi. Applicator con-
trolled spray gun allows easy control Chemical Pumps
of material output. Drive power—air,
electric. Mobile, high pressure, positive displacement piston drive pumps
deliver up to 4 gpm @ 500 psi. Use for waterproofing, soil
stabilization, shaft grouting. Drive power—air.

Automated Bulk This self-contained and automated,

bulk material mixing and pumping
Grout Plant plant is designed to transport, mix and Accessories
pump cement/flyash/water slurries.
Only one operator is required. Used Mechanical Surface Packers. 12", 24", 36",
for pavement stabilization, lengths. 1-1/2", 1-3/4", 2", 2-1/2" & 3" diameters.
undersealing, slab jacking, filling
around settling manholes, grouting Grout Hose. Pressure rated to 500 psi. 1", 1-1/
behind retaining walls and other large 4", 1-1/2" & 2" diameters. With quick disconnect
grouting jobs. Select a low-mainte- fittings.
nance, positive-displacement, hy- Deep Packers. "Tigre Tierra" type inflatable in 2"
draulically-driven non-pulsing pump to 7" diameter sizes.
delivering 1 to 5 gpm @ 225 psi or
CG-625 colloidal grout plant pumping Watermeters. For batching accuracy. Allows
1.5 to 16 gpm @ 225 psi. variable operator-controlled output.
Highway & Rock Grouting Drive Packer. Of-
Accurate proportioning enables vari- fers easy insertion & removal from injection hole.
able mix ratios for each application. 1" diameter.

6 CY or 9CY bin capacity. Protected Pressure Gauges. Protected by one

foot air column. In-line mounting with snap fit-
tings supplied.
Specificatio subject to change without notic

ChemGfout
prices of other sizes upon request
67 D & L THOMAS EQUIPMENT CORP.
 ILMEG SYSTEM
Dust Collector Systems
The "ILMEG" revolutionary dust collecting system for the rock drilling industry. It offers a new concept for an efficient, dry-type
and compact collecting system. Has a powerful ventury which creates a vacuum for suction of cuttings and dust. Separator
discharges cuttings automatically to filtration chamber. Low air consumption.

This unit is totally automatic, compact, modular construction on pivotable mounting brackets. Designed for use with 2-1/2" to
5-1/2" bore holes. Hood adapts to most surface contours.

The "ILMEG" meets all safety and environmental dust standards. This is the answer to your rock drill dust problems.

AM 900 ECON 900 AS 900

A DUST COLLECTOR FOR TOP HAMMER DRIFTER
PNEUMATIC AND DTH 3" (76 mm)
TECHNICAL DATA

6 pcs 900 mm long filters

Filter area: 7.2 m2 (77.5 Sq.ft)
Suction capacity: 7-8 m3/min (247-282 CFM)
Standard nozzle: 5.0 mm
Air consumption: 1.4 m3/min (49 CFM)
Rec. working pressure: 7 bar (100 PSi)
Max bit size: 3" (76 mm)
Weight: 70kg(140lbs)
Filter cleaning: by reverse air blowing during
rod change
ECON 900 is powered by one ejector and delivered
with silencer as standard.
The following items are included in standard delivery:
Pick-up-hood
30 ft (10 meter) suction hose 3" (76 mm)
Control valve and air hoses (not fittings)
Dust collector mounting pole (std model)

AM 900 ECON 900 AS 900

A DUST COLLECTOR FOR USE WITH PNEUMATIC
A DUST COLLECTOR FOR USE WITH PNEUMATIC
DRIFTER - DTH - ROTARY DRILLS (not single pass) 5-1/2"
DRIFTER - DTH - ROTARY DRILLS (not single pass) 4"
(140 mm)
(105mm)
TECHNICAL DATA
TECHNICAL DATA
16 pcs 900 mm long filters
9 pcs 900 mm long filters
Filter area: 19.2m 2 (207 Sq.ft.)
Filter area: 10.8m 2 (116 Sq.ft.)
Suction capacity: 20 m3/min (706 CFM)
Suction capacity: 11.5 m3/min (406 CFM)
Standard nozzle: 2 x 6.0 mm
Standard Nozzle: 2 x 5.5 mm
Air consumption: Total 4.2m3/min (148 CFM)
Air consumption: Total 3.4m3/min (120 CFM)
Rec. working pressure: 7 bar (100 PSi)
Rec. working pressure: 7 bar (100 PSi)
Weight: 220 kg (484 Ibs)
Weight: 145kg (320 Ibs)
Max bit size: 5-1/2" (140 mm)
Max bit size: 4" (105 mm)
Filter cleaning: by reverse air blowing during rod
Filter cleaning: by reverse air blowing during rod
change
change
The AM 900 dust collector is powered by two ejectors and
The AS 900 dust collector is powered by two ejectors and
is delivered with silencers as standard.
is delivered with silencers as standard.
The following items are included in standard delivery:
The following items are included in standard delivery:
Pick-up-hood
Pick-up-hood
- 30 ft (10 meter) suction hose 5" (127 mm)
30 ft. (10 meter) suction hose 4" (102 mm)
Control valve and air hoses (not fittings)
Control valve and air hoses (not fittings)
Dust collector mounting pole (std model)
Dust collector mounting pole (std model)

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 68
 ILMEG SYSTEM AB
Dust Collector Systems
MACRO

• low cost A DUST COLLECTOR FOR USE WITH TWO MACHINES DRILL-
ING INTEGRAL STEELS UP TO 1-1/2" (38 mm)
• low air
TECHNICAL DATA
• no moving parts
3 pcs 900 mm long filters

complete with Filter area: 3.6 m2 (38.7 Sq. ft.)

collector, Suction capacity: 3.8m 3 /min(134CFM)
Standard nozzle: 4.5 mm
dust pick-up boot, Air consumption: 1.1 m3/min (39 CFM)
Rec. working pressure: 7bar(100PSI)
hose and swivel Weight: 40 kg (88 Ibs.)
1367, Filter cleaning: by reverse air blowing during steel
change

The MACRO is ejector powered and silencer is standard.

The dust collector is delivered including the following items:

2 x Pick-up-hood with swivel

2 x 30 ft. (10 meters) suction hose 2" (50 mm)
1 x Dust collector bracket stay

Choose from two lightweight,

efficient systems.
Choose from these two complete dust collector sys-
tems—the macro or the micro—to handle the environ-
ment conditions that will improve worker productivity with
lightweight drills. Units are available off-the-shelf and in-
stall in minutes.
These units cost very little and provide many benefits
by reducing noise, eliminating harmful dust and perform-
ing efficiently at low air consumption.
Features that are real advantages. Macro and micro
units have no moving parts to contend with or replace.
Each system comes complete with collector, dust pick-up
boot, adequate hose and swivel. Lightweight, they can
easily be moved.

prices of other sizes upon request

69 D & L THOMAS EQUIPMENT CORP.
 ILMEG SYSTEM AB
Dust Collector Systems
MICRO
• low cost
A DUST COLLECTOR FOR USE WITH INTEGRAL STEELS UP
• low air TO 1-1/2" (38mm)
• no moving parts
TECHNICAL DATA

complete with 2 pcs 600 mm long filters

collector, Filter area: 1.6m 2 (17.2 Sq.ft.)

Suction capacity: 3.5m 3 /min(124CFM)
dust pick-up boot, Standard nozzle: 4.5 mm
hose and swivel Air consumption: 1.1 m3/min (39 CFM)
Rec. working pressure: 7bar(100PSi)
Weight: 15kg(33lbs.)
Filter cleaning: by reverse air blowing during steel
change

The HANDY MACRO is ejector powered and silencer is standard.

The dust collector is delivered including the following items:

- Pick-up-hood with swivel

- 30 ft. (10 meters) suction hose 2" (50 mm)
- Dust collector bracket stay

Should you require other specification of the above, other options

are available.

Choose from two lightweight,

efficient systems.
Choose from these two complete dust collector sys-
tems—the macro or the micro—to handle the environ-
ment conditions that will improve worker productivity with
lightweight drills. Units are available off-the-shelf and in-
stall in minutes.
These units cost very little and provide many benefits
by reducing noise, eliminating harmful dust and perform-
ing efficiently at low air consumption.
Features that are real advantages. Macro and micro
units have no moving parts to contend with or replace.
Each system comes complete with collector, dust pick-up
boot, adequate hose and swivel. Lightweight, they can
easily be moved.

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 70
 Dust Collector System
MOTOR
EXHAUST AIR
The following is a partial list of some of the drill
BLOWER WHEEL Dust
models on which filler/Clone* Control Systems
IMPULSE VALVE have been successfully installed:
IMPULSE AIR
CONTROLLER Gardner-Denver Ingersoll-Rand Driltech
RDC-16 T4 D25K
SCH-2500 DM-25, 35 D35K
SCH-3500BV DM-36, 46 D40K
ELEMENT RETENTION DML D60K
SCH-4500
ROCK SHIELD GD-25 DMM D75K
FILTER ELEMENT
GD-45 DMH
GD-70 DM-60
GD-100 ECM-450
GD-120 All crawlairs

Bucyrus-Erie Robbins Sullivan (Joy)

45 R R10 Mustang
50R R12 Ram2
60R R10HD Ram3
61R 60 Stallion

Marion Chicago Pneumatic Reedrill

M4, M5 CP650 SK35

CLAMP RING

PICKUP POT
TOP GASKET
PRECLEANER
PICK-UP POT

DRILL PIPE

Listed in the table below are the basic specifications of the various models
of Filter/Clone* units currently being used on blasthole drills.

MAX. BLOW-
AIR CAPACITY Pilfer/Clone' AIR FLOW APPROX. NO. SUCTION BLOWER
(SCFM) MODEL (SCFM) HP FILTERS HOSE DIA. WHEEL

200 SIZE 1 600 1.7 1 4" 17" DIA.

300 SIZE 1.5 900 2.5 1 5" 17" DIA.
700 SIZE 2R4 2000 4.5 4 6" OR 7" 18" DIA.
1000 SIZE 3SB 3000 11.0 4 8" 20" DIA.
1300 SIZE 4SB 4000 15.0 6 8" OR 10" 19.5" DIA.
1700 SIZE 5SB 5000 20.0 7 10" OR 12" 365-BL
2400 SIZE 7SB 7000 25.0 9 12" 365-BL
3000 SIZE 9SB 9000 35.0 12 14" 400-BL

prices of other sizes upon request

71 D & L THOMAS EQUIPMENT CORP.
DURAQUIP
DUST COLLECTOR HDE 900

H Y D R A U L I C MOTOR -

SUPERIOR FEATURES OF THE

HDE SERIES DUST COLLECTOR
HIGHER SUCTION AIR FLOW
The improved design of the suction fan and the larger
area of the filtering media combine to produce higher
air velocities in the suction hose. This eliminates 82.5
blockage of the suction hose and the need for a pre-
cleaner.
EXTENDED LIFE OF FILTER ELEMENTS
The rock chips enter directly into the hopper and are
diverted from the air stream by the patented SEPA-
RATOR. Only the fine dust reaches the filters. The
result is longer life of the filter elements and lack of
abrasive wear in the main housing.
MORE EFFICIENT PURGING OF FILTERS
The up to 100 PSI reverse flushing air system in-
sures removal of dust and dust cake, even in a moist
drilling environment.
CUSTOM DESIGNED ELECTRONIC TIMER
The timer is mounted into a dust and water tight en-
closure. It allows on-site programming of the purg- TECHNICAL DATA
ing air system by simple regulation of the air pulse
frequency and duration, to satisfy varying drilling con- FILTER AREA 220 Sd. Ft. 20.4 Sd. m.
ditions. HYDRAULIC POWER REQUIRED 7 GPM @ 2400 osi 27 liters (5> 165 bar
SIMPLIFIED MAINTENANCE ELECTRIC POWER SUPPLY 12 or 24 VDC 12 or 24 VDC
Access to filter elements is provided by a hinged hop- SOLENOID HOLDING AMP. 1000 mA 1000 mA
per section, which makes inspection and replacement SHIPPING WEIGHT 500 Ibs. 226 kg.
of parts inside the collector housing a one man job,
and reduces down-time.
100% PICK-UP ABILITY
The 100% cuttings pick-up ability allows use of the HDE 1200
Model HDE 1200 Dust Collector for sampling pur-
poses.
COMPATIBILITY
This unit is compatible with all types of rock drilling
equipment in the 3.5" to 5.5" dia. hole size range.
FAN MOUNTED ON TIMKEN BEARINGS
Mounting of the fan on separate bearings, rather than
the motor shaft, allows exchange of hydraulic mo-
tors without disturbing the fan alignment.
It can be accomplished in minutes!

OPTIONAL EQUIPMENT:
• Constant suction vacuum indicator.
• Pick-up Pot Assembly, tailored for mounting on your
feed.
• Dust Collector Valve, remotely controlled (24 VDC).
• Suction Hose and Clamps.
• Special mounting brackets.
• Purge Air Pressure Regulator. TECHNICAL DATA

FILTER AREA 330 Sd. Ft. 30.6 Sd. m.

HYDRAULIC POWER REQUIRED 10 dDm (5> 1800 osi 37 liters (5> 125 bar
ELECTRIC POWER SUPPLY 24 VDC 24 VDC
SOLENOID HOLDING AMP. 1000mA 1000mA
SHIPPING WEIGHT 760 Ibs. 344 kg.

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 72
PIONEER REGENERATIVE DRYERS
Why Is Dry Air Needed?
Moisture in compressed air causes costly problems in almost every
application: Meatless Regenerative
1. In air-operated equipment, moisture washes away required lu-
bricants, increasing wear and maintenance, and decreasing effi-
Dryers (PHL)
ciency.
Typical Flow Diagram
2. In pneumatic control systems, moisture combined with other
contaminants, plugs precision orifices, causing control loss or 1. Inlet Valve (2)
total shutdown. 2. Exhaust Valve (2)
3. In process applications, moisture can contaminate the product
3. Exhaust Muffler (2)
or chemically react to produce harmful or corrosive compounds. 4. Tower Pressure Gauges (2)
5. Purge Flow Indicator (1)
4. When exposed to freezing temperatures, moisture in compressed 6. Check Valve (4)
air pipelines will freeze, resulting in partial or complete blockage
7. Purge Flow Orifice (1)
of air to vital operations.
8. Purge Adjustment Valve (1)

Why a Regenerative Dryer?

PIONEER manufactures the most extensive line of compressed air
and gas drying equipment on the market today. Standard PIONEER Figure 1 Flow diagram PHL Series
Regenerative dryers are designed for -40T pressure dew point (op-
tional -100T). They should be specified when low dew points are
desired (e.g., process air, instrument air, outdoor compressed air
piping and gas drying).

What Is Adsorption?
Adsorption is the fixation or the holding of a vapor on a desiccant's
surface without mixing with its molecular structure. Activated
aluminas and carbons, silica gels, and molecular sieves are capable
of adsorbing water vapor. In order to obtain a high degree of ad-
sorption, the surface of desiccant must be well developed. The pres-
ence of pores, fine capillaries in activated alumina, increases the
surface area to several hundred square meters per gram of product.
Because water vapor has the highest affinity for alumina, activated
alumina is the most common type of desiccant used to dry com-
pressed air and gases.

What Is Regeneration?
Regeneration or desorption is the process of stripping or removing
the condensed molecules of water vapor from the desiccant. After
the adsorption cycle, desorption is brought about by reducing the
vapor pressure. Regeneration of desiccant is accomplished by blow-
ing a very dry and/or hot gas over the desiccant bed. The dynamic
capacity of activated alumina to adsorb and regenerate is a function
of the temperature and pressure to which it is subjected.

PIIONEER Model PHL 350 with Best Aire 'Silver1.

Specifications and Dimensions
INLET
DIMENSIONS SCFM
L W H @100 PSIG
PHL-101 13 7 20 1/4" NPT 10
PHL-151 13 7 26 1/4" NPT 15
PHL-25 33 12 40 1/2"NPT 25
iiillliii 1111 llllili iiiiiiiiiii
Illlllll 11111 Illlll Illlll
1111111 I lll Illlll i llllllllllllli
PHL-100 45 18 73 1"NPT 100
PHL-125 45 18 73 1"NPT 125
PHL-175 45 18 73 1-1/2"NPT 175
iiilliiii iiilii iiiiiiii 11111111
Illlllll 11111 1111111
1111111 IIIIIIIIIII
PHL-650 55 27 86 2-NPT 650
PHL-800 83 31 95 3"FLG 800
PIONEER Model PHL 15
PHL-1000 83 31 95 3"FLG 100
Regenerative Dryer.
ilillilil iilliii llllili iiiili|i|||iiiili iillllii
111111 111111 iiiiii llllllllll illlllll
PHL-2000
liilllli Illlllll
97 40
iiilii
105
llllllllllllli
4-FLG
IIIIIIIIIII
2000
PHL-2500 98 44 108 4"FLG 2500
PHL-3000 98 44 108 4"FLG 3000
iiiiiiiiiii illlll 111111 iiiiii|l|l|iiiiii iillllii
Illlllll 111111 llllili lllillllll 1111111
1111111 Illlll ll lll iiiilillliiiiii
PHL-6000 136 60 125 8"FLG 6000
NOTES:
1. May be wall mounted; Cycle time - 5 minutes.
2. Standard voltage—115-1 -60, for voltage other than standard, consult factory.
3. Initial charge of desiccant is included. Models through PHL 175 are charged at factory. In larger sizes, the desiccant is shipped separately to avoid attrition.

prices of other sizes upon request

73 D & L THOMAS EQUIPMENT CORP.
 PIONEER Four-Step Drying Process
SUPER DELIQUESCENT DRYERS for Superior Performance
STEP 1
Incoming air/gas enters the vessel near the base
and passes through the separator section. Due to
expansion, free liquids drop to the bottom of the
chamber.
Why a Super Deliquescent Dryer? STEP 2
As the air/gas moves over the first tray it comes in
Pioneer Super Deliquescent Dryers are the only deliques-
contact with a desiccant and water mixture. It dries
cent dryers capable of suppressing, or reducing, compressed
by the process of liquid absorption.
air dew points by up to 70° F. This is important because Dew
STEP 3
Point is the temperature at which moisture begins to con-
The second tray further reduces the moisture in the
dense. In a compressed air system, measurement of the
air/gas by the process of liquid absorption.
Dew Point under pressure is called the Pressure Dew Point
STEP 4
(PDP). Knowing the needed PDP is critical for the proper
The air reaches its final and most thorough drying
sizing and operation of your Super Deliquescent Dryer (see
process by flowing over solid Veri-Dri 40 Plus des-
page 7, How to Select Your Super Deliquescent Dryer).
iccant briquettes.
A Super Deliquescent Dryer requires minimum capital out-
lay. It is easy to install and requires little maintenance. And
it will, in most cases, pay for itself in one year or less, with
FILLPORT-^ RELIEF
reduced maintenance costs and down time. VALVE
CONNECTION

PIONEER Advantages
1. Energy Efficient
No energy consuming equipment is part of the basic dryer.
2. Low Pressure Drop
Only 1% drop in the operating pressure.
3. Exceptional Reliability
No moving parts to fail in Pioneer's simple design.
4. Minimum Desiccant Consumption
More than half of the moisture is removed in the first three
steps of the drying process, none of which require addi-
tional desiccant. This reduces the desiccant usage, per
pound of water removed, to less than half that of competi-
tive systems.
5. Minimum Maintenance
Inspect your Super Deliquescent Dryer about once a week
to maintain desiccant at or above the sight glass level.
6. No Drain Clogging
The drain flows freely because the condensate from the
dryer is free of large solid particles.

DRAIN

Figure 1
Trays capture solids in the Super Deliquescent Dryer, so
that the condensate, free of solids, flows over the trays thus
preventing drain clogging.

PIONEER SPECIFICATIONS AND The PIONEER Portable Air System comes complete with a
SD750 Super Deliquescent Dryer, air-motor driven air-
DIMENSIONS cooled after cooler, Centri-Flo moisture separator and a float-
type automatic drain. This system requires no electricity.

NOMINAL CAPACITY IN SCFM @ 100 PSIG5 ^H

30° F 40° F 50° F 60° F 70° F INLET/ OVERALL OVERALL PRESS VESSEL DESICCANT ^H
MODEL D.P. D.P. D.P. D.P. D.P. OUTLET DIAMETER HEIGHT RATING WEIGHT WFIOHT
Vvtlorl 1 ^HH
^BUn
NO. SUPP. SUPP. SUPP. SUPP. SUPP. INCHES INCHES INCHES PSIG1 LBS. LBS.2 •11
SD10 11 10 9 8 7 1/2" NPT 9 33 200 45 9 I
I I
SD25 28 25 22 20 17 1/2" NPT 9 49 200 75 23 111
SD50 55 50 45 40 36 3/4" NPT 9 76 200 120 45 111
SD75 83 75 68 61 55 1"NPT 11 69 200 160 68
SD100 110 100 90 81 73 1"NPT 11 83 200 240 90 111
SD150 165 150 135 122 110 1"NPT 13 82 200 300 135 11
SD200 220 200 180 162 146 1-1/2" NPT 15 81 200 350 180 ill
SD250 275 250 225 203 183 1-1/2" NPT 15 87 200 380 225 ill
SD300 330 300 270 243 219 2" NPT 19 76 150 450 270 III
SD400 440 400 360 324 292 2" NPT 19 89 150 525 360 II
II
SD500 550 500 450 405 365 3" NPT 20 90 150 600 450
SD625 687 625 563 507 457 3" NPT 22 90 150 690 563 1!
SD750 825 750 675 608 548 3" NPT 26 85 150 820 675 Ill
SD1000 1100 1000 900 810 729 3" NPT 26 100 150 1045 900
SD1250 1375 1250 1125 1013 912 3" NPT 32 92 150 1250 1125 II
SD1500 1650 1500 1350 1215 1094 4" FLG. 38 90 150 1600 1350 fly
SD1750 1925 1750 1575 1418 1277 4" FLG. 38 97 150 2000 1575 || i
SD2000 2200 2000 1800 1620 1458 4" FLG. 44 93 125 2500 1800 111
SD2500 2750 2500 2250 2025 1823 4" FLG. 44 102 125 3100 2250 1!
SD3000 3300 3000 2700 2430 2187 6" FLG. 50 105 125 3700 2700 II
SD3500 3850 3500 3150 2835 2552 6" FLG. 56 97 125 4300 3600 II
SD4000 4400 4000 3600 3240 2916 6" FLG. 62 95 125 4900 3600 ill!
SD5000 5500 5000 4500 4000 3600 8" FLG. 75 93 125 5900 4500
SD6000 6600 6000 5400 4900 4400 8" FLG. 75 106 125 6900 5400

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 74
How Does a Refrigerant Air Drying System PIONEER
(R & ADR) Work?
The warm, moist air enters the air to air heat exchanger, where
Refrigerant Air Drying
it is precooled with outgoing cool air. Precooling allows use of
a smaller refrigeration unit and lowers the cost of drying. The
precooled air is further cooled down to the 35°F range in the
air to refrigerant heat exchanger. The cooling capacity is pro-
vided by a refrigeration system. The cooling of compressed
air causes condensation of moisture which is separated by a
highly efficient centrifugal separator. Condensed moisture is
drained automatically by an automatic drain from the separa-
tor.

The cold dry air flows through the air to air heat exchanger PIONEER R - Series Dryers
where it is reheated by the incoming warm air. Re-heating In accordance with NFPA and ACGI standards, dryer, capacities are based on 1OO'F and 10OPSIG Inlet, 10OT Ambient,
increases the volume of air, prevents the sweating of air lines 35T range POP, and maximum pressure drop of 5 PSIG. FOR CONDITIONS OTHER THAN STANDARD PLEASE
and lowers the relative humidity of the air — Thus enabling it REFER TO PAGE 10.
to do more work. The clean dry air is then available for use.
(Heat Exchangers and Refrigeration Systems in an 'ADR' Sys- Rating & General Data (Direct Expansion Design)
tem are about twice the size of that of an 'R' series dryer of
equal capacity).

MODEL
SCFM NOM.
H.P.
DIMENSIONS©
AIR STD. 0
MAX©
WORK APPROX
®@
© AP IN/OUT VOLTAGE
PRESS WT.

r|t
35° PDF 50° PDF PSIG L W H

R10A/W®
R15A/W
10
15
15
18
2.5 1/6 15-1/2 13-1/4 1 0-3/4 3/8" O.D. A 50
4.0 1/6 15-1/2 13-1/4 1 0-3/4 3/8" O.D. 55
R20A/W 20 25 4.0 1/5 20 15 18 1/2" NPT 85
R25A/W 25 30 2.0 1/4 20 15 18 1/2" NPT g 90
R35//W 35 45 3.0 1/4 20 15 18 1/2" NPT c 95
R45A/W 45 55 4.0 1/4 20 15 18 1/2" NPT ^ o 100
R55A/W 55 65 3.0 1/3 23 18 17 3/4" NPT 3^
^CDC3
Co . 120
R75A/W 75 90 4.0 1/2 23 18 17 3/4" NPT LO C 130

(r/v
^ o
R100A/W 100 120 2.5 1/2 32 22 28 1-1/2" NPT 250 PSIG 225
I c
R125A/W 125 150 2.5 3/4 32 22 28 1-1/2" NPT rTT 250
R150A/W 150 180 3.0 3/4 32 22 28 1-1/2" NPT | 270
R200A/W
R250A/W
200
250
240
300
3.2
3.5
1
1-1/2
32
32
22
22
28
28
1-1/2" NPT
2" NPT
~L k
o
c^ I 290
320

I
R300A/W 300 360 4.0 1-1/2 32 22 28 2" NPT o V 350
R400A/W 400 480 2.5 2 43 26 34-1/2 2-1/2" NPT -si-
550
R500A/W 500 600 3.0 3 43 26 34-1/2 2-1/2" NPT "si- 750
"si-
R600A/W 600 720 3.5 3 43 26 34-1/2 2-1/2" NPT 850
R800A/W 800 960 2.5 4 56 35 43-1/2 3" NPT 1150
R1000A/W 1000 1200 3.0 5 56 35 43-1/2 3" NPT 1400
R1200A/W 1200 1440 3.5 6 56 35 43-1/2 3" NPT o 200 PSIG 1600
R1600A/W 1600 1920 2.5 4+4 62-1/2 61 73-1/2 4" FLG. co 2200
R1800A/W 1800 2160 3.0 4+5 62-1/2 61 73-1/2 4" FLG. o
2500
R2000A/W
R2400A/W
R3000A/W
2000
2400
3000
2400
2800
3600
3.5
4.5
3.0
5 +5
6+6
15
62-1/2
62-1/2
103
61
61
70-1/2
73-1/2
73-1/2
43
4" FLG.
4" FLG.
6" FLG.
c
<:0
s
h
^ c
c^
c
I 2800
3100
4000
R3500A/W 3500 4200 4.0 20 113
LO g /\
70-1/2 43 6" FLG. o 4500
R4000A/W 4000 4800 4.5 20 123 u•)
70-1/2 43 6" FLG. u•) 5000
R5000A/W 5000 6000 4.5 25 154 79 45 8" FLG. 6000
R6250A/W 6250 7500 4.5 30 170 79 45 8" FLG. 7500
R7500A/W
R10000A/W
R12500A/W
R15000A/W
7500
10000
12500
15000
9000
12000
15000
18000

FOR LARGER SIZES CONSULT FACTORY

4.5
4.5
4.5
4.5
40
50
60
75
184
160
176
190
79
79
79
79
45
73
73
73
10" FLG.
12" FLG.
12" FLG.
12" FLG. I / vw
150 PSIG
V
8500
12000
14500
17000

TABLE 1

Typical Flow Diagram For R & ADR Systems NOTES:

'A' for air cooled and'W for water cooled. Capacities of water 4. For voltages other than standard consult factory.
NOTES: 1. Typical temperatures in 'R' series dryers. cooled units are 6 percent greater. 5. For higher working pressures up to 10,000 PSIG consult factory.
2. Typical temperatures in 'ADR' series dryers.
Notify factory for 50°F POP applications. 6. For lower working pressures down to atmosphere, consult fac-
3. Standard drain system in R100 (ADR50) & up.
Wet Dry __ Dimensions subject to change without notice. For R3000 & up, tory.
4. r~n dimensions are for water cooled and remote air cooled units only.
For mounted air cooled units consult factory. For R1600 & up,
7. FOR GASES OTHER THAN AIR, CONSULT FACTORY.
8. For Mr. Goodaire System, add 25%.
Air Air Freon
dimensions are for units without cabinets. 9. For Mr. Goodaire Plus System, add 50%.
5. Provided in R35 (ADR20) & up.
6. Standard drain in R3000 (ADR1500) & up,
optional in smaller sizes.

PIONEER 'R'Series Dryers

prices of other sizes upon request

75 D & L THOMAS EQUIPMENT CORP.
AIR WINCHES

LIFT 1000 TO 40,000 LBS. WITH

stalling, or sustained lugging. They operate without danger in gas-
PISTONAIR™ MOTORS
eous areas and are practically unaffected by moisture, heat, or corro-
Air Winches powered by high torque Pistonair ™ motors offer eco- sive atmospheres
nomical, dependable lifting power at capacities up to 40,000 Ibs. Air
winches find use in general construction, underground and open pit SIMPLE CONTROLS FOR SAFE OPERATION
mining, in oil fields, as well as in the expanding offshore drilling indus-
Single throttle control provides variable speed and instant reversibility
try, and in many industrial applications.
for precise load manipulation. The throttle is springloaded "off" for
safe "dead man" control. A toggle-operated external band brake is
HIGH TORQUE PISTONAIR ™ MOTORS used to stop and hold the load in place. Some models include a safety
High torque, reversible Pistonair ™ motors assure safe, positive lifting dog lock which securely locks and suspends the load with complete
power with sensitive single throttle control for accurate handling of safety. Several optional automatic and remote control arrangements
loads. Pistonair motors cannot be damaged by overload, repeated are available.

WINCH SPECIFICATIONS
Maximum
Rope Pull Rope Pull Rope Speed Drum Cap. (Ft.)
Lbs. (stall) Lbs. Ft./Min. Rope Dia. (in.)
Model First Turn Half Drum Half Drum Smooth Wind
AW-80 2,000 1,000 40 125'-3/8"
EW-111 7,100 2,200 100 230'-1/2"
JHA-20 5,200 2,400 120 400'-1/2"
JHAL-20 5,200 2,400 120 1020'-1/2"
JHA-40 7,500 4,300 60 400'-1/2"
JHAL-40 7,500 4,300 60 1020'-1/2"
LF-113 6,400 3,600 125 1125'-5/8"
JHA-60-24 11,000 7,000 50 1400'-5/8"
AF-112 12,500 8,100 65 970'-3/4"
JHA-100 21,000 10,200 50 1 690'-3/4"
OS-111 A 26,000 16,000 40 2500'-3/4"
OS-111 B 26,000 16,800 40 940'-3/4"
OS-200 40,000 20,000 50 2300'-1"

Rope Pull and Rope Speed rated at 100 psi.

Sullivan
Machine'y Company

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 76
 INDUSTRIES, INC.
Scorpion SC MS-1 Extendable RAM MS-3

Engine: CAT3116TA N/A

Power 260HP(194KW) N/A

RAM
Operating Speed 2600 RPM N/A

Compressor:
Rated Delivery 900 cfm (25.5 m3/min) N/A
Operating Pressure Range 70-11 5 psig N/A
(483-793 kPa)
Ambient Operating Temp. -20°- + 125°F N/A
Range (-29° - + 52°C)
Oil Receiver Capacity 30 gal. (114L) N/A
Type Cooling System Oil to Air N/A

Tracks:
extendable boom track drill Grouser Plate Width
Overall Track Length
10" (254 mm)
9'10" (299.7 cm)
10" (254 mm)
9'10" (299.7 cm)
Track Width 95" (24 1.3 cm) 95" (241. 3 cm)
- efficiency with economy Boom & Guide:
Max. Horizontal Boom Swing 40° right/500 left 40° right/500 left
Max. Vertical Boom Movement 50° up/300 down 50° up/300 down
Max. Guide Swing 90° left/400 right 90° left/400 right
For users who have portable air, there's nothing Max. Guide Dump 140° 140°
like the original RAM extendable boom track drill. Boom Extension 51 (152.4 cm) 5'(152.4 cm)
Drill Travel 14'(426.7 cm) 14'(426.7 cm)
It gives you the advantages of over 20 years of Guide Extension 4'(121.9 cm) 4'(121.9 cm)
development, field experience, and improvement. Minimum Toe Hole Angle 12° 12°
It's ideal for line drilling, production work, and General Specs:
I development drilling in mining, quarrying, and Gradeability 30° 30°
III heavy construction. Feed Motor Radial piston Air Radial piston Air
Tram Motor Radial piston Air Radial piston Air
Tramming Speed 2.25 MPH 2.25 MPH
IllIIIIIIJIIIIIIJll:;, The RAM's long, wide, low chassis/track Steel Change 12'(365.7 cm) 12'(365.7 cm)
Steel Single Pass 14'(426.7 cm) 14' (426.7 cm)
|III|||JIII||)|J||le and extra weight give it the stability and Weight 19,500#Dry(8845kg) 14,700#Dry(6667kg)
IIIIIIIIIIIIIIIIIIIIIIIIIl balance needed for tramming and Shipping Width 8' (243.8 cm) 8' (243.8 cm)
IIIIIIIIIIIIIIIIIIIIIIIIIl setting-up even in difficult terrain. Operating Width 8' (243.8 cm) 8' (243.8 cm)
Overall Length (tower down) 25' (772 cm) 22T(673cm)
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIll;;:, ItsS'-longextendableboom Overall Height (horizontal hole) 20'8" (630 cm) 21'(640 cm)
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII;:;:;^ makes drilling easier in tough Ground Clearance 12" (304.8 mm) 12" (304.8 mm)
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII^^ spots. The chassis provides a Optional Equipment:
IIIIIJIJIIJIIIIJIIIIIIIIIIIJIJIIIJIIIIIIIIIIIII^^ drilling platform -and, Dry-Type Dust Collector
Illlllllllllllllllllllllllllllllllllllllllllllllll)^ VCR-360or361 Pre-Cleaner
Compressor Enclosure
|l||||||||||||ation drills, the RAM will put Utility Winch
|||f||||||||J||||es in the hardest rock with Deflector
Backup Alarm
||||||||||||||||jlllp rod u ct i o n an d re I i ab i I i ty.

DRILL ENGINES
(Metric units in parenthesis)

VCR-360 VCR-361
Bore diameter 5 1/4 in. (134mm) 6 1/2 in. (165 mm)
Stroke 3 5/8 in. (92 mm) 3 3/4 in. (95 mm)
Drill steel 1 1/2" (38 mm) or 1 3/4 1 3/4 in. (45 mm)
Striking Bar -Threaded for optional steel systems-
Rotation Type -Independent-
AirtubeOD/ID 5/8 in./1/2 in. 3/4 in 75/8 in.
Air hose (ID), drill 2 in. (51 mm) 2 in. (51 mm)
blow 1 in. (25 mm) 1 in. (25 mm)
rotation 3/4 in. (19 mm) 3/4 in. (19mm)
Hole size range 2 1/2 to 4 in. (64-1 02 mm) 3 to 4 in. (76-1 02 mm)
Air Volume, drill & blow 600cfm(16.8m3/min.) 850 cfm (24 1 m3/min.)
drill only 325cfm(9.1m3/min.) 485cfm(13.7m3/min.)
Air Pressure 100psi(7kg/cm2) 100psi(7kg/cm2)
Blows/min. 2250 bpm 2050 bpm
Net weight 483 Ibs. (219kg) 510 Ibs. (231 kg)

prices of other sizes upon request

77 D & L THOMAS EQUIPMENT CORP.
 INDUSTRIES, INC.

This is
W SCORPION
... proven performance in the new
SCORPION
Sullivan self-contained, pneumatic
...the first Sullivan self-contained air track drill, with
flexibility and features you won't find anywhere else. track drill for tomorrow's workload
Scorpion is based on the proven efficiency, economy
and low maintenance performance of Sullivan's Re-engineered from time-proven Sullivan RAM track drill
pneumatic RAM drills - equal to or better than equal-
capacity hydraulic units, with lower purchase price, Q O O c u . f t . of on-
Uses dependable 5-ft. hydraulic board air delivers
lower operating costs, greater reliability, and easier, less Sullivan VCR-360 and boom extension ample drilling power
frequent, less expensive maintenance. VCR-361 valveless, delivers the reach plus new
continuous rotation you need to drill in maneuverability,
drills different locations flexibility
For the Scorpion, we have re-engineered proven RAM
technology to take full advantage of on-board air.

Now, a single operator can unload, set up and operate

the versatile Scorpion. Not only is set-up time reduced, Caterpillar 3116 TA Diesel engine w/
130-gallon fuel tank for full-shift
but you will find that in most cases the Scorpion will operation
effectively drill with a hydraulic drill. The big difference
that you will note is the lack of downtime, when
compared to hydraulics. Our drifters can even be
repaired in the field, if necessary, thus cutting
maintenance costs even further.

With a 900 CFM air compressor integral to the Scorpion,

we have added weight and stability to the unit. For even
further flexibility, the compressor can be removed intact Hydraulic track oscillation ensures
stability on uneven terrain, lets you
from the mainframe, and the Scorpion will still perform reach unusual drilling sites.
using a portable air compressor if necessary.
Driver-Operator
platform stand is now
The new Scorpion and its companion, the RAM, are the a standard feature
heaviest of the medium-weights...the strongest and SC/MS - 1
most rugged units in their class.
Totally Self-Contained Air Track Options include
Nothing else even comes close. Dependable VCR 360 or 361 Drifter dust collector, pelletizing
Caterpillar 3116 TA Engine Power tank, radiator/heat deflector,
130-Gallon Fuel Tank utility winch for a safety line,
5-Foot Hydraulic Boom Extension back up alarm and
Accessible, user-friendly tramming, boom and drill
enclosure
controls plus full instrumentation for one-person Excellent Stability and Balance
operation. Superior Tramming Ability
Rugged, Low-Profile Undercarriage
Hydraulic Oscillation
Operator Friendly Tram, Boom and Drill Controls
Unitized 900 CFM Air Compressor - 100 PSI - Can Be
Easily Removed From Mainframe Intact

VCR-360 and VCR-361:

More Drilling With Less Air,
Less Fuel
These VCR air-driven valveless continuous rotation drill
deliver percussion and rotation in separate operations.
Each has only one moving part in the hammer - the
piston. This valveless design penetrates faster than
conventional designs. Rotation is independently
powered by an efficient gear-type air motor. The
rotation rate is infinitely variable to suit drilling
conditions. The two drills differ only in size and air
requirements.

These drifters can be retrofitted to competitive units,

thus making them more productive.

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 78
The new X?5"259 hammer lets you: SULLIVAN
vLrK-obi
Continuous Rotation Drill
Drill faster.
While this is only one of the advantages of the new SULLIVAN Valveless
Continuous Rotation VCR-360 / VCR-361 drill hammers, it may be the
one you're looking for. It could save the cost of a new track drill. If
you're operating off a 750 or 900 CFM compressor, the VCR-360 / VCR- Specifications
361 respectively could deliver up to 40% more rock production than your
old drill. Your present medium class track drill could take on a new bite.
VCR-360 Drill Specifications VCR-361 Drill Specifications
Bore Diameter 5-1/4" (134mm) Bore Diameter 6-1/2" (166mm)
Use a dry dust collector. Stroke 3-5/8" (92mm) Stroke 3-3/4" (95mm)
If you're powering your present medium class drill with a 750 or 900 Striking Bar Threaded for Striking Bar Threaded for
CFM compressor, our VCR-360 gives you another option. Add the dry optional steel optional steel
dust collector and still maintain your present drilling rate. It's like getting
extra capacity out of your compressor — without buying a new com- Drill Steel 1-1/2" O.D. Std., Drill Steel 1-3/4" O.D.
pressor. 1-3/4" O.D. optional
Rotation Type Independent Rotation Type Independent
Hose Size 2" Drill, 1"Blow Hose Size 2" Drill, 1" Blow
Save your compressor's life.
Can you throttle down your present 800 or 1050 CFM compressor and Hole Size Range 2-1/2" to 4" bitdia. Hole Size Range 3" to 4" bit dia.
(64 to 102mm) (76 to 102mm)
get some cost benefits? We've already found with Caterpillar engines
on our own portables, our new VCR-360 / VCR-361 hammers, drill and Air Pressure 1 00 psi (7 kg/cm2) Air Pressure 100 psi (7 kg/cm2)
blow with efficiency. You can operate your engine slower, save fuel and Air Requirements 600 cfm Air Requirements 850 cfm
prolong your engine life — providing you've got the new VCR-360 or (16.8 rrvVmin) (24 m3/min)
VCR-361. Drill & Blow (up to Drill & Blow (up to
2500 ft. above mean 2500 ft. above mean
sea level) sea level)
Drill Weight 496 Ibs. (225 kg)
Drill Weight 496 Ibs. (225 kg)
AIR TUBE

MUFFLER

ROTATION MOTOR

STRIKING BAR
VCR-360 / VCR-361 Retrofit Kit
COUPLING

STEEL
Your SULLIVAN Distributor will
outfit you with the new
VCR-360/VCR-361 Retrofit Kit.
VCR-361 Drill Operation
The two basic operating functions of Tell him your plans about compressor capacity,
the VCR-361 drill—percussion dust collection, rock production you're shooting for
and rotation—are accomplished on your upcoming job—he'll show you all the de-
independent of each other. tails on the new VCR-360/VCR-361. And where it
BIT can give you more performance than you're get-
ting while cutting your costs.
Percussion. Air entering the drill passes directly Rotation. A separate air inlet admits air to a gear-
to both ends of the piston. The piston reciprocates type air motor. The air motor transmits torque
in the cylinder in a valveless cycle in which the through the rotation gearing to the chuck driver
piston itself operates as a valve, alternately ex- which is splined to receive the striking bar. Rota-
posing and covering ports on the ends of the cylin- tion (rpm) of the drill steel is continuously variable
der. This is a volume expansion controlled cycle by use of the rotation valve on the drill feed.
using only one moving part—the piston.

prices of other sizes upon request

79 D & L THOMAS EQUIPMENT CORP.
 , INC.
GARDNER-DENVER r

SPECIFICATIONS ATD3800

Overall length without boom

and feed .................................. 10' 5-1/2" (3.20 m)
Height ground to top of
operating console............................ 5' 3" (1.60 m)
Sprocket to sprocket (center
line) length ................................ 6' 9-1/2" (2.08 m)
Ground contact area ........ 11.9 sq. ft. (1.11 sq. m)
Ground clearance (center HP
area).................................................. 12" (0.31 m)
Transport width ......................... 7' 8-3/4" (2.36 m)
Drawbar pull........................ 12,600 Ibs. (5715kg) or
Gradeability with compressor ........................40%
Speed with compressor......... 1.4 mph (2.25 kph)
Boom lift.................... 50° above & 15° below hor.
Boom swing ............................... 40° left 40° right
Feed swing................................. 34° left 34° right
Feed swing-reindexed ............... 92° left 97° right
Track oscillation ....................................... 15° total
Weights:
Air Trac carrier ......................8,600 Ibs. (3901 kg)
Total Air Trac with HDAF12
Feed and PR66 Drill............ 12,500 Ibs. (5670 kg)

PLANETARY

D & L THOMAS EQUIPMENT CORP. 80

TEREX REE

» 360° Continuous swing offers the largest drill pattern available (395 sq. ft) double that
of competitors
* Full body rotation allows for safer > Proven (M 312 Excavator
tramming down steep inclines undercarriage
* increased ability to approach angles »Tram highwalls more safely with
for drill holes upper body turned 90°
Robust.HPR4519 rock drill is field serviceable
Longest single pass capability
SinartDrilP is a hydraulically operated drill control system ttiat allows operators to drill
more effectively by utilizing anti-jam, anti-plug, and anti-plunge features, SmartDrilP
operation iengtiens drill string life and has proven to increase overall production.

Quarry * Construction * Mining

81 D & L THOMAS EQUIPMENT CORP.

TEREX Reedrill R20T Hydra-Trac

DRILL PATTERN COVERAGE

395.5 SQUARE FEET
36.75 SQUARE METERS
4'(1.22m) EXTENSION BOOM

Weight 32,400 Ibs 14,696 kg

Overall width 90 inches 2,286 mm
Overall height 122 inches 3,099 mm

Model &KW HPR45 25 HP HPR45 19 kW

—^^ —^^
Number of blows
Number of revolutions 0-300 rpm 0-300 rpm

Ground Clearance 17 inches 431 mm

_^___
Tramming speed 3 mph
Gradeability 35 deg 35 deg
^
14.7 inches 500 mm

Model Isuzu 6BG1TQF Isuzu 6BG1TQF

Speed 2,400 rpm
____^^
2,400 rpm
Fuel Capacity ___^^
80 gal
—————^
RatedOutput

Type of pump piston/gear piston/gear

Reservoir capacity

Boom length 120 inches 3,048 mm

Boom swing angle 360 deg 360 deg
Boom extension 48 inches

Max. starter rod standard 192 inches 4,877 mm

Max. starter rod optional 240 inches 6096 mm
Max. single pass standard 169 inches 4,293 mm
Max. single pass optional 222 inches 5639 mm
Feed rate 37 m/min

Model Gardner Denver Tempest 12

________^^ Gardner Denver Tempest 12
Free air delivery maximum 7 m3/min
-—^^ -—^^
Working pressure

TEREX REEDRILL

D & L THOMAS EQUIPMENT CORP. 82

TEREXlREEDRILL

^ Robust HPR5128 rock drill is field serviceable witti almost half the total parts of the
competitors- making service a breeze
^ Optional 60 or 68 mm steel capability
» W C-10 Tier II Engine 310 hp {231 kW) @ 1800 rpm
^ Heavy-duty, long-life mainframe weidment is mounted on excavator undercarriage lor
advanced stability in rough terrain
I TEREX Reedriil dust collector is powerful and efficient allowing virtually no dust
^ Simple hydrayiic system is easily maintained
I Reliable linear rod changer offers trouble free operation
I Two man swing cab for optimal visibility and comfort
Quarry * Construction * Mining

83 D & L THOMAS EQUIPMENT CORP.

TEREX Reedrill SCH 5000 C/CL
Hydra-Trac

Weight C/CL 43,500/45,000 \bs 19,731/20,412

___£^^ M.......
Overall width 103 inches mm
Overall height 133 inches 3 380 mm
H •11
:
^s*W^W?^iiiiiii

'¥odei¥KW'"' HPR5128 37 HP HPR5128 28 kW

900 Ibs i
Number of blows
Number of revolutions 0-150 rpm rpm

Ground Clearance 13. inches mm

Tramming speed
Gradeability

Model CATC-10 CATC-10

Speed 1,800 rpm 1,800
Fuel Capacity --^
RatedOutput "~~~^

Type of pump
m
piston/gear piston/gear
_™™™»™
Reservoir capacity

Boom length C/CL 101/108 inches 2,570/3,048 mm

Boom swing angle
^^
Boom extension 36/NA inches

Max. starter rod standard C/CL 168/264 inches 427 / 671 mm

Max. starter rod optional NA inches NA mm
Max. single pass standard 150/246 inches
Max. single pass optional NA inches
Feed rate

Model Gardner Denver Gardner Denver

Free air delivery maximum 11.3 m3/min
Working pressure """"""""""""""""""""""10 bar

51 mm 5x3,658+1 / 4X6,096+1

TEREX I REEDRILL

D & L THOMAS EQUIPMENT CORP. 84

 EEDRILL

^ Robust H PR451 9 rock drill is field serviceable with fewer total parts than competitors
- making service a breeze
^ Optional 51 mm steel capability
^ CAT C-9 Tier II Engine 275 tip (205 Wf) @ 1 BOO rpm
> Hea¥y-du% long-life mainframe weldHient is mounted on excavator undercarriage
for advanced stabilif in roygh terrain
I TEREX Reedrill dust coliector is powerful and efficient showing virtually no dust
^ Simple hydraulic system is easily maintained
> Reliable linear rod changer offers trouble fee operation

Quarry • Construction * Mining

85 D & L THOMAS EQUIPMENT CORP.

TEREX Reedrill SD345/345C
Hydra-Trac

Weight CAB/NON-CAB 42,000/39,500 Ibs 19,090/17,855 kg

Overall width 102 inches 2,590 mm
Overall height 122 inches 3,099 mm

'¥ocleiTm HPR4519 25 HP HPR4519 19 kW

660 Ibs 300 kg
Number of blows
Number of revolutions 0-300 rpm 0-300 rpm
^^W^^W^^^^^^^^^M

Ground Clearance 15 inches 380 mm

™^™»__
Tramming speed 3 mph
GradeabiSity 35 deg 35 deg
14.7 inches 500 mm
•
Model CATC-9 CATC-9
Speed 1,800 rpm 1,800 rpm
mmmmm.^m— _™»^™^_
Fuel Capacity _™™™.™™__ _™™™™™»__
RatedOutput
•lyiiyyii^yyyyyiiyiy iiiilil •
Type of pump piston/gear piston/gear
Reservoir capacity

Boom length 150 inches

^^^^^ 3,810 mm
Boom swing angle
Boom extension CAB/NON-CAB 36/60 inches '

Max, starter rod standard CAB/NON-CAB 216/240 inches 5485/6096 mm

Max, starter rod optional - single pass only 288 inches 7315 mm
Max, single pass standard 222 inches 5,638 mm
Max, single pass optional 270 inches 6858 mm
Feed rate """"""""""""120 ft/min 37 m/min

Model
•III
Gardner Denver
m
Gardner Denver
Free air delivery maximum 7 m3/min
Working pressure bar

5+1 rods 3,658 or 4,267 mm

TEREX I REEDRILL

D & L THOMAS EQUIPMENT CORP. 86

 Count on Gardner-Denver Hydraulics for
the World's Most Practical Drilling Equipment
HPR1H Hydra-Drill TM Hydra-Drill™
Hydraulic Percussion Rock Drill
Model HPR2C
The heart of the rig is the HPR2 hydraulic drill which
develops more than one million foot pounds of energy
per minute of operation. This "State-of-the-Art" ma-
chine features the proven HPR1 valve system with all
major parts protected by replaceable bushings. The
standard drill is equipped with dual rotation motors with
the capability to use four (4) rotation motors with maxi-
mum torque up to 3,000 ft.-lbs. The drifter is designed
to operate in the 3-1/2"-6" hole size range.

HEAVY-DUTY CHUCK-END ASSEMBLY - The

HPR1HA features a chuck-end assembly, which is de-
signed to give you maximum life, while drilling holes
2-1/2" diameter and larger in hard rock. Wear areas on
the chuck, chuck driver, bearing plates, mounting bolts
and other allied parts have been increased by 75 to 100
percent, thus giving maximum life under the most adverse
drilling conditions.

Specifications Specifications
U.S. U.S.
Weight 480 Ibs. Weight 880 Ibs. w/o slide
Total Energy 750,000 ft. Ibs./minute Total Energy 1.2 Million ft. Ibs./minute
Impact Frequency 2500-4000 BPM Impact Frequency 2520@3150PSI
Rotation Speed 0-300 rpm Rotation Speed 0-150 RPM
Rotation Torque 500 ft.-lbs. (MAX) Rotation Torque 1,000ft. Ibs.
Operating Pressure 3100psi(MAX) Operating Pressure 3150PSI(Max)
Recommended Drill Steel 1-1/2"rd.to1-3/4"rd. Recommended Drill Steel 2" Rd. - T51
with G38 or G45 Threads
prices of other sizes upon request
87 D & L THOMAS EQUIPMENT CORP.
 4f""!*i*K-GARDNER-DENVER HYDRA-TRACS
SCH5000C Standard Features
Hydraulic powered, sound supressed, pressur-
ized operations swing cab
Twelve foot (121) Model HUFH12 steel chan-
nel chain
Linear rod changer for five (5), 12' drill rods
Steel changing system handles steel for 72'
hole
Eight foot (81) telescopic swing boom with three
foot (31) extension for maximum vertical pat-
tern coverage

Alternate

•111

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 88
 \R€€DKILL, INC.
GARDNER-DENVER

• 285 hp diesel engine

• Proven, simple linear rod changers
• Reliable manual and electric actuated
pressure compensated hydraulic control
valves
The SCH5000 series Hydra-Tracs® • Four (4) pump dedicated hydraulic drill
are all fully self-contained track system
mounted units which mount the most • Gardner-Denver hydraulic motor driven
productive percussion drill available - 350 cfm self regulating screw compres-
The Model HPR2. sor
All models of the SCH5000 series have the • Multiple element dry dust collecting sys-
following standard features: tem with feed mounted pre-cleaner
• All O-ring face seal hydraulic fittings
• Two speed hydraulic motor driven D-4 type track • Drill collaring circuit
assemblies with 15 inch triple grousers • Separate control station for manual con-
• Hydraulic cylinder controlled track oscillation trol of all boom and tramming functions*
AIR COMPRESSOR FEATURES

Diesel Hydraulic Power - GARDNER-DENVER ROTA-SCREW COMPRESSOR

- 350 CFM AT 100 PSI
Power for the SCH5000 series Hydra-Tracs® is supplied - 160 PSI CAPABILITY
- TWO-STAGE DRY TYPE AIR FILTER WITH SAFETY
by a CAT Model 3306DITA, 285 bhp at 1800 rpm, water ELEMENT
cooled diesel engine which is both turbo charged and af- - DRIVE MOTOR
AXIAL PISTON
ter cooled. The unit is equiped with an automatic engine 5.49 IN.3/REV. FIXED DISPLACEMENT
throttle which provides full engine power only during the 5,000 PSI RATING
- OUTPUT FLOW CONTROL LOCATED AT TRAM STA-
drilling operation for energy saving economic operation. TION

Operator's Swing Cab

Features Include: Pressurized dust free environment with
filtered circulating air, sound suppressed design, full vi- Model HPR2C
sion 1/2" tinted glass windows, economically located con-
trols and gauges for all drilling, boom and tramming func-
tions, comfortable full adjustable bucket seat with seat belt,
air conditioner, hot water heater, windshield wipers and
two(2) drilling lights.
TWO DRILLER STATIONS The HPR2 Drifter
SCH5000 Swing Arm Control The heart of the rig is the HPR2 hydraulic drill which
develops more than one million foot pounds of en-
This control arm mounting gives the driller a movable con- ergy per minute of operation. This "State-of-the-Art"
trol location for all of the drill, feed, rod changer and boom machine features the proven HPR1 valve system with
functions. The control arm can be moved both vertically all major parts protected by replaceable bushings.
and horizontally by two hydraulic cylinders. This conve- The standard drill is equipped with dual rotation mo-
tors with the capability to use four (4) rotation motors
nience allows the operator to position the control station with maximum torque up to 3,000 ft.-lbs. The drifter
in the best possible area in relation to the drill, feed and is designed to operate in the 3-1/2" to 6" hole size
boom location. range.
prices of other sizes upon request
89 D & L THOMAS EQUIPMENT CORP.
 Custom Rock Drill Repairs
Specializing in
Gardner-Denver, Joy-Sullivan,
Ingersoll Rand, Atlas Copco, Chicago Pneumatic,
Toyo, Worthington, Etc.
Try Us With Your Next Hammer

New and Used Parts For All Makes and Models

Call Us For Price and Availability
Air Tubes
Gardner Denver
Air tubes. All the PR55 1PR55127A
popular sizes. Oth- PR66 1 PR6627
ers upon request. PR80 1 PR8027A
Please specify air PR123 PR123J27P
tube size required.
Ingersoll Rand
VL120 50646967
VL130 51054831
VL140 50646967
VL671 50895416
URD475 50646967
Joy-Sullivan
VCR150 005010990115
VCR260 031390250079
VCR261 031390250091
VCR280 01139025 0071P
VCR350 005010990185
VCR360 031390250086
VCR361 031390250075

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 90
 Blasthole Drills
SK-4di
*RE£M1LL, INC. INFINIT* semes

Crawler Mounted Blast Hole Drill

HOLE DIAMETER
THE SK-25 SERIES THE SK-35 SERIES 5"-7-7/8"..................................................... (127-200 mm)
The rugged SK-25 is a crawler The rugged SK-35 is a carrier mounted
mounted blasthole rig specifically de- blasthole rig specifically designed to POWER UNIT
signed to accommodate either down accommodate either down the hole Cummins NTA-855P-400
Rated Horsepower .............................. 400 h.p. (298 kW)
the hole hammer drilling or rotary drill- hammer drilling or rotary drilling. Ham- Rated Speed...................................................... 2100 rpm
ing. Hammer drilling hole sizes range mer drilling hole sizes range from 5 in.
from 5 in. to 7 in. (12.70 cm to 17.78 to 9 in. (12.70 cm to 22.86 cm) while COMPRESSOR
cm) while rotary drilling hole sizes rotary drilling hole sizes range from 6- 750CFM@125psi
21 m3/min at 8.5 bar.
range from 5 in. to 6-3/4 in. (12.70 cm 3/4 in. to 9 in. (17.20 cm to 22.86 cm).
to 17.2cm). The SK-35 is ideal for drilling overbur- ROTATION SYSTEM
The SK-25 is ideal for drilling over-bur- den, and mining coal, base metals or Speed ........................................................... 0 to 140 rpm
den and mining coal or in the quarry precious metals and in the quarry mar- Torque............................................................ 7050 ft.-lbs.
industry where a rugged machine is re- kets where travel over longer distances LEVELING JACKS
quired for larger hole sizes. are required. Stroke each .............................................. 48" (1219 mm)
Pad Diameter............................................... 24"(610 mm)
Qty. - 4

FEED SYSTEM
Down Pressure ............................40,000 Ibs. (18,182 kg)
Hoist Capacity .............................40,000 Ibs. (18,182 kg)
Feed Rate .................................... 125ft./min. (38m/min.)
Hoist Rate .................................... 125 ft./min. (38m/min.)
Stroke ...........................................................28' 8" (8.7 ?)

OTHER BLASTHOLE DRILLS

SK40J SK45J SK50J SK55J SK70J
Bit Hole Diameter 5-7-7/8" 6-9" 6-3/4"-9-7/8" 6-3/4"- 10-5/8" 7-7/8"- 12- 1/4"
Depth Capacity-Single 175' 175' 150' 180' 175'
Hoist/Pulldown Ibs. 40,000 Ibs. 45,000 Ibs. 50,00 Ibs. 55,000 Ibs. 21, 000/70,000 Ibs.
Drill Power System Cumm. NTA 855 Cumm. NTA 855 Cumm. NTA 855 Cumm. KTA19 Cumm. KTA19
Air Compressor Sullair 750/1 50 Sullair 900/1 50 Sullair 1050/1 25 Sullair 1250/1 00 Sullair 1250/1 25
Length Mast Up 30' 30' 30' 30' 27'
Length Mast Down 40.5' 40.5' 40.5' 40.5' 45'
Operating Weight 90,000 Ibs. 95,000 Ibs. 98,000 Ibs. 11 0,500 Ibs. 137,500 Ibs.

prices of other sizes upon request

91 D & L THOMAS EQUIPMENT CORP.
 USED EQUIPMENT AVAILABLE
Air Compressors - Air & Hydraulic Drills - Water Well Rigs; etc.
All makes, sizes, shapes and configurations.

Most units, ready to work - others are parts machines which have
many obsolete or hard to find parts.

We want to put your equipment back in working condition or to

provide good used equipment.

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 92
 ATTACHMENTS
guest industries. inc. FOR
BACKHOES & LOADERS

SNOW PLOWS FOR LOADERS BUCKET MOUNTED ASPHALT CUTTERS

Model No.: Model No.:
SP5 16
SP6 18
SP7 1600S
SP8
SP10
SP12

Plows manually clamp onto bucket lip in about 2

minutes and lock to prevent loosening. Mold- Cutter manually clamps onto lip of backhoe or
board can be positioned straight or 30° to either loader buckets in less than 2 minutes. Cutting is
side. fast, neat, dustless and noiseless.

TOP MOUNTED LOADER FORKS LIP MOUNTED LOADER FORKS

Model No.: Model No.: Model No.:
20 100 1000
40S 150 2000
40L 250 3500
SOB 4000S
60C 4000B
70S 8000S
70L 8000B
A quick-mount design allows operator to attach Forks manually clamp over bucket lip in about 1
or remove forks without tools or assistance in less minute. No alterations of the bucket are required.
than a minute. Sizes to 25,000 Ibs. capacity. Sizes to 8,000 Ibs. capacity.
LOADER ARM MOUNTED FORKS FOLD-AWAY LOADER FORKS
Model No.: Model No.:
L1000A FA-10
L3000A
L5000A
L8000A
L12000A
L18000A
Forks mounted in place of bucket are custom made Forks are attached inside bucket and fold up
to fit loader. Standard models have adjustable tine against top of bucket when not in use. Light-
spacing and are made to 16,000 Ibs. capacity. weight and compact design. 10,000 Ibs. capy.

BACKHOE MOUNTED AIR HAMMER BUCKET MOUNTED BLADES

Model No.: Model No.:
125 4
6

Requires only 125 CFM compressor. Mounts di- Manually clamp onto backhoe buckets with teeth
rectly on dipper or, with optional Grip, can be in about 1 minute. Fits buckets from 12" to 36".
mounted on bucket in about 2 minutes. 4 and 6 ft. lengths.

prices of other sizes upon request

93 D & L THOMAS EQUIPMENT CORP.
 ROCK
DRILLS
WD50 USA MANUFACTURED
DISTRIBUTION WORLDWIDE

FOUNDATION DRILL
PCF4 Hydraulic Chain Feed
w/up to 3500 Ibs. of push & pull
Uses up to 5' long drill pipe
RDS528H Rotary Drive
1550 Ibs.-ft. @ 2000 psi
0-600 RPM capacity
20HP Electric Motor
Runs off 220/440 volt

2-Wheel Drive capability for up to 20° grade

Rear stabilizer for stability when drilling

Foam-filled tires and tire chains standard

DTH, rotary, auger and core drilling options

Trams through any standard

doorway.
Width of machine is a mere
28 inches. Extends to 40 inches.

Great for operating inside and outside of homes, buildings and mines.
prices of other sizes upon request
D & L THOMAS EQUIPMENT CORP. 94
HBM ROCK
DRILLS
BACKHOE USA MANUFACTURED
MOUNTS DISTRIBUTION WORLDWIDE

STANDARD FEATURES AND SPECIFICATIONS

• Attaches in 30 minutes
• Operates off the hydraulics of your backhoe
• Drills from 1 1/4" to 3" holes
• Drills up to 12" holes with RDS528H Rotary Head and DTH Hammer
• HCF10 patented feed systems for drilling with standard 10' Drill Steel
• 30GPM @ 2250 psi
• 90CFM @ 100 psi flushing air required
• Water flushing option available

Mounts on:

Case 580-590 Backhoes

Caterpillar 416, 426, 436,
and 446 Backhoes
John Deere 210, 310, 410,
and 510 Backhoes
JCB 214, 215, and 217
Backhoes
Drott Excavators
Log Skidders
Truck Mountings Available
and more!!

Capable of drilling as fast as two air tracks or

six hand held drills
prices of other sizes upon request
95 D & L THOMAS EQUIPMENT CORP.
 AIR SAWS

j, , , ,, Accepts l^'-H* bkife, * Social fcamife sksip

Wade gsjarf allows fitte ^
posjtk>aing for a range of \
mnm% angles.

ftege adapter provides for

fast, effiefcm bbde,
and snow efaiges.

Wet Cutting Diamond Blades

Premium Blades
(Higher Concentration)

Applications
Cured Concrete
C-02P - Hard rock with non-abrasive sand.
C-06P - Hard aggregate such as river gravel or flint.
C-08P - Granite or other similar medium hard aggre-
gate.
C-10P - Limestone or slag aggregate.

Cured Concrete
with Asphalt Overlay
C-20P - Hard aggregate or greater % of concrete
than asphalt.
C-40P - Soft to medium aggregate or greater % as-
phalt than concrete. P-60 Walk-Behind Saw
Green Concrete • Use indoors or out - no engine exhaust
C-20P - Hard aggregate with non-abrasive sand. pollutants
C-40P - Hard river gravel aggregate. General pur- • Lightweight - only 50 pounds plus blade
pose blade for low horsepower saws. • Cuts dry - specifically designed for dry blades
C-60P - Hard aggregate with sharp abrasive sand. • Direct Drive - for maximum power, no belts, pulleys or chains to drain horsepower or break
C-68P - Medium to hard aggregate with sharp sand. • 5250 RPM working speed - the best RPM for dry cutting blades - increases blade life and
Long life general purpose blade. speed of cut
C-70P - Limestone or other soft abrasive aggre- • Air Power - 90 CFM @ 100 PSI
gates. • Designed for use with 12" or 14" dry cutting blades
• Dead man type hand throttle - safe and reliable
Asphalt • Adjustable cutting depth - up to 4" with 14" blade
C-40P - Hard non-abrasive aggregate such as gravel • Dust suppressor - an atomizer sprays water, keeping dust to a minimum
or flint. • Automatic oiler in handle
C-60P - Hard aggregate such as pea gravel. • Detachable handle - easy to transport - saw fits in car trunk
C-68P - Medium to hard aggregate with natural sand. • Arbor: standard 1"
General purpose blade. • Air inlet size 1/2" NPT female
C-70P - Soft aggregate such as limestone with abra- • Air hose: 3/4"
sive sand. • Minimal maintenance schedule - economical operation and long life

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 96
 Concrete Saws
CONCRETE SAWS MK-2016 SERIES
MK-3500/6500 SERIES

Specifications
Model No.: MK-2016K MK-2075E3 MK-2016H
Specifications Engine/Motor: Kohler Command Electric Honda V-Twin
Model No.: MK-3500-18 MK-6500-18 w/ electronic start 208-230/460V GX620 with electric
Engine/Motor: Wisconsin Wisconsin and oil alert 3 phase start and oil alert
W4-1770 W4-1770 Horsepower: 20 h.p. 7-1/2 h.p. 20 h.p.
Horsepower: 35 h.p. 65 h.p. Fuel Capacity: 2 gallons n/a 2 gallons
Fuel Capacity: 6 gallons 9 gallons Guard: 16' 16' 16'
Blade Capacity: 18" 18" Weight: 385 Ibs. 365 Ibs. 385 Ibs. J
Depth of Cut: 6-5/8" w/1 8" blade 6-5/8" w/1 8" blade Part No.: 153720 151787 153966 J|
Travel Speed: 2007min. forward 2007min. forward
1807min. reverse 180'/min. reverse
Weight: 950 Ibs. 1320 Ibs. Transmission: Heavy-duty hydro static variable speed drive
Size: 43"L x 30"W x 42"H 50"Lx36"Wx56"H Blade Shaft: 1-1/4" diameter with two self-aligning bearings
Part No.: 152636 152639 Belts: Three high performance cog belts
Depth Feed: Positive ball bearings screw feed with hand crank
Blade Capacity: 12" thru 16"
Optional Items: Factory Installed Depth of Cut: 6" with 16" blade
Water Pump: P/N: 152637 P/N: 152640 Travel Speed: Forward 0-80'/min.
Lifting Bale: P/N: 152648 Lifting Bale: Included
26" Blade Guard: P/N: 152638 P/N: 152638
Dry Cutting
30" Blade Guard: P/N: 152642 Optional Items: Factory Installed Blades
36" Blade Guard P/N: 152643 20" Blade Guard: P/N:154060
Every MK Diamond
dry cutting blade is
manufactured with
MK-9000 SERIES the latest technology
available. They are
Specifications engineered to have a
Model No.: MK-9816H MK-9136H MK-9816W MK-9116W superior cutting edge
Engine: Honda Honda Wisconsin/Robin Wisconsin/Robin over other blades plus
Horsepower: 8 h.p. 13 h.p. 7-1/2 h.p. 11 h.p. a longer life.
Weight: 207 Ibs. 238 Ibs. 206 Ibs. 228 Ibs.
Part No.: 150825 150826 150654 150656 On concrete or as-
phalt, your saw will
Specifications operate at peak effi-
Model No.: MK-9916VG MK-9146VG MK-9516E1 MK-9516E3 ciency and a consis-
Engine: B & S Vanguard B & S Vanguard Electric Electric tent cutting speed.
Single Phase, Three Phase, A/C
A/C 60Hz, 230V 60Hz, 240/460V
Horsepower: 9 h.p. 14 h.p. 5 h.p. 5 h.p.
Weight: 211 Ibs. 243 Ibs. 150 Ibs. 150 Ibs.
Part No.: 152575 152572 150936 150934

MK-455D Cured Concrete

Diameter Width Part No.
12" (300mm) .110 152634
WET CUTTING CONCRETE BLADES 14" (350mm) .110 152635
16" (400mm) .125 153105

Maximum Performance
MK-7501 Cured Concrete, MK-465D Standard-Asphalt/Green
Hard aggregate, non-abrasive sand Diameter Width Part No.
12" (300mm) .125 150617
MK-7502 Cured Concrete, 14" (350mm) .125 150618
16" (400mm) .125 154064
Medium/hard aggregate

MK-7503 Cured Concrete,

Soft aggregate, abrasive sand MK-485D Premium-Asphalt/Green
Diameter Width Part No.
CONCRETE MK-7601W Green Concrete 12" (300mm) .125 150619
BLADES Hard aggregate, non-abrasive sand 14" (350mm) .125 150620
16" (400mm) .125 153377
MK-7602W Green Concrete
Wet Cutting Blades Medium/hard aggregate
*AII dry cutting blades are for use on saws up to
Every MK Diamond 20 h.p.
MK-7603W Green Concrete
blade is manufactured to Soft aggregate
meet and exceed the
highest industry stan-
MK-7625W Asphalt over concrete with
dards. The quality of
these wet cutting dia- Medium/hard aggregate
mond blades is guaran-
teed for superior perfor- MK7710W General Purpose asphalt sawing
mance and a long, pro-
ductive life.

prices of other sizes upon request

97 D & L THOMAS EQUIPMENT CORP.
 HYDRACUTTER C150 AND ACCESSORIES

HydraCutterC150 TM
Product Code: 00808
Includes:
• Hydraulic Head with Auto Shutoff
of water and cutting operation
• Chain with 38 Diamond Segments
(Choice of: SL-10, SL-20, SL-30)
(SL-20 chain will be shipped unless otherwise specified)
Bar with 15 in. cutting length
Nose Sprocket Kit
Drive Sprocket with 18-tooth Spur
Trantorque® Shaft Adaptor
Water Pressure Gauge
Wall Walker Attachment

HydraCutter C150 Chains

Product Code Model Description
70352 SL-10 Diamond-Segmented Chain-
For cutting very hard aggregate with heavy steel reinforcing
70361 SL-20 Diamond Segmented Chain-
For cutting medium / medium hard aggregate with light steel reinforcing
70366 SL-30 Diamond Segmented Chain-
For cutting soft / medium soft aggregate and abrasive concrete
70374 SL-40 Diamond Segmented Chain-
For cutting green concrete, masonry brick, concrete block
70360 SJ-40 Diamond Segmented Chain-
3/8 in. width wide-slot cutting
For cutting green concrete, masonry brick, concrete block

HYDRAULIC POWER UNITS

All gasoline powered units are equipped with Oil Coolers, Electric Start, Hydraulic Reservoir, Lifting Eye and Briggs and Stratton Engines.
Other Engines are Available on Special Order. Consult Factory for Price and Availability. Cart Mounted Units include 16 in. Pneumatic Tires.

HydraPaks with Gasoline Engine Series 7000

Product Code Model Description Weight
00440 H-118 11 hp with 8 gpm Output at 2000 psi 240 Ibs.
maximum, Cart Mounted
00436 H-1158 1 1 hp with 5 or 8 gpm Output at 2000 psi 245 LBS.
maximum, Cart Mounted

HydraPaks with Vanguard Engine Series sooo

Product Code Model Description Weight
00449 HR Series 9 hp Vanguard with Pull Start, 220 Ibs.
with 6 gpm Output at 2000 psi Maximum
(Wheel Kit optional)

04759 Wheel Kit for HR Series Power Unit 25 Ibs.

43004 HV168 16 hp Vanguard with 8 gpm Output 275 Ibs.
at 2500 psi maximum, Cart Mounted
43003 HV1658 16 hp Vanguard with 5 or 8 gpm Output 280 LBS.
at 2500 psi maximum, Cart Mounted
08267 Auxiliary Water Pump
with Mounting Bracket for 16hp models
44200 HV1810 18hp Vanguard with 10 gpm Output 295 LBS.
at 2500 psi maximum, Cart Mounted

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 98
 CONCRETE CUTTING TOOLS & ACCESSORIES

HydraSaws Series 3500

Product Code Model Description Weight
00480 S - 1 4 14 in. Saw • Guard • Wet Cutting Port 21 Ibs.
Hose Whips
(Hydraulic requirements: 8 gpm/2000 psi)
00497 Guide Depth and Stabilizing Guide for S-14 only
00482 S-20H 20 in. Saw • Guard • Wet Cutting Port 37 Ibs.
• Hose Whips including Drain Line
• Heavy Duty Hydraulic Motor
(Hydraulic requirements: 8 gpm / 2500 psi)

00484 S-24H 24 in. Saw • Guard • Wet Cutting Port 41 Ibs.

• Hose Whips including Drain Line
• Heavy Duty Hydraulic Motor
(Hydraulic requirements: 8 gpm / 2500 psi)
79202 Pilemaster 14 in. Saw • Guard • Hose Whips 22 Ibs.
00792 Pilemaster 14 in. Saw • Guard • 25 ft. hose 42 Ibs.
00485 Valve For HydraSaw 2 Ibs.
Wet Cutting Attachment
* Abrasive or diamond blade available as an option. Consult factory.

HydraCarts
Product Code Description Weight
00489 SawCart-for light duty straight line cutting 60 Ibs.
(Accommodates 14 in. saw only)

00483 HydraCart-for slab sawing 140 Ibs.

(Accommodates 14 in., 20 in., 24 in. HydraSaws)

00478 Ballast Box 60 Ibs.

(Recommended when using 20 in. and 24 in. HydraSaws)

Hydraulic Core Drills

Product Code Description Weight
915000 Hydraulic Core Drill, for 1 to 5 inch Bits* 40 Ibs.
Includes: Hydraulic Motor • Pillow Block • Carriage
• Hose Whips • Variable Speed Control • M-1 Stand
915001 Hydraulic Core Drill for 6 to 16 inch Bits* 50 Ibs.
Includes: Hydraulic Motor • Pillow Block • Carriage
• Hose Whips • Variable Speed Control • M-2 Stand
915002 Hydraulic Core Drill for 18 to 24 inch Bits* 50 Ibs.
Includes: Hydraulic Motor • Pillow Block • Carriage
• Hose Whips with Spacers • Variable Speed Control
• M-2 Stand
*Core Bits optional. Consult factory.

THE HYDRAULIC PEOPLE

prices of other sizes upon request

99 D & L THOMAS EQUIPMENT CORP.
 IF YOU DRILL OR SAW WE CAN HELP
Diamond Bits Drilling Machines
Impregnated M-1 for Average Drilling
Segmented M-2 for Heavy Drilling
Continuous Rim M-3 for Light Drilling
Step Type Recirculating Drilling Units
Surface Set Hydraulic Drilling Units
Retractable Bits Air Driven Units
4" Diamond Cup Grinders

If your drilling or sawing requirements are unusual let us know and we will recommend and design
a system for you.

Diamond Saw Blades Accessories

Cured Concrete Extensions
Green Concrete Threaded Barrels and Caps
Asphalt Step Bits
Masonry Bit and Blade Measuring
Refractory Systems
Dry Turbo Water Swivels
Dry Segmented Trap Rings
Wet & Dry Tile Blades
10" Grinding Heads

Ask For Product Catalogs

Slab Saws and Wall Saws available, and numerous Drill Motors to choose from.

Specialists in Systems Design

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 100
^REVERSIBLE PLATE COMPACTORS

Superior compaction, any way you go.

Forward. Reverse. On the spot. In any direction, Stone reversible plate compactors win.
Eight models, including gas diesel options, provide the most complete selection for all
soil conditions and job site applications. Working ranges include lightweight and heavy-
weight models. The RP550 series weighs in at 214 Ibs. and delivers a force of 5100#. The
heaviest RP1100 series offers a hefty 924 Ibs. and packs a 11240# punch.

Dual eccentric system, low center of gravity

Adjustable flip-up locking handle for easy operation, transportation and storage.
Infinitely variable speed range for faster compacting and more operator control.
Infinite adjustment of eccentric allows "on-the-spot" vibration.

Model RP550G RP550D RP650G RP650D RP760G RP760D RP1100D

Centrifugal Force 5100# 5100# 6520# 6520# 7640# 7640# 11,240#
Plate Size (W x L) 17"x22" 17"x22" 20" x 28" 20" x 28" *18"x35" 18"x35" *22"x37"
Machine Size (L x W x H) 48 x 1 7 x 35 48 x 1 7 x 35 54 x 20 x 38 54 x 20 x 38 67 x 18x40 67 x 1 8 x 4 0 70 x 22 x 45
Power 5hp Honda 4.2hp Yanmar 9hp Honda 7hp Hatz Supra llhp Honda 7hp Hatz 13hp Hatz**
4.6hp Robin
Operating Weight 214# 230# 418# 462# 704# 761 # 924#
Max. Productivity (sq. ft./hr.) 6800 6800 7000 7000 5900 5900 7150
Max. Travel Speed (for. & rev.) 80ft./min. 80 ft./min, 70 ft./min. 70 ft./min. 65 ft./min. 65 ft./min. 65 ft./min.
Vibration Frequency 5000 RPM 5000 RPM 5100 RPM 5100 RPM 3480 RPM 3480 RPM 3300 RPM
Max. Depth Comp. 14" 14" 18" 18" 28" 28" 32"
Transmission Mechanical Mechanical Hydrostatic Hydrostatic Hydrostatic Hydrostatic Hydrostatic
OPTIONS: *width extensions available, consult factory **electric start standard
Paving Stone Mat for Models RP550, RP650

prices of other sizes upon request

101 D & L THOMAS EQUIPMENT CORP.
 one PLATE COMPACTORS!
AMERICAN VALUE BY DESIGN
Handle Retaining
Bracket — keeps the Corrosion- Built-in Lift
handle upright for Resistant Water Eye - ensures
easy storage and Tank — 6 qt. easy lifting.
transport, polyethlene tank
won't ever rust. Heavy-Duty
Captivated cap Centrifugal
One-Piece won't get lost
Base Plate - Clutch — single-
either piece design
dual purpose
integrated delivers greater
base plate/- reliability.
Four Lifting
eccentric
housing Handles —
make it easy Dual Stage Shock
dissipates
for operators Mounts — provide
internal heat
to pick up superior vibration
over entire
and move isolation to both
plate for plate.
cooling the oil the operator as
while heating well as the engine
So good they're patented. the plate for less fatigue,
less downtime.
surface for
Seven models to choose from, asphalt jobs.
to smash granular soil gravel Exclusive Premium
and asphalt with 3,000 to Compaction Belt
Forward-
6,900 pounds of force ... to Mounted
— provides more
efficient power
blast forward at 75 feet to 130 Eccentric — Ramped
Leading Edge
transfer from
results in an
feet per minute ... to tame exceptional — 15° ramp
engine to
eccentric,
7,000 to 15,000 square feet fast forward gently climbs
onto uncom-
Self-Cleaning
Base Plate —
travel speed
per hour! No wonder our that increases pacted eliminates
plates are the first choice with productivity. surface
assuring even,
rock and dirt-
build-up for
Patented Offset
Eccentric Sheave —
rental houses as well as progressive easier eliminates belt stress
contractors, compaction, maintenance, for extended belt life.

MODEL S-28 S-28A S-38 S-38A S-52T S-52 S-66

CIMA* Rated 3000# 3000# 4000# 4000# 5100# 5100# 6900#
Eccentric Force
Plate Size (W x L) 1 9" x 24" 19"x24" 20" x 24" 20" x 24" 14"x24" 21"x24" 23" x 28"
Max. Productivity 7,125 7,125 10,000 10,000 9,100 13,650 15,000
(sq.ft./hr.)
Water System No Yes No Yes No No No
Max. Lift 10" 10" 12" 12" 15" 14" 20"
Maximum 75'/min. 75ymin. lOO'/min. lOO'/min. 130'/min, 130'/min. 90'/min.
Forward Travel
Transport Optional Optional Optional Optional Optional Optional Optional
Wheels
Vibration 5800 5800 5400 5400 5400 5400 4500
Frequency
5hp.Briggsl/Ct 5hp. Briggsl/Ct 5 hp. Briggsl/Ct 5 hp. Briggsl/Ct 5 hp. Briggsl/Ct 5hp. Briggsl/Ct
Power 4.6hp. Robin 4.6 hp. Robin 4.6 hp. Robin 4.6hp. Robin 4.6hp. Robin 4.6 hp. Robin 7.5hp. Robin
5 hp. Honda 5hp. Honda 5 hp. Honda 5 hp. Honda 5 hp. Honda 5hp. Honda 8 hp. Honda
4.2 Yanmar Diesel 4.2 Yanmar Diesel 4.2 Yanmar Diesel
Operating 150# 160# 180# 190# 170# 220# 330#
Weight
Granular soil Granular soil Granular & Granular & Trench, Curb & Large jobs Large jobs
Applications backfill backfill, mixed soil mixed soil Gutter work for variety for variety
Asphalt backfill backfill, Asphalt of backfill of backfill
* CONSTRUCTION INDUSTRY MANUFACTURERS ASSOCIATION Kohler available upon special request. Consult factory
t30209 Low-oil guard kit is available for I/C engine only. Dealer Installs.

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 102
 ! POWER TROWELS one,
MODEL CF-364: All Purpose Troweling
Machine
• Exclusive Dyna-Clutch® stops blade rotation but
not the engine
• Locking T-handle with variable speed throttle
control
• Adjustable body contoured handle
• Lifting eye — standard
• Large choice of engine options
• Rotating stabilizing ring — standard (extra on
most competitor's models)
• Blade leveler adjustment
• Shipped assembled with either finish or
combination blades
• Available with either 3 or 4 blades
• New! Two year warranty on gearcase

Power Blade Blade styles and sizes available Operating

Model Blades Diameter Options RPM Finish Combination Float Weight
3hp Briggs 130lb.
CF-304 4 30" 5hp Briggs 50-130 6" x 1 1 " 8" x 1 1 " 10" x 11" 145lb.
*5hp Briggs I/C 145lb.
5.5hp Honda 150lb.
5hp Briggs 160lb.
*5hp Briggs I/C 160lb.
CF-363 3 7hp Briggs I/C 175lb.
36" 5.5hp Honda/oil alert 50-130 6"xl4" 8"xl4" 10" x 14" 165lb.
CF-364 4 8hp Honda/oil alert 180lb.
4.6hp Robin 175lb.
7.5hp Robin 185lb.
5hp Briggs 180lb.
*5hp Briggs I/C 180lb.
CF-463 3 7hp Briggs I/C 205 Ib.
46" 5.5hp Honda/oil alert 50-130 6" x 18" 8"xl8" 10" x 18" 185lb.
CF-464 4 8hp Honda/oil alert 200 Ib.
7.5hp Robin 210 Ib.
7hp Wisconsin 225 Ib.
HDP-484 4 48" llhp Robin 80-170 6"xl8" 8" x 1 8" 10"xl8" 325 Ib.
llhp Honda/oil alert 300 Ib.

Trowels manufactured under U.S. Patent 4046483. Others pending.

*Low oil guard kit is available for I/C engine only. Dealer installs. Part #30209

prices of other sizes upon request

103 D & L THOMAS EQUIPMENT CORP.
Resharpening
and Maintenance
of Button Bits
Why sharpen? How to sharpen ing can occur on the buttons. Grind it
Regular Sharpening is essential button Sharpening Kenroc button bits is not smooth to avoid possible button failure.
bit maintenance. Kenroc button bits are difficult. The purpose is to return the Remember:
designed for fast penetration, and keep- carbide buttons to their original spheri- 1. check button wear regularly
ing them sharp has a direct effect on cal shape. Here's how to do it: 2. sharpen before buttons are overrun
both penetration rate and bit life. 1. Use a small hand grinder that op- 3. check face button wear and
As button bits wear, they develop flats erates at 20,000 to 25,000 rpm. chipways.
on the tungsten carbide buttons. Flats Caution: wear approved eye protec- It's as easy as one, two, three.
inhibit rock shattering power and force tion.
Cleaning
the bits (and your equipment) to work 2. Select a vitrified grinding wheel
harder to get the job done. Flats also about 1" in diamteter and 1 /2" to 1" Remember, insufficient chip removal
greatly increase stress on the buttons, width. during drilling may indicate obstruction
the most frequent cause of premature 3. Working from the center of the flat, of flushing holes. To remove blockage,
button breakage and failure. Simple but roll the wheel down the side of the disassemble drill string and clean with
regular bit sharpening can minimize button, removing the edge. Con- an appropriate tool. To avoid damage,
these problems. tinue this procedure all the way do not pound or hammer on drill string
around the button until it is once components.
When to sharpen again domed or ball shaped.
On the average, you can expect to 4. When finished, the button will be flat original shape

sharpen Kenroc button bits about 1/4 spherical, and slightly smaller than
as often as bladed bits. That is, a but- when new.
ton bit should run about 4 times longer
than a bladed bit before sharpening is Face buttons and chipways
required. The need for button bit sharp- While face buttons wear slower than
ening is easily detected by checking the gauge buttons, they should also be
size of the flats on the gauge buttons. sharpened at regular intervals. Flats
Buttons that are cutting gauge will usu- on the face buttons wear at an angle,
ally show the most wear and are instru- depending upon button location.
sharpen to spherical shape
mental in determining the life of the bit. Sharpen them the same as you would
Thus, you should first check the size of gauge buttons, and return them to their
the flats developing on the gauge but- original spherical shape.
tons. Use the rule-of-thumb guide Chipways are also important to bit
shown in diagram. Drilling with a but- performance. As a matter of practice,
ton bit beyond these wear limits will lead include the cleaning of chipways in your
to decreased penetration rates and bit regular bit sharpening program. Grind
failure. Other factors you should con- away sharp edges, and enlarge the
sider are: abrasiveness of the rock, passages if they have become worn.
down pressure, and rotation speed, Quick chip removal improves bit per-
drilling experience will tell you that the formance.
harder you work a bit, the more often Proper sharpening will help you get
you should check for button wear. the most out of Kenroc button bits, and
After a while, you will be able to de- will go a long way towards preventing in soft rock,
velop a regular sharpening schedule premature bit failure. If a button should flats are 1/4"
based on the amount of footage drilled be broken off, the bit is still usable.
It's time in medium rock,
and the types of rock you are working Grind the button flush with the body and
to sharpen
in. Regular inspection and regular put the bit back into service. flats are 3/16"
when:
sharpening add up to maximum button Another thing to check is thermal
in hard rock,
bit life. cracking of the carbide. In certain rock
flats are 1/8"
conditions, a "snakeskin" - like crack-

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 104
 Resharpening
and Maintenance
of Four-Point Bits
Selection of grinding wheels steel breakage is increasing.
Kenroc four-point bits are designed and Gauge wear
constructed to facilitate resharpening.
Gauge wear is the gradual rounding of
Use an adequate grinding wheel of vit-
the carbide insert corners...which con-
rified bonded silicon carbide. Since
sequently reduces the gauge of the bit.
both the carbide and steel of the bit are
This usually occurs from drilling in rock
to be ground at the same time, it is im-
with a high quartzite content. As the
portant that hardness, grain, size, and When roof angle wear occurs in the
corner of the insert wears off, an "anti-
structure of the wheel be considered. form of crowning, concentrate grinding
taper" develops. This in turn causes
The grinding wheel should not be too around the centre hole. This will re-
abnormal stress when drilling and can
hard or too fine grained. Both of these duce the crown. Should crowning ever
cause bit or drill steel breakage. Ex-
conditions can cause steel particle clog- exceed 5°, the bit will not perform prop-
cessive gauge wear also hinders pen-
ging on the wheel and overheat the erly.
etration rate.
carbide insert. Grinding cracks may
then form in the insert and increase the Cleaning
chance for breakage.
Remember, insufficient chip removal
Wheels which are very coarse
during drilling may indicate obstruction
grained may also leave scratches on
of flushing holes. To remove blockage,
the carbide inserts and thus potential
disassemble drill string and clean with
breaking points. Choose a wheel to suit
an appropriate tool. To avoid damage,
the rpm of the grinder. Your wheel sup- When sharpening has been com-
do not pound or hammer on drill string
plier can recommend the best wheel for pleted, two things should be checked
your operation. components.
to assure accuracy. First, the carbide
Wear approved eye protection when inserts should all have the same height.
Roof angle sharpening
grinding. Unequal heights will mean unequal
Using a Kenroc template, measure the
Overdrilling width of roof angle wear on the carbide
Most often, two types of wear (roof insert cutting edge. If the width of the
angle and gauge) will occur simulta- flat on the cutting edge is 3/32" or
neously on Kenroc four-point bits. It is greater, (measured 3/16" in from the
important that the limits for both types insert's outer corner), the bit requires
of wear, explained later, are not passed. roof angle sharpening to restore its
Excessive wear from overdrilling places original cutting power.
stress on the individual inserts. And
a heavy strain on bits and drill string that increases the chance for breakage.
which may lead to breakage. Check Second, make sure the cutting edges
bits for wear frequently, because differ- are 110° and on the center line of the
ent rock conditions will produce differ- the insert.
ent bit wear rates. When they
are, use a
Roof angle wear silicon car-
Roof angle wear is the gradual flatten- bide whet-
ing of the carbide insert cutting edges. It is not necessary to sharpen the
entire length of the cutting edges. The stone or an
This occurs from drilling in granite, old grinding
gneiss, or other hard rock. When the outer corners of the carbide inserts
wear first, and grinding the bit down wheel to
edge flattens to a width of 3/32", mea- chamfer the
sured at the insert's outer corner, it is until they are sharpened will substan-
tially reduce bit life. Leave approxi- edge slightly.
time for resharpening. At this stage of If the carbide
wear, the bit is beginning to lose pen- mately 1/10 of the bit diameter
unsharpened at the outer edges of the cutting edge
etration rate, and the risk of bit or drill is too sharp
carbide inserts.

prices of other sizes upon request

105 D & L THOMAS EQUIPMENT CORP.
it can be chipped rather easily. Hon- Inspect and clean flushing holes if nec- tinuous drilling in soft rock, inadequate
ing the edge about 0.02" wide will help essary. water pressure, inadequate air pressue,
prevent this. Kenroc bits need not be or reduced rotation rate. In such cases,
scrapped if only one insert is damaged. the cuttings wear the steel away with-
Grind the fault until it is removed. out corresponding insert wear. This
problem can be solved by grinding the
Gauge sharpening bits in the same manner as square-
Using a Kenroc template, measure the worn bits. But be sure the protruding
anti-taper on the corner of the cutting areas of the insert are ground flush with
edges. If it has reached a height of the steel, or breakage will occur.
1/4" or more, gauge sharpening should
be performed. Hand sharpening
While special grinding machines should
be used for sharpening bits whenever
Check that the diameters of the cut- possible, larger bits can be sharpened
ting edges are each greater that the by hand. To facilitate handling, screw
diameter of the bit. If clearance is ad- the bit tightly onto a short rod, and
equate, measure the new edge diam- sharpen according to the preceding in-
eter and mark the bit for size identifica- structions. For bits over 2-1/4" diam-
tion. eter, grinding one insert at a time is rec-
ommended.

Grind the bit around its circumfer-

ence until the anti-taper is reduced.
The height of the bit may also have to
be further ground down.

Special Sharpening Methods

Thermal cracking
Drilling in certain rock formations, such
Should the bit wear to a square as magnetite, may cause "snakeskin" Correctly resharpened
shape, the corners of the carbide in- cracking on the carbide insert surface.
serts should be ground down until the
Kenroc bit
Such cracking weakens the impact A correctly sharpened Kenroc bit
original shape is restored. After grind- strength of the carbide and can lead to
ing, check to see that all inserts are should look like this. All inserts are level
breakage if not quickly corrected. Great and the same length. Cutting edge
equally long. care should be taken to grind off clearance is good, gauge is correct, and
Chipsways should be enlarged to "snakeskin" surfaces, and other cracks carbide inserts are free of cracks. Air
facilitate removal of cuttings. Grind the as well, until the smooth surface finish holes are clean and chipways are ad-
grooves to their original shape. of the insert is restored. equate. It will deliver the hard-hitting
When this type of wear pattern is fre- performance Kenroc bits are famous
quent, resharpening must also become for.
more frequent.

Side protrusion of inserts

Several things may cause side protru-
sion of the carbide inserts, e.g., con-

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 106
 Varying types of ground conditions require that individual designs be tested in
your particular area. Your local sales representative will be pleased to discuss
Threaded Bit
the advantages of each particular bit style.
Face Designs
BM - Mushroom Design BT - Flat Face Design DB - Drop Centre Design

"^J:±U^ X^ J^ ^uays
Retrac Guide

RE11
^ __^ £**\ Thread Diameter Part
K l\m In. Number
m WA m ^S -i .-1/4 rope thread 1 -3/4 44 175BB125RET 175BB125RGUIDE
^ 2 51 200BB125RET 200BB125RGUIDE

ROK • |m W • ^%
MMM m k^
2 14
"
2 _ 1/2
57
63
225BB125RET
250BB125RET
225BB125RGUIDE
250BB125RGUIDE
3 76 300BB125RET 300BB125RGUIDE
Flat Face and Drop C7*ntflrKlC*'i«"'g««
Available with \^ 225BB150RET 225BB150RGUIDE
__ ^^^ A 1-1/2 rope thread 2-1/4
2 1/2
Conical or
Ballistic Carbide ^"" • TnTY 3~
250BB150RET 250BB150RGUIDE

I III 76 300BB150RET 300BB150RGUIDE

Larger bit head
^v/ 7 " Jis 3 1/2 89 350BB150RET 350BB150RGUIDE
chip removal 4 102 400BB150RET 400BB150RGUIDE
/^V/^
38 thread 2 63 250BB38RET 200BB38GUIDE
—— 2-1/4
70 275BB38RET 225BB38GUIDE
extremities
keep the bit from 2-1/2 76 300BB38RET 250BB38GUIDE
rifling in the hole.
3 89 350BB38RET 300BB38GUIDE
3-1/2 102 400BB38RET 350BB38GUIDE

The cutting edge ^_ ^ ^^> 45 thread 3 76 300BB45RET 300BB45GUIDE

on the bottom
assists In the £-/?* . ^"L 3-1/289 350BB45RET 350BB45GUIDE
easy removal
from the hole. —~~"~ 4 102 400BB45RET 400BB45GUIDE
4-1/2 114 450BB45RET 450BB45GUIDE
5 127 500BB45RET 500BB45GUIDE
6 152 600BB45RET 600BB45GUIDE

Guicje DIIS JA E^ltO 51 thread

4
3-1/2
89
102
350BB45RET
400BB45RET
350BB51 GUIDE
400BB51 GUIDE
4-1/2 114 450BB45RET 450BB51 GUIDE
5 127 500BB45RET 500BB51 GUIDE
6 48 600BB45RET 600BB51 GUIDE

1700HLthread 3 76 300BB1700RET 300BB1700GUIDE

3-1/2 89 350BB1700RET 350BB1700GUIDE
FfcXtingjoornsI, <-'"'
****** 4 102 400BB1700RET 400BB1700GUIDE
41/2 114 450BB1700RET 450BB1700GUIDE

•I
13 127 500BB1700RET 500BB1700GUIDE

6 152 600BB1700RET 600BB1700GUIDE

2K1 7 thread 4 102 400BB2K17RET 400BB2K17GUIDE

4-1/2 114 450BB2K17RET 450BB2K17GUIDE
5 127 500BB2K17RET 500BB2K17GUIDE
6 152 600BB2K17RET 600BB2K17GUIDE

prices of other sizes upon request

107 D & L THOMAS EQUIPMENT CORP.
 Button Bits
Thread Diameter Part
In. mm Number
1 rope thread 1-1/2 38 150BB100R
1-5/8 41 163BB100R
1-3/4 44 175BB100R
1-7/8 48 188BB100R
2 51 200BB100R

1-1/4 rope thread 1-3/4 44 175BB125R

1-7/8 48 188BB125R
2 51 200BB125R
2-1/4 57 225BB125R
2-1/2 63 250BB125R

1-1/2 rope thread 2-1/2 63 250BB150R

2-3/4 70 275BB150R
3 76 300BB150R
3-1/2 89 350BB150R
4 102 400BB150R

1 -3/4 rope thread 3 76 300BB175R

2 rope thread 6 152 600BB200R

38 thread 2-1/2 63 250BB38

2-3/4 70 275BB38
3 76 300BB38
3-1/2 89 350BB38
4 102 400BB38

45 thread 3 76 300BB45
3-1/2 89 350BB45
4 102 400BB45
4-1/2 114 450BB45
5 127 500BB45

1 51 thread 3-1/2
4
89
102
350BB45
400BB45

O C 4-1/2
5
114
127
450BB45
500BB45

1 400 HL thread 1-7/8 48 188BB1400

2 51 200BB1400

1 600 HL thread 2-1/2 63 250BB1600

2-3/4 70 275BB1600
3 76 300BB1600
3-1/2 89 350BB1600
4 102 400BB1600

1 700 HL thread 3 76 300BB1700

3-1/2 89 350BB1700
4 102 400BB1700
4-1/2 114 450BB1700
5 127 500BB1700
5-1/2 140 550BB1700
6 152 600BB1700

1 800 HL thread 4 102 400BB1800

4-1/2 114 450BB1800

2000 HL thread 4 102 400BB2000

4-1/2 114 450BB2000
5 127 500BB2000

2K1 7 thread 4 102 400BB2K17

4-1/2 114 450BB2K17
5 127 500BB2K17
6 152 600BB2K17

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 108
 X Style Bits
Thread Diameter Part
In. mm Number
1 rope thread 1-1/2 38 150XB100R
1-5/8 41 163XB100R
1-3/4 44 175XB100R

1-1/4 rope thread 1-5/8 41 163XB125R

1-3/4 44 175XB125R
1-7/8 48 188XB125R
2 51 200XB125R
2-1/2 63 250XB125R
2-3/4 70 275XB125R
3 76 300XB125R

1-1/2 rope thread 2-1/2 63 250XB150R

2-3/4 70 275XB150R
3 76 300XB150R
3-1/2 89 350XB150R
4 102 400XB150R

1-3/4 rope thread 3 76 300XB175R

3-1/2 89 350XB175R
4 102 400XB175R

2 rope thread 4 102 400XB200R

4-1/2 114 450XB200R
5 127 500XB200R

38 thread 2-1/2 63 250XB38

2-3/4 70 275XB38
3 76 300XB38
3-1/2 89 350XB38
4 102 400XB38

45 thread 2-3/4 70 275XB45

3 76 300XB45
3-1/2 89 350XB45
4 102 400XB45

51 thread 4-1/2 114 450XB51

5 127 500XB51

1 200 HL thread 1-3/8 35 138XB1200

1-1/2 38 150XB1200
X - 75° Design 1-5/8 41 163XB1200
1-3/4 44 175XB1200
1-7/8 48 188XB1200
2 51 200XB1200
2-1/4 57 250XB1200

1 400 HL thread 1-5/8 41 163XB1400

1-3/4 44 175XB1400
1-7/8 48 188XB1400
2 51 200XB1400
2-1/4 57 225XB1400
2-1/2 63 250XB1400
3 76 300XB1400

1 600 HL thread 2-1/2 63 250XB1600

2-3/4 70 275XB1600
3 76 300XB1600
3-1/2 89 350XB1600
C - Cross Design 4 102 400XB1600

1 700 HL thread 2-3/4 70 275XB1700

3 76 300XB1700
3-1/2 89 350XB1700
4 102 400XB1700

2000 HL thread 4 102 400XB2000

4-1/2 114 450XB2000
5 127 500XB2000

1 -3/4 K1 7 thread 3-1/2 89 350XB175K17

4 102 400XB175K17

2K1 7 thread 4 102 400XB2K17

4-1/2 114 450XB2K17
5 127 500XB2K17

prices of other sizes upon request

109 D & L THOMAS EQUIPMENT CORP.
 Cross Style Bits
Thread Diameter Part
In. mm Number
D thread 1-7/8 48 188XBD
2 51 200XBD
2-1/8 54 213XBD
2-1/4 57 225XBD
2-7/16 62 244XBD
3 76 300XBD

H thread 1-3/8 34 138XBH

1-1/2 38 150XBH
1-5/8 41 163XBH
1-3/4 44 175XBH
1-7/8 48 188XBH
2 51 200XBH
2-1/4 57 225XBH
2-1/2 63 250XBH

Knock-off Blocks
Knock-off Blocks Part Number
7/8" Hex 88HRB
1" Hex 100HRB
7/8" Hex Reaming 88HR
Hex Reaming 100HR

Carbide Tapered Socket Bits

Steel Diameter Part
11° In. In. mm Number
7/8 1-3/8 35 1 -3/8BT1 1 -7/8
7/8 1-1/2 38 1-1/2BT1 1-7/8
7/8 1-5/8 41 1-5/8BT1 1-7/8
1 1-3/8 35 1-3/8BT11-1
1 1-1/2 38 1-1/2BT11-1
1 1-5/8 41 1-5/8BT11-1
1 1-3/4 44 1-3/4BT11-1

12°
7/8 1-1/4 32 1-1/4BT1 2-7/8
7/8 1-3/8 35 1-3/8BT12-78
7/8 1-1/2 38 1-1/2BT1 2-7/8
7/8 1-5/8 41 1-5/8BT1 2-7/8
7/8 1-3/4 44 1-3/4BT1 2-7/8
1 1-3/8 35 1-3/8BT12-1
1 1-1/2 38 1-1/2BT12-1
1 1-5/8 41 1-5/8BT12-1
1 1-3/4 44 1-3/4BT12-1

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 110
 Common Drill Steel Failures

Failure Type 1 - is characterized by a fatigue rose originating from the surface. It can occur on both
round and hex steels anywhere along the length of the rod.

Failure Type 2 - is characterized by a fatigue rose originating in the bore, and can occur anywhere
along the length of the rod.

Failure Type 3 - is typically a sudden failure, no fatigue rose being present, through the radius where
the threads meet the rod section (either round or hex.).

Failure Type 4 -
(a) - occurs where the coupling ends and is typically a sudden failure.
(b) - occurs about 1/3 the way into the threads and is associated with worn threads and
surface galling.
(c) - is a chip broken off the end of the drill steel.

CAUSE OF FAILURE MOST LIKELY REASON POSSIBLE REASON

Type 1 Surface damage caused by Galling against the side
hammering or careless use of the hole. Surface
of drill steels. defect in steel. Severe
overfeeding.
Type 2 Corrosion originating in Internal defect in steel,
bore, accelerated by e.g., an oxidized
high stress conditions. inclusion.
Type 3 Wandering or drifing Worn threads and/or
hole. Severe overfeeding coupling. Migrating
Misalignment of drill couplings (occurs when
feed. bridge wears out).
Type 4 (a) Severe overfeeding or Badly worn or migrating
other cause of heavy coupling.
sideloading, as in Type 3.
Type 4 (b) Worn threads. Fatigue Worn coupling (similar
through a surface stress to position 8 on the
raiser. striking bar).
Type 4 (c) Drill steels improperly Drill rod end broken or
joined in coupling (e.g., not cut off true.
worn or non-spec bridge
in coupling).

prices of other sizes upon request

111 D & L THOMAS EQUIPMENT CORP.
 Drill Steel

Thread L Round Steel Hex. Steel

Ft. M Part No. Part No.
1" Rope Thread Single 2 .78 02ST100R
4 1.22 04ST100R 04ST100RHEX
6 1.84 06ST100R 06ST100RHEX
8 2.44 08ST100R 08ST100RHEX
10 2.88 10ST100R 10ST100RHEX
12 3.32 12ST100R
14 4.27 14ST100R

1-1/4" Rope Thread Single 4 1.22 04ST125R 04ST125RHEX

6 1.84 06ST125R 06ST125RHEX
8 2.44 08ST125R 08ST125RHEX
10 3.05 10ST125R 10ST125RHEX
12 3.66 12ST125R
14 4.27 14ST125R

Long 4 1.22 04LT125R

6 1.84 06LT125R
8 2.44 08LT125R
10 3.05 10LT125R
12 3.66 12LT125R
14 4.27 14LT125R

Continuous 4 1.22 04CT125R

6 1.84 06CT125R
8 2.44 08CT125R
10 3.05 10CT125R
12 3.66 12CT125R
14 4.27 14CT125R

04ST150R
1-1/2" Rope Thread Single 8 2.44 08ST150R
10 3.05 10ST150R
12 3.66 12ST150R
14 4.27 14ST150R

Long 10 3.05 10LT150R

12 3.66 12LT150R
14 4.27 14LT150R

Continuous 10 3.05 10CT150R

12 3.66 12CT150R
14 4.27 14CT150R

38 Thread Single 8 2.44 08ST38

10 3.05 10ST38 10ST38HEX
12 3.66 12ST38 12ST38HEX
14 4.27 14ST38 14ST38HEX
16ST38HEX
Tandem 10 3.05 10TT38
12 3.66 12TT38
14 4.27 14TT38
Continuous 10 3.05 10CT38
12 3.66 12CT38
14 4.27 14CT38

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 112
 Drill Steel
Thread L Round Steel Hex. Steel
Ft. M Part No. Part No.
Single 10 3.05 1 OST45
45 Thread 12 3.66 12ST45
14 4.10 14ST45
20 6.10 20ST45

Tandem 10 3.05 1 OTT45

12 3.66 12TT45
14 4.10 14TT45
20 6.10 20TT45

Continuous 10 3.05 1 OCT45

12 3.66 12CT45
14 4.10 14CT45

Single 12 3.66 12ST51

51 Thread 20 6.10 20ST51

Single 10 3.05 10ST1600

1600 Thread 12 3.66 12ST1600

Single 10 3.05 10ST1700

1700 Thread 12 3.66 12ST1700

Single 10 3.05 10ST1800

1800 Thread 12 3.66 12ST1800

Long 10 3.05 10LT200K17

2K17 Thread 12 3.66 12LT200K17
20 6.10 20LT200K17

Continuous 20 6.10 20CT200K17

20 6.10 20CT200C17

Single 10 3.05 1 OST2000

2000 Thread 20 6.10 20ST2000

Reducing Steel

The following sizes of reducing steel are in stock. If you do not see the size you
are looking for, let us know your requirements and we will try to get it for you.

08LT125ST150
10LT100ST125
10LT125ST150
10ST125ST38
12ST1400ST1600
14ST1400ST1600
16ST125ST38

prices of other sizes upon request

113 D & L THOMAS EQUIPMENT CORP.
 Male-Female Speedrod

Ft. Part No.

1-1/4" Rope Thread M-F 4 1.22 04MF125R
5 1.63 05MF125R
6 1.84 06MF125R
8 2.44 08MF125R
10 3.05 10MF125R
12 3.66 12MF125R

38 Thread M-F 4 1.22 04MF38

5 1.63 05MF38
6 1.84 06MF38
10 3.05 10MF38
12 3.66 12MF38

45 Thread M-F 6 1.84 06MF45

8 2.44 08MF45
10 3.05 10MF45
12 3.66 12MF45
20 6.10 20MF45

51 Thread M-F 12 3.66 12MF51

20 6.10 20MF51

Hole Savers Hole Savers

Bell Type Spear Type
Thread Part Number Thread Part Number
1 " Rope 100RHSB 1 " Rope 100RHSS
1-1/4" Rope 125RHSB 1-1/4" Rope 125RHSS
1-1/2" Rope 150RHSB 1-1/2" Rope 150RHSS
1 -3/4" Rope 175RHSB 1 -3/4" Rope 175RHSS
2" Rope 200RHSB 2" Rope 200RHSS
38 38HSB 38 38HSS
45 45HSB 45 45HSS
2"C-17 2C17HSB 2"C-17 2C17HSS
1400 1400HSB 1400 1400HSS
1600 1600HSB 1600 1600HSS
1700 1700HSB 1700 1700HSS
1800 1800HSB 1800 1800HSS
2000 2000HSB 2000 2000HSS

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 114
 Shanked Rods
EH ^^--—-v_^-^_/-^v_ -—••»

1"hex 4-1/2" shank Part Number

Length
Ft. M 1"ROPE 1-1/4" ROPE 1-1/2" ROPE

1 .30 01HEXT100R 01HEXT125R 01HEXT150R

2 .61 02HEXT100R 02HEXT125R 02HEXT150R
3 .61 03HEXT100R 03HEXT125R 03HEXT150R
4 .61 04HEXT100R 04HEXT125R 04HEXT150R
5 1.2 05HEXT100R 05HEXT125R O5HEXT150R
6 1.2 06HEXT100R 06HEXT125R 06HEXT150R
8 1.2 08HEXT100R 08HEXT125R 08HEXT150R
10 1.8 10HEXT100R 10HEXT125R 10HEXT150R
12 1.8 12HEXT100R 12HEXT125R 12HEXT150R

Carbon Hollow Drill Steel

7/8" hex 3-1/4" shank

7/8" hex 4-1/4" shank 7/8" x 3-1/4" 7/8" x 4-1/4"
Length
Thread Ft. M. Part Number Part Number
H 1 .30 01HEX88HT325 01HEX88HT
H 1-1/2 .45 0150HEX88HT325 0150HEX88HT
H 2 .61 02HEX88HT325 02HEX88HT
H 3 .91 03HEX88HT325 03HEX88HT
H 4 1.2 04HEX88HT325 04HEX88HT
H 5 1.5 05HEX88HT325 05HEX88HT
H 6 1.8 06HEX88HT325 06HEX88HT
H 8 2.4 08HEX88HT325 08HEX88HT
H 10 3.0 10HEX88HT325 10HEX88HT

1"hex 4-1/4" shank

H 1 .30 01HEX100HT
H 1-1/2 .45 0150HEX100HT
H 2 .61 02HEX100HT
H 2-1/2 .76 0250HEX100HT
H 3 .91 03HEX100HT
H 4 1.2 04HEX100HT
H 5 1.5 05HEX100HT
H 6 1.8 06HEX100HT
H 8 2.4 08HEX100HT
H 10 3.0 10HEX100HT
H 12 3.7 12HEX100HT
H 14 4.3 14HEX100HT

D 2 .61 02HEX100DT
D 4 1.2 04HEX100DT
D 6 1.8 06HEX100DT

prices of other sizes upon request

115 D & L THOMAS EQUIPMENT CORP.
 Tapered Drill Steel

7/8" x 4-1/4" shank 1"x 4-1/4" shank

Length Under Collar Part Price Length Under Collar Part Price
Ft. M. Number Each Ft. M. Number Each
2 .6096 02HEX88T11 2 .6096 02HEX100T11
2-1/2 .7620 0250HEX88T11 2-1/2 .7620 0250HEX100T11
3 .9144 03HEX88T11 3 .9144 03HEX100T11
3-1/2 1.067 0350HEX88T11 3-1/2 1.067 0350HEX100T11
4 1.219 04HEX88T11 4 1.219 04HEX100T11
4-1/2 1.372 0450HEX88T11 4-1/2 1.372 0450HEX100T11
5 1.524 05HEX88T11 5 1.524 05HEX100T11
5-1/2 1.676 0550HEX88T11 5-1/2 1.676 0550HEX100T11
6 1.829 06HEX88T11 6 1.829 06HEX100T11
6-1/2 1.981 0650HEX88T11 6-1/2 1.981 0650HEX100T11
7 2.134 07HEX88T11 7 2.134 07HEX100T11
7-1/2 2.286 0750HEX88T11 7-1/2 2.286 0750HEX100T11
8 2.438 08HEX88T11 8 2.438 08HEX100T11
8-1/2 2.591 0850HEX88T11 8-1/2 2.591 0850HEX100T11
9 2.743 09HEX88T11 9 2.743 09HEX100T11
9-1/2 2.896 0950HEX88T11 9-1/2 2.896 0950HEX100T11
10 3.048 10HEX88T11 10 3.048 10HEX100T11
10-1/2 3.200 1050HEX88T11 10-1/2 3.200 1050HEX100T11
11 3.353 11HEX88T11 11 3.353 11HEX100T11
11-1/2 3.505 1150HEX88T11 11-1/2 3.505 1150HEX100T11
12 3.658 12HEX88T11 12 3.658 12HEX100T11

M
7/8" x 4-1 /4 shank 1 i f x 4-1/4" shank
Length Under Collar Part Price Length Under Collar Part Price
12° Ft. M. Number Each Ft. M. Number Each
2 .6096 02HEX88T12 2 .6096 02HEX100T12
2-1/2 .7620 0250HEX88T12 2-1/2 .7620 0250HEX100T12
3 .9144 03HEX88T12 3 .9144 03HEX100T12
3-1/2 1.067 0350HEX88T12 3-1/2 1.067 0350HEX100T12
4 1.219 04HEX88T12 4 1.219 04HEX100T12
4-1/2 1.372 0450HEX88T12 4-1/2 1.372 0450HEX100T12
5 1.524 05HEX88T12 5 1.524 05HEX100T12
5-1/2 1.676 0550HEX88T12 5-1/2 1.676 0550HEX100T12
6 1.829 06HEX88T12 6 1.829 06HEX100T12
6-1/2 1.981 0650HEX88T12 6-1/2 1.981 0650HEX100T12
7 2.134 07HEX88T12 7 2.134 07HEX100T12
7-1/2 2.286 0750HEX88T12 7-1/2 2.286 0750HEX100T12
8 2.438 08HEX88T12 8 2.438 08HEX100T12
8-1/2 2.591 0850HEX88T12 8-1/2 2.591 0850HEX100T12
9 2.743 09HEX88T12 9 2.743 09HEX100T12
9-1/2 2.896 0950HEX88T12 9-1/2 2.896 0950HEX100T12
10 3.048 10HEX88T12 10 3.048 10HEX100T12
10-1/2 3.200 1050HEX88T12 10-1/2 3.200 1050HEX100T12
11 3.353 11HEX88T12 11 3.353 11HEX100T12
11-1/2 3.505 1150HEX88T12 11-1/2 3.505 1150HEX100T12
12 3.658 12HEX88T12 12 3.658 12HEX100T12

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 116
 Intraset

7/8" x 4-1/4"
(22mm x 108mm)
LENGTH BIT SIZE Weight Part No.
4CHES mm INCHES mm Weight Kilogra

' 7" 800 1 .34 34 6.5 2.9 0250HEX88INTS34

'3" 1600 1 .30 33 11.9 5.4 05HEX88INTS33
'10" 2400 1 .25 32 17.6 7.9 08HEX88INTS32
Series 1.22 31 22.5 10.; 11HEX88INTS31
0' 6" 3200
11 3'1" 4000 1.18 30 28.0 12: 13HEX88INTS30
5' 9" 4800 1.14 29 33.5 15. 16HEX88INTS29

1
7" 800 1 .57 40 6.5 2.S 0250HEX88INTS40
'3" 1600 1 .54 39 11.9 5.4 05HEX88INTS39
Series '10" 2400 1 .50 38 17.6 7.S 08HEX88INTS38
12 0' 6" 3200 1 .46 37 22.5 10. 11HEX88INTS37
3'1" 4000 1 .42 36 28.0 12. 13HEX88INTS36
5' 9" 4800 1 .38 35 33.5 15. 16HEX88INTS35

!' 0" 600 1 .38 35 5.3 2.4 02HEX88INTS35

Series VO" 1200 1 .34 34 9.3 4.2 04HEX88INTS34
16 i'O" 1800 1 .30 33 13.2 5.£ 06HEX88INTS33
y 0" 2400 1 .25 32 17.6 7.£ 08HEX88INTS32

!' 0" 600 1.61 41 5.3 2.t 02HEX88INT

I'O" 1200 1 .57 40 9.3 4.1 04HEX88INT
Series 13.2 06HEX88INT
J'O" 1800 1 .54 39 5.J
17 17.6 7.J 08HEX88INT
j' 0" 2400 1 .50 38
0' 0" 3048 1 .46 37 22.0 9.J 10HEX88INT

1"x 4-1/4'i"
(25mm x 108mm)

2'0" 600 1.61 41 6.8 3.0

4'0" 1200 1.57 40 12.1 5.5
6'0" 1800 1.54 39 17.4 7.8
8'0" 2400 1.50 38 22.6 10.2

2'0" 600 1.75 45 6.8 3.0 02HEX100INT

4'0" 1200 1.73 44 12.1 5.5 04HEX100INT
6'0" 1800 1.69 43 17.4 7.8 06HEX100INT
8'0" 2400 1.65 42 22.6 10.2 08HEX100INT

prices of other sizes upon request

117 D & L THOMAS EQUIPMENT CORP.
 3
A" x 31/4" HEX SHANKS
For Use in Atlas Copco BBD II Drills or CARBIDE TIPPED
Other Makes With This Size Shank
BIT SIZE SHANK SIZE
DRILLING
DEPTH
0. A.
LENGTH
LENGTH
U. C.
ITEM
NO.
HOLLOW DRILLS
%" 3/4" x 31/4" 5" 12" 1216
3
/4" 3/4" x 31/4" 5" 12" 986
3
/4"
3
/4" * 3V 4 " 12" 19" 1239
3
3/4" /4" x 31/4" 18" 25" 1240
%" 3/4" x 31/4" 24" 31" 1241
%"
3
/4" X 31/4" 6" 12" 1227
1" 3/4" x 31/4" 8" 1233
1"
3
/4" X 31/4" 12" 1238
1V 8 " 3
/4" X 3%" 10" 1234
1V 4 " %" x 3V 4 " 10" 1235
Other sizes and lengths may be made to special order

3
A" x 41/4" HEX SHANKS
These drills are used with the BBD 12 Drill.
DRILLING O. A. LENGTH ITEM
BIT SIZE SHANK SIZE
DEPTH LENGTH U. C. NO.
3
/4" 3/4" x 41/4" 5" 13" 1930
7
/8" 3/4" x 41/4" 5" 13" 1931
11/8" 3/4" x 41/4" 15" 10" 1932
1%" 3/4" x 41/4" 24" 19" 1933

HOLLOW HARDTIP ONE-PIECE DRILL FOR USE WITHOUT ADAPTER

FOR USE IN CP-9 PNEUMATIC DRILL

CATALOG BIT DRILLING LENGTH
NUMBER DIAMETER DEPTH OVERALL

3154 5/16" 8" Solid IS-

3155 3/8" 8" Solid IS"
3156 7/16" 8" Solid 13"
3157 1 5/32" 8" Solid 13"

3140 1/2" 8" 13"

3141 1/2" 10-1/2" 16"

3142 5/8" 8" 13"

3143 5/8" 12" 17"
31438 5/8" 18" 23"

3144 3/4" 8" 13"

3145 3/4" 12" 17"
31458 3/4" 18" 23"

3146 7/8" 8" 13"

3147 7/8" 12" 17"
31478 7/8" 18" 23"

3148 1" 8" 13" Chisel

3149 1" 12" 17"
31498 1" 18" 23"

3150 1-1/8" 8" 13"

3151 1-1/8" 12" 17"
Bush Tool
31518 1-1/8" 18" 23"

3152 1-1/4" 8" 13"

3153 1-1/4" 12" 17" CP-9 Non Rotating Chipping Tools
31538 1-1/4" 18" 23"
Item No. Bit Size O.A. Length
3160 1 -3/8" 8" 13"
1818 Moil Point 10"
3161 1-3/8" 12" 17"
31618 1-3/8" 18" 23" 1818-16 Moil Point 16"
1819 Chisel, 1" Blade 10"
3162 1-1/2" 8" 13" 1819-16 Chisel, 1" Blade 16"
3163 1-1/2" 12" 17"
1819-24 Chisel, 1" Blade 24"
31638 1-1/2" 18" 23"
1820 Chisel, 2" Blade 10"
3164 1 -5/8" 8" 13" 18DP Diamond Point 10"
3165 1-5/8" 12" 17" 1815 Bushing Shank Only 9"
1816 Bushing Tool Complete 9 Tooth 10"
3166 1 -3/4" 8" 13"
3167 1 -3/4" 12" 17" 1817 Bushing Tool Complete 16 Tooth 10"

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 118
 CARBIDE TIPPED
HOLLOW DRILLS
MD8, 4105, UT-7, RD-7, JET AND
ATLAS DKR-32
HOLLOW HARDTIP ONE-PIECE DRILL FOR USE
WITHOUT ADAPTER
Item No. Bit Size Drill Depth O. A. Length
NO. 1840 1840 1
/2" 81/4" 13"
1841 1
/2" 12" 153/4"

1842 %" 81/4" 13"

1843 %" 12" 153/4"

1844 3/4" 81/4" 13"

1845 3/4" 12" 153/4"

1846 7
/8" 81/4" 13"
1847 7
/8" 12" 153/4"

1848 1" 81/4" 13"

1849 1" 12" 15%"
1850 1 1/a" 81/4" 13"
1851 1 Ve" 12" 153/4"

1852 1 1/4" 81/4" 13"

1853 1 1/4" 12" 153/4"

4 POINT DRILLS FOR USE IN SOFT STONE.

The 4 points keep drill from digging in,
so it will rotate properly.
SOFT STONE DRILLS
Item No. Shank Bit Length U.C.
3070 3
/4 * 3V 4 " 5
/8" 12"
3071 3
/4 X 31/4" 3/4" 12"
3072 3
/4 X 31/4" 7
/8" 12"
3073 3
/4 X 31/4" 1" 12"
3074 3
/4 X 31/4" 11/8" 12"
3075 3
/4 X 31/4" 1 1 /4" 12"
3076 7
/8 X 31/4" 5
/8" 12"
3077 7
/8 X 31/4" 3/4" 12"
3078 7
/8 X 31/4" 7
/8" 12"
3079 7
/8 X 3V 4 " 1" 12"
3080 7
/8 X 31/4" 11/8" 12"
3081 7
/8 X 31/4" 11/4" 12"
*3082J10 J10 Taper 1
/2" 6%" O.A.
NO. 3082J10
*30382J10. This type drill is used with No. 976 or
No. 1258 adapters.

CP-9 DRILL STEMS

These stems are used with tapered socket bits. They come in two sizes, large and small.
The small takes bit sizes from 1/2" to 3A" . The large takes bit sizes from 27/32" to 13/8".
Item No. Stem Size Bit Sizes O.A. Length Drill Depth
1
3158 %" /2" to %" 12" 8"
3159 %" 27
/32" tO 1 3 /8" 12" 8"

prices of other sizes upon request

119 D & L THOMAS EQUIPMENT CORP.
 FORGED STEEL WEDGES
SMALL HOLE STONE SPLITTING WEDGES AND SHIMS
Hole WEDGE SHIM
Size Length Item No. Length Item No.
%" 2Y 2 " 1594 2" Thin 1597
7/16" 2%" 1595 2" 1567
1
/2" 2%" 1566 2V2" 734

STONE SPLITTING WEDGES AND SHIMS

Hole Size at Item No. No. Sets Weight

Size Length Large End Wedge Shim Per Lb. Per Set
V 23/4" Y2" x 7/16" 727 735 5
%" 3Y 2 " 9/16" x Y2" 729 737 3
3/4 " 4" %" x y2" 731 739 2
Y8" 5" %" x %" 1570 1582 1 1 Ib.
1" 6" 3
/4" X 3
/4" 740 741 1% Ib.
1V 8" 1" X 1" 1568 1569 2% Ib.
3
1 /e" 12" 11/8" X 1Ve" 1571 1583 6 Ib.
1%" 18" 1V 8 " x 1V 8 " 1572 1584 9lb.
13/s" 24" 1 Ye" X 1 Ye" 1573 1585 11% Ib.
1 3 /e" 30" 1 Y8" X 1 Ye" 1574 1586 13 7 /slb.
1 3/e" 36" 1 Y8" X 1 Ys" 1575 1587 16Y 2 lb.
1%" 42" 1 Y8" X 1 Ya" 1576 1588 19Y2 Ib.
1%" 48" 1 Y8" x 1 Ye" 1577 1589 22 Ib.
NOS. 1594/1597 1%" 54" 1 Y8" x 1 V8" 1578 1590 24V 2 Ib.
NOS. 726/734 1%" 60" 1 Ys" X 1 Ve" 1579 1591 27Y 2 Ib.
STONE SPLITTING 1%" 66" 1 Y8" x 1 Ye" 1580 1592 30 '/2 Ib.
1 3 /e" 72" r/a" X 1V 8 " 1581 1593 33 Ib.
WEDGES AND SHIMS *No. 732 Wedge is a 4Y 2 " Westerly Wedge. Note-
Weights are approximate.

Size Item No.

GLUTS 1 V?" x 1 " x 9" 1633
NO. 1633 r/2" x r/2" x 12" 1634
2" x 2" x 10" 1636
2" x 2" x 12" 1637

WS WEDGES
WS WEDGES
These wedges have a round shank so they may be driven by a jack-
hammer or paving breaker. They are used with the same type of shim
as listed above. They may have either a 1" or 1 Ys" round shank. Sizes
available run from 12" to 72". More detail and prices gladly sent on
request.

BULL WEDGES
BULL WEDGE Used by paving cutters in making paving blocks. They are made from
alloy steel and properly hardened.

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 120
WHIRLIBITS

HOLE HOLE LENGTH

SIZE DEPTH UNDER SHANK 7/8 M X3-1/4 M 7/8 M X4-1/4 M 1 M X4-1/4 M
COLLAR
NUMBER WEIGHT NUMBER WEIGHT NUMBER WEIGHT
5/8" 6" 9" T30216 2 T31216 2
5/8" 9" 12" T30316 2-1/2 T31316 2-1/2
5/8" 14" 18" T30416 3-1/2 T31416 3-1/2
5/8" 20" 24" T30616 4-3/4 T31616 4-3/4
3/4" 6" 9" T30219 2 T31219 2 T32219 2-1/4
3/4" 9" 12" T30319 2-1/2 T31319 2-1/2 T32319 2-1/4
3/4" 14" 18" T30419 3-1/2 T31419 3-1/2 T32419 3-3/4
3/4" 20" 24" T30619 4-1/2 T31619 4-1/2 T32619 4-3/4
3/4" 26" 30" T30819 5-1/2 T31819 5-1/2 T32819 5-3/4
7/8" 6" 9" T30222 2 T31222 2 T32222 2-1/4
7/8" 9" 12" T30322 2-1/2 T31322 2-1/2 T32322 2-1/4
7/8" 14" 18" T30422 3-1/2 T31422 3-1/2 T32422 3-3/4
7/8" 20" 24" T30622 4-1/4 T31622 4-1/4 T32622 4-3/4
7/8" 26" 30" T30822 5-1/2 T31822 5-1/2 T32822 5-3/4
1" 6" 9" T30225 2 T31225 2 T32225 2-1/4
1" 9" 12" T30325 2-1/2 T31325 2-1/2 T32325 2-1/4
1" 14" 18" T30425 3-1/2 T31425 3-1/2 T32425 3-3/4
1" 20" 24" T30625 4-1/2 T31625 4-1/2 T32625 4-3/4
1" 26" 30" T30825 5-1/2 T31825 5-1/2 T32825 5-3/4
1-1/8" 9" 12" T30328 2-3/4 T31328 2-3/4 T32328 3
1-1/8" 14" 18" T30428 3-3/4 T31428 3-3/4 T32428 4
1-1/8" 20" 24" T30628 4-3/4 T31628 4-3/4 T32628 5
1-1/8" 26" 30" T30828 5-3/4 T31828 5-3/4 T32828 6
1-1/4" 9" 12" T30332 2-3/4 T31332 2-3/4 T32332 3
1-1/4" 14" 18" T30432 3-3/4 T31432 3-3/4 T32432 4
1-1/4" 20" 24" T30632 4-3/4 T31632 4-3/4 T32632 5
1-1/4" 26" 30" T30832 5-3/4 T31832 5-3/4 T32832 6
1-3/8" 9" 12" T30335 3 T31335 3 T32335 3-1/4
1-3/8" 14" 18" T30435 4 T31435 4 T32435 4-1/4
1-3/8" 20" 24" T30635 5 T31635 5 T32635 5-1/4
1-3/8" 26" 30" T30835 6 T31835 6 T32835 6-1/4
1-1/2" 9" 12" T30338 2-3/4 T31338 2-3/4 T32338 3-1/4
1-1/2" 14" 18" T30438 3-3/4 T31438 3-3/4 T32438 4-1/4
1-1/2" 20" 24" T30638 4-3/4 T31638 4-3/4 T32638 5-1/4
1-1/2" 26" 30" T30838 5-3/4 T31838 5-3/4 T32838 6-1/4

HOLE HOLE LENGTH

SIZE DEPTH UNDER C-9 WHIRLIBIT
COLLAR PART NUMBER WEIGHT
5/8" 8" 13" T90116 2-1/2
5/8" 12" 17" T90316 3-1/2 The C-9 fits the
5/8" 18" 23" T90416 4-1/2
3/4" 8" 13" T90119 2-1/2
following hammers
3/4"
3/4"
12"
18"
17"
23"
T90319
T90419
3-1/2
4-1/2
CP-9A MRD-9
7/8" 8" 13" T90122 2-1/2 5-LHD
7/8" 12" 17" T90322 3-1/2
7/8" 18" 23" T90422 4-1/2 If the size or dimension you
1" 8" 13" T90125 2-1/2
need is not listed, please ask
1" 12" 17" T90325 3-1/2
for assistance
1" 18" 23" T90425 4-1/2
1" 24" 29" T90625 5-1/2
ALL WEIGHTS ARE IN POUNDS UNLESS SPECIFIED
prices of other sizes upon request
121 D & L THOMAS EQUIPMENT CORP.
 Common Coupling Failures

Failure Type 1 occurs in the threaded portion of the coupling.

Failure Type 2 occurs in the area of the bridge.

Failure Type 3 is usually associated with the fact that the coupling cannot be removed from the drill rod,
and may occur as a longitudinal crack as shown.

CAUSE OF FAILURE MOST LIKELY REASON POSSIBLE REASON

TYPE 1 Worn threads Worn drill steel threads
See striking bar position
number 8 and drill steel
type 4 (b) )

TYPE 2 Improper mating of Fatigue from overheating

drill steels at the the coupling, especially
bridge when breaking joints.

TYPE 3 Rapping the coupling Coupling too long.

on the centralizer to Drilling with the rod not
break with joint firmly screwed into the
coupling.

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 122
 Couplings
Thread Part Number Price
1 R bridged 100RCPLB
1-1 Abridged 125RCPLB
1-1 /2R bridged 150RCPLB
1 -3/4R bridged 175RCPLB
2R bridged 200RCPLB
38 bridged 38CPLB
45 bridged 45CPLB
51 bridged 51CPLB
1400 bridged 1400CPLB
1600 bridged 1600CPLB
1700 bridged 1700CPLB
2000 bridged 2000CPLB
1-3/4K1 7 bridged 175K17CPLB
2K17 2K17CPLB

Reducer Couplings
Thread Part Number Price
H-D HXDCPL
1-1/4R-H 125RXHCPL
1-1/4R-1R 125X100RCPL
1-1/4R-1600 125X1600CPL
1-1/2R-1-1/4R 150X125RCPL
101/2R-1700 150RX1700CPL
38-1-1/4R 38X125RCPL
1200-H 1200XHCPL
1 400-1 -1/4R 1 400X1 25RCPL
1400-1600 1 400X1 600CPL
1600-1700 1 600X1 700CPL
1-1/2R-2R 150RX200RCPL
38-1-1/2R 38X150RCPL
38-45 38X45CPL
45-1700 45X1700CPL
45-51 45X51 CPL

Bit Adapters

Description Part Number Description Part Number

1-1/4" Female x 38 Male 125F38M 38 Female x 45 Male 38F45M
1" Female x 1-1/4" Male 100FX125RM 38 Male x 45 Female 38M45F
1-1/2" Female x 1600 Male 150F1600M 45 Female x 1-3/4" Male 45F175M
1-1/2" Female x 1700 Male 150F1700M 45 Female x 2000 Male 45F2000M
1-1/2" Female x 2" Male 150F200M D Female x 1-1/2" Male DFX150RM
1-1/2" Female x H Thread 150FH D Male x H Female DMXHF
1-3/4" Male x 38 Female 175M38F 1-1/2" Female x 2" K Male 150F2K17M
1700 Male x 45 Female 1700M45F 1-1/2" Female x 600 Male 150F600M
2" Female x 1-1/2" Male 200F150M 2" Male x 2" K Female 200MX2K17F
2" Male x 1-3/4" Female 200M175F 2" Male x 38 Female 200M38F
2" Male x 1-3/4" Male 200M175M 38 Female x 1-1/4" Male 38F125M
2" Male x 45 Female 200M45F 38 Female x 2" K Male 38F2K17M
38 Female x 1700 Male 38F1700M 45 Female x 51 Male 45F51M
45 Malex2K17 Female 45M2K17F
38 Female x 2K1 7 Male 38F2K17M

prices of other sizes upon request

123 D & L THOMAS EQUIPMENT CORP.
 Common Striking Bar Failures
6
7 8 9k
10

Position 1 is a chip off of the struck face.

Position 2 is about 1/2 to 1" from the struck end.
Position 3 is in the radius where the splines begin.
Position 4 is through the splines.
Position 5 is in the radius.
Position 6 is in the front bushing area.
Position 7 is at or near the beginning of the thread.
Position 8 is about 1/3 the way into the threads.
Position 9 is on the end of the thread.
Position 10 is a chip off of the coupling end.

CAUSE OF FAILURE MOST LIKELY REASON POSSIBLE REASON

Position 1 Metal Fatigue. Worn piston face, misalignment due
to worn bushings or over feeding.
Position 2 Fatigue through water seal recess. Worn chuck driver bushing.
Position 3 Worn chuck driver and/or front Lack of lubrication
bushing. Severe overfeeding.
Position 4 Worn chuck, heavy rotation loads. Poor lubrication.
Underfeeding.
Allowing too much "bounce".
Position 5 Too much rotation when pulling Severe overfeeding.
rods out of hole.
Position 6 Misalignment from worn front Lack of lubrication.
bushing.
Position 7 Misalignment of drill feed while "Running" or "Wandering " hole
drilling (loss of sting). (bit not drilling straight).
Position 8 Worn threads. Worn coupling.
Position 9 Chipped rod end, damaged Poor heat treatment.
Position 10 Striking bar not properly joined End of drill rod broken or not cut
to drill rod in coupling, off true.
(incorrect bridge size in coupling)

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 124
 Striking Bar Index
HAMMER LOCATION Striking Bars Page5126-146 HAMMER LOCATION
MODEL NUMBER MODEL NUMBER
COLLARED ^^| HAMMER LOCATION ^H JOY
- CONTINUED ^H
7/8" Hex x 4-1/4" See Page MODEL__________ NUMBER VCR150 28
1" Hex^4-1/4"__________ 116 ^^H GARDNER DENVER ^^H VCR260 29
ATLAS COPCO ^^H 123 2 VCR261 29
1032HD 42 79 1 VCR280 31
1036HB 38,39 AR93 21 VCR350 28
1038HB 38,39 93 1 VCR360 29
1038HD 38,39 99 1,3 VCR361 30
1038HL 40 DH123 2 VCR460 29
1238HB 38,39 DH99 2 Beaver 24
1238LF 38,39 HPR-1 17 500RR 25
1238LE 38,39 HPR-1 ext./F 18 500RRM52 26
1238ME 38,39 HPR-1-H 15, 16 600RR____________ ^H 27
BBC100 1 HPR-2 19,20 ^^H LEROI
BBC120 32 PR1000 12 455R 7
BBC41 1 PR123 5, 7, 8, 9 LHD155___________ ^^ 7
BBC43 1 PR133 6 ^^H MITSUBISHI
BBC44 1 PR143 4 TR300 7
BBC45
BBC51
BBC52
1
32
32
PR55
PR66
PR80
7,8,9 TR400
13, 14 ^^|
^ ^ 1 0 , 11 H100
MONTABERT
• 7

34,36
BBC54 32 ^^H HOLMAN H40 32
BBE56U2 34, 35, 36 160 2 H50 32
BBE57 34, 35, 36 S115R 7 H60 32
COP125 33 SL16A___________ ____ 1 H70 61
COP126 41 ^^H INGERSOL-RAND ^^H LC50 1
COP130 33 45 2 TA35 __ 1
COP131 33 475 2 ^H SCHRAM
COP150 37 D40 1 176R 2

•
BOHLER ^^H DC35 1
HM750 7 EVL130 7 ^^H TAMPELLA
HM751 7 F16 7 S125 1
HM753 43 LM500 67 L750 ___ 7
^^ CHICAGO PNEUMATIC ^^^ URD350 1 ^HV TAMROCK
400D 1 URD550A 7 HL1000 00
DO

400DR 2 VL120 7 HL432 43

450 2 VL140 7 HL438 45
60N 1 VL170 48,49 HL438TS 44
CP451 7 VL671-4flt 50 HL500 65
CP475 60 VL671-5flt 51 HL538TS 44
DEMAG ^^| YD90M 52 HL850 46
RD500 ____________ 7 YH65 67 HL850 ext. 47
FURUKAWA ^^H YH60 34,36 L400 43
HD120 7 YH95 ___________ ^^^^H CQ
bo L410 43
M110 2 ^^H JEAGER L500 43
M120 7 450AL 2 L600 7
HD200 56 450A^^^^^^^^^^^^ 7 L750 7
HD260 34, 36, 56 ^^^^^^^^^^^1 S125 ____________ ^^ 1
HD300 56 JH2 62 ^^H TOKYO RYUKI
PD200 53, 54, 55 JH3 63 YH70 34
HD500 57 JH4 64 YD13^^^^__^__ ^^ 7
HD609 58,59 TM400 1 ^^^^^^^^^^^^1
HD612 58,59 TM450DR 22 TYPR120 7
HD615 58,59 TM450 23 TYPR220 7

prices of other sizes upon request

125 D & L THOMAS EQUIPMENT CORP.
 Striking Bars
i 3 /2 VJHZ.^U mm; ———————

^^
f~~
62 mm) mm)
——1——————————

t——i
1 *—————————
1 / 4 " (31.75 mm)
-f I
(20.64 mm)
_ 33 „_ y ,L
(96.84 6 mm)( 19 - 05

Tube Part
Drill Type Style Size Thread Number
Gardner Denver - 79, 93, 99 LUG 5/16" 1R 79T1002S5
Ingersol Rand - DC35, D40, URD350, 505 3/8" 1-1/4R 79T125S6
Atlas Copco - BBC41 , 43, 44, 45, 1 00 7/1 6" 1-1/2R 79T1502S7
Tarn rock- S125 7/1 6" 38 79T382S7
Joy - TM400 5/1 6" 1200 79T12002S5
Holman -SL16A 3/8" 1400 79T14002S6
LeRoi-D14DR, D25DR 7/1 6" 1600 79T16002S7
CP-400D, 60N
Tampella- S125
Montabert - TA35, LC50

13!/2" (342.90 mm)-

V/i" *
1!/2" (38.10 mm)
(38.10 mm)
1__

(38.10 mm) 1"

(96.84 mm) (25.40 mm)

Tube Part
Drill Type Tangential Style Size Thread Number
Gardner Denver -DH1 23, DH99, 123, CH123 LUG 7/1 6" 1-1/4R DH123T1252L7
Ingersoll Rand - 45, D475, URD475 9/1 6" 1-1/2R DH123T1502L9
CP-450, 400DH, 400DR 9/1 6" 38 DH123T382L9
Holman -SL1 60 7/1 6" 1400 DH123T14002L7
Jaeger - 450AL 9/1 6" 1600 DH123T16002L9
Schramm - 176R 9/1 6" 1700 DH123T17002L9
Furukawa-M110, 795D

———— — — 1 3 - 1 / 2 " ( 3 4 3 m m )

3-13/16" (96.8 mm - 1 " ( 2 5 . 4 mm)

2-5 64
(70 6 mr
1-31/64" (37.7 mm) 1-17/64" (32.1 mm)

t_______

Tube Part
Drill Type Tangential Style Size Thread Number
Gardner Denver - 99 LUG 3/8" 1-1/4R 99T1252L6
7/1 6" 1-1/2R 99T1502L7
7/1 6" 38 99T382L7
3/8" 1400 99T14002L6
7/1 6" 1600 99T16002L7

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 126
 Striking Bars

4
.H 2-1/2" __ ___ 6" ,___ 1"
(63.5mm) (152.4mm) ~H P (25.4mm)

1 ^~^\ /——K

(S5~7mm) (J j 2-31/64" (63.1 mm) / V 2-31/64" (63.1 mm) | // // / / // // // / / ,|

Tube Part
Drill Type Tangential Style Size Thread Number
Gardner Denver - PR1 43 LUG 1" 2R PR143T20002S16
1" 1800 PR143T18002S16
1" 2000 PR143T20002S16
1" 2K17 PR143T2K172S16

5
l
"I "**™** **Mm** I mM
^ I
1—————— i. , ...... , ,..,... .......................... ........... ^iMWiimii%
.,,,^|,,i
.... . .. ......... :g^;g:;^^|ppg:
; ; ! jSlSliiSJliiiililgiliiliiJli^^^

lUl

Tube Part
Drill Type Style Size Thread Number
Gardner Denver - PR1 23 4 Spline 9/16" 1-1/4R PR123T1254S9S
Tunning Style 9/16" 1-1/2R PR123T1504S9S
9/16" 38 PR123T384S9S
9/16" 1400 PR12314004S9S
PR123T16004S9S
PR123T17004S9S

23/32" 3-13/16" 2-3/8"

I (18.3mm) 96.8mm) ( 6 0 . 3 m m ) ~~]

i
i y^r^ ~^
\ i f~
L ^
^—r^^——---— >n
(5^* G^rnrn) I ( ( ( / ) ) ) 1-2/4" (44.5mm) 1 -3/4" (44. 5 mm)

X^"^/ \ I __J^^^_^^-^^^-JUl
| ^__^J V——_____________ /

Tube Part
Drill Type Style Size Thread Number
Gardner Denver - PR1 33 4 Spline 5/8" 1-1/2R PR133T1504S10
5/8" 1-3/4R PR133T1754S10
5/8" 38 PR133T384S10
5/8" 45 PR133T454S10
5/8" 1600 PR133T16004S10
5/8" 1700 PR133T17004S10
5/8" 1800 PR133T18004S10

prices of other sizes upon request

127 D & L THOMAS EQUIPMENT CORP.
 Striking Bars

i
1 3 /4"
f———r 1 3 /4"
•^_—^-s_^-v^-^»x~^^-«^—>_

(44.45 mm) (44.45 mm)

f I I
23
/ 32 " (18.26 mm)
(96.84 mm) (63.50 mm)

Tube Part
Drill Type Style Size Thread Number
Gardner Denver - PR123, PR55 4 Spline 9/1 6" 1-1/4R PR123T1254S9
Ingersoll Rand - URD475A, URD550, F16 9/16" 1-1/2R PR123T1504S9
VL120, EVL130, VL140 9/1 6" 1-3/4R PR123T1754S9
Holman - S115R 9/16" 38 PR123T384S9
Demag - RD500 9/1 6" 45 PR123T454S9
Worthington - WD48PR 9/16" 1400 PR123T14004S9
Bohler-HM750, HM751 9/1 6" 1600 PR123T16004S9
CP-451 9/16" 1700 PR123T17004S9
LeRoi-455R, LHD155
Jaeger - 450AS
Worthington - WD49 Tamrock - L600, L750
Sullair-750, 751 Tokyo Ryuki-YD135
Toyo- PR220, PR120 Mitsubishi - TR300, TR400
Tampella - L750 Furukawa-M120, HD120

1 P'*'1"' p3-13«8m"T,«&
5
n
J "" "~S /—————————————————————— i
/f ^S^\ i ^t————————————————————————————^ ^
1-1/4" — 1-9/16"

II
, 5 5 6 mm, f f (Q) J 1 1 -1 /2" (38.1 mmi (31.8 — 39.7 mm)

1
I ^N^ ^// \
I V _/ -H———— -—————^ 11 fl

Tube Part
Drill Type Style Size Thread Number
Gardner Denver - PR123, PR55 4 Spline 9/16" 1-1/4R PR123T125D4S9
-Differential Style- 9/16" 1-1 /2R PR123T150D4S9
1-1/2" Shank Diameter 9/16" 38 PR123T38D4S9
9/1 6" 45 PR123T45D4S9
9/16" 1600 PR123T1600D4S9
9/16" 1700 PR123T1700D4S9

e
——————————————
h^f- 13 i /2 » (342 90 mm) —————————— ^
i ^ i
I ^ 4 ^—p-^^^^^^^^^-^
f 1 \———
r/2"
(55.56 mm) (44.45 mm)
| f ^^^^^^^
w
-»!»/ U- L_ 13/ " 11/ ^ .f

(18.26 mm) (96.84 mm) (63.50 mm)

Tube Part
Drill Type Style Size Thread Number
Gardner Denver - PR55, PR123 4 Spline 9/16" 1-1/4" PR55T1254S9
9/16" 1-1 /2"R PR55T1504S9
9/1 6" 38 PR55T384S9
9/16" 45 PR55T454S9
9/16" 1600 PR55T16004S9
9/16" 1700 PR55T17004S9

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 128
 Striking Bars

—— 30"
(762 Omrr

" 1-51/64"
j i (45.6mm)

3-13/16"-^ 2-13/32"
23/32" (96 8mm) 61. Imrni
(18.2mrr

Tube Part
Drill Type Style Size Thread Number
Gardner Denver - PR80 4 Spline 3/4" 2R PR80T2004S12
3/4" 1800 PR80T18004S12
3/4" 2000 PR80T20004S12
3/4" 2K17 PR80T2K174S12

_-._...————— 30" (762 mm) ———————————— ——

Tube Part
Drill Type Style Size Thread Number
Gardner Denver - PR80 6 Spline 3/4" 2"C-17 PR80T2K176S12
3/4" Series 1800 PR80T18006S12
3/4" Series 2000 PR80T20006S12

rf —•——i —————

O 4 i , W///J

Tube Part
Drill Type Style Size Thread Number
Gardner Denver - PR1000 EXT 1-1/2R PR1000T1504SE
External Flushing 4 Spline EXT 38 PR1000T384SE

prices of other sizes upon request

129 D & L THOMAS EQUIPMENT CORP.
 Striking Bars

13 ±^
(635.0mm)

'"7^ : .f J= T
(44. 5mm) "> (44.5 mm )
/w/'/i
39/64"
(15.5mm)

Tube Part
Drill Type Style Size Thread Number
Gardner Denver - PR66 6 Spline 5/8" 1-1/2R PR66T1506S10
5/8" 38 PR66T386S10
5/8" 45 PR66T456S10
5/8" 1600 PR66T16006S10
5/8" 1700 PR66T17006S10

B • __. _9/16" ___ 3 - 1 3 / 1 6 " ____ _ _ 2 - 1 1 / 3 2 " _

~H pl4mm (96.8mm) (59.5mm)

1-3/4* (44.5mm) f 1-3/4" (44.5mm) )V // // // • / / // //I

i i—— i ^— ^ J^/J/j/JL//Jl
S
Tube Part
Drill Type Style Size Thread Number
Gardner Denver - PR66 6 Spline 5/8" 1-1/2R PR66T1506S10T
Tuning Style 5/8" 38 PR66T386S10T
5/8" 45 PR66T456S10T
5/8" 1700 PR66T17006S10T

15 £
L^ .

p 1-3/4" (45mm) \ f ? U i -3/4" (45mm)u y y^ || \[ \\ i\

————————— \TJ

29" (744mm)

Tube Part
Drill Type Style Size Thread Number
Gardner Denver- HPR1H 12 Spline 5/8" 1-1/2R HPR1 HT15012S10
Central Flushing 5/8" 38 HPR1HT3812S10
5/8" 45 HPR1HT4512S10

16 f ^^
^U

29" (744mm)

Tube Part
Drill Type Style Size Thread Number
Gardner Denver - HPR1 H 12 Spline EXT 1-1/2R HPR1 HT15012SE
External Flushing EXT 38 HPR1HT3812SE
EXT 45 HPR1HT4512SE

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 130
 Striking Bars

U -- 9 - 1 / 8 " (231 8mm| -^ ^ 5/8"

(159mm)
17
1- '^-^ n
^((oj) •- ~^~— roiM/i
"-^
Tube Part
Drill Type Style Size Thread Number
Gardner Denver - HPR1 1 4 Spline 9/16" 1-1/4R HPR1T12514F9
Central Flushing 9/16" 1-1/2R HPR1T15014F9
9/16" 38 HPR1T3814F9
9/16" 45 HPR1T4514F9

, _ 18
24 3 8 ^-«
(619 1mm)

\/ / j xv y j i f ———TTTTTTTTTn
(476l,(^j|)
!///////
V$ I 9 »9 >
\.————liLLLLiJIJti
\ /'/'/'/'/'/'/M

-^ 9 13/64"
(233.8mm) 58' 38 1mm i
:i5.9mm(

Tube Part
Drill Type Style Size Thread Number
Gardner Denver - HPR1 1 4 Spline EXT 1-1/4R HPR1T12514FE
External Flushing EXT 1-1/2R HPR1T15014FE
EXT 38 HPR1T3814FE
EXT 45 HPR1T4514FE

rno. *___ ^ II 19
^ ^ |U=^^3 D 2" (51mmj ^ ////////// I

uj fr
L ——————————————————————————————^|
3 5" (914mm)

Tube Part
Drill Type Style Size Thread Number
Gardner Denver - HPR2 14 Spline EXT T45 HPR2T4514SE
External Flushing EXT T51 HPR2T514SE

^ «__ =ak ^ -
20
w ^ £•— ' t ' T?r '|-
\ D 2" (51mm)
T---T ;-•---
. 7 / / / / / / / / fl
7-i///////J
3^
L I
36" (91 4mm)

Tube Part
Drill Type Style Size Thread Number
Gardner Denver - HPR2 1 4 Spline 3/4" T45 HPR2T4514S12
Central Flushing 3/4" T51 HPR2T5114S12

prices of other sizes upon request

131 D & L THOMAS EQUIPMENT CORP.
 Striking Bars

21 |—————— i* 1 1 $2.4 ursmj -••——,,,,,,,, _^

r^ _ __.....__ ____ ........ ...Jlw

•hW M&.W
(44,$ stwQ :|3g.i mfH|

l
L™jsdU^ — ^p.,?. ••- - -•» •*ws««^.. • • • •

Tube Part
Drill Type Style Size Thread Number
Gardner Denver - AR93 3 Fluted 5/16" 1-1/4R AR93T1253F5
5/16" 1-1 /2R AR93T1503F5
5/16" 38 AR93T383F5
5/16" 1400 AR93T14003F5
5/16" 1600 AR93T16003F5

22
fcfc
A i -i>.l

* i)
16" _ __ 3-13/16" , 1-3,8" :
mm) ( S 6 . 8 mm) ~~j ( 3 4 . 9 mm)

I_____ ! i

I . . ! ^————————
1-47/64" (44.1 mm) 1 -55/64" (47.2 mm) | ]

I /- , • \ __J_1________JJ
\=V

Tube Part
Drill Type Style Size Thread Number
Joy - TM450DR LONG 9/16" 1-1/2R TM450DR1502S9
9/16" 38 TM450DR382S9
9/16" 1600 TM450DR16002S9
9/16" 1700 TM450DR17002S9

23 ~| p- 16"
3mm)
3-13/16"
(96.8mm) ~~^1
27/32"
^~(21. 4 mm)

i r~ ~^i —!i—r^\——Ii——r p.————-r*

1-47/64" (44.1 mm) 1 -55/64" (47.2 mm)
.tK/O)
i — i x
\——/
i U. . . . . .IJ
Tube Part
Drill Type Style Size Thread Number
Joy - TM450 SHORT LUG 9/16" 1-1 /2R TM450T1502S9
9/16" 38 TM450T382S9
9/16" 1600 TM450T16002S9
9/16" 1700 TM450T17002S9

24 , r ,mi U-— 3-13/16" (96.8 m m ) - - —| I—— 59/64"(23.4 mm)

t—————\
I !1 ^———i-——*^~^~—~~_^—-^—^_—-j^—.
—r Bl
.k ((O^) 1-25/64" (35.3mm)

|
1 -1/2" (38.1

|
mm)

I——. _ _ _ _ ____ .JLJ

^=^

Tube Part
Drill Type Style Size Thread Number
Joy - Beaver 4 Spline 7/16" 1-1/4R BT1254S7
7/16" 1-1 /2R BT1504S7
7/1 6" 38 BT384S7
7/16" 1400 BT14004S7
7/16" 1600 BT16004S7

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 132
 Striking Bars

ir (25.4 mm) —— 3-1 3/1 6" (96. 8 mm)

Tube Part
Drill Type Style Size Thread Number
Joy - 500RR 4 Spline 7/8" 1-1/2R 500RRT1504S14
7/8" 1-3/4R 500RRT1754S14
7/8" 38 500RRT384S14
7/8" 45 500RRT454S14
7/8" 1600 500RRT16004S14
7/8" 1700 500RRT17004S14

—— 1 " ( 2 5 . 4

j f X

2-15/64" 1-: /4"

(56.8 mm) (44.5 mm)

I
!•'• -

Tube Part
Drill Type Style Size Thread Number
Joy - 500RRMS2 4 Spline 7/8" 1-1/2R 500RMS21504S14
7/8" 38 500RMS2384S14
7/8" 45 500RMS2454S14
7/8" 1600 500RMS216004S14
7/8" 1700 500RMS217004S14

r
1 " ( 2 5 . 4 mm) • — — 3 - 1 3 / 1 6 " ( 9 6 . 8 m m )
————14" — 16" ( 3 5 6 — 4 0 6 m m ) -

r==
V,
'
t
2-15/64'f
• I
' 2-19/64"
(56.8 mm) (58.3 mm)

Tube Part
Drill Type Style Size Thread Number
Joy - 600RR 4 Spline 1" 2R 600RRT2004S16
1" 1800 600RRT18004S16
1" 2000 600RRT20004S16
1" 2K17 600RRT2K174S16

prices of other sizes upon request

133 D & L THOMAS EQUIPMENT CORP.
 Striking Bars

28
1 h"" 5mm, —— 3-3/4" (95.3mm)--1 ^-'^ I——

5°^ •-,
1____ £

}——————L
J
!
1-1/4" (31. 8 mm)
t . _ I-
Tube Part
Drill Type Style Size Thread Number
Joy- VCR-150 6 Spline 7/1 6" 1-1 /4 Rope VCR1 50T1 256S7
VCR-350 7/1 6" 1-1 12 Rope VCR1 50T1 506S7
7/16" T-38 VCR150T386S7
7/16" 1400 VCR150T16006S7
7/16" 1600 VCR150T17006S7

29 ——————————————————— 15!/4" (387.35 mm) ————

r- —————F=^—.—r-—————-——.
1^4" ' iJ W
U (Q) P(60.32 mm
) (44.45mm) r*——————— -j (38.10mm)
t r———*i~^—'—
/ 3 2 " d O 32 mm
__^^_21/4"-^
12
-J L
) ^__ 4"/6"
(119.06mm) (57.15mm)

Tube Part
Drill Type Style Size Thread Number
5/8" 1-1/4R VCR260T1258S10
Joy - VCR 260, 360, 460 8 Spline 5/8" 1-1/2R VCR260T1508S10
Joy VCR261 - 5/8" 1-3/4R VCR260T1758S10
Same w/3/4" Tube Size 5/8" 38 VCR260T388S10
5/8" 45 VCR260T458S10
5/8" 1 600 VCR260T16008S10

30 -—————————————————— 17" ———

<XaX>
^N——•—
——————— t ——————————-———.
d (O) p 2-5/16
* r*
2" 1-3/4"

L_ —————————{ ————^

JL
7/16"
-—— 4-3/4" ——-~ -*-2-1 /4'-1*-

Tube Part
Drill Type Style Size Thread Number
Joy - VCR361 8 Spline 3/4" 38 VCR361T388S12
3/4" 45 VCR361T458S12

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 134
 Striking Bars

19-1/2" (495mm)

2" (50.8mm)

Tube Part
Drill Type Style Size Thread Number
Joy VCR 280 10 Spline 1-1/4" 2" Rope VCR280T20010S20
1-1/4" 2"-17 VCR2802K1710S20
1-1/4" 1800 VCR280180010S20
1-1/4" 2000 VCR280200010S20

IS" pll mm}

,,,i.ii:,l
,
' ~~

Tube Part
Drill Type Style Size Thread Number
Atlas Copco - BBC51 , 52, 54, 1 20 2 LUG 7/16" 1-1/4R BC51T1252S7
Montabert - H40, H50, H60 7/16" 1-1 /2R BC51T1502S7
7/1 6" 38 BC51T382S7
7/16" 1400 BC51T14002S7
7/16" 1600 BC51T16002S7

.... MM
m.® f»m

, ^^
!!!!!!!!!!!!!!l!!lll!!!!!lllli!!llll

E::J
Tube Part
Drill Type Style Size Thread Number
Atlas Copco- 125, 130, 131 3 Fluted 9/16" 1-1/4R COP125T1253F9
9/16" 1-1/2R COP125T1503F9
9/1 6" 38 COP125T383F9
9/16" 1400 COP125T14003F9
9/1 6" 1600 COP125T16003F9

prices of other sizes upon request

135 D & L THOMAS EQUIPMENT CORP.
 Striking Bars

34 _ ..... —————————

l
2
T" /x^Vs
16 4 3 m m !

J
1
I

Cv ^O
\_ j
ff J f
i
1-3/4" ( 4 4 . b m m )

\
f

J
\^
—^
L
y
i
M-3/4"{44Rmm

1 xzi
~-—p—>——-——-—-—»_

Tube Part
Drill Type Style Size Thread Number
Atlas Copco - BBE56 U2, BBE57 6 Spline 9/16" 1-1/2R BBC56T1506S9
Montabert- H1 00 9/16" 1-1/4R BBC56T1756S9
FuruKawa-HD260 9/16" 38 BBC56T386S9
Ingersol Rand YH60 9/16" 45 BBC56T456S9
Tokyo Ryuki - YH70 9/1 6" 1 600 BBC56T1 6006S9
9/16" 1700 BBC56T17006S9

35 17/32" 6-1/2" 3-1/8"

~1 r ( l 3 . 5 m m ) (165.1mm) (79.4 mm) H

J_1 / \ ^/

O
'/vxx ' ' ' '' "
2 - 1 7 nr>Cf ^^ 1 i r 1
(64.3 mm) I I 1-3/4" (44.5 mm) f Jl -3/4"(44.5 mm)
VX^_^Xv j j 'i i
[ \ T \ _y ~^\

Tube Part
Drill Type Style Size Thread Number
Atlas Copco - BBE56U2, BBE57 6 Spline EXT 1-1/4R BBE56T1256SE
BBE57 EXT 1-1/2R BBE56T1506SE
Female Thread - External Flushing EXT 38 BBE56T386SE
EXT 45 BBE56T456SE

36 1 7 -?• 6-1 2" 3-1 8"

'!
r / \ V "V
o^ ^"x^ ^ j i i r^——\A—
1 6-1 3 r
™'<VjpA •- p- L———^'-3, p™,^ ^ llJJlllllllJtJ
L

Tube Part
Drill Type Style Size Thread Number
Atlas Copco - BBE56 U2, BBE57 6 Spline 9/16" 1-1/2R BBE56T1506S9T
Montabert - H1 00 9/1 6" 38 BBE56T386S9T
FuruKawa-HD260 9/16" 45 BBE56T456S9T
Ingersol Rand - YH60

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 136
 Striking Bars

i558. 8mm)

T
1-7/8"
147.6mm)
f- ——————————————————S
1^————————————————J

> „ /
1-25/32"
(45.2mm)
J

«& w/vi.
h^ 2-45/64" 6" ---
168.7mm; 1152.4mm)

Tube Part
Drill Type Style Size Thread Number
Atlas Copco - COP150 8 Spline 5/8" 1-1/2R COP150T1508S10
5/8" 38 COP150T388S10
5/8" 45 COP150T458S10
5/8" 1700 COP150T17008S10

r -2241/64"
(575mm)

.///I I/
r 1-3/4" (44.5mm)
& _ _ _ _ _ _ _
f / I \/ / / /

23 64
(9 1mm

Tube Part
Drill Type Style Size Thread Number
Atlas Copco - 1 036HB, 1 038HB, 1 038HD 8 Spline EXT 45 1238MET458SE
External Flushing 1238ME, 1238LE EXT 1700 1238MET17008SE
for 1-3/4 dia. only

-2-55/I
(72.6mm)

Tube Part
Drill Type Style Size Thread Number
Atlas Copco - 1 036HB, 1 038HB, 1 038HD 8 Spline EXT 1-1/4R 1238MET1258SE
External Flushing 1238ME, 1238LE EXT 1-1/2R 1238MET1508SE
for 1-1/2" dia. only 1038HF, 1238HF EXT 38 1238MET388SE
EXT 1600 1238MET16008SE

prices of other sizes upon request

137 D & L THOMAS EQUIPMENT CORP.
 Striking Bars

__ 2-3/8" ,_. . 2-59/64" __

H p(8.7mm) (60.3 mm) (74.2 mm)

1-11/32"
1
^——————^ 4/ '
v————*-*-L -^ -k^L-J
f
v
J
——^?— ~ i
Tube Part
Drill Type Style Size Thread Number
Atlas Copco -COP1038HL 8 Spline EXT 1-1/4R 1038HLT1258SE
External EXT 1-1/2R 1038HLT1508SE
EXT 38 1038HLT388SE

Tube Part
Drill Type Style Size Thread Number
Atlas Copco - COP126 5 Spline EXT 1-1/2 COP126T1505SE
External Flushing EXT 38 COP126T385SE
EXT 45 COP126T455SE

58mm |

o
/———————^

?———————1
33.9mm " 1 o
———iF=^
54mm

Tube Part
Drill Type Style Size Thread Number
Atlas Copco- 1032HD 8 Spline EXT 1-1 /4R AC1032T1258SE
Female Thread EXT 1-1 /2R AC1032T1508SE

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 138
 Striking Bars

———— ib (J81 mm) —— — _______

3-13/16" 25/32"
(96.8 mm) (19.8 mm)

Q
N

(47.6 mm
——— '————*
1-1/4" (31. 8 mm)
t
————1——————— '
1-17/64" (32.1 mm)
t i
Tube Part
Drill Type Style Size Thread Number
Tamrock - L400, 500, HL432, L410 4 Spline 3/8" 1-1/4R TL400T1254S6
Sig- HBM100
Bohler-HM753

———18 1/4"
(463.6mrr

Tube Part
Drill Type Style Size Thread Number
Tamrock - HL438TS, HL538TS 4 Spline EXT 1-1/4R HL438T1254SE
External Flushing EXT 1-1/2R HL438T1504SE
EXT 38 HL438T384SE
EXT 1600 HL438T16004SE

3-13/16"
(96.8mm)

! 1
1-1/2" (38.1 mm) 1-1/2" (38.1 mm)

! ^ "i
L_ ^

Tube Part
Drill Type Style Size Thread Number
Tamrock- HL438 4 Spline 1/2" 1-1/4R HL438T1254S8
1/2" 1-1/2R HL438T1504S8
1/2" 38 HL438T384S8

prices of other sizes upon request

139 D & L THOMAS EQUIPMENT CORP.
 Striking Bars

^fO o^o
I—————j
i
] |
)
D 2-1/32"(52mr{i)

^————.————-———-
20" (51 3mm)
\
// / / / /
• \\ It j i
!

;.'•
I
Tube Part
Drill Type Style Size Thread Number
Tarn rock HL850 8 Spline 3/4" 38 HL850T388S12
Central Flushing 3/4" 45 HL850T458S12
3/4" 51 HL850T518S12

4f C0^ /^"""^^™^™"™""™"^\ ir' I

d
**y r*T«: •: ;: T**"
: i..^t^»wnwrN^?^r>
;;
' (
> ID
i 2-1/32"_[52mm) _'
jl / \i -,;
J. ........ ....' __jl ,;
•';
;
:: :L
V/LJV/ ^ /
*———————————J^6j___________ I V- ^——————-————————I'—*****
' ^JLli,^
—«-*Lt^J^U<->~^
^————————^ 26" (667mm)

Tube Part
Drill Type Style Size Thread Number
Tarn rock HL850 8 Spline EXT 45 HL850T458SE
External Flushing EXT 51 HL850T518SE

48 |
_ 37/64"
(14.7mm)
4-5/16"
(109.5mm)
2-7/16"
(61.9mm)"

f~ ^ V V ^r^ ^r-^ ^TT. ^r-v ^-v ^T-K ^r->-

/^^ ^^v i j TTT~TPTr^/TTrTrTTTi

,1, rf
(69.9mm)^(

L.J
x
^—^'^ *
\ /, \l II II II II II II II

Tube Part
Drill Type Style Size Thread Number
Ingersol Rand - VL170 5 Spline 1" 2R VL170T2005S16
1" 1800 VL170T18005S16
1" 2000 VL170T2005S16
1" 2K17 VL170T2K175S16

L^——— _ ———— _. _ .. . .. . . _ . . . . - . . . _ 17' ----- --- .- - -- - .-- ^ ^-

I43 1.8mm

49
-WS\ » |
W 2«r2 1
80 ,„.,„ UK
* 2i 1
'T
WiLWTi
TI'JTI'I'ITII 1
L_J^=
__ h* h* 6 1/2" - • -~^ -^
46/64t" I165.1mml 3/4"
(17.9m m 119.1mm)

Tube Part
Drill Type Style Size Thread Number
Ingersoll Rand - VL170 4 Fluted 1" 2R VL170T2004F16
1" 1800 VL170T18004F16
1" 2000 VL170T20004F16
1" 2K17 VL170T2K174F16

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 140
 Striking Bars

r~
——— 6-1/2" (165.1 mm) ——-^ i—— 23/32" (18.3 mm)

r /^F-^X i r————— i ^ " " "fn7 n~n~n~n

3-7/16" [ 1 i f ^ ^ ] I 2-1 5/32"
(87. 3 mm) i I

L . V^x
\-^ / /(62.7mm)
T- , llMW
Tube Part
Drill Type Style Size Thread Number
Ingersol-Rand VL671 4 fluted 9/16 1-1/2" rope VL671T1504F9
old style 9/16 T38 VL671T384F9
9/16 T45 VL671T454F9
9/1 6 2" C-1 7 VL671 T2K1 74F9
9/1 6 Series 1 700 VL671 T1 7004F9
9/1 6 Series 1 800 VL671 T1 8004F9

5 fluted 9/16 T38 VL671T385F9

9/16 T45 VL671T455F9
9/1 6 2" C-1 7 VL671 T2K1 75F9

21" (533mm)

d ——————ZZ>
—————r^
1
i
D 1-3/4"
i

Tube Part
Drill Type Style Size Thread Number
Ingersol-Rand VL671 5 fluted 3/4" 38 VL671T385F12
New Style 3/4" 45 VL671T455F12
3/4" 1700 VL671T17005F12
3/4" 2K17 VL671T2K175F12

_-
, 42.8mm,
5mm 1——1
36mm
1
\\N\V

VOOOO^
i {] J^ 4
=1 11.1mm

50mm

Tube Part
Drill Type Style Size Thread Number
Ingersol-Rand YD90 4 Spline 3/8" 1-1/4R YD90T1254S6

prices of other sizes upon request

141 D & L THOMAS EQUIPMENT CORP.
 Striking Bars

15" - 380mm
3/4"- 18.2mm

2-1/2-64mm

Tube Part
Drill Type Style Size Thread Number
Furukawa PD200 4 Spline 9/1 6" 1-1/2R PD200T1504S9
9/1 6" 38 PD200T384S9
9/1 6" 45 PD200T454S9
9/1 6" 1600 PD200T16004S9
9/1 6" 1700 PD200T17004S9

18" - 460mm

Tube Part
Drill Type Style Size Thread Number
Furukawa PD200 4 Spline 9/16" 1-1/2R PD200T1504S9T
Long Shank 9/16" 38 PD200T384S9T
9/16" 45 PD200T454S9T

7/8"
19-1/2" -495mm
!
^ 1— ' +!Dk
* / /T\ ^
1 -3/4" =
D- ————— 3
A V
^" ' WMJt i /^OtvTll-l

2-3/4"
* B * 71mm
2-3/4 - 70mm

Tube Part
Drill Type Style Size Thread Number
FuruKawa PD200* 4 Spline 9/16" 1-1/2R PD200T1504S9HD
9/16" 38 PD200T384S9HD
*For Heavy Duty Use 9/16" 45 PD200T454S9HD

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 142
 Striking Bars

Flushing (D) (L) (B) (H) (b) Tube Part

Drill Type hole dia. Style Size Thread Number
Furukawa mm mm mm mm mm mm 6 Spline 9/1 6" 38 HD200T386S9
HD200 13 44.5 533 61 64 13.4 9/1 6" 45 HD200T456S9
HD260 13 44.5 590 80 64 13.4 9/1 6" 51 HD200T516S9
*HD300 13 44.5 655 80 64 13.4
*HD300(s) 13 44.5 655 80 64 13.4
**HD300 13 44.5 525 80 64 13.4

Tor GR300 Rod Changer

**For GR260 Rod Changer

7/1 6"
11.5mm
28" - 7 1 Omm V-\

i_ * L * W |«

n
I—— r:-:—t —————————W—uyJ %^
1-31/32" 2-7/8"
J
50mm ' "^ 73mm
3-15/16"- 100mm

Tube Part
Drill Type Style Size Thread Number
Furukawa HD500 8 Spline 5/8" 45 HD500T458SS10
5/8" 51 HD500T518SS10

*^ B |*

Flushing (D) (L) (B) (H) (b) Tube Part

Drill Type hole dia. Style Size Thread Number
Furukawa mm mm mm mm mm mm 8 Spline EXT 38 HD609T388SE
HD609 18 36 620 75 57 10 45 HD609T458SE
HD612 18 42 670 90 65 12 51 HD609T518SE
HD615 18 48 700 100 75 12.5

prices of other sizes upon request

143 D & L THOMAS EQUIPMENT CORP.
 Striking Bars

I w

*
D- Hiiii^T^T^l
^————————— . _-: .- -
^j^JLL*jJ*jJ*
4
B

Flushing (D) (L) (B) (H) (b) Tube Part

Drill Type hole dia. Style Size Thread Number
Furukawa mm mm mm mm mm mm 8 Spline EXT 38 HD609T388SEED
*HD609 18 36 795 115 57 10 EXT 45 HD609T458SEED
*HD612 18 42 845 133 65 12 EXT 51 HD609T518SEED
*HD615 18 48 880 145 75 12.5
*For the drifter equipped Quick E.D.

"X"
(44.5mm)

Tube Part
Drill Type Tangential Style Size Thread Number
Chicago Pneumatic 475 2 LUG 5/8" 1-1/4R CP475T1252L10
5/8" 1-1/2R CP475T1502L10
5/8" 38 CP475T382L10
5/8" 45 CP475T452L10
5/8" 1700 CP475T17002L10

— 1 5-3/4" (400 mm) -

3/4" 3-55/64" 2-1/4"

(98 mm) "(57.2 m mfj

I r -^ 1
1-1/2" (38.1 mm) 1-1/2" (38.1 mm)
i U t I

Tube Part
Drill Type Style Size Thread Number
Montabert - H70 4 Spline 7/16" 1-1/2R MH70T1504S7
7/16" 38 MH70T384S7
7/16" 1600 MH70T16004S7

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 144
 Striking Bars

17-1/2" -445mm

1-1/2" 1-1/2"
I

Tube Part
Drill Type Style Size Thread Number
Joy-JH2 6 Spline EXT 1-1/4R JH2T1256SE
External Flushing EXT 1-1/2R JH2T1506SE
EXT 38 JH2T386SE

15-3/4" -397mm

3-1/8" ->

1 -5/16" 1 -5/16"
I I

Tube Part
Drill Type Style Size Thread Number
Joy JH3 8 Spline EXT 1-1/4R JH3T1258SE
EXT 1-1/2R JH3T1508SE
EXT 38 JH3T388SE

Tube Part
Drill Type Style Size Thread Number
Joy JH4 Female Thread 6 Spline EXT JH4T1006SE
EXT 1-1/4R JH4T1256SE

17-3/4" -451mm

1-1/2"
I

Tube Part
Drill Type Style Size Thread Number
Tarn Rock- HL500 8 Spline EXT 1-1/2R HL500T1508SE
EXT 38 HL500T388SE

prices of other sizes upon request

145 D & L THOMAS EQUIPMENT CORP.
 Striking Bars

»fumm
i 93.3mm ,

~1
if ' (___ ) -J
-w= ——9 b—————=^

79mm

Tube Part
Drill Type Style Size Thread Number
Tamrock-HLIOOO 8 Spline EXT 45 HL1000T458SE
EXT 51 HL1000T518SE

H I - * 1 3.4mm
L— 84mm ——*4
M~ ~\,

_!_
\ 64.5mm i

,———, 16mm

Tube Part
Drill Type Style Size Thread Number
Ingersol Rand - LM500, YH65 6 Sline 3/4" 38 YH65T386S12
3/4" 45 YH65T456S12

|^— 90mm —+]

H H 12mm

\ •• _JL
52.7mm

•^
\^A——^ "" £———J T
23mm
,

Tube Part
Drill Type Style Size Thread Number
Ingersol Rand YH95 8 Spline 1" 51 YH95T518S16

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 146
 Replacement Guide
for Pavement Breaker Accessories
All tools are forged from a high carbon, shallow hard- answer to the cause. Examine the cross section of
ening tool steel and must receive proper care to in- the steel at the point of fracture and observe the
sure long life. When a tool has failed to give satis- grain structure which will very likely appear similar
factory service, visual inspection may give a quick to one of the following four examples:

Normal Hardened Structure Note the fine grain outer "case" of uniform
depth typical of high hardness for maximum strength. The interior course-
Fine Grain
grained "core" is of lower hardness which gives toughness to withstand
Coarse Grain
shock. Once this structure is disturbed, breakage is inevitable.

Evidence of "Fatigue" failure The normal structure is not disturbed but a

thumbnail crack has developed from the outer surface. Fatigue develops
from the prolonged use of dull tools or from undue prying or jacking while
operating under full air pressure. If the proper tool for the job is being
used, prying is unnecessary and harmful. Not a manufacturing defect.
Thumbnail Crack

Internal Flaw in Steel Smooth moon-like circle caused by some foreign

substance being rolled into the bar. Vary rare but replacement is in order.

Resharpening Failure Note smooth curved lines starting from outer edge
and extending partly or wholely across the surface sometimes leaving a
coarse-grained area showing complete absence of fine grain (and thus
absence of original hardness). This is the most common type of failure
Coarse Grain which usually occurs from 3" to 5" back from the point resulting from im-
proper heating during resharpening. The comparatively soft area will not
withstand the strain of continued service and breakage is inevitable. Re-
Smooth Curved Lines placement is not warranted.

Failure of Bladed Tools - Blade breakage following little use

may develop from a hidden hardening strain. The fracture is usu-
ally semi-circular and discolored. Replacement is warranted.

Mushrooming - This is caused by driving the point into a hard

dense material for too long a period of time without penetration.
This generates intense heat, softening the point, thus causing it
to fold over. Discoloration, in a blue tone, is usually evident be-
hind the mushroom. This is not a manufacturing defect.
Blue Color
Aside from the type of breakage, always check the tool to deter-
mine how much it is worn back from its original length. The best
way is to place it beside a new tool and note the difference in
length and shape. If this is not possible, measure the length
I New
under collar and check with length shown in catalog. Tools show-
ing considerable wear are not subject to replacement. Due to
their high hardness most tools may be in use several hours be-
fore showing perceptable wear.

Tools, like the human body, get tired and snap if they have been pushed too hard and too long. They are
not made to last forever.

prices of other sizes upon request

147 D & L THOMAS EQUIPMENT CORP.
 Paving Breaker Tools
Standard Moil Points Standard Narrow Chisels Standard 3" Chisels
<^c£^————————— . . , . . „ . , . ,.._|^ , .j
=0=3 L>= =u——^
Shank Length Part Shank Length Part Shank Length Part
Size U.C. Number Size U.C. Number Size U.C. Number
7/8" x 3- 1/4" 14" T11014 7/8" x 3- 1/4" 14" T12014 7/8" x 3- 1/4" 14" T13014
18" T11018 18" T12018 Furnished 18" T13018
24" T11024 24" T12024 in 2-1/2" 24" T13024
36" T11036 36" T12036 Blade Only 36" T13036
1"x4-1/4" 14" T21014 T22014 1"x4-1/4" 14" T23014
18" T21018 18" T22018 18" T23018
24" T21024 24" T22024 24" T23024
36" T21036 36" T22036 36" T23036
48" T21048 48" T22048 48" T23048
72" T21072 72" T22072 1-1/8"x6" 14" T33014
1-1/8"x6" 14" T31014 1-1/8"x6" 14" T32014 18" T33018
18" T31018 18" T32018 24" T33024
24" T31024 24" T32024 30" T33030
30" T31030 30" T32030 36" T33036
36" T31036 36" T32036 48" T33048
48" T31048 48" T32048 60" T33060
72" T31072 72" T32072 72" T33072
1-1/4"x6" 14" T41014 T42014 1-1/4"x6" 14" T43014
18" T41018 18" T42018 18" T43018
24" T41024 24" T42024 24" T43024
30" T41030 30" T42030 30" T43030
36" T41036 36" T42036 36" T43036
48" T41048 48" T42048 48" T43048
72" T41072 72" T42072 60" T43060
72" T43072

Hi Duty Moil Points Hi Duty Narrow Chisels Hi Duty 3-Inch Chisels

.
<5~<< 11 j ^^> It____3
Q
Shank Length Part Shank Length Part Shank Length Part
Size U.C. Number Size U.C. Number Size U.C. Number
14" T24014 14" T25014 1"x4-1/4" 14" T26014
18" T24018 18" T25018 18" T26018
24" T24024 24" T25024 24" T26024
36" T24036 36" T25036 1-1/8"x6" 14" T36014
48" T24048 48" T25048 18" T36018
72" T24072 72" T25072 24" T36024
1-1/8"x6" 14" T34014 1-1/8"x6" 14" T35014 1-1/4"x6" 14" T46014
18" T34018 18" T35018 18" T46018
24" T34024 24" T35024 24" T46024
30" T34030 30" T35030
36" T34036 36" T35036
48" T34048 48" T35048
72" T34072 72" T35072
1-1/4"x6" 14" T44014 1-1/4"x6" 14" T45014
18" T44018 18" T45018
24" T44024 24" T45024
30" T44030 30" T45030
36" T44036 36" T45036
48" T44048 48" T45048
72" T44072 72" T45072

Sabur Points Keen Kuts

16" T90001 1"x 4-1/4" 16" T90007

16" T90002 16" T90008
16" T90009

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 148
 Paving Breaker Tools
Asphalt Cutters Clay Spades Detachable Shanks

_>=»
\ 1
(
x

^-1———«
i— : —r=^
Shank Length Blade Part Shank Blade Part Shank Length Part
Size U.C. Size Number Size Size Number Size U.C. Number
7/8" x 3-1/4" 11" 5"x6" T10500 1"x 4-1/4" 5-1/2" x 8-1/2" T20300 7/8" x 3-1/4" 9" T11200
1"x 4-1/4" 11" 5"x6" T20500 1-1/8"x6" 5-1/2"x8-1/2" T30300 1 ' x 4-1/4" 9" T21200
1-1/8"x6" 11" 5"x6" T30500 1-1/4"x6" 5-1/2"x8-1/2" T40300 1-1/8"x6" 9" T31200
1-1/4"x6" 11" 5"x6" T40500 1"x 4-1/4" 4-1/2" x 8-1/2" T20200 1-1/4" x 6" 9" T41200
1 - 1 /8" x 6" 4- 1 /2" x 8- 1 /2" T30200
1 - 1 /4" x 6" 4- 1 /2" x 8- 1 /2" T40200
Digging Chisels Sheathing Driver Shoes
1-1/8"x6" 8" x 9- 1/2" T30400
1-1/4x6" 8" x 9- 1/2" T40400
^ P,
( *=^L^ \f^ ——)
Bushing Tools
7/8" x 3-1/4" 17-1/4" 3"x10" T10600
£)—<T"——-———m—). 2" T91502
1" x 4-1/4" 17-1/4" 3" x 10" T20600 B
^f )
^^ Jl
^ — shoes Only ——————————————————
1-1/8"x6" 16-1/2" 3"x12" T30600
3" T91503
1-1/4" x 6-1/2" 16-1/2" 3" x 12" T40600
Shank Length Part
Size U.C. Number
Brick Removing Tools 1 " Hex. x 4-1/4" 9" T21100 Dirt Tampers—
1-1/8"Hexx6" 9" T31100 Round & Square
1 -1/4" Hex. x 6" 9" T41100
^v D } 7/8" Hex x 3-1/4"
3/4" Sq. x 2-3/4"
12"
12"
T11100
T51100
3/4" Hex. Rd. x 2-3/4" 1 2" T61 1 00
1"x 4-1/4" 11-1/2" 2-1/8" x 5" T20900 7/8" Hex. x 2-3/4" 12" T71100
1-1/8" x 6" 11-1/2" 2-1/8" x 5" T30900
7/8" Hex. Rd. x 3-1/4" 12" T81100 7"RD T91607
1-1/4" x 6" 11-1/2" 2-1/8" x 5" T40900
Pads Only 6" SQ T91606
8" SO T91608

r~
Frost Wedges

£=[^^
Pneumatic Plug & Feathers

< D——c^ w= EEEE EESEEEE

^ M
Concrete Busters

7/8" x 3-1/4" 17-1/2" 1-7/8" x 12" T10700

1" x 4-1/4" 17-1/2" 1-7/8" x 12" T20700 Shank Hole Part 5 hank Size Length Part
Size Hole Unit Number |.lexagon U.C. Number
1-1/8" x 6" 17-1/2" 2" x 12" T30700
1-1/4" x 6" 17-1/2" 2" x 12" T40700 1"x 4-1/4" 1-1/2" Shank T22000 . .
7/8 x3 1/4 . . »
14 1/2 T10800

Feathers 1 X4-1/4" 14-1/2" T20800

1-1/8" x 6" 1-1/2" Shank T32000 1-1/8" x 6" 14-1/2" T30800
Asphalt Wedge Set T92200 1-1/4" x 6" 14-1/2" T40800
Feathers
1-1/4"x6" 1-1/2" Shank T42000

C^> D—— » Set

Feathers
T92200
^ Tarmac Cutter
1-1/8"x6" 2" Shank T32100
1"x 4-1/4"
1-1/8" x 6"
1-1/4"x6"
12"
12"
12"
3"x7"
3"x7"
3"x7"
T21000
T31000
T41000
1-1/4"x6" 2"
Set
rcdll Icl o

Shank
Set
T92300

T42100
T92300
C

5^wQ
Feathers
Shank Part Blade
Size Number Size
1-1/8" x 6" T30035 4-1/2"
1-1/4" x 6" T40035 4-1/2"

prices of other sizes upon request

149 D & L THOMAS EQUIPMENT CORP.
 For Clay Digger
Pipe Drivers Moil Points Clay Spade

Specify
^<
Shank
Size
7/8" Hex. x 3-1/4"
Length

14"
[B
Part
U.C. Number
T14014
\^^=%=>
( <^——— ^

Shank size pipe Part

18" T14018
Shank Blade Part
Size to be driven Number
24" T14024
Size Size Number
1"x 4-1/4" 3/4" Pipe or T21859
3/4" Sq. x 2-3/4" 14" T54014 7/8" Hex. x 3-1/4" 5-1/2" T10300
1" to 2" Pipe T21861
18" T54018 3/4" Sq. x 2-3/4" 5-1/2" T50300
1-1/8"x6" 1" to 2" or T31861
1-1/4" to 2" Pipe T31863 3/4" Hex. Rd. x 2-3/4" 1 4" T6401 4 3/4" Hex. Rd. x 2-3/4" 5-1/2" T60300
18" T64018 7/8" Hex. x 2-3/4" 5-1/2" T70300
1-1/4"x6" 1-1/4" to 2" or T41863
1-1/2" to 2" Pipe T41865 7/8" Hex. x 2-3/4" 14" T74014 7/8" Hex. Rd. x 3-1/4" 5-1/2" T80300
18" T74018 7/8" Hex. x 3-1/4" 4-1/2" T10200
24" T74024
O/H1 OL|. A c. O/H1 H \IC- \ \J\JC-\J\J
7/8" Hex Rd.x 3-1/4" 14" T84014
Pin Drivers 3/4" Hex. Rd. x 2-1/4" 4-1/2" T60200

f\—^^^
18" T84018
24" T84024 7/8" Hex. x 2-3/4" 4-1/2" T70200
7/8" Hex. Rd. x 3-1/4" 4-1/2" T80200
\yy j^^ ^
Narrow Chisels
Specify size rod or pin to be driven Clay Picks
Pin Shank Size
c^—————————^=^
ccz=
Size 1"x4-1/4" 1-1/8"x6" 1-1/4"x6" 1 ^—,____ 0 i
Part No. Part No. Part No. 7/8" Hex. x 3-1/4" 14" T15014
5/8" T21983 T31983 T41983 18" T15018
24" T15024 1 " Hex x 4-1/4" 3" T21300
3/4" T21985 T31985 T41985
3/4" Sq. x 2-3/4" 14" T55014 7/8" Hex. x 3-1/4" 3" T11300
7/8" T21987 T31987 T41987
18" T55018 3/4" Sq. x 2-3/4" 3" T51300
1" T21989 T31989 T41989
3/4" Hex. Rd. x 2-3/4" 1 4" T6501 4
1-1/4" T21991 T31991 T41991 3/4" Hex. Rd. x 2-3/4" 3" T61 300
18" T65018
1-1/2" T21993 T31993 T41993 - 7/8" Hex. x 2-3/4" 3" T71300
7/8" Hex. x 2-3/4" 14" T75014
1-3/4" T21995 T31995 T41995 18" T75018 7/8" Hex. Rd.x 3-1/4" 3" T81300
2" T21997 T31997 T41997 24" T75024
2-1/2" T21999 T31999 T41999 7/8" Hex Rd.x 3-1/4" 14" T85014
18" T85018 Railroad Spike Driver
24" T85024

Ground Rod Driver

3-Inch Chisels
i )l ) -I
Shank Part
Size Number
3" depth hole D
u— ^
3^3
7/8" x 3-1/4" T41850
Shank Rod Socket Part 1"x 4-1/4" T41851
Size Size Diameter Number 7/8" Hex. x 3-1/4" 14" T16014 1-1/8"x6" T41852
1"x 4-1/4" 5/8" 11/16" T22783 18" T16018 1-1/4"x6" T41853
3/4" 13/16" T22785
3/4" Hex Rd. x 2-3/4" 1 4" T5601 4
7/8" 1" T22787
1" 1-1/8" T22789 18" T56018
1-1/8"x6" 5/8" 11/16" T32783 3/4" Hex. Rd. x 2-3/4" 1 4"
18"
T6601 4
T66018
Sign Post Driver
3/4" 13/16" T32785
7/8" 1" T32787 7/8" Hex. x 2-3/4" 14" T76014
1" 1-1/8" T32789 18" T76018
a=(r\~~\ ^
1-1/4"x6" 5/8" 11/16"
3/4"
7/8"
13/16"
1"
T42783
T42785
T42787
7/8" Hex Rd.x 3-1/4" 14"
18"
T86014
T86018
QLj«*=
1" 1-1/8" T42789 Shank Part
Size Number Weight
1-1/8"x6" T34006 8-3/4
1-1/4"x6" T44006 8-1/2

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 150
 Chipping Hammer Tools
COLLARED COLLARED UNCOLLARED

USN Hex - Oval Collar USN Hex - Round Collar USN RD - Oval Collar USN RD - Round Collar USN Hex USN Round

Collared Chisel Blanks Collared Bushing Tool Chisel Blanks

Part
If ^d

Part
IL/—
3 ^——
It

Part
1
Part
Length Number Number Face size 1-3/4" x 1-3/4" Stock Size and Number Number
Shank O.A. RD. Collar Ov. Collar With Length O.A. RD. HX.
Rd. 8-1/2" T01 H08 T01J08 Shank Length Part Carbide
Collar O.A. Number Insert 3/4 " x 8-1/2" T01C08 T01A08
Hex. 8-1/2" T01 F08 T01G08 3/4 " x 11-1/2" T01C11 T01A11
USN RD. 8-1/2"OA T07DOO
Rd. 11-1/2" T01H11 T01J11 3/4 "X17-1/2" T01C17 T01A17
USN Hex. 8-1/2"OA T07BOO
Hex. 11-1/2" T01F11 T01G11 7/8 " x 8-1/2" T01 DOS T01 608
USN Rd. - 9-3/4" OA T07HOO T17HOO
Rd. 17-1/2" T01H17 T01J17 Rd. Collar 7/8 " x 11-1/2" T01D11 T01B11
Hex. 17-1/2" T01F17 T01G17 USN Rd. - 9-3/4" OA T07JOO T17JOO 7/8 " x 17-1/2" T01D17 T01B17
Oval Collar
USN Hex. - 9-3/4" OA T07FOO T17FOO
Collared Moil Points Rd. Collar Moil Points
USN Hex. - 9-3/4" OA T07GOO T17GOO
3- ' Oval Collar —=)—__J
Rd. 9" T02H09 T02J09 3/4 " x 9" T02C09 T02A09
Hex. 9" T02F09 T02G09 3/4 " x 1 2 " T02C12 T02A12
Rd. 12" T02H12 T02J12 3/4 "x18" T02C18 T02A18
Hex. 12" T02F12 T02G12
Collared Scaling Chisel 7/8 " x 9" T02D09 T02B09
Rd. IS- T02H18 T02J18 r^——_ 7/8 " x 1 2 " T02D12 T02B12
Hex. IS" T02F18 T02G18 o— ——U——
7/8 " x 1 8 " T02D18 T02B18
Part Part
Length Width & Number Number
Collared Flat Chisels O.A. Collar RD. Hx.
Flat Chisels
cr=^_ Q"

9"
1-1/2"Rd.
1-1/2"0v.
T09H09
T09J09
TOQFOQ

T09G09
—————I ,.._ J

Rd. 9" T03H09 T03J09 12" 1-1/2"Rd. T09H12 T09F12 3/4 " x 9" T03C09 T03A09
Hex. 9" T03F09 T03G09 12" 1-1/2"0v. T09J12 T09G12 3/4 " x 1 2 " T03C12 T03A12
Rd. 12" T03H12 T03J12 IS- 1-1/2"Rd. T09H18 T09F18 3/4 "x 18" T03C18 T03A18
Hex. 12" T03F12 T03G12 IS" 1-1/2"0v. T09J18 T09G18 7/8 " x 9" T03D09 T03B09
Rd. 18" T03H18 T03J18 9" 2" Rd. T11H09 T11F09 7/8 " x 1 2 " T03D12 T03B12
Hex. 18" T03F18 T03G18 9" 2" Ov. T11J09 T11G09 7/8 " x 1 8 " T03D18 T03B18
12" 2" Rd. T11H12 T11F12
12" 2" Ov. T11J12 T11G12
Collared Cape Chisels 18" 2" Rd. T11H18 T11F18
Cape Chisels
Rd. 9" T04H09 T04J09 18" 2" Ov. T11J18 T11G18 G^^ r==3
Hex. 9" T04F09 T04G09 9" 2-1/2" Rd. T12H09 T12F09
9" 2-1/2"Ov. T12J09 T12G09 3/4 " x 9" T04C09 T04A09
12" 2-1/2" Rd. T12H12 T12F12 7/8 " x 9" T04D09 T04B09
Collared Round Nose Chisels 12" 2-1/2"Ov. T12J12 T12G12
Rd. 9" T05H09 T05J09 18" 2-1/2" Rd. T12H18 T12F18 Round Nose Chisels
Hex. 9" T05F09 T05G09 18" 2-1/2"Ov. T12J18 T12G18
9" 3" Rd. T14H09 T14F09 ^——'
3"0v. T14J09 T14G09
Collared Diamond Point Chisels 3/4" x 9" T05C09 T05A09
7/8" x 9" T05D09 T05B09
Rd. 9" T06H09 T06J09
Hex. T06F09 T06G09

prices of other sizes upon request

151 D & L THOMAS EQUIPMENT CORP.
 Hammer Tools
UNCOLLARED UNCOLLARED UNCOLLARED

Bull Points or 3" Chisel Diamond Pt. Chisels

Flat Chisels r-\
=^-_r——— r =& ^ Part Part
j ~~T————— —— ————f~ izi- 4 Stock Size and Part Stock Size and Number Number
Length U.C. Number Length O.A. Round Hex
Stock Size and Number Number ————————————————————————
Length O.A. Point Chisel 1 -1/4" x 20-1/2" T43016 3/4" x 9" T06C09 T06A09
3/4" x 12" T11012 T12012 7/8" x 9" T06D09 T06B09
3/4" x 20" T11020 T12020

Asphalt Cutter Caulking Tools

Bull Points c>r
Narrow ChiseJ^ I L___}———— i
Stock Size/ Width
Blade of
Thickness Blade
1—— "re——— 1 l/t A l l 1 tUOUU
7/8" x 1/4" 1-1/4" T15D88 T15B88
1-1/8"x16" T31016 T32016 7/8" x 3/8" 1-1/4" T15D89 T15B89
1 -1/8" x 20-1/2" T31020 132020 7/8" x 1/2" 1-1/4" T15D90 T15B90
COLLARED

3" Chisel
> 3" Chisel Scaling Chisels
.^ "
1
—^
"^——^——J
————
l >———— —- ^
n——~s_
L=^——————— j— - x
1 -1/8" x 20-1/2" T33020 ——\ j
1-1/8"x14" T83014

Length Blade
Asphalt Cutte3r Asphalt Cutter
O.A. Width
9" 1-1/2" T09D09 T09B09

J____ r - -^ 12" 1-1/2" T09D12 T09B12

<^_ '—« 3——) ^^—— - —^^^~n 18
" 1
" 1/2 " T09D18 T09B18
f L f ^
9" 2" T11D09 T11B09
12" 2" T11D12 T11B12
1-1 /8"x 11" T30500 18" 2" T11D18 T11B18
1-1/8"x11" T90500
9" 2-1/2" T12D09 T12B09
12" 2-1/2" T12D12 T12B12
18" 2-1/2" T12D18 T12B18
Bull Points or 9" 3" T14D09 T14B09
Narrow Chisels
C_J> '==^
^
[ ^> r. • • )

Stock Size and Part Part

Length U.C. Number. Number
1-1/8"x14" T81014 T82014
1-1/8"x18" T81018 T82018

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 152
Heavy-duty, Boom Mounted
HYDRAULIC BREAKERS
Power, reliability and efficiency in an extremely reliable, low vibration unit.

CP-250H1

BREAKER SPECIFICATIONS
Weight with Max energy Impact Length Working Hydraulic Hose
adapter plate per blow Rate without pressure oilflow diameter
Type and chisel ft.-lb. chisel at breaker rate
Ib. (J) in. psi US gal/min in.
(kg) */t Hz (mm) (bar) (l/min) (mm)
CP-75H 176 205/ 75 10-25 32.7 1450-2175 3.0-8.2 1
/2
(80) (275/ 110) (830) (100-150) (11.5-31) (12.5)
CP-100H 243 300/ 150 8-21 34.3 1450-2175 4.0-9.2 1
/2
(110) (400/ 200) (870) (100-150) (15-35) (12.5)
CP-250H1 606 850/ 420 5-15 44.3 1450-2175 6.6-18.5 3
/4
(275) (11 507 565) (1125) (100-150) (25-70) (19)
CP-250H2 606 4807 237 10-25 44.3 1450-2175 6.6-17.7 3
/4
(275) (650/ 320) (1125) (100-150) (25-67) (19)
CP-600H 1389 1590/ 815 6-12 56.7 1450-2175 13.7-27.7 1
(630) (2150/1100) (1440) (100-150) (52-105) (25)
CP-700H 1675 2260/1260 4-9 62.6 1450-2030 14.5-31.7 1
(760) (3050/1700) (1590) (100-140) (55-120) (25)
CP-900H 1918 2260/1260 4-9 62.6 1450-2030 14.5-31.7 1
(870) (3050/1700) (1590) (100-140) (55-120) (25)
CP-1400H 3000 3320/1855 4-10 72.8 1450-2320 21.1-47.6 11/4
(1360) (4480/2500) (1850) (100-160) (80-182) (32)
CP-1800H 4189 4890/2730 4.4-8 78.0 1450-2320 29.1-52.8 11/4
(1900) (6600/4000) (1980) (100-160) (110-200) (32)
CP-2000H 4850 4890/2730 4.4-8 78.0 1450-2320 29.1-52.8 11/4
(2200) (6600/4000) (1980) (100-160) (110-200) (32)
'Impact energy calculated on the input power. flmpact energy measured at tool tip.

prices of other sizes upon request

153 D & L THOMAS EQUIPMENT CORP.
 Hydraulic Breakers
Tool types
1. Narrow chisel
2. Moil point
3. Wide Chisel
4. Wide chisel indexed 90°
5. Blunt tool
6. Asphalt cutter
7. Asphalt cutter indexed 90°

CP QUALITY TOOLS
From soft rock and asphalt cutting
to hard rock demolition, Chicago
Pneumatic has the right tool for
your job. Each one is made of high-
strength forged steel, and is de-
signed to enhance the efficiency
and reliability of your hydraulic
breaker.

TOOL SPECIFICATIONS
Type Tool Tool width Total length Shank length Shank size Weight
type in. (mm) in. (mm) in. (mm) in. (mm) Ib. (kg)
CP-75H 1 1.77 45 21.65 550 7.88 200 1.77 45 11.0 5
CP-100H 2 — 21.65 550 11.0 5
2 — 27.56 700 17.6 8
3 3.15 80 21.65 550 11.0 5
4 3.15 80 21 .65 550 11.0 5
6 5.90 150 18.90 480 15.4 7
7 5.90 150 18.90 480 15.4 7
CP-250H1 1 3.15 80 31 .50 800 14.57 370 3.15 80 59.5 27
CP-250H2 2 — 31.50 800 59.5 27
2 — 39.37 1000 86.0 39
2 — 55.12 1400 130.0 59
3 5.90 150 31.50 800 59.5 27
3 5.90 150 35.43 900 66.1 30
4 5.90 150 31.50 800 59.5 27
5 — 31 .50 800 66.1 30
CP-600H 1 4.13 105 35.43 900 14.96 380 4.13 105 132.3 60
CP-700H 1 4.13 105 43.31 1100 145.5 66
CP-900H 2 — 35.43 900 132.3 60
2 — 47.24 1200 187.4 85
3 7.09 180 35.43 900 132.3 60
3 7.09 180 43.31 1100 136.7 62
4 7.09 180 35.43 900 132.3 60
5 — 35.43 900 132.3 60
6 11.81 300 35.43 900 132.3 60
7 11.81 300 35.43 900 132.3 60
CP-1400H 1 4.92 125 39.37 1000 18.11 460 4.92 125 209.4 95
2 — 39.37 1000 209.4 95
5 — 39.37 1000 209.4 95
CP-1800H 1 5.31 135 43.31 1100 18.90 480 5.31 135 253.5 115
CP-2000H 2 — 43.31 1100 262.3 119
5 — 39.37 1000 249.1 113

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 154
Boom Mounted Demolition Tools BRUNNCR & LRV

APPROX. OVERALL HAMMER BRUNNER NUMBER

MODEL NO.
DIAMETER LENGTH MANUFACTURERS NO.
POINT CHISEL
WEIGHT CHISELS
POINT CHISEL
*=Corresponding
Hy Ram 75 3-1/4" 30" TA03P30 TA03*30 70
Hy Ram 77 3-1/4" 32" 657705 657706 TA04P32 TA04*32 67
Letter X or C
Krupp 200 37" 657708 657709 TA04P37 TA04*37 80
Hy Ram 88 33" 658810 658806 TA06P33 TA06*33 105 You are looking from
Krupp 600 39" 658804 658808 TA06P39 TA06*39 126 the driver's seat
Hy Ram 700 1-3/4" IS- 677015 677016 TA11P18 TA11*18 11
Krupp 50 Retaining
Hy Ram 710 2-3/16" IS" 677108 677107 TA13P18 TA13*18 19 Pin facing
Krupp 60
Hy Ram 71 5 28" TA19P28 TA19*28 36
or away
Hy Ram 720 2-3/4" 24" 667205 667206 TA12P24 TA12*24 33 from
Krupp 110 30" TA12P30 TA12*30 42
Hy Ram 730 3-1/4" 32" 657315 657316 TA22P32 TA22*32 61
Krupp 300 36" 657310 657518 TA22P36 TA22*36 70
Hy Ram 740 33" 657415 657416 TA24P33 TA24*33 96
Krupp 550 39" 657420 657418 TA24P39 TA24*39 120
Hy Ram 750 4-1/2" 39" 667505 667506 TA14P39 TA14*39 150
Krupp 550 45" 667510 667508 TA14P45 TA14*45 176
Hy Ram 750B 4-1/2" 39" 659905 659906 TA15P39 TA15*39 150
Hy Ram 750CS 45" 659908 TA15P45 TA15*45 176
Hy Ram 770 5-1/4" 44" 659305 659306 TA16P44 TA16*44 240 Retaining
Krupp 900 49" 659307 659308 TA16P49 TA16*49 270 Pin facing
Hy Ram 770B 5-1/4" 44" 659905 659906 TA17P44 TA17*44 235
Krupp 950 49" 659907 659908 TA17P49 TA17*49 265
Hy Ram 780 5-7/8" 46" 677803 677804 TA28P46 TA28*46 295
Krupp 1300
Rapid Ram 33 2-3/4" 24" 653305 653306 TA02P24 TA02*24 34
Ho Ram 250 3-1/2" 32" 634005 634006 TA08P32 TA08*32 76
Ho Ram 300 3-1/2" 31" 634305 634306 TA26P31 TA26*31 75
Ho Ram 7000B 29" 617305 617306 TA20P29 TA20*29 101
36" 617405 617406 TA20P36 TA20*36 118

KB 555 2-1/2" so- 7619 7617 TB02P30 TB02*30 38

Retaining R1 ,
KB 555 3" so- 6776 6778 TB04P30 TB04*30 60 Pin tothe ™ „,
ParaM
KB 999 2537 2543 TB06P30 TB06*30 74 Right
3-1/2" 36" 7146 7383 TB06P36 TB06*36 90
48" 2545 7145 TB06P48 TB06*48 122
KB 2000 5-1/4" 48" 7529 7533 TB08P48 TB08*48 280
KHB 100 2" 19" 10163 10161 TB10P19 TB10*19 17
KHB200 2-3/4" 24" 10263 10261 TB12P24 TB12*24 40
KHB 400 3-3/4" 32" 10504 10502 TB14P32 TB14*32 100
KHB 700 4-1/4" 36" 10776 10775 TB16P36 TB16*36 144
KHB 1100 5-1/4"" 42" 11126 11128 TB18P42 TB18*42 250
KHB 1500 5-1/2" 48" 11591 11590 TB20P48 TB20*48 315
2-G 18" TB23P18 TB23*18
3-G 23" TB25P23 TB25*23 Retaining
5-G 3" 25" TB30P25 TB30*25 59 Pin to the Blade
8-G 29" TB35P29 TB35*29 Right In-Line
or
Left

360V 2-1/2" 23" TR02P23 TR02*23 28

prices of other sizes upon request

155 D & L THOMAS EQUIPMENT CORP.
BRUNNCR & LRV Boom Mounted Demolition Tools

TlRAMAC - MONTABERT
TOO1 CTWC*
i • kkw
rk W 1 APPROX. OVERALL HAM MER BRUNNER NUMBER
MODEL NO. MANUFACTlJRERS NO. WEIGHT
DIAMETER LENGTH POINT CHISEL
POINT CHISEL
BRH 40 1 -3/4" 20" 46472 46474 TC04P20 TC04*20 11
BRH 75/90 2-1/2" 23" 55488 55490 TC16P23 TC16*23 25
Z96 2-3/8" 28" 17552 TC02P28 TC02*28 32
36" TC02P36 TC02*36 40
BRH 125 3-1/8" 26" 36481 36482 TC02P26 TC06*26 43
32" 36554 TC06P32 TC06*32 60
37" TC06P37 TC06*37 78
s ^•••^
1 BRH 250/400 3-3/4" 34"
39"
23987 23990 TC08P34
TC08P39
TC08*34
TC08*39 94
BRH 501 4-1/2" 39" 26132 26136 TC10P39 TC10*39 158
BRH 620 4-1/2" 39" 62299 62301 TC18P39 TC18*39 158
BRV 950 43" TC20P43 TC20*43
50" TC20P50 TC20*50
BRH 750 4-3/4" 44" 57664 57665 TC12P44 TC12*44 180
BRH 1100 5.3" 52" 51836 51837 TC14P52 TC14*52 300

^ STANLEY - *MELROE

MB 125 1 -3/4" 17" TN01P17 TN01*17 11

c:HISEL *1250
MB 250 2-1/2" 22" TL02P22 TL02*22 27
*2500
MB 550 2-3/4" 28" TL04P28 TL04*28 42
*5500
t=^ MB 800 3-1/8" 30" TN28P30 TN28*30 60
1 MB 1200 4" 36" TN08P36 TN08*36 115
MB 1850 4-1/2" 41" TN10P41 TN10*41 170
MB 2850 5-1/8" 41" TN12P41 TN12*41 213
MB 3900 5-1/2" 49" TN18P49 TN 18*49 337

TELEDYNE CM

TB 100 2" 12" TQ10P12 TQ10*12 10

TB 1 20/1 25 2" 19.5" TQ12P20 TQ12*20 17
TB 1 80/225 2-1/4" 23.5" TQ18P24 TQ18*24 26
TB 220/325 3" 30" TQ22P30 FQ22*30 60
TB 400/425 3-3/4" 32" TQ40P32 TQ40*32 96
400X/425X
TB 700/725 4-1/2" 36" TQ72P36 TQ72*36 162
700X/725X
750X/825X
TB 900/925 5-3/8" 46" TQ90P46 TQ90*46 275
950X/1 025X
TB 13007 5-3/4" 48" TQ130P48 FQ1 30*48 352
cRISE;L 1425X

l^^^^^^l ROXON
If the Hammer
Manufacturer or TR 100 2-1/16" 22" 100KOP1 100KOP4 TE16P22 TE16*22 16
Hammer Model TR 200/200X 3" 29" 200KOP1 200KOP4 TE02P29 TE02*29 50
does not appear in TR 400/400X 3-1/2" 33" 400KOP1 400KOP4 TE04P33 TE04*33 77
this catalog, TR602M/602X 4" 36" 5450136 5450137 TE06P36 FE06*36 115
Call your local TR 700/700X 4.3" 36" 5450166 5450167 TE08P36 TE08*36 121
Brunner & Lay TR 800/800X 5-1/2" 40" 800KOP1 800KOP2 TE10P40 TE10*40 245
warehouse for
assistance. VI'ORTHINGTON
1 T500 2-3/4" 27" PNT-18 PNT-21 TD02P27 TD02*27 38
| T1000 3-3/4" 35" PNT-12 PNT-16 TD04P35 TD04*35 97

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 156
Boom Mounted Demolition Tools BRUNNCR & LRV

HAMMER BRUNNER NUMBER

MANUFACTURERS NO.
POINT CHISEL
POINT CHISEL

prices of other sizes upon request

157 D & L THOMAS EQUIPMENT CORP.
 Overburden drilling
Overburden drilling can be carried out with rotary drills using roller
bits or auger bits, and with DTH-drills and top hammers.
To prevent loose material from caving in and blocking up the hole a
casing consisting of tubes can be passed down into the hole as
drilling proceeds. This casing method can only be used with DTH-
drills and top hammers, and the equipment needed is described on
this page. The equipment allows drilling to be continued in solid
rock after the overburden has been penetrated.
ODEX is available both for top hammers and for down-the-hole drills.
When drilling with top hammers, a high-torque drill, such as BBE 57
or BBE 53, must be used. The casing tube is pressed down without
rotation with the aid of vibrations from the drill and through its own
weight.

The ODEX principle

During drilling the eccentric reamer swings out and produces a hole
which enables the casing to be pressed down without rotation. When
drilling is finished, the equipment is rotated a couple of revolutions
in the opposite direction, whereupon the reamer is folded in and
enables the inner equipment to be retracted through the casing. If
drilling is to be continued in solid rock, the ODEX bit is replaced by
an ordinary drill bit and drilling proceeds with only extension equip-
ment or with down-the-hole equipment through the casing.

Casing
Either threaded tubes or weldable tubes of an ordinary commercial
grade of steel are used as the casing. When the tubes are left in the
hole, e.g. in water-well drilling, welded tubes are customarily used.
Threaded tubes are used for such applications as blast hole drilling,
anchoring and grouting, when the tubes will be withdrawn from the
hole and used again. When the tubes are to be pulled out, the
driving cap and adapter sleeve, if any, are replaced by a tube lifter,
which is threaded onto the extension equipment.

Grouting
When ODEX equipment is used for grouting, the cement is injected
through the casing, which is withdrawn successively as the grouting
proceeds. The cement is pumped in through a special injection
sleeve, which is fitted in place of the driving cap.

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 158
ODEX 76 Threaded Overburden drilling
Description Part No.
1. Shank adapter For BBE 57 7804-7505-01

2. Flushing device
Hose connection 1" 7801-0001-00
Packings (2 pcs) 0795-1806-00
3. Shock absorber package
Spacer 8484-0140-54
Cup springs (3 pcs) 80 x 40 x 5 mm 8484-0140-53
4. Driving cap 8484-0211-57

0 5. Outlet bend for 2-1/2" hose 8484-0211-59

6. Adapter sleeve 7989-1510-01

7. Casing tubes 88.9 x 77.8 mm, threaded
Length 1220 mm 4ft 8484-0140-00
3050mm 10ft 8484-0140-02

8. Coupling sleeve 7994-3655-00

9. Extension rods R38-1-1/2" Rope

Length 1220 mm 4ft 7854-4312-30
3050 mm 10ft 7854-4331-30

10. Wing coupling 7994-3076-00

11. Extension rod R38 -1-1/2" Rope
Length 280 mm 11 in 7854-4302-20

12. Guide device 7989-4076-00

16 13. Reamer, diameter 96 mm 3-25/32" 7588-5096-40
14. Pilot bit, diameter 70 mm 2-3/4" 7588-4070-40
15. Tube lifter 7989-1502-01
16. Grouting device 7989-1509-00
Wrenches for
Extension rods, short shaft 0795-9063-00
Extension rods, long shaft 0795-9093-00
Grouting device and tube lifter 8484-0211-02
Guide device 8484-0211-60
Pilot bit 8484-0211-42
Adapter sleeve 8484-0211-62
Before assembling the equipment, cut the female thread 50
mm (2") on the first casing tube. The following casings and
extension rods should have equal lengths.
Further instructions are available in separate leaflet.

prices of other sizes upon request

159 D & L THOMAS EQUIPMENT CORP.
ODEX 115 Threaded Overburden drilling
Description Part No.
1. Flushing cap 076mm 7989-1680
2. Outlet bend for 2-1/2" hose 7982-0001
3. Thread saver 7989-1601-02
4. Drill rods (API 2-3/8" Reg.)
0 76 mm, length 1500 mm 4' 11" 8393-0702-09
0 76 mm, length 3000 mm 9' 10" 8393-0701-00
5. Casing tubes, threaded
length 1500 mm 4' 11" 8484-0140-08
3000 mm 9' 10" 8484-0140-10
6. Guide sleeve diam. 127 mm 7989-1627-01
7. Down-the-hole rock drill, COP 4
8. Bit tube 7985-1607-02

The following casings and extension rods should have equal

lengths.

9. Guide device for COP 4 7989-4115-42

10. Reamer diameter 152 mm 6" 7588-5152-40
11. Pilot bit diameter 110 mm 4-5/16" 7588-4110-40
6
Tube lifter 7989-1602-02
(For illustration, see customer price list)

Wrenches for
Guide sleeve 8484-0211-06
Pilot bit 8484-0211-17

Note: Unthreaded casings and bit tubes for welding also

available on special request.

10
11

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 160
 OD72 Overburden Drilling Equipment

Shank Adapter
1.50 Rope Central Flushing
Ring Bit

L 20-1/2"
No: ECB57

d - 2-7/8"
ii
d D No: ERB 72

Part No.
D - Dia: 4-7/32" TODRB422
Dia: 4-1/2" TODRB450

Extension Tube
Thread With 3 Entrances Coupling Sleeve

II L 3-15/16"
t
D [" D 2-27/32"
|_1 No: ECS 72

Part No.: D-4-1/16" No. EBT

TODET10 L-9'8-1/8" 98 Part No.:
TODET5 4'9" 49 TODCS
TODET 2' 20

38 or 45 Thread Adapter Coupling

Part No.:
TODAH38
TODAH45

prices of other sizes upon request

161 D & L THOMAS EQUIPMENT CORP.
 3505 JILLANDA DRIVE
JO I]
NO. CHARLESTON, SC 29418
CRAWLER TRACTOR PARTS
* Heavy Duty Sealed Track Chains
& SPARES for
* Lifetime Bottom & Top Rollers
* Grouser Shoes Caterpillar Komatsu
* Roller Shells John Deere J.I. Case
* Sprockets & Rims International Fiat-Allis
* Idler Groups
Track Drills
LARGE INVENTORY ON HAND
AT COMPETITIVE PRICES Ingersoll Rand / Sullivan / Sullair
Gardner Denver / Reedrill
ATD3700&3100
Pavers
Gomaco / CMI / Barber-Greene
EXCAVATOR PARTS
Bantam - Koehring Bucyrus - Erie
Case FMC - Link Belt
Caterpillar Harnischfeger - P & H
Insley John Deere
Liebherr Hein Werner
American-Amhoist Orenstein & Koppel
Poclain

SHOVEL & CRANE PARTS AVAILABLE

I - TRACK ITM
COMPLETE REPINNING
AND
Call Us For Your Undercarriage Needs REBUSHING WORK
Charleston, S.C.
REPLACEMENT PARTS FOR
(803) 552-4166 / (803) 763-9056 Eve.
O.E.M. AND EXPORT INQUIRES WELCOME * Track Rollers

FAX (803) 552-2521 * Idlers

TOLL FREE NUMBER * Tension Devices
(800)245-2136 * Track Chains

prices of other sizes upon request

D & L THOMAS EQUIPMENT CORP. 162
 ^ CD
W^mMiM^m^j^^^^^^Mi^^^^m^Mf':

prices of other sizes upon request

163 D & L THOMAS EQUIPMENT CORP.
 ————————— D375Q7JD, D375QH7JD

* 108 rail & 127

Air TUrn, Tail
* Tiros Air
* 0 to 100%
* Dry Air -
* 3WT
* Oil
* by
*
*
» for Of

*
*
* of or BaH
on
* pyll
cm
*
* to of 78 at
7

.»* * te ^^M^S
prices of other sizes upon request
D & L THOMAS EQUIPMENT CORP. 164