WindSonic

At last, a real low cost alternative to conventional cup/vane/

propeller wind sensors in a single unit - WindSonic from
Gill Instruments. Utilising our expertise as the world's leading
sonic manufacturer, WindSonic is based on our existing,
highly successful, proven ultrasonic technology. Ideal
for applications that demand economic wind sensing,
WindSonic is suitable for land-based and marine
environments.
A lightweight unit,WindSonic is of a robust, high strength
Key Features construction designed to withstand installation and use
with no fear of the damage commonly experienced with
more fragile cups, vanes or propellers. Without the
Low Start Speed need for expensive on-site calibration or maintenance
Corrosion Free and with a corrosion free exterior, WindSonic is a true fit
and forget unit.
Low Power The flexible design enables you to easily configure WindSonic
No Calibration Required to deliver the information you require. By using the software
provided it is possible to select the output rate and choose
Robust Construction the units of measurement that suit your application. Ensuring
True 0-359º Operation accuracy and reliability, WindSonic automatically transmits
an anemometer status code with each output to indicate its
(No dead band) operating status. Available in four options, providing a number
Wind Speed & Direction from a Single Unit of different digital and analogue outputs.
Available in Black or White Maintenance free, quick and easy to install, WindSonic is
designed to be mounted using a standard pole fitting and
comes complete with all screw fittings, a mating marine grade
Specification connector and comprehensive user manual. The unit is supplied
with a 2 year warranty as standard.

Wind Speed Power Requirement

Range 0 - 60 m/s (116 knots) Anemometer 5-30V dc Option 1 & 2
Accuracy ±2% @ 12 m/s 7-30V dc Option 3
Resolution 0.01 m/s (0.02 knots) 9-30V dc Option 4
Response Time 0.25 seconds From 5.5mA @ 12V
Threshold 0.01 m/s Start up time < 5 seconds
Direction MTBF
Range 0 - 359º (No dead band) 15 years
Accuracy ±3º @ 12 m/s Mechanical
Resolution 1º External Construction LURAN S KR 2861/1C ASA/PC
Response Time 0.25 seconds Size 142mm x 160mm
Measurement Weight 0.5kg
Ultrasonic Output Rate 0.25Hz, 0.5Hz, 1Hz, 2Hz or 4Hz Environmental
Parameters Wind Speed & Direction or U and V Protection Class IP65
(vectors)
OperatingTemperature -35°C to +70°C
Units of Measure m/s, knots, mph, kph, ft/min
Storage Temperature -40°C to +80°C
Outputs Operating Humidity < 5% to 100% RH
Option 1 RS232 EMC EN 61326: 1998
Option 2 RS232 + RS422 + RS485 + NMEA* Warranty
Option 3 RS232 + RS422 + RS485 + NMEA*
2 years
+ 0.5V or, 0-20mA or 4-20mA
Option 4 SDI-12 (refer to manual for technical Factory Calibration Traceable to National Standards
specification)

Baud Rate 2400 to 38400

Accessories
Anemometer Status Supplied as part of standard message Pipe Mounting 44.45mm (1.75 in) diameter
Wind Software Display / Logging**
Cables Available to match output options
* NMEA 0183
** Download software free from www.gill.co.uk Display See Gill Display datasheet

Wind Speed & Direction Sensor

 Gill Instruments Ltd

WindSonic Saltmarsh Park, 67 Gosport Street, Lymington, Hampshire, SO41 9EG, UK

T: +44 (0) 1590 613 500 F: +44 (0) 1590 613 501 E: anem@gill.co.uk www.gill.co.uk

Typical Applications

Agriculture

HVAC

Pollution control

Portable weather Stations

Roadside Weather Stations

Tunnels

Marine

Dimensions

The WindSonic is part of the Solent range of ultrasonic anemometers.

The range is in continuous development and therefore specifications may be subject to change without prior notice.

Copyright © Gill Instruments 2009

D303
Gill Instruments Ltd
Reg No. 3154453 Registered Office: The George Business Centre, Christchurch Road, New Milton, BH25 6QJ