GB

PROGRAMME CHART
A. “Door open” indication E. Programme selector
I
F. “Start/Pause” button
This washing machine is equipped with
automatic safety functions which detect and C A G. “Cycle end” button
diagnose faults at an early stage and react D H. “Spin” button
B
appropriately, e.g.: I. Eco monitor
J J. “Reset” button
B. “Service” indication
Acustic noise level :
C. “Water tap closed” indication Washing - 59 dB(A) / 1 pW
Spinning - 1400 rpm 77 dB(A) / 1 pW
D. “Clean pump” indication E F G H - 1200 rpm
- 1000 rpm
75 dB(A) / 1 pW
74 dB(A) / 1 pW

Detergents and Additives Special options

Tempe- Care Max. Type of wash / Notes Pre- Main Softener Pre- Rapid Clean+ Colours Intensiv Easy Rinse Spin Cycle Max
Load wash Wash end Spin
Programme rature Labels wash 15° rinse ironing hold
Speed
- respect the manufacturer's recommendations on the care label
kg rpm
Lightly to normally soiled robust laundry made of cotton, linen, artificial
Mixed 40°C 4.0 fibres and their blends. Effective one-hour programme. Make sure to wash – Yes i – – – i i i i i i Max.
only similar colours together in one wash load.
Normally to heavily soiled towels, underwear, table and bed linen etc.
Cotton 40-60-95°C 6.0
made of cotton and linen. i Yes i i i i i i i i i i Max.

Normally soiled blouses, shirts, overalls, etc. made of polyester (Diolen,

Synthetics 30-40°C 3.0 i Yes i i i i i i i i i i Max.
Fabrics

Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Delicates 30°C 1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses. i Yes i i – – i – – i i i 1000 1)

Wool/
Woollens, labelled with the Woolmark and identified as machine
cold-40°C 1.0 washable, as well as textiles made of silk (keep to care label!), linen, wool – Yes i – – – i – – i i i 1000 1)
Handwsh
and viscose marked as handwashable.
Normally to heavily soiled and robust white cotton laundry.
White 40°C 6.0 Save energy by selecting a lower wash temperature and adding an oxygen-based – Yes i – – i i i i i i i Max.
bleach product, in addition to your detergent.
White and pastel shaded garments made of delicate fabrics.
Colours

Light Gentle wash programme to avoid graying or yellowing of your laundry. Use heavy 1000 1)
colours
40°C 4.0
duty detergent, if necessary also stain removers or bleaches on oxygen basis. i Yes i i – i i – – i i i
Do not use liquid detergent.
Black and dark garments made of cotton, cotton blends and polyester.
Dark 40°C 4.0 Special programme to reduce colour fading and local discolouration. i Yes i i i – i i – i i i 1000 1)
Prefer to use a special liquid detergent for dark garments with this programme.
Normally soiled cotton laundry.
Cotton At 40°C and 60°C most favourable programme in terms of combined water and
40-60°C 6.0
energy consumption for washing cotton laundry. – Yes i – – – i i – i i i Max.
Eco

- Reference programme for the Energy Label.

Briefly worn clothing made of cotton, artificial fibres and blends with
Speed 15’ 30°C 3.0
cotton. Refresh programme. Use lowest recommended detergent amount. – Yes i – – – i – – i i i Max.

Rinse and intensive spin programme.

Rinse & Spin – – 6.0
Same as the last rinse and the final spin in the “Cotton” programme. – – i – – – – i – i i i Max.

Intensive spin programme.

Spin – – 6.0
Same as the spin cycle in the “Cotton” programme. – – – – – – – – – – i i Max.

Drain only - no spinning.

Drain – – –
Alternative method of terminating programme after “Rinse hold”. – – – – – – – – – – – i –

i : option / Yes : dosing required

1) For improved garment care spin speed is restricted in these programmes.

Whirlpool is a registered trademark of Whirlpool USA.

5019 300 00436
 - the sensor technology adapts water, energy and programme duration to the size of your wash load.

CONSUMPTION DATA Power consumption in off-mode 0.16 W / in left-on mode 0.16 W • It is particularly useful if you want to postpone spinning to The indicator on the left is to show that the „Eco monitor“ is
a later time, or if you want to drain only. active. The four indicators next to it show the degree of
Energy Approx. programme duration • The wash programme stops to “Rinse hold” when the
Programme Temperature Load Water (kWh) (hours : minutes) consumption: the less power your programme setting is
(°C) (kg) (l) “Rinse hold” indicator on the display blinks. The “Start/ forecasted to consume, the less indicators will light up. This
without “Rapid” without “Rapid” with “Rapid” Pause” indicator blinks as well. depends on the programme, temperature and options selec-
Mixed 40 4.0 48 0.50 1:00 - Terminate the “Rinse hold” option: ted, and also on the size of the wash load. For that reason,
Cotton 95 6.0 60** 1.90 2:30 - • Press the “Start/Pause” button; the programme will the forecasted degree of power consumption may adapt
Cotton 60 6.0 50 0.80 2:20 1:35 terminate automatically with the final spin cycle for the when the washing machine detects the wash load.
Cotton 40 6.0 59 0.60 2:05 1:15 present wash programme.
• If you do not wish to spin the clothes, turn the “DOOR OPEN” INDICATION
Synthetics 40 3.0 42 0.50 1:20 0:55 programme selector to the “Drain” programme and press Before starting and after end of a programme, the lamp
Delicates 30 1.5 60 0.40 0:46 - the “Start/Pause” button. lights to show the the door can be opened. As long as a wash
Wool/ Handwash 40 1.0 47 0.50 0:40 - “Spin” button programme is running, the door remains locked and must on
White 40 6.0 59 0.70 2:20 - • Every programme has a predefined spin speed. no account be forced open. In case you have an urgent need
Light colours 40 4.0 60 0.45 1:20 - • Press the button to set different spin speed. to open it during a running programme, refer to “Reset” a
Dark 40 4.0 40 0.53 1:40 1:15 • If spin speed “0” is selected, the final spinning is cancelled running programme before the end”.
but intermediate spin peaks remain during rinse.
Cotton * 60 6.0 44 0.69 4:00 - PROGRAMME START
The water is drained out only.
Cotton * 60 3.0 34 0.50 2:30 *** -
SET CYCLE END Open the tap and press the “Start/Pause” button .
Cotton * 40 3.0 34 0.45 2:30 *** - The indicator next to the “Start/Pause” button lights up.
Speed 15´ 30 3.0 20 0.13 0:15 - With this function you can postpone your programme to
When the laundry load is detected or the programme
complete at a later time: press the button to select in how
Consumption values were measured in normalized conditions, in compliance with IEC/EN 60456. In the home, they may vary depending on the individual water supply duration is updated, the display shows an animation.
pressure and temperature, the load and the type of wash. The consumption data indicated are based on an inlet water temperature of approx. 15°C through the cold fill
many hours the programme shall be finished. Thus, it allows
valve as well as the hot fill valve (if available). If your washing machine has a hot fill valve, connection of this valve to hot water supply will lower the energy consumption by you to have your laundry ready at a particular time and to FAILURE INDICATION
reduced heating times, depending on the individual hot fill inlet water temperature. Water and energy consumptions refer to the default setting of the programmes, with profit from more favorable energy rates during the night, for
temperature and load as indicated in the table; selecting any options or changing the spin speed will also change the consumption data.
The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting example. Do not use liquid detergent when activating “Cycle In case of any failures or irregularities, consult the
Guide” in your Instructions for Use). end” option. “Troubleshooting Guide” in your Instructions for Use.
* Reference programmes for Energy Label. For reasons of energy saving, the real water temperature may deviate from the declared cycle temperature.
** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. • The time until the “Cycle end” can be selected in full “Water tap closed”: no or not sufficient inlet water
*** Automatic adaptation of programme duration after detection of wash load hour time segments (1 to 24 h). When you press the
button, the shortest possible time will be displayed; keep ”Service”: failure or malfunction of an electrical
on pressing the button to loop through all the available component
optimize the additive’s efficiency to get better wash
LOAD LAUNDRY, ADD DETERGENTS performance and stain removal. times. To remove it again, keep on pressing the button ”Clean pump”: waste water is not pumped out.
AND SELECT THE PROGRAMME • Use with maximum load. until you see the value “0:00”. Spin speed on display blinks: unbalance during spinning.
Load the laundry, add detergent and turn the programme • Add an appropriate amount of in-wash additive for stain • When you have selected the desired time until the “Cycle
selector tothe desired programme and temperature; the removal (powder) to the main wash chamber, together end”, press “Start/Pause” - the countdown will begin. PROGRAMME END
“Start/Pause” indicator blinks. The spin speed shown on with your detergent (only use powder detergent with this • During the countdown, you can still modify the The “Door open” indicator lights up, and the display shows
the display can be altered by pressing the “Spin” button option). Respect the manufacturer’s dosing instructions. programme setting (select or deselect options, change “End”. After about a quarter of an hour, the washing
If you do not start the programme soon after having • May prolong the programme by up to 15 minutes spin speed etc.). If the modifications prolong the
• Appropriate for use of stain removers and bleaches machine will switch off completely to save energy.
made your choice, the washing machine will switch off programme duration so that it overruns the originally set 1. Turn the programme selector to the “Off/O” position.
automatically after about a quarter of an hour. To switch the on oxygen basis. Chlorine or perborate bleaches time until the “Cycle end”, the programme will start
must not be used! 2. Close the water tap.
washing machine on again, turn the programme selector to immediately. 3. Open the door and unload the machine.
“Off/O” and afterwards to the desired programme again. “Colours 15°” button • Sometimes the programme may finish before the 4. Leave the door ajar to allow the drum to dry.
• Saves energy used for water heating while maintaining a selected time until the “Cycle end” has expired (e.g. for
SELECT ANY DESIRED OPTION good wash result. small loads). In this case, the washing machine will tumble CHANGE PROGRAMME AND/OR OPTIONS
When the combination of programme and additional • Supports colour maintenance when washing coloured the laundry regularly to keep it fresh, until the selected AFTER PROGRAMME START
option(s) is not possible, the indication switch off laundry. “Cycle end” time has expired. During tumbling, the
• Recommendable for lightly soiled laundry without stains. display will show an animation. The tumbling phase can 1. Press the “Start/Pause” button to pause the programme.
automatically. The light blinks.
• Make sure that your detergent is suitable for cold wash be stopped at any time either by pressing any button or
“Prewash” button by rotating the programme selector; the animation will 2. Select the new programme, temperature, any options
temperatures (15 or 20°C). and another spin speed if you want.
• Adds a prewash cycle to the wash programme selected; • Not selectable for Cotton 95°C. stop and the door will unlock in about 1 minute as
prolongs the programme by about a quarter of an hour. 3. Press the “Start/Pause” button again.
indicated on the display. The new programme continues at the same position
• Recommended for heavily soiled laundry (e.g. with sand “Intensive rinse” button
or granular dirt). • More water is added and rinse cycle is prolonged. ECO MONITOR where the previous programme was interrupted.
• Do not use liquid detergent for the main wash when • This option is particularly suitable for areas with very soft Do not add detergent for this programme.
activating the “Prewash” option. water, washing baby linen and helps people with allergies. The „Eco monitor“ gives you a rough feedback about the
power consumption of the programme setting you selected. CANCEL (RESET) A RUNNING PROGRAMME
“Rapid” button “Easy ironing” button As soon as you turn the programme selector to any progra- BEFORE THE END
• Enables quicker washing by shortening the programme • Reduces creasing by an increased water quantity and mme, the „Eco monitor“ is on.
a very gentle spin. The “Reset” button cancels a programme before the end.
duration.
M • Press and hold the “Reset” button for a few seconds;
• Recommendable for only lightly soiled laundry. “Rinse hold” button an animation appears on the display. The water is drained
• Not selectable for Cotton 95°C. • The laundry remains in the last rinse water without
less more out; it may last some time until you can open the door.
“Clean+” button pregressing to the final spin cycle to avoid creasing and
• Choose this option if you use an in-wash additive for prevent colours from changing.
stain removal (powder, for example “Vanish”) - it will
Whirlpool is a registered trademark of Whirlpool USA.
5019 300 00436