KT 200 KjeltecTM distillation unit
Simple and reliable solution for safe and semi-automated
Kjeldahl distillation
The KT 200 KjeltecTM is a convenient and safe distillation unit for rapid
steam distillation. Many other distillations can be performed efficiently     Sample type
with the KT 200. These include sulphur dioxide, cyanide, phenol, alka-        Raw materials and finished products in food,
line direct distillation and alcohol.                                         feed and agriculture
Convenient operations                                                         Parameters
KT 200 KjeltecTM provides a simple and reliable solution for safe and         Nitrogen and protein
semi automated distillations. The addition of alkali and the time inter-
val for distillation can be pre-programmed for consistent results inde-       Technology
pendent of operator.                                                          Kjeldahl and other nitrogen based chemical
                                                                              analysis
Improving safety in the laboratory
A high accuracy bellow pump for accurate reagent dispensing pro-
                                                                              Approvals
vides long term stability in delivery of the alkali. Ensure safe operations
with patented SAfE feature for safe distillation of samples that form         Officially approved (AOAC, EPA, DIN, ISO) for
salt cakes. Additional safety features including safety door, plus level      simplified validation
pins and overpressure sensors for the steam generator.
Effective laboratory operations
Running costs are low through optimised applications. Downtime
and service costs are minimised using selected components. A routine
maintenance schedule supports GLP routines.
Specifications
    Performance data at 230 V
    Distillation time                       4 minutes at 30 mg N (7 min at 200 mg N)
    Distillation capacity                   ~ 30 ml/min
    Measuring range                         0.1 – 200 mg N
    Reproducibility                         1% RSD (including the digestion step)
    Recovery                                > 99.5% at nitrogen levels between 1 – 200 mg N
    Reagent pump volumes                    0 – 150 ml in steps of 10 ml
    Delay                                   12 seconds
    SAfE (Patented)                         2 seconds
    Installation requirements
    Power supply                            200-240 V 50 – 60 Hz
                                            2 l/min at water temp of 30°C (During distillation only)
    Water consumption
                                            1 l/min at water temp of 15°C
    Power consumption                       2200 W
    Ambient temperature                     Max 40ºC
    Ambient humidity                        Max. 80% relative
    Drain                                   For cooling water only
    Weight netto                            25 kg
    Dimensions (w x d x h) cm               30 x 28 x 77
Accessories
• Titration unit complete, 50 ml
• Adapter for Büchi tubes
• Basket for 12 receiver flasks (250/300 ml)
• Receiver flasks, 250 ml (set of 10)
• Kjeltec DD kit for direct distillation (DD) procedure comprising 12 distilling tubes (750 ml), 12 receiver flasks (300 ml),
  stand for tubes, basket for flasks and application note
• Handling device for digestion tubes
FOSS
Tel.: +45 7010 3370
info@foss.dk · www.fossanalytics.com
GB, September 2021