Lavalier microphone for smart-
phones and tablets
    USER MANUAL
Contents
Table of Contents
Contents2
English3
 iRig Mic Lav3
 Register your iRig Mic Lav3
 Installation and setup4
 Mounting iRig Mic Lav on clothing5
 Tips5
 Connecting two iRig Mic Lavs or headphones6
 Troubleshooting7
 Specifications7
 Warranty8
 Support and more info8
                      2
English
iRig Mic Lav
Thank you for purchasing iRig Mic Lav, the chainable mobile lavalier microphone for all mobile devices.
Your package contains:
•   iRig Mic Lav
•   Removable pop shield
•   Mounting clip
                                                                                    1x
•   Carrying case
•   Quick start guide
•   Registration card                                                       1x
                                                                                    1x
                                                                     1x
The iRig Mic Lav is your audio solution for film, television or broadcasting scenarios. This lavalier mic provides
convenient, high-quality audio, right into your smartphone or tablet. The iRig Mic Lav is equipped with an
omnidirectional condenser microphone that picks up sound from all directions, and the foam pop filter eliminates
vocal plosives and wind noises. Any app that accepts input from a headset connection is compatible with the
iRig Mic Lav. More, thanks to the in-line connector it is possible to connect a second iRig Mic Lav or a pair of
headphones.
Register your iRig Mic Lav
By registering, you can access technical support, activate your warranty and receive free JamPoints™ which will
be added to your account. JamPoints™ allow you to obtain discounts on future IK purchases! Registering also
keeps you informed of all the latest software updates and IK products.
Register at: www.ikmultimedia.com/registration
                                                        3
English
Installation and setup
1. Insert the pop shield and secure the clip near the sound source.
2. Connect the TRRS connector to your device.
3. Before connecting a second iRig Mic Lav or a pair of headphones, make sure to select the right switch
   position.
           1                           2
                                                       4
English
4. Download your favorite app and launch it.
            iRig Recorder
               EZ Voice
               VocaLive
     ikdownloads.com/irigmiclav
Mounting iRig Mic Lav on clothing
Attach iRig Mic Lav to a lapel or piece of clothing. For best results place it about 15-20cm (or 6 inches) from
your subject’s face.
Tip: Tape a loose loop in the mic cord to the inside of the clothing. This gives you added strain relief and
isolation from unwanted noise.
Tips
Attach the iRig Mic Lav upside down to reduce excessive breath noises and tonal inconsistencies due to head
movements.
It is safest to use the windshield at all times to avoid plosives and wind noise, even when recording inside.
                                                         5
English
Connecting two iRig Mic Lavs or headphones
                 1                        2
Thanks to the female 1/8” TRRS connector on the in-line connector it is possible to connect either a second iRig
Mic Lav or a headphone.
The side switch allows you to select between a pair of headphones and a second microphone.
WARNING: BEFORE you connect a second iRig Mic Lav or an headphone, make sure to select the
correct switch position.
         1                           2
                                                       6
English
                                                                    On the first iRig Mic Lav
                                                                    On the second iRig Mic Lav
The possible configurations are:
•   One iRig Mic Lav connected to the device and a pair of headphones (switch in “HP” position);
•   Two iRig Mic Lavs connected (switch position on “2nd Mic” on the first microphone) and a pair of
    headphones (switch position on “HP” on the second microphone).
Troubleshooting
I have connected a second iRig Mic Lav but it doesn’t seem to work.
Remember to always select the correct position on the switch (“2nd Mic” position) BEFORE you connect the
second microphone.
I have connected a pair of headphones but the mic doesn’t seem to work properly.
Remember to always select the correct position on the switch (“HP” position) BEFORE you connect your
headphone.
Specifications
Transducer type: condenser, electret
Polar pattern: omnidirectional
Frequency response: 30 Hz - 16 kHz, -3dB
Max SPL: 120dB SPL
Sensitivity: -35±3dB at 1 kHz, 0dB=1V/Pa
Capsule diameter: 6mm
Cable length: 150cm
Output connector: 1/8” TRRS
                                                       7
English
Warranty
Please visit:
www.ikmultimedia.com/warranty
for the complete warranty policy.
Support and more info
www.ikmultimedia.com/support
www.irigmiclav.com
                                    8
iRig® Mic Lav is a registered trademark property of IK Multimedia Srl. All other product names and images, trademarks and artists names are the property of their respective owners, which are in no
way associated or affiliated with IK Multimedia. iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.. Android
is a trademark of Google Inc.. Google Play is a trademark of Google Inc...
                                                                                                                                                                                              2015/06/16
                                                                                                    9