We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 1
6124/23, 352 PM ‘The method to optimize harmonics mitigation -Eleccal Installation Guide
The method to optimize harmonics mitigation
The best solution, in both technical and financial terms, is based on the results of an in-depth study.
Harmonic audit of MV and LV networks
By calling on an expert, you are guaranteed that the proposed solution will produce effective results (e.g. a
guaranteed maximum THD.)
Aharmonic audit is carried out by an engineer specialised in the disturbances affecting electrical distribution
networks and equipped with powerful analysis and simulation equipment and software.
The steps in an audit are the following:
Measurement of disturbances affecting current and phase-to-phase and phase-to-neutral voltages at the
supply source, the disturbed outgoing circuits and the non-linear loads
Computer modelling of the phenomena to obtain a precise explanation of the causes and determine the best
solutions
Acomplete audit report presenting:
The current levels of disturbances
The maximum permissible levels of disturbances (refer to IEC 61000, IEEE 519, etc.)
A proposal containing solutions with guaranteed levels of performance
Finally, implementation of the selected solution, using the necessary means and resources,
The entire audit process should be certified ISO 9002
This page was last edited on 4 August 2022, at 07:31
hitps:www-olacticabinstallaon orgfenwik/The_method_to_optimize_harmanics_migation
