0% found this document useful (0 votes)
45 views7 pages

Innova Iprodione 500 Label

Uploaded by

gafomo4046
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
45 views7 pages

Innova Iprodione 500 Label

Uploaded by

gafomo4046
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

IIA0907 Iprodione500Aq10L bkcov.

qxd 14/12/07File:
9:47 AM Page 1
62463_43170_10L_bookletcover_MPL_V01.pdf Date 20-12-07
TRIM: 175 (w) x 165mm (h) • BLACK, PANTONE 2747, PANTONE 347 Dimensions: 175mm(w) x 165mm(h) Scale: 100% (A4)

LIFT
Infopest HERE
READ SAFETY DIRECTIONS BEFORE OPENING OR USING

Verified

Iprodione 500
Aquaflo
FUNGICIDE
APPROVED
LABEL
ACTIVE CONSTITUENT: 500 g/L IPRODIONE

FUNGICIDE
For control of certain fungal diseases in various crops and
situations as per the Directions for Use
IMPORTANT: Read this booklet before use

10 LITRES
Syngenta Crop Protection Pty Limited
Level 1, 2-4 Lyonpark Road, Macquarie Park NSW 2113
In a transport emergency dial 000, Police or Fire Brigade
For specialist advice in an emergency only,
call 1800 033 111 (24 hours)
APVMA Approval No: 62463/10-20/1107
IIA0907
IIA0907 Iprodione500Aq10L.qxd 17/12/07 8:11 AM Page 1 File: 62463_43170_10L_front&backbase_MPL_V01.pdf
TRIM: 381mm (8+175+15+175+8) (w) x 165mm (h) • BLACK only Dimensions: 175mm(w) x 165mm(h) Scale: 100% (A3) Date 20-12-07

READ SAFETY DIRECTIONS BEFORE OPENING OR USING STORAGE AND DISPOSAL


Keep out of reach of children. Store in the closed, original container in a dry, cool, well ventilated area out of direct
sunlight. Protect from frost. Triple or preferably pressure rinse containers before disposal. Add rinsings to spray tank.
DO NOT dispose of undiluted chemicals on site. If recycling replace cap and return clean containers to recycler or
designated collection point. If not recycling, break, crush or puncture and bury empty bags in a local authority landfill.
If no landfill is available, bury the containers below 500 mm in a disposal pit specifically marked and set up for this
purpose clear of waterways, desirable vegetation and tree roots. Empty containers and product should not be burnt.

SAFETY DIRECTIONS
Avoid contact with eyes and skin. Wear suitable protective clothing, gloves and goggles. If product on skin,

Iprodione 500 immediately wash area with soap and water. After use and before eating, drinking or smoking, wash hands, arms
and face thoroughly with soap and water.

FIRST AID

Aquaflo If poisoning occurs, contact a doctor or Poisons Information Centre. Phone 131 126.

MATERIAL SAFETY DATA SHEET


If additional hazard information is required refer to the Material Safety Data Sheet. For a copy visit our website at
FUNGICIDE www.syngenta.com.au

APPROVED MANUFACTURER’S WARRANTY AND EXCLUSION OF LIABILITY


Syngenta has no control over storage, handling and manner of use of this product. Where this material is not stored,
ACTIVE CONSTITUENT: 500 g/L IPRODIONE LABEL handled or used correctly and in accordance with directions, no express or implied representations or warranties
concerning this product (other than non-excludable statutory warranties) will apply. Syngenta accepts no liability for
FUNGICIDE any loss or damage arising from incorrect storage, handling or use.

® Product names marked ®, the INNOVA logo, the SYNGENTA logo and the CP FRAME
For control of certain fungal diseases in various crops and are trademarks of a Syngenta Group Company
situations as per the Directions for Use * Trademark

IMPORTANT: Read the attached booklet before use APVMA Approval No: 62463/10-20/1107
IIA0907

10 LITRES
Syngenta Crop Protection Pty Limited
Level 1, 2-4 Lyonpark Road, Macquarie Park NSW 2113 Batch Number
In a transport emergency dial 000, Police or Fire Brigade
For specialist advice in an emergency only,
call 1800 033 111 (24 hours)
APVMA Approval No: 62463/10-20/1107
Date of
IIA0907 Manufacture
IIA0907 Iprodione500Aq10L book.qxd 17/12/07 8:10 AM Page 1 File: 62463_43170_10L_booklet_MPL_V01.pdf
TRIM: 150mm (w) x 162mm (h) • BLACK ONLY Dimensions: 150mm(w) x 162mm(h) Scale: 100% (A3) Date 20-12-07

THIS STAYS BLANK AS ADHESIVE COVER STICKS TO THIS


IIA0907 Iprodione500Aq10L book.qxd 17/12/07 8:10 AM Page 2

DIRECTIONS FOR USE


Rate Critical Comments
Tree Crops/Vines
In the following table all rates are given for dilute spraying. For concentrate For all uses in this table: Apply by dilute or concentrate
Rate Critical Comments spraying, refer to Application section. spraying equipment. Apply the same total amount of
product to the target crop whether applying this product
In the following table all rates are given for dilute spraying. For concentrate For all uses in this table: Apply by dilute or concentrate by dilute or concentrate spraying methods. Refer to
spraying, refer to Application section. spraying equipment. Apply the same total amount of Crop Disease State Rate WHP Application section.
product to the target crop whether applying this product
by dilute or concentrate spraying methods. Refer to Stone Fruit Orchard Spraying Qld, NSW, 50 to Nil For control of Blossom Blight, spray at 10% blossom, full
Crop Disease State Rate WHP Application section. Apricots, Blossom Blight Vic, Tas, 75 mL/ bloom and petal/shuckfall. For control of subsequent
Cherries, (Monilinia fructicola, SA, WA 100 L Brown Rot in fruit, spray at 3 weeks and 1 week pre-
Almonds Blossom Blight, Brown Rot All States 50 mL/ Nil Apply first at full bloom and, if conditions are favourable Nectarines, Monilinia laxa), only water harvest. Use the higher rate under severe conditions of
(Monilinia spp., Sclerotinia 100 L for disease development, up to 2 subsequent applications Peaches, Brown Rot challenge, or for single applications of INNOVA IPRODIONE
spp.) water can be made; at petal fall and up to 4 weeks after petal fall. Plums (Monilinia fructicola, 500 in the spray program.
Monilinia laxa) This use is subject to a CropLife fungicide resistance
Boysenberries Grey Mould (Botrytis cinerea) 100 mL/ 1 day Spray at 10% blossom and full bloom. For fruit protection, management strategy.
100 L apply at 2 to 3 weeks pre-harvest. 1. DO NOT apply more than 2 consecutive sprays of
water INNOVA IPRODIONE 500 (or other Group B fungicides).
Grapes 7 days Good crop hygiene will aid in the control of disease. 2. A post-harvest treatment should also be counted as an
This use is subject to a CropLife fungicide resistance application.
management strategy. 3. The last Blossom Blight spray and the first pre-harvest
1. If 3 or fewer Bunch Rot sprays are applied in a season use Brown Rot spray should be regarded as consecutive
only 1 spray per season containing INNOVA IPRODIONE applications.
500 (or other Group B Fungicide). If 4 or more bunch rot 4. The spray program should be considered and the
sprays are applied in a season use no more than 2 sprays strategy applied on a whole-orchard basis.
containing Group B fungicides, unless tank mixed with a
registered multi-site (Group Y) fungicide. Youngberries Grey Mould (Botrytis cinerea) All States 100 mL/ 1 day Spray at 10% blossom and full bloom. For fruit protection,
2. Late season fungicide treatments should be applied 100 L apply at 2 to 3 weeks pre-harvest.
before botrytis infection reaches unacceptably high water
levels in the vineyard.
3. DO NOT apply more than 2 consecutive sprays from the
Fruit - Post Harvest Dipping
same fungicide group, including from the end of one
season to the next.
Crop Disease State Rate WHP Critical Comments
Kiwifruit Botrytis Blight NSW, Vic, Apply the spray to vines every 10 to 14 days ensuring that
(Botrytis spp.) WA only all fruit is thoroughly wet. Apply 3 applications at 10 to Pome fruit Post-harvest dipping All States 100 mL/ Nil To minimise the development of post-harvest rots handle
14 day intervals from 10% bloom to petal fall for protection Apples, Storage Rots 100 L fruit carefully to avoid fruit injury and dip promptly after
of flowers and young fruit. Apply a further 2 applications Pears (Penicillium spp.) water harvest. Remove any infected fruit from the packing house
of INNOVA IPRODIONE 500 to control late season botrytis. (Botrytis spp.) immediately and destroy. When dipping, allow sufficient
(Gloeosporium spp.) time to thoroughly wet the fruit. Top up dip with 100 mL
Macadamias Botrytis Blight All States 50 mL/ Nil Apply as a thorough cover spray to flower racemes when INNOVA IPRODIONE 500 in 100 L of water.
(Botrytis spp.) 100 L they open. A follow up spray may be needed 1 week later This use is subject to a CropLife fungicide resistance
water if wet conditions persist during flowering. Remove nuts management strategy.
under trees prior to spraying. 1. For the last pre-harvest spray, use a fungicide with a
different mode of action to the fungicide planned for
Mandarins Alternaria Leaf Spot (Brown Qld, WA, 100 mL/ Apply to non-bearing trees of Murcott variety monthly use as a post-harvest treatment.
non bearing Spot) NT only 100 L from first flush in spring until flushing ceases in the 2. Where alternative fungicide groups are available, rotate
(Alternaria alternata) water autumn. Reduce intervals to fortnightly during periods of to use as many different modes of action as possible.
wet weather.
Stone Fruit Post-harvest dipping Qld, NSW, To minimise the development of post-harvest rots handle
Passionfruit Alternata Spot (Brown Spot) Qld, NSW, 7 days This use is subject to a CropLife fungicide resistance Apricots, Brown Rot (Monilinia Vic, Tas, fruit carefully to avoid fruit injury and dip promptly after
(Alternaria spp., Alternaria WA, NT management strategy. Cherries, fructicola, Monilinia laxa), SA, WA harvest. Remove any infected fruit from the packing house
passiflorae) only 1. Maintain a protective cover with protectant fungicide Nectarines, Transit Rot (Rhizopus spp.) only immediately and destroy. When dipping, allow sufficient
such as mancozeb. Peaches, time to thoroughly wet the fruit. Top up dip with 200 mL
2. Limit the use of INNOVA IPRODIONE 500 to strategic Plums INNOVA IPRODIONE 500 in 100 L of water. A non-ionic
periods, ie before, during and after extended wet periods. wetting agent should be added.
3. Always tank mix INNOVA IPRODIONE 500 with a Transit rot is suppressed at this rate.
protectant such as mancozeb. This use is subject to a CropLife fungicide resistance
4. DO NOT apply more than 4 INNOVA IPRODIONE 500 (or management strategy.
other Group B fungicide) sprays in a season. 1. For the last pre-harvest spray, use a fungicide with a
different mode of action to the fungicide planned for
Raspberries Grey Mould (Botrytis cinerea) All States 1 day Spray at 10% blossom and full bloom. For fruit protection, use as a post-harvest treatment.
apply at 2 to 3 weeks pre-harvest. 2. Where alternative fungicide groups are available, rotate
to use as many different modes of action as possible.

2 3
IIA0907 Iprodione500Aq10L book.qxd 17/12/07 8:10 AM Page 4

Berries
(See Tree Crops/Vines for Boysenberries, Raspberries, Youngberries) Crop Disease State Rate WHP Critical Comments

Crop Disease State Rate WHP Critical Comments Tomatoes Sclerotinia Rot Qld, NSW, 1.0 L/ha where spray 7 days Spray at 14 day intervals from transplanting and
(Sclerotinia sclerotiorum) Tas, SA, volume is less than throughout the period of disease pressure.
Strawberries Grey Mould All States 1.0 L/ha where spray volume 1 day This use is subject to a CropLife fungicide resistance WA only 1000 L/ha
(Botrytis cinerea) is less than 1000 L/ha management strategy. OR
OR 1. Apply a program of protectant fungicides during Grey Mould All States 100 mL/ 100 L water Commence spraying 3 to 4 weeks after transplanting or at
100 mL/100 L water where flowering. If conditions favour disease development (Botrytis cinerea) where spray volume the onset of disease. Repeat treatment at 14 day intervals
spray volume equals or during this period use INNOVA IPRODIONE 500. equals or exceeds or when conditions favour spread of the disease, ie at
exceeds 1000 L/ha 2. DO NOT apply more than 2 successive sprays of INNOVA 1000 L/ha trimming or deleafing.
IPRODIONE 500 (or other Group B fungicide). This use is subject to a CropLife fungicide resistance
management strategy.
1. Alternate or tank mix INNOVA IPRODIONE 500 with a
Vegetables protectant such as chlorothalonil. Avoid applying 2
INNOVA IPRODIONE 500 (or other Group B fungicide)
Crop Disease State Rate WHP Critical Comments sprays in succession, unless tank mixed with a protectant.
2. DO NOT apply more than 4 INNOVA IPRODIONE 500 (or
Celery Sclerotinia Rot (Pink Rot) All States 1.0 L/ha where spray 1 day Commence spraying 1 to 2 weeks post-transplanting and then other Group B fungicide) sprays in a season.
(Sclerotinia sclerotiorum) volume is less than every 2 to 3 weeks. Use only 5 sprays.
1000 L/ha Target Spot (Early Blight) Qld, Tas, Commence spraying 1 week post-transplanting. Use
Lettuce Sclerotinia Rot (Drop) OR 7 days Spray should be directed to the stems at ground level and to (Alternaria solani) WA, NT adequate water to give thorough coverage of the plants.
(Sclerotinia sclerotiorum, 100 mL/100 L water the underside of lower leaves. only Use high volume spray equipment.
Sclerotinia minor) where spray volume This use is subject to a CropLife fungicide resistance This use is subject to a CropLife fungicide resistance
equals or exceeds management strategy. management strategy.
Grey Mould Tas, WA 1000 L/ha 1. Apply INNOVA IPRODIONE 500 as a seedling drench soon 1. Limit the use of INNOVA IPRODIONE 500 to periods
(Botrytis spp.) only after emergence. when conditions favour disease development.
2. Apply a protectant fungicide as a high volume foliar spray 2. DO NOT apply more than 4 INNOVA IPRODIONE 500 (or
before planting out, then INNOVA IPRODIONE 500 other Group B fungicide) sprays in 1 season. Apply no
immediately after planting. more 2 consecutive sprays of Group B fungicide.
3. Maintain cover with protectant fungicide sprays at 7 to
10 day intervals. Field Crops
4. If weather conditions favour botrytis infection, tank mix the
protectant with INNOVA IPRODIONE 500. Crop Disease State Rate WHP Critical Comments
5. DO NOT apply INNOVA IPRODIONE 500 (or other Group B
fungicides) more than 4 times per season, irrespective of the
target disease. Lucerne Lucerne Leaf Spot Qld, WA 250 to 500 mL/ha 7 days Spray every 10 to 14 days when cool, damp weather
(Stemphylium only where spray volume favours the disease. Use the higher rate under conditions
Potatoes Sclerotinia Rot All States 500 mL to 1.0 L/ha Nil Apply 2 sprays, once immediately before and once botryosum) is less than 1000 L/ha of high disease pressure.
(Sclerotinia sclerotiorum) where spray volume immediately after hilling-up. For most effective treatment, OR
is less than 1000 L/ha concentrate the spray at the base of the stems and Leptosphaerulina Leaf 25 to 50 mL per 100 L Apply in at least 300 L water/ha every 10 to 14 days when
OR surrounding soil surface where the fungus is active. Use the Spot water where spray cool, damp weather favours the disease. Use the higher
50 to 100 mL/ 100 L higher rate where disease is severe. (Leptosphaerulina volume equals or rate under conditions of high disease pressure.
water where spray trifolii) exceeds 1000 L/ha
Target Spot (Early Blight) volume equals or Ensure thorough coverage to the whole plant. Treatment is
(Alternaria solani) exceeds 1000 L/ha generally not required until after flowering. Use the higher Peanuts Sclerotinia Rot 1.0 L/ha 12 days Apply when disease first appears. Repeat if necessary.
rate where disease is severe. (Sclerotinia sclerotiorum, OR Use a high water volume to ensure good coverage of
This use is subject to a CropLife fungicide resistance Sclerotinia minor) 220 mL/100 L water foliage and stem at ground level. DO NOT mix INNOVA
management strategy. (spot application) IPRODIONE 500 with a foliar fungicide due to the
1. Limit the use of INNOVA IPRODIONE 500 to periods when different target positions on the plant.
conditions favour disease development.
2. DO NOT apply more than 4 INNOVA IPRODIONE 500 (or Soybeans Black Leaf Blight NSW, WA 1.0 L/ 200 to 400 L 7 weeks If disease is present on leaves apply an initial spray
other Group B fungicide) sprays in 1 season. (Arkoola nigra) only water/ha at early pod set (pods approximately 5 mm long). An
3. Apply no more than 2 consecutive sprays of a Group B additional spray 14 days later may be required if wet
fungicide. seasonal conditions prevail.

Hypocotyl Rot 400 mL/tonne seed INNOVA IPRODIONE 500 will protect emerging shoots from
(Black Scurf) material Hypocotyl Rot, improving overall germination. INNOVA
(Rhizoctonia solani) IPRODIONE 500 may also reduce occurrence of Black Scurf on the
harvested potatoes. Ensure good coverage of seed material and
planting furrow. This can be achieved by applying INNOVA
IPRODIONE 500 as a fine spray to the seed at the time of planting APPROVED
using spray equipment mounted on the planter, and nozzles LABEL
located at 3 points on each planter row to ensure uniform
coating of the seed. DO NOT plant into waterlogged soil.
A minimum water volume of 80 L/tonne seed should be used.
4 5
IIA0907 Iprodione500Aq10L book.qxd 17/12/07 8:10 AM Page 6

Ornamentals WITHHOLDING PERIODS

Crop Disease State Rate Critical Comments Almonds, Macadamias, Mandarins, Pome Fruit, Potatoes, Stone Fruit:
NOT REQUIRED WHEN USED AS DIRECTED
Ornamentals Botrytis Blight All States 100 mL/100 L water Spray at 14 day intervals commencing when the disease first Boysenberries, Celery, Raspberries, Strawberries, Youngberries:
(Botrytis cinerea) becomes apparent and continuing until conditions no longer DO NOT HARVEST FOR 1 DAY AFTER APPLICATION
favour the disease. Spraying Saintpaulia and Poinsettia flowers Grapes, Kiwifruit, Lettuce, Tomatoes, Passionfruit:
may result in some petal scorch. Tepid water should be used and DO NOT HARVEST FOR 7 DAYS AFTER APPLICATION
wet plants protected from direct sunlight. Peanuts:
This use is subject to a CropLife fungicide resistance management DO NOT HARVEST FOR 12 DAYS AFTER APPLICATION
strategy. Soybeans:
DO NOT apply more than 2 consecutive sprays of a Group B DO NOT HARVEST FOR 7 WEEKS AFTER APPLICATION
fungicide. Lucerne:
DO NOT GRAZE OR CUT FOR STOCK FOOD WITHIN 7 DAYS OF TREATMENT

Recreational Turf
GENERAL INSTRUCTIONS
Crop Disease State Rate Critical Comments Export of treated produce
Growers should note that MRLs or import tolerances may not exist in all markets for produce treated with INNOVA IPRODIONE 500. If you are
Recreation Brown Patch Qld, NSW, 60 to 90 mL/10 to Curative program: Repeat treatment after 14 days. Use the higher growing produce for export, please check with Syngenta for the latest information on MRLs and import tolerances BEFORE using INNOVA
Turf (Rhizoctonia solani), Tas, SA, 150 L water/100 m2 rate under conditions of severe disease pressure. IPRODIONE 500.
Dollar Spot (Sclerotinia WA only For preventative treatment: Apply as a monthly spray program.
homoeocarpa) This use is subject to an AFRAC anti-resistance strategy. DO NOT Mixing
apply more than 2 consecutive sprays of INNOVA IPRODIONE 500 Note: INNOVA IPRODIONE 500 may be unstable in conditions where the pH is 7 or higher. It is therefore essential to check the pH of the spray
Brown Patch Vic only or related dicarboximide fungicides unless tank mixed with a solution before adding INNOVA IPRODIONE 500. A suitable registered buffering agent may have to be added to bring the pH down below 7.
(Curvularia spp.) fungicide from a different activity group. Add the required amount of INNOVA IPRODIONE 500 to the spray tank containing half the required volume of water. Mix thoroughly and
(Dreschlera spp.) make up to the required volume with water.
(Fusarium culmorum)
(Rhizoctonia solani) Application
Good disease control requires even, thorough coverage of the target area. Application should be made using appropriate spray equipment
Fusarium Patch NSW, Vic, 90 mL/10 to 150 L Curative program: Repeat treatment after 14 days. and sufficient water to provide adequate penetration and coverage. Equipment settings and water volume may need to vary, depending on
(Fusarium nivale) Tas, SA, water/100 m2 For preventative treatment: Apply as a monthly spray program. the growth stage of the crop.
WA only This use is subject to an AFRAC anti-resistance strategy. DO NOT Special Instructions for Tree Crops/Vines
apply more than 2 consecutive sprays of INNOVA IPRODIONE 500 Dilute Spraying
Leaf Spot Qld, NSW, 60 mL/10 to 150 L or related dicarboximide fungicides unless tank mixed with a • Use a sprayer designed to apply high volumes of water up to the point of runoff and matched to the crop being sprayed.
(Dreschlera spp.), Vic, SA, water/100 m2 fungicide from a different activity group. • Set up and operate the sprayer to achieve even coverage throughout the crop canopy. Apply sufficient water to cover the crop to the point
Dollar Spot (Sclerotinia WA only of runoff. Avoid excessive runoff.
homoeocarpa) • The required water volume may be determined by applying different test volumes, using different settings on the sprayer, from industry
guidelines or expert advice.
Spring Dead Spot NSW, SA 65 mL per 10 to 150 L For preventative treatment only: Apply as a monthly soil drench • Add the amount of product specified in the Direction for Use table for each 100 L of water. Spray to the point of runoff.
(Leptosphaeria spp.) only water/100 m2 throughout the year. Water in thoroughly after application. • The required dilute spray volume will change and the sprayer set up and operation may also need to be changed, as the crop grows.
When used in a preventative program this product will limit the Concentrate Spraying
Spring Dead Spot Vic, WA development of Leptosphaeria and improve the rate of turf • Use a sprayer designed and set up for concentrate spraying (that is a sprayer which applies water volumes less than those required to reach
(Leptosphaeria spp., only recovery. This use is subject to an AFRAC anti-resistance strategy. the point of runoff) and matched to the crop being sprayed.
Curvularia spp.) DO NOT apply more than 2 consecutive sprays of INNOVA • Set up and operate the sprayer to achieve even coverage throughout the crop canopy using your chosen water volume.
IPRODIONE 500 or related dicarboximide fungicides, unless tank • Determine an appropriate dilute spray volume (see Dilute Spraying above) for the crop canopy. This is needed to calculate the concentrate
mixed with a fungicide from a different activity group. mixing rate.
• The mixing rate for concentrate spraying can then be calculated in the following way:
Helminthosporium Qld, NSW, 45 mL per 10 to 150 L For curative treatment: Apply as a foliar spray and repeat Example only
disease affecting leaf, Vic, SA, water per 100 m2 application after 7 to 14 days. For White Spot symptoms on couch 1. Dilute spray volume as determined above: for example 1500 L/ha
crown and roots: WA only grass (Cynodon dactylon) only, use higher water volumes of 100 to 2. Your chosen concentrate spray volume: for example 500 L/ha
(Black and White 150 L/100 m2. 3. The concentration factor in this example is: 3 x (ie 1500 L ÷ 500 L = 3)
Helminthosporium Spot, For preventative treatment: Apply as a high volume foliar spray. 4. If the dilute label rate is 10 mL/100 L, then the concentrate rate becomes 3 x 10, that is 30 mL/100 L of concentrate spray
Bipolaris spp., Drechslera Repeat applications at monthly interval from February to May. • The chosen spray volume, amount of product per 100 L of water, and the sprayer set up and operation may need to be changed as the crop
spp., Exserohilum spp.) This use is subject to an AFRAC anti-resistance strategy. DO NOT grows.
apply more than 2 consecutive sprays of INNOVA IPRODIONE 500 • For further information on concentrate spraying, users are advised to consult relevant industry guidelines, undertake appropriate
or related dicarboximide fungicides, unless tank mixed with a competency training and follow industry Best Practices.
fungicide from a different activity group.

NOT TO BE USED FOR ANY PURPOSE, OR IN ANY MANNER, CONTRARY TO THIS LABEL
UNLESS AUTHORISED UNDER APPROPRIATE LEGISLATION

6 7
IIA0907 Iprodione500Aq10L book.qxd 17/12/07 8:10 AM Page 8

Compatibility
This product may be combined with fosetyl al (see note below), carbaryl 500, calcium chloride, chlorpyrifos 500 g/L EC, copper oxychloride,
dimethoate, Innova Mancozeb, DPA, endosulfan, fenitrothion, dicofol 480 g/L, maldison, Ridomil®Gold, methomyl or parathion-methyl.
When tank mixing products the order of mixing is determined by formulation type. As a guide the following mixing sequence is recommended:
1. Wettable powders 6. Solutions
2. Suspension concentrates (eg INNOVA IPRODIONE 500) 7. Emulsifiable concentrates
3. Water dispersible granules 8. Soluble concentrates
4. Suspo-emulsions 9. Wetting agents and oils
5. Soluble powders
With any mixture, thoroughly agitate immediately before applying, It is not recommended to mix this product with more than one of the
above chemicals in the tank. DO NOT tank mix this product with fertilisers.
Note: Mixing INNOVA IPRODIONE 500 with fosetyl al may result in some settling out.
As formulations of other manufacturers’ products are beyond the control of Syngenta all mixtures should be tested prior to mixing commercial
quantities.
FUNGICIDE
Fungicide Resistance Warning
INNOVA IPRODIONE 500 AQUAFLO FUNGICIDE is a member of the dicarboximide group of fungicides. For fungicide resistance management
the product is a Group B fungicide. Some naturally occurring individual fungi resistant to the product and other Group B fungicides may exist
through normal genetic variability in any fungal population. The resistant individuals can eventually dominate the fungal population if these
fungicides are used repeatedly. These resistant fungi will not be controlled by this product or other Group B fungicides, thus resulting in a
reduction in efficacy and possible yield loss. Since the occurrence of resistant fungi is difficult to detect prior to use, Syngenta Crop Protection
Pty Limited accepts no liability for any losses that may result from the failure of this product to control resistant fungi.

Resistance Management
Do rotate to use products with as many different modes of action as possible to reduce the possibility of resistance development where
alternatives are available. Where specific resistance management strategies are established these are detailed in the Critical Comments (See
Directions for Use).

PROTECTION OF CROPS, NATIVE AND OTHER NON-TARGET PLANTS


DO NOT apply in weather conditions or from spraying equipment that may cause spray to drift onto nearby plants/crops, cropping lands or
pastures.

PROTECTION OF LIVESTOCK
DO NOT graze treated areas or feed turf clippings to animals including poultry.

PROTECTION OF WILDLIFE, FISH, CRUSTACEANS, ENVIRONMENT AND OTHERS


Toxic to aquatic organisms. DO NOT contaminate streams, rivers or waterways with the chemical or used containers.

STORAGE AND DISPOSAL


Keep out of reach of children. Store in the closed, original container in a dry, cool, well ventilated area out of direct sunlight. Protect from
frost. Triple or preferably pressure rinse containers before disposal. Add rinsings to spray tank. DO NOT dispose of undiluted chemicals on site.
If recycling replace cap and return clean containers to recycler or designated collection point. If not recycling, break, crush or puncture and
bury empty bags in a local authority landfill. If no landfill is available, bury the containers below 500 mm in a disposal pit specifically marked
and set up for this purpose clear of waterways, desirable vegetation and tree roots. Empty containers and product should not be burnt.

SAFETY DIRECTIONS
Avoid contact with eyes and skin. Wear suitable protective clothing, gloves and goggles. If product on skin, immediately wash area with soap
and water. After use and before eating, drinking or smoking, wash hands, arms and face thoroughly with soap and water.

FIRST AID
If poisoning occurs, contact a doctor or Poisons Information Centre. Phone 131 126.

MATERIAL SAFETY DATA SHEET


If additional hazard information is required refer to the Material Safety Data Sheet. For a copy visit our website at www.syngenta.com.au

MANUFACTURER’S WARRANTY AND EXCLUSION OF LIABILITY


Syngenta has no control over storage, handling and manner of use of this product. Where this material is not stored, handled or used correctly
and in accordance with directions, no express or implied representations or warranties concerning this product (other than non-excludable
statutory warranties) will apply. Syngenta accepts no liability for any loss or damage arising from incorrect storage, handling or use.

® Products names marked ®, the INNOVA logo, the SYNGENTA logo and the CP FRAME are trademarks of a Syngenta Group Company
* Trademark

You might also like