OSHA Self-Inspection

Company Name Date of Inspection Inspector

INSTRUCTIONS
This checklist is designed to conduct a self-inspection of your workplace to identify potential hazards and ensure compliance with Occupational Safety and Health
Administration (OSHA) regulations. Carefully review each item and mark the corresponding checkbox to indicate compliance or note any observations and areas for
improvement. Use the "Notes/Observations" section to provide additional details, corrective actions, and any required follow-up.

1. GENERAL SAFETY

Adequate signage is displayed for safety procedures and hazards. Yes No NA

Safety manuals and guidelines are accessible to all employees. Yes No NA

Emergency contact information is prominently posted. Yes No NA

First aid kits and emergency response equipment are readily available. Yes No NA

Observations/Notes:
[Insert OSHA self-inspection observations
and corrective actions, if any]

2. PERSONAL PROTECTIVE EQUIPMENT (PPE)

Employees wear the required PPE for their job tasks. Yes No NA

PPE is in good condition and properly fitted for each employee. Yes No NA

Additional specialized PPE (e.g., fall protection, respiratory protection) is provided where needed. Yes No NA

Adequate supplies of PPE are available for all employees. Yes No NA

Observations/Notes:
[Insert OSHA self-inspection observations
and corrective actions, if any]

3. HAZARD COMMUNICATION

Chemicals are properly labeled, stored, and handled. Yes No NA

Material Safety Data Sheets (MSDS) are accessible to employees. Yes No NA

Employees are trained on the hazards and safe handling of chemicals. Yes No NA

Spill kits and emergency response procedures are in place. Yes No NA

Observations/Notes:
[Insert OSHA self-inspection observations
and corrective actions, if any]
4. FIRE SAFETY

Fire extinguishers are present, visible, and not obstructed. Yes No NA

Emergency exits are clearly marked and free from obstructions. Yes No NA

Fire alarms and sprinkler systems are functional and tested regularly. Yes No NA

Employees are trained in fire evacuation procedures. Yes No NA

Observations/Notes:
[Insert OSHA self-inspection observations
and corrective actions, if any]

5. ELECTRICAL SAFETY

Electrical installations comply with safety regulations and codes. Yes No NA

Electrical panels and circuits are properly labeled and accessible. Yes No NA

Power cords and plugs are in good condition, without fraying. Yes No NA

Ground fault circuit interrupters (GFCIs) are installed where required. Yes No NA

Observations/Notes:
[Insert OSHA self-inspection observations
and corrective actions, if any]

6. MACHINE AND EQUIPMENT SAFETY

Equipment is guarded and has safety interlocks in place. Yes No NA

Emergency stop buttons are clearly marked and easily accessible. Yes No NA

Lockout/Tagout procedures are followed during maintenance. Yes No NA

Employees use the correct tools and follow safe operating procedures. Yes No NA

Observations/Notes:
[Insert OSHA self-inspection observations
and corrective actions, if any]

7. LIFTING AND MATERIAL HANDLING

Safe lifting and material handling practices are observed. Yes No NA

Mechanical lifting equipment is inspected and certified. Yes No NA

Workers are trained in material handling safety techniques. Yes No NA

Heavy materials are securely stacked and stored to prevent collapse. Yes No NA

Observations/Notes:
[Insert OSHA self-inspection observations
and corrective actions, if any]
8. WALKING AND WORKING SURFACES

Walking surfaces are free from slip, trip, and fall hazards. Yes No NA

Stairways and ramps are in good condition and properly maintained. Yes No NA

Guardrails and handrails are in place where required. Yes No NA

Floors are kept clean and dry, and spills are promptly cleaned up. Yes No NA

Observations/Notes:
[Insert OSHA self-inspection observations
and corrective actions, if any]

9. CONFINED SPACES

Confined spaces are identified and appropriately labeled. Yes No NA

Confined space entry procedures are followed when applicable. Yes No NA

Atmospheric testing is conducted before entering confined spaces. Yes No NA

Proper permits are obtained for confined space entry. Yes No NA

Observations/Notes:
[Insert OSHA self-inspection observations
and corrective actions, if any]

10. EMERGENCY PREPAREDNESS

Emergency response plans are posted, and employees are familiar with them. Yes No NA

Evacuation routes and assembly points are clearly marked. Yes No NA

First aid kits and medical emergency procedures are accessible. Yes No NA

Employees are trained in emergency response and evacuation procedures. Yes No NA

Observations/Notes:
[Insert OSHA self-inspection observations
and corrective actions, if any]

NOTES/OBSERVATIONS
[Insert any additional notes or OSHA self-inspection observations made during the inspection]
STATEMENT OF COMMITMENT
I hereby certify that I have conducted the above OSHA self-inspection and commit to addressing any identified hazards and areas for
improvement promptly.

Observer's Name : Signature :

Date :

APPROVED BY

Name : Signature :

Date :

Inspec�on template by: