1. Overview 3. SIM card 5.

Operation Set the sleep period by SMS command:

MODE,2,T1,T2#
1.1 Main Functions SIM card should have access to GPRS and SMS. 5.1 Power ON/OFF “2” means ultra-long standby mode.
Remove the cover, turn battery switch to OFF and insert the “T1” means the start time of sleeping period which format is
·GPS + LBS real-time tracking SIM card. Power on: Battery switch in on position HH:MM.
·5 years ultra-long standby Power off: Battery switch in off position “T2” means the sleep time interval which options are 1, 2, 3, 4, 6,
Power Status indicator
·IPX5 waterproof 8, 12, 24 (hours). Defaulted setting is 24 hours.
·Remote setup 5.2 SOS Number Note: SMS command takes effect after device wakes up.
·Tamper alert SIM card E.g.MODE,2,12:00,8# (Meaning: Device starts to fall asleep at
Set SOS number by SMS, APP and platform (SMS is valid only
·Low battery alert 12:00, and wakes up every 8 hours)
in tracking mode).
·Compact design
(1) Add SOS number by SMS command
Notice: When device are in ultra-long standby mode,
SOS, A,number1,number2,number3 #(A means add number).
1.2 Specications all command will NOT be executed until the device wakes up
Note: Maximum 3 SOS numbers can be set.
Anti-tamper button at preset time interval. If you want to compel the device to wake
e.g. SOS,A, 13510****60,135116****6,136126****8# (set all 3
Frequency GSM 850/900/1800/1900MHz up and receive command, you can a. By trigger the tamper alert
SOS numbers)
WCDMA 850/900/1900/2100MHz Push and loosen button at the back; b. By unplug the battery and plug it in again.
SOS,A, 13510****60# (set the rst SOS number)
Location Accuracy <10 meters the button can SOS,A, ,135116****6# (set the second SOS number)
Monitoring range ≤5 meters trigger tamper alert 4. Installation SOS,A, , ,136126****8# (set the third SOS number)
(2) Tracking mode: Set GPS continuous working hours on APP
Battery 5400mAh / 3.6V high power lithium or platform. Tasks
battery With strong magnet, the device has easy installation and can
will be executed within 24 hours. Tracking mode can be set by
absorb on any magnetic item. Attached 3M foam tape help x (2) Delete SOS Numbers
Standby time 5 years (one time positioning per day) APP, tracking platform or SMS.
the device on non-magnetic items. Send SMS command:
Operating temperature -20℃— +70℃ MODE,1,T1,T2#
SOS, D,1,2,3# (D means delete SOS number)
Dimension 80(L) x 50(W) x 26(H) mm “1” means tracking mode.
e.g. SOS, D,1# (means delete the rst number)
Weight 158g “T1” means the time interval to upload location, ranges from
SOS, D,3# (means delete the third number)
2.2 Standard Accessories 10-1800 (seconds)
If you do not know the sequence number, you can also delete
2. Appearance “T2” means the working duration, ranges from 5-43200 (minutes)
Device 1 the number by SMS command like this: SOS, D,number#
Note: SMS command takes effect after device wakes up.
2.1 Appearance 3M foam tape 1 e.g. SOS, D, 13527852360# means delete this SOS number
E.g.MODE,1,30,5# (Meaning: When device wakes up, it would
User guide 1 directly.
work for 5 minutes, during which period, it uploads locations per
It will reply “OK” if the number is deleted successfully.
Notch 30 seconds.)
2.3 Indicators
5.3 Work Mode 5.4 Tamper Alert
Status Meaning
Flicker quickly Low battery Default: Positioning one time a day. In standby mode, alert message will be uploaded and tracking
Flicker slowly Normal (1) Ultra-long standby mode: device locates only one time every mode will be activated for 20 minutes if device dis-assembly is
OFF Sleep/Power off day and then goes sleep. detected. After 20 minutes, device enters into ultra-long standby

mode. Problems Causes Solutions after the original purchase of the product from the dealer.
If alert release notication received within 20 minutes, the device Poor signal The signal waves are Using the GPS tracker 2. Our obligations are limited to repair of the defect or replacement
will immediately get into ultra-long standby mode; Tamper alert unable to transmit in the places that have the defective part or at its discretion replacement of the product
activated in 3 minutes after power on. itself.
when use the GPS good signal condition.
3. Warranty repairs must be carried out by our Authorized Service
3G Ultra-long Standby GPS Tracker
tracker in the places
that have poor signal Centre. Warranty cover will be void, even if a repair has been
6. Platform & APP attempted by any unauthorized service centre.
reception, such as: tall
4. Repair or replacement under the terms of this warranty does
User Guide
6.1 Login service platform building around or
basement. not provide right to extension or renewal of the warranty period.
Please login the designated service platform to set and operate Unable to Power switch is off Switch to ON 5. The warranty is not applicable to cases other than defects in (Version 1.0)
the device. boot No SIM card Insert SIM card material, design and workmanship.
Unable to SIM card inserted Check SIM card
6.2 Download APP connect to incorrectly Maintenance Record
Please download and install the APP in designated website, APP the network Dirty things exist Clean SIM card
store or Google Play store. above the SIM card Date Serviced by
Invalid SIM card Contact network
supplier
7. Warning Product Model
Not in GSM service Move to service area
Battery specied by manufacturer is recommended. Maintenance area
or service arising from any other accessories is not guaranteed. Poor signal Move to area with
strong signal IMEI Number

Manufacturer assumes no responsibility for any damage caused Fail to locate SIM has no access to Contact network
by non-original accessories. GPRS supplier to get GPRS
service
The lithium battery is non-rechargeable. Always reply “Address Contact supplier
Do not bend or open the battery. inquiry failed” Fault
Do not immerse or burn the battery. Descriptions
Device dis-assembly is strongly forbidden.
Nonprofessionals’ operation may cause device damage.
Warranty instructions and service
1. The warranty is valid only when the warranty card is properly To ensure quickly and correctly use, please read
Troubleshooting this manual carefully before using. Any changes
completed, and upon presentation of the proof of purchase
If you are having trouble with your device, try these consisting of original invoice indicating the date of purchase, to the product appearance, color or accessories
Comments
troubleshooting procedures before contacting a service model and serial No.of the product. We reserve the right to are without notice.
professional. refuse warranty if this information has been removed or changed