BA Cover CX70.QXD 17.08.

2004 14:19 Uhr Seite 1

s s
mobile mobile

Issued by
Information and Communication mobile
Haidenauplatz 1
D-81667 Munich

© Siemens AG 2004
All rights reserved. Subject to availability.
Rights of modification reserved.

Siemens Aktiengesellschaft
www.siemens-mobile.com
Designed for life

CX70
CXT70
CXV70
 right page (1) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:29)

VAR Language: en; VAR issue date: 040728

Table of Contents 1

Table of Con- Safety precautions ..................... 3 Phonebook ............................... 35

tents New entry .............................. 35
Telephone list (schematic) ......... 5
Display symbols ......................... 7 Call (search for an entry) ........ 36
Getting started ........................... 9 Change entry ......................... 36
Inserting the SIM card/ <Special books> ..................... 37
battery ..................................... 9 Call records ............................... 38
Charging the battery .............. 10 Durat/charges ........................... 39
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_IVZ.fm

Changing CLIPIt™ covers ........ 11 Camera ..................................... 40

Switching phone on and off/ Photo mode ........................... 40
entering PIN ............................. 12 Video mode ............................ 41
See also In- Enter PIN ............................... 12 Inbox ........................................ 42
dex at the end Emergency number (SOS) ....... 12 SMS ........................................... 43
of this User Write/send .............................. 43
General instructions ................ 13
Guide
Standby mode ....................... 13 Read ....................................... 45
Signal strength ...................... 13 Setting ................................... 47
Digital Rights Mgmt. (DRM) ..... 13 MMS ......................................... 49
Main menu ............................ 13 Create ................................... 49
Standard functions .................. 15 Templates .............................. 51
Highlighting mode ................. 16 Sending an MMS .................... 52
Menu speed dialling ............... 16 Receiving an MMS .................. 53
Security .................................... 17 Reading an MMS .................... 54
Codes .................................... 17 Setting ................................... 55
Preventing accidental E-mail ........................................ 57
activation ............................... 18 Write ...................................... 57
Text entry ................................. 19 Receive/read ........................... 58
Calling ...................................... 23 Setting ................................... 59
My phone ................................. 29 Inst. message ........................... 61
Default book ............................ 30 Start menu ............................. 61
Addressbook ............................ 31 Login ..................................... 62
New entry .............................. 31 Contact lists ........................... 62
Change entry ......................... 33 Start chat ............................... 65
Dialling an entry .................... 33 Msg. history ........................... 66
Groups ................................... 34 Setting ................................... 66

See also Index at the end of this User Guide

 left page (2) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:29)
VAR Language: en; VAR issue date: 040728

2 Table of Contents

Voice message/mailbox ........... 68 Extras ...................................... 107

CB services ............................... 69 Walky Talky .......................... 107
Surf & fun ................................. 70 SIM services (optional) ......... 112
Internet ................................ 70 Alarm clock .......................... 112
Bookmarks ............................. 72 Sound recorder ..................... 113
Emoty .................................... 72 Calculator ............................. 114
Games and Applications ......... 73 Unit converter ...................... 115
Downl. assist. ......................... 73 Stopwatch ............................ 116

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_IVZ.fm

Setup ........................................ 75 Countdown .......................... 116
Profiles .................................. 75 Remote synchronisation ....... 117
Themes .................................. 77 Device manag. ..................... 118
Dynamic light ........................ 78 Media player ........................... 120
Display ................................... 79 My stuff .................................. 121
Ringtones .............................. 81 Mobile Phone Manager .......... 123
Phone Pilot ............................ 83 Questions & Answers ............. 125
Call setup ............................... 84
Customer Care ........................ 128
Phone setup ........................... 86
Care and maintenance ........... 130
Clock ..................................... 88
Product data ........................... 131
Connectivity .......................... 89
Security ................................. 93 Quality .................................... 132
Network ................................ 95 Accessories ............................. 133
Accessories ............................ 97 Guarantee certificate (UK) ....... 135
My menu .................................. 98 Guarantee certificate (IRL) ....... 136
Fast access key ......................... 99 SAR – European Union
Organiser ............................... 101 (RTTE) ..................................... 138
Calendar .............................. 101 SAR – International
Appointments ...................... 102 (ICNIRP) .................................. 139
Tasks ................................... 103 Menu tree ............................... 140
Notes ................................... 104 Index ....................................... 146
Missed appts. ....................... 104
Dictat.machine .................... 105
Time zones .......................... 106

See also Index at the end of this User Guide

 right page (3) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Safety precautions 3

Safety precautions
Information for parents
Please read the operating instructions and safety precautions carefully before use.
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_SecurityInfo.fm

Explain the content to your children and the hazards associated with using the phone.

Remember to comply with Only use original Siemens bat-

legal requirements and local re- teries (100 % mercury-free) and
strictions when using the charging devices. Otherwise
phone. For example, in aero- you risk serious damage to
planes, petrol stations, hospi- health and property. The battery
tals or while driving. could explode, for instance.
Mobile phones can interfere Do not use an optical magnifier
with the functioning of medical to look at the activated infrared
devices such as hearing aids interface [Class 1 LED product
or pacemakers. Keep at least (classification as per
20 cm between phone and IEC 60825-1)].
pacemaker. When using the
mobile phone hold it to the ear Small parts such as the
which is further away from the SIM card, sealing stop, lens ring
pacemaker. For more informa- and lens cap can be dismantled
tion consult your doctor. and swallowed by small chil-
dren. The phone must therefore
Ringtones (p. 81), info tones be stored out of the reach of
(p. 86) and handsfree (p. 25) small children.
talking are reproduced through
the loudspeaker. Do not hold The mains voltage specified on
the phone to the ear when it the power supply unit (V) must
rings or when you have not be exceeded. Otherwise
switched on the handsfree func- the charging device may be
tion. Otherwise you risk serious destroyed.
permanent damage to your
hearing. Do not open the phone. Only re-
placing the battery or SIM card
is permissible. You must not
open the battery under any cir-
cumstances. Any other chang-
es to this device are strictly
prohibited and will invalidate the
operating licence.
 left page (4) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

4 Safety precautions

Important
Please dispose of unwanted
batteries and phones as permit-
ted by the laws in your country.

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_SecurityInfo.fm

The phone may cause interfer-
ence in the vicinity of TV sets,
radios and PCs.

Use only Siemens original ac-

cessories. This will avoid poten-
tial risks to health or property
and ensure compliance with all
relevant regulations.

Improper use will invalidate the guarantee!

These safety instructions also apply to
Siemens original accessories.

Improved data transmission

In order for your phone to be able to trans-
mit data at higher speeds, it is necessary to
have a good connection to the network.
Transmitting data can be delayed by the
process of establishing a connection. To
comply with guidelines on the effects of ra-
dio waves, you should keep the phone a
distance of 22 mm from your body while
transmitting data.
 right page (5) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Telephone list (schematic) 5

Telephone list (schematic)

1 A Call key
Dial phone number/name displayed/
highlighted, take calls. Show last phone
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Overview.fm

numbers dialled in standby mode.

2 B On/Off/End key Z £ X
• Switched off: Press and hold to
switch on. Service provider
• During a conversation or in an appli-
cation: press briefly to finish.
• In menus: Press briefly to go back
a level. Press and hold to go back to 01.10.2004 10:10
standby mode. NewMMS í Ï
• In standby mode: Press and hold to
switch off phone.
3 Joystick
C Press the joystick down verti-
cally to start an application or
function (p. 14).
In standby mode:
C Open main menu.
G Open user profiles.
4 Soft keys
H Open
book.
Phonebook/Address-
The current functions of this key are
E Inbox open shown in the bottom line of the display
as §Text§/symbol (e.g. p).
D Start the camera. 5 Additional key for WAP access
In lists, messages and menus: (if required, and no other default setting
is made).
I Scroll up and down.
D Back one level.
During a call:
I Set volume.
E Call options.
 left page (6) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

6 Telephone list (schematic)

1 Integrated antenna
Do not obstruct the phone above the
battery cover unnecessarily. This
reduces the signal quality.
2 LED for Dynamic Light (p. 78)

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Overview.fm

Z X
3
£
Loudspeaker
4 Display Service provider
5 Infrared interface (IrDA)
6 Input keys
7 * Ringtone 01.10.2004 10:10
• Press and hold in standby mode: NewMMS í Ï
Switch all audible signals on/off
(except alarm).
• Press and hold on incoming call:
Switch off ringtone for this call only.
8 # Key lock
Press and hold in standby mode:
Switch key lock on/off.
9 Connection socket
For charger, headset, flash, etc.
: Connection for external antenna
11 Camera lens
12 Mirror (depending on telephone
model)
 right page (7) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Display symbols 7

Display symbols
Display symbols (selection) Alarm set
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Displaysymbols.fm

¹
Z Signal strength Ä Keypad locked
Y Charging Å Auto answer feature on
W Battery charge level, e.g. 50 % T9Abc Text input with T9
L Phonebook £ Activated and available
P Records ¢ Registered
O Surf & fun Temporarily interrupted
Service supplier portal
¤
± Browser Offline
Q Organiser
² Browser online
M Messages
³ Browser via GPRS online
R Camera
´ Browser no network
S Extras
¯ IrDA activated
N File management
® IrDA transmission
T Settings
Events (selection)
All calls are diverted
SMS memory full
Ç ã
Ringing tone off
MMS memory full
¿ ä
Short ring (beep) only
Phone memory full
¾ å
Ringer only if the caller is stored
No network access
¼ in the Phonebook. Æ
 Missed call
Ê Memory assistant
 left page (8) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

8 Display symbols

Message symbols (selection) Camera symbols

p Unread Ñ/Ò Switches between
photo and video
Read

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Displaysymbols.fm

q
Ù Brightness
r Draft
Ú Zoom factor
s Sent
Û White balance
t MMS not sent
Flash connected
MMS received
w ×
x MMS read
y MMS with DRM contents (p. 13)
z E-mail forwarded
{ E-mail with attachment
À Voice mail received
 right page (9) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Getting started 9

Getting started
3
Inserting the SIM card/
battery
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Startup.fm

The service provider supplies you with

a SIM card on which all the important
data for your line is stored. If the SIM
card has been delivered in credit-card • Insert the battery sideways into
size, snap the smaller segment out the phone 4, then press it down-
and remove any rough edges. wards 5 until it engages.
Additional information
Please switch off your phone before 5
removing the battery!
Only 3 V SIM cards are supported. Please 4
contact your service provider if you have an
older card.
SIM card problems ..........................p. 126
• Press the grooved area 1, then
push cover towards the front in the
• To remove, press the retaining tab
direction indicated by the arrow 2.
on the side of the battery, then lift
the battery out.
1
• Place the battery cover, then push
it towards the front 6, until it
clicks into place.
2

• Place the SIM card in front of the 6

slot with the contact surface fac-
ing downwards. Then press the
SIM card slightly to push it in 3
(ensure that the chamfered corner
is in the correct position).
 left page (10) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

10 Getting started

Charging the battery reduce the phone’s standby time.

Avoid placing the phone in the sun
Charging the battery or on a heater.
Call time: 100 to 330 minutes
The battery is not fully charged when
Stand-by time: 60 to 300 hours
delivered. Plug charger cable into the
bottom of the phone, plug power
Charge icon not visible

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Startup.fm

supply unit into a mains power socket
and charge for at least two hours. If the battery has been discharged
fully, the charge icon is not immedi-
As an alternative, the battery can be
ately visible when the power supply
charged via the USB port (see
is plugged in. It will appear after up
Accessories, p. 133).
to two hours. In this case the battery
is fully charged after 3 to 4 hours.
Only use the plug-in power supply
included in delivery!

Display while in service

Charge level display during opera-
tion (empty–full):
Y Display during charging.

Charging time
VWX
A beep sounds when the battery is
An empty battery is fully charged nearly empty. The charge level of the
after about 2 hours. Charging is only battery is only displayed correctly
possible within a temperature range after an uninterrupted charging/dis-
of +5 °C to 45 °C. If the temperature charging cycle. You should therefore
rises/falls 5 °C above/below this, the not remove the battery unnecessarily
charge symbol flashes a warning. and where possible not finish the
The mains voltage specified on the charging process prematurely.
power supply unit must not be
Additional information
exceeded.
The power supply unit heats up when used
Operating time for long periods. This is normal and not
dangerous.
The operating time depends upon If the battery is removed for longer than
the respective conditions of use. 30 seconds, the clock must be reset.
Extreme temperatures considerably
 right page (11) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Getting started 11

Changing CLIPIt™ Assembling the phone

covers Remove the old keypad mat and
insert the new keypad mat 3 into
You can use CLIPIt™ covers (accesso- the faceplate. Take care that it is cor-
ries) to adjust the appearance of rectly positioned.
your phone according to your per-
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Startup.fm

sonal taste.
Please switch the phone off before 3
changing the keypad mat or face-
plate.

Dismantling the phone

Remove battery cover (see p. 9). To
remove the faceplate, insert the key
into the opening, apply slight
Insert the phone into the bottom of
pressure 1 and turn it at the same
the faceplate 4 and then push it in
time 2 to open the lock.
carefully until it clicks into position 5.

2
4
1

CLIPit™ Covers
The new keypad has an additional key
beneath the joystick to permit direct access
to the Internet information from the service
provider.
 left page (12) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

12 Switching phone on and off/entering PIN

Switching phone on and off/entering PIN

Switching phone on and Switching on your phone
off for the first time
Press and hold the On/

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Startup.fm

B Off/End key. Time/date
During commissioning, set the clock
Enter PIN so that it displays the correct time.
You will not have to make this set-
The SIM card can be protected with ting again.
a 4 to 8-digit PIN.
Press this key, then select
Enter the PIN using the
C §Change§.
J number keys. The charac-
First enter the date (day/
ters **** appear to J month/year), then the
ensure nobody can read
time (24 hours, including
your PIN on the display.
seconds).
Correction with ].
Press this key. The time
Confirm by pressing the C and date are updated.
joystick. Logging on to
C
the network will take Time zones
a few seconds.
F Set the time zone you
Additional information are in.
Change PIN.......................................p. 17 Select a city in the desired
Clear SIM card barring ......................p. 18 I time zone .
§Options§ Use Set time zone to save.
Emergency number Copying SIM addresses
(SOS) The first time the SIM card is
Only to be used in real emergencies! inserted, the entries on it can be cop-
By pressing the soft key §SOS§ you can ied to the Addressbook. Please do not
make an emergency call on any net- interrupt this procedure. During this
work without a SIM card and without time, do not accept incoming calls. Fol-
entering a PIN (not available in all low the instructions in the display.
countries). You can also copy data from the
SIM card at a later time (p. 36).
 right page (13) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

General instructions 13

General instructions
Standby mode Main menu
The phone is in standby mode and is The main menu is displayed graphi-
ready for use when the name of the cally with symbols:
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Startup.fm

service provider appears on the Call up from standby

display. C mode.
Press and hold the On/Off/ Select the application
End key to return to
B FI symbols.
standby mode from any
situation. C Start an application.

Signal strength Main menu options

§Options§ Open menu.
Z Strong signal strength.
Different functions are available
A weak signal reduces the
[ depending on the context:
call quality and may lead
to loss of the connection. Big letters Selection between two
Change your location. font sizes.
Illumination Set display light brighter/
Digital Rights Mgmt. darker.
(DRM) Help Display of a help text.
Remember that your telephone has Search List output of the menu.
digital rights management. The use Entering letters will ac-
of downloaded pictures, sounds or cess a function directly.
applications can be restricted by the
suppliers, e.g. copy protection, use
for a limited period of time only,
number of times it can be used etc.
(see also p. 74).
 left page (14) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

14 General instructions

User guide Symbols

The following symbols are used to
Menu controls explain operation:
The steps needed to reach a function Enter numbers or
are shown in a condensed form in the J letters.
user guide, e. g. to display call list for

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Startup.fm

missed calls in condensed form: B On/Off/End key.
C ¢P ¢Calls missed A Call key
This comprises the following steps:
<> Soft keys
C Open the main menu. Displays a soft-key function.
§Menu§
Select P, then function
G Press the joystick vertically,
Calls missed. C e.g., to call up the menu.
C Confirm. DFE Press the joystick in the
direction indicated.
H I G
Function dependent on
= service provider, may
require special registration.

C Press joystick
The symbol in the centre of the
lower line of the display shows the
current function when the joystick is
pressed down vertically.
í Display menu
î Take photos
ï Zoom
ð Call, accept call
ì OK
 right page (15) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Standard functions 15

Standard functions
Option menus Text input T9 preferred: Activate/
Functions which appear repeatedly (p. 19) deactivate T9 input.
in the options menu are listed here. Input language: Select
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Startup.fm

language for text.

§Options§ Open menu.
Rename Rename selected entry.
Edit Open the entry to edit.
Capacity Display memory capacity.
View Display entry.
Attributes Display properties of the
Delete/ Delete entry/delete all highlighted object.
Delete all entries after confirmation.
Help Display help text.
New entry Create new entry.
Send... Select transmission service
and medium for sending or
printing.
Reply/ The sender becomes the
Reply to all recipient, "Re." is placed in
front of the subject matter
and the received text is
transferred into the new
message.
Save Store entry.
Save to 9 Save recipients in the cur-
rent address directory.
Sort Set sort criteria (alphabeti-
cal, type, time).
 left page (16) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

16 Standard functions

Highlighting mode Menu speed dialling

With some applications (e.g. Phone- All menu functions are numbered
book/Addressbook) one or more internally. A function may be
entries in a list can be highlighted to selected directly by entering these
carry out a function jointly. numbers in sequence.
§Options§ E.g., write new SMS (from standby

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Startup.fm

Open menu.
Mark Activate highlighting mode):
mode. Press this key to display
If a non-highlighted entry is selected,
C the main menu.
this can be highlighted: Press this key for
§Mark§ The current entry is high-
5 Messages.
lighted. Press this key to
If a highlighted entry is selected, the
1 Write message.
highlighting can be deleted:
1 Press this key for SMS.
§Unmark§ Dehighlight the current
entry.
Additional highlighting functions:
Mark all Highlight all entries.
Unmark all Delete highlighting on all
marked entries.
Delete All selected entries are
marked deleted.
 right page (17) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Security 17

Security
The phone and SIM card are pro- C ¢T¢Security
tected against misuse by several ¢Codes
security codes. ¢Select function.
Keep these confidential numbers in PIN control
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Startup.fm

a safe place where you can access

them again if required. The PIN is usually requested each
time the phone is switched on. You
can deactivate this feature but you
Codes risk unauthorised use of the phone.
Some service providers do not
PIN Protects your SIM card (per-
permit deactivating the control.
sonal identification number).
§Select§ Press this key.
PIN2 This is needed to set the charge
detail display and to access J Enter PIN.
additional functions on special
SIM cards. C Confirm input.
PUK Key code. Used to unlock
PUK2 §Change§ Press this key.
SIM cards after the wrong PIN
has been entered repeatedly.
C Confirm.
Phone Protects your phone. Must be
code entered at the first security Change PIN
setting.
You can change the PIN to any
4 to 8-digit number you find easier
to remember.

J Enter current PIN.

C Press this key.

J ,C Enter new PIN.

J ,C Re-enter new PIN.

 left page (18) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

18 Security

C ¢T¢Security Preventing accidental

¢Codes
¢Select function. activation
Even if PIN use is deactivated (p. 17)
Change PIN2 confirmation is required to switch on
(Display only if PIN2 is available). the phone.

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Startup.fm

Proceed as with Change PIN. This prevents accidental activation
of the phone, e.g. when you are
Chg.phonecode carrying it in a bag or when you are
(Change phone code) travelling in an aircraft.
You define the phone code (4–8 dig- Press down.
its) when you call up a phone-code B
protected function for the first time Press. The phone switches
(e.g. Direct call, p. 27). It is then valid C on.
for all phone-code protected func-
§Cancel§ Press or take no action.
tions.
The phone does not
Following the third unsuccessful
switch on.
attempt, access to the phone code
and the functions that use it is
denied. Contact the Siemens Service Connecting to Windows®
(p. 128). PCs
You can connect your phone using
Clearing SIM card barring IrDA or a data cable (accessories,
If the PIN is entered incorrectly three p. 133) to a Windows® PC. The
times, the SIM card is barred. Enter Windows® PC program MPM (Mobile
the PUK (MASTER PIN) provided by Phone Manager, p. 123) enables you
your service provider with the to backup data on your Windows®
SIM card in accordance with the PC and to synchronise the
instructions. If the PUK (MASTER PIN) Addressbook with Outlook®, Lotus
has been lost, please contact your Notes™ and other Siemens phones
service provider. (as well as Gigaset). You can
download the Mobile Phone
Manager from the Internet at
www.siemens-mobile.com/cx70
 right page (19) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)

VAR Language: en; VAR issue date: 040728

Text entry 19

Text entry
Text entry without T9 * Press briefly: Special char-
acters are shown.
Press number key repeatedly until
the required letter appears. After a Press and hold: Open input
brief interval the cursor will advance. menu.
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Text.fm

Example: Press once/repeatedly:

Press once briefly to type
0 .,?!’"0+-()@/:_
2 the letter a, twice to type Press and hold: Writes 0.
b etc.
Writes blank. Press twice
Press and hold to write the 1 = jumps a line.
number.
Ä, ä, 1–9 Umlauts and numbers are
displayed after the rele-
Special characters
vant letters. Press briefly. The symbols
chart is displayed
*
] Press briefly to delete the
letter before the cursor, 1) ¿ ¡ _ ; ! ? , .
press and hold to erase the
+ - " ’ : ( ) / *
whole word.
¤ ¥ $ £ € & # \ @
F Move the cursor
(forwards/back). [ ] { } % ~ < = >
Press briefly: Swap | ^ § Γ ∆ Θ Λ Ξ Π
# between abc, Abc, T9abc, Σ Φ Ψ Ω
T9Abc, T9ABC, 123. Status
1) Line break
shown in top line of dis-
play. I, F Navigate to characters.
Press and hold: All input-
§Select§ Confirm.
variants are displayed.
 left page (20) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)
VAR Language: en; VAR issue date: 040728

20 Text entry

Input menu §Select§ Confirm, the new lan-

guage is set. Languages
With text input: with T9 support are
Press down: The input marked with the
* menu is displayed: T9 symbol.
Text format (SMS only)
Writing with T9
Input language

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Text.fm

Since the display changes as you
Mark proceed,
Copy/Insert it is best if you finish a word without look-
ing at the display.
Text entry with T9 Simply press the keys once only
"T9" deduces the correct word from where the relevant letter is located.
the individual key entries by making For "hotel", for example:
comparisons with an extensive dic-
tionary. # Press briefly for Abc then T9

Activate, deactivate T9 46835

§Options§ Open text menu.
Text input Select. 1 A blank ends a word.
T9 preferred Do not use special characters such as
Select. Ä but rather use the standard charac-
§Change§ Activate T9. ters, e.g. A; T9 will do the rest for
you.
Select input language T9® Text Input is licensed under one or more of
Select the language in which you the following:
U.S. Pat. Nos. 5,818,437, 5,953,541,
want to compose your message. 5,187,480, 5,945,928 and 6,011,554;
§Options§ Open text menu. Canadian Pat. No. 1,331,057;
United Kingdom Pat. No. 2238414B;
Text input Select. Hong Kong Standard Pat. No. HK0940329;
Input language Republic of Singapore Pat. No. 51383;
Euro.Pat. No. 0 842 463 (96927260.8)
Select. DE/DK, FI, FR, IT, NL, PT, ES, SE, GB;
and additional patents are pending worldwide.
 right page (21) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)

VAR Language: en; VAR issue date: 040728

Text entry 21

T9 word suggestions Correct a word

If several options are found in the F Move left or right, word
dictionary for a key sequence by word, until the
(a word), the most probable is dis- required word is
played first. If the word you want has §highlighted§.
not been recognised, the next sug- Scroll through the T9
gestion from T9 may be correct. ^
word suggestions again.
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Text.fm

The word must §highlighted§ be dis- ] Deletes the character to

played. Then press the left of the cursor and
again. The displayed word displays a new possible
is replaced with a differ- word!
^
ent word. If this word is
also incorrect, press Additional information
Within a "T9-word", individual letters may
again. press until the cor- not be edited without first removing the
rect word is displayed.
^
T9-status. In most cases it is better to
If the word you want is not in the dic- rewrite the complete word.
tionary, it can also be written with- Set a full stop. The word is
out T9. 0 concluded if it is followed by
a space. Within a word, a full
To add a word to the dictionary: stop represents an apostro-
§Spell§ Select. phe or hyphen:
The last suggestion is deleted and e.g. §provider.s§ = provider’s.
the word may now be entered with- Moving the cursor to the right
out T9 support. Press §Save§ to add it
E ends the word.
automatically to the dictionary.
Press briefly: Switch
# between: abc, Abc, T9abc,
T9Abc, 123. Status shown in
top line of display.
Press and hold: All input
modes are displayed.
Press briefly: Select special
* characters (p. 19).
Press and hold: Open input
menu (p. 20).
 left page (22) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)
VAR Language: en; VAR issue date: 040728

22 Text entry

Text modules Use text modules

Text modules can be stored in the Write message
phone for adding to your messages
J (SMS, MMS, e-mail).
(SMS, MMS, e-mail). §Options§ Open text menu.
§Insert§ Select.
Write text modules
Select Text modules.
C ¢M¢Text modules

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Text.fm

I
Select text module from
§Options§ Select New text. I the list.
J Write text module. §Select§ Confirm. The text module
is displayed.
§Options§ Open menu and select
Save. Accept the specified Confirm. The text module
name or allocate a new
C is inserted in the message
one. to the right of the cursor.
C Save.
 right page (23) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Calling 23

Calling
Dialling with number Set volume
keys Regulate the volume
I (only possible during
The phone must be switched on
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Phone.fm

a call).
(standby mode).
If a Car Kit is used, its volume setting
Enter the number (always
will not affect the usual setting on
J with prefix/international
the phone.
dialling code).
] A short press clears
the last digit, a long press Redial previous numbers
clears the entire phone To redial the phone number last
number. called:
Press the Call key. The dis-
Press the Call key twice.
A played phone number is A
dialled. To redial other numbers that were
dialled previously:
End call Press the Call key once.
Press the End key briefly.
A
B Press this key even if the Pick out the phone
person on the other end I number from the list.
of the line has hung up Press this key to select the
first. A phone number.
 left page (24) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

24 Calling

If the number is busy Reminder

If the called number is busy or can- §Prompt§ A beep reminds you to
not be reached because of network redial the displayed
problems several options are availa- phone number after
ble (depending on the service pro- 15 minutes.
vider). An incoming call or any other
Additional information

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Phone.fm

use of the phone interrupts these
functions. Ð Store phone number in the
Addressbook/Phonebook.
Either §Handsfr.§ Handsfree switch on (play-
back from loudspeaker).
Auto redial
Always switch off "handsfree
§Auto dial§ The phone number is talking" before holding the
automatically dialled ten phone to your ear! Otherwise,
times at increasing time you will damage your hearing!
intervals. End with: Press and hold to switch
* microphone off.
B End key.
International dialling codes
Or
Press and hold until a "+" is
Call back b
0 displayed.
§Country§ Press and select country.
§Call back§ Your phone rings when
the busy number is free. Phone number memo
Press the Call key to dial You can enter a phone number during the
the number. call. The person to whom you are speaking
can hear these entries. When the connec-
tion has ended you can save or dial the
phone number.
 right page (25) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Calling 25

Accept call Handsfree

The phone must be switched on. An You can put the phone aside during
incoming call will interrupt any other a call. You can then hear the caller
use of the phone. via the loudspeaker.
§Handsfr.§ Activate handsfree
C Press.
talking.
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Phone.fm

Or
C Switch on.
Press.
A Use the joystick to adjust
A phone number and the name of
I the volume.
the caller transmitted by the net- §Handsfr.§ Deactivate.
work will be displayed if the number
is saved in the Phonebook/Address- Warning!
book. A picture of the caller may also Always switch off "handsfree talking"
be displayed (p. 32). before holding the phone to your ear! Oth-
erwise, you will damage your hearing!
Reject call
§Reject§ Press. Swapping between
Or 2 calls b
B Press briefly. Establish a second connection
You can call another number during
Warning! a call.
Please make sure you have accepted the §Options§ Open call menu.
call before holding the phone to your ear.
This will avoid damage to your hearing from Hold The current call is put on
loud ringtones. hold.
Additional information Now dial the new phone
Press and hold to switch off
J number or
the ringing tone and vibration.
* §Options§, select the Phone-
 Missed call display. book, Addressbook, or
phone number.
When the new connection is
established:
§Swap§ Swapping between calls.
 left page (26) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

26 Calling

Incoming calls during a call Ending call(s)

You may need to register for this serv- B Press the End key.
ice with your service provider and set
your phone accordingly (p. 84). Dur- After the Return to held call? display,
ing a call, you may be advised that you have the following selection:
there is another call waiting. You will §Yes§ You accept the call on

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Phone.fm

hear a special tone during the call. hold.
You have the following options: §No§ You end the 2nd call.
• Accept the waiting call in addition
to the first
Conference b
§Swap§ Accept the waiting call,
putting the current call on Call up to 5 parties one by one and
hold to do so. link them together in a multiparty
call. Some of the functions described
Always proceed as above to swap may not be supported by your serv-
between the two calls. ice provider or may have to be ena-
• Reject the waiting call bled specially.
§Reject§ Press. A connection has already been
Or established:
§Divert§ The waiting call is divert- §Options§ Open menu and select
ed, for example, to the Hold. The current connec-
mailbox. tion is maintained.
• Accept the waiting call and end the Now dial a new number.
current call
J When the new connec-
tion is established ...
B End the current call. §Options§ … open menu and select
Conference. The held call is
Accept new call.
C joined.
Repeat procedure until all partici-
pants are linked together (up to
5 participants).

End
All calls in the multiparty
conversation are ended
B
when the End key is
pressed.
 right page (27) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Calling 27

Call options Direct call

The following functions are only If this is active, only one number can
available during a call: be dialled.
§Options§ Open menu.
Switch on
Hold Maintain current call. ¢T¢Security
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Phone.fm

C
Micro- If switched off, the person ¢Direct call
phone on on the other end of the line
cannot hear you (muting). C Confirm selection.
Also: Press and hold *. Enter phone code.
J
Handsfree Call via the loudspeaker.
When first prompted you define and
Volume Adjust handset volume. enter the phone code (4–8 digits).
Default Phonebook/Addressbook. C Confirm selection.
book
Conference (p. 26) Please do not forget this code (p. 17)!
Time/ Display duration of call up Ï/ J Select phone number
charge from the Phonebook/
to now and (if set) the
charges incurred while the Addressbook or enter it.
call is in progress.
C Confirm.
Send DTMF Enter tone sequences
(numbers) for remote Apply
inquiries to an answering
machine. §Carol§ To dial the phone number
(e.g. Carol’s phone num-
Call Connect current call to a ber), press and hold the
transfer= second call. For you, both right display key.
calls are now ended.
Main menu Access to the main menu. Switch off
Call status List all held and active calls # Press down:
(e.g. participants in a con-
ference). J Enter phone code.

C Confirm input.
 left page (28) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

28 Calling

Tone sequences (DTMF) Using the Phonebook/

You can, for example, enter control Addressbook
codes (numbers) for remote access Store phone numbers and control
to an automatic answering machine codes (DTMF codes) in the Phone-
while another connection exists. These book/Addressbook in the same way
entries are transmitted directly as as a normal entry.

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Phone.fm

DTMFcodes (control codes).
Enter phone number.
§Options§ Open menu. J
Send DTMF Press until a "+" appears in
Select.
0 the display (wait for the
connection to be estab-
lished).
Enter DTMF codes
J (numbers).
If necessary, wait again
0 for three seconds at a
time for the receiver to
process the entries safely.

J Enter a name.

§Save§ Store entry.

You may also store just the DTMF
codes (numbers) and then send
them during the call.
 right page (29) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

My phone 29

My phone
Adjust your phone according to your Where do I get what?
own wishes in the following ways to
You can purchase additional ring-
give it a personal touch:
tones, logos, animations and Java
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_MyPhone.fm

Ringtones (p. 81) applications from your service pro-

Assign individual ringtones to caller vider or directly from Siemens.
groups or special dates
Service supplier portal
Pictures (p. 121)
Depending on your service provider,
Assign individual pictures or photos
you will find direct access to his por-
to your Addressbook entries.
tal on your telephone via menu
Animations (p. 80) items or bookmarks. Please contact
Choose a start-up and closing anima- your service provider for more infor-
tion as well as a personal greeting. mation on these services.
Screensaver (p. 79) Siemens Mobile Portal
Choose an analogue or digital clock,
You will find additional ringtones,
or a personal picture.
logos, animations and screensavers
(Operator) Logo (p. 79) as well as more application, games
Choose an individual picture (to be and services in the Internet at this
displayed in standby mode) address:
www.siemens-mobile.com
Wallpaper (p. 79)
Or you can download them directly
Choose your own permanent back-
via WAP:
ground image.
wap.siemens-mobile.com
Colour scheme (p. 79) You will also find a service for saving
Select a colour scheme for the user data here as well as a list of the coun-
interface. tries in which these services are
Applications (p. 73) available.
Download your own applications
from the Internet.
My menu
Create your own menu with fre-
quently (p. 98) used functions,
phone numbers or WAP pages.
 left page (30) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

30 Default book

Default book
C ¢L¢Select function. Phonebook
The Phonebook is located on the
Show entries SIM card. Only one phone number

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Pref_Book.fm

The entries in the standard directory can be entered per entry. The Phone-
(Addressbook or Phonebook) are book on the SIM card can easily be
shown. transferred into a different
telephone.
Select a name with the
J/ I first letter and/or scroll.
Business card
New entry Create your own business card to
sent to a different GSM-phone. If no
Create new entry. business card has been created yet,
Addressbook (see also p. 31) you will be asked for your input.
Phonebook (see also p. 35) H Move from field to field to
enter your details.
Default book §Save§ Press.
You can set a particulary directory as Additional information
your preferred one to use. The content of the business card corre-
The selected standard book is sponds to international standards (vCard).
opened in standby mode with the Ï Copy numbers from Address-
joystick. book/Phonebook.
Open Phonebook or
Groups
H Addressbook.

Addressbook See p. 34.

In the Addressbook, a lot of data can
be recorded for each entry and addi- <Info numbers>
tional functions such as pictures, See p. 37.
birthdays, chat can be used.
 right page (31) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Addressbook 31

Addressbook
The Addressbook can store up to Possible input fields
1000 entries, each with a variety of
telephone and fax numbers as well as Last name: URL:
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Adressbook.fm

additional address details. These First name: Com. services >>

entries are managed separately from Phone number: Group:
those in the Phonebook in the phone
memory. However, you can exchange Phone no./office: Company:
data between the Addressbook and Phone no./mobile: Address: >>
the Phonebook on the SIM card. Fax: Birthday: >>
Fax 2: Picture:
New entry E-mail address:
The address book is set as standard:
E-mail 2: All fields
H Open Addressbook
(in standby mode)
Additional information
C Display input fields. Group: Allocation to a group
(p. 34).
Select requiredinput
Address: Extension to enter the
I fields.
complete address:
Fill in input fields. The
Street:, Post code:, City:,
J maximum number of
Country:
characters available is
shown at the top of the Com. services
display. Information if the entry is
being used as a chat room
At least one name must
contact (p. 61) or for
be entered. Always enter
Walky talky (p. 107) :
phone number with
prefix. Nickname:, Walky Talky ID:,
Walky Talky type:,
WV user ID:, ICQ number:,
AIM screen name:
 left page (32) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

32 Addressbook

Birthday: After activation, the date

of birth is entered.
Display/find entry
Open Addressbook
Reminder: The telephone H (in standby mode).
reminds you one day
before the birthday at the Select required entry.

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Adressbook.fm

time entered.
I
Picture: Assign a picture to the C Display.
entry. It is displayed if you
are called by the corre- Display options
sponding phone number. §Options§ The options menu only
All fields/Reduced fields ever offers the functions
Display of number of for the currently selected
input fields. input field.
§Save§ Save the entry. Move to ... Allocate current or high-
lighted entries to a group.
Additional information
View Display an allocated pic-
Î Temporary Phonebook.
switch to
ture.
Synchronisation Copy to SIM Copies name and one
The Siemens MPM (Mobile Phone Mana- phone number to the
SIM card (Phonebook).
ger, p. 123) makes it possible to manage
the Addressbook using Windows® PCs. New SMS, Create a message with the
Using Remote syncr. you can synchronise New MMS, selected entry.
your mobile with an organiser stored on the New e-mail
Internet (see also p. 117). Browser Start WAP browser and
visit URL.
Inst. mes- Begin chat p. 61.
sage
Talk to Start Walky Talky session
(p. 108).
(For standard functions see p. 15)
 right page (33) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Addressbook 33

Change entry Address book options

H Open Addressbook Depending on the actual situation,
(in standby mode). different functions will be offered.
These functions can be applied to
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Adressbook.fm

I Select required entry. the entry currently selected as well

as to multiple selected entries:
§Edit§ Press.
§Options§ Open menu.
I Select input field.
Move to ... Allocate current or high-
§Edit§ Open entry. lighted entries to a group.

Make changes. Copy to SIM Copies name and number

J to the SIM card (Phone-
§Save§ Save. book).
Filter Only those entries which
Dialling an entry match the filter criteria are
displayed.
Open Addressbook
H (in standby mode). Import Set up readiness to receive
for a Phonebook entry via
Select a name with the IrDA (p. 89) or SMS (p. 43).
J/
I first letter and/or scroll.
Sort Specify sorting criteria for
The number is dialled. output of the Addressbook
entries.
A
If there are several numbers in the Search Enter search term.
address book entry, these are
offered for selection. (For standard functions see p. 15)

I Select phone number.

A The number is dialled.

 left page (34) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

34 Addressbook

Groups Ringing tone for group

Nine groups are specified in your Assign a ringtone to a group that
phone to enable you to arrange your plays when one of its members calls
Addressbook entries clearly. You can you.

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Adressbook.fm

rename seven groups. C ¢T¢Ringtones
H Open Addressbook ¢Group calls
(in standby mode).
Select group.
<Groups> Select (the number of
I
entries is listed behind the Confirm. If a ringtone has
group name). C already been set, it will be
played. Otherwise, the
I Select group. ringtone list will be dis-
played and you can select
Groups menu one.
§Options§ Open menu. I If necessary, select
Rename Change name of group. a ringtone.
group C Confirm.
Group Assign a symbol to a group.
symbol The symbol must then appear
in the display when one of the
group members calls.

Additional information
No group: Contains all Addressbook
entries that do not belong to a group (name
cannot be changed).
Received: Contains Addressbook entries
received by IrDA (p. 89) or SMS (p. 43)
(name cannot be changed).
 right page (35) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Phonebook 35

Phonebook
Entries in the Phonebook (on the SIM Group:
card) are managed separately from Important phone numbers are com-
those in the Addressbook. You can, bined together in a group (VIP). This
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Phonebook.fm

however, exchange data between is independent of the Addressbook

the Phonebook and the Address- groups.
book.
Location:
New entry Default SIM
Special SIM cards can save phone
If the Phonebook has been selected numbers in a protected area
as standard: (Protected SIM) (PIN2 required).
H Open Addressbook Record number:
(in standby mode).
Each entry is automatically assigned
H Select <New entry>. a record number. You can also dial
using the record number.
C Display input fields.
§Save§ Press to store the new
I Select input field. entry.

Fill in input fields. The Additional information

J maximum number of Î Temporary switch to
characters available is Addressbook.
shown at the top of the §Country§
display. International dialling code ................... p. 24
Phone number: Functions related to Text entry ..........p. 19
Always enter phone number with
prefix. An entry is not saved without
a phone number.
Name:
Enter first and/or last names.
 left page (36) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

36 Phonebook

Call (search for an entry) Phonebook options

H Open Phonebook. The following functions are
Select a name with the available, depending on the current
J/I first letter and/or scroll. situation.

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Phonebook.fm

§Options§ Open menu.
A Number is dialled.
Copy into 9 Copy all highlighted
Call using record no. entries to the Address-
book.
A record number is automatically
assigned to every new entry in Copy all to 9 Copy all entries to the
Phonebook. Addressbook.

Enter record number. Delete all The entire Phonebook

is deleted. PIN-pro-
J
Press. tected
# Import Set up readiness to
A Press. receive for a Phone-
book entry via IrDA
Change entry (p. 89) or SMS (p. 43).

Select entry in (For standard functions see p. 15)

I Phonebook.
§Edit§ Press.

I Select desired input field.

J Make changes.

§Save§ Press.
 right page (37) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Phonebook 37

<Special books> <Service nos.>/<Info numbers>

Open Addressbook There might be phone numbers
saved in your Phonebook that have
H (in standby mode).
been provided by your service pro-
<Special books>
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Phonebook.fm

vider. They may be used to call local

Select.
or national information services or to
use services offered by your service
<Own numbers> provider.
Enter "own" phone numbers in Phone-
book (e.g., fax) for information. These Phone number extensions in the
numbers can be changed, deleted Phonebook
and also sent as an SMS message. Digits may be replaced by a "?" when
phone numbers are entered in the Phone-
<VIP numbers> book/Addressbook:
Press down:
Display the phone numbers saved in #
the VIP group. These wildcards must be replaced with
numbers before dialling (e.g., with the
<SIM phonebook> extension numbers in a phone system).
To make a call, select the phone number
Entries stored in the Phonebook on from the Phonebook/Addressbook.
the SIM card can also be used on
other GSM phones. A Press.
Replace "?" with numbers.
<Protected SIM> b
J
On special SIM cards, phone num- A Number is dialled.
bers can be stored in a protected
location. PIN2 is required for editing.
 left page (38) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

38 Call records

Call records
The phone number of a caller is dis- Up to 500 entries are stored in
played if the records:
• the caller has switched off the Calls missed b
Incognito function and The phone numbers of calls that you

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Records.fm

• the network supports the "Caller have received but not answered are
Identity" function. stored for call back purposes.
Alternatively, a caller’s name is dis- Â Icon for missed call (in
played if it is stored in the Phone- standby mode). Press the
book/Addressbook. display key beneath the
Your phone stores the phone num- symbol to call up the Inbox
bers of calls for convenient redial- (p. 42).
ling. Calls received
C ¢P Accepted calls are listed.
Calls dialled
Select record.
I Access to the last numbers dialled by
C Open call list. you.
Fast access in standby
I Select phone number. A mode.
A Dial phone number. Delete records
The records are deleted.
Or
§View§ Display information on Call list menu
the phone number.
The records menu can be called up if
an entry is highlighted.
§Options§ Open menu.
Copy into 9/ Copy the currently
Copy to SIM selected phone number
into the preferred
directory.
(For standard functions see p. 15)
 right page (39) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)

VAR Language: en; VAR issue date: 040728

Durat/charges 39

Durat/charges
You can display the charges and Account limit
duration during a call. You can set
(PIN2 prompt)
a unit limitation for outgoing calls.
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_TimeCharge.fm

Special SIM cards allow you or the

C ¢P¢Durat/charges service provider to define a credit or
Last call a period after which the phone is
barred for outgoing calls.
All outg. calls
§Edit§ Press.
All incoming
Remain. units J Enter PIN2.
Charge sett.
Account limit
Select. Switch on.
I
Open report or settings. J Enter number of units.
C
§Reset§ Reset the selected report. §OK§ Confirm.
Then confirm the credit or reset the
Charge sett. counter. The status display for pre-
paid cards may vary depending on
C Open menu. the service provider.

Currency Auto display

Edit your currency. Call duration and charges are
automatically displayed.
Personal rate
(PIN 2 prompt)
Enter the currency as well as the
charge per unit and time.
 left page (40) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

40 Camera

Camera
You can view photos/videos the selected resolution. In video
recorded on the integrated camera mode, the recording time already
immediately, used and the maximum recording
• use the photo as a background time still available is shown here.

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Camera.fm

image, logo, a switch on/off
animation or a screensaver.
è Camera
Ù Ú ×
• send the photo/video via MMS or
e-mail. 24

Switch on
C ¢R
Or Premium
D Starts camera in standby Òì Options
mode.
Switch over to single
Photo mode
Ñ
image
Ò and video recording. C Takes a photo.
The current (preview) image is dis- Displays the preview
played. You will see the following in
C image of the next photo.
the first line from left to right: The photo is saved with a name, the
Ù Brightness date and the time. To enter the
Ú Zoom factor. name, see Setup in the options
menu.
Û White balance.
Settings prior to taking a photo:
× Flash connected.
F Setting the brightness.
In the top right-hand corner of the
preview image, the number of pho- I Sets the zoom factor.
tos which can still be taken in the
selected resolution is displayed. This
number varies considerably from
motif to motif (storage space
required). Beneath the preview
image, you will find a reference to
 right page (41) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Camera 41

Image resolution Camera options

A setting can be made for the quality The following functions are available,
of the image regardless of the pre- depending on the current situation.
view image resolution.
§Options§ Open menu.
Premium: 640 × 480 (VGA)
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Camera.fm

Settings • Name for recordings

High: 320 × 240 (QVGA)
• Image resolution.
Medium: 160 × 120 (QQVGA)
Pictures Displays list of photos.
Wallpaper: 132 × 176
The resolution may decrease Other videos Display the video list.
depending on the selected digital Microphone Switches the microphone
zoom. on on or off.
Use flash Choose between:
Video mode Automatic, Off,
The video mode resolution is the same Red eye red.
as the preview image resolution.
Self timer The photo is taken approx.
C Start the video recording. 15 seconds after trigger-
ing. For the last 5 seconds,
C Terminate the video you will hear a signal tone
recording. each second.

A red point appears in the top right White Choose between:

in the display while the video record- balance Automatic, Indoor,
ing is being made. Outdoor
§Play§ Plays the video recording. (For standard functions see p. 15)

Additional information
Flash (Accessories) Insufficient memory available.
If the flash is active, this is shown by Start the memory assistant to
Ê
a symbol in the display. The flash is delete specific data (p. 86).
constantly loaded while connected A mirror can be attached to the rearside of
to the telephone. This reduces the the telephone depending on the telephone
stand-by time. variant. This makes it easier to make self
portraits.
× This symbol appears
when the flash is being
loaded.
Seettings, see options menu.
 left page (42) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

42 Inbox

Inbox
The central input folder offers imme- After a set time span, entries which
diate access to the messages cur- have already been read and opened
rently received. This means that you are only displayed in the message-

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_UnifiedInbox.fm

no longer have to look through all related incoming lists (see Setup in
input folders for the various mes- the options menu).
sage types. The entries are marked
with a symbol to indicate their type Inbox options
and status. You will find a list of the §Options§ Open menu.
symbols on p. 7.
To call up the central input folder, Receive e-mail Select set access and
e.g. if a new SMS has been received: send all e-mails.
Press the display key Setup If entries have been
ç beneath the symbol. read, remove them from
the Inbox:
Or Daily,
E In standby mode: Never,
In the central input folder, you will Immediately
find the following message types: If Daily has been
selected, specify the
SMS, MMS, E-mail time.
System messages:
(For standard functions see p. 15)
Message about MMS, Missed alarm,
Missed appts., Calls missed, WAP push,
Voice message
Data objects:
Ringtones, Pictures and Video, calen-
dar entries, Notes and Business card
When you open an entry,
C the relevant application
also starts.
 right page (43) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

SMS 43

SMS
You can transmit and receive very Confirm. The SMS is trans-
long messages (up to 760 charac-
C mitted to the service cen-
ters) on your phone. They are auto- tre to be sent and saved in
matically composed of several "nor- the Sentbox list.
mal" SMS messages (note higher
Text options
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_SMS.fm

charges).
Additionally you can insert pictures §Options§ Open menu.
and sounds in an SMS. .Save
Save composed text in draft
list.
Write/send Picture& Add pictures, animations
C ¢M¢Create new sound and sounds into message
¢SMS text (see following text).
Enter text. Text Insert text module (p. 22).
J modules
You will find informatio-
nen on writing texts with Format Font size: Small font,
and without T9 in the Medium font, Large font
chapter "Text entry" Underline
(p. 19). Alignment: Default alignm.,
The following is displayed Left, Centre, Right
in the to display line: Text Mark (highlight text with the
entry status, number of joystick)
SMS required, number of Delete text Delete the whole text.
characters still available.
Send Select SMS profile so the
Start sending procedure. with... SMS can be sent.
A
(For standard functions see p. 15)
Ï / J Select phone number
from the Phonebook/
Addressbook or enter it.
§Group§ If necessary, select
a group.
 left page (44) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

44 SMS

Picture&sound For Own animat./Own pictures/

Own sounds:
Send the pictures and tones with
or without accompanying text. The selection is displayed/
played back.
C
Remember that these may be pro-
tected (DRM, p. 13). The selection is added to
the SMS.
C
The text input field is open:
The pictures which have been added

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_SMS.fm

§Options§ Open menu. are displayed, sounds are displayed
in the form of "wildcards".
I Select Picture&sound.
The menu contains: SMS to group
Fix animations You can send an SMS message as
a "circular" to a recipient group.
Fix sounds
§Options§ Open menu.
Own animat.
Send Select.
Own pictures
§Group§ The list of groups is
Own sounds
displayed.
Select area.
I I Select group.
Confirm. The first entry of
C the selected section is Open group and highlight
C all/individual entries.
displayed.
A safety inquiry is made
I Scroll to entry required. C and then sending is
started.
For Fix animations/Fix sounds:
The selection is added to
C the SMS.
 right page (45) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

SMS 45

Read Reply options

p Arrival of a new SMS C Reply immediately.
announced in the display.
Open it with the display Write message Create a new reply
key beneath it Inbox text.
(p. 42).
Edit Edit received SMS or
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_SMS.fm

Reading the SMS.

add new text.
C
Scroll through message
Answer is YES Add Answer is YES to
I line by line.
the SMS.
ç SMS Answer is NO Add Answer is NO to
01.10.2004 19:42 the SMS.
+ 12398765431 Call back, Delay, Add a standard text as
Text of SMS . . . Thanks a reply to the SMS.

Read options
§Options§ Open menu.

Delete ì Options Reply See "Reply options"

above.
Picture&sound Save picture/sound
Reply contained in the SMS.
You can answer the SMS now open
Text zoom Enlarge/reduce text
immediately. The new additional
display.
text is placed above the received
text. Archive Move SMS message
Functions for a direct to archive.
reply.
C (For standard functions see p. 15)
 left page (46) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

46 SMS

Lists SMS archive

All SMS messages are archived in dif-
ferent lists, according to their status.
C ¢M¢SMS archive
The list of SMS messages stored in
(List of message symbols, see p. 8):
the phone is displayed.
Inbox List options
C ¢M¢Inbox¢SMS

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_SMS.fm

Different functions are offered
The list of received SMS messages is depending on the list.
displayed. §Options§ Open menu.

Draft Send Send or forward entry.

C ¢M¢Draft¢SMS Send with... Select an SMS profile for

transmission.
The list of not yet transmitted SMS
messages is displayed. Archive Move SMS message to
archive.
Unsent (For standard functions see p. 15)
C ¢M¢Unsent¢SMS
The list of concatenated SMS mes-
sages not yet completely sent is dis-
played. Transmission can be
restarted.

Sent
C ¢M¢Sent¢SMS
The list of sent SMS messages is dis-
played.
 right page (47) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

SMS 47

Setting Message • Manual: Inquiry for all mes-

type sages.
SMS signature • Standard text: Normal SMS
message.
C ¢ M¢Message setup • Fax: Transmission via SMS.
¢SMS¢SMS signature • E-mail: Transmission via
You can enter a “signature” with a SMS.
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_SMS.fm

maximum of 16 characters. This sig- • New: You may need to

obtain the required code
nature will then be attached to each
number from your service
SMS except §Reply§ and when changes provider.
are made to an existing SMS.
Validity Period in which the service
SMS profiles period centre is to try to deliver the
message:
C ¢M¢Message setup Manual, 1 hour, 3 hours,
¢SMS¢SMS profiles 6 hours, 1 day, 1 week,
Up to 5 SMS profiles can be set. The Maximum*
transmission characteristics of an * Maximum period that the
SMS are defined in these. The pre- service provider permits.
setting depends on the SIM card Status Receive confirmation of suc-
inserted. report cessful/failed transimssion of a
Activate profile
= message. This service may be
subject to a charge.
I Select profile. Direct If activated, the reply to your
reply = SMS message is handled via
Activate.
your service centre (for infor-
C
mation, please contact your
Set profile
service provider).
I Select profile. SMS via Sent SMS automatically via
GPRS GPRS (p. 89).
§Edit§ Open to edit the profile. =
Service Enter the phone numbers for Save aft. Sent SMS messages are
centre the service centre as provided send saved in the Sentbox list.
by the service provider.
Recipient Enter a standard recipient for
the profile.
 left page (48) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

48 SMS

More information on SMS Downloading ringtones and

logos
SMS status report You can receive links for download-
If the message cannot be transmit- ing ringtones, logos, screensavers,
ted to the service centre you are animations and information about
offered the chance to repeat the applications with an SMS. Please
transmission. If this also fails, con- highlight this link and, by pressing

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_SMS.fm

tact your service provider. The Mes- the Call key A, start the download.
sage sent! message only indicates Please check that the dial-in access
transmission to the service centre. (p. 90) is configured.
This will then attempt to relay the Remember that these may be pro-
message within a certain period. tected (DRM, p. 13).
See also Validity period (p. 47).
ã SIM memory full
Phone number in SMS If the message icon flashes the
Phone numbers displayed in the SIM memory is full. No more SMS
§highlighted§ text can be dialled (A) messages can be received. Messages
or saved in the Phonebook/ must be deleted or archived.
Addressbook.
 right page (49) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

MMS 49

MMS
The Multimedia Messaging Service Write texts with the help of T9
enables you to send texts, pictures/ (p. 19).
videos and sounds in a combined Pictures and videos can be recorded
message to another mobile phone or with the integrated camera and/or
to an e-mail address. All elements of loaded from My stuff (p. 121).
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_MMS.fm

an MMS message are merged to

form a "slide show". You can record Sounds with the
sound recorder and/or load them
Depending on your phone's settings, from My stuff (p. 121).
you will receive either the complete
message automatically or notifica- First select an object for processing
tion that an MMS has been saved in to be added to the first page of the
the network, giving sender and size MMS:
details. You may then download it to
your phone to read it. Pictures/videos
Ask your service provider whether Limits on picture size can be set in
this service is available. You may the user settings.
need to register for this service sepa- <Picture> Select.
rately. Display picture/video
C functions:
Create Insert picture
C ¢M¢Create new¢MMS Open list to select a picture.
An MMS consists of the address Insert video
header and the content. Open list to select a video.
An MMS may consists of a series of
Camera
pages. Each page may contain a text,
a picture/video and a sound. Activate the camera to take a photo
Remember that pictures and sounds or record a video for the MMS
may be protected (DRM, p. 13). (p. 40).
R Also possible.
 left page (50) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

50 MMS

Open Text
Display picture. <Text> Select and write the text.
Delete The text functions are dis-
Delete inserted picture/video.
C played (see also p. 19):
Save Insert...
Save picture/video for use later on. Choose any of the following for

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_MMS.fm

insertion: Text modules, Bookmark,
Msg. details
Insert from d
Display properties, incl. any user
right restrictions (p. 13). Delete text
Delete text on current page.
Sounds Save
<Sound> Select. Save text on the page as text mod-
ule.
C Display sound functions:
Text input
Insert sound T9 settings:
Open list to select a tone. T9 preferred, Input language
Record Mark
Activate tone recording in order to Text processing together with
record tones (p. 113). Copy and Insert.
m Also possible.
Open
Play back the tone.
Delete
Delete inserted tone.
Save
Save tone for use later on.
Msg. details
Display properties, incl. any user
right restrictions (p. 13).
 right page (51) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

MMS 51

Generation options Colours Select the colours for:

§Options§ Open menu. • Message
• Page
law
Send MMS Send MMS. • Bitmap
Play • Text backg.
Play entire MMS on the
display. • Text colour
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_MMS.fm

Picture... See above p. 49. (For standard functions see p. 15)

Sound... See above p. 50.

Templates
Text... See above p. 50.
Page Add page: Insert new page
C ¢M¢MMS templates
behind current one. MMS templates are saved MMS with
not address. They can be sent as new
Delete page: Delete cur-
rent page. MMS or used as part of a new MMS.
A maximum of 10 templates can be
Page list: Display available saved.
pages.
Timing: Set the temporal Create templates by writing a new
sequence of the MMS pres- MMS or using an MMS which you
entation: have already received.
• Page duration: §Options§ Open menu and select
Automatic or Manual Save as templ.
• Show page:
Only if Manual is set in
front of it. Enter the
lifespan of a page.
Msg. details Enter sending parameters
(see next chapter).
Save as After creating MMS, save it
templ. as a template. See also
below:
Layout Select one of four possible
layouts:
Text above, beneath,
beside (on left or right) of
picture.
 left page (52) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

52 MMS

Sending an MMS Expanded address fields

The page(s) of the new MMS is (are) I Scroll downwards.

already created and the MMS is dis-
played. More: Provide additional
address fields.
A Open address entry. Cc: Address(es) of copy
recipient(s).

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_MMS.fm

ç MMS Bcc: Address(es) of copy
Subject: recipient(s) who are not
Greetings from London visible to the other recipi-
Send to: ents.
+1234567654321 | Attachments:
Size: Insert attachments.
85 KB
Date: Creation date.
Þ ß á
Use delivery time:
] ì Options Usee specified send time.
If §Yes§:
Subject: Enter a brief description. Delivery date:
Send to: Enter one or more phone Send date.
number(s)/e-mail Delivery time:
address(es). Send time.
Ï Insert from
Addressbook. Icons for status information
Size: Display the size of the cur- Þ Priority
rent MMS.
ß Send report.
A Start sending procedure.
á Contains DRM (p. 13).
The MMS is sent after con-
C firmation.
 right page (53) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

MMS 53

Sending options Receiving an MMS

§Options§ Open menu. Depending on the setting, an MMS
can (p. 55) be received in two ways:
Send MMS Send MMS.
Play Play entire MMS on the Complete transmission
display. The complete MMS is sent to your
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_MMS.fm

Edit Object selection to change telephone. This can take quite long if
an object. the MMS is large. Thus, the request
to switch to GPRS is displayed before
Add Add recipient from the cur- reception, if need be.
recipient rent address directory.
Delete Delete individual recipient. ç Shown in the display.
recip.
Start reception. The MMS
Add Add attachment: < is sent.
attachm. • File
• Business card Preliminary notification
• Appointment
You are notified that an MMS is
Page list Display MMS pages for awaiting reception.
viewing and/or changing.
Shown in the display.
Save as After creating MMS, save it w
templ. as a template. Read the notification.
(For standard functions see p. 15)
< Display the size of the
MMS in KB.
§Receive§ The complete MMS is
sent.
§OK§ Display in Inbox.
 left page (54) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

54 MMS

Reading an MMS Lists

An MMS has been fully received. All MMS are saved in four different
lists (list of message icons, see p. 8):
I Select the MMS.
Inbox
Start automatic playing of
C the MMS. C ¢M¢Inbox¢MMS

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_MMS.fm

Key functions for playback: The list of MMS messages and notifi-
To the next page. cations received is displayed. To
receive an MMS subsequently, open
E
D Press briefly once to return notification and press §Receive§.
to the start of the current
page; press briefly twice to Draft
return to the start of the
previous page. C ¢M¢Draft¢MMS
The list of stored drafts is displayed.
I Set volume.
Unsent
C/ B Terminate.
C ¢M¢Unsent¢MMS
When the MMS is complete, the
The list of the MMS messages not yet
message details are displayed.
completely transmitted is displayed.
Subject: Description of the MMS.
From: Information about the Sent
sender. C ¢M¢Sent¢MMS
Size: Size of the MMS in KB. The list of sent MMS messages is dis-
Expanded address fields played.
I Scroll downwards.

More: Additional input fields.

Cc: Copy recipient.
Attachments:
Save attachments.
Date: Reception date.
Symbols for status information
(see p. 52)
 right page (55) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

MMS 55

List options Setting

Different functions are offered
depending on the list/situation.
C ¢M¢Message setup¢MMS
¢Select function.
§Options§ Open menu.
Play
MMS profile:
Play MMS on the dis-
play. Six MMS profiles can be set (5 in the
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_MMS.fm

telephone memory, one on the

Edit Display MMS for SIM card). The send properties can
processing.
be specified in them. If the setting
View Display MMS for view- has not yet been set, you will receive
ing only (write-pro- the necessary data from the service
tected). provider or via the "Setting Configu-
Send MMS rator" at (p. 125):
Send MMS.
www.siemens-mobile.com/
Reply MMS Reply to MMS mobilescustomercare
immediately.
Activate profile
Forward MMS Enter recipient(s) for
forwarding. I Select profile.
Msg. details Display message §Options§ Open menu and select
parameters. Activate.
Receiv.all MMS Send all new MMS Set profile
immediately.
Select profile.
(For standard functions see p. 15)
I
§Options§ Open menu and select
Change sett.
 left page (56) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

56 MMS

User settings Retrieval: Receive complete MMS or

Set the MMS dispatch to suit your only notification of arrival.
requirements: Immediate
Receive complete MMS
Delivery Request delivery confirma- immediately.
report: tion for sent messages.
Auto.homenet
Read reply: Request confirmation that

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_MMS.fm

Receive complete MMS
the MMS has been read. immediately in home
Default Send priority: network
priority: Manual
Normal, High, Low
Only receive the
Validity: Select the period in which notification.
the service centre is to try
to deliver the message: Spam filter: Settings for receipt of pro-
Manual, 1 hour, motional MMS.
3 hours, 6 hours, Size indica- Set max. message size and
1 day, 1 week, Maximum* tion: = message handling.
* Maximum period that the
service provider permits.
Earliest Transmission from the
deliv. time: service centre to the
recipient:
Immediate, Tomorrow
Default Length of display for an
duration: MMS page (standard
requirement).
 right page (57) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

E-mail 57

E-mail
Your phone has an e-mail program Options
(client). You can use it to create and
Different functions are offered
receive e-mails.
depending on the position of the
cursor.
Write
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Email.fm

§Options§ Open menu.

C ¢M¢Create new¢E-mail Send e-mail Send e-mail.
Enter the address data for the e-mail:
Send later Transfer e-mail into the
Send to: Enter one or more Unsent list.
E-mail address(es).
Ï Insert them from Save Save e-mail in the
the Addressbook/ Draft list.
Phonebook. Add recipient Add recipient from the
Subject: Enter e-mail heading current address direc-
(up to 255 characters). tory.
Content Enter text. Delete line Delete current line.
To send: Insert... Text modules
§Options§ Open menu. Bookmark
Send e-mail Ï Insert them from
Select. the Addressbook/
Phonebook.
Or
Add attachm. My stuff Open to make
All fields Opens additional input
a selection. Remember
fields. that pictures and
Cc: Address(es) of copy recip- sounds may be pro-
ient(s). tected (DRM, p. 13).
Bcc: Address(es) of copy Delete text Delete the whole text.
recipient(s) who are not
Text input • T9 preferred
visible to the other recipi-
ents. • Input language

Attachments:
Add attachments such as
images and sounds.
 left page (58) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

58 E-mail

Receive/read Attachments
C ¢M¢Inbox Contains the e-mail attachments,
¢Select function. these can be saved in My stuff
(p. 121).
Before an e-mail can be read, it must
be retrieved from the server. You §Options§ Open menu and select
have two options: Save attach.

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Email.fm

Retr. e-mail Lists
Only the message header in Inbox All e-mails are saved in different lists
(p. 42) is sent. You can then decide if depending on their status (list of
you also want to receive the con- message icons, see p. 8):
tents:
§Options§ Open menu and select Inbox
Retrieve body. C ¢M¢Inbox¢E-mail
or want to delete the e-mail on the The list of received e-mails is dis-
server: played.
§Options§ Open menu and select
Del. on server. Draft
Send/rec. mail C ¢M¢Draft¢E-mail
The list of e-mails not yet transmit-
The set access is selected and all
ted is displayed.
e-mails transferred into Inbox (p. 42).
At the same time, completed e-mails
are transferred from the Unsent list.
 right page (59) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

E-mail 59

Unsent Setting
C ¢M¢Unsent¢E-mail C ¢M¢Message setup
The list of e-mails not yet transmit- ¢E-mail
ted is displayed. Before using this service you must
set the server access and your e-mail
Sent parameters. You will receive the
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Email.fm

C ¢M¢Sent¢E-mail necessary data from the service pro-

vider or via the "Setting Configura-
The list of transmitted e-mails is
tor" (p. 125) at:
displayed.
www.siemens-mobile.com/
mobilescustomercare
List options
Different functions are offered Accounts
depending on the list.
Select account.
§Options§ Open menu. I
Retr. e-mail Open
Only transfer the message
C
header into Inbox (p. 42).
Activating access
Retrieve Fetch the contents from the
body server if only the message I Select access.
header was received.
C Activates access.
Del. on Delete message on the
server server. Set access
(For standard functions see p. 15) I Select access or <Empty>.

§Edit§ Start the processing and

fill in the data fields as
specified by the service
provider.
 left page (60) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

60 E-mail

Account sett. SMTP port: * (Default: 25)

Provider: Select provider. SMTP Authentication: Yes/No
authentic.:
User name: Your name.
SMTP A user password will be
E-mail Your e-mail address, e.g.: password: required if
address:* name@domain.abc "Authentication" is set to

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Email.fm

Yes.
Reply Additional e-mail address
address: for replies. *Your service provider will supply you with
this information.
User ID: * Your user ID.
§Save§ Save settings.
Password: * Your password.
Downl. only Set maximum size for General sett.
e-mails incoming e-mails. Enter an e-mail address to which a
smaller than
<10> KB Bcc (blind carbon copy) is always
sent.
Leave copy E-mails remain on the
on serv.: server after they have
been retrieved or are
deleted.
Download Subject only, whole
mode: e-mail, prompt.
Server type: Select POP3 or IMAP4.
POP3 Enter Internet address if
server:* the server type is POP3
and SMTP.
POP3 port: * (Default: 110)
IMAP4 Enter Internet address if
server: * the server type is IMAP4
and SMTP.
IMAP4 port: * (Default: 25)
SMTP Enter Internet address.
server:*
 right page (61) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Inst. message 61

Inst. message b Rapid access ...

With this function you can transfer Select the access (p. 66)
text, audio clips, pictures and files
straight to and from one or more ter- C ¢M¢Inst. message¢Login
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Instantmsg.fm

minals (mobile phone, PC). This The current contact list or the list is
function is not offered by all service displayed (if necessary, set access
providers. Please ask your service first, p. 66).
provider about this.
Your dialogue partners are entered Specify your own status (p. 67)
in contact lists. When a connection §Options§ Open menu.
has been established, these lists
show who is available, whether they My settings
want to be disturbed and what mood Select and make entries.
they are in. B Return to contact list.
GPRS must be switched on.
Enter new contact
C ¢M¢Inst. Message §Options§ Open menu.
Manage Press, then:
Start menu Add contact
Login Select the access via select and enter the user
which the dialogue runs ID at least.
or B Return to contact list.
Account: select (p. 66).
Inst. Message with new contact
Msg. history
Read the messages from (p. 65)
the last meeting.
I Select the contact.
Setup Settings for your repre-
sentation, the applica- C Start Inst. Message.
tions and servers.
C Open editor.
Quit End application.
J Write text.

C Send text …
... etc.
 left page (62) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

62 Inst. message

Login Managing the contacts

C ¢M¢Inst. message¢Login I Select a contact.
Select the last access to be used §Options§ Open menu.
(see also Automatic login: p. 67).

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Instantmsg.fm

Manage Select.

Contact lists Contacts

Different functions are offered
When the connection has been
depending on the selection:
established, the contact list or the
list of the contact lists is shown for Add contact User ID:
selection.
Enter a non-ambiguous
In the contact list, you will find a list user (login) name.
of the most recently used contacts. Nickname:
The first time you log in, an “empty”
Enter your own nick-
contact list will be generated by the name for the contact.
server if necessary.
Friend:
Displays in the list:
The contact receives the
-Conversation status Friend: and
Displays of the online contacts for access to personal infor-
mation (p. 67).
the messages are available.
Search Search for contact.
-Online contact
Online contacts with whom no con-
Delete contact Delete contact from the
versation is being held at the
list.
moment.
Block contact No more messages are
-Group b received from the con-
Groups for Inst. Message with sev- tact and the contact
eral contacts. receives no status infor-
mation from you. This
-Offline function works for all
Contacts who are not online at your lists.
present.
 right page (63) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Inst. message 63

Managing the groups b Create group Group ID:

Select one of the groups Enter a non-ambiguous
I you set up yourself. group name.
§Options§ Open menu. Name:
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Instantmsg.fm

Manage Select. Name of group.

Manage group Topic:
Topic of group.
Different functions are offered
depending on the selection: Searchable:
Other people can look for
Add member Add a new group member, the group.
see also Add contact Welcome note:
(p. 62).
Enter welcome text.
Search Search for group member.
memb. Delete group Delete group.
Invite Invitation to the contacts
in your own group to Inst.
Message.
Delete Delete contact from the
member group member list.
Add group Add new group.
Search group Search for group on the
server (no longer in the
"administered groups"
list).
 left page (64) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

64 Inst. message

Creating a new contact list Contact list options

The current contact list is displayed. §Options§ Open menu.
§Options§ Open menu. Details = Additional information
Contact lists about the contact or the

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Instantmsg.fm

Available contact lists are group.
displayed. My settings Information on your cur-
§Options§ Open menu. rent personal status
(p. 67).
Create Select.
Contact list ID: Manage Functions for managing
Give the contact list its a contact or a group.
own, specific name. Contact lists Display contact lists for
Name: Allocate self-explanatory selection.
names. Block list Display all blocked con-
C Confirm. tacts. Can be unblocked.
Appl. settings Set the application
(p. 67).
Suspend Terminate the applica-
tion, the server remains
connected.
Logout Log off from the server
and return to start menu.
Help Display help text.
 right page (65) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Inst. message 65

Start chat Options (individual contact)

A contact list must be displayed. §Options§ Open menu.
Select a contact or Send sound Select and send a melody/
I a group. tone from the list (DRM
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Instantmsg.fm

=
Start communication with p. 13).
C the contact. Send Select and send a picture
The page is displayed. picture = from the list (DRM p. 13).
During Inst. Message with Send any Send any file.
a group, the name of the =
sender is placed in front
Details Information about the con-
of each contribution.
tact (if this is authorised by
him).
C Open editor.
Clear all Delete all texts in the cur-
J Write text rent Inst. Message.
Send text. The text Block No more messages are
C appears in the chat soon contact received from the contact
afterwards. and the contact receives
no status information from
Naturally, you can also receive mes- you.
sages from contacts whom you do This function works for all
not know. This will be pointed out to your lists.
you in the display, and you can
either switch to Inst. Message or
ignore/block the contact.
 left page (66) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

66 Inst. message

Options (group contact) b Setting

§Options§ Open menu.
C ¢M¢Inst. message
Leave group Exit group. ¢Setup
¢Select function.
Details

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Instantmsg.fm

Information about the
group: Account
Group ID:, Name:, Topic:,
The list of available accesses is
Owner:
displayed.
Clear all Delete all texts in the cur- Select an access to estab-
rent Inst. Message. I/C lish a connection.
Or
Receiving objects b <New entry>/Account sett. =
You will be informed in the display if Set up an access or
sounds or pictures are sent to you change the settings as
during a dialogue. specified by the service
§Receive§ Accept object. provider. Depending on
the service provider, the
or settings may not be
§Reject§ Reject object. changeable.
Name:
Msg. history Name of the access.
URL: Enter URL, e.g.
C ¢M¢Inst. message www.abc.com
¢Msg. history
User ID: Enter a non-ambiguous
The messages from the last meeting user (login) name.
are displayed. You can read and
delete the contributions. Password: Enter password (shown
as a series of asterisks).
Requirement: The server must be
disconnected, see Suspend (p. 64)
and Automatic login: (p. 67).
 right page (67) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Inst. message 67

My settings Appl. settings

Information on your current per- Settings for the application used:
sonal status:
Automatic Auto-reconnect to the
Alias: Your own alias by which login: last access to be used.
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Instantmsg.fm

you can be found on the Timeout:

server. Time without action after
which the application is
AIM screen Name to be displayed in terminated. However, the
name: the group. server remains con-
nected.
Mood: Information about your own
mood, e.g. Message info:/ Signal the receipt of mes-
Online info: sages: Yes/No
Happy, Sad, Sleepy, etc.
Signal given as:
Status text: Random text information, • Sound
e.g. “Am at home”. • Silent alert
Availability: Availability: • Pop-up
Popup windows
Available, Not available, authorised: Yes/No
Discreet
Mobile: Enter the phone number
with internal extension
code.

§Options§ For each setting, specify

who is allowed to view
your personal informa-
tion:
Public
All contacts.
Private
Contacts designated as
Friend: (p. 62).
Hidden
Nobody.
 left page (68) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

68 Voice message/mailbox

Voice message/mailbox
C ¢M¢Setup¢Voice message Save call divert number
Most service providers provide Calls are diverted to this phone
a mailbox in which a caller can leave number.
a voice mail for you if

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Mailbox.fm

• if your phone is switched off or
C ¢T¢Phone setup
¢Divert
not ready to receive, ¢e. g. Unanswered¢Set
• if you do not want to answer,
Enter phone number.
• if you are making a phone call J
(and if Call waiting (p. 84) is not §OK§ Registration with the net-
activated). work is confirmed a few
If the voice mail service is not part of seconds later.
your service provider's standard
package, you will need to register for Listening to message b
it, and possibly make the settings A new voice message can be
manually. The following sequence announced as follows, depending on
may vary from service provider to the service provider:
service provider.
À Icon plus beep.
Setup b Or
The service provider supplies you ç Notification via SMS.
with two phone numbers: Or
Save mailbox number You receive a call with an automatic
You call this phone number to listen announcement.
to the voice mails left for you. Call your mailbox and play the mes-
sage(s) back.
C ¢M¢Setup
¢Voice message Press and hold (if neces-
1 sary enter mailbox
Ï/ J Select number from number once only). Con-
Phonebook/Addressbook
firm with §OK§ and §Mailbox§
or enter/change it.
depending on your serv-
§OK§ Confirm. ice provider.
 right page (69) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)

VAR Language: en; VAR issue date: 040728

CB services 69

CB services
C ¢M¢Setup Topic Select
¢CB services §Options§ Open list menu.
Some service providers offer infor- If a topic is selected in the list you
mation services (info channels, Cell can view it, activate/ deactivate it,
Broadcast). If reception is activated, edit it or delete it.
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_CB.fm

your Topic list will supply you with

messages on the activated topics. CB languages
CB messages are displayed in Receive Cell Broadcast messages in
standby mode, longer messages are only one specific language or in all
scrolled automatically. languages.

Receive CB Displays
You can activate and deactivate the Ö,Õ Topic activated/deactivated.
CB service. If the CB service is acti-
New messages received on
vated, standby time for the phone p the topic.
will be reduced.
Messages already read.
Topic list
q
You can add any topics to this per-
sonal list from the topic index. You
can preset 10 entries with their
channel numbers (ID) and, if applica-
ble, with their names.
New topic Select.
• If no topic index is available, enter
a topic with its channel number
and confirm with §OK§.
• If the topic index has already been
transmitted, select a topic and
activate it with §Options§.
 left page (70) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

70 Surf & fun

Surf & fun

Get the latest information from the Browser menu
Internet that is specifically adapted
§Options§ Open menu.
to the display options of your phone.
In addition, you can download Homepage Call up the pre-set

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Internet.fm

games and applications to your homepage for the current
phone. Internet access may require profile.
registration with the service pro-
Bookmarks • List bookmarks
vider.
Display list of book-
marks stored in the
Access to the service phone.
• Bookmark site
provider The current page is
Direct call-up of the browser with saved as a bookmark.
the URL from your service provider. Go to... Enter URL for direct dial
to an Internet address,
Internet e.g. wap.siemens-
mobile.com
C ¢O¢Internet Reload Reload current page.
The browser is activated with the
Show URL Display the URL of the
pre-set option as soon as you call up
page currently loaded for
the function (Browser settings, sending via SMS/MMS/
S. 71; may be specified/pre-assigned e-mail.
by service provider).
History Display last Internet sites
to be visited.
Disconnect Disconnect the Internet.
File Save object on the current
page or save the com-
plete page; display saved
pages.
Setup Set or reset browser
(p. 71).
Exit browser Close the browser.
 right page (71) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Surf & fun 71

End connection Browser settings

Press and hold to clear C ¢O¢Internet
down the connection and
B
close the browser. §Options§ Open menu.

Navigation in the browser Setup Select.

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Internet.fm

C • Select a link. Browser Set start option as well as

• Settings, status on/off. handling of pictures and
sounds plus send options.
B • Press briefly: back a page.
Profiles The list of profiles is dis-
• One input field/link forward/back. played for activation/set-
I • Scroll one line. ting. For more information,
contact your service
provider.
Display symbols in the browser
Protocol Set protocol parameters,
(selection) parameters push messages and abort
time as well as handling of
² Connect ´ No network cookies.

± Network ³ GPRS online Security Set encryption.

Context Reset session; delete
cache, history and cookies.
Enter special characters
*,0 Select important special
Profiles
characters.
Preparation of the phone for Internet
Your Internet browser is licensed by: access depends on the service pro-
vider concerned:
Profile pre-set
In most cases, access profiles have
already been created for one or more
service provider(s).
I Select profile.

C Activate profile.
 left page (72) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

72 Surf & fun

Set profile manually Save

You will receive the necessary data Bookmark site
from the service provider or via the The current page is saved
"Setting Configurator" (p. 125) at: in the phone as a
www.siemens-mobile.com/ bookmark.
mobilescustomercare

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Internet.fm

§Options§ Open menu. Bookmark options
Edit Start processing. For the §Options§ Open menu.
Internet-specific settings
below, please contact your Here you will find functions for
service provider. changing and managing bookmarks
and their folders. This includes edit-
Delete Delete selected profile.
ing individual entries with the corre-
sponding URLs as well as deleting
Bookmarks and moving them to other folders.

C ¢O¢Bookmarks Emoty
Display URL/call up page If your phone is equipped with an
Emoty CLIPit™ cover, you can
List bookmarks
transmit emotions. Various figures
Display list of bookmarks
are animated with the integrated
stored in the phone.
pressure, touch, and vibration
I Select bookmark. sensors. The animations can be sent
as MMS. You will find extensive
C Call up URL. information in the Emoty userguide.
 right page (73) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Surf & fun 73

Surf & fun Games and Applications Download new

Games and applications are offered Select a service provider
on the Internet. Once downloaded,
I or URL.
these are available to you via the
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Games&Apps.fm

Start WAP browser and

telephone. Most applications include C visit URL.
instructions. Some applications and
Only description file
games are already pre-installed on
your telephone. You will find these Ì The description file is
listed here: loaded for information
www.siemens-mobile.com/cx70 purposes only. The appli-
cation/game itself must
Requirements be loaded separately.
WAP profile (p. 71) and the access or complete download
(p. 90) must be configured. Ë The application/game is
completely loaded.
Download
Select the correct access depending Apply
on whether you are loading games Remember that applications/games
or applications: may be protected (DRM, p. 13).
C ¢O¢Games Í The executable applica-
or tion is saved on the tele-
phone and can be started
C ¢O¢Applications immediately .
In addition to URLs and service pro-
viders for the download, any availa-
ble applications/games and folders
Downl. assist.
will be displayed. C ¢O¢Downl. assist.
You will not be left on your own dur-
ing the download!
 left page (74) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

74 Surf & fun

Options Additional information

Processing and administering your You can use WAP to download applications (e.g.
applications and folders: ringtones, games, images, animations) from the
Internet. Downloading or running applications will
not affect or change the software already

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Games&Apps.fm

Move Move applications between
installed on your Java™-enabled mobile phone.
folders. Siemens excludes all warranty and liability claims
New folder Create and name new in respect of or in connection with any applica-
folder. tions subsequently installed by the customer and
any software not included in the original delivery
Reinstall Reinstall an application package. This also applies to functions enabled
(update). subsequently at the customer's instigation. The
purchaser bears sole risk for the loss of, damage
Security Select a safety level. to, and any defects arising in, this device or the
applications and for any direct damage or conse-
Reinstall Repeat after transmission quential damage of whatever nature resulting
error. from the use of this application.
For technical reasons, such applications and sub-
Attributes Show details of the applica- sequent enabling of certain functions are lost in
tion/folder (name, version, the event of the device being replaced/re-sup-
size, path, producer, date). plied and may be lost if it is repaired.
In such cases, the buyer is required to download
HTTP Display profile list for or release the application again. Please ensure
profile activation/setting that your phone has Digital Rights Management
(DRM) so that individual applications downloaded
(For standard functions see p. 15) via WAP are protected from unauthorised repro-
duction. These applications are then exclusively
intended for your phone and cannot be trans-
ferred from this even to create a backup.
Siemens does not warranty, guarantee or accept
any liability for the customer's ability to download
or enable applications again or to do so free of
charge. If technically possible, back up your
applications to a Windows® PC using the
"Mobile Phone Manager", p. 123,
www.siemens-mobile.com
 right page (75) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Setup 75

Setup
Profiles Profile settings
Edit a default profile or create a new
C ¢T¢Profiles personal profile:
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Profiles.fm

Several settings can be stored in

a phone profile in order, for exam- I Select profile.
ple, to adapt the phone to the sur-
rounding level of noise. §Options§ Open menu.
• Five standard profiles are provided Change sett.
with default settings. They can be Select.
changed however: The list of available functions is dis-
Normal environment played.
Quiet environment When you have finished setting
a function, you return to the profile
Noisy environment menu where you can change
Car Kit a further setting.
Headset Additional information
• You can set two personal profiles • Calling up the list in standby mode:
(<Name>). Profile list is displayed.
G
• The special profile Aircraft mode is • The active profile is marked with ·.
fixed and cannot be changed.

Switching on a profile
Select default profile or
I personal profile.
C Switch on profile.
 left page (76) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

76 Setup

Profile-Optionen Aircraft mode

§Options§ Open menu. All alarms (appointments, alarm
clock) are deactivated. This profile
Activate Activate selected profile. cannot be modified.
Change sett. Change profile settings. Switch on

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Profiles.fm

Copy from Copy settings from H Scroll to Aircraft mode.
another profile.
C Confirm selection.
Rename Change personal profile
(except default profiles). C Confirm safety inquiry
again in order to activate
the profile. The phone
Car Kit switches itself off auto-
If an original Siemens Car Kit is used, matically.
the profile is switched on automati- Normal mode
cally as soon as the phone is inserted
When you switch on your phone
into the cradle (see also accessories,
again, the previously set profile will
p. 133).
be reactivated automatically.
Headset
The profile is only switched on auto-
matically if an original Siemens
headset is used (see also accessories,
p. 133).
 right page (77) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Setup 77

Setup Themes Activate new topic

C ¢T¢Themes I Select topic.
Load a completely new user inter-
Display topic preview.
face in your telephone. With the C
press of a key, various functions are Activate new topic.
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Themes.fm

re-organised based on a topic, e.g.

C
• switch on/off animation,
• background image,
• screensaver,
• switch on/off melody,
• additional animations.
Topic files are compressed to save
memory space. After a download
(p. 73) or a call from My stuff, these
are automatically unzipped when
activated.
Additional information
It is possible that the existing settings could
be overwritten.
 left page (78) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)
VAR Language: en; VAR issue date: 040728

78 Setup

Setup Dynamic light §Change§ Display the possible

rhythms.
C ¢T¢Dynamic light Select them from several
¢Select function. I flash rhythms.

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_DynamicLight.fm

The LEDs beneath the top of the
phone are used to optically signal C Allocate selection.
various functions.
Play demo
Show effects All flash rhythms are displayed in
Switch on function. sequence.
§Cancel§ Terminate.
Select
You can set the optical signals for the
following functions:
Standby
Net search
d Calls
Group calls
Other calls
During a call
Incoming msgs
Appointments
CarKit conn.
Low battery
During on/off
Soundplayer
 right page (79) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)

VAR Language: en; VAR issue date: 040728

Setup 79

Setup Display Wallpaper

C ¢T¢Display Set wallpaper graphic for display.
¢Select function.
Logo
Language Choose graphic to be displayed
instead of the provider logo.
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Display.fm

Set the language of the display text.

When "automatic" is set, the lan-
guage of your home service provider Colour skin
is used. Select colour scheme, incl. back-
If a language that you do not under- ground image for the entire user
stand happens to be set, the phone interface
can be reset to the language of your
home service provider with the fol- Screensaver
lowing input (in standby mode): The screensaver shows a picture in
the display when a period set by you
* #0000# A has elapsed. An incoming call and
Text input pressing any key will end the func-
tion except if the safety function is
T9 preferred activated.
Activate/deactivate intelligent text Preview
entry.
Display the screensaver.
Input language
Style
Select language for text entry. Lan-
guages with T9 support are marked Select Analogue clock, Digital clock,
with the T9 symbol. Bitmap, Energy saving
Bitmap
Select image in the My stuff.
 left page (80) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)
VAR Language: en; VAR issue date: 040728

80 Setup

Timeout Own greeting

Set period after which the screen- Enter greeting to be displayed
saver starts. instead of animation when phone is
Security switched on.
To terminate the screensaver, the
telephone code is requested.
Big letters

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Display.fm

You can choose between two font
Auto key lock
sizes for the display.
Automatic keypad locking if no key
has been pressed for one minute in Illumination
standby mode.
Set display light brighter/darker. The
Unlocking: darker the setting the longer the
standby time.
# Press and hold.
Press the joystick repeat-
Note
I edly at the top/bottom to
adjust up or down.
The screensaver Digital clock reduces the
phones standby time.

Start up anim.
Select animation to be shown when
phone is switched on.

Shutdn anim.
Select animation to be shown when
phone is switched off.
 right page (81) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Setup 81

Setup Ringtones Volume

C ¢T¢Ringtones Set different volumes for types of
¢Select function. call/functions.
Set the tones on the telephone to I Select
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Ringtones.fm

suit your requirements. Incoming call

Walky Talky
Ringer setting
Messages
On/off Activate/deactivate all
tones. CB services
Beep Reduce ringtone to Alarm clock
a short signal (beep). Organiser
System
Silent alert
The ringtone is sounded
To avoid the disturbance caused by C again.
a ringing phone, you can activate the
silent alert function as an alternative. I Set volume.
The silent alert can also be activated
in addition to the ringtone (e.g. in C Confirm setting.
noisy environments). This function is
deactivated when the battery is being Additional information
loaded and accessories are connected Please make sure you have accepted the
(except the headset). call before holding the phone to your ear.
Select one of several dif- This will avoid damage to your hearing from
loud ringtones.
I ferent silent alerts.
 left page (82) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

82 Setup

Allocating a ringtone More melodies

A ringtone which has already been Allocate further ringtones for:
selected will be played or the list of Messages
possible ringtones will be displayed Alarm clock
for selection.

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Ringtones.fm

Organiser
d Calls
Startup melody
Allocate a single ringtone to all
phone numbers in the Addressbook. Shutdown mel.
Group calls or record new ones with:
Allocate a different ringtone to each Sound recorder (p. 113)
group.
Other calls
Allocate one ringtone to the remain-
ing callers.
Walky Talky
Assign one ringtone to a Walky Talky
connection.
 right page (83) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)

VAR Language: en; VAR issue date: 040728

Setup 83

Setup Phone Pilot Install

C ¢T¢Phone Pilot You can download additional figures
¢Select function. on the Internet.
Your Phone Pilot accompanies you I Select entry in the list or
with instructions for many actions Inbox.
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Avatar.fm

you can perform with your phone. It J When installing a new

reminds you of important deadlines Phone Pilot you can give it
or birthdays. its own name.
A Phone Pilot is in the phone by §Yes§ Activate.
default and cannot be deleted.

Activate/deactivate
Off You can deactivate Phone
Pilot function.
Standard Select the included
"standard figure".
If you have additional figures down-
loaded, you can also install, activate,
or delete them:

I Select entry.

C Activate.
 left page (84) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

84 Setup

Setup Call setup Ö Condition set.

Not set.
C ¢T¢Call setup Õ
¢Select function. Ô Display if status is
unknown (e.g. with a new
Hide ID b SIM card).

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_CallSetup.fm

When you make a call, your phone Clear all b
number can be displayed on the All set diversions are cleared.
recipient's display (depending on the
service providers). Set up call divert (example)
To suppress this display, you can The most common condition for call
enable the "Hide ID" mode for all sub- divert is, for example:
sequent calls or just for the next call.
You may need to register separately
Unanswered b
with your service provider for these Select Unanswered.
functions.
I (Includes the conditions
Not reachable, No reply,
Call waiting b Busy, see below)
If you are registered for this service, C Confirm.
you can check whether it is set and
you can activate/deactivate it. Set Select.

Divert C Confirm.
You can specify the conditions under
which calls should be diverted to
Ï/ J Select or enter the phone
number to which the calls
your mailbox or other numbers. are to be diverted.
Status check §Mailbox§ Use existing mail-
You can check the current divert sta- box phonenumbers, or
tus for all conditions. After a short enter them if necessary.
pause, the current situation is trans- Confirm. After a short
mitted by the network and displayed. C pause, the setting is con-
firmed by the network.
 right page (85) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Setup 85

All calls b Additional information

All calls are diverted. Note that the divert is stored in the network
Icon in the top line of the and not in the phone (e.g., when the
Ç display in standby mode. SIM card is changed).
Not reachable Reactivate divert
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_CallSetup.fm

Divert occurs if phone is switched off The last divert has been stored. Proceed
as with "Set divert". The stored phone
or is out of range. number is displayed. Confirm number.
No reply
A call is only diverted after a delay Call screening b
that is determined by the network. Only calls from phone numbers that
The period can be set to a maximum are in the Phonebook/Addressbook
of 30 seconds in 5 second intervals. or in a group are signalled. Other
Busy calls are only displayed.
Divert occurs if a call is in progress.
If Call waiting is activated (p. 84), you
Any key answ.
will hear the call waiting tone during Incoming calls can be accepted by
a call (p. 26). pressing any key (except for B).
Receiving fax b Minute beep
Fax calls are diverted to a number
During the call, you will hear a beep
with a fax connection.
after each minute as a reminder of
Receiving data b the time elapsed. The recipient does
Data calls are diverted to a phone not hear this beep.
number with a PC connection.
 left page (86) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)
VAR Language: en; VAR issue date: 040728

86 Setup

Setup Phone setup Phone identity

C ¢T¢Phone setup The phone identity number (IMEI) is
¢Select function. displayed. This information may be
useful for customer service.

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_PhoneSetup.fm

Key tones §More§ Press several times to
Set the type of acoustic key display additional
acknowledgement. information about the
device.
Info tones Device check
Set service and alarm tones: After the last information page,
On/off Activate/deactivate tones. a self-test as well as individual test
are offered. If you select Selftest, all
Extended If switched on, a wider individual test are carried out.
range of service tones is
available, e.g.: end of Software version
menu reached, network Display the software version for your phone
connection interrupted. in standby mode:

Automatic switch off * # 0 6 #, then press §More§.

The phone switches off each day at

the set time. Memory assis.
Activate The memory assistant will help you if
there is insufficient phone memory.
§Time§ Press. If necessary, it is automatically
J Enter time started by applications.
(24-hour clock). After the capacity has been checked,
C Confirm. all files and folders are displayed
with their size and you can view,
Deactivate open or delete them as necessary.
§Manual§ Press.

C Confirm.
 right page (87) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)

VAR Language: en; VAR issue date: 040728

Setup 87

File system Master reset

Format Reset phone to default values (fac-
(Phone-code protected) tory setting). This does not affect the
SIM card or the network settings.
The telephone memory is formatted
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_PhoneSetup.fm

and all saved data such as ringtones, Alternatively enter in standby mode:
pictures, games, etc. is deleted. For-
matting can last longer than one
*#9999#A
minute.
Clean up
Creating more memory by deleting
temporary, non-required files.
 left page (88) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)
VAR Language: en; VAR issue date: 040728

88 Setup

Setup Clock §Options§ Open menu.

C ¢T¢Clock Set time

zone
Set time zone.
¢Select function.
Auto time Have the time zone auto-
Time/date zone= matically set by the net-
work.
The clock must be set correctly once

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Clock.fm

at start-up. Search city Search for a city.
§Change§ Press. Help Operating instructions.
First enter the date (day/
month/year), then the Date format
J
time (hours/minutes/
Select the display format for the
seconds).
date.
Additional information
If the battery is removed for longer than Time format
30 seconds, the clock must be reset. Select 24h or 12h.

Time zones Buddhist year b

Switch to the Buddhist year (not on
The time zone can be selected in the
all phone models).
world map or a city list:
World map Show clock
F Select the desired time Activate/deactivate time display in
zone. standby mode.
City list
Auto time zone b
Select a city in the
I selected time zone. The time is set automatically.
 right page (89) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Setup 89

Setup Connectivity GPRS info

C ¢T¢Connectivity Display of information on connec-
¢Select function. tion status.
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Connectivity.fm

GPRS b IrDA
(General Packet Radio Service) Your phone has an infrared inter-
face. With this interface, you can
C Switch GPRS on/off exchange data such as pictures, ring-
tones, Addressbook entries, busi-
GPRS is a new method for transmit- ness cards or organiser data with
ting data faster in the mobile net- other appliances which also have an
work. Use GPRS and if the network infrared interface.
has sufficient capacity, you can be
The infrared interface is on the right
connected to the Internet perma-
side of the phone. The distance
nently. Only the actual transmission
between the two devices must not
time is charged by the network oper-
exceed 30 cm. The infrared windows
ator. Some service providers do not
in both appliances must be aligned
yet support this service.
as accurately as possible with each
Shown in the display: other.
£ Activated and Shown on the display:
available.
¯ IrDA activated.
¢ Registered.
® During transmission.
¤ Temporarily interrupted.
 left page (90) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

90 Setup

Data services Select CSD settings, and/or

I GPRS settings.
Basic setting and activation of the
connection profiles for data trans- §Edit§ Select service and enter
mission such as MMS, WAP. data (see below).

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Connectivity.fm

The phone default setting varies §Save§ Save settings.
from service provider to service pro- CSD (Circuit Switched Data)
vider.
Dial-up Enter ISP number.
• The settings have already been number:
implemented by the provider. You
can start immediately. Call type: Select ISDN or
analogue.
• Access profiles have already been
created by your provider. Then Login: Enter login name.
select and activate profile. Password: Enter password (shown
• The access profiles must be as a series of asterisks).
configured manually. In this case, DNS1 / DNS 2: (optional).
you will receive the necessary
data from the service provider or GPRS (General Packet Radio Service)
via the "Setting Configurator" at You can only start to use GPRS once
(p. 125): you have activated GPRS on your
www.siemens-mobile.com/ phone (p. 89).
mobilescustomercare
Select profile APN: Enter service provider
address.
Select the profile.
I Login: Enter login name.
C Confirm selection. Password: Enter password (shown
as a series of asterisks).
Set profile
DNS 1 (opt.): (optional).
I Select the profile. DNS 2 (opt.):
§Options§ Open menu.
§Edit§ Open the selection.
 right page (91) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Setup 91

HTTP profile Authentication

The phone default setting varies Activate or deactivate encrypted
from service provider to service pro- WAP dial-up (CSD connections only).
vider.
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Connectivity.fm

• The settings have already been Fax/data

implemented by the provider. You Fax/data mode using a PC
can start immediately. With the phone and a connected PC,
• Access profiles have already been you can transmit and receive faxes
created by your provider. Then and data. Appropriate software for
select and activate profile. fax and data communication must
• The access profiles must be con- be available on your PC and there
figured manually. must be a connection to the phone.
If necessary, check with your service Fax and data services must be ena-
provider for details. You will find the bled by the service provider. There
current settings for the service pro- are variations in fax and data recep-
vider in the Internat at this address: tion, depending on the network.
www.siemens-mobile.com/ Please ask your service provider
mobilescustomercare (p. 125). about this.
Send voice/fax b
Make the settings.
I Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
 left page (92) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

92 Setup

Rec. voice/fax b
(Only if no special fax or data number
is available).
Start the required communication

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Connectivity.fm

program on your PC and select the
function on the phone during the call
(the PC will take over the connection).
End transmission
End transmission with PC-software
and/or press B.
Rec fax/data b
Your service provider has given you
a number for telephoning and
a fax/data number.
The call is signalled by a special ring-
ing tone and the type of call (fax or
data) is displayed. Now start the
communication program in your PC
to receive the fax/data.
 right page (93) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Setup 93

Setup Security Only ‚ b

C ¢T¢Security (PIN 2 or phone code protected)
¢Select function. Dialling options are restricted to
SIM-protected phone numbers in the
Auto key lock Phonebook. If only area codes are
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Security.fm

If activated, the keypad is locked entered, relevant phone numbers

automatically if no key has been can be added to these manually
pressed for one minute in standby before dialling.
mode. This prevents the phone from If the SIM card does not support
being used accidentally. However, PIN 2 input, the whole Phonebook
you can still be called and you can can be protected with the phone
still make an emergency call. code.
Additional information This SIM only b
The keypad can also be directly locked and
unlocked in idle state. (Phone-code protected)
In each case: The phone can be connected to
a SIM card when the phone code is
# Press and hold. entered. Unless the phone code is
known the phone will not operate
with a different SIM card.
Direct call
If the phone is to be used with a dif-
(Phone-code protected)
ferent SIM card, enter the phone
Only one phone number can be code when requested.
dialled (see also p. 27).
Codes
Description, see p. 17:
PIN control, Change PIN, Change PIN2,
Chg.phonecode
 left page (94) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

94 Setup

Barrings b When roaming

Barring restricts the use of your SIM You do not receive calls when you
card (not supported by all service are outside your home network. This
providers). You need a 4-digit net- means that no charges are incurred
work password for network barring. for incoming calls.
Your service provider will give you Status check

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Security.fm

this password. You may need to be The following information can be
registered separately for each displayed after a status check:
barring.
Ö Barring set.
All outgoing
Barring not set.
All outgoing calls except emergency Õ
numbers are barred. Ô Status unknown
(e. g. new SIM card).
Outgoing intl.
Clear all
(International outgoing)
All barrings are deleted. A password
Only national calls can be made. which the service provider will give
Out.int.x.home you is necessary for this function.
(International outgoing without
home country)
International calls are not permitted.
However you can make calls to your
home country when abroad.
All incoming
The phone is barred for all incoming
calls (forwarding of all calls to mail-
box provides a similar effect).
 right page (95) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)

VAR Language: en; VAR issue date: 040728

Setup 95

Setup Network Network info

C ¢T¢Network The list of GSM networks currently
¢Select function. available is displayed.
Indicates non-authorised
Line b Æ service providers
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Network.fm

This function is only displayed if it is (depending on SIM card).

supported by the service provider.
Two separate phone numbers must be Choose netwrk
registered on the phone. Network search is restarted. This is
Select line useful if you are not on your home
network or want to register on a dif-
Select the currently used phone ferent network. The network list is
number. rebuilt when Auto network is set.
Display current phone
\ number. Auto network
Protected Activate/deactivate, see also "Choose
(Phone-code protected) netwrk" above. If "Automatic net-
work" is activated, the next network
You may limit usage to one phone on the list is dialled in ranking order
number. of your "preferred networks". Other-
Additional information wise a different network can be
selected manually from the list of
Special settings may be made for each
phone number (e.g., melody, call divert the available GSM networks.
etc.) To do this, first switch to the required
phone number. Pref. network
Switch from phone number/connection in Enter your preferred service provid-
standby mode: ers here for when you leave your
0 Press. home network (e.g. if there are dif-
§Line 1§ Press. ferences in price).
Your service provider is displayed:
§List§ Display list of preferred
networks.
 left page (96) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)
VAR Language: en; VAR issue date: 040728

96 Setup

Create/change entry: User group b

<Empty> or select an existing entry, Depending on service provider, you
then select a new service can create groups with this service.
provider in the list and These can have access to internal
confirm. (company) information, for exam-
Record new service provider (last ple, or special tariffs apply. The

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Network.fm

entry in the list): details can be clarified with your
Furth.network service provider.
Select, enter the provider data and Active
save it. Activate/deactivate function. "User
group" must be deactivated for nor-
Additional information mal phone use.
If you are outside your home network, your
phone automatically dials another GSM Select group
network. You can select or add groups other
If the signal strength of the preferred net- than preferred groups (see below).
work is inadequate when you switch on the Code numbers for the groups are
phone, the phone may register in a different obtained from your service provider.
network. This can change when the tele-
phone is next switched on or if another net- All outgoing
work is selected manually. In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
Band selection b group are permitted. If the function
Select either GSM 900, GSM 1800 or is deactivated, only calls withinthe
GSM 1900. Make sure that your ser- group are permitted.
vice provider supports the selected Pref. group
band.
If activated, calls may only be made
Fast search within this standard user group
(depending on the network configu-
When this function is active, net- ration).
work reconnection is speeded up
(standby time is reduced).
 right page (97) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)

VAR Language: en; VAR issue date: 040728

Setup 97

Setup Accessories Automatic settings

• Permanent illumination:
C ¢T¢Accessories switched on.
¢Select function.
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_SetupAccessory.fm

• Key lock: switched off.

Car Kit • Charging the phone battery.
Only in combination with an original • Auto. activation of the Car Kit
Siemens handsfree Car kit (see profile when phone is inserted
accessories). The car kit profile is in cradle.
activated automatically as soon as
the phone is inserted into the cradle. Headset
Auto answer Only in conjunction with an original
(factory default: off) Siemens headset (see accessories). If
an original Siemens Headset is used
Calls are accepted automatically
the profile is automatically activated
after a few seconds. Eavesdropping
when the headset is plugged in.
is possible!
Auto answer
Å Shown on the display. (factory default: off)
Automatic switch off Calls are accepted automatically
(factory default: 2 hours) after a few seconds (except where
the ringer is switched off or set to
The phone is powered by the car's
beep). You should therefore be
power supply. You can adjust the
wearing the headset.
time between switching off the igni-
tion and the automatic switching off Automatic setting
of the phone. Accept call with Call key or PTT key
Car loudspk. (Push To Talk), even when the auto
key lock is activated.
Improves playback in certain circum-
stances. Auto answer
If you do not notice that you phone has
accepted a call, there is the danger that the
caller may eavesdrop.
 left page (98) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)
VAR Language: en; VAR issue date: 040728

98 My menu

My menu
C Press. Change menu
§My menu§ Press. You can replace each entry (1–10)
with another entry from the selec-

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_MyMenu.fm

Create your own menu with fre-
quently used functions, phone num- tion list.
bers or WAP pages.
I Select the required entry.
The list of 10 entries is preset. You
can, however, change it as you §Change§ The function list is opened
want. for selection.
Select the new entry from
Use I the list.
Confirm. The entry is
I Select the required entry. C saved.
C Confirm. If Phonebook is selected,
the phone number must
Or also be selected; if Inter-
If the entry selected is net is selected, the book-
A a phone number, you can mark must also be
also call it with the Call selected.
key.
Reset all
(Telephone code required)
§Reset all§ Select. After a safety
query, the pre-assign-
ment is reset.
 right page (99) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Fast access key 99

Fast access key

You can assign one important phone
number of a function to each one of
Soft keys
the two soft keys and number Change
keys 2 to 9 (speed-dial numbers).
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_FastDial.fm

The phone number can then be For example, the Internet function is
dialled or the function can be started assigned to the soft key. To change
at the touch of a button. this (in standby mode):
§Internet§ Press briefly.
§Change§ Scroll to new assignment
Z £ X
in the list.
Service Provider
C Confirm.

• Special case Phone number. Pick

out a name from the Phonebook/
01.10.2004 10:10 Addressbook for assignment to
Internet ì Help the key.
• Special case Bookmark. Scroll to
a URL in the bookmark list for
. assignment to the key.
Additional information
The service provider may have already Apply
assigned functions to a soft key (e.g
access to "SIM services" or direct call-up of In standby mode:
the Internet portal). It may not be possible
to modify this key assignment. Application
The left soft key may sometimes be The "Internet" is just used as an
replaced automatically by p/À to example here.
access a new message for example. §Internet§ Press and hold, the appli-
cation is started.
Phone number:
The setting "Carol" is used here only
as an example.
§Carol§ Press and hold, the phone
number is dialled.
 left page (100) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

100 Fast access key

Speed keys Apply

Number keys 2 to 9 can be used as Select a stored phone number or
speed dialling numbers for fast start a stored application (e. g.
access. Number key 1 is reserved for Internet).
the mailbox phone number (p. 68) In standby mode:
and number key 0 is reserved for

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_FastDial.fm

switching over two connections dur- 3 Press briefly.
ing use (p. 95).
The assignment of the number key 3
Change is displayed above the right soft key
e.g.:
In standby mode:
§Internet§ Press down.
number key briefly press
3 (e.g. 3). Or simply
This number is still free: 3 Press and hold.
§Set§ Press.
Select a new function
from the list and confirm
with §OK§.
Or An assignment has
already been made to this
key (assignment dis-
played above the right
soft key):
C Press briefly.
§Change§ Scroll to application in the
list.

C Confirm.
• Special case Phone number. Pick
out a name from the Phonebook/
Addressbook for assignment to
the key.
• Special case Bookmark. Scroll to
a URL in the bookmark list for
assignment to the key.
 right page (101) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Organiser 101

Organiser
Calendar Daily view
Special displays:
C ¢Q¢Calendar
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Organizer.fm

Description of appointment.
You can enter appointments in the
calendar. Time and date must be set Navigation:
for the Calendar to work correctly. F One day forward/back.
The calendar offers you three views: To the start/end of the day
I or next/last entry.
Monthly view
Special colour coding: Calendar setup
Day with entries for appointments,
day-long appointments, weekend C ¢Q¢Calendar setup
Navigation: Start of day:
One day forward/back. Hour when the working day begins.
F
Start of week:
One week forward/back.
I Weekday on which the monthly and
C Daily view open. weekly view on the left starts
Set weekend:
Weekly view Set the days for the weekend.
Special displays:
Show birthdays:
Appointments are shown as a verti- Yes/No.
cale colour bar on the horizontal
hour division.
Navigation:
F One day forward/back.
Forward/backward by the
I hour through the day.
 left page (102) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

102 Organiser

Appointments Different input/selection fields are

displayed depending on the type.
C ¢Q¢Appointments The number of fields can be
restricted, see Standard at the end
Appointments are displayed in
of the list.
chronological order in a list.

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Organizer.fm

Description:
Enter new appointment Description of appointment.
<New entry> Phone number:
Select. Enter a phone number or select one
Types: from the Addressbook.
Memo Voice memo:
c Text input for description Enter a voice recording, see
Voice memo Dictat.machine, p. 105.
Location:
d Enter voice memo. Shown
with alarm. Location of appointment.
Call Whole day:
e
Enter phone number to All-day appointment: Yes/No
be displayed with the
Start date:
alarm.
Date when appointment starts.
Meeting
f Start time:
Text input for description
Time when appointment starts.
Holiday
End date:
g
Enter start and end date.
Date when appointment ends.
Birthday
End time:
h
Enter name and date.
Time when appointment ends.
 right page (103) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Organiser 103

Alarm time: Information on the alarm

On/off or Silent alert. When the set date and time are
Enter the timespan before reached there is an audio and a vis-
J the appointment and ual alarm. If an alarm is missed it
select the time unit: appears in the list of missed appoint-
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Organizer.fm

Minutes, Hours, Days ments (p. 104).

Alarm type Memo: The text is
Reoccurrence:
displayed.
Select a timeframe for repeating the
appointment: Alarm type Meeting: The text is shown
in the display.
No, Daily, Weekly, Monthly, Yearly
Alarm type Call: The phone number
Enter a parameter for repeating: is displayed and can be dialled
Forever, Until, Occurrences (number) immediately.
If Weekly is selected, certain week- Alarm type Birthday: You can send
days can be highlighted. special birthday greetings by SMS,
MMS, e-mail or a call via §Options§.
Standard
In the list, select those fields which With Snooze you can set a repetition
are to be offered for future entries. of the alarm.

Additional information Tasks

Display above set alarms:
¹ Alarm clock.
C ¢Q¢Tasks
A task is displayed like an appoint-
» Appointment. ment in the agenda of the selected
An alarm sounds even when the phone is day. However, unlike an appoint-
switched off (except in Aircraft mode, ment it does not require a time.
p. 76). The phone does not go to standby When no time is entered the task
mode. To deactivate it press any key. appears at the top of the list every
day until it is marked as completed.
The entries are made in the same
way as Appointments, see this sec-
tion. Then:
 left page (104) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

104 Organiser

Status: Missed appts.

Choose between: Done or Outstanding
Priority:
C ¢Q¢Missed appts.
Events with an alarm (Appointments,
Selection in 5 levels of Lowest bis
Tasks) to which you have not reacted
Highest.

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Organizer.fm

are listed for reading.
Use date
If activated with Yes, the following Organiser options
time-input option is offered.
Depending on the application used
Due date:/Expiry time: (Calendar, Appointments, Tasks, Notes)
Enter the date and time by when the and the current situation, different
task is to be completed. functions are offered.
Alarm: and Standard as for Appoint- §Options§ Open menu.
ments.
Delete until Delete all entries prior to
a certain date.
Notes Delete done Delete all completed
C ¢Q¢Notes tasks.
Write and manage brief text notes. Activate/ Switch alarm on/off.
Protect confidential information Deactivate
using a phone code. Confidential Protect note with phone
code. We recommend that
Enter a new memo you do not store any pass-
<New entry> words (PIN, TAN etc.) as
notes.
Write a normal note.
<Confidential> (For standard functions see p. 15)
Write a confidential note.
The phone code is
required.
Enter text. The first line is
J displayed later as a "title"
in the notes list.
§Options§ Open menu.
Save Save note.
 right page (105) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Organiser 105

Dictat.machine C Pause/recording
alternately.
C ¢Q¢Dictat.machine D End recording.
Use the dictating machine to record The recording is automat-
short voice memos. ically saved with a time
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Organizer.fm

• Use your phone as a dictating stamp. Rename with

machine when on the move. §Options§.
• Record a memo as a reminder or
as a note for others.
Playback
Select the desired
• Add a voice memo to an appoint- I recording.
ment in the Calendar.
Playback/pause,
• Record a call.
alternately.
C
Warning! D /E Press and hold rapid
The use of this feature may be subject to rewind and fast forward.
restrictions under criminal law.
Please inform the other party to the Dictating machine options
conversation in advance if you want to §Options§ Open menu.
record the conversation and please keep
such recordings confidential. Loudspeaker Playback via the built-in
You may only use this feature if the other loudspeaker.
party to the conversation agrees.
(For standard functions see p. 15)

New recording
<New entry>
Select.
The remaining time avail-
able as well as the record-
ing time are shown in the
display.
A brief tone sounds when
C the recording starts. Now
say the text.
 left page (106) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

106 Organiser

Time zones Time zone options

§Options§ Open menu.
C ¢Q¢Time zones
The time zone can be selected in the Set Specify the time zone.
world map or a city list: Auto time The time zone is switched

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Organizer.fm

World map zone= automatically to local time
by the network.
F Select the desired
recording. Search city Search for a city.
City list Help Operating instructions.
Select a city in the
I selected time zone.
 right page (107) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Extras 107

Extras
Walky Talky b Preparing a session
This application can be used to
simultaneously connect multiple
C ¢S¢Walky Talky
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Extras.fm

subscribers. Like a normal Walky <New session>

Talky, only one subscriber can speak Select.
at a time. The others can only listen
until the speaker allows others to The possible functions as well as
talk. already added subscribers are
displayed.
A recipient is selected using their
Walky Talky address (WT ID) or their You have several options to combine
phone number. Groups created in the subscribers:
advance (p. 110) can be invited to <Add from d>
a session. Your service provider will Search and mark recipient
supply you with your own WT I in Addressbook.
address.
The recipient can also use a mobile C Add recipient.
phone, as well as a PC with an
Internet connection and headset Or
(depending on service provider). <Add f. sess.>
To use the application, GPRS (p. 89) Select a subscriber from
must be switched on and Walky Talky
I an earlier session.
(p. 111) activated. Or
<Enter WT ID>

J Enter WT ID of a recipient.

§Select Add entries.

 left page (108) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

108 Extras

Or Additional information
<Add from grp> Depending on the setting for Hold mode
(p. 112) A must be pressed and held as
I Select group. long as one speaks.
C Open If the person with speaking rights takes
a long pause, the speaking rights are
automatically released again.

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Extras.fm

I Select and mark recipient.

§Select Add recipient. Inviting additional subscribers

You can invite additional subscribers
Starting a session during a session.
If all the desired subscribers are §Options§ Open menu, select Invite
combined, start the session: and mark new subscribers.
The subscribers are dis-
A played, and the author- You are being invited
ised speaker is shown in The invitation is shown in a window.
bold. You can accept or refuse this
invitation.
Speaking rights
The list of subscribers is displayed. C Accept the invitation.
The current authorised speaker is
The list of subscribers is displayed.
shown in bold.
A Request speaking rights. Leaving the session and ending
The delegation of speak-
Only if you yourself started the
ing rights is displayed and
session.
then the requester can
talk. §Options§ Open menu.
Returning speaking Quit session
A rights. Select. You will leave and
end the current session.
 right page (109) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Extras 109

Letting the session run in the Clear Delete the list except for
background the last entry.
The current session remains active in Handsfree Switch on handsfree
the background. A phone call ends talking (loudspeaker).
the session.
Request Request information
Putting Walky Talky in the background pres. about the readiness to
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Extras.fm

receive for a subscriber.

B Press and hold.
Volume Set volume. I is also
Using Walky Talky again possible.
C¢S¢Walky Talky (For standard functions see p. 15)

Sessions Continue session again. Sessions

Walky Talky options C ¢S¢Walky Talky¢Sessions
§Options§ Open menu. Display subscriber list for the current
Different functions are offered session. The authorised speaker is
depending on the situation. shown in bold.

History view Display of subscribers in

order of speaking.
Session view Display of subscribers for
the current session.
Quit session End session.
Session Start time, Status,
details Duration, Type etc.
User details Display subscriber
properties (see also
My presence, p. 111).
Add to d Save WT ID in
Addressbook.
Invite user Invite a subscriber to
a session.
Add to group Add subscriber to the
group.
 left page (110) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

110 Extras

Records Membership:
Set if membership in this
C¢S¢Walky Talky¢Records group is open to everyone
Select the list of received and made (Open) or if the subscriber
WT calls as well as the option to is limited to the member
delete all lists. list (Restricted).
You can mark subscribers for one Memberlist Add member to the

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Extras.fm

session in the list. group.
Rejectlist List of subscribers which
A Start session. may not become mem-
bers of this group.
The function Create as group in
§Options§ can be used to combine §Save§ Save group.
entries in the list into a new group. <Rejectlist>
Groups List of subscribers with whom
a session is not desired. Invitations
C¢S¢Walky Talky¢Groups from this list are always refused
automatically.
Only your groups are displayed and
can be edited. <Acceptlist>
Setting up a new group List of subscribers whose invitation is
automatically accepted (see also
<New entry>
Auto answer p. 111).
Select.
Starting a session (group conversation)
J Fill in input fields:
I Select group.
Walky Talky ID:
Subscriber ID. A Start session.
Name: Group name.
Type Instant or Chat.
Max. users:
Maximum number of
group members ("0"
means "no limit").
 right page (111) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Extras 111

Viewing group properties Settings

I Select group. C¢S¢Walky Talky
C View properties.
¢Settings
Some settings must be made by the
§Options§ Open menu. user or can be copied from your
service provider.
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Extras.fm

Add to d Copy group ID to the

Addressbook. Select and confirm the
I function, area.
Edit Edit (your own) group.
Dwnl. settings
Copy ID to clip Save group ID (WT ID) Download settings from the server
in the clipboard. of the service provider.
Memberlist Display the member list. WT online
Rejectlist Display the refused Log in/out, status information for
subscribers. login.
Block WT calls
My presence Allow/block Walky Talky calls.
C ¢S¢Walky Talky Auto answer
¢Presence¢My presence Automatically accept invitations
The following properties (yours) can because of the Acceptlist (p. 110).
be set:
Use Acc.& Rej.
Interruption
Activate/deactivate the use of
Allow, forbid interruption
Acceptlist/Rejectlist p. 110/p. 110).
Mood Display your mood.
Walky Talky
Notes Note.
• WT enabled
Activate/deactivate Walky Talky.
• History length:
Number of entries in the list.
• Timeout(min.):
Walky Talky is put in the
background if not used after an
adjustable amount of time.
 left page (112) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

112 Extras

• Hold mode
Depending on the setting, A SIM services (optional)
must be pressed and held to
speak.
C ¢S¢SIM services
Your service provider may offer spe-
• Default view cial applications such as mobile
Session view or History view. banking, share prices, etc. via the
SIM card.

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Extras.fm

• Request pres.
The saved properties are If you have such a SIM card, the
displayed. SIM services will appear in the main
Server menu under "Extras" or directly
above the soft key (on the left).
Settings for the server. Please check
with your service provider. U Symbol for SIM services.
Advanced
Where there are several applications,
Further settings. Please check with these are displayed in a SIM services
your service provider. menu. With the SIM services menu,
Additional information your phone can support future addi-
tions in your service provider's user
If an accessory such as the car kit is package. For further information,
connected, its PTT key also functions as
a WT-key. please contact your service provider.

Alarm clock
C ¢S¢Alarm clock
The alarm will ring at the time set by
you, even when the phone is
switched off.
F Activate/deactivate the
alarm.
H Switch to time setting.
 right page (113) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Extras 113

J Set alarm call time

(hh:mm).
Sound recorder
Use the sound recorder to record
H Switch to the week days. noises and tones for use as ring
tones. The tone recording is nor-
F Navigate to the various mally started by other applications/
days. functions such as "assign ring tone".
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Extras.fm

Display options: alarm call

C time and days. New recording
é Alarm clock Start from main menu
C ¢S¢Sound recorder
<New entry>
¹ Select.
§On§ The remaining time avail-
07:30 able as well as the record-
Mo Tu We Th Fr Sa Su ing time are shown in the
display.
Edit ì OK Start it from another application
as follows
Set days for alarm calls. The recording display appears:
C Press again to delete the A brief tone sounds when
highlighting. C the recording starts.
Press and hold to highlight/
unhighlight all the days. C Pause/record alternately.
§OK§ Confirm setting. D End recording.
Additional information The recording is saved
Screen display in standby with a timestamp in the
folder Sounds. Rename
¹ mode: alarm clock activated.
With Snooze you can set the alarm to with §Options§.
repeat. §Insert§ Transfer recording into
the application.
 left page (114) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

114 Extras

Playback Calculator
Select the desired C ¢S¢Calculator
I recording.
The calculator can be used in a basic
Playback/pause, version and with an advanced range
C alternately. of functions. The input line and two
D /E Press and hold rapid calculation lines (including the

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Extras.fm

rewind and fast forward. matrice with the calculation func-
§Options§ Open menu. tions) are located in the top display
half.
Loudspeaker Playback via the built-
in loudspeaker. J Enter number(s).
Set as... Set the recording as F /I Navigate functions.
a ringtone.
Use function. The result is
(For standard functions see p. 15)
C calculated and displayed
immediately.
Basic functions:
+, -, *, / Basic calculation types.
= Result.
1/x Conversion
% Convert to percentage.
. Decimal point.
± Sign change "+" / "–"
§Options§ Expansion of the range of
functions:
x Square root
2 Square
x
e Exponent.
MS save displayed number.
MR Call up saved number.
M+ Insert number from memory.
 right page (115) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Extras 115

Calculator options Example of type Velocity units:

§Options§ Open menu. Type Units
Convert Call up the unit con- Velocity Kilometres/h, Metres/sec,
verter with the current Miles/h, Miles/sec, Knots,
result. Mach
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Extras.fm

Clear all Delete all units. Convert

Extended mode/ Convert calculation Select the source unit/
Basic mode functions.
F currency.
(For standard functions see p. 15)
H Switch to the input field.

Unit converter Enter the quantity to be

J converted.
C ¢S¢Unit converter H Switch to the selection
You can convert various measure- field.
ment units into other measurement Select the target meas-
units.
F urement unit / currency
The following types are offered with The result is displayed.
various units: You can use both input fields alter-
Velocity nately.
Energy Special key functions:
Mass
Pressure * Set decimal point.
Time
Volume # Change prefix.
Area
Length Currency
Power When you call up the function, you
Temperature must enter a basic currency into
Currency which the conversions are to be
made.
Enter currency
J (e. g. euro)
§Save§ Store entry.
 left page (116) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

116 Extras

Now enter the name and exchange

rate of the currency to be converted.
Countdown
§Options§ Open menu. C ¢S¢Countdown
A set time elapses. The last
Add currency Enter new currency and
3 seconds are indicated by a beep.
exchange rate.
At the end a special beep sounds.
Set as base Use entered currency as

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Extras.fm

Display, also in standby mode.
basic currency.
If no time has been enetered:
Edit rate Change the exchange
rate of the basic currency. C Open input window
Calc. Start calculator. §Edit§ Activate input field.
(For standard functions see p. 15)
J Set period of time.

Stopwatch §OK§ Confirm.

Start.
C ¢S¢Stopwatch C
Two intermediate times can be If a countdown time is specified:
recorded and saved.
Start countdown.
Display, also in standby mode.
C
While the time is elapsing:
C Start/stop.
Interrupt counter.
Save intermediate time.
* C
Let counter continue
After a stop: C running.
C Reset to zero. §Reset§ Reset counter to starting
time.
Stopwatch options
§Options§ Open menu.
Stopwatch Display saved entries.
list
(For standard functions see p. 15)
 right page (117) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Extras 117

Remote synchronisation Server sett.

Providers Display the current service
C ¢S¢Remote syncr. provider.
You can use this function remotely
to access externally filed data Homepage e.g.
: www.siemens-mobile.com
(addresses, calendar, etc.) and syn-
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Extras.fm

chronise these with the data on your Port: Enter port number, e.g. 80.
phone. The data can, for example,
be saved on a company computer or Login: Enter user name (Login
in the Internet. name).
www.siemens-mobile.com/syncml Password: Enter password (shown as a
series of asterisks).
Syncronise
Calendar
§Sync§ The computer is selected path
and synchronisation Contacts
started. When completed, path
the actions which have
Notes path
been performed are dis-
played. Task path
§Next§ Scroll through the various HTTP Confirmation required; Yes/
authenti- No (if No, the input fields are
displays.
fica.: not visible).
Sync. setting HTTP Enter name.
name:
The following settings can be made
prior to synchronisation: HTTP Enter password.
password:
Sync. profile
You can choose between 5 profiles.

I Select profile.

C Activate profile.

or
§Edit§ Set profile
 left page (118) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

118 Extras

Last sync: Device manag.

Time of the last synchronisation.
Sync. mode
C¢S¢Device manag.
If you were informed about software
• Sync data: Modified data or All data
updates by a push message, you can
• Sync direction: Two-way, establish a connection to the
Mobile update or Server update provider's server using the Device

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Extras.fm

Date range manager, so you can download
them. When downloading is
Select On/off
finished, you will be asked to switch
Enter the time in weeks in which the phone off and on again.
entries (past and future) are to be Afterwards, the software of your
synchronised. phone will be updated. Please follow
Sync items: the instructions in the display.
Highlight database areas to be The phone default setting varies
synchronised: from service provider to service
provider:
Calendar
• The settings have already been
Addressbook
implemented by the provider. You
Notes can start immediately.
Tasks • Access profiles have already been
C Save settings. created by your provider. Then
select and activate profile.
• The access profiles must be
configured manually. If necessary,
check with your service provider
for details. You will find the
current settings for the service
provider on the Internet at
www.siemens-mobile.com/
mobilescustomercare
under "FAQ".
 right page (119) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Extras 119

Active profile
A standard profile for downloading
the current software of the
operating system is displayed.
§Sync§ Establish a connection to
the active profile.
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Extras.fm

Or
§Edit§ Call up profile list.

I Select profile.

C Activate profile.

Or
§Edit§ Set profile.

Last connect.
Display last connection.
 left page (120) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

120 Media player

Media player Melodies/video

When you are viewing a picture/ The media playback offers the fol-
video or listening to a melody, the lowing functions for melody and
application starts a media playback. video playback:

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_MediaPlayer.fm

Scroll to the next media Play or pause, depending
F file.
C on the situation.

Set volume.
Pictures
I
Mute.
The following functions can be *
applied to a displayed picture: §Stop§ Stop function.
Zoom function if the dis-
C played picture has a B End playback.
higher resolution than the
display. The two soft keys Options
(+/–) enlarge/reduce the
§Options§ Open menu.
picture. The joystick
moves the picture detail. Different functions are offered
depending on the starting situation
5 Centre the picture. and the object.
Switch to full-picture
# mode and back again. Volume Set the volume with the
joystick.
0-9 Switch on display illumi-
Set as...
nation (only in full screen Set picture as Wallpaper,
mode). Logo for example, and
sounds for Incoming call,
§Send§ e.g. send via MMS or Startup melody, for
e-mail. example.
Slideshow Automatic run-through in
full-picture mode. Individ-
ual picture connection with
joystick.
Edit Access to picture proces-
sing (application must be
loaded).
(For standard functions see p. 15)
 right page (121) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

My stuff 121

My stuff
To organise your files, you can use
the file system like a PC file manager.
Own file options
§Options§ Open menu.
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_MediaFolder.fm

There are some folders in My stuff for

the various data types for this pur-
Move Place highlighted file(s)
pose.
or folder in temporary
Remember that pictures and sounds memory.
may be protected (DRM, p. 13).
Copy Place highlighted file(s)
C ¢N or folder in temporary
memory.
The list of the folders and files is dis-
played. Paste Transfer content of tem-
Navigation porary memory into cur-
rent folder.
I Select file/folder in lists. New folder Create a new folder and
name it.
The cursor can be moved
F/I freely in the preview. Thumbn. view Switch over to miniature
view.
Open folder or start file
C with related application Attributes Display information on
file or folder selected.
<New picture>/<New sound> (For standard functions see p. 15)
The application for the folder cur-
rently selected is loaded.

<New downl.>
The WAP browser is started and the
download page displayed.
 left page (122) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

122 My stuff

Index structure Depending on the service provider, the

structure, content and functionality of My
Some folders have already been cre- stuff may vary.
ated for different data types in My
stuff. These folders cannot be

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_MediaFolder.fm

changed.
Folder Description Format
Pictures Pictures bmp
bmx
jpg/jpeg
png
gif
Videos Videos 3gp
Animations Switch on/off bmx
animations gif
Sounds Melodies mid
amr
wav
Themes Loaded theme sdt
(zipped)
Theme stc
configuration
(unzipped)
Skins Loaded user scs
interfaces.
Games Java archive jar
Download info jad
Applications Applications, *
such as Photo
Editor or
Download
Assistant.
Misc. Internet sites. html
wml
 right page (123) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Mobile Phone Manager 123

Mobile Phone Manager

The Windows® PC program, MPM SMS and EMS management
(Mobile Phone Manager) enables
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_PhoneManager.fm

you to use extended phone func-

tions from your PC. Among other
things, you can easily manage your
phone’s Addressbook, as well as
read, store and send SMS and EMS
messages. The phone and PC com- Write EMS and SMS messages from
municate via IrDA or a data cable the convenience of your PC. Use all
(See Accessories, p. 133). the options your PC offers you and
use your sounds and pictures to cre-
ate SMS and EMS messages. You can
read, forward, print, delete and
archive your messages.

Backup and restore

You can download the software
from the Internet:
www.siemens-mobile.com/cx70

Contacts Management
With the back-up function, you can
regularly make a back-up copy of
your phone data on the PC. If you
ever lose the data on your phone or
replace the phone, you can quickly
You can use contacts management re-instate all data with the restore
to manage the personal contacts you function. Please observe any possi-
have stored in your phone, to add ble restrictions for DRM-protected
new ones and to delete and edit data.
them. You can compare and copy
contacts between your phone, Out-
look®, Lotus Notes™ and other Sie-
mens phones (including Gigaset).
 left page (124) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

124 Mobile Phone Manager

Bookmark Management Processing pictures and photos

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_PhoneManager.fm

Use your PC to browse on the Inter- Picture/photo processing offers you
net and define your preferred Inter- the opportunity to conveniently cre-
net sites. Save the Internet addresses ate, edit and manage pictures and
as bookmarks on your phone so that photos. Filters and effects are
you can quickly call them up at offered to help you create colourful,
a later time when you are on the attractive graphics. The user-friendly
move. interface makes child’s play of trans-
ferring pictures/photos from or to
Phone explorer the mobile phone, and of changing
the graphic settings.

Ringtone Management

You can use the phone explorer to

read your phone’s file system. Files
such as pictures, sounds and much
more can easily be copied between The sound module allows you to
the phone and PC by dragging and manage nearly all sound formats
dropping. easily and to save them on the
phone. This phone does not support
GPRS modem MP3 functionality.

The GPRS modem establishes an

Internet connection via your mobile
phone so that you can surf the Inter-
net on your laptop while on the
move and at the touch of a button.
 right page (125) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Questions & Answers 125

Questions & Answers

If you have any questions about using your phone, visit us at
www.siemens-mobile.com/mobilescustomercare anytime. For additional help, we have
listed below some frequently asked questions and answers.
Configuration service
To help you set up your mobile phone for the data service WAP, MMS, e-mail and Internet,
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_FAQ.fm

you can use a configuration service. This service is used to have the necessary settings for
your mobile phone sent to you by SMS. We recommend that you contact your network
provider who will send you the configuration messages.
As an alternative you can also use the "Setting Configurator" at
www.siemens-mobile.com/mobilescustomercare. Siemens will then send you the
configuration messages. Please follow the instructions contained in those messages.
Problem Possible causes Possible solution
Phone cannot be On/Off key not pressed long Press On/Off key for at least two seconds.
switched on. enough.
Flat battery. Charge battery. Check charging indicator in the dis-
play.
Battery contacts dirty. Clean contacts.
See also below under “Charging
error”
Too little standby Frequent use of organiser and Restrict use if necessary.
time. games.
Fast search activated. Deactivate speed search(p. 96).
Display illumination on. Switch off display illumination (p. 80).
Unintentional keystrokes Activate key lock (p. 93).
(illumination!).
Charging error Battery totally discharged. 1) Plug in charger cable, battery is on charge.
(charge icon not 2) Charge icon appears after approx. 2 hours.
displayed). 3) Charge battery.
Temperature out of range: Make sure the ambient temperature is right, wait for
+5 °C to +45 °C. a while, then recharge.
Contact problem. Check power supply and connection to the phone.
Check battery contacts and telephone connection
socket, clean them if necessary, then insert battery
again.
No mains voltage. Use different mains power socket, check mains
voltage.
Wrong charger. Only use original Siemens accessories.
Battery faulty. Replace battery.
 left page (126) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

126 Questions & Answers

Problem Possible causes Possible solution

SIM error. SIM card not inserted correctly. Check that the SIM card is inserted correctly (p. 9).
Dirty SIM card contacts. Clean SIM card with a dry cloth.
SIM card with wrong voltage. Use 3V SIM cards only.
SIM card damaged Carry out a visual check. Change SIM card at serv-
(e.g. broken). ice provider.
No network connec- Weak signal. Move higher, to a window or an open space.
tion.

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_FAQ.fm

Outside GSM range. Check service provider's coverage area.
Invalid SIM card. Complain to the service provider.
New network not authorised. Try manual selection or select a different network
(p. 95).
Network call barring is set. Check network barrings (p. 94).
Network overloaded. Try again later.
Phone loses net- Signal too weak. Reconnection to another service provider is auto-
work. matic (p. 95). Switching phone off and on again can
speed this up.
Calls not possible. Second line set. Set first line \ (p. 96).
New SIM card inserted. Check for new barrings.
Charge limit reached. Reset limit with PIN 2 (p. 39).
Credit used up. Load credit.
Certain uses of Call restrictions are in place. Barrings can be set by service provider.
phone not possible. Check barrings (p. 94).
Impossible to make Phonebook/Addressbook is full. Delete entries in Phonebook /Addressbook (see
entries in Phone- Standard functions, p. 15).
book/Addressbook.
Voice message not Call divert to mailbox not set. Set call divert to mailbox (p. 68).
functioning.
ã flashes to indi- SMS memory is full. Delete (see Standard functions, p. 15) or file SMS
cate an SMS. (p. 46).
ä flashes to indi- MMS memory full. Delete MMS (see Standard functions, p. 15).
cate an MMS.
å flashes to indi- Phone memory full. Delete messages, pictures, videos, games or appli-
cate an MMS. cations.
Function cannot be Not supported by service pro- Contact your service provider.
set. vider or registration required.
Capacity problems Phone memory full. Delete files in the relevant areas. You can use the
with, for example, memory assistant to delete specific files (p. 86).
Games & More, ring-
tones, pictures, vid-
eos, SMS archive.
 right page (127) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Questions & Answers 127

Problem Possible causes Possible solution

No WAP access, Profile not activated, profile set- Activate or set WAP profile (p. 72). If necessary ask
downloading not tings wrong/incomplete. your service provider.
possible.
Text message can- Service provider does not sup- Contact your service provider.
not be sent. port this service.
Phone number for service cen- Set service centre (p. 47).
tre not set or incorrectly set.
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_FAQ.fm

SIM card contract does not sup- Contact your service provider.
port this service.
Service centre too busy. Repeat message.
Recipient does not have a Check.
compatible phone.
EMS pictures & Destination phone does not sup-
sounds are not dis- port the EMS standard.
played at the desti-
nation phone
No Internet access Incorrect WAP profile set, or Check WAP settings; (p. 72) contact your service
possible. wrong or incomplete settings. provider if necessary.
PIN error/ Three wrong entries. Enter the PUK (MASTER PIN) supplied with the
PIN2 error. SIM card according to the instructions. If the PUK
(MASTER PIN) has been lost, please contact your
service provider.
Phone code error. Three wrong entries. Contact Siemens Service (p. 128).
Service provider No authorisation for this service. Contact your service provider.
Code error.
Too few/too many Functions may have been Check with your service provider.
menu entries. added or deleted by the service
provider via the SIM card.
No fax possible. Wrong settings in the PC. Check settings (p. 91).
No authorisation for this service. Contact your service provider.
Charge meter does Charge pulse is not transmitted. Contact your service provider.
not work.
Damage
Severe shock. Remove battery and SIM and re-insert them. Do not dismantle the phone!
Phone became wet. Remove battery and SIM. Dry immediately with a cloth, but do not apply heat. Dry
connector contacts thoroughly. Stand mobile upright in an air current. Do not disman-
tle the phone!

Reset all settings to factory default p. 87:

*#9999#A
 left page (128) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
VAR Language: en; VAR issue date: 040728

128 Customer Care

Customer Care
Austria.............................................05 17 07 50 04
We offer fast, individual advice! You have Bahrain .................................................... 40 42 34
several options: Bangladesh.......................................0 17 52 74 47
Our online support on the Internet: Belgium.............................................0 78 15 22 21
Bolivia ...............................................0 21 21 41 14
www.siemens-mobile.com/

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Hotline.fm

Bosnia Herzegovina..........................0 33 27 66 49
mobilescustomercare Brazil............................................0 80 07 07 12 48
We can be reached any time, any place. Brunei ................................................. 02 43 08 01
You are given 24 hour support on all Bulgaria............................................... 02 73 94 88
aspects of our products. Here you will find Cambodia ........................................... 12 80 05 00
an interactive fault-finding system, a com- Canada ........................................1 88 87 77 02 11
pilation of the most frequently asked ques- China ...........................................0 21 38 98 47 77
Croatia ..............................................0 16 10 53 81
tions and answers, plus user guides and Czech Republic.................................2 33 03 27 27
current software updates to download. Denmark ............................................. 35 25 86 00
When calling customer service, please Dubai ................................................0 43 96 64 33
have ready your receipt and the phone Egypt.................................................0 23 33 41 11
identity number (IMEI, to display press Estonia................................................ 06 30 47 97
Finland ............................................09 22 94 37 00
* #06#), the software version (to display,
France.............................................01 56 38 42 00
*
press #06#, then §More§) and if available,
your Siemens Service customer number. Germany *....................................0 18 05 33 32 26
Greece ............................................80 11 11 11 16
You will also find the most frequently Hong Kong .......................................... 28 61 11 18
asked questions and answers in the sec- Hungary ..........................................06 14 71 24 44
tion entitled "Questions & Answers" in this Iceland .................................................. 5 11 30 00
user guide on p. 125. India .............................22 24 98 70 00 Extn: 70 40
Indonesia .....................................0 21 46 82 60 81
You can also get personal advice about our Ireland.............................................18 50 77 72 77
range of products on our Premium Hotline: Italy .................................................02 24 36 44 00
United Kingdom ............................ 0906 9597500 Ivory Coast.......................................... 05 02 02 59
(0.75 £ per minute) Jordan...............................................0 64 39 86 42
Qualified Siemens employees are waiting to Kenya.................................................... 2 72 37 17
Kuwait ................................................... 2 45 41 78
offer you expert information about our Latvia .................................................... 7 50 11 18
products and installation. Lebanon.............................................. 01 44 30 43
In some countries repair and replace serv- Libya ...............................................02 13 50 28 82
ices are impossible where the products are Lithuania ...........................................8 52 74 20 10
not sold through our authorised dealers. Luxembourg........................................ 43 84 33 99
Macedonia .......................................... 02 13 14 84
If repair work is necessary, please contact Malaysia....................................+ 6 03 77 12 43 04
one of our service centres: Malta .......................................+ 35 32 14 94 06 32
Mauritius ............................................... 2 11 62 13
Abu Dhabi .........................................0 26 42 38 00 Mexico .......................................01 80 07 11 00 03
Argentina .....................................0 80 08 88 98 78
Australia..........................................13 00 66 53 66
* 0,12 Euro/min.
 right page (129) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Customer Care 129

Morocco ...............................................22 66 92 09
Netherlands .................................0 90 03 33 31 00
New Zealand...................................08 00 57 43 63
Nigeria ..............................................0 14 50 05 00
Norway.................................................22 70 84 00
Oman ....................................................... 79 10 12
Pakistan ..........................................02 15 66 22 00
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Hotline.fm

Paraguay ..........................................8 00 10 20 04
Philippines ........................................0 27 57 11 18
Poland.............................................08 01 30 00 30
Portugal ............................................8 08 20 15 21
Qatar....................................................04 32 20 10
Romania .........................................02 12 04 60 00
Russia..........................................8 80 02 00 10 10
Saudi Arabia .....................................0 22 26 00 43
Serbia .............................................01 13 07 00 80
Singapore ............................................62 27 11 18
Slovak Republic ..............................02 59 68 22 66
Slovenia ............................................0 14 74 63 36
South Africa ....................................08 60 10 11 57
Spain.................................................9 02 11 50 61
Sweden.............................................0 87 50 99 11
Switzerland .....................................08 48 21 20 00
Taiwan ............................................02 23 96 10 06
Thailand ............................................0 27 22 11 18
Tunisia .................................................71 86 19 02
Turkey..........................................0 21 65 79 71 00
Ukraine ........................................8 80 05 01 00 00
United Arab Emirates........................0 43 66 03 86
United Kingdom ...........................0 87 05 33 44 11
USA .............................................1 88 87 77 02 11
Vietnam...........................................84 89 30 01 21
Zimbabwe ............................................04 36 94 24
 left page (130) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)
VAR Language: en; VAR issue date: 040728

130 Care and maintenance

Care and maintenance

Your phone has been designed and • Do not drop, knock or shake your
manufactured to the highest of phone. Rough handling can dam-
standards and should be treated age internal circuit boards!

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Maintenance.fm

with great care. The suggestions • Do not use harsh chemicals, clean-
below will help you to enjoy your ing solvents, or strong detergents
phone for many years. to clean the phone!
• Protect your phone from moisture The suggestions given above apply
and humidity! Precipitation, equally to your phone, battery,
humidity and liquids contain min- charger and all accessories. If any of
erals that will corrode electronic these parts are not working properly,
circuits. Should your phone none- take them to your nearest qualified
theless become wet, disconnect it service outlet. The personnel there
immediately from any power sup- will assist you and, if necessary,
ply, remove the battery and leave repair the device.
the open phone to dry at room
temperature!
• Do not use or store the phone in
dusty, dirty areas. Its moving parts
may become damaged.
• Do not store your phone in hot
areas. High temperatures can
shorten the life of electronic
devices, damage batteries and
warp or melt certain plastics.
• Do not store your phone in cold
areas. When the phone warms up
again (to its normal ambient tem-
perature), moisture can form
inside the phone, which may dam-
age electronic circuit boards.
 right page (131) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)

VAR Language: en; VAR issue date: 040728

Product data 131

Product data Phone ID

You will need the following details if you
lose your phone or SIM card:
Declaration of conformity the number of the SIM card (on the card):
Siemens Information and Communication ..............................................................
mobile hereby declares that the phone
described in this user guide is in compliance 15 digit serial number of the phone
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Data.fm

with the essential requirements and other (under the battery):

relevant provisions of European Directive ..............................................................
1999/5/EC (R&TTE). The declaration of con- the customer service number of the service
formity (DoC) concerned has been signed. provider:
Please call the company hotline if you
require a copy of the original, or: ..............................................................
www.siemens-mobile.com/conformity
Lost phone
If you lose your phone or SIM card contact
your service provider immediately to pre-
vent misuse.
Technical data
GSM class: 4 (2 watt) Operating time
Frequency range: 880–960 MHz The operating time depends upon
the respective conditions of use:
GSM class: 1 (1 watt)
Extreme temperatures considerably
Frequency range: 1,710–1,880 MHz reduce the phone’s standby time.
GSM class: 1 (1 watt) Avoid placing the phone in the sun
or on a heater.
Frequency range: 1,850–1,990 MHz
Weight: 90 g Call time: 100 to 330 minutes
Standby time: 60 to 300 hours
Size: 101x46x18 mm
(78 ccm) Action taken Time Reduction of
(min) stand-by time by
Li-Ion battery: 750 mAh
Calling 1 30–90 minutes
Operating
temperature: –10 °C… +55 °C Light * 1 40 minutes
SIM card: 3.0 V Network search 1 5–10 minutes
The SAR value specified on p. 138 does not * Key input, games, organiser etc.
apply to phones equipped with "Emoty
CLIPit™ Cover“ (p. 72) or other CLIPit™
covers.
 left page (132) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)
VAR Language: en; VAR issue date: 040728

132 Quality

Quality
Battery quality statement Display quality declaration
The capacity of your mobile phone For technological reasons, a few
battery will reduce each time it is small dots with different colours

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Quality.fm

charged/emptied. Storage at too may appear in the display in
high or low temperatures will also exceptional cases.
result in a gradual capacity loss. As Just remember that the appearance
a result the operating time of your of brighter or darker dots generally
mobile phone may be considerably does not mean that a fault has
reduced, even after a full recharge of occurred.
the battery.
Regardless of this, the battery has
been designed and manufactured so
that it can be recharged and used for
six months after the purchase of
your mobile phone. After six
months, if the battery is clearly suf-
fering from loss of performance, we
recommend that you replace it.
Please buy only Siemens original
batteries.
 right page (133) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)

VAR Language: en; VAR issue date: 040728

Accessories 133

Accessories
Fashion & Carry Handsfree Portable
CLIPit™ Covers Headset Basic HHS-500
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Accessory.fm

Changeable top shells as well as keyboards Headset without keys; accepting and ending
area available in specialist shops. Alterna- calls is done using the phone.
tively, you can visit our online shop. Headset HHS-510
Carrying Cases Headset with key to accept and end calls.
A range of carry cases is available at spe-
cialist shops or you can visit the Siemens Headset Purestyle HHS-610
Mobile Store online: High quality headset with button for
accepting and ending calls. An ear hook
Original Siemens Accessories which can be adjusted for the left or the right
ear, makes it more comfortable to wear.
www.siemens-mobile.com/
shop USB DCA-510 data cable
For connecting the phone to the USB port of
the PC. With load function.
Energy
Li-Ion Battery (750 mAh) EBA-660 Office
Spare battery. Data Cable DCA-500
Travel Charger For connecting the phone to the serial
RS232 port of the PC.
Travel Charger EU ETC-500
Travel Charger UK ETC-510 USB DCA-510 data cable
Travel charger with an extended input volt- For connecting the phone to the USB port of
age range of 100–240 V. the PC. With load function.
Car Charger Plus ECC-600 Data Cable USB DCA-540
Charger for the cigarette lighter socket in For connecting the phone to the USB port of
the car. It is possible to make telephone calls the PC. With load function.
during charging. SyncStation DSC-600
Table support for the telephone to facilitate
simultaneous data exchange and telephone
charging. Contains a desktop stand and
a USB data cable.
 left page (134) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)
VAR Language: en; VAR issue date: 040728

134 Accessories

Multitainment Car Solutions

Emoty CLIPit Cover Mobile Holder HMH-680
This cover is used to "transfer" your Cradle without antenna port.
emotions to animated figures via the
integrated pressure, touch, and vibration Mobile Holder HMH-685

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Accessory.fm

sensors. The animations can then be sent as The cradle for connecting an external
normal MMS and received from any MMS antenna. Ideal for use with headset PTT or
compatible phone. car kit portable.
Plug-in Flash IFL-600 Can also be used as cradle for retrofitting
your handsfree car kit (series 55).
Plug-in flash module for taking photos in
areas with low ambient light. Car Kit Comfort HKC-680
Handsfree kit with first-class digital call qual-
ity and supreme ease of use. Includes all
components needed for installation. The
individual antenna solution is available in
specialist shops.
Car Kit Easy HKP-600
Facilitates convenient handsfree talking with
high call quality. With the integrated, rotating
cradle and the flexible microphone position-
ing, the telephone can be optimally adjusted
to suit any vehicle interior. The power is sup-
plied via the cigarette lighter socket.
Optional Car Kit accessories
Car Data Adapter HKO-690
Phone-In Adapter Cable HKO-570
Products can be obtained in specialist shops
or you can visit the Siemens Mobile Store
online:
Original Siemens Accessories
www.siemens-mobile.com/
shop
 right page (135) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)

VAR Language: en; VAR issue date: 040728

Guarantee certificate (UK) 135

Guarantee certificate (UK)

Without prejudice to any claim the user (cus- • This Guarantee shall apply to new devices
tomer) may have in relation to the dealer or purchased in the European Union. For
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Guarantee_eng.fm

retailer, the customer shall be granted a Products sold in the United Kingdom the
manufacturer's Guarantee under the condi- Guarantee is issued by Siemens plc,
tions set out below: Siemens House, Oldbury, Bracknell,
• In the case of new devices and their com- Berkshire, RG12 8FZ.
ponents exhibiting defects resulting from • Any other claims resulting out of or in con-
manufacturing and/or material faults within nection with the device shall be excluded
24 months of purchase, Siemens shall, at from this Guarantee. Nothing in this Guar-
its own option and free of charge, either antee shall attempt to limit or exclude a
replace the device with another device Customers Statutory Rights, nor the man-
reflecting the current state of the art, or ufacturer's liability for death or personal
repair the said device. In respect of parts injury resulting from its negligence.
subject to wear and tear (including but not • The duration of the Guarantee shall not be
limited to, batteries, keypads, casings, extended by services rendered under the
small parts on casings, protective cover- terms of the Guarantee.
ings where included in the scope of deliv- • Insofar as no Guarantee default exists,
ery), this warranty shall be valid for six Siemens reserves the right to charge the
months from the date of purchase. customer for replacement or repair.
• This Guarantee shall be invalid if the • The above provisions does not imply
device defect is attributable to improper a change in the burden of proof to the det-
treatment and/or failure to comply with riment of the customer.
information contained in the user manuals. To invoke this Guarantee, please contact the
• This Guarantee shall not apply to or Siemens telephone service. The relevant
extend to services performed by the number is to be found in the accompanying
authorised dealer or the customer them- user guide.
selves (e.g. installation, configuration,
software downloads). User manuals and
any software supplied on a separate data
medium shall be excluded from the Guar-
antee.
• The purchase receipt, together with the
date of purchase, shall be required as evi-
dence for invoking the Guarantee. Claims
under the Guarantee must be submitted
within two months of the Guarantee
default becoming evident.
• Ownership of devices or components
replaced by and returned to Siemens shall
vest in Siemens.
 left page (136) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)
VAR Language: en; VAR issue date: 040728

136 Guarantee certificate (IRL)

Guarantee certificate (IRL)

Without prejudice to any claim the user (cus- • Devices fitted with accessories not
tomer) may have in relation to the dealer or authorised by Siemens

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Guarantee_eng.fm

retailer, the customer shall be granted a • This Guarantee shall not apply to or extend
manufacturer’s Guarantee under the condi- to services performed by the authorised
tions set out below: dealer or the customer themselves (e.g.
• In the case of new devices and their com- installation, configuration, software down-
ponents exhibiting defects resulting from loads). User manuals and any software
manufacturing and/or material faults within supplied on a separate data medium shall
24 months of purchase, Siemens shall, at be excluded from the Guarantee.
its own option and free of charge, either • The purchase receipt, together with the
replace the device with another device date of purchase, shall be required as evi-
reflecting the current state of the art, or dence for invoking the Guarantee. Claims
repair the said device. In respect of parts under the Guarantee must be submitted
subject to wear and tear (including but not within two months of the Guarantee
limited to, batteries, keypads, casings, default becoming evident.
small parts on casings, protective cover- • Ownership of devices or components
ings where included in the scope of deliv- replaced by and returned to Siemens shall
ery), this warranty shall be valid for six vest in Siemens.
months from the date of purchase. • This Guarantee shall apply to new devices
• This Guarantee shall be invalid if the purchased in the European Union. For
device defect is attributable to improper Products sold in the Republic of Ireland the
care or use and/or failure to comply with Guarantee is issued by Siemens Ireland
information contained in the user manuals. Limited, Ballymoss Road, Sandyford
In particular claims under the Guarantee Industrial Estate, Dublin 18 - The Republic
cannot be made if: of Ireland.
• The device is opened (this is classed as • Any other claims resulting out of or in con-
third party intervention) nection with the device shall be excluded
• Repairs or other work done by persons from this Guarantee. Nothing in this Guar-
not authorised by Siemens. antee shall attempt to limit or exclude a
• Components on the printed circuit board Customers Statutory Rights, nor the man-
are manipulated ufacturer’s liability for death or personal
• The software is manipulated injury resulting from its negligence.
• Defects or damage caused by dropping, • The duration of the Guarantee shall not be
breaking, lightning or ingress of mois- extended by services rendered under the
ture. This also applies if defects or dam- terms of the Guarantee.
age was caused by mechanical, chemi-
cal, radio interference or thermal factors
(e.g.: microwave, sauna etc.)
 right page (137) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)

VAR Language: en; VAR issue date: 040728

Guarantee certificate (IRL) 137

• Insofar as no Guarantee default exists,

Siemens reserves the right to charge the
customer for replacement or repair.
• The above provisions does not imply a
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_Guarantee_eng.fm

change in the burden of proof to the detri-

ment of the customer.
To invoke this Guarantee, please contact the
Siemens helpdesk on 1850 777 277. This
number is also to be found in the accompa-
nying user guide.
 left page (138) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)
VAR Language: en; VAR issue date: 040728

138 SAR – European Union (RTTE)

SAR – European Union (RTTE)

INFORMATION ON RF EXPOSURE/ only the power required to reach the net-
SPECIFIC ABSORPTION RATE (SAR) work. In general, the closer you are to a base
THIS MOBILE PHONE MEETS THE LIMITS station, the lower the power output.
SET BY THE EU (1999/519/EC) FOR PRO- The highest SAR value for this model phone
TECTION OF THE HEALTH OF THE PUB- when tested for compliance against the
LIC FROM THE EFFECTS OF EXPOSURE norm is

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_SAR.fm

TO ELECTROMAGNETIC FIELDS 0.67 W/kg****
These limits are part of comprehensive rec- The SAR information can also be found on
ommendations for the protection of the pub- the Siemens web site at
lic. The recommendations were developed www.siemens-mobile.com
and confirmed by independent scientific While there may be differences between the
organisations through periodic and thorough SAR levels of various phones and at various
evaluation of scientific studies*. The limits positions, all Siemens products meet the
include a substantial safety margin designed legal requirements.
to assure the safety of all persons, regard-
less of age and health.
Before a radio equipment may be placed on * The World Health Organization (WHO,
CH-1211 Geneva 27, Switzerland)
the market, compliance with the European states that present scientific information
laws and the respective technical limit
requirements must be demonstrated. Only does not indicate the need for any spe-
cial precautions for use of mobile
then the CE mark may be affixed**. The limit phones.
for mobile phones recommended by the
Council of the European Union employs a Further information:
unit of measurement known as the Specific www.who.int/peh-emf
Absorption Rate, or SAR. This SAR limit is www.mmfai.org
2.0 W/kg***. This corresponds with the www.siemens-mobile.com
requirements of the International Commis- ** The CE mark confirms that the product is
sion for Non-Ionizing Radiation Protection in compliance with the legal require-
ICNIRP and was adopted into the European ments of the European Union as a pre-
Norm for Mobile Radio Equipment EN requisite for the placing on the market
50360. The SAR of mobile phones is deter- and the free movement of goods within
mined in accordance with the European the European internal market.
Norm EN 50361. This involves measuring *** averaged over 10 g body tissue.
the maximum value in all frequency bands of
the mobile phone with the phone transmit- **** SAR values may vary depending on
national requirements and frequency
ting at its highest power level. The actual bands. SAR information for different
SAR level of the phone during normal opera-
tion may be well below the maximum value. regions can be found at
www.siemens-mobile.com
This is because the phone is designed to
operate at multiple power levels so as to use
 right page (139) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)

VAR Language: en; VAR issue date: 040728

SAR – International (ICNIRP) 139

SAR – International (ICNIRP)

INFORMATION ON RF EXPOSURE/ The highest SAR value for this model phone
SPECIFIC ABSORPTION RATE (SAR) when tested for use at the ear is
THIS MOBILE PHONE MEETS THE LIMITS 0.67 W/kg***
FOR PROTECTION OF THE HEALTH OF SAR information can also be found at
THE PUBLIC FROM THE EFFECTS OF www.siemens-mobile.com
EXPOSURE TO ELECTROMAGNETIC
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_SAR.fm

While there may be differences between the

FIELDS SAR levels of various phones and at various
Your mobile phone is a radio transmitter and positions, they all meet the international
receiver. It is designed and manufactured guidelines for safe RF exposure.
not to exceed the limits for exposure to radio
frequency (RF) energy recommended by
* The World Health Organization (WHO,
international guidelines from the Interna- CH-1211 Geneva 27, Switzerland)
tional Commission on Non-Ionizing Radia-
tion Protection (ICNIRP). These limits are states that present scientific information
does not indicate the need for any spe-
part of comprehensive guidelines for the pro- cial precautions for use of mobile
tection of the public and establish permitted
levels of RF energy for the population. The phones.
guidelines were confirmed by independent Further information:
scientific organisations through periodic and www.who.int/peh-emf
thorough evaluation of scientific studies*. www.mmfai.org
The limits include a substantial safety mar- www.siemens-mobile.com
gin designed to assure the safety of all per- ** averaged over 10 g of tissue.
sons, regardless of age and health. *** SAR values may vary depending on
The exposure limit for mobile phones national requirements and frequency
employs a unit of measurement known as bands. information for different regions
the Specific Absorption Rate, or SAR. The can be found at
SAR limit stated in the international guide- www.siemens-mobile.com
lines is 2.0 W/kg**. Tests for SAR are con-
ducted in all frequency bands using standard
operating positions with the phone transmit-
ting at its highest power level. The actual
SAR level of the phone during operation can
be well below the maximum value. This is
because the phone is designed to operate at
multiple power levels so as to use only the
power required to reach the network. In gen-
eral, the closer you are to a base station, the
lower the power output.
 left page (140) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)
VAR Language: en; VAR issue date: 040728

140 Menu tree

Menu tree
Default book > Show entries
<New entry>
Business card

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_MenuTree.fm

Groups
Default book
<Info numbers>

Call records > Calls missed

Calls received
Calls dialled
Delete records
Durat/charges > All calls
All incom.calls
All outgoing
Remain. units
Charge sett. > Currency
Personal rate
Surf & fun > URL/service provider Account limit
Games Auto display
Applications
Downl. assist.
Bookmarks
Emoty
Internet
Camera

Messages > Create new > SMS text

MMS
E-mail
Inst. message
 right page (141) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)

VAR Language: en; VAR issue date: 040728

Menu tree 141

Messages > Inbox > SMS

MMS
E-mail
WAP push
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_MenuTree.fm

Retr. e-mail
Send/rec. mail
CB services

Draft > SMS

MMS
E-mail

Unsent > SMS

MMS
E-mail
Retr. e-mail
Send/rec. mail

Sentbox > SMS

MMS
E-mail
MMS templates
SMS archive
Text modules
Message setup > Text zoom
SMS > SMS profiles
SMS signature

MMS > MMS profile:

User settings
Help
 left page (142) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)
VAR Language: en; VAR issue date: 040728

142 Menu tree

Messages > Message setup > E-mail > Accounts

WAP push set. General sett.
Voice message Help
CB services
Organiser > Calendar

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_MenuTree.fm

Appointments
Tasks
Notes
Missed appts.
Dictat.machine
Time zones
Calendar setup

Extras > SIM services

Walky Talky
Alarm clock
Sound recorder
Calculator
Unit converter
Stopwatch
Countdown
Device manag.
Remote syncr.
My stuff
Setup > Profiles
Themes
Display > Language
Text input > T9 preferred
Wallpaper Input language
Logo
Colour skin
Screensaver
Start up anim.
Shutdn anim.
 right page (143) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)

VAR Language: en; VAR issue date: 040728

Menu tree 143

Setup > Display > Own greeting

Big letters
Illumination
Dynamic light
> Ringer setting
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_MenuTree.fm

Ringtones
Silent alert
Volume > Incoming call
Walky Talky
Messages
CB services
Alarm clock
d Calls Organiser
Group calls System
Other calls
Walky Talky
More melodies > Messages
Alarm clock
Organiser
Startup melody
Shutdown mel.
Phone Pilot Sound recorder

Call setup > Hide ID

Call waiting
Divert > All calls
Call screening Not reachable
Any key answ. No reply
Minute beep Busy
Receiving fax
Receiving data
Status check
Clear all
 left page (144) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)
VAR Language: en; VAR issue date: 040728

144 Menu tree

Setup > Phone setup > Key tones

Info tones
Automatic switch off
Phone identity
Memory assis.

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_MenuTree.fm

File system > Format
Master reset Clean up

Clock > Time/date

Time zones
Date format
Time format
Buddhist year
Show clock
Auto time zone

Connectivity > GPRS

GPRS info
IrDA
Data services
HTTP profile
Authentication
Fax/data > Send voice/fax
Rec. voice/fax
Security > Auto key lock Rec fax/data
Direct call
Only ‚
Codes > PIN control
This SIM only Change PIN
Change PIN2
Chg.phonecode
 right page (145) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:18)

VAR Language: en; VAR issue date: 040728

Menu tree 145

Setup > Security > Barrings > All outgoing

Outgoing intl.
Out.int.x.home
All incoming
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_MenuTree.fm

When roaming
Status check
Clear all

Network > Line > Select line

Network info Protected
Choose netwrk
Auto network
Pref. network
Band selection
Fast search
User group > Active
Select group
All outgoing
Pref. group

Accessories > Car Kit > Auto answer

Automatic switch off
Car loudspk.
Key assignm.
Headset > Auto answer
 left page (146) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:39)
VAR Language: en; VAR issue date: 040728

146 Index

Index
A Browser ...................................... 71
Accessories............................... 133 Buddh. Date................................ 88
Additional books......................... 37 Business card .............................. 30
Addressbook Busy number............................... 24
Dial entry................................ 33 C
Groups ................................... 34 Calculator ................................. 114

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_SIX.fm

New entry............................... 31 Calendar ................................... 101
Read entry .............................. 33 Call
Aircraft mode ............................. 76 Accept/end.............................. 25
Alarm Barring.................................... 94
Alarm clock........................... 112 Charges................................... 39
Type ..................................... 103 Conference ............................. 26
Alarm clock .............................. 112 Divert...................................... 84
All calls (call time/charge) ........... 39 End ......................................... 23
All calls (diversion) ..................... 85 Hold........................................ 25
All incoming (barrings) ............... 94 Menu ...................................... 27
Answering service (external)....... 68 Reject...................................... 25
Any to answer ............................ 85 Swap (change) ........................ 25
Appointments .......................... 102 Call back ..................................... 24
Authentication ........................... 92 Call divert ................................... 84
Auto display Call transfer ................................ 27
Clock ...................................... 88 Call waiting........................... 26, 84
Duration/charges .................... 39 Calling ........................................ 23
Auto key lock.............................. 93 Calls dialled (call list)................... 38
Auto time zone................... 88, 106 Calls received (call list) ................ 38
Auto. Network selection ............. 95 Camera....................................... 40
Auto. redial ................................ 24 Car Kit
Automobile accessories ............ 134 Accessories ........................... 134
B Setting .................................... 97
Band selection ............................ 96 Car kit accessories ..................... 134
Battery Care of phone ........................... 130
Charge.................................... 10 Cell Broadcast (CB) ...................... 69
Insert........................................ 9 Central input............................... 42
Operating time ............... 10, 131 Change faceplate ........................ 11
quality declaration ................ 132 Change keypad mat .................... 11
Big letters................................... 80 Charge rate................................. 39
Bookmarks (WAP) ................. 70, 72 Charges ...................................... 39
 right page (147) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:39)

VAR Language: en; VAR issue date: 040728

Index 147

Charging the battery................... 10 E

Clock.......................................... 88 E-mail
Codes......................................... 17 Lists ........................................ 58
Colour scheme ........................... 79 Receive/read............................ 58
Conference................................. 26 Settings .................................. 59
Connection profiles .................... 90 Write....................................... 57
Contact list ................................. 62 Emergency number..................... 12
Control code (DTMF) .................. 28
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_SIX.fm

Emoty......................................... 72
Countdown .............................. 116 Extras ............................... 107, 130
Credit limit ................................. 39
CSD settings ............................... 90 F
D Factory settings .......................... 87
Fast access.................................. 99
Data connection ......................... 89 Fast search.................................. 96
Date format................................ 88 Fax/data mode ............................ 91
Default book .............................. 30 Filter........................................... 85
Device manag........................... 118 Formatting (SMS text)................. 43
Dialling code .............................. 23 Formatting
Dialling with number keys .......... 23 (telephone memory).................... 87
Dictating machine .................... 105 Forwarding (call)......................... 27
Digital rights management ......... 13 Frequency range ......................... 96
Direct call ................................... 27
G
Direct reply (SMS)....................... 47
Display Games and applications .............. 73
Illumination ............................ 80 GPRS........................................... 89
Language ............................... 79 Groups........................................ 34
Symbols.................................... 7 H
Divert ......................................... 84 Handset volume.......................... 23
Download .................................. 73 Handsfree talking........................ 25
DTMF tones Headset
(tone sequences)........................ 28 Accessories ........................... 133
Duration/charges ........................ 39 Setting .................................... 97
Dynamic Light ............................ 78 Hide ID ....................................... 84
Highlighting mode ...................... 16
Hold call ............................... 25, 27
Home network............................ 95
Hotline ..................................... 128
 left page (148) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:39)
VAR Language: en; VAR issue date: 040728

148 Index

I Message memory full. ................. 48

Identity number (IMEI)................ 86 Message type.............................. 47
IMEI number............................... 86 Microphone on/off ................ 27, 41
Inbox.......................................... 53 Minute beep ............................... 85
Info tones................................... 86 Missed appointments ................ 104
Information services (CB)............ 69 Missed calls (call list)................... 38
Infrared ...................................... 89 MMS
Infrared (IrDA) ............................ 89 Lists ........................................ 54

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_SIX.fm

Input language (T9).................... 20 Receive ................................... 53
Inst. Message ............................. 61 Send ....................................... 52
International dialling code .......... 24 Write....................................... 49
Internet...................................... 70 Mobile Phone Manager ............. 123
Muting (microphone)............ 27, 41
K My menu .................................... 98
Kamera ...................................... 40 My phone ................................... 29
Key tones ................................... 86 N
L
Network
Language ................................... 79 Barring.................................... 94
Limit (call time/charge) ............... 39 Connection ............................. 95
Logo........................................... 79 Settings .................................. 95
Loss of phone, SIM card ............ 131 Notes........................................ 104
M O
Mailbox ...................................... 68 Only ‚ ..................................... 93
Maintenance of phone.............. 130 Only this SIM .............................. 93
Media Player............................. 120 Operating times
Menu (battery) ............................. 10, 131
Controls.................................. 14 Organiser.................................. 101
My menu ................................ 98 Own (phone) numbers................ 37
Speed dialling ......................... 17 Own greeting.............................. 80
Menu speed dialling ................... 16 P
Menu tree ................................ 140
Message PC connection............................. 18
CB .......................................... 69 Phone (settings).......................... 86
E-mail ..................................... 57 Phone code................................. 17
MMS....................................... 49 Phone data ............................... 131
SMS.................................. 43, 45 Phone identity number (IMEI)...... 86
Phone number
transmission on/off ..................... 84
Phone Pilot ................................. 83
 right page (149) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:39)

VAR Language: en; VAR issue date: 040728

Index 149

Phonebook S
Additional books..................... 37 Safety precautions ........................ 3
call an entry............................ 36 Screensaver ................................ 79
New entry............................... 35 Second phone number................ 95
Protected SIM ......................... 37 Security ...................................... 17
VIP numbers ........................... 37 Service centre (SMS) ................... 47
Pictures & sounds (SMS) ............. 44 Service supplier portal................. 29
PIN
Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_SIX.fm

Service tones .............................. 86

Change................................... 17 Set time/date .............................. 88
Control ................................... 17 Settings ...................................... 75
Enter ...................................... 12 Short message (SMS) .................. 43
Error ..................................... 127 Shown in the display ..................... 7
PIN2 ........................................... 17 Shut down animation.................. 80
POP3 .......................................... 60 Siemens City Portal ..................... 29
Preferred network....................... 95 Signal strength ........................... 13
Preventing accidental Silent alert .................................. 81
activation ................................... 18 SIM card
Product data............................. 131 Clear barring ........................... 18
Profiles Insert ........................................ 9
MMS....................................... 55 Problems............................... 126
Phone..................................... 75 SIM services (optional) ...... 111, 112
SMS........................................ 47 SMS
WAP ....................................... 71 Archive ................................... 46
Prompt ....................................... 24 Lists ........................................ 46
Provider logo .............................. 79 Profiles.................................... 47
PUK, PUK2 .................................. 17 Read ....................................... 45
Q Settings .................................. 47
Questions & Answers................ 125 Signature ................................ 47
T9 input .................................. 20
R
To group ................................. 44
Records ...................................... 38 Write....................................... 43
Redial ......................................... 23 SMTP .......................................... 60
Reminder ................................... 24 SOS ............................................ 12
Remote synchronisation ........... 117 Sound recorder ......................... 113
Ringtone setting ......................... 81 Special characters ....................... 19
Ringtones ........................34, 81, 83 Speech time (battery) ............... 131
Speed dialling keys.................... 100
 left page (150) of CX70 Retail fug en, A31008-H7103-A1-1-7619 (10.09.2004, 12:39)
VAR Language: en; VAR issue date: 040728

150 Index

Standard functions ..................... 15 V

Standby mode ............................ 14 Validity, SMS............................... 47
Standby time ...................... 10, 131 Voice message (mailbox) ............ 68
Start up animation...................... 80 Volume
Stopwatch................................ 116 Handset volume ...................... 23
Storage location Profiles.................................... 75
(Phonebook) .............................. 35 Ringtone ................................. 81
Surf & fun................................... 70
W

Siemens AG 2003, C:\Siemens\Produkte\CX70\output\FUG\CX70_FUG_en_040910_rs_pk_druck\ULYR_SIX.fm

Swap.......................................... 25
Switch off phone Walky Talky......................... 82, 107
Automatic............................... 86 Wallpaper (display) ..................... 79
Manually ................................ 12 WAP............................................ 70
Switch on phone ........................ 12 WAP push ................................... 42
Symbols ....................................... 7
Synchronisation........................ 117
T
T9 text entry............................... 20
Tasks........................................ 103
Technical data .......................... 131
Text entry
With T9................................... 20
Without T9 ............................. 19
Text module ............................... 20
Time zones....................12, 88, 106
Topics ........................................ 77
U
Unanswered ............................... 84
Unit converter .......................... 115
Upper and lowercase letters........ 19
User group ................................. 96