Scribd
Upload
1K views1 page

Test Certificate: D & H Secheron Electrodes Pvt. LTD

This test certificate provides the chemical composition, mechanical properties, and test results for NORMA -V 4.00 X 450 MM welding electrodes manufactured by D & H SECHERON ELECTRODES PVT. LTD. on September 9, 2023. The chemical composition and mechanical properties met the requirements for ASME section-II, Part-C Edition 2023. Radiography and fillet weld tests were also satisfactory. The electrodes conform to AWS/SFA:5.1 - E6013 standards.

Uploaded by

rahulkhokhar2023
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

Test Certificate: D & H Secheron Electrodes Pvt. LTD

This test certificate provides the chemical composition, mechanical properties, and test results for NORMA -V 4.00 X 450 MM welding electrodes manufactured by D & H SECHERON ELECTRODES PVT. LTD. on September 9, 2023. The chemical composition and mechanical properties met the requirements for ASME section-II, Part-C Edition 2023. Radiography and fillet weld tests were also satisfactory. The electrodes conform to AWS/SFA:5.1 - E6013 standards.

Uploaded by

rahulkhokhar2023
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TEST CERTIFICATE

D & H SECHERON ELECTRODES PVT. LTD.


Serial No :2023/U12/0100 Brand Name & Size(mm):NORMA -V 4.00 X 450 MM
Date of issue :25-11-2023 Batch No:U12200100 Date of Mfg:09-09-2023
PO No. & Date :
TDC No. & Date :

Chemical Composition of all Weld Metal wt. (%):


C 0.064
Mn 0.423
Si 0.302
S 0.023
P 0.036
Cr 0.023
Ni 0.021
Mo 0.001
V 0.012
Cu 0.010

Mechanical Properties of All Weld Metal:


Test Condition As Welded
Y.S. 0.2% offset (MPa) 406.0
U.T.S. (MPa) 442.0
Elongation (%) 26.0
CVN Impact Energy (Joules Test Temp. at °C ) 0
CVN Impact (Joules) 64, 58, 50, 48, 50
Radiography Satisfactory
Fillet Weld Test Satisfactory
Special Requirements :

Test Conducted as per : AWS/SFA:5.1 - E6013


As per EN 10204 Type : 3.1
We certify that supply made against this TC conforms to all the requirements of ASME section-II, Part-C Edition 2023
in all respects. This clause is applicable for products identified to AWS code only.
Issued To: Checked By:
Signature valid
Digitally signed by S Satheesh Kumar
Date: 2023.11.25 15:26:33 +05:30
Reason: Digital Sign
Location: DGM - QA & QC
Authorised Signatory(QA/QC)
Head office: 44-46 Industrial Estate, Kila Maidan, Post Bag No 3, Indore - 452006 (M.P.) INDIA,
Tel:+91-731 4229240/41, Fax:+917314229260, Email:qc@dnhsecheron.net, tsd@dnhsecheron.net
This is the system generated test certificate signature not required.
QC-21/Rev.No.08/Dated:Aug-2021

You might also like