For customers in Europe Audio CD  The audio formats supported by this unit are as follows:

4-562-022-12(1) (Total number of tracks and total playing time Listening to music on a USB device  MP3: file extension “.mp3” Presetting stations to FAVORITE
Notice for customers: the following  WMA: file extension “.wma”
appear in order.)
 AAC: file extension “.m4a,” “.3gp” and “.mp4”
RADIO STATIONS
information is only applicable to You can listen to audio files stored on a USB device
Note that even if the file name has the correct file
equipment sold in countries applying EU (a digital music player or USB storage media). You can preset up to three favorite stations to
extension but the actual file was created in a different
Audio files in MP3, WMA and AAC formats* can be FAVORITE RADIO STATIONS (1-3) buttons. Assign one
directives audio format, this unit may produce noise or may
played on this unit. malfunction. FM or AM program for each button.
This product has been manufactured by or on behalf
Total number of tracks * Files with copyright protection (Digital Rights  MP3 PRO format is not supported.
of Sony Corporation, 1-7-1 Konan Minato‑ku Tokyo,
Management) cannot be played on this unit.  WMA files encoded in WMA DRM, WMA Lossless and
1 Press FM/AM  repeatedly to turn on the
108-0075 Japan. Inquiries related to product

Personal Audio System radio function and select the band “FM” or
WMA PRO formats cannot be played back.
compliance based on European Union legislation
Compatible USB devices  AAC files encoded in copyright-protected AAC format “AM.”
shall be addressed to the authorized representative, cannot be played back.
Sony Deutschland GmbH, Hedelfinger Strasse 61, Compatibility requirements for the USB devices are 2 Tune to the station you want to preset.
 This unit supports the AAC-LC (AAC Low Complexity)
Operating Instructions 70327 Stuttgart, Germany. For any service or as follows. Before using a device with this unit, profile. 3 Press and hold the desired FAVORITE RADIO
guarantee matters, please refer to the addresses check that it meets the requirements.
 This unit cannot play audio files on a USB device in the STATIONS (–SET) (1-3) button  until you hear
provided in the separate service or guarantee Total playing time following cases:
 Compliance with USB 2.0 (Full Speed) a beep.
documents.  When the total number of audio files in a single folder
MP3/WMA disc  Supports Mass Storage mode* The tuned station is preset to the selected button
exceeds 999.
Disposal of waste batteries and electrical * Mass Storage mode is a mode that allows a USB device to  When the total number of audio files on a single USB of FAVORITE RADIO STATIONS (1-3) and the same
and electronic equipment (applicable in become accessible to a host device, enabling file device exceeds 5,000. number as that of the button will light up on the
transfers. Most USB devices support Mass Storage mode.  When the total number of folders on a single USB display.
the European Union and other European
device exceeds 256 (including the “ROOT” folder).
countries with separate collection  When the directory level (folder depths) exceeds 8 (Example: Presetting FM 87.50 MHz to number )
systems) Total number Total number
1 Connect the USB device to the  (USB) port . (including the “ROOT” folder).
This symbol on the product, the battery of folders*1 of files 2 Press USB  to turn on the USB function. These numbers may vary depending on the file and folder
structure.
©2014 Sony Corporation Printed in China or on the packaging indicates that the
product and the battery shall not be  Compatibility with all encoding/writing software is not
3 Press   to start playback. guaranteed. If audio files on the USB device were
treated as household waste. On certain
originally encoded with incompatible software, those files
batteries this symbol might be used in
ZS-PS50 combination with a chemical symbol.
may produce noise or interrupted sound, or may not be

Total number of folders

played back at all. To change the preset station
The chemical symbols for mercury (Hg) or lead (Pb) Repeat steps 1 to 3.
are added if the battery contains more than The preset station on the button will be replaced by
0.0005% mercury or 0.004% lead. By ensuring these 3 Press   to start playback.
products and batteries are disposed of correctly, you
Playing time*2, 3
Listening to the radio the new one.
will help prevent potentially negative consequences *1 If MP3/WMA files are present only in the root directory,
Do not install the appliance in a confined space,
for the environment and human health which could “001” appears on the display. 1 Press FM/AM  repeatedly to turn on the Listening to preset stations with
WARNING such as a bookcase or built-in cabinet.
otherwise be caused by inappropriate waste
handling. The recycling of the materials will help to
*2 If the playing time is longer than 100 minutes, “--:--”
appears on the display.
radio function and select the “FM” or “AM” FAVORITE RADIO STATIONS
conserve natural resources.
band.
Excessive sound pressure from earphones and *3 By pressing DISPLAY , playback screen changes Playing time*1, 2
To reduce the risk of fire or electric shock, do not headphones can cause hearing loss. In case of products that for safety, performance or between showing the playing time, the function name, 2 Hold down TUNE + or   until the frequency Press the desired FAVORITE RADIO STATIONS (1-3)
expose this apparatus to rain or moisture. data integrity reasons require a permanent and the current track number (or showing the current digits begin to change on the display. button .
*1 If the playing time is longer than 100 minutes, “--:--”
Do not expose the batteries (battery pack or folder and file number).
connection with an incorporated battery, this battery appears on the display. The unit automatically scans the radio Note
To reduce the risk of fire, do not cover the ventilation batteries installed) to excessive heat such as
should be replaced by qualified service staff only. To *2 By pressing DISPLAY , playback screen changes frequencies and stops when it finds a clear To prevent the preset from being changed by mistake, do
opening of the appliance with newspapers, sunshine, fire or the like for a long time. Other operations
ensure that the battery and the electrical and between showing the playing time, the function name, station. not hold down the button. If doing so, the preset on the
tablecloths, curtains, etc. Do not expose the The nameplate is located on the bottom exterior. electronic equipment will be treated properly, hand To Do this and the current folder and file number. button will be replaced by the currently tuned station.
If you cannot tune to a station using automatic
appliance to naked flame sources (for example, over these products at end-of-life to the applicable Pause playback Press  . To return to Other operations tuning mode, press TUNE + or   repeatedly to
lighted candles). collection point for the recycling of electrical and playback, press the button change the frequency step by step.
To reduce the risk of fire or electric shock, do not electronic equipment. For all other batteries, please To Do this
again. When an FM stereo broadcast is received, “ST”
expose this apparatus to dripping or splashing, and view the section on how to remove the battery from Pause playback Press  . To return to
Stop playback Press  . When you press  lights up on the display.
do not place objects filled with liquids, such as the product safely. Hand the battery over to the playback, press the button
vases, on the apparatus. applicable collection point for the recycling of waste  after playback is stopped, Note
again*.
batteries. For more detailed information about playback starts from the point The unit of frequency of tuned stations is MHz for the FM
As the main plug is used to disconnect the unit from where you stopped playback Stop playback Press  . When you press 
recycling of this product or battery, please contact band and kHz for the AM band.
the mains, connect the unit to an easily accessible (Resume Play).  after playback is stopped,
your local Civic Office, your household waste
AC outlet. Should you notice an abnormality in the playback starts from the point To change the FM/AM tuning interval
disposal service or the shop where you purchased Select a folder Press + or  .
unit, disconnect the main plug from the AC outlet where you stopped playback (This function is only available on models for some
the product or battery. on an MP3/WMA
immediately. (Resume Play). countries/regions. See the radio section in
disc
The unit is not disconnected from the AC power “Specifications.”)
Personal Audio System is designed to be used Select a folder Press + or  .
source (mains) as long as it is connected to the wall Select a track/ Press  or  . You can The FM/AM tuning interval can be changed if
for playing back music sources on CDs or USB
outlet, even if the unit itself has been turned off. file skip tracks/files one by one. Select a file Press  or  . You can necessary using the following procedure.
devices and listening to radio stations.
skip files one by one.
Find a point in a Hold down  or   1 Press FM/AM  repeatedly to select a band.
To skip files continuously, hold
track/file during playback, and release the
button at the desired point.
down  or   and 2 Hold down ENTER  until “FM-xx” or “AM-xx”
release the button at the desired flashes on the display.
When locating a point while
file.
paused, press   to start 3 Hold down FM/AM  until the current tuning
playback after the desired point Find a point in a Hold down  or   step appears.
is found. file during playback, and release the
Power Sources Basic Operations button at the desired point.
4 Press  or   to select the desired
When locating a point while tuning step.
Tip
Connect the AC power cord , or insert six R14 (size C) batteries (not supplied) into the battery compartment . To cancel the Resume Play, press   while the CD is paused, press   to start “FM 50K” (for 50 kHz interval) or “FM 100K” (for
stopped. playback after the desired point 100 kHz interval) in the FM band, and “AM 9K” (for
is found. 9 kHz interval) or “AM 10K” (for 10 kHz interval) in
Note the AM band can be selected.
Resume Play is cancelled in the following cases: * When playing a VBR MP3/WMA/AAC file, playback may 5 Press ENTER .
 When you open the CD compartment. restart from a different point.
 When you turn off the power. Changing the tuning interval erases all the FM/AM
Note preset stations stored in the unit. Reset your preset
To a wall outlet Example of folder structure and playing order When removing a USB device, hold down   until
stations after changing the tuning interval.
The playing order of the folders and files is as “no DEV” appears, and then turn off the unit or switch to
other functions beforehand. Removing the USB device
To AC IN follows. However, the playing order may differ from To improve radio reception
without performing these steps may corrupt the data on the
AC power cord (supplied) the original order on the disc, depending on the USB device or damage the device itself. Use the radio in a place where
recording method used. radio signals can be easily
Example of folder structure and playing order received such as near a window.
Folder The playing order of the folders and files is as Also, adjust the antenna (FM) or
MP3/WMA file follows. However, the playing order may differ from reorient the unit itself (AM) for
Rear
the original order on the USB device, depending on good reception.
the recording method used.
Adjust the antenna to
USB device
Folder improve FM reception. If the
MP3/WMA/AAC file stereo FM reception is noisy,
press FM MODE  repeatedly
until “Mono” appears on the
display. You will lose the
stereo effect, but the
reception will be improved.

*   and VOL +  have a tactile dot. Reorient the unit

itself to improve AM
Notes reception. (A ferrite
bar antenna is built
 When using the radio on batteries and the battery power drops to a certain level, the OPR/BATT indicator  dims or power of
the radio may go off during playback. If this happens, replace all the batteries with new ones. Even after the OPR/BATT indicator Before using the unit Playing a music disc in the unit.)
 becomes dim, you can use the radio function for some time, although you cannot use the CD player. Before you replace the
batteries, be sure to remove any CD and disconnect any USB devices or optional components from the unit. Notes on MP3/WMA discs
To turn the power on or off 1 Press CD  to turn on the CD function.
 When a disc is loaded, the unit reads all the files on that
If the reception problem still persists, try changing
 To use the unit on batteries, disconnect the AC power cord from the unit and the wall outlet.
 In standby mode with the AC power cord connected, “STANDBY” lights up on the display. Press OPERATE . You can also turn on the power 2 Press PUSH OPEN/CLOSE  , place a disc in disc. During this time, “READ” is flashing. If there are many the installation location.
the CD compartment and then close the folders or non-MP3/WMA files on the disc, it may take a Avoid places such as the following:
of this unit using the direct power-on function
long time for play to begin or for the next MP3/WMA file
(below). compartment cover.
To use the power-management function (European models only) to start to play.
Notes on the USB device
In this manual, operations are mainly explained
This unit is equipped with an automatic standby function. With this function, the unit enters standby mode  We recommend that non-MP3/WMA files or unnecessary
using the direct power-on function.  It may take a long time before playback starts when:
automatically after about 15 minutes if there is no operation or audio signal output. folders are excluded when creating MP3/WMA discs.
 the folder structure is complex.
To turn standby mode on or off, press VOL   while holding down TUNE + . Each time you press the buttons,  During playback, audio files other than MP3 and WMA  the USB device is close to capacity.
“STANDBY” flashes for 2 seconds and “ON” or “OFF” appears on the display. To use the direct power-on function Label side up files are skipped even if those files are included in a folder.
 When a USB device is connected, the unit reads all the Between
Press CD , USB , FM/AM , AUDIO IN  or  The audio formats supported by this unit are as follows: files on the device. If there are many folders or files on the
Notes FAVORITE RADIO STATIONS (1-3)  while the unit is  MP3: File extension “.mp3” buildings
device, it may take a long time for the unit to finish
 The displayed content starts flashing on the display about 2 minutes before entering standby mode. turned off. The power turns on with the relevant  WMA: File extension “.wma” reading them.
 The automatic standby function is not available with the FM/AM function. function selected. Note that even if the file name has the correct file  Do not connect a USB device to the unit through a USB
extension but the actual file was created in a different hub. Nearby
audio format, this unit may produce noise or may mobile
To adjust the volume malfunction.
 With some connected USB devices, after an operation is
Press VOL + or  . The disc is loaded and the disc information performed, there may be a delay before it is performed by phones,
 MP3 PRO format is not supported. this unit. electrical
appears on the display.
 WMA files encoded in WMA DRM, WMA Lossless and  This unit may not support all the functions provided with appliances
To listen through headphones WMA PRO formats cannot be played back. a connected USB device.
Connect headphones to the  (headphones) jack  This unit cannot play audio files on a disc in the following  Do not save non-MP3/WMA/AAC files or unnecessary
. cases: folders to a USB device that contains MP3/WMA/AAC files. On steel desks
 When the total number of audio files exceeds 999.
 During playback, audio files other than MP3, WMA and or tables
 When the total number of folders on a single disc AAC files are skipped even if those files are included in a
exceeds 256 (including the “ROOT” folder). folder.
 When the directory level (folder depths) exceeds 8
(including the “ROOT” folder).
 Creating your own program (Program “Err01” appears.
Other Operations Play) Listening to preset radio stations Precautions Troubleshooting  An unsupported USB device is connected and Specifications License and Trademark Notice
You can arrange the playing order of up to 25 playback or pause operation is performed.
tracks/files on a disc/USB device. 1 Press FM/AM  repeatedly to turn on the CD player section  MPEG Layer-3 audio coding technology and
Discs that this unit CAN play “Err02” appears and the unit turns off
Selecting play mode 1 Press CD  or USB  to turn on the CD or radio function and select the “FM” or “AM”
 Audio CD (CD-DA*1 tracks)
General
automatically.
System
Compact disc digital audio system
patents licensed from Fraunhofer IIS and
Thomson.
USB function. band.
 CD-R/CD-RW that contains MP3/WMA files and is The power does not turn on.  An abnormal level has been detected in the Laser diode properties  Windows Media is either a registered trademark
You can set the unit to play tracks or files repeatedly 2 Press PLAY MODE  repeatedly until “PGM” 2 Press PRESET + or   to select a stored
finalized*2 correctly. electrical current from the  (USB) port . In this Emission duration: Continuous or trademark of Microsoft Corporation in the
or in random order while a disc/USB device is  Make sure the AC power cord is connected to the
appears on the display. preset number for the desired radio station. case, remove the USB device from the  (USB) port Laser output: Less than 44.6 μW United States and/or other countries.
stopped. *1 CD-DA is the abbreviation for Compact Disc Digital Audio. wall outlet securely.
 and reconnect the USB device, and then turn (This output is the value measurement at a distance of
3 Press  or   to select a track/file. Tip It is a recording standard used for audio CDs.  Make sure the connector of AC power cord is on the unit again. If this problem persists after 200 mm from the objective lens surface on the optical  This product is protected by certain intellectual
Press PLAY MODE  repeatedly. When you want to specify a folder that contains By repeatedly pressing DISPLAY  while listening to the *2 Finalizing is the process to make the CD-R/CD-RW discs inserted into the AC IN jack securely. pick-up block with 7 mm aperture.) property rights of Microsoft Corporation. Use or
turning on the power of the unit, contact your
MP3/WMA/AAC files, press + or   first to radio, the radio information changes between showing the playable on the consumer disc player products, and the Check if the batteries are inserted correctly, Number of channels distribution of such technology outside of this
preset number and the frequency.
 nearest Sony dealer.
select a folder, and then press  or   to finalizing can be enabled or disabled as optional settings
matching the polarities. 2 product is prohibited without a license from
The preset number display automatically returns to the during disc creation in most recording software. Microsoft or an authorized Microsoft subsidiary.
select a file. Replace all the batteries with new ones when the There is no sound. Frequency response
frequency display after 2 seconds have elapsed.  20 Hz  20,000 Hz +1/–2 dB
4 Press ENTER . Discs that this unit CANNOT play OPR/BATT indicator  dims.  The USB device may be connected incorrectly.
 Other trademarks and trade names are those of
Each time you press the button, the indication The track/file is programmed and the program
 CD-R/CD-RW other than those recorded in audio
Turn off the unit and reconnect the USB device.
Wow and flutter
Below measurable limit
their respective owners. In this manual, ™ and
marks are not specified.
®
step number appears. There is no sound. Then turn on the unit.
changes as follows: Using the Sleep Timer CD format or formats conforming to ISO 9660
Level 1/Level 2 or Joliet  Make sure the appropriate function is selected for Radio section
(Example: audio CD) Frequency range
 Normal play (None) the music or sound source you want to listen to. There is noise, skipping, or distorted sound.
You can set the unit to turn off automatically after a  CD-R/CD-RW of poor recording quality, CD-R/ Models for Europe, Australia, New Zealand, Korea, Taiwan,
 CD-RW with scratches or that is dirty, or CD-R/  Unplug the headphones when listening through  Turn off the unit and reconnect the USB device. Kuwait, Saudi Arabia, UAE, Kenya, Mauritius, Nigeria,
set time has elapsed. speakers. Then turn on the unit again. Tanzania, and Uganda
Single repeat ( 1) CD-RW recorded using an incompatible recording
FM: 87.5 MHz  108 MHz (50 kHz step)
 1 Press SLEEP . device  The music data itself contains noise, or the sound AM: 531 kHz  1,602 kHz (9 kHz step)
The sound is noisy. is distorted. Noise may have entered during the
All repeat ( ) The default setting (“90”) appears and the  CD-R/CD-RW that is unfinalized or finalized Models for Bolivia, Chile, Paraguay, Peru, and Uruguay
Step number “SLEEP” indicator lights up on the display. incorrectly  Is someone using a mobile phone or other creation of audio files. Try re‑creating audio files
FM: 87.5 MHz  108 MHz (100 kHz step)
 equipment emitting radio waves near the unit? If and use them to play on this unit. 87.5 MHz  108 MHz (50 kHz step)
Selected folder play ( )* 2 Press SLEEP  repeatedly to select the so, move the unit away from such devices.
5 Repeat steps 3 and 4 to program additional Notes on discs AM: 530 kHz  1,610 kHz (10 kHz step)
 desired setting. The USB device cannot be connected to the 531 kHz  1,602 kHz (9 kHz step)
tracks/files.  Clean the CD with a cleaning cloth if
Selected folder repeat play ( , )* A small humming noise is heard from the  (USB) port . Models for Indonesia, Malaysia, Philippines, Singapore,
6 Press   to start Program Play. the disc is dirty. Wipe the disc from
radio. Pakistan, Bahrain, Iran, Jordan, Lebanon, Oman, Qatar,
 the center out. If there are scratches,  The connector on the USB device or the USB cable
To play the same program again, press  . Yemen, Angola, Cameroon, Cote d’Ivoire, Egypt, Ethiopia,
dirt or fingerprints on the disc, a  This is not a malfunction. You may hear a small is being inserted backwards. Insert it to the
Ghana, Libya, Madagascar, Morocco, Mozambique,
Shuffle play ( ) Note that the created program is cleared in the tracking error may occur. humming noise from the radio depending on the  (USB) port  in the correct direction. Senegal, Sudan, Zambia, and Zimbabwe
 following cases: status of the power supply. FM: 87.5 MHz  108 MHz (50 kHz step)
Each time you press the button, the duration (in  Do not use solvents such as
Program play (PGM)  When you open the CD compartment. benzine, thinner, commercially “READ” is displayed for an extended time, 87.5 MHz  108 MHz (100 kHz step)
minutes) changes on the display, and the “notUSE” appears. or it takes a long time before playback AM: 531 kHz  1,602 kHz (9 kHz step)
 When you connect another USB device. available cleaners or anti-static 530 kHz  1,610 kHz (10 kHz step)
  When you turn off the power of the unit in the
selected setting is confirmed automatically after  You pressed an invalid button. starts.
spray intended for vinyl LPs.
Program repeat play ( , PGM) about 4 seconds. Other models
CD function.  Do not expose the CD to direct sunlight or heat  The reading process can take a long time in the FM: 87.5 MHz  108 MHz (100 kHz step)
Tip sources such as hot air ducts, or leave it in a car CD/MP3/WMA player following cases: AM: 530 kHz  1,710 kHz (10 kHz step)
* These functions are available only when playing MP3/ Note  There are many folders or files on the USB
You can check the time left until the unit turns off by parked in direct sunlight as there can be a Intermediate frequency
WMA files on an MP3/WMA disc or MP3/WMA/AAC files If you try to program 26 tracks/files or more, “FULL” flashes
on the display.
pressing SLEEP  again after setting the sleep timer. considerable rise in temperature inside the car. The CD player does not play even when a device. FM: 128 kHz
on a USB device.
 Do not stick paper or a sticker on the CD, or CD is in place.  The file structure is complex. AM: 45 kHz

To display programmed track/file scratch the surface of the CD.  Place the CD with the label side up.  The memory is almost full. Antennas
Playing tracks/files repeatedly (Repeat FM: Telescopic antenna
Play)
information Connecting optional components  After playing, store the CD in its case.  Clean the CD.  The internal memory is fragmented.
AM: Built-in ferrite bar antenna
After creating your own program, you can check  Take out the CD and leave the CD compartment To avoid the above problems, we recommend that
You can set the unit to repeatedly play CD-DA tracks information about programmed tracks/files. Note on DualDiscs open for about an hour to dry moisture you adhere to the following guidelines: Input
You can enjoy the sound from an optional AUDIO IN
on an audio CD, MP3/WMA files on a CD-R/CD-RW condensation.  Keep the total number of folders on a USB
Press DISPLAY  repeatedly and the display component, such as a portable digital music player,  A DualDisc is a two sided disc product which Stereo mini jack
disc, or MP3/WMA/AAC files on a USB device in device to 100 or less.
changes as follows: through the speakers of this unit. mates DVD recorded material on one side with  The CD-R/CD-RW is blank or unfinalized.  (USB) port
normal and program play modes.  Keep the total number of files per folder to 100
Be sure to turn off the power of each component digital audio material on the other side. However,  There are no playable MP3/WMA files on the disc. Type A, maximum current 500 mA, USB 2.0 Full Speed
Total number of steps  Last programmed track/
1 Press CD  or USB  to turn on the CD or file number
before making any connections. since the audio material side does not conform to
 There is a problem with the quality of the CD-R/
or less. compatible
For details, refer to the instruction manual of the the Compact Disc (CD) standard, playback on this CD-RW, recording device or application software.
USB function. Output
component to be connected. product is not guaranteed. Erroneous display  (headphones) stereo mini jack
2 Proceed as follows. To cancel Program Play  Replace all the batteries with new ones when the
Press   to stop playback, and then press PLAY OPR/BATT indicator  dims.  The data stored on the USB device may be For 16   32  impedance headphones
1 Connect the AUDIO IN jack  to the line Music discs encoded with copyright corrupted. Send the music data to the USB device
To repeat Do this MODE  repeatedly until “PGM” disappears from Supported audio formats
the display. output jack of the portable digital music protection technologies “noCD” appears when the disc is loaded. again. Supported bit rates
A single track/ 1 Press PLAY MODE 
player or other component using an audio  This product is designed to playback discs that  This unit can display only numbers and letters of MP3 (MPEG 1 Audio Layer-3):
file repeatedly until “ 1” appears.  No disc is set in the CD compartment. Set a disc. 32 kbps  320 kbps, VBR
To delete all tracks/files in the current connection cable (not supplied). conform to the Compact Disc (CD) standard. the alphabet. Other characters will not be
2 Press  or   to select Recently, various music discs encoded with  The CD may have a reading problem. Replace the WMA:
program displayed correctly.
a track/file that you want to 2 Turn the connected component on. copyright protection technologies are marketed disc. 48 kbps  192 kbps, VBR
Stop playback, and then press  . “noSTEP” AAC*:
repeat.
appears and you can create a new program,
3 Press AUDIO IN  and start playing sound on by some record companies. Please be aware that  The CD may be placed upside down. Place the The USB device is not recognized. 8 kbps  320 kbps, VBR
3 Press  . among those discs, there are some that do not disc with the label side up.
following the procedure “Creating your own the connected component.  Turn off the unit and reconnect the USB device, * USB function only
All tracks/files 1 Press PLAY MODE  program (Program Play).” The sound from the connected component is conform to the CD standard and may not be  An unplayable disc (DVD, BD, etc.) is loaded. then turn on the unit. Sampling frequencies
repeatedly until “ ” appears. output from the speakers. playable by this product. Replace the disc. MP3 (MPEG 1 Audio Layer-3):
 The USB device is not functioning properly. Refer
2 Press  . to the USB device operation manual for details on 32/44.1/48 kHz
To connect the unit to a TV or video recorder/ On safety “00” appears on the display when the disc WMA:
A selected folder 1 Press PLAY MODE  how to deal with this problem.
on an MP3/WMA repeatedly until “ ” and “ ” Presetting radio stations player, use an extension cable (not supplied) with
a stereo-mini jack on one end and two phono
 As the laser beam used in the CD player section is is loaded. 32/44.1/48 kHz
AAC*:
disc or USB appear. harmful to eyes, do not attempt to disassemble  No audio files recorded in supported formats, or a Play does not start. 32/44.1/48 kHz
plugs on the other end.
device 2 Select a folder by pressing + You can store radio stations in the unit’s memory. the casing. Refer servicing to qualified personnel file to be played back has an unsupported file * USB function only
 Turn off the unit and reconnect the USB device.
or  . You can preset up to 30 radio stations, 20 for FM and only. extension.
General
3 Press  . 10 for AM.  Should any solid object or liquid fall into the unit, Play does not start from the first track. Speaker
unplug the unit, and have it checked by qualified “Err C13” appears when the disc is loaded. Full range, 8 cm dia., 6 , cone type (2)
Programmed 1 Program tracks/files (see 1 Press FM/AM  repeatedly to turn on the  Set the play mode to Normal Play.
tracks/files “Creating your own program personnel before operating it any further.  The CD may be dirty. Clean the disc. Power output
(Program Play)”).
radio function and select the “FM” or “AM”  Discs with non-standard shapes (e.g., heart,  The CD may have scratches. Replace the disc. MP3/WMA/AAC files cannot be played 2.0 W + 2.0 W (at 6 , 10% harmonic distortion)
2 Press PLAY MODE  until band. square, star) cannot be played on this unit.  The CD may have a reading problem. Replace the back. Power requirements
“PGM” and “ ” appear on the 2 Hold down FM/AM  until “AUTO” flashes on Attempting to do so may damage the unit. Do not disc. Models for Europe, Australia, New Zealand, Bolivia, Chile,
 The audio files may have inappropriate file Paraguay, Peru, and Uruguay
display. use such discs.  A blank disc may be set in the CD compartment.
the display. extensions. The file extensions supported by this 230 V AC, 50 Hz (AC power supply)
3 Press  . unit are as follows: 9 V DC (6 R14 (size C) batteries)
On power sources The sound drops out.  MP3: file extension “.mp3” Models for Taiwan and Latin America (except for Bolivia,
 For AC operation, use the supplied AC power cord;  Reduce the volume.  WMA: file extension “.wma” Chile, Paraguay, Peru, and Uruguay)
To cancel Repeat Play do not use any other cord. 120 V AC, 60 Hz (AC power supply)
Press   to stop playback, and then press PLAY  Clean the CD, or replace it if the CD is badly  AAC: file extension “.m4a,” “.3gp” and “.mp4”
9 V DC (6 R14 (size C) batteries)
MODE  repeatedly until “ ” (or “ 1”) disappears  Unplug the unit from the wall outlet if it is not to damaged.
be used for an extended period of time.  The audio files may have been created in formats Korean model
from the display. 3 Press ENTER  to store the station.  Place the unit in a location free from vibrations. other than MP3/WMA/AAC formats. 220 V AC, 60 Hz (AC power supply)
 When not using the batteries, remove them to
The stations are stored in memory from lower  Clean the lens with a commercially available  The USB storage device uses a file system other 9 V DC (6 R14 (size C) batteries)
avoid damage that can be caused by battery
Playing tracks/files in random order frequencies to higher ones. leakage or corrosion.
blower. than FAT16 or FAT32.* Other models
(Shuffle Play)  The sound may drop out or noise may be heard  The files are encrypted or protected by passwords. 220 V  240 V AC, 50/60 Hz (AC power supply)
when using a poor quality CD-R/CD-RW or if there 9 V DC (6 R14 (size C) batteries)
You can set the unit to play CD-DA tracks on an If a station cannot be preset On placement
is a problem with the recording device or * This unit supports FAT16 and FAT32, but some USB storage Power consumption
audio CD, MP3/WMA files on a CD-R/CD-RW disc or automatically  Do not leave the unit in a location near heat application software. media may not support both file systems. 15 W
MP3/WMA/AAC files on a USB device in random You need to preset a station with a weak signal sources, in a place subject to direct sunlight, 0.9 W (during standby mode)
order. For details, refer to the operation manual of the USB
manually. excessive dust or mechanical shock, or in a car Battery Life*1, *2
Starting playback takes more time than storage device in question or contact the manufacturer. Playback of CD
1 Press CD  or USB  to turn on the CD or subject to the direct rays of the sun.
1 Press FM/AM  repeatedly to select a band. usual. Approx. 9 hours
USB function.  Do not place the unit on an inclined or unstable Radio Playback of USB device
2 Tune to the desired station. surface.  The following discs take a longer time to start Approx. 11 hours (at 100 mA load)
2 Press PLAY MODE  repeatedly until “ ” 3 Hold down ENTER  until “FM-xx” or “AM-xx” playback. Approx. 3 hours (at 500 mA load)
 Do not place anything within 10 mm of the rear of  A disc recorded with a complicated tree The sound is weak or reception is poor. FM reception
appears on the display. flashes on the display. the cabinet. The ventilation openings must be
structure.  Replace all the batteries with new ones. Approx. 26 hours
3 Press   to start Shuffle Play. (Example: FM) unobstructed for the unit to operate properly and
 A disc that has many folders or non-MP3/WMA  Move the unit away from nearby TVs. *1 Measured by Sony standards. The actual battery life
prolong the life of its components.
To cancel Shuffle Play files.  For FM reception, extend the antenna to its full may vary depending on the circumstances of the unit
 Since a strong magnet is used for the speakers, or operating conditions.
Press   to stop playback, and then press PLAY keep personal credit cards using magnetic coding length, and reorient it for best FM reception. For
USB device AM reception, reorient the unit itself to find the *2 When using Sony alkaline batteries.
MODE  repeatedly until “ ” disappears from the or spring-wound watches away from the unit to
display. prevent possible damage from the magnet. best reception. Dimensions
The USB device does not work properly. Approx. 300 mm × 125 mm × 210.5 mm (W/H/D) (incl.
4 Press PRESET + or   until the preset  If you are in a building, listen near a window. projecting parts)
Tip
On operation  If you connect an incompatible USB device, the  If a mobile phone is placed close to the unit, a
During Shuffle Play, you cannot select the previous track/file number for the station you want flashes on following problems may occur.
Mass
by pressing  .  If the unit is brought directly from a cold to a loud noise may be heard from the unit. Keep the Approx. 2 kg (incl. batteries)
the display.  The USB device is not recognized. phone away from the unit.
warm location, or is placed in a very damp room,
5 Press ENTER  to store the station. moisture may condense on the lens inside the CD  File or folder names are not displayed on this Supplied accessories
AC power cord (1)
If another station is already assigned to the player section. Should this occur, the unit will not unit. The TV picture is unstable.
selected preset number, that station is replaced operate properly. In this case, remove the CD and  Playback is not possible.  If you are listening to an FM program near a TV Design and specifications are subject to change without
by the new one. wait about an hour for the moisture to evaporate.  The sound skips. with an indoor antenna, move the unit away from notice.
 There is noise. the TV.
Tip
The preset radio stations remain in the unit’s memory even
On handling the unit  The sound output is distorted.
in the following situations.  Do not leave the CD compartment open to avoid After trying the suggested remedies, if the problem
The AC power cord is unplugged. dust and debris contamination. “Err C13” appears. persists, unplug the AC power cord or remove all the
The batteries are removed. batteries. After all the indications on the display
 An unexpected error occurs in the connected
On cleaning the cabinet device. disappear, plug in the AC power cord again, or
 Clean the cabinet, panel and controls using a soft  An unknown device is connected. re-insert the batteries. If the problem persists,
cloth slightly moistened with a mild detergent consult your nearest Sony dealer.
solution. Do not use any type of abrasive pad,
scouring powder, or solvent, such as alcohol or
benzine.

If you have any questions or problems concerning

your unit, consult your nearest Sony dealer.