0% found this document useful (0 votes)
387 views2 pages

30KW Solar System (3587)

This document summarizes a 30kW solar storage system with the following key specifications: 1. The system has a 51.2kW capacity and is designed to operate for 5 hours per day, with a 0.8 efficiency rating providing 204.8kWh of daily power. 2. It includes 200kWh of lithium battery storage that can fully charge in 4 hours and discharge to 80% depth. 3. The system uses 128 400W solar panels arranged in 16 panels per string across 8 strings to provide about 200kWh of daily solar generation.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
387 views2 pages

30KW Solar System (3587)

This document summarizes a 30kW solar storage system with the following key specifications: 1. The system has a 51.2kW capacity and is designed to operate for 5 hours per day, with a 0.8 efficiency rating providing 204.8kWh of daily power. 2. It includes 200kWh of lithium battery storage that can fully charge in 4 hours and discharge to 80% depth. 3. The system uses 128 400W solar panels arranged in 16 panels per string across 8 strings to provide about 200kWh of daily solar generation.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

System requirement instruction: Pvsys 30KW solar storage system(PVSG30KHF)

System Capacity(kW) 51.2


Peak Sunshine Hours 5
System Efficiency 0.8
204.8
Battery Capacity 200KWH

Battery Full Charge Time 4 hours

Battery Discharge Depth 80%

Item Part Specification Reference Picture Quantity Warranty


Total Power:51.2KW
PV array : 16 pcs in 1 string,16*8 strings
15 years limited warranty
Solar panels
1 Solar panels: 128 pcs 25 years power output warranty
400W Mono-Crystal; Class A

Material: Hot-dip galvanized steel or


Mounting Bracket Aluminium; 10 years
2 1 set
Installation place: On the ground or
Roof installing style Aluminium

Model:GSI384-60KVA3(Maximum with
48KW loads)
AC380V/220V/50HZ
Inverter
3 Hybrid Inverter can be connected with grid 1 set 2 years
power or diesel power generation

Model:GBP384-525
LifePO4 Battery Pack 324V 525Ah (200kWh)
4 1 set 5 years
With BMS

High Voltage DC
5 Electricity Cabinet Need Customization for this system 1 set 2 years

Mppt Controller Model:GSM384-100A (420V-800V)


6 2 set 5 years(Battery)

PV Combine Box
7 4in 1out 2 set 1 years

BVR35 Cable
(LifePO4-Controller and
8 BVR35 30 m 20 years
Inverter)

DC cable 4mm2
9 (For PV Solar panel) PV cable:1*4mm² 500 m 20 years

DC cable 16mm2
(PV Combine box-
10 PV cable:1*16mm² 200 m 20 years
Controller)

MC4 Connector
11 Connector 30 Pairs 20 years
System specification
The system adopts the most reasonable power supply mode, which is powered by solar power, lithium battery energy storage, mains power or diesel engine. During the day, the loads use
the power generated by solar energy first, and the excess power is stored in the lithium battery. At night, the power of the lithium battery is used to supply power to the load. When it is
rainy, the inverter detects that the lithium battery is low-voltage But switch to the mains power supply, or give the diesel engine a signal to start the diesel engine, and automatically switch
to the diesel engine to supply power to the load.

According to the requirements of load conditions, the system is designed to use 128 pieces of 400W monocrystalline solar panels, each in the form of 16 pieces in a string, a total of 8 groups,
and each 4 groups pass through a PV combine box with 4 inputs and 1 output The box is connected to the photovoltaic input terminal of the controller to charge the 384V525AH lithium
battery. The daily photovoltaic power generation is about 200KWH, and the lithium battery can actually provide 200KWH of electricity to the load. The lithium battery output is connected
to the inverter, and the inverter output supplies power to the load through the AC distribution box. The system outputs three-phase 380V/220V50Hz sine wave alternating current to supply
power for loads with rated power within 48KW.

Payment: 50% T/T in advance and 50% before deliverying from factory
Quotation available for 15 days

You might also like