REFERENCES

GENERAL NOTES

LEGEND

Wall Mounted Type AC Indoor Unit

Outdoor for Wall mounted Type AC Indoor Unit
Tower Type AC Indoor Unit
Outdoor for Tower Type AC
Typical detail Gravel Pit Exhaust Air Valve
Flexible Duct
NTS Exhaust Air Duct
Duct reducer
Duct Tee/Taps
AC Condensate to Grave Pit.
Refrigerant pipes, Liquid and gas
see detail
AC Condensate pipes

OU-001
90,000 BTU/H AC Condensate to Grave Pit. HVAC NOTES
AC Condensate to Grave Pit. Power Input = 9500 W OU-002
see detail Height= 50FFL 90,000 BTU/H
see detail
1. APPLICABLE CODES INCLUDE, BUT ARE NOT LIMITED TO, THE LATEST
Power Input = 9500 W OU-004
Height= 50FFL OU-003 90,000 BTU/H
ADOPTED VERSION OF:
AC Condensate to Grave Pit. 90,000 BTU/H Power Input = 9500 W
Power Input = 9500 W Height= 50FFL • 2006 IBC INTERNATIONAL BUILDING CODE
see detail TERRACE 03
01.027 Height= 50FFL • 2006 IMC INTERNATIONAL MECHANICAL CODE
Condensate Pipe sleeve in
foundation slab
Condensate Pipe sleeve in
foundation slab EF-001 • 2002 NFPA 90A AIR CONDITIONING AND VENTILATION CODE
80m3/h EF-002 • 2006 NFPA 90B AIR CONDITIONING AND VENTILATION CODE
Power Input = 22 W 1000 m3/h 100Pa • 1995 SMACNA HVAC DUCT CONSTRUCTION MATERIALS
Height= 3000FFL Power Input = 180 W
Condensate Pipe sleeve in Height= 3200FFL 2. HVAC SYSTEM SHALL BE INSTALLED COMPLETE WITH ALL WORK,
foundation slab Condensate Pipe sleeve in
foundation slab
MATERIALS, AND EQUIPMENT CUSTOMARILY CONSIDERED PART OF SUCH WORK FOR
1 FULLY OPERATIONAL, COMPLETE AND CODE COMPLIANT SYSTEMS. PROVIDE AND INSTALL
ALL EQUIPMENT, DUCTING, DIFFUSERS, LOUVERS, GRILLES, ETC. AS REQUIRED.

150
IU-004
90,000 BTU/H FWC 03

Power Input = 9500 W

01.012 3. PLANS ARE DIAGRAMMATIC AND ARE PROVIDED ONLY TO SHOW GENERAL SYSTEMS.
Height= 50FFL CONTRACTOR SHALL CONSIDER ACTUAL FIELD CONDITIONS DURING INSTALLATION ANY
GROSS INTERFERENCE SHALL BE BROUGHT TO THE ATTENTION OF THE ENGINEER
BEFORE CONTINUING.
FWC 02
F. WC
01.009
01.011
4. PLAN SCALES NOTED, IF ANY, ARE ONLY APPLICABLE TO PLANS PLOTTED AT FULL SIZE.
CONTRACTOR IS CAUTIONED WHEN USING PLANS PLOTTED AT REDUCED SIZES.
IU-001 IU-002 IU-003 250ø
90,000 BTU/H 90,000 BTU/H 90,000 BTU/H 3355 FFL
REGARDLESS, CONTRACTOR SHALL NOT SCALE PLANS, BUT SHALL REFER TO NOTED
Power Input = 9500 W Power Input = 9500 W Power Input = 9500 W DIMENSIONS. FOR DIMENSIONS NOT NOTED, CONTRACTOR SHALL REFER TO ACTUAL
Height= 50FFL Height= 50FFL Height= 50FFL FIELD CONDITIONS AND/OR DIMENSIONED ARCHITECTURAL, STRUCTURAL, OR CIVIL
PLANS.
Exhaust Duct
STAIR HALL
01.002 5. SUBMITTAL REQUIREMENTS: CONTRACTORS SHALL PREPARE AND SUBMIT TO THE
ENGINEER FOR REVIEW AND APPROVAL DETAILED PRODUCT INFORMATION ON ALL
TERRACE 02
01.026 EQUIPMENT PROPOSED FOR USE. SUBMITTAL SHALL BE PROVIDED AND ENGINEER SHALL
REVIEW AND APPROVE, PRIOR TO EQUIPMENT PURCHASE. CONTRACTOR SHALL REVIEW
AND CERTIFY BY SIGNATURE THAT SUBMITTED EQUIPMENT MEETS SPECIFICATION.
A' 150ø
CONTRACTOR SHALL BE RESPONSIBLE FOR ALL DIMENSIONS, FITTING, AND
CONSTRUCTION FEATURES RELATIVE TO EQUIPMENT. APPROVAL OF SUBMITTAL
3355 FFL
INFORMATION BY THE ENGINEER DOES NOT RELIEVE THE CONTRACTOR'S OBLIGATION TO
PROVIDE CODE COMPLIANT SYSTEMS.
LOBBY
01.004

6. ALL SERVICEABLE EQUIPMENT, VALVES, UNIONS, FIRE DAMPERS, CONTROLS, ETC.

SHALL BE INSTALLED IN ACCESSIBLE LOCATIONS.
MWC 01
01.007

7. LOCATE AND INSTALL ALL EQUIPMENT CONSIDERING MANUFACTURERS CLEARANCES,

CV1
013.2.026
MANUFACTURERS INSTALLATION INSTRUCTIONS, AND LISTING AGENCY CERTIFICATIONS.

8. VERIFY ALL ELECTRICAL REQUIREMENTS WITH EQUIPMENT MANUFACTURERS.

MWC 02
2 COORDINATE WITH ELECTRICAL CONTRACTOR.
01.008

9. FIRE STOPPING SYSTEM SHALL BE INSTALLED AT ALL PENETRATIONS THROUGH FIRE

RATED WALLS, CEILINGS OR CONSTRUCTION
L 3 10. PROVIDE AND INSTALL ALL HANGERS AND SUPPORTS PER CODE AND SMACNA
RECOMMENDATIONS.

11. THERMOSTATS SHALL BE PROGRAMMABLE TYPE COMPATIBLE WITH MECHANICAL

EQUIPMENT SERVED.

12. ALL DUCT WORK DIMENSIONS SHOWN ARE INSIDE CLEAR. FABRICATE DUCT SO TO
MAINTAIN CLEARANCE SPECIFIED. INTERNALLY LINED DUCTS SHALL BE OVERSIZED SO TO
ACCOMMODATE THICKNESS OF INSULATION.

STORE 02
13. SUPPLY, RETURN, AND OUTSIDE AIR DUCTWORK SHALL BE GALVANIZED SHEET METAL
01.024
WITH INSULATION AS NOTED ON THE PLANS AND MATERIALS SCHEDULES.
- - 14. LOCATE ALL CEILING MOUNTED REGISTERS, GRILLES, DIFFUSERS, FANS, ETC. PER
REFLECTED CEILING PLAN. COORDINATE WITH ELECTRICAL AND FINISH CEILING
INSTALLATION.
MAIN HALL - 776 SEATS

4
01.022

15. ALL TRANSVERSE JOINTS TO BE SEALED WITH APPROVED DUCTSEALER.

16. TURNS IN DUCTWORK SHALL HAVE 1.5 MINIMUM RADIUS RATIO WHENEVER POSSIBLE,
OTHERWISE TURNING VANES SHALL BE INSTALLED WITHIN DUCT.

IU-010 17. EVERY SUPPLY DIFFUSER SHALL BE INDIVIDUALLY CONTROLLED BY A DAMPER PLACED
24,000 BTU/H ENTRANCE

- AT THAT DIFFUSER'S SUPPLY DUCT TAKEOFF

RECEPTION 01
Power Input = 2300 W
01.003
01.001
AC Condensate to Grave Pit. -
Height= 2600FFL see detail
18. INSTALL FLEXIBLE VIBRATION ISOLATION DUCT SECTIONS AT BOTH SUPPLY AND
IU-009
24,000 BTU/H
RETURN DUCT CONNECTIONS TO THE FURNACE / AIR HANDLER.
Power Input = 2300 W MEDIA ROOM

Height= 2400FFL
01.021
19. ALL OUTDOOR AIR INTAKE LOUVERS SHALL BE 3.5m MINIMUM DISTANCE AWAY FROM
SEWER OR COMBUSTION EXHAUST VENTS.
OU-010
24,000 BTU/H 20. WALL MOUNTED EXHAUST FANS SHALL BE FITTED WITH TIME DELAY SWITCH AND
Power Input = 2300 W CONNECTED TO THE LIGHT SWITCH
Height= 2000FFL

20. WALL MOUNTED THERMOSTATS SHALL BE USED FOR ALL TOWER TYPE INDOOR UNITS.
WALL MOUNTED REMOTE CONTROLLERS SHALL BE INSTALLED FOR USE BY WALL
5 MOUNTED AC UNITS.

STORE 01
21. ALL AC UNITS SHALL BE INVERTER CONTROLS. LG UNITS WAS USED FOR THE DESIGN,
01.023
CONTRACTOR CAN SELECT AN EQUAL BRAND WHICH SHALL BE APPROVED BY ENGINEER
BEFORE PROCUREMENT AND INSTALLATION
Refrigerant Pipes in ceiling

22. EQUIPMENT SIZES ARE AS SHOWN IN THE LAYOUT. AC EQUIPMENTS ARE SIZED @ 24OC
DB/50% RH INDOOR CONDITION; 35OC/26OC OUTDOOR DB/WB

23. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE STATED. ALL ELEVATIONS ARE TO
FINISHED FLOOR LEVELS

6 No. Description Date

MALE TOILET F. TOILET

01.013 01.018

EF-003
1000 m3/h 100Pa
150ø Power Input = 180 W
3355 FFL 250ø
IU-005 IU-006 Height= 3200FFL
IU-007 IU-008 3355 FFL
90,000 BTU/H 90,000 BTU/H Exhaust Duct
Power Input = 9500 W Power Input = 9500 W 90,000 BTU/H 90,000 BTU/H
Height= 50FFL Height= 50FFL Power Input = 9500 W Power Input = 9500 W
Height= 50FFL Height= 50FFL Store Store Store Store
Store 01.016 01.017 01.019 01.020
01.015

Pipes to be covered
with trunking Color as
specified by architect
Pipes to be covered
with trunking Color as
specified by architect
150

TERRACE + STAIRS
01.025

OSOGBO, OSUN STATE, NIGERIA

OU-006 OU-007 OU-008 OU-009
OU-005 90,000 BTU/H 90,000 BTU/H 24,000 BTU/H 90,000 BTU/H Location:
90,000 BTU/H Power Input = 9500 W Power Input = 9500 W Power Input = 2300 W Power Input = 9500 W
Power Input = 9500 W Height= 50FFL Height= 50FFL Height= 599.95FFL Height= 50FFL
Height= 50FFL

8
Client :
CATHOLIC DIOCESE OF OSOGBO
AC Condensate to Grave Pit. AC Condensate to Grave Pit. AC Condensate to Grave Pit. AC Condensate to Grave Pit. AC Condensate to Grave Pit.
see detail see detail see detail see detail see detail

GROUND FLOOR HVAC LAYOUT

Drawn by AN
M-001
Designed by AF

Checked by Engr. Festus Ani Date JULY 2022

Approved by Scale As indicated

Engr. Festus Ani
A B C D E F G H I J K
 REFERENCES

GENERAL NOTES
OU-103 OU-105 OU-115 OU-117
24,000 BTU/H 24,000 BTU/H 24,000 BTU/H 24,000 BTU/H
Power Input = 2300 W Power Input = 2300 W Power Input = 2300 W Power Input = 2300 W
Height= 600FFL Height= 600FFL Height= 600FFL Height= 600FFL
LEGEND

Wall Mounted Type AC Indoor Unit

OU-102 Outdoor for Wall mounted Type AC Indoor Unit
24,000 BTU/H OU-104 OU-106 OU-113 OU-114
Power Input = 2300 W 24,000 BTU/H 24,000 BTU/H 24,000 BTU/H 24,000 BTU/H Tower Type AC Indoor Unit
Height= 600FFL Power Input = 2300 W Power Input = 2300 W Power Input = 2300 W Power Input = 2300 W Outdoor for Tower Type AC
Height= 600FFL Height= 600FFL Height= 600FFL Height= 600FFL
Exhaust Air Valve
OU-101 EF-005 Flexible Duct
24,000 BTU/H 80m3/h Exhaust Air Duct
Power Input = 2300 W Power Input = 22 W Duct reducer
Height= 600FFL Height= 0FFL
Duct Tee/Taps
Refrigerant pipes, Liquid and gas
AC Condensate pipes
Connect to Sewage with
Siphon
HVAC NOTES

150
1 1. APPLICABLE CODES INCLUDE, BUT ARE NOT LIMITED TO, THE LATEST
Condensate Pipe Condensate Pipe Condensate Pipe Condensate Pipe Condensate Pipe
below floor slab below floor slab below floor slab below floor slab below floor slab Store ADOPTED VERSION OF:
EF-004 01.112

1000 m3/h 100Pa

Power Input = 180 W
• 2006 IBC INTERNATIONAL BUILDING CODE
DN32 DN32 ACC. WC Height= 3200FFL • 2006 IMC INTERNATIONAL MECHANICAL CODE
• 2002 NFPA 90A AIR CONDITIONING AND VENTILATION CODE
01.114
DN32
• 2006 NFPA 90B AIR CONDITIONING AND VENTILATION CODE
IU-101 IU-103 IU-105 IU-113 IU-114 F. WC
01.113
Store
01.111 • 1995 SMACNA HVAC DUCT CONSTRUCTION MATERIALS
24,000 BTU/H 24,000 BTU/H 24,000 BTU/H 24,000 BTU/H 24,000 BTU/H
Power Input = 2300 W Power Input = 2300 W Power Input = 2300 W Power Input = 2300 W Power Input = 2300 W
Height= 2750FFL Height= 2750FFL Height= 2750FFL Height= 2750FFL Height= 2750FFL 2. HVAC SYSTEM SHALL BE INSTALLED COMPLETE WITH ALL WORK,
250ø MATERIALS, AND EQUIPMENT CUSTOMARILY CONSIDERED PART OF SUCH WORK FOR
3355 FFL FULLY OPERATIONAL, COMPLETE AND CODE COMPLIANT SYSTEMS. PROVIDE AND INSTALL
Store
01.110
ALL EQUIPMENT, DUCTING, DIFFUSERS, LOUVERS, GRILLES, ETC. AS REQUIRED.
Exhaust Duct
STAIR HALL
01.101
3. PLANS ARE DIAGRAMMATIC AND ARE PROVIDED ONLY TO SHOW GENERAL SYSTEMS.
Refrigerant Pipe in ceiling CONTRACTOR SHALL CONSIDER ACTUAL FIELD CONDITIONS DURING INSTALLATION ANY
HALL 02
GROSS INTERFERENCE SHALL BE BROUGHT TO THE ATTENTION OF THE ENGINEER
01.116 BEFORE CONTINUING.

A' 4. PLAN SCALES NOTED, IF ANY, ARE ONLY APPLICABLE TO PLANS PLOTTED AT FULL SIZE.
CONTRACTOR IS CAUTIONED WHEN USING PLANS PLOTTED AT REDUCED SIZES.
100ø
Refrigerant Pipe in ceiling
3388 FFL
REGARDLESS, CONTRACTOR SHALL NOT SCALE PLANS, BUT SHALL REFER TO NOTED
LOBBY
01.106
DIMENSIONS. FOR DIMENSIONS NOT NOTED, CONTRACTOR SHALL REFER TO ACTUAL
FIELD CONDITIONS AND/OR DIMENSIONED ARCHITECTURAL, STRUCTURAL, OR CIVIL
PLANS.
CONFERENCE HALL
01.119

Refrigerant Pipe in ceiling Store

01.109
5. SUBMITTAL REQUIREMENTS: CONTRACTORS SHALL PREPARE AND SUBMIT TO THE
Refrigerant Pipe in ceiling
ENGINEER FOR REVIEW AND APPROVAL DETAILED PRODUCT INFORMATION ON ALL
150ø EQUIPMENT PROPOSED FOR USE. SUBMITTAL SHALL BE PROVIDED AND ENGINEER SHALL
CV1
3355
01.035 FFL 100ø
Refrigerant Pipe in ceiling
3355 FFL REVIEW AND APPROVE, PRIOR TO EQUIPMENT PURCHASE. CONTRACTOR SHALL REVIEW
AND CERTIFY BY SIGNATURE THAT SUBMITTED EQUIPMENT MEETS SPECIFICATION.
2 CONTRACTOR SHALL BE RESPONSIBLE FOR ALL DIMENSIONS, FITTING, AND
Store
01.108
100ø CONSTRUCTION FEATURES RELATIVE TO EQUIPMENT. APPROVAL OF SUBMITTAL
3355 FFL
Connect to Sewage with INFORMATION BY THE ENGINEER DOES NOT RELIEVE THE CONTRACTOR'S OBLIGATION TO
Refrigerant Pipe in ceiling
Siphon PROVIDE CODE COMPLIANT SYSTEMS.
L 3 6. ALL SERVICEABLE EQUIPMENT, VALVES, UNIONS, FIRE DAMPERS, CONTROLS, ETC.
100ø 150ø
3355 FFL 3355 FFL
SHALL BE INSTALLED IN ACCESSIBLE LOCATIONS.

7. LOCATE AND INSTALL ALL EQUIPMENT CONSIDERING MANUFACTURERS CLEARANCES,

MANUFACTURERS INSTALLATION INSTRUCTIONS, AND LISTING AGENCY CERTIFICATIONS.
Condensate Pipe Condensate Pipe
below floor slab below floor slab
8. VERIFY ALL ELECTRICAL REQUIREMENTS WITH EQUIPMENT MANUFACTURERS.
IU-102 IU-104 IU-106 Condensate Pipe below floor slab IU-111 IU-115 IU-117 COORDINATE WITH ELECTRICAL CONTRACTOR.
24,000 BTU/H 24,000 BTU/H 24,000 BTU/H 24,000 BTU/H 24,000 BTU/H 24,000 BTU/H
Power Input = 2300 W Power Input = 2300 W Power Input = 2300 W Power Input = 2300 W Power Input = 2300 W Power Input = 2300 W
Height= 2750FFL Height= 2750FFL Height= 2750FFL Height= 2750FFL Height= 2750FFL Height= 2750FFL 9. FIRE STOPPING SYSTEM SHALL BE INSTALLED AT ALL PENETRATIONS THROUGH FIRE
RATED WALLS, CEILINGS OR CONSTRUCTION
DN40
Condensate Pipe below floor slab
Condensate Pipe below floor slab Condensate Pipe below floor slab
10. PROVIDE AND INSTALL ALL HANGERS AND SUPPORTS PER CODE AND SMACNA
- - Condensate Pipe below floor slab Condensate Pipe below floor slab
DN40 RECOMMENDATIONS.

11. THERMOSTATS SHALL BE PROGRAMMABLE TYPE COMPATIBLE WITH MECHANICAL

PRE-EVENT HALL Condensate Pipe below floor slab

4 EQUIPMENT SERVED.
01.115

12. ALL DUCT WORK DIMENSIONS SHOWN ARE INSIDE CLEAR. FABRICATE DUCT SO TO
MAINTAIN CLEARANCE SPECIFIED. INTERNALLY LINED DUCTS SHALL BE OVERSIZED SO TO
ACCOMMODATE THICKNESS OF INSULATION.
IU-123
24,000 BTU/H 13. SUPPLY, RETURN, AND OUTSIDE AIR DUCTWORK SHALL BE GALVANIZED SHEET METAL
Power Input = 2300 W OU-123
IU-107 IU-109 IU-111 Condensate Pipe WITH INSULATION AS NOTED ON THE PLANS AND MATERIALS SCHEDULES.
24,000 BTU/H 24,000 BTU/H 24,000 BTU/H below floor slab RECEPTION 02
01.104 Height= 2750FFL 24,000 BTU/H
Power Input = 2300 W Power Input = 2300 W Power Input = 2300 W Power Input = 2300 W
Height= 2750FFL Height= 2750FFL Height= 2750FFL Height= 1200FFL 14. LOCATE ALL CEILING MOUNTED REGISTERS, GRILLES, DIFFUSERS, FANS, ETC. PER
IU-116 REFLECTED CEILING PLAN. COORDINATE WITH ELECTRICAL AND FINISH CEILING
24,000 BTU/H
STORE
01.121 Power Input = 2300 W INSTALLATION.
Refrigerant Pipe in ceiling Refrigerant Pipe in ceiling
Height= 2750FFL
Refrigerant Pipe in ceiling
Condensate Pipe below floor slab
15. ALL TRANSVERSE JOINTS TO BE SEALED WITH APPROVED DUCTSEALER.

16. TURNS IN DUCTWORK SHALL HAVE 1.5 MINIMUM RADIUS RATIO WHENEVER POSSIBLE,
OTHERWISE TURNING VANES SHALL BE INSTALLED WITHIN DUCT.

17. EVERY SUPPLY DIFFUSER SHALL BE INDIVIDUALLY CONTROLLED BY A DAMPER PLACED

AT THAT DIFFUSER'S SUPPLY DUCT TAKEOFF

Refrigerant Pipe in ceiling

TERRACE 02
5 18. INSTALL FLEXIBLE VIBRATION ISOLATION DUCT SECTIONS AT BOTH SUPPLY AND
IU-118 01.102

24,000 BTU/H RETURN DUCT CONNECTIONS TO THE FURNACE / AIR HANDLER.

Power Input = 2300 W
Height= 2750FFL 19. ALL OUTDOOR AIR INTAKE LOUVERS SHALL BE 3.5m MINIMUM DISTANCE AWAY FROM
HALL 03
Refrigerant Pipe in ceiling
01.120
SEWER OR COMBUSTION EXHAUST VENTS.

20. WALL MOUNTED EXHAUST FANS SHALL BE FITTED WITH TIME DELAY SWITCH AND
Refrigerant Pipe in ceiling CONNECTED TO THE LIGHT SWITCH
Refrigerant Pipe in ceiling Refrigerant Pipe in ceiling
20. WALL MOUNTED THERMOSTATS SHALL BE USED FOR ALL TOWER TYPE INDOOR UNITS.
WALL MOUNTED REMOTE CONTROLLERS SHALL BE INSTALLED FOR USE BY WALL
Condensate Pipe below floor slab
MOUNTED AC UNITS.
6 21. ALL AC UNITS SHALL BE INVERTER CONTROLS. LG UNITS WAS USED FOR THE DESIGN,
OFFICE 02 OFFICE 01 CONTRACTOR CAN SELECT AN EQUAL BRAND WHICH SHALL BE APPROVED BY ENGINEER
BEFORE PROCUREMENT AND INSTALLATION
01.118 01.117

22. EQUIPMENT SIZES ARE AS SHOWN IN THE LAYOUT. AC EQUIPMENTS ARE SIZED @ 24OC
DB/50% RH INDOOR CONDITION; 35OC/26OC OUTDOOR DB/WB
DN32
DN32
23. ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE STATED. ALL ELEVATIONS ARE TO
IU-108 IU-110 IU-119 IU-120 IU-121 IU-121 TECHNICAL ROOM
FINISHED FLOOR LEVELS
24,000 BTU/H 24,000 BTU/H 24,000 BTU/H 24,000 BTU/H 24,000 BTU/H 24,000 BTU/H 01.105

Condensate Pipe below floor slab

Power Input = 2300 W Power Input = 2300 W Power Input = 2300 W Power Input = 2300 W Power Input = 2300 W Power Input = 2300 W
Height= 2750FFL Height= 2750FFL Height= 2750FFL Height= 2750FFL Height= 2750FFL Height= 2750FFL

No. Description Date

Condensate Pipe below floor slab

Condensate Pipe below floor slab Condensate Pipe below floor slab Condensate Pipe below floor slab Condensate Pipe below floor slab

IU-122
DN32 24,000 BTU/H
STAIRS
Power Input = 2300 W
7
01.122
Height= 2750FFL

TERRACE 03
01.103

OU-108
24,000 BTU/H
Power Input = 2300 W OU-121
Height= 600FFL OU-109 24,000 BTU/H
24,000 BTU/H OU-111 OU-112 OU-119 OU-120 Power Input = 2300 W OU-122
Power Input = 2300 W 24,000 BTU/H 24,000 BTU/H 24,000 BTU/H 24,000 BTU/H Height= 600FFL 24,000 BTU/H
Height= 600FFL Power Input = 2300 W Power Input = 2300 W OU-116 Power Input = 2300 W Power Input = 2300 W Power Input = 2300 W
Height= 600FFL Height= 600FFL 24,000 BTU/H Height= 600FFL Height= 600FFL Height= 600FFL
Power Input = 2300 W
Height= 600FFL
8
OU-107
24,000 BTU/H OU-118
OU-110 24,000 BTU/H
Power Input = 2300 W
24,000 BTU/H Power Input = 2300 W
Height= 600FFL
Power Input = 2300 W Height= 600FFL
Height= 600FFL

Location: OSOGBO, OSUN STATE, NIGERIA

Client :
CATHOLIC DIOCESE OF OSOGBO

FIRST FLOOR HVAC LAYOUT

A B C D E F G H I J K
Drawn by AN
M-002
Designed by AF

Checked by Engr. Festus Ani Date JULY 2022

Approved by Scale As indicated

Engr. Festus Ani