Scribd
Upload
258 views2 pages

Repsol Telex HVLP 32

This document describes a lubricant designed for hydraulic circuits that experience sudden temperature changes and require anti-wear properties. The base oils are refined to have a high viscosity index and oxidation resistance. Additives enhance the oils' anti-wear properties and performance in a wide temperature range. These lubricants meet various industry specifications and standards. They are suitable for hydraulic systems in construction machinery and marine equipment operating in various conditions.

Uploaded by

ibrahim maulana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
258 views2 pages

Repsol Telex HVLP 32

This document describes a lubricant designed for hydraulic circuits that experience sudden temperature changes and require anti-wear properties. The base oils are refined to have a high viscosity index and oxidation resistance. Additives enhance the oils' anti-wear properties and performance in a wide temperature range. These lubricants meet various industry specifications and standards. They are suitable for hydraulic systems in construction machinery and marine equipment operating in various conditions.

Uploaded by

ibrahim maulana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TELEX HVLP

INDUSTRY
Lubricants

Description
The base oils used to manufacture this group of products have been carefully refined to obtain a high viscosity
index and excellent resistance to oxidation. Its constituent additives, as well as enhancing these natural
characteristics, provide this lubricant with exceptional anti-wear properties and temperature performance.
These oils are specially designed for hydraulic circuits subjected to sudden temperature changes in which oils
are also required to have greater anti-wear properties. They are specifically suited to hydraulic circuits
exposed to the elements or with low working temperatures, as well as equipment requiring viscosity variations
that are significantly lower than in standard fluids, and hydraulic systems used at sea (watertight doors,
capstans and windlasses, stabilisers, etc.). Excellent performance in hydraulic systems for all kinds of public
works machinery.

Properties
 High resistance to oxidation, ageing and sludge formation.
 Excellent water separation.
 Outstanding anti-wear properties.
 Very good anti-foaming qualities.
 Very high viscosity index.
 Effective protection of metals against corrosion.
 Compatible with the joints habitually used in hydraulic circuits.
 Great load-bearing capacity.

Quality levels, approvals and recommendations


In accordance with the product's viscosity grade, it complies with the following quality standards:
 DIN-51524 Part 3 HVLP  AFNOR NF E 48-603 HV
 ISO 6743/4 HV  FILTERABILITY AFNOR (NF E 48-690 and 48-
 ISO 11158 691)
 Fives Cincinnati: P-68 (ISO 32); P-69 (ISO  Eaton Vickers I-286-S and M-2950-S
68); P-70 (ISO 46)  IBERCISA (ISO 32 and 46)*
 THYSSENKRUPP (ISO 32, 46 and 68)*
 Manuli Hydraulics (ISO 46)*
* Formal approval

A safety data sheet is available on request.

repsol.com
+34 901 111 999
lubricantes@repsol.com

Technical data sheet for Lubricants. Revision 9. July 2020.


.
TELEX HVLP

INDUSTRY
Lubricants

Technical specifications

UNIT METHOD VALUE

ISO Viscosity Grade 15 22 32 46 68


Viscosity at 100 ºC cSt ASTM D 445 4.0 4.9 6.2 8.2 11.3
Viscosity at 40 ºC cSt ASTM D 445 15 22 32 46 68
Viscosity index ASTM D 2270 145 150 150 150 150
Density at 15 ºC g/cm3 ASTM D 4052 0.859 0.864 0.868 0.871 0.879
Flash point ºC ASTM D 92 180 198 220 226 242
Pour point ºC ASTM D 97 -45 -39 -33 -33 -33
De-emulsification at 54 ºC Min ASTM D 1401 <25 <25 <25 <30 <45
Rust resistance, A and B ASTM D 665 Pass Pass Pass Pass Pass
Aeroemulsion at 50 ºC min ASTM D 3427 <1 <2 <2 <4 <5
Copper corrosion 3 h at 100 ºC ASTM D 130 1b 1b 1b 1b 1b
TAN mg KOH/g ASTM D 664 0.5 0.5 0.38 0.38 0.38
Oxidation, acid number at 2000 h mg KOH/g ASTM D 943 2 max. 2 max. 2 max. 2 max. 2 max.
FZG, damage stage DIN 51354 11 11 12 12 12

The above mentioned characteristics are typical values and should not be considered product specifications.

A safety data sheet is available on request.

repsol.com
+34 901 111 999
lubricantes@repsol.com

Technical data sheet for Lubricants. Revision 9. July 2020.


.

You might also like