Scribd
Upload
71 views4 pages

25 SWRO MF Datasheet

This document provides specifications for a 25,000 liter per day seawater desalination system. Key features include a 7-inch touch panel for monitoring, up to 40% water recovery depending on salinity and temperature, and automatic backwashing of filters. It uses 5 micron cartridge filters, an antiscalant dosing system, and various meters. Components contacting seawater and brine are made of materials like PVC, duplex, or super duplex steel. The unit has a 5 kW motor and processes up to 48,000 ppm feed water between 5-40 degrees Celsius.

Uploaded by

Alb Fir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
71 views4 pages

25 SWRO MF Datasheet

This document provides specifications for a 25,000 liter per day seawater desalination system. Key features include a 7-inch touch panel for monitoring, up to 40% water recovery depending on salinity and temperature, and automatic backwashing of filters. It uses 5 micron cartridge filters, an antiscalant dosing system, and various meters. Components contacting seawater and brine are made of materials like PVC, duplex, or super duplex steel. The unit has a 5 kW motor and processes up to 48,000 ppm feed water between 5-40 degrees Celsius.

Uploaded by

Alb Fir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

25-SWRO-MF Main features:

Seawater desalination system ✔ Control, full color 7” touch panel for easy system
Data sheet monitoring
✔ Total recovery up to 40% depends on water TDS
and temperature
✔ Feed pressure below minimum stops the unit
✔ Automatic flush system
✔ Automatic backwash of media filter & manual of
bag filter
✔ 5 micron absolute cartridge filters for RO protection
✔ Antiscalant dosing system
✔ Measurement:
• 3 x low pressure
• 1 x high pressure
• 1 x flow meters (product water)
• Conductivity & temperature of product water
✔ All parts in contact with high seawater and brine
made of PVC, duplex or super duplex steel
✔ Powder coated frame made of stainless steel
AISI304
✔ Input for min/max in product water tank
Hydraulic data Electrical data
PARAMETERS UNITS PARAMETERS UNITS
Permeate production capacity of the desalination l/day 25 000 Electromotor power kW 5
block, up to*
Nominal power kW 6
Operating pressure in Hydraulic System bar 40 - 65
Shaft speed – HP pump rpm 1450
Total dissolved solids, permeate (TDS) mg/l <500
Supply voltage VAC 400±10% (3 ph) or
Feed water system pressure bar 3–5 230V (1 ph) on
special order
Total dissolved solids range, feed water (TDS) mg/l 20000 – 48 000
Supply frequency Hz 50/60
Source water flow rate m3/h 3,0 – 3,3
Consumption current А 9,5
Feed water temperature °С from 5 to 40
Protection class IP54
Ambient temperature °С from 5 to 50
Energy consumption per 1 hour kWh 4,7
Energy consumption per 1 m3 of permeate kWh 3,8
Salt rejection, up to % 99,8
Membrane area m2 40,6
* for 25ºC and 32000ppm

Construction details
Desalination block (LxWxH) | mm 2000 x 1200 x 2050
Weight | kg 750
Seawater inlet DN32 OSV
Brine & permeate outlet, wash water inlet DN32 OSV
Membrane element Hydranautics SWC6 MAX 8”
High pressure pump & recovery device APPR43

You might also like